Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify it |
| 5 | * under the terms and conditions of the GNU General Public License, |
| 6 | * version 2, as published by the Free Software Foundation. |
| 7 | * |
| 8 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 9 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 10 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 11 | * more details. |
| 12 | * |
| 13 | * You should have received a copy of the GNU General Public License along with |
| 14 | * this program; if not, write to the Free Software Foundation, Inc., |
| 15 | * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| 16 | * |
| 17 | * Maintained at www.Open-FCoE.org |
| 18 | */ |
| 19 | |
| 20 | /* |
| 21 | * RPORT GENERAL INFO |
| 22 | * |
| 23 | * This file contains all processing regarding fc_rports. It contains the |
| 24 | * rport state machine and does all rport interaction with the transport class. |
| 25 | * There should be no other places in libfc that interact directly with the |
| 26 | * transport class in regards to adding and deleting rports. |
| 27 | * |
| 28 | * fc_rport's represent N_Port's within the fabric. |
| 29 | */ |
| 30 | |
| 31 | /* |
| 32 | * RPORT LOCKING |
| 33 | * |
| 34 | * The rport should never hold the rport mutex and then attempt to acquire |
| 35 | * either the lport or disc mutexes. The rport's mutex is considered lesser |
| 36 | * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for |
| 37 | * more comments on the heirarchy. |
| 38 | * |
| 39 | * The locking strategy is similar to the lport's strategy. The lock protects |
| 40 | * the rport's states and is held and released by the entry points to the rport |
| 41 | * block. All _enter_* functions correspond to rport states and expect the rport |
| 42 | * mutex to be locked before calling them. This means that rports only handle |
| 43 | * one request or response at a time, since they're not critical for the I/O |
| 44 | * path this potential over-use of the mutex is acceptable. |
| 45 | */ |
| 46 | |
| 47 | #include <linux/kernel.h> |
| 48 | #include <linux/spinlock.h> |
| 49 | #include <linux/interrupt.h> |
| 50 | #include <linux/rcupdate.h> |
| 51 | #include <linux/timer.h> |
| 52 | #include <linux/workqueue.h> |
| 53 | #include <asm/unaligned.h> |
| 54 | |
| 55 | #include <scsi/libfc.h> |
| 56 | #include <scsi/fc_encode.h> |
| 57 | |
| 58 | static int fc_rport_debug; |
| 59 | |
| 60 | #define FC_DEBUG_RPORT(fmt...) \ |
| 61 | do { \ |
| 62 | if (fc_rport_debug) \ |
| 63 | FC_DBG(fmt); \ |
| 64 | } while (0) |
| 65 | |
| 66 | struct workqueue_struct *rport_event_queue; |
| 67 | |
| 68 | static void fc_rport_enter_plogi(struct fc_rport *); |
| 69 | static void fc_rport_enter_prli(struct fc_rport *); |
| 70 | static void fc_rport_enter_rtv(struct fc_rport *); |
| 71 | static void fc_rport_enter_ready(struct fc_rport *); |
| 72 | static void fc_rport_enter_logo(struct fc_rport *); |
| 73 | |
| 74 | static void fc_rport_recv_plogi_req(struct fc_rport *, |
| 75 | struct fc_seq *, struct fc_frame *); |
| 76 | static void fc_rport_recv_prli_req(struct fc_rport *, |
| 77 | struct fc_seq *, struct fc_frame *); |
| 78 | static void fc_rport_recv_prlo_req(struct fc_rport *, |
| 79 | struct fc_seq *, struct fc_frame *); |
| 80 | static void fc_rport_recv_logo_req(struct fc_rport *, |
| 81 | struct fc_seq *, struct fc_frame *); |
| 82 | static void fc_rport_timeout(struct work_struct *); |
| 83 | static void fc_rport_error(struct fc_rport *, struct fc_frame *); |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 84 | static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 85 | static void fc_rport_work(struct work_struct *); |
| 86 | |
| 87 | static const char *fc_rport_state_names[] = { |
| 88 | [RPORT_ST_NONE] = "None", |
| 89 | [RPORT_ST_INIT] = "Init", |
| 90 | [RPORT_ST_PLOGI] = "PLOGI", |
| 91 | [RPORT_ST_PRLI] = "PRLI", |
| 92 | [RPORT_ST_RTV] = "RTV", |
| 93 | [RPORT_ST_READY] = "Ready", |
| 94 | [RPORT_ST_LOGO] = "LOGO", |
| 95 | }; |
| 96 | |
| 97 | static void fc_rport_rogue_destroy(struct device *dev) |
| 98 | { |
| 99 | struct fc_rport *rport = dev_to_rport(dev); |
| 100 | FC_DEBUG_RPORT("Destroying rogue rport (%6x)\n", rport->port_id); |
| 101 | kfree(rport); |
| 102 | } |
| 103 | |
| 104 | struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp) |
| 105 | { |
| 106 | struct fc_rport *rport; |
| 107 | struct fc_rport_libfc_priv *rdata; |
| 108 | rport = kzalloc(sizeof(*rport) + sizeof(*rdata), GFP_KERNEL); |
| 109 | |
| 110 | if (!rport) |
| 111 | return NULL; |
| 112 | |
| 113 | rdata = RPORT_TO_PRIV(rport); |
| 114 | |
| 115 | rport->dd_data = rdata; |
| 116 | rport->port_id = dp->ids.port_id; |
| 117 | rport->port_name = dp->ids.port_name; |
| 118 | rport->node_name = dp->ids.node_name; |
| 119 | rport->roles = dp->ids.roles; |
| 120 | rport->maxframe_size = FC_MIN_MAX_PAYLOAD; |
| 121 | /* |
| 122 | * Note: all this libfc rogue rport code will be removed for |
| 123 | * upstream so it fine that this is really ugly and hacky right now. |
| 124 | */ |
| 125 | device_initialize(&rport->dev); |
| 126 | rport->dev.release = fc_rport_rogue_destroy; |
| 127 | |
| 128 | mutex_init(&rdata->rp_mutex); |
| 129 | rdata->local_port = dp->lp; |
| 130 | rdata->trans_state = FC_PORTSTATE_ROGUE; |
| 131 | rdata->rp_state = RPORT_ST_INIT; |
| 132 | rdata->event = RPORT_EV_NONE; |
| 133 | rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; |
| 134 | rdata->ops = NULL; |
| 135 | rdata->e_d_tov = dp->lp->e_d_tov; |
| 136 | rdata->r_a_tov = dp->lp->r_a_tov; |
| 137 | INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout); |
| 138 | INIT_WORK(&rdata->event_work, fc_rport_work); |
| 139 | /* |
| 140 | * For good measure, but not necessary as we should only |
| 141 | * add REAL rport to the lport list. |
| 142 | */ |
| 143 | INIT_LIST_HEAD(&rdata->peers); |
| 144 | |
| 145 | return rport; |
| 146 | } |
| 147 | |
| 148 | /** |
| 149 | * fc_rport_state - return a string for the state the rport is in |
| 150 | * @rport: The rport whose state we want to get a string for |
| 151 | */ |
| 152 | static const char *fc_rport_state(struct fc_rport *rport) |
| 153 | { |
| 154 | const char *cp; |
| 155 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 156 | |
| 157 | cp = fc_rport_state_names[rdata->rp_state]; |
| 158 | if (!cp) |
| 159 | cp = "Unknown"; |
| 160 | return cp; |
| 161 | } |
| 162 | |
| 163 | /** |
| 164 | * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds. |
| 165 | * @rport: Pointer to Fibre Channel remote port structure |
| 166 | * @timeout: timeout in seconds |
| 167 | */ |
| 168 | void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) |
| 169 | { |
| 170 | if (timeout) |
| 171 | rport->dev_loss_tmo = timeout + 5; |
| 172 | else |
| 173 | rport->dev_loss_tmo = 30; |
| 174 | } |
| 175 | EXPORT_SYMBOL(fc_set_rport_loss_tmo); |
| 176 | |
| 177 | /** |
| 178 | * fc_plogi_get_maxframe - Get max payload from the common service parameters |
| 179 | * @flp: FLOGI payload structure |
| 180 | * @maxval: upper limit, may be less than what is in the service parameters |
| 181 | */ |
| 182 | static unsigned int |
| 183 | fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) |
| 184 | { |
| 185 | unsigned int mfs; |
| 186 | |
| 187 | /* |
| 188 | * Get max payload from the common service parameters and the |
| 189 | * class 3 receive data field size. |
| 190 | */ |
| 191 | mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; |
| 192 | if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) |
| 193 | maxval = mfs; |
| 194 | mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs); |
| 195 | if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) |
| 196 | maxval = mfs; |
| 197 | return maxval; |
| 198 | } |
| 199 | |
| 200 | /** |
| 201 | * fc_rport_state_enter - Change the rport's state |
| 202 | * @rport: The rport whose state should change |
| 203 | * @new: The new state of the rport |
| 204 | * |
| 205 | * Locking Note: Called with the rport lock held |
| 206 | */ |
| 207 | static void fc_rport_state_enter(struct fc_rport *rport, |
| 208 | enum fc_rport_state new) |
| 209 | { |
| 210 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 211 | if (rdata->rp_state != new) |
| 212 | rdata->retries = 0; |
| 213 | rdata->rp_state = new; |
| 214 | } |
| 215 | |
| 216 | static void fc_rport_work(struct work_struct *work) |
| 217 | { |
Abhijeet Joglekar | 571f824 | 2009-02-27 10:54:41 -0800 | [diff] [blame] | 218 | u32 port_id; |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 219 | struct fc_rport_libfc_priv *rdata = |
| 220 | container_of(work, struct fc_rport_libfc_priv, event_work); |
| 221 | enum fc_rport_event event; |
| 222 | enum fc_rport_trans_state trans_state; |
| 223 | struct fc_lport *lport = rdata->local_port; |
| 224 | struct fc_rport_operations *rport_ops; |
| 225 | struct fc_rport *rport = PRIV_TO_RPORT(rdata); |
| 226 | |
| 227 | mutex_lock(&rdata->rp_mutex); |
| 228 | event = rdata->event; |
| 229 | rport_ops = rdata->ops; |
| 230 | |
| 231 | if (event == RPORT_EV_CREATED) { |
| 232 | struct fc_rport *new_rport; |
| 233 | struct fc_rport_libfc_priv *new_rdata; |
| 234 | struct fc_rport_identifiers ids; |
| 235 | |
| 236 | ids.port_id = rport->port_id; |
| 237 | ids.roles = rport->roles; |
| 238 | ids.port_name = rport->port_name; |
| 239 | ids.node_name = rport->node_name; |
| 240 | |
| 241 | mutex_unlock(&rdata->rp_mutex); |
| 242 | |
| 243 | new_rport = fc_remote_port_add(lport->host, 0, &ids); |
| 244 | if (new_rport) { |
| 245 | /* |
| 246 | * Switch from the rogue rport to the rport |
| 247 | * returned by the FC class. |
| 248 | */ |
| 249 | new_rport->maxframe_size = rport->maxframe_size; |
| 250 | |
| 251 | new_rdata = new_rport->dd_data; |
| 252 | new_rdata->e_d_tov = rdata->e_d_tov; |
| 253 | new_rdata->r_a_tov = rdata->r_a_tov; |
| 254 | new_rdata->ops = rdata->ops; |
| 255 | new_rdata->local_port = rdata->local_port; |
| 256 | new_rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; |
| 257 | new_rdata->trans_state = FC_PORTSTATE_REAL; |
| 258 | mutex_init(&new_rdata->rp_mutex); |
| 259 | INIT_DELAYED_WORK(&new_rdata->retry_work, |
| 260 | fc_rport_timeout); |
| 261 | INIT_LIST_HEAD(&new_rdata->peers); |
| 262 | INIT_WORK(&new_rdata->event_work, fc_rport_work); |
| 263 | |
| 264 | fc_rport_state_enter(new_rport, RPORT_ST_READY); |
| 265 | } else { |
| 266 | FC_DBG("Failed to create the rport for port " |
| 267 | "(%6x).\n", ids.port_id); |
| 268 | event = RPORT_EV_FAILED; |
| 269 | } |
| 270 | put_device(&rport->dev); |
| 271 | rport = new_rport; |
| 272 | rdata = new_rport->dd_data; |
| 273 | if (rport_ops->event_callback) |
| 274 | rport_ops->event_callback(lport, rport, event); |
| 275 | } else if ((event == RPORT_EV_FAILED) || |
| 276 | (event == RPORT_EV_LOGO) || |
| 277 | (event == RPORT_EV_STOP)) { |
| 278 | trans_state = rdata->trans_state; |
| 279 | mutex_unlock(&rdata->rp_mutex); |
| 280 | if (rport_ops->event_callback) |
| 281 | rport_ops->event_callback(lport, rport, event); |
| 282 | if (trans_state == FC_PORTSTATE_ROGUE) |
| 283 | put_device(&rport->dev); |
Abhijeet Joglekar | 571f824 | 2009-02-27 10:54:41 -0800 | [diff] [blame] | 284 | else { |
| 285 | port_id = rport->port_id; |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 286 | fc_remote_port_delete(rport); |
Abhijeet Joglekar | 571f824 | 2009-02-27 10:54:41 -0800 | [diff] [blame] | 287 | lport->tt.exch_mgr_reset(lport, 0, port_id); |
| 288 | lport->tt.exch_mgr_reset(lport, port_id, 0); |
| 289 | } |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 290 | } else |
| 291 | mutex_unlock(&rdata->rp_mutex); |
| 292 | } |
| 293 | |
| 294 | /** |
| 295 | * fc_rport_login - Start the remote port login state machine |
| 296 | * @rport: Fibre Channel remote port |
| 297 | * |
| 298 | * Locking Note: Called without the rport lock held. This |
| 299 | * function will hold the rport lock, call an _enter_* |
| 300 | * function and then unlock the rport. |
| 301 | */ |
| 302 | int fc_rport_login(struct fc_rport *rport) |
| 303 | { |
| 304 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 305 | |
| 306 | mutex_lock(&rdata->rp_mutex); |
| 307 | |
| 308 | FC_DEBUG_RPORT("Login to port (%6x)\n", rport->port_id); |
| 309 | |
| 310 | fc_rport_enter_plogi(rport); |
| 311 | |
| 312 | mutex_unlock(&rdata->rp_mutex); |
| 313 | |
| 314 | return 0; |
| 315 | } |
| 316 | |
| 317 | /** |
| 318 | * fc_rport_logoff - Logoff and remove an rport |
| 319 | * @rport: Fibre Channel remote port to be removed |
| 320 | * |
| 321 | * Locking Note: Called without the rport lock held. This |
| 322 | * function will hold the rport lock, call an _enter_* |
| 323 | * function and then unlock the rport. |
| 324 | */ |
| 325 | int fc_rport_logoff(struct fc_rport *rport) |
| 326 | { |
| 327 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 328 | |
| 329 | mutex_lock(&rdata->rp_mutex); |
| 330 | |
| 331 | FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); |
| 332 | |
| 333 | fc_rport_enter_logo(rport); |
| 334 | |
| 335 | /* |
| 336 | * Change the state to NONE so that we discard |
| 337 | * the response. |
| 338 | */ |
| 339 | fc_rport_state_enter(rport, RPORT_ST_NONE); |
| 340 | |
| 341 | mutex_unlock(&rdata->rp_mutex); |
| 342 | |
| 343 | cancel_delayed_work_sync(&rdata->retry_work); |
| 344 | |
| 345 | mutex_lock(&rdata->rp_mutex); |
| 346 | |
| 347 | rdata->event = RPORT_EV_STOP; |
| 348 | queue_work(rport_event_queue, &rdata->event_work); |
| 349 | |
| 350 | mutex_unlock(&rdata->rp_mutex); |
| 351 | |
| 352 | return 0; |
| 353 | } |
| 354 | |
| 355 | /** |
| 356 | * fc_rport_enter_ready - The rport is ready |
| 357 | * @rport: Fibre Channel remote port that is ready |
| 358 | * |
| 359 | * Locking Note: The rport lock is expected to be held before calling |
| 360 | * this routine. |
| 361 | */ |
| 362 | static void fc_rport_enter_ready(struct fc_rport *rport) |
| 363 | { |
| 364 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 365 | |
| 366 | fc_rport_state_enter(rport, RPORT_ST_READY); |
| 367 | |
| 368 | FC_DEBUG_RPORT("Port (%6x) is Ready\n", rport->port_id); |
| 369 | |
| 370 | rdata->event = RPORT_EV_CREATED; |
| 371 | queue_work(rport_event_queue, &rdata->event_work); |
| 372 | } |
| 373 | |
| 374 | /** |
| 375 | * fc_rport_timeout - Handler for the retry_work timer. |
| 376 | * @work: The work struct of the fc_rport_libfc_priv |
| 377 | * |
| 378 | * Locking Note: Called without the rport lock held. This |
| 379 | * function will hold the rport lock, call an _enter_* |
| 380 | * function and then unlock the rport. |
| 381 | */ |
| 382 | static void fc_rport_timeout(struct work_struct *work) |
| 383 | { |
| 384 | struct fc_rport_libfc_priv *rdata = |
| 385 | container_of(work, struct fc_rport_libfc_priv, retry_work.work); |
| 386 | struct fc_rport *rport = PRIV_TO_RPORT(rdata); |
| 387 | |
| 388 | mutex_lock(&rdata->rp_mutex); |
| 389 | |
| 390 | switch (rdata->rp_state) { |
| 391 | case RPORT_ST_PLOGI: |
| 392 | fc_rport_enter_plogi(rport); |
| 393 | break; |
| 394 | case RPORT_ST_PRLI: |
| 395 | fc_rport_enter_prli(rport); |
| 396 | break; |
| 397 | case RPORT_ST_RTV: |
| 398 | fc_rport_enter_rtv(rport); |
| 399 | break; |
| 400 | case RPORT_ST_LOGO: |
| 401 | fc_rport_enter_logo(rport); |
| 402 | break; |
| 403 | case RPORT_ST_READY: |
| 404 | case RPORT_ST_INIT: |
| 405 | case RPORT_ST_NONE: |
| 406 | break; |
| 407 | } |
| 408 | |
| 409 | mutex_unlock(&rdata->rp_mutex); |
| 410 | put_device(&rport->dev); |
| 411 | } |
| 412 | |
| 413 | /** |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 414 | * fc_rport_error - Error handler, called once retries have been exhausted |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 415 | * @rport: The fc_rport object |
| 416 | * @fp: The frame pointer |
| 417 | * |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 418 | * Locking Note: The rport lock is expected to be held before |
| 419 | * calling this routine |
| 420 | */ |
| 421 | static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) |
| 422 | { |
| 423 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 424 | |
| 425 | FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", |
| 426 | PTR_ERR(fp), fc_rport_state(rport), rdata->retries); |
| 427 | |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 428 | switch (rdata->rp_state) { |
| 429 | case RPORT_ST_PLOGI: |
| 430 | case RPORT_ST_PRLI: |
| 431 | case RPORT_ST_LOGO: |
| 432 | rdata->event = RPORT_EV_FAILED; |
| 433 | queue_work(rport_event_queue, |
| 434 | &rdata->event_work); |
| 435 | break; |
| 436 | case RPORT_ST_RTV: |
| 437 | fc_rport_enter_ready(rport); |
| 438 | break; |
| 439 | case RPORT_ST_NONE: |
| 440 | case RPORT_ST_READY: |
| 441 | case RPORT_ST_INIT: |
| 442 | break; |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 443 | } |
| 444 | } |
| 445 | |
| 446 | /** |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 447 | * fc_rport_error_retry - Error handler when retries are desired |
| 448 | * @rport: The fc_rport object |
| 449 | * @fp: The frame pointer |
| 450 | * |
| 451 | * If the error was an exchange timeout retry immediately, |
| 452 | * otherwise wait for E_D_TOV. |
| 453 | * |
| 454 | * Locking Note: The rport lock is expected to be held before |
| 455 | * calling this routine |
| 456 | */ |
| 457 | static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) |
| 458 | { |
| 459 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 460 | unsigned long delay = FC_DEF_E_D_TOV; |
| 461 | |
| 462 | /* make sure this isn't an FC_EX_CLOSED error, never retry those */ |
| 463 | if (PTR_ERR(fp) == -FC_EX_CLOSED) |
| 464 | return fc_rport_error(rport, fp); |
| 465 | |
| 466 | if (rdata->retries < rdata->local_port->max_retry_count) { |
| 467 | FC_DEBUG_RPORT("Error %ld in state %s, retrying\n", |
| 468 | PTR_ERR(fp), fc_rport_state(rport)); |
| 469 | rdata->retries++; |
| 470 | /* no additional delay on exchange timeouts */ |
| 471 | if (PTR_ERR(fp) == -FC_EX_TIMEOUT) |
| 472 | delay = 0; |
| 473 | get_device(&rport->dev); |
| 474 | schedule_delayed_work(&rdata->retry_work, delay); |
| 475 | return; |
| 476 | } |
| 477 | |
| 478 | return fc_rport_error(rport, fp); |
| 479 | } |
| 480 | |
| 481 | /** |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 482 | * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response |
| 483 | * @sp: current sequence in the PLOGI exchange |
| 484 | * @fp: response frame |
| 485 | * @rp_arg: Fibre Channel remote port |
| 486 | * |
| 487 | * Locking Note: This function will be called without the rport lock |
| 488 | * held, but it will lock, call an _enter_* function or fc_rport_error |
| 489 | * and then unlock the rport. |
| 490 | */ |
| 491 | static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, |
| 492 | void *rp_arg) |
| 493 | { |
| 494 | struct fc_rport *rport = rp_arg; |
| 495 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 496 | struct fc_lport *lport = rdata->local_port; |
| 497 | struct fc_els_flogi *plp; |
| 498 | unsigned int tov; |
| 499 | u16 csp_seq; |
| 500 | u16 cssp_seq; |
| 501 | u8 op; |
| 502 | |
| 503 | mutex_lock(&rdata->rp_mutex); |
| 504 | |
| 505 | FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", |
| 506 | rport->port_id); |
| 507 | |
| 508 | if (rdata->rp_state != RPORT_ST_PLOGI) { |
| 509 | FC_DBG("Received a PLOGI response, but in state %s\n", |
| 510 | fc_rport_state(rport)); |
| 511 | goto out; |
| 512 | } |
| 513 | |
| 514 | if (IS_ERR(fp)) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 515 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 516 | goto err; |
| 517 | } |
| 518 | |
| 519 | op = fc_frame_payload_op(fp); |
| 520 | if (op == ELS_LS_ACC && |
| 521 | (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { |
| 522 | rport->port_name = get_unaligned_be64(&plp->fl_wwpn); |
| 523 | rport->node_name = get_unaligned_be64(&plp->fl_wwnn); |
| 524 | |
| 525 | tov = ntohl(plp->fl_csp.sp_e_d_tov); |
| 526 | if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) |
| 527 | tov /= 1000; |
| 528 | if (tov > rdata->e_d_tov) |
| 529 | rdata->e_d_tov = tov; |
| 530 | csp_seq = ntohs(plp->fl_csp.sp_tot_seq); |
| 531 | cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq); |
| 532 | if (cssp_seq < csp_seq) |
| 533 | csp_seq = cssp_seq; |
| 534 | rdata->max_seq = csp_seq; |
| 535 | rport->maxframe_size = |
| 536 | fc_plogi_get_maxframe(plp, lport->mfs); |
| 537 | |
| 538 | /* |
| 539 | * If the rport is one of the well known addresses |
| 540 | * we skip PRLI and RTV and go straight to READY. |
| 541 | */ |
| 542 | if (rport->port_id >= FC_FID_DOM_MGR) |
| 543 | fc_rport_enter_ready(rport); |
| 544 | else |
| 545 | fc_rport_enter_prli(rport); |
| 546 | } else |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 547 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 548 | |
| 549 | out: |
| 550 | fc_frame_free(fp); |
| 551 | err: |
| 552 | mutex_unlock(&rdata->rp_mutex); |
| 553 | put_device(&rport->dev); |
| 554 | } |
| 555 | |
| 556 | /** |
| 557 | * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer |
| 558 | * @rport: Fibre Channel remote port to send PLOGI to |
| 559 | * |
| 560 | * Locking Note: The rport lock is expected to be held before calling |
| 561 | * this routine. |
| 562 | */ |
| 563 | static void fc_rport_enter_plogi(struct fc_rport *rport) |
| 564 | { |
| 565 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 566 | struct fc_lport *lport = rdata->local_port; |
| 567 | struct fc_frame *fp; |
| 568 | |
| 569 | FC_DEBUG_RPORT("Port (%6x) entered PLOGI state from %s state\n", |
| 570 | rport->port_id, fc_rport_state(rport)); |
| 571 | |
| 572 | fc_rport_state_enter(rport, RPORT_ST_PLOGI); |
| 573 | |
| 574 | rport->maxframe_size = FC_MIN_MAX_PAYLOAD; |
| 575 | fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); |
| 576 | if (!fp) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 577 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 578 | return; |
| 579 | } |
| 580 | rdata->e_d_tov = lport->e_d_tov; |
| 581 | |
| 582 | if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, |
| 583 | fc_rport_plogi_resp, rport, lport->e_d_tov)) |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 584 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 585 | else |
| 586 | get_device(&rport->dev); |
| 587 | } |
| 588 | |
| 589 | /** |
| 590 | * fc_rport_prli_resp - Process Login (PRLI) response handler |
| 591 | * @sp: current sequence in the PRLI exchange |
| 592 | * @fp: response frame |
| 593 | * @rp_arg: Fibre Channel remote port |
| 594 | * |
| 595 | * Locking Note: This function will be called without the rport lock |
| 596 | * held, but it will lock, call an _enter_* function or fc_rport_error |
| 597 | * and then unlock the rport. |
| 598 | */ |
| 599 | static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, |
| 600 | void *rp_arg) |
| 601 | { |
| 602 | struct fc_rport *rport = rp_arg; |
| 603 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 604 | struct { |
| 605 | struct fc_els_prli prli; |
| 606 | struct fc_els_spp spp; |
| 607 | } *pp; |
| 608 | u32 roles = FC_RPORT_ROLE_UNKNOWN; |
| 609 | u32 fcp_parm = 0; |
| 610 | u8 op; |
| 611 | |
| 612 | mutex_lock(&rdata->rp_mutex); |
| 613 | |
| 614 | FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", |
| 615 | rport->port_id); |
| 616 | |
| 617 | if (rdata->rp_state != RPORT_ST_PRLI) { |
| 618 | FC_DBG("Received a PRLI response, but in state %s\n", |
| 619 | fc_rport_state(rport)); |
| 620 | goto out; |
| 621 | } |
| 622 | |
| 623 | if (IS_ERR(fp)) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 624 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 625 | goto err; |
| 626 | } |
| 627 | |
| 628 | op = fc_frame_payload_op(fp); |
| 629 | if (op == ELS_LS_ACC) { |
| 630 | pp = fc_frame_payload_get(fp, sizeof(*pp)); |
| 631 | if (pp && pp->prli.prli_spp_len >= sizeof(pp->spp)) { |
| 632 | fcp_parm = ntohl(pp->spp.spp_params); |
| 633 | if (fcp_parm & FCP_SPPF_RETRY) |
| 634 | rdata->flags |= FC_RP_FLAGS_RETRY; |
| 635 | } |
| 636 | |
| 637 | rport->supported_classes = FC_COS_CLASS3; |
| 638 | if (fcp_parm & FCP_SPPF_INIT_FCN) |
| 639 | roles |= FC_RPORT_ROLE_FCP_INITIATOR; |
| 640 | if (fcp_parm & FCP_SPPF_TARG_FCN) |
| 641 | roles |= FC_RPORT_ROLE_FCP_TARGET; |
| 642 | |
| 643 | rport->roles = roles; |
| 644 | fc_rport_enter_rtv(rport); |
| 645 | |
| 646 | } else { |
| 647 | FC_DBG("Bad ELS response\n"); |
| 648 | rdata->event = RPORT_EV_FAILED; |
| 649 | queue_work(rport_event_queue, &rdata->event_work); |
| 650 | } |
| 651 | |
| 652 | out: |
| 653 | fc_frame_free(fp); |
| 654 | err: |
| 655 | mutex_unlock(&rdata->rp_mutex); |
| 656 | put_device(&rport->dev); |
| 657 | } |
| 658 | |
| 659 | /** |
| 660 | * fc_rport_logo_resp - Logout (LOGO) response handler |
| 661 | * @sp: current sequence in the LOGO exchange |
| 662 | * @fp: response frame |
| 663 | * @rp_arg: Fibre Channel remote port |
| 664 | * |
| 665 | * Locking Note: This function will be called without the rport lock |
| 666 | * held, but it will lock, call an _enter_* function or fc_rport_error |
| 667 | * and then unlock the rport. |
| 668 | */ |
| 669 | static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, |
| 670 | void *rp_arg) |
| 671 | { |
| 672 | struct fc_rport *rport = rp_arg; |
| 673 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 674 | u8 op; |
| 675 | |
| 676 | mutex_lock(&rdata->rp_mutex); |
| 677 | |
| 678 | FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", |
| 679 | rport->port_id); |
| 680 | |
| 681 | if (IS_ERR(fp)) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 682 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 683 | goto err; |
| 684 | } |
| 685 | |
| 686 | if (rdata->rp_state != RPORT_ST_LOGO) { |
| 687 | FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", |
| 688 | fc_rport_state(rport)); |
| 689 | goto out; |
| 690 | } |
| 691 | |
| 692 | op = fc_frame_payload_op(fp); |
| 693 | if (op == ELS_LS_ACC) { |
| 694 | fc_rport_enter_rtv(rport); |
| 695 | } else { |
| 696 | FC_DBG("Bad ELS response\n"); |
| 697 | rdata->event = RPORT_EV_LOGO; |
| 698 | queue_work(rport_event_queue, &rdata->event_work); |
| 699 | } |
| 700 | |
| 701 | out: |
| 702 | fc_frame_free(fp); |
| 703 | err: |
| 704 | mutex_unlock(&rdata->rp_mutex); |
| 705 | put_device(&rport->dev); |
| 706 | } |
| 707 | |
| 708 | /** |
| 709 | * fc_rport_enter_prli - Send Process Login (PRLI) request to peer |
| 710 | * @rport: Fibre Channel remote port to send PRLI to |
| 711 | * |
| 712 | * Locking Note: The rport lock is expected to be held before calling |
| 713 | * this routine. |
| 714 | */ |
| 715 | static void fc_rport_enter_prli(struct fc_rport *rport) |
| 716 | { |
| 717 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 718 | struct fc_lport *lport = rdata->local_port; |
| 719 | struct { |
| 720 | struct fc_els_prli prli; |
| 721 | struct fc_els_spp spp; |
| 722 | } *pp; |
| 723 | struct fc_frame *fp; |
| 724 | |
| 725 | FC_DEBUG_RPORT("Port (%6x) entered PRLI state from %s state\n", |
| 726 | rport->port_id, fc_rport_state(rport)); |
| 727 | |
| 728 | fc_rport_state_enter(rport, RPORT_ST_PRLI); |
| 729 | |
| 730 | fp = fc_frame_alloc(lport, sizeof(*pp)); |
| 731 | if (!fp) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 732 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 733 | return; |
| 734 | } |
| 735 | |
| 736 | if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, |
| 737 | fc_rport_prli_resp, rport, lport->e_d_tov)) |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 738 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 739 | else |
| 740 | get_device(&rport->dev); |
| 741 | } |
| 742 | |
| 743 | /** |
| 744 | * fc_rport_els_rtv_resp - Request Timeout Value response handler |
| 745 | * @sp: current sequence in the RTV exchange |
| 746 | * @fp: response frame |
| 747 | * @rp_arg: Fibre Channel remote port |
| 748 | * |
| 749 | * Many targets don't seem to support this. |
| 750 | * |
| 751 | * Locking Note: This function will be called without the rport lock |
| 752 | * held, but it will lock, call an _enter_* function or fc_rport_error |
| 753 | * and then unlock the rport. |
| 754 | */ |
| 755 | static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, |
| 756 | void *rp_arg) |
| 757 | { |
| 758 | struct fc_rport *rport = rp_arg; |
| 759 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 760 | u8 op; |
| 761 | |
| 762 | mutex_lock(&rdata->rp_mutex); |
| 763 | |
| 764 | FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", |
| 765 | rport->port_id); |
| 766 | |
| 767 | if (rdata->rp_state != RPORT_ST_RTV) { |
| 768 | FC_DBG("Received a RTV response, but in state %s\n", |
| 769 | fc_rport_state(rport)); |
| 770 | goto out; |
| 771 | } |
| 772 | |
| 773 | if (IS_ERR(fp)) { |
| 774 | fc_rport_error(rport, fp); |
| 775 | goto err; |
| 776 | } |
| 777 | |
| 778 | op = fc_frame_payload_op(fp); |
| 779 | if (op == ELS_LS_ACC) { |
| 780 | struct fc_els_rtv_acc *rtv; |
| 781 | u32 toq; |
| 782 | u32 tov; |
| 783 | |
| 784 | rtv = fc_frame_payload_get(fp, sizeof(*rtv)); |
| 785 | if (rtv) { |
| 786 | toq = ntohl(rtv->rtv_toq); |
| 787 | tov = ntohl(rtv->rtv_r_a_tov); |
| 788 | if (tov == 0) |
| 789 | tov = 1; |
| 790 | rdata->r_a_tov = tov; |
| 791 | tov = ntohl(rtv->rtv_e_d_tov); |
| 792 | if (toq & FC_ELS_RTV_EDRES) |
| 793 | tov /= 1000000; |
| 794 | if (tov == 0) |
| 795 | tov = 1; |
| 796 | rdata->e_d_tov = tov; |
| 797 | } |
| 798 | } |
| 799 | |
| 800 | fc_rport_enter_ready(rport); |
| 801 | |
| 802 | out: |
| 803 | fc_frame_free(fp); |
| 804 | err: |
| 805 | mutex_unlock(&rdata->rp_mutex); |
| 806 | put_device(&rport->dev); |
| 807 | } |
| 808 | |
| 809 | /** |
| 810 | * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer |
| 811 | * @rport: Fibre Channel remote port to send RTV to |
| 812 | * |
| 813 | * Locking Note: The rport lock is expected to be held before calling |
| 814 | * this routine. |
| 815 | */ |
| 816 | static void fc_rport_enter_rtv(struct fc_rport *rport) |
| 817 | { |
| 818 | struct fc_frame *fp; |
| 819 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 820 | struct fc_lport *lport = rdata->local_port; |
| 821 | |
| 822 | FC_DEBUG_RPORT("Port (%6x) entered RTV state from %s state\n", |
| 823 | rport->port_id, fc_rport_state(rport)); |
| 824 | |
| 825 | fc_rport_state_enter(rport, RPORT_ST_RTV); |
| 826 | |
| 827 | fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); |
| 828 | if (!fp) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 829 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 830 | return; |
| 831 | } |
| 832 | |
| 833 | if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, |
| 834 | fc_rport_rtv_resp, rport, lport->e_d_tov)) |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 835 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 836 | else |
| 837 | get_device(&rport->dev); |
| 838 | } |
| 839 | |
| 840 | /** |
| 841 | * fc_rport_enter_logo - Send Logout (LOGO) request to peer |
| 842 | * @rport: Fibre Channel remote port to send LOGO to |
| 843 | * |
| 844 | * Locking Note: The rport lock is expected to be held before calling |
| 845 | * this routine. |
| 846 | */ |
| 847 | static void fc_rport_enter_logo(struct fc_rport *rport) |
| 848 | { |
| 849 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 850 | struct fc_lport *lport = rdata->local_port; |
| 851 | struct fc_frame *fp; |
| 852 | |
| 853 | FC_DEBUG_RPORT("Port (%6x) entered LOGO state from %s state\n", |
| 854 | rport->port_id, fc_rport_state(rport)); |
| 855 | |
| 856 | fc_rport_state_enter(rport, RPORT_ST_LOGO); |
| 857 | |
| 858 | fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); |
| 859 | if (!fp) { |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 860 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 861 | return; |
| 862 | } |
| 863 | |
| 864 | if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, |
| 865 | fc_rport_logo_resp, rport, lport->e_d_tov)) |
Chris Leech | 6755db1 | 2009-02-27 10:55:02 -0800 | [diff] [blame^] | 866 | fc_rport_error_retry(rport, fp); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 867 | else |
| 868 | get_device(&rport->dev); |
| 869 | } |
| 870 | |
| 871 | |
| 872 | /** |
| 873 | * fc_rport_recv_req - Receive a request from a rport |
| 874 | * @sp: current sequence in the PLOGI exchange |
| 875 | * @fp: response frame |
| 876 | * @rp_arg: Fibre Channel remote port |
| 877 | * |
| 878 | * Locking Note: Called without the rport lock held. This |
| 879 | * function will hold the rport lock, call an _enter_* |
| 880 | * function and then unlock the rport. |
| 881 | */ |
| 882 | void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, |
| 883 | struct fc_rport *rport) |
| 884 | { |
| 885 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 886 | struct fc_lport *lport = rdata->local_port; |
| 887 | |
| 888 | struct fc_frame_header *fh; |
| 889 | struct fc_seq_els_data els_data; |
| 890 | u8 op; |
| 891 | |
| 892 | mutex_lock(&rdata->rp_mutex); |
| 893 | |
| 894 | els_data.fp = NULL; |
| 895 | els_data.explan = ELS_EXPL_NONE; |
| 896 | els_data.reason = ELS_RJT_NONE; |
| 897 | |
| 898 | fh = fc_frame_header_get(fp); |
| 899 | |
| 900 | if (fh->fh_r_ctl == FC_RCTL_ELS_REQ && fh->fh_type == FC_TYPE_ELS) { |
| 901 | op = fc_frame_payload_op(fp); |
| 902 | switch (op) { |
| 903 | case ELS_PLOGI: |
| 904 | fc_rport_recv_plogi_req(rport, sp, fp); |
| 905 | break; |
| 906 | case ELS_PRLI: |
| 907 | fc_rport_recv_prli_req(rport, sp, fp); |
| 908 | break; |
| 909 | case ELS_PRLO: |
| 910 | fc_rport_recv_prlo_req(rport, sp, fp); |
| 911 | break; |
| 912 | case ELS_LOGO: |
| 913 | fc_rport_recv_logo_req(rport, sp, fp); |
| 914 | break; |
| 915 | case ELS_RRQ: |
| 916 | els_data.fp = fp; |
| 917 | lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data); |
| 918 | break; |
| 919 | case ELS_REC: |
| 920 | els_data.fp = fp; |
| 921 | lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data); |
| 922 | break; |
| 923 | default: |
| 924 | els_data.reason = ELS_RJT_UNSUP; |
| 925 | lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data); |
| 926 | break; |
| 927 | } |
| 928 | } |
| 929 | |
| 930 | mutex_unlock(&rdata->rp_mutex); |
| 931 | } |
| 932 | |
| 933 | /** |
| 934 | * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request |
| 935 | * @rport: Fibre Channel remote port that initiated PLOGI |
| 936 | * @sp: current sequence in the PLOGI exchange |
| 937 | * @fp: PLOGI request frame |
| 938 | * |
| 939 | * Locking Note: The rport lock is exected to be held before calling |
| 940 | * this function. |
| 941 | */ |
| 942 | static void fc_rport_recv_plogi_req(struct fc_rport *rport, |
| 943 | struct fc_seq *sp, struct fc_frame *rx_fp) |
| 944 | { |
| 945 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 946 | struct fc_lport *lport = rdata->local_port; |
| 947 | struct fc_frame *fp = rx_fp; |
| 948 | struct fc_exch *ep; |
| 949 | struct fc_frame_header *fh; |
| 950 | struct fc_els_flogi *pl; |
| 951 | struct fc_seq_els_data rjt_data; |
| 952 | u32 sid; |
| 953 | u64 wwpn; |
| 954 | u64 wwnn; |
| 955 | enum fc_els_rjt_reason reject = 0; |
| 956 | u32 f_ctl; |
| 957 | rjt_data.fp = NULL; |
| 958 | |
| 959 | fh = fc_frame_header_get(fp); |
| 960 | |
| 961 | FC_DEBUG_RPORT("Received PLOGI request from port (%6x) " |
| 962 | "while in state %s\n", ntoh24(fh->fh_s_id), |
| 963 | fc_rport_state(rport)); |
| 964 | |
| 965 | sid = ntoh24(fh->fh_s_id); |
| 966 | pl = fc_frame_payload_get(fp, sizeof(*pl)); |
| 967 | if (!pl) { |
| 968 | FC_DBG("incoming PLOGI from %x too short\n", sid); |
| 969 | WARN_ON(1); |
| 970 | /* XXX TBD: send reject? */ |
| 971 | fc_frame_free(fp); |
| 972 | return; |
| 973 | } |
| 974 | wwpn = get_unaligned_be64(&pl->fl_wwpn); |
| 975 | wwnn = get_unaligned_be64(&pl->fl_wwnn); |
| 976 | |
| 977 | /* |
| 978 | * If the session was just created, possibly due to the incoming PLOGI, |
| 979 | * set the state appropriately and accept the PLOGI. |
| 980 | * |
| 981 | * If we had also sent a PLOGI, and if the received PLOGI is from a |
| 982 | * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason |
| 983 | * "command already in progress". |
| 984 | * |
| 985 | * XXX TBD: If the session was ready before, the PLOGI should result in |
| 986 | * all outstanding exchanges being reset. |
| 987 | */ |
| 988 | switch (rdata->rp_state) { |
| 989 | case RPORT_ST_INIT: |
| 990 | FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT " |
| 991 | "- reject\n", sid, wwpn); |
| 992 | reject = ELS_RJT_UNSUP; |
| 993 | break; |
| 994 | case RPORT_ST_PLOGI: |
| 995 | FC_DEBUG_RPORT("incoming PLOGI from %x in PLOGI state %d\n", |
| 996 | sid, rdata->rp_state); |
| 997 | if (wwpn < lport->wwpn) |
| 998 | reject = ELS_RJT_INPROG; |
| 999 | break; |
| 1000 | case RPORT_ST_PRLI: |
| 1001 | case RPORT_ST_READY: |
| 1002 | FC_DEBUG_RPORT("incoming PLOGI from %x in logged-in state %d " |
| 1003 | "- ignored for now\n", sid, rdata->rp_state); |
| 1004 | /* XXX TBD - should reset */ |
| 1005 | break; |
| 1006 | case RPORT_ST_NONE: |
| 1007 | default: |
| 1008 | FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " |
| 1009 | "state %d\n", sid, rdata->rp_state); |
| 1010 | break; |
| 1011 | } |
| 1012 | |
| 1013 | if (reject) { |
| 1014 | rjt_data.reason = reject; |
| 1015 | rjt_data.explan = ELS_EXPL_NONE; |
| 1016 | lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| 1017 | fc_frame_free(fp); |
| 1018 | } else { |
| 1019 | fp = fc_frame_alloc(lport, sizeof(*pl)); |
| 1020 | if (fp == NULL) { |
| 1021 | fp = rx_fp; |
| 1022 | rjt_data.reason = ELS_RJT_UNAB; |
| 1023 | rjt_data.explan = ELS_EXPL_NONE; |
| 1024 | lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| 1025 | fc_frame_free(fp); |
| 1026 | } else { |
| 1027 | sp = lport->tt.seq_start_next(sp); |
| 1028 | WARN_ON(!sp); |
| 1029 | fc_rport_set_name(rport, wwpn, wwnn); |
| 1030 | |
| 1031 | /* |
| 1032 | * Get session payload size from incoming PLOGI. |
| 1033 | */ |
| 1034 | rport->maxframe_size = |
| 1035 | fc_plogi_get_maxframe(pl, lport->mfs); |
| 1036 | fc_frame_free(rx_fp); |
| 1037 | fc_plogi_fill(lport, fp, ELS_LS_ACC); |
| 1038 | |
| 1039 | /* |
| 1040 | * Send LS_ACC. If this fails, |
| 1041 | * the originator should retry. |
| 1042 | */ |
| 1043 | f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; |
| 1044 | f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; |
| 1045 | ep = fc_seq_exch(sp); |
| 1046 | fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| 1047 | FC_TYPE_ELS, f_ctl, 0); |
| 1048 | lport->tt.seq_send(lport, sp, fp); |
| 1049 | if (rdata->rp_state == RPORT_ST_PLOGI) |
| 1050 | fc_rport_enter_prli(rport); |
| 1051 | } |
| 1052 | } |
| 1053 | } |
| 1054 | |
| 1055 | /** |
| 1056 | * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request |
| 1057 | * @rport: Fibre Channel remote port that initiated PRLI |
| 1058 | * @sp: current sequence in the PRLI exchange |
| 1059 | * @fp: PRLI request frame |
| 1060 | * |
| 1061 | * Locking Note: The rport lock is exected to be held before calling |
| 1062 | * this function. |
| 1063 | */ |
| 1064 | static void fc_rport_recv_prli_req(struct fc_rport *rport, |
| 1065 | struct fc_seq *sp, struct fc_frame *rx_fp) |
| 1066 | { |
| 1067 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 1068 | struct fc_lport *lport = rdata->local_port; |
| 1069 | struct fc_exch *ep; |
| 1070 | struct fc_frame *fp; |
| 1071 | struct fc_frame_header *fh; |
| 1072 | struct { |
| 1073 | struct fc_els_prli prli; |
| 1074 | struct fc_els_spp spp; |
| 1075 | } *pp; |
| 1076 | struct fc_els_spp *rspp; /* request service param page */ |
| 1077 | struct fc_els_spp *spp; /* response spp */ |
| 1078 | unsigned int len; |
| 1079 | unsigned int plen; |
| 1080 | enum fc_els_rjt_reason reason = ELS_RJT_UNAB; |
| 1081 | enum fc_els_rjt_explan explan = ELS_EXPL_NONE; |
| 1082 | enum fc_els_spp_resp resp; |
| 1083 | struct fc_seq_els_data rjt_data; |
| 1084 | u32 f_ctl; |
| 1085 | u32 fcp_parm; |
| 1086 | u32 roles = FC_RPORT_ROLE_UNKNOWN; |
| 1087 | rjt_data.fp = NULL; |
| 1088 | |
| 1089 | fh = fc_frame_header_get(rx_fp); |
| 1090 | |
| 1091 | FC_DEBUG_RPORT("Received PRLI request from port (%6x) " |
| 1092 | "while in state %s\n", ntoh24(fh->fh_s_id), |
| 1093 | fc_rport_state(rport)); |
| 1094 | |
| 1095 | switch (rdata->rp_state) { |
| 1096 | case RPORT_ST_PRLI: |
| 1097 | case RPORT_ST_READY: |
| 1098 | reason = ELS_RJT_NONE; |
| 1099 | break; |
| 1100 | default: |
| 1101 | break; |
| 1102 | } |
| 1103 | len = fr_len(rx_fp) - sizeof(*fh); |
| 1104 | pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); |
| 1105 | if (pp == NULL) { |
| 1106 | reason = ELS_RJT_PROT; |
| 1107 | explan = ELS_EXPL_INV_LEN; |
| 1108 | } else { |
| 1109 | plen = ntohs(pp->prli.prli_len); |
| 1110 | if ((plen % 4) != 0 || plen > len) { |
| 1111 | reason = ELS_RJT_PROT; |
| 1112 | explan = ELS_EXPL_INV_LEN; |
| 1113 | } else if (plen < len) { |
| 1114 | len = plen; |
| 1115 | } |
| 1116 | plen = pp->prli.prli_spp_len; |
| 1117 | if ((plen % 4) != 0 || plen < sizeof(*spp) || |
| 1118 | plen > len || len < sizeof(*pp)) { |
| 1119 | reason = ELS_RJT_PROT; |
| 1120 | explan = ELS_EXPL_INV_LEN; |
| 1121 | } |
| 1122 | rspp = &pp->spp; |
| 1123 | } |
| 1124 | if (reason != ELS_RJT_NONE || |
| 1125 | (fp = fc_frame_alloc(lport, len)) == NULL) { |
| 1126 | rjt_data.reason = reason; |
| 1127 | rjt_data.explan = explan; |
| 1128 | lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| 1129 | } else { |
| 1130 | sp = lport->tt.seq_start_next(sp); |
| 1131 | WARN_ON(!sp); |
| 1132 | pp = fc_frame_payload_get(fp, len); |
| 1133 | WARN_ON(!pp); |
| 1134 | memset(pp, 0, len); |
| 1135 | pp->prli.prli_cmd = ELS_LS_ACC; |
| 1136 | pp->prli.prli_spp_len = plen; |
| 1137 | pp->prli.prli_len = htons(len); |
| 1138 | len -= sizeof(struct fc_els_prli); |
| 1139 | |
| 1140 | /* |
| 1141 | * Go through all the service parameter pages and build |
| 1142 | * response. If plen indicates longer SPP than standard, |
| 1143 | * use that. The entire response has been pre-cleared above. |
| 1144 | */ |
| 1145 | spp = &pp->spp; |
| 1146 | while (len >= plen) { |
| 1147 | spp->spp_type = rspp->spp_type; |
| 1148 | spp->spp_type_ext = rspp->spp_type_ext; |
| 1149 | spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; |
| 1150 | resp = FC_SPP_RESP_ACK; |
| 1151 | if (rspp->spp_flags & FC_SPP_RPA_VAL) |
| 1152 | resp = FC_SPP_RESP_NO_PA; |
| 1153 | switch (rspp->spp_type) { |
| 1154 | case 0: /* common to all FC-4 types */ |
| 1155 | break; |
| 1156 | case FC_TYPE_FCP: |
| 1157 | fcp_parm = ntohl(rspp->spp_params); |
| 1158 | if (fcp_parm * FCP_SPPF_RETRY) |
| 1159 | rdata->flags |= FC_RP_FLAGS_RETRY; |
| 1160 | rport->supported_classes = FC_COS_CLASS3; |
| 1161 | if (fcp_parm & FCP_SPPF_INIT_FCN) |
| 1162 | roles |= FC_RPORT_ROLE_FCP_INITIATOR; |
| 1163 | if (fcp_parm & FCP_SPPF_TARG_FCN) |
| 1164 | roles |= FC_RPORT_ROLE_FCP_TARGET; |
| 1165 | rport->roles = roles; |
| 1166 | |
| 1167 | spp->spp_params = |
| 1168 | htonl(lport->service_params); |
| 1169 | break; |
| 1170 | default: |
| 1171 | resp = FC_SPP_RESP_INVL; |
| 1172 | break; |
| 1173 | } |
| 1174 | spp->spp_flags |= resp; |
| 1175 | len -= plen; |
| 1176 | rspp = (struct fc_els_spp *)((char *)rspp + plen); |
| 1177 | spp = (struct fc_els_spp *)((char *)spp + plen); |
| 1178 | } |
| 1179 | |
| 1180 | /* |
| 1181 | * Send LS_ACC. If this fails, the originator should retry. |
| 1182 | */ |
| 1183 | f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; |
| 1184 | f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; |
| 1185 | ep = fc_seq_exch(sp); |
| 1186 | fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| 1187 | FC_TYPE_ELS, f_ctl, 0); |
| 1188 | lport->tt.seq_send(lport, sp, fp); |
| 1189 | |
| 1190 | /* |
| 1191 | * Get lock and re-check state. |
| 1192 | */ |
| 1193 | switch (rdata->rp_state) { |
| 1194 | case RPORT_ST_PRLI: |
| 1195 | fc_rport_enter_ready(rport); |
| 1196 | break; |
| 1197 | case RPORT_ST_READY: |
| 1198 | break; |
| 1199 | default: |
| 1200 | break; |
| 1201 | } |
| 1202 | } |
| 1203 | fc_frame_free(rx_fp); |
| 1204 | } |
| 1205 | |
| 1206 | /** |
| 1207 | * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request |
| 1208 | * @rport: Fibre Channel remote port that initiated PRLO |
| 1209 | * @sp: current sequence in the PRLO exchange |
| 1210 | * @fp: PRLO request frame |
| 1211 | * |
| 1212 | * Locking Note: The rport lock is exected to be held before calling |
| 1213 | * this function. |
| 1214 | */ |
| 1215 | static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, |
| 1216 | struct fc_frame *fp) |
| 1217 | { |
| 1218 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 1219 | struct fc_lport *lport = rdata->local_port; |
| 1220 | |
| 1221 | struct fc_frame_header *fh; |
| 1222 | struct fc_seq_els_data rjt_data; |
| 1223 | |
| 1224 | fh = fc_frame_header_get(fp); |
| 1225 | |
| 1226 | FC_DEBUG_RPORT("Received PRLO request from port (%6x) " |
| 1227 | "while in state %s\n", ntoh24(fh->fh_s_id), |
| 1228 | fc_rport_state(rport)); |
| 1229 | |
| 1230 | rjt_data.fp = NULL; |
| 1231 | rjt_data.reason = ELS_RJT_UNAB; |
| 1232 | rjt_data.explan = ELS_EXPL_NONE; |
| 1233 | lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| 1234 | fc_frame_free(fp); |
| 1235 | } |
| 1236 | |
| 1237 | /** |
| 1238 | * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request |
| 1239 | * @rport: Fibre Channel remote port that initiated LOGO |
| 1240 | * @sp: current sequence in the LOGO exchange |
| 1241 | * @fp: LOGO request frame |
| 1242 | * |
| 1243 | * Locking Note: The rport lock is exected to be held before calling |
| 1244 | * this function. |
| 1245 | */ |
| 1246 | static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, |
| 1247 | struct fc_frame *fp) |
| 1248 | { |
| 1249 | struct fc_frame_header *fh; |
| 1250 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 1251 | struct fc_lport *lport = rdata->local_port; |
| 1252 | |
| 1253 | fh = fc_frame_header_get(fp); |
| 1254 | |
| 1255 | FC_DEBUG_RPORT("Received LOGO request from port (%6x) " |
| 1256 | "while in state %s\n", ntoh24(fh->fh_s_id), |
| 1257 | fc_rport_state(rport)); |
| 1258 | |
| 1259 | rdata->event = RPORT_EV_LOGO; |
| 1260 | queue_work(rport_event_queue, &rdata->event_work); |
| 1261 | |
| 1262 | lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); |
| 1263 | fc_frame_free(fp); |
| 1264 | } |
| 1265 | |
| 1266 | static void fc_rport_flush_queue(void) |
| 1267 | { |
| 1268 | flush_workqueue(rport_event_queue); |
| 1269 | } |
| 1270 | |
| 1271 | |
| 1272 | int fc_rport_init(struct fc_lport *lport) |
| 1273 | { |
| 1274 | if (!lport->tt.rport_login) |
| 1275 | lport->tt.rport_login = fc_rport_login; |
| 1276 | |
| 1277 | if (!lport->tt.rport_logoff) |
| 1278 | lport->tt.rport_logoff = fc_rport_logoff; |
| 1279 | |
| 1280 | if (!lport->tt.rport_recv_req) |
| 1281 | lport->tt.rport_recv_req = fc_rport_recv_req; |
| 1282 | |
| 1283 | if (!lport->tt.rport_flush_queue) |
| 1284 | lport->tt.rport_flush_queue = fc_rport_flush_queue; |
| 1285 | |
| 1286 | return 0; |
| 1287 | } |
| 1288 | EXPORT_SYMBOL(fc_rport_init); |
| 1289 | |
| 1290 | int fc_setup_rport() |
| 1291 | { |
| 1292 | rport_event_queue = create_singlethread_workqueue("fc_rport_eq"); |
| 1293 | if (!rport_event_queue) |
| 1294 | return -ENOMEM; |
| 1295 | return 0; |
| 1296 | } |
| 1297 | EXPORT_SYMBOL(fc_setup_rport); |
| 1298 | |
| 1299 | void fc_destroy_rport() |
| 1300 | { |
| 1301 | destroy_workqueue(rport_event_queue); |
| 1302 | } |
| 1303 | EXPORT_SYMBOL(fc_destroy_rport); |
| 1304 | |
| 1305 | void fc_rport_terminate_io(struct fc_rport *rport) |
| 1306 | { |
| 1307 | struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| 1308 | struct fc_lport *lport = rdata->local_port; |
| 1309 | |
Abhijeet Joglekar | 1f6ff36 | 2009-02-27 10:54:35 -0800 | [diff] [blame] | 1310 | lport->tt.exch_mgr_reset(lport, 0, rport->port_id); |
| 1311 | lport->tt.exch_mgr_reset(lport, rport->port_id, 0); |
Robert Love | 42e9a92 | 2008-12-09 15:10:17 -0800 | [diff] [blame] | 1312 | } |
| 1313 | EXPORT_SYMBOL(fc_rport_terminate_io); |