Jassi Brar | 7507061 | 2010-05-14 15:18:54 +0100 | [diff] [blame] | 1 | /* linux/arch/arm/common/pl330.c |
| 2 | * |
| 3 | * Copyright (C) 2010 Samsung Electronics Co Ltd. |
| 4 | * Jaswinder Singh <jassi.brar@samsung.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 19 | */ |
| 20 | |
| 21 | #include <linux/kernel.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/string.h> |
| 26 | #include <linux/io.h> |
| 27 | #include <linux/delay.h> |
| 28 | #include <linux/interrupt.h> |
| 29 | #include <linux/dma-mapping.h> |
| 30 | |
| 31 | #include <asm/hardware/pl330.h> |
| 32 | |
| 33 | /* Register and Bit field Definitions */ |
| 34 | #define DS 0x0 |
| 35 | #define DS_ST_STOP 0x0 |
| 36 | #define DS_ST_EXEC 0x1 |
| 37 | #define DS_ST_CMISS 0x2 |
| 38 | #define DS_ST_UPDTPC 0x3 |
| 39 | #define DS_ST_WFE 0x4 |
| 40 | #define DS_ST_ATBRR 0x5 |
| 41 | #define DS_ST_QBUSY 0x6 |
| 42 | #define DS_ST_WFP 0x7 |
| 43 | #define DS_ST_KILL 0x8 |
| 44 | #define DS_ST_CMPLT 0x9 |
| 45 | #define DS_ST_FLTCMP 0xe |
| 46 | #define DS_ST_FAULT 0xf |
| 47 | |
| 48 | #define DPC 0x4 |
| 49 | #define INTEN 0x20 |
| 50 | #define ES 0x24 |
| 51 | #define INTSTATUS 0x28 |
| 52 | #define INTCLR 0x2c |
| 53 | #define FSM 0x30 |
| 54 | #define FSC 0x34 |
| 55 | #define FTM 0x38 |
| 56 | |
| 57 | #define _FTC 0x40 |
| 58 | #define FTC(n) (_FTC + (n)*0x4) |
| 59 | |
| 60 | #define _CS 0x100 |
| 61 | #define CS(n) (_CS + (n)*0x8) |
| 62 | #define CS_CNS (1 << 21) |
| 63 | |
| 64 | #define _CPC 0x104 |
| 65 | #define CPC(n) (_CPC + (n)*0x8) |
| 66 | |
| 67 | #define _SA 0x400 |
| 68 | #define SA(n) (_SA + (n)*0x20) |
| 69 | |
| 70 | #define _DA 0x404 |
| 71 | #define DA(n) (_DA + (n)*0x20) |
| 72 | |
| 73 | #define _CC 0x408 |
| 74 | #define CC(n) (_CC + (n)*0x20) |
| 75 | |
| 76 | #define CC_SRCINC (1 << 0) |
| 77 | #define CC_DSTINC (1 << 14) |
| 78 | #define CC_SRCPRI (1 << 8) |
| 79 | #define CC_DSTPRI (1 << 22) |
| 80 | #define CC_SRCNS (1 << 9) |
| 81 | #define CC_DSTNS (1 << 23) |
| 82 | #define CC_SRCIA (1 << 10) |
| 83 | #define CC_DSTIA (1 << 24) |
| 84 | #define CC_SRCBRSTLEN_SHFT 4 |
| 85 | #define CC_DSTBRSTLEN_SHFT 18 |
| 86 | #define CC_SRCBRSTSIZE_SHFT 1 |
| 87 | #define CC_DSTBRSTSIZE_SHFT 15 |
| 88 | #define CC_SRCCCTRL_SHFT 11 |
| 89 | #define CC_SRCCCTRL_MASK 0x7 |
| 90 | #define CC_DSTCCTRL_SHFT 25 |
| 91 | #define CC_DRCCCTRL_MASK 0x7 |
| 92 | #define CC_SWAP_SHFT 28 |
| 93 | |
| 94 | #define _LC0 0x40c |
| 95 | #define LC0(n) (_LC0 + (n)*0x20) |
| 96 | |
| 97 | #define _LC1 0x410 |
| 98 | #define LC1(n) (_LC1 + (n)*0x20) |
| 99 | |
| 100 | #define DBGSTATUS 0xd00 |
| 101 | #define DBG_BUSY (1 << 0) |
| 102 | |
| 103 | #define DBGCMD 0xd04 |
| 104 | #define DBGINST0 0xd08 |
| 105 | #define DBGINST1 0xd0c |
| 106 | |
| 107 | #define CR0 0xe00 |
| 108 | #define CR1 0xe04 |
| 109 | #define CR2 0xe08 |
| 110 | #define CR3 0xe0c |
| 111 | #define CR4 0xe10 |
| 112 | #define CRD 0xe14 |
| 113 | |
| 114 | #define PERIPH_ID 0xfe0 |
| 115 | #define PCELL_ID 0xff0 |
| 116 | |
| 117 | #define CR0_PERIPH_REQ_SET (1 << 0) |
| 118 | #define CR0_BOOT_EN_SET (1 << 1) |
| 119 | #define CR0_BOOT_MAN_NS (1 << 2) |
| 120 | #define CR0_NUM_CHANS_SHIFT 4 |
| 121 | #define CR0_NUM_CHANS_MASK 0x7 |
| 122 | #define CR0_NUM_PERIPH_SHIFT 12 |
| 123 | #define CR0_NUM_PERIPH_MASK 0x1f |
| 124 | #define CR0_NUM_EVENTS_SHIFT 17 |
| 125 | #define CR0_NUM_EVENTS_MASK 0x1f |
| 126 | |
| 127 | #define CR1_ICACHE_LEN_SHIFT 0 |
| 128 | #define CR1_ICACHE_LEN_MASK 0x7 |
| 129 | #define CR1_NUM_ICACHELINES_SHIFT 4 |
| 130 | #define CR1_NUM_ICACHELINES_MASK 0xf |
| 131 | |
| 132 | #define CRD_DATA_WIDTH_SHIFT 0 |
| 133 | #define CRD_DATA_WIDTH_MASK 0x7 |
| 134 | #define CRD_WR_CAP_SHIFT 4 |
| 135 | #define CRD_WR_CAP_MASK 0x7 |
| 136 | #define CRD_WR_Q_DEP_SHIFT 8 |
| 137 | #define CRD_WR_Q_DEP_MASK 0xf |
| 138 | #define CRD_RD_CAP_SHIFT 12 |
| 139 | #define CRD_RD_CAP_MASK 0x7 |
| 140 | #define CRD_RD_Q_DEP_SHIFT 16 |
| 141 | #define CRD_RD_Q_DEP_MASK 0xf |
| 142 | #define CRD_DATA_BUFF_SHIFT 20 |
| 143 | #define CRD_DATA_BUFF_MASK 0x3ff |
| 144 | |
| 145 | #define PART 0x330 |
| 146 | #define DESIGNER 0x41 |
| 147 | #define REVISION 0x0 |
| 148 | #define INTEG_CFG 0x0 |
| 149 | #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \ |
| 150 | | (REVISION << 20) | (INTEG_CFG << 24)) |
| 151 | |
| 152 | #define PCELL_ID_VAL 0xb105f00d |
| 153 | |
| 154 | #define PL330_STATE_STOPPED (1 << 0) |
| 155 | #define PL330_STATE_EXECUTING (1 << 1) |
| 156 | #define PL330_STATE_WFE (1 << 2) |
| 157 | #define PL330_STATE_FAULTING (1 << 3) |
| 158 | #define PL330_STATE_COMPLETING (1 << 4) |
| 159 | #define PL330_STATE_WFP (1 << 5) |
| 160 | #define PL330_STATE_KILLING (1 << 6) |
| 161 | #define PL330_STATE_FAULT_COMPLETING (1 << 7) |
| 162 | #define PL330_STATE_CACHEMISS (1 << 8) |
| 163 | #define PL330_STATE_UPDTPC (1 << 9) |
| 164 | #define PL330_STATE_ATBARRIER (1 << 10) |
| 165 | #define PL330_STATE_QUEUEBUSY (1 << 11) |
| 166 | #define PL330_STATE_INVALID (1 << 15) |
| 167 | |
| 168 | #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ |
| 169 | | PL330_STATE_WFE | PL330_STATE_FAULTING) |
| 170 | |
| 171 | #define CMD_DMAADDH 0x54 |
| 172 | #define CMD_DMAEND 0x00 |
| 173 | #define CMD_DMAFLUSHP 0x35 |
| 174 | #define CMD_DMAGO 0xa0 |
| 175 | #define CMD_DMALD 0x04 |
| 176 | #define CMD_DMALDP 0x25 |
| 177 | #define CMD_DMALP 0x20 |
| 178 | #define CMD_DMALPEND 0x28 |
| 179 | #define CMD_DMAKILL 0x01 |
| 180 | #define CMD_DMAMOV 0xbc |
| 181 | #define CMD_DMANOP 0x18 |
| 182 | #define CMD_DMARMB 0x12 |
| 183 | #define CMD_DMASEV 0x34 |
| 184 | #define CMD_DMAST 0x08 |
| 185 | #define CMD_DMASTP 0x29 |
| 186 | #define CMD_DMASTZ 0x0c |
| 187 | #define CMD_DMAWFE 0x36 |
| 188 | #define CMD_DMAWFP 0x30 |
| 189 | #define CMD_DMAWMB 0x13 |
| 190 | |
| 191 | #define SZ_DMAADDH 3 |
| 192 | #define SZ_DMAEND 1 |
| 193 | #define SZ_DMAFLUSHP 2 |
| 194 | #define SZ_DMALD 1 |
| 195 | #define SZ_DMALDP 2 |
| 196 | #define SZ_DMALP 2 |
| 197 | #define SZ_DMALPEND 2 |
| 198 | #define SZ_DMAKILL 1 |
| 199 | #define SZ_DMAMOV 6 |
| 200 | #define SZ_DMANOP 1 |
| 201 | #define SZ_DMARMB 1 |
| 202 | #define SZ_DMASEV 2 |
| 203 | #define SZ_DMAST 1 |
| 204 | #define SZ_DMASTP 2 |
| 205 | #define SZ_DMASTZ 1 |
| 206 | #define SZ_DMAWFE 2 |
| 207 | #define SZ_DMAWFP 2 |
| 208 | #define SZ_DMAWMB 1 |
| 209 | #define SZ_DMAGO 6 |
| 210 | |
| 211 | #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) |
| 212 | #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) |
| 213 | |
| 214 | #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) |
| 215 | #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) |
| 216 | |
| 217 | /* |
| 218 | * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req |
| 219 | * at 1byte/burst for P<->M and M<->M respectively. |
| 220 | * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req |
| 221 | * should be enough for P<->M and M<->M respectively. |
| 222 | */ |
| 223 | #define MCODE_BUFF_PER_REQ 256 |
| 224 | |
| 225 | /* |
| 226 | * Mark a _pl330_req as free. |
| 227 | * We do it by writing DMAEND as the first instruction |
| 228 | * because no valid request is going to have DMAEND as |
| 229 | * its first instruction to execute. |
| 230 | */ |
| 231 | #define MARK_FREE(req) do { \ |
| 232 | _emit_END(0, (req)->mc_cpu); \ |
| 233 | (req)->mc_len = 0; \ |
| 234 | } while (0) |
| 235 | |
| 236 | /* If the _pl330_req is available to the client */ |
| 237 | #define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) |
| 238 | |
| 239 | /* Use this _only_ to wait on transient states */ |
| 240 | #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); |
| 241 | |
| 242 | #ifdef PL330_DEBUG_MCGEN |
| 243 | static unsigned cmd_line; |
| 244 | #define PL330_DBGCMD_DUMP(off, x...) do { \ |
| 245 | printk("%x:", cmd_line); \ |
| 246 | printk(x); \ |
| 247 | cmd_line += off; \ |
| 248 | } while (0) |
| 249 | #define PL330_DBGMC_START(addr) (cmd_line = addr) |
| 250 | #else |
| 251 | #define PL330_DBGCMD_DUMP(off, x...) do {} while (0) |
| 252 | #define PL330_DBGMC_START(addr) do {} while (0) |
| 253 | #endif |
| 254 | |
| 255 | struct _xfer_spec { |
| 256 | u32 ccr; |
| 257 | struct pl330_req *r; |
| 258 | struct pl330_xfer *x; |
| 259 | }; |
| 260 | |
| 261 | enum dmamov_dst { |
| 262 | SAR = 0, |
| 263 | CCR, |
| 264 | DAR, |
| 265 | }; |
| 266 | |
| 267 | enum pl330_dst { |
| 268 | SRC = 0, |
| 269 | DST, |
| 270 | }; |
| 271 | |
| 272 | enum pl330_cond { |
| 273 | SINGLE, |
| 274 | BURST, |
| 275 | ALWAYS, |
| 276 | }; |
| 277 | |
| 278 | struct _pl330_req { |
| 279 | u32 mc_bus; |
| 280 | void *mc_cpu; |
| 281 | /* Number of bytes taken to setup MC for the req */ |
| 282 | u32 mc_len; |
| 283 | struct pl330_req *r; |
| 284 | /* Hook to attach to DMAC's list of reqs with due callback */ |
| 285 | struct list_head rqd; |
| 286 | }; |
| 287 | |
| 288 | /* ToBeDone for tasklet */ |
| 289 | struct _pl330_tbd { |
| 290 | bool reset_dmac; |
| 291 | bool reset_mngr; |
| 292 | u8 reset_chan; |
| 293 | }; |
| 294 | |
| 295 | /* A DMAC Thread */ |
| 296 | struct pl330_thread { |
| 297 | u8 id; |
| 298 | int ev; |
| 299 | /* If the channel is not yet acquired by any client */ |
| 300 | bool free; |
| 301 | /* Parent DMAC */ |
| 302 | struct pl330_dmac *dmac; |
| 303 | /* Only two at a time */ |
| 304 | struct _pl330_req req[2]; |
| 305 | /* Index of the last submitted request */ |
| 306 | unsigned lstenq; |
| 307 | }; |
| 308 | |
| 309 | enum pl330_dmac_state { |
| 310 | UNINIT, |
| 311 | INIT, |
| 312 | DYING, |
| 313 | }; |
| 314 | |
| 315 | /* A DMAC */ |
| 316 | struct pl330_dmac { |
| 317 | spinlock_t lock; |
| 318 | /* Holds list of reqs with due callbacks */ |
| 319 | struct list_head req_done; |
| 320 | /* Pointer to platform specific stuff */ |
| 321 | struct pl330_info *pinfo; |
| 322 | /* Maximum possible events/irqs */ |
| 323 | int events[32]; |
| 324 | /* BUS address of MicroCode buffer */ |
| 325 | u32 mcode_bus; |
| 326 | /* CPU address of MicroCode buffer */ |
| 327 | void *mcode_cpu; |
| 328 | /* List of all Channel threads */ |
| 329 | struct pl330_thread *channels; |
| 330 | /* Pointer to the MANAGER thread */ |
| 331 | struct pl330_thread *manager; |
| 332 | /* To handle bad news in interrupt */ |
| 333 | struct tasklet_struct tasks; |
| 334 | struct _pl330_tbd dmac_tbd; |
| 335 | /* State of DMAC operation */ |
| 336 | enum pl330_dmac_state state; |
| 337 | }; |
| 338 | |
| 339 | static inline void _callback(struct pl330_req *r, enum pl330_op_err err) |
| 340 | { |
| 341 | if (r && r->xfer_cb) |
| 342 | r->xfer_cb(r->token, err); |
| 343 | } |
| 344 | |
| 345 | static inline bool _queue_empty(struct pl330_thread *thrd) |
| 346 | { |
| 347 | return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) |
| 348 | ? true : false; |
| 349 | } |
| 350 | |
| 351 | static inline bool _queue_full(struct pl330_thread *thrd) |
| 352 | { |
| 353 | return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) |
| 354 | ? false : true; |
| 355 | } |
| 356 | |
| 357 | static inline bool is_manager(struct pl330_thread *thrd) |
| 358 | { |
| 359 | struct pl330_dmac *pl330 = thrd->dmac; |
| 360 | |
| 361 | /* MANAGER is indexed at the end */ |
| 362 | if (thrd->id == pl330->pinfo->pcfg.num_chan) |
| 363 | return true; |
| 364 | else |
| 365 | return false; |
| 366 | } |
| 367 | |
| 368 | /* If manager of the thread is in Non-Secure mode */ |
| 369 | static inline bool _manager_ns(struct pl330_thread *thrd) |
| 370 | { |
| 371 | struct pl330_dmac *pl330 = thrd->dmac; |
| 372 | |
| 373 | return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; |
| 374 | } |
| 375 | |
| 376 | static inline u32 get_id(struct pl330_info *pi, u32 off) |
| 377 | { |
| 378 | void __iomem *regs = pi->base; |
| 379 | u32 id = 0; |
| 380 | |
| 381 | id |= (readb(regs + off + 0x0) << 0); |
| 382 | id |= (readb(regs + off + 0x4) << 8); |
| 383 | id |= (readb(regs + off + 0x8) << 16); |
| 384 | id |= (readb(regs + off + 0xc) << 24); |
| 385 | |
| 386 | return id; |
| 387 | } |
| 388 | |
| 389 | static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], |
| 390 | enum pl330_dst da, u16 val) |
| 391 | { |
| 392 | if (dry_run) |
| 393 | return SZ_DMAADDH; |
| 394 | |
| 395 | buf[0] = CMD_DMAADDH; |
| 396 | buf[0] |= (da << 1); |
| 397 | *((u16 *)&buf[1]) = val; |
| 398 | |
| 399 | PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", |
| 400 | da == 1 ? "DA" : "SA", val); |
| 401 | |
| 402 | return SZ_DMAADDH; |
| 403 | } |
| 404 | |
| 405 | static inline u32 _emit_END(unsigned dry_run, u8 buf[]) |
| 406 | { |
| 407 | if (dry_run) |
| 408 | return SZ_DMAEND; |
| 409 | |
| 410 | buf[0] = CMD_DMAEND; |
| 411 | |
| 412 | PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); |
| 413 | |
| 414 | return SZ_DMAEND; |
| 415 | } |
| 416 | |
| 417 | static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) |
| 418 | { |
| 419 | if (dry_run) |
| 420 | return SZ_DMAFLUSHP; |
| 421 | |
| 422 | buf[0] = CMD_DMAFLUSHP; |
| 423 | |
| 424 | peri &= 0x1f; |
| 425 | peri <<= 3; |
| 426 | buf[1] = peri; |
| 427 | |
| 428 | PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); |
| 429 | |
| 430 | return SZ_DMAFLUSHP; |
| 431 | } |
| 432 | |
| 433 | static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) |
| 434 | { |
| 435 | if (dry_run) |
| 436 | return SZ_DMALD; |
| 437 | |
| 438 | buf[0] = CMD_DMALD; |
| 439 | |
| 440 | if (cond == SINGLE) |
| 441 | buf[0] |= (0 << 1) | (1 << 0); |
| 442 | else if (cond == BURST) |
| 443 | buf[0] |= (1 << 1) | (1 << 0); |
| 444 | |
| 445 | PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", |
| 446 | cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); |
| 447 | |
| 448 | return SZ_DMALD; |
| 449 | } |
| 450 | |
| 451 | static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], |
| 452 | enum pl330_cond cond, u8 peri) |
| 453 | { |
| 454 | if (dry_run) |
| 455 | return SZ_DMALDP; |
| 456 | |
| 457 | buf[0] = CMD_DMALDP; |
| 458 | |
| 459 | if (cond == BURST) |
| 460 | buf[0] |= (1 << 1); |
| 461 | |
| 462 | peri &= 0x1f; |
| 463 | peri <<= 3; |
| 464 | buf[1] = peri; |
| 465 | |
| 466 | PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", |
| 467 | cond == SINGLE ? 'S' : 'B', peri >> 3); |
| 468 | |
| 469 | return SZ_DMALDP; |
| 470 | } |
| 471 | |
| 472 | static inline u32 _emit_LP(unsigned dry_run, u8 buf[], |
| 473 | unsigned loop, u8 cnt) |
| 474 | { |
| 475 | if (dry_run) |
| 476 | return SZ_DMALP; |
| 477 | |
| 478 | buf[0] = CMD_DMALP; |
| 479 | |
| 480 | if (loop) |
| 481 | buf[0] |= (1 << 1); |
| 482 | |
| 483 | cnt--; /* DMAC increments by 1 internally */ |
| 484 | buf[1] = cnt; |
| 485 | |
| 486 | PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); |
| 487 | |
| 488 | return SZ_DMALP; |
| 489 | } |
| 490 | |
| 491 | struct _arg_LPEND { |
| 492 | enum pl330_cond cond; |
| 493 | bool forever; |
| 494 | unsigned loop; |
| 495 | u8 bjump; |
| 496 | }; |
| 497 | |
| 498 | static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], |
| 499 | const struct _arg_LPEND *arg) |
| 500 | { |
| 501 | enum pl330_cond cond = arg->cond; |
| 502 | bool forever = arg->forever; |
| 503 | unsigned loop = arg->loop; |
| 504 | u8 bjump = arg->bjump; |
| 505 | |
| 506 | if (dry_run) |
| 507 | return SZ_DMALPEND; |
| 508 | |
| 509 | buf[0] = CMD_DMALPEND; |
| 510 | |
| 511 | if (loop) |
| 512 | buf[0] |= (1 << 2); |
| 513 | |
| 514 | if (!forever) |
| 515 | buf[0] |= (1 << 4); |
| 516 | |
| 517 | if (cond == SINGLE) |
| 518 | buf[0] |= (0 << 1) | (1 << 0); |
| 519 | else if (cond == BURST) |
| 520 | buf[0] |= (1 << 1) | (1 << 0); |
| 521 | |
| 522 | buf[1] = bjump; |
| 523 | |
| 524 | PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", |
| 525 | forever ? "FE" : "END", |
| 526 | cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), |
| 527 | loop ? '1' : '0', |
| 528 | bjump); |
| 529 | |
| 530 | return SZ_DMALPEND; |
| 531 | } |
| 532 | |
| 533 | static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) |
| 534 | { |
| 535 | if (dry_run) |
| 536 | return SZ_DMAKILL; |
| 537 | |
| 538 | buf[0] = CMD_DMAKILL; |
| 539 | |
| 540 | return SZ_DMAKILL; |
| 541 | } |
| 542 | |
| 543 | static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], |
| 544 | enum dmamov_dst dst, u32 val) |
| 545 | { |
| 546 | if (dry_run) |
| 547 | return SZ_DMAMOV; |
| 548 | |
| 549 | buf[0] = CMD_DMAMOV; |
| 550 | buf[1] = dst; |
| 551 | *((u32 *)&buf[2]) = val; |
| 552 | |
| 553 | PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", |
| 554 | dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); |
| 555 | |
| 556 | return SZ_DMAMOV; |
| 557 | } |
| 558 | |
| 559 | static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) |
| 560 | { |
| 561 | if (dry_run) |
| 562 | return SZ_DMANOP; |
| 563 | |
| 564 | buf[0] = CMD_DMANOP; |
| 565 | |
| 566 | PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); |
| 567 | |
| 568 | return SZ_DMANOP; |
| 569 | } |
| 570 | |
| 571 | static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) |
| 572 | { |
| 573 | if (dry_run) |
| 574 | return SZ_DMARMB; |
| 575 | |
| 576 | buf[0] = CMD_DMARMB; |
| 577 | |
| 578 | PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); |
| 579 | |
| 580 | return SZ_DMARMB; |
| 581 | } |
| 582 | |
| 583 | static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) |
| 584 | { |
| 585 | if (dry_run) |
| 586 | return SZ_DMASEV; |
| 587 | |
| 588 | buf[0] = CMD_DMASEV; |
| 589 | |
| 590 | ev &= 0x1f; |
| 591 | ev <<= 3; |
| 592 | buf[1] = ev; |
| 593 | |
| 594 | PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); |
| 595 | |
| 596 | return SZ_DMASEV; |
| 597 | } |
| 598 | |
| 599 | static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) |
| 600 | { |
| 601 | if (dry_run) |
| 602 | return SZ_DMAST; |
| 603 | |
| 604 | buf[0] = CMD_DMAST; |
| 605 | |
| 606 | if (cond == SINGLE) |
| 607 | buf[0] |= (0 << 1) | (1 << 0); |
| 608 | else if (cond == BURST) |
| 609 | buf[0] |= (1 << 1) | (1 << 0); |
| 610 | |
| 611 | PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", |
| 612 | cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); |
| 613 | |
| 614 | return SZ_DMAST; |
| 615 | } |
| 616 | |
| 617 | static inline u32 _emit_STP(unsigned dry_run, u8 buf[], |
| 618 | enum pl330_cond cond, u8 peri) |
| 619 | { |
| 620 | if (dry_run) |
| 621 | return SZ_DMASTP; |
| 622 | |
| 623 | buf[0] = CMD_DMASTP; |
| 624 | |
| 625 | if (cond == BURST) |
| 626 | buf[0] |= (1 << 1); |
| 627 | |
| 628 | peri &= 0x1f; |
| 629 | peri <<= 3; |
| 630 | buf[1] = peri; |
| 631 | |
| 632 | PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", |
| 633 | cond == SINGLE ? 'S' : 'B', peri >> 3); |
| 634 | |
| 635 | return SZ_DMASTP; |
| 636 | } |
| 637 | |
| 638 | static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) |
| 639 | { |
| 640 | if (dry_run) |
| 641 | return SZ_DMASTZ; |
| 642 | |
| 643 | buf[0] = CMD_DMASTZ; |
| 644 | |
| 645 | PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); |
| 646 | |
| 647 | return SZ_DMASTZ; |
| 648 | } |
| 649 | |
| 650 | static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, |
| 651 | unsigned invalidate) |
| 652 | { |
| 653 | if (dry_run) |
| 654 | return SZ_DMAWFE; |
| 655 | |
| 656 | buf[0] = CMD_DMAWFE; |
| 657 | |
| 658 | ev &= 0x1f; |
| 659 | ev <<= 3; |
| 660 | buf[1] = ev; |
| 661 | |
| 662 | if (invalidate) |
| 663 | buf[1] |= (1 << 1); |
| 664 | |
| 665 | PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", |
| 666 | ev >> 3, invalidate ? ", I" : ""); |
| 667 | |
| 668 | return SZ_DMAWFE; |
| 669 | } |
| 670 | |
| 671 | static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], |
| 672 | enum pl330_cond cond, u8 peri) |
| 673 | { |
| 674 | if (dry_run) |
| 675 | return SZ_DMAWFP; |
| 676 | |
| 677 | buf[0] = CMD_DMAWFP; |
| 678 | |
| 679 | if (cond == SINGLE) |
| 680 | buf[0] |= (0 << 1) | (0 << 0); |
| 681 | else if (cond == BURST) |
| 682 | buf[0] |= (1 << 1) | (0 << 0); |
| 683 | else |
| 684 | buf[0] |= (0 << 1) | (1 << 0); |
| 685 | |
| 686 | peri &= 0x1f; |
| 687 | peri <<= 3; |
| 688 | buf[1] = peri; |
| 689 | |
| 690 | PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", |
| 691 | cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); |
| 692 | |
| 693 | return SZ_DMAWFP; |
| 694 | } |
| 695 | |
| 696 | static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) |
| 697 | { |
| 698 | if (dry_run) |
| 699 | return SZ_DMAWMB; |
| 700 | |
| 701 | buf[0] = CMD_DMAWMB; |
| 702 | |
| 703 | PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); |
| 704 | |
| 705 | return SZ_DMAWMB; |
| 706 | } |
| 707 | |
| 708 | struct _arg_GO { |
| 709 | u8 chan; |
| 710 | u32 addr; |
| 711 | unsigned ns; |
| 712 | }; |
| 713 | |
| 714 | static inline u32 _emit_GO(unsigned dry_run, u8 buf[], |
| 715 | const struct _arg_GO *arg) |
| 716 | { |
| 717 | u8 chan = arg->chan; |
| 718 | u32 addr = arg->addr; |
| 719 | unsigned ns = arg->ns; |
| 720 | |
| 721 | if (dry_run) |
| 722 | return SZ_DMAGO; |
| 723 | |
| 724 | buf[0] = CMD_DMAGO; |
| 725 | buf[0] |= (ns << 1); |
| 726 | |
| 727 | buf[1] = chan & 0x7; |
| 728 | |
| 729 | *((u32 *)&buf[2]) = addr; |
| 730 | |
| 731 | return SZ_DMAGO; |
| 732 | } |
| 733 | |
| 734 | #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) |
| 735 | |
| 736 | /* Returns Time-Out */ |
| 737 | static bool _until_dmac_idle(struct pl330_thread *thrd) |
| 738 | { |
| 739 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 740 | unsigned long loops = msecs_to_loops(5); |
| 741 | |
| 742 | do { |
| 743 | /* Until Manager is Idle */ |
| 744 | if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) |
| 745 | break; |
| 746 | |
| 747 | cpu_relax(); |
| 748 | } while (--loops); |
| 749 | |
| 750 | if (!loops) |
| 751 | return true; |
| 752 | |
| 753 | return false; |
| 754 | } |
| 755 | |
| 756 | static inline void _execute_DBGINSN(struct pl330_thread *thrd, |
| 757 | u8 insn[], bool as_manager) |
| 758 | { |
| 759 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 760 | u32 val; |
| 761 | |
| 762 | val = (insn[0] << 16) | (insn[1] << 24); |
| 763 | if (!as_manager) { |
| 764 | val |= (1 << 0); |
| 765 | val |= (thrd->id << 8); /* Channel Number */ |
| 766 | } |
| 767 | writel(val, regs + DBGINST0); |
| 768 | |
| 769 | val = *((u32 *)&insn[2]); |
| 770 | writel(val, regs + DBGINST1); |
| 771 | |
| 772 | /* If timed out due to halted state-machine */ |
| 773 | if (_until_dmac_idle(thrd)) { |
| 774 | dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); |
| 775 | return; |
| 776 | } |
| 777 | |
| 778 | /* Get going */ |
| 779 | writel(0, regs + DBGCMD); |
| 780 | } |
| 781 | |
| 782 | static inline u32 _state(struct pl330_thread *thrd) |
| 783 | { |
| 784 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 785 | u32 val; |
| 786 | |
| 787 | if (is_manager(thrd)) |
| 788 | val = readl(regs + DS) & 0xf; |
| 789 | else |
| 790 | val = readl(regs + CS(thrd->id)) & 0xf; |
| 791 | |
| 792 | switch (val) { |
| 793 | case DS_ST_STOP: |
| 794 | return PL330_STATE_STOPPED; |
| 795 | case DS_ST_EXEC: |
| 796 | return PL330_STATE_EXECUTING; |
| 797 | case DS_ST_CMISS: |
| 798 | return PL330_STATE_CACHEMISS; |
| 799 | case DS_ST_UPDTPC: |
| 800 | return PL330_STATE_UPDTPC; |
| 801 | case DS_ST_WFE: |
| 802 | return PL330_STATE_WFE; |
| 803 | case DS_ST_FAULT: |
| 804 | return PL330_STATE_FAULTING; |
| 805 | case DS_ST_ATBRR: |
| 806 | if (is_manager(thrd)) |
| 807 | return PL330_STATE_INVALID; |
| 808 | else |
| 809 | return PL330_STATE_ATBARRIER; |
| 810 | case DS_ST_QBUSY: |
| 811 | if (is_manager(thrd)) |
| 812 | return PL330_STATE_INVALID; |
| 813 | else |
| 814 | return PL330_STATE_QUEUEBUSY; |
| 815 | case DS_ST_WFP: |
| 816 | if (is_manager(thrd)) |
| 817 | return PL330_STATE_INVALID; |
| 818 | else |
| 819 | return PL330_STATE_WFP; |
| 820 | case DS_ST_KILL: |
| 821 | if (is_manager(thrd)) |
| 822 | return PL330_STATE_INVALID; |
| 823 | else |
| 824 | return PL330_STATE_KILLING; |
| 825 | case DS_ST_CMPLT: |
| 826 | if (is_manager(thrd)) |
| 827 | return PL330_STATE_INVALID; |
| 828 | else |
| 829 | return PL330_STATE_COMPLETING; |
| 830 | case DS_ST_FLTCMP: |
| 831 | if (is_manager(thrd)) |
| 832 | return PL330_STATE_INVALID; |
| 833 | else |
| 834 | return PL330_STATE_FAULT_COMPLETING; |
| 835 | default: |
| 836 | return PL330_STATE_INVALID; |
| 837 | } |
| 838 | } |
| 839 | |
| 840 | /* If the request 'req' of thread 'thrd' is currently active */ |
| 841 | static inline bool _req_active(struct pl330_thread *thrd, |
| 842 | struct _pl330_req *req) |
| 843 | { |
| 844 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 845 | u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); |
| 846 | |
| 847 | if (IS_FREE(req)) |
| 848 | return false; |
| 849 | |
| 850 | return (pc >= buf && pc <= buf + req->mc_len) ? true : false; |
| 851 | } |
| 852 | |
| 853 | /* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ |
| 854 | static inline unsigned _thrd_active(struct pl330_thread *thrd) |
| 855 | { |
| 856 | if (_req_active(thrd, &thrd->req[0])) |
| 857 | return 1; /* First req active */ |
| 858 | |
| 859 | if (_req_active(thrd, &thrd->req[1])) |
| 860 | return 2; /* Second req active */ |
| 861 | |
| 862 | return 0; |
| 863 | } |
| 864 | |
| 865 | static void _stop(struct pl330_thread *thrd) |
| 866 | { |
| 867 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 868 | u8 insn[6] = {0, 0, 0, 0, 0, 0}; |
| 869 | |
| 870 | if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) |
| 871 | UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); |
| 872 | |
| 873 | /* Return if nothing needs to be done */ |
| 874 | if (_state(thrd) == PL330_STATE_COMPLETING |
| 875 | || _state(thrd) == PL330_STATE_KILLING |
| 876 | || _state(thrd) == PL330_STATE_STOPPED) |
| 877 | return; |
| 878 | |
| 879 | _emit_KILL(0, insn); |
| 880 | |
| 881 | /* Stop generating interrupts for SEV */ |
| 882 | writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); |
| 883 | |
| 884 | _execute_DBGINSN(thrd, insn, is_manager(thrd)); |
| 885 | } |
| 886 | |
| 887 | /* Start doing req 'idx' of thread 'thrd' */ |
| 888 | static bool _trigger(struct pl330_thread *thrd) |
| 889 | { |
| 890 | void __iomem *regs = thrd->dmac->pinfo->base; |
| 891 | struct _pl330_req *req; |
| 892 | struct pl330_req *r; |
| 893 | struct _arg_GO go; |
| 894 | unsigned ns; |
| 895 | u8 insn[6] = {0, 0, 0, 0, 0, 0}; |
| 896 | |
| 897 | /* Return if already ACTIVE */ |
| 898 | if (_state(thrd) != PL330_STATE_STOPPED) |
| 899 | return true; |
| 900 | |
| 901 | if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) |
| 902 | req = &thrd->req[1 - thrd->lstenq]; |
| 903 | else if (!IS_FREE(&thrd->req[thrd->lstenq])) |
| 904 | req = &thrd->req[thrd->lstenq]; |
| 905 | else |
| 906 | req = NULL; |
| 907 | |
| 908 | /* Return if no request */ |
| 909 | if (!req || !req->r) |
| 910 | return true; |
| 911 | |
| 912 | r = req->r; |
| 913 | |
| 914 | if (r->cfg) |
| 915 | ns = r->cfg->nonsecure ? 1 : 0; |
| 916 | else if (readl(regs + CS(thrd->id)) & CS_CNS) |
| 917 | ns = 1; |
| 918 | else |
| 919 | ns = 0; |
| 920 | |
| 921 | /* See 'Abort Sources' point-4 at Page 2-25 */ |
| 922 | if (_manager_ns(thrd) && !ns) |
| 923 | dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", |
| 924 | __func__, __LINE__); |
| 925 | |
| 926 | go.chan = thrd->id; |
| 927 | go.addr = req->mc_bus; |
| 928 | go.ns = ns; |
| 929 | _emit_GO(0, insn, &go); |
| 930 | |
| 931 | /* Set to generate interrupts for SEV */ |
| 932 | writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); |
| 933 | |
| 934 | /* Only manager can execute GO */ |
| 935 | _execute_DBGINSN(thrd, insn, true); |
| 936 | |
| 937 | return true; |
| 938 | } |
| 939 | |
| 940 | static bool _start(struct pl330_thread *thrd) |
| 941 | { |
| 942 | switch (_state(thrd)) { |
| 943 | case PL330_STATE_FAULT_COMPLETING: |
| 944 | UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); |
| 945 | |
| 946 | if (_state(thrd) == PL330_STATE_KILLING) |
| 947 | UNTIL(thrd, PL330_STATE_STOPPED) |
| 948 | |
| 949 | case PL330_STATE_FAULTING: |
| 950 | _stop(thrd); |
| 951 | |
| 952 | case PL330_STATE_KILLING: |
| 953 | case PL330_STATE_COMPLETING: |
| 954 | UNTIL(thrd, PL330_STATE_STOPPED) |
| 955 | |
| 956 | case PL330_STATE_STOPPED: |
| 957 | return _trigger(thrd); |
| 958 | |
| 959 | case PL330_STATE_WFP: |
| 960 | case PL330_STATE_QUEUEBUSY: |
| 961 | case PL330_STATE_ATBARRIER: |
| 962 | case PL330_STATE_UPDTPC: |
| 963 | case PL330_STATE_CACHEMISS: |
| 964 | case PL330_STATE_EXECUTING: |
| 965 | return true; |
| 966 | |
| 967 | case PL330_STATE_WFE: /* For RESUME, nothing yet */ |
| 968 | default: |
| 969 | return false; |
| 970 | } |
| 971 | } |
| 972 | |
| 973 | static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], |
| 974 | const struct _xfer_spec *pxs, int cyc) |
| 975 | { |
| 976 | int off = 0; |
| 977 | |
| 978 | while (cyc--) { |
| 979 | off += _emit_LD(dry_run, &buf[off], ALWAYS); |
| 980 | off += _emit_RMB(dry_run, &buf[off]); |
| 981 | off += _emit_ST(dry_run, &buf[off], ALWAYS); |
| 982 | off += _emit_WMB(dry_run, &buf[off]); |
| 983 | } |
| 984 | |
| 985 | return off; |
| 986 | } |
| 987 | |
| 988 | static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], |
| 989 | const struct _xfer_spec *pxs, int cyc) |
| 990 | { |
| 991 | int off = 0; |
| 992 | |
| 993 | while (cyc--) { |
| 994 | off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); |
| 995 | off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); |
| 996 | off += _emit_ST(dry_run, &buf[off], ALWAYS); |
| 997 | off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); |
| 998 | } |
| 999 | |
| 1000 | return off; |
| 1001 | } |
| 1002 | |
| 1003 | static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], |
| 1004 | const struct _xfer_spec *pxs, int cyc) |
| 1005 | { |
| 1006 | int off = 0; |
| 1007 | |
| 1008 | while (cyc--) { |
| 1009 | off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); |
| 1010 | off += _emit_LD(dry_run, &buf[off], ALWAYS); |
| 1011 | off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); |
| 1012 | off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); |
| 1013 | } |
| 1014 | |
| 1015 | return off; |
| 1016 | } |
| 1017 | |
| 1018 | static int _bursts(unsigned dry_run, u8 buf[], |
| 1019 | const struct _xfer_spec *pxs, int cyc) |
| 1020 | { |
| 1021 | int off = 0; |
| 1022 | |
| 1023 | switch (pxs->r->rqtype) { |
| 1024 | case MEMTODEV: |
| 1025 | off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); |
| 1026 | break; |
| 1027 | case DEVTOMEM: |
| 1028 | off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); |
| 1029 | break; |
| 1030 | case MEMTOMEM: |
| 1031 | off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); |
| 1032 | break; |
| 1033 | default: |
| 1034 | off += 0x40000000; /* Scare off the Client */ |
| 1035 | break; |
| 1036 | } |
| 1037 | |
| 1038 | return off; |
| 1039 | } |
| 1040 | |
| 1041 | /* Returns bytes consumed and updates bursts */ |
| 1042 | static inline int _loop(unsigned dry_run, u8 buf[], |
| 1043 | unsigned long *bursts, const struct _xfer_spec *pxs) |
| 1044 | { |
| 1045 | int cyc, cycmax, szlp, szlpend, szbrst, off; |
| 1046 | unsigned lcnt0, lcnt1, ljmp0, ljmp1; |
| 1047 | struct _arg_LPEND lpend; |
| 1048 | |
| 1049 | /* Max iterations possibile in DMALP is 256 */ |
| 1050 | if (*bursts >= 256*256) { |
| 1051 | lcnt1 = 256; |
| 1052 | lcnt0 = 256; |
| 1053 | cyc = *bursts / lcnt1 / lcnt0; |
| 1054 | } else if (*bursts > 256) { |
| 1055 | lcnt1 = 256; |
| 1056 | lcnt0 = *bursts / lcnt1; |
| 1057 | cyc = 1; |
| 1058 | } else { |
| 1059 | lcnt1 = *bursts; |
| 1060 | lcnt0 = 0; |
| 1061 | cyc = 1; |
| 1062 | } |
| 1063 | |
| 1064 | szlp = _emit_LP(1, buf, 0, 0); |
| 1065 | szbrst = _bursts(1, buf, pxs, 1); |
| 1066 | |
| 1067 | lpend.cond = ALWAYS; |
| 1068 | lpend.forever = false; |
| 1069 | lpend.loop = 0; |
| 1070 | lpend.bjump = 0; |
| 1071 | szlpend = _emit_LPEND(1, buf, &lpend); |
| 1072 | |
| 1073 | if (lcnt0) { |
| 1074 | szlp *= 2; |
| 1075 | szlpend *= 2; |
| 1076 | } |
| 1077 | |
| 1078 | /* |
| 1079 | * Max bursts that we can unroll due to limit on the |
| 1080 | * size of backward jump that can be encoded in DMALPEND |
| 1081 | * which is 8-bits and hence 255 |
| 1082 | */ |
| 1083 | cycmax = (255 - (szlp + szlpend)) / szbrst; |
| 1084 | |
| 1085 | cyc = (cycmax < cyc) ? cycmax : cyc; |
| 1086 | |
| 1087 | off = 0; |
| 1088 | |
| 1089 | if (lcnt0) { |
| 1090 | off += _emit_LP(dry_run, &buf[off], 0, lcnt0); |
| 1091 | ljmp0 = off; |
| 1092 | } |
| 1093 | |
| 1094 | off += _emit_LP(dry_run, &buf[off], 1, lcnt1); |
| 1095 | ljmp1 = off; |
| 1096 | |
| 1097 | off += _bursts(dry_run, &buf[off], pxs, cyc); |
| 1098 | |
| 1099 | lpend.cond = ALWAYS; |
| 1100 | lpend.forever = false; |
| 1101 | lpend.loop = 1; |
| 1102 | lpend.bjump = off - ljmp1; |
| 1103 | off += _emit_LPEND(dry_run, &buf[off], &lpend); |
| 1104 | |
| 1105 | if (lcnt0) { |
| 1106 | lpend.cond = ALWAYS; |
| 1107 | lpend.forever = false; |
| 1108 | lpend.loop = 0; |
| 1109 | lpend.bjump = off - ljmp0; |
| 1110 | off += _emit_LPEND(dry_run, &buf[off], &lpend); |
| 1111 | } |
| 1112 | |
| 1113 | *bursts = lcnt1 * cyc; |
| 1114 | if (lcnt0) |
| 1115 | *bursts *= lcnt0; |
| 1116 | |
| 1117 | return off; |
| 1118 | } |
| 1119 | |
| 1120 | static inline int _setup_loops(unsigned dry_run, u8 buf[], |
| 1121 | const struct _xfer_spec *pxs) |
| 1122 | { |
| 1123 | struct pl330_xfer *x = pxs->x; |
| 1124 | u32 ccr = pxs->ccr; |
| 1125 | unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); |
| 1126 | int off = 0; |
| 1127 | |
| 1128 | while (bursts) { |
| 1129 | c = bursts; |
| 1130 | off += _loop(dry_run, &buf[off], &c, pxs); |
| 1131 | bursts -= c; |
| 1132 | } |
| 1133 | |
| 1134 | return off; |
| 1135 | } |
| 1136 | |
| 1137 | static inline int _setup_xfer(unsigned dry_run, u8 buf[], |
| 1138 | const struct _xfer_spec *pxs) |
| 1139 | { |
| 1140 | struct pl330_xfer *x = pxs->x; |
| 1141 | int off = 0; |
| 1142 | |
| 1143 | /* DMAMOV SAR, x->src_addr */ |
| 1144 | off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); |
| 1145 | /* DMAMOV DAR, x->dst_addr */ |
| 1146 | off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); |
| 1147 | |
| 1148 | /* Setup Loop(s) */ |
| 1149 | off += _setup_loops(dry_run, &buf[off], pxs); |
| 1150 | |
| 1151 | return off; |
| 1152 | } |
| 1153 | |
| 1154 | /* |
| 1155 | * A req is a sequence of one or more xfer units. |
| 1156 | * Returns the number of bytes taken to setup the MC for the req. |
| 1157 | */ |
| 1158 | static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, |
| 1159 | unsigned index, struct _xfer_spec *pxs) |
| 1160 | { |
| 1161 | struct _pl330_req *req = &thrd->req[index]; |
| 1162 | struct pl330_xfer *x; |
| 1163 | u8 *buf = req->mc_cpu; |
| 1164 | int off = 0; |
| 1165 | |
| 1166 | PL330_DBGMC_START(req->mc_bus); |
| 1167 | |
| 1168 | /* DMAMOV CCR, ccr */ |
| 1169 | off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); |
| 1170 | |
| 1171 | x = pxs->r->x; |
| 1172 | do { |
| 1173 | /* Error if xfer length is not aligned at burst size */ |
| 1174 | if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) |
| 1175 | return -EINVAL; |
| 1176 | |
| 1177 | pxs->x = x; |
| 1178 | off += _setup_xfer(dry_run, &buf[off], pxs); |
| 1179 | |
| 1180 | x = x->next; |
| 1181 | } while (x); |
| 1182 | |
| 1183 | /* DMASEV peripheral/event */ |
| 1184 | off += _emit_SEV(dry_run, &buf[off], thrd->ev); |
| 1185 | /* DMAEND */ |
| 1186 | off += _emit_END(dry_run, &buf[off]); |
| 1187 | |
| 1188 | return off; |
| 1189 | } |
| 1190 | |
| 1191 | static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) |
| 1192 | { |
| 1193 | u32 ccr = 0; |
| 1194 | |
| 1195 | if (rqc->src_inc) |
| 1196 | ccr |= CC_SRCINC; |
| 1197 | |
| 1198 | if (rqc->dst_inc) |
| 1199 | ccr |= CC_DSTINC; |
| 1200 | |
| 1201 | /* We set same protection levels for Src and DST for now */ |
| 1202 | if (rqc->privileged) |
| 1203 | ccr |= CC_SRCPRI | CC_DSTPRI; |
| 1204 | if (rqc->nonsecure) |
| 1205 | ccr |= CC_SRCNS | CC_DSTNS; |
| 1206 | if (rqc->insnaccess) |
| 1207 | ccr |= CC_SRCIA | CC_DSTIA; |
| 1208 | |
| 1209 | ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); |
| 1210 | ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); |
| 1211 | |
| 1212 | ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); |
| 1213 | ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); |
| 1214 | |
| 1215 | ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); |
| 1216 | ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); |
| 1217 | |
| 1218 | ccr |= (rqc->swap << CC_SWAP_SHFT); |
| 1219 | |
| 1220 | return ccr; |
| 1221 | } |
| 1222 | |
| 1223 | static inline bool _is_valid(u32 ccr) |
| 1224 | { |
| 1225 | enum pl330_dstcachectrl dcctl; |
| 1226 | enum pl330_srccachectrl scctl; |
| 1227 | |
| 1228 | dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; |
| 1229 | scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; |
| 1230 | |
| 1231 | if (dcctl == DINVALID1 || dcctl == DINVALID2 |
| 1232 | || scctl == SINVALID1 || scctl == SINVALID2) |
| 1233 | return false; |
| 1234 | else |
| 1235 | return true; |
| 1236 | } |
| 1237 | |
| 1238 | /* |
| 1239 | * Submit a list of xfers after which the client wants notification. |
| 1240 | * Client is not notified after each xfer unit, just once after all |
| 1241 | * xfer units are done or some error occurs. |
| 1242 | */ |
| 1243 | int pl330_submit_req(void *ch_id, struct pl330_req *r) |
| 1244 | { |
| 1245 | struct pl330_thread *thrd = ch_id; |
| 1246 | struct pl330_dmac *pl330; |
| 1247 | struct pl330_info *pi; |
| 1248 | struct _xfer_spec xs; |
| 1249 | unsigned long flags; |
| 1250 | void __iomem *regs; |
| 1251 | unsigned idx; |
| 1252 | u32 ccr; |
| 1253 | int ret = 0; |
| 1254 | |
| 1255 | /* No Req or Unacquired Channel or DMAC */ |
| 1256 | if (!r || !thrd || thrd->free) |
| 1257 | return -EINVAL; |
| 1258 | |
| 1259 | pl330 = thrd->dmac; |
| 1260 | pi = pl330->pinfo; |
| 1261 | regs = pi->base; |
| 1262 | |
| 1263 | if (pl330->state == DYING |
| 1264 | || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { |
| 1265 | dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", |
| 1266 | __func__, __LINE__); |
| 1267 | return -EAGAIN; |
| 1268 | } |
| 1269 | |
| 1270 | /* If request for non-existing peripheral */ |
| 1271 | if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { |
| 1272 | dev_info(thrd->dmac->pinfo->dev, |
| 1273 | "%s:%d Invalid peripheral(%u)!\n", |
| 1274 | __func__, __LINE__, r->peri); |
| 1275 | return -EINVAL; |
| 1276 | } |
| 1277 | |
| 1278 | spin_lock_irqsave(&pl330->lock, flags); |
| 1279 | |
| 1280 | if (_queue_full(thrd)) { |
| 1281 | ret = -EAGAIN; |
| 1282 | goto xfer_exit; |
| 1283 | } |
| 1284 | |
| 1285 | /* Prefer Secure Channel */ |
| 1286 | if (!_manager_ns(thrd)) |
| 1287 | r->cfg->nonsecure = 0; |
| 1288 | else |
| 1289 | r->cfg->nonsecure = 1; |
| 1290 | |
| 1291 | /* Use last settings, if not provided */ |
| 1292 | if (r->cfg) |
| 1293 | ccr = _prepare_ccr(r->cfg); |
| 1294 | else |
| 1295 | ccr = readl(regs + CC(thrd->id)); |
| 1296 | |
| 1297 | /* If this req doesn't have valid xfer settings */ |
| 1298 | if (!_is_valid(ccr)) { |
| 1299 | ret = -EINVAL; |
| 1300 | dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", |
| 1301 | __func__, __LINE__, ccr); |
| 1302 | goto xfer_exit; |
| 1303 | } |
| 1304 | |
| 1305 | idx = IS_FREE(&thrd->req[0]) ? 0 : 1; |
| 1306 | |
| 1307 | xs.ccr = ccr; |
| 1308 | xs.r = r; |
| 1309 | |
| 1310 | /* First dry run to check if req is acceptable */ |
| 1311 | ret = _setup_req(1, thrd, idx, &xs); |
| 1312 | if (ret < 0) |
| 1313 | goto xfer_exit; |
| 1314 | |
| 1315 | if (ret > pi->mcbufsz / 2) { |
| 1316 | dev_info(thrd->dmac->pinfo->dev, |
| 1317 | "%s:%d Trying increasing mcbufsz\n", |
| 1318 | __func__, __LINE__); |
| 1319 | ret = -ENOMEM; |
| 1320 | goto xfer_exit; |
| 1321 | } |
| 1322 | |
| 1323 | /* Hook the request */ |
| 1324 | thrd->lstenq = idx; |
| 1325 | thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); |
| 1326 | thrd->req[idx].r = r; |
| 1327 | |
| 1328 | ret = 0; |
| 1329 | |
| 1330 | xfer_exit: |
| 1331 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1332 | |
| 1333 | return ret; |
| 1334 | } |
| 1335 | EXPORT_SYMBOL(pl330_submit_req); |
| 1336 | |
| 1337 | static void pl330_dotask(unsigned long data) |
| 1338 | { |
| 1339 | struct pl330_dmac *pl330 = (struct pl330_dmac *) data; |
| 1340 | struct pl330_info *pi = pl330->pinfo; |
| 1341 | unsigned long flags; |
| 1342 | int i; |
| 1343 | |
| 1344 | spin_lock_irqsave(&pl330->lock, flags); |
| 1345 | |
| 1346 | /* The DMAC itself gone nuts */ |
| 1347 | if (pl330->dmac_tbd.reset_dmac) { |
| 1348 | pl330->state = DYING; |
| 1349 | /* Reset the manager too */ |
| 1350 | pl330->dmac_tbd.reset_mngr = true; |
| 1351 | /* Clear the reset flag */ |
| 1352 | pl330->dmac_tbd.reset_dmac = false; |
| 1353 | } |
| 1354 | |
| 1355 | if (pl330->dmac_tbd.reset_mngr) { |
| 1356 | _stop(pl330->manager); |
| 1357 | /* Reset all channels */ |
| 1358 | pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; |
| 1359 | /* Clear the reset flag */ |
| 1360 | pl330->dmac_tbd.reset_mngr = false; |
| 1361 | } |
| 1362 | |
| 1363 | for (i = 0; i < pi->pcfg.num_chan; i++) { |
| 1364 | |
| 1365 | if (pl330->dmac_tbd.reset_chan & (1 << i)) { |
| 1366 | struct pl330_thread *thrd = &pl330->channels[i]; |
| 1367 | void __iomem *regs = pi->base; |
| 1368 | enum pl330_op_err err; |
| 1369 | |
| 1370 | _stop(thrd); |
| 1371 | |
| 1372 | if (readl(regs + FSC) & (1 << thrd->id)) |
| 1373 | err = PL330_ERR_FAIL; |
| 1374 | else |
| 1375 | err = PL330_ERR_ABORT; |
| 1376 | |
| 1377 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1378 | |
| 1379 | _callback(thrd->req[1 - thrd->lstenq].r, err); |
| 1380 | _callback(thrd->req[thrd->lstenq].r, err); |
| 1381 | |
| 1382 | spin_lock_irqsave(&pl330->lock, flags); |
| 1383 | |
| 1384 | thrd->req[0].r = NULL; |
| 1385 | thrd->req[1].r = NULL; |
| 1386 | MARK_FREE(&thrd->req[0]); |
| 1387 | MARK_FREE(&thrd->req[1]); |
| 1388 | |
| 1389 | /* Clear the reset flag */ |
| 1390 | pl330->dmac_tbd.reset_chan &= ~(1 << i); |
| 1391 | } |
| 1392 | } |
| 1393 | |
| 1394 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1395 | |
| 1396 | return; |
| 1397 | } |
| 1398 | |
| 1399 | /* Returns 1 if state was updated, 0 otherwise */ |
| 1400 | int pl330_update(const struct pl330_info *pi) |
| 1401 | { |
| 1402 | struct _pl330_req *rqdone; |
| 1403 | struct pl330_dmac *pl330; |
| 1404 | unsigned long flags; |
| 1405 | void __iomem *regs; |
| 1406 | u32 val; |
| 1407 | int id, ev, ret = 0; |
| 1408 | |
| 1409 | if (!pi || !pi->pl330_data) |
| 1410 | return 0; |
| 1411 | |
| 1412 | regs = pi->base; |
| 1413 | pl330 = pi->pl330_data; |
| 1414 | |
| 1415 | spin_lock_irqsave(&pl330->lock, flags); |
| 1416 | |
| 1417 | val = readl(regs + FSM) & 0x1; |
| 1418 | if (val) |
| 1419 | pl330->dmac_tbd.reset_mngr = true; |
| 1420 | else |
| 1421 | pl330->dmac_tbd.reset_mngr = false; |
| 1422 | |
| 1423 | val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); |
| 1424 | pl330->dmac_tbd.reset_chan |= val; |
| 1425 | if (val) { |
| 1426 | int i = 0; |
| 1427 | while (i < pi->pcfg.num_chan) { |
| 1428 | if (val & (1 << i)) { |
| 1429 | dev_info(pi->dev, |
| 1430 | "Reset Channel-%d\t CS-%x FTC-%x\n", |
| 1431 | i, readl(regs + CS(i)), |
| 1432 | readl(regs + FTC(i))); |
| 1433 | _stop(&pl330->channels[i]); |
| 1434 | } |
| 1435 | i++; |
| 1436 | } |
| 1437 | } |
| 1438 | |
| 1439 | /* Check which event happened i.e, thread notified */ |
| 1440 | val = readl(regs + ES); |
| 1441 | if (pi->pcfg.num_events < 32 |
| 1442 | && val & ~((1 << pi->pcfg.num_events) - 1)) { |
| 1443 | pl330->dmac_tbd.reset_dmac = true; |
| 1444 | dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); |
| 1445 | ret = 1; |
| 1446 | goto updt_exit; |
| 1447 | } |
| 1448 | |
| 1449 | for (ev = 0; ev < pi->pcfg.num_events; ev++) { |
| 1450 | if (val & (1 << ev)) { /* Event occured */ |
| 1451 | struct pl330_thread *thrd; |
| 1452 | u32 inten = readl(regs + INTEN); |
| 1453 | int active; |
| 1454 | |
| 1455 | /* Clear the event */ |
| 1456 | if (inten & (1 << ev)) |
| 1457 | writel(1 << ev, regs + INTCLR); |
| 1458 | |
| 1459 | ret = 1; |
| 1460 | |
| 1461 | id = pl330->events[ev]; |
| 1462 | |
| 1463 | thrd = &pl330->channels[id]; |
| 1464 | |
| 1465 | active = _thrd_active(thrd); |
| 1466 | if (!active) /* Aborted */ |
| 1467 | continue; |
| 1468 | |
| 1469 | active -= 1; |
| 1470 | |
| 1471 | rqdone = &thrd->req[active]; |
| 1472 | MARK_FREE(rqdone); |
| 1473 | |
| 1474 | /* Get going again ASAP */ |
| 1475 | _start(thrd); |
| 1476 | |
| 1477 | /* For now, just make a list of callbacks to be done */ |
| 1478 | list_add_tail(&rqdone->rqd, &pl330->req_done); |
| 1479 | } |
| 1480 | } |
| 1481 | |
| 1482 | /* Now that we are in no hurry, do the callbacks */ |
| 1483 | while (!list_empty(&pl330->req_done)) { |
| 1484 | rqdone = container_of(pl330->req_done.next, |
| 1485 | struct _pl330_req, rqd); |
| 1486 | |
| 1487 | list_del_init(&rqdone->rqd); |
| 1488 | |
| 1489 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1490 | _callback(rqdone->r, PL330_ERR_NONE); |
| 1491 | spin_lock_irqsave(&pl330->lock, flags); |
| 1492 | } |
| 1493 | |
| 1494 | updt_exit: |
| 1495 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1496 | |
| 1497 | if (pl330->dmac_tbd.reset_dmac |
| 1498 | || pl330->dmac_tbd.reset_mngr |
| 1499 | || pl330->dmac_tbd.reset_chan) { |
| 1500 | ret = 1; |
| 1501 | tasklet_schedule(&pl330->tasks); |
| 1502 | } |
| 1503 | |
| 1504 | return ret; |
| 1505 | } |
| 1506 | EXPORT_SYMBOL(pl330_update); |
| 1507 | |
| 1508 | int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) |
| 1509 | { |
| 1510 | struct pl330_thread *thrd = ch_id; |
| 1511 | struct pl330_dmac *pl330; |
| 1512 | unsigned long flags; |
| 1513 | int ret = 0, active; |
| 1514 | |
| 1515 | if (!thrd || thrd->free || thrd->dmac->state == DYING) |
| 1516 | return -EINVAL; |
| 1517 | |
| 1518 | pl330 = thrd->dmac; |
| 1519 | |
| 1520 | spin_lock_irqsave(&pl330->lock, flags); |
| 1521 | |
| 1522 | switch (op) { |
| 1523 | case PL330_OP_FLUSH: |
| 1524 | /* Make sure the channel is stopped */ |
| 1525 | _stop(thrd); |
| 1526 | |
| 1527 | thrd->req[0].r = NULL; |
| 1528 | thrd->req[1].r = NULL; |
| 1529 | MARK_FREE(&thrd->req[0]); |
| 1530 | MARK_FREE(&thrd->req[1]); |
| 1531 | break; |
| 1532 | |
| 1533 | case PL330_OP_ABORT: |
| 1534 | active = _thrd_active(thrd); |
| 1535 | |
| 1536 | /* Make sure the channel is stopped */ |
| 1537 | _stop(thrd); |
| 1538 | |
| 1539 | /* ABORT is only for the active req */ |
| 1540 | if (!active) |
| 1541 | break; |
| 1542 | |
| 1543 | active--; |
| 1544 | |
| 1545 | thrd->req[active].r = NULL; |
| 1546 | MARK_FREE(&thrd->req[active]); |
| 1547 | |
| 1548 | /* Start the next */ |
| 1549 | case PL330_OP_START: |
| 1550 | if (!_start(thrd)) |
| 1551 | ret = -EIO; |
| 1552 | break; |
| 1553 | |
| 1554 | default: |
| 1555 | ret = -EINVAL; |
| 1556 | } |
| 1557 | |
| 1558 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1559 | return ret; |
| 1560 | } |
| 1561 | EXPORT_SYMBOL(pl330_chan_ctrl); |
| 1562 | |
| 1563 | int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) |
| 1564 | { |
| 1565 | struct pl330_thread *thrd = ch_id; |
| 1566 | struct pl330_dmac *pl330; |
| 1567 | struct pl330_info *pi; |
| 1568 | void __iomem *regs; |
| 1569 | int active; |
| 1570 | u32 val; |
| 1571 | |
| 1572 | if (!pstatus || !thrd || thrd->free) |
| 1573 | return -EINVAL; |
| 1574 | |
| 1575 | pl330 = thrd->dmac; |
| 1576 | pi = pl330->pinfo; |
| 1577 | regs = pi->base; |
| 1578 | |
| 1579 | /* The client should remove the DMAC and add again */ |
| 1580 | if (pl330->state == DYING) |
| 1581 | pstatus->dmac_halted = true; |
| 1582 | else |
| 1583 | pstatus->dmac_halted = false; |
| 1584 | |
| 1585 | val = readl(regs + FSC); |
| 1586 | if (val & (1 << thrd->id)) |
| 1587 | pstatus->faulting = true; |
| 1588 | else |
| 1589 | pstatus->faulting = false; |
| 1590 | |
| 1591 | active = _thrd_active(thrd); |
| 1592 | |
| 1593 | if (!active) { |
| 1594 | /* Indicate that the thread is not running */ |
| 1595 | pstatus->top_req = NULL; |
| 1596 | pstatus->wait_req = NULL; |
| 1597 | } else { |
| 1598 | active--; |
| 1599 | pstatus->top_req = thrd->req[active].r; |
| 1600 | pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) |
| 1601 | ? thrd->req[1 - active].r : NULL; |
| 1602 | } |
| 1603 | |
| 1604 | pstatus->src_addr = readl(regs + SA(thrd->id)); |
| 1605 | pstatus->dst_addr = readl(regs + DA(thrd->id)); |
| 1606 | |
| 1607 | return 0; |
| 1608 | } |
| 1609 | EXPORT_SYMBOL(pl330_chan_status); |
| 1610 | |
| 1611 | /* Reserve an event */ |
| 1612 | static inline int _alloc_event(struct pl330_thread *thrd) |
| 1613 | { |
| 1614 | struct pl330_dmac *pl330 = thrd->dmac; |
| 1615 | struct pl330_info *pi = pl330->pinfo; |
| 1616 | int ev; |
| 1617 | |
| 1618 | for (ev = 0; ev < pi->pcfg.num_events; ev++) |
| 1619 | if (pl330->events[ev] == -1) { |
| 1620 | pl330->events[ev] = thrd->id; |
| 1621 | return ev; |
| 1622 | } |
| 1623 | |
| 1624 | return -1; |
| 1625 | } |
| 1626 | |
| 1627 | /* Upon success, returns IdentityToken for the |
| 1628 | * allocated channel, NULL otherwise. |
| 1629 | */ |
| 1630 | void *pl330_request_channel(const struct pl330_info *pi) |
| 1631 | { |
| 1632 | struct pl330_thread *thrd = NULL; |
| 1633 | struct pl330_dmac *pl330; |
| 1634 | unsigned long flags; |
| 1635 | int chans, i; |
| 1636 | |
| 1637 | if (!pi || !pi->pl330_data) |
| 1638 | return NULL; |
| 1639 | |
| 1640 | pl330 = pi->pl330_data; |
| 1641 | |
| 1642 | if (pl330->state == DYING) |
| 1643 | return NULL; |
| 1644 | |
| 1645 | chans = pi->pcfg.num_chan; |
| 1646 | |
| 1647 | spin_lock_irqsave(&pl330->lock, flags); |
| 1648 | |
| 1649 | for (i = 0; i < chans; i++) { |
| 1650 | thrd = &pl330->channels[i]; |
| 1651 | if (thrd->free) { |
| 1652 | thrd->ev = _alloc_event(thrd); |
| 1653 | if (thrd->ev >= 0) { |
| 1654 | thrd->free = false; |
| 1655 | thrd->lstenq = 1; |
| 1656 | thrd->req[0].r = NULL; |
| 1657 | MARK_FREE(&thrd->req[0]); |
| 1658 | thrd->req[1].r = NULL; |
| 1659 | MARK_FREE(&thrd->req[1]); |
| 1660 | break; |
| 1661 | } |
| 1662 | } |
| 1663 | thrd = NULL; |
| 1664 | } |
| 1665 | |
| 1666 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1667 | |
| 1668 | return thrd; |
| 1669 | } |
| 1670 | EXPORT_SYMBOL(pl330_request_channel); |
| 1671 | |
| 1672 | /* Release an event */ |
| 1673 | static inline void _free_event(struct pl330_thread *thrd, int ev) |
| 1674 | { |
| 1675 | struct pl330_dmac *pl330 = thrd->dmac; |
| 1676 | struct pl330_info *pi = pl330->pinfo; |
| 1677 | |
| 1678 | /* If the event is valid and was held by the thread */ |
| 1679 | if (ev >= 0 && ev < pi->pcfg.num_events |
| 1680 | && pl330->events[ev] == thrd->id) |
| 1681 | pl330->events[ev] = -1; |
| 1682 | } |
| 1683 | |
| 1684 | void pl330_release_channel(void *ch_id) |
| 1685 | { |
| 1686 | struct pl330_thread *thrd = ch_id; |
| 1687 | struct pl330_dmac *pl330; |
| 1688 | unsigned long flags; |
| 1689 | |
| 1690 | if (!thrd || thrd->free) |
| 1691 | return; |
| 1692 | |
| 1693 | _stop(thrd); |
| 1694 | |
| 1695 | _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); |
| 1696 | _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); |
| 1697 | |
| 1698 | pl330 = thrd->dmac; |
| 1699 | |
| 1700 | spin_lock_irqsave(&pl330->lock, flags); |
| 1701 | _free_event(thrd, thrd->ev); |
| 1702 | thrd->free = true; |
| 1703 | spin_unlock_irqrestore(&pl330->lock, flags); |
| 1704 | } |
| 1705 | EXPORT_SYMBOL(pl330_release_channel); |
| 1706 | |
| 1707 | /* Initialize the structure for PL330 configuration, that can be used |
| 1708 | * by the client driver the make best use of the DMAC |
| 1709 | */ |
| 1710 | static void read_dmac_config(struct pl330_info *pi) |
| 1711 | { |
| 1712 | void __iomem *regs = pi->base; |
| 1713 | u32 val; |
| 1714 | |
| 1715 | val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; |
| 1716 | val &= CRD_DATA_WIDTH_MASK; |
| 1717 | pi->pcfg.data_bus_width = 8 * (1 << val); |
| 1718 | |
| 1719 | val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; |
| 1720 | val &= CRD_DATA_BUFF_MASK; |
| 1721 | pi->pcfg.data_buf_dep = val + 1; |
| 1722 | |
| 1723 | val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; |
| 1724 | val &= CR0_NUM_CHANS_MASK; |
| 1725 | val += 1; |
| 1726 | pi->pcfg.num_chan = val; |
| 1727 | |
| 1728 | val = readl(regs + CR0); |
| 1729 | if (val & CR0_PERIPH_REQ_SET) { |
| 1730 | val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; |
| 1731 | val += 1; |
| 1732 | pi->pcfg.num_peri = val; |
| 1733 | pi->pcfg.peri_ns = readl(regs + CR4); |
| 1734 | } else { |
| 1735 | pi->pcfg.num_peri = 0; |
| 1736 | } |
| 1737 | |
| 1738 | val = readl(regs + CR0); |
| 1739 | if (val & CR0_BOOT_MAN_NS) |
| 1740 | pi->pcfg.mode |= DMAC_MODE_NS; |
| 1741 | else |
| 1742 | pi->pcfg.mode &= ~DMAC_MODE_NS; |
| 1743 | |
| 1744 | val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; |
| 1745 | val &= CR0_NUM_EVENTS_MASK; |
| 1746 | val += 1; |
| 1747 | pi->pcfg.num_events = val; |
| 1748 | |
| 1749 | pi->pcfg.irq_ns = readl(regs + CR3); |
| 1750 | |
| 1751 | pi->pcfg.periph_id = get_id(pi, PERIPH_ID); |
| 1752 | pi->pcfg.pcell_id = get_id(pi, PCELL_ID); |
| 1753 | } |
| 1754 | |
| 1755 | static inline void _reset_thread(struct pl330_thread *thrd) |
| 1756 | { |
| 1757 | struct pl330_dmac *pl330 = thrd->dmac; |
| 1758 | struct pl330_info *pi = pl330->pinfo; |
| 1759 | |
| 1760 | thrd->req[0].mc_cpu = pl330->mcode_cpu |
| 1761 | + (thrd->id * pi->mcbufsz); |
| 1762 | thrd->req[0].mc_bus = pl330->mcode_bus |
| 1763 | + (thrd->id * pi->mcbufsz); |
| 1764 | thrd->req[0].r = NULL; |
| 1765 | MARK_FREE(&thrd->req[0]); |
| 1766 | |
| 1767 | thrd->req[1].mc_cpu = thrd->req[0].mc_cpu |
| 1768 | + pi->mcbufsz / 2; |
| 1769 | thrd->req[1].mc_bus = thrd->req[0].mc_bus |
| 1770 | + pi->mcbufsz / 2; |
| 1771 | thrd->req[1].r = NULL; |
| 1772 | MARK_FREE(&thrd->req[1]); |
| 1773 | } |
| 1774 | |
| 1775 | static int dmac_alloc_threads(struct pl330_dmac *pl330) |
| 1776 | { |
| 1777 | struct pl330_info *pi = pl330->pinfo; |
| 1778 | int chans = pi->pcfg.num_chan; |
| 1779 | struct pl330_thread *thrd; |
| 1780 | int i; |
| 1781 | |
| 1782 | /* Allocate 1 Manager and 'chans' Channel threads */ |
| 1783 | pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), |
| 1784 | GFP_KERNEL); |
| 1785 | if (!pl330->channels) |
| 1786 | return -ENOMEM; |
| 1787 | |
| 1788 | /* Init Channel threads */ |
| 1789 | for (i = 0; i < chans; i++) { |
| 1790 | thrd = &pl330->channels[i]; |
| 1791 | thrd->id = i; |
| 1792 | thrd->dmac = pl330; |
| 1793 | _reset_thread(thrd); |
| 1794 | thrd->free = true; |
| 1795 | } |
| 1796 | |
| 1797 | /* MANAGER is indexed at the end */ |
| 1798 | thrd = &pl330->channels[chans]; |
| 1799 | thrd->id = chans; |
| 1800 | thrd->dmac = pl330; |
| 1801 | thrd->free = false; |
| 1802 | pl330->manager = thrd; |
| 1803 | |
| 1804 | return 0; |
| 1805 | } |
| 1806 | |
| 1807 | static int dmac_alloc_resources(struct pl330_dmac *pl330) |
| 1808 | { |
| 1809 | struct pl330_info *pi = pl330->pinfo; |
| 1810 | int chans = pi->pcfg.num_chan; |
| 1811 | int ret; |
| 1812 | |
| 1813 | /* |
| 1814 | * Alloc MicroCode buffer for 'chans' Channel threads. |
| 1815 | * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) |
| 1816 | */ |
| 1817 | pl330->mcode_cpu = dma_alloc_coherent(pi->dev, |
| 1818 | chans * pi->mcbufsz, |
| 1819 | &pl330->mcode_bus, GFP_KERNEL); |
| 1820 | if (!pl330->mcode_cpu) { |
| 1821 | dev_err(pi->dev, "%s:%d Can't allocate memory!\n", |
| 1822 | __func__, __LINE__); |
| 1823 | return -ENOMEM; |
| 1824 | } |
| 1825 | |
| 1826 | ret = dmac_alloc_threads(pl330); |
| 1827 | if (ret) { |
| 1828 | dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", |
| 1829 | __func__, __LINE__); |
| 1830 | dma_free_coherent(pi->dev, |
| 1831 | chans * pi->mcbufsz, |
| 1832 | pl330->mcode_cpu, pl330->mcode_bus); |
| 1833 | return ret; |
| 1834 | } |
| 1835 | |
| 1836 | return 0; |
| 1837 | } |
| 1838 | |
| 1839 | int pl330_add(struct pl330_info *pi) |
| 1840 | { |
| 1841 | struct pl330_dmac *pl330; |
| 1842 | void __iomem *regs; |
| 1843 | int i, ret; |
| 1844 | |
| 1845 | if (!pi || !pi->dev) |
| 1846 | return -EINVAL; |
| 1847 | |
| 1848 | /* If already added */ |
| 1849 | if (pi->pl330_data) |
| 1850 | return -EINVAL; |
| 1851 | |
| 1852 | /* |
| 1853 | * If the SoC can perform reset on the DMAC, then do it |
| 1854 | * before reading its configuration. |
| 1855 | */ |
| 1856 | if (pi->dmac_reset) |
| 1857 | pi->dmac_reset(pi); |
| 1858 | |
| 1859 | regs = pi->base; |
| 1860 | |
| 1861 | /* Check if we can handle this DMAC */ |
| 1862 | if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL |
| 1863 | || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { |
| 1864 | dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", |
| 1865 | readl(regs + PERIPH_ID), readl(regs + PCELL_ID)); |
| 1866 | return -EINVAL; |
| 1867 | } |
| 1868 | |
| 1869 | /* Read the configuration of the DMAC */ |
| 1870 | read_dmac_config(pi); |
| 1871 | |
| 1872 | if (pi->pcfg.num_events == 0) { |
| 1873 | dev_err(pi->dev, "%s:%d Can't work without events!\n", |
| 1874 | __func__, __LINE__); |
| 1875 | return -EINVAL; |
| 1876 | } |
| 1877 | |
| 1878 | pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); |
| 1879 | if (!pl330) { |
| 1880 | dev_err(pi->dev, "%s:%d Can't allocate memory!\n", |
| 1881 | __func__, __LINE__); |
| 1882 | return -ENOMEM; |
| 1883 | } |
| 1884 | |
| 1885 | /* Assign the info structure and private data */ |
| 1886 | pl330->pinfo = pi; |
| 1887 | pi->pl330_data = pl330; |
| 1888 | |
| 1889 | spin_lock_init(&pl330->lock); |
| 1890 | |
| 1891 | INIT_LIST_HEAD(&pl330->req_done); |
| 1892 | |
| 1893 | /* Use default MC buffer size if not provided */ |
| 1894 | if (!pi->mcbufsz) |
| 1895 | pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; |
| 1896 | |
| 1897 | /* Mark all events as free */ |
| 1898 | for (i = 0; i < pi->pcfg.num_events; i++) |
| 1899 | pl330->events[i] = -1; |
| 1900 | |
| 1901 | /* Allocate resources needed by the DMAC */ |
| 1902 | ret = dmac_alloc_resources(pl330); |
| 1903 | if (ret) { |
| 1904 | dev_err(pi->dev, "Unable to create channels for DMAC\n"); |
| 1905 | kfree(pl330); |
| 1906 | return ret; |
| 1907 | } |
| 1908 | |
| 1909 | tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); |
| 1910 | |
| 1911 | pl330->state = INIT; |
| 1912 | |
| 1913 | return 0; |
| 1914 | } |
| 1915 | EXPORT_SYMBOL(pl330_add); |
| 1916 | |
| 1917 | static int dmac_free_threads(struct pl330_dmac *pl330) |
| 1918 | { |
| 1919 | struct pl330_info *pi = pl330->pinfo; |
| 1920 | int chans = pi->pcfg.num_chan; |
| 1921 | struct pl330_thread *thrd; |
| 1922 | int i; |
| 1923 | |
| 1924 | /* Release Channel threads */ |
| 1925 | for (i = 0; i < chans; i++) { |
| 1926 | thrd = &pl330->channels[i]; |
| 1927 | pl330_release_channel((void *)thrd); |
| 1928 | } |
| 1929 | |
| 1930 | /* Free memory */ |
| 1931 | kfree(pl330->channels); |
| 1932 | |
| 1933 | return 0; |
| 1934 | } |
| 1935 | |
| 1936 | static void dmac_free_resources(struct pl330_dmac *pl330) |
| 1937 | { |
| 1938 | struct pl330_info *pi = pl330->pinfo; |
| 1939 | int chans = pi->pcfg.num_chan; |
| 1940 | |
| 1941 | dmac_free_threads(pl330); |
| 1942 | |
| 1943 | dma_free_coherent(pi->dev, chans * pi->mcbufsz, |
| 1944 | pl330->mcode_cpu, pl330->mcode_bus); |
| 1945 | } |
| 1946 | |
| 1947 | void pl330_del(struct pl330_info *pi) |
| 1948 | { |
| 1949 | struct pl330_dmac *pl330; |
| 1950 | |
| 1951 | if (!pi || !pi->pl330_data) |
| 1952 | return; |
| 1953 | |
| 1954 | pl330 = pi->pl330_data; |
| 1955 | |
| 1956 | pl330->state = UNINIT; |
| 1957 | |
| 1958 | tasklet_kill(&pl330->tasks); |
| 1959 | |
| 1960 | /* Free DMAC resources */ |
| 1961 | dmac_free_resources(pl330); |
| 1962 | |
| 1963 | kfree(pl330); |
| 1964 | pi->pl330_data = NULL; |
| 1965 | } |
| 1966 | EXPORT_SYMBOL(pl330_del); |