| /* vi: set sw=4 ts=4: */ |
| /* |
| * mkswap.c - set up a linux swap device |
| * |
| * (C) 1991 Linus Torvalds. This file may be redistributed as per |
| * the Linux copyright. |
| */ |
| |
| /* |
| * 20.12.91 - time began. Got VM working yesterday by doing this by hand. |
| * |
| * Usage: mkswap [-c] [-vN] [-f] device [size-in-blocks] |
| * |
| * -c for readability checking. (Use it unless you are SURE!) |
| * -vN for swap areas version N. (Only N=0,1 known today.) |
| * -f for forcing swap creation even if it would smash partition table. |
| * |
| * The device may be a block device or an image of one, but this isn't |
| * enforced (but it's not much fun on a character device :-). |
| * |
| * Patches from jaggy@purplet.demon.co.uk (Mike Jagdis) to make the |
| * size-in-blocks parameter optional added Wed Feb 8 10:33:43 1995. |
| * |
| * Version 1 swap area code (for kernel 2.1.117), aeb, 981010. |
| * |
| * Sparc fixes, jj@ultra.linux.cz (Jakub Jelinek), 981201 - mangled by aeb. |
| * V1_MAX_PAGES fixes, jj, 990325. |
| * |
| * 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org> |
| * - added Native Language Support |
| * |
| * from util-linux -- adapted for busybox by |
| * Erik Andersen <andersee@debian.org>. I ripped out Native Language |
| * Support, made some stuff smaller, and fitted for life in busybox. |
| * |
| */ |
| |
| #include "internal.h" |
| #include <stdio.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <stdlib.h> |
| #include <sys/ioctl.h> /* for _IO */ |
| #include <sys/utsname.h> |
| #include <sys/stat.h> |
| #include <asm/page.h> /* for PAGE_SIZE and PAGE_SHIFT */ |
| /* we also get PAGE_SIZE via getpagesize() */ |
| |
| |
| static const char mkswap_usage[] = |
| "mkswap [-c] [-v0|-v1] device [block-count]\n" |
| #ifndef BB_FEATURE_TRIVIAL_HELP |
| "\nPrepare a disk partition to be used as a swap partition.\n\n" |
| "Options:\n" "\t-c\t\tCheck for read-ability.\n" |
| "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" |
| "\t-v1\t\tMake version 1 swap [big!] (default for kernels > 2.1.117).\n" |
| |
| "\tblock-count\tNumber of block to use (default is entire partition).\n" |
| #endif |
| ; |
| |
| |
| #ifndef _IO |
| /* pre-1.3.45 */ |
| #define BLKGETSIZE 0x1260 |
| #else |
| /* same on i386, m68k, arm; different on alpha, mips, sparc, ppc */ |
| #define BLKGETSIZE _IO(0x12,96) |
| #endif |
| |
| static char *program_name = "mkswap"; |
| static char *device_name = NULL; |
| static int DEV = -1; |
| static long PAGES = 0; |
| static int check = 0; |
| static int badpages = 0; |
| static int version = -1; |
| |
| #define MAKE_VERSION(p,q,r) (65536*(p) + 256*(q) + (r)) |
| |
| static int linux_version_code(void) |
| { |
| struct utsname my_utsname; |
| int p, q, r; |
| |
| if (uname(&my_utsname) == 0) { |
| p = atoi(strtok(my_utsname.release, ".")); |
| q = atoi(strtok(NULL, ".")); |
| r = atoi(strtok(NULL, ".")); |
| return MAKE_VERSION(p, q, r); |
| } |
| return 0; |
| } |
| |
| /* |
| * The definition of the union swap_header uses the constant PAGE_SIZE. |
| * Unfortunately, on some architectures this depends on the hardware model, |
| * and can only be found at run time -- we use getpagesize(). |
| */ |
| |
| static int pagesize; |
| static int *signature_page; |
| |
| struct swap_header_v1 { |
| char bootbits[1024]; /* Space for disklabel etc. */ |
| unsigned int version; |
| unsigned int last_page; |
| unsigned int nr_badpages; |
| unsigned int padding[125]; |
| unsigned int badpages[1]; |
| } *p; |
| |
| static void init_signature_page() |
| { |
| pagesize = getpagesize(); |
| |
| #ifdef PAGE_SIZE |
| if (pagesize != PAGE_SIZE) |
| fprintf(stderr, "Assuming pages of size %d\n", pagesize); |
| #endif |
| signature_page = (int *) xmalloc(pagesize); |
| memset(signature_page, 0, pagesize); |
| p = (struct swap_header_v1 *) signature_page; |
| } |
| |
| static void write_signature(char *sig) |
| { |
| char *sp = (char *) signature_page; |
| |
| strncpy(sp + pagesize - 10, sig, 10); |
| } |
| |
| #define V0_MAX_PAGES (8 * (pagesize - 10)) |
| /* Before 2.2.0pre9 */ |
| #define V1_OLD_MAX_PAGES ((0x7fffffff / pagesize) - 1) |
| /* Since 2.2.0pre9: |
| error if nr of pages >= SWP_OFFSET(SWP_ENTRY(0,~0UL)) |
| with variations on |
| #define SWP_ENTRY(type,offset) (((type) << 1) | ((offset) << 8)) |
| #define SWP_OFFSET(entry) ((entry) >> 8) |
| on the various architectures. Below the result - yuk. |
| |
| Machine pagesize SWP_ENTRY SWP_OFFSET bound+1 oldbound+2 |
| i386 2^12 o<<8 e>>8 1<<24 1<<19 |
| mips 2^12 o<<15 e>>15 1<<17 1<<19 |
| alpha 2^13 o<<40 e>>40 1<<24 1<<18 |
| m68k 2^12 o<<12 e>>12 1<<20 1<<19 |
| sparc 2^{12,13} (o&0x3ffff)<<9 (e>>9)&0x3ffff 1<<18 1<<{19,18} |
| sparc64 2^13 o<<13 e>>13 1<<51 1<<18 |
| ppc 2^12 o<<8 e>>8 1<<24 1<<19 |
| armo 2^{13,14,15} o<<8 e>>8 1<<24 1<<{18,17,16} |
| armv 2^12 o<<9 e>>9 1<<23 1<<19 |
| |
| assuming that longs have 64 bits on alpha and sparc64 and 32 bits elsewhere. |
| |
| The bad part is that we need to know this since the kernel will |
| refuse a swap space if it is too large. |
| */ |
| /* patch from jj - why does this differ from the above? */ |
| #if defined(__alpha__) |
| #define V1_MAX_PAGES ((1 << 24) - 1) |
| #elif defined(__mips__) |
| #define V1_MAX_PAGES ((1 << 17) - 1) |
| #elif defined(__sparc_v9__) |
| #define V1_MAX_PAGES ((3 << 29) - 1) |
| #elif defined(__sparc__) |
| #define V1_MAX_PAGES (pagesize == 8192 ? ((3 << 29) - 1) : ((1 << 18) - 1)) |
| #else |
| #define V1_MAX_PAGES V1_OLD_MAX_PAGES |
| #endif |
| /* man page now says: |
| The maximum useful size of a swap area now depends on the architecture. |
| It is roughly 2GB on i386, PPC, m68k, ARM, 1GB on sparc, 512MB on mips, |
| 128GB on alpha and 3TB on sparc64. |
| */ |
| |
| #define MAX_BADPAGES ((pagesize-1024-128*sizeof(int)-10)/sizeof(int)) |
| |
| static void bit_set(unsigned int *addr, unsigned int nr) |
| { |
| unsigned int r, m; |
| |
| addr += nr / (8 * sizeof(int)); |
| |
| r = *addr; |
| m = 1 << (nr & (8 * sizeof(int) - 1)); |
| |
| *addr = r | m; |
| } |
| |
| static int bit_test_and_clear(unsigned int *addr, unsigned int nr) |
| { |
| unsigned int r, m; |
| |
| addr += nr / (8 * sizeof(int)); |
| |
| r = *addr; |
| m = 1 << (nr & (8 * sizeof(int) - 1)); |
| |
| *addr = r & ~m; |
| return (r & m) != 0; |
| } |
| |
| |
| void die(const char *str) |
| { |
| fprintf(stderr, "%s: %s\n", program_name, str); |
| exit(FALSE); |
| } |
| |
| void page_ok(int page) |
| { |
| if (version == 0) |
| bit_set(signature_page, page); |
| } |
| |
| void page_bad(int page) |
| { |
| if (version == 0) |
| bit_test_and_clear(signature_page, page); |
| else { |
| if (badpages == MAX_BADPAGES) |
| die("too many bad pages"); |
| p->badpages[badpages] = page; |
| } |
| badpages++; |
| } |
| |
| void check_blocks(void) |
| { |
| unsigned int current_page; |
| int do_seek = 1; |
| char *buffer; |
| |
| buffer = xmalloc(pagesize); |
| current_page = 0; |
| while (current_page < PAGES) { |
| if (!check) { |
| page_ok(current_page++); |
| continue; |
| } |
| if (do_seek && lseek(DEV, current_page * pagesize, SEEK_SET) != |
| current_page * pagesize) |
| die("seek failed in check_blocks"); |
| if ((do_seek = (pagesize != read(DEV, buffer, pagesize)))) { |
| page_bad(current_page++); |
| continue; |
| } |
| page_ok(current_page++); |
| } |
| if (badpages == 1) |
| printf("one bad page\n"); |
| else if (badpages > 1) |
| printf("%d bad pages\n", badpages); |
| } |
| |
| static long valid_offset(int fd, int offset) |
| { |
| char ch; |
| |
| if (lseek(fd, offset, 0) < 0) |
| return 0; |
| if (read(fd, &ch, 1) < 1) |
| return 0; |
| return 1; |
| } |
| |
| static int find_size(int fd) |
| { |
| unsigned int high, low; |
| |
| low = 0; |
| for (high = 1; high > 0 && valid_offset(fd, high); high *= 2) |
| low = high; |
| while (low < high - 1) { |
| const int mid = (low + high) / 2; |
| |
| if (valid_offset(fd, mid)) |
| low = mid; |
| else |
| high = mid; |
| } |
| return (low + 1); |
| } |
| |
| /* return size in pages, to avoid integer overflow */ |
| static long get_size(const char *file) |
| { |
| int fd; |
| long size; |
| |
| fd = open(file, O_RDONLY); |
| if (fd < 0) { |
| perror(file); |
| exit(1); |
| } |
| if (ioctl(fd, BLKGETSIZE, &size) >= 0) { |
| int sectors_per_page = pagesize / 512; |
| |
| size /= sectors_per_page; |
| } else { |
| size = find_size(fd) / pagesize; |
| } |
| close(fd); |
| return size; |
| } |
| |
| int mkswap_main(int argc, char **argv) |
| { |
| char *tmp; |
| struct stat statbuf; |
| int sz; |
| int maxpages; |
| int goodpages; |
| int offset; |
| int force = 0; |
| |
| if (argc && *argv) |
| program_name = *argv; |
| |
| init_signature_page(); /* get pagesize */ |
| |
| while (argc-- > 1) { |
| argv++; |
| if (argv[0][0] != '-') { |
| if (device_name) { |
| int blocks_per_page = pagesize / 1024; |
| |
| PAGES = strtol(argv[0], &tmp, 0) / blocks_per_page; |
| if (*tmp) |
| usage(mkswap_usage); |
| } else |
| device_name = argv[0]; |
| } else { |
| switch (argv[0][1]) { |
| case 'c': |
| check = 1; |
| break; |
| case 'f': |
| force = 1; |
| break; |
| case 'v': |
| version = atoi(argv[0] + 2); |
| break; |
| default: |
| usage(mkswap_usage); |
| } |
| } |
| } |
| if (!device_name) { |
| fprintf(stderr, |
| "%s: error: Nowhere to set up swap on?\n", program_name); |
| usage(mkswap_usage); |
| } |
| sz = get_size(device_name); |
| if (!PAGES) { |
| PAGES = sz; |
| } else if (PAGES > sz && !force) { |
| fprintf(stderr, |
| "%s: error: " |
| "size %ld is larger than device size %d\n", |
| program_name, |
| PAGES * (pagesize / 1024), sz * (pagesize / 1024)); |
| exit(FALSE); |
| } |
| |
| if (version == -1) { |
| if (PAGES <= V0_MAX_PAGES) |
| version = 0; |
| else if (linux_version_code() < MAKE_VERSION(2, 1, 117)) |
| version = 0; |
| else if (pagesize < 2048) |
| version = 0; |
| else |
| version = 1; |
| } |
| if (version != 0 && version != 1) { |
| fprintf(stderr, "%s: error: unknown version %d\n", |
| program_name, version); |
| usage(mkswap_usage); |
| } |
| if (PAGES < 10) { |
| fprintf(stderr, |
| "%s: error: swap area needs to be at least %ldkB\n", |
| program_name, (long) (10 * pagesize / 1024)); |
| usage(mkswap_usage); |
| } |
| #if 0 |
| maxpages = ((version == 0) ? V0_MAX_PAGES : V1_MAX_PAGES); |
| #else |
| if (!version) |
| maxpages = V0_MAX_PAGES; |
| else if (linux_version_code() >= MAKE_VERSION(2, 2, 1)) |
| maxpages = V1_MAX_PAGES; |
| else { |
| maxpages = V1_OLD_MAX_PAGES; |
| if (maxpages > V1_MAX_PAGES) |
| maxpages = V1_MAX_PAGES; |
| } |
| #endif |
| if (PAGES > maxpages) { |
| PAGES = maxpages; |
| fprintf(stderr, "%s: warning: truncating swap area to %ldkB\n", |
| program_name, PAGES * pagesize / 1024); |
| } |
| |
| DEV = open(device_name, O_RDWR); |
| if (DEV < 0 || fstat(DEV, &statbuf) < 0) { |
| perror(device_name); |
| exit(FALSE); |
| } |
| if (!S_ISBLK(statbuf.st_mode)) |
| check = 0; |
| else if (statbuf.st_rdev == 0x0300 || statbuf.st_rdev == 0x0340) |
| die("Will not try to make swapdevice on '%s'"); |
| |
| #ifdef __sparc__ |
| if (!force && version == 0) { |
| /* Don't overwrite partition table unless forced */ |
| unsigned char *buffer = (unsigned char *) signature_page; |
| unsigned short *q, sum; |
| |
| if (read(DEV, buffer, 512) != 512) |
| die("fatal: first page unreadable"); |
| if (buffer[508] == 0xDA && buffer[509] == 0xBE) { |
| q = (unsigned short *) (buffer + 510); |
| for (sum = 0; q >= (unsigned short *) buffer;) |
| sum ^= *q--; |
| if (!sum) { |
| fprintf(stderr, "\ |
| %s: Device '%s' contains a valid Sun disklabel.\n\ |
| This probably means creating v0 swap would destroy your partition table\n\ |
| No swap created. If you really want to create swap v0 on that device, use\n\ |
| the -f option to force it.\n", program_name, device_name); |
| exit(FALSE); |
| } |
| } |
| } |
| #endif |
| |
| if (version == 0 || check) |
| check_blocks(); |
| if (version == 0 && !bit_test_and_clear(signature_page, 0)) |
| die("fatal: first page unreadable"); |
| if (version == 1) { |
| p->version = version; |
| p->last_page = PAGES - 1; |
| p->nr_badpages = badpages; |
| } |
| |
| goodpages = PAGES - badpages - 1; |
| if (goodpages <= 0) |
| die("Unable to set up swap-space: unreadable"); |
| printf("Setting up swapspace version %d, size = %ld bytes\n", |
| version, (long) (goodpages * pagesize)); |
| write_signature((version == 0) ? "SWAP-SPACE" : "SWAPSPACE2"); |
| |
| offset = ((version == 0) ? 0 : 1024); |
| if (lseek(DEV, offset, SEEK_SET) != offset) |
| die("unable to rewind swap-device"); |
| if (write(DEV, (char *) signature_page + offset, pagesize - offset) |
| != pagesize - offset) |
| die("unable to write signature page"); |
| |
| /* |
| * A subsequent swapon() will fail if the signature |
| * is not actually on disk. (This is a kernel bug.) |
| */ |
| if (fsync(DEV)) |
| die("fsync failed"); |
| return(TRUE); |
| } |