blob: 14cb2718cb77f1a0d00865ee8ff09e8456ae4fef [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef __SOUND_EMU10K1_H
2#define __SOUND_EMU10K1_H
3
4/*
5 * Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
6 * Creative Labs, Inc.
7 * Definitions for EMU10K1 (SB Live!) chips
8 *
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 *
24 */
25
26#ifdef __KERNEL__
27
28#include <sound/pcm.h>
29#include <sound/rawmidi.h>
30#include <sound/hwdep.h>
31#include <sound/ac97_codec.h>
32#include <sound/util_mem.h>
33#include <sound/pcm-indirect.h>
34#include <sound/timer.h>
35#include <linux/interrupt.h>
36#include <asm/io.h>
37
Linus Torvalds1da177e2005-04-16 15:20:36 -070038/* ------------------- DEFINES -------------------- */
39
40#define EMUPAGESIZE 4096
41#define MAXREQVOICES 8
42#define MAXPAGES 8192
43#define RESERVED 0
44#define NUM_MIDI 16
45#define NUM_G 64 /* use all channels */
46#define NUM_FXSENDS 4
47#define NUM_EFX_PLAYBACK 16
48
49/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
50#define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */
51#define AUDIGY_DMA_MASK 0xffffffffUL /* 32bit */
52
53#define TMEMSIZE 256*1024
54#define TMEMSIZEREG 4
55
56#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
57
58// Audigy specify registers are prefixed with 'A_'
59
60/************************************************************************************************/
61/* PCI function 0 registers, address = <val> + PCIBASE0 */
62/************************************************************************************************/
63
64#define PTR 0x00 /* Indexed register set pointer register */
65 /* NOTE: The CHANNELNUM and ADDRESS words can */
66 /* be modified independently of each other. */
67#define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */
68 /* channel number of the register to be */
69 /* accessed. For non per-channel registers the */
70 /* value should be set to zero. */
71#define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */
72#define A_PTR_ADDRESS_MASK 0x0fff0000
73
74#define DATA 0x04 /* Indexed register set data register */
75
76#define IPR 0x08 /* Global interrupt pending register */
77 /* Clear pending interrupts by writing a 1 to */
78 /* the relevant bits and zero to the other bits */
James Courtier-Dutton6e4abc42005-03-26 19:35:29 +010079#define IPR_P16V 0x80000000 /* Bit set when the CA0151 P16V chip wishes
80 to interrupt */
Linus Torvalds1da177e2005-04-16 15:20:36 -070081#define IPR_GPIOMSG 0x20000000 /* GPIO message interrupt (RE'd, still not sure
82 which INTE bits enable it) */
83
84/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
85#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */
86#define IPR_A_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */
87
88#define IPR_SPDIFBUFFULL 0x04000000 /* SPDIF capture related, 10k2 only? (RE) */
89#define IPR_SPDIFBUFHALFFULL 0x02000000 /* SPDIF capture related? (RE) */
90
91#define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */
92#define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */
93#define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */
94#define IPR_PCIERROR 0x00200000 /* PCI bus error */
95#define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */
96#define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */
97#define IPR_MUTE 0x00040000 /* Mute button pressed */
98#define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */
99#define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */
100#define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */
101#define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */
102#define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */
103#define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */
104#define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */
105#define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */
106#define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */
107#define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */
108#define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */
109#define IPR_CHANNELLOOP 0x00000040 /* Channel (half) loop interrupt(s) pending */
110#define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */
111 /* highest set channel in CLIPL, CLIPH, HLIPL, */
112 /* or HLIPH. When IP is written with CL set, */
113 /* the bit in H/CLIPL or H/CLIPH corresponding */
114 /* to the CIN value written will be cleared. */
115
116#define INTE 0x0c /* Interrupt enable register */
117#define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */
118#define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */
119#define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */
120#define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */
121#define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */
122#define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */
123#define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */
124#define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */
125#define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */
126#define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */
127#define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */
128#define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */
129#define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */
130#define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */
131#define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */
132#define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */
133#define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */
134#define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */
135
136#define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */
137 /* NOTE: There is no reason to use this under */
138 /* Linux, and it will cause odd hardware */
139 /* behavior and possibly random segfaults and */
140 /* lockups if enabled. */
141
142/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
143#define INTE_A_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */
144#define INTE_A_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */
145
146
147#define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */
148 /* NOTE: This bit must always be enabled */
149#define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */
150#define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */
151#define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */
152#define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */
153#define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */
154#define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */
155#define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */
156#define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */
157#define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */
158#define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */
159#define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */
160#define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */
161#define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */
162
163#define WC 0x10 /* Wall Clock register */
164#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */
165#define WC_SAMPLECOUNTER 0x14060010
166#define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */
167 /* NOTE: Each channel takes 1/64th of a sample */
168 /* period to be serviced. */
169
170#define HCFG 0x14 /* Hardware config register */
171 /* NOTE: There is no reason to use the legacy */
172 /* SoundBlaster emulation stuff described below */
173 /* under Linux, and all kinds of weird hardware */
174 /* behavior can result if you try. Don't. */
175#define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */
176#define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */
177#define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */
178#define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */
179#define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */
180#define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */
181#define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */
182#define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */
183#define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */
184#define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */
185#define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */
186#define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */
187 /* NOTE: The rest of the bits in this register */
188 /* _are_ relevant under Linux. */
189#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */
190#define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */
191#define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */
192#define HCFG_GPINPUT0 0x00004000 /* External pin112 */
193#define HCFG_GPINPUT1 0x00002000 /* External pin110 */
194#define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */
195#define HCFG_GPOUT0 0x00001000 /* External pin? (spdif enable on 5.1) */
196#define HCFG_GPOUT1 0x00000800 /* External pin? (IR) */
197#define HCFG_GPOUT2 0x00000400 /* External pin? (IR) */
198#define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */
199#define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */
200 /* 1 = Force all 3 async digital inputs to use */
201 /* the same async sample rate tracker (ZVIDEO) */
202#define HCFG_AC3ENABLE_MASK 0x000000e0 /* AC3 async input control - Not implemented */
203#define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */
204#define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */
205#define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */
206#define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */
207 /* will automatically mute their output when */
208 /* they are not rate-locked to the external */
209 /* async audio source */
210#define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */
211 /* NOTE: This should generally never be used. */
212#define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */
213 /* NOTE: This should generally never be used. */
214#define HCFG_LOCKTANKCACHE 0x01020014
215#define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */
216 /* NOTE: This is a 'cheap' way to implement a */
217 /* master mute function on the mute button, and */
218 /* in general should not be used unless a more */
219 /* sophisticated master mute function has not */
220 /* been written. */
221#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
222 /* Should be set to 1 when the EMU10K1 is */
223 /* completely initialized. */
224
225//For Audigy, MPU port move to 0x70-0x74 ptr register
226
227#define MUDATA 0x18 /* MPU401 data register (8 bits) */
228
229#define MUCMD 0x19 /* MPU401 command register (8 bits) */
230#define MUCMD_RESET 0xff /* RESET command */
231#define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */
232 /* NOTE: All other commands are ignored */
233
234#define MUSTAT MUCMD /* MPU401 status register (8 bits) */
235#define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */
236#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
237
238#define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */
239#define A_GPINPUT_MASK 0xff00
240#define A_GPOUTPUT_MASK 0x00ff
241
242// Audigy output/GPIO stuff taken from the kX drivers
243#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
244#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
245#define A_IOCFG_ENABLE_DIGITAL 0x0004
246#define A_IOCFG_UNKNOWN_20 0x0020
247#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
248#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
249#define A_IOCFG_GPOUT2 0x0001 /* IR */
250#define A_IOCFG_MULTIPURPOSE_JACK 0x2000 /* center+lfe+rear_center (a2/a2ex) */
251 /* + digital for generic 10k2 */
252#define A_IOCFG_DIGITAL_JACK 0x1000 /* digital for a2 platinum */
253#define A_IOCFG_FRONT_JACK 0x4000
254#define A_IOCFG_REAR_JACK 0x8000
255#define A_IOCFG_PHONES_JACK 0x0100 /* LiveDrive */
256
257/* outputs:
258 * for audigy2 platinum: 0xa00
259 * for a2 platinum ex: 0x1c00
260 * for a1 platinum: 0x0
261 */
262
263#define TIMER 0x1a /* Timer terminal count register */
264 /* NOTE: After the rate is changed, a maximum */
265 /* of 1024 sample periods should be allowed */
266 /* before the new rate is guaranteed accurate. */
267#define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */
268 /* 0 == 1024 periods, [1..4] are not useful */
269#define TIMER_RATE 0x0a00001a
270
271#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
272
273#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
274#define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */
275#define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */
276
277/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
278#define PTR2 0x20 /* Indexed register set pointer register */
279#define DATA2 0x24 /* Indexed register set data register */
280#define IPR2 0x28 /* P16V interrupt pending register */
281#define IPR2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
282#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
283#define IPR2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
284#define IPR2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Capture Channel 0 half loop */
285 /* 0x00000100 Playback. Only in once per period.
286 * 0x00110000 Capture. Int on half buffer.
287 */
288#define INTE2 0x2c /* P16V Interrupt enable register. */
289#define INTE2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
290#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
291#define INTE2_PLAYBACK_CH_1_LOOP 0x00002000 /* Playback Channel 1 loop */
292#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop */
293#define INTE2_PLAYBACK_CH_2_LOOP 0x00004000 /* Playback Channel 2 loop */
294#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop */
295#define INTE2_PLAYBACK_CH_3_LOOP 0x00008000 /* Playback Channel 3 loop */
296#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop */
297#define INTE2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
298#define INTE2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Caputre Channel 0 half loop */
299#define HCFG2 0x34 /* Defaults: 0, win2000 sets it to 00004201 */
300 /* 0x00000000 2-channel output. */
301 /* 0x00000200 8-channel output. */
302 /* 0x00000004 pauses stream/irq fail. */
303 /* Rest of bits no nothing to sound output */
304 /* bit 0: Enable P16V audio.
305 * bit 1: Lock P16V record memory cache.
306 * bit 2: Lock P16V playback memory cache.
307 * bit 3: Dummy record insert zero samples.
308 * bit 8: Record 8-channel in phase.
309 * bit 9: Playback 8-channel in phase.
310 * bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute.
311 * bit 13: Playback mixer enable.
312 * bit 14: Route SRC48 mixer output to fx engine.
313 * bit 15: Enable IEEE 1394 chip.
314 */
315#define IPR3 0x38 /* Cdif interrupt pending register */
316#define INTE3 0x3c /* Cdif interrupt enable register. */
317/************************************************************************************************/
318/* PCI function 1 registers, address = <val> + PCIBASE1 */
319/************************************************************************************************/
320
321#define JOYSTICK1 0x00 /* Analog joystick port register */
322#define JOYSTICK2 0x01 /* Analog joystick port register */
323#define JOYSTICK3 0x02 /* Analog joystick port register */
324#define JOYSTICK4 0x03 /* Analog joystick port register */
325#define JOYSTICK5 0x04 /* Analog joystick port register */
326#define JOYSTICK6 0x05 /* Analog joystick port register */
327#define JOYSTICK7 0x06 /* Analog joystick port register */
328#define JOYSTICK8 0x07 /* Analog joystick port register */
329
330/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */
331/* When reading, use these bitfields: */
332#define JOYSTICK_BUTTONS 0x0f /* Joystick button data */
333#define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */
334
335
336/********************************************************************************************************/
337/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */
338/********************************************************************************************************/
339
340#define CPF 0x00 /* Current pitch and fraction register */
341#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */
342#define CPF_CURRENTPITCH 0x10100000
343#define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */
344#define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */
345#define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */
346
347#define PTRX 0x01 /* Pitch target and send A/B amounts register */
348#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */
349#define PTRX_PITCHTARGET 0x10100001
350#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */
351#define PTRX_FXSENDAMOUNT_A 0x08080001
352#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */
353#define PTRX_FXSENDAMOUNT_B 0x08000001
354
355#define CVCF 0x02 /* Current volume and filter cutoff register */
356#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */
357#define CVCF_CURRENTVOL 0x10100002
358#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */
359#define CVCF_CURRENTFILTER 0x10000002
360
361#define VTFT 0x03 /* Volume target and filter cutoff target register */
362#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */
363#define VTFT_VOLUMETARGET 0x10100003
364#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */
365#define VTFT_FILTERTARGET 0x10000003
366
367#define Z1 0x05 /* Filter delay memory 1 register */
368
369#define Z2 0x04 /* Filter delay memory 2 register */
370
371#define PSST 0x06 /* Send C amount and loop start address register */
372#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */
373
374#define PSST_FXSENDAMOUNT_C 0x08180006
375
376#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */
377#define PSST_LOOPSTARTADDR 0x18000006
378
379#define DSL 0x07 /* Send D amount and loop start address register */
380#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */
381
382#define DSL_FXSENDAMOUNT_D 0x08180007
383
384#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */
385#define DSL_LOOPENDADDR 0x18000007
386
387#define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */
388#define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */
389#define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */
390 /* 1 == full band, 7 == lowpass */
391 /* ROM 0 is used when pitch shifting downward or less */
392 /* then 3 semitones upward. Increasingly higher ROM */
393 /* numbers are used, typically in steps of 3 semitones, */
394 /* as upward pitch shifting is performed. */
395#define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */
396#define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */
397#define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */
398#define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */
399#define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */
400#define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */
401#define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */
402#define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */
403#define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */
404#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */
405#define CCCA_CURRADDR 0x18000008
406
407#define CCR 0x09 /* Cache control register */
408#define CCR_CACHEINVALIDSIZE 0x07190009
409#define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */
410#define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */
411#define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */
412#define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */
413#define CCR_READADDRESS 0x06100009
414#define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */
415#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */
416 /* NOTE: This is valid only if CACHELOOPFLAG is set */
417#define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */
418#define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */
419
420#define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
421 /* NOTE: This register is normally not used */
422#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */
423
424#define FXRT 0x0b /* Effects send routing register */
425 /* NOTE: It is illegal to assign the same routing to */
426 /* two effects sends. */
427#define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */
428#define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */
429#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
430#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
431
432#define MAPA 0x0c /* Cache map A */
433
434#define MAPB 0x0d /* Cache map B */
435
436#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
437#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
438
439#define ENVVOL 0x10 /* Volume envelope register */
440#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
441 /* 0x8000-n == 666*n usec delay */
442
443#define ATKHLDV 0x11 /* Volume envelope hold and attack register */
444#define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */
445#define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */
446#define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */
447 /* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */
448
449#define DCYSUSV 0x12 /* Volume envelope sustain and decay register */
450#define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
451#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
452#define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */
453 /* this channel and from writing to pitch, filter and */
454 /* volume targets. */
455#define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */
456 /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
457
458#define LFOVAL1 0x13 /* Modulation LFO value */
459#define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */
460 /* 0x8000-n == 666*n usec delay */
461
462#define ENVVAL 0x14 /* Modulation envelope register */
463#define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */
464 /* 0x8000-n == 666*n usec delay */
465
466#define ATKHLDM 0x15 /* Modulation envelope hold and attack register */
467#define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */
468#define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */
469#define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */
470 /* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */
471
472#define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */
473#define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
474#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
475#define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */
476 /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
477
478#define LFOVAL2 0x17 /* Vibrato LFO register */
479#define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */
480 /* 0x8000-n == 666*n usec delay */
481
482#define IP 0x18 /* Initial pitch register */
483#define IP_MASK 0x0000ffff /* Exponential initial pitch shift */
484 /* 4 bits of octave, 12 bits of fractional octave */
485#define IP_UNITY 0x0000e000 /* Unity pitch shift */
486
487#define IFATN 0x19 /* Initial filter cutoff and attenuation register */
488#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */
489 /* 6 most significant bits are semitones */
490 /* 2 least significant bits are fractions */
491#define IFATN_FILTERCUTOFF 0x08080019
492#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */
493#define IFATN_ATTENUATION 0x08000019
494
495
496#define PEFE 0x1a /* Pitch envelope and filter envelope amount register */
497#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */
498 /* Signed 2's complement, +/- one octave peak extremes */
499#define PEFE_PITCHAMOUNT 0x0808001a
500#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */
501 /* Signed 2's complement, +/- six octaves peak extremes */
502#define PEFE_FILTERAMOUNT 0x0800001a
503#define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */
504#define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */
505 /* Signed 2's complement, +/- one octave extremes */
506#define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */
507 /* Signed 2's complement, +/- three octave extremes */
508
509
510#define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */
511#define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */
512 /* Signed 2's complement, with +/- 12dB extremes */
513
514#define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */
515 /* ??Hz steps, maximum of ?? Hz. */
516#define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */
517#define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */
518 /* Signed 2's complement, +/- one octave extremes */
519#define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */
520 /* 0.039Hz steps, maximum of 9.85 Hz. */
521
522#define TEMPENV 0x1e /* Tempory envelope register */
523#define TEMPENV_MASK 0x0000ffff /* 16-bit value */
524 /* NOTE: All channels contain internal variables; do */
525 /* not write to these locations. */
526
527/* 1f something */
528
529#define CD0 0x20 /* Cache data 0 register */
530#define CD1 0x21 /* Cache data 1 register */
531#define CD2 0x22 /* Cache data 2 register */
532#define CD3 0x23 /* Cache data 3 register */
533#define CD4 0x24 /* Cache data 4 register */
534#define CD5 0x25 /* Cache data 5 register */
535#define CD6 0x26 /* Cache data 6 register */
536#define CD7 0x27 /* Cache data 7 register */
537#define CD8 0x28 /* Cache data 8 register */
538#define CD9 0x29 /* Cache data 9 register */
539#define CDA 0x2a /* Cache data A register */
540#define CDB 0x2b /* Cache data B register */
541#define CDC 0x2c /* Cache data C register */
542#define CDD 0x2d /* Cache data D register */
543#define CDE 0x2e /* Cache data E register */
544#define CDF 0x2f /* Cache data F register */
545
546/* 0x30-3f seem to be the same as 0x20-2f */
547
548#define PTB 0x40 /* Page table base register */
549#define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */
550
551#define TCB 0x41 /* Tank cache base register */
552#define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */
553
554#define ADCCR 0x42 /* ADC sample rate/stereo control register */
555#define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */
556#define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */
557 /* NOTE: To guarantee phase coherency, both channels */
558 /* must be disabled prior to enabling both channels. */
559#define A_ADCCR_RCHANENABLE 0x00000020
560#define A_ADCCR_LCHANENABLE 0x00000010
561
562#define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */
563#define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */
564#define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */
565#define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */
566#define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */
567#define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */
568#define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */
569#define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */
570#define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */
571#define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */
572#define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */
573#define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */
574#define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */
575
576#define FXWC 0x43 /* FX output write channels register */
577 /* When set, each bit enables the writing of the */
578 /* corresponding FX output channel (internal registers */
579 /* 0x20-0x3f) to host memory. This mode of recording */
580 /* is 16bit, 48KHz only. All 32 channels can be enabled */
581 /* simultaneously. */
582
583#define FXWC_DEFAULTROUTE_C (1<<0) /* left emu out? */
584#define FXWC_DEFAULTROUTE_B (1<<1) /* right emu out? */
585#define FXWC_DEFAULTROUTE_A (1<<12)
586#define FXWC_DEFAULTROUTE_D (1<<13)
587#define FXWC_ADCLEFT (1<<18)
588#define FXWC_CDROMSPDIFLEFT (1<<18)
589#define FXWC_ADCRIGHT (1<<19)
590#define FXWC_CDROMSPDIFRIGHT (1<<19)
591#define FXWC_MIC (1<<20)
592#define FXWC_ZOOMLEFT (1<<20)
593#define FXWC_ZOOMRIGHT (1<<21)
594#define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */
595#define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */
596
597#define TCBS 0x44 /* Tank cache buffer size register */
598#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
599#define TCBS_BUFFSIZE_16K 0x00000000
600#define TCBS_BUFFSIZE_32K 0x00000001
601#define TCBS_BUFFSIZE_64K 0x00000002
602#define TCBS_BUFFSIZE_128K 0x00000003
603#define TCBS_BUFFSIZE_256K 0x00000004
604#define TCBS_BUFFSIZE_512K 0x00000005
605#define TCBS_BUFFSIZE_1024K 0x00000006
606#define TCBS_BUFFSIZE_2048K 0x00000007
607
608#define MICBA 0x45 /* AC97 microphone buffer address register */
609#define MICBA_MASK 0xfffff000 /* 20 bit base address */
610
611#define ADCBA 0x46 /* ADC buffer address register */
612#define ADCBA_MASK 0xfffff000 /* 20 bit base address */
613
614#define FXBA 0x47 /* FX Buffer Address */
615#define FXBA_MASK 0xfffff000 /* 20 bit base address */
616
617/* 0x48 something - word access, defaults to 3f */
618
619#define MICBS 0x49 /* Microphone buffer size register */
620
621#define ADCBS 0x4a /* ADC buffer size register */
622
623#define FXBS 0x4b /* FX buffer size register */
624
625/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
626
627/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
628#define ADCBS_BUFSIZE_NONE 0x00000000
629#define ADCBS_BUFSIZE_384 0x00000001
630#define ADCBS_BUFSIZE_448 0x00000002
631#define ADCBS_BUFSIZE_512 0x00000003
632#define ADCBS_BUFSIZE_640 0x00000004
633#define ADCBS_BUFSIZE_768 0x00000005
634#define ADCBS_BUFSIZE_896 0x00000006
635#define ADCBS_BUFSIZE_1024 0x00000007
636#define ADCBS_BUFSIZE_1280 0x00000008
637#define ADCBS_BUFSIZE_1536 0x00000009
638#define ADCBS_BUFSIZE_1792 0x0000000a
639#define ADCBS_BUFSIZE_2048 0x0000000b
640#define ADCBS_BUFSIZE_2560 0x0000000c
641#define ADCBS_BUFSIZE_3072 0x0000000d
642#define ADCBS_BUFSIZE_3584 0x0000000e
643#define ADCBS_BUFSIZE_4096 0x0000000f
644#define ADCBS_BUFSIZE_5120 0x00000010
645#define ADCBS_BUFSIZE_6144 0x00000011
646#define ADCBS_BUFSIZE_7168 0x00000012
647#define ADCBS_BUFSIZE_8192 0x00000013
648#define ADCBS_BUFSIZE_10240 0x00000014
649#define ADCBS_BUFSIZE_12288 0x00000015
650#define ADCBS_BUFSIZE_14366 0x00000016
651#define ADCBS_BUFSIZE_16384 0x00000017
652#define ADCBS_BUFSIZE_20480 0x00000018
653#define ADCBS_BUFSIZE_24576 0x00000019
654#define ADCBS_BUFSIZE_28672 0x0000001a
655#define ADCBS_BUFSIZE_32768 0x0000001b
656#define ADCBS_BUFSIZE_40960 0x0000001c
657#define ADCBS_BUFSIZE_49152 0x0000001d
658#define ADCBS_BUFSIZE_57344 0x0000001e
659#define ADCBS_BUFSIZE_65536 0x0000001f
660
661
662#define CDCS 0x50 /* CD-ROM digital channel status register */
663
664#define GPSCS 0x51 /* General Purpose SPDIF channel status register*/
665
666#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
667
668#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
669
670#define A_DBG 0x53
671#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */
672#define A_DBG_ZC 0x40000000 /* zero tram counter */
673#define A_DBG_STEP_ADDR 0x000003ff
674#define A_DBG_SATURATION_OCCURED 0x20000000
675#define A_DBG_SATURATION_ADDR 0x0ffc0000
676
677// NOTE: 0x54,55,56: 64-bit
678#define SPCS0 0x54 /* SPDIF output Channel Status 0 register */
679
680#define SPCS1 0x55 /* SPDIF output Channel Status 1 register */
681
682#define SPCS2 0x56 /* SPDIF output Channel Status 2 register */
683
684#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */
685#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */
686#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */
687#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */
688#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */
689#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */
690#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */
691#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */
692#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */
693#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */
694#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */
695#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */
696#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */
697#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */
698#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */
699#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */
700#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */
701#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */
702#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */
703#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */
704#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */
705#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
706#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
707
708/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
709#define CLIEL 0x58 /* Channel loop interrupt enable low register */
710
711#define CLIEH 0x59 /* Channel loop interrupt enable high register */
712
713#define CLIPL 0x5a /* Channel loop interrupt pending low register */
714
715#define CLIPH 0x5b /* Channel loop interrupt pending high register */
716
717#define SOLEL 0x5c /* Stop on loop enable low register */
718
719#define SOLEH 0x5d /* Stop on loop enable high register */
720
721#define SPBYPASS 0x5e /* SPDIF BYPASS mode register */
722#define SPBYPASS_SPDIF0_MASK 0x00000003 /* SPDIF 0 bypass mode */
723#define SPBYPASS_SPDIF1_MASK 0x0000000c /* SPDIF 1 bypass mode */
724/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C */
725#define SPBYPASS_FORMAT 0x00000f00 /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit */
726
727#define AC97SLOT 0x5f /* additional AC97 slots enable bits */
728#define AC97SLOT_REAR_RIGHT 0x01 /* Rear left */
729#define AC97SLOT_REAR_LEFT 0x02 /* Rear right */
730#define AC97SLOT_CNTR 0x10 /* Center enable */
731#define AC97SLOT_LFE 0x20 /* LFE enable */
732
733// NOTE: 0x60,61,62: 64-bit
734#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
735
736#define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */
737
738#define ZVSRCS 0x62 /* ZVideo sample rate converter status */
739 /* NOTE: This one has no SPDIFLOCKED field */
740 /* Assumes sample lock */
741
742/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */
James Courtier-Dutton001f7582005-04-09 23:38:25 +0200743#define SRCS_SPDIFVALID 0x04000000 /* SPDIF stream valid */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744#define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */
745#define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */
746#define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */
747
748/* Note that these values can vary +/- by a small amount */
749#define SRCS_SPDIFRATE_44 0x0003acd9
750#define SRCS_SPDIFRATE_48 0x00040000
751#define SRCS_SPDIFRATE_96 0x00080000
752
753#define MICIDX 0x63 /* Microphone recording buffer index register */
754#define MICIDX_MASK 0x0000ffff /* 16-bit value */
755#define MICIDX_IDX 0x10000063
756
757#define ADCIDX 0x64 /* ADC recording buffer index register */
758#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */
759#define ADCIDX_IDX 0x10000064
760
761#define A_ADCIDX 0x63
762#define A_ADCIDX_IDX 0x10000063
763
764#define A_MICIDX 0x64
765#define A_MICIDX_IDX 0x10000064
766
767#define FXIDX 0x65 /* FX recording buffer index register */
768#define FXIDX_MASK 0x0000ffff /* 16-bit value */
769#define FXIDX_IDX 0x10000065
770
771/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status */
772#define HLIEL 0x66 /* Channel half loop interrupt enable low register */
773
774#define HLIEH 0x67 /* Channel half loop interrupt enable high register */
775
776#define HLIPL 0x68 /* Channel half loop interrupt pending low register */
777
778#define HLIPH 0x69 /* Channel half loop interrupt pending high register */
779
780// 0x6a,6b,6c used for some recording
781// 0x6d unused
782// 0x6e,6f - tanktable base / offset
783
784/* This is the MPU port on the card (via the game port) */
785#define A_MUDATA1 0x70
786#define A_MUCMD1 0x71
787#define A_MUSTAT1 A_MUCMD1
788
789/* This is the MPU port on the Audigy Drive */
790#define A_MUDATA2 0x72
791#define A_MUCMD2 0x73
792#define A_MUSTAT2 A_MUCMD2
793
794/* The next two are the Audigy equivalent of FXWC */
795/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */
796/* Each bit selects a channel for recording */
797#define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */
798#define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */
799
800#define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */
James Courtier-Dutton14c7e472005-05-04 16:53:53 +0200801#define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */
802#define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */
803#define A_SAMPLE_RATE_UNKNOWN 0xf0030001 /* Bits that can be set, but have unknown use. */
804#define A_SPDIF_RATE_MASK 0x000000e0 /* Any other values for rates, just use 48000 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805#define A_SPDIF_48000 0x00000000
James Courtier-Dutton14c7e472005-05-04 16:53:53 +0200806#define A_SPDIF_192000 0x00000020
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807#define A_SPDIF_96000 0x00000040
James Courtier-Dutton14c7e472005-05-04 16:53:53 +0200808#define A_SPDIF_44100 0x00000080
809
810#define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */
811#define A_I2S_CAPTURE_48000 0x00000000 /* unclear if this sets the ADC rate as well. */
812#define A_I2S_CAPTURE_192000 0x00000200
813#define A_I2S_CAPTURE_96000 0x00000400
814#define A_I2S_CAPTURE_44100 0x00000800
815
816#define A_PCM_RATE_MASK 0x0000e000 /* This sets the playback PCM rate on the P16V */
817#define A_PCM_48000 0x00000000
818#define A_PCM_192000 0x00002000
819#define A_PCM_96000 0x00004000
820#define A_PCM_44100 0x00008000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700821
822/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */
823/* 0x7a, 0x7b - lookup tables */
824
825#define A_FXRT2 0x7c
826#define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */
827#define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */
828#define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */
829#define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */
830
831#define A_SENDAMOUNTS 0x7d
832#define A_FXSENDAMOUNT_E_MASK 0xFF000000
833#define A_FXSENDAMOUNT_F_MASK 0x00FF0000
834#define A_FXSENDAMOUNT_G_MASK 0x0000FF00
835#define A_FXSENDAMOUNT_H_MASK 0x000000FF
836/* 0x7c, 0x7e "high bit is used for filtering" */
837
838/* The send amounts for this one are the same as used with the emu10k1 */
839#define A_FXRT1 0x7e
840#define A_FXRT_CHANNELA 0x0000003f
841#define A_FXRT_CHANNELB 0x00003f00
842#define A_FXRT_CHANNELC 0x003f0000
843#define A_FXRT_CHANNELD 0x3f000000
844
845
846/* Each FX general purpose register is 32 bits in length, all bits are used */
847#define FXGPREGBASE 0x100 /* FX general purpose registers base */
848#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */
849
850#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */
851#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */
852
853/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */
854/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */
855/* locations are for external TRAM. */
856#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */
857#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */
858
859/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */
860#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */
861#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
862#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
863#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
864#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
865#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
866
867#define MICROCODEBASE 0x400 /* Microcode data base address */
868
869/* Each DSP microcode instruction is mapped into 2 doublewords */
870/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */
871#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */
872#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */
873#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */
874#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */
875#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */
876
877
878/* Audigy Soundcard have a different instruction format */
879#define A_MICROCODEBASE 0x600
880#define A_LOWORD_OPY_MASK 0x000007ff
881#define A_LOWORD_OPX_MASK 0x007ff000
882#define A_HIWORD_OPCODE_MASK 0x0f000000
883#define A_HIWORD_RESULT_MASK 0x007ff000
884#define A_HIWORD_OPA_MASK 0x000007ff
885
886
887/* ------------------- STRUCTURES -------------------- */
888
889typedef struct _snd_emu10k1 emu10k1_t;
890typedef struct _snd_emu10k1_voice emu10k1_voice_t;
891typedef struct _snd_emu10k1_pcm emu10k1_pcm_t;
892
893typedef enum {
894 EMU10K1_EFX,
895 EMU10K1_PCM,
896 EMU10K1_SYNTH,
897 EMU10K1_MIDI
898} emu10k1_voice_type_t;
899
900struct _snd_emu10k1_voice {
901 emu10k1_t *emu;
902 int number;
903 unsigned int use: 1,
904 pcm: 1,
905 efx: 1,
906 synth: 1,
907 midi: 1;
908 void (*interrupt)(emu10k1_t *emu, emu10k1_voice_t *pvoice);
909
910 emu10k1_pcm_t *epcm;
911};
912
913typedef enum {
914 PLAYBACK_EMUVOICE,
915 PLAYBACK_EFX,
916 CAPTURE_AC97ADC,
917 CAPTURE_AC97MIC,
918 CAPTURE_EFX
919} snd_emu10k1_pcm_type_t;
920
921struct _snd_emu10k1_pcm {
922 emu10k1_t *emu;
923 snd_emu10k1_pcm_type_t type;
924 snd_pcm_substream_t *substream;
925 emu10k1_voice_t *voices[NUM_EFX_PLAYBACK];
926 emu10k1_voice_t *extra;
927 unsigned short running;
928 unsigned short first_ptr;
929 snd_util_memblk_t *memblk;
930 unsigned int start_addr;
931 unsigned int ccca_start_addr;
932 unsigned int capture_ipr; /* interrupt acknowledge mask */
933 unsigned int capture_inte; /* interrupt enable mask */
934 unsigned int capture_ba_reg; /* buffer address register */
935 unsigned int capture_bs_reg; /* buffer size register */
936 unsigned int capture_idx_reg; /* buffer index register */
937 unsigned int capture_cr_val; /* control value */
938 unsigned int capture_cr_val2; /* control value2 (for audigy) */
939 unsigned int capture_bs_val; /* buffer size value */
940 unsigned int capture_bufsize; /* buffer size in bytes */
941};
942
943typedef struct {
944 /* mono, left, right x 8 sends (4 on emu10k1) */
945 unsigned char send_routing[3][8];
946 unsigned char send_volume[3][8];
947 unsigned short attn[3];
948 emu10k1_pcm_t *epcm;
949} emu10k1_pcm_mixer_t;
950
951#define snd_emu10k1_compose_send_routing(route) \
952((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
953
954#define snd_emu10k1_compose_audigy_fxrt1(route) \
955((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
956
957#define snd_emu10k1_compose_audigy_fxrt2(route) \
958((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
959
960typedef struct snd_emu10k1_memblk {
961 snd_util_memblk_t mem;
962 /* private part */
963 int first_page, last_page, pages, mapped_page;
964 unsigned int map_locked;
965 struct list_head mapped_link;
966 struct list_head mapped_order_link;
967} emu10k1_memblk_t;
968
969#define snd_emu10k1_memblk_offset(blk) (((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
970
971#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE 16
972
973typedef struct {
974 struct list_head list; /* list link container */
975 unsigned int vcount;
976 unsigned int count; /* count of GPR (1..16) */
977 unsigned short gpr[32]; /* GPR number(s) */
978 unsigned int value[32];
979 unsigned int min; /* minimum range */
980 unsigned int max; /* maximum range */
981 unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
982 snd_kcontrol_t *kcontrol;
983} snd_emu10k1_fx8010_ctl_t;
984
985typedef void (snd_fx8010_irq_handler_t)(emu10k1_t *emu, void *private_data);
986
987typedef struct _snd_emu10k1_fx8010_irq {
988 struct _snd_emu10k1_fx8010_irq *next;
989 snd_fx8010_irq_handler_t *handler;
990 unsigned short gpr_running;
991 void *private_data;
992} snd_emu10k1_fx8010_irq_t;
993
994typedef struct {
995 unsigned int valid: 1,
996 opened: 1,
997 active: 1;
998 unsigned int channels; /* 16-bit channels count */
999 unsigned int tram_start; /* initial ring buffer position in TRAM (in samples) */
1000 unsigned int buffer_size; /* count of buffered samples */
1001 unsigned short gpr_size; /* GPR containing size of ring buffer in samples (host) */
1002 unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
1003 unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
1004 unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
1005 unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
1006 unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
1007 unsigned char etram[32]; /* external TRAM address & data */
1008 snd_pcm_indirect_t pcm_rec;
1009 unsigned int tram_pos;
1010 unsigned int tram_shift;
1011 snd_emu10k1_fx8010_irq_t *irq;
1012} snd_emu10k1_fx8010_pcm_t;
1013
1014typedef struct {
1015 unsigned short fxbus_mask; /* used FX buses (bitmask) */
1016 unsigned short extin_mask; /* used external inputs (bitmask) */
1017 unsigned short extout_mask; /* used external outputs (bitmask) */
1018 unsigned short pad1;
1019 unsigned int itram_size; /* internal TRAM size in samples */
1020 struct snd_dma_buffer etram_pages; /* external TRAM pages and size */
1021 unsigned int dbg; /* FX debugger register */
1022 unsigned char name[128];
1023 int gpr_size; /* size of allocated GPR controls */
1024 int gpr_count; /* count of used kcontrols */
1025 struct list_head gpr_ctl; /* GPR controls */
1026 struct semaphore lock;
1027 snd_emu10k1_fx8010_pcm_t pcm[8];
1028 spinlock_t irq_lock;
1029 snd_emu10k1_fx8010_irq_t *irq_handlers;
1030} snd_emu10k1_fx8010_t;
1031
1032#define emu10k1_gpr_ctl(n) list_entry(n, snd_emu10k1_fx8010_ctl_t, list)
1033
1034typedef struct {
1035 struct _snd_emu10k1 *emu;
1036 snd_rawmidi_t *rmidi;
1037 snd_rawmidi_substream_t *substream_input;
1038 snd_rawmidi_substream_t *substream_output;
1039 unsigned int midi_mode;
1040 spinlock_t input_lock;
1041 spinlock_t output_lock;
1042 spinlock_t open_lock;
1043 int tx_enable, rx_enable;
1044 int port;
1045 int ipr_tx, ipr_rx;
1046 void (*interrupt)(emu10k1_t *emu, unsigned int status);
1047} emu10k1_midi_t;
1048
1049typedef struct {
1050 u32 vendor;
1051 u32 device;
1052 u32 subsystem;
Takashi Iwaibdaed502005-04-07 15:48:42 +02001053 unsigned char revision;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001054 unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */
1055 unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */
1056 unsigned char ca0102_chip; /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
1057 unsigned char ca0108_chip; /* Audigy 2 Value */
1058 unsigned char ca0151_chip; /* P16V */
1059 unsigned char spk71; /* Has 7.1 speakers */
Lee Revell2b637da2005-03-30 13:51:18 +02001060 unsigned char sblive51; /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001061 unsigned char spdif_bug; /* Has Spdif phasing bug */
Takashi Iwaif12aa402005-09-30 16:56:59 +02001062 unsigned char ac97_chip; /* Has an AC97 chip: 1 = mandatory, 2 = optional */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063 unsigned char ecard; /* APS EEPROM */
Takashi Iwaiaec72e02005-03-30 14:22:25 +02001064 const char *driver;
1065 const char *name;
1066 const char *id; /* for backward compatibility - can be NULL if not needed */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067} emu_chip_details_t;
1068
1069struct _snd_emu10k1 {
1070 int irq;
1071
1072 unsigned long port; /* I/O port number */
Lee Revell2b637da2005-03-30 13:51:18 +02001073 unsigned int tos_link: 1, /* tos link detected */
1074 rear_ac97: 1; /* rear channels are on AC'97 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001075 const emu_chip_details_t *card_capabilities; /* Contains profile of card capabilities */
1076 unsigned int audigy; /* is Audigy? */
1077 unsigned int revision; /* chip revision */
1078 unsigned int serial; /* serial number */
1079 unsigned short model; /* subsystem id */
1080 unsigned int card_type; /* EMU10K1_CARD_* */
1081 unsigned int ecard_ctrl; /* ecard control bits */
1082 unsigned long dma_mask; /* PCI DMA mask */
1083 int max_cache_pages; /* max memory size / PAGE_SIZE */
1084 struct snd_dma_buffer silent_page; /* silent page */
1085 struct snd_dma_buffer ptb_pages; /* page table pages */
1086 struct snd_dma_device p16v_dma_dev;
1087 struct snd_dma_buffer p16v_buffer;
1088
1089 snd_util_memhdr_t *memhdr; /* page allocation list */
1090 emu10k1_memblk_t *reserved_page; /* reserved page */
1091
1092 struct list_head mapped_link_head;
1093 struct list_head mapped_order_link_head;
1094 void **page_ptr_table;
1095 unsigned long *page_addr_table;
1096 spinlock_t memblk_lock;
1097
1098 unsigned int spdif_bits[3]; /* s/pdif out setup */
1099
1100 snd_emu10k1_fx8010_t fx8010; /* FX8010 info */
1101 int gpr_base;
1102
1103 ac97_t *ac97;
1104
1105 struct pci_dev *pci;
1106 snd_card_t *card;
1107 snd_pcm_t *pcm;
1108 snd_pcm_t *pcm_mic;
1109 snd_pcm_t *pcm_efx;
1110 snd_pcm_t *pcm_p16v;
1111
1112 spinlock_t synth_lock;
1113 void *synth;
1114 int (*get_synth_voice)(emu10k1_t *emu);
1115
1116 spinlock_t reg_lock;
1117 spinlock_t emu_lock;
1118 spinlock_t voice_lock;
1119 struct semaphore ptb_lock;
1120
1121 emu10k1_voice_t voices[NUM_G];
1122 emu10k1_voice_t p16v_voices[4];
James Courtier-Dutton6e4abc42005-03-26 19:35:29 +01001123 emu10k1_voice_t p16v_capture_voice;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124 int p16v_device_offset;
James Courtier-Dutton6e4abc42005-03-26 19:35:29 +01001125 u32 p16v_capture_source;
James Courtier-Duttonf927c8f2005-05-07 15:34:13 +02001126 u32 p16v_capture_channel;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 emu10k1_pcm_mixer_t pcm_mixer[32];
1128 emu10k1_pcm_mixer_t efx_pcm_mixer[NUM_EFX_PLAYBACK];
1129 snd_kcontrol_t *ctl_send_routing;
1130 snd_kcontrol_t *ctl_send_volume;
1131 snd_kcontrol_t *ctl_attn;
1132 snd_kcontrol_t *ctl_efx_send_routing;
1133 snd_kcontrol_t *ctl_efx_send_volume;
1134 snd_kcontrol_t *ctl_efx_attn;
1135
1136 void (*hwvol_interrupt)(emu10k1_t *emu, unsigned int status);
1137 void (*capture_interrupt)(emu10k1_t *emu, unsigned int status);
1138 void (*capture_mic_interrupt)(emu10k1_t *emu, unsigned int status);
1139 void (*capture_efx_interrupt)(emu10k1_t *emu, unsigned int status);
1140 void (*spdif_interrupt)(emu10k1_t *emu, unsigned int status);
1141 void (*dsp_interrupt)(emu10k1_t *emu);
1142
1143 snd_pcm_substream_t *pcm_capture_substream;
1144 snd_pcm_substream_t *pcm_capture_mic_substream;
1145 snd_pcm_substream_t *pcm_capture_efx_substream;
1146 snd_pcm_substream_t *pcm_playback_efx_substream;
1147
1148 snd_timer_t *timer;
1149
1150 emu10k1_midi_t midi;
1151 emu10k1_midi_t midi2; /* for audigy */
1152
1153 unsigned int efx_voices_mask[2];
1154 unsigned int next_free_voice;
1155};
1156
1157int snd_emu10k1_create(snd_card_t * card,
1158 struct pci_dev *pci,
1159 unsigned short extin_mask,
1160 unsigned short extout_mask,
1161 long max_cache_bytes,
1162 int enable_ir,
James Courtier-Duttone66bc8b2005-07-06 22:21:51 +02001163 uint subsystem,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164 emu10k1_t ** remu);
1165
1166int snd_emu10k1_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
1167int snd_emu10k1_pcm_mic(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
1168int snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
1169int snd_p16v_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
1170int snd_p16v_free(emu10k1_t * emu);
1171int snd_p16v_mixer(emu10k1_t * emu);
1172int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
1173int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
Clemens Ladisch67ed4162005-07-29 15:32:58 +02001174int snd_emu10k1_mixer(emu10k1_t * emu, int pcm_device, int multi_device);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001175int snd_emu10k1_timer(emu10k1_t * emu, int device);
1176int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep);
1177
1178irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id, struct pt_regs *regs);
1179
1180/* initialization */
1181void snd_emu10k1_voice_init(emu10k1_t * emu, int voice);
1182int snd_emu10k1_init_efx(emu10k1_t *emu);
1183void snd_emu10k1_free_efx(emu10k1_t *emu);
1184int snd_emu10k1_fx8010_tram_setup(emu10k1_t *emu, u32 size);
1185
1186/* I/O functions */
1187unsigned int snd_emu10k1_ptr_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
1188void snd_emu10k1_ptr_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
1189unsigned int snd_emu10k1_ptr20_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
1190void snd_emu10k1_ptr20_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
1191unsigned int snd_emu10k1_efx_read(emu10k1_t *emu, unsigned int pc);
1192void snd_emu10k1_intr_enable(emu10k1_t *emu, unsigned int intrenb);
1193void snd_emu10k1_intr_disable(emu10k1_t *emu, unsigned int intrenb);
1194void snd_emu10k1_voice_intr_enable(emu10k1_t *emu, unsigned int voicenum);
1195void snd_emu10k1_voice_intr_disable(emu10k1_t *emu, unsigned int voicenum);
1196void snd_emu10k1_voice_intr_ack(emu10k1_t *emu, unsigned int voicenum);
1197void snd_emu10k1_voice_half_loop_intr_enable(emu10k1_t *emu, unsigned int voicenum);
1198void snd_emu10k1_voice_half_loop_intr_disable(emu10k1_t *emu, unsigned int voicenum);
1199void snd_emu10k1_voice_half_loop_intr_ack(emu10k1_t *emu, unsigned int voicenum);
1200void snd_emu10k1_voice_set_loop_stop(emu10k1_t *emu, unsigned int voicenum);
1201void snd_emu10k1_voice_clear_loop_stop(emu10k1_t *emu, unsigned int voicenum);
1202void snd_emu10k1_wait(emu10k1_t *emu, unsigned int wait);
1203static inline unsigned int snd_emu10k1_wc(emu10k1_t *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; }
1204unsigned short snd_emu10k1_ac97_read(ac97_t *ac97, unsigned short reg);
1205void snd_emu10k1_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short data);
1206unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate);
1207
1208/* memory allocation */
1209snd_util_memblk_t *snd_emu10k1_alloc_pages(emu10k1_t *emu, snd_pcm_substream_t *substream);
1210int snd_emu10k1_free_pages(emu10k1_t *emu, snd_util_memblk_t *blk);
1211snd_util_memblk_t *snd_emu10k1_synth_alloc(emu10k1_t *emu, unsigned int size);
1212int snd_emu10k1_synth_free(emu10k1_t *emu, snd_util_memblk_t *blk);
1213int snd_emu10k1_synth_bzero(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, int size);
1214int snd_emu10k1_synth_copy_from_user(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, const char __user *data, int size);
1215int snd_emu10k1_memblk_map(emu10k1_t *emu, emu10k1_memblk_t *blk);
1216
1217/* voice allocation */
1218int snd_emu10k1_voice_alloc(emu10k1_t *emu, emu10k1_voice_type_t type, int pair, emu10k1_voice_t **rvoice);
1219int snd_emu10k1_voice_free(emu10k1_t *emu, emu10k1_voice_t *pvoice);
1220
1221/* MIDI uart */
1222int snd_emu10k1_midi(emu10k1_t * emu);
1223int snd_emu10k1_audigy_midi(emu10k1_t * emu);
1224
1225/* proc interface */
1226int snd_emu10k1_proc_init(emu10k1_t * emu);
1227
1228/* fx8010 irq handler */
1229int snd_emu10k1_fx8010_register_irq_handler(emu10k1_t *emu,
1230 snd_fx8010_irq_handler_t *handler,
1231 unsigned char gpr_running,
1232 void *private_data,
1233 snd_emu10k1_fx8010_irq_t **r_irq);
1234int snd_emu10k1_fx8010_unregister_irq_handler(emu10k1_t *emu,
1235 snd_emu10k1_fx8010_irq_t *irq);
1236
1237#endif /* __KERNEL__ */
1238
1239/*
1240 * ---- FX8010 ----
1241 */
1242
1243#define EMU10K1_CARD_CREATIVE 0x00000000
1244#define EMU10K1_CARD_EMUAPS 0x00000001
1245
1246#define EMU10K1_FX8010_PCM_COUNT 8
1247
1248/* instruction set */
1249#define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */
1250#define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */
1251#define iMAC2 0x02 /* R = A + (X * Y >> 31) ; wraparound */
1252#define iMAC3 0x03 /* R = A + (-X * Y >> 31) ; wraparound */
1253#define iMACINT0 0x04 /* R = A + X * Y ; saturation */
1254#define iMACINT1 0x05 /* R = A + X * Y ; wraparound (31-bit) */
1255#define iACC3 0x06 /* R = A + X + Y ; saturation */
1256#define iMACMV 0x07 /* R = A, acc += X * Y >> 31 */
1257#define iANDXOR 0x08 /* R = (A & X) ^ Y */
1258#define iTSTNEG 0x09 /* R = (A >= Y) ? X : ~X */
1259#define iLIMITGE 0x0a /* R = (A >= Y) ? X : Y */
1260#define iLIMITLT 0x0b /* R = (A < Y) ? X : Y */
1261#define iLOG 0x0c /* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
1262#define iEXP 0x0d /* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
1263#define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */
1264#define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */
1265
1266/* GPRs */
1267#define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */
1268#define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */
1269#define EXTOUT(x) (0x20 + (x)) /* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
1270#define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
1271 /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
1272
1273#define C_00000000 0x40
1274#define C_00000001 0x41
1275#define C_00000002 0x42
1276#define C_00000003 0x43
1277#define C_00000004 0x44
1278#define C_00000008 0x45
1279#define C_00000010 0x46
1280#define C_00000020 0x47
1281#define C_00000100 0x48
1282#define C_00010000 0x49
1283#define C_00080000 0x4a
1284#define C_10000000 0x4b
1285#define C_20000000 0x4c
1286#define C_40000000 0x4d
1287#define C_80000000 0x4e
1288#define C_7fffffff 0x4f
1289#define C_ffffffff 0x50
1290#define C_fffffffe 0x51
1291#define C_c0000000 0x52
1292#define C_4f1bbcdc 0x53
1293#define C_5a7ef9db 0x54
1294#define C_00100000 0x55 /* ?? */
1295#define GPR_ACCU 0x56 /* ACCUM, accumulator */
1296#define GPR_COND 0x57 /* CCR, condition register */
1297#define GPR_NOISE0 0x58 /* noise source */
1298#define GPR_NOISE1 0x59 /* noise source */
1299#define GPR_IRQ 0x5a /* IRQ register */
1300#define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */
1301#define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
1302#define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
1303#define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
1304#define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
1305#define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
1306
1307#define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
1308#define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
1309#define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
1310#define A_ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
1311#define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
1312#define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
1313
1314#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */
1315#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */
1316#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
1317#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */
1318#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
1319#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
1320#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
1321#define A_GPR(x) (A_FXGPREGBASE + (x))
1322
1323/* cc_reg constants */
1324#define CC_REG_NORMALIZED C_00000001
1325#define CC_REG_BORROW C_00000002
1326#define CC_REG_MINUS C_00000004
1327#define CC_REG_ZERO C_00000008
1328#define CC_REG_SATURATE C_00000010
1329#define CC_REG_NONZERO C_00000100
1330
1331/* FX buses */
1332#define FXBUS_PCM_LEFT 0x00
1333#define FXBUS_PCM_RIGHT 0x01
1334#define FXBUS_PCM_LEFT_REAR 0x02
1335#define FXBUS_PCM_RIGHT_REAR 0x03
1336#define FXBUS_MIDI_LEFT 0x04
1337#define FXBUS_MIDI_RIGHT 0x05
1338#define FXBUS_PCM_CENTER 0x06
1339#define FXBUS_PCM_LFE 0x07
1340#define FXBUS_PCM_LEFT_FRONT 0x08
1341#define FXBUS_PCM_RIGHT_FRONT 0x09
1342#define FXBUS_MIDI_REVERB 0x0c
1343#define FXBUS_MIDI_CHORUS 0x0d
1344#define FXBUS_PCM_LEFT_SIDE 0x0e
1345#define FXBUS_PCM_RIGHT_SIDE 0x0f
1346#define FXBUS_PT_LEFT 0x14
1347#define FXBUS_PT_RIGHT 0x15
1348
1349/* Inputs */
1350#define EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
1351#define EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
1352#define EXTIN_SPDIF_CD_L 0x02 /* internal S/PDIF CD - onboard - left */
1353#define EXTIN_SPDIF_CD_R 0x03 /* internal S/PDIF CD - onboard - right */
1354#define EXTIN_ZOOM_L 0x04 /* Zoom Video I2S - left */
1355#define EXTIN_ZOOM_R 0x05 /* Zoom Video I2S - right */
1356#define EXTIN_TOSLINK_L 0x06 /* LiveDrive - TOSLink Optical - left */
1357#define EXTIN_TOSLINK_R 0x07 /* LiveDrive - TOSLink Optical - right */
1358#define EXTIN_LINE1_L 0x08 /* LiveDrive - Line/Mic 1 - left */
1359#define EXTIN_LINE1_R 0x09 /* LiveDrive - Line/Mic 1 - right */
1360#define EXTIN_COAX_SPDIF_L 0x0a /* LiveDrive - Coaxial S/PDIF - left */
1361#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
1362#define EXTIN_LINE2_L 0x0c /* LiveDrive - Line/Mic 2 - left */
1363#define EXTIN_LINE2_R 0x0d /* LiveDrive - Line/Mic 2 - right */
1364
1365/* Outputs */
1366#define EXTOUT_AC97_L 0x00 /* AC'97 playback channel - left */
1367#define EXTOUT_AC97_R 0x01 /* AC'97 playback channel - right */
1368#define EXTOUT_TOSLINK_L 0x02 /* LiveDrive - TOSLink Optical - left */
1369#define EXTOUT_TOSLINK_R 0x03 /* LiveDrive - TOSLink Optical - right */
1370#define EXTOUT_AC97_CENTER 0x04 /* SB Live 5.1 - center */
1371#define EXTOUT_AC97_LFE 0x05 /* SB Live 5.1 - LFE */
1372#define EXTOUT_HEADPHONE_L 0x06 /* LiveDrive - Headphone - left */
1373#define EXTOUT_HEADPHONE_R 0x07 /* LiveDrive - Headphone - right */
1374#define EXTOUT_REAR_L 0x08 /* Rear channel - left */
1375#define EXTOUT_REAR_R 0x09 /* Rear channel - right */
1376#define EXTOUT_ADC_CAP_L 0x0a /* ADC Capture buffer - left */
1377#define EXTOUT_ADC_CAP_R 0x0b /* ADC Capture buffer - right */
1378#define EXTOUT_MIC_CAP 0x0c /* MIC Capture buffer */
1379#define EXTOUT_AC97_REAR_L 0x0d /* SB Live 5.1 (c) 2003 - Rear Left */
1380#define EXTOUT_AC97_REAR_R 0x0e /* SB Live 5.1 (c) 2003 - Rear Right */
1381#define EXTOUT_ACENTER 0x11 /* Analog Center */
1382#define EXTOUT_ALFE 0x12 /* Analog LFE */
1383
1384/* Audigy Inputs */
1385#define A_EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
1386#define A_EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
1387#define A_EXTIN_SPDIF_CD_L 0x02 /* digital CD left */
1388#define A_EXTIN_SPDIF_CD_R 0x03 /* digital CD left */
1389#define A_EXTIN_OPT_SPDIF_L 0x04 /* audigy drive Optical SPDIF - left */
1390#define A_EXTIN_OPT_SPDIF_R 0x05 /* right */
1391#define A_EXTIN_LINE2_L 0x08 /* audigy drive line2/mic2 - left */
1392#define A_EXTIN_LINE2_R 0x09 /* right */
1393#define A_EXTIN_ADC_L 0x0a /* Philips ADC - left */
1394#define A_EXTIN_ADC_R 0x0b /* right */
1395#define A_EXTIN_AUX2_L 0x0c /* audigy drive aux2 - left */
1396#define A_EXTIN_AUX2_R 0x0d /* - right */
1397
1398/* Audigiy Outputs */
1399#define A_EXTOUT_FRONT_L 0x00 /* digital front left */
1400#define A_EXTOUT_FRONT_R 0x01 /* right */
1401#define A_EXTOUT_CENTER 0x02 /* digital front center */
1402#define A_EXTOUT_LFE 0x03 /* digital front lfe */
1403#define A_EXTOUT_HEADPHONE_L 0x04 /* headphone audigy drive left */
1404#define A_EXTOUT_HEADPHONE_R 0x05 /* right */
1405#define A_EXTOUT_REAR_L 0x06 /* digital rear left */
1406#define A_EXTOUT_REAR_R 0x07 /* right */
1407#define A_EXTOUT_AFRONT_L 0x08 /* analog front left */
1408#define A_EXTOUT_AFRONT_R 0x09 /* right */
1409#define A_EXTOUT_ACENTER 0x0a /* analog center */
1410#define A_EXTOUT_ALFE 0x0b /* analog LFE */
1411#define A_EXTOUT_ASIDE_L 0x0c /* analog side left - Audigy 2 ZS */
1412#define A_EXTOUT_ASIDE_R 0x0d /* right - Audigy 2 ZS */
1413#define A_EXTOUT_AREAR_L 0x0e /* analog rear left */
1414#define A_EXTOUT_AREAR_R 0x0f /* right */
1415#define A_EXTOUT_AC97_L 0x10 /* AC97 left (front) */
1416#define A_EXTOUT_AC97_R 0x11 /* right */
1417#define A_EXTOUT_ADC_CAP_L 0x16 /* ADC capture buffer left */
1418#define A_EXTOUT_ADC_CAP_R 0x17 /* right */
1419#define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */
1420
1421/* Audigy constants */
1422#define A_C_00000000 0xc0
1423#define A_C_00000001 0xc1
1424#define A_C_00000002 0xc2
1425#define A_C_00000003 0xc3
1426#define A_C_00000004 0xc4
1427#define A_C_00000008 0xc5
1428#define A_C_00000010 0xc6
1429#define A_C_00000020 0xc7
1430#define A_C_00000100 0xc8
1431#define A_C_00010000 0xc9
1432#define A_C_00000800 0xca
1433#define A_C_10000000 0xcb
1434#define A_C_20000000 0xcc
1435#define A_C_40000000 0xcd
1436#define A_C_80000000 0xce
1437#define A_C_7fffffff 0xcf
1438#define A_C_ffffffff 0xd0
1439#define A_C_fffffffe 0xd1
1440#define A_C_c0000000 0xd2
1441#define A_C_4f1bbcdc 0xd3
1442#define A_C_5a7ef9db 0xd4
1443#define A_C_00100000 0xd5
1444#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */
1445#define A_GPR_COND 0xd7 /* CCR, condition register */
1446#define A_GPR_NOISE0 0xd8 /* noise source */
1447#define A_GPR_NOISE1 0xd9 /* noise source */
1448#define A_GPR_IRQ 0xda /* IRQ register */
1449#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */
1450#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */
1451
1452/* definitions for debug register */
1453#define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */
1454#define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */
1455#define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */
1456#define EMU10K1_DBG_SINGLE_STEP 0x00008000 /* single step mode */
1457#define EMU10K1_DBG_STEP 0x00004000 /* start single step */
1458#define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */
1459#define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */
1460
1461/* tank memory address line */
1462#ifndef __KERNEL__
1463#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
1464#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
1465#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
1466#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
1467#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
1468#endif
1469
1470typedef struct {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001471 unsigned int internal_tram_size; /* in samples */
1472 unsigned int external_tram_size; /* in samples */
1473 char fxbus_names[16][32]; /* names of FXBUSes */
1474 char extin_names[16][32]; /* names of external inputs */
1475 char extout_names[32][32]; /* names of external outputs */
1476 unsigned int gpr_controls; /* count of GPR controls */
1477} emu10k1_fx8010_info_t;
1478
1479#define EMU10K1_GPR_TRANSLATION_NONE 0
1480#define EMU10K1_GPR_TRANSLATION_TABLE100 1
1481#define EMU10K1_GPR_TRANSLATION_BASS 2
1482#define EMU10K1_GPR_TRANSLATION_TREBLE 3
1483#define EMU10K1_GPR_TRANSLATION_ONOFF 4
1484
1485typedef struct {
1486 snd_ctl_elem_id_t id; /* full control ID definition */
1487 unsigned int vcount; /* visible count */
1488 unsigned int count; /* count of GPR (1..16) */
1489 unsigned short gpr[32]; /* GPR number(s) */
1490 unsigned int value[32]; /* initial values */
1491 unsigned int min; /* minimum range */
1492 unsigned int max; /* maximum range */
1493 unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
1494} emu10k1_fx8010_control_gpr_t;
1495
1496typedef struct {
1497 char name[128];
1498
1499 DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */
1500 u_int32_t __user *gpr_map; /* initializers */
1501
1502 unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */
1503 emu10k1_fx8010_control_gpr_t __user *gpr_add_controls; /* GPR controls to add/replace */
1504
1505 unsigned int gpr_del_control_count; /* count of GPR controls to remove */
1506 snd_ctl_elem_id_t __user *gpr_del_controls; /* IDs of GPR controls to remove */
1507
1508 unsigned int gpr_list_control_count; /* count of GPR controls to list */
1509 unsigned int gpr_list_control_total; /* total count of GPR controls */
1510 emu10k1_fx8010_control_gpr_t __user *gpr_list_controls; /* listed GPR controls */
1511
1512 DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */
1513 u_int32_t __user *tram_data_map; /* data initializers */
1514 u_int32_t __user *tram_addr_map; /* map initializers */
1515
1516 DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */
1517 u_int32_t __user *code; /* one instruction - 64 bits */
1518} emu10k1_fx8010_code_t;
1519
1520typedef struct {
1521 unsigned int address; /* 31.bit == 1 -> external TRAM */
1522 unsigned int size; /* size in samples (4 bytes) */
1523 unsigned int *samples; /* pointer to samples (20-bit) */
1524 /* NULL->clear memory */
1525} emu10k1_fx8010_tram_t;
1526
1527typedef struct {
1528 unsigned int substream; /* substream number */
1529 unsigned int res1; /* reserved */
1530 unsigned int channels; /* 16-bit channels count, zero = remove this substream */
1531 unsigned int tram_start; /* ring buffer position in TRAM (in samples) */
1532 unsigned int buffer_size; /* count of buffered samples */
1533 unsigned short gpr_size; /* GPR containing size of ringbuffer in samples (host) */
1534 unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
1535 unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
1536 unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
1537 unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
1538 unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
1539 unsigned char pad; /* reserved */
1540 unsigned char etram[32]; /* external TRAM address & data (one per channel) */
1541 unsigned int res2; /* reserved */
1542} emu10k1_fx8010_pcm_t;
1543
1544#define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, emu10k1_fx8010_info_t)
1545#define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, emu10k1_fx8010_code_t)
1546#define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, emu10k1_fx8010_code_t)
1547#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP _IOW ('H', 0x20, int)
1548#define SNDRV_EMU10K1_IOCTL_TRAM_POKE _IOW ('H', 0x21, emu10k1_fx8010_tram_t)
1549#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, emu10k1_fx8010_tram_t)
1550#define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, emu10k1_fx8010_pcm_t)
1551#define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, emu10k1_fx8010_pcm_t)
1552#define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80)
1553#define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81)
1554#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
1555#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP _IOW ('H', 0x83, int)
1556#define SNDRV_EMU10K1_IOCTL_DBG_READ _IOR ('H', 0x84, int)
1557
1558#endif /* __SOUND_EMU10K1_H */