drivers/misc/pmic8058-misc.c

/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */
/*
 * Qualcomm PMIC8058 Misc Device driver
 *
 */

#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mfd/pmic8058.h>
#include <linux/pmic8058-misc.h>

/* VIB_DRV register */
#define SSBI_REG_ADDR_DRV_VIB		0x4A

#define PM8058_VIB_DRIVE_SHIFT		3
#define PM8058_VIB_LOGIC_SHIFT		2
#define PM8058_VIB_MIN_LEVEL_mV		1200
#define PM8058_VIB_MAX_LEVEL_mV		3100

/* COINCELL_CHG register */
#define SSBI_REG_ADDR_COINCELL_CHG	(0x2F)
#define PM8058_COINCELL_RESISTOR_SHIFT	(2)

/* Resource offsets. */
enum PM8058_MISC_IRQ {
	PM8058_MISC_IRQ_OSC_HALT = 0
};

struct pm8058_misc_device {
	struct pm8058_chip	*pm_chip;
	struct dentry		*dgb_dir;
	unsigned int		osc_halt_irq;
	u64			osc_halt_count;
};

static struct pm8058_misc_device *misc_dev;

int pm8058_vibrator_config(struct pm8058_vib_config *vib_config)
{
	u8 reg = 0;
	int rc;

	if (misc_dev == NULL) {
		pr_info("misc_device is NULL\n");
		return -EINVAL;
	}

	if (vib_config->drive_mV) {
		if (vib_config->drive_mV < PM8058_VIB_MIN_LEVEL_mV ||
			vib_config->drive_mV > PM8058_VIB_MAX_LEVEL_mV) {
			pr_err("Invalid vibrator drive strength\n");
			return -EINVAL;
		}
	}

	reg = (vib_config->drive_mV / 100) << PM8058_VIB_DRIVE_SHIFT;

	reg |= (!!vib_config->active_low) << PM8058_VIB_LOGIC_SHIFT;

	reg |= vib_config->enable_mode;

	rc = pm8058_write(misc_dev->pm_chip, SSBI_REG_ADDR_DRV_VIB, &reg, 1);
	if (rc)
		pr_err("%s: pm8058 write failed: rc=%d\n", __func__, rc);

	return rc;
}
EXPORT_SYMBOL(pm8058_vibrator_config);

/**
 * pm8058_coincell_chg_config - Disables or enables the coincell charger, and
 *				configures its voltage and resistor settings.
 * @chg_config:			Holds both voltage and resistor values, and a
 *				switch to change the state of charger.
 *				If state is to disable the charger then
 *				both voltage and resistor are disregarded.
 *
 * RETURNS: an appropriate -ERRNO error value on error, or zero for success.
 */
int pm8058_coincell_chg_config(struct pm8058_coincell_chg_config *chg_config)
{
	u8 reg, voltage, resistor;
	int rc;

	reg = 0;
	voltage = 0;
	resistor = 0;
	rc = 0;

	if (misc_dev == NULL) {
		pr_err("misc_device is NULL\n");
		return -EINVAL;
	}

	if (chg_config == NULL) {
		pr_err("chg_config is NULL\n");
		return -EINVAL;
	}

	if (chg_config->state == PM8058_COINCELL_CHG_DISABLE) {
		rc = pm8058_write(misc_dev->pm_chip,
				SSBI_REG_ADDR_COINCELL_CHG, &reg, 1);
		if (rc)
			pr_err("%s: pm8058 write failed: rc=%d\n",
							__func__, rc);
		return rc;
	}

	voltage = chg_config->voltage;
	resistor = chg_config->resistor;

	if (voltage < PM8058_COINCELL_VOLTAGE_3p2V ||
			(voltage > PM8058_COINCELL_VOLTAGE_3p0V &&
				voltage != PM8058_COINCELL_VOLTAGE_2p5V)) {
		pr_err("Invalid voltage value provided\n");
		return -EINVAL;
	}

	if (resistor < PM8058_COINCELL_RESISTOR_2100_OHMS ||
			resistor > PM8058_COINCELL_RESISTOR_800_OHMS) {
		pr_err("Invalid resistor value provided\n");
		return -EINVAL;
	}

	reg |= voltage;

	reg |= (resistor << PM8058_COINCELL_RESISTOR_SHIFT);

	rc = pm8058_write(misc_dev->pm_chip,
			SSBI_REG_ADDR_COINCELL_CHG, &reg, 1);

	if (rc)
		pr_err("%s: pm8058 write failed: rc=%d\n", __func__, rc);

	return rc;
}
EXPORT_SYMBOL(pm8058_coincell_chg_config);

/* Handle the OSC_HALT interrupt: 32 kHz XTAL oscillator has stopped. */
static irqreturn_t pm8058_osc_halt_isr(int irq, void *data)
{
	struct pm8058_misc_device *miscdev = data;
	u64 count = 0;

	if (miscdev) {
		miscdev->osc_halt_count++;
		count = miscdev->osc_halt_count;
	}

	pr_crit("%s: OSC_HALT interrupt has triggered, 32 kHz XTAL oscillator"
		" has halted (%llu)!\n", __func__, count);

	return IRQ_HANDLED;
}

#if defined(CONFIG_DEBUG_FS)

static int osc_halt_count_get(void *data, u64 *val)
{
	struct pm8058_misc_device *miscdev = data;

	if (miscdev == NULL) {
		pr_err("%s: null pointer input.\n", __func__);
		return -EINVAL;
	}

	*val = miscdev->osc_halt_count;

	return 0;
}

DEFINE_SIMPLE_ATTRIBUTE(dbg_osc_halt_fops, osc_halt_count_get, NULL, "%llu\n");

static int __devinit pmic8058_misc_dbg_probe(struct pm8058_misc_device *miscdev)
{
	struct dentry *dent;
	struct dentry *temp;

	if (miscdev == NULL) {
		pr_err("%s: no parent data passed in.\n", __func__);
		return -EINVAL;
	}

	dent = debugfs_create_dir("pm8058-misc", NULL);
	if (dent == NULL || IS_ERR(dent)) {
		pr_err("%s: ERR debugfs_create_dir: dent=0x%X\n",
					__func__, (unsigned)dent);
		return -ENOMEM;
	}

	temp = debugfs_create_file("osc_halt_count", S_IRUSR, dent,
					miscdev, &dbg_osc_halt_fops);
	if (temp == NULL || IS_ERR(temp)) {
		pr_err("%s: ERR debugfs_create_file: dent=0x%X\n",
					__func__, (unsigned)temp);
		goto debug_error;
	}

	miscdev->dgb_dir = dent;
	return 0;

debug_error:
	debugfs_remove_recursive(dent);
	return -ENOMEM;
}

static int __devexit pmic8058_misc_dbg_remove(
		struct pm8058_misc_device *miscdev)
{
	if (miscdev->dgb_dir)
		debugfs_remove_recursive(miscdev->dgb_dir);

	return 0;
}

#else

static int __devinit pmic8058_misc_dbg_probe(struct pm8058_misc_device *miscdev)
{
	return 0;
}

static int __devexit pmic8058_misc_dbg_remove(
		struct pm8058_misc_device *miscdev)
{
	return 0;
}

#endif


static int __devinit pmic8058_misc_probe(struct platform_device *pdev)
{
	struct pm8058_misc_device *miscdev;
	struct pm8058_chip *pm_chip;
	unsigned int irq;
	int rc;

	pm_chip = dev_get_drvdata(pdev->dev.parent);
	if (pm_chip == NULL) {
		pr_err("%s: no driver data passed in.\n", __func__);
		return -EFAULT;
	}

	irq = platform_get_irq(pdev, PM8058_MISC_IRQ_OSC_HALT);
	if (!irq) {
		pr_err("%s: no IRQ passed in.\n", __func__);
		return -EFAULT;
	}

	miscdev = kzalloc(sizeof *miscdev, GFP_KERNEL);
	if (miscdev == NULL) {
		pr_err("%s: kzalloc() failed.\n", __func__);
		return -ENOMEM;
	}

	miscdev->pm_chip = pm_chip;
	platform_set_drvdata(pdev, miscdev);

	rc = request_threaded_irq(irq, NULL, pm8058_osc_halt_isr,
			 IRQF_TRIGGER_RISING | IRQF_DISABLED,
			 "pm8058-osc_halt-irq", miscdev);
	if (rc < 0) {
		pr_err("%s: request_irq(%d) FAIL: %d\n", __func__, irq, rc);
		platform_set_drvdata(pdev, miscdev->pm_chip);
		kfree(miscdev);
		return rc;
	}
	miscdev->osc_halt_irq = irq;
	miscdev->osc_halt_count = 0;

	rc = pmic8058_misc_dbg_probe(miscdev);
	if (rc)
		return rc;

	misc_dev = miscdev;

	pr_notice("%s: OK\n", __func__);
	return 0;
}

static int __devexit pmic8058_misc_remove(struct platform_device *pdev)
{
	struct pm8058_misc_device *miscdev = platform_get_drvdata(pdev);

	pmic8058_misc_dbg_remove(miscdev);

	platform_set_drvdata(pdev, miscdev->pm_chip);
	free_irq(miscdev->osc_halt_irq, miscdev);
	kfree(miscdev);

	return 0;
}

static struct platform_driver pmic8058_misc_driver = {
	.probe	= pmic8058_misc_probe,
	.remove	= __devexit_p(pmic8058_misc_remove),
	.driver	= {
		.name = "pm8058-misc",
		.owner = THIS_MODULE,
	},
};

static int __init pm8058_misc_init(void)
{
	return platform_driver_register(&pmic8058_misc_driver);
}

static void __exit pm8058_misc_exit(void)
{
	platform_driver_unregister(&pmic8058_misc_driver);
}

module_init(pm8058_misc_init);
module_exit(pm8058_misc_exit);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PMIC8058 Misc Device driver");
MODULE_VERSION("1.0");
MODULE_ALIAS("platform:pmic8058-misc");