arch/arm/mach-msm/board-msm7627a-wlan.c - fp2-dev/kernel/msm - Gitiles

 /* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <asm/mach-types.h>
 #include <mach/rpc_pmapp.h>
 #include "board-msm7627a.h"
 #include "devices-msm7x2xa.h"
 #include "timer.h"

 #define GPIO_WLAN_3V3_EN 119
 static const char *id = "WLAN";

 enum {
 	WLAN_VREG_S3 = 0,
 	WLAN_VREG_L17,
 	WLAN_VREG_L19
 };

 struct wlan_vreg_info {
 	const char *vreg_id;
 	unsigned int level_min;
 	unsigned int level_max;
 	unsigned int pmapp_id;
 	unsigned int is_vreg_pin_controlled;
 	struct regulator *reg;
 };

 static struct wlan_vreg_info vreg_info[] = {
 	{"msme1",     1800000, 1800000, 2,  0, NULL},
 	{"bt",        3300000, 3300000, 21, 1, NULL},
 	{"wlan4",     1800000, 1800000, 23, 1, NULL}
 };

 int gpio_wlan_sys_rest_en = 134;
 static void gpio_wlan_config(void)
 {
 	if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
 					|| machine_is_msm8625_evb()
 					|| machine_is_msm7627a_qrd3()
 					|| machine_is_msm8625_qrd7())
 		gpio_wlan_sys_rest_en = 124;
 }

 static unsigned int qrf6285_init_regs(void)
 {
 	struct regulator_bulk_data regs[ARRAY_SIZE(vreg_info)];
 	int i = 0, rc = 0;

 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
 		regs[i].supply = vreg_info[i].vreg_id;
 		regs[i].min_uV = vreg_info[i].level_min;
 		regs[i].max_uV = vreg_info[i].level_max;
 	}

 	rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs), regs);
 	if (rc) {
 		pr_err("%s: could not get regulators: %d\n", __func__, rc);
 		goto out;
 	}

 	for (i = 0; i < ARRAY_SIZE(regs); i++)
 		vreg_info[i].reg = regs[i].consumer;

 out:
 	return rc;
 }

 static unsigned int setup_wlan_gpio(bool on)
 {
 	int rc = 0;

 	if (on) {
 		rc = gpio_direction_output(gpio_wlan_sys_rest_en, 1);
 		msleep(100);
 	} else {
 		gpio_set_value_cansleep(gpio_wlan_sys_rest_en, 0);
 		rc = gpio_direction_input(gpio_wlan_sys_rest_en);
 		msleep(100);
 	}

 	if (rc)
 		pr_err("%s: WLAN sys_reset_en GPIO: Error", __func__);

 	return rc;
 }

 static unsigned int setup_wlan_clock(bool on)
 {
 	int rc = 0;

 	if (on) {
 		/* Vote for A0 clock */
 		rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
 					PMAPP_CLOCK_VOTE_ON);
 	} else {
 		/* Vote against A0 clock */
 		rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
 					 PMAPP_CLOCK_VOTE_OFF);
 	}

 	if (rc)
 		pr_err("%s: Configuring A0 clock for WLAN: Error", __func__);

 	return rc;
 }

 static unsigned int wlan_switch_regulators(int on)
 {
 	int rc = 0, index = 0;

 	if (machine_is_msm7627a_qrd1())
 		index = 2;

 	for ( ; index < ARRAY_SIZE(vreg_info); index++) {
 		if (on) {
 			rc = regulator_set_voltage(vreg_info[index].reg,
 						vreg_info[index].level_min,
 						vreg_info[index].level_max);
 			if (rc) {
 				pr_err("%s:%s set voltage failed %d\n",
 					__func__, vreg_info[index].vreg_id, rc);
 				goto reg_disable;
 			}

 			rc = regulator_enable(vreg_info[index].reg);
 			if (rc) {
 				pr_err("%s:%s vreg enable failed %d\n",
 					__func__, vreg_info[index].vreg_id, rc);
 				goto reg_disable;
 			}

 			if (vreg_info[index].is_vreg_pin_controlled) {
 				rc = pmapp_vreg_lpm_pincntrl_vote(id,
 						vreg_info[index].pmapp_id,
 						PMAPP_CLOCK_ID_A0, 1);
 				if (rc) {
 					pr_err("%s:%s pincntrl failed %d\n",
 						__func__,
 						vreg_info[index].vreg_id, rc);
 					goto pin_cnt_fail;
 				}
 			}
 		} else {
 			if (vreg_info[index].is_vreg_pin_controlled) {
 				rc = pmapp_vreg_lpm_pincntrl_vote(id,
 						vreg_info[index].pmapp_id,
 						PMAPP_CLOCK_ID_A0, 0);
 				if (rc) {
 					pr_err("%s:%s pincntrl failed %d\n",
 						__func__,
 						vreg_info[index].vreg_id, rc);
 					goto pin_cnt_fail;
 				}
 			}

 			rc = regulator_disable(vreg_info[index].reg);
 			if (rc) {
 				pr_err("%s:%s vreg disable failed %d\n",
 					__func__,
 					vreg_info[index].vreg_id, rc);
 				goto reg_disable;
 			}
 		}
 	}
 	return 0;
 pin_cnt_fail:
 	if (on)
 		regulator_disable(vreg_info[index].reg);
 reg_disable:
 	if (!machine_is_msm7627a_qrd1()) {
 		while (index) {
 			if (on) {
 				index--;
 				regulator_disable(vreg_info[index].reg);
 				regulator_put(vreg_info[index].reg);
 			}
 		}
 	}
 	return rc;
 }

 static unsigned int msm_AR600X_setup_power(bool on)
 {
 	int rc = 0;
 	static bool init_done;

 	if (unlikely(!init_done)) {
 		gpio_wlan_config();
 		rc = qrf6285_init_regs();
 		if (rc) {
 			pr_err("%s: qrf6285 init failed = %d\n", __func__, rc);
 			return rc;
 		} else {
 			init_done = true;
 		}
 	}

 	rc = wlan_switch_regulators(on);
 	if (rc) {
 		pr_err("%s: wlan_switch_regulators error = %d\n", __func__, rc);
 		goto out;
 	}

 	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
 	if (machine_is_msm7627a_qrd1()) {
 		rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
 					GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
 					GPIO_CFG_2MA), GPIO_CFG_ENABLE);
 		if (rc) {
 			pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
 				__func__, rc);
 			goto reg_disable;
 		}
 		gpio_set_value(GPIO_WLAN_3V3_EN, 1);
 	}

 	/*
 	 * gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
 	 * EVB1.0 and QRD8625,so the below step is required for those devices.
 	 */
 	if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
 					|| machine_is_msm8625_evb()
 					|| machine_is_msm7627a_qrd3()
 					|| machine_is_msm8625_qrd7()) {
 		rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
 					GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
 					GPIO_CFG_2MA), GPIO_CFG_ENABLE);
 		if (rc) {
 			pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
 				__func__, rc);
 			goto qrd_gpio_fail;
 		}
 		gpio_set_value(gpio_wlan_sys_rest_en, 1);
 	} else {
 		rc = gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
 		if (rc) {
 			pr_err("%s: WLAN sys_rest_en GPIO %d request failed %d\n",
 				__func__,
 				gpio_wlan_sys_rest_en, rc);
 			goto qrd_gpio_fail;
 		}
 		rc = setup_wlan_gpio(on);
 		if (rc) {
 			pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
 			goto gpio_fail;
 		}
 	}

 	/* Enable the A0 clock */
 	rc = setup_wlan_clock(on);
 	if (rc) {
 		pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
 		goto set_gpio_fail;
 	}

 	/* Configure A0 clock to be slave to WLAN_CLK_PWR_REQ */
 	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
 				 PMAPP_CLOCK_VOTE_PIN_CTRL);
 	if (rc) {
 		pr_err("%s: Configuring A0 to Pin controllable failed %d\n",
 				__func__, rc);
 		goto set_clock_fail;
 	}

 	pr_info("WLAN power-up success\n");
 	return 0;
 set_clock_fail:
 	setup_wlan_clock(0);
 set_gpio_fail:
 	setup_wlan_gpio(0);
 gpio_fail:
 	gpio_free(gpio_wlan_sys_rest_en);
 qrd_gpio_fail:
 	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
 	if (machine_is_msm7627a_qrd1())
 		gpio_free(GPIO_WLAN_3V3_EN);
 reg_disable:
 	wlan_switch_regulators(0);
 out:
 	pr_info("WLAN power-up failed\n");
 	return rc;
 }

 static unsigned int msm_AR600X_shutdown_power(bool on)
 {
 	int rc = 0;

 	/* Disable the A0 clock */
 	rc = setup_wlan_clock(on);
 	if (rc) {
 		pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
 		goto set_clock_fail;
 	}

 	/*
 	 * gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
 	 * EVB1.0 and QRD8625,so the below step is required for those devices.
 	 */
 	if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
 					|| machine_is_msm8625_evb()
 					|| machine_is_msm7627a_qrd3()
 					|| machine_is_msm8625_qrd7()) {
 		rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
 					GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
 					GPIO_CFG_2MA), GPIO_CFG_ENABLE);
 		if (rc) {
 			pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
 				__func__, rc);
 			goto gpio_fail;
 		}
 		gpio_set_value(gpio_wlan_sys_rest_en, 0);
 	} else {
 		gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
 		rc = setup_wlan_gpio(on);
 		if (rc) {
 			pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
 			goto set_gpio_fail;
 		}
 		gpio_free(gpio_wlan_sys_rest_en);
 	}

 	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
 	if (machine_is_msm7627a_qrd1()) {
 		rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
 					GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
 					GPIO_CFG_2MA), GPIO_CFG_ENABLE);
 		if (rc) {
 			pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
 				__func__, rc);
 			goto qrd_gpio_fail;
 		}
 		gpio_set_value(GPIO_WLAN_3V3_EN, 0);
 	}

 	rc = wlan_switch_regulators(on);
 	if (rc) {
 		pr_err("%s: wlan_switch_regulators error = %d\n",
 			__func__, rc);
 		goto reg_disable;
 	}

 	pr_info("WLAN power-down success\n");
 	return 0;
 set_clock_fail:
 	setup_wlan_clock(0);
 set_gpio_fail:
 	setup_wlan_gpio(0);
 gpio_fail:
 	gpio_free(gpio_wlan_sys_rest_en);
 qrd_gpio_fail:
 	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
 	if (machine_is_msm7627a_qrd1())
 		gpio_free(GPIO_WLAN_3V3_EN);
 reg_disable:
 	wlan_switch_regulators(0);
 	pr_info("WLAN power-down failed\n");
 	return rc;
 }

 int  ar600x_wlan_power(bool on)
 {
 	if (on)
 		msm_AR600X_setup_power(on);
 	else
 		msm_AR600X_shutdown_power(on);

 	return 0;
 }
	/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/err.h>
	#include <linux/gpio.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/consumer.h>
	#include <asm/mach-types.h>
	#include <mach/rpc_pmapp.h>
	#include "board-msm7627a.h"
	#include "devices-msm7x2xa.h"
	#include "timer.h"

	#define GPIO_WLAN_3V3_EN 119
	static const char *id = "WLAN";

	enum {
	WLAN_VREG_S3 = 0,
	WLAN_VREG_L17,
	WLAN_VREG_L19
	};

	struct wlan_vreg_info {
	const char *vreg_id;
	unsigned int level_min;
	unsigned int level_max;
	unsigned int pmapp_id;
	unsigned int is_vreg_pin_controlled;
	struct regulator *reg;
	};

	static struct wlan_vreg_info vreg_info[] = {
	{"msme1", 1800000, 1800000, 2, 0, NULL},
	{"bt", 3300000, 3300000, 21, 1, NULL},
	{"wlan4", 1800000, 1800000, 23, 1, NULL}
	};

	int gpio_wlan_sys_rest_en = 134;
	static void gpio_wlan_config(void)
	{
	if (machine_is_msm7627a_qrd1() \|\| machine_is_msm7627a_evb()
	\|\| machine_is_msm8625_evb()
	\|\| machine_is_msm7627a_qrd3()
	\|\| machine_is_msm8625_qrd7())
	gpio_wlan_sys_rest_en = 124;
	}

	static unsigned int qrf6285_init_regs(void)
	{
	struct regulator_bulk_data regs[ARRAY_SIZE(vreg_info)];
	int i = 0, rc = 0;

	for (i = 0; i < ARRAY_SIZE(regs); i++) {
	regs[i].supply = vreg_info[i].vreg_id;
	regs[i].min_uV = vreg_info[i].level_min;
	regs[i].max_uV = vreg_info[i].level_max;
	}

	rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs), regs);
	if (rc) {
	pr_err("%s: could not get regulators: %d\n", __func__, rc);
	goto out;
	}

	for (i = 0; i < ARRAY_SIZE(regs); i++)
	vreg_info[i].reg = regs[i].consumer;

	out:
	return rc;
	}

	static unsigned int setup_wlan_gpio(bool on)
	{
	int rc = 0;

	if (on) {
	rc = gpio_direction_output(gpio_wlan_sys_rest_en, 1);
	msleep(100);
	} else {
	gpio_set_value_cansleep(gpio_wlan_sys_rest_en, 0);
	rc = gpio_direction_input(gpio_wlan_sys_rest_en);
	msleep(100);
	}

	if (rc)
	pr_err("%s: WLAN sys_reset_en GPIO: Error", __func__);

	return rc;
	}

	static unsigned int setup_wlan_clock(bool on)
	{
	int rc = 0;

	if (on) {
	/* Vote for A0 clock */
	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
	PMAPP_CLOCK_VOTE_ON);
	} else {
	/* Vote against A0 clock */
	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
	PMAPP_CLOCK_VOTE_OFF);
	}

	if (rc)
	pr_err("%s: Configuring A0 clock for WLAN: Error", __func__);

	return rc;
	}

	static unsigned int wlan_switch_regulators(int on)
	{
	int rc = 0, index = 0;

	if (machine_is_msm7627a_qrd1())
	index = 2;

	for ( ; index < ARRAY_SIZE(vreg_info); index++) {
	if (on) {
	rc = regulator_set_voltage(vreg_info[index].reg,
	vreg_info[index].level_min,
	vreg_info[index].level_max);
	if (rc) {
	pr_err("%s:%s set voltage failed %d\n",
	__func__, vreg_info[index].vreg_id, rc);
	goto reg_disable;
	}

	rc = regulator_enable(vreg_info[index].reg);
	if (rc) {
	pr_err("%s:%s vreg enable failed %d\n",
	__func__, vreg_info[index].vreg_id, rc);
	goto reg_disable;
	}

	if (vreg_info[index].is_vreg_pin_controlled) {
	rc = pmapp_vreg_lpm_pincntrl_vote(id,
	vreg_info[index].pmapp_id,
	PMAPP_CLOCK_ID_A0, 1);
	if (rc) {
	pr_err("%s:%s pincntrl failed %d\n",
	__func__,
	vreg_info[index].vreg_id, rc);
	goto pin_cnt_fail;
	}
	}
	} else {
	if (vreg_info[index].is_vreg_pin_controlled) {
	rc = pmapp_vreg_lpm_pincntrl_vote(id,
	vreg_info[index].pmapp_id,
	PMAPP_CLOCK_ID_A0, 0);
	if (rc) {
	pr_err("%s:%s pincntrl failed %d\n",
	__func__,
	vreg_info[index].vreg_id, rc);
	goto pin_cnt_fail;
	}
	}

	rc = regulator_disable(vreg_info[index].reg);
	if (rc) {
	pr_err("%s:%s vreg disable failed %d\n",
	__func__,
	vreg_info[index].vreg_id, rc);
	goto reg_disable;
	}
	}
	}
	return 0;
	pin_cnt_fail:
	if (on)
	regulator_disable(vreg_info[index].reg);
	reg_disable:
	if (!machine_is_msm7627a_qrd1()) {
	while (index) {
	if (on) {
	index--;
	regulator_disable(vreg_info[index].reg);
	regulator_put(vreg_info[index].reg);
	}
	}
	}
	return rc;
	}

	static unsigned int msm_AR600X_setup_power(bool on)
	{
	int rc = 0;
	static bool init_done;

	if (unlikely(!init_done)) {
	gpio_wlan_config();
	rc = qrf6285_init_regs();
	if (rc) {
	pr_err("%s: qrf6285 init failed = %d\n", __func__, rc);
	return rc;
	} else {
	init_done = true;
	}
	}

	rc = wlan_switch_regulators(on);
	if (rc) {
	pr_err("%s: wlan_switch_regulators error = %d\n", __func__, rc);
	goto out;
	}

	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
	if (machine_is_msm7627a_qrd1()) {
	rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
	GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
	GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc) {
	pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
	__func__, rc);
	goto reg_disable;
	}
	gpio_set_value(GPIO_WLAN_3V3_EN, 1);
	}

	/*
	* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
	* EVB1.0 and QRD8625,so the below step is required for those devices.
	*/
	if (machine_is_msm7627a_qrd1() \|\| machine_is_msm7627a_evb()
	\|\| machine_is_msm8625_evb()
	\|\| machine_is_msm7627a_qrd3()
	\|\| machine_is_msm8625_qrd7()) {
	rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
	GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
	GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc) {
	pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
	__func__, rc);
	goto qrd_gpio_fail;
	}
	gpio_set_value(gpio_wlan_sys_rest_en, 1);
	} else {
	rc = gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
	if (rc) {
	pr_err("%s: WLAN sys_rest_en GPIO %d request failed %d\n",
	__func__,
	gpio_wlan_sys_rest_en, rc);
	goto qrd_gpio_fail;
	}
	rc = setup_wlan_gpio(on);
	if (rc) {
	pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
	goto gpio_fail;
	}
	}

	/* Enable the A0 clock */
	rc = setup_wlan_clock(on);
	if (rc) {
	pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
	goto set_gpio_fail;
	}

	/* Configure A0 clock to be slave to WLAN_CLK_PWR_REQ */
	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
	PMAPP_CLOCK_VOTE_PIN_CTRL);
	if (rc) {
	pr_err("%s: Configuring A0 to Pin controllable failed %d\n",
	__func__, rc);
	goto set_clock_fail;
	}

	pr_info("WLAN power-up success\n");
	return 0;
	set_clock_fail:
	setup_wlan_clock(0);
	set_gpio_fail:
	setup_wlan_gpio(0);
	gpio_fail:
	gpio_free(gpio_wlan_sys_rest_en);
	qrd_gpio_fail:
	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
	if (machine_is_msm7627a_qrd1())
	gpio_free(GPIO_WLAN_3V3_EN);
	reg_disable:
	wlan_switch_regulators(0);
	out:
	pr_info("WLAN power-up failed\n");
	return rc;
	}

	static unsigned int msm_AR600X_shutdown_power(bool on)
	{
	int rc = 0;

	/* Disable the A0 clock */
	rc = setup_wlan_clock(on);
	if (rc) {
	pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
	goto set_clock_fail;
	}

	/*
	* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
	* EVB1.0 and QRD8625,so the below step is required for those devices.
	*/
	if (machine_is_msm7627a_qrd1() \|\| machine_is_msm7627a_evb()
	\|\| machine_is_msm8625_evb()
	\|\| machine_is_msm7627a_qrd3()
	\|\| machine_is_msm8625_qrd7()) {
	rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
	GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
	GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc) {
	pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
	__func__, rc);
	goto gpio_fail;
	}
	gpio_set_value(gpio_wlan_sys_rest_en, 0);
	} else {
	gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
	rc = setup_wlan_gpio(on);
	if (rc) {
	pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
	goto set_gpio_fail;
	}
	gpio_free(gpio_wlan_sys_rest_en);
	}

	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
	if (machine_is_msm7627a_qrd1()) {
	rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
	GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
	GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc) {
	pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
	__func__, rc);
	goto qrd_gpio_fail;
	}
	gpio_set_value(GPIO_WLAN_3V3_EN, 0);
	}

	rc = wlan_switch_regulators(on);
	if (rc) {
	pr_err("%s: wlan_switch_regulators error = %d\n",
	__func__, rc);
	goto reg_disable;
	}

	pr_info("WLAN power-down success\n");
	return 0;
	set_clock_fail:
	setup_wlan_clock(0);
	set_gpio_fail:
	setup_wlan_gpio(0);
	gpio_fail:
	gpio_free(gpio_wlan_sys_rest_en);
	qrd_gpio_fail:
	/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
	if (machine_is_msm7627a_qrd1())
	gpio_free(GPIO_WLAN_3V3_EN);
	reg_disable:
	wlan_switch_regulators(0);
	pr_info("WLAN power-down failed\n");
	return rc;
	}

	int ar600x_wlan_power(bool on)
	{
	if (on)
	msm_AR600X_setup_power(on);
	else
	msm_AR600X_shutdown_power(on);

	return 0;
	}