| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| /include/ "msmcopper_pm.dtsi" |
| /include/ "msm-pm8841.dtsi" |
| /include/ "msm-pm8941.dtsi" |
| /include/ "msmcopper-regulator.dtsi" |
| /include/ "msmcopper-gpio.dtsi" |
| |
| / { |
| model = "Qualcomm MSM Copper"; |
| compatible = "qcom,msmcopper"; |
| interrupt-parent = <&intc>; |
| |
| intc: interrupt-controller@F9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xF9000000 0x1000>, |
| <0xF9002000 0x1000>; |
| }; |
| |
| msmgpio: gpio@fd400000 { |
| compatible = "qcom,msm-gpio"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0xfd400000 0x4000>; |
| }; |
| |
| timer { |
| compatible = "qcom,msm-qtimer", "arm,armv7-timer"; |
| interrupts = <1 2 0 1 3 0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| serial@f991f000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf991f000 0x1000>; |
| interrupts = <0 109 0>; |
| }; |
| |
| serial@f995e000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf995e000 0x1000>; |
| interrupts = <0 114 0>; |
| }; |
| |
| usb@f9a55000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0xf9a55000 0x400>; |
| interrupts = <0 134 0>; |
| HSUSB_VDDCX-supply = <&pm8841_s2>; |
| HSUSB_1p8-supply = <&pm8941_l6>; |
| HSUSB_3p3-supply = <&pm8941_l24>; |
| |
| qcom,hsusb-otg-phy-type = <2>; |
| qcom,hsusb-otg-mode = <1>; |
| qcom,hsusb-otg-otg-control = <1>; |
| }; |
| |
| qcom,sdcc@f980b000 { |
| cell-index = <1>; |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf980b000 0x1000>; |
| interrupts = <0 123 0>; |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000 96000000 192000000>; |
| qcom,sdcc-sup-voltages = <3300 3300>; |
| qcom,sdcc-bus-width = <8>; |
| qcom,sdcc-hs200; |
| qcom,sdcc-nonremovable; |
| qcom,sdcc-disable_cmd23; |
| }; |
| |
| qcom,sdcc@f984b000 { |
| cell-index = <3>; |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf984b000 0x1000>; |
| interrupts = <0 127 0>; |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000>; |
| qcom,sdcc-sup-voltages = <3300 3300>; |
| qcom,sdcc-bus-width = <4>; |
| qcom,sdcc-disable_cmd23; |
| }; |
| |
| qcom,sps@f9980000 { |
| compatible = "qcom,msm_sps"; |
| reg = <0xf9984000 0x15000>, |
| <0xf9999000 0xb000>; |
| interrupts = <0 94 0>; |
| |
| qcom,bam-dma-res-pipes = <6>; |
| }; |
| |
| spi@f9924000 { |
| compatible = "qcom,spi-qup-v2"; |
| reg = <0xf9924000 0x1000>; |
| interrupts = <0 96 0>; |
| spi-max-frequency = <24000000>; |
| }; |
| |
| slim@fe12f000 { |
| cell-index = <1>; |
| compatible = "qcom,slim-msm"; |
| reg = <0xfe12f000 0x35000>, |
| <0xfe104000 0x20000>; |
| reg-names = "slimbus_physical", "slimbus_bam_physical"; |
| interrupts = <0 163 0 0 164 0>; |
| interrupt-names = "slimbus_irq", "slimbus_bam_irq"; |
| qcom,min-clk-gear = <10>; |
| }; |
| |
| qcom,spmi@fc4c0000 { |
| cell-index = <0>; |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0xfc4cf000 0x1000>, |
| <0Xfc4cb000 0x1000>; |
| /* 190,ee0_krait_hlos_spmi_periph_irq */ |
| /* 187,channel_0_krait_hlos_trans_done_irq */ |
| interrupts = <0 190 0 0 187 0>; |
| qcom,pmic-arb-ee = <0>; |
| qcom,pmic-arb-channel = <0>; |
| qcom,pmic-arb-ppid-map = <0x13000000>, /* PM8941_LDO1 */ |
| <0x13100001>, /* PM8941_LDO2 */ |
| <0x13200002>, /* PM8941_LDO3 */ |
| <0x13300003>, /* PM8941_LDO4 */ |
| <0x13400004>, /* PM8941_LDO5 */ |
| <0x13500005>, /* PM8941_LDO6 */ |
| <0x13600006>, /* PM8941_LDO7 */ |
| <0x13700007>, /* PM8941_LDO8 */ |
| <0x13800008>, /* PM8941_LDO9 */ |
| <0x13900009>, /* PM8941_LDO10 */ |
| <0x13a0000a>, /* PM8941_LDO11 */ |
| <0x13b0000b>, /* PM8941_LDO12 */ |
| <0x13c0000c>, /* PM8941_LDO13 */ |
| <0x13d0000d>, /* PM8941_LDO14 */ |
| <0x13e0000e>, /* PM8941_LDO15 */ |
| <0x13f0000f>, /* PM8941_LDO16 */ |
| <0x14000010>, /* PM8941_LDO17 */ |
| <0x14100011>, /* PM8941_LDO18 */ |
| <0x14200012>, /* PM8941_LDO19 */ |
| <0x14300013>, /* PM8941_LDO20 */ |
| <0x14400014>, /* PM8941_LDO21 */ |
| <0x14500015>, /* PM8941_LDO22 */ |
| <0x14600016>, /* PM8941_LDO23 */ |
| <0x14700017>, /* PM8941_LDO24 */ |
| <0x14800018>, /* PM8941_LDO25 */ |
| <0x14900019>, /* PM8941_LDO26 */ |
| <0x0c00001a>, /* PM8941_GPIO1 */ |
| <0x0c10001b>, /* PM8941_GPIO2 */ |
| <0x0c20001c>, /* PM8941_GPIO3 */ |
| <0x0c30001d>, /* PM8941_GPIO4 */ |
| <0x0c40001e>, /* PM8941_GPIO5 */ |
| <0x0c50001f>, /* PM8941_GPIO6 */ |
| <0x0c600020>, /* PM8941_GPIO7 */ |
| <0x0c700021>, /* PM8941_GPIO8 */ |
| <0x0c800022>, /* PM8941_GPIO9 */ |
| <0x0c900023>, /* PM8941_GPIO10 */ |
| <0x0ca00024>, /* PM8941_GPIO11 */ |
| <0x0cb00025>, /* PM8941_GPIO12 */ |
| <0x0cc00026>, /* PM8941_GPIO13 */ |
| <0x0cd00027>, /* PM8941_GPIO14 */ |
| <0x0ce00028>, /* PM8941_GPIO15 */ |
| <0x0cf00029>, /* PM8941_GPIO16 */ |
| <0x0d00002a>, /* PM8941_GPIO17 */ |
| <0x0d10002b>, /* PM8941_GPIO18 */ |
| <0x0d20002c>, /* PM8941_GPIO19 */ |
| <0x0d30002d>, /* PM8941_GPIO20 */ |
| <0x0d40002e>, /* PM8941_GPIO21 */ |
| <0x0d50002f>, /* PM8941_GPIO22 */ |
| <0x0d600030>, /* PM8941_GPIO23 */ |
| <0x0d700031>, /* PM8941_GPIO24 */ |
| <0x0d800032>, /* PM8941_GPIO25 */ |
| <0x0d900033>, /* PM8941_GPIO26 */ |
| <0x0da00034>, /* PM8941_GPIO27 */ |
| <0x0db00035>, /* PM8941_GPIO28 */ |
| <0x0dc00036>, /* PM8941_GPIO29 */ |
| <0x0dd00037>, /* PM8941_GPIO30 */ |
| <0x0de00038>, /* PM8941_GPIO31 */ |
| <0x0df00039>, /* PM8941_GPIO32 */ |
| <0x0e00003a>, /* PM8941_GPIO33 */ |
| <0x0e10003b>, /* PM8941_GPIO34 */ |
| <0x0e20003c>, /* PM8941_GPIO35 */ |
| <0x0e30003d>, /* PM8941_GPIO36 */ |
| <0x0280003e>, /* COINCELL */ |
| <0x0100003f>, /* SMBC_OVP */ |
| <0x01100040>, /* SMBC_CHG */ |
| <0x01200041>, /* SMBC_BIF */ |
| <0x00500042>, /* INTERRUPT */ |
| <0x00100043>, /* PM8941_0 */ |
| <0x20100044>, /* PM8841_0 */ |
| <0x10100045>, /* PM8941_1 */ |
| <0x30100046>, /* PM8841_1 */ |
| <0x00800047>, /* PON0 */ |
| <0x20800048>, /* PON1 */ |
| <0x11000049>, /* PM8941_SMPS1 */ |
| <0x1110004a>, /* PM8941_SMPS2 */ |
| <0x1120004b>, /* PM8941_SMPS3 */ |
| <0x3100004c>, /* PM8841_SMPS1 */ |
| <0x3110004d>, /* PM8841_SMPS2 */ |
| <0x3120004e>, /* PM8841_SMPS3 */ |
| <0x3130004f>, /* PM8841_SMPS4 */ |
| <0x31400050>, /* PM8841_SMPS5 */ |
| <0x31500051>, /* PM8841_SMPS6 */ |
| <0x31600052>, /* PM8841_SMPS7 */ |
| <0x31700053>, /* PM8841_SMPS8 */ |
| <0x05000054>, /* SHARED_XO */ |
| <0x05100055>, /* BB_CLK1 */ |
| <0x05200056>, /* BB_CLK2 */ |
| <0x05900057>, /* SLEEP_CLK */ |
| <0x07000058>, /* PBS_CORE */ |
| <0x07100059>, /* PBS_CLIENT1 */ |
| <0x0720005a>; /* PBS_CLIENT2 */ |
| }; |
| |
| i2c@f9966000 { |
| cell-index = <0>; |
| compatible = "qcom,i2c-qup"; |
| reg = <0Xf9966000 0x1000>; |
| reg-names = "qup_phys_addr"; |
| interrupts = <0 104 0>; |
| interrupt-names = "qup_err_intr"; |
| qcom,i2c-bus-freq = <100000>; |
| qcom,i2c-src-freq = <24000000>; |
| }; |
| |
| qcom,acpuclk@f9000000 { |
| compatible = "qcom,acpuclk-copper"; |
| }; |
| |
| qcom,ssusb@F9200000 { |
| compatible = "qcom,dwc-usb3-msm"; |
| reg = <0xF9200000 0xCCFF>; |
| interrupts = <0 131 0>; |
| qcom,dwc-usb3-msm-dbm-eps = <4>; |
| }; |
| |
| qcom,lpass@fe200000 { |
| compatible = "qcom,pil-q6v5-lpass"; |
| reg = <0xfe200000 0x00100>, |
| <0xfe000000 0x40000>, |
| <0xfd485100 0x00010>; |
| |
| qcom,firmware-name = "lpass"; |
| }; |
| |
| qcom,pronto@fb21b000 { |
| compatible = "qcom,pil-pronto"; |
| reg = <0xfb21b000 0x3000>, |
| <0xfc401700 0x4>, |
| <0xfd485300 0xc>; |
| vdd_pronto_pll-supply = <&pm8941_l12>; |
| |
| qcom,firmware-name = "wcnss"; |
| }; |
| }; |