drivers/message/fusion/mptscsih.c

/*
 *  linux/drivers/message/fusion/mptscsih.c
 *      For use with LSI Logic PCI chip/adapter(s)
 *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
 *
 *  Copyright (c) 1999-2007 LSI Logic Corporation
 *  (mailto:mpt_linux_developer@lsil.com)
 *
 */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; version 2 of the License.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    NO WARRANTY
    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
    solely responsible for determining the appropriateness of using and
    distributing the Program and assumes all risks associated with its
    exercise of rights under this Agreement, including but not limited to
    the risks and costs of program errors, damage to or loss of data,
    programs or equipment, and unavailability or interruption of operations.

    DISCLAIMER OF LIABILITY
    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

#include "linux_compat.h"	/* linux-2.6 tweaks */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/delay.h>	/* for mdelay */
#include <linux/interrupt.h>	/* needed for in_interrupt() proto */
#include <linux/reboot.h>	/* notifier code */
#include <linux/sched.h>
#include <linux/workqueue.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_dbg.h>

#include "mptbase.h"
#include "mptscsih.h"
#include "lsi/mpi_log_sas.h"

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#define my_NAME		"Fusion MPT SCSI Host driver"
#define my_VERSION	MPT_LINUX_VERSION_COMMON
#define MYNAM		"mptscsih"

MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
MODULE_VERSION(my_VERSION);

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *  Other private/forward protos...
 */
int		mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static void	mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
int		mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);

static int	mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
				 SCSIIORequest_t *pReq, int req_idx);
static void	mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
static void	mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
static int	mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
static int	mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
static int	SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);

static int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);

int		mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int		mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);

int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);

void 		mptscsih_remove(struct pci_dev *);
void 		mptscsih_shutdown(struct pci_dev *);
#ifdef CONFIG_PM
int 		mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
int 		mptscsih_resume(struct pci_dev *pdev);
#endif

#define SNS_LEN(scp)	sizeof((scp)->sense_buffer)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_add_sge - Place a simple SGE at address pAddr.
 *	@pAddr: virtual address for SGE
 *	@flagslength: SGE flags and data transfer length
 *	@dma_addr: Physical address
 *
 *	This routine places a MPT request frame back on the MPT adapter's
 *	FreeQ.
 */
static inline void
mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
{
	if (sizeof(dma_addr_t) == sizeof(u64)) {
		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
		u32 tmp = dma_addr & 0xFFFFFFFF;

		pSge->FlagsLength = cpu_to_le32(flagslength);
		pSge->Address.Low = cpu_to_le32(tmp);
		tmp = (u32) ((u64)dma_addr >> 32);
		pSge->Address.High = cpu_to_le32(tmp);

	} else {
		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
		pSge->FlagsLength = cpu_to_le32(flagslength);
		pSge->Address = cpu_to_le32(dma_addr);
	}
} /* mptscsih_add_sge() */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_add_chain - Place a chain SGE at address pAddr.
 *	@pAddr: virtual address for SGE
 *	@next: nextChainOffset value (u32's)
 *	@length: length of next SGL segment
 *	@dma_addr: Physical address
 *
 *	This routine places a MPT request frame back on the MPT adapter's
 *	FreeQ.
 */
static inline void
mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
{
	if (sizeof(dma_addr_t) == sizeof(u64)) {
		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
		u32 tmp = dma_addr & 0xFFFFFFFF;

		pChain->Length = cpu_to_le16(length);
		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();

		pChain->NextChainOffset = next;

		pChain->Address.Low = cpu_to_le32(tmp);
		tmp = (u32) ((u64)dma_addr >> 32);
		pChain->Address.High = cpu_to_le32(tmp);
	} else {
		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
		pChain->Length = cpu_to_le16(length);
		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
		pChain->NextChainOffset = next;
		pChain->Address = cpu_to_le32(dma_addr);
	}
} /* mptscsih_add_chain() */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_getFreeChainBuffer - Function to get a free chain
 *	from the MPT_SCSI_HOST FreeChainQ.
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@req_idx: Index of the SCSI IO request frame. (output)
 *
 *	return SUCCESS or FAILED
 */
static inline int
mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
{
	MPT_FRAME_HDR *chainBuf;
	unsigned long flags;
	int rc;
	int chain_idx;

	dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer called\n",
			ioc->name));
	spin_lock_irqsave(&ioc->FreeQlock, flags);
	if (!list_empty(&ioc->FreeChainQ)) {
		int offset;

		chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
				u.frame.linkage.list);
		list_del(&chainBuf->u.frame.linkage.list);
		offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
		chain_idx = offset / ioc->req_sz;
		rc = SUCCESS;
		dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
			ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
	} else {
		rc = FAILED;
		chain_idx = MPT_HOST_NO_CHAIN;
		dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
			ioc->name));
	}
	spin_unlock_irqrestore(&ioc->FreeQlock, flags);

	*retIndex = chain_idx;
	return rc;
} /* mptscsih_getFreeChainBuffer() */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
 *	SCSIIORequest_t Message Frame.
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@SCpnt: Pointer to scsi_cmnd structure
 *	@pReq: Pointer to SCSIIORequest_t structure
 *
 *	Returns ...
 */
static int
mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
		SCSIIORequest_t *pReq, int req_idx)
{
	char 	*psge;
	char	*chainSge;
	struct scatterlist *sg;
	int	 frm_sz;
	int	 sges_left, sg_done;
	int	 chain_idx = MPT_HOST_NO_CHAIN;
	int	 sgeOffset;
	int	 numSgeSlots, numSgeThisFrame;
	u32	 sgflags, sgdir, thisxfer = 0;
	int	 chain_dma_off = 0;
	int	 newIndex;
	int	 ii;
	dma_addr_t v2;
	u32	RequestNB;

	sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
	if (sgdir == MPI_SCSIIO_CONTROL_WRITE)  {
		sgdir = MPT_TRANSFER_HOST_TO_IOC;
	} else {
		sgdir = MPT_TRANSFER_IOC_TO_HOST;
	}

	psge = (char *) &pReq->SGL;
	frm_sz = ioc->req_sz;

	/* Map the data portion, if any.
	 * sges_left  = 0 if no data transfer.
	 */
	if ( (sges_left = SCpnt->use_sg) ) {
		sges_left = pci_map_sg(ioc->pcidev,
			       (struct scatterlist *) SCpnt->request_buffer,
 			       SCpnt->use_sg,
			       SCpnt->sc_data_direction);
		if (sges_left == 0)
			return FAILED;
	} else if (SCpnt->request_bufflen) {
		SCpnt->SCp.dma_handle = pci_map_single(ioc->pcidev,
				      SCpnt->request_buffer,
				      SCpnt->request_bufflen,
				      SCpnt->sc_data_direction);
		dsgprintk((MYIOC_s_INFO_FMT "SG: non-SG for %p, len=%d\n",
				ioc->name, SCpnt, SCpnt->request_bufflen));
		mptscsih_add_sge((char *) &pReq->SGL,
			0xD1000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|SCpnt->request_bufflen,
			SCpnt->SCp.dma_handle);

		return SUCCESS;
	}

	/* Handle the SG case.
	 */
	sg = (struct scatterlist *) SCpnt->request_buffer;
	sg_done  = 0;
	sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
	chainSge = NULL;

	/* Prior to entering this loop - the following must be set
	 * current MF:  sgeOffset (bytes)
	 *              chainSge (Null if original MF is not a chain buffer)
	 *              sg_done (num SGE done for this MF)
	 */

nextSGEset:
	numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;

	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;

	/* Get first (num - 1) SG elements
	 * Skip any SG entries with a length of 0
	 * NOTE: at finish, sg and psge pointed to NEXT data/location positions
	 */
	for (ii=0; ii < (numSgeThisFrame-1); ii++) {
		thisxfer = sg_dma_len(sg);
		if (thisxfer == 0) {
			sg ++; /* Get next SG element from the OS */
			sg_done++;
			continue;
		}

		v2 = sg_dma_address(sg);
		mptscsih_add_sge(psge, sgflags | thisxfer, v2);

		sg++;		/* Get next SG element from the OS */
		psge += (sizeof(u32) + sizeof(dma_addr_t));
		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
		sg_done++;
	}

	if (numSgeThisFrame == sges_left) {
		/* Add last element, end of buffer and end of list flags.
		 */
		sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
				MPT_SGE_FLAGS_END_OF_BUFFER |
				MPT_SGE_FLAGS_END_OF_LIST;

		/* Add last SGE and set termination flags.
		 * Note: Last SGE may have a length of 0 - which should be ok.
		 */
		thisxfer = sg_dma_len(sg);

		v2 = sg_dma_address(sg);
		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
		/*
		sg++;
		psge += (sizeof(u32) + sizeof(dma_addr_t));
		*/
		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
		sg_done++;

		if (chainSge) {
			/* The current buffer is a chain buffer,
			 * but there is not another one.
			 * Update the chain element
			 * Offset and Length fields.
			 */
			mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
		} else {
			/* The current buffer is the original MF
			 * and there is no Chain buffer.
			 */
			pReq->ChainOffset = 0;
			RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
			dsgprintk((MYIOC_s_INFO_FMT
			    "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
			ioc->RequestNB[req_idx] = RequestNB;
		}
	} else {
		/* At least one chain buffer is needed.
		 * Complete the first MF
		 *  - last SGE element, set the LastElement bit
		 *  - set ChainOffset (words) for orig MF
		 *             (OR finish previous MF chain buffer)
		 *  - update MFStructPtr ChainIndex
		 *  - Populate chain element
		 * Also
		 * Loop until done.
		 */

		dsgprintk((MYIOC_s_INFO_FMT "SG: Chain Required! sg done %d\n",
				ioc->name, sg_done));

		/* Set LAST_ELEMENT flag for last non-chain element
		 * in the buffer. Since psge points at the NEXT
		 * SGE element, go back one SGE element, update the flags
		 * and reset the pointer. (Note: sgflags & thisxfer are already
		 * set properly).
		 */
		if (sg_done) {
			u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
			sgflags = le32_to_cpu(*ptmp);
			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
			*ptmp = cpu_to_le32(sgflags);
		}

		if (chainSge) {
			/* The current buffer is a chain buffer.
			 * chainSge points to the previous Chain Element.
			 * Update its chain element Offset and Length (must
			 * include chain element size) fields.
			 * Old chain element is now complete.
			 */
			u8 nextChain = (u8) (sgeOffset >> 2);
			sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
			mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
		} else {
			/* The original MF buffer requires a chain buffer -
			 * set the offset.
			 * Last element in this MF is a chain element.
			 */
			pReq->ChainOffset = (u8) (sgeOffset >> 2);
			RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
			dsgprintk((MYIOC_s_ERR_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
			ioc->RequestNB[req_idx] = RequestNB;
		}

		sges_left -= sg_done;


		/* NOTE: psge points to the beginning of the chain element
		 * in current buffer. Get a chain buffer.
		 */
		if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
			dfailprintk((MYIOC_s_INFO_FMT
			    "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
 			    ioc->name, pReq->CDB[0], SCpnt));
			return FAILED;
		}

		/* Update the tracking arrays.
		 * If chainSge == NULL, update ReqToChain, else ChainToChain
		 */
		if (chainSge) {
			ioc->ChainToChain[chain_idx] = newIndex;
		} else {
			ioc->ReqToChain[req_idx] = newIndex;
		}
		chain_idx = newIndex;
		chain_dma_off = ioc->req_sz * chain_idx;

		/* Populate the chainSGE for the current buffer.
		 * - Set chain buffer pointer to psge and fill
		 *   out the Address and Flags fields.
		 */
		chainSge = (char *) psge;
		dsgprintk((KERN_INFO "  Current buff @ %p (index 0x%x)",
				psge, req_idx));

		/* Start the SGE for the next buffer
		 */
		psge = (char *) (ioc->ChainBuffer + chain_dma_off);
		sgeOffset = 0;
		sg_done = 0;

		dsgprintk((KERN_INFO "  Chain buff @ %p (index 0x%x)\n",
				psge, chain_idx));

		/* Start the SGE for the next buffer
		 */

		goto nextSGEset;
	}

	return SUCCESS;
} /* mptscsih_AddSGE() */

static void
mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
    U32 SlotStatus)
{
	MPT_FRAME_HDR *mf;
	SEPRequest_t 	 *SEPMsg;

	if (ioc->bus_type == FC)
		return;

	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
		dfailprintk((MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
		    ioc->name,__FUNCTION__));
		return;
	}

	SEPMsg = (SEPRequest_t *)mf;
	SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
	SEPMsg->Bus = vtarget->channel;
	SEPMsg->TargetID = vtarget->id;
	SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
	SEPMsg->SlotStatus = SlotStatus;
	devtverboseprintk((MYIOC_s_WARN_FMT
	    "Sending SEP cmd=%x channel=%d id=%d\n",
	    ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
}

#ifdef MPT_DEBUG_REPLY
/**
 *	mptscsih_iocstatus_info_scsiio - IOCSTATUS information for SCSIIO
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@ioc_status: U32 IOCStatus word from IOC
 *	@scsi_status: U8 sam status from target
 *	@scsi_state: U8 scsi state
 *	@sc: original scsi cmnd pointer
 *	@mf: Pointer to MPT request frame
 *
 *	Refer to lsi/mpi.h.
 **/
static void
mptscsih_iocstatus_info_scsiio(MPT_ADAPTER *ioc, u32 ioc_status,
    u8 scsi_status, u8 scsi_state, struct scsi_cmnd *sc)
{
	char extend_desc[EVENT_DESCR_STR_SZ];
	char *desc = NULL;

	switch (ioc_status) {

	case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
		desc = "SCSI Invalid Bus";
		break;

	case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
		desc = "SCSI Invalid TargetID";
		break;

	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
		/*
		 * Inquiry is issued for device scanning
		 */
		if (sc->cmnd[0] != 0x12)
			desc = "SCSI Device Not There";
		break;

	case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
		desc = "SCSI Data Overrun";
		break;

	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
		desc = "SCSI I/O Data Error";
		break;

	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
		desc = "SCSI Protocol Error";
		break;

	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
		desc = "SCSI Task Terminated";
		break;

	case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
		desc = "SCSI Residual Mismatch";
		break;

	case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
		desc = "SCSI Task Management Failed";
		break;

	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
		desc = "SCSI IOC Terminated";
		break;

	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
		desc = "SCSI Ext Terminated";
		break;
	}

	if (!desc)
		return;

	snprintf(extend_desc, EVENT_DESCR_STR_SZ,
	    "[%d:%d:%d:%d] cmd=%02Xh, sam_status=%02Xh state=%02Xh",
		sc->device->host->host_no,
		sc->device->channel, sc->device->id, sc->device->lun,
		sc->cmnd[0], scsi_status, scsi_state);

	printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
	    ioc->name, ioc_status, desc, extend_desc);
}
#endif

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_io_done - Main SCSI IO callback routine registered to
 *	Fusion MPT (base) driver
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@mf: Pointer to original MPT request frame
 *	@r: Pointer to MPT reply frame (NULL if TurboReply)
 *
 *	This routine is called from mpt.c::mpt_interrupt() at the completion
 *	of any SCSI IO request.
 *	This routine is registered with the Fusion MPT (base) driver at driver
 *	load/init time via the mpt_register() API call.
 *
 *	Returns 1 indicating alloc'd request frame ptr should be freed.
 */
int
mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
{
	struct scsi_cmnd	*sc;
	MPT_SCSI_HOST	*hd;
	SCSIIORequest_t	*pScsiReq;
	SCSIIOReply_t	*pScsiReply;
	u16		 req_idx, req_idx_MR;
	VirtDevice	 *vdev;
	VirtTarget	 *vtarget;

	hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;

	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
	req_idx_MR = (mr != NULL) ?
	    le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
	if ((req_idx != req_idx_MR) ||
	    (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
		printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
		    ioc->name);
		printk (MYIOC_s_ERR_FMT
		    "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
		    ioc->name, req_idx, req_idx_MR, mf, mr,
		    hd->ScsiLookup[req_idx_MR]);
		return 0;
	}

	sc = hd->ScsiLookup[req_idx];
	hd->ScsiLookup[req_idx] = NULL;
	if (sc == NULL) {
		MPIHeader_t *hdr = (MPIHeader_t *)mf;

		/* Remark: writeSDP1 will use the ScsiDoneCtx
		 * If a SCSI I/O cmd, device disabled by OS and
		 * completion done. Cannot touch sc struct. Just free mem.
		 */
		if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
			printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
			ioc->name);

		mptscsih_freeChainBuffers(ioc, req_idx);
		return 1;
	}

	if ((unsigned char *)mf != sc->host_scribble) {
		mptscsih_freeChainBuffers(ioc, req_idx);
		return 1;
	}

	sc->host_scribble = NULL;
	sc->result = DID_OK << 16;		/* Set default reply as OK */
	pScsiReq = (SCSIIORequest_t *) mf;
	pScsiReply = (SCSIIOReply_t *) mr;

	if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
		dmfprintk((MYIOC_s_INFO_FMT
			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
			ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
	}else{
		dmfprintk((MYIOC_s_INFO_FMT
			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
			ioc->name, mf, mr, sc, req_idx));
	}

	if (pScsiReply == NULL) {
		/* special context reply handling */
		;
	} else {
		u32	 xfer_cnt;
		u16	 status;
		u8	 scsi_state, scsi_status;
		u32	 log_info;

		status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
		scsi_state = pScsiReply->SCSIState;
		scsi_status = pScsiReply->SCSIStatus;
		xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
		sc->resid = sc->request_bufflen - xfer_cnt;
		log_info = le32_to_cpu(pScsiReply->IOCLogInfo);

		/*
		 *  if we get a data underrun indication, yet no data was
		 *  transferred and the SCSI status indicates that the
		 *  command was never started, change the data underrun
		 *  to success
		 */
		if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
		    (scsi_status == MPI_SCSI_STATUS_BUSY ||
		     scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
		     scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
			status = MPI_IOCSTATUS_SUCCESS;
		}

		if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
			mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);

		/*
		 *  Look for + dump FCP ResponseInfo[]!
		 */
		if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
		    pScsiReply->ResponseInfo) {
			printk(KERN_NOTICE "[%d:%d:%d:%d] "
			"FCP_ResponseInfo=%08xh\n",
			sc->device->host->host_no, sc->device->channel,
			sc->device->id, sc->device->lun,
			le32_to_cpu(pScsiReply->ResponseInfo));
		}

		switch(status) {
		case MPI_IOCSTATUS_BUSY:			/* 0x0002 */
			/* CHECKME!
			 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
			 * But not: DID_BUS_BUSY lest one risk
			 * killing interrupt handler:-(
			 */
			sc->result = SAM_STAT_BUSY;
			break;

		case MPI_IOCSTATUS_SCSI_INVALID_BUS:		/* 0x0041 */
		case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:	/* 0x0042 */
			sc->result = DID_BAD_TARGET << 16;
			break;

		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
			/* Spoof to SCSI Selection Timeout! */
			if (ioc->bus_type != FC)
				sc->result = DID_NO_CONNECT << 16;
			/* else fibre, just stall until rescan event */
			else
				sc->result = DID_REQUEUE << 16;

			if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
				hd->sel_timeout[pScsiReq->TargetID]++;

			vdev = sc->device->hostdata;
			if (!vdev)
				break;
			vtarget = vdev->vtarget;
			if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
				mptscsih_issue_sep_command(ioc, vtarget,
				    MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
				vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
			}
			break;

		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
			if ( ioc->bus_type == SAS ) {
				u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus);
				if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
					if ((log_info & SAS_LOGINFO_MASK)
					    == SAS_LOGINFO_NEXUS_LOSS) {
						sc->result = (DID_BUS_BUSY << 16);
						break;
					}
				}
			} else if (ioc->bus_type == FC) {
				/*
				 * The FC IOC may kill a request for variety of
				 * reasons, some of which may be recovered by a
				 * retry, some which are unlikely to be
				 * recovered. Return DID_ERROR instead of
				 * DID_RESET to permit retry of the command,
				 * just not an infinite number of them
				 */
				sc->result = DID_ERROR << 16;
				break;
			}

			/*
			 * Allow non-SAS & non-NEXUS_LOSS to drop into below code
			 */

		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
			/* Linux handles an unsolicited DID_RESET better
			 * than an unsolicited DID_ABORT.
			 */
			sc->result = DID_RESET << 16;

			break;

		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
			sc->resid = sc->request_bufflen - xfer_cnt;
			if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
				sc->result=DID_SOFT_ERROR << 16;
			else /* Sufficient data transfer occurred */
				sc->result = (DID_OK << 16) | scsi_status;
			dreplyprintk((KERN_NOTICE
			    "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
			    sc->result, sc->device->channel, sc->device->id));
			break;

		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
			/*
			 *  Do upfront check for valid SenseData and give it
			 *  precedence!
			 */
			sc->result = (DID_OK << 16) | scsi_status;
			if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
				/* Have already saved the status and sense data
				 */
				;
			} else {
				if (xfer_cnt < sc->underflow) {
					if (scsi_status == SAM_STAT_BUSY)
						sc->result = SAM_STAT_BUSY;
					else
						sc->result = DID_SOFT_ERROR << 16;
				}
				if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
					/* What to do?
				 	*/
					sc->result = DID_SOFT_ERROR << 16;
				}
				else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
					/*  Not real sure here either...  */
					sc->result = DID_RESET << 16;
				}
			}

			dreplyprintk((KERN_NOTICE "  sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
					sc->underflow));
			dreplyprintk((KERN_NOTICE "  ActBytesXferd=%02xh\n", xfer_cnt));
			/* Report Queue Full
			 */
			if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
				mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);

			break;

		case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:		/* 0x0044 */
			sc->resid=0;
		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
			if (scsi_status == MPI_SCSI_STATUS_BUSY)
				sc->result = (DID_BUS_BUSY << 16) | scsi_status;
			else
				sc->result = (DID_OK << 16) | scsi_status;
			if (scsi_state == 0) {
				;
			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
				/*
				 * If running against circa 200003dd 909 MPT f/w,
				 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
				 * (QUEUE_FULL) returned from device! --> get 0x0000?128
				 * and with SenseBytes set to 0.
				 */
				if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
					mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);

			}
			else if (scsi_state &
			         (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
			   ) {
				/*
				 * What to do?
				 */
				sc->result = DID_SOFT_ERROR << 16;
			}
			else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
				/*  Not real sure here either...  */
				sc->result = DID_RESET << 16;
			}
			else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
				/* Device Inq. data indicates that it supports
				 * QTags, but rejects QTag messages.
				 * This command completed OK.
				 *
				 * Not real sure here either so do nothing...  */
			}

			if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
				mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);

			/* Add handling of:
			 * Reservation Conflict, Busy,
			 * Command Terminated, CHECK
			 */
			break;

		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
			sc->result = DID_SOFT_ERROR << 16;
			break;

		case MPI_IOCSTATUS_INVALID_FUNCTION:		/* 0x0001 */
		case MPI_IOCSTATUS_INVALID_SGL:			/* 0x0003 */
		case MPI_IOCSTATUS_INTERNAL_ERROR:		/* 0x0004 */
		case MPI_IOCSTATUS_RESERVED:			/* 0x0005 */
		case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:	/* 0x0006 */
		case MPI_IOCSTATUS_INVALID_FIELD:		/* 0x0007 */
		case MPI_IOCSTATUS_INVALID_STATE:		/* 0x0008 */
		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
		case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:	/* 0x004A */
		default:
			/*
			 * What to do?
			 */
			sc->result = DID_SOFT_ERROR << 16;
			break;

		}	/* switch(status) */

#ifdef MPT_DEBUG_REPLY
		if (sc->result) {

			mptscsih_iocstatus_info_scsiio(ioc, status,
			    scsi_status, scsi_state, sc);

			dreplyprintk(("%s: [%d:%d:%d:%d] cmd=0x%02x "
			    "result=0x%08x\n\tiocstatus=0x%04X "
			    "scsi_state=0x%02X scsi_status=0x%02X "
			    "loginfo=0x%08X\n", __FUNCTION__,
			    sc->device->host->host_no, sc->device->channel, sc->device->id,
			    sc->device->lun, sc->cmnd[0], sc->result, status,
			    scsi_state, scsi_status, log_info));

			dreplyprintk(("%s: [%d:%d:%d:%d] resid=%d "
			    "bufflen=%d xfer_cnt=%d\n", __FUNCTION__,
			    sc->device->host->host_no, sc->device->channel, sc->device->id,
			    sc->device->lun, sc->resid, sc->request_bufflen,
			    xfer_cnt));
		}
#endif

	} /* end of address reply case */

	/* Unmap the DMA buffers, if any. */
	if (sc->use_sg) {
		pci_unmap_sg(ioc->pcidev, (struct scatterlist *) sc->request_buffer,
			    sc->use_sg, sc->sc_data_direction);
	} else if (sc->request_bufflen) {
		pci_unmap_single(ioc->pcidev, sc->SCp.dma_handle,
				sc->request_bufflen, sc->sc_data_direction);
	}

	sc->scsi_done(sc);		/* Issue the command callback */

	/* Free Chain buffers */
	mptscsih_freeChainBuffers(ioc, req_idx);
	return 1;
}

/*
 *	mptscsih_flush_running_cmds - For each command found, search
 *		Scsi_Host instance taskQ and reply to OS.
 *		Called only if recovering from a FW reload.
 *	@hd: Pointer to a SCSI HOST structure
 *
 *	Returns: None.
 *
 *	Must be called while new I/Os are being queued.
 */
static void
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
{
	MPT_ADAPTER *ioc = hd->ioc;
	struct scsi_cmnd	*SCpnt;
	MPT_FRAME_HDR	*mf;
	int		 ii;
	int		 max = ioc->req_depth;

	dprintk((KERN_INFO MYNAM ": flush_ScsiLookup called\n"));
	for (ii= 0; ii < max; ii++) {
		if ((SCpnt = hd->ScsiLookup[ii]) != NULL) {

			/* Command found.
			 */

			/* Null ScsiLookup index
			 */
			hd->ScsiLookup[ii] = NULL;

			mf = MPT_INDEX_2_MFPTR(ioc, ii);
			dmfprintk(( "flush: ScsiDone (mf=%p,sc=%p)\n",
					mf, SCpnt));

			/* Free Chain buffers */
			mptscsih_freeChainBuffers(ioc, ii);

			/* Free Message frames */
			mpt_free_msg_frame(ioc, mf);

			if ((unsigned char *)mf != SCpnt->host_scribble)
				continue;

			/* Set status, free OS resources (SG DMA buffers)
			 * Do OS callback
			 */
			if (SCpnt->use_sg) {
				pci_unmap_sg(ioc->pcidev,
					(struct scatterlist *) SCpnt->request_buffer,
					SCpnt->use_sg,
					SCpnt->sc_data_direction);
			} else if (SCpnt->request_bufflen) {
				pci_unmap_single(ioc->pcidev,
					SCpnt->SCp.dma_handle,
					SCpnt->request_bufflen,
					SCpnt->sc_data_direction);
			}
			SCpnt->result = DID_RESET << 16;
			SCpnt->host_scribble = NULL;

			SCpnt->scsi_done(SCpnt);	/* Issue the command callback */
		}
	}

	return;
}

/*
 *	mptscsih_search_running_cmds - Delete any commands associated
 *		with the specified target and lun. Function called only
 *		when a lun is disable by mid-layer.
 *		Do NOT access the referenced scsi_cmnd structure or
 *		members. Will cause either a paging or NULL ptr error.
 *		(BUT, BUT, BUT, the code does reference it! - mdr)
 *      @hd: Pointer to a SCSI HOST structure
 *	@vdevice: per device private data
 *
 *	Returns: None.
 *
 *	Called from slave_destroy.
 */
static void
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
{
	SCSIIORequest_t	*mf = NULL;
	int		 ii;
	int		 max = hd->ioc->req_depth;
	struct scsi_cmnd *sc;
	struct scsi_lun  lun;

	dsprintk((KERN_INFO MYNAM ": search_running channel %d id %d lun %d max %d\n",
	    vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, max));

	for (ii=0; ii < max; ii++) {
		if ((sc = hd->ScsiLookup[ii]) != NULL) {

			mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
			if (mf == NULL)
				continue;
			int_to_scsilun(vdevice->lun, &lun);
			if ((mf->Bus != vdevice->vtarget->channel) ||
			    (mf->TargetID != vdevice->vtarget->id) ||
			    memcmp(lun.scsi_lun, mf->LUN, 8))
				continue;
			dsprintk(( "search_running: found (sc=%p, mf = %p) "
			    "channel %d id %d, lun %d \n", hd->ScsiLookup[ii],
			    mf, mf->Bus, mf->TargetID, vdevice->lun));

			/* Cleanup
			 */
			hd->ScsiLookup[ii] = NULL;
			mptscsih_freeChainBuffers(hd->ioc, ii);
			mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
			if ((unsigned char *)mf != sc->host_scribble)
				continue;
			if (sc->use_sg) {
				pci_unmap_sg(hd->ioc->pcidev,
				(struct scatterlist *) sc->request_buffer,
					sc->use_sg,
					sc->sc_data_direction);
			} else if (sc->request_bufflen) {
				pci_unmap_single(hd->ioc->pcidev,
					sc->SCp.dma_handle,
					sc->request_bufflen,
					sc->sc_data_direction);
			}
			sc->host_scribble = NULL;
			sc->result = DID_NO_CONNECT << 16;
			sc->scsi_done(sc);
		}
	}
	return;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_report_queue_full - Report QUEUE_FULL status returned
 *	from a SCSI target device.
 *	@sc: Pointer to scsi_cmnd structure
 *	@pScsiReply: Pointer to SCSIIOReply_t
 *	@pScsiReq: Pointer to original SCSI request
 *
 *	This routine periodically reports QUEUE_FULL status returned from a
 *	SCSI target device.  It reports this to the console via kernel
 *	printk() API call, not more than once every 10 seconds.
 */
static void
mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
{
	long time = jiffies;
	MPT_SCSI_HOST		*hd;

	if (sc->device == NULL)
		return;
	if (sc->device->host == NULL)
		return;
	if ((hd = (MPT_SCSI_HOST *)sc->device->host->hostdata) == NULL)
		return;

	if (time - hd->last_queue_full > 10 * HZ) {
		dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n",
				hd->ioc->name, 0, sc->device->id, sc->device->lun));
		hd->last_queue_full = time;
	}
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_remove - Removed scsi devices
 *	@pdev: Pointer to pci_dev structure
 *
 *
 */
void
mptscsih_remove(struct pci_dev *pdev)
{
	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
	struct Scsi_Host 	*host = ioc->sh;
	MPT_SCSI_HOST		*hd;
	int sz1;

	if(!host) {
		mpt_detach(pdev);
		return;
	}

	scsi_remove_host(host);

	if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL)
		return;

	mptscsih_shutdown(pdev);

	sz1=0;

	if (hd->ScsiLookup != NULL) {
		sz1 = hd->ioc->req_depth * sizeof(void *);
		kfree(hd->ScsiLookup);
		hd->ScsiLookup = NULL;
	}

	dprintk((MYIOC_s_INFO_FMT
	    "Free'd ScsiLookup (%d) memory\n",
	    hd->ioc->name, sz1));

	kfree(hd->info_kbuf);

	/* NULL the Scsi_Host pointer
	 */
	hd->ioc->sh = NULL;

	scsi_host_put(host);

	mpt_detach(pdev);

}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_shutdown - reboot notifier
 *
 */
void
mptscsih_shutdown(struct pci_dev *pdev)
{
	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
	struct Scsi_Host 	*host = ioc->sh;
	MPT_SCSI_HOST		*hd;

	if(!host)
		return;

	hd = (MPT_SCSI_HOST *)host->hostdata;

}

#ifdef CONFIG_PM
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_suspend - Fusion MPT scsi driver suspend routine.
 *
 *
 */
int
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
	mptscsih_shutdown(pdev);
	return mpt_suspend(pdev,state);
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_resume - Fusion MPT scsi driver resume routine.
 *
 *
 */
int
mptscsih_resume(struct pci_dev *pdev)
{
	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
	struct Scsi_Host 	*host = ioc->sh;
	MPT_SCSI_HOST		*hd;

	mpt_resume(pdev);

	if(!host)
		return 0;

	hd = (MPT_SCSI_HOST *)host->hostdata;
	if(!hd)
		return 0;

	return 0;
}

#endif

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_info - Return information about MPT adapter
 *	@SChost: Pointer to Scsi_Host structure
 *
 *	(linux scsi_host_template.info routine)
 *
 *	Returns pointer to buffer where information was written.
 */
const char *
mptscsih_info(struct Scsi_Host *SChost)
{
	MPT_SCSI_HOST *h;
	int size = 0;

	h = (MPT_SCSI_HOST *)SChost->hostdata;

	if (h) {
		if (h->info_kbuf == NULL)
			if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
				return h->info_kbuf;
		h->info_kbuf[0] = '\0';

		mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
		h->info_kbuf[size-1] = '\0';
	}

	return h->info_kbuf;
}

struct info_str {
	char *buffer;
	int   length;
	int   offset;
	int   pos;
};

static void
mptscsih_copy_mem_info(struct info_str *info, char *data, int len)
{
	if (info->pos + len > info->length)
		len = info->length - info->pos;

	if (info->pos + len < info->offset) {
		info->pos += len;
		return;
	}

	if (info->pos < info->offset) {
	        data += (info->offset - info->pos);
	        len  -= (info->offset - info->pos);
	}

	if (len > 0) {
                memcpy(info->buffer + info->pos, data, len);
                info->pos += len;
	}
}

static int
mptscsih_copy_info(struct info_str *info, char *fmt, ...)
{
	va_list args;
	char buf[81];
	int len;

	va_start(args, fmt);
	len = vsprintf(buf, fmt, args);
	va_end(args);

	mptscsih_copy_mem_info(info, buf, len);
	return len;
}

static int
mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len)
{
	struct info_str info;

	info.buffer	= pbuf;
	info.length	= len;
	info.offset	= offset;
	info.pos	= 0;

	mptscsih_copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name);
	mptscsih_copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
	mptscsih_copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts);
	mptscsih_copy_info(&info, "MaxQ=%d\n", ioc->req_depth);

	return ((info.pos > info.offset) ? info.pos - info.offset : 0);
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_proc_info - Return information about MPT adapter
 * 	@host:   scsi host struct
 * 	@buffer: if write, user data; if read, buffer for user
 *	@start: returns the buffer address
 * 	@offset: if write, 0; if read, the current offset into the buffer from
 * 		 the previous read.
 * 	@length: if write, return length;
 *	@func:   write = 1; read = 0
 *
 *	(linux scsi_host_template.info routine)
 */
int
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
			int length, int func)
{
	MPT_SCSI_HOST	*hd = (MPT_SCSI_HOST *)host->hostdata;
	MPT_ADAPTER	*ioc = hd->ioc;
	int size = 0;

	if (func) {
		/*
		 * write is not supported
		 */
	} else {
		if (start)
			*start = buffer;

		size = mptscsih_host_info(ioc, buffer, offset, length);
	}

	return size;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#define ADD_INDEX_LOG(req_ent)	do { } while(0)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
 *	@SCpnt: Pointer to scsi_cmnd structure
 *	@done: Pointer SCSI mid-layer IO completion function
 *
 *	(linux scsi_host_template.queuecommand routine)
 *	This is the primary SCSI IO start routine.  Create a MPI SCSIIORequest
 *	from a linux scsi_cmnd request and send it to the IOC.
 *
 *	Returns 0. (rtn value discarded by linux scsi mid-layer)
 */
int
mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
	MPT_SCSI_HOST		*hd;
	MPT_FRAME_HDR		*mf;
	SCSIIORequest_t		*pScsiReq;
	VirtDevice		*vdev = SCpnt->device->hostdata;
	int	 lun;
	u32	 datalen;
	u32	 scsictl;
	u32	 scsidir;
	u32	 cmd_len;
	int	 my_idx;
	int	 ii;

	hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata;
	lun = SCpnt->device->lun;
	SCpnt->scsi_done = done;

	dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n",
			(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done));

	if (hd->resetPending) {
		dtmprintk((MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
			(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt));
		return SCSI_MLQUEUE_HOST_BUSY;
	}

	/*
	 *  Put together a MPT SCSI request...
	 */
	if ((mf = mpt_get_msg_frame(hd->ioc->DoneCtx, hd->ioc)) == NULL) {
		dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
				hd->ioc->name));
		return SCSI_MLQUEUE_HOST_BUSY;
	}

	pScsiReq = (SCSIIORequest_t *) mf;

	my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);

	ADD_INDEX_LOG(my_idx);

	/*    TUR's being issued with scsictl=0x02000000 (DATA_IN)!
	 *    Seems we may receive a buffer (datalen>0) even when there
	 *    will be no data transfer!  GRRRRR...
	 */
	if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
		datalen = SCpnt->request_bufflen;
		scsidir = MPI_SCSIIO_CONTROL_READ;	/* DATA IN  (host<--ioc<--dev) */
	} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
		datalen = SCpnt->request_bufflen;
		scsidir = MPI_SCSIIO_CONTROL_WRITE;	/* DATA OUT (host-->ioc-->dev) */
	} else {
		datalen = 0;
		scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
	}

	/* Default to untagged. Once a target structure has been allocated,
	 * use the Inquiry data to determine if device supports tagged.
	 */
	if (vdev
	    && (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
	    && (SCpnt->device->tagged_supported)) {
		scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
	} else {
		scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
	}

	/* Use the above information to set up the message frame
	 */
	pScsiReq->TargetID = (u8) vdev->vtarget->id;
	pScsiReq->Bus = vdev->vtarget->channel;
	pScsiReq->ChainOffset = 0;
	if (vdev->vtarget->tflags &  MPT_TARGET_FLAGS_RAID_COMPONENT)
		pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
	else
		pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
	pScsiReq->CDBLength = SCpnt->cmd_len;
	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
	pScsiReq->Reserved = 0;
	pScsiReq->MsgFlags = mpt_msg_flags();
	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
	pScsiReq->Control = cpu_to_le32(scsictl);

	/*
	 *  Write SCSI CDB into the message
	 */
	cmd_len = SCpnt->cmd_len;
	for (ii=0; ii < cmd_len; ii++)
		pScsiReq->CDB[ii] = SCpnt->cmnd[ii];

	for (ii=cmd_len; ii < 16; ii++)
		pScsiReq->CDB[ii] = 0;

	/* DataLength */
	pScsiReq->DataLength = cpu_to_le32(datalen);

	/* SenseBuffer low address */
	pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));

	/* Now add the SG list
	 * Always have a SGE even if null length.
	 */
	if (datalen == 0) {
		/* Add a NULL SGE */
		mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
			(dma_addr_t) -1);
	} else {
		/* Add a 32 or 64 bit SGE */
		if (mptscsih_AddSGE(hd->ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
			goto fail;
	}

	SCpnt->host_scribble = (unsigned char *)mf;
	hd->ScsiLookup[my_idx] = SCpnt;

	mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
	dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
			hd->ioc->name, SCpnt, mf, my_idx));
	DBG_DUMP_REQUEST_FRAME(mf)
	return 0;

 fail:
	hd->ScsiLookup[my_idx] = NULL;
	mptscsih_freeChainBuffers(hd->ioc, my_idx);
	mpt_free_msg_frame(hd->ioc, mf);
	return SCSI_MLQUEUE_HOST_BUSY;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_freeChainBuffers - Function to free chain buffers associated
 *	with a SCSI IO request
 *	@hd: Pointer to the MPT_SCSI_HOST instance
 *	@req_idx: Index of the SCSI IO request frame.
 *
 *	Called if SG chain buffer allocation fails and mptscsih callbacks.
 *	No return.
 */
static void
mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
{
	MPT_FRAME_HDR *chain;
	unsigned long flags;
	int chain_idx;
	int next;

	/* Get the first chain index and reset
	 * tracker state.
	 */
	chain_idx = ioc->ReqToChain[req_idx];
	ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;

	while (chain_idx != MPT_HOST_NO_CHAIN) {

		/* Save the next chain buffer index */
		next = ioc->ChainToChain[chain_idx];

		/* Free this chain buffer and reset
		 * tracker
		 */
		ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;

		chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
					+ (chain_idx * ioc->req_sz));

		spin_lock_irqsave(&ioc->FreeQlock, flags);
		list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
		spin_unlock_irqrestore(&ioc->FreeQlock, flags);

		dmfprintk((MYIOC_s_INFO_FMT "FreeChainBuffers (index %d)\n",
				ioc->name, chain_idx));

		/* handle next */
		chain_idx = next;
	}
	return;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	Reset Handling
 */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
 *	Fall through to mpt_HardResetHandler if: not operational, too many
 *	failed TM requests or handshake failure.
 *
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@type: Task Management type
 *	@id: Logical Target ID for reset (if appropriate)
 *	@lun: Logical Unit for reset (if appropriate)
 *	@ctx2abort: Context for the task to be aborted (if appropriate)
 *
 *	Remark: Currently invoked from a non-interrupt thread (_bh).
 *
 *	Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
 *	will be active.
 *
 *	Returns 0 for SUCCESS, or FAILED.
 **/
int
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
{
	MPT_ADAPTER	*ioc;
	int		 rc = -1;
	u32		 ioc_raw_state;
	unsigned long	 flags;

	ioc = hd->ioc;
	dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name));

	// SJR - CHECKME - Can we avoid this here?
	// (mpt_HardResetHandler has this check...)
	spin_lock_irqsave(&ioc->diagLock, flags);
	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
		spin_unlock_irqrestore(&ioc->diagLock, flags);
		return FAILED;
	}
	spin_unlock_irqrestore(&ioc->diagLock, flags);

	/*  Wait a fixed amount of time for the TM pending flag to be cleared.
	 *  If we time out and not bus reset, then we return a FAILED status
	 *  to the caller.
	 *  The call to mptscsih_tm_pending_wait() will set the pending flag
	 *  if we are
	 *  successful. Otherwise, reload the FW.
	 */
	if (mptscsih_tm_pending_wait(hd) == FAILED) {
		if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
			   "Timed out waiting for last TM (%d) to complete! \n",
			   hd->ioc->name, hd->tmPending));
			return FAILED;
		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target "
				"reset: Timed out waiting for last TM (%d) "
				"to complete! \n", hd->ioc->name,
				hd->tmPending));
			return FAILED;
		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
			   "Timed out waiting for last TM (%d) to complete! \n",
			   hd->ioc->name, hd->tmPending));
			return FAILED;
		}
	} else {
		spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
		hd->tmPending |=  (1 << type);
		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
	}

	ioc_raw_state = mpt_GetIocState(hd->ioc, 0);

	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
		printk(MYIOC_s_WARN_FMT
			"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
			ioc->name, type, ioc_raw_state);
		printk(KERN_WARNING " Issuing HardReset!!\n");
		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
			printk((KERN_WARNING "TMHandler: HardReset "
				"FAILED!!\n"));
		return FAILED;
	}

	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
		printk(MYIOC_s_WARN_FMT
			"TM Handler for type=%x: ioc_state: "
			"DOORBELL_ACTIVE (0x%x)!\n",
			ioc->name, type, ioc_raw_state);
		return FAILED;
	}

	/* Isse the Task Mgmt request.
	 */
	if (hd->hard_resets < -1)
		hd->hard_resets++;

	rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
	    ctx2abort, timeout);
	if (rc)
		printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
		       hd->ioc->name);
	else
		dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n",
			   hd->ioc->name));

	dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc));

	return rc;
}


/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
 *	@hd: Pointer to MPT_SCSI_HOST structure
 *	@type: Task Management type
 *	@id: Logical Target ID for reset (if appropriate)
 *	@lun: Logical Unit for reset (if appropriate)
 *	@ctx2abort: Context for the task to be aborted (if appropriate)
 *
 *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
 *	or a non-interrupt thread.  In the former, must not call schedule().
 *
 *	Not all fields are meaningfull for all task types.
 *
 *	Returns 0 for SUCCESS, or FAILED.
 *
 **/
static int
mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
{
	MPT_FRAME_HDR	*mf;
	SCSITaskMgmt_t	*pScsiTm;
	int		 ii;
	int		 retval;

	/* Return Fail to calling function if no message frames available.
	 */
	if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
		dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
				hd->ioc->name));
		return FAILED;
	}
	dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
			hd->ioc->name, mf));

	/* Format the Request
	 */
	pScsiTm = (SCSITaskMgmt_t *) mf;
	pScsiTm->TargetID = id;
	pScsiTm->Bus = channel;
	pScsiTm->ChainOffset = 0;
	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;

	pScsiTm->Reserved = 0;
	pScsiTm->TaskType = type;
	pScsiTm->Reserved1 = 0;
	pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
                    ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;

	int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);

	for (ii=0; ii < 7; ii++)
		pScsiTm->Reserved2[ii] = 0;

	pScsiTm->TaskMsgContext = ctx2abort;

	dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
		"type=%d\n", hd->ioc->name, ctx2abort, type));

	DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);

	if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc,
		sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) {
		dfailprintk((MYIOC_s_ERR_FMT "send_handshake FAILED!"
			" (hd %p, ioc %p, mf %p, rc=%d) \n", hd->ioc->name, hd,
			hd->ioc, mf, retval));
		goto fail_out;
	}

	if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
		dfailprintk((MYIOC_s_ERR_FMT "task management request TIMED OUT!"
			" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
			hd->ioc, mf));
		dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
			 hd->ioc->name));
		retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
		dtmprintk((MYIOC_s_INFO_FMT "rc=%d \n",
			 hd->ioc->name, retval));
		goto fail_out;
	}

	/*
	 * Handle success case, see if theres a non-zero ioc_status.
	 */
	if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
		retval = 0;
	else
		retval = FAILED;

	return retval;

 fail_out:

	/*
	 * Free task managment mf, and corresponding tm flags
	 */
	mpt_free_msg_frame(hd->ioc, mf);
	hd->tmPending = 0;
	hd->tmState = TM_STATE_NONE;
	return FAILED;
}

static int
mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
{
	switch (ioc->bus_type) {
	case FC:
		return 40;
	case SAS:
		return 10;
	case SPI:
	default:
		return 2;
	}
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
 *	@SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
 *
 *	(linux scsi_host_template.eh_abort_handler routine)
 *
 *	Returns SUCCESS or FAILED.
 **/
int
mptscsih_abort(struct scsi_cmnd * SCpnt)
{
	MPT_SCSI_HOST	*hd;
	MPT_FRAME_HDR	*mf;
	u32		 ctx2abort;
	int		 scpnt_idx;
	int		 retval;
	VirtDevice	 *vdev;
	ulong	 	 sn = SCpnt->serial_number;

	/* If we can't locate our host adapter structure, return FAILED status.
	 */
	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
		SCpnt->result = DID_RESET << 16;
		SCpnt->scsi_done(SCpnt);
		dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
			   "Can't locate host! (sc=%p)\n",
			   SCpnt));
		return FAILED;
	}

	/* Find this command
	 */
	if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
		/* Cmd not found in ScsiLookup.
		 * Do OS callback.
		 */
		SCpnt->result = DID_RESET << 16;
		dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
			   "Command not in the active list! (sc=%p)\n",
			   hd->ioc->name, SCpnt));
		return SUCCESS;
	}

	if (hd->resetPending)
		return FAILED;

	if (hd->timeouts < -1)
		hd->timeouts++;

	printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
	       hd->ioc->name, SCpnt);
	scsi_print_command(SCpnt);

	/* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
	 * (the IO to be ABORT'd)
	 *
	 * NOTE: Since we do not byteswap MsgContext, we do not
	 *	 swap it here either.  It is an opaque cookie to
	 *	 the controller, so it does not matter. -DaveM
	 */
	mf = MPT_INDEX_2_MFPTR(hd->ioc, scpnt_idx);
	ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;

	hd->abortSCpnt = SCpnt;

	vdev = SCpnt->device->hostdata;
	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
		vdev->vtarget->channel, vdev->vtarget->id, vdev->lun,
		ctx2abort, mptscsih_get_tm_timeout(hd->ioc));

	if (SCPNT_TO_LOOKUP_IDX(SCpnt) == scpnt_idx &&
	    SCpnt->serial_number == sn)
		retval = FAILED;

	printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
		hd->ioc->name,
		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);

	if (retval == 0)
		return SUCCESS;
	else
		return FAILED;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_dev_reset - Perform a SCSI TARGET_RESET!  new_eh variant
 *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
 *
 *	(linux scsi_host_template.eh_dev_reset_handler routine)
 *
 *	Returns SUCCESS or FAILED.
 **/
int
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
{
	MPT_SCSI_HOST	*hd;
	int		 retval;
	VirtDevice	 *vdev;

	/* If we can't locate our host adapter structure, return FAILED status.
	 */
	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
		dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
			   "Can't locate host! (sc=%p)\n",
			   SCpnt));
		return FAILED;
	}

	if (hd->resetPending)
		return FAILED;

	printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
	       hd->ioc->name, SCpnt);
	scsi_print_command(SCpnt);

	vdev = SCpnt->device->hostdata;
	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
		vdev->vtarget->channel, vdev->vtarget->id,
		0, 0, mptscsih_get_tm_timeout(hd->ioc));

	printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
		hd->ioc->name,
		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);

	if (retval == 0)
		return SUCCESS;
	else
		return FAILED;
}


/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_bus_reset - Perform a SCSI BUS_RESET!	new_eh variant
 *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
 *
 *	(linux scsi_host_template.eh_bus_reset_handler routine)
 *
 *	Returns SUCCESS or FAILED.
 **/
int
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
{
	MPT_SCSI_HOST	*hd;
	int		 retval;
	VirtDevice	 *vdev;

	/* If we can't locate our host adapter structure, return FAILED status.
	 */
	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
		dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
			   "Can't locate host! (sc=%p)\n",
			   SCpnt ) );
		return FAILED;
	}

	printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
	       hd->ioc->name, SCpnt);
	scsi_print_command(SCpnt);

	if (hd->timeouts < -1)
		hd->timeouts++;

	vdev = SCpnt->device->hostdata;
	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
		vdev->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));

	printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
		hd->ioc->name,
		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);

	if (retval == 0)
		return SUCCESS;
	else
		return FAILED;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
 *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
 *
 *	(linux scsi_host_template.eh_host_reset_handler routine)
 *
 *	Returns SUCCESS or FAILED.
 */
int
mptscsih_host_reset(struct scsi_cmnd *SCpnt)
{
	MPT_SCSI_HOST *  hd;
	int              status = SUCCESS;

	/*  If we can't locate the host to reset, then we failed. */
	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
		dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
			     "Can't locate host! (sc=%p)\n",
			     SCpnt ) );
		return FAILED;
	}

	printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
	       hd->ioc->name, SCpnt);

	/*  If our attempts to reset the host failed, then return a failed
	 *  status.  The host will be taken off line by the SCSI mid-layer.
	 */
	if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){
		status = FAILED;
	} else {
		/*  Make sure TM pending is cleared and TM state is set to
		 *  NONE.
		 */
		hd->tmPending = 0;
		hd->tmState = TM_STATE_NONE;
	}

	dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
		     "Status = %s\n",
		     (status == SUCCESS) ? "SUCCESS" : "FAILED" ) );

	return status;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_tm_pending_wait - wait for pending task management request to complete
 *	@hd: Pointer to MPT host structure.
 *
 *	Returns {SUCCESS,FAILED}.
 */
static int
mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
{
	unsigned long  flags;
	int            loop_count = 4 * 10;  /* Wait 10 seconds */
	int            status = FAILED;

	do {
		spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
		if (hd->tmState == TM_STATE_NONE) {
			hd->tmState = TM_STATE_IN_PROGRESS;
			hd->tmPending = 1;
			spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
			status = SUCCESS;
			break;
		}
		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
		msleep(250);
	} while (--loop_count);

	return status;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_tm_wait_for_completion - wait for completion of TM task
 *	@hd: Pointer to MPT host structure.
 *
 *	Returns {SUCCESS,FAILED}.
 */
static int
mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
{
	unsigned long  flags;
	int            loop_count = 4 * timeout;
	int            status = FAILED;

	do {
		spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
		if(hd->tmPending == 0) {
			status = SUCCESS;
 			spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
			break;
		}
		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
		msleep(250);
	} while (--loop_count);

	return status;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
{
	char *desc;

	switch (response_code) {
	case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
		desc = "The task completed.";
		break;
	case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
		desc = "The IOC received an invalid frame status.";
		break;
	case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
		desc = "The task type is not supported.";
		break;
	case MPI_SCSITASKMGMT_RSP_TM_FAILED:
		desc = "The requested task failed.";
		break;
	case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
		desc = "The task completed successfully.";
		break;
	case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
		desc = "The LUN request is invalid.";
		break;
	case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
		desc = "The task is in the IOC queue and has not been sent to target.";
		break;
	default:
		desc = "unknown";
		break;
	}
	printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
		ioc->name, response_code, desc);
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@mf: Pointer to SCSI task mgmt request frame
 *	@mr: Pointer to SCSI task mgmt reply frame
 *
 *	This routine is called from mptbase.c::mpt_interrupt() at the completion
 *	of any SCSI task management request.
 *	This routine is registered with the MPT (base) driver at driver
 *	load/init time via the mpt_register() API call.
 *
 *	Returns 1 indicating alloc'd request frame ptr should be freed.
 **/
int
mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
{
	SCSITaskMgmtReply_t	*pScsiTmReply;
	SCSITaskMgmt_t		*pScsiTmReq;
	MPT_SCSI_HOST		*hd;
	unsigned long		 flags;
	u16			 iocstatus;
	u8			 tmType;
	u32			 termination_count;

	dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
	    ioc->name, mf, mr));
	if (!ioc->sh) {
		dtmprintk((MYIOC_s_WARN_FMT
		    "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
		return 1;
	}

	if (mr == NULL) {
		dtmprintk((MYIOC_s_WARN_FMT
		    "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
		return 1;
	}

	hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
	pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
	pScsiTmReq = (SCSITaskMgmt_t*)mf;
	tmType = pScsiTmReq->TaskType;
	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);

	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
	    pScsiTmReply->ResponseCode)
		mptscsih_taskmgmt_response_code(ioc,
		    pScsiTmReply->ResponseCode);
	DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);

#if defined(MPT_DEBUG_REPLY) || defined(MPT_DEBUG_TM)
	printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
	    "iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
	    "term_cmnds=%d\n", __FUNCTION__, ioc->id, pScsiTmReply->Bus,
	    pScsiTmReply->TargetID, pScsiTmReq->TaskType,
	    le16_to_cpu(pScsiTmReply->IOCStatus),
	    le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
	    le32_to_cpu(pScsiTmReply->TerminationCount));
#endif
	if (!iocstatus) {
		dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
			hd->abortSCpnt = NULL;
		goto out;
	}

	/* Error?  (anything non-zero?) */

	/* clear flags and continue.
	 */
	switch (tmType) {

	case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
		if (termination_count == 1)
			iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
		hd->abortSCpnt = NULL;
		break;

	case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:

		/* If an internal command is present
		 * or the TM failed - reload the FW.
		 * FC FW may respond FAILED to an ABORT
		 */
		if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
		    hd->cmdPtr)
			if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
				printk((KERN_WARNING " Firmware Reload FAILED!!\n"));
		break;

	case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
	default:
		break;
	}

 out:
	spin_lock_irqsave(&ioc->FreeQlock, flags);
	hd->tmPending = 0;
	hd->tmState = TM_STATE_NONE;
	hd->tm_iocstatus = iocstatus;
	spin_unlock_irqrestore(&ioc->FreeQlock, flags);

	return 1;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	This is anyones guess quite frankly.
 */
int
mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
		sector_t capacity, int geom[])
{
	int		heads;
	int		sectors;
	sector_t	cylinders;
	ulong 		dummy;

	heads = 64;
	sectors = 32;

	dummy = heads * sectors;
	cylinders = capacity;
	sector_div(cylinders,dummy);

	/*
	 * Handle extended translation size for logical drives
	 * > 1Gb
	 */
	if ((ulong)capacity >= 0x200000) {
		heads = 255;
		sectors = 63;
		dummy = heads * sectors;
		cylinders = capacity;
		sector_div(cylinders,dummy);
	}

	/* return result */
	geom[0] = heads;
	geom[1] = sectors;
	geom[2] = cylinders;

	dprintk((KERN_NOTICE
		": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n",
		sdev->id, sdev->lun, sdev->channel, (int)cylinders, heads, sectors));

	return 0;
}

/* Search IOC page 3 to determine if this is hidden physical disk
 *
 */
int
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
	struct inactive_raid_component_info *component_info;
	int i;
	int rc = 0;

	if (!ioc->raid_data.pIocPg3)
		goto out;
	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
		if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
		    (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
			rc = 1;
			goto out;
		}
	}

	/*
	 * Check inactive list for matching phys disks
	 */
	if (list_empty(&ioc->raid_data.inactive_list))
		goto out;

	down(&ioc->raid_data.inactive_list_mutex);
	list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
	    list) {
		if ((component_info->d.PhysDiskID == id) &&
		    (component_info->d.PhysDiskBus == channel))
			rc = 1;
	}
	up(&ioc->raid_data.inactive_list_mutex);

 out:
	return rc;
}
EXPORT_SYMBOL(mptscsih_is_phys_disk);

u8
mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
	struct inactive_raid_component_info *component_info;
	int i;
	int rc = -ENXIO;

	if (!ioc->raid_data.pIocPg3)
		goto out;
	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
		if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
		    (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
			rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
			goto out;
		}
	}

	/*
	 * Check inactive list for matching phys disks
	 */
	if (list_empty(&ioc->raid_data.inactive_list))
		goto out;

	down(&ioc->raid_data.inactive_list_mutex);
	list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
	    list) {
		if ((component_info->d.PhysDiskID == id) &&
		    (component_info->d.PhysDiskBus == channel))
			rc = component_info->d.PhysDiskNum;
	}
	up(&ioc->raid_data.inactive_list_mutex);

 out:
	return rc;
}
EXPORT_SYMBOL(mptscsih_raid_id_to_num);

/*
 *	OS entry point to allow for host driver to free allocated memory
 *	Called if no device present or device being unloaded
 */
void
mptscsih_slave_destroy(struct scsi_device *sdev)
{
	struct Scsi_Host	*host = sdev->host;
	MPT_SCSI_HOST		*hd = (MPT_SCSI_HOST *)host->hostdata;
	VirtTarget		*vtarget;
	VirtDevice		*vdevice;
	struct scsi_target 	*starget;

	starget = scsi_target(sdev);
	vtarget = starget->hostdata;
	vdevice = sdev->hostdata;

	mptscsih_search_running_cmds(hd, vdevice);
	vtarget->num_luns--;
	mptscsih_synchronize_cache(hd, vdevice);
	kfree(vdevice);
	sdev->hostdata = NULL;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_change_queue_depth - This function will set a devices queue depth
 *	@sdev: per scsi_device pointer
 *	@qdepth: requested queue depth
 *
 *	Adding support for new 'change_queue_depth' api.
*/
int
mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
	MPT_SCSI_HOST		*hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
	VirtTarget 		*vtarget;
	struct scsi_target 	*starget;
	int			max_depth;
	int			tagged;

	starget = scsi_target(sdev);
	vtarget = starget->hostdata;

	if (hd->ioc->bus_type == SPI) {
		if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
			max_depth = 1;
		else if (sdev->type == TYPE_DISK &&
			 vtarget->minSyncFactor <= MPT_ULTRA160)
			max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
		else
			max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
	} else
		max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;

	if (qdepth > max_depth)
		qdepth = max_depth;
	if (qdepth == 1)
		tagged = 0;
	else
		tagged = MSG_SIMPLE_TAG;

	scsi_adjust_queue_depth(sdev, tagged, qdepth);
	return sdev->queue_depth;
}

/*
 *	OS entry point to adjust the queue_depths on a per-device basis.
 *	Called once per device the bus scan. Use it to force the queue_depth
 *	member to 1 if a device does not support Q tags.
 *	Return non-zero if fails.
 */
int
mptscsih_slave_configure(struct scsi_device *sdev)
{
	struct Scsi_Host	*sh = sdev->host;
	VirtTarget		*vtarget;
	VirtDevice		*vdevice;
	struct scsi_target 	*starget;
	MPT_SCSI_HOST		*hd = (MPT_SCSI_HOST *)sh->hostdata;

	starget = scsi_target(sdev);
	vtarget = starget->hostdata;
	vdevice = sdev->hostdata;

	dsprintk((MYIOC_s_INFO_FMT
		"device @ %p, channel=%d, id=%d, lun=%d\n",
		hd->ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
	if (hd->ioc->bus_type == SPI)
		dsprintk((MYIOC_s_INFO_FMT
		    "sdtr %d wdtr %d ppr %d inq length=%d\n",
		    hd->ioc->name, sdev->sdtr, sdev->wdtr,
		    sdev->ppr, sdev->inquiry_len));

	if (sdev->id > sh->max_id) {
		/* error case, should never happen */
		scsi_adjust_queue_depth(sdev, 0, 1);
		goto slave_configure_exit;
	}

	vdevice->configured_lun = 1;
	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);

	dsprintk((MYIOC_s_INFO_FMT
		"Queue depth=%d, tflags=%x\n",
		hd->ioc->name, sdev->queue_depth, vtarget->tflags));

	if (hd->ioc->bus_type == SPI)
		dsprintk((MYIOC_s_INFO_FMT
		    "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
		    hd->ioc->name, vtarget->negoFlags, vtarget->maxOffset,
		    vtarget->minSyncFactor));

slave_configure_exit:

	dsprintk((MYIOC_s_INFO_FMT
		"tagged %d, simple %d, ordered %d\n",
		hd->ioc->name,sdev->tagged_supported, sdev->simple_tags,
		sdev->ordered_tags));

	return 0;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *  Private routines...
 */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Utility function to copy sense data from the scsi_cmnd buffer
 * to the FC and SCSI target structures.
 *
 */
static void
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
{
	VirtDevice	*vdev;
	SCSIIORequest_t	*pReq;
	u32		 sense_count = le32_to_cpu(pScsiReply->SenseCount);

	/* Get target structure
	 */
	pReq = (SCSIIORequest_t *) mf;
	vdev = sc->device->hostdata;

	if (sense_count) {
		u8 *sense_data;
		int req_index;

		/* Copy the sense received into the scsi command block. */
		req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
		sense_data = ((u8 *)hd->ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
		memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));

		/* Log SMART data (asc = 0x5D, non-IM case only) if required.
		 */
		if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
			if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) {
				int idx;
				MPT_ADAPTER *ioc = hd->ioc;

				idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
				ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
				ioc->events[idx].eventContext = ioc->eventContext;

				ioc->events[idx].data[0] = (pReq->LUN[1] << 24) ||
					(MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) ||
					(sc->device->channel << 8) || sc->device->id;

				ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12];

				ioc->eventContext++;
				if (hd->ioc->pcidev->vendor ==
				    PCI_VENDOR_ID_IBM) {
					mptscsih_issue_sep_command(hd->ioc,
					    vdev->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
					vdev->vtarget->tflags |=
					    MPT_TARGET_FLAGS_LED_ON;
				}
			}
		}
	} else {
		dprintk((MYIOC_s_INFO_FMT "Hmmm... SenseData len=0! (?)\n",
				hd->ioc->name));
	}
}

static int
SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc)
{
	MPT_SCSI_HOST *hd;
	int i;

	hd = (MPT_SCSI_HOST *) sc->device->host->hostdata;

	for (i = 0; i < hd->ioc->req_depth; i++) {
		if (hd->ScsiLookup[i] == sc) {
			return i;
		}
	}

	return -1;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int
mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
	MPT_SCSI_HOST	*hd;
	unsigned long	 flags;
	int 		ii;

	dtmprintk((KERN_WARNING MYNAM
			": IOC %s_reset routed to SCSI host driver!\n",
			reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
			reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));

	/* If a FW reload request arrives after base installed but
	 * before all scsi hosts have been attached, then an alt_ioc
	 * may have a NULL sh pointer.
	 */
	if ((ioc->sh == NULL) || (ioc->sh->hostdata == NULL))
		return 0;
	else
		hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;

	if (reset_phase == MPT_IOC_SETUP_RESET) {
		dtmprintk((MYIOC_s_WARN_FMT "Setup-Diag Reset\n", ioc->name));

		/* Clean Up:
		 * 1. Set Hard Reset Pending Flag
		 * All new commands go to doneQ
		 */
		hd->resetPending = 1;

	} else if (reset_phase == MPT_IOC_PRE_RESET) {
		dtmprintk((MYIOC_s_WARN_FMT "Pre-Diag Reset\n", ioc->name));

		/* 2. Flush running commands
		 *	Clean ScsiLookup (and associated memory)
		 *	AND clean mytaskQ
		 */

		/* 2b. Reply to OS all known outstanding I/O commands.
		 */
		mptscsih_flush_running_cmds(hd);

		/* 2c. If there was an internal command that
		 * has not completed, configuration or io request,
		 * free these resources.
		 */
		if (hd->cmdPtr) {
			del_timer(&hd->timer);
			mpt_free_msg_frame(ioc, hd->cmdPtr);
		}

		dtmprintk((MYIOC_s_WARN_FMT "Pre-Reset complete.\n", ioc->name));

	} else {
		dtmprintk((MYIOC_s_WARN_FMT "Post-Diag Reset\n", ioc->name));

		/* Once a FW reload begins, all new OS commands are
		 * redirected to the doneQ w/ a reset status.
		 * Init all control structures.
		 */

		/* ScsiLookup initialization
		 */
		for (ii=0; ii < hd->ioc->req_depth; ii++)
			hd->ScsiLookup[ii] = NULL;

		/* 2. Chain Buffer initialization
		 */

		/* 4. Renegotiate to all devices, if SPI
		 */

		/* 5. Enable new commands to be posted
		 */
		spin_lock_irqsave(&ioc->FreeQlock, flags);
		hd->tmPending = 0;
		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
		hd->resetPending = 0;
		hd->tmState = TM_STATE_NONE;

		/* 6. If there was an internal command,
		 * wake this process up.
		 */
		if (hd->cmdPtr) {
			/*
			 * Wake up the original calling thread
			 */
			hd->pLocal = &hd->localReply;
			hd->pLocal->completion = MPT_SCANDV_DID_RESET;
			hd->scandv_wait_done = 1;
			wake_up(&hd->scandv_waitq);
			hd->cmdPtr = NULL;
		}

		dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));

	}

	return 1;		/* currently means nothing really */
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
	MPT_SCSI_HOST *hd;
	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;

	devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
			ioc->name, event));

	if (ioc->sh == NULL ||
		((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
		return 1;

	switch (event) {
	case MPI_EVENT_UNIT_ATTENTION:			/* 03 */
		/* FIXME! */
		break;
	case MPI_EVENT_IOC_BUS_RESET:			/* 04 */
	case MPI_EVENT_EXT_BUS_RESET:			/* 05 */
		if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
			hd->soft_resets++;
		break;
	case MPI_EVENT_LOGOUT:				/* 09 */
		/* FIXME! */
		break;

	case MPI_EVENT_RESCAN:				/* 06 */
		break;

		/*
		 *  CHECKME! Don't think we need to do
		 *  anything for these, but...
		 */
	case MPI_EVENT_LINK_STATUS_CHANGE:		/* 07 */
	case MPI_EVENT_LOOP_STATE_CHANGE:		/* 08 */
		/*
		 *  CHECKME!  Falling thru...
		 */
		break;

	case MPI_EVENT_INTEGRATED_RAID:			/* 0B */
		break;

	case MPI_EVENT_NONE:				/* 00 */
	case MPI_EVENT_LOG_DATA:			/* 01 */
	case MPI_EVENT_STATE_CHANGE:			/* 02 */
	case MPI_EVENT_EVENT_CHANGE:			/* 0A */
	default:
		dprintk((KERN_INFO "  Ignoring event (=%02Xh)\n", event));
		break;
	}

	return 1;		/* currently means nothing really */
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *  Bus Scan and Domain Validation functionality ...
 */

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
 *	mptscsih_scandv_complete - Scan and DV callback routine registered
 *	to Fustion MPT (base) driver.
 *
 *	@ioc: Pointer to MPT_ADAPTER structure
 *	@mf: Pointer to original MPT request frame
 *	@mr: Pointer to MPT reply frame (NULL if TurboReply)
 *
 *	This routine is called from mpt.c::mpt_interrupt() at the completion
 *	of any SCSI IO request.
 *	This routine is registered with the Fusion MPT (base) driver at driver
 *	load/init time via the mpt_register() API call.
 *
 *	Returns 1 indicating alloc'd request frame ptr should be freed.
 *
 *	Remark: Sets a completion code and (possibly) saves sense data
 *	in the IOC member localReply structure.
 *	Used ONLY for DV and other internal commands.
 */
int
mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
{
	MPT_SCSI_HOST	*hd;
	SCSIIORequest_t *pReq;
	int		 completionCode;
	u16		 req_idx;

	hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;

	if ((mf == NULL) ||
	    (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
		printk(MYIOC_s_ERR_FMT
			"ScanDvComplete, %s req frame ptr! (=%p)\n",
				ioc->name, mf?"BAD":"NULL", (void *) mf);
		goto wakeup;
	}

	del_timer(&hd->timer);
	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
	hd->ScsiLookup[req_idx] = NULL;
	pReq = (SCSIIORequest_t *) mf;

	if (mf != hd->cmdPtr) {
		printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
				hd->ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
	}
	hd->cmdPtr = NULL;

	ddvprintk((MYIOC_s_INFO_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
			hd->ioc->name, mf, mr, req_idx));

	hd->pLocal = &hd->localReply;
	hd->pLocal->scsiStatus = 0;

	/* If target struct exists, clear sense valid flag.
	 */
	if (mr == NULL) {
		completionCode = MPT_SCANDV_GOOD;
	} else {
		SCSIIOReply_t	*pReply;
		u16		 status;
		u8		 scsi_status;

		pReply = (SCSIIOReply_t *) mr;

		status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
		scsi_status = pReply->SCSIStatus;

		ddvtprintk((KERN_NOTICE "  IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh, IOCLogInfo=%08xh\n",
			     status, pReply->SCSIState, scsi_status,
			     le32_to_cpu(pReply->IOCLogInfo)));

		switch(status) {

		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
			completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
			break;

		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
			completionCode = MPT_SCANDV_DID_RESET;
			break;

		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
			if (pReply->Function == MPI_FUNCTION_CONFIG) {
				ConfigReply_t *pr = (ConfigReply_t *)mr;
				completionCode = MPT_SCANDV_GOOD;
				hd->pLocal->header.PageVersion = pr->Header.PageVersion;
				hd->pLocal->header.PageLength = pr->Header.PageLength;
				hd->pLocal->header.PageNumber = pr->Header.PageNumber;
				hd->pLocal->header.PageType = pr->Header.PageType;

			} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
				/* If the RAID Volume request is successful,
				 * return GOOD, else indicate that
				 * some type of error occurred.
				 */
				MpiRaidActionReply_t	*pr = (MpiRaidActionReply_t *)mr;
				if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
					completionCode = MPT_SCANDV_GOOD;
				else
					completionCode = MPT_SCANDV_SOME_ERROR;
				memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));

			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
				u8		*sense_data;
				int		 sz;

				/* save sense data in global structure
				 */
				completionCode = MPT_SCANDV_SENSE;
				hd->pLocal->scsiStatus = scsi_status;
				sense_data = ((u8 *)hd->ioc->sense_buf_pool +
					(req_idx * MPT_SENSE_BUFFER_ALLOC));

				sz = min_t(int, pReq->SenseBufferLength,
							SCSI_STD_SENSE_BYTES);
				memcpy(hd->pLocal->sense, sense_data, sz);

				ddvprintk((KERN_NOTICE "  Check Condition, sense ptr %p\n",
						sense_data));
			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
				if (pReq->CDB[0] == INQUIRY)
					completionCode = MPT_SCANDV_ISSUE_SENSE;
				else
					completionCode = MPT_SCANDV_DID_RESET;
			}
			else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
				completionCode = MPT_SCANDV_DID_RESET;
			else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
				completionCode = MPT_SCANDV_DID_RESET;
			else {
				completionCode = MPT_SCANDV_GOOD;
				hd->pLocal->scsiStatus = scsi_status;
			}
			break;

		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
			if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
				completionCode = MPT_SCANDV_DID_RESET;
			else
				completionCode = MPT_SCANDV_SOME_ERROR;
			break;

		default:
			completionCode = MPT_SCANDV_SOME_ERROR;
			break;

		}	/* switch(status) */

		ddvtprintk((KERN_NOTICE "  completionCode set to %08xh\n",
				completionCode));
	} /* end of address reply case */

	hd->pLocal->completion = completionCode;

	/* MF and RF are freed in mpt_interrupt
	 */
wakeup:
	/* Free Chain buffers (will never chain) in scan or dv */
	//mptscsih_freeChainBuffers(ioc, req_idx);

	/*
	 * Wake up the original calling thread
	 */
	hd->scandv_wait_done = 1;
	wake_up(&hd->scandv_waitq);

	return 1;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*	mptscsih_timer_expired - Call back for timer process.
 *	Used only for dv functionality.
 *	@data: Pointer to MPT_SCSI_HOST recast as an unsigned long
 *
 */
void
mptscsih_timer_expired(unsigned long data)
{
	MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data;

	ddvprintk((MYIOC_s_WARN_FMT "Timer Expired! Cmd %p\n", hd->ioc->name, hd->cmdPtr));

	if (hd->cmdPtr) {
		MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr;

		if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
			/* Desire to issue a task management request here.
			 * TM requests MUST be single threaded.
			 * If old eh code and no TM current, issue request.
			 * If new eh code, do nothing. Wait for OS cmd timeout
			 *	for bus reset.
			 */
			ddvtprintk((MYIOC_s_NOTE_FMT "DV Cmd Timeout: NoOp\n", hd->ioc->name));
		} else {
			/* Perform a FW reload */
			if (mpt_HardResetHandler(hd->ioc, NO_SLEEP) < 0) {
				printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", hd->ioc->name);
			}
		}
	} else {
		/* This should NEVER happen */
		printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", hd->ioc->name);
	}

	/* No more processing.
	 * TM call will generate an interrupt for SCSI TM Management.
	 * The FW will reply to all outstanding commands, callback will finish cleanup.
	 * Hard reset clean-up will free all resources.
	 */
	ddvprintk((MYIOC_s_WARN_FMT "Timer Expired Complete!\n", hd->ioc->name));

	return;
}


/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_do_cmd - Do internal command.
 *	@hd: MPT_SCSI_HOST pointer
 *	@io: INTERNAL_CMD pointer.
 *
 *	Issue the specified internally generated command and do command
 *	specific cleanup. For bus scan / DV only.
 *	NOTES: If command is Inquiry and status is good,
 *	initialize a target structure, save the data
 *
 *	Remark: Single threaded access only.
 *
 *	Return:
 *		< 0 if an illegal command or no resources
 *
 *		   0 if good
 *
 *		 > 0 if command complete but some type of completion error.
 */
static int
mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
{
	MPT_FRAME_HDR	*mf;
	SCSIIORequest_t	*pScsiReq;
	SCSIIORequest_t	 ReqCopy;
	int		 my_idx, ii, dir;
	int		 rc, cmdTimeout;
	int		in_isr;
	char		 cmdLen;
	char		 CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
	char		 cmd = io->cmd;

	in_isr = in_interrupt();
	if (in_isr) {
		dprintk((MYIOC_s_WARN_FMT "Internal SCSI IO request not allowed in ISR context!\n",
       				hd->ioc->name));
		return -EPERM;
	}


	/* Set command specific information
	 */
	switch (cmd) {
	case INQUIRY:
		cmdLen = 6;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
		CDB[4] = io->size;
		cmdTimeout = 10;
		break;

	case TEST_UNIT_READY:
		cmdLen = 6;
		dir = MPI_SCSIIO_CONTROL_READ;
		cmdTimeout = 10;
		break;

	case START_STOP:
		cmdLen = 6;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
		CDB[4] = 1;	/*Spin up the disk */
		cmdTimeout = 15;
		break;

	case REQUEST_SENSE:
		cmdLen = 6;
		CDB[0] = cmd;
		CDB[4] = io->size;
		dir = MPI_SCSIIO_CONTROL_READ;
		cmdTimeout = 10;
		break;

	case READ_BUFFER:
		cmdLen = 10;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
		if (io->flags & MPT_ICFLAG_ECHO) {
			CDB[1] = 0x0A;
		} else {
			CDB[1] = 0x02;
		}

		if (io->flags & MPT_ICFLAG_BUF_CAP) {
			CDB[1] |= 0x01;
		}
		CDB[6] = (io->size >> 16) & 0xFF;
		CDB[7] = (io->size >>  8) & 0xFF;
		CDB[8] = io->size & 0xFF;
		cmdTimeout = 10;
		break;

	case WRITE_BUFFER:
		cmdLen = 10;
		dir = MPI_SCSIIO_CONTROL_WRITE;
		CDB[0] = cmd;
		if (io->flags & MPT_ICFLAG_ECHO) {
			CDB[1] = 0x0A;
		} else {
			CDB[1] = 0x02;
		}
		CDB[6] = (io->size >> 16) & 0xFF;
		CDB[7] = (io->size >>  8) & 0xFF;
		CDB[8] = io->size & 0xFF;
		cmdTimeout = 10;
		break;

	case RESERVE:
		cmdLen = 6;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
		cmdTimeout = 10;
		break;

	case RELEASE:
		cmdLen = 6;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
		cmdTimeout = 10;
		break;

	case SYNCHRONIZE_CACHE:
		cmdLen = 10;
		dir = MPI_SCSIIO_CONTROL_READ;
		CDB[0] = cmd;
//		CDB[1] = 0x02;	/* set immediate bit */
		cmdTimeout = 10;
		break;

	default:
		/* Error Case */
		return -EFAULT;
	}

	/* Get and Populate a free Frame
	 */
	if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
		ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n",
					hd->ioc->name));
		return -EBUSY;
	}

	pScsiReq = (SCSIIORequest_t *) mf;

	/* Get the request index */
	my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
	ADD_INDEX_LOG(my_idx); /* for debug */

	if (io->flags & MPT_ICFLAG_PHYS_DISK) {
		pScsiReq->TargetID = io->physDiskNum;
		pScsiReq->Bus = 0;
		pScsiReq->ChainOffset = 0;
		pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
	} else {
		pScsiReq->TargetID = io->id;
		pScsiReq->Bus = io->channel;
		pScsiReq->ChainOffset = 0;
		pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
	}

	pScsiReq->CDBLength = cmdLen;
	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;

	pScsiReq->Reserved = 0;

	pScsiReq->MsgFlags = mpt_msg_flags();
	/* MsgContext set in mpt_get_msg_fram call  */

	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);

	if (io->flags & MPT_ICFLAG_TAGGED_CMD)
		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
	else
		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);

	if (cmd == REQUEST_SENSE) {
		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
		ddvprintk((MYIOC_s_INFO_FMT "Untagged! 0x%2x\n",
			hd->ioc->name, cmd));
	}

	for (ii=0; ii < 16; ii++)
		pScsiReq->CDB[ii] = CDB[ii];

	pScsiReq->DataLength = cpu_to_le32(io->size);
	pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));

	ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
			hd->ioc->name, cmd, io->channel, io->id, io->lun));

	if (dir == MPI_SCSIIO_CONTROL_READ) {
		mpt_add_sge((char *) &pScsiReq->SGL,
			MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
			io->data_dma);
	} else {
		mpt_add_sge((char *) &pScsiReq->SGL,
			MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
			io->data_dma);
	}

	/* The ISR will free the request frame, but we need
	 * the information to initialize the target. Duplicate.
	 */
	memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));

	/* Issue this command after:
	 *	finish init
	 *	add timer
	 * Wait until the reply has been received
	 *  ScsiScanDvCtx callback function will
	 *	set hd->pLocal;
	 *	set scandv_wait_done and call wake_up
	 */
	hd->pLocal = NULL;
	hd->timer.expires = jiffies + HZ*cmdTimeout;
	hd->scandv_wait_done = 0;

	/* Save cmd pointer, for resource free if timeout or
	 * FW reload occurs
	 */
	hd->cmdPtr = mf;

	add_timer(&hd->timer);
	mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
	wait_event(hd->scandv_waitq, hd->scandv_wait_done);

	if (hd->pLocal) {
		rc = hd->pLocal->completion;
		hd->pLocal->skip = 0;

		/* Always set fatal error codes in some cases.
		 */
		if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
			rc = -ENXIO;
		else if (rc == MPT_SCANDV_SOME_ERROR)
			rc =  -rc;
	} else {
		rc = -EFAULT;
		/* This should never happen. */
		ddvprintk((MYIOC_s_INFO_FMT "_do_cmd: Null pLocal!!!\n",
				hd->ioc->name));
	}

	return rc;
}

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
 *	mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
 *	@hd: Pointer to a SCSI HOST structure
 *	@vdevice: virtual target device
 *
 *	Uses the ISR, but with special processing.
 *	MUST be single-threaded.
 *
 */
static void
mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
{
	INTERNAL_CMD		 iocmd;

	/* Following parameters will not change
	 * in this routine.
	 */
	iocmd.cmd = SYNCHRONIZE_CACHE;
	iocmd.flags = 0;
	iocmd.physDiskNum = -1;
	iocmd.data = NULL;
	iocmd.data_dma = -1;
	iocmd.size = 0;
	iocmd.rsvd = iocmd.rsvd2 = 0;
	iocmd.channel = vdevice->vtarget->channel;
	iocmd.id = vdevice->vtarget->id;
	iocmd.lun = vdevice->lun;

	if ((vdevice->vtarget->type == TYPE_DISK) &&
	    (vdevice->configured_lun))
		mptscsih_do_cmd(hd, &iocmd);
}

EXPORT_SYMBOL(mptscsih_remove);
EXPORT_SYMBOL(mptscsih_shutdown);
#ifdef CONFIG_PM
EXPORT_SYMBOL(mptscsih_suspend);
EXPORT_SYMBOL(mptscsih_resume);
#endif
EXPORT_SYMBOL(mptscsih_proc_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
EXPORT_SYMBOL(mptscsih_slave_destroy);
EXPORT_SYMBOL(mptscsih_slave_configure);
EXPORT_SYMBOL(mptscsih_abort);
EXPORT_SYMBOL(mptscsih_dev_reset);
EXPORT_SYMBOL(mptscsih_bus_reset);
EXPORT_SYMBOL(mptscsih_host_reset);
EXPORT_SYMBOL(mptscsih_bios_param);
EXPORT_SYMBOL(mptscsih_io_done);
EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
EXPORT_SYMBOL(mptscsih_scandv_complete);
EXPORT_SYMBOL(mptscsih_event_process);
EXPORT_SYMBOL(mptscsih_ioc_reset);
EXPORT_SYMBOL(mptscsih_change_queue_depth);
EXPORT_SYMBOL(mptscsih_timer_expired);
EXPORT_SYMBOL(mptscsih_TMHandler);

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/