Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * driver for the SAA7146 based AV110 cards (like the Fujitsu-Siemens DVB) |
| 3 | * av7110.c: initialization and demux stuff |
| 4 | * |
| 5 | * Copyright (C) 1999-2002 Ralph Metzler |
| 6 | * & Marcus Metzler for convergence integrated media GmbH |
| 7 | * |
| 8 | * originally based on code by: |
| 9 | * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de> |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or |
| 12 | * modify it under the terms of the GNU General Public License |
| 13 | * as published by the Free Software Foundation; either version 2 |
| 14 | * of the License, or (at your option) any later version. |
| 15 | * |
| 16 | * |
| 17 | * This program is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | * GNU General Public License for more details. |
| 21 | * |
| 22 | * |
| 23 | * You should have received a copy of the GNU General Public License |
| 24 | * along with this program; if not, write to the Free Software |
| 25 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 26 | * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| 27 | * |
| 28 | * |
| 29 | * the project's page is at http://www.linuxtv.org/dvb/ |
| 30 | */ |
| 31 | |
| 32 | |
| 33 | #include <linux/config.h> |
| 34 | #include <linux/module.h> |
| 35 | #include <linux/kmod.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <linux/fs.h> |
| 38 | #include <linux/timer.h> |
| 39 | #include <linux/poll.h> |
| 40 | #include <linux/byteorder/swabb.h> |
| 41 | #include <linux/smp_lock.h> |
| 42 | |
| 43 | #include <linux/kernel.h> |
| 44 | #include <linux/moduleparam.h> |
| 45 | #include <linux/sched.h> |
| 46 | #include <linux/types.h> |
| 47 | #include <linux/fcntl.h> |
| 48 | #include <linux/interrupt.h> |
| 49 | #include <linux/string.h> |
| 50 | #include <linux/pci.h> |
| 51 | #include <linux/vmalloc.h> |
| 52 | #include <linux/firmware.h> |
| 53 | #include <linux/crc32.h> |
| 54 | #include <linux/i2c.h> |
| 55 | |
| 56 | #include <asm/system.h> |
| 57 | #include <asm/semaphore.h> |
| 58 | |
| 59 | #include <linux/dvb/frontend.h> |
| 60 | |
| 61 | #include "dvb_frontend.h" |
| 62 | |
| 63 | #include "ttpci-eeprom.h" |
| 64 | #include "av7110.h" |
| 65 | #include "av7110_hw.h" |
| 66 | #include "av7110_av.h" |
| 67 | #include "av7110_ca.h" |
| 68 | #include "av7110_ipack.h" |
| 69 | |
| 70 | #define TS_WIDTH 376 |
| 71 | #define TS_HEIGHT 512 |
| 72 | #define TS_BUFLEN (TS_WIDTH*TS_HEIGHT) |
| 73 | #define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE) |
| 74 | |
| 75 | |
| 76 | int av7110_debug; |
| 77 | |
| 78 | static int vidmode = CVBS_RGB_OUT; |
| 79 | static int pids_off; |
| 80 | static int adac = DVB_ADAC_TI; |
| 81 | static int hw_sections; |
| 82 | static int rgb_on; |
| 83 | static int volume = 255; |
| 84 | static int budgetpatch = 0; |
| 85 | |
| 86 | module_param_named(debug, av7110_debug, int, 0644); |
| 87 | MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)"); |
| 88 | module_param(vidmode, int, 0444); |
| 89 | MODULE_PARM_DESC(vidmode,"analog video out: 0 off, 1 CVBS+RGB (default), 2 CVBS+YC, 3 YC"); |
| 90 | module_param(pids_off, int, 0444); |
| 91 | MODULE_PARM_DESC(pids_off,"clear video/audio/PCR PID filters when demux is closed"); |
| 92 | module_param(adac, int, 0444); |
| 93 | MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetection fails)"); |
| 94 | module_param(hw_sections, int, 0444); |
| 95 | MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware"); |
| 96 | module_param(rgb_on, int, 0444); |
| 97 | MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control" |
| 98 | " signal on SCART pin 16 to switch SCART video mode from CVBS to RGB"); |
| 99 | module_param(volume, int, 0444); |
| 100 | MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)"); |
| 101 | module_param(budgetpatch, int, 0444); |
| 102 | MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)"); |
| 103 | |
| 104 | static void restart_feeds(struct av7110 *av7110); |
| 105 | |
| 106 | static int av7110_num = 0; |
| 107 | |
| 108 | #define FE_FUNC_OVERRIDE(fe_func, av7110_copy, av7110_func) \ |
| 109 | {\ |
| 110 | if (fe_func != NULL) { \ |
| 111 | av7110_copy = fe_func; \ |
| 112 | fe_func = av7110_func; \ |
| 113 | } \ |
| 114 | } |
| 115 | |
| 116 | |
| 117 | static void init_av7110_av(struct av7110 *av7110) |
| 118 | { |
| 119 | struct saa7146_dev *dev = av7110->dev; |
| 120 | |
| 121 | /* set internal volume control to maximum */ |
| 122 | av7110->adac_type = DVB_ADAC_TI; |
| 123 | av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); |
| 124 | |
| 125 | av7710_set_video_mode(av7110, vidmode); |
| 126 | |
| 127 | /* handle different card types */ |
| 128 | /* remaining inits according to card and frontend type */ |
| 129 | av7110->analog_tuner_flags = 0; |
| 130 | av7110->current_input = 0; |
| 131 | if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) { |
| 132 | printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n", |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 133 | av7110->dvb_adapter.num); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 134 | av7110->adac_type = DVB_ADAC_CRYSTAL; |
| 135 | i2c_writereg(av7110, 0x20, 0x01, 0xd2); |
| 136 | i2c_writereg(av7110, 0x20, 0x02, 0x49); |
| 137 | i2c_writereg(av7110, 0x20, 0x03, 0x00); |
| 138 | i2c_writereg(av7110, 0x20, 0x04, 0x00); |
| 139 | |
| 140 | /** |
| 141 | * some special handling for the Siemens DVB-C cards... |
| 142 | */ |
| 143 | } else if (0 == av7110_init_analog_module(av7110)) { |
| 144 | /* done. */ |
| 145 | } |
| 146 | else if (dev->pci->subsystem_vendor == 0x110a) { |
| 147 | printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n", |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 148 | av7110->dvb_adapter.num); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 149 | av7110->adac_type = DVB_ADAC_NONE; |
| 150 | } |
| 151 | else { |
| 152 | av7110->adac_type = adac; |
| 153 | printk("dvb-ttpci: adac type set to %d @ card %d\n", |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 154 | av7110->dvb_adapter.num, av7110->adac_type); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 155 | } |
| 156 | |
| 157 | if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP) { |
| 158 | // switch DVB SCART on |
| 159 | av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0); |
| 160 | av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1); |
| 161 | if (rgb_on && |
| 162 | (av7110->dev->pci->subsystem_vendor == 0x110a) && (av7110->dev->pci->subsystem_device == 0x0000)) { |
| 163 | saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // RGB on, SCART pin 16 |
| 164 | //saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // SCARTpin 8 |
| 165 | } |
| 166 | } |
| 167 | |
| 168 | av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); |
| 169 | av7110_setup_irc_config(av7110, 0); |
| 170 | } |
| 171 | |
| 172 | static void recover_arm(struct av7110 *av7110) |
| 173 | { |
| 174 | dprintk(4, "%p\n",av7110); |
| 175 | |
| 176 | av7110_bootarm(av7110); |
| 177 | msleep(100); |
| 178 | restart_feeds(av7110); |
| 179 | av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, av7110->ir_config); |
| 180 | } |
| 181 | |
| 182 | static void arm_error(struct av7110 *av7110) |
| 183 | { |
| 184 | dprintk(4, "%p\n",av7110); |
| 185 | |
| 186 | av7110->arm_errors++; |
| 187 | av7110->arm_ready = 0; |
| 188 | recover_arm(av7110); |
| 189 | } |
| 190 | |
| 191 | static void av7110_arm_sync(struct av7110 *av7110) |
| 192 | { |
| 193 | av7110->arm_rmmod = 1; |
| 194 | wake_up_interruptible(&av7110->arm_wait); |
| 195 | |
| 196 | while (av7110->arm_thread) |
| 197 | msleep(1); |
| 198 | } |
| 199 | |
| 200 | static int arm_thread(void *data) |
| 201 | { |
| 202 | struct av7110 *av7110 = data; |
| 203 | u16 newloops = 0; |
| 204 | int timeout; |
| 205 | |
| 206 | dprintk(4, "%p\n",av7110); |
| 207 | |
| 208 | lock_kernel(); |
| 209 | daemonize("arm_mon"); |
| 210 | sigfillset(¤t->blocked); |
| 211 | unlock_kernel(); |
| 212 | |
| 213 | av7110->arm_thread = current; |
| 214 | |
| 215 | for (;;) { |
| 216 | timeout = wait_event_interruptible_timeout(av7110->arm_wait, |
| 217 | av7110->arm_rmmod, 5 * HZ); |
| 218 | if (-ERESTARTSYS == timeout || av7110->arm_rmmod) { |
| 219 | /* got signal or told to quit*/ |
| 220 | break; |
| 221 | } |
| 222 | |
| 223 | if (!av7110->arm_ready) |
| 224 | continue; |
| 225 | |
| 226 | if (down_interruptible(&av7110->dcomlock)) |
| 227 | break; |
| 228 | |
| 229 | newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2); |
| 230 | up(&av7110->dcomlock); |
| 231 | |
| 232 | if (newloops == av7110->arm_loops) { |
| 233 | printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n", |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 234 | av7110->dvb_adapter.num); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 235 | |
| 236 | arm_error(av7110); |
| 237 | av7710_set_video_mode(av7110, vidmode); |
| 238 | |
| 239 | init_av7110_av(av7110); |
| 240 | |
| 241 | if (down_interruptible(&av7110->dcomlock)) |
| 242 | break; |
| 243 | |
| 244 | newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2) - 1; |
| 245 | up(&av7110->dcomlock); |
| 246 | } |
| 247 | av7110->arm_loops = newloops; |
| 248 | } |
| 249 | |
| 250 | av7110->arm_thread = NULL; |
| 251 | return 0; |
| 252 | } |
| 253 | |
| 254 | |
| 255 | /** |
| 256 | * Hack! we save the last av7110 ptr. This should be ok, since |
| 257 | * you rarely will use more then one IR control. |
| 258 | * |
| 259 | * If we want to support multiple controls we would have to do much more... |
| 260 | */ |
| 261 | void av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config) |
| 262 | { |
| 263 | static struct av7110 *last; |
| 264 | |
| 265 | dprintk(4, "%p\n", av7110); |
| 266 | |
| 267 | if (!av7110) |
| 268 | av7110 = last; |
| 269 | else |
| 270 | last = av7110; |
| 271 | |
| 272 | if (av7110) { |
| 273 | av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config); |
| 274 | av7110->ir_config = ir_config; |
| 275 | } |
| 276 | } |
| 277 | |
| 278 | static void (*irc_handler)(u32); |
| 279 | |
| 280 | void av7110_register_irc_handler(void (*func)(u32)) |
| 281 | { |
| 282 | dprintk(4, "registering %p\n", func); |
| 283 | irc_handler = func; |
| 284 | } |
| 285 | |
| 286 | void av7110_unregister_irc_handler(void (*func)(u32)) |
| 287 | { |
| 288 | dprintk(4, "unregistering %p\n", func); |
| 289 | irc_handler = NULL; |
| 290 | } |
| 291 | |
| 292 | static void run_handlers(unsigned long ircom) |
| 293 | { |
| 294 | if (irc_handler != NULL) |
| 295 | (*irc_handler)((u32) ircom); |
| 296 | } |
| 297 | |
| 298 | static DECLARE_TASKLET(irtask, run_handlers, 0); |
| 299 | |
| 300 | static void IR_handle(struct av7110 *av7110, u32 ircom) |
| 301 | { |
| 302 | dprintk(4, "ircommand = %08x\n", ircom); |
| 303 | irtask.data = (unsigned long) ircom; |
| 304 | tasklet_schedule(&irtask); |
| 305 | } |
| 306 | |
| 307 | /**************************************************************************** |
| 308 | * IRQ handling |
| 309 | ****************************************************************************/ |
| 310 | |
| 311 | static int DvbDmxFilterCallback(u8 *buffer1, size_t buffer1_len, |
| 312 | u8 *buffer2, size_t buffer2_len, |
| 313 | struct dvb_demux_filter *dvbdmxfilter, |
| 314 | enum dmx_success success, |
| 315 | struct av7110 *av7110) |
| 316 | { |
| 317 | if (!dvbdmxfilter->feed->demux->dmx.frontend) |
| 318 | return 0; |
| 319 | if (dvbdmxfilter->feed->demux->dmx.frontend->source == DMX_MEMORY_FE) |
| 320 | return 0; |
| 321 | |
| 322 | switch (dvbdmxfilter->type) { |
| 323 | case DMX_TYPE_SEC: |
| 324 | if ((((buffer1[1] << 8) | buffer1[2]) & 0xfff) + 3 != buffer1_len) |
| 325 | return 0; |
| 326 | if (dvbdmxfilter->doneq) { |
| 327 | struct dmx_section_filter *filter = &dvbdmxfilter->filter; |
| 328 | int i; |
| 329 | u8 xor, neq = 0; |
| 330 | |
| 331 | for (i = 0; i < DVB_DEMUX_MASK_MAX; i++) { |
| 332 | xor = filter->filter_value[i] ^ buffer1[i]; |
| 333 | neq |= dvbdmxfilter->maskandnotmode[i] & xor; |
| 334 | } |
| 335 | if (!neq) |
| 336 | return 0; |
| 337 | } |
| 338 | return dvbdmxfilter->feed->cb.sec(buffer1, buffer1_len, |
| 339 | buffer2, buffer2_len, |
| 340 | &dvbdmxfilter->filter, |
| 341 | DMX_OK); |
| 342 | case DMX_TYPE_TS: |
| 343 | if (!(dvbdmxfilter->feed->ts_type & TS_PACKET)) |
| 344 | return 0; |
| 345 | if (dvbdmxfilter->feed->ts_type & TS_PAYLOAD_ONLY) |
| 346 | return dvbdmxfilter->feed->cb.ts(buffer1, buffer1_len, |
| 347 | buffer2, buffer2_len, |
| 348 | &dvbdmxfilter->feed->feed.ts, |
| 349 | DMX_OK); |
| 350 | else |
| 351 | av7110_p2t_write(buffer1, buffer1_len, |
| 352 | dvbdmxfilter->feed->pid, |
| 353 | &av7110->p2t_filter[dvbdmxfilter->index]); |
| 354 | default: |
| 355 | return 0; |
| 356 | } |
| 357 | } |
| 358 | |
| 359 | |
| 360 | //#define DEBUG_TIMING |
| 361 | static inline void print_time(char *s) |
| 362 | { |
| 363 | #ifdef DEBUG_TIMING |
| 364 | struct timeval tv; |
| 365 | do_gettimeofday(&tv); |
| 366 | printk("%s: %d.%d\n", s, (int)tv.tv_sec, (int)tv.tv_usec); |
| 367 | #endif |
| 368 | } |
| 369 | |
| 370 | #define DEBI_READ 0 |
| 371 | #define DEBI_WRITE 1 |
| 372 | static inline void start_debi_dma(struct av7110 *av7110, int dir, |
| 373 | unsigned long addr, unsigned int len) |
| 374 | { |
| 375 | dprintk(8, "%c %08lx %u\n", dir == DEBI_READ ? 'R' : 'W', addr, len); |
| 376 | if (saa7146_wait_for_debi_done(av7110->dev, 0)) { |
| 377 | printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __FUNCTION__); |
| 378 | return; |
| 379 | } |
| 380 | |
| 381 | SAA7146_ISR_CLEAR(av7110->dev, MASK_19); /* for good measure */ |
| 382 | SAA7146_IER_ENABLE(av7110->dev, MASK_19); |
| 383 | if (len < 5) |
| 384 | len = 5; /* we want a real DEBI DMA */ |
| 385 | if (dir == DEBI_WRITE) |
| 386 | iwdebi(av7110, DEBISWAB, addr, 0, (len + 3) & ~3); |
| 387 | else |
| 388 | irdebi(av7110, DEBISWAB, addr, 0, len); |
| 389 | } |
| 390 | |
| 391 | static void debiirq(unsigned long data) |
| 392 | { |
| 393 | struct av7110 *av7110 = (struct av7110 *) data; |
| 394 | int type = av7110->debitype; |
| 395 | int handle = (type >> 8) & 0x1f; |
| 396 | unsigned int xfer = 0; |
| 397 | |
| 398 | print_time("debi"); |
| 399 | dprintk(4, "type 0x%04x\n", type); |
| 400 | |
| 401 | if (type == -1) { |
| 402 | printk("DEBI irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", |
| 403 | jiffies, saa7146_read(av7110->dev, PSR), |
| 404 | saa7146_read(av7110->dev, SSR)); |
| 405 | goto debi_done; |
| 406 | } |
| 407 | av7110->debitype = -1; |
| 408 | |
| 409 | switch (type & 0xff) { |
| 410 | |
| 411 | case DATA_TS_RECORD: |
| 412 | dvb_dmx_swfilter_packets(&av7110->demux, |
| 413 | (const u8 *) av7110->debi_virt, |
| 414 | av7110->debilen / 188); |
| 415 | xfer = RX_BUFF; |
| 416 | break; |
| 417 | |
| 418 | case DATA_PES_RECORD: |
| 419 | if (av7110->demux.recording) |
| 420 | av7110_record_cb(&av7110->p2t[handle], |
| 421 | (u8 *) av7110->debi_virt, |
| 422 | av7110->debilen); |
| 423 | xfer = RX_BUFF; |
| 424 | break; |
| 425 | |
| 426 | case DATA_IPMPE: |
| 427 | case DATA_FSECTION: |
| 428 | case DATA_PIPING: |
| 429 | if (av7110->handle2filter[handle]) |
| 430 | DvbDmxFilterCallback((u8 *)av7110->debi_virt, |
| 431 | av7110->debilen, NULL, 0, |
| 432 | av7110->handle2filter[handle], |
| 433 | DMX_OK, av7110); |
| 434 | xfer = RX_BUFF; |
| 435 | break; |
| 436 | |
| 437 | case DATA_CI_GET: |
| 438 | { |
| 439 | u8 *data = av7110->debi_virt; |
| 440 | |
| 441 | if ((data[0] < 2) && data[2] == 0xff) { |
| 442 | int flags = 0; |
| 443 | if (data[5] > 0) |
| 444 | flags |= CA_CI_MODULE_PRESENT; |
| 445 | if (data[5] > 5) |
| 446 | flags |= CA_CI_MODULE_READY; |
| 447 | av7110->ci_slot[data[0]].flags = flags; |
| 448 | } else |
| 449 | ci_get_data(&av7110->ci_rbuffer, |
| 450 | av7110->debi_virt, |
| 451 | av7110->debilen); |
| 452 | xfer = RX_BUFF; |
| 453 | break; |
| 454 | } |
| 455 | |
| 456 | case DATA_COMMON_INTERFACE: |
| 457 | CI_handle(av7110, (u8 *)av7110->debi_virt, av7110->debilen); |
| 458 | #if 0 |
| 459 | { |
| 460 | int i; |
| 461 | |
| 462 | printk("av7110%d: ", av7110->num); |
| 463 | printk("%02x ", *(u8 *)av7110->debi_virt); |
| 464 | printk("%02x ", *(1+(u8 *)av7110->debi_virt)); |
| 465 | for (i = 2; i < av7110->debilen; i++) |
| 466 | printk("%02x ", (*(i+(unsigned char *)av7110->debi_virt))); |
| 467 | for (i = 2; i < av7110->debilen; i++) |
| 468 | printk("%c", chtrans(*(i+(unsigned char *)av7110->debi_virt))); |
| 469 | |
| 470 | printk("\n"); |
| 471 | } |
| 472 | #endif |
| 473 | xfer = RX_BUFF; |
| 474 | break; |
| 475 | |
| 476 | case DATA_DEBUG_MESSAGE: |
| 477 | ((s8*)av7110->debi_virt)[Reserved_SIZE - 1] = 0; |
| 478 | printk("%s\n", (s8 *) av7110->debi_virt); |
| 479 | xfer = RX_BUFF; |
| 480 | break; |
| 481 | |
| 482 | case DATA_CI_PUT: |
| 483 | dprintk(4, "debi DATA_CI_PUT\n"); |
| 484 | case DATA_MPEG_PLAY: |
| 485 | dprintk(4, "debi DATA_MPEG_PLAY\n"); |
| 486 | case DATA_BMP_LOAD: |
| 487 | dprintk(4, "debi DATA_BMP_LOAD\n"); |
| 488 | xfer = TX_BUFF; |
| 489 | break; |
| 490 | default: |
| 491 | break; |
| 492 | } |
| 493 | debi_done: |
| 494 | spin_lock(&av7110->debilock); |
| 495 | if (xfer) |
| 496 | iwdebi(av7110, DEBINOSWAP, xfer, 0, 2); |
| 497 | ARM_ClearMailBox(av7110); |
| 498 | spin_unlock(&av7110->debilock); |
| 499 | } |
| 500 | |
| 501 | /* irq from av7110 firmware writing the mailbox register in the DPRAM */ |
| 502 | static void gpioirq(unsigned long data) |
| 503 | { |
| 504 | struct av7110 *av7110 = (struct av7110 *) data; |
| 505 | u32 rxbuf, txbuf; |
| 506 | int len; |
| 507 | |
| 508 | if (av7110->debitype != -1) |
| 509 | /* we shouldn't get any irq while a debi xfer is running */ |
| 510 | printk("dvb-ttpci: GPIO0 irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", |
| 511 | jiffies, saa7146_read(av7110->dev, PSR), |
| 512 | saa7146_read(av7110->dev, SSR)); |
| 513 | |
| 514 | if (saa7146_wait_for_debi_done(av7110->dev, 0)) { |
| 515 | printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __FUNCTION__); |
| 516 | BUG(); /* maybe we should try resetting the debi? */ |
| 517 | } |
| 518 | |
| 519 | spin_lock(&av7110->debilock); |
| 520 | ARM_ClearIrq(av7110); |
| 521 | |
| 522 | /* see what the av7110 wants */ |
| 523 | av7110->debitype = irdebi(av7110, DEBINOSWAP, IRQ_STATE, 0, 2); |
| 524 | av7110->debilen = irdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 525 | rxbuf = irdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); |
| 526 | txbuf = irdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 527 | len = (av7110->debilen + 3) & ~3; |
| 528 | |
| 529 | print_time("gpio"); |
| 530 | dprintk(8, "GPIO0 irq 0x%04x %d\n", av7110->debitype, av7110->debilen); |
| 531 | |
| 532 | switch (av7110->debitype & 0xff) { |
| 533 | |
| 534 | case DATA_TS_PLAY: |
| 535 | case DATA_PES_PLAY: |
| 536 | break; |
| 537 | |
| 538 | case DATA_MPEG_VIDEO_EVENT: |
| 539 | { |
| 540 | u32 h_ar; |
| 541 | struct video_event event; |
| 542 | |
| 543 | av7110->video_size.w = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_WIDTH, 0, 2); |
| 544 | h_ar = irdebi(av7110, DEBINOSWAP, STATUS_MPEG_HEIGHT_AR, 0, 2); |
| 545 | |
| 546 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 547 | iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); |
| 548 | |
| 549 | av7110->video_size.h = h_ar & 0xfff; |
| 550 | dprintk(8, "GPIO0 irq: DATA_MPEG_VIDEO_EVENT: w/h/ar = %u/%u/%u\n", |
| 551 | av7110->video_size.w, |
| 552 | av7110->video_size.h, |
| 553 | av7110->video_size.aspect_ratio); |
| 554 | |
| 555 | event.type = VIDEO_EVENT_SIZE_CHANGED; |
| 556 | event.u.size.w = av7110->video_size.w; |
| 557 | event.u.size.h = av7110->video_size.h; |
| 558 | switch ((h_ar >> 12) & 0xf) |
| 559 | { |
| 560 | case 3: |
| 561 | av7110->video_size.aspect_ratio = VIDEO_FORMAT_16_9; |
| 562 | event.u.size.aspect_ratio = VIDEO_FORMAT_16_9; |
| 563 | av7110->videostate.video_format = VIDEO_FORMAT_16_9; |
| 564 | break; |
| 565 | case 4: |
| 566 | av7110->video_size.aspect_ratio = VIDEO_FORMAT_221_1; |
| 567 | event.u.size.aspect_ratio = VIDEO_FORMAT_221_1; |
| 568 | av7110->videostate.video_format = VIDEO_FORMAT_221_1; |
| 569 | break; |
| 570 | default: |
| 571 | av7110->video_size.aspect_ratio = VIDEO_FORMAT_4_3; |
| 572 | event.u.size.aspect_ratio = VIDEO_FORMAT_4_3; |
| 573 | av7110->videostate.video_format = VIDEO_FORMAT_4_3; |
| 574 | } |
| 575 | dvb_video_add_event(av7110, &event); |
| 576 | break; |
| 577 | } |
| 578 | |
| 579 | case DATA_CI_PUT: |
| 580 | { |
| 581 | int avail; |
| 582 | struct dvb_ringbuffer *cibuf = &av7110->ci_wbuffer; |
| 583 | |
| 584 | avail = dvb_ringbuffer_avail(cibuf); |
| 585 | if (avail <= 2) { |
| 586 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 587 | iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); |
| 588 | iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 589 | break; |
| 590 | } |
| 591 | len = DVB_RINGBUFFER_PEEK(cibuf, 0) << 8; |
| 592 | len |= DVB_RINGBUFFER_PEEK(cibuf, 1); |
| 593 | if (avail < len + 2) { |
| 594 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 595 | iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); |
| 596 | iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 597 | break; |
| 598 | } |
| 599 | DVB_RINGBUFFER_SKIP(cibuf, 2); |
| 600 | |
| 601 | dvb_ringbuffer_read(cibuf, av7110->debi_virt, len, 0); |
| 602 | |
| 603 | iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); |
| 604 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); |
| 605 | dprintk(8, "DMA: CI\n"); |
| 606 | start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len); |
| 607 | spin_unlock(&av7110->debilock); |
| 608 | wake_up(&cibuf->queue); |
| 609 | return; |
| 610 | } |
| 611 | |
| 612 | case DATA_MPEG_PLAY: |
| 613 | if (!av7110->playing) { |
| 614 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 615 | iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); |
| 616 | iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 617 | break; |
| 618 | } |
| 619 | len = 0; |
| 620 | if (av7110->debitype & 0x100) { |
| 621 | spin_lock(&av7110->aout.lock); |
| 622 | len = av7110_pes_play(av7110->debi_virt, &av7110->aout, 2048); |
| 623 | spin_unlock(&av7110->aout.lock); |
| 624 | } |
| 625 | if (len <= 0 && (av7110->debitype & 0x200) |
| 626 | &&av7110->videostate.play_state != VIDEO_FREEZED) { |
| 627 | spin_lock(&av7110->avout.lock); |
| 628 | len = av7110_pes_play(av7110->debi_virt, &av7110->avout, 2048); |
| 629 | spin_unlock(&av7110->avout.lock); |
| 630 | } |
| 631 | if (len <= 0) { |
| 632 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 633 | iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); |
| 634 | iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 635 | break; |
| 636 | } |
| 637 | dprintk(8, "GPIO0 PES_PLAY len=%04x\n", len); |
| 638 | iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); |
| 639 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); |
| 640 | dprintk(8, "DMA: MPEG_PLAY\n"); |
| 641 | start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE + txbuf, len); |
| 642 | spin_unlock(&av7110->debilock); |
| 643 | return; |
| 644 | |
| 645 | case DATA_BMP_LOAD: |
| 646 | len = av7110->debilen; |
| 647 | dprintk(8, "gpio DATA_BMP_LOAD len %d\n", len); |
| 648 | if (!len) { |
| 649 | av7110->bmp_state = BMP_LOADED; |
| 650 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, 0, 2); |
| 651 | iwdebi(av7110, DEBINOSWAP, TX_LEN, 0, 2); |
| 652 | iwdebi(av7110, DEBINOSWAP, TX_BUFF, 0, 2); |
| 653 | wake_up(&av7110->bmpq); |
| 654 | dprintk(8, "gpio DATA_BMP_LOAD done\n"); |
| 655 | break; |
| 656 | } |
| 657 | if (len > av7110->bmplen) |
| 658 | len = av7110->bmplen; |
| 659 | if (len > 2 * 1024) |
| 660 | len = 2 * 1024; |
| 661 | iwdebi(av7110, DEBINOSWAP, TX_LEN, len, 2); |
| 662 | iwdebi(av7110, DEBINOSWAP, IRQ_STATE_EXT, len, 2); |
| 663 | memcpy(av7110->debi_virt, av7110->bmpbuf+av7110->bmpp, len); |
| 664 | av7110->bmpp += len; |
| 665 | av7110->bmplen -= len; |
| 666 | dprintk(8, "gpio DATA_BMP_LOAD DMA len %d\n", len); |
| 667 | start_debi_dma(av7110, DEBI_WRITE, DPRAM_BASE+txbuf, len); |
| 668 | spin_unlock(&av7110->debilock); |
| 669 | return; |
| 670 | |
| 671 | case DATA_CI_GET: |
| 672 | case DATA_COMMON_INTERFACE: |
| 673 | case DATA_FSECTION: |
| 674 | case DATA_IPMPE: |
| 675 | case DATA_PIPING: |
| 676 | if (!len || len > 4 * 1024) { |
| 677 | iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); |
| 678 | break; |
| 679 | } |
| 680 | /* fall through */ |
| 681 | |
| 682 | case DATA_TS_RECORD: |
| 683 | case DATA_PES_RECORD: |
| 684 | dprintk(8, "DMA: TS_REC etc.\n"); |
| 685 | start_debi_dma(av7110, DEBI_READ, DPRAM_BASE+rxbuf, len); |
| 686 | spin_unlock(&av7110->debilock); |
| 687 | return; |
| 688 | |
| 689 | case DATA_DEBUG_MESSAGE: |
| 690 | if (!len || len > 0xff) { |
| 691 | iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); |
| 692 | break; |
| 693 | } |
| 694 | start_debi_dma(av7110, DEBI_READ, Reserved, len); |
| 695 | spin_unlock(&av7110->debilock); |
| 696 | return; |
| 697 | |
| 698 | case DATA_IRCOMMAND: |
| 699 | IR_handle(av7110, |
| 700 | swahw32(irdebi(av7110, DEBINOSWAP, Reserved, 0, 4))); |
| 701 | iwdebi(av7110, DEBINOSWAP, RX_BUFF, 0, 2); |
| 702 | break; |
| 703 | |
| 704 | default: |
| 705 | printk("dvb-ttpci: gpioirq unknown type=%d len=%d\n", |
| 706 | av7110->debitype, av7110->debilen); |
| 707 | break; |
| 708 | } |
| 709 | av7110->debitype = -1; |
| 710 | ARM_ClearMailBox(av7110); |
| 711 | spin_unlock(&av7110->debilock); |
| 712 | } |
| 713 | |
| 714 | |
| 715 | #ifdef CONFIG_DVB_AV7110_OSD |
| 716 | static int dvb_osd_ioctl(struct inode *inode, struct file *file, |
| 717 | unsigned int cmd, void *parg) |
| 718 | { |
| 719 | struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; |
| 720 | struct av7110 *av7110 = (struct av7110 *) dvbdev->priv; |
| 721 | |
| 722 | dprintk(4, "%p\n", av7110); |
| 723 | |
| 724 | if (cmd == OSD_SEND_CMD) |
| 725 | return av7110_osd_cmd(av7110, (osd_cmd_t *) parg); |
| 726 | if (cmd == OSD_GET_CAPABILITY) |
| 727 | return av7110_osd_capability(av7110, (osd_cap_t *) parg); |
| 728 | |
| 729 | return -EINVAL; |
| 730 | } |
| 731 | |
| 732 | |
| 733 | static struct file_operations dvb_osd_fops = { |
| 734 | .owner = THIS_MODULE, |
| 735 | .ioctl = dvb_generic_ioctl, |
| 736 | .open = dvb_generic_open, |
| 737 | .release = dvb_generic_release, |
| 738 | }; |
| 739 | |
| 740 | static struct dvb_device dvbdev_osd = { |
| 741 | .priv = NULL, |
| 742 | .users = 1, |
| 743 | .writers = 1, |
| 744 | .fops = &dvb_osd_fops, |
| 745 | .kernel_ioctl = dvb_osd_ioctl, |
| 746 | }; |
| 747 | #endif /* CONFIG_DVB_AV7110_OSD */ |
| 748 | |
| 749 | |
| 750 | static inline int SetPIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, |
| 751 | u16 subpid, u16 pcrpid) |
| 752 | { |
| 753 | dprintk(4, "%p\n", av7110); |
| 754 | |
| 755 | if (vpid == 0x1fff || apid == 0x1fff || |
| 756 | ttpid == 0x1fff || subpid == 0x1fff || pcrpid == 0x1fff) { |
| 757 | vpid = apid = ttpid = subpid = pcrpid = 0; |
| 758 | av7110->pids[DMX_PES_VIDEO] = 0; |
| 759 | av7110->pids[DMX_PES_AUDIO] = 0; |
| 760 | av7110->pids[DMX_PES_TELETEXT] = 0; |
| 761 | av7110->pids[DMX_PES_PCR] = 0; |
| 762 | } |
| 763 | |
| 764 | return av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, MultiPID, 5, |
| 765 | pcrpid, vpid, apid, ttpid, subpid); |
| 766 | } |
| 767 | |
| 768 | void ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, |
| 769 | u16 subpid, u16 pcrpid) |
| 770 | { |
| 771 | dprintk(4, "%p\n", av7110); |
| 772 | |
| 773 | if (down_interruptible(&av7110->pid_mutex)) |
| 774 | return; |
| 775 | |
| 776 | if (!(vpid & 0x8000)) |
| 777 | av7110->pids[DMX_PES_VIDEO] = vpid; |
| 778 | if (!(apid & 0x8000)) |
| 779 | av7110->pids[DMX_PES_AUDIO] = apid; |
| 780 | if (!(ttpid & 0x8000)) |
| 781 | av7110->pids[DMX_PES_TELETEXT] = ttpid; |
| 782 | if (!(pcrpid & 0x8000)) |
| 783 | av7110->pids[DMX_PES_PCR] = pcrpid; |
| 784 | |
| 785 | av7110->pids[DMX_PES_SUBTITLE] = 0; |
| 786 | |
| 787 | if (av7110->fe_synced) { |
| 788 | pcrpid = av7110->pids[DMX_PES_PCR]; |
| 789 | SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid); |
| 790 | } |
| 791 | |
| 792 | up(&av7110->pid_mutex); |
| 793 | } |
| 794 | |
| 795 | |
| 796 | /****************************************************************************** |
| 797 | * hardware filter functions |
| 798 | ******************************************************************************/ |
| 799 | |
| 800 | static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) |
| 801 | { |
| 802 | struct dvb_demux_feed *dvbdmxfeed = dvbdmxfilter->feed; |
| 803 | struct av7110 *av7110 = (struct av7110 *) dvbdmxfeed->demux->priv; |
| 804 | u16 buf[20]; |
| 805 | int ret, i; |
| 806 | u16 handle; |
| 807 | // u16 mode = 0x0320; |
| 808 | u16 mode = 0xb96a; |
| 809 | |
| 810 | dprintk(4, "%p\n", av7110); |
| 811 | |
| 812 | if (dvbdmxfilter->type == DMX_TYPE_SEC) { |
| 813 | if (hw_sections) { |
| 814 | buf[4] = (dvbdmxfilter->filter.filter_value[0] << 8) | |
| 815 | dvbdmxfilter->maskandmode[0]; |
| 816 | for (i = 3; i < 18; i++) |
| 817 | buf[i + 4 - 2] = |
| 818 | (dvbdmxfilter->filter.filter_value[i] << 8) | |
| 819 | dvbdmxfilter->maskandmode[i]; |
| 820 | mode = 4; |
| 821 | } |
| 822 | } else if ((dvbdmxfeed->ts_type & TS_PACKET) && |
| 823 | !(dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY)) { |
| 824 | av7110_p2t_init(&av7110->p2t_filter[dvbdmxfilter->index], dvbdmxfeed); |
| 825 | } |
| 826 | |
| 827 | buf[0] = (COMTYPE_PID_FILTER << 8) + AddPIDFilter; |
| 828 | buf[1] = 16; |
| 829 | buf[2] = dvbdmxfeed->pid; |
| 830 | buf[3] = mode; |
| 831 | |
| 832 | ret = av7110_fw_request(av7110, buf, 20, &handle, 1); |
| 833 | if (ret != 0 || handle >= 32) { |
| 834 | printk("dvb-ttpci: %s error buf %04x %04x %04x %04x " |
| 835 | "ret %x handle %04x\n", |
| 836 | __FUNCTION__, buf[0], buf[1], buf[2], buf[3], |
| 837 | ret, handle); |
| 838 | dvbdmxfilter->hw_handle = 0xffff; |
| 839 | return -1; |
| 840 | } |
| 841 | |
| 842 | av7110->handle2filter[handle] = dvbdmxfilter; |
| 843 | dvbdmxfilter->hw_handle = handle; |
| 844 | |
| 845 | return ret; |
| 846 | } |
| 847 | |
| 848 | static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) |
| 849 | { |
| 850 | struct av7110 *av7110 = (struct av7110 *) dvbdmxfilter->feed->demux->priv; |
| 851 | u16 buf[3]; |
| 852 | u16 answ[2]; |
| 853 | int ret; |
| 854 | u16 handle; |
| 855 | |
| 856 | dprintk(4, "%p\n", av7110); |
| 857 | |
| 858 | handle = dvbdmxfilter->hw_handle; |
| 859 | if (handle >= 32) { |
| 860 | printk("%s tried to stop invalid filter %04x, filter type = %x\n", |
| 861 | __FUNCTION__, handle, dvbdmxfilter->type); |
| 862 | return 0; |
| 863 | } |
| 864 | |
| 865 | av7110->handle2filter[handle] = NULL; |
| 866 | |
| 867 | buf[0] = (COMTYPE_PID_FILTER << 8) + DelPIDFilter; |
| 868 | buf[1] = 1; |
| 869 | buf[2] = handle; |
| 870 | ret = av7110_fw_request(av7110, buf, 3, answ, 2); |
| 871 | if (ret != 0 || answ[1] != handle) { |
| 872 | printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x " |
| 873 | "resp %04x %04x pid %d\n", |
| 874 | __FUNCTION__, buf[0], buf[1], buf[2], ret, |
| 875 | answ[0], answ[1], dvbdmxfilter->feed->pid); |
| 876 | ret = -1; |
| 877 | } |
| 878 | return ret; |
| 879 | } |
| 880 | |
| 881 | |
| 882 | static void dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) |
| 883 | { |
| 884 | struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| 885 | struct av7110 *av7110 = (struct av7110 *) dvbdmx->priv; |
| 886 | u16 *pid = dvbdmx->pids, npids[5]; |
| 887 | int i; |
| 888 | |
| 889 | dprintk(4, "%p\n", av7110); |
| 890 | |
| 891 | npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff; |
| 892 | i = dvbdmxfeed->pes_type; |
| 893 | npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; |
| 894 | if ((i == 2) && npids[i] && (dvbdmxfeed->ts_type & TS_PACKET)) { |
| 895 | npids[i] = 0; |
| 896 | ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); |
| 897 | StartHWFilter(dvbdmxfeed->filter); |
| 898 | return; |
| 899 | } |
| 900 | if (dvbdmxfeed->pes_type <= 2 || dvbdmxfeed->pes_type == 4) |
| 901 | ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); |
| 902 | |
| 903 | if (dvbdmxfeed->pes_type < 2 && npids[0]) |
| 904 | if (av7110->fe_synced) |
| 905 | av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); |
| 906 | |
| 907 | if ((dvbdmxfeed->ts_type & TS_PACKET)) { |
| 908 | if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000)) |
| 909 | av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); |
| 910 | if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000)) |
| 911 | av7110_av_start_record(av7110, RP_VIDEO, dvbdmxfeed); |
| 912 | } |
| 913 | } |
| 914 | |
| 915 | static void dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed) |
| 916 | { |
| 917 | struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| 918 | struct av7110 *av7110 = (struct av7110 *) dvbdmx->priv; |
| 919 | u16 *pid = dvbdmx->pids, npids[5]; |
| 920 | int i; |
| 921 | |
| 922 | dprintk(4, "%p\n", av7110); |
| 923 | |
| 924 | if (dvbdmxfeed->pes_type <= 1) { |
| 925 | av7110_av_stop(av7110, dvbdmxfeed->pes_type ? RP_VIDEO : RP_AUDIO); |
| 926 | if (!av7110->rec_mode) |
| 927 | dvbdmx->recording = 0; |
| 928 | if (!av7110->playing) |
| 929 | dvbdmx->playing = 0; |
| 930 | } |
| 931 | npids[0] = npids[1] = npids[2] = npids[3] = npids[4] = 0xffff; |
| 932 | i = dvbdmxfeed->pes_type; |
| 933 | switch (i) { |
| 934 | case 2: //teletext |
| 935 | if (dvbdmxfeed->ts_type & TS_PACKET) |
| 936 | StopHWFilter(dvbdmxfeed->filter); |
| 937 | npids[2] = 0; |
| 938 | break; |
| 939 | case 0: |
| 940 | case 1: |
| 941 | case 4: |
| 942 | if (!pids_off) |
| 943 | return; |
| 944 | npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; |
| 945 | break; |
| 946 | } |
| 947 | ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); |
| 948 | } |
| 949 | |
| 950 | static int av7110_start_feed(struct dvb_demux_feed *feed) |
| 951 | { |
| 952 | struct dvb_demux *demux = feed->demux; |
| 953 | struct av7110 *av7110 = demux->priv; |
| 954 | |
| 955 | dprintk(4, "%p\n", av7110); |
| 956 | |
| 957 | if (!demux->dmx.frontend) |
| 958 | return -EINVAL; |
| 959 | |
| 960 | if (feed->pid > 0x1fff) |
| 961 | return -EINVAL; |
| 962 | |
| 963 | if (feed->type == DMX_TYPE_TS) { |
| 964 | if ((feed->ts_type & TS_DECODER) && |
| 965 | (feed->pes_type < DMX_TS_PES_OTHER)) { |
| 966 | switch (demux->dmx.frontend->source) { |
| 967 | case DMX_MEMORY_FE: |
| 968 | if (feed->ts_type & TS_DECODER) |
| 969 | if (feed->pes_type < 2 && |
| 970 | !(demux->pids[0] & 0x8000) && |
| 971 | !(demux->pids[1] & 0x8000)) { |
| 972 | dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); |
| 973 | dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); |
| 974 | av7110_av_start_play(av7110,RP_AV); |
| 975 | demux->playing = 1; |
| 976 | } |
| 977 | break; |
| 978 | default: |
| 979 | dvb_feed_start_pid(feed); |
| 980 | break; |
| 981 | } |
| 982 | } else if ((feed->ts_type & TS_PACKET) && |
| 983 | (demux->dmx.frontend->source != DMX_MEMORY_FE)) { |
| 984 | StartHWFilter(feed->filter); |
| 985 | } |
| 986 | } |
| 987 | |
| 988 | if (feed->type == DMX_TYPE_SEC) { |
| 989 | int i; |
| 990 | |
| 991 | for (i = 0; i < demux->filternum; i++) { |
| 992 | if (demux->filter[i].state != DMX_STATE_READY) |
| 993 | continue; |
| 994 | if (demux->filter[i].type != DMX_TYPE_SEC) |
| 995 | continue; |
| 996 | if (demux->filter[i].filter.parent != &feed->feed.sec) |
| 997 | continue; |
| 998 | demux->filter[i].state = DMX_STATE_GO; |
| 999 | if (demux->dmx.frontend->source != DMX_MEMORY_FE) |
| 1000 | StartHWFilter(&demux->filter[i]); |
| 1001 | } |
| 1002 | } |
| 1003 | |
| 1004 | return 0; |
| 1005 | } |
| 1006 | |
| 1007 | |
| 1008 | static int av7110_stop_feed(struct dvb_demux_feed *feed) |
| 1009 | { |
| 1010 | struct dvb_demux *demux = feed->demux; |
| 1011 | struct av7110 *av7110 = demux->priv; |
| 1012 | |
| 1013 | dprintk(4, "%p\n", av7110); |
| 1014 | |
| 1015 | if (feed->type == DMX_TYPE_TS) { |
| 1016 | if (feed->ts_type & TS_DECODER) { |
| 1017 | if (feed->pes_type >= DMX_TS_PES_OTHER || |
| 1018 | !demux->pesfilter[feed->pes_type]) |
| 1019 | return -EINVAL; |
| 1020 | demux->pids[feed->pes_type] |= 0x8000; |
| 1021 | demux->pesfilter[feed->pes_type] = NULL; |
| 1022 | } |
| 1023 | if (feed->ts_type & TS_DECODER && |
| 1024 | feed->pes_type < DMX_TS_PES_OTHER) { |
| 1025 | dvb_feed_stop_pid(feed); |
| 1026 | } else |
| 1027 | if ((feed->ts_type & TS_PACKET) && |
| 1028 | (demux->dmx.frontend->source != DMX_MEMORY_FE)) |
| 1029 | StopHWFilter(feed->filter); |
| 1030 | } |
| 1031 | |
| 1032 | if (feed->type == DMX_TYPE_SEC) { |
| 1033 | int i; |
| 1034 | |
| 1035 | for (i = 0; i<demux->filternum; i++) |
| 1036 | if (demux->filter[i].state == DMX_STATE_GO && |
| 1037 | demux->filter[i].filter.parent == &feed->feed.sec) { |
| 1038 | demux->filter[i].state = DMX_STATE_READY; |
| 1039 | if (demux->dmx.frontend->source != DMX_MEMORY_FE) |
| 1040 | StopHWFilter(&demux->filter[i]); |
| 1041 | } |
| 1042 | } |
| 1043 | |
| 1044 | return 0; |
| 1045 | } |
| 1046 | |
| 1047 | |
| 1048 | static void restart_feeds(struct av7110 *av7110) |
| 1049 | { |
| 1050 | struct dvb_demux *dvbdmx = &av7110->demux; |
| 1051 | struct dvb_demux_feed *feed; |
| 1052 | int mode; |
| 1053 | int i; |
| 1054 | |
| 1055 | dprintk(4, "%p\n", av7110); |
| 1056 | |
| 1057 | mode = av7110->playing; |
| 1058 | av7110->playing = 0; |
| 1059 | av7110->rec_mode = 0; |
| 1060 | |
| 1061 | for (i = 0; i < dvbdmx->filternum; i++) { |
| 1062 | feed = &dvbdmx->feed[i]; |
| 1063 | if (feed->state == DMX_STATE_GO) |
| 1064 | av7110_start_feed(feed); |
| 1065 | } |
| 1066 | |
| 1067 | if (mode) |
| 1068 | av7110_av_start_play(av7110, mode); |
| 1069 | } |
| 1070 | |
| 1071 | static int dvb_get_stc(struct dmx_demux *demux, unsigned int num, |
| 1072 | uint64_t *stc, unsigned int *base) |
| 1073 | { |
| 1074 | int ret; |
| 1075 | u16 fwstc[4]; |
| 1076 | u16 tag = ((COMTYPE_REQUEST << 8) + ReqSTC); |
| 1077 | struct dvb_demux *dvbdemux; |
| 1078 | struct av7110 *av7110; |
| 1079 | |
| 1080 | /* pointer casting paranoia... */ |
| 1081 | if (!demux) |
| 1082 | BUG(); |
| 1083 | dvbdemux = (struct dvb_demux *) demux->priv; |
| 1084 | if (!dvbdemux) |
| 1085 | BUG(); |
| 1086 | av7110 = (struct av7110 *) dvbdemux->priv; |
| 1087 | |
| 1088 | dprintk(4, "%p\n", av7110); |
| 1089 | |
| 1090 | if (num != 0) |
| 1091 | return -EINVAL; |
| 1092 | |
| 1093 | ret = av7110_fw_request(av7110, &tag, 0, fwstc, 4); |
| 1094 | if (ret) { |
| 1095 | printk(KERN_ERR "%s: av7110_fw_request error\n", __FUNCTION__); |
| 1096 | return -EIO; |
| 1097 | } |
| 1098 | dprintk(2, "fwstc = %04hx %04hx %04hx %04hx\n", |
| 1099 | fwstc[0], fwstc[1], fwstc[2], fwstc[3]); |
| 1100 | |
| 1101 | *stc = (((uint64_t) ((fwstc[3] & 0x8000) >> 15)) << 32) | |
| 1102 | (((uint64_t) fwstc[1]) << 16) | ((uint64_t) fwstc[0]); |
| 1103 | *base = 1; |
| 1104 | |
| 1105 | dprintk(4, "stc = %lu\n", (unsigned long)*stc); |
| 1106 | |
| 1107 | return 0; |
| 1108 | } |
| 1109 | |
| 1110 | |
| 1111 | /****************************************************************************** |
| 1112 | * SEC device file operations |
| 1113 | ******************************************************************************/ |
| 1114 | |
| 1115 | |
| 1116 | static int av7110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| 1117 | { |
| 1118 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1119 | |
| 1120 | switch (tone) { |
| 1121 | case SEC_TONE_ON: |
| 1122 | Set22K(av7110, 1); |
| 1123 | break; |
| 1124 | |
| 1125 | case SEC_TONE_OFF: |
| 1126 | Set22K(av7110, 0); |
| 1127 | break; |
| 1128 | |
| 1129 | default: |
| 1130 | return -EINVAL; |
| 1131 | } |
| 1132 | |
| 1133 | return 0; |
| 1134 | } |
| 1135 | |
| 1136 | static int av7110_diseqc_send_master_cmd(struct dvb_frontend* fe, |
| 1137 | struct dvb_diseqc_master_cmd* cmd) |
| 1138 | { |
| 1139 | struct av7110* av7110 = fe->dvb->priv; |
| 1140 | |
| 1141 | av7110_diseqc_send(av7110, cmd->msg_len, cmd->msg, -1); |
| 1142 | |
| 1143 | return 0; |
| 1144 | } |
| 1145 | |
| 1146 | static int av7110_diseqc_send_burst(struct dvb_frontend* fe, |
| 1147 | fe_sec_mini_cmd_t minicmd) |
| 1148 | { |
| 1149 | struct av7110* av7110 = fe->dvb->priv; |
| 1150 | |
| 1151 | av7110_diseqc_send(av7110, 0, NULL, minicmd); |
| 1152 | |
| 1153 | return 0; |
| 1154 | } |
| 1155 | |
| 1156 | /* simplified code from budget-core.c */ |
| 1157 | static int stop_ts_capture(struct av7110 *budget) |
| 1158 | { |
| 1159 | dprintk(2, "budget: %p\n", budget); |
| 1160 | |
| 1161 | if (--budget->feeding1) |
| 1162 | return budget->feeding1; |
| 1163 | saa7146_write(budget->dev, MC1, MASK_20); /* DMA3 off */ |
| 1164 | SAA7146_IER_DISABLE(budget->dev, MASK_10); |
| 1165 | SAA7146_ISR_CLEAR(budget->dev, MASK_10); |
| 1166 | return 0; |
| 1167 | } |
| 1168 | |
| 1169 | static int start_ts_capture(struct av7110 *budget) |
| 1170 | { |
| 1171 | dprintk(2, "budget: %p\n", budget); |
| 1172 | |
| 1173 | if (budget->feeding1) |
| 1174 | return ++budget->feeding1; |
| 1175 | memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH); |
| 1176 | budget->tsf = 0xff; |
| 1177 | budget->ttbp = 0; |
| 1178 | SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ |
| 1179 | saa7146_write(budget->dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ |
| 1180 | return ++budget->feeding1; |
| 1181 | } |
| 1182 | |
| 1183 | static int budget_start_feed(struct dvb_demux_feed *feed) |
| 1184 | { |
| 1185 | struct dvb_demux *demux = feed->demux; |
| 1186 | struct av7110 *budget = (struct av7110 *) demux->priv; |
| 1187 | int status; |
| 1188 | |
| 1189 | dprintk(2, "av7110: %p\n", budget); |
| 1190 | |
| 1191 | spin_lock(&budget->feedlock1); |
| 1192 | feed->pusi_seen = 0; /* have a clean section start */ |
| 1193 | status = start_ts_capture(budget); |
| 1194 | spin_unlock(&budget->feedlock1); |
| 1195 | return status; |
| 1196 | } |
| 1197 | |
| 1198 | static int budget_stop_feed(struct dvb_demux_feed *feed) |
| 1199 | { |
| 1200 | struct dvb_demux *demux = feed->demux; |
| 1201 | struct av7110 *budget = (struct av7110 *) demux->priv; |
| 1202 | int status; |
| 1203 | |
| 1204 | dprintk(2, "budget: %p\n", budget); |
| 1205 | |
| 1206 | spin_lock(&budget->feedlock1); |
| 1207 | status = stop_ts_capture(budget); |
| 1208 | spin_unlock(&budget->feedlock1); |
| 1209 | return status; |
| 1210 | } |
| 1211 | |
| 1212 | static void vpeirq(unsigned long data) |
| 1213 | { |
| 1214 | struct av7110 *budget = (struct av7110 *) data; |
| 1215 | u8 *mem = (u8 *) (budget->grabbing); |
| 1216 | u32 olddma = budget->ttbp; |
| 1217 | u32 newdma = saa7146_read(budget->dev, PCI_VDP3); |
| 1218 | |
| 1219 | if (!budgetpatch) { |
| 1220 | printk("av7110.c: vpeirq() called while budgetpatch disabled!" |
| 1221 | " check saa7146 IER register\n"); |
| 1222 | BUG(); |
| 1223 | } |
| 1224 | /* nearest lower position divisible by 188 */ |
| 1225 | newdma -= newdma % 188; |
| 1226 | |
| 1227 | if (newdma >= TS_BUFLEN) |
| 1228 | return; |
| 1229 | |
| 1230 | budget->ttbp = newdma; |
| 1231 | |
| 1232 | if (!budget->feeding1 || (newdma == olddma)) |
| 1233 | return; |
| 1234 | |
| 1235 | #if 0 |
| 1236 | /* track rps1 activity */ |
| 1237 | printk("vpeirq: %02x Event Counter 1 0x%04x\n", |
| 1238 | mem[olddma], |
| 1239 | saa7146_read(budget->dev, EC1R) & 0x3fff); |
| 1240 | #endif |
| 1241 | |
| 1242 | if (newdma > olddma) |
| 1243 | /* no wraparound, dump olddma..newdma */ |
| 1244 | dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (newdma - olddma) / 188); |
| 1245 | else { |
| 1246 | /* wraparound, dump olddma..buflen and 0..newdma */ |
| 1247 | dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (TS_BUFLEN - olddma) / 188); |
| 1248 | dvb_dmx_swfilter_packets(&budget->demux1, mem, newdma / 188); |
| 1249 | } |
| 1250 | } |
| 1251 | |
| 1252 | static int av7110_register(struct av7110 *av7110) |
| 1253 | { |
| 1254 | int ret, i; |
| 1255 | struct dvb_demux *dvbdemux = &av7110->demux; |
| 1256 | struct dvb_demux *dvbdemux1 = &av7110->demux1; |
| 1257 | |
| 1258 | dprintk(4, "%p\n", av7110); |
| 1259 | |
| 1260 | if (av7110->registered) |
| 1261 | return -1; |
| 1262 | |
| 1263 | av7110->registered = 1; |
| 1264 | |
| 1265 | dvbdemux->priv = (void *) av7110; |
| 1266 | |
| 1267 | for (i = 0; i < 32; i++) |
| 1268 | av7110->handle2filter[i] = NULL; |
| 1269 | |
| 1270 | dvbdemux->filternum = 32; |
| 1271 | dvbdemux->feednum = 32; |
| 1272 | dvbdemux->start_feed = av7110_start_feed; |
| 1273 | dvbdemux->stop_feed = av7110_stop_feed; |
| 1274 | dvbdemux->write_to_decoder = av7110_write_to_decoder; |
| 1275 | dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| 1276 | DMX_MEMORY_BASED_FILTERING); |
| 1277 | |
| 1278 | dvb_dmx_init(&av7110->demux); |
| 1279 | av7110->demux.dmx.get_stc = dvb_get_stc; |
| 1280 | |
| 1281 | av7110->dmxdev.filternum = 32; |
| 1282 | av7110->dmxdev.demux = &dvbdemux->dmx; |
| 1283 | av7110->dmxdev.capabilities = 0; |
| 1284 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 1285 | dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1286 | |
| 1287 | av7110->hw_frontend.source = DMX_FRONTEND_0; |
| 1288 | |
| 1289 | ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->hw_frontend); |
| 1290 | |
| 1291 | if (ret < 0) |
| 1292 | return ret; |
| 1293 | |
| 1294 | av7110->mem_frontend.source = DMX_MEMORY_FE; |
| 1295 | |
| 1296 | ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &av7110->mem_frontend); |
| 1297 | |
| 1298 | if (ret < 0) |
| 1299 | return ret; |
| 1300 | |
| 1301 | ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, |
| 1302 | &av7110->hw_frontend); |
| 1303 | if (ret < 0) |
| 1304 | return ret; |
| 1305 | |
| 1306 | av7110_av_register(av7110); |
| 1307 | av7110_ca_register(av7110); |
| 1308 | |
| 1309 | #ifdef CONFIG_DVB_AV7110_OSD |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 1310 | dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1311 | &dvbdev_osd, av7110, DVB_DEVICE_OSD); |
| 1312 | #endif |
| 1313 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 1314 | dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1315 | |
| 1316 | if (budgetpatch) { |
| 1317 | /* initialize software demux1 without its own frontend |
| 1318 | * demux1 hardware is connected to frontend0 of demux0 |
| 1319 | */ |
| 1320 | dvbdemux1->priv = (void *) av7110; |
| 1321 | |
| 1322 | dvbdemux1->filternum = 256; |
| 1323 | dvbdemux1->feednum = 256; |
| 1324 | dvbdemux1->start_feed = budget_start_feed; |
| 1325 | dvbdemux1->stop_feed = budget_stop_feed; |
| 1326 | dvbdemux1->write_to_decoder = NULL; |
| 1327 | |
| 1328 | dvbdemux1->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| 1329 | DMX_MEMORY_BASED_FILTERING); |
| 1330 | |
| 1331 | dvb_dmx_init(&av7110->demux1); |
| 1332 | |
| 1333 | av7110->dmxdev1.filternum = 256; |
| 1334 | av7110->dmxdev1.demux = &dvbdemux1->dmx; |
| 1335 | av7110->dmxdev1.capabilities = 0; |
| 1336 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 1337 | dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1338 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 1339 | dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1340 | printk("dvb-ttpci: additional demux1 for budget-patch registered\n"); |
| 1341 | } |
| 1342 | return 0; |
| 1343 | } |
| 1344 | |
| 1345 | |
| 1346 | static void dvb_unregister(struct av7110 *av7110) |
| 1347 | { |
| 1348 | struct dvb_demux *dvbdemux = &av7110->demux; |
| 1349 | struct dvb_demux *dvbdemux1 = &av7110->demux1; |
| 1350 | |
| 1351 | dprintk(4, "%p\n", av7110); |
| 1352 | |
| 1353 | if (!av7110->registered) |
| 1354 | return; |
| 1355 | |
| 1356 | if (budgetpatch) { |
| 1357 | dvb_net_release(&av7110->dvb_net1); |
| 1358 | dvbdemux->dmx.close(&dvbdemux1->dmx); |
| 1359 | dvb_dmxdev_release(&av7110->dmxdev1); |
| 1360 | dvb_dmx_release(&av7110->demux1); |
| 1361 | } |
| 1362 | |
| 1363 | dvb_net_release(&av7110->dvb_net); |
| 1364 | |
| 1365 | dvbdemux->dmx.close(&dvbdemux->dmx); |
| 1366 | dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->hw_frontend); |
| 1367 | dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &av7110->mem_frontend); |
| 1368 | |
| 1369 | dvb_dmxdev_release(&av7110->dmxdev); |
| 1370 | dvb_dmx_release(&av7110->demux); |
| 1371 | |
| 1372 | if (av7110->fe != NULL) |
| 1373 | dvb_unregister_frontend(av7110->fe); |
| 1374 | dvb_unregister_device(av7110->osd_dev); |
| 1375 | av7110_av_unregister(av7110); |
| 1376 | av7110_ca_unregister(av7110); |
| 1377 | } |
| 1378 | |
| 1379 | |
| 1380 | /**************************************************************************** |
| 1381 | * I2C client commands |
| 1382 | ****************************************************************************/ |
| 1383 | |
| 1384 | int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val) |
| 1385 | { |
| 1386 | u8 msg[2] = { reg, val }; |
| 1387 | struct i2c_msg msgs; |
| 1388 | |
| 1389 | msgs.flags = 0; |
| 1390 | msgs.addr = id / 2; |
| 1391 | msgs.len = 2; |
| 1392 | msgs.buf = msg; |
| 1393 | return i2c_transfer(&av7110->i2c_adap, &msgs, 1); |
| 1394 | } |
| 1395 | |
| 1396 | #if 0 |
| 1397 | u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) |
| 1398 | { |
| 1399 | u8 mm1[] = {0x00}; |
| 1400 | u8 mm2[] = {0x00}; |
| 1401 | struct i2c_msg msgs[2]; |
| 1402 | |
| 1403 | msgs[0].flags = 0; |
| 1404 | msgs[1].flags = I2C_M_RD; |
| 1405 | msgs[0].addr = msgs[1].addr = id / 2; |
| 1406 | mm1[0] = reg; |
| 1407 | msgs[0].len = 1; msgs[1].len = 1; |
| 1408 | msgs[0].buf = mm1; msgs[1].buf = mm2; |
| 1409 | i2c_transfer(&av7110->i2c_adap, msgs, 2); |
| 1410 | |
| 1411 | return mm2[0]; |
| 1412 | } |
| 1413 | #endif |
| 1414 | |
| 1415 | /**************************************************************************** |
| 1416 | * INITIALIZATION |
| 1417 | ****************************************************************************/ |
| 1418 | |
| 1419 | |
| 1420 | static int check_firmware(struct av7110* av7110) |
| 1421 | { |
| 1422 | u32 crc = 0, len = 0; |
| 1423 | unsigned char *ptr; |
| 1424 | |
| 1425 | /* check for firmware magic */ |
| 1426 | ptr = av7110->bin_fw; |
| 1427 | if (ptr[0] != 'A' || ptr[1] != 'V' || |
| 1428 | ptr[2] != 'F' || ptr[3] != 'W') { |
| 1429 | printk("dvb-ttpci: this is not an av7110 firmware\n"); |
| 1430 | return -EINVAL; |
| 1431 | } |
| 1432 | ptr += 4; |
| 1433 | |
| 1434 | /* check dpram file */ |
| 1435 | crc = ntohl(*(u32*) ptr); |
| 1436 | ptr += 4; |
| 1437 | len = ntohl(*(u32*) ptr); |
| 1438 | ptr += 4; |
| 1439 | if (len >= 512) { |
| 1440 | printk("dvb-ttpci: dpram file is way to big.\n"); |
| 1441 | return -EINVAL; |
| 1442 | } |
| 1443 | if (crc != crc32_le(0, ptr, len)) { |
| 1444 | printk("dvb-ttpci: crc32 of dpram file does not match.\n"); |
| 1445 | return -EINVAL; |
| 1446 | } |
| 1447 | av7110->bin_dpram = ptr; |
| 1448 | av7110->size_dpram = len; |
| 1449 | ptr += len; |
| 1450 | |
| 1451 | /* check root file */ |
| 1452 | crc = ntohl(*(u32*) ptr); |
| 1453 | ptr += 4; |
| 1454 | len = ntohl(*(u32*) ptr); |
| 1455 | ptr += 4; |
| 1456 | |
| 1457 | if (len <= 200000 || len >= 300000 || |
| 1458 | len > ((av7110->bin_fw + av7110->size_fw) - ptr)) { |
| 1459 | printk("dvb-ttpci: root file has strange size (%d). aborting.\n", len); |
| 1460 | return -EINVAL; |
| 1461 | } |
| 1462 | if( crc != crc32_le(0, ptr, len)) { |
| 1463 | printk("dvb-ttpci: crc32 of root file does not match.\n"); |
| 1464 | return -EINVAL; |
| 1465 | } |
| 1466 | av7110->bin_root = ptr; |
| 1467 | av7110->size_root = len; |
| 1468 | return 0; |
| 1469 | } |
| 1470 | |
| 1471 | #ifdef CONFIG_DVB_AV7110_FIRMWARE_FILE |
| 1472 | #include "av7110_firm.h" |
| 1473 | static void put_firmware(struct av7110* av7110) |
| 1474 | { |
| 1475 | av7110->bin_fw = NULL; |
| 1476 | } |
| 1477 | |
| 1478 | static inline int get_firmware(struct av7110* av7110) |
| 1479 | { |
| 1480 | av7110->bin_fw = dvb_ttpci_fw; |
| 1481 | av7110->size_fw = sizeof(dvb_ttpci_fw); |
| 1482 | return check_firmware(av7110); |
| 1483 | } |
| 1484 | #else |
| 1485 | static void put_firmware(struct av7110* av7110) |
| 1486 | { |
| 1487 | vfree(av7110->bin_fw); |
| 1488 | } |
| 1489 | |
| 1490 | static int get_firmware(struct av7110* av7110) |
| 1491 | { |
| 1492 | int ret; |
| 1493 | const struct firmware *fw; |
| 1494 | |
| 1495 | /* request the av7110 firmware, this will block until someone uploads it */ |
| 1496 | ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev); |
| 1497 | if (ret) { |
| 1498 | if (ret == -ENOENT) { |
| 1499 | printk(KERN_ERR "dvb-ttpci: could not load firmware," |
| 1500 | " file not found: dvb-ttpci-01.fw\n"); |
| 1501 | printk(KERN_ERR "dvb-ttpci: usually this should be in" |
| 1502 | " /usr/lib/hotplug/firmware\n"); |
| 1503 | printk(KERN_ERR "dvb-ttpci: and can be downloaded here" |
| 1504 | " http://www.linuxtv.org/download/dvb/firmware/\n"); |
| 1505 | } else |
| 1506 | printk(KERN_ERR "dvb-ttpci: cannot request firmware" |
| 1507 | " (error %i)\n", ret); |
| 1508 | return -EINVAL; |
| 1509 | } |
| 1510 | |
| 1511 | if (fw->size <= 200000) { |
| 1512 | printk("dvb-ttpci: this firmware is way too small.\n"); |
| 1513 | release_firmware(fw); |
| 1514 | return -EINVAL; |
| 1515 | } |
| 1516 | |
| 1517 | /* check if the firmware is available */ |
| 1518 | av7110->bin_fw = (unsigned char *) vmalloc(fw->size); |
| 1519 | if (NULL == av7110->bin_fw) { |
| 1520 | dprintk(1, "out of memory\n"); |
| 1521 | release_firmware(fw); |
| 1522 | return -ENOMEM; |
| 1523 | } |
| 1524 | |
| 1525 | memcpy(av7110->bin_fw, fw->data, fw->size); |
| 1526 | av7110->size_fw = fw->size; |
| 1527 | if ((ret = check_firmware(av7110))) |
| 1528 | vfree(av7110->bin_fw); |
| 1529 | |
| 1530 | release_firmware(fw); |
| 1531 | return ret; |
| 1532 | } |
| 1533 | #endif |
| 1534 | |
| 1535 | |
| 1536 | static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1537 | { |
| 1538 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1539 | u8 pwr = 0; |
| 1540 | u8 buf[4]; |
| 1541 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| 1542 | u32 div = (params->frequency + 479500) / 125; |
| 1543 | |
| 1544 | if (params->frequency > 2000000) pwr = 3; |
| 1545 | else if (params->frequency > 1800000) pwr = 2; |
| 1546 | else if (params->frequency > 1600000) pwr = 1; |
| 1547 | else if (params->frequency > 1200000) pwr = 0; |
| 1548 | else if (params->frequency >= 1100000) pwr = 1; |
| 1549 | else pwr = 2; |
| 1550 | |
| 1551 | buf[0] = (div >> 8) & 0x7f; |
| 1552 | buf[1] = div & 0xff; |
| 1553 | buf[2] = ((div & 0x18000) >> 10) | 0x95; |
| 1554 | buf[3] = (pwr << 6) | 0x30; |
| 1555 | |
| 1556 | // NOTE: since we're using a prescaler of 2, we set the |
| 1557 | // divisor frequency to 62.5kHz and divide by 125 above |
| 1558 | |
| 1559 | if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) |
| 1560 | return -EIO; |
| 1561 | return 0; |
| 1562 | } |
| 1563 | |
| 1564 | static struct ves1x93_config alps_bsrv2_config = { |
| 1565 | .demod_address = 0x08, |
| 1566 | .xin = 90100000UL, |
| 1567 | .invert_pwm = 0, |
| 1568 | .pll_set = alps_bsrv2_pll_set, |
| 1569 | }; |
| 1570 | |
| 1571 | |
| 1572 | static u8 alps_bsru6_inittab[] = { |
| 1573 | 0x01, 0x15, |
| 1574 | 0x02, 0x30, |
| 1575 | 0x03, 0x00, |
| 1576 | 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ |
| 1577 | 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ |
| 1578 | 0x06, 0x40, /* DAC not used, set to high impendance mode */ |
| 1579 | 0x07, 0x00, /* DAC LSB */ |
| 1580 | 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ |
| 1581 | 0x09, 0x00, /* FIFO */ |
| 1582 | 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ |
| 1583 | 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ |
| 1584 | 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ |
| 1585 | 0x10, 0x3f, // AGC2 0x3d |
| 1586 | 0x11, 0x84, |
| 1587 | 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on |
| 1588 | 0x15, 0xc9, // lock detector threshold |
| 1589 | 0x16, 0x00, |
| 1590 | 0x17, 0x00, |
| 1591 | 0x18, 0x00, |
| 1592 | 0x19, 0x00, |
| 1593 | 0x1a, 0x00, |
| 1594 | 0x1f, 0x50, |
| 1595 | 0x20, 0x00, |
| 1596 | 0x21, 0x00, |
| 1597 | 0x22, 0x00, |
| 1598 | 0x23, 0x00, |
| 1599 | 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 |
| 1600 | 0x29, 0x1e, // 1/2 threshold |
| 1601 | 0x2a, 0x14, // 2/3 threshold |
| 1602 | 0x2b, 0x0f, // 3/4 threshold |
| 1603 | 0x2c, 0x09, // 5/6 threshold |
| 1604 | 0x2d, 0x05, // 7/8 threshold |
| 1605 | 0x2e, 0x01, |
| 1606 | 0x31, 0x1f, // test all FECs |
| 1607 | 0x32, 0x19, // viterbi and synchro search |
| 1608 | 0x33, 0xfc, // rs control |
| 1609 | 0x34, 0x93, // error control |
| 1610 | 0x0f, 0x52, |
| 1611 | 0xff, 0xff |
| 1612 | }; |
| 1613 | |
| 1614 | static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) |
| 1615 | { |
| 1616 | u8 aclk = 0; |
| 1617 | u8 bclk = 0; |
| 1618 | |
| 1619 | if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } |
| 1620 | else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } |
| 1621 | else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } |
| 1622 | else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } |
| 1623 | else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } |
| 1624 | else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } |
| 1625 | |
| 1626 | stv0299_writereg(fe, 0x13, aclk); |
| 1627 | stv0299_writereg(fe, 0x14, bclk); |
| 1628 | stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); |
| 1629 | stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); |
| 1630 | stv0299_writereg(fe, 0x21, (ratio ) & 0xf0); |
| 1631 | |
| 1632 | return 0; |
| 1633 | } |
| 1634 | |
| 1635 | static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1636 | { |
| 1637 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1638 | int ret; |
| 1639 | u8 data[4]; |
| 1640 | u32 div; |
| 1641 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1642 | |
| 1643 | if ((params->frequency < 950000) || (params->frequency > 2150000)) |
| 1644 | return -EINVAL; |
| 1645 | |
| 1646 | div = (params->frequency + (125 - 1)) / 125; // round correctly |
| 1647 | data[0] = (div >> 8) & 0x7f; |
| 1648 | data[1] = div & 0xff; |
| 1649 | data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; |
| 1650 | data[3] = 0xC4; |
| 1651 | |
| 1652 | if (params->frequency > 1530000) data[3] = 0xc0; |
| 1653 | |
| 1654 | ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); |
| 1655 | if (ret != 1) |
| 1656 | return -EIO; |
| 1657 | return 0; |
| 1658 | } |
| 1659 | |
| 1660 | static struct stv0299_config alps_bsru6_config = { |
| 1661 | |
| 1662 | .demod_address = 0x68, |
| 1663 | .inittab = alps_bsru6_inittab, |
| 1664 | .mclk = 88000000UL, |
| 1665 | .invert = 1, |
| 1666 | .enhanced_tuning = 0, |
| 1667 | .skip_reinit = 0, |
| 1668 | .lock_output = STV0229_LOCKOUTPUT_1, |
| 1669 | .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| 1670 | .min_delay_ms = 100, |
| 1671 | .set_symbol_rate = alps_bsru6_set_symbol_rate, |
| 1672 | .pll_set = alps_bsru6_pll_set, |
| 1673 | }; |
| 1674 | |
| 1675 | |
Johannes Stezenbach | 3dfaebd | 2005-05-16 21:54:19 -0700 | [diff] [blame] | 1676 | static u8 alps_bsbe1_inittab[] = { |
| 1677 | 0x01, 0x15, |
| 1678 | 0x02, 0x30, |
| 1679 | 0x03, 0x00, |
| 1680 | 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ |
| 1681 | 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ |
| 1682 | 0x06, 0x40, /* DAC not used, set to high impendance mode */ |
| 1683 | 0x07, 0x00, /* DAC LSB */ |
| 1684 | 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ |
| 1685 | 0x09, 0x00, /* FIFO */ |
| 1686 | 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ |
| 1687 | 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ |
| 1688 | 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ |
| 1689 | 0x10, 0x3f, // AGC2 0x3d |
| 1690 | 0x11, 0x84, |
| 1691 | 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on |
| 1692 | 0x15, 0xc9, // lock detector threshold |
| 1693 | 0x16, 0x00, |
| 1694 | 0x17, 0x00, |
| 1695 | 0x18, 0x00, |
| 1696 | 0x19, 0x00, |
| 1697 | 0x1a, 0x00, |
| 1698 | 0x1f, 0x50, |
| 1699 | 0x20, 0x00, |
| 1700 | 0x21, 0x00, |
| 1701 | 0x22, 0x00, |
| 1702 | 0x23, 0x00, |
| 1703 | 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 |
| 1704 | 0x29, 0x1e, // 1/2 threshold |
| 1705 | 0x2a, 0x14, // 2/3 threshold |
| 1706 | 0x2b, 0x0f, // 3/4 threshold |
| 1707 | 0x2c, 0x09, // 5/6 threshold |
| 1708 | 0x2d, 0x05, // 7/8 threshold |
| 1709 | 0x2e, 0x01, |
| 1710 | 0x31, 0x1f, // test all FECs |
| 1711 | 0x32, 0x19, // viterbi and synchro search |
| 1712 | 0x33, 0xfc, // rs control |
| 1713 | 0x34, 0x93, // error control |
| 1714 | 0x0f, 0x92, |
| 1715 | 0xff, 0xff |
| 1716 | }; |
| 1717 | |
| 1718 | static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1719 | { |
| 1720 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1721 | int ret; |
| 1722 | u8 data[4]; |
| 1723 | u32 div; |
| 1724 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1725 | |
| 1726 | if ((params->frequency < 950000) || (params->frequency > 2150000)) |
| 1727 | return -EINVAL; |
| 1728 | |
| 1729 | div = (params->frequency + (125 - 1)) / 125; // round correctly |
| 1730 | data[0] = (div >> 8) & 0x7f; |
| 1731 | data[1] = div & 0xff; |
| 1732 | data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; |
| 1733 | data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; |
| 1734 | |
| 1735 | ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); |
| 1736 | return (ret != 1) ? -EIO : 0; |
| 1737 | } |
| 1738 | |
| 1739 | static struct stv0299_config alps_bsbe1_config = { |
| 1740 | .demod_address = 0x68, |
| 1741 | .inittab = alps_bsbe1_inittab, |
| 1742 | .mclk = 88000000UL, |
| 1743 | .invert = 1, |
| 1744 | .enhanced_tuning = 0, |
| 1745 | .skip_reinit = 0, |
| 1746 | .min_delay_ms = 100, |
| 1747 | .set_symbol_rate = alps_bsru6_set_symbol_rate, |
| 1748 | .pll_set = alps_bsbe1_pll_set, |
| 1749 | }; |
| 1750 | |
| 1751 | static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| 1752 | { |
| 1753 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1754 | int ret; |
| 1755 | u8 data[1]; |
| 1756 | struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1757 | |
| 1758 | switch(voltage) { |
| 1759 | case SEC_VOLTAGE_OFF: |
| 1760 | data[0] = 0x00; |
| 1761 | break; |
| 1762 | case SEC_VOLTAGE_13: |
| 1763 | data[0] = 0x44; |
| 1764 | break; |
| 1765 | case SEC_VOLTAGE_18: |
| 1766 | data[0] = 0x4c; |
| 1767 | break; |
| 1768 | default: |
| 1769 | return -EINVAL; |
| 1770 | }; |
| 1771 | |
| 1772 | ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); |
| 1773 | return (ret != 1) ? -EIO : 0; |
| 1774 | } |
| 1775 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1776 | |
| 1777 | static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1778 | { |
| 1779 | struct av7110* av7110 = fe->dvb->priv; |
| 1780 | u32 div; |
| 1781 | u8 data[4]; |
| 1782 | struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1783 | |
| 1784 | div = (params->frequency + 35937500 + 31250) / 62500; |
| 1785 | |
| 1786 | data[0] = (div >> 8) & 0x7f; |
| 1787 | data[1] = div & 0xff; |
| 1788 | data[2] = 0x85 | ((div >> 10) & 0x60); |
| 1789 | data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); |
| 1790 | |
| 1791 | if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) |
| 1792 | return -EIO; |
| 1793 | return 0; |
| 1794 | } |
| 1795 | |
| 1796 | static struct ves1820_config alps_tdbe2_config = { |
| 1797 | .demod_address = 0x09, |
| 1798 | .xin = 57840000UL, |
| 1799 | .invert = 1, |
| 1800 | .selagc = VES1820_SELAGC_SIGNAMPERR, |
| 1801 | .pll_set = alps_tdbe2_pll_set, |
| 1802 | }; |
| 1803 | |
| 1804 | |
| 1805 | |
| 1806 | |
| 1807 | static int grundig_29504_451_pll_set(struct dvb_frontend* fe, |
| 1808 | struct dvb_frontend_parameters* params) |
| 1809 | { |
| 1810 | struct av7110* av7110 = fe->dvb->priv; |
| 1811 | u32 div; |
| 1812 | u8 data[4]; |
| 1813 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1814 | |
| 1815 | div = params->frequency / 125; |
| 1816 | data[0] = (div >> 8) & 0x7f; |
| 1817 | data[1] = div & 0xff; |
| 1818 | data[2] = 0x8e; |
| 1819 | data[3] = 0x00; |
| 1820 | |
| 1821 | if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) |
| 1822 | return -EIO; |
| 1823 | return 0; |
| 1824 | } |
| 1825 | |
| 1826 | static struct tda8083_config grundig_29504_451_config = { |
| 1827 | .demod_address = 0x68, |
| 1828 | .pll_set = grundig_29504_451_pll_set, |
| 1829 | }; |
| 1830 | |
| 1831 | |
| 1832 | |
| 1833 | static int philips_cd1516_pll_set(struct dvb_frontend* fe, |
| 1834 | struct dvb_frontend_parameters* params) |
| 1835 | { |
| 1836 | struct av7110* av7110 = fe->dvb->priv; |
| 1837 | u32 div; |
| 1838 | u32 f = params->frequency; |
| 1839 | u8 data[4]; |
| 1840 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1841 | |
| 1842 | div = (f + 36125000 + 31250) / 62500; |
| 1843 | |
| 1844 | data[0] = (div >> 8) & 0x7f; |
| 1845 | data[1] = div & 0xff; |
| 1846 | data[2] = 0x8e; |
| 1847 | data[3] = (f < 174000000 ? 0xa1 : f < 470000000 ? 0x92 : 0x34); |
| 1848 | |
| 1849 | if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) |
| 1850 | return -EIO; |
| 1851 | return 0; |
| 1852 | } |
| 1853 | |
| 1854 | static struct ves1820_config philips_cd1516_config = { |
| 1855 | .demod_address = 0x09, |
| 1856 | .xin = 57840000UL, |
| 1857 | .invert = 1, |
| 1858 | .selagc = VES1820_SELAGC_SIGNAMPERR, |
| 1859 | .pll_set = philips_cd1516_pll_set, |
| 1860 | }; |
| 1861 | |
| 1862 | |
| 1863 | |
| 1864 | static int alps_tdlb7_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1865 | { |
| 1866 | struct av7110* av7110 = fe->dvb->priv; |
| 1867 | u32 div, pwr; |
| 1868 | u8 data[4]; |
| 1869 | struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1870 | |
| 1871 | div = (params->frequency + 36200000) / 166666; |
| 1872 | |
| 1873 | if (params->frequency <= 782000000) |
| 1874 | pwr = 1; |
| 1875 | else |
| 1876 | pwr = 2; |
| 1877 | |
| 1878 | data[0] = (div >> 8) & 0x7f; |
| 1879 | data[1] = div & 0xff; |
| 1880 | data[2] = 0x85; |
| 1881 | data[3] = pwr << 6; |
| 1882 | |
| 1883 | if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) |
| 1884 | return -EIO; |
| 1885 | return 0; |
| 1886 | } |
| 1887 | |
| 1888 | static int alps_tdlb7_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) |
| 1889 | { |
| 1890 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1891 | |
| 1892 | return request_firmware(fw, name, &av7110->dev->pci->dev); |
| 1893 | } |
| 1894 | |
| 1895 | static struct sp8870_config alps_tdlb7_config = { |
| 1896 | |
| 1897 | .demod_address = 0x71, |
| 1898 | .pll_set = alps_tdlb7_pll_set, |
| 1899 | .request_firmware = alps_tdlb7_request_firmware, |
| 1900 | }; |
| 1901 | |
| 1902 | |
| 1903 | |
| 1904 | static int nexusca_stv0297_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1905 | { |
| 1906 | struct av7110* av7110 = fe->dvb->priv; |
| 1907 | u32 div; |
| 1908 | u8 data[4]; |
| 1909 | struct i2c_msg msg = { .addr = 0x63, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1910 | struct i2c_msg readmsg = { .addr = 0x63, .flags = I2C_M_RD, .buf = data, .len = 1 }; |
| 1911 | int i; |
| 1912 | |
| 1913 | div = (params->frequency + 36150000 + 31250) / 62500; |
| 1914 | |
| 1915 | data[0] = (div >> 8) & 0x7f; |
| 1916 | data[1] = div & 0xff; |
| 1917 | data[2] = 0xce; |
| 1918 | |
| 1919 | if (params->frequency < 45000000) |
| 1920 | return -EINVAL; |
| 1921 | else if (params->frequency < 137000000) |
| 1922 | data[3] = 0x01; |
| 1923 | else if (params->frequency < 403000000) |
| 1924 | data[3] = 0x02; |
| 1925 | else if (params->frequency < 860000000) |
| 1926 | data[3] = 0x04; |
| 1927 | else |
| 1928 | return -EINVAL; |
| 1929 | |
| 1930 | stv0297_enable_plli2c(fe); |
| 1931 | if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) { |
| 1932 | printk("nexusca: pll transfer failed!\n"); |
| 1933 | return -EIO; |
| 1934 | } |
| 1935 | |
| 1936 | // wait for PLL lock |
| 1937 | for(i = 0; i < 20; i++) { |
| 1938 | |
| 1939 | stv0297_enable_plli2c(fe); |
| 1940 | if (i2c_transfer(&av7110->i2c_adap, &readmsg, 1) == 1) |
| 1941 | if (data[0] & 0x40) break; |
| 1942 | msleep(10); |
| 1943 | } |
| 1944 | |
| 1945 | return 0; |
| 1946 | } |
| 1947 | |
| 1948 | static struct stv0297_config nexusca_stv0297_config = { |
| 1949 | |
| 1950 | .demod_address = 0x1C, |
| 1951 | .invert = 1, |
| 1952 | .pll_set = nexusca_stv0297_pll_set, |
| 1953 | }; |
| 1954 | |
| 1955 | |
| 1956 | |
| 1957 | static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 1958 | { |
| 1959 | struct av7110* av7110 = (struct av7110*) fe->dvb->priv; |
| 1960 | u32 div; |
| 1961 | u8 cfg, cpump, band_select; |
| 1962 | u8 data[4]; |
| 1963 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| 1964 | |
| 1965 | div = (36125000 + params->frequency) / 166666; |
| 1966 | |
| 1967 | cfg = 0x88; |
| 1968 | |
| 1969 | if (params->frequency < 175000000) cpump = 2; |
| 1970 | else if (params->frequency < 390000000) cpump = 1; |
| 1971 | else if (params->frequency < 470000000) cpump = 2; |
| 1972 | else if (params->frequency < 750000000) cpump = 1; |
| 1973 | else cpump = 3; |
| 1974 | |
| 1975 | if (params->frequency < 175000000) band_select = 0x0e; |
| 1976 | else if (params->frequency < 470000000) band_select = 0x05; |
| 1977 | else band_select = 0x03; |
| 1978 | |
| 1979 | data[0] = (div >> 8) & 0x7f; |
| 1980 | data[1] = div & 0xff; |
| 1981 | data[2] = ((div >> 10) & 0x60) | cfg; |
| 1982 | data[3] = (cpump << 6) | band_select; |
| 1983 | |
| 1984 | if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) return -EIO; |
| 1985 | return 0; |
| 1986 | } |
| 1987 | |
| 1988 | static struct l64781_config grundig_29504_401_config = { |
| 1989 | .demod_address = 0x55, |
| 1990 | .pll_set = grundig_29504_401_pll_set, |
| 1991 | }; |
| 1992 | |
| 1993 | |
| 1994 | |
| 1995 | static void av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status) |
| 1996 | { |
| 1997 | int synced = (status & FE_HAS_LOCK) ? 1 : 0; |
| 1998 | |
| 1999 | av7110->fe_status = status; |
| 2000 | |
| 2001 | if (av7110->fe_synced == synced) |
| 2002 | return; |
| 2003 | |
| 2004 | av7110->fe_synced = synced; |
| 2005 | |
| 2006 | if (av7110->playing) |
| 2007 | return; |
| 2008 | |
| 2009 | if (down_interruptible(&av7110->pid_mutex)) |
| 2010 | return; |
| 2011 | |
| 2012 | if (av7110->fe_synced) { |
| 2013 | SetPIDs(av7110, av7110->pids[DMX_PES_VIDEO], |
| 2014 | av7110->pids[DMX_PES_AUDIO], |
| 2015 | av7110->pids[DMX_PES_TELETEXT], 0, |
| 2016 | av7110->pids[DMX_PES_PCR]); |
| 2017 | av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); |
| 2018 | } else { |
| 2019 | SetPIDs(av7110, 0, 0, 0, 0, 0); |
| 2020 | av7110_fw_cmd(av7110, COMTYPE_PID_FILTER, FlushTSQueue, 0); |
| 2021 | av7110_wait_msgstate(av7110, GPMQBusy); |
| 2022 | } |
| 2023 | |
| 2024 | up(&av7110->pid_mutex); |
| 2025 | } |
| 2026 | |
| 2027 | static int av7110_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| 2028 | { |
| 2029 | struct av7110* av7110 = fe->dvb->priv; |
| 2030 | av7110_fe_lock_fix(av7110, 0); |
| 2031 | return av7110->fe_set_frontend(fe, params); |
| 2032 | } |
| 2033 | |
| 2034 | static int av7110_fe_init(struct dvb_frontend* fe) |
| 2035 | { |
| 2036 | struct av7110* av7110 = fe->dvb->priv; |
| 2037 | |
| 2038 | av7110_fe_lock_fix(av7110, 0); |
| 2039 | return av7110->fe_init(fe); |
| 2040 | } |
| 2041 | |
| 2042 | static int av7110_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| 2043 | { |
| 2044 | struct av7110* av7110 = fe->dvb->priv; |
| 2045 | int ret; |
| 2046 | |
| 2047 | /* call the real implementation */ |
| 2048 | ret = av7110->fe_read_status(fe, status); |
| 2049 | if (ret) |
| 2050 | return ret; |
| 2051 | |
| 2052 | if (((*status ^ av7110->fe_status) & FE_HAS_LOCK) && (*status & FE_HAS_LOCK)) { |
| 2053 | av7110_fe_lock_fix(av7110, *status); |
| 2054 | } |
| 2055 | |
| 2056 | return 0; |
| 2057 | } |
| 2058 | |
| 2059 | static int av7110_fe_diseqc_reset_overload(struct dvb_frontend* fe) |
| 2060 | { |
| 2061 | struct av7110* av7110 = fe->dvb->priv; |
| 2062 | |
| 2063 | av7110_fe_lock_fix(av7110, 0); |
| 2064 | return av7110->fe_diseqc_reset_overload(fe); |
| 2065 | } |
| 2066 | |
| 2067 | static int av7110_fe_diseqc_send_master_cmd(struct dvb_frontend* fe, |
| 2068 | struct dvb_diseqc_master_cmd* cmd) |
| 2069 | { |
| 2070 | struct av7110* av7110 = fe->dvb->priv; |
| 2071 | |
| 2072 | av7110_fe_lock_fix(av7110, 0); |
| 2073 | return av7110->fe_diseqc_send_master_cmd(fe, cmd); |
| 2074 | } |
| 2075 | |
| 2076 | static int av7110_fe_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) |
| 2077 | { |
| 2078 | struct av7110* av7110 = fe->dvb->priv; |
| 2079 | |
| 2080 | av7110_fe_lock_fix(av7110, 0); |
| 2081 | return av7110->fe_diseqc_send_burst(fe, minicmd); |
| 2082 | } |
| 2083 | |
| 2084 | static int av7110_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| 2085 | { |
| 2086 | struct av7110* av7110 = fe->dvb->priv; |
| 2087 | |
| 2088 | av7110_fe_lock_fix(av7110, 0); |
| 2089 | return av7110->fe_set_tone(fe, tone); |
| 2090 | } |
| 2091 | |
| 2092 | static int av7110_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| 2093 | { |
| 2094 | struct av7110* av7110 = fe->dvb->priv; |
| 2095 | |
| 2096 | av7110_fe_lock_fix(av7110, 0); |
| 2097 | return av7110->fe_set_voltage(fe, voltage); |
| 2098 | } |
| 2099 | |
| 2100 | static int av7110_fe_dishnetwork_send_legacy_command(struct dvb_frontend* fe, unsigned int cmd) |
| 2101 | { |
| 2102 | struct av7110* av7110 = fe->dvb->priv; |
| 2103 | |
| 2104 | av7110_fe_lock_fix(av7110, 0); |
| 2105 | return av7110->fe_dishnetwork_send_legacy_command(fe, cmd); |
| 2106 | } |
| 2107 | |
| 2108 | static u8 read_pwm(struct av7110* av7110) |
| 2109 | { |
| 2110 | u8 b = 0xff; |
| 2111 | u8 pwm; |
| 2112 | struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, |
| 2113 | { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; |
| 2114 | |
| 2115 | if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) |
| 2116 | pwm = 0x48; |
| 2117 | |
| 2118 | return pwm; |
| 2119 | } |
| 2120 | |
| 2121 | static int frontend_init(struct av7110 *av7110) |
| 2122 | { |
| 2123 | int ret; |
| 2124 | |
| 2125 | if (av7110->dev->pci->subsystem_vendor == 0x110a) { |
| 2126 | switch(av7110->dev->pci->subsystem_device) { |
| 2127 | case 0x0000: // Fujitsu/Siemens DVB-Cable (ves1820/Philips CD1516(??)) |
| 2128 | av7110->fe = ves1820_attach(&philips_cd1516_config, |
| 2129 | &av7110->i2c_adap, read_pwm(av7110)); |
| 2130 | break; |
| 2131 | } |
| 2132 | |
| 2133 | } else if (av7110->dev->pci->subsystem_vendor == 0x13c2) { |
| 2134 | switch(av7110->dev->pci->subsystem_device) { |
| 2135 | case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X |
| 2136 | case 0x0003: // Hauppauge/TT WinTV Nexus-S Rev 2.X |
| 2137 | case 0x1002: // Hauppauge/TT WinTV DVB-S rev1.3SE |
| 2138 | |
| 2139 | // try the ALPS BSRV2 first of all |
| 2140 | av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap); |
| 2141 | if (av7110->fe) { |
| 2142 | av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; |
| 2143 | av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst; |
| 2144 | av7110->fe->ops->set_tone = av7110_set_tone; |
| 2145 | break; |
| 2146 | } |
| 2147 | |
| 2148 | // try the ALPS BSRU6 now |
| 2149 | av7110->fe = stv0299_attach(&alps_bsru6_config, &av7110->i2c_adap); |
| 2150 | if (av7110->fe) { |
| 2151 | av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; |
| 2152 | av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst; |
| 2153 | av7110->fe->ops->set_tone = av7110_set_tone; |
| 2154 | break; |
| 2155 | } |
| 2156 | |
| 2157 | // Try the grundig 29504-451 |
| 2158 | av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap); |
| 2159 | if (av7110->fe) { |
| 2160 | av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; |
| 2161 | av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst; |
| 2162 | av7110->fe->ops->set_tone = av7110_set_tone; |
| 2163 | break; |
| 2164 | } |
| 2165 | |
| 2166 | /* Try DVB-C cards */ |
| 2167 | switch(av7110->dev->pci->subsystem_device) { |
| 2168 | case 0x0000: |
| 2169 | /* Siemens DVB-C (full-length card) VES1820/Philips CD1516 */ |
| 2170 | av7110->fe = ves1820_attach(&philips_cd1516_config, &av7110->i2c_adap, |
| 2171 | read_pwm(av7110)); |
| 2172 | break; |
| 2173 | case 0x0003: |
| 2174 | /* Haupauge DVB-C 2.1 VES1820/ALPS TDBE2 */ |
| 2175 | av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, |
| 2176 | read_pwm(av7110)); |
| 2177 | break; |
| 2178 | } |
| 2179 | break; |
| 2180 | |
| 2181 | case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X |
| 2182 | |
| 2183 | // ALPS TDLB7 |
| 2184 | av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap); |
| 2185 | break; |
| 2186 | |
| 2187 | case 0x0002: // Hauppauge/TT DVB-C premium rev2.X |
| 2188 | |
| 2189 | av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110)); |
| 2190 | break; |
| 2191 | |
| 2192 | case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */ |
| 2193 | /* Grundig 29504-451 */ |
| 2194 | av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap); |
| 2195 | if (av7110->fe) { |
| 2196 | av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; |
| 2197 | av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst; |
| 2198 | av7110->fe->ops->set_tone = av7110_set_tone; |
| 2199 | } |
| 2200 | break; |
| 2201 | |
| 2202 | case 0x0008: // Hauppauge/TT DVB-T |
| 2203 | |
| 2204 | av7110->fe = l64781_attach(&grundig_29504_401_config, &av7110->i2c_adap); |
| 2205 | break; |
| 2206 | |
| 2207 | case 0x000A: // Hauppauge/TT Nexus-CA rev1.X |
| 2208 | |
| 2209 | av7110->fe = stv0297_attach(&nexusca_stv0297_config, &av7110->i2c_adap, 0x7b); |
| 2210 | if (av7110->fe) { |
| 2211 | /* set TDA9819 into DVB mode */ |
| 2212 | saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD) |
| 2213 | saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF) |
| 2214 | |
| 2215 | /* tuner on this needs a slower i2c bus speed */ |
| 2216 | av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; |
| 2217 | break; |
| 2218 | } |
Johannes Stezenbach | 3dfaebd | 2005-05-16 21:54:19 -0700 | [diff] [blame] | 2219 | break; |
| 2220 | |
| 2221 | case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */ |
| 2222 | /* ALPS BSBE1 */ |
| 2223 | av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap); |
| 2224 | if (av7110->fe) |
| 2225 | av7110->fe->ops->set_voltage = lnbp21_set_voltage; |
| 2226 | break; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2227 | } |
| 2228 | } |
| 2229 | |
| 2230 | if (!av7110->fe) { |
| 2231 | /* FIXME: propagate the failure code from the lower layers */ |
| 2232 | ret = -ENOMEM; |
| 2233 | printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", |
| 2234 | av7110->dev->pci->vendor, |
| 2235 | av7110->dev->pci->device, |
| 2236 | av7110->dev->pci->subsystem_vendor, |
| 2237 | av7110->dev->pci->subsystem_device); |
| 2238 | } else { |
| 2239 | FE_FUNC_OVERRIDE(av7110->fe->ops->init, av7110->fe_init, av7110_fe_init); |
| 2240 | FE_FUNC_OVERRIDE(av7110->fe->ops->read_status, av7110->fe_read_status, av7110_fe_read_status); |
| 2241 | FE_FUNC_OVERRIDE(av7110->fe->ops->diseqc_reset_overload, av7110->fe_diseqc_reset_overload, av7110_fe_diseqc_reset_overload); |
| 2242 | FE_FUNC_OVERRIDE(av7110->fe->ops->diseqc_send_master_cmd, av7110->fe_diseqc_send_master_cmd, av7110_fe_diseqc_send_master_cmd); |
| 2243 | FE_FUNC_OVERRIDE(av7110->fe->ops->diseqc_send_burst, av7110->fe_diseqc_send_burst, av7110_fe_diseqc_send_burst); |
| 2244 | FE_FUNC_OVERRIDE(av7110->fe->ops->set_tone, av7110->fe_set_tone, av7110_fe_set_tone); |
| 2245 | FE_FUNC_OVERRIDE(av7110->fe->ops->set_voltage, av7110->fe_set_voltage, av7110_fe_set_voltage;) |
| 2246 | FE_FUNC_OVERRIDE(av7110->fe->ops->dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command); |
| 2247 | FE_FUNC_OVERRIDE(av7110->fe->ops->set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend); |
| 2248 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 2249 | ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2250 | if (ret < 0) { |
| 2251 | printk("av7110: Frontend registration failed!\n"); |
| 2252 | if (av7110->fe->ops->release) |
| 2253 | av7110->fe->ops->release(av7110->fe); |
| 2254 | av7110->fe = NULL; |
| 2255 | } |
| 2256 | } |
| 2257 | return ret; |
| 2258 | } |
| 2259 | |
| 2260 | /* Budgetpatch note: |
| 2261 | * Original hardware design by Roberto Deza: |
| 2262 | * There is a DVB_Wiki at |
| 2263 | * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page |
| 2264 | * where is described this 'DVB TT Budget Patch', on Card Modding: |
| 2265 | * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch |
| 2266 | * On the short description there is also a link to a external file, |
| 2267 | * with more details: |
| 2268 | * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip |
| 2269 | * |
| 2270 | * New software triggering design by Emard that works on |
| 2271 | * original Roberto Deza's hardware: |
| 2272 | * |
| 2273 | * rps1 code for budgetpatch will copy internal HS event to GPIO3 pin. |
| 2274 | * GPIO3 is in budget-patch hardware connectd to port B VSYNC |
| 2275 | * HS is an internal event of 7146, accessible with RPS |
| 2276 | * and temporarily raised high every n lines |
| 2277 | * (n in defined in the RPS_THRESH1 counter threshold) |
| 2278 | * I think HS is raised high on the beginning of the n-th line |
| 2279 | * and remains high until this n-th line that triggered |
| 2280 | * it is completely received. When the receiption of n-th line |
| 2281 | * ends, HS is lowered. |
| 2282 | * |
| 2283 | * To transmit data over DMA, 7146 needs changing state at |
| 2284 | * port B VSYNC pin. Any changing of port B VSYNC will |
| 2285 | * cause some DMA data transfer, with more or less packets loss. |
| 2286 | * It depends on the phase and frequency of VSYNC and |
| 2287 | * the way of 7146 is instructed to trigger on port B (defined |
| 2288 | * in DD1_INIT register, 3rd nibble from the right valid |
| 2289 | * numbers are 0-7, see datasheet) |
| 2290 | * |
| 2291 | * The correct triggering can minimize packet loss, |
| 2292 | * dvbtraffic should give this stable bandwidths: |
| 2293 | * 22k transponder = 33814 kbit/s |
| 2294 | * 27.5k transponder = 38045 kbit/s |
| 2295 | * by experiment it is found that the best results |
| 2296 | * (stable bandwidths and almost no packet loss) |
| 2297 | * are obtained using DD1_INIT triggering number 2 |
| 2298 | * (Va at rising edge of VS Fa = HS x VS-failing forced toggle) |
| 2299 | * and a VSYNC phase that occurs in the middle of DMA transfer |
| 2300 | * (about byte 188*512=96256 in the DMA window). |
| 2301 | * |
| 2302 | * Phase of HS is still not clear to me how to control, |
| 2303 | * It just happens to be so. It can be seen if one enables |
| 2304 | * RPS_IRQ and print Event Counter 1 in vpeirq(). Every |
| 2305 | * time RPS_INTERRUPT is called, the Event Counter 1 will |
| 2306 | * increment. That's how the 7146 is programmed to do event |
| 2307 | * counting in this budget-patch.c |
| 2308 | * I *think* HPS setting has something to do with the phase |
| 2309 | * of HS but I cant be 100% sure in that. |
| 2310 | * |
| 2311 | * hardware debug note: a working budget card (including budget patch) |
| 2312 | * with vpeirq() interrupt setup in mode "0x90" (every 64K) will |
| 2313 | * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes |
| 2314 | * and that means 3*25=75 Hz of interrupt freqency, as seen by |
| 2315 | * watch cat /proc/interrupts |
| 2316 | * |
| 2317 | * If this frequency is 3x lower (and data received in the DMA |
| 2318 | * buffer don't start with 0x47, but in the middle of packets, |
| 2319 | * whose lengths appear to be like 188 292 188 104 etc. |
| 2320 | * this means VSYNC line is not connected in the hardware. |
| 2321 | * (check soldering pcb and pins) |
| 2322 | * The same behaviour of missing VSYNC can be duplicated on budget |
| 2323 | * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. |
| 2324 | */ |
| 2325 | static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext) |
| 2326 | { |
| 2327 | const int length = TS_WIDTH * TS_HEIGHT; |
| 2328 | struct pci_dev *pdev = dev->pci; |
| 2329 | struct av7110 *av7110; |
| 2330 | int ret, count = 0; |
| 2331 | |
| 2332 | dprintk(4, "dev: %p\n", dev); |
| 2333 | |
| 2334 | /* Set RPS_IRQ to 1 to track rps1 activity. |
| 2335 | * Enabling this won't send any interrupt to PC CPU. |
| 2336 | */ |
| 2337 | #define RPS_IRQ 0 |
| 2338 | |
| 2339 | if (budgetpatch == 1) { |
| 2340 | budgetpatch = 0; |
| 2341 | /* autodetect the presence of budget patch |
| 2342 | * this only works if saa7146 has been recently |
| 2343 | * reset with with MASK_31 to MC1 |
| 2344 | * |
| 2345 | * will wait for VBI_B event (vertical blank at port B) |
| 2346 | * and will reset GPIO3 after VBI_B is detected. |
| 2347 | * (GPIO3 should be raised high by CPU to |
| 2348 | * test if GPIO3 will generate vertical blank signal |
| 2349 | * in budget patch GPIO3 is connected to VSYNC_B |
| 2350 | */ |
| 2351 | |
| 2352 | /* RESET SAA7146 */ |
| 2353 | saa7146_write(dev, MC1, MASK_31); |
| 2354 | /* autodetection success seems to be time-dependend after reset */ |
| 2355 | |
| 2356 | /* Fix VSYNC level */ |
| 2357 | saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); |
| 2358 | /* set vsync_b triggering */ |
| 2359 | saa7146_write(dev, DD1_STREAM_B, 0); |
| 2360 | /* port B VSYNC at rising edge */ |
| 2361 | saa7146_write(dev, DD1_INIT, 0x00000200); |
| 2362 | saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI |
| 2363 | saa7146_write(dev, MC2, |
| 2364 | 1 * (MASK_08 | MASK_24) | // BRS control |
| 2365 | 0 * (MASK_09 | MASK_25) | // a |
| 2366 | 1 * (MASK_10 | MASK_26) | // b |
| 2367 | 0 * (MASK_06 | MASK_22) | // HPS_CTRL1 |
| 2368 | 0 * (MASK_05 | MASK_21) | // HPS_CTRL2 |
| 2369 | 0 * (MASK_01 | MASK_15) // DEBI |
| 2370 | ); |
| 2371 | |
| 2372 | /* start writing RPS1 code from beginning */ |
| 2373 | count = 0; |
| 2374 | /* Disable RPS1 */ |
| 2375 | saa7146_write(dev, MC1, MASK_29); |
| 2376 | /* RPS1 timeout disable */ |
| 2377 | saa7146_write(dev, RPS_TOV1, 0); |
| 2378 | WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); |
| 2379 | WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); |
| 2380 | WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); |
| 2381 | WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); |
| 2382 | #if RPS_IRQ |
| 2383 | /* issue RPS1 interrupt to increment counter */ |
| 2384 | WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); |
| 2385 | #endif |
| 2386 | WRITE_RPS1(cpu_to_le32(CMD_STOP)); |
| 2387 | /* Jump to begin of RPS program as safety measure (p37) */ |
| 2388 | WRITE_RPS1(cpu_to_le32(CMD_JUMP)); |
| 2389 | WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); |
| 2390 | |
| 2391 | #if RPS_IRQ |
| 2392 | /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) |
| 2393 | * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled |
| 2394 | * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called |
| 2395 | */ |
| 2396 | saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); |
| 2397 | /* set event counter 1 treshold to maximum allowed value (rEC p55) */ |
| 2398 | saa7146_write(dev, ECT1R, 0x3fff ); |
| 2399 | #endif |
| 2400 | /* Set RPS1 Address register to point to RPS code (r108 p42) */ |
| 2401 | saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); |
| 2402 | /* Enable RPS1, (rFC p33) */ |
| 2403 | saa7146_write(dev, MC1, (MASK_13 | MASK_29 )); |
| 2404 | |
| 2405 | mdelay(10); |
| 2406 | /* now send VSYNC_B to rps1 by rising GPIO3 */ |
| 2407 | saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); |
| 2408 | mdelay(10); |
| 2409 | /* if rps1 responded by lowering the GPIO3, |
| 2410 | * then we have budgetpatch hardware |
| 2411 | */ |
| 2412 | if ((saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0) { |
| 2413 | budgetpatch = 1; |
| 2414 | printk("dvb-ttpci: BUDGET-PATCH DETECTED.\n"); |
| 2415 | } |
| 2416 | /* Disable RPS1 */ |
| 2417 | saa7146_write(dev, MC1, ( MASK_29 )); |
| 2418 | #if RPS_IRQ |
| 2419 | printk("dvb-ttpci: Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); |
| 2420 | #endif |
| 2421 | } |
| 2422 | |
| 2423 | /* prepare the av7110 device struct */ |
| 2424 | av7110 = kmalloc(sizeof(struct av7110), GFP_KERNEL); |
| 2425 | if (!av7110) { |
| 2426 | dprintk(1, "out of memory\n"); |
| 2427 | return -ENOMEM; |
| 2428 | } |
| 2429 | |
| 2430 | memset(av7110, 0, sizeof(struct av7110)); |
| 2431 | |
| 2432 | av7110->card_name = (char*) pci_ext->ext_priv; |
| 2433 | av7110->dev = dev; |
| 2434 | dev->ext_priv = av7110; |
| 2435 | |
| 2436 | ret = get_firmware(av7110); |
| 2437 | if (ret < 0) |
| 2438 | goto err_kfree_0; |
| 2439 | |
| 2440 | ret = dvb_register_adapter(&av7110->dvb_adapter, av7110->card_name, |
| 2441 | THIS_MODULE); |
| 2442 | if (ret < 0) |
| 2443 | goto err_put_firmware_1; |
| 2444 | |
| 2445 | /* the Siemens DVB needs this if you want to have the i2c chips |
| 2446 | get recognized before the main driver is fully loaded */ |
| 2447 | saa7146_write(dev, GPIO_CTRL, 0x500000); |
| 2448 | |
| 2449 | #ifdef I2C_ADAP_CLASS_TV_DIGITAL |
| 2450 | av7110->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL; |
| 2451 | #else |
| 2452 | av7110->i2c_adap.class = I2C_CLASS_TV_DIGITAL; |
| 2453 | #endif |
| 2454 | strlcpy(av7110->i2c_adap.name, pci_ext->ext_priv, sizeof(av7110->i2c_adap.name)); |
| 2455 | |
| 2456 | saa7146_i2c_adapter_prepare(dev, &av7110->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); /* 275 kHz */ |
| 2457 | |
| 2458 | ret = i2c_add_adapter(&av7110->i2c_adap); |
| 2459 | if (ret < 0) |
| 2460 | goto err_dvb_unregister_adapter_2; |
| 2461 | |
| 2462 | ttpci_eeprom_parse_mac(&av7110->i2c_adap, |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 2463 | av7110->dvb_adapter.proposed_mac); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2464 | ret = -ENOMEM; |
| 2465 | |
| 2466 | if (budgetpatch) { |
| 2467 | spin_lock_init(&av7110->feedlock1); |
| 2468 | av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, |
| 2469 | &av7110->pt); |
| 2470 | if (!av7110->grabbing) |
| 2471 | goto err_i2c_del_3; |
| 2472 | |
| 2473 | saa7146_write(dev, PCI_BT_V1, 0x1c1f101f); |
| 2474 | saa7146_write(dev, BCS_CTRL, 0x80400040); |
| 2475 | /* set dd1 stream a & b */ |
| 2476 | saa7146_write(dev, DD1_STREAM_B, 0x00000000); |
| 2477 | saa7146_write(dev, DD1_INIT, 0x03000200); |
| 2478 | saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| 2479 | saa7146_write(dev, BRS_CTRL, 0x60000000); |
| 2480 | saa7146_write(dev, BASE_ODD3, 0); |
| 2481 | saa7146_write(dev, BASE_EVEN3, 0); |
| 2482 | saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); |
| 2483 | saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90); |
| 2484 | |
| 2485 | saa7146_write(dev, PITCH3, TS_WIDTH); |
| 2486 | saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); |
| 2487 | |
| 2488 | /* upload all */ |
| 2489 | saa7146_write(dev, MC2, 0x077c077c); |
| 2490 | saa7146_write(dev, GPIO_CTRL, 0x000000); |
| 2491 | #if RPS_IRQ |
| 2492 | /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) |
| 2493 | * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled |
| 2494 | * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called |
| 2495 | */ |
| 2496 | saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); |
| 2497 | /* set event counter 1 treshold to maximum allowed value (rEC p55) */ |
| 2498 | saa7146_write(dev, ECT1R, 0x3fff ); |
| 2499 | #endif |
| 2500 | /* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */ |
| 2501 | count = 0; |
| 2502 | |
| 2503 | /* Wait Source Line Counter Threshold (p36) */ |
| 2504 | WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); |
| 2505 | /* Set GPIO3=1 (p42) */ |
| 2506 | WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); |
| 2507 | WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); |
| 2508 | WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); |
| 2509 | #if RPS_IRQ |
| 2510 | /* issue RPS1 interrupt */ |
| 2511 | WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); |
| 2512 | #endif |
| 2513 | /* Wait reset Source Line Counter Threshold (p36) */ |
| 2514 | WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); |
| 2515 | /* Set GPIO3=0 (p42) */ |
| 2516 | WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); |
| 2517 | WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); |
| 2518 | WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); |
| 2519 | #if RPS_IRQ |
| 2520 | /* issue RPS1 interrupt */ |
| 2521 | WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); |
| 2522 | #endif |
| 2523 | /* Jump to begin of RPS program (p37) */ |
| 2524 | WRITE_RPS1(cpu_to_le32(CMD_JUMP)); |
| 2525 | WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); |
| 2526 | |
| 2527 | /* Fix VSYNC level */ |
| 2528 | saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); |
| 2529 | /* Set RPS1 Address register to point to RPS code (r108 p42) */ |
| 2530 | saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); |
| 2531 | /* Set Source Line Counter Threshold, using BRS (rCC p43) |
| 2532 | * It generates HS event every TS_HEIGHT lines |
| 2533 | * this is related to TS_WIDTH set in register |
| 2534 | * NUM_LINE_BYTE3. If NUM_LINE_BYTE low 16 bits |
| 2535 | * are set to TS_WIDTH bytes (TS_WIDTH=2*188), |
| 2536 | * then RPS_THRESH1 should be set to trigger |
| 2537 | * every TS_HEIGHT (512) lines. |
| 2538 | */ |
| 2539 | saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 ); |
| 2540 | |
| 2541 | /* Enable RPS1 (rFC p33) */ |
| 2542 | saa7146_write(dev, MC1, (MASK_13 | MASK_29)); |
| 2543 | |
| 2544 | /* end of budgetpatch register initialization */ |
| 2545 | tasklet_init (&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110); |
| 2546 | } else { |
| 2547 | saa7146_write(dev, PCI_BT_V1, 0x1c00101f); |
| 2548 | saa7146_write(dev, BCS_CTRL, 0x80400040); |
| 2549 | |
| 2550 | /* set dd1 stream a & b */ |
| 2551 | saa7146_write(dev, DD1_STREAM_B, 0x00000000); |
| 2552 | saa7146_write(dev, DD1_INIT, 0x03000000); |
| 2553 | saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| 2554 | |
| 2555 | /* upload all */ |
| 2556 | saa7146_write(dev, MC2, 0x077c077c); |
| 2557 | saa7146_write(dev, GPIO_CTRL, 0x000000); |
| 2558 | } |
| 2559 | |
| 2560 | tasklet_init (&av7110->debi_tasklet, debiirq, (unsigned long) av7110); |
| 2561 | tasklet_init (&av7110->gpio_tasklet, gpioirq, (unsigned long) av7110); |
| 2562 | |
| 2563 | sema_init(&av7110->pid_mutex, 1); |
| 2564 | |
| 2565 | /* locks for data transfers from/to AV7110 */ |
| 2566 | spin_lock_init(&av7110->debilock); |
| 2567 | sema_init(&av7110->dcomlock, 1); |
| 2568 | av7110->debitype = -1; |
| 2569 | |
| 2570 | /* default OSD window */ |
| 2571 | av7110->osdwin = 1; |
| 2572 | sema_init(&av7110->osd_sema, 1); |
| 2573 | |
| 2574 | /* ARM "watchdog" */ |
| 2575 | init_waitqueue_head(&av7110->arm_wait); |
| 2576 | av7110->arm_thread = NULL; |
| 2577 | |
| 2578 | /* allocate and init buffers */ |
| 2579 | av7110->debi_virt = pci_alloc_consistent(pdev, 8192, &av7110->debi_bus); |
| 2580 | if (!av7110->debi_virt) |
| 2581 | goto err_saa71466_vfree_4; |
| 2582 | |
| 2583 | |
| 2584 | av7110->iobuf = vmalloc(AVOUTLEN+AOUTLEN+BMPLEN+4*IPACKS); |
| 2585 | if (!av7110->iobuf) |
| 2586 | goto err_pci_free_5; |
| 2587 | |
| 2588 | ret = av7110_av_init(av7110); |
| 2589 | if (ret < 0) |
| 2590 | goto err_iobuf_vfree_6; |
| 2591 | |
| 2592 | /* init BMP buffer */ |
| 2593 | av7110->bmpbuf = av7110->iobuf+AVOUTLEN+AOUTLEN; |
| 2594 | init_waitqueue_head(&av7110->bmpq); |
| 2595 | |
| 2596 | ret = av7110_ca_init(av7110); |
| 2597 | if (ret < 0) |
| 2598 | goto err_av7110_av_exit_7; |
| 2599 | |
| 2600 | /* load firmware into AV7110 cards */ |
| 2601 | ret = av7110_bootarm(av7110); |
| 2602 | if (ret < 0) |
| 2603 | goto err_av7110_ca_exit_8; |
| 2604 | |
| 2605 | ret = av7110_firmversion(av7110); |
| 2606 | if (ret < 0) |
| 2607 | goto err_stop_arm_9; |
| 2608 | |
| 2609 | if (FW_VERSION(av7110->arm_app)<0x2501) |
| 2610 | printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. " |
| 2611 | "System might be unstable!\n", FW_VERSION(av7110->arm_app)); |
| 2612 | |
| 2613 | ret = kernel_thread(arm_thread, (void *) av7110, 0); |
| 2614 | if (ret < 0) |
| 2615 | goto err_stop_arm_9; |
| 2616 | |
| 2617 | /* set initial volume in mixer struct */ |
| 2618 | av7110->mixer.volume_left = volume; |
| 2619 | av7110->mixer.volume_right = volume; |
| 2620 | |
| 2621 | init_av7110_av(av7110); |
| 2622 | |
| 2623 | ret = av7110_register(av7110); |
| 2624 | if (ret < 0) |
| 2625 | goto err_arm_thread_stop_10; |
| 2626 | |
| 2627 | /* special case DVB-C: these cards have an analog tuner |
| 2628 | plus need some special handling, so we have separate |
| 2629 | saa7146_ext_vv data for these... */ |
| 2630 | ret = av7110_init_v4l(av7110); |
| 2631 | if (ret < 0) |
| 2632 | goto err_av7110_unregister_11; |
| 2633 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 2634 | av7110->dvb_adapter.priv = av7110; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2635 | ret = frontend_init(av7110); |
| 2636 | if (ret < 0) |
| 2637 | goto err_av7110_exit_v4l_12; |
| 2638 | |
| 2639 | #if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE) |
| 2640 | av7110_ir_init(); |
| 2641 | #endif |
| 2642 | printk(KERN_INFO "dvb-ttpci: found av7110-%d.\n", av7110_num); |
| 2643 | av7110_num++; |
| 2644 | out: |
| 2645 | return ret; |
| 2646 | |
| 2647 | err_av7110_exit_v4l_12: |
| 2648 | av7110_exit_v4l(av7110); |
| 2649 | err_av7110_unregister_11: |
| 2650 | dvb_unregister(av7110); |
| 2651 | err_arm_thread_stop_10: |
| 2652 | av7110_arm_sync(av7110); |
| 2653 | err_stop_arm_9: |
| 2654 | /* Nothing to do. Rejoice. */ |
| 2655 | err_av7110_ca_exit_8: |
| 2656 | av7110_ca_exit(av7110); |
| 2657 | err_av7110_av_exit_7: |
| 2658 | av7110_av_exit(av7110); |
| 2659 | err_iobuf_vfree_6: |
| 2660 | vfree(av7110->iobuf); |
| 2661 | err_pci_free_5: |
| 2662 | pci_free_consistent(pdev, 8192, av7110->debi_virt, av7110->debi_bus); |
| 2663 | err_saa71466_vfree_4: |
| 2664 | if (!av7110->grabbing) |
| 2665 | saa7146_pgtable_free(pdev, &av7110->pt); |
| 2666 | err_i2c_del_3: |
| 2667 | i2c_del_adapter(&av7110->i2c_adap); |
| 2668 | err_dvb_unregister_adapter_2: |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 2669 | dvb_unregister_adapter(&av7110->dvb_adapter); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2670 | err_put_firmware_1: |
| 2671 | put_firmware(av7110); |
| 2672 | err_kfree_0: |
| 2673 | kfree(av7110); |
| 2674 | goto out; |
| 2675 | } |
| 2676 | |
| 2677 | static int av7110_detach(struct saa7146_dev* saa) |
| 2678 | { |
| 2679 | struct av7110 *av7110 = saa->ext_priv; |
| 2680 | dprintk(4, "%p\n", av7110); |
| 2681 | |
| 2682 | if (budgetpatch) { |
| 2683 | /* Disable RPS1 */ |
| 2684 | saa7146_write(saa, MC1, MASK_29); |
| 2685 | /* VSYNC LOW (inactive) */ |
| 2686 | saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); |
| 2687 | saa7146_write(saa, MC1, MASK_20); /* DMA3 off */ |
| 2688 | SAA7146_IER_DISABLE(saa, MASK_10); |
| 2689 | SAA7146_ISR_CLEAR(saa, MASK_10); |
| 2690 | msleep(50); |
| 2691 | tasklet_kill(&av7110->vpe_tasklet); |
| 2692 | saa7146_pgtable_free(saa->pci, &av7110->pt); |
| 2693 | } |
| 2694 | av7110_exit_v4l(av7110); |
| 2695 | |
| 2696 | av7110_arm_sync(av7110); |
| 2697 | |
| 2698 | tasklet_kill(&av7110->debi_tasklet); |
| 2699 | tasklet_kill(&av7110->gpio_tasklet); |
| 2700 | |
| 2701 | dvb_unregister(av7110); |
| 2702 | |
| 2703 | SAA7146_IER_DISABLE(saa, MASK_19 | MASK_03); |
| 2704 | SAA7146_ISR_CLEAR(saa, MASK_19 | MASK_03); |
| 2705 | |
| 2706 | av7110_ca_exit(av7110); |
| 2707 | av7110_av_exit(av7110); |
| 2708 | |
| 2709 | vfree(av7110->iobuf); |
| 2710 | pci_free_consistent(saa->pci, 8192, av7110->debi_virt, |
| 2711 | av7110->debi_bus); |
| 2712 | |
| 2713 | i2c_del_adapter(&av7110->i2c_adap); |
| 2714 | |
Johannes Stezenbach | fdc53a6 | 2005-05-16 21:54:39 -0700 | [diff] [blame^] | 2715 | dvb_unregister_adapter (&av7110->dvb_adapter); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2716 | |
| 2717 | av7110_num--; |
| 2718 | |
| 2719 | put_firmware(av7110); |
| 2720 | |
| 2721 | kfree(av7110); |
| 2722 | |
| 2723 | saa->ext_priv = NULL; |
| 2724 | |
| 2725 | return 0; |
| 2726 | } |
| 2727 | |
| 2728 | |
| 2729 | static void av7110_irq(struct saa7146_dev* dev, u32 *isr) |
| 2730 | { |
| 2731 | struct av7110 *av7110 = dev->ext_priv; |
| 2732 | |
| 2733 | //print_time("av7110_irq"); |
| 2734 | |
| 2735 | /* Note: Don't try to handle the DEBI error irq (MASK_18), in |
| 2736 | * intel mode the timeout is asserted all the time... |
| 2737 | */ |
| 2738 | |
| 2739 | if (*isr & MASK_19) { |
| 2740 | //printk("av7110_irq: DEBI\n"); |
| 2741 | /* Note 1: The DEBI irq is level triggered: We must enable it |
| 2742 | * only after we started a DMA xfer, and disable it here |
| 2743 | * immediately, or it will be signalled all the time while |
| 2744 | * DEBI is idle. |
| 2745 | * Note 2: You would think that an irq which is masked is |
| 2746 | * not signalled by the hardware. Not so for the SAA7146: |
| 2747 | * An irq is signalled as long as the corresponding bit |
| 2748 | * in the ISR is set, and disabling irqs just prevents the |
| 2749 | * hardware from setting the ISR bit. This means a) that we |
| 2750 | * must clear the ISR *after* disabling the irq (which is why |
| 2751 | * we must do it here even though saa7146_core did it already), |
| 2752 | * and b) that if we were to disable an edge triggered irq |
| 2753 | * (like the gpio irqs sadly are) temporarily we would likely |
| 2754 | * loose some. This sucks :-( |
| 2755 | */ |
| 2756 | SAA7146_IER_DISABLE(av7110->dev, MASK_19); |
| 2757 | SAA7146_ISR_CLEAR(av7110->dev, MASK_19); |
| 2758 | tasklet_schedule(&av7110->debi_tasklet); |
| 2759 | } |
| 2760 | |
| 2761 | if (*isr & MASK_03) { |
| 2762 | //printk("av7110_irq: GPIO\n"); |
| 2763 | tasklet_schedule(&av7110->gpio_tasklet); |
| 2764 | } |
| 2765 | |
| 2766 | if ((*isr & MASK_10) && budgetpatch) |
| 2767 | tasklet_schedule(&av7110->vpe_tasklet); |
| 2768 | } |
| 2769 | |
| 2770 | |
| 2771 | static struct saa7146_extension av7110_extension; |
| 2772 | |
| 2773 | #define MAKE_AV7110_INFO(x_var,x_name) \ |
| 2774 | static struct saa7146_pci_extension_data x_var = { \ |
| 2775 | .ext_priv = x_name, \ |
| 2776 | .ext = &av7110_extension } |
| 2777 | |
| 2778 | MAKE_AV7110_INFO(tts_1_X, "Technotrend/Hauppauge WinTV DVB-S rev1.X"); |
| 2779 | MAKE_AV7110_INFO(ttt_1_X, "Technotrend/Hauppauge WinTV DVB-T rev1.X"); |
| 2780 | MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X"); |
| 2781 | MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X"); |
| 2782 | MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X"); |
Johannes Stezenbach | 3dfaebd | 2005-05-16 21:54:19 -0700 | [diff] [blame] | 2783 | MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2784 | MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE"); |
| 2785 | MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T"); |
| 2786 | MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C"); |
| 2787 | MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6"); |
| 2788 | |
| 2789 | static struct pci_device_id pci_tbl[] = { |
Johannes Stezenbach | 3dfaebd | 2005-05-16 21:54:19 -0700 | [diff] [blame] | 2790 | MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2791 | MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000), |
| 2792 | MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001), |
| 2793 | MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002), |
| 2794 | MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2795 | MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006), |
| 2796 | MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008), |
Johannes Stezenbach | 3dfaebd | 2005-05-16 21:54:19 -0700 | [diff] [blame] | 2797 | MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a), |
| 2798 | MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e), |
| 2799 | MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2800 | |
| 2801 | /* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte |
| 2802 | /* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1 |
| 2803 | /* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v???? |
| 2804 | |
| 2805 | { |
| 2806 | .vendor = 0, |
| 2807 | } |
| 2808 | }; |
| 2809 | |
| 2810 | MODULE_DEVICE_TABLE(pci, pci_tbl); |
| 2811 | |
| 2812 | |
| 2813 | static struct saa7146_extension av7110_extension = { |
| 2814 | .name = "dvb\0", |
| 2815 | .flags = SAA7146_I2C_SHORT_DELAY, |
| 2816 | |
| 2817 | .module = THIS_MODULE, |
| 2818 | .pci_tbl = &pci_tbl[0], |
| 2819 | .attach = av7110_attach, |
| 2820 | .detach = av7110_detach, |
| 2821 | |
| 2822 | .irq_mask = MASK_19 | MASK_03 | MASK_10, |
| 2823 | .irq_func = av7110_irq, |
| 2824 | }; |
| 2825 | |
| 2826 | |
| 2827 | static int __init av7110_init(void) |
| 2828 | { |
| 2829 | int retval; |
| 2830 | retval = saa7146_register_extension(&av7110_extension); |
| 2831 | return retval; |
| 2832 | } |
| 2833 | |
| 2834 | |
| 2835 | static void __exit av7110_exit(void) |
| 2836 | { |
| 2837 | #if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE) |
| 2838 | av7110_ir_exit(); |
| 2839 | #endif |
| 2840 | saa7146_unregister_extension(&av7110_extension); |
| 2841 | } |
| 2842 | |
| 2843 | module_init(av7110_init); |
| 2844 | module_exit(av7110_exit); |
| 2845 | |
| 2846 | MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by " |
| 2847 | "Siemens, Technotrend, Hauppauge"); |
| 2848 | MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others"); |
| 2849 | MODULE_LICENSE("GPL"); |