John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 1 | /* |
| 2 | |
| 3 | Broadcom BCM43xx wireless driver |
| 4 | |
| 5 | Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| 6 | Stefano Brivio <st3@riseup.net> |
| 7 | Michael Buesch <mbuesch@freenet.de> |
| 8 | Danny van Dyk <kugelfang@gentoo.org> |
| 9 | Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| 10 | |
| 11 | Some parts of the code in this file are derived from the ipw2200 |
| 12 | driver Copyright(c) 2003 - 2004 Intel Corporation. |
| 13 | |
| 14 | This program is free software; you can redistribute it and/or modify |
| 15 | it under the terms of the GNU General Public License as published by |
| 16 | the Free Software Foundation; either version 2 of the License, or |
| 17 | (at your option) any later version. |
| 18 | |
| 19 | This program is distributed in the hope that it will be useful, |
| 20 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 21 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 22 | GNU General Public License for more details. |
| 23 | |
| 24 | You should have received a copy of the GNU General Public License |
| 25 | along with this program; see the file COPYING. If not, write to |
| 26 | the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| 27 | Boston, MA 02110-1301, USA. |
| 28 | |
| 29 | */ |
| 30 | |
| 31 | #include <linux/delay.h> |
| 32 | |
| 33 | #include "bcm43xx.h" |
| 34 | #include "bcm43xx_power.h" |
| 35 | #include "bcm43xx_main.h" |
| 36 | |
| 37 | |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 38 | /* Get the Slow Clock Source */ |
| 39 | static int bcm43xx_pctl_get_slowclksrc(struct bcm43xx_private *bcm) |
| 40 | { |
| 41 | u32 tmp; |
| 42 | int err; |
| 43 | |
| 44 | assert(bcm->current_core == &bcm->core_chipcommon); |
| 45 | if (bcm->current_core->rev < 6) { |
| 46 | if (bcm->bustype == BCM43xx_BUSTYPE_PCMCIA || |
| 47 | bcm->bustype == BCM43xx_BUSTYPE_SB) |
| 48 | return BCM43xx_PCTL_CLKSRC_XTALOS; |
| 49 | if (bcm->bustype == BCM43xx_BUSTYPE_PCI) { |
| 50 | err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp); |
| 51 | assert(!err); |
| 52 | if (tmp & 0x10) |
| 53 | return BCM43xx_PCTL_CLKSRC_PCI; |
| 54 | return BCM43xx_PCTL_CLKSRC_XTALOS; |
| 55 | } |
| 56 | } |
| 57 | if (bcm->current_core->rev < 10) { |
| 58 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL); |
| 59 | tmp &= 0x7; |
| 60 | if (tmp == 0) |
| 61 | return BCM43xx_PCTL_CLKSRC_LOPWROS; |
| 62 | if (tmp == 1) |
| 63 | return BCM43xx_PCTL_CLKSRC_XTALOS; |
| 64 | if (tmp == 2) |
| 65 | return BCM43xx_PCTL_CLKSRC_PCI; |
| 66 | } |
| 67 | |
| 68 | return BCM43xx_PCTL_CLKSRC_XTALOS; |
| 69 | } |
| 70 | |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 71 | /* Get max/min slowclock frequency |
| 72 | * as described in http://bcm-specs.sipsolutions.net/PowerControl |
| 73 | */ |
| 74 | static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm, |
| 75 | int get_max) |
| 76 | { |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 77 | int limit; |
| 78 | int clocksrc; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 79 | int divisor; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 80 | u32 tmp; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 81 | |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 82 | assert(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL); |
| 83 | assert(bcm->current_core == &bcm->core_chipcommon); |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 84 | |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 85 | clocksrc = bcm43xx_pctl_get_slowclksrc(bcm); |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 86 | if (bcm->current_core->rev < 6) { |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 87 | switch (clocksrc) { |
| 88 | case BCM43xx_PCTL_CLKSRC_PCI: |
| 89 | divisor = 64; |
| 90 | break; |
| 91 | case BCM43xx_PCTL_CLKSRC_XTALOS: |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 92 | divisor = 32; |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 93 | break; |
| 94 | default: |
| 95 | assert(0); |
| 96 | divisor = 1; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 97 | } |
| 98 | } else if (bcm->current_core->rev < 10) { |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 99 | switch (clocksrc) { |
| 100 | case BCM43xx_PCTL_CLKSRC_LOPWROS: |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 101 | divisor = 1; |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 102 | break; |
| 103 | case BCM43xx_PCTL_CLKSRC_XTALOS: |
| 104 | case BCM43xx_PCTL_CLKSRC_PCI: |
| 105 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL); |
| 106 | divisor = ((tmp & 0xFFFF0000) >> 16) + 1; |
| 107 | divisor *= 4; |
| 108 | break; |
| 109 | default: |
| 110 | assert(0); |
| 111 | divisor = 1; |
| 112 | } |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 113 | } else { |
| 114 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL); |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 115 | divisor = ((tmp & 0xFFFF0000) >> 16) + 1; |
| 116 | divisor *= 4; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 117 | } |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 118 | |
| 119 | switch (clocksrc) { |
| 120 | case BCM43xx_PCTL_CLKSRC_LOPWROS: |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 121 | if (get_max) |
| 122 | limit = 43000; |
| 123 | else |
| 124 | limit = 25000; |
| 125 | break; |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 126 | case BCM43xx_PCTL_CLKSRC_XTALOS: |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 127 | if (get_max) |
| 128 | limit = 20200000; |
| 129 | else |
| 130 | limit = 19800000; |
| 131 | break; |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 132 | case BCM43xx_PCTL_CLKSRC_PCI: |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 133 | if (get_max) |
| 134 | limit = 34000000; |
| 135 | else |
| 136 | limit = 25000000; |
| 137 | break; |
| 138 | default: |
| 139 | assert(0); |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 140 | limit = 0; |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 141 | } |
| 142 | limit /= divisor; |
| 143 | |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 144 | return limit; |
| 145 | } |
| 146 | |
Michael Buesch | 8829d55 | 2006-04-13 02:30:26 +0200 | [diff] [blame] | 147 | |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 148 | /* init power control |
| 149 | * as described in http://bcm-specs.sipsolutions.net/PowerControl |
| 150 | */ |
| 151 | int bcm43xx_pctl_init(struct bcm43xx_private *bcm) |
| 152 | { |
| 153 | int err, maxfreq; |
| 154 | struct bcm43xx_coreinfo *old_core; |
| 155 | |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 156 | old_core = bcm->current_core; |
| 157 | err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| 158 | if (err == -ENODEV) |
| 159 | return 0; |
| 160 | if (err) |
| 161 | goto out; |
| 162 | |
Stefano Brivio | f3d1fca | 2006-10-15 23:18:11 -0500 | [diff] [blame] | 163 | if (bcm->chip_id == 0x4321) { |
| 164 | if (bcm->chip_rev == 0) |
| 165 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x03A4); |
| 166 | if (bcm->chip_rev == 1) |
| 167 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x00A4); |
| 168 | } |
| 169 | |
| 170 | if (bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) { |
| 171 | if (bcm->current_core->rev >= 10) { |
| 172 | /* Set Idle Power clock rate to 1Mhz */ |
| 173 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL, |
| 174 | (bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL) |
| 175 | & 0x0000FFFF) | 0x40000); |
| 176 | } else { |
| 177 | maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1); |
| 178 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY, |
| 179 | (maxfreq * 150 + 999999) / 1000000); |
| 180 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY, |
| 181 | (maxfreq * 15 + 999999) / 1000000); |
| 182 | } |
| 183 | } |
John W. Linville | f222313 | 2006-01-23 16:59:58 -0500 | [diff] [blame] | 184 | |
| 185 | err = bcm43xx_switch_core(bcm, old_core); |
| 186 | assert(err == 0); |
| 187 | |
| 188 | out: |
| 189 | return err; |
| 190 | } |
| 191 | |
| 192 | u16 bcm43xx_pctl_powerup_delay(struct bcm43xx_private *bcm) |
| 193 | { |
| 194 | u16 delay = 0; |
| 195 | int err; |
| 196 | u32 pll_on_delay; |
| 197 | struct bcm43xx_coreinfo *old_core; |
| 198 | int minfreq; |
| 199 | |
| 200 | if (bcm->bustype != BCM43xx_BUSTYPE_PCI) |
| 201 | goto out; |
| 202 | if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL)) |
| 203 | goto out; |
| 204 | old_core = bcm->current_core; |
| 205 | err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| 206 | if (err == -ENODEV) |
| 207 | goto out; |
| 208 | |
| 209 | minfreq = bcm43xx_pctl_clockfreqlimit(bcm, 0); |
| 210 | pll_on_delay = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY); |
| 211 | delay = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq; |
| 212 | |
| 213 | err = bcm43xx_switch_core(bcm, old_core); |
| 214 | assert(err == 0); |
| 215 | |
| 216 | out: |
| 217 | return delay; |
| 218 | } |
| 219 | |
| 220 | /* set the powercontrol clock |
| 221 | * as described in http://bcm-specs.sipsolutions.net/PowerControl |
| 222 | */ |
| 223 | int bcm43xx_pctl_set_clock(struct bcm43xx_private *bcm, u16 mode) |
| 224 | { |
| 225 | int err; |
| 226 | struct bcm43xx_coreinfo *old_core; |
| 227 | u32 tmp; |
| 228 | |
| 229 | old_core = bcm->current_core; |
| 230 | err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| 231 | if (err == -ENODEV) |
| 232 | return 0; |
| 233 | if (err) |
| 234 | goto out; |
| 235 | |
| 236 | if (bcm->core_chipcommon.rev < 6) { |
| 237 | if (mode == BCM43xx_PCTL_CLK_FAST) { |
| 238 | err = bcm43xx_pctl_set_crystal(bcm, 1); |
| 239 | if (err) |
| 240 | goto out; |
| 241 | } |
| 242 | } else { |
| 243 | if ((bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) && |
| 244 | (bcm->core_chipcommon.rev < 10)) { |
| 245 | switch (mode) { |
| 246 | case BCM43xx_PCTL_CLK_FAST: |
| 247 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL); |
| 248 | tmp = (tmp & ~BCM43xx_PCTL_FORCE_SLOW) | BCM43xx_PCTL_FORCE_PLL; |
| 249 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp); |
| 250 | break; |
| 251 | case BCM43xx_PCTL_CLK_SLOW: |
| 252 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL); |
| 253 | tmp |= BCM43xx_PCTL_FORCE_SLOW; |
| 254 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp); |
| 255 | break; |
| 256 | case BCM43xx_PCTL_CLK_DYNAMIC: |
| 257 | tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL); |
| 258 | tmp &= ~BCM43xx_PCTL_FORCE_SLOW; |
| 259 | tmp |= BCM43xx_PCTL_FORCE_PLL; |
| 260 | tmp &= ~BCM43xx_PCTL_DYN_XTAL; |
| 261 | bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp); |
| 262 | } |
| 263 | } |
| 264 | } |
| 265 | |
| 266 | err = bcm43xx_switch_core(bcm, old_core); |
| 267 | assert(err == 0); |
| 268 | |
| 269 | out: |
| 270 | return err; |
| 271 | } |
| 272 | |
| 273 | int bcm43xx_pctl_set_crystal(struct bcm43xx_private *bcm, int on) |
| 274 | { |
| 275 | int err; |
| 276 | u32 in, out, outenable; |
| 277 | |
| 278 | err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_IN, &in); |
| 279 | if (err) |
| 280 | goto err_pci; |
| 281 | err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &out); |
| 282 | if (err) |
| 283 | goto err_pci; |
| 284 | err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUTENABLE, &outenable); |
| 285 | if (err) |
| 286 | goto err_pci; |
| 287 | |
| 288 | outenable |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN); |
| 289 | |
| 290 | if (on) { |
| 291 | if (in & 0x40) |
| 292 | return 0; |
| 293 | |
| 294 | out |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN); |
| 295 | |
| 296 | err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out); |
| 297 | if (err) |
| 298 | goto err_pci; |
| 299 | err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable); |
| 300 | if (err) |
| 301 | goto err_pci; |
| 302 | udelay(1000); |
| 303 | |
| 304 | out &= ~BCM43xx_PCTL_PLL_POWERDOWN; |
| 305 | err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out); |
| 306 | if (err) |
| 307 | goto err_pci; |
| 308 | udelay(5000); |
| 309 | } else { |
| 310 | if (bcm->current_core->rev < 5) |
| 311 | return 0; |
| 312 | if (bcm->sprom.boardflags & BCM43xx_BFL_XTAL_NOSLOW) |
| 313 | return 0; |
| 314 | |
| 315 | /* XXX: Why BCM43xx_MMIO_RADIO_HWENABLED_xx can't be read at this time? |
| 316 | * err = bcm43xx_switch_core(bcm, bcm->active_80211_core); |
| 317 | * if (err) |
| 318 | * return err; |
| 319 | * if (((bcm->current_core->rev >= 3) && |
| 320 | * (bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI) & (1 << 16))) || |
| 321 | * ((bcm->current_core->rev < 3) && |
| 322 | * !(bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO) & (1 << 4)))) |
| 323 | * return 0; |
| 324 | * err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon); |
| 325 | * if (err) |
| 326 | * return err; |
| 327 | */ |
| 328 | |
| 329 | err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW); |
| 330 | if (err) |
| 331 | goto out; |
| 332 | out &= ~BCM43xx_PCTL_XTAL_POWERUP; |
| 333 | out |= BCM43xx_PCTL_PLL_POWERDOWN; |
| 334 | err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out); |
| 335 | if (err) |
| 336 | goto err_pci; |
| 337 | err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable); |
| 338 | if (err) |
| 339 | goto err_pci; |
| 340 | } |
| 341 | |
| 342 | out: |
| 343 | return err; |
| 344 | |
| 345 | err_pci: |
| 346 | printk(KERN_ERR PFX "Error: pctl_set_clock() could not access PCI config space!\n"); |
| 347 | err = -EBUSY; |
| 348 | goto out; |
| 349 | } |
| 350 | |
| 351 | /* Set the PowerSavingControlBits. |
| 352 | * Bitvalues: |
| 353 | * 0 => unset the bit |
| 354 | * 1 => set the bit |
| 355 | * -1 => calculate the bit |
| 356 | */ |
| 357 | void bcm43xx_power_saving_ctl_bits(struct bcm43xx_private *bcm, |
| 358 | int bit25, int bit26) |
| 359 | { |
| 360 | int i; |
| 361 | u32 status; |
| 362 | |
| 363 | //FIXME: Force 25 to off and 26 to on for now: |
| 364 | bit25 = 0; |
| 365 | bit26 = 1; |
| 366 | |
| 367 | if (bit25 == -1) { |
| 368 | //TODO: If powersave is not off and FIXME is not set and we are not in adhoc |
| 369 | // and thus is not an AP and we are associated, set bit 25 |
| 370 | } |
| 371 | if (bit26 == -1) { |
| 372 | //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, |
| 373 | // or we are associated, or FIXME, or the latest PS-Poll packet sent was |
| 374 | // successful, set bit26 |
| 375 | } |
| 376 | status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); |
| 377 | if (bit25) |
| 378 | status |= BCM43xx_SBF_PS1; |
| 379 | else |
| 380 | status &= ~BCM43xx_SBF_PS1; |
| 381 | if (bit26) |
| 382 | status |= BCM43xx_SBF_PS2; |
| 383 | else |
| 384 | status &= ~BCM43xx_SBF_PS2; |
| 385 | bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status); |
| 386 | if (bit26 && bcm->current_core->rev >= 5) { |
| 387 | for (i = 0; i < 100; i++) { |
| 388 | if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0040) != 4) |
| 389 | break; |
| 390 | udelay(10); |
| 391 | } |
| 392 | } |
| 393 | } |