Alessandro Rubini | 28ad94e | 2009-07-02 19:06:47 +0100 | [diff] [blame] | 1 | /* |
| 2 | * This file contains the hardware definitions of the Nomadik. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License as published by |
| 6 | * the Free Software Foundation; either version 2 of the License, or |
| 7 | * (at your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | * |
| 14 | * YOU should have received a copy of the GNU General Public License |
| 15 | * along with this program; if not, write to the Free Software |
| 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 17 | */ |
| 18 | #ifndef __ASM_ARCH_HARDWARE_H |
| 19 | #define __ASM_ARCH_HARDWARE_H |
| 20 | |
| 21 | /* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */ |
| 22 | #define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */ |
| 23 | #define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */ |
| 24 | #define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */ |
| 25 | |
| 26 | /* used in C code, so cast to proper type */ |
| 27 | #define io_p2v(x) ((void __iomem *)(x) \ |
| 28 | - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) |
| 29 | #define io_v2p(x) ((unsigned long)(x) \ |
| 30 | - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL) |
| 31 | |
| 32 | /* used in asm code, so no casts */ |
| 33 | #define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) |
| 34 | |
| 35 | /* |
| 36 | * Base address defination for Nomadik Onchip Logic Block |
| 37 | */ |
| 38 | #define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ |
| 39 | #define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ |
| 40 | #define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ |
| 41 | #define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ |
| 42 | #define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ |
| 43 | #define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ |
| 44 | #define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ |
| 45 | #define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ |
| 46 | #define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ |
| 47 | #define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ |
| 48 | #define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ |
| 49 | #define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ |
| 50 | #define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ |
| 51 | #define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ |
| 52 | #define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ |
| 53 | #define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ |
| 54 | #define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ |
| 55 | #define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ |
| 56 | #define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ |
| 57 | #define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ |
| 58 | #define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ |
| 59 | #define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ |
| 60 | #define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ |
| 61 | #define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ |
| 62 | #define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ |
| 63 | #define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ |
| 64 | #define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ |
| 65 | #define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ |
| 66 | #define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ |
| 67 | #define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ |
| 68 | #define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ |
| 69 | #define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ |
| 70 | #define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ |
| 71 | #define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ |
| 72 | #define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ |
| 73 | #define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ |
| 74 | #define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ |
| 75 | #define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ |
| 76 | #define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ |
| 77 | #define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ |
| 78 | |
| 79 | /* Other ranges, not for p2v/v2p */ |
| 80 | #define NOMADIK_BACKUP_RAM 0x80010000 |
| 81 | #define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */ |
| 82 | #define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */ |
| 83 | #define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */ |
| 84 | #define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */ |
| 85 | |
| 86 | #define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE) |
| 87 | #define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE) |
| 88 | #define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE) |
| 89 | |
| 90 | #endif /* __ASM_ARCH_HARDWARE_H */ |