blob: 13e7d7bfe85f236ca82765aa47ae810525030294 [file] [log] [blame]
Linus Walleij14fa5692009-05-21 23:17:06 +02001/*
2 * Copyright (C) 2007-2009 ST-Ericsson
3 * License terms: GNU General Public License (GPL) version 2
4 * Low-level core for exclusive access to the AB3100 IC on the I2C bus
5 * and some basic chip-configuration.
6 * Author: Linus Walleij <linus.walleij@stericsson.com>
7 */
8
9#include <linux/i2c.h>
10#include <linux/mutex.h>
11#include <linux/list.h>
12#include <linux/notifier.h>
13#include <linux/err.h>
14#include <linux/platform_device.h>
15#include <linux/device.h>
16#include <linux/interrupt.h>
17#include <linux/workqueue.h>
18#include <linux/debugfs.h>
19#include <linux/seq_file.h>
20#include <linux/uaccess.h>
21#include <linux/mfd/ab3100.h>
22
23/* These are the only registers inside AB3100 used in this main file */
24
25/* Interrupt event registers */
26#define AB3100_EVENTA1 0x21
27#define AB3100_EVENTA2 0x22
28#define AB3100_EVENTA3 0x23
29
30/* AB3100 DAC converter registers */
31#define AB3100_DIS 0x00
32#define AB3100_D0C 0x01
33#define AB3100_D1C 0x02
34#define AB3100_D2C 0x03
35#define AB3100_D3C 0x04
36
37/* Chip ID register */
38#define AB3100_CID 0x20
39
40/* AB3100 interrupt registers */
41#define AB3100_IMRA1 0x24
42#define AB3100_IMRA2 0x25
43#define AB3100_IMRA3 0x26
44#define AB3100_IMRB1 0x2B
45#define AB3100_IMRB2 0x2C
46#define AB3100_IMRB3 0x2D
47
48/* System Power Monitoring and control registers */
49#define AB3100_MCA 0x2E
50#define AB3100_MCB 0x2F
51
52/* SIM power up */
53#define AB3100_SUP 0x50
54
55/*
56 * I2C communication
57 *
58 * The AB3100 is usually assigned address 0x48 (7-bit)
59 * The chip is defined in the platform i2c_board_data section.
60 */
61static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
62I2C_CLIENT_INSMOD_1(ab3100);
63
64u8 ab3100_get_chip_type(struct ab3100 *ab3100)
65{
66 u8 chip = ABUNKNOWN;
67
68 switch (ab3100->chip_id & 0xf0) {
69 case 0xa0:
70 chip = AB3000;
71 break;
72 case 0xc0:
73 chip = AB3100;
74 break;
75 }
76 return chip;
77}
78EXPORT_SYMBOL(ab3100_get_chip_type);
79
80int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
81{
82 u8 regandval[2] = {reg, regval};
83 int err;
84
85 err = mutex_lock_interruptible(&ab3100->access_mutex);
86 if (err)
87 return err;
88
89 /*
90 * A two-byte write message with the first byte containing the register
91 * number and the second byte containing the value to be written
92 * effectively sets a register in the AB3100.
93 */
94 err = i2c_master_send(ab3100->i2c_client, regandval, 2);
95 if (err < 0) {
96 dev_err(ab3100->dev,
97 "write error (write register): %d\n",
98 err);
99 } else if (err != 2) {
100 dev_err(ab3100->dev,
101 "write error (write register) "
102 "%d bytes transferred (expected 2)\n",
103 err);
104 err = -EIO;
105 } else {
106 /* All is well */
107 err = 0;
108 }
109 mutex_unlock(&ab3100->access_mutex);
110 return 0;
111}
112EXPORT_SYMBOL(ab3100_set_register);
113
114/*
115 * The test registers exist at an I2C bus address up one
116 * from the ordinary base. They are not supposed to be used
117 * in production code, but sometimes you have to do that
118 * anyway. It's currently only used from this file so declare
119 * it static and do not export.
120 */
121static int ab3100_set_test_register(struct ab3100 *ab3100,
122 u8 reg, u8 regval)
123{
124 u8 regandval[2] = {reg, regval};
125 int err;
126
127 err = mutex_lock_interruptible(&ab3100->access_mutex);
128 if (err)
129 return err;
130
131 err = i2c_master_send(ab3100->testreg_client, regandval, 2);
132 if (err < 0) {
133 dev_err(ab3100->dev,
134 "write error (write test register): %d\n",
135 err);
136 } else if (err != 2) {
137 dev_err(ab3100->dev,
138 "write error (write test register) "
139 "%d bytes transferred (expected 2)\n",
140 err);
141 err = -EIO;
142 } else {
143 /* All is well */
144 err = 0;
145 }
146 mutex_unlock(&ab3100->access_mutex);
147
148 return err;
149}
150
151int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
152{
153 int err;
154
155 err = mutex_lock_interruptible(&ab3100->access_mutex);
156 if (err)
157 return err;
158
159 /*
160 * AB3100 require an I2C "stop" command between each message, else
161 * it will not work. The only way of achieveing this with the
162 * message transport layer is to send the read and write messages
163 * separately.
164 */
165 err = i2c_master_send(ab3100->i2c_client, &reg, 1);
166 if (err < 0) {
167 dev_err(ab3100->dev,
168 "write error (send register address): %d\n",
169 err);
170 goto get_reg_out_unlock;
171 } else if (err != 1) {
172 dev_err(ab3100->dev,
173 "write error (send register address) "
174 "%d bytes transferred (expected 1)\n",
175 err);
176 err = -EIO;
177 goto get_reg_out_unlock;
178 } else {
179 /* All is well */
180 err = 0;
181 }
182
183 err = i2c_master_recv(ab3100->i2c_client, regval, 1);
184 if (err < 0) {
185 dev_err(ab3100->dev,
186 "write error (read register): %d\n",
187 err);
188 goto get_reg_out_unlock;
189 } else if (err != 1) {
190 dev_err(ab3100->dev,
191 "write error (read register) "
192 "%d bytes transferred (expected 1)\n",
193 err);
194 err = -EIO;
195 goto get_reg_out_unlock;
196 } else {
197 /* All is well */
198 err = 0;
199 }
200
201 get_reg_out_unlock:
202 mutex_unlock(&ab3100->access_mutex);
203 return err;
204}
205EXPORT_SYMBOL(ab3100_get_register);
206
207int ab3100_get_register_page(struct ab3100 *ab3100,
208 u8 first_reg, u8 *regvals, u8 numregs)
209{
210 int err;
211
212 if (ab3100->chip_id == 0xa0 ||
213 ab3100->chip_id == 0xa1)
214 /* These don't support paged reads */
215 return -EIO;
216
217 err = mutex_lock_interruptible(&ab3100->access_mutex);
218 if (err)
219 return err;
220
221 /*
222 * Paged read also require an I2C "stop" command.
223 */
224 err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
225 if (err < 0) {
226 dev_err(ab3100->dev,
227 "write error (send first register address): %d\n",
228 err);
229 goto get_reg_page_out_unlock;
230 } else if (err != 1) {
231 dev_err(ab3100->dev,
232 "write error (send first register address) "
233 "%d bytes transferred (expected 1)\n",
234 err);
235 err = -EIO;
236 goto get_reg_page_out_unlock;
237 }
238
239 err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
240 if (err < 0) {
241 dev_err(ab3100->dev,
242 "write error (read register page): %d\n",
243 err);
244 goto get_reg_page_out_unlock;
245 } else if (err != numregs) {
246 dev_err(ab3100->dev,
247 "write error (read register page) "
248 "%d bytes transferred (expected %d)\n",
249 err, numregs);
250 err = -EIO;
251 goto get_reg_page_out_unlock;
252 }
253
254 /* All is well */
255 err = 0;
256
257 get_reg_page_out_unlock:
258 mutex_unlock(&ab3100->access_mutex);
259 return err;
260}
261EXPORT_SYMBOL(ab3100_get_register_page);
262
263int ab3100_mask_and_set_register(struct ab3100 *ab3100,
264 u8 reg, u8 andmask, u8 ormask)
265{
266 u8 regandval[2] = {reg, 0};
267 int err;
268
269 err = mutex_lock_interruptible(&ab3100->access_mutex);
270 if (err)
271 return err;
272
273 /* First read out the target register */
274 err = i2c_master_send(ab3100->i2c_client, &reg, 1);
275 if (err < 0) {
276 dev_err(ab3100->dev,
277 "write error (maskset send address): %d\n",
278 err);
279 goto get_maskset_unlock;
280 } else if (err != 1) {
281 dev_err(ab3100->dev,
282 "write error (maskset send address) "
283 "%d bytes transferred (expected 1)\n",
284 err);
285 err = -EIO;
286 goto get_maskset_unlock;
287 }
288
289 err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
290 if (err < 0) {
291 dev_err(ab3100->dev,
292 "write error (maskset read register): %d\n",
293 err);
294 goto get_maskset_unlock;
295 } else if (err != 1) {
296 dev_err(ab3100->dev,
297 "write error (maskset read register) "
298 "%d bytes transferred (expected 1)\n",
299 err);
300 err = -EIO;
301 goto get_maskset_unlock;
302 }
303
304 /* Modify the register */
305 regandval[1] &= andmask;
306 regandval[1] |= ormask;
307
308 /* Write the register */
309 err = i2c_master_send(ab3100->i2c_client, regandval, 2);
310 if (err < 0) {
311 dev_err(ab3100->dev,
312 "write error (write register): %d\n",
313 err);
314 goto get_maskset_unlock;
315 } else if (err != 2) {
316 dev_err(ab3100->dev,
317 "write error (write register) "
318 "%d bytes transferred (expected 2)\n",
319 err);
320 err = -EIO;
321 goto get_maskset_unlock;
322 }
323
324 /* All is well */
325 err = 0;
326
327 get_maskset_unlock:
328 mutex_unlock(&ab3100->access_mutex);
329 return err;
330}
331EXPORT_SYMBOL(ab3100_mask_and_set_register);
332
333/*
334 * Register a simple callback for handling any AB3100 events.
335 */
336int ab3100_event_register(struct ab3100 *ab3100,
337 struct notifier_block *nb)
338{
339 return blocking_notifier_chain_register(&ab3100->event_subscribers,
340 nb);
341}
342EXPORT_SYMBOL(ab3100_event_register);
343
344/*
345 * Remove a previously registered callback.
346 */
347int ab3100_event_unregister(struct ab3100 *ab3100,
348 struct notifier_block *nb)
349{
350 return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
351 nb);
352}
353EXPORT_SYMBOL(ab3100_event_unregister);
354
355
356int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
357 u32 *fatevent)
358{
359 if (!ab3100->startup_events_read)
360 return -EAGAIN; /* Try again later */
361 *fatevent = ab3100->startup_events;
362 return 0;
363}
364EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
365
366/* Interrupt handling worker */
367static void ab3100_work(struct work_struct *work)
368{
369 struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
370 u8 event_regs[3];
371 u32 fatevent;
372 int err;
373
374 err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
375 event_regs, 3);
376 if (err)
377 goto err_event_wq;
378
379 fatevent = (event_regs[0] << 16) |
380 (event_regs[1] << 8) |
381 event_regs[2];
382
383 if (!ab3100->startup_events_read) {
384 ab3100->startup_events = fatevent;
385 ab3100->startup_events_read = true;
386 }
387 /*
388 * The notified parties will have to mask out the events
389 * they're interested in and react to them. They will be
390 * notified on all events, then they use the fatevent value
391 * to determine if they're interested.
392 */
393 blocking_notifier_call_chain(&ab3100->event_subscribers,
394 fatevent, NULL);
395
396 dev_dbg(ab3100->dev,
397 "IRQ Event: 0x%08x\n", fatevent);
398
399 /* By now the IRQ should be acked and deasserted so enable it again */
400 enable_irq(ab3100->i2c_client->irq);
401 return;
402
403 err_event_wq:
404 dev_dbg(ab3100->dev,
405 "error in event workqueue\n");
406 /* Enable the IRQ anyway, what choice do we have? */
407 enable_irq(ab3100->i2c_client->irq);
408 return;
409}
410
411static irqreturn_t ab3100_irq_handler(int irq, void *data)
412{
413 struct ab3100 *ab3100 = data;
414 /*
415 * Disable the IRQ and dispatch a worker to handle the
416 * event. Since the chip resides on I2C this is slow
417 * stuff and we will re-enable the interrupts once th
418 * worker has finished.
419 */
420 disable_irq(ab3100->i2c_client->irq);
421 schedule_work(&ab3100->work);
422 return IRQ_HANDLED;
423}
424
425#ifdef CONFIG_DEBUG_FS
426/*
427 * Some debugfs entries only exposed if we're using debug
428 */
429static int ab3100_registers_print(struct seq_file *s, void *p)
430{
431 struct ab3100 *ab3100 = s->private;
432 u8 value;
433 u8 reg;
434
435 seq_printf(s, "AB3100 registers:\n");
436
437 for (reg = 0; reg < 0xff; reg++) {
438 ab3100_get_register(ab3100, reg, &value);
439 seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
440 }
441 return 0;
442}
443
444static int ab3100_registers_open(struct inode *inode, struct file *file)
445{
446 return single_open(file, ab3100_registers_print, inode->i_private);
447}
448
449static const struct file_operations ab3100_registers_fops = {
450 .open = ab3100_registers_open,
451 .read = seq_read,
452 .llseek = seq_lseek,
453 .release = single_release,
454 .owner = THIS_MODULE,
455};
456
457struct ab3100_get_set_reg_priv {
458 struct ab3100 *ab3100;
459 bool mode;
460};
461
462static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
463{
464 file->private_data = inode->i_private;
465 return 0;
466}
467
468static int ab3100_get_set_reg(struct file *file,
469 const char __user *user_buf,
470 size_t count, loff_t *ppos)
471{
472 struct ab3100_get_set_reg_priv *priv = file->private_data;
473 struct ab3100 *ab3100 = priv->ab3100;
474 char buf[32];
475 int buf_size;
476 int regp;
477 unsigned long user_reg;
478 int err;
479 int i = 0;
480
481 /* Get userspace string and assure termination */
482 buf_size = min(count, (sizeof(buf)-1));
483 if (copy_from_user(buf, user_buf, buf_size))
484 return -EFAULT;
485 buf[buf_size] = 0;
486
487 /*
488 * The idea is here to parse a string which is either
489 * "0xnn" for reading a register, or "0xaa 0xbb" for
490 * writing 0xbb to the register 0xaa. First move past
491 * whitespace and then begin to parse the register.
492 */
493 while ((i < buf_size) && (buf[i] == ' '))
494 i++;
495 regp = i;
496
497 /*
498 * Advance pointer to end of string then terminate
499 * the register string. This is needed to satisfy
500 * the strict_strtoul() function.
501 */
502 while ((i < buf_size) && (buf[i] != ' '))
503 i++;
504 buf[i] = '\0';
505
506 err = strict_strtoul(&buf[regp], 16, &user_reg);
507 if (err)
508 return err;
509 if (user_reg > 0xff)
510 return -EINVAL;
511
512 /* Either we read or we write a register here */
513 if (!priv->mode) {
514 /* Reading */
515 u8 reg = (u8) user_reg;
516 u8 regvalue;
517
518 ab3100_get_register(ab3100, reg, &regvalue);
519
520 dev_info(ab3100->dev,
521 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
522 reg, regvalue);
523 } else {
524 int valp;
525 unsigned long user_value;
526 u8 reg = (u8) user_reg;
527 u8 value;
528 u8 regvalue;
529
530 /*
531 * Writing, we need some value to write to
532 * the register so keep parsing the string
533 * from userspace.
534 */
535 i++;
536 while ((i < buf_size) && (buf[i] == ' '))
537 i++;
538 valp = i;
539 while ((i < buf_size) && (buf[i] != ' '))
540 i++;
541 buf[i] = '\0';
542
543 err = strict_strtoul(&buf[valp], 16, &user_value);
544 if (err)
545 return err;
546 if (user_reg > 0xff)
547 return -EINVAL;
548
549 value = (u8) user_value;
550 ab3100_set_register(ab3100, reg, value);
551 ab3100_get_register(ab3100, reg, &regvalue);
552
553 dev_info(ab3100->dev,
554 "debug write reg[0x%02x] with 0x%02x, "
555 "after readback: 0x%02x\n",
556 reg, value, regvalue);
557 }
558 return buf_size;
559}
560
561static const struct file_operations ab3100_get_set_reg_fops = {
562 .open = ab3100_get_set_reg_open_file,
563 .write = ab3100_get_set_reg,
564};
565
566static struct dentry *ab3100_dir;
567static struct dentry *ab3100_reg_file;
568static struct ab3100_get_set_reg_priv ab3100_get_priv;
569static struct dentry *ab3100_get_reg_file;
570static struct ab3100_get_set_reg_priv ab3100_set_priv;
571static struct dentry *ab3100_set_reg_file;
572
573static void ab3100_setup_debugfs(struct ab3100 *ab3100)
574{
575 int err;
576
577 ab3100_dir = debugfs_create_dir("ab3100", NULL);
578 if (!ab3100_dir)
579 goto exit_no_debugfs;
580
581 ab3100_reg_file = debugfs_create_file("registers",
582 S_IRUGO, ab3100_dir, ab3100,
583 &ab3100_registers_fops);
584 if (!ab3100_reg_file) {
585 err = -ENOMEM;
586 goto exit_destroy_dir;
587 }
588
589 ab3100_get_priv.ab3100 = ab3100;
590 ab3100_get_priv.mode = false;
591 ab3100_get_reg_file = debugfs_create_file("get_reg",
592 S_IWUGO, ab3100_dir, &ab3100_get_priv,
593 &ab3100_get_set_reg_fops);
594 if (!ab3100_get_reg_file) {
595 err = -ENOMEM;
596 goto exit_destroy_reg;
597 }
598
599 ab3100_set_priv.ab3100 = ab3100;
600 ab3100_set_priv.mode = true;
601 ab3100_set_reg_file = debugfs_create_file("set_reg",
602 S_IWUGO, ab3100_dir, &ab3100_set_priv,
603 &ab3100_get_set_reg_fops);
604 if (!ab3100_set_reg_file) {
605 err = -ENOMEM;
606 goto exit_destroy_get_reg;
607 }
608 return;
609
610 exit_destroy_get_reg:
611 debugfs_remove(ab3100_get_reg_file);
612 exit_destroy_reg:
613 debugfs_remove(ab3100_reg_file);
614 exit_destroy_dir:
615 debugfs_remove(ab3100_dir);
616 exit_no_debugfs:
617 return;
618}
619static inline void ab3100_remove_debugfs(void)
620{
621 debugfs_remove(ab3100_set_reg_file);
622 debugfs_remove(ab3100_get_reg_file);
623 debugfs_remove(ab3100_reg_file);
624 debugfs_remove(ab3100_dir);
625}
626#else
627static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
628{
629}
630static inline void ab3100_remove_debugfs(void)
631{
632}
633#endif
634
635/*
636 * Basic set-up, datastructure creation/destruction and I2C interface.
637 * This sets up a default config in the AB3100 chip so that it
638 * will work as expected.
639 */
640
641struct ab3100_init_setting {
642 u8 abreg;
643 u8 setting;
644};
645
646static const struct ab3100_init_setting __initdata
647ab3100_init_settings[] = {
648 {
649 .abreg = AB3100_MCA,
650 .setting = 0x01
651 }, {
652 .abreg = AB3100_MCB,
653 .setting = 0x30
654 }, {
655 .abreg = AB3100_IMRA1,
656 .setting = 0x00
657 }, {
658 .abreg = AB3100_IMRA2,
659 .setting = 0xFF
660 }, {
661 .abreg = AB3100_IMRA3,
662 .setting = 0x01
663 }, {
664 .abreg = AB3100_IMRB1,
665 .setting = 0xFF
666 }, {
667 .abreg = AB3100_IMRB2,
668 .setting = 0xFF
669 }, {
670 .abreg = AB3100_IMRB3,
671 .setting = 0xFF
672 }, {
673 .abreg = AB3100_SUP,
674 .setting = 0x00
675 }, {
676 .abreg = AB3100_DIS,
677 .setting = 0xF0
678 }, {
679 .abreg = AB3100_D0C,
680 .setting = 0x00
681 }, {
682 .abreg = AB3100_D1C,
683 .setting = 0x00
684 }, {
685 .abreg = AB3100_D2C,
686 .setting = 0x00
687 }, {
688 .abreg = AB3100_D3C,
689 .setting = 0x00
690 },
691};
692
693static int __init ab3100_setup(struct ab3100 *ab3100)
694{
695 int err = 0;
696 int i;
697
698 for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
699 err = ab3100_set_register(ab3100,
700 ab3100_init_settings[i].abreg,
701 ab3100_init_settings[i].setting);
702 if (err)
703 goto exit_no_setup;
704 }
705
706 /*
707 * Special trick to make the AB3100 use the 32kHz clock (RTC)
708 * bit 3 in test registe 0x02 is a special, undocumented test
709 * register bit that only exist in AB3100 P1E
710 */
711 if (ab3100->chip_id == 0xc4) {
712 dev_warn(ab3100->dev,
713 "AB3100 P1E variant detected, "
714 "forcing chip to 32KHz\n");
715 err = ab3100_set_test_register(ab3100, 0x02, 0x08);
716 }
717
718 exit_no_setup:
719 return err;
720}
721
722/*
723 * Here we define all the platform devices that appear
724 * as children of the AB3100. These are regular platform
725 * devices with the IORESOURCE_IO .start and .end set
726 * to correspond to the internal AB3100 register range
727 * mapping to the corresponding subdevice.
728 */
729
730#define AB3100_DEVICE(devname, devid) \
731static struct platform_device ab3100_##devname##_device = { \
732 .name = devid, \
733 .id = -1, \
734}
735
736/*
737 * This lists all the subdevices and corresponding register
738 * ranges.
739 */
740AB3100_DEVICE(dac, "ab3100-dac");
741AB3100_DEVICE(leds, "ab3100-leds");
742AB3100_DEVICE(power, "ab3100-power");
743AB3100_DEVICE(regulators, "ab3100-regulators");
744AB3100_DEVICE(sim, "ab3100-sim");
745AB3100_DEVICE(uart, "ab3100-uart");
746AB3100_DEVICE(rtc, "ab3100-rtc");
747AB3100_DEVICE(charger, "ab3100-charger");
748AB3100_DEVICE(boost, "ab3100-boost");
749AB3100_DEVICE(adc, "ab3100-adc");
750AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
751AB3100_DEVICE(vibrator, "ab3100-vibrator");
752AB3100_DEVICE(otp, "ab3100-otp");
753AB3100_DEVICE(codec, "ab3100-codec");
754
755static struct platform_device *
756ab3100_platform_devs[] = {
757 &ab3100_dac_device,
758 &ab3100_leds_device,
759 &ab3100_power_device,
760 &ab3100_regulators_device,
761 &ab3100_sim_device,
762 &ab3100_uart_device,
763 &ab3100_rtc_device,
764 &ab3100_charger_device,
765 &ab3100_boost_device,
766 &ab3100_adc_device,
767 &ab3100_fuelgauge_device,
768 &ab3100_vibrator_device,
769 &ab3100_otp_device,
770 &ab3100_codec_device,
771};
772
773struct ab_family_id {
774 u8 id;
775 char *name;
776};
777
778static const struct ab_family_id ids[] __initdata = {
779 /* AB3100 */
780 {
781 .id = 0xc0,
782 .name = "P1A"
783 }, {
784 .id = 0xc1,
785 .name = "P1B"
786 }, {
787 .id = 0xc2,
788 .name = "P1C"
789 }, {
790 .id = 0xc3,
791 .name = "P1D"
792 }, {
793 .id = 0xc4,
794 .name = "P1E"
795 }, {
796 .id = 0xc5,
797 .name = "P1F/R1A"
798 }, {
799 .id = 0xc6,
800 .name = "P1G/R1A"
801 }, {
802 .id = 0xc7,
803 .name = "P2A/R2A"
804 }, {
805 .id = 0xc8,
806 .name = "P2B/R2B"
807 },
808 /* AB3000 variants, not supported */
809 {
810 .id = 0xa0
811 }, {
812 .id = 0xa1
813 }, {
814 .id = 0xa2
815 }, {
816 .id = 0xa3
817 }, {
818 .id = 0xa4
819 }, {
820 .id = 0xa5
821 }, {
822 .id = 0xa6
823 }, {
824 .id = 0xa7
825 },
826 /* Terminator */
827 {
828 .id = 0x00,
829 },
830};
831
832static int __init ab3100_probe(struct i2c_client *client,
833 const struct i2c_device_id *id)
834{
835 struct ab3100 *ab3100;
836 int err;
837 int i;
838
839 ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
840 if (!ab3100) {
841 dev_err(&client->dev, "could not allocate AB3100 device\n");
842 return -ENOMEM;
843 }
844
845 /* Initialize data structure */
846 mutex_init(&ab3100->access_mutex);
847 BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
848
849 ab3100->i2c_client = client;
850 ab3100->dev = &ab3100->i2c_client->dev;
851
852 i2c_set_clientdata(client, ab3100);
853
854 /* Read chip ID register */
855 err = ab3100_get_register(ab3100, AB3100_CID,
856 &ab3100->chip_id);
857 if (err) {
858 dev_err(&client->dev,
859 "could not communicate with the AB3100 analog "
860 "baseband chip\n");
861 goto exit_no_detect;
862 }
863
864 for (i = 0; ids[i].id != 0x0; i++) {
865 if (ids[i].id == ab3100->chip_id) {
866 if (ids[i].name != NULL) {
867 snprintf(&ab3100->chip_name[0],
868 sizeof(ab3100->chip_name) - 1,
869 "AB3100 %s",
870 ids[i].name);
871 break;
872 } else {
873 dev_err(&client->dev,
874 "AB3000 is not supported\n");
875 goto exit_no_detect;
876 }
877 }
878 }
879
880 if (ids[i].id == 0x0) {
881 dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
882 ab3100->chip_id);
883 dev_err(&client->dev, "accepting it anyway. Please update "
884 "the driver.\n");
885 goto exit_no_detect;
886 }
887
888 dev_info(&client->dev, "Detected chip: %s\n",
889 &ab3100->chip_name[0]);
890
891 /* Attach a second dummy i2c_client to the test register address */
892 ab3100->testreg_client = i2c_new_dummy(client->adapter,
893 client->addr + 1);
894 if (!ab3100->testreg_client) {
895 err = -ENOMEM;
896 goto exit_no_testreg_client;
897 }
898
899 strlcpy(ab3100->testreg_client->name, id->name,
900 sizeof(ab3100->testreg_client->name));
901
902 err = ab3100_setup(ab3100);
903 if (err)
904 goto exit_no_setup;
905
906 INIT_WORK(&ab3100->work, ab3100_work);
907
908 /* This real unpredictable IRQ is of course sampled for entropy */
909 err = request_irq(client->irq, ab3100_irq_handler,
910 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
911 "AB3100 IRQ", ab3100);
912 if (err)
913 goto exit_no_irq;
914
915 /* Set parent and a pointer back to the container in device data */
916 for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
917 ab3100_platform_devs[i]->dev.parent =
918 &client->dev;
919 platform_set_drvdata(ab3100_platform_devs[i], ab3100);
920 }
921
922 /* Register the platform devices */
923 platform_add_devices(ab3100_platform_devs,
924 ARRAY_SIZE(ab3100_platform_devs));
925
926 ab3100_setup_debugfs(ab3100);
927
928 return 0;
929
930 exit_no_irq:
931 exit_no_setup:
932 i2c_unregister_device(ab3100->testreg_client);
933 exit_no_testreg_client:
934 exit_no_detect:
935 kfree(ab3100);
936 return err;
937}
938
939static int __exit ab3100_remove(struct i2c_client *client)
940{
941 struct ab3100 *ab3100 = i2c_get_clientdata(client);
942 int i;
943
944 /* Unregister subdevices */
945 for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
946 platform_device_unregister(ab3100_platform_devs[i]);
947
948 ab3100_remove_debugfs();
949 i2c_unregister_device(ab3100->testreg_client);
950
951 /*
952 * At this point, all subscribers should have unregistered
953 * their notifiers so deactivate IRQ
954 */
955 free_irq(client->irq, ab3100);
956 kfree(ab3100);
957 return 0;
958}
959
960static const struct i2c_device_id ab3100_id[] = {
961 { "ab3100", ab3100 },
962 { }
963};
964MODULE_DEVICE_TABLE(i2c, ab3100_id);
965
966static struct i2c_driver ab3100_driver = {
967 .driver = {
968 .name = "ab3100",
969 .owner = THIS_MODULE,
970 },
971 .id_table = ab3100_id,
972 .probe = ab3100_probe,
973 .remove = __exit_p(ab3100_remove),
974};
975
976static int __init ab3100_i2c_init(void)
977{
978 return i2c_add_driver(&ab3100_driver);
979}
980
981static void __exit ab3100_i2c_exit(void)
982{
983 i2c_del_driver(&ab3100_driver);
984}
985
986subsys_initcall(ab3100_i2c_init);
987module_exit(ab3100_i2c_exit);
988
989MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
990MODULE_DESCRIPTION("AB3100 core driver");
991MODULE_LICENSE("GPL");