adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 1 | /* |
| 2 | 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux. |
| 3 | |
| 4 | Written By: Adam Radford <linuxraid@lsi.com> |
| 5 | |
| 6 | Copyright (C) 2009 LSI Corporation. |
| 7 | |
| 8 | This program is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; version 2 of the License. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | NO WARRANTY |
| 18 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 19 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 20 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 21 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 22 | solely responsible for determining the appropriateness of using and |
| 23 | distributing the Program and assumes all risks associated with its |
| 24 | exercise of rights under this Agreement, including but not limited to |
| 25 | the risks and costs of program errors, damage to or loss of data, |
| 26 | programs or equipment, and unavailability or interruption of operations. |
| 27 | |
| 28 | DISCLAIMER OF LIABILITY |
| 29 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 30 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 31 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 32 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 33 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 34 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 35 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 36 | |
| 37 | You should have received a copy of the GNU General Public License |
| 38 | along with this program; if not, write to the Free Software |
| 39 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 40 | |
| 41 | Controllers supported by this driver: |
| 42 | |
| 43 | LSI 3ware 9750 6Gb/s SAS/SATA-RAID |
| 44 | |
| 45 | Bugs/Comments/Suggestions should be mailed to: |
| 46 | linuxraid@lsi.com |
| 47 | |
| 48 | For more information, goto: |
| 49 | http://www.lsi.com |
| 50 | |
| 51 | History |
| 52 | ------- |
| 53 | 3.26.02.000 - Initial driver release. |
| 54 | */ |
| 55 | |
| 56 | #include <linux/module.h> |
| 57 | #include <linux/reboot.h> |
| 58 | #include <linux/spinlock.h> |
| 59 | #include <linux/interrupt.h> |
| 60 | #include <linux/moduleparam.h> |
| 61 | #include <linux/errno.h> |
| 62 | #include <linux/types.h> |
| 63 | #include <linux/delay.h> |
| 64 | #include <linux/pci.h> |
| 65 | #include <linux/time.h> |
| 66 | #include <linux/mutex.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 67 | #include <linux/slab.h> |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 68 | #include <asm/io.h> |
| 69 | #include <asm/irq.h> |
| 70 | #include <asm/uaccess.h> |
| 71 | #include <scsi/scsi.h> |
| 72 | #include <scsi/scsi_host.h> |
| 73 | #include <scsi/scsi_tcq.h> |
| 74 | #include <scsi/scsi_cmnd.h> |
| 75 | #include "3w-sas.h" |
| 76 | |
| 77 | /* Globals */ |
| 78 | #define TW_DRIVER_VERSION "3.26.02.000" |
Arnd Bergmann | c45d15d | 2010-06-02 14:28:52 +0200 | [diff] [blame] | 79 | static DEFINE_MUTEX(twl_chrdev_mutex); |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 80 | static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT]; |
| 81 | static unsigned int twl_device_extension_count; |
| 82 | static int twl_major = -1; |
| 83 | extern struct timezone sys_tz; |
| 84 | |
| 85 | /* Module parameters */ |
| 86 | MODULE_AUTHOR ("LSI"); |
| 87 | MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver"); |
| 88 | MODULE_LICENSE("GPL"); |
| 89 | MODULE_VERSION(TW_DRIVER_VERSION); |
| 90 | |
| 91 | static int use_msi; |
| 92 | module_param(use_msi, int, S_IRUGO); |
| 93 | MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0"); |
| 94 | |
| 95 | /* Function prototypes */ |
| 96 | static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset); |
| 97 | |
| 98 | /* Functions */ |
| 99 | |
| 100 | /* This function returns AENs through sysfs */ |
Chris Wright | 2c3c8be | 2010-05-12 18:28:57 -0700 | [diff] [blame] | 101 | static ssize_t twl_sysfs_aen_read(struct file *filp, struct kobject *kobj, |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 102 | struct bin_attribute *bin_attr, |
| 103 | char *outbuf, loff_t offset, size_t count) |
| 104 | { |
| 105 | struct device *dev = container_of(kobj, struct device, kobj); |
| 106 | struct Scsi_Host *shost = class_to_shost(dev); |
| 107 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; |
| 108 | unsigned long flags = 0; |
| 109 | ssize_t ret; |
| 110 | |
| 111 | if (!capable(CAP_SYS_ADMIN)) |
| 112 | return -EACCES; |
| 113 | |
| 114 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 115 | ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH); |
| 116 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 117 | |
| 118 | return ret; |
| 119 | } /* End twl_sysfs_aen_read() */ |
| 120 | |
| 121 | /* aen_read sysfs attribute initializer */ |
| 122 | static struct bin_attribute twl_sysfs_aen_read_attr = { |
| 123 | .attr = { |
| 124 | .name = "3ware_aen_read", |
| 125 | .mode = S_IRUSR, |
| 126 | }, |
| 127 | .size = 0, |
| 128 | .read = twl_sysfs_aen_read |
| 129 | }; |
| 130 | |
| 131 | /* This function returns driver compatibility info through sysfs */ |
Chris Wright | 2c3c8be | 2010-05-12 18:28:57 -0700 | [diff] [blame] | 132 | static ssize_t twl_sysfs_compat_info(struct file *filp, struct kobject *kobj, |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 133 | struct bin_attribute *bin_attr, |
| 134 | char *outbuf, loff_t offset, size_t count) |
| 135 | { |
| 136 | struct device *dev = container_of(kobj, struct device, kobj); |
| 137 | struct Scsi_Host *shost = class_to_shost(dev); |
| 138 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; |
| 139 | unsigned long flags = 0; |
| 140 | ssize_t ret; |
| 141 | |
| 142 | if (!capable(CAP_SYS_ADMIN)) |
| 143 | return -EACCES; |
| 144 | |
| 145 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 146 | ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); |
| 147 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 148 | |
| 149 | return ret; |
| 150 | } /* End twl_sysfs_compat_info() */ |
| 151 | |
| 152 | /* compat_info sysfs attribute initializer */ |
| 153 | static struct bin_attribute twl_sysfs_compat_info_attr = { |
| 154 | .attr = { |
| 155 | .name = "3ware_compat_info", |
| 156 | .mode = S_IRUSR, |
| 157 | }, |
| 158 | .size = 0, |
| 159 | .read = twl_sysfs_compat_info |
| 160 | }; |
| 161 | |
| 162 | /* Show some statistics about the card */ |
| 163 | static ssize_t twl_show_stats(struct device *dev, |
| 164 | struct device_attribute *attr, char *buf) |
| 165 | { |
| 166 | struct Scsi_Host *host = class_to_shost(dev); |
| 167 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| 168 | unsigned long flags = 0; |
| 169 | ssize_t len; |
| 170 | |
| 171 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 172 | len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n" |
| 173 | "Current commands posted: %4d\n" |
| 174 | "Max commands posted: %4d\n" |
| 175 | "Last sgl length: %4d\n" |
| 176 | "Max sgl length: %4d\n" |
| 177 | "Last sector count: %4d\n" |
| 178 | "Max sector count: %4d\n" |
| 179 | "SCSI Host Resets: %4d\n" |
| 180 | "AEN's: %4d\n", |
| 181 | TW_DRIVER_VERSION, |
| 182 | tw_dev->posted_request_count, |
| 183 | tw_dev->max_posted_request_count, |
| 184 | tw_dev->sgl_entries, |
| 185 | tw_dev->max_sgl_entries, |
| 186 | tw_dev->sector_count, |
| 187 | tw_dev->max_sector_count, |
| 188 | tw_dev->num_resets, |
| 189 | tw_dev->aen_count); |
| 190 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 191 | return len; |
| 192 | } /* End twl_show_stats() */ |
| 193 | |
| 194 | /* This function will set a devices queue depth */ |
| 195 | static int twl_change_queue_depth(struct scsi_device *sdev, int queue_depth, |
| 196 | int reason) |
| 197 | { |
| 198 | if (reason != SCSI_QDEPTH_DEFAULT) |
| 199 | return -EOPNOTSUPP; |
| 200 | |
| 201 | if (queue_depth > TW_Q_LENGTH-2) |
| 202 | queue_depth = TW_Q_LENGTH-2; |
| 203 | scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); |
| 204 | return queue_depth; |
| 205 | } /* End twl_change_queue_depth() */ |
| 206 | |
| 207 | /* stats sysfs attribute initializer */ |
| 208 | static struct device_attribute twl_host_stats_attr = { |
| 209 | .attr = { |
| 210 | .name = "3ware_stats", |
| 211 | .mode = S_IRUGO, |
| 212 | }, |
| 213 | .show = twl_show_stats |
| 214 | }; |
| 215 | |
| 216 | /* Host attributes initializer */ |
| 217 | static struct device_attribute *twl_host_attrs[] = { |
| 218 | &twl_host_stats_attr, |
| 219 | NULL, |
| 220 | }; |
| 221 | |
| 222 | /* This function will look up an AEN severity string */ |
| 223 | static char *twl_aen_severity_lookup(unsigned char severity_code) |
| 224 | { |
| 225 | char *retval = NULL; |
| 226 | |
| 227 | if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) || |
| 228 | (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG)) |
| 229 | goto out; |
| 230 | |
| 231 | retval = twl_aen_severity_table[severity_code]; |
| 232 | out: |
| 233 | return retval; |
| 234 | } /* End twl_aen_severity_lookup() */ |
| 235 | |
| 236 | /* This function will queue an event */ |
| 237 | static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header) |
| 238 | { |
| 239 | u32 local_time; |
| 240 | struct timeval time; |
| 241 | TW_Event *event; |
| 242 | unsigned short aen; |
| 243 | char host[16]; |
| 244 | char *error_str; |
| 245 | |
| 246 | tw_dev->aen_count++; |
| 247 | |
| 248 | /* Fill out event info */ |
| 249 | event = tw_dev->event_queue[tw_dev->error_index]; |
| 250 | |
| 251 | host[0] = '\0'; |
| 252 | if (tw_dev->host) |
| 253 | sprintf(host, " scsi%d:", tw_dev->host->host_no); |
| 254 | |
| 255 | aen = le16_to_cpu(header->status_block.error); |
| 256 | memset(event, 0, sizeof(TW_Event)); |
| 257 | |
| 258 | event->severity = TW_SEV_OUT(header->status_block.severity__reserved); |
| 259 | do_gettimeofday(&time); |
| 260 | local_time = (u32)(time.tv_sec - (sys_tz.tz_minuteswest * 60)); |
| 261 | event->time_stamp_sec = local_time; |
| 262 | event->aen_code = aen; |
| 263 | event->retrieved = TW_AEN_NOT_RETRIEVED; |
| 264 | event->sequence_id = tw_dev->error_sequence_id; |
| 265 | tw_dev->error_sequence_id++; |
| 266 | |
| 267 | /* Check for embedded error string */ |
| 268 | error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]); |
| 269 | |
| 270 | header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0'; |
| 271 | event->parameter_len = strlen(header->err_specific_desc); |
| 272 | memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str)); |
| 273 | if (event->severity != TW_AEN_SEVERITY_DEBUG) |
| 274 | printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", |
| 275 | host, |
| 276 | twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)), |
| 277 | TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str, |
| 278 | header->err_specific_desc); |
| 279 | else |
| 280 | tw_dev->aen_count--; |
| 281 | |
| 282 | tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH; |
| 283 | } /* End twl_aen_queue_event() */ |
| 284 | |
| 285 | /* This function will attempt to post a command packet to the board */ |
| 286 | static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id) |
| 287 | { |
| 288 | dma_addr_t command_que_value; |
| 289 | |
| 290 | command_que_value = tw_dev->command_packet_phys[request_id]; |
| 291 | command_que_value += TW_COMMAND_OFFSET; |
| 292 | |
| 293 | /* First write upper 4 bytes */ |
| 294 | writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev)); |
| 295 | /* Then the lower 4 bytes */ |
| 296 | writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev)); |
| 297 | |
| 298 | tw_dev->state[request_id] = TW_S_POSTED; |
| 299 | tw_dev->posted_request_count++; |
| 300 | if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) |
| 301 | tw_dev->max_posted_request_count = tw_dev->posted_request_count; |
| 302 | |
| 303 | return 0; |
| 304 | } /* End twl_post_command_packet() */ |
| 305 | |
| 306 | /* This function will perform a pci-dma mapping for a scatter gather list */ |
| 307 | static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id) |
| 308 | { |
| 309 | int use_sg; |
| 310 | struct scsi_cmnd *cmd = tw_dev->srb[request_id]; |
| 311 | |
| 312 | use_sg = scsi_dma_map(cmd); |
| 313 | if (!use_sg) |
| 314 | return 0; |
| 315 | else if (use_sg < 0) { |
| 316 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list"); |
| 317 | return 0; |
| 318 | } |
| 319 | |
| 320 | cmd->SCp.phase = TW_PHASE_SGLIST; |
| 321 | cmd->SCp.have_data_in = use_sg; |
| 322 | |
| 323 | return use_sg; |
| 324 | } /* End twl_map_scsi_sg_data() */ |
| 325 | |
| 326 | /* This function hands scsi cdb's to the firmware */ |
| 327 | static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg) |
| 328 | { |
| 329 | TW_Command_Full *full_command_packet; |
| 330 | TW_Command_Apache *command_packet; |
| 331 | int i, sg_count; |
| 332 | struct scsi_cmnd *srb = NULL; |
| 333 | struct scatterlist *sglist = NULL, *sg; |
| 334 | int retval = 1; |
| 335 | |
| 336 | if (tw_dev->srb[request_id]) { |
| 337 | srb = tw_dev->srb[request_id]; |
| 338 | if (scsi_sglist(srb)) |
| 339 | sglist = scsi_sglist(srb); |
| 340 | } |
| 341 | |
| 342 | /* Initialize command packet */ |
| 343 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 344 | full_command_packet->header.header_desc.size_header = 128; |
| 345 | full_command_packet->header.status_block.error = 0; |
| 346 | full_command_packet->header.status_block.severity__reserved = 0; |
| 347 | |
| 348 | command_packet = &full_command_packet->command.newcommand; |
| 349 | command_packet->status = 0; |
| 350 | command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI); |
| 351 | |
| 352 | /* We forced 16 byte cdb use earlier */ |
| 353 | if (!cdb) |
| 354 | memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN); |
| 355 | else |
| 356 | memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN); |
| 357 | |
| 358 | if (srb) { |
| 359 | command_packet->unit = srb->device->id; |
| 360 | command_packet->request_id__lunl = |
| 361 | cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id)); |
| 362 | } else { |
| 363 | command_packet->request_id__lunl = |
| 364 | cpu_to_le16(TW_REQ_LUN_IN(0, request_id)); |
| 365 | command_packet->unit = 0; |
| 366 | } |
| 367 | |
| 368 | command_packet->sgl_offset = 16; |
| 369 | |
| 370 | if (!sglistarg) { |
| 371 | /* Map sglist from scsi layer to cmd packet */ |
| 372 | if (scsi_sg_count(srb)) { |
| 373 | sg_count = twl_map_scsi_sg_data(tw_dev, request_id); |
| 374 | if (sg_count == 0) |
| 375 | goto out; |
| 376 | |
| 377 | scsi_for_each_sg(srb, sg, sg_count, i) { |
| 378 | command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg)); |
| 379 | command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg)); |
| 380 | } |
| 381 | command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id]))); |
| 382 | } |
| 383 | } else { |
| 384 | /* Internal cdb post */ |
| 385 | for (i = 0; i < use_sg; i++) { |
| 386 | command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address); |
| 387 | command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length); |
| 388 | } |
| 389 | command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg)); |
| 390 | } |
| 391 | |
| 392 | /* Update some stats */ |
| 393 | if (srb) { |
| 394 | tw_dev->sector_count = scsi_bufflen(srb) / 512; |
| 395 | if (tw_dev->sector_count > tw_dev->max_sector_count) |
| 396 | tw_dev->max_sector_count = tw_dev->sector_count; |
| 397 | tw_dev->sgl_entries = scsi_sg_count(srb); |
| 398 | if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) |
| 399 | tw_dev->max_sgl_entries = tw_dev->sgl_entries; |
| 400 | } |
| 401 | |
| 402 | /* Now post the command to the board */ |
| 403 | retval = twl_post_command_packet(tw_dev, request_id); |
| 404 | |
| 405 | out: |
| 406 | return retval; |
| 407 | } /* End twl_scsiop_execute_scsi() */ |
| 408 | |
| 409 | /* This function will read the aen queue from the isr */ |
| 410 | static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) |
| 411 | { |
| 412 | char cdb[TW_MAX_CDB_LEN]; |
| 413 | TW_SG_Entry_ISO sglist[1]; |
| 414 | TW_Command_Full *full_command_packet; |
| 415 | int retval = 1; |
| 416 | |
| 417 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 418 | memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| 419 | |
| 420 | /* Initialize cdb */ |
| 421 | memset(&cdb, 0, TW_MAX_CDB_LEN); |
| 422 | cdb[0] = REQUEST_SENSE; /* opcode */ |
| 423 | cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ |
| 424 | |
| 425 | /* Initialize sglist */ |
| 426 | memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); |
| 427 | sglist[0].length = TW_SECTOR_SIZE; |
| 428 | sglist[0].address = tw_dev->generic_buffer_phys[request_id]; |
| 429 | |
| 430 | /* Mark internal command */ |
| 431 | tw_dev->srb[request_id] = NULL; |
| 432 | |
| 433 | /* Now post the command packet */ |
| 434 | if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { |
| 435 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue"); |
| 436 | goto out; |
| 437 | } |
| 438 | retval = 0; |
| 439 | out: |
| 440 | return retval; |
| 441 | } /* End twl_aen_read_queue() */ |
| 442 | |
| 443 | /* This function will sync firmware time with the host time */ |
| 444 | static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id) |
| 445 | { |
| 446 | u32 schedulertime; |
| 447 | struct timeval utc; |
| 448 | TW_Command_Full *full_command_packet; |
| 449 | TW_Command *command_packet; |
| 450 | TW_Param_Apache *param; |
| 451 | u32 local_time; |
| 452 | |
| 453 | /* Fill out the command packet */ |
| 454 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 455 | memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| 456 | command_packet = &full_command_packet->command.oldcommand; |
| 457 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); |
| 458 | command_packet->request_id = request_id; |
| 459 | command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); |
| 460 | command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); |
| 461 | command_packet->size = TW_COMMAND_SIZE; |
| 462 | command_packet->byte6_offset.parameter_count = cpu_to_le16(1); |
| 463 | |
| 464 | /* Setup the param */ |
| 465 | param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; |
| 466 | memset(param, 0, TW_SECTOR_SIZE); |
| 467 | param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */ |
| 468 | param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */ |
| 469 | param->parameter_size_bytes = cpu_to_le16(4); |
| 470 | |
| 471 | /* Convert system time in UTC to local time seconds since last |
| 472 | Sunday 12:00AM */ |
| 473 | do_gettimeofday(&utc); |
| 474 | local_time = (u32)(utc.tv_sec - (sys_tz.tz_minuteswest * 60)); |
| 475 | schedulertime = local_time - (3 * 86400); |
| 476 | schedulertime = cpu_to_le32(schedulertime % 604800); |
| 477 | |
| 478 | memcpy(param->data, &schedulertime, sizeof(u32)); |
| 479 | |
| 480 | /* Mark internal command */ |
| 481 | tw_dev->srb[request_id] = NULL; |
| 482 | |
| 483 | /* Now post the command */ |
| 484 | twl_post_command_packet(tw_dev, request_id); |
| 485 | } /* End twl_aen_sync_time() */ |
| 486 | |
| 487 | /* This function will assign an available request id */ |
| 488 | static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id) |
| 489 | { |
| 490 | *request_id = tw_dev->free_queue[tw_dev->free_head]; |
| 491 | tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; |
| 492 | tw_dev->state[*request_id] = TW_S_STARTED; |
| 493 | } /* End twl_get_request_id() */ |
| 494 | |
| 495 | /* This function will free a request id */ |
| 496 | static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id) |
| 497 | { |
| 498 | tw_dev->free_queue[tw_dev->free_tail] = request_id; |
| 499 | tw_dev->state[request_id] = TW_S_FINISHED; |
| 500 | tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; |
| 501 | } /* End twl_free_request_id() */ |
| 502 | |
| 503 | /* This function will complete an aen request from the isr */ |
| 504 | static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id) |
| 505 | { |
| 506 | TW_Command_Full *full_command_packet; |
| 507 | TW_Command *command_packet; |
| 508 | TW_Command_Apache_Header *header; |
| 509 | unsigned short aen; |
| 510 | int retval = 1; |
| 511 | |
| 512 | header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; |
| 513 | tw_dev->posted_request_count--; |
| 514 | aen = le16_to_cpu(header->status_block.error); |
| 515 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 516 | command_packet = &full_command_packet->command.oldcommand; |
| 517 | |
| 518 | /* First check for internal completion of set param for time sync */ |
| 519 | if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) { |
| 520 | /* Keep reading the queue in case there are more aen's */ |
| 521 | if (twl_aen_read_queue(tw_dev, request_id)) |
| 522 | goto out2; |
| 523 | else { |
| 524 | retval = 0; |
| 525 | goto out; |
| 526 | } |
| 527 | } |
| 528 | |
| 529 | switch (aen) { |
| 530 | case TW_AEN_QUEUE_EMPTY: |
| 531 | /* Quit reading the queue if this is the last one */ |
| 532 | break; |
| 533 | case TW_AEN_SYNC_TIME_WITH_HOST: |
| 534 | twl_aen_sync_time(tw_dev, request_id); |
| 535 | retval = 0; |
| 536 | goto out; |
| 537 | default: |
| 538 | twl_aen_queue_event(tw_dev, header); |
| 539 | |
| 540 | /* If there are more aen's, keep reading the queue */ |
| 541 | if (twl_aen_read_queue(tw_dev, request_id)) |
| 542 | goto out2; |
| 543 | else { |
| 544 | retval = 0; |
| 545 | goto out; |
| 546 | } |
| 547 | } |
| 548 | retval = 0; |
| 549 | out2: |
| 550 | tw_dev->state[request_id] = TW_S_COMPLETED; |
| 551 | twl_free_request_id(tw_dev, request_id); |
| 552 | clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); |
| 553 | out: |
| 554 | return retval; |
| 555 | } /* End twl_aen_complete() */ |
| 556 | |
| 557 | /* This function will poll for a response */ |
| 558 | static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds) |
| 559 | { |
| 560 | unsigned long before; |
| 561 | dma_addr_t mfa; |
| 562 | u32 regh, regl; |
| 563 | u32 response; |
| 564 | int retval = 1; |
| 565 | int found = 0; |
| 566 | |
| 567 | before = jiffies; |
| 568 | |
| 569 | while (!found) { |
| 570 | if (sizeof(dma_addr_t) > 4) { |
| 571 | regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); |
| 572 | regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 573 | mfa = ((u64)regh << 32) | regl; |
| 574 | } else |
| 575 | mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 576 | |
| 577 | response = (u32)mfa; |
| 578 | |
| 579 | if (TW_RESID_OUT(response) == request_id) |
| 580 | found = 1; |
| 581 | |
| 582 | if (time_after(jiffies, before + HZ * seconds)) |
| 583 | goto out; |
| 584 | |
| 585 | msleep(50); |
| 586 | } |
| 587 | retval = 0; |
| 588 | out: |
| 589 | return retval; |
| 590 | } /* End twl_poll_response() */ |
| 591 | |
| 592 | /* This function will drain the aen queue */ |
| 593 | static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset) |
| 594 | { |
| 595 | int request_id = 0; |
| 596 | char cdb[TW_MAX_CDB_LEN]; |
| 597 | TW_SG_Entry_ISO sglist[1]; |
| 598 | int finished = 0, count = 0; |
| 599 | TW_Command_Full *full_command_packet; |
| 600 | TW_Command_Apache_Header *header; |
| 601 | unsigned short aen; |
| 602 | int first_reset = 0, queue = 0, retval = 1; |
| 603 | |
| 604 | if (no_check_reset) |
| 605 | first_reset = 0; |
| 606 | else |
| 607 | first_reset = 1; |
| 608 | |
| 609 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 610 | memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| 611 | |
| 612 | /* Initialize cdb */ |
| 613 | memset(&cdb, 0, TW_MAX_CDB_LEN); |
| 614 | cdb[0] = REQUEST_SENSE; /* opcode */ |
| 615 | cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ |
| 616 | |
| 617 | /* Initialize sglist */ |
| 618 | memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); |
| 619 | sglist[0].length = TW_SECTOR_SIZE; |
| 620 | sglist[0].address = tw_dev->generic_buffer_phys[request_id]; |
| 621 | |
| 622 | /* Mark internal command */ |
| 623 | tw_dev->srb[request_id] = NULL; |
| 624 | |
| 625 | do { |
| 626 | /* Send command to the board */ |
| 627 | if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { |
| 628 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense"); |
| 629 | goto out; |
| 630 | } |
| 631 | |
| 632 | /* Now poll for completion */ |
| 633 | if (twl_poll_response(tw_dev, request_id, 30)) { |
| 634 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue"); |
| 635 | tw_dev->posted_request_count--; |
| 636 | goto out; |
| 637 | } |
| 638 | |
| 639 | tw_dev->posted_request_count--; |
| 640 | header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; |
| 641 | aen = le16_to_cpu(header->status_block.error); |
| 642 | queue = 0; |
| 643 | count++; |
| 644 | |
| 645 | switch (aen) { |
| 646 | case TW_AEN_QUEUE_EMPTY: |
| 647 | if (first_reset != 1) |
| 648 | goto out; |
| 649 | else |
| 650 | finished = 1; |
| 651 | break; |
| 652 | case TW_AEN_SOFT_RESET: |
| 653 | if (first_reset == 0) |
| 654 | first_reset = 1; |
| 655 | else |
| 656 | queue = 1; |
| 657 | break; |
| 658 | case TW_AEN_SYNC_TIME_WITH_HOST: |
| 659 | break; |
| 660 | default: |
| 661 | queue = 1; |
| 662 | } |
| 663 | |
| 664 | /* Now queue an event info */ |
| 665 | if (queue) |
| 666 | twl_aen_queue_event(tw_dev, header); |
| 667 | } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN)); |
| 668 | |
| 669 | if (count == TW_MAX_AEN_DRAIN) |
| 670 | goto out; |
| 671 | |
| 672 | retval = 0; |
| 673 | out: |
| 674 | tw_dev->state[request_id] = TW_S_INITIAL; |
| 675 | return retval; |
| 676 | } /* End twl_aen_drain_queue() */ |
| 677 | |
| 678 | /* This function will allocate memory and check if it is correctly aligned */ |
| 679 | static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) |
| 680 | { |
| 681 | int i; |
| 682 | dma_addr_t dma_handle; |
| 683 | unsigned long *cpu_addr; |
| 684 | int retval = 1; |
| 685 | |
| 686 | cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle); |
| 687 | if (!cpu_addr) { |
| 688 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); |
| 689 | goto out; |
| 690 | } |
| 691 | |
| 692 | memset(cpu_addr, 0, size*TW_Q_LENGTH); |
| 693 | |
| 694 | for (i = 0; i < TW_Q_LENGTH; i++) { |
| 695 | switch(which) { |
| 696 | case 0: |
| 697 | tw_dev->command_packet_phys[i] = dma_handle+(i*size); |
| 698 | tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size)); |
| 699 | break; |
| 700 | case 1: |
| 701 | tw_dev->generic_buffer_phys[i] = dma_handle+(i*size); |
| 702 | tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); |
| 703 | break; |
| 704 | case 2: |
| 705 | tw_dev->sense_buffer_phys[i] = dma_handle+(i*size); |
| 706 | tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size)); |
| 707 | break; |
| 708 | } |
| 709 | } |
| 710 | retval = 0; |
| 711 | out: |
| 712 | return retval; |
| 713 | } /* End twl_allocate_memory() */ |
| 714 | |
| 715 | /* This function will load the request id and various sgls for ioctls */ |
| 716 | static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length) |
| 717 | { |
| 718 | TW_Command *oldcommand; |
| 719 | TW_Command_Apache *newcommand; |
| 720 | TW_SG_Entry_ISO *sgl; |
| 721 | unsigned int pae = 0; |
| 722 | |
| 723 | if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4)) |
| 724 | pae = 1; |
| 725 | |
| 726 | if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) { |
| 727 | newcommand = &full_command_packet->command.newcommand; |
| 728 | newcommand->request_id__lunl = |
| 729 | cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); |
| 730 | if (length) { |
| 731 | newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); |
| 732 | newcommand->sg_list[0].length = TW_CPU_TO_SGL(length); |
| 733 | } |
| 734 | newcommand->sgl_entries__lunh = |
| 735 | cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); |
| 736 | } else { |
| 737 | oldcommand = &full_command_packet->command.oldcommand; |
| 738 | oldcommand->request_id = request_id; |
| 739 | |
| 740 | if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) { |
| 741 | /* Load the sg list */ |
| 742 | sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0)); |
| 743 | sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); |
| 744 | sgl->length = TW_CPU_TO_SGL(length); |
| 745 | oldcommand->size += pae; |
| 746 | oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0; |
| 747 | } |
| 748 | } |
| 749 | } /* End twl_load_sgl() */ |
| 750 | |
| 751 | /* This function handles ioctl for the character device |
| 752 | This interface is used by smartmontools open source software */ |
Arnd Bergmann | f4927c4 | 2010-04-27 00:24:01 +0200 | [diff] [blame] | 753 | static long twl_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 754 | { |
| 755 | long timeout; |
| 756 | unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0; |
| 757 | dma_addr_t dma_handle; |
| 758 | int request_id = 0; |
| 759 | TW_Ioctl_Driver_Command driver_command; |
Arnd Bergmann | f4927c4 | 2010-04-27 00:24:01 +0200 | [diff] [blame] | 760 | struct inode *inode = file->f_dentry->d_inode; |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 761 | TW_Ioctl_Buf_Apache *tw_ioctl; |
| 762 | TW_Command_Full *full_command_packet; |
| 763 | TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)]; |
| 764 | int retval = -EFAULT; |
| 765 | void __user *argp = (void __user *)arg; |
| 766 | |
Arnd Bergmann | c45d15d | 2010-06-02 14:28:52 +0200 | [diff] [blame] | 767 | mutex_lock(&twl_chrdev_mutex); |
Arnd Bergmann | f4927c4 | 2010-04-27 00:24:01 +0200 | [diff] [blame] | 768 | |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 769 | /* Only let one of these through at a time */ |
| 770 | if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { |
| 771 | retval = -EINTR; |
| 772 | goto out; |
| 773 | } |
| 774 | |
| 775 | /* First copy down the driver command */ |
| 776 | if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command))) |
| 777 | goto out2; |
| 778 | |
| 779 | /* Check data buffer size */ |
| 780 | if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) { |
| 781 | retval = -EINVAL; |
| 782 | goto out2; |
| 783 | } |
| 784 | |
| 785 | /* Hardware can only do multiple of 512 byte transfers */ |
| 786 | data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511; |
| 787 | |
| 788 | /* Now allocate ioctl buf memory */ |
| 789 | cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL); |
| 790 | if (!cpu_addr) { |
| 791 | retval = -ENOMEM; |
| 792 | goto out2; |
| 793 | } |
| 794 | |
| 795 | tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr; |
| 796 | |
| 797 | /* Now copy down the entire ioctl */ |
| 798 | if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1)) |
| 799 | goto out3; |
| 800 | |
| 801 | /* See which ioctl we are doing */ |
| 802 | switch (cmd) { |
| 803 | case TW_IOCTL_FIRMWARE_PASS_THROUGH: |
| 804 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 805 | twl_get_request_id(tw_dev, &request_id); |
| 806 | |
| 807 | /* Flag internal command */ |
| 808 | tw_dev->srb[request_id] = NULL; |
| 809 | |
| 810 | /* Flag chrdev ioctl */ |
| 811 | tw_dev->chrdev_request_id = request_id; |
| 812 | |
| 813 | full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command; |
| 814 | |
| 815 | /* Load request id and sglist for both command types */ |
| 816 | twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted); |
| 817 | |
| 818 | memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full)); |
| 819 | |
| 820 | /* Now post the command packet to the controller */ |
| 821 | twl_post_command_packet(tw_dev, request_id); |
| 822 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 823 | |
| 824 | timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; |
| 825 | |
| 826 | /* Now wait for command to complete */ |
| 827 | timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); |
| 828 | |
| 829 | /* We timed out, and didn't get an interrupt */ |
| 830 | if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { |
| 831 | /* Now we need to reset the board */ |
| 832 | printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", |
| 833 | tw_dev->host->host_no, TW_DRIVER, 0x6, |
| 834 | cmd); |
| 835 | retval = -EIO; |
| 836 | twl_reset_device_extension(tw_dev, 1); |
| 837 | goto out3; |
| 838 | } |
| 839 | |
| 840 | /* Now copy in the command packet response */ |
| 841 | memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full)); |
| 842 | |
| 843 | /* Now complete the io */ |
| 844 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 845 | tw_dev->posted_request_count--; |
| 846 | tw_dev->state[request_id] = TW_S_COMPLETED; |
| 847 | twl_free_request_id(tw_dev, request_id); |
| 848 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 849 | break; |
| 850 | default: |
| 851 | retval = -ENOTTY; |
| 852 | goto out3; |
| 853 | } |
| 854 | |
| 855 | /* Now copy the entire response to userspace */ |
| 856 | if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0) |
| 857 | retval = 0; |
| 858 | out3: |
| 859 | /* Now free ioctl buf memory */ |
| 860 | dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle); |
| 861 | out2: |
| 862 | mutex_unlock(&tw_dev->ioctl_lock); |
| 863 | out: |
Arnd Bergmann | c45d15d | 2010-06-02 14:28:52 +0200 | [diff] [blame] | 864 | mutex_unlock(&twl_chrdev_mutex); |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 865 | return retval; |
| 866 | } /* End twl_chrdev_ioctl() */ |
| 867 | |
| 868 | /* This function handles open for the character device */ |
| 869 | static int twl_chrdev_open(struct inode *inode, struct file *file) |
| 870 | { |
| 871 | unsigned int minor_number; |
| 872 | int retval = -ENODEV; |
| 873 | |
| 874 | if (!capable(CAP_SYS_ADMIN)) { |
| 875 | retval = -EACCES; |
| 876 | goto out; |
| 877 | } |
| 878 | |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 879 | minor_number = iminor(inode); |
| 880 | if (minor_number >= twl_device_extension_count) |
| 881 | goto out; |
| 882 | retval = 0; |
| 883 | out: |
| 884 | return retval; |
| 885 | } /* End twl_chrdev_open() */ |
| 886 | |
| 887 | /* File operations struct for character device */ |
| 888 | static const struct file_operations twl_fops = { |
| 889 | .owner = THIS_MODULE, |
Arnd Bergmann | f4927c4 | 2010-04-27 00:24:01 +0200 | [diff] [blame] | 890 | .unlocked_ioctl = twl_chrdev_ioctl, |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 891 | .open = twl_chrdev_open, |
Arnd Bergmann | 6038f37 | 2010-08-15 18:52:59 +0200 | [diff] [blame] | 892 | .release = NULL, |
| 893 | .llseek = noop_llseek, |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 894 | }; |
| 895 | |
| 896 | /* This function passes sense data from firmware to scsi layer */ |
| 897 | static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host) |
| 898 | { |
| 899 | TW_Command_Apache_Header *header; |
| 900 | TW_Command_Full *full_command_packet; |
| 901 | unsigned short error; |
| 902 | char *error_str; |
| 903 | int retval = 1; |
| 904 | |
| 905 | header = tw_dev->sense_buffer_virt[i]; |
| 906 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 907 | |
| 908 | /* Get embedded firmware error string */ |
| 909 | error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]); |
| 910 | |
| 911 | /* Don't print error for Logical unit not supported during rollcall */ |
| 912 | error = le16_to_cpu(header->status_block.error); |
| 913 | if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) { |
| 914 | if (print_host) |
| 915 | printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", |
| 916 | tw_dev->host->host_no, |
| 917 | TW_MESSAGE_SOURCE_CONTROLLER_ERROR, |
| 918 | header->status_block.error, |
| 919 | error_str, |
| 920 | header->err_specific_desc); |
| 921 | else |
| 922 | printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n", |
| 923 | TW_MESSAGE_SOURCE_CONTROLLER_ERROR, |
| 924 | header->status_block.error, |
| 925 | error_str, |
| 926 | header->err_specific_desc); |
| 927 | } |
| 928 | |
| 929 | if (copy_sense) { |
| 930 | memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH); |
| 931 | tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1); |
| 932 | goto out; |
| 933 | } |
| 934 | out: |
| 935 | return retval; |
| 936 | } /* End twl_fill_sense() */ |
| 937 | |
| 938 | /* This function will free up device extension resources */ |
| 939 | static void twl_free_device_extension(TW_Device_Extension *tw_dev) |
| 940 | { |
| 941 | if (tw_dev->command_packet_virt[0]) |
| 942 | pci_free_consistent(tw_dev->tw_pci_dev, |
| 943 | sizeof(TW_Command_Full)*TW_Q_LENGTH, |
| 944 | tw_dev->command_packet_virt[0], |
| 945 | tw_dev->command_packet_phys[0]); |
| 946 | |
| 947 | if (tw_dev->generic_buffer_virt[0]) |
| 948 | pci_free_consistent(tw_dev->tw_pci_dev, |
| 949 | TW_SECTOR_SIZE*TW_Q_LENGTH, |
| 950 | tw_dev->generic_buffer_virt[0], |
| 951 | tw_dev->generic_buffer_phys[0]); |
| 952 | |
| 953 | if (tw_dev->sense_buffer_virt[0]) |
| 954 | pci_free_consistent(tw_dev->tw_pci_dev, |
| 955 | sizeof(TW_Command_Apache_Header)* |
| 956 | TW_Q_LENGTH, |
| 957 | tw_dev->sense_buffer_virt[0], |
| 958 | tw_dev->sense_buffer_phys[0]); |
| 959 | |
| 960 | kfree(tw_dev->event_queue[0]); |
| 961 | } /* End twl_free_device_extension() */ |
| 962 | |
| 963 | /* This function will get parameter table entries from the firmware */ |
| 964 | static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) |
| 965 | { |
| 966 | TW_Command_Full *full_command_packet; |
| 967 | TW_Command *command_packet; |
| 968 | TW_Param_Apache *param; |
| 969 | void *retval = NULL; |
| 970 | |
| 971 | /* Setup the command packet */ |
| 972 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 973 | memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| 974 | command_packet = &full_command_packet->command.oldcommand; |
| 975 | |
| 976 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); |
| 977 | command_packet->size = TW_COMMAND_SIZE; |
| 978 | command_packet->request_id = request_id; |
| 979 | command_packet->byte6_offset.block_count = cpu_to_le16(1); |
| 980 | |
| 981 | /* Now setup the param */ |
| 982 | param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; |
| 983 | memset(param, 0, TW_SECTOR_SIZE); |
| 984 | param->table_id = cpu_to_le16(table_id | 0x8000); |
| 985 | param->parameter_id = cpu_to_le16(parameter_id); |
| 986 | param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes); |
| 987 | |
| 988 | command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); |
| 989 | command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); |
| 990 | |
| 991 | /* Post the command packet to the board */ |
| 992 | twl_post_command_packet(tw_dev, request_id); |
| 993 | |
| 994 | /* Poll for completion */ |
| 995 | if (twl_poll_response(tw_dev, request_id, 30)) |
| 996 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param") |
| 997 | else |
| 998 | retval = (void *)&(param->data[0]); |
| 999 | |
| 1000 | tw_dev->posted_request_count--; |
| 1001 | tw_dev->state[request_id] = TW_S_INITIAL; |
| 1002 | |
| 1003 | return retval; |
| 1004 | } /* End twl_get_param() */ |
| 1005 | |
| 1006 | /* This function will send an initconnection command to controller */ |
| 1007 | static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits, |
| 1008 | u32 set_features, unsigned short current_fw_srl, |
| 1009 | unsigned short current_fw_arch_id, |
| 1010 | unsigned short current_fw_branch, |
| 1011 | unsigned short current_fw_build, |
| 1012 | unsigned short *fw_on_ctlr_srl, |
| 1013 | unsigned short *fw_on_ctlr_arch_id, |
| 1014 | unsigned short *fw_on_ctlr_branch, |
| 1015 | unsigned short *fw_on_ctlr_build, |
| 1016 | u32 *init_connect_result) |
| 1017 | { |
| 1018 | TW_Command_Full *full_command_packet; |
| 1019 | TW_Initconnect *tw_initconnect; |
| 1020 | int request_id = 0, retval = 1; |
| 1021 | |
| 1022 | /* Initialize InitConnection command packet */ |
| 1023 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 1024 | memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| 1025 | full_command_packet->header.header_desc.size_header = 128; |
| 1026 | |
| 1027 | tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand; |
| 1028 | tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION); |
| 1029 | tw_initconnect->request_id = request_id; |
| 1030 | tw_initconnect->message_credits = cpu_to_le16(message_credits); |
| 1031 | tw_initconnect->features = set_features; |
| 1032 | |
| 1033 | /* Turn on 64-bit sgl support if we need to */ |
| 1034 | tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0; |
| 1035 | |
| 1036 | tw_initconnect->features = cpu_to_le32(tw_initconnect->features); |
| 1037 | |
| 1038 | if (set_features & TW_EXTENDED_INIT_CONNECT) { |
| 1039 | tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED; |
| 1040 | tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl); |
| 1041 | tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id); |
| 1042 | tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch); |
| 1043 | tw_initconnect->fw_build = cpu_to_le16(current_fw_build); |
| 1044 | } else |
| 1045 | tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE; |
| 1046 | |
| 1047 | /* Send command packet to the board */ |
| 1048 | twl_post_command_packet(tw_dev, request_id); |
| 1049 | |
| 1050 | /* Poll for completion */ |
| 1051 | if (twl_poll_response(tw_dev, request_id, 30)) { |
| 1052 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection"); |
| 1053 | } else { |
| 1054 | if (set_features & TW_EXTENDED_INIT_CONNECT) { |
| 1055 | *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl); |
| 1056 | *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id); |
| 1057 | *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch); |
| 1058 | *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build); |
| 1059 | *init_connect_result = le32_to_cpu(tw_initconnect->result); |
| 1060 | } |
| 1061 | retval = 0; |
| 1062 | } |
| 1063 | |
| 1064 | tw_dev->posted_request_count--; |
| 1065 | tw_dev->state[request_id] = TW_S_INITIAL; |
| 1066 | |
| 1067 | return retval; |
| 1068 | } /* End twl_initconnection() */ |
| 1069 | |
| 1070 | /* This function will initialize the fields of a device extension */ |
| 1071 | static int twl_initialize_device_extension(TW_Device_Extension *tw_dev) |
| 1072 | { |
| 1073 | int i, retval = 1; |
| 1074 | |
| 1075 | /* Initialize command packet buffers */ |
| 1076 | if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) { |
| 1077 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed"); |
| 1078 | goto out; |
| 1079 | } |
| 1080 | |
| 1081 | /* Initialize generic buffer */ |
| 1082 | if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) { |
| 1083 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed"); |
| 1084 | goto out; |
| 1085 | } |
| 1086 | |
| 1087 | /* Allocate sense buffers */ |
| 1088 | if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) { |
| 1089 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed"); |
| 1090 | goto out; |
| 1091 | } |
| 1092 | |
| 1093 | /* Allocate event info space */ |
| 1094 | tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL); |
| 1095 | if (!tw_dev->event_queue[0]) { |
| 1096 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed"); |
| 1097 | goto out; |
| 1098 | } |
| 1099 | |
| 1100 | for (i = 0; i < TW_Q_LENGTH; i++) { |
| 1101 | tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event))); |
| 1102 | tw_dev->free_queue[i] = i; |
| 1103 | tw_dev->state[i] = TW_S_INITIAL; |
| 1104 | } |
| 1105 | |
| 1106 | tw_dev->free_head = TW_Q_START; |
| 1107 | tw_dev->free_tail = TW_Q_START; |
| 1108 | tw_dev->error_sequence_id = 1; |
| 1109 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| 1110 | |
| 1111 | mutex_init(&tw_dev->ioctl_lock); |
| 1112 | init_waitqueue_head(&tw_dev->ioctl_wqueue); |
| 1113 | |
| 1114 | retval = 0; |
| 1115 | out: |
| 1116 | return retval; |
| 1117 | } /* End twl_initialize_device_extension() */ |
| 1118 | |
| 1119 | /* This function will perform a pci-dma unmap */ |
| 1120 | static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) |
| 1121 | { |
| 1122 | struct scsi_cmnd *cmd = tw_dev->srb[request_id]; |
| 1123 | |
| 1124 | if (cmd->SCp.phase == TW_PHASE_SGLIST) |
| 1125 | scsi_dma_unmap(cmd); |
| 1126 | } /* End twl_unmap_scsi_data() */ |
| 1127 | |
| 1128 | /* This function will handle attention interrupts */ |
| 1129 | static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev) |
| 1130 | { |
| 1131 | int retval = 1; |
| 1132 | u32 request_id, doorbell; |
| 1133 | |
| 1134 | /* Read doorbell status */ |
| 1135 | doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev)); |
| 1136 | |
| 1137 | /* Check for controller errors */ |
| 1138 | if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) { |
| 1139 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing"); |
| 1140 | goto out; |
| 1141 | } |
| 1142 | |
| 1143 | /* Check if we need to perform an AEN drain */ |
| 1144 | if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) { |
| 1145 | if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) { |
| 1146 | twl_get_request_id(tw_dev, &request_id); |
| 1147 | if (twl_aen_read_queue(tw_dev, request_id)) { |
| 1148 | tw_dev->state[request_id] = TW_S_COMPLETED; |
| 1149 | twl_free_request_id(tw_dev, request_id); |
| 1150 | clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); |
| 1151 | } |
| 1152 | } |
| 1153 | } |
| 1154 | |
| 1155 | retval = 0; |
| 1156 | out: |
| 1157 | /* Clear doorbell interrupt */ |
| 1158 | TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| 1159 | |
| 1160 | /* Make sure the clear was flushed by reading it back */ |
| 1161 | readl(TWL_HOBDBC_REG_ADDR(tw_dev)); |
| 1162 | |
| 1163 | return retval; |
| 1164 | } /* End twl_handle_attention_interrupt() */ |
| 1165 | |
| 1166 | /* Interrupt service routine */ |
| 1167 | static irqreturn_t twl_interrupt(int irq, void *dev_instance) |
| 1168 | { |
| 1169 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; |
| 1170 | int i, handled = 0, error = 0; |
| 1171 | dma_addr_t mfa = 0; |
| 1172 | u32 reg, regl, regh, response, request_id = 0; |
| 1173 | struct scsi_cmnd *cmd; |
| 1174 | TW_Command_Full *full_command_packet; |
| 1175 | |
| 1176 | spin_lock(tw_dev->host->host_lock); |
| 1177 | |
| 1178 | /* Read host interrupt status */ |
| 1179 | reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); |
| 1180 | |
| 1181 | /* Check if this is our interrupt, otherwise bail */ |
| 1182 | if (!(reg & TWL_HISTATUS_VALID_INTERRUPT)) |
| 1183 | goto twl_interrupt_bail; |
| 1184 | |
| 1185 | handled = 1; |
| 1186 | |
| 1187 | /* If we are resetting, bail */ |
| 1188 | if (test_bit(TW_IN_RESET, &tw_dev->flags)) |
| 1189 | goto twl_interrupt_bail; |
| 1190 | |
| 1191 | /* Attention interrupt */ |
| 1192 | if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) { |
| 1193 | if (twl_handle_attention_interrupt(tw_dev)) { |
| 1194 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1195 | goto twl_interrupt_bail; |
| 1196 | } |
| 1197 | } |
| 1198 | |
| 1199 | /* Response interrupt */ |
| 1200 | while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) { |
| 1201 | if (sizeof(dma_addr_t) > 4) { |
| 1202 | regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); |
| 1203 | regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 1204 | mfa = ((u64)regh << 32) | regl; |
| 1205 | } else |
| 1206 | mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 1207 | |
| 1208 | error = 0; |
| 1209 | response = (u32)mfa; |
| 1210 | |
| 1211 | /* Check for command packet error */ |
| 1212 | if (!TW_NOTMFA_OUT(response)) { |
| 1213 | for (i=0;i<TW_Q_LENGTH;i++) { |
| 1214 | if (tw_dev->sense_buffer_phys[i] == mfa) { |
| 1215 | request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id); |
| 1216 | if (tw_dev->srb[request_id] != NULL) |
| 1217 | error = twl_fill_sense(tw_dev, i, request_id, 1, 1); |
| 1218 | else { |
| 1219 | /* Skip ioctl error prints */ |
| 1220 | if (request_id != tw_dev->chrdev_request_id) |
| 1221 | error = twl_fill_sense(tw_dev, i, request_id, 0, 1); |
| 1222 | else |
| 1223 | memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header)); |
| 1224 | } |
| 1225 | |
| 1226 | /* Now re-post the sense buffer */ |
| 1227 | writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); |
| 1228 | writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 1229 | break; |
| 1230 | } |
| 1231 | } |
| 1232 | } else |
| 1233 | request_id = TW_RESID_OUT(response); |
| 1234 | |
| 1235 | full_command_packet = tw_dev->command_packet_virt[request_id]; |
| 1236 | |
| 1237 | /* Check for correct state */ |
| 1238 | if (tw_dev->state[request_id] != TW_S_POSTED) { |
| 1239 | if (tw_dev->srb[request_id] != NULL) { |
| 1240 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted"); |
| 1241 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1242 | goto twl_interrupt_bail; |
| 1243 | } |
| 1244 | } |
| 1245 | |
| 1246 | /* Check for internal command completion */ |
| 1247 | if (tw_dev->srb[request_id] == NULL) { |
| 1248 | if (request_id != tw_dev->chrdev_request_id) { |
| 1249 | if (twl_aen_complete(tw_dev, request_id)) |
| 1250 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt"); |
| 1251 | } else { |
| 1252 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| 1253 | wake_up(&tw_dev->ioctl_wqueue); |
| 1254 | } |
| 1255 | } else { |
| 1256 | cmd = tw_dev->srb[request_id]; |
| 1257 | |
| 1258 | if (!error) |
| 1259 | cmd->result = (DID_OK << 16); |
| 1260 | |
| 1261 | /* Report residual bytes for single sgl */ |
| 1262 | if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) { |
| 1263 | if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id])) |
| 1264 | scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length); |
| 1265 | } |
| 1266 | |
| 1267 | /* Now complete the io */ |
| 1268 | tw_dev->state[request_id] = TW_S_COMPLETED; |
| 1269 | twl_free_request_id(tw_dev, request_id); |
| 1270 | tw_dev->posted_request_count--; |
| 1271 | tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); |
| 1272 | twl_unmap_scsi_data(tw_dev, request_id); |
| 1273 | } |
| 1274 | |
| 1275 | /* Check for another response interrupt */ |
| 1276 | reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); |
| 1277 | } |
| 1278 | |
| 1279 | twl_interrupt_bail: |
| 1280 | spin_unlock(tw_dev->host->host_lock); |
| 1281 | return IRQ_RETVAL(handled); |
| 1282 | } /* End twl_interrupt() */ |
| 1283 | |
| 1284 | /* This function will poll for a register change */ |
| 1285 | static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds) |
| 1286 | { |
| 1287 | unsigned long before; |
| 1288 | int retval = 1; |
| 1289 | u32 reg_value; |
| 1290 | |
| 1291 | reg_value = readl(reg); |
| 1292 | before = jiffies; |
| 1293 | |
| 1294 | while ((reg_value & value) != result) { |
| 1295 | reg_value = readl(reg); |
| 1296 | if (time_after(jiffies, before + HZ * seconds)) |
| 1297 | goto out; |
| 1298 | msleep(50); |
| 1299 | } |
| 1300 | retval = 0; |
| 1301 | out: |
| 1302 | return retval; |
| 1303 | } /* End twl_poll_register() */ |
| 1304 | |
| 1305 | /* This function will reset a controller */ |
| 1306 | static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) |
| 1307 | { |
| 1308 | int retval = 1; |
| 1309 | int i = 0; |
| 1310 | u32 status = 0; |
| 1311 | unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0; |
| 1312 | unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0; |
| 1313 | u32 init_connect_result = 0; |
| 1314 | int tries = 0; |
| 1315 | int do_soft_reset = soft_reset; |
| 1316 | |
| 1317 | while (tries < TW_MAX_RESET_TRIES) { |
| 1318 | /* Do a soft reset if one is needed */ |
| 1319 | if (do_soft_reset) { |
| 1320 | TWL_SOFT_RESET(tw_dev); |
| 1321 | |
| 1322 | /* Make sure controller is in a good state */ |
| 1323 | if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) { |
| 1324 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence"); |
| 1325 | tries++; |
| 1326 | continue; |
| 1327 | } |
| 1328 | if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) { |
| 1329 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence"); |
| 1330 | tries++; |
| 1331 | continue; |
| 1332 | } |
| 1333 | } |
| 1334 | |
| 1335 | /* Initconnect */ |
| 1336 | if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS, |
| 1337 | TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL, |
| 1338 | TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH, |
| 1339 | TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl, |
| 1340 | &fw_on_ctlr_arch_id, &fw_on_ctlr_branch, |
| 1341 | &fw_on_ctlr_build, &init_connect_result)) { |
| 1342 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL"); |
| 1343 | do_soft_reset = 1; |
| 1344 | tries++; |
| 1345 | continue; |
| 1346 | } |
| 1347 | |
| 1348 | /* Load sense buffers */ |
| 1349 | while (i < TW_Q_LENGTH) { |
| 1350 | writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); |
| 1351 | writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); |
| 1352 | |
| 1353 | /* Check status for over-run after each write */ |
| 1354 | status = readl(TWL_STATUS_REG_ADDR(tw_dev)); |
| 1355 | if (!(status & TWL_STATUS_OVERRUN_SUBMIT)) |
| 1356 | i++; |
| 1357 | } |
| 1358 | |
| 1359 | /* Now check status */ |
| 1360 | status = readl(TWL_STATUS_REG_ADDR(tw_dev)); |
| 1361 | if (status) { |
| 1362 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers"); |
| 1363 | do_soft_reset = 1; |
| 1364 | tries++; |
| 1365 | continue; |
| 1366 | } |
| 1367 | |
| 1368 | /* Drain the AEN queue */ |
| 1369 | if (twl_aen_drain_queue(tw_dev, soft_reset)) { |
| 1370 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence"); |
| 1371 | do_soft_reset = 1; |
| 1372 | tries++; |
| 1373 | continue; |
| 1374 | } |
| 1375 | |
| 1376 | /* Load rest of compatibility struct */ |
| 1377 | strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION)); |
| 1378 | tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL; |
| 1379 | tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH; |
| 1380 | tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD; |
| 1381 | tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL; |
| 1382 | tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH; |
| 1383 | tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD; |
| 1384 | tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl; |
| 1385 | tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch; |
| 1386 | tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build; |
| 1387 | |
| 1388 | /* If we got here, controller is in a good state */ |
| 1389 | retval = 0; |
| 1390 | goto out; |
| 1391 | } |
| 1392 | out: |
| 1393 | return retval; |
| 1394 | } /* End twl_reset_sequence() */ |
| 1395 | |
| 1396 | /* This function will reset a device extension */ |
| 1397 | static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) |
| 1398 | { |
| 1399 | int i = 0, retval = 1; |
| 1400 | unsigned long flags = 0; |
| 1401 | |
| 1402 | /* Block SCSI requests while we are resetting */ |
| 1403 | if (ioctl_reset) |
| 1404 | scsi_block_requests(tw_dev->host); |
| 1405 | |
| 1406 | set_bit(TW_IN_RESET, &tw_dev->flags); |
| 1407 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1408 | TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| 1409 | |
| 1410 | spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| 1411 | |
| 1412 | /* Abort all requests that are in progress */ |
| 1413 | for (i = 0; i < TW_Q_LENGTH; i++) { |
| 1414 | if ((tw_dev->state[i] != TW_S_FINISHED) && |
| 1415 | (tw_dev->state[i] != TW_S_INITIAL) && |
| 1416 | (tw_dev->state[i] != TW_S_COMPLETED)) { |
| 1417 | if (tw_dev->srb[i]) { |
| 1418 | tw_dev->srb[i]->result = (DID_RESET << 16); |
| 1419 | tw_dev->srb[i]->scsi_done(tw_dev->srb[i]); |
| 1420 | twl_unmap_scsi_data(tw_dev, i); |
| 1421 | } |
| 1422 | } |
| 1423 | } |
| 1424 | |
| 1425 | /* Reset queues and counts */ |
| 1426 | for (i = 0; i < TW_Q_LENGTH; i++) { |
| 1427 | tw_dev->free_queue[i] = i; |
| 1428 | tw_dev->state[i] = TW_S_INITIAL; |
| 1429 | } |
| 1430 | tw_dev->free_head = TW_Q_START; |
| 1431 | tw_dev->free_tail = TW_Q_START; |
| 1432 | tw_dev->posted_request_count = 0; |
| 1433 | |
| 1434 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| 1435 | |
| 1436 | if (twl_reset_sequence(tw_dev, 1)) |
| 1437 | goto out; |
| 1438 | |
| 1439 | TWL_UNMASK_INTERRUPTS(tw_dev); |
| 1440 | |
| 1441 | clear_bit(TW_IN_RESET, &tw_dev->flags); |
| 1442 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| 1443 | |
| 1444 | retval = 0; |
| 1445 | out: |
| 1446 | if (ioctl_reset) |
| 1447 | scsi_unblock_requests(tw_dev->host); |
| 1448 | return retval; |
| 1449 | } /* End twl_reset_device_extension() */ |
| 1450 | |
| 1451 | /* This funciton returns unit geometry in cylinders/heads/sectors */ |
| 1452 | static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) |
| 1453 | { |
| 1454 | int heads, sectors; |
| 1455 | TW_Device_Extension *tw_dev; |
| 1456 | |
| 1457 | tw_dev = (TW_Device_Extension *)sdev->host->hostdata; |
| 1458 | |
| 1459 | if (capacity >= 0x200000) { |
| 1460 | heads = 255; |
| 1461 | sectors = 63; |
| 1462 | } else { |
| 1463 | heads = 64; |
| 1464 | sectors = 32; |
| 1465 | } |
| 1466 | |
| 1467 | geom[0] = heads; |
| 1468 | geom[1] = sectors; |
| 1469 | geom[2] = sector_div(capacity, heads * sectors); /* cylinders */ |
| 1470 | |
| 1471 | return 0; |
| 1472 | } /* End twl_scsi_biosparam() */ |
| 1473 | |
| 1474 | /* This is the new scsi eh reset function */ |
| 1475 | static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt) |
| 1476 | { |
| 1477 | TW_Device_Extension *tw_dev = NULL; |
| 1478 | int retval = FAILED; |
| 1479 | |
| 1480 | tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; |
| 1481 | |
| 1482 | tw_dev->num_resets++; |
| 1483 | |
| 1484 | sdev_printk(KERN_WARNING, SCpnt->device, |
| 1485 | "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n", |
| 1486 | TW_DRIVER, 0x2c, SCpnt->cmnd[0]); |
| 1487 | |
| 1488 | /* Make sure we are not issuing an ioctl or resetting from ioctl */ |
| 1489 | mutex_lock(&tw_dev->ioctl_lock); |
| 1490 | |
| 1491 | /* Now reset the card and some of the device extension data */ |
| 1492 | if (twl_reset_device_extension(tw_dev, 0)) { |
| 1493 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset"); |
| 1494 | goto out; |
| 1495 | } |
| 1496 | |
| 1497 | retval = SUCCESS; |
| 1498 | out: |
| 1499 | mutex_unlock(&tw_dev->ioctl_lock); |
| 1500 | return retval; |
| 1501 | } /* End twl_scsi_eh_reset() */ |
| 1502 | |
| 1503 | /* This is the main scsi queue function to handle scsi opcodes */ |
Jeff Garzik | f281233 | 2010-11-16 02:10:29 -0500 | [diff] [blame] | 1504 | static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 1505 | { |
| 1506 | int request_id, retval; |
| 1507 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; |
| 1508 | |
| 1509 | /* If we are resetting due to timed out ioctl, report as busy */ |
| 1510 | if (test_bit(TW_IN_RESET, &tw_dev->flags)) { |
| 1511 | retval = SCSI_MLQUEUE_HOST_BUSY; |
| 1512 | goto out; |
| 1513 | } |
| 1514 | |
| 1515 | /* Save done function into scsi_cmnd struct */ |
| 1516 | SCpnt->scsi_done = done; |
| 1517 | |
| 1518 | /* Get a free request id */ |
| 1519 | twl_get_request_id(tw_dev, &request_id); |
| 1520 | |
| 1521 | /* Save the scsi command for use by the ISR */ |
| 1522 | tw_dev->srb[request_id] = SCpnt; |
| 1523 | |
| 1524 | /* Initialize phase to zero */ |
| 1525 | SCpnt->SCp.phase = TW_PHASE_INITIAL; |
| 1526 | |
| 1527 | retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); |
| 1528 | if (retval) { |
| 1529 | tw_dev->state[request_id] = TW_S_COMPLETED; |
| 1530 | twl_free_request_id(tw_dev, request_id); |
| 1531 | SCpnt->result = (DID_ERROR << 16); |
| 1532 | done(SCpnt); |
| 1533 | retval = 0; |
| 1534 | } |
| 1535 | out: |
| 1536 | return retval; |
| 1537 | } /* End twl_scsi_queue() */ |
| 1538 | |
Jeff Garzik | f281233 | 2010-11-16 02:10:29 -0500 | [diff] [blame] | 1539 | static DEF_SCSI_QCMD(twl_scsi_queue) |
| 1540 | |
adam radford | f619106 | 2009-10-23 14:52:33 -0700 | [diff] [blame] | 1541 | /* This function tells the controller to shut down */ |
| 1542 | static void __twl_shutdown(TW_Device_Extension *tw_dev) |
| 1543 | { |
| 1544 | /* Disable interrupts */ |
| 1545 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1546 | |
| 1547 | /* Free up the IRQ */ |
| 1548 | free_irq(tw_dev->tw_pci_dev->irq, tw_dev); |
| 1549 | |
| 1550 | printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no); |
| 1551 | |
| 1552 | /* Tell the card we are shutting down */ |
| 1553 | if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { |
| 1554 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed"); |
| 1555 | } else { |
| 1556 | printk(KERN_WARNING "3w-sas: Shutdown complete.\n"); |
| 1557 | } |
| 1558 | |
| 1559 | /* Clear doorbell interrupt just before exit */ |
| 1560 | TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| 1561 | } /* End __twl_shutdown() */ |
| 1562 | |
| 1563 | /* Wrapper for __twl_shutdown */ |
| 1564 | static void twl_shutdown(struct pci_dev *pdev) |
| 1565 | { |
| 1566 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
| 1567 | TW_Device_Extension *tw_dev; |
| 1568 | |
| 1569 | if (!host) |
| 1570 | return; |
| 1571 | |
| 1572 | tw_dev = (TW_Device_Extension *)host->hostdata; |
| 1573 | |
| 1574 | if (tw_dev->online) |
| 1575 | __twl_shutdown(tw_dev); |
| 1576 | } /* End twl_shutdown() */ |
| 1577 | |
| 1578 | /* This function configures unit settings when a unit is coming on-line */ |
| 1579 | static int twl_slave_configure(struct scsi_device *sdev) |
| 1580 | { |
| 1581 | /* Force 60 second timeout */ |
| 1582 | blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); |
| 1583 | |
| 1584 | return 0; |
| 1585 | } /* End twl_slave_configure() */ |
| 1586 | |
| 1587 | /* scsi_host_template initializer */ |
| 1588 | static struct scsi_host_template driver_template = { |
| 1589 | .module = THIS_MODULE, |
| 1590 | .name = "3w-sas", |
| 1591 | .queuecommand = twl_scsi_queue, |
| 1592 | .eh_host_reset_handler = twl_scsi_eh_reset, |
| 1593 | .bios_param = twl_scsi_biosparam, |
| 1594 | .change_queue_depth = twl_change_queue_depth, |
| 1595 | .can_queue = TW_Q_LENGTH-2, |
| 1596 | .slave_configure = twl_slave_configure, |
| 1597 | .this_id = -1, |
| 1598 | .sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH, |
| 1599 | .max_sectors = TW_MAX_SECTORS, |
| 1600 | .cmd_per_lun = TW_MAX_CMDS_PER_LUN, |
| 1601 | .use_clustering = ENABLE_CLUSTERING, |
| 1602 | .shost_attrs = twl_host_attrs, |
| 1603 | .emulated = 1 |
| 1604 | }; |
| 1605 | |
| 1606 | /* This function will probe and initialize a card */ |
| 1607 | static int __devinit twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) |
| 1608 | { |
| 1609 | struct Scsi_Host *host = NULL; |
| 1610 | TW_Device_Extension *tw_dev; |
| 1611 | int retval = -ENODEV; |
| 1612 | int *ptr_phycount, phycount=0; |
| 1613 | |
| 1614 | retval = pci_enable_device(pdev); |
| 1615 | if (retval) { |
| 1616 | TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device"); |
| 1617 | goto out_disable_device; |
| 1618 | } |
| 1619 | |
| 1620 | pci_set_master(pdev); |
| 1621 | pci_try_set_mwi(pdev); |
| 1622 | |
| 1623 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) |
| 1624 | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) |
| 1625 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
| 1626 | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| 1627 | TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask"); |
| 1628 | retval = -ENODEV; |
| 1629 | goto out_disable_device; |
| 1630 | } |
| 1631 | |
| 1632 | host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); |
| 1633 | if (!host) { |
| 1634 | TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension"); |
| 1635 | retval = -ENOMEM; |
| 1636 | goto out_disable_device; |
| 1637 | } |
| 1638 | tw_dev = shost_priv(host); |
| 1639 | |
| 1640 | /* Save values to device extension */ |
| 1641 | tw_dev->host = host; |
| 1642 | tw_dev->tw_pci_dev = pdev; |
| 1643 | |
| 1644 | if (twl_initialize_device_extension(tw_dev)) { |
| 1645 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension"); |
| 1646 | goto out_free_device_extension; |
| 1647 | } |
| 1648 | |
| 1649 | /* Request IO regions */ |
| 1650 | retval = pci_request_regions(pdev, "3w-sas"); |
| 1651 | if (retval) { |
| 1652 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region"); |
| 1653 | goto out_free_device_extension; |
| 1654 | } |
| 1655 | |
| 1656 | /* Save base address, use region 1 */ |
| 1657 | tw_dev->base_addr = pci_iomap(pdev, 1, 0); |
| 1658 | if (!tw_dev->base_addr) { |
| 1659 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap"); |
| 1660 | goto out_release_mem_region; |
| 1661 | } |
| 1662 | |
| 1663 | /* Disable interrupts on the card */ |
| 1664 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1665 | |
| 1666 | /* Initialize the card */ |
| 1667 | if (twl_reset_sequence(tw_dev, 0)) { |
| 1668 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe"); |
| 1669 | goto out_iounmap; |
| 1670 | } |
| 1671 | |
| 1672 | /* Set host specific parameters */ |
| 1673 | host->max_id = TW_MAX_UNITS; |
| 1674 | host->max_cmd_len = TW_MAX_CDB_LEN; |
| 1675 | host->max_lun = TW_MAX_LUNS; |
| 1676 | host->max_channel = 0; |
| 1677 | |
| 1678 | /* Register the card with the kernel SCSI layer */ |
| 1679 | retval = scsi_add_host(host, &pdev->dev); |
| 1680 | if (retval) { |
| 1681 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed"); |
| 1682 | goto out_iounmap; |
| 1683 | } |
| 1684 | |
| 1685 | pci_set_drvdata(pdev, host); |
| 1686 | |
| 1687 | printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n", |
| 1688 | host->host_no, |
| 1689 | (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, |
| 1690 | TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH), |
| 1691 | (u64)pci_resource_start(pdev, 1), pdev->irq); |
| 1692 | |
| 1693 | ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE, |
| 1694 | TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH); |
| 1695 | if (ptr_phycount) |
| 1696 | phycount = le32_to_cpu(*(int *)ptr_phycount); |
| 1697 | |
| 1698 | printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n", |
| 1699 | host->host_no, |
| 1700 | (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, |
| 1701 | TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH), |
| 1702 | (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE, |
| 1703 | TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH), |
| 1704 | phycount); |
| 1705 | |
| 1706 | /* Try to enable MSI */ |
| 1707 | if (use_msi && !pci_enable_msi(pdev)) |
| 1708 | set_bit(TW_USING_MSI, &tw_dev->flags); |
| 1709 | |
| 1710 | /* Now setup the interrupt handler */ |
| 1711 | retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); |
| 1712 | if (retval) { |
| 1713 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ"); |
| 1714 | goto out_remove_host; |
| 1715 | } |
| 1716 | |
| 1717 | twl_device_extension_list[twl_device_extension_count] = tw_dev; |
| 1718 | twl_device_extension_count++; |
| 1719 | |
| 1720 | /* Re-enable interrupts on the card */ |
| 1721 | TWL_UNMASK_INTERRUPTS(tw_dev); |
| 1722 | |
| 1723 | /* Finally, scan the host */ |
| 1724 | scsi_scan_host(host); |
| 1725 | |
| 1726 | /* Add sysfs binary files */ |
| 1727 | if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr)) |
| 1728 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read"); |
| 1729 | if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr)) |
| 1730 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info"); |
| 1731 | |
| 1732 | if (twl_major == -1) { |
| 1733 | if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0) |
| 1734 | TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device"); |
| 1735 | } |
| 1736 | tw_dev->online = 1; |
| 1737 | return 0; |
| 1738 | |
| 1739 | out_remove_host: |
| 1740 | if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| 1741 | pci_disable_msi(pdev); |
| 1742 | scsi_remove_host(host); |
| 1743 | out_iounmap: |
| 1744 | iounmap(tw_dev->base_addr); |
| 1745 | out_release_mem_region: |
| 1746 | pci_release_regions(pdev); |
| 1747 | out_free_device_extension: |
| 1748 | twl_free_device_extension(tw_dev); |
| 1749 | scsi_host_put(host); |
| 1750 | out_disable_device: |
| 1751 | pci_disable_device(pdev); |
| 1752 | |
| 1753 | return retval; |
| 1754 | } /* End twl_probe() */ |
| 1755 | |
| 1756 | /* This function is called to remove a device */ |
| 1757 | static void twl_remove(struct pci_dev *pdev) |
| 1758 | { |
| 1759 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
| 1760 | TW_Device_Extension *tw_dev; |
| 1761 | |
| 1762 | if (!host) |
| 1763 | return; |
| 1764 | |
| 1765 | tw_dev = (TW_Device_Extension *)host->hostdata; |
| 1766 | |
| 1767 | if (!tw_dev->online) |
| 1768 | return; |
| 1769 | |
| 1770 | /* Remove sysfs binary files */ |
| 1771 | sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr); |
| 1772 | sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr); |
| 1773 | |
| 1774 | scsi_remove_host(tw_dev->host); |
| 1775 | |
| 1776 | /* Unregister character device */ |
| 1777 | if (twl_major >= 0) { |
| 1778 | unregister_chrdev(twl_major, "twl"); |
| 1779 | twl_major = -1; |
| 1780 | } |
| 1781 | |
| 1782 | /* Shutdown the card */ |
| 1783 | __twl_shutdown(tw_dev); |
| 1784 | |
| 1785 | /* Disable MSI if enabled */ |
| 1786 | if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| 1787 | pci_disable_msi(pdev); |
| 1788 | |
| 1789 | /* Free IO remapping */ |
| 1790 | iounmap(tw_dev->base_addr); |
| 1791 | |
| 1792 | /* Free up the mem region */ |
| 1793 | pci_release_regions(pdev); |
| 1794 | |
| 1795 | /* Free up device extension resources */ |
| 1796 | twl_free_device_extension(tw_dev); |
| 1797 | |
| 1798 | scsi_host_put(tw_dev->host); |
| 1799 | pci_disable_device(pdev); |
| 1800 | twl_device_extension_count--; |
| 1801 | } /* End twl_remove() */ |
| 1802 | |
| 1803 | #ifdef CONFIG_PM |
| 1804 | /* This function is called on PCI suspend */ |
| 1805 | static int twl_suspend(struct pci_dev *pdev, pm_message_t state) |
| 1806 | { |
| 1807 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
| 1808 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| 1809 | |
| 1810 | printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no); |
| 1811 | /* Disable interrupts */ |
| 1812 | TWL_MASK_INTERRUPTS(tw_dev); |
| 1813 | |
| 1814 | free_irq(tw_dev->tw_pci_dev->irq, tw_dev); |
| 1815 | |
| 1816 | /* Tell the card we are shutting down */ |
| 1817 | if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { |
| 1818 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend"); |
| 1819 | } else { |
| 1820 | printk(KERN_WARNING "3w-sas: Suspend complete.\n"); |
| 1821 | } |
| 1822 | |
| 1823 | /* Clear doorbell interrupt */ |
| 1824 | TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| 1825 | |
| 1826 | pci_save_state(pdev); |
| 1827 | pci_disable_device(pdev); |
| 1828 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| 1829 | |
| 1830 | return 0; |
| 1831 | } /* End twl_suspend() */ |
| 1832 | |
| 1833 | /* This function is called on PCI resume */ |
| 1834 | static int twl_resume(struct pci_dev *pdev) |
| 1835 | { |
| 1836 | int retval = 0; |
| 1837 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
| 1838 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| 1839 | |
| 1840 | printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no); |
| 1841 | pci_set_power_state(pdev, PCI_D0); |
| 1842 | pci_enable_wake(pdev, PCI_D0, 0); |
| 1843 | pci_restore_state(pdev); |
| 1844 | |
| 1845 | retval = pci_enable_device(pdev); |
| 1846 | if (retval) { |
| 1847 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume"); |
| 1848 | return retval; |
| 1849 | } |
| 1850 | |
| 1851 | pci_set_master(pdev); |
| 1852 | pci_try_set_mwi(pdev); |
| 1853 | |
| 1854 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) |
| 1855 | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) |
| 1856 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
| 1857 | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| 1858 | TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume"); |
| 1859 | retval = -ENODEV; |
| 1860 | goto out_disable_device; |
| 1861 | } |
| 1862 | |
| 1863 | /* Initialize the card */ |
| 1864 | if (twl_reset_sequence(tw_dev, 0)) { |
| 1865 | retval = -ENODEV; |
| 1866 | goto out_disable_device; |
| 1867 | } |
| 1868 | |
| 1869 | /* Now setup the interrupt handler */ |
| 1870 | retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); |
| 1871 | if (retval) { |
| 1872 | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume"); |
| 1873 | retval = -ENODEV; |
| 1874 | goto out_disable_device; |
| 1875 | } |
| 1876 | |
| 1877 | /* Now enable MSI if enabled */ |
| 1878 | if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| 1879 | pci_enable_msi(pdev); |
| 1880 | |
| 1881 | /* Re-enable interrupts on the card */ |
| 1882 | TWL_UNMASK_INTERRUPTS(tw_dev); |
| 1883 | |
| 1884 | printk(KERN_WARNING "3w-sas: Resume complete.\n"); |
| 1885 | return 0; |
| 1886 | |
| 1887 | out_disable_device: |
| 1888 | scsi_remove_host(host); |
| 1889 | pci_disable_device(pdev); |
| 1890 | |
| 1891 | return retval; |
| 1892 | } /* End twl_resume() */ |
| 1893 | #endif |
| 1894 | |
| 1895 | /* PCI Devices supported by this driver */ |
| 1896 | static struct pci_device_id twl_pci_tbl[] __devinitdata = { |
| 1897 | { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) }, |
| 1898 | { } |
| 1899 | }; |
| 1900 | MODULE_DEVICE_TABLE(pci, twl_pci_tbl); |
| 1901 | |
| 1902 | /* pci_driver initializer */ |
| 1903 | static struct pci_driver twl_driver = { |
| 1904 | .name = "3w-sas", |
| 1905 | .id_table = twl_pci_tbl, |
| 1906 | .probe = twl_probe, |
| 1907 | .remove = twl_remove, |
| 1908 | #ifdef CONFIG_PM |
| 1909 | .suspend = twl_suspend, |
| 1910 | .resume = twl_resume, |
| 1911 | #endif |
| 1912 | .shutdown = twl_shutdown |
| 1913 | }; |
| 1914 | |
| 1915 | /* This function is called on driver initialization */ |
| 1916 | static int __init twl_init(void) |
| 1917 | { |
| 1918 | printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); |
| 1919 | |
| 1920 | return pci_register_driver(&twl_driver); |
| 1921 | } /* End twl_init() */ |
| 1922 | |
| 1923 | /* This function is called on driver exit */ |
| 1924 | static void __exit twl_exit(void) |
| 1925 | { |
| 1926 | pci_unregister_driver(&twl_driver); |
| 1927 | } /* End twl_exit() */ |
| 1928 | |
| 1929 | module_init(twl_init); |
| 1930 | module_exit(twl_exit); |
| 1931 | |