| /* Changes made by Lineo Inc. May 2001 |
| * |
| * Based on: include/asm-m68knommu/uaccess.h |
| */ |
| |
| #ifndef __BLACKFIN_UACCESS_H |
| #define __BLACKFIN_UACCESS_H |
| |
| /* |
| * User space memory access functions |
| */ |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/string.h> |
| |
| #include <asm/segment.h> |
| #ifdef CONFIG_ACCESS_CHECK |
| # include <asm/bfin-global.h> |
| #endif |
| |
| #define get_ds() (KERNEL_DS) |
| #define get_fs() (current_thread_info()->addr_limit) |
| |
| static inline void set_fs(mm_segment_t fs) |
| { |
| current_thread_info()->addr_limit = fs; |
| } |
| |
| #define segment_eq(a,b) ((a) == (b)) |
| |
| #define VERIFY_READ 0 |
| #define VERIFY_WRITE 1 |
| |
| #define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) |
| |
| static inline int is_in_rom(unsigned long addr) |
| { |
| /* |
| * What we are really trying to do is determine if addr is |
| * in an allocated kernel memory region. If not then assume |
| * we cannot free it or otherwise de-allocate it. Ideally |
| * we could restrict this to really being in a ROM or flash, |
| * but that would need to be done on a board by board basis, |
| * not globally. |
| */ |
| if ((addr < _ramstart) || (addr >= _ramend)) |
| return (1); |
| |
| /* Default case, not in ROM */ |
| return (0); |
| } |
| |
| /* |
| * The fs value determines whether argument validity checking should be |
| * performed or not. If get_fs() == USER_DS, checking is performed, with |
| * get_fs() == KERNEL_DS, checking is bypassed. |
| */ |
| |
| #ifndef CONFIG_ACCESS_CHECK |
| static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } |
| #else |
| #ifdef CONFIG_ACCESS_OK_L1 |
| extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); |
| #else |
| extern int _access_ok(unsigned long addr, unsigned long size); |
| #endif |
| #endif |
| |
| /* |
| * The exception table consists of pairs of addresses: the first is the |
| * address of an instruction that is allowed to fault, and the second is |
| * the address at which the program should continue. No registers are |
| * modified, so it is entirely up to the continuation code to figure out |
| * what to do. |
| * |
| * All the routines below use bits of fixup code that are out of line |
| * with the main instruction path. This means when everything is well, |
| * we don't even have to jump over them. Further, they do not intrude |
| * on our cache or tlb entries. |
| */ |
| |
| struct exception_table_entry { |
| unsigned long insn, fixup; |
| }; |
| |
| /* Returns 0 if exception not found and fixup otherwise. */ |
| extern unsigned long search_exception_table(unsigned long); |
| |
| /* |
| * These are the main single-value transfer routines. They automatically |
| * use the right size if we just have the right pointer type. |
| */ |
| |
| #define put_user(x,p) \ |
| ({ \ |
| int _err = 0; \ |
| typeof(*(p)) _x = (x); \ |
| typeof(*(p)) *_p = (p); \ |
| if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ |
| _err = -EFAULT; \ |
| } \ |
| else { \ |
| switch (sizeof (*(_p))) { \ |
| case 1: \ |
| __put_user_asm(_x, _p, B); \ |
| break; \ |
| case 2: \ |
| __put_user_asm(_x, _p, W); \ |
| break; \ |
| case 4: \ |
| __put_user_asm(_x, _p, ); \ |
| break; \ |
| case 8: { \ |
| long _xl, _xh; \ |
| _xl = ((long *)&_x)[0]; \ |
| _xh = ((long *)&_x)[1]; \ |
| __put_user_asm(_xl, ((long *)_p)+0, ); \ |
| __put_user_asm(_xh, ((long *)_p)+1, ); \ |
| } break; \ |
| default: \ |
| _err = __put_user_bad(); \ |
| break; \ |
| } \ |
| } \ |
| _err; \ |
| }) |
| |
| #define __put_user(x,p) put_user(x,p) |
| static inline int bad_user_access_length(void) |
| { |
| panic("bad_user_access_length"); |
| return -1; |
| } |
| |
| #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ |
| __FILE__, __LINE__, __FUNCTION__),\ |
| bad_user_access_length(), (-EFAULT)) |
| |
| /* |
| * Tell gcc we read from memory instead of writing: this is because |
| * we do not write to any memory gcc knows about, so there are no |
| * aliasing issues. |
| */ |
| |
| #define __ptr(x) ((unsigned long *)(x)) |
| |
| #define __put_user_asm(x,p,bhw) \ |
| __asm__ (#bhw"[%1] = %0;\n\t" \ |
| : /* no outputs */ \ |
| :"d" (x),"a" (__ptr(p)) : "memory") |
| |
| #define get_user(x,p) \ |
| ({ \ |
| int _err = 0; \ |
| typeof(*(p)) *_p = (p); \ |
| if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) { \ |
| _err = -EFAULT; \ |
| } \ |
| else { \ |
| switch (sizeof(*(_p))) { \ |
| case 1: \ |
| __get_user_asm(x, _p, B,(Z)); \ |
| break; \ |
| case 2: \ |
| __get_user_asm(x, _p, W,(Z)); \ |
| break; \ |
| case 4: \ |
| __get_user_asm(x, _p, , ); \ |
| break; \ |
| case 8: { \ |
| unsigned long _xl, _xh; \ |
| __get_user_asm(_xl, ((unsigned long *)_p)+0, , ); \ |
| __get_user_asm(_xh, ((unsigned long *)_p)+1, , ); \ |
| ((unsigned long *)&x)[0] = _xl; \ |
| ((unsigned long *)&x)[1] = _xh; \ |
| } break; \ |
| default: \ |
| x = 0; \ |
| printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ |
| __FILE__, __LINE__, __FUNCTION__); \ |
| _err = __get_user_bad(); \ |
| break; \ |
| } \ |
| } \ |
| _err; \ |
| }) |
| |
| #define __get_user(x,p) get_user(x,p) |
| |
| #define __get_user_bad() (bad_user_access_length(), (-EFAULT)) |
| |
| #define __get_user_asm(x,p,bhw,option) \ |
| { \ |
| unsigned long _tmp; \ |
| __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ |
| : "=d" (_tmp) \ |
| : "a" (__ptr(p))); \ |
| (x) = (__typeof__(*(p))) _tmp; \ |
| } |
| |
| #define __copy_from_user(to, from, n) copy_from_user(to, from, n) |
| #define __copy_to_user(to, from, n) copy_to_user(to, from, n) |
| #define __copy_to_user_inatomic __copy_to_user |
| #define __copy_from_user_inatomic __copy_from_user |
| |
| #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\ |
| return retval; }) |
| |
| #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ |
| return retval; }) |
| |
| static inline long copy_from_user(void *to, |
| const void __user * from, unsigned long n) |
| { |
| if (access_ok(VERIFY_READ, from, n)) |
| memcpy(to, from, n); |
| else |
| return n; |
| return 0; |
| } |
| |
| static inline long copy_to_user(void *to, |
| const void __user * from, unsigned long n) |
| { |
| if (access_ok(VERIFY_WRITE, to, n)) |
| memcpy(to, from, n); |
| else |
| return n; |
| return 0; |
| } |
| |
| /* |
| * Copy a null terminated string from userspace. |
| */ |
| |
| static inline long strncpy_from_user(char *dst, |
| const char *src, long count) |
| { |
| char *tmp; |
| if (!access_ok(VERIFY_READ, src, 1)) |
| return -EFAULT; |
| strncpy(dst, src, count); |
| for (tmp = dst; *tmp && count > 0; tmp++, count--) ; |
| return (tmp - dst); |
| } |
| |
| /* |
| * Return the size of a string (including the ending 0) |
| * |
| * Return 0 on exception, a value greater than N if too long |
| */ |
| static inline long strnlen_user(const char *src, long n) |
| { |
| return (strlen(src) + 1); |
| } |
| |
| #define strlen_user(str) strnlen_user(str, 32767) |
| |
| /* |
| * Zero Userspace |
| */ |
| |
| static inline unsigned long __clear_user(void *to, unsigned long n) |
| { |
| memset(to, 0, n); |
| return 0; |
| } |
| |
| #define clear_user(to, n) __clear_user(to, n) |
| |
| #endif /* _BLACKFIN_UACCESS_H */ |