Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1 | /* |
| 2 | * MUSB OTG driver defines |
| 3 | * |
| 4 | * Copyright 2005 Mentor Graphics Corporation |
| 5 | * Copyright (C) 2005-2006 by Texas Instruments |
| 6 | * Copyright (C) 2006-2007 Nokia Corporation |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 20 | * 02110-1301 USA |
| 21 | * |
| 22 | * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| 23 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 24 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 25 | * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 26 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 27 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 28 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 29 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 30 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 31 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 32 | * |
| 33 | */ |
| 34 | |
| 35 | #ifndef __MUSB_CORE_H__ |
| 36 | #define __MUSB_CORE_H__ |
| 37 | |
| 38 | #include <linux/slab.h> |
| 39 | #include <linux/list.h> |
| 40 | #include <linux/interrupt.h> |
| 41 | #include <linux/smp_lock.h> |
| 42 | #include <linux/errno.h> |
| 43 | #include <linux/clk.h> |
| 44 | #include <linux/device.h> |
| 45 | #include <linux/usb/ch9.h> |
| 46 | #include <linux/usb/gadget.h> |
| 47 | #include <linux/usb.h> |
| 48 | #include <linux/usb/otg.h> |
| 49 | #include <linux/usb/musb.h> |
| 50 | |
| 51 | struct musb; |
| 52 | struct musb_hw_ep; |
| 53 | struct musb_ep; |
| 54 | |
| 55 | |
| 56 | #include "musb_debug.h" |
| 57 | #include "musb_dma.h" |
| 58 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 59 | #include "musb_io.h" |
| 60 | #include "musb_regs.h" |
| 61 | |
| 62 | #include "musb_gadget.h" |
| 63 | #include "../core/hcd.h" |
| 64 | #include "musb_host.h" |
| 65 | |
| 66 | |
| 67 | |
| 68 | #ifdef CONFIG_USB_MUSB_OTG |
| 69 | |
| 70 | #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) |
| 71 | #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) |
| 72 | #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) |
| 73 | |
| 74 | /* NOTE: otg and peripheral-only state machines start at B_IDLE. |
| 75 | * OTG or host-only go to A_IDLE when ID is sensed. |
| 76 | */ |
| 77 | #define is_peripheral_active(m) (!(m)->is_host) |
| 78 | #define is_host_active(m) ((m)->is_host) |
| 79 | |
| 80 | #else |
| 81 | #define is_peripheral_enabled(musb) is_peripheral_capable() |
| 82 | #define is_host_enabled(musb) is_host_capable() |
| 83 | #define is_otg_enabled(musb) 0 |
| 84 | |
| 85 | #define is_peripheral_active(musb) is_peripheral_capable() |
| 86 | #define is_host_active(musb) is_host_capable() |
| 87 | #endif |
| 88 | |
| 89 | #if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL) |
| 90 | /* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always |
| 91 | * override that choice selection (often USB_GADGET_DUMMY_HCD). |
| 92 | */ |
| 93 | #ifndef CONFIG_USB_GADGET_MUSB_HDRC |
| 94 | #error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC |
| 95 | #endif |
| 96 | #endif /* need MUSB gadget selection */ |
| 97 | |
| 98 | |
| 99 | #ifdef CONFIG_PROC_FS |
| 100 | #include <linux/fs.h> |
| 101 | #define MUSB_CONFIG_PROC_FS |
| 102 | #endif |
| 103 | |
| 104 | /****************************** PERIPHERAL ROLE *****************************/ |
| 105 | |
| 106 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 107 | |
| 108 | #define is_peripheral_capable() (1) |
| 109 | |
| 110 | extern irqreturn_t musb_g_ep0_irq(struct musb *); |
| 111 | extern void musb_g_tx(struct musb *, u8); |
| 112 | extern void musb_g_rx(struct musb *, u8); |
| 113 | extern void musb_g_reset(struct musb *); |
| 114 | extern void musb_g_suspend(struct musb *); |
| 115 | extern void musb_g_resume(struct musb *); |
| 116 | extern void musb_g_wakeup(struct musb *); |
| 117 | extern void musb_g_disconnect(struct musb *); |
| 118 | |
| 119 | #else |
| 120 | |
| 121 | #define is_peripheral_capable() (0) |
| 122 | |
| 123 | static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| 124 | static inline void musb_g_reset(struct musb *m) {} |
| 125 | static inline void musb_g_suspend(struct musb *m) {} |
| 126 | static inline void musb_g_resume(struct musb *m) {} |
| 127 | static inline void musb_g_wakeup(struct musb *m) {} |
| 128 | static inline void musb_g_disconnect(struct musb *m) {} |
| 129 | |
| 130 | #endif |
| 131 | |
| 132 | /****************************** HOST ROLE ***********************************/ |
| 133 | |
| 134 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 135 | |
| 136 | #define is_host_capable() (1) |
| 137 | |
| 138 | extern irqreturn_t musb_h_ep0_irq(struct musb *); |
| 139 | extern void musb_host_tx(struct musb *, u8); |
| 140 | extern void musb_host_rx(struct musb *, u8); |
| 141 | |
| 142 | #else |
| 143 | |
| 144 | #define is_host_capable() (0) |
| 145 | |
| 146 | static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| 147 | static inline void musb_host_tx(struct musb *m, u8 e) {} |
| 148 | static inline void musb_host_rx(struct musb *m, u8 e) {} |
| 149 | |
| 150 | #endif |
| 151 | |
| 152 | |
| 153 | /****************************** CONSTANTS ********************************/ |
| 154 | |
| 155 | #ifndef MUSB_C_NUM_EPS |
| 156 | #define MUSB_C_NUM_EPS ((u8)16) |
| 157 | #endif |
| 158 | |
| 159 | #ifndef MUSB_MAX_END0_PACKET |
| 160 | #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE) |
| 161 | #endif |
| 162 | |
| 163 | /* host side ep0 states */ |
| 164 | enum musb_h_ep0_state { |
| 165 | MUSB_EP0_IDLE, |
| 166 | MUSB_EP0_START, /* expect ack of setup */ |
| 167 | MUSB_EP0_IN, /* expect IN DATA */ |
| 168 | MUSB_EP0_OUT, /* expect ack of OUT DATA */ |
| 169 | MUSB_EP0_STATUS, /* expect ack of STATUS */ |
| 170 | } __attribute__ ((packed)); |
| 171 | |
| 172 | /* peripheral side ep0 states */ |
| 173 | enum musb_g_ep0_state { |
| 174 | MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */ |
| 175 | MUSB_EP0_STAGE_TX, /* IN data */ |
| 176 | MUSB_EP0_STAGE_RX, /* OUT data */ |
| 177 | MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ |
| 178 | MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */ |
| 179 | MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ |
| 180 | } __attribute__ ((packed)); |
| 181 | |
| 182 | /* OTG protocol constants */ |
| 183 | #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ |
| 184 | #define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */ |
| 185 | #define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */ |
| 186 | |
| 187 | /*************************** REGISTER ACCESS ********************************/ |
| 188 | |
| 189 | /* Endpoint registers (other than dynfifo setup) can be accessed either |
| 190 | * directly with the "flat" model, or after setting up an index register. |
| 191 | */ |
| 192 | |
| 193 | #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \ |
| 194 | || defined(CONFIG_ARCH_OMAP3430) |
| 195 | /* REVISIT indexed access seemed to |
| 196 | * misbehave (on DaVinci) for at least peripheral IN ... |
| 197 | */ |
| 198 | #define MUSB_FLAT_REG |
| 199 | #endif |
| 200 | |
| 201 | /* TUSB mapping: "flat" plus ep0 special cases */ |
| 202 | #if defined(CONFIG_USB_TUSB6010) |
| 203 | #define musb_ep_select(_mbase, _epnum) \ |
| 204 | musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| 205 | #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET |
| 206 | |
| 207 | /* "flat" mapping: each endpoint has its own i/o address */ |
| 208 | #elif defined(MUSB_FLAT_REG) |
| 209 | #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum))) |
| 210 | #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET |
| 211 | |
| 212 | /* "indexed" mapping: INDEX register controls register bank select */ |
| 213 | #else |
| 214 | #define musb_ep_select(_mbase, _epnum) \ |
| 215 | musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| 216 | #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET |
| 217 | #endif |
| 218 | |
| 219 | /****************************** FUNCTIONS ********************************/ |
| 220 | |
| 221 | #define MUSB_HST_MODE(_musb)\ |
| 222 | { (_musb)->is_host = true; } |
| 223 | #define MUSB_DEV_MODE(_musb) \ |
| 224 | { (_musb)->is_host = false; } |
| 225 | |
| 226 | #define test_devctl_hst_mode(_x) \ |
| 227 | (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM) |
| 228 | |
| 229 | #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral") |
| 230 | |
| 231 | /******************************** TYPES *************************************/ |
| 232 | |
| 233 | /* |
| 234 | * struct musb_hw_ep - endpoint hardware (bidirectional) |
| 235 | * |
| 236 | * Ordered slightly for better cacheline locality. |
| 237 | */ |
| 238 | struct musb_hw_ep { |
| 239 | struct musb *musb; |
| 240 | void __iomem *fifo; |
| 241 | void __iomem *regs; |
| 242 | |
| 243 | #ifdef CONFIG_USB_TUSB6010 |
| 244 | void __iomem *conf; |
| 245 | #endif |
| 246 | |
| 247 | /* index in musb->endpoints[] */ |
| 248 | u8 epnum; |
| 249 | |
| 250 | /* hardware configuration, possibly dynamic */ |
| 251 | bool is_shared_fifo; |
| 252 | bool tx_double_buffered; |
| 253 | bool rx_double_buffered; |
| 254 | u16 max_packet_sz_tx; |
| 255 | u16 max_packet_sz_rx; |
| 256 | |
| 257 | struct dma_channel *tx_channel; |
| 258 | struct dma_channel *rx_channel; |
| 259 | |
| 260 | #ifdef CONFIG_USB_TUSB6010 |
| 261 | /* TUSB has "asynchronous" and "synchronous" dma modes */ |
| 262 | dma_addr_t fifo_async; |
| 263 | dma_addr_t fifo_sync; |
| 264 | void __iomem *fifo_sync_va; |
| 265 | #endif |
| 266 | |
| 267 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 268 | void __iomem *target_regs; |
| 269 | |
| 270 | /* currently scheduled peripheral endpoint */ |
| 271 | struct musb_qh *in_qh; |
| 272 | struct musb_qh *out_qh; |
| 273 | |
| 274 | u8 rx_reinit; |
| 275 | u8 tx_reinit; |
| 276 | #endif |
| 277 | |
| 278 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 279 | /* peripheral side */ |
| 280 | struct musb_ep ep_in; /* TX */ |
| 281 | struct musb_ep ep_out; /* RX */ |
| 282 | #endif |
| 283 | }; |
| 284 | |
| 285 | static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) |
| 286 | { |
| 287 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 288 | return next_request(&hw_ep->ep_in); |
| 289 | #else |
| 290 | return NULL; |
| 291 | #endif |
| 292 | } |
| 293 | |
| 294 | static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep) |
| 295 | { |
| 296 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 297 | return next_request(&hw_ep->ep_out); |
| 298 | #else |
| 299 | return NULL; |
| 300 | #endif |
| 301 | } |
| 302 | |
| 303 | /* |
| 304 | * struct musb - Driver instance data. |
| 305 | */ |
| 306 | struct musb { |
| 307 | /* device lock */ |
| 308 | spinlock_t lock; |
| 309 | struct clk *clock; |
| 310 | irqreturn_t (*isr)(int, void *); |
| 311 | struct work_struct irq_work; |
| 312 | |
| 313 | /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ |
| 314 | #define MUSB_PORT_STAT_RESUME (1 << 31) |
| 315 | |
| 316 | u32 port1_status; |
| 317 | |
| 318 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 319 | unsigned long rh_timer; |
| 320 | |
| 321 | enum musb_h_ep0_state ep0_stage; |
| 322 | |
| 323 | /* bulk traffic normally dedicates endpoint hardware, and each |
| 324 | * direction has its own ring of host side endpoints. |
| 325 | * we try to progress the transfer at the head of each endpoint's |
| 326 | * queue until it completes or NAKs too much; then we try the next |
| 327 | * endpoint. |
| 328 | */ |
| 329 | struct musb_hw_ep *bulk_ep; |
| 330 | |
| 331 | struct list_head control; /* of musb_qh */ |
| 332 | struct list_head in_bulk; /* of musb_qh */ |
| 333 | struct list_head out_bulk; /* of musb_qh */ |
| 334 | struct musb_qh *periodic[32]; /* tree of interrupt+iso */ |
| 335 | #endif |
| 336 | |
| 337 | /* called with IRQs blocked; ON/nonzero implies starting a session, |
| 338 | * and waiting at least a_wait_vrise_tmout. |
| 339 | */ |
| 340 | void (*board_set_vbus)(struct musb *, int is_on); |
| 341 | |
| 342 | struct dma_controller *dma_controller; |
| 343 | |
| 344 | struct device *controller; |
| 345 | void __iomem *ctrl_base; |
| 346 | void __iomem *mregs; |
| 347 | |
| 348 | #ifdef CONFIG_USB_TUSB6010 |
| 349 | dma_addr_t async; |
| 350 | dma_addr_t sync; |
| 351 | void __iomem *sync_va; |
| 352 | #endif |
| 353 | |
| 354 | /* passed down from chip/board specific irq handlers */ |
| 355 | u8 int_usb; |
| 356 | u16 int_rx; |
| 357 | u16 int_tx; |
| 358 | |
| 359 | struct otg_transceiver xceiv; |
| 360 | |
| 361 | int nIrq; |
| 362 | |
| 363 | struct musb_hw_ep endpoints[MUSB_C_NUM_EPS]; |
| 364 | #define control_ep endpoints |
| 365 | |
| 366 | #define VBUSERR_RETRY_COUNT 3 |
| 367 | u16 vbuserr_retry; |
| 368 | u16 epmask; |
| 369 | u8 nr_endpoints; |
| 370 | |
| 371 | u8 board_mode; /* enum musb_mode */ |
| 372 | int (*board_set_power)(int state); |
| 373 | |
| 374 | int (*set_clock)(struct clk *clk, int is_active); |
| 375 | |
| 376 | u8 min_power; /* vbus for periph, in mA/2 */ |
| 377 | |
| 378 | bool is_host; |
| 379 | |
| 380 | int a_wait_bcon; /* VBUS timeout in msecs */ |
| 381 | unsigned long idle_timeout; /* Next timeout in jiffies */ |
| 382 | |
| 383 | /* active means connected and not suspended */ |
| 384 | unsigned is_active:1; |
| 385 | |
| 386 | unsigned is_multipoint:1; |
| 387 | unsigned ignore_disconnect:1; /* during bus resets */ |
| 388 | |
| 389 | #ifdef C_MP_TX |
| 390 | unsigned bulk_split:1; |
| 391 | #define can_bulk_split(musb,type) \ |
| 392 | (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) |
| 393 | #else |
| 394 | #define can_bulk_split(musb, type) 0 |
| 395 | #endif |
| 396 | |
| 397 | #ifdef C_MP_RX |
| 398 | unsigned bulk_combine:1; |
| 399 | #define can_bulk_combine(musb,type) \ |
| 400 | (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) |
| 401 | #else |
| 402 | #define can_bulk_combine(musb, type) 0 |
| 403 | #endif |
| 404 | |
| 405 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 406 | /* is_suspended means USB B_PERIPHERAL suspend */ |
| 407 | unsigned is_suspended:1; |
| 408 | |
| 409 | /* may_wakeup means remote wakeup is enabled */ |
| 410 | unsigned may_wakeup:1; |
| 411 | |
| 412 | /* is_self_powered is reported in device status and the |
| 413 | * config descriptor. is_bus_powered means B_PERIPHERAL |
| 414 | * draws some VBUS current; both can be true. |
| 415 | */ |
| 416 | unsigned is_self_powered:1; |
| 417 | unsigned is_bus_powered:1; |
| 418 | |
| 419 | unsigned set_address:1; |
| 420 | unsigned test_mode:1; |
| 421 | unsigned softconnect:1; |
| 422 | |
| 423 | u8 address; |
| 424 | u8 test_mode_nr; |
| 425 | u16 ackpend; /* ep0 */ |
| 426 | enum musb_g_ep0_state ep0_state; |
| 427 | struct usb_gadget g; /* the gadget */ |
| 428 | struct usb_gadget_driver *gadget_driver; /* its driver */ |
| 429 | #endif |
| 430 | |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame^] | 431 | struct musb_hdrc_config *config; |
| 432 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 433 | #ifdef MUSB_CONFIG_PROC_FS |
| 434 | struct proc_dir_entry *proc_entry; |
| 435 | #endif |
| 436 | }; |
| 437 | |
| 438 | static inline void musb_set_vbus(struct musb *musb, int is_on) |
| 439 | { |
| 440 | musb->board_set_vbus(musb, is_on); |
| 441 | } |
| 442 | |
| 443 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 444 | static inline struct musb *gadget_to_musb(struct usb_gadget *g) |
| 445 | { |
| 446 | return container_of(g, struct musb, g); |
| 447 | } |
| 448 | #endif |
| 449 | |
| 450 | |
| 451 | /***************************** Glue it together *****************************/ |
| 452 | |
| 453 | extern const char musb_driver_name[]; |
| 454 | |
| 455 | extern void musb_start(struct musb *musb); |
| 456 | extern void musb_stop(struct musb *musb); |
| 457 | |
| 458 | extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); |
| 459 | extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); |
| 460 | |
| 461 | extern void musb_load_testpacket(struct musb *); |
| 462 | |
| 463 | extern irqreturn_t musb_interrupt(struct musb *); |
| 464 | |
| 465 | extern void musb_platform_enable(struct musb *musb); |
| 466 | extern void musb_platform_disable(struct musb *musb); |
| 467 | |
| 468 | extern void musb_hnp_stop(struct musb *musb); |
| 469 | |
| 470 | extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode); |
| 471 | |
| 472 | #if defined(CONFIG_USB_TUSB6010) || \ |
| 473 | defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) |
| 474 | extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); |
| 475 | #else |
| 476 | #define musb_platform_try_idle(x, y) do {} while (0) |
| 477 | #endif |
| 478 | |
| 479 | #ifdef CONFIG_USB_TUSB6010 |
| 480 | extern int musb_platform_get_vbus_status(struct musb *musb); |
| 481 | #else |
| 482 | #define musb_platform_get_vbus_status(x) 0 |
| 483 | #endif |
| 484 | |
| 485 | extern int __init musb_platform_init(struct musb *musb); |
| 486 | extern int musb_platform_exit(struct musb *musb); |
| 487 | |
| 488 | /*-------------------------- ProcFS definitions ---------------------*/ |
| 489 | |
| 490 | struct proc_dir_entry; |
| 491 | |
| 492 | #if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS) |
| 493 | extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data); |
| 494 | extern void musb_debug_delete(char *name, struct musb *data); |
| 495 | |
| 496 | #else |
| 497 | static inline struct proc_dir_entry * |
| 498 | musb_debug_create(char *name, struct musb *data) |
| 499 | { |
| 500 | return NULL; |
| 501 | } |
| 502 | static inline void musb_debug_delete(char *name, struct musb *data) |
| 503 | { |
| 504 | } |
| 505 | #endif |
| 506 | |
| 507 | #endif /* __MUSB_CORE_H__ */ |