| Ken Zhang | 57df28c | 2013-01-24 17:02:35 -0500 | [diff] [blame] | 1 | Qualcomm mdss-qpic-panel |
| 2 | |
| 3 | mdss-qpic-panel is a panel device which can be driven by qpic. |
| 4 | |
| 5 | Required properties: |
| 6 | - compatible: Must be "qcom,mdss-qpic-panel" |
| 7 | - qcom,mdss-pan-res: A two dimensional array that specifies the panel |
| 8 | resolution. |
| 9 | - qcom,mdss-pan-bpp: Specifies the panel bits per pixel. |
| 10 | - qcom,refresh_rate: Panel refresh rate |
| 11 | - vdd-supply: Phandle for vdd regulator device node. |
| 12 | - avdd-supply: Phandle for avdd regulator device node. |
| 13 | - qcom,cs-gpio: Phandle for cs gpio device node. |
| 14 | - qcom,te-gpio: Phandle for te gpio device node. |
| 15 | - qcom,rst-gpio: Phandle for rst gpio device node. |
| 16 | - qcom,ad8-gpio: Phandle for ad8 gpio device node. |
| 17 | |
| 18 | Optional properties: |
| 19 | - label: A string used as a descriptive name of the panel |
| 20 | |
| 21 | |
| 22 | Example: |
| 23 | / { |
| 24 | qcom,mdss_lcdc_ili9341_qvga { |
| 25 | compatible = "qcom,mdss-qpic-panel"; |
| 26 | label = "ili qvga lcdc panel"; |
| 27 | vdd-supply = <&pm8019_l11>; |
| 28 | avdd-supply = <&pm8019_l14>; |
| 29 | qcom,cs-gpio = <&msmgpio 21 0>; |
| 30 | qcom,te-gpio = <&msmgpio 22 0>; |
| 31 | qcom,rst-gpio = <&msmgpio 23 0>; |
| 32 | qcom,ad8-gpio = <&msmgpio 20 0>; |
| 33 | qcom,mdss-pan-res = <240 320>; |
| 34 | qcom,mdss-pan-bpp = <18>; |
| 35 | qcom,refresh_rate = <60>; |
| 36 | }; |
| 37 | }; |