| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains the Bluetooth Manager (BTM) API function external |
| * definitions. |
| * |
| ******************************************************************************/ |
| #ifndef BTM_BLE_API_H |
| #define BTM_BLE_API_H |
| |
| #include "btm_api.h" |
| #include "gki.h" |
| |
| #define CHNL_MAP_LEN 5 |
| typedef UINT8 tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN]; |
| |
| /* 0x00-0x04 only used for set advertising parameter command */ |
| #define BTM_BLE_CONNECT_EVT 0x00 /* 0x00-0x04 only used for set advertising |
| parameter command */ |
| #define BTM_BLE_CONNECT_DIR_EVT 0x01 /* Connectable directed advertising */ |
| #define BTM_BLE_DISCOVER_EVT 0x02 /* Scannable undirected advertising */ |
| #define BTM_BLE_NON_CONNECT_EVT 0x03 /* Non connectable undirected advertising */ |
| #define BTM_BLE_CONNECT_LO_DUTY_DIR_EVT 0x04 /* Connectable low duty |
| cycle directed advertising */ |
| /* 0x00 - 0x05 can be received on adv event type */ |
| #define BTM_BLE_SCAN_RSP_EVT 0x04 |
| #define BTM_BLE_SCAN_REQ_EVT 0x05 |
| #define BTM_BLE_UNKNOWN_EVT 0xff |
| |
| #define BTM_BLE_UNKNOWN_EVT 0xff |
| |
| typedef UINT32 tBTM_BLE_REF_VALUE; |
| |
| #define BTM_BLE_SCAN_MODE_PASS 0 |
| #define BTM_BLE_SCAN_MODE_ACTI 1 |
| #define BTM_BLE_SCAN_MODE_NONE 0xff |
| typedef UINT8 tBTM_BLE_SCAN_MODE; |
| |
| #define BTM_BLE_BATCH_SCAN_MODE_DISABLE 0 |
| #define BTM_BLE_BATCH_SCAN_MODE_PASS 1 |
| #define BTM_BLE_BATCH_SCAN_MODE_ACTI 2 |
| #define BTM_BLE_BATCH_SCAN_MODE_PASS_ACTI 3 |
| |
| typedef UINT8 tBTM_BLE_BATCH_SCAN_MODE; |
| |
| /* advertising channel map */ |
| #define BTM_BLE_ADV_CHNL_37 (0x01 << 0) |
| #define BTM_BLE_ADV_CHNL_38 (0x01 << 1) |
| #define BTM_BLE_ADV_CHNL_39 (0x01 << 2) |
| typedef UINT8 tBTM_BLE_ADV_CHNL_MAP; |
| |
| /*d efault advertising channel map */ |
| #ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP |
| #define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39) |
| #endif |
| |
| /* advertising filter policy */ |
| #define AP_SCAN_CONN_ALL 0x00 /* default */ |
| #define AP_SCAN_WL_CONN_ALL 0x01 |
| #define AP_SCAN_ALL_CONN_WL 0x02 |
| #define AP_SCAN_CONN_WL 0x03 |
| #define AP_SCAN_CONN_POLICY_MAX 0x04 |
| typedef UINT8 tBTM_BLE_AFP; |
| |
| /* default advertising filter policy */ |
| #ifndef BTM_BLE_DEFAULT_AFP |
| #define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL |
| #endif |
| |
| /* scanning filter policy */ |
| #define SP_ADV_ALL 0x00 /* accept adv pakt from all, directed adv pkt not directed to me is ignored */ |
| #define SP_ADV_WL 0x01 /* accept adv pakt from device in white list, directed adv pkt not directed to me is ignored */ |
| typedef UINT8 tBTM_BLE_SFP; |
| |
| #ifndef BTM_BLE_DEFAULT_SFP |
| #define BTM_BLE_DEFAULT_SFP SP_ADV_ALL |
| #endif |
| |
| /* adv parameter boundary values */ |
| #define BTM_BLE_ADV_INT_MIN 0x0020 |
| #define BTM_BLE_ADV_INT_MAX 0x4000 |
| |
| /* Full scan boundary values */ |
| #define BTM_BLE_ADV_SCAN_FULL_MIN 0x00 |
| #define BTM_BLE_ADV_SCAN_FULL_MAX 0x64 |
| |
| /* Partial scan boundary values */ |
| #define BTM_BLE_ADV_SCAN_TRUNC_MIN BTM_BLE_ADV_SCAN_FULL_MIN |
| #define BTM_BLE_ADV_SCAN_TRUNC_MAX BTM_BLE_ADV_SCAN_FULL_MAX |
| |
| /* Threshold values */ |
| #define BTM_BLE_ADV_SCAN_THR_MIN BTM_BLE_ADV_SCAN_FULL_MIN |
| #define BTM_BLE_ADV_SCAN_THR_MAX BTM_BLE_ADV_SCAN_FULL_MAX |
| |
| /* connection parameter boundary values */ |
| #define BTM_BLE_SCAN_INT_MIN 0x0004 |
| #define BTM_BLE_SCAN_INT_MAX 0x4000 |
| #define BTM_BLE_SCAN_WIN_MIN 0x0004 |
| #define BTM_BLE_SCAN_WIN_MAX 0x4000 |
| #define BTM_BLE_CONN_INT_MIN 0x0006 |
| #define BTM_BLE_CONN_INT_MAX 0x0C80 |
| #define BTM_BLE_CONN_LATENCY_MAX 500 |
| #define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A |
| #define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80 |
| #define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */ |
| |
| /* default connection parameters if not configured, use GAP recommend value for auto/selective connection */ |
| /* default scan interval */ |
| #ifndef BTM_BLE_SCAN_FAST_INT |
| #define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */ |
| #endif |
| /* default scan window for background connection, applicable for auto connection or selective conenction */ |
| #ifndef BTM_BLE_SCAN_FAST_WIN |
| #define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */ |
| #endif |
| |
| /* default scan paramter used in reduced power cycle (background scanning) */ |
| #ifndef BTM_BLE_SCAN_SLOW_INT_1 |
| #define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */ |
| #endif |
| #ifndef BTM_BLE_SCAN_SLOW_WIN_1 |
| #define BTM_BLE_SCAN_SLOW_WIN_1 48 /* 30 ms = 48 *0.625 */ |
| #endif |
| |
| /* default scan paramter used in reduced power cycle (background scanning) */ |
| #ifndef BTM_BLE_SCAN_SLOW_INT_2 |
| #define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */ |
| #endif |
| #ifndef BTM_BLE_SCAN_SLOW_WIN_2 |
| #define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */ |
| #endif |
| |
| /* default connection interval min */ |
| #ifndef BTM_BLE_CONN_INT_MIN_DEF |
| #define BTM_BLE_CONN_INT_MIN_DEF 24 /* recommended min: 30ms = 24 * 1.25 */ |
| #endif |
| /* default connectino interval max */ |
| #ifndef BTM_BLE_CONN_INT_MAX_DEF |
| #define BTM_BLE_CONN_INT_MAX_DEF 40 /* recommended max: 50 ms = 56 * 1.25 */ |
| #endif |
| /* default slave latency */ |
| #ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF |
| #define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */ |
| #endif |
| /* default supervision timeout */ |
| #ifndef BTM_BLE_CONN_TIMEOUT_DEF |
| #define BTM_BLE_CONN_TIMEOUT_DEF 2000 |
| #endif |
| |
| #define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1 |
| #define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2 |
| |
| #ifndef BTM_BLE_DIR_CONN_FALLBACK |
| #define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR |
| #endif |
| |
| #define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */ |
| #define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/ |
| typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */ |
| |
| #ifndef BTM_BLE_HOST_SUPPORT |
| #define BTM_BLE_HOST_SUPPORT 0x01 |
| #endif |
| |
| #ifndef BTM_BLE_SIMULTANEOUS_HOST |
| #define BTM_BLE_SIMULTANEOUS_HOST 0x01 |
| #endif |
| |
| /* Appearance Values Reported with BTM_BLE_AD_TYPE_APPEARANCE */ |
| #define BTM_BLE_APPEARANCE_UKNOWN 0x0000 |
| #define BTM_BLE_APPEARANCE_GENERIC_PHONE 0x0040 |
| #define BTM_BLE_APPEARANCE_GENERIC_COMPUTER 0x0080 |
| #define BTM_BLE_APPEARANCE_GENERIC_WATCH 0x00C0 |
| #define BTM_BLE_APPEARANCE_SPORTS_WATCH 0x00C1 |
| #define BTM_BLE_APPEARANCE_GENERIC_CLOCK 0x0100 |
| #define BTM_BLE_APPEARANCE_GENERIC_DISPLAY 0x0140 |
| #define BTM_BLE_APPEARANCE_GENERIC_REMOTE 0x0180 |
| #define BTM_BLE_APPEARANCE_GENERIC_EYEGLASSES 0x01C0 |
| #define BTM_BLE_APPEARANCE_GENERIC_TAG 0x0200 |
| #define BTM_BLE_APPEARANCE_GENERIC_KEYRING 0x0240 |
| #define BTM_BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 0x0280 |
| #define BTM_BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 0x02C0 |
| #define BTM_BLE_APPEARANCE_GENERIC_THERMOMETER 0x0300 |
| #define BTM_BLE_APPEARANCE_THERMOMETER_EAR 0x0301 |
| #define BTM_BLE_APPEARANCE_GENERIC_HEART_RATE 0x0340 |
| #define BTM_BLE_APPEARANCE_HEART_RATE_BELT 0x0341 |
| #define BTM_BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 0x0380 |
| #define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_ARM 0x0381 |
| #define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 0x0382 |
| #define BTM_BLE_APPEARANCE_GENERIC_HID 0x03C0 |
| #define BTM_BLE_APPEARANCE_HID_KEYBOARD 0x03C1 |
| #define BTM_BLE_APPEARANCE_HID_MOUSE 0x03C2 |
| #define BTM_BLE_APPEARANCE_HID_JOYSTICK 0x03C3 |
| #define BTM_BLE_APPEARANCE_HID_GAMEPAD 0x03C4 |
| #define BTM_BLE_APPEARANCE_HID_DIGITIZER_TABLET 0x03C5 |
| #define BTM_BLE_APPEARANCE_HID_CARD_READER 0x03C6 |
| #define BTM_BLE_APPEARANCE_HID_DIGITAL_PEN 0x03C7 |
| #define BTM_BLE_APPEARANCE_HID_BARCODE_SCANNER 0x03C8 |
| #define BTM_BLE_APPEARANCE_GENERIC_GLUCOSE 0x0400 |
| #define BTM_BLE_APPEARANCE_GENERIC_WALKING 0x0440 |
| #define BTM_BLE_APPEARANCE_WALKING_IN_SHOE 0x0441 |
| #define BTM_BLE_APPEARANCE_WALKING_ON_SHOE 0x0442 |
| #define BTM_BLE_APPEARANCE_WALKING_ON_HIP 0x0443 |
| #define BTM_BLE_APPEARANCE_GENERIC_CYCLING 0x0480 |
| #define BTM_BLE_APPEARANCE_CYCLING_COMPUTER 0x0481 |
| #define BTM_BLE_APPEARANCE_CYCLING_SPEED 0x0482 |
| #define BTM_BLE_APPEARANCE_CYCLING_CADENCE 0x0483 |
| #define BTM_BLE_APPEARANCE_CYCLING_POWER 0x0484 |
| #define BTM_BLE_APPEARANCE_CYCLING_SPEED_CADENCE 0x0485 |
| #define BTM_BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 0x0C40 |
| #define BTM_BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 0x0C41 |
| #define BTM_BLE_APPEARANCE_PULSE_OXIMETER_WRIST 0x0C42 |
| #define BTM_BLE_APPEARANCE_GENERIC_WEIGHT 0x0C80 |
| #define BTM_BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS 0x1440 |
| #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION 0x1441 |
| #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_AND_NAV 0x1442 |
| #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD 0x1443 |
| #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD_AND_NAV 0x1444 |
| |
| #define WRITE_RSSI_MONITOR_THRESHOLD 0xF2 |
| #define READ_RSSI_MONITOR_THRESHOLD 0xF3 |
| #define ENABLE_RSSI_MONITOR 0xF4 |
| |
| /* Structure returned with Rand/Encrypt complete callback */ |
| typedef struct |
| { |
| UINT8 status; |
| UINT8 param_len; |
| UINT16 opcode; |
| UINT8 param_buf[BT_OCTET16_LEN]; |
| } tBTM_RAND_ENC; |
| |
| /* General callback function for notifying an application that a synchronous |
| ** BTM function is complete. The pointer contains the address of any returned data. |
| */ |
| typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1); |
| |
| #define BTM_BLE_FILTER_TARGET_SCANNER 0x01 |
| #define BTM_BLE_FILTER_TARGET_ADVR 0x00 |
| |
| #define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */ |
| #define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */ |
| #define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */ |
| #define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */ |
| |
| /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ |
| #define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0) |
| #define BTM_BLE_GEN_DISC_FLAG (0x01 << 1) |
| #define BTM_BLE_BREDR_NOT_SPT (0x01 << 2) |
| /* 4.1 spec adv flag for simultaneous BR/EDR+LE connection support */ |
| #define BTM_BLE_DMT_CONTROLLER_SPT (0x01 << 3) |
| #define BTM_BLE_DMT_HOST_SPT (0x01 << 4) |
| #define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */ |
| #define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG) |
| #define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG ) |
| |
| #define BTM_BLE_AD_BIT_DEV_NAME (0x00000001 << 0) |
| #define BTM_BLE_AD_BIT_FLAGS (0x00000001 << 1) |
| #define BTM_BLE_AD_BIT_MANU (0x00000001 << 2) |
| #define BTM_BLE_AD_BIT_TX_PWR (0x00000001 << 3) |
| #define BTM_BLE_AD_BIT_INT_RANGE (0x00000001 << 5) |
| #define BTM_BLE_AD_BIT_SERVICE (0x00000001 << 6) |
| #define BTM_BLE_AD_BIT_SERVICE_SOL (0x00000001 << 7) |
| #define BTM_BLE_AD_BIT_SERVICE_DATA (0x00000001 << 8) |
| #define BTM_BLE_AD_BIT_SIGN_DATA (0x00000001 << 9) |
| #define BTM_BLE_AD_BIT_SERVICE_128SOL (0x00000001 << 10) |
| #define BTM_BLE_AD_BIT_APPEARANCE (0x00000001 << 11) |
| #define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x00000001 << 12) |
| #define BTM_BLE_AD_BIT_RANDOM_ADDR (0x00000001 << 13) |
| #define BTM_BLE_AD_BIT_SERVICE_32 (0x00000001 << 4) |
| #define BTM_BLE_AD_BIT_SERVICE_32SOL (0x00000001 << 14) |
| #define BTM_BLE_AD_BIT_PROPRIETARY (0x00000001 << 15) |
| #define BTM_BLE_AD_BIT_SERVICE_128 (0x00000001 << 16) /*128-bit Service UUIDs*/ |
| |
| typedef UINT32 tBTM_BLE_AD_MASK; |
| |
| #define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */ |
| #define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ |
| #define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ |
| #define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ |
| #define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ |
| #define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ |
| #define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ |
| #define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ |
| #define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ |
| #define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ |
| #define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D |
| #define BTM_BLE_AD_TYPE_SM_TK 0x10 |
| #define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11 |
| #define BTM_BLE_AD_TYPE_INT_RANGE 0x12 |
| #define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14 |
| #define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15 |
| #define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16 |
| #define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17 |
| #define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18 |
| #define BTM_BLE_AD_TYPE_APPEARANCE 0x19 |
| #define BTM_BLE_AD_TYPE_ADV_INT 0x1a |
| #define BTM_BLE_AD_TYPE_32SOL_SRV_UUID 0x1b |
| #define BTM_BLE_AD_TYPE_32SERVICE_DATA 0x1c |
| #define BTM_BLE_AD_TYPE_128SERVICE_DATA 0x1d |
| |
| #define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */ |
| typedef UINT8 tBTM_BLE_AD_TYPE; |
| |
| /* adv tx power level */ |
| #define BTM_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */ |
| #define BTM_BLE_ADV_TX_POWER_LOW 1 /* low tx power */ |
| #define BTM_BLE_ADV_TX_POWER_MID 2 /* middle tx power */ |
| #define BTM_BLE_ADV_TX_POWER_UPPER 3 /* upper tx power */ |
| #define BTM_BLE_ADV_TX_POWER_MAX 4 /* maximum tx power */ |
| typedef UINT8 tBTM_BLE_ADV_TX_POWER; |
| |
| /* adv tx power in dBm */ |
| typedef struct |
| { |
| UINT8 adv_inst_max; /* max adv instance supported in controller */ |
| UINT8 rpa_offloading; |
| UINT16 tot_scan_results_strg; |
| UINT8 max_irk_list_sz; |
| UINT8 filter_support; |
| UINT8 max_filter; |
| UINT8 energy_support; |
| BOOLEAN values_read; |
| }tBTM_BLE_VSC_CB; |
| |
| /* slave preferred connection interval range */ |
| typedef struct |
| { |
| UINT16 low; |
| UINT16 hi; |
| |
| }tBTM_BLE_INT_RANGE; |
| |
| /* Service tag supported in the device */ |
| typedef struct |
| { |
| UINT8 num_service; |
| BOOLEAN list_cmpl; |
| UINT16 *p_uuid; |
| }tBTM_BLE_SERVICE; |
| |
| /* 32 bits Service supported in the device */ |
| typedef struct |
| { |
| UINT8 num_service; |
| BOOLEAN list_cmpl; |
| UINT32 *p_uuid; |
| }tBTM_BLE_32SERVICE; |
| |
| /* 128 bits Service supported in the device */ |
| typedef struct |
| { |
| BOOLEAN list_cmpl; |
| UINT8 uuid128[MAX_UUID_SIZE]; |
| }tBTM_BLE_128SERVICE; |
| |
| typedef struct |
| { |
| UINT8 len; |
| UINT8 *p_val; |
| }tBTM_BLE_MANU; |
| |
| |
| typedef struct |
| { |
| tBT_UUID service_uuid; |
| UINT8 len; |
| UINT8 *p_val; |
| }tBTM_BLE_SERVICE_DATA; |
| |
| typedef struct |
| { |
| UINT8 adv_type; |
| UINT8 len; |
| UINT8 *p_val; /* number of len byte */ |
| }tBTM_BLE_PROP_ELEM; |
| |
| typedef struct |
| { |
| UINT8 num_elem; |
| tBTM_BLE_PROP_ELEM *p_elem; |
| }tBTM_BLE_PROPRIETARY; |
| |
| typedef struct |
| { |
| tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ |
| tBTM_BLE_MANU *p_manu; /* manufactuer data */ |
| tBTM_BLE_SERVICE *p_services; /* services */ |
| tBTM_BLE_128SERVICE *p_services_128b; /* 128 bits service */ |
| tBTM_BLE_32SERVICE *p_service_32b; /* 32 bits Service UUID */ |
| tBTM_BLE_SERVICE *p_sol_services; /* 16 bits services Solicitation UUIDs */ |
| tBTM_BLE_32SERVICE *p_sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */ |
| tBTM_BLE_128SERVICE *p_sol_service_128b; /* List of 128 bit Service Solicitation UUIDs */ |
| tBTM_BLE_PROPRIETARY *p_proprietary; |
| tBTM_BLE_SERVICE_DATA *p_service_data; /* service data */ |
| UINT16 appearance; |
| UINT8 flag; |
| UINT8 tx_power; |
| }tBTM_BLE_ADV_DATA; |
| |
| #ifndef BTM_BLE_MULTI_ADV_MAX |
| #define BTM_BLE_MULTI_ADV_MAX 10 /* controller returned adv_inst_max should be less |
| than this number */ |
| #endif |
| |
| #define BTM_BLE_MULTI_ADV_INVALID 0 |
| |
| #define BTM_BLE_MULTI_ADV_ENB_EVT 1 |
| #define BTM_BLE_MULTI_ADV_DISABLE_EVT 2 |
| #define BTM_BLE_MULTI_ADV_PARAM_EVT 3 |
| #define BTM_BLE_MULTI_ADV_DATA_EVT 4 |
| typedef UINT8 tBTM_BLE_MULTI_ADV_EVT; |
| |
| #define BTM_BLE_MULTI_ADV_DEFAULT_STD 0 |
| |
| typedef struct |
| { |
| UINT16 adv_int_min; |
| UINT16 adv_int_max; |
| UINT8 adv_type; |
| tBTM_BLE_ADV_CHNL_MAP channel_map; |
| tBTM_BLE_AFP adv_filter_policy; |
| tBTM_BLE_ADV_TX_POWER tx_power; |
| }tBTM_BLE_ADV_PARAMS; |
| |
| typedef struct |
| { |
| UINT8 *p_sub_code; /* dynamic array to store sub code */ |
| UINT8 *p_inst_id; /* dynamic array to store instance id */ |
| UINT8 pending_idx; |
| UINT8 next_idx; |
| }tBTM_BLE_MULTI_ADV_OPQ; |
| |
| typedef void (tBTM_BLE_MULTI_ADV_CBACK)(tBTM_BLE_MULTI_ADV_EVT evt, UINT8 inst_id, |
| void *p_ref, tBTM_STATUS status); |
| |
| typedef struct |
| { |
| UINT8 inst_id; |
| UINT8 adv_evt; |
| BD_ADDR rpa; |
| TIMER_LIST_ENT raddr_timer_ent; |
| tBTM_BLE_MULTI_ADV_CBACK *p_cback; |
| void *p_ref; |
| UINT8 index; |
| }tBTM_BLE_MULTI_ADV_INST; |
| |
| typedef struct |
| { |
| UINT8 inst_index_queue[BTM_BLE_MULTI_ADV_MAX]; |
| int front; |
| int rear; |
| }tBTM_BLE_MULTI_ADV_INST_IDX_Q; |
| |
| typedef struct |
| { |
| tBTM_BLE_MULTI_ADV_INST *p_adv_inst; /* dynamic array to store adv instance */ |
| tBTM_BLE_MULTI_ADV_OPQ op_q; |
| }tBTM_BLE_MULTI_ADV_CB; |
| |
| typedef void (tBTM_BLE_SCAN_THRESHOLD_CBACK)(tBTM_BLE_REF_VALUE ref_value); |
| typedef void (tBTM_BLE_SCAN_REP_CBACK)(tBTM_BLE_REF_VALUE ref_value, UINT8 report_format, |
| UINT8 num_records, UINT16 total_len, |
| UINT8* p_rep_data, UINT8 status); |
| typedef void (tBTM_BLE_SCAN_SETUP_CBACK)(UINT8 evt, tBTM_BLE_REF_VALUE ref_value, UINT8 status); |
| |
| #ifndef BTM_BLE_BATCH_SCAN_MAX |
| #define BTM_BLE_BATCH_SCAN_MAX 5 |
| #endif |
| |
| #ifndef BTM_BLE_BATCH_REP_MAIN_Q_SIZE |
| #define BTM_BLE_BATCH_REP_MAIN_Q_SIZE 2 |
| #endif |
| |
| typedef enum |
| { |
| BTM_BLE_SCAN_INVALID_STATE=0, |
| BTM_BLE_SCAN_ENABLE_CALLED=1, |
| BTM_BLE_SCAN_ENABLED_STATE=2, |
| BTM_BLE_SCAN_DISABLE_CALLED=3, |
| BTM_BLE_SCAN_DISABLED_STATE=4 |
| }tBTM_BLE_BATCH_SCAN_STATE; |
| |
| enum |
| { |
| BTM_BLE_DISCARD_OLD_ITEMS, |
| BTM_BLE_DISCARD_LOWER_RSSI_ITEMS |
| }; |
| typedef UINT8 tBTM_BLE_DISCARD_RULE; |
| |
| typedef struct |
| { |
| UINT8 sub_code[BTM_BLE_BATCH_SCAN_MAX]; |
| tBTM_BLE_BATCH_SCAN_STATE cur_state[BTM_BLE_BATCH_SCAN_MAX]; |
| tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_SCAN_MAX]; |
| UINT8 pending_idx; |
| UINT8 next_idx; |
| }tBTM_BLE_BATCH_SCAN_OPQ; |
| |
| typedef struct |
| { |
| UINT8 rep_mode[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; |
| tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; |
| UINT8 num_records[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; |
| UINT16 data_len[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; |
| UINT8 *p_data[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; |
| UINT8 pending_idx; |
| UINT8 next_idx; |
| }tBTM_BLE_BATCH_SCAN_REP_Q; |
| |
| typedef struct |
| { |
| tBTM_BLE_BATCH_SCAN_STATE cur_state; |
| tBTM_BLE_BATCH_SCAN_MODE scan_mode; |
| UINT32 scan_interval; |
| UINT32 scan_window; |
| tBLE_ADDR_TYPE addr_type; |
| tBTM_BLE_DISCARD_RULE discard_rule; |
| tBTM_BLE_BATCH_SCAN_OPQ op_q; |
| tBTM_BLE_BATCH_SCAN_REP_Q main_rep_q; |
| tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback; |
| tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback; |
| tBTM_BLE_SCAN_REP_CBACK *p_scan_rep_cback; |
| tBTM_BLE_REF_VALUE ref_value; |
| }tBTM_BLE_BATCH_SCAN_CB; |
| |
| /* filter selection bit index */ |
| #define BTM_BLE_PF_ADDR_FILTER 0 |
| #define BTM_BLE_PF_SRVC_DATA 1 |
| #define BTM_BLE_PF_SRVC_UUID 2 |
| #define BTM_BLE_PF_SRVC_SOL_UUID 3 |
| #define BTM_BLE_PF_LOCAL_NAME 4 |
| #define BTM_BLE_PF_MANU_DATA 5 |
| #define BTM_BLE_PF_SRVC_DATA_PATTERN 6 |
| #define BTM_BLE_PF_TYPE_ALL 7 /* when passed in payload filter type all, only clear action is applicable */ |
| #define BTM_BLE_PF_TYPE_MAX 8 |
| |
| /* max number of filter spot for different filter type */ |
| #ifndef BTM_BLE_MAX_UUID_FILTER |
| #define BTM_BLE_MAX_UUID_FILTER 8 |
| #endif |
| #ifndef BTM_BLE_MAX_ADDR_FILTER |
| #define BTM_BLE_MAX_ADDR_FILTER 8 |
| #endif |
| #ifndef BTM_BLE_PF_STR_COND_MAX |
| #define BTM_BLE_PF_STR_COND_MAX 4 /* apply to manu data , or local name */ |
| #endif |
| #ifndef BTM_BLE_PF_STR_LEN_MAX |
| #define BTM_BLE_PF_STR_LEN_MAX 29 /* match for first 29 bytes */ |
| #endif |
| |
| typedef UINT8 tBTM_BLE_PF_COND_TYPE; |
| |
| #define BTM_BLE_PF_LOGIC_OR 0 |
| #define BTM_BLE_PF_LOGIC_AND 1 |
| typedef UINT8 tBTM_BLE_PF_LOGIC_TYPE; |
| |
| #define BTM_BLE_PF_ENABLE 1 |
| #define BTM_BLE_PF_CONFIG 2 |
| typedef UINT8 tBTM_BLE_PF_ACTION; |
| |
| typedef UINT8 tBTM_BLE_PF_FILT_INDEX; |
| |
| typedef UINT8 tBTM_BLE_PF_AVBL_SPACE; |
| |
| #define BTM_BLE_PF_BRDCAST_ADDR_FILT 1 |
| #define BTM_BLE_PF_SERV_DATA_CHG_FILT 2 |
| #define BTM_BLE_PF_SERV_UUID 4 |
| #define BTM_BLE_PF_SERV_SOLC_UUID 8 |
| #define BTM_BLE_PF_LOC_NAME_CHECK 16 |
| #define BTM_BLE_PF_MANUF_NAME_CHECK 32 |
| #define BTM_BLE_PF_SERV_DATA_CHECK 64 |
| typedef UINT16 tBTM_BLE_PF_FEAT_SEL; |
| |
| #define BTM_BLE_PF_LIST_LOGIC_OR 1 |
| #define BTM_BLE_PF_LIST_LOGIC_AND 2 |
| typedef UINT16 tBTM_BLE_PF_LIST_LOGIC_TYPE; |
| |
| #define BTM_BLE_PF_FILT_LOGIC_OR 0 |
| #define BTM_BLE_PF_FILT_LOGIC_AND 1 |
| typedef UINT16 tBTM_BLE_PF_FILT_LOGIC_TYPE; |
| |
| typedef UINT8 tBTM_BLE_PF_RSSI_THRESHOLD; |
| typedef UINT8 tBTM_BLE_PF_DELIVERY_MODE; |
| typedef UINT16 tBTM_BLE_PF_TIMEOUT; |
| typedef UINT8 tBTM_BLE_PF_TIMEOUT_CNT; |
| |
| typedef struct |
| { |
| tBTM_BLE_PF_FEAT_SEL feat_seln; |
| tBTM_BLE_PF_LIST_LOGIC_TYPE logic_type; |
| tBTM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type; |
| tBTM_BLE_PF_RSSI_THRESHOLD rssi_high_thres; |
| tBTM_BLE_PF_RSSI_THRESHOLD rssi_low_thres; |
| tBTM_BLE_PF_DELIVERY_MODE dely_mode; |
| tBTM_BLE_PF_TIMEOUT found_timeout; |
| tBTM_BLE_PF_TIMEOUT lost_timeout; |
| tBTM_BLE_PF_TIMEOUT_CNT found_timeout_cnt; |
| }tBTM_BLE_PF_FILT_PARAMS; |
| |
| enum |
| { |
| BTM_BLE_SCAN_COND_ADD, |
| BTM_BLE_SCAN_COND_DELETE, |
| BTM_BLE_SCAN_COND_CLEAR = 2 |
| }; |
| typedef UINT8 tBTM_BLE_SCAN_COND_OP; |
| |
| enum |
| { |
| BTM_BLE_FILT_ENABLE_DISABLE = 1, |
| BTM_BLE_FILT_CFG = 2, |
| BTM_BLE_FILT_ADV_PARAM = 3 |
| }; |
| |
| typedef UINT8 tBTM_BLE_FILT_CB_EVT; |
| |
| /* BLE adv payload filtering config complete callback */ |
| typedef void (tBTM_BLE_PF_CFG_CBACK)(tBTM_BLE_PF_ACTION action, tBTM_BLE_SCAN_COND_OP cfg_op, |
| tBTM_BLE_PF_AVBL_SPACE avbl_space, tBTM_STATUS status, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| typedef void (tBTM_BLE_PF_CMPL_CBACK) (tBTM_BLE_PF_CFG_CBACK); |
| |
| /* BLE adv payload filtering status setup complete callback */ |
| typedef void (tBTM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTM_STATUS status, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /* BLE adv payload filtering param setup complete callback */ |
| typedef void (tBTM_BLE_PF_PARAM_CBACK) (tBTM_BLE_PF_ACTION action_type, |
| tBTM_BLE_PF_AVBL_SPACE avbl_space, |
| tBTM_BLE_REF_VALUE ref_value, tBTM_STATUS status); |
| |
| typedef union |
| { |
| UINT16 uuid16_mask; |
| UINT32 uuid32_mask; |
| UINT8 uuid128_mask[LEN_UUID_128]; |
| }tBTM_BLE_PF_COND_MASK; |
| |
| typedef struct |
| { |
| tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */ |
| tBT_UUID uuid; /* UUID condition */ |
| tBTM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */ |
| tBTM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID mask */ |
| }tBTM_BLE_PF_UUID_COND; |
| |
| typedef struct |
| { |
| UINT8 data_len; /* <= 20 bytes */ |
| UINT8 *p_data; |
| }tBTM_BLE_PF_LOCAL_NAME_COND; |
| |
| typedef struct |
| { |
| UINT16 company_id; /* company ID */ |
| UINT8 data_len; /* <= 20 bytes */ |
| UINT8 *p_pattern; |
| UINT16 company_id_mask; /* UUID value mask */ |
| UINT8 *p_pattern_mask; /* Manufactuer data matching mask, same length as data pattern, |
| set to all 0xff, match exact data */ |
| }tBTM_BLE_PF_MANU_COND; |
| |
| typedef struct |
| { |
| UINT16 uuid; /* service ID */ |
| UINT8 data_len; /* <= 20 bytes */ |
| UINT8 *p_pattern; |
| UINT8 *p_pattern_mask; /* Service data matching mask, same length as data pattern, |
| set to all 0xff, match exact data */ |
| }tBTM_BLE_PF_SRVC_PATTERN_COND; |
| |
| |
| typedef union |
| { |
| tBLE_BD_ADDR target_addr; |
| tBTM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */ |
| tBTM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */ |
| tBTM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */ |
| tBTM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */ |
| tBTM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */ |
| }tBTM_BLE_PF_COND_PARAM; |
| |
| typedef struct |
| { |
| UINT8 action_ocf[BTM_BLE_PF_TYPE_MAX]; |
| tBTM_BLE_REF_VALUE ref_value[BTM_BLE_PF_TYPE_MAX]; |
| tBTM_BLE_PF_PARAM_CBACK *p_filt_param_cback[BTM_BLE_PF_TYPE_MAX]; |
| tBTM_BLE_PF_CFG_CBACK *p_scan_cfg_cback[BTM_BLE_PF_TYPE_MAX]; |
| UINT8 cb_evt[BTM_BLE_PF_TYPE_MAX]; |
| UINT8 pending_idx; |
| UINT8 next_idx; |
| }tBTM_BLE_ADV_FILTER_ADV_OPQ; |
| |
| #define BTM_BLE_MAX_FILTER_COUNTER (BTM_BLE_MAX_ADDR_FILTER + 1) /* per device filter + one generic filter indexed by 0 */ |
| |
| #ifndef BTM_CS_IRK_LIST_MAX |
| #define BTM_CS_IRK_LIST_MAX 0x20 |
| #endif |
| |
| typedef struct |
| { |
| BOOLEAN in_use; |
| BD_ADDR bd_addr; |
| UINT8 pf_counter[BTM_BLE_PF_TYPE_MAX]; /* number of filter indexed by tBTM_BLE_PF_COND_TYPE */ |
| }tBTM_BLE_PF_COUNT; |
| |
| typedef struct |
| { |
| BOOLEAN enable; |
| UINT8 op_type; |
| tBTM_BLE_PF_COUNT *p_addr_filter_count; /* per BDA filter array */ |
| tBLE_BD_ADDR cur_filter_target; |
| tBTM_BLE_PF_STATUS_CBACK *p_filt_stat_cback; |
| tBTM_BLE_ADV_FILTER_ADV_OPQ op_q; |
| }tBTM_BLE_ADV_FILTER_CB; |
| |
| /* Sub codes */ |
| #define BTM_BLE_META_PF_ENABLE 0x00 |
| #define BTM_BLE_META_PF_FEAT_SEL 0x01 |
| #define BTM_BLE_META_PF_ADDR 0x02 |
| #define BTM_BLE_META_PF_UUID 0x03 |
| #define BTM_BLE_META_PF_SOL_UUID 0x04 |
| #define BTM_BLE_META_PF_LOCAL_NAME 0x05 |
| #define BTM_BLE_META_PF_MANU_DATA 0x06 |
| #define BTM_BLE_META_PF_SRVC_DATA 0x07 |
| #define BTM_BLE_META_PF_ALL 0x08 |
| |
| /* These are the fields returned in each device adv packet. It |
| ** is returned in the results callback if registered. |
| */ |
| typedef struct |
| { |
| UINT8 conn_mode; |
| tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ |
| UINT8 flag; |
| UINT8 tx_power_level; |
| UINT8 remote_name_len; |
| UINT8 *p_remote_name; |
| tBTM_BLE_SERVICE service; |
| } tBTM_BLE_INQ_DATA; |
| |
| enum |
| { |
| BTM_BLE_CONN_NONE, |
| BTM_BLE_CONN_AUTO, |
| BTM_BLE_CONN_SELECTIVE |
| }; |
| typedef UINT8 tBTM_BLE_CONN_TYPE; |
| |
| typedef void (tBTM_BLE_TRACK_ADV_CBACK)(int filt_index, tBLE_ADDR_TYPE addr_type, BD_ADDR bda, |
| int adv_state, tBTM_BLE_REF_VALUE ref_value); |
| |
| typedef UINT8 tBTM_BLE_TRACK_ADV_EVT; |
| |
| typedef struct |
| { |
| tBTM_BLE_REF_VALUE ref_value; |
| tBTM_BLE_TRACK_ADV_CBACK *p_track_cback; |
| }tBTM_BLE_ADV_TRACK_CB; |
| |
| enum |
| { |
| BTM_BLE_TRACK_ADV_ADD, |
| BTM_BLE_TRACK_ADV_REMOVE |
| }; |
| |
| typedef UINT8 tBTM_BLE_TRACK_ADV_ACTION; |
| |
| #define BTM_BLE_MULTI_ADV_INVALID 0 |
| |
| #define BTM_BLE_BATCH_SCAN_ENABLE_EVT 1 |
| #define BTM_BLE_BATCH_SCAN_CFG_STRG_EVT 2 |
| #define BTM_BLE_BATCH_SCAN_READ_REPTS_EVT 3 |
| #define BTM_BLE_BATCH_SCAN_THR_EVT 4 |
| #define BTM_BLE_BATCH_SCAN_PARAM_EVT 5 |
| #define BTM_BLE_BATCH_SCAN_DISABLE_EVT 6 |
| |
| typedef UINT8 tBTM_BLE_BATCH_SCAN_EVT; |
| |
| typedef UINT32 tBTM_BLE_TX_TIME_MS; |
| typedef UINT32 tBTM_BLE_RX_TIME_MS; |
| typedef UINT32 tBTM_BLE_IDLE_TIME_MS; |
| typedef UINT32 tBTM_BLE_ENERGY_USED; |
| |
| typedef void (tBTM_BLE_ENERGY_INFO_CBACK)(tBTM_BLE_TX_TIME_MS tx_time, tBTM_BLE_RX_TIME_MS rx_time, |
| tBTM_BLE_IDLE_TIME_MS idle_time, |
| tBTM_BLE_ENERGY_USED energy_used, |
| tBTM_STATUS status); |
| |
| typedef struct |
| { |
| tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback; |
| }tBTM_BLE_ENERGY_INFO_CB; |
| |
| typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); |
| typedef void (tBTM_BLE_CTRL_FEATURES_CBACK)(tBTM_STATUS status); |
| |
| /* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */ |
| typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data); |
| typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match); |
| /* random address set complete callback */ |
| typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda); |
| |
| typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt); |
| |
| tBTM_BLE_SCAN_SETUP_CBACK bta_ble_scan_setup_cb; |
| |
| /***************************************************************************** |
| ** EXTERNAL FUNCTION DECLARATIONS |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecAddBleDevice |
| ** |
| ** Description Add/modify device. This function will be normally called |
| ** during host startup to restore all required information |
| ** for a LE device stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** bd_name - Name of the peer device. NULL if unknown. |
| ** dev_type - Remote device's device type. |
| ** addr_type - LE device address type. |
| ** |
| ** Returns TRUE if added OK, else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, |
| tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecAddBleKey |
| ** |
| ** Description Add/modify LE device information. This function will be |
| ** normally called during host startup to restore all required |
| ** information stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** p_le_key - LE key values. |
| ** key_type - LE SMP key type. |
| * |
| ** Returns TRUE if added OK, else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, |
| tBTM_LE_KEY_TYPE key_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteAdvData |
| ** |
| ** Description This function is called to write advertising data. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, |
| tBTM_BLE_ADV_DATA *p_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** chnl_map: advertising channel map. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleObtainVendorCapabilities |
| ** |
| ** Description This function is called to obatin vendor capabilties |
| ** |
| ** Parameters p_cmn_vsc_cb - Returns the vednor capabilities |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| extern void BTM_BleObtainVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetScanParams |
| ** |
| ** Description This function is called to set Scan parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** scan_type: scan mode. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window, |
| tBTM_BLE_SCAN_MODE scan_type); |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleGetVendorCapabilities |
| ** |
| ** Description This function reads local LE features |
| ** |
| ** Parameters p_cmn_vsc_cb : Locala LE capability structure |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb); |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetStorageConfig |
| ** |
| ** Description This function is called to setup storage configuration and setup callbacks. |
| ** |
| ** Parameters UINT8 batch_scan_full_max -Batch scan full maximum |
| UINT8 batch_scan_trunc_max - Batch scan truncated value maximum |
| UINT8 batch_scan_notify_threshold - Threshold value |
| tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback - Setup callback |
| tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold callback |
| void *p_ref - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleSetStorageConfig(UINT8 batch_scan_full_max, |
| UINT8 batch_scan_trunc_max, |
| UINT8 batch_scan_notify_threshold, |
| tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback, |
| tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback, |
| tBTM_BLE_SCAN_REP_CBACK* p_cback, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleEnableBatchScan |
| ** |
| ** Description This function is called to enable batch scan |
| ** |
| ** Parameters tBTM_BLE_BATCH_SCAN_MODE scan_mode - Batch scan mode |
| UINT32 scan_interval -Scan interval |
| UINT32 scan_window - Scan window value |
| tBLE_ADDR_TYPE addr_type - Address type |
| tBTM_BLE_DISCARD_RULE discard_rule - Data discard rules |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleEnableBatchScan(tBTM_BLE_BATCH_SCAN_MODE scan_mode, |
| UINT32 scan_interval, UINT32 scan_window, |
| tBTM_BLE_DISCARD_RULE discard_rule, |
| tBLE_ADDR_TYPE addr_type, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleDisableBatchScan |
| ** |
| ** Description This function is called to disable batch scanning |
| ** |
| ** Parameters void |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleDisableBatchScan(tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReadScanReports |
| ** |
| ** Description This function is called to read batch scan reports |
| ** |
| ** Parameters tBTM_BLE_SCAN_MODE scan_mode - Scan mode report to be read out |
| tBTM_BLE_SCAN_REP_CBACK* p_cback - Reports callback |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleReadScanReports(tBTM_BLE_SCAN_MODE scan_mode, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTrackAdvertiser |
| ** |
| ** Description This function is called to read batch scan reports |
| ** |
| ** Parameters p_track_cback - Tracking callback |
| ** ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleTrackAdvertiser(tBTM_BLE_TRACK_ADV_CBACK *p_track_cback, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteScanRsp |
| ** |
| ** Description This function is called to write LE scan response. |
| ** |
| ** Parameters: p_scan_rsp: scan response. |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, |
| tBTM_BLE_ADV_DATA *p_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleObserve |
| ** |
| ** Description This procedure keep the device listening for advertising |
| ** events from a broadcast device. |
| ** |
| ** Parameters start: start or stop observe. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration, |
| tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceIDRoot |
| ** |
| ** Description This function is called to read the local device identity |
| ** root. |
| ** |
| ** Returns void |
| ** the local device ER is copied into er |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceEncRoot |
| ** |
| ** Description This function is called to read the local device encryption |
| ** root. |
| ** |
| ** Returns void |
| ** the local device ER is copied into er |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceEncRoot (BT_OCTET16 er); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceDHK |
| ** |
| ** Description This function is called to read the local device DHK. |
| ** |
| ** Returns void |
| ** the local device DHK is copied into dhk |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceDHK (BT_OCTET16 dhk); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecurityGrant |
| ** |
| ** Description This function is called to grant security process. |
| ** |
| ** Parameters bd_addr - peer device bd address. |
| ** res - result of the operation BTM_SUCCESS if success. |
| ** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts. |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BlePasskeyReply |
| ** |
| ** Description This function is called after Security Manager submitted |
| ** passkey request to the application. |
| ** |
| ** Parameters: bd_addr - Address of the device for which passkey was requested |
| ** res - result of the operation SMP_SUCCESS if success |
| ** passkey - numeric value in the range of |
| ** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)). |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_LeOobDataReply |
| ** |
| ** Description This function is called to provide the OOB data for |
| ** SMP in response to BTM_LE_OOB_REQ_EVT |
| ** |
| ** Parameters: bd_addr - Address of the peer device |
| ** res - result of the operation SMP_SUCCESS if success |
| ** p_data - simple pairing Randomizer C. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleDataSignature |
| ** |
| ** Description This function is called to sign the data using AES128 CMAC |
| ** algorith. |
| ** |
| ** Parameter bd_addr: target device the data to be signed for. |
| ** p_text: singing data |
| ** len: length of the signing data |
| ** signature: output parameter where data signature is going to |
| ** be stored. |
| ** |
| ** Returns TRUE if signing sucessul, otherwise FALSE. |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len, |
| BLE_SIGNATURE signature); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleVerifySignature |
| ** |
| ** Description This function is called to verify the data signature |
| ** |
| ** Parameter bd_addr: target device the data to be signed for. |
| ** p_orig: original data before signature. |
| ** len: length of the signing data |
| ** counter: counter used when doing data signing |
| ** p_comp: signature to be compared against. |
| |
| ** Returns TRUE if signature verified correctly; otherwise FALSE. |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, |
| UINT16 len, UINT32 counter, |
| UINT8 *p_comp); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadConnectionAddr |
| ** |
| ** Description This function is called to set the local device random address |
| ** . |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRemoteConnectionAddr |
| ** |
| ** Description This function is read the remote device address currently used |
| ** . |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, |
| BD_ADDR conn_addr, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleLoadLocalKeys |
| ** |
| ** Description Local local identity key, encryption root or sign counter. |
| ** |
| ** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER |
| ** or BTM_BLE_KEY_TYPE_COUNTER. |
| ** p_key: pointer to the key. |
| * |
| ** Returns non2. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetBgConnType |
| ** |
| ** Description This function is called to set BLE background connection |
| ** procedure type. It can be auto connection, or selective connection. |
| ** |
| ** Parameters conn_type: it can be auto connection, or selective connection. |
| ** p_select_cback: callback function when selective connection procedure |
| ** is being used. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type, |
| tBTM_BLE_SEL_CBACK *p_select_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateBgConnDev |
| ** |
| ** Description This function is called to add or remove a device into/from |
| ** background connection procedure. The background connection |
| * procedure is decided by the background connection type, it can be |
| * auto connection, or selective connection. |
| ** |
| ** Parameters add_remove: TRUE to add; FALSE to remove. |
| ** remote_bda: device address to add/remove. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleClearBgConnDev |
| ** |
| ** Description This function is called to clear the whitelist, |
| ** end any pending whitelist connections, |
| * and reset the local bg device list. |
| ** |
| ** Parameters void |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleClearBgConnDev(void); |
| |
| /******************************************************** |
| ** |
| ** Function BTM_BleSetPrefConnParams |
| ** |
| ** Description Set a peripheral's preferred connection parameters. When |
| ** any of the value does not want to be updated while others |
| ** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to |
| ** leave untouched. |
| ** |
| ** Parameters: bd_addr - BD address of the peripheral |
| ** min_conn_int - minimum preferred connection interval |
| ** max_conn_int - maximum preferred connection interval |
| ** slave_latency - preferred slave latency |
| ** supervision_tout - preferred supervision timeout |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetPrefConnParams (BD_ADDR bd_addr, |
| UINT16 min_conn_int, UINT16 max_conn_int, |
| UINT16 slave_latency, UINT16 supervision_tout); |
| |
| /****************************************************************************** |
| ** |
| ** Function BTM_BleSetConnScanParams |
| ** |
| ** Description Set scan parameters used in BLE connection request |
| ** |
| ** Parameters: scan_interval - scan interval |
| ** scan_window - scan window |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window); |
| |
| /****************************************************************************** |
| ** |
| ** Function BTM_BleReadControllerFeatures |
| ** |
| ** Description Reads BLE specific controller features |
| ** |
| ** Parameters: tBTM_BLE_CTRL_FEATURES_CBACK : Callback to notify when features are read |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleReadControllerFeatures(tBTM_BLE_CTRL_FEATURES_CBACK *p_vsc_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_CheckAdvData |
| ** |
| ** Description This function is called to get ADV data for a specific type. |
| ** |
| ** Parameters p_adv - pointer of ADV data |
| ** type - finding ADV data type |
| ** p_length - return the length of ADV data not including type |
| ** |
| ** Returns pointer of ADV data |
| ** |
| *******************************************************************************/ |
| BTM_API extern UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadDevInfo |
| ** |
| ** Description This function is called to read the device/address type |
| ** of BD address. |
| ** |
| ** Parameter remote_bda: remote device address |
| ** p_dev_type: output parameter to read the device type. |
| ** p_addr_type: output parameter to read the address type. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleBroadcast |
| ** |
| ** Description This function is to start or stop broadcasting. |
| ** |
| ** Parameters start: start or stop broadcasting. |
| ** |
| ** Returns status. |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_RegisterScanReqEvt |
| ** |
| ** Description This function is called to register a scan request callback |
| ** on the advertiser. |
| ** |
| ** Parameters p_scan_req_cback: scan request callback. If NULL, remove the |
| ** registration. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleConfigPrivacy |
| ** |
| ** Description This function is called to enable or disable the privacy in |
| ** the local device. |
| ** |
| ** Parameters enable: TRUE to enable it; FALSE to disable it. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleConfigPrivacy(BOOLEAN enable); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleLocalPrivacyEnabled |
| ** |
| ** Description Checks if local device supports private address |
| ** |
| ** Returns Return TRUE if local privacy is enabled else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleLocalPrivacyEnabled(); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleMaxMultiAdvInstanceCount |
| ** |
| ** Description Returns max number of multi adv instances supported by controller |
| ** |
| ** Returns Max multi adv instance count |
| ** |
| *******************************************************************************/ |
| BTM_API extern UINT8 BTM_BleMaxMultiAdvInstanceCount(); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetConnMode |
| ** |
| ** Description This function is called to set BLE connectable mode for a |
| ** peripheral device. |
| ** |
| ** Parameters directed: is directed connectable mode, or non-directed. |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleSetConnMode(BOOLEAN directed); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTurnOnPrivacyOnRemote |
| ** |
| ** Description This function is called to enable or disable the privacy on the |
| ** remote device. |
| ** |
| ** Parameters bd_addr: remote device address. |
| ** privacy_on: TRUE to enable it; FALSE to disable it. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr, |
| BOOLEAN privacy_on); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvWhitelist |
| ** |
| ** Description Add or remove device from advertising white list |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvFilterPolicy |
| ** |
| ** Description This function update the filter policy of advertiser. |
| ** |
| ** Parameter adv_policy: advertising filter policy |
| ** |
| ** Return void |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReceiverTest |
| ** |
| ** Description This function is called to start the LE Receiver test |
| ** |
| ** Parameter rx_freq - Frequency Range |
| ** p_cmd_cmpl_cback - Command Complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTransmitterTest |
| ** |
| ** Description This function is called to start the LE Transmitter test |
| ** |
| ** Parameter tx_freq - Frequency Range |
| ** test_data_len - Length in bytes of payload data in each packet |
| ** packet_payload - Pattern to use in the payload |
| ** p_cmd_cmpl_cback - Command Complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len, |
| UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTestEnd |
| ** |
| ** Description This function is called to stop the in-progress TX or RX test |
| ** |
| ** Parameter p_cmd_cmpl_cback - Command complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_UseLeLink |
| ** |
| ** Description This function is to select the underneath physical link to use. |
| ** |
| ** Returns TRUE to use LE, FALSE use BR/EDR. |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_UseLeLink (BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleStackEnable |
| ** |
| ** Description Enable/Disable BLE functionality on stack regarless controller |
| ** capability. |
| ** |
| ** Parameters: enable: TRUE to enable, FALSE to disable. |
| ** |
| ** Returns TRUE if added OK, else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleStackEnable (BOOLEAN enable); |
| |
| /*******************************************************************************/ |
| /* Multi ADV API */ |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleEnableAdvInstance |
| ** |
| ** Description This function enable a Multi-ADV instance with the specified |
| ** adv parameters |
| ** |
| ** Parameters p_params: pointer to the adv parameter structure, set as default |
| ** adv parameter when the instance is enabled. |
| ** p_cback: callback function for the adv instance. |
| ** p_ref: reference data attach to the adv instance to be enabled. |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleEnableAdvInstance (tBTM_BLE_ADV_PARAMS *p_params, |
| tBTM_BLE_MULTI_ADV_CBACK *p_cback, |
| void *p_ref); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvInstParam |
| ** |
| ** Description This function update a Multi-ADV instance with the specififed |
| ** adv parameters. |
| ** |
| ** Parameters inst_id: adv instance ID |
| ** p_params: pointer to the adv parameter structure. |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleUpdateAdvInstParam (UINT8 inst_id, tBTM_BLE_ADV_PARAMS *p_params); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleCfgAdvInstData |
| ** |
| ** Description This function configure a Multi-ADV instance with the specified |
| ** adv data or scan response data. |
| ** |
| ** Parameters inst_id: adv instance ID |
| ** is_scan_rsp: is this scacn response, if no set as adv data. |
| ** data_mask: adv data mask. |
| ** p_data: pointer to the adv data structure. |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp, |
| tBTM_BLE_AD_MASK data_mask, |
| tBTM_BLE_ADV_DATA *p_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleDisableAdvInstance |
| ** |
| ** Description This function disable a Multi-ADV instance. |
| ** |
| ** Parameters inst_id: adv instance ID |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleDisableAdvInstance (UINT8 inst_id); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleAdvFilterParamSetup |
| ** |
| ** Description This function is called to setup the adv data payload filter |
| ** condition. |
| ** |
| ** Parameters p_target: enabble the filter condition on a target device; if NULL |
| ** enable the generic scan condition. |
| ** enable: enable or disable the filter condition |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleAdvFilterParamSetup(int action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_FILT_PARAMS *p_filt_params, |
| tBLE_BD_ADDR *p_target, tBTM_BLE_PF_PARAM_CBACK *p_cmpl_cback, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleCfgFilterCondition |
| ** |
| ** Description This function is called to configure the adv data payload filter |
| ** condition. |
| ** |
| ** Parameters action: to read/write/clear |
| ** cond_type: filter condition type. |
| ** p_cond: filter condition paramter |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleCfgFilterCondition(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_COND_TYPE cond_type, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_COND_PARAM *p_cond, |
| tBTM_BLE_PF_CFG_CBACK *p_cmpl_cback, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleEnableDisableFilterFeature |
| ** |
| ** Description This function is called to enable or disable the APCF feature |
| ** |
| ** Parameters enable - TRUE - enables the APCF, FALSE - disables the APCF |
| ** ref_value - Ref value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleEnableDisableFilterFeature(UINT8 enable, |
| tBTM_BLE_PF_STATUS_CBACK *p_stat_cback, |
| tBTM_BLE_REF_VALUE ref_value); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleGetEnergyInfo |
| ** |
| ** Description This function obtains the energy info |
| ** |
| ** Parameters p_ener_cback - Callback pointer |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleGetEnergyInfo(tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |