| # |
| # For a description of the syntax of this configuration file, |
| # see scripts/kbuild/config-language.txt. |
| # |
| |
| menu "Networking Utilities" |
| |
| config CONFIG_FEATURE_IPV6 |
| bool "Enable IPv6 support" |
| default n |
| help |
| Enable IPv6 support to busybox. This makes applets that talk IP |
| able to work with IPv6. |
| |
| config CONFIG_ARPING |
| bool "arping" |
| default n |
| help |
| Ping hosts by ARP packets |
| |
| config CONFIG_FTPGET |
| bool "ftpget" |
| default n |
| help |
| Retrieve a remote file via FTP. |
| |
| config CONFIG_FTPPUT |
| bool "ftpput" |
| default n |
| help |
| Store a remote file via FTP. |
| |
| config CONFIG_HOSTNAME |
| bool "hostname" |
| default n |
| help |
| Show or set the system's host name |
| |
| config CONFIG_HTTPD |
| bool "httpd" |
| default n |
| help |
| Serve web pages via an HTTP server. |
| |
| config CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY |
| bool " Support using httpd only from inetd" |
| default n |
| depends on CONFIG_HTTPD |
| help |
| This option disables uid and port options for the httpd applet |
| but requires inetd server daemon. |
| |
| config CONFIG_FEATURE_HTTPD_BASIC_AUTH |
| bool " Enable Basic http Authentication" |
| default y |
| depends on CONFIG_HTTPD |
| help |
| Utilizes password settings from /etc/httpd.conf for basic |
| authentication on a per url basis. |
| |
| config CONFIG_FEATURE_HTTPD_AUTH_MD5 |
| bool " Support MD5 crypted passwords for http Authentication" |
| default n |
| depends on CONFIG_FEATURE_HTTPD_BASIC_AUTH |
| help |
| Enables basic per url authentication from /etc/httpd.conf |
| using md5 passwords. |
| |
| |
| if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY |
| config CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP |
| bool " Support reloading the global config file using hup signal" |
| default n |
| depends on CONFIG_HTTPD |
| help |
| This option enables processing of SIGHUP to reload cached |
| configuration settings. |
| |
| config CONFIG_FEATURE_HTTPD_SETUID |
| bool " Enable support -u <user> option" |
| default n |
| depends on CONFIG_HTTPD |
| help |
| This option allows the server to run as a specific user |
| rather than defaulting to the user that starts the server. |
| Use of this option requires special privilegies to change to a |
| different user. |
| endif |
| |
| config CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES |
| bool " Support loading additional mime types at run-time" |
| default n |
| depends on CONFIG_HTTPD |
| help |
| This option enables support for additional mime types at |
| run-time to be specified in the configuration file. |
| |
| config CONFIG_FEATURE_HTTPD_CGI |
| bool " Support Common Gateway Interface (CGI)" |
| default y |
| depends on CONFIG_HTTPD |
| help |
| This option allows scripts and executables to be invoked |
| when specific urls are requested. |
| |
| config CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV |
| bool " Support the REMOTE_PORT environment variable for CGI" |
| default n |
| depends on CONFIG_FEATURE_HTTPD_CGI |
| help |
| Use of this option can assist scripts in generating |
| references that contain a unique port number. |
| |
| config CONFIG_FEATURE_HTTPD_SET_CGI_VARS_TO_ENV |
| bool " Enable setting of CGI_varname=value environment vars for CGI" |
| default n |
| depends on CONFIG_FEATURE_HTTPD_CGI |
| help |
| This option parses POST or GET arguments from a form and |
| sets environment variables with their value. This simplifies |
| and speeds up CGI scripts. A form argument of foo=bar would |
| result in a script having the environment variable CGI_foo set |
| to 'bar'. In addition, this option sets a variable that |
| lists all the argument names. e.g. CGI_VARNAMES_="name1 name2". |
| |
| config CONFIG_FEATURE_HTTPD_ENCODE_URL_STR |
| bool " Enable the -e option for shell script CGI simplification." |
| default y |
| depends on CONFIG_HTTPD |
| help |
| After set, this option allows html encoding arbitrary |
| strings for display of the browser. Output goes to stdout. |
| For example, httpd -e "<Hello World>" as |
| "<Hello World>". |
| |
| config CONFIG_IFCONFIG |
| bool "ifconfig" |
| default n |
| help |
| Ifconfig is used to configure the kernel-resident network interfaces. |
| |
| config CONFIG_FEATURE_IFCONFIG_STATUS |
| bool " Enable status reporting output (+7k)" |
| default y |
| depends on CONFIG_IFCONFIG |
| help |
| If ifconfig is called with no arguments it will display the status |
| of the currently active interfaces. |
| |
| config CONFIG_FEATURE_IFCONFIG_SLIP |
| bool " Enable slip-specific options \"keepalive\" and \"outfill\"" |
| default n |
| depends on CONFIG_IFCONFIG |
| help |
| Allow "keepalive" and "outfill" support for SLIP. If you're not |
| planning on using serial lines, leave this unchecked. |
| |
| config CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
| bool " Enable options \"mem_start\", \"io_addr\", and \"irq\"" |
| default n |
| depends on CONFIG_IFCONFIG |
| help |
| Allow the start address for shared memory, start address for I/O, |
| and/or the interrupt line used by the specified device. |
| |
| config CONFIG_FEATURE_IFCONFIG_HW |
| bool " Enable option \"hw\" (ether only)" |
| default y |
| depends on CONFIG_IFCONFIG |
| help |
| Set the hardware address of this interface, if the device driver |
| supports this operation. Currently, we only support the 'ether' |
| class. |
| |
| config CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS |
| bool " Set the broadcast automatically" |
| default n |
| depends on CONFIG_IFCONFIG |
| help |
| Setting this will make ifconfig attempt to find the broadcast |
| automatically if the value '+' is used. |
| |
| config CONFIG_IFUPDOWN |
| bool "ifupdown" |
| default n |
| help |
| Activate or deactivate the specified interfaces. This applet makes |
| use of either "ifconfig" and "route" or the "ip" command to actually |
| configure network interfaces. Therefore, you will probably also want |
| to enable either CONFIG_IFCONFIG and CONFIG_ROUTE, or enable |
| CONFIG_FEATURE_IFUPDOWN_IP and the various CONFIG_IP options. Of |
| course you could use non-busybox versions of these programs, so |
| against my better judgement (since this will surely result in plenty |
| of support questions on the mailing list), I do not force you to |
| enable these additional options. It is up to you to supply either |
| "ifconfig" and "route" or the "ip" command, either via busybox or via |
| standalone utilities. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IP |
| bool " Use ip applet" |
| default n |
| depends on CONFIG_IFUPDOWN |
| help |
| Use the iproute "ip" command to implement "ifup" and "ifdown", rather |
| than the default of using the older 'ifconfig' and 'route' utilities. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN |
| bool " Use busybox ip applet" |
| default y |
| depends on CONFIG_FEATURE_IFUPDOWN_IP |
| select CONFIG_IP |
| select CONFIG_FEATURE_IP_ADDRESS |
| select CONFIG_FEATURE_IP_LINK |
| select CONFIG_FEATURE_IP_ROUTE |
| help |
| Use the busybox iproute "ip" applet to implement "ifupdown". |
| |
| If leave this disabled, you must install the full-blown iproute2 |
| utility or the "ifup" and "ifdown" applets will not work. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN |
| bool " Use busybox ifconfig and route applets" |
| default y |
| depends on CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP |
| select CONFIG_IFCONFIG |
| select CONFIG_ROUTE |
| help |
| Use the busybox iproute "ifconfig" and "route" applets to |
| implement the "ifup" and "ifdown" utilities. |
| |
| If leave this disabled, you must install the full-blown ifconfig |
| and route utilities, or the "ifup" and "ifdown" applets will not |
| work. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IPV4 |
| bool " Enable support for IPv4" |
| default y |
| depends on CONFIG_IFUPDOWN |
| help |
| If you want busybox to talk IPv4, leave this on. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IPV6 |
| bool " Enable support for IPv6" |
| default n |
| depends on CONFIG_IFUPDOWN |
| help |
| If you need support for IPv6, turn this option on. |
| |
| config CONFIG_FEATURE_IFUPDOWN_IPX |
| bool " Enable support for IPX" |
| default n |
| depends on CONFIG_IFUPDOWN |
| help |
| If this option is selected you can use busybox to work with IPX |
| networks. |
| |
| config CONFIG_FEATURE_IFUPDOWN_MAPPING |
| bool " Enable mapping support" |
| default n |
| depends on CONFIG_IFUPDOWN |
| help |
| This enables support for the "mapping" stanza, unless you have |
| a weird network setup you dont need it. |
| |
| config CONFIG_INETD |
| bool "inetd" |
| default n |
| help |
| Internet superserver daemon |
| |
| config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO |
| bool " Support echo service" |
| default y |
| depends on CONFIG_INETD |
| help |
| Echo received data internal inetd service |
| |
| config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD |
| bool " Support discard service" |
| default y |
| depends on CONFIG_INETD |
| help |
| Internet /dev/null internal inetd service |
| |
| config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME |
| bool " Support time service" |
| default y |
| depends on CONFIG_INETD |
| help |
| Return 32 bit time since 1900 internal inetd service |
| |
| config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME |
| bool " Support daytime service" |
| default y |
| depends on CONFIG_INETD |
| help |
| Return human-readable time internal inetd service |
| |
| config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN |
| bool " Support chargen service" |
| default y |
| depends on CONFIG_INETD |
| help |
| Familiar character generator internal inetd service |
| |
| |
| config CONFIG_IP |
| bool "ip" |
| default n |
| help |
| The "ip" applet is a TCP/IP interface configuration and routing |
| utility. You generally don't need "ip" to use busybox with |
| TCP/IP. |
| |
| if CONFIG_IP && CONFIG_IPADDR |
| config CONFIG_FEATURE_IP_ADDRESS |
| default y |
| comment " address (forced enabled for ipaddr)" |
| endif |
| if ! (CONFIG_IP && CONFIG_IPADDR) |
| config CONFIG_FEATURE_IP_ADDRESS |
| bool " address" |
| default y |
| depends on CONFIG_IP |
| help |
| Address manipulation support for the "ip" applet. |
| endif |
| |
| if CONFIG_IP && CONFIG_IPLINK |
| config CONFIG_FEATURE_IP_LINK |
| default y |
| comment " link (forced enabled for iplink)" |
| endif |
| if !(CONFIG_IP && CONFIG_IPLINK) |
| config CONFIG_FEATURE_IP_LINK |
| bool " link" |
| default y |
| depends on CONFIG_IP |
| help |
| Configure network devices with "ip". |
| endif |
| |
| if CONFIG_IP && CONFIG_IPROUTE |
| config CONFIG_FEATURE_IP_ROUTE |
| default y |
| comment " route (forced enabled for iproute)" |
| endif |
| if !(CONFIG_IP && CONFIG_IPROUTE) |
| config CONFIG_FEATURE_IP_ROUTE |
| bool " route" |
| default y |
| depends on CONFIG_IP |
| help |
| Add support for routing table management to "ip". |
| endif |
| |
| if CONFIG_IP && CONFIG_IPTUNNEL |
| config CONFIG_FEATURE_IP_TUNNEL |
| default y |
| comment " tunnel (forced enabled for iptunnel)" |
| endif |
| if !(CONFIG_IP && CONFIG_IPTUNNEL) |
| config CONFIG_FEATURE_IP_TUNNEL |
| bool " tunnel" |
| default n |
| depends on CONFIG_IP |
| help |
| Add support for tunneling commands to "ip". |
| endif |
| |
| config CONFIG_IPCALC |
| bool "ipcalc" |
| default n |
| help |
| ipcalc takes an IP address and netmask and calculates the |
| resulting broadcast, network, and host range. |
| |
| config CONFIG_FEATURE_IPCALC_FANCY |
| bool " Fancy IPCALC, more options, adds 1 kbyte" |
| default y |
| depends on CONFIG_IPCALC |
| help |
| Adds the options hostname, prefix and silent to the output of "ipcalc". |
| |
| config CONFIG_IPADDR |
| bool "ipaddr" |
| default n |
| help |
| Equivalent to selecting address support to "ip", above. |
| |
| config CONFIG_IPLINK |
| bool "iplink" |
| default n |
| help |
| Equivalent to selecting link support to "ip", above. |
| |
| config CONFIG_IPROUTE |
| bool "iproute" |
| default n |
| help |
| Equivalent to selecting route support to "ip", above. |
| |
| config CONFIG_IPTUNNEL |
| bool "iptunnel" |
| default n |
| help |
| Equivalent to selecting tunnel support to "ip", above. |
| |
| config CONFIG_NAMEIF |
| bool "nameif" |
| default n |
| help |
| nameif used to rename network interface by its MAC address. |
| Renamed interfaces MUST be in the down state. |
| It is possible to use file (default: /etc/mactab) |
| with list of new interface names and MACs. |
| Maximum interface name length: IF_NAMESIZE = 16 |
| File fields are sepatated by space or tab. |
| File format: |
| # Comment |
| new_interface_name XX:XX:XX:XX:XX:XX |
| |
| config CONFIG_NC |
| bool "nc" |
| default n |
| help |
| A simple Unix utility which reads and writes data across network |
| connections. |
| |
| config CONFIG_NETSTAT |
| bool "netstat" |
| default n |
| help |
| Netstat prints information about the Linux networking subsystem. |
| |
| config CONFIG_NSLOOKUP |
| bool "nslookup" |
| default n |
| help |
| Nslookup is a tool to query Internet name servers. |
| |
| config CONFIG_PING |
| bool "ping" |
| default n |
| help |
| Ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to |
| elicit an ICMP ECHO_RESPONSE from a host or gateway. |
| |
| config CONFIG_FEATURE_FANCY_PING |
| bool " Enable fancy ping output" |
| default y |
| depends on CONFIG_PING |
| help |
| Make the output from the ping applet include statistics, and at the |
| same time provide full support for ICMP packets. |
| |
| config CONFIG_PING6 |
| bool "ping6" |
| default n |
| depends on CONFIG_FEATURE_IPV6 |
| help |
| This will give you a ping that can talk IPv6. |
| |
| config CONFIG_FEATURE_FANCY_PING6 |
| bool " Enable fancy ping6 output" |
| default y |
| depends on CONFIG_PING6 |
| help |
| Make the output from the ping6 applet include statistics, and at the |
| same time provide full support for ICMP packets. |
| |
| config CONFIG_ROUTE |
| bool "route" |
| default n |
| help |
| Route displays or manipulates the kernel's IP routing tables. |
| |
| config CONFIG_TELNET |
| bool "telnet" |
| default n |
| help |
| Telnet is an interface to the TELNET protocol, but is also commonly |
| used to test other simple protocols. |
| |
| config CONFIG_FEATURE_TELNET_TTYPE |
| bool " Pass TERM type to remote host" |
| default y |
| depends on CONFIG_TELNET |
| help |
| Setting this option will forward the TERM environment variable to the |
| remote host you are connecting to. This is useful to make sure that |
| things like ANSI colors and other control sequences behave. |
| |
| config CONFIG_TELNETD |
| bool "telnetd" |
| default n |
| help |
| A daemon for the TELNET protocol, allowing you to log on to the host |
| running the daemon. Please keep in mind that the TELNET protocol |
| sends passwords in plain text. If you can't afford the space for |
| any SSH daemon and you trust your network, say 'y' here. |
| |
| config CONFIG_FEATURE_TELNETD_INETD |
| bool " Support call from inetd only" |
| default n |
| depends on CONFIG_TELNETD |
| help |
| Selecting this will make telnetd only callable from inetd, removing the |
| standalone support. |
| |
| config CONFIG_TFTP |
| bool "tftp" |
| default n |
| help |
| This enables the Tirvial File Transfer Protocol client program. TFTP |
| is usually used for simple, small transfers such as a root image |
| for a network-enabled bootloader. |
| |
| config CONFIG_FEATURE_TFTP_GET |
| bool " Enable \"get\" command" |
| default y |
| depends on CONFIG_TFTP |
| help |
| Add support for the GET command within the TFTP client. This allows |
| a client to retreive a file from a TFTP server. |
| |
| config CONFIG_FEATURE_TFTP_PUT |
| bool " Enable \"put\" command" |
| default y |
| depends on CONFIG_TFTP |
| help |
| Add support for the PUT command within the TFTP client. This allows |
| a client to transfer a file to a TFTP server. |
| |
| config CONFIG_FEATURE_TFTP_BLOCKSIZE |
| bool " Enable \"blocksize\" command" |
| default n |
| depends on CONFIG_TFTP |
| help |
| Allow the client to specify the desired block size for transfers. |
| |
| config CONFIG_FEATURE_TFTP_DEBUG |
| bool " Enable debug" |
| default n |
| depends on CONFIG_TFTP |
| help |
| Enable debug settings for tftp. This is useful if you're running |
| into problems with tftp as the protocol doesn't help you much when |
| you run into problems. |
| |
| config CONFIG_TRACEROUTE |
| bool "traceroute" |
| default n |
| help |
| Utility to trace the route of IP packets |
| |
| config CONFIG_FEATURE_TRACEROUTE_VERBOSE |
| bool " Enable verbose output" |
| default n |
| depends on CONFIG_TRACEROUTE |
| help |
| Add some verbosity to traceroute. This includes amongst other things |
| hostnames and ICMP response types. |
| |
| config CONFIG_VCONFIG |
| bool "vconfig" |
| default n |
| help |
| Creates, removes, and configures VLAN interfaces |
| |
| config CONFIG_WGET |
| bool "wget" |
| default n |
| help |
| Wget is a utility for non-interactive download of files from HTTP, |
| HTTPS, and FTP servers. |
| |
| config CONFIG_FEATURE_WGET_STATUSBAR |
| bool " Enable a nifty process meter (+2k)" |
| default y |
| depends on CONFIG_WGET |
| help |
| Enable the transfer progress bar for wget transfers. |
| |
| config CONFIG_FEATURE_WGET_AUTHENTICATION |
| bool " Enable HTTP authentication" |
| default y |
| depends on CONFIG_WGET |
| help |
| Support authenticated HTTP transfers. |
| |
| config CONFIG_FEATURE_WGET_IP6_LITERAL |
| bool " Enable IPv6 literal addresses" |
| default y |
| depends on CONFIG_WGET |
| help |
| Support IPv6 address literal notation in URLs. |
| |
| source networking/udhcp/Config.in |
| |
| endmenu |
| |