| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "disassembler_x86.h" |
| |
| #include <iostream> |
| |
| #include "base/logging.h" |
| #include "base/stringprintf.h" |
| #include "thread.h" |
| #include <inttypes.h> |
| |
| namespace art { |
| namespace x86 { |
| |
| size_t DisassemblerX86::Dump(std::ostream& os, const uint8_t* begin) { |
| return DumpInstruction(os, begin); |
| } |
| |
| void DisassemblerX86::Dump(std::ostream& os, const uint8_t* begin, const uint8_t* end) { |
| size_t length = 0; |
| for (const uint8_t* cur = begin; cur < end; cur += length) { |
| length = DumpInstruction(os, cur); |
| } |
| } |
| |
| static const char* gReg8Names[] = { |
| "al", "cl", "dl", "bl", "ah", "ch", "dh", "bh" |
| }; |
| static const char* gExtReg8Names[] = { |
| "al", "cl", "dl", "bl", "spl", "bpl", "sil", "dil", |
| "r8l", "r9l", "r10l", "r11l", "r12l", "r13l", "r14l", "r15l" |
| }; |
| static const char* gReg16Names[] = { |
| "ax", "cx", "dx", "bx", "sp", "bp", "si", "di", |
| "r8w", "r9w", "r10w", "r11w", "r12w", "r13w", "r14w", "r15w" |
| }; |
| static const char* gReg32Names[] = { |
| "eax", "ecx", "edx", "ebx", "esp", "ebp", "esi", "edi", |
| "r8d", "r9d", "r10d", "r11d", "r12d", "r13d", "r14d", "r15d" |
| }; |
| static const char* gReg64Names[] = { |
| "rax", "rcx", "rdx", "rbx", "rsp", "rbp", "rsi", "rdi", |
| "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15" |
| }; |
| |
| // 64-bit opcode REX modifier. |
| constexpr uint8_t REX_W = 0b1000; |
| constexpr uint8_t REX_R = 0b0100; |
| constexpr uint8_t REX_X = 0b0010; |
| constexpr uint8_t REX_B = 0b0001; |
| |
| static void DumpReg0(std::ostream& os, uint8_t rex, size_t reg, |
| bool byte_operand, uint8_t size_override) { |
| DCHECK_LT(reg, (rex == 0) ? 8u : 16u); |
| bool rex_w = (rex & REX_W) != 0; |
| if (byte_operand) { |
| os << ((rex == 0) ? gReg8Names[reg] : gExtReg8Names[reg]); |
| } else if (rex_w) { |
| os << gReg64Names[reg]; |
| } else if (size_override == 0x66) { |
| os << gReg16Names[reg]; |
| } else { |
| os << gReg32Names[reg]; |
| } |
| } |
| |
| enum RegFile { GPR, MMX, SSE }; |
| |
| static void DumpAnyReg(std::ostream& os, uint8_t rex, size_t reg, |
| bool byte_operand, uint8_t size_override, RegFile reg_file) { |
| if (reg_file == GPR) { |
| DumpReg0(os, rex, reg, byte_operand, size_override); |
| } else if (reg_file == SSE) { |
| os << "xmm" << reg; |
| } else { |
| os << "mm" << reg; |
| } |
| } |
| |
| static void DumpReg(std::ostream& os, uint8_t rex, uint8_t reg, |
| bool byte_operand, uint8_t size_override, RegFile reg_file) { |
| bool rex_r = (rex & REX_R) != 0; |
| size_t reg_num = rex_r ? (reg + 8) : reg; |
| DumpAnyReg(os, rex, reg_num, byte_operand, size_override, reg_file); |
| } |
| |
| static void DumpRmReg(std::ostream& os, uint8_t rex, uint8_t reg, |
| bool byte_operand, uint8_t size_override, RegFile reg_file) { |
| bool rex_b = (rex & REX_B) != 0; |
| size_t reg_num = rex_b ? (reg + 8) : reg; |
| DumpAnyReg(os, rex, reg_num, byte_operand, size_override, reg_file); |
| } |
| |
| static void DumpAddrReg(std::ostream& os, uint8_t rex, uint8_t reg) { |
| if (rex != 0) { |
| os << gReg64Names[reg]; |
| } else { |
| os << gReg32Names[reg]; |
| } |
| } |
| |
| static void DumpBaseReg(std::ostream& os, uint8_t rex, uint8_t reg) { |
| bool rex_b = (rex & REX_B) != 0; |
| size_t reg_num = rex_b ? (reg + 8) : reg; |
| DumpAddrReg(os, rex, reg_num); |
| } |
| |
| static void DumpIndexReg(std::ostream& os, uint8_t rex, uint8_t reg) { |
| bool rex_x = (rex & REX_X) != 0; |
| uint8_t reg_num = rex_x ? (reg + 8) : reg; |
| DumpAddrReg(os, rex, reg_num); |
| } |
| |
| static void DumpOpcodeReg(std::ostream& os, uint8_t rex, uint8_t reg, |
| bool byte_operand, uint8_t size_override) { |
| bool rex_b = (rex & REX_B) != 0; |
| size_t reg_num = rex_b ? (reg + 8) : reg; |
| DumpReg0(os, rex, reg_num, byte_operand, size_override); |
| } |
| |
| enum SegmentPrefix { |
| kCs = 0x2e, |
| kSs = 0x36, |
| kDs = 0x3e, |
| kEs = 0x26, |
| kFs = 0x64, |
| kGs = 0x65, |
| }; |
| |
| static void DumpSegmentOverride(std::ostream& os, uint8_t segment_prefix) { |
| switch (segment_prefix) { |
| case kCs: os << "cs:"; break; |
| case kSs: os << "ss:"; break; |
| case kDs: os << "ds:"; break; |
| case kEs: os << "es:"; break; |
| case kFs: os << "fs:"; break; |
| case kGs: os << "gs:"; break; |
| default: break; |
| } |
| } |
| |
| size_t DisassemblerX86::DumpInstruction(std::ostream& os, const uint8_t* instr) { |
| const uint8_t* begin_instr = instr; |
| bool have_prefixes = true; |
| uint8_t prefix[4] = {0, 0, 0, 0}; |
| const char** modrm_opcodes = NULL; |
| do { |
| switch (*instr) { |
| // Group 1 - lock and repeat prefixes: |
| case 0xF0: |
| case 0xF2: |
| case 0xF3: |
| prefix[0] = *instr; |
| break; |
| // Group 2 - segment override prefixes: |
| case kCs: |
| case kSs: |
| case kDs: |
| case kEs: |
| case kFs: |
| case kGs: |
| prefix[1] = *instr; |
| break; |
| // Group 3 - operand size override: |
| case 0x66: |
| prefix[2] = *instr; |
| break; |
| // Group 4 - address size override: |
| case 0x67: |
| prefix[3] = *instr; |
| break; |
| default: |
| have_prefixes = false; |
| break; |
| } |
| if (have_prefixes) { |
| instr++; |
| } |
| } while (have_prefixes); |
| uint8_t rex = (supports_rex_ && (*instr >= 0x40) && (*instr <= 0x4F)) ? *instr : 0; |
| if (rex != 0) { |
| instr++; |
| } |
| bool has_modrm = false; |
| bool reg_is_opcode = false; |
| size_t immediate_bytes = 0; |
| size_t branch_bytes = 0; |
| std::ostringstream opcode; |
| bool store = false; // stores to memory (ie rm is on the left) |
| bool load = false; // loads from memory (ie rm is on the right) |
| bool byte_operand = false; // true when the opcode is dealing with byte operands |
| bool byte_second_operand = false; // true when the source operand is a byte register but the target register isn't (ie movsxb/movzxb). |
| bool target_specific = false; // register name depends on target (64 vs 32 bits). |
| bool ax = false; // implicit use of ax |
| bool cx = false; // implicit use of cx |
| bool reg_in_opcode = false; // low 3-bits of opcode encode register parameter |
| bool no_ops = false; |
| RegFile src_reg_file = GPR; |
| RegFile dst_reg_file = GPR; |
| switch (*instr) { |
| #define DISASSEMBLER_ENTRY(opname, \ |
| rm8_r8, rm32_r32, \ |
| r8_rm8, r32_rm32, \ |
| ax8_i8, ax32_i32) \ |
| case rm8_r8: opcode << #opname; store = true; has_modrm = true; byte_operand = true; break; \ |
| case rm32_r32: opcode << #opname; store = true; has_modrm = true; break; \ |
| case r8_rm8: opcode << #opname; load = true; has_modrm = true; byte_operand = true; break; \ |
| case r32_rm32: opcode << #opname; load = true; has_modrm = true; break; \ |
| case ax8_i8: opcode << #opname; ax = true; immediate_bytes = 1; byte_operand = true; break; \ |
| case ax32_i32: opcode << #opname; ax = true; immediate_bytes = 4; break; |
| |
| DISASSEMBLER_ENTRY(add, |
| 0x00 /* RegMem8/Reg8 */, 0x01 /* RegMem32/Reg32 */, |
| 0x02 /* Reg8/RegMem8 */, 0x03 /* Reg32/RegMem32 */, |
| 0x04 /* Rax8/imm8 opcode */, 0x05 /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(or, |
| 0x08 /* RegMem8/Reg8 */, 0x09 /* RegMem32/Reg32 */, |
| 0x0A /* Reg8/RegMem8 */, 0x0B /* Reg32/RegMem32 */, |
| 0x0C /* Rax8/imm8 opcode */, 0x0D /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(adc, |
| 0x10 /* RegMem8/Reg8 */, 0x11 /* RegMem32/Reg32 */, |
| 0x12 /* Reg8/RegMem8 */, 0x13 /* Reg32/RegMem32 */, |
| 0x14 /* Rax8/imm8 opcode */, 0x15 /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(sbb, |
| 0x18 /* RegMem8/Reg8 */, 0x19 /* RegMem32/Reg32 */, |
| 0x1A /* Reg8/RegMem8 */, 0x1B /* Reg32/RegMem32 */, |
| 0x1C /* Rax8/imm8 opcode */, 0x1D /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(and, |
| 0x20 /* RegMem8/Reg8 */, 0x21 /* RegMem32/Reg32 */, |
| 0x22 /* Reg8/RegMem8 */, 0x23 /* Reg32/RegMem32 */, |
| 0x24 /* Rax8/imm8 opcode */, 0x25 /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(sub, |
| 0x28 /* RegMem8/Reg8 */, 0x29 /* RegMem32/Reg32 */, |
| 0x2A /* Reg8/RegMem8 */, 0x2B /* Reg32/RegMem32 */, |
| 0x2C /* Rax8/imm8 opcode */, 0x2D /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(xor, |
| 0x30 /* RegMem8/Reg8 */, 0x31 /* RegMem32/Reg32 */, |
| 0x32 /* Reg8/RegMem8 */, 0x33 /* Reg32/RegMem32 */, |
| 0x34 /* Rax8/imm8 opcode */, 0x35 /* Rax32/imm32 */) |
| DISASSEMBLER_ENTRY(cmp, |
| 0x38 /* RegMem8/Reg8 */, 0x39 /* RegMem32/Reg32 */, |
| 0x3A /* Reg8/RegMem8 */, 0x3B /* Reg32/RegMem32 */, |
| 0x3C /* Rax8/imm8 opcode */, 0x3D /* Rax32/imm32 */) |
| |
| #undef DISASSEMBLER_ENTRY |
| case 0x50: case 0x51: case 0x52: case 0x53: case 0x54: case 0x55: case 0x56: case 0x57: |
| opcode << "push"; |
| reg_in_opcode = true; |
| target_specific = true; |
| break; |
| case 0x58: case 0x59: case 0x5A: case 0x5B: case 0x5C: case 0x5D: case 0x5E: case 0x5F: |
| opcode << "pop"; |
| reg_in_opcode = true; |
| target_specific = true; |
| break; |
| case 0x63: |
| if ((rex & REX_W) != 0) { |
| opcode << "movsxd"; |
| has_modrm = true; |
| load = true; |
| } else { |
| // In 32-bit mode (!supports_rex_) this is ARPL, with no REX prefix the functionality is the |
| // same as 'mov' but the use of the instruction is discouraged. |
| opcode << StringPrintf("unknown opcode '%02X'", *instr); |
| } |
| break; |
| case 0x68: opcode << "push"; immediate_bytes = 4; break; |
| case 0x69: opcode << "imul"; load = true; has_modrm = true; immediate_bytes = 4; break; |
| case 0x6A: opcode << "push"; immediate_bytes = 1; break; |
| case 0x6B: opcode << "imul"; load = true; has_modrm = true; immediate_bytes = 1; break; |
| case 0x70: case 0x71: case 0x72: case 0x73: case 0x74: case 0x75: case 0x76: case 0x77: |
| case 0x78: case 0x79: case 0x7A: case 0x7B: case 0x7C: case 0x7D: case 0x7E: case 0x7F: |
| static const char* condition_codes[] = |
| {"o", "no", "b/nae/c", "nb/ae/nc", "z/eq", "nz/ne", "be/na", "nbe/a", |
| "s", "ns", "p/pe", "np/po", "l/nge", "nl/ge", "le/ng", "nle/g" |
| }; |
| opcode << "j" << condition_codes[*instr & 0xF]; |
| branch_bytes = 1; |
| break; |
| case 0x86: case 0x87: |
| opcode << "xchg"; |
| store = true; |
| has_modrm = true; |
| byte_operand = (*instr == 0x86); |
| break; |
| case 0x88: opcode << "mov"; store = true; has_modrm = true; byte_operand = true; break; |
| case 0x89: opcode << "mov"; store = true; has_modrm = true; break; |
| case 0x8A: opcode << "mov"; load = true; has_modrm = true; byte_operand = true; break; |
| case 0x8B: opcode << "mov"; load = true; has_modrm = true; break; |
| |
| case 0x0F: // 2 byte extended opcode |
| instr++; |
| switch (*instr) { |
| case 0x10: case 0x11: |
| if (prefix[0] == 0xF2) { |
| opcode << "movsd"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "movss"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[2] == 0x66) { |
| opcode << "movupd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "movups"; |
| } |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| load = *instr == 0x10; |
| store = !load; |
| break; |
| case 0x12: case 0x13: |
| if (prefix[2] == 0x66) { |
| opcode << "movlpd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0) { |
| opcode << "movlps"; |
| } |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| load = *instr == 0x12; |
| store = !load; |
| break; |
| case 0x16: case 0x17: |
| if (prefix[2] == 0x66) { |
| opcode << "movhpd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0) { |
| opcode << "movhps"; |
| } |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| load = *instr == 0x16; |
| store = !load; |
| break; |
| case 0x28: case 0x29: |
| if (prefix[2] == 0x66) { |
| opcode << "movapd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0) { |
| opcode << "movaps"; |
| } |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| load = *instr == 0x28; |
| store = !load; |
| break; |
| case 0x2A: |
| if (prefix[2] == 0x66) { |
| opcode << "cvtpi2pd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "cvtsi2sd"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "cvtsi2ss"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "cvtpi2ps"; |
| } |
| load = true; |
| has_modrm = true; |
| dst_reg_file = SSE; |
| break; |
| case 0x2C: |
| if (prefix[2] == 0x66) { |
| opcode << "cvttpd2pi"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "cvttsd2si"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "cvttss2si"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "cvttps2pi"; |
| } |
| load = true; |
| has_modrm = true; |
| src_reg_file = SSE; |
| break; |
| case 0x2D: |
| if (prefix[2] == 0x66) { |
| opcode << "cvtpd2pi"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "cvtsd2si"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "cvtss2si"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "cvtps2pi"; |
| } |
| load = true; |
| has_modrm = true; |
| src_reg_file = SSE; |
| break; |
| case 0x2E: |
| opcode << "u"; |
| // FALLTHROUGH |
| case 0x2F: |
| if (prefix[2] == 0x66) { |
| opcode << "comisd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "comiss"; |
| } |
| has_modrm = true; |
| load = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| case 0x38: // 3 byte extended opcode |
| instr++; |
| if (prefix[2] == 0x66) { |
| switch (*instr) { |
| case 0x01: |
| opcode << "phaddw"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| case 0x02: |
| opcode << "phaddd"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| case 0x40: |
| opcode << "pmulld"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| default: |
| opcode << StringPrintf("unknown opcode '0F 38 %02X'", *instr); |
| } |
| } else { |
| opcode << StringPrintf("unknown opcode '0F 38 %02X'", *instr); |
| } |
| break; |
| case 0x3A: // 3 byte extended opcode |
| instr++; |
| if (prefix[2] == 0x66) { |
| switch (*instr) { |
| case 0x14: |
| opcode << "pextrb"; |
| prefix[2] = 0; |
| has_modrm = true; |
| store = true; |
| src_reg_file = SSE; |
| immediate_bytes = 1; |
| break; |
| case 0x16: |
| opcode << "pextrd"; |
| prefix[2] = 0; |
| has_modrm = true; |
| store = true; |
| src_reg_file = SSE; |
| immediate_bytes = 1; |
| break; |
| default: |
| opcode << StringPrintf("unknown opcode '0F 3A %02X'", *instr); |
| } |
| } else { |
| opcode << StringPrintf("unknown opcode '0F 3A %02X'", *instr); |
| } |
| break; |
| case 0x40: case 0x41: case 0x42: case 0x43: case 0x44: case 0x45: case 0x46: case 0x47: |
| case 0x48: case 0x49: case 0x4A: case 0x4B: case 0x4C: case 0x4D: case 0x4E: case 0x4F: |
| opcode << "cmov" << condition_codes[*instr & 0xF]; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0x50: case 0x51: case 0x52: case 0x53: case 0x54: case 0x55: case 0x56: case 0x57: |
| case 0x58: case 0x59: case 0x5C: case 0x5D: case 0x5E: case 0x5F: { |
| switch (*instr) { |
| case 0x50: opcode << "movmsk"; break; |
| case 0x51: opcode << "sqrt"; break; |
| case 0x52: opcode << "rsqrt"; break; |
| case 0x53: opcode << "rcp"; break; |
| case 0x54: opcode << "and"; break; |
| case 0x55: opcode << "andn"; break; |
| case 0x56: opcode << "or"; break; |
| case 0x57: opcode << "xor"; break; |
| case 0x58: opcode << "add"; break; |
| case 0x59: opcode << "mul"; break; |
| case 0x5C: opcode << "sub"; break; |
| case 0x5D: opcode << "min"; break; |
| case 0x5E: opcode << "div"; break; |
| case 0x5F: opcode << "max"; break; |
| default: LOG(FATAL) << "Unreachable"; |
| } |
| if (prefix[2] == 0x66) { |
| opcode << "pd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "sd"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "ss"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "ps"; |
| } |
| load = true; |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| } |
| case 0x5A: |
| if (prefix[2] == 0x66) { |
| opcode << "cvtpd2ps"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "cvtsd2ss"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| opcode << "cvtss2sd"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "cvtps2pd"; |
| } |
| load = true; |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| case 0x5B: |
| if (prefix[2] == 0x66) { |
| opcode << "cvtps2dq"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF2) { |
| opcode << "bad opcode F2 0F 5B"; |
| } else if (prefix[0] == 0xF3) { |
| opcode << "cvttps2dq"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << "cvtdq2ps"; |
| } |
| load = true; |
| has_modrm = true; |
| src_reg_file = dst_reg_file = SSE; |
| break; |
| case 0x60: case 0x61: case 0x62: case 0x6C: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; // Clear prefix now. It has served its purpose as part of the opcode. |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| switch (*instr) { |
| case 0x60: opcode << "punpcklbw"; break; |
| case 0x61: opcode << "punpcklwd"; break; |
| case 0x62: opcode << "punpckldq"; break; |
| case 0x6c: opcode << "punpcklqdq"; break; |
| } |
| load = true; |
| has_modrm = true; |
| break; |
| case 0x6E: |
| if (prefix[2] == 0x66) { |
| dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| dst_reg_file = MMX; |
| } |
| opcode << "movd"; |
| load = true; |
| has_modrm = true; |
| break; |
| case 0x6F: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| opcode << "movdqa"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[0] == 0xF3) { |
| src_reg_file = dst_reg_file = SSE; |
| opcode << "movdqu"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| dst_reg_file = MMX; |
| opcode << "movq"; |
| } |
| load = true; |
| has_modrm = true; |
| break; |
| case 0x70: |
| if (prefix[2] == 0x66) { |
| opcode << "pshufd"; |
| prefix[2] = 0; |
| has_modrm = true; |
| store = true; |
| src_reg_file = dst_reg_file = SSE; |
| immediate_bytes = 1; |
| } else if (prefix[0] == 0xF2) { |
| opcode << "pshuflw"; |
| prefix[0] = 0; |
| has_modrm = true; |
| store = true; |
| src_reg_file = dst_reg_file = SSE; |
| immediate_bytes = 1; |
| } else { |
| opcode << StringPrintf("unknown opcode '0F %02X'", *instr); |
| } |
| break; |
| case 0x71: |
| if (prefix[2] == 0x66) { |
| dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| dst_reg_file = MMX; |
| } |
| static const char* x71_opcodes[] = {"unknown-71", "unknown-71", "psrlw", "unknown-71", "psraw", "unknown-71", "psllw", "unknown-71"}; |
| modrm_opcodes = x71_opcodes; |
| reg_is_opcode = true; |
| has_modrm = true; |
| store = true; |
| immediate_bytes = 1; |
| break; |
| case 0x72: |
| if (prefix[2] == 0x66) { |
| dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| dst_reg_file = MMX; |
| } |
| static const char* x72_opcodes[] = {"unknown-72", "unknown-72", "psrld", "unknown-72", "psrad", "unknown-72", "pslld", "unknown-72"}; |
| modrm_opcodes = x72_opcodes; |
| reg_is_opcode = true; |
| has_modrm = true; |
| store = true; |
| immediate_bytes = 1; |
| break; |
| case 0x73: |
| if (prefix[2] == 0x66) { |
| dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| dst_reg_file = MMX; |
| } |
| static const char* x73_opcodes[] = {"unknown-73", "unknown-73", "psrlq", "psrldq", "unknown-73", "unknown-73", "psllq", "unknown-73"}; |
| modrm_opcodes = x73_opcodes; |
| reg_is_opcode = true; |
| has_modrm = true; |
| store = true; |
| immediate_bytes = 1; |
| break; |
| case 0x7C: |
| if (prefix[0] == 0xF2) { |
| opcode << "haddps"; |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else if (prefix[2] == 0x66) { |
| opcode << "haddpd"; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| opcode << StringPrintf("unknown opcode '0F %02X'", *instr); |
| break; |
| } |
| src_reg_file = dst_reg_file = SSE; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0x7E: |
| if (prefix[2] == 0x66) { |
| src_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| src_reg_file = MMX; |
| } |
| opcode << "movd"; |
| has_modrm = true; |
| store = true; |
| break; |
| case 0x80: case 0x81: case 0x82: case 0x83: case 0x84: case 0x85: case 0x86: case 0x87: |
| case 0x88: case 0x89: case 0x8A: case 0x8B: case 0x8C: case 0x8D: case 0x8E: case 0x8F: |
| opcode << "j" << condition_codes[*instr & 0xF]; |
| branch_bytes = 4; |
| break; |
| case 0x90: case 0x91: case 0x92: case 0x93: case 0x94: case 0x95: case 0x96: case 0x97: |
| case 0x98: case 0x99: case 0x9A: case 0x9B: case 0x9C: case 0x9D: case 0x9E: case 0x9F: |
| opcode << "set" << condition_codes[*instr & 0xF]; |
| modrm_opcodes = NULL; |
| reg_is_opcode = true; |
| has_modrm = true; |
| store = true; |
| break; |
| case 0xA4: |
| opcode << "shld"; |
| has_modrm = true; |
| load = true; |
| immediate_bytes = 1; |
| break; |
| case 0xA5: |
| opcode << "shld"; |
| has_modrm = true; |
| load = true; |
| cx = true; |
| break; |
| case 0xAC: |
| opcode << "shrd"; |
| has_modrm = true; |
| load = true; |
| immediate_bytes = 1; |
| break; |
| case 0xAD: |
| opcode << "shrd"; |
| has_modrm = true; |
| load = true; |
| cx = true; |
| break; |
| case 0xAE: |
| if (prefix[0] == 0xF3) { |
| prefix[0] = 0; // clear prefix now it's served its purpose as part of the opcode |
| static const char* xAE_opcodes[] = {"rdfsbase", "rdgsbase", "wrfsbase", "wrgsbase", "unknown-AE", "unknown-AE", "unknown-AE", "unknown-AE"}; |
| modrm_opcodes = xAE_opcodes; |
| reg_is_opcode = true; |
| has_modrm = true; |
| uint8_t reg_or_opcode = (instr[1] >> 3) & 7; |
| switch (reg_or_opcode) { |
| case 0: |
| prefix[1] = kFs; |
| load = true; |
| break; |
| case 1: |
| prefix[1] = kGs; |
| load = true; |
| break; |
| case 2: |
| prefix[1] = kFs; |
| store = true; |
| break; |
| case 3: |
| prefix[1] = kGs; |
| store = true; |
| break; |
| default: |
| load = true; |
| break; |
| } |
| } else { |
| static const char* xAE_opcodes[] = {"unknown-AE", "unknown-AE", "unknown-AE", "unknown-AE", "unknown-AE", "lfence", "mfence", "sfence"}; |
| modrm_opcodes = xAE_opcodes; |
| reg_is_opcode = true; |
| has_modrm = true; |
| load = true; |
| no_ops = true; |
| } |
| break; |
| case 0xAF: opcode << "imul"; has_modrm = true; load = true; break; |
| case 0xB1: opcode << "cmpxchg"; has_modrm = true; store = true; break; |
| case 0xB6: opcode << "movzxb"; has_modrm = true; load = true; byte_second_operand = true; break; |
| case 0xB7: opcode << "movzxw"; has_modrm = true; load = true; break; |
| case 0xBE: opcode << "movsxb"; has_modrm = true; load = true; byte_second_operand = true; rex |= (rex == 0 ? 0 : 0b1000); break; |
| case 0xBF: opcode << "movsxw"; has_modrm = true; load = true; break; |
| case 0xC3: opcode << "movnti"; store = true; has_modrm = true; break; |
| case 0xC5: |
| if (prefix[2] == 0x66) { |
| opcode << "pextrw"; |
| prefix[2] = 0; |
| has_modrm = true; |
| store = true; |
| src_reg_file = SSE; |
| immediate_bytes = 1; |
| } else { |
| opcode << StringPrintf("unknown opcode '0F %02X'", *instr); |
| } |
| break; |
| case 0xC6: |
| if (prefix[2] == 0x66) { |
| opcode << "shufpd"; |
| prefix[2] = 0; |
| } else { |
| opcode << "shufps"; |
| } |
| has_modrm = true; |
| store = true; |
| src_reg_file = dst_reg_file = SSE; |
| immediate_bytes = 1; |
| break; |
| case 0xC7: |
| static const char* x0FxC7_opcodes[] = { "unknown-0f-c7", "cmpxchg8b", "unknown-0f-c7", "unknown-0f-c7", "unknown-0f-c7", "unknown-0f-c7", "unknown-0f-c7", "unknown-0f-c7" }; |
| modrm_opcodes = x0FxC7_opcodes; |
| has_modrm = true; |
| reg_is_opcode = true; |
| store = true; |
| break; |
| case 0xC8: case 0xC9: case 0xCA: case 0xCB: case 0xCC: case 0xCD: case 0xCE: case 0xCF: |
| opcode << "bswap"; |
| reg_in_opcode = true; |
| break; |
| case 0xD4: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| opcode << "paddq"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0xDB: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| opcode << "pand"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0xD5: |
| if (prefix[2] == 0x66) { |
| opcode << "pmullw"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| src_reg_file = dst_reg_file = SSE; |
| } else { |
| opcode << StringPrintf("unknown opcode '0F %02X'", *instr); |
| } |
| break; |
| case 0xEB: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| opcode << "por"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0xEF: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| opcode << "pxor"; |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0xF4: |
| case 0xF6: |
| case 0xF8: |
| case 0xF9: |
| case 0xFA: |
| case 0xFB: |
| case 0xFC: |
| case 0xFD: |
| case 0xFE: |
| if (prefix[2] == 0x66) { |
| src_reg_file = dst_reg_file = SSE; |
| prefix[2] = 0; // clear prefix now it's served its purpose as part of the opcode |
| } else { |
| src_reg_file = dst_reg_file = MMX; |
| } |
| switch (*instr) { |
| case 0xF4: opcode << "pmuludq"; break; |
| case 0xF6: opcode << "psadbw"; break; |
| case 0xF8: opcode << "psubb"; break; |
| case 0xF9: opcode << "psubw"; break; |
| case 0xFA: opcode << "psubd"; break; |
| case 0xFB: opcode << "psubq"; break; |
| case 0xFC: opcode << "paddb"; break; |
| case 0xFD: opcode << "paddw"; break; |
| case 0xFE: opcode << "paddd"; break; |
| } |
| prefix[2] = 0; |
| has_modrm = true; |
| load = true; |
| break; |
| default: |
| opcode << StringPrintf("unknown opcode '0F %02X'", *instr); |
| break; |
| } |
| break; |
| case 0x80: case 0x81: case 0x82: case 0x83: |
| static const char* x80_opcodes[] = {"add", "or", "adc", "sbb", "and", "sub", "xor", "cmp"}; |
| modrm_opcodes = x80_opcodes; |
| has_modrm = true; |
| reg_is_opcode = true; |
| store = true; |
| byte_operand = (*instr & 1) == 0; |
| immediate_bytes = *instr == 0x81 ? 4 : 1; |
| break; |
| case 0x84: case 0x85: |
| opcode << "test"; |
| has_modrm = true; |
| load = true; |
| byte_operand = (*instr & 1) == 0; |
| break; |
| case 0x8D: |
| opcode << "lea"; |
| has_modrm = true; |
| load = true; |
| break; |
| case 0x8F: |
| opcode << "pop"; |
| has_modrm = true; |
| reg_is_opcode = true; |
| store = true; |
| break; |
| case 0x99: |
| opcode << "cdq"; |
| break; |
| case 0x9B: |
| if (instr[1] == 0xDF && instr[2] == 0xE0) { |
| opcode << "fstsw\tax"; |
| instr += 2; |
| } else { |
| opcode << StringPrintf("unknown opcode '%02X'", *instr); |
| } |
| break; |
| case 0xAF: |
| opcode << (prefix[2] == 0x66 ? "scasw" : "scasl"); |
| break; |
| case 0xB0: case 0xB1: case 0xB2: case 0xB3: case 0xB4: case 0xB5: case 0xB6: case 0xB7: |
| opcode << "mov"; |
| immediate_bytes = 1; |
| byte_operand = true; |
| reg_in_opcode = true; |
| byte_operand = true; |
| break; |
| case 0xB8: case 0xB9: case 0xBA: case 0xBB: case 0xBC: case 0xBD: case 0xBE: case 0xBF: |
| if ((rex & REX_W) != 0) { |
| opcode << "movabsq"; |
| immediate_bytes = 8; |
| reg_in_opcode = true; |
| break; |
| } |
| opcode << "mov"; |
| immediate_bytes = 4; |
| reg_in_opcode = true; |
| break; |
| case 0xC0: case 0xC1: |
| case 0xD0: case 0xD1: case 0xD2: case 0xD3: |
| static const char* shift_opcodes[] = |
| {"rol", "ror", "rcl", "rcr", "shl", "shr", "unknown-shift", "sar"}; |
| modrm_opcodes = shift_opcodes; |
| has_modrm = true; |
| reg_is_opcode = true; |
| store = true; |
| immediate_bytes = ((*instr & 0xf0) == 0xc0) ? 1 : 0; |
| cx = (*instr == 0xD2) || (*instr == 0xD3); |
| byte_operand = (*instr == 0xC0); |
| break; |
| case 0xC3: opcode << "ret"; break; |
| case 0xC6: |
| static const char* c6_opcodes[] = {"mov", "unknown-c6", "unknown-c6", "unknown-c6", "unknown-c6", "unknown-c6", "unknown-c6", "unknown-c6"}; |
| modrm_opcodes = c6_opcodes; |
| store = true; |
| immediate_bytes = 1; |
| has_modrm = true; |
| reg_is_opcode = true; |
| byte_operand = true; |
| break; |
| case 0xC7: |
| static const char* c7_opcodes[] = {"mov", "unknown-c7", "unknown-c7", "unknown-c7", "unknown-c7", "unknown-c7", "unknown-c7", "unknown-c7"}; |
| modrm_opcodes = c7_opcodes; |
| store = true; |
| immediate_bytes = 4; |
| has_modrm = true; |
| reg_is_opcode = true; |
| break; |
| case 0xCC: opcode << "int 3"; break; |
| case 0xD9: |
| if (instr[1] == 0xF8) { |
| opcode << "fprem"; |
| instr++; |
| } else { |
| static const char* d9_opcodes[] = {"flds", "unknown-d9", "fsts", "fstps", "fldenv", "fldcw", |
| "fnstenv", "fnstcw"}; |
| modrm_opcodes = d9_opcodes; |
| store = true; |
| has_modrm = true; |
| reg_is_opcode = true; |
| } |
| break; |
| case 0xDA: |
| if (instr[1] == 0xE9) { |
| opcode << "fucompp"; |
| instr++; |
| } else { |
| opcode << StringPrintf("unknown opcode '%02X'", *instr); |
| } |
| break; |
| case 0xDB: |
| static const char* db_opcodes[] = {"fildl", "unknown-db", "unknown-db", "unknown-db", "unknown-db", "unknown-db", "unknown-db", "unknown-db"}; |
| modrm_opcodes = db_opcodes; |
| load = true; |
| has_modrm = true; |
| reg_is_opcode = true; |
| break; |
| case 0xDD: |
| static const char* dd_opcodes[] = {"fldl", "fisttp", "fstl", "fstpl", "frstor", "unknown-dd", "fnsave", "fnstsw"}; |
| modrm_opcodes = dd_opcodes; |
| store = true; |
| has_modrm = true; |
| reg_is_opcode = true; |
| break; |
| case 0xDF: |
| static const char* df_opcodes[] = {"fild", "unknown-df", "unknown-df", "unknown-df", "unknown-df", "fildll", "unknown-df", "unknown-df"}; |
| modrm_opcodes = df_opcodes; |
| load = true; |
| has_modrm = true; |
| reg_is_opcode = true; |
| break; |
| case 0xE3: opcode << "jecxz"; branch_bytes = 1; break; |
| case 0xE8: opcode << "call"; branch_bytes = 4; break; |
| case 0xE9: opcode << "jmp"; branch_bytes = 4; break; |
| case 0xEB: opcode << "jmp"; branch_bytes = 1; break; |
| case 0xF5: opcode << "cmc"; break; |
| case 0xF6: case 0xF7: |
| static const char* f7_opcodes[] = {"test", "unknown-f7", "not", "neg", "mul edx:eax, eax *", "imul edx:eax, eax *", "div edx:eax, edx:eax /", "idiv edx:eax, edx:eax /"}; |
| modrm_opcodes = f7_opcodes; |
| has_modrm = true; |
| reg_is_opcode = true; |
| store = true; |
| immediate_bytes = ((instr[1] & 0x38) == 0) ? 1 : 0; |
| break; |
| case 0xFF: |
| { |
| static const char* ff_opcodes[] = {"inc", "dec", "call", "call", "jmp", "jmp", "push", "unknown-ff"}; |
| modrm_opcodes = ff_opcodes; |
| has_modrm = true; |
| reg_is_opcode = true; |
| load = true; |
| const uint8_t opcode_digit = (instr[1] >> 3) & 7; |
| // 'call', 'jmp' and 'push' are target specific instructions |
| if (opcode_digit == 2 || opcode_digit == 4 || opcode_digit == 6) { |
| target_specific = true; |
| } |
| } |
| break; |
| default: |
| opcode << StringPrintf("unknown opcode '%02X'", *instr); |
| break; |
| } |
| std::ostringstream args; |
| // We force the REX prefix to be available for 64-bit target |
| // in order to dump addr (base/index) registers correctly. |
| uint8_t rex64 = supports_rex_ ? (rex | 0x40) : rex; |
| // REX.W should be forced for 64-target and target-specific instructions (i.e., push or pop). |
| uint8_t rex_w = (supports_rex_ && target_specific) ? (rex | 0x48) : rex; |
| if (reg_in_opcode) { |
| DCHECK(!has_modrm); |
| DumpOpcodeReg(args, rex_w, *instr & 0x7, byte_operand, prefix[2]); |
| } |
| instr++; |
| uint32_t address_bits = 0; |
| if (has_modrm) { |
| uint8_t modrm = *instr; |
| instr++; |
| uint8_t mod = modrm >> 6; |
| uint8_t reg_or_opcode = (modrm >> 3) & 7; |
| uint8_t rm = modrm & 7; |
| std::ostringstream address; |
| if (mod == 0 && rm == 5) { |
| if (!supports_rex_) { // Absolute address. |
| address_bits = *reinterpret_cast<const uint32_t*>(instr); |
| address << StringPrintf("[0x%x]", address_bits); |
| } else { // 64-bit RIP relative addressing. |
| address << StringPrintf("[RIP + 0x%x]", *reinterpret_cast<const uint32_t*>(instr)); |
| } |
| instr += 4; |
| } else if (rm == 4 && mod != 3) { // SIB |
| uint8_t sib = *instr; |
| instr++; |
| uint8_t scale = (sib >> 6) & 3; |
| uint8_t index = (sib >> 3) & 7; |
| uint8_t base = sib & 7; |
| address << "["; |
| if (base != 5 || mod != 0) { |
| DumpBaseReg(address, rex64, base); |
| if (index != 4) { |
| address << " + "; |
| } |
| } |
| if (index != 4) { |
| DumpIndexReg(address, rex64, index); |
| if (scale != 0) { |
| address << StringPrintf(" * %d", 1 << scale); |
| } |
| } |
| if (mod == 0) { |
| if (base == 5) { |
| if (index != 4) { |
| address << StringPrintf(" + %d", *reinterpret_cast<const int32_t*>(instr)); |
| } else { |
| // 64-bit low 32-bit absolute address, redundant absolute address encoding on 32-bit. |
| address_bits = *reinterpret_cast<const uint32_t*>(instr); |
| address << StringPrintf("%d", address_bits); |
| } |
| instr += 4; |
| } |
| } else if (mod == 1) { |
| address << StringPrintf(" + %d", *reinterpret_cast<const int8_t*>(instr)); |
| instr++; |
| } else if (mod == 2) { |
| address << StringPrintf(" + %d", *reinterpret_cast<const int32_t*>(instr)); |
| instr += 4; |
| } |
| address << "]"; |
| } else { |
| if (mod == 3) { |
| if (!no_ops) { |
| DumpRmReg(address, rex_w, rm, byte_operand || byte_second_operand, |
| prefix[2], load ? src_reg_file : dst_reg_file); |
| } |
| } else { |
| address << "["; |
| DumpBaseReg(address, rex64, rm); |
| if (mod == 1) { |
| address << StringPrintf(" + %d", *reinterpret_cast<const int8_t*>(instr)); |
| instr++; |
| } else if (mod == 2) { |
| address << StringPrintf(" + %d", *reinterpret_cast<const int32_t*>(instr)); |
| instr += 4; |
| } |
| address << "]"; |
| } |
| } |
| |
| if (reg_is_opcode && modrm_opcodes != NULL) { |
| opcode << modrm_opcodes[reg_or_opcode]; |
| } |
| |
| // Add opcode suffixes to indicate size. |
| if (byte_operand) { |
| opcode << 'b'; |
| } else if ((rex & REX_W) != 0) { |
| opcode << 'q'; |
| } else if (prefix[2] == 0x66) { |
| opcode << 'w'; |
| } |
| |
| if (load) { |
| if (!reg_is_opcode) { |
| DumpReg(args, rex, reg_or_opcode, byte_operand, prefix[2], dst_reg_file); |
| args << ", "; |
| } |
| DumpSegmentOverride(args, prefix[1]); |
| args << address.str(); |
| } else { |
| DCHECK(store); |
| DumpSegmentOverride(args, prefix[1]); |
| args << address.str(); |
| if (!reg_is_opcode) { |
| args << ", "; |
| DumpReg(args, rex, reg_or_opcode, byte_operand, prefix[2], src_reg_file); |
| } |
| } |
| } |
| if (ax) { |
| // If this opcode implicitly uses ax, ax is always the first arg. |
| DumpReg(args, rex, 0 /* EAX */, byte_operand, prefix[2], GPR); |
| } |
| if (cx) { |
| args << ", "; |
| DumpReg(args, rex, 1 /* ECX */, true, prefix[2], GPR); |
| } |
| if (immediate_bytes > 0) { |
| if (has_modrm || reg_in_opcode || ax || cx) { |
| args << ", "; |
| } |
| if (immediate_bytes == 1) { |
| args << StringPrintf("%d", *reinterpret_cast<const int8_t*>(instr)); |
| instr++; |
| } else if (immediate_bytes == 4) { |
| if (prefix[2] == 0x66) { // Operand size override from 32-bit to 16-bit. |
| args << StringPrintf("%d", *reinterpret_cast<const int16_t*>(instr)); |
| instr += 2; |
| } else { |
| args << StringPrintf("%d", *reinterpret_cast<const int32_t*>(instr)); |
| instr += 4; |
| } |
| } else { |
| CHECK_EQ(immediate_bytes, 8u); |
| args << StringPrintf("%" PRId64, *reinterpret_cast<const int64_t*>(instr)); |
| instr += 8; |
| } |
| } else if (branch_bytes > 0) { |
| DCHECK(!has_modrm); |
| int32_t displacement; |
| if (branch_bytes == 1) { |
| displacement = *reinterpret_cast<const int8_t*>(instr); |
| instr++; |
| } else { |
| CHECK_EQ(branch_bytes, 4u); |
| displacement = *reinterpret_cast<const int32_t*>(instr); |
| instr += 4; |
| } |
| args << StringPrintf("%+d (%p)", displacement, instr + displacement); |
| } |
| if (prefix[1] == kFs && !supports_rex_) { |
| args << " ; "; |
| Thread::DumpThreadOffset<4>(args, address_bits); |
| } |
| if (prefix[1] == kGs && supports_rex_) { |
| args << " ; "; |
| Thread::DumpThreadOffset<8>(args, address_bits); |
| } |
| std::stringstream hex; |
| for (size_t i = 0; begin_instr + i < instr; ++i) { |
| hex << StringPrintf("%02X", begin_instr[i]); |
| } |
| std::stringstream prefixed_opcode; |
| switch (prefix[0]) { |
| case 0xF0: prefixed_opcode << "lock "; break; |
| case 0xF2: prefixed_opcode << "repne "; break; |
| case 0xF3: prefixed_opcode << "repe "; break; |
| case 0: break; |
| default: LOG(FATAL) << "Unreachable"; |
| } |
| prefixed_opcode << opcode.str(); |
| os << StringPrintf("%p: %22s \t%-7s ", begin_instr, hex.str().c_str(), |
| prefixed_opcode.str().c_str()) |
| << args.str() << '\n'; |
| return instr - begin_instr; |
| } // NOLINT(readability/fn_size) |
| |
| } // namespace x86 |
| } // namespace art |