| /* vi: set sw=4 ts=4: */ |
| /* |
| * Mini syslogd implementation for busybox |
| * |
| * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org> |
| * |
| * Copyright (C) 2000 by Karl M. Hegbloom <karlheg@debian.org> |
| * |
| * "circular buffer" Copyright (C) 2001 by Gennady Feldman <gfeldman@gena01.com> |
| * |
| * Maintainer: Gennady Feldman <gfeldman@gena01.com> as of Mar 12, 2001 |
| * |
| * Licensed under the GPL v2 or later, see the file LICENSE in this tarball. |
| */ |
| |
| #include "busybox.h" |
| #include <paths.h> |
| #include <sys/un.h> |
| |
| /* SYSLOG_NAMES defined to pull some extra junk from syslog.h */ |
| #define SYSLOG_NAMES |
| #include <sys/syslog.h> |
| #include <sys/uio.h> |
| |
| #define DEBUG 0 |
| |
| /* Path for the file where all log messages are written */ |
| static const char *logFilePath = "/var/log/messages"; |
| static int logFD = -1; |
| |
| /* This is not very useful, is bloat, and broken: |
| * can deadlock if alarmed to make MARK while writing to IPC buffer |
| * (semaphores are down but do_mark routine tries to down them again) */ |
| #ifdef SYSLOGD_MARK |
| /* interval between marks in seconds */ |
| static int markInterval = 20 * 60; |
| #endif |
| |
| /* level of messages to be locally logged */ |
| static int logLevel = 8; |
| |
| /* localhost's name */ |
| static char localHostName[64]; |
| |
| #if ENABLE_FEATURE_ROTATE_LOGFILE |
| /* max size of message file before being rotated */ |
| static unsigned logFileSize = 200 * 1024; |
| /* number of rotated message files */ |
| static unsigned logFileRotate = 1; |
| static unsigned curFileSize; |
| static smallint isRegular; |
| #endif |
| |
| #if ENABLE_FEATURE_REMOTE_LOG |
| #include <netinet/in.h> |
| /* udp socket for logging to remote host */ |
| static int remoteFD = -1; |
| static len_and_sockaddr* remoteAddr; |
| #endif |
| |
| /* We are using bb_common_bufsiz1 for buffering: */ |
| enum { MAX_READ = (BUFSIZ/6) & ~0xf }; |
| /* We recv into RECVBUF... (size: MAX_READ ~== BUFSIZ/6) */ |
| #define RECVBUF bb_common_bufsiz1 |
| /* ...then copy to PARSEBUF, escaping control chars */ |
| /* (can grow x2 max ~== BUFSIZ/3) */ |
| #define PARSEBUF (bb_common_bufsiz1 + MAX_READ) |
| /* ...then sprintf into PRINTBUF, adding timestamp (15 chars), |
| * host (64), fac.prio (20) to the message */ |
| /* (growth by: 15 + 64 + 20 + delims = ~110) */ |
| #define PRINTBUF (bb_common_bufsiz1 + 3*MAX_READ) |
| /* totals: BUFSIZ == BUFSIZ/6 + BUFSIZ/3 + (BUFSIZ/3+BUFSIZ/6) |
| * -- we have BUFSIZ/6 extra at the ent of PRINTBUF |
| * which covers needed ~110 extra bytes (and much more) */ |
| |
| |
| /* Options */ |
| enum { |
| OPTBIT_mark = 0, // -m |
| OPTBIT_nofork, // -n |
| OPTBIT_outfile, // -O |
| OPTBIT_loglevel, // -l |
| OPTBIT_small, // -S |
| USE_FEATURE_ROTATE_LOGFILE(OPTBIT_filesize ,) // -s |
| USE_FEATURE_ROTATE_LOGFILE(OPTBIT_rotatecnt ,) // -b |
| USE_FEATURE_REMOTE_LOG( OPTBIT_remote ,) // -R |
| USE_FEATURE_REMOTE_LOG( OPTBIT_localtoo ,) // -L |
| USE_FEATURE_IPC_SYSLOG( OPTBIT_circularlog,) // -C |
| |
| OPT_mark = 1 << OPTBIT_mark , |
| OPT_nofork = 1 << OPTBIT_nofork , |
| OPT_outfile = 1 << OPTBIT_outfile , |
| OPT_loglevel = 1 << OPTBIT_loglevel, |
| OPT_small = 1 << OPTBIT_small , |
| OPT_filesize = USE_FEATURE_ROTATE_LOGFILE((1 << OPTBIT_filesize )) + 0, |
| OPT_rotatecnt = USE_FEATURE_ROTATE_LOGFILE((1 << OPTBIT_rotatecnt )) + 0, |
| OPT_remotelog = USE_FEATURE_REMOTE_LOG( (1 << OPTBIT_remote )) + 0, |
| OPT_locallog = USE_FEATURE_REMOTE_LOG( (1 << OPTBIT_localtoo )) + 0, |
| OPT_circularlog = USE_FEATURE_IPC_SYSLOG( (1 << OPTBIT_circularlog)) + 0, |
| }; |
| #define OPTION_STR "m:nO:l:S" \ |
| USE_FEATURE_ROTATE_LOGFILE("s:" ) \ |
| USE_FEATURE_ROTATE_LOGFILE("b:" ) \ |
| USE_FEATURE_REMOTE_LOG( "R:" ) \ |
| USE_FEATURE_REMOTE_LOG( "L" ) \ |
| USE_FEATURE_IPC_SYSLOG( "C::") |
| #define OPTION_DECL *opt_m, *opt_l \ |
| USE_FEATURE_ROTATE_LOGFILE(,*opt_s) \ |
| USE_FEATURE_ROTATE_LOGFILE(,*opt_b) \ |
| USE_FEATURE_REMOTE_LOG( ,*opt_R) \ |
| USE_FEATURE_IPC_SYSLOG( ,*opt_C = NULL) |
| #define OPTION_PARAM &opt_m, &logFilePath, &opt_l \ |
| USE_FEATURE_ROTATE_LOGFILE(,&opt_s) \ |
| USE_FEATURE_ROTATE_LOGFILE(,&opt_b) \ |
| USE_FEATURE_REMOTE_LOG( ,&opt_R) \ |
| USE_FEATURE_IPC_SYSLOG( ,&opt_C) |
| |
| |
| /* circular buffer variables/structures */ |
| #if ENABLE_FEATURE_IPC_SYSLOG |
| |
| |
| #if CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE < 4 |
| #error Sorry, you must set the syslogd buffer size to at least 4KB. |
| #error Please check CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE |
| #endif |
| |
| #include <sys/ipc.h> |
| #include <sys/sem.h> |
| #include <sys/shm.h> |
| |
| /* our shared key */ |
| #define KEY_ID ((long)0x414e4547) /* "GENA" */ |
| |
| // Semaphore operation structures |
| static struct shbuf_ds { |
| int32_t size; // size of data written |
| int32_t head; // start of message list |
| int32_t tail; // end of message list |
| char data[1]; // data/messages |
| } *shbuf; // shared memory pointer |
| |
| static int shmid = -1; // ipc shared memory id |
| static int s_semid = -1; // ipc semaphore id |
| static int shm_size = ((CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE)*1024); // default shm size |
| |
| static void ipcsyslog_cleanup(void) |
| { |
| if (shmid != -1) { |
| shmdt(shbuf); |
| } |
| if (shmid != -1) { |
| shmctl(shmid, IPC_RMID, NULL); |
| } |
| if (s_semid != -1) { |
| semctl(s_semid, 0, IPC_RMID, 0); |
| } |
| } |
| |
| static void ipcsyslog_init(void) |
| { |
| if (DEBUG) |
| printf("shmget(%lx, %d,...)\n", KEY_ID, shm_size); |
| |
| shmid = shmget(KEY_ID, shm_size, IPC_CREAT | 1023); |
| if (shmid == -1) { |
| bb_perror_msg_and_die("shmget"); |
| } |
| |
| shbuf = shmat(shmid, NULL, 0); |
| if (!shbuf) { |
| bb_perror_msg_and_die("shmat"); |
| } |
| |
| shbuf->size = shm_size - offsetof(struct shbuf_ds, data); |
| shbuf->head = shbuf->tail = 0; |
| |
| // we'll trust the OS to set initial semval to 0 (let's hope) |
| s_semid = semget(KEY_ID, 2, IPC_CREAT | IPC_EXCL | 1023); |
| if (s_semid == -1) { |
| if (errno == EEXIST) { |
| s_semid = semget(KEY_ID, 2, 0); |
| if (s_semid != -1) |
| return; |
| } |
| bb_perror_msg_and_die("semget"); |
| } |
| } |
| |
| /* Write message to shared mem buffer */ |
| static void log_to_shmem(const char *msg, int len) |
| { |
| /* Why libc insists on these being rw? */ |
| static struct sembuf SMwup[1] = { {1, -1, IPC_NOWAIT} }; |
| static struct sembuf SMwdn[3] = { {0, 0}, {1, 0}, {1, +1} }; |
| |
| int old_tail, new_tail; |
| char *c; |
| |
| if (semop(s_semid, SMwdn, 3) == -1) { |
| bb_perror_msg_and_die("SMwdn"); |
| } |
| |
| /* Circular Buffer Algorithm: |
| * -------------------------- |
| * tail == position where to store next syslog message. |
| * head == position of next message to retrieve ("print"). |
| * if head == tail, there is no "unprinted" messages left. |
| * head is typically advanced by separate "reader" program, |
| * but if there isn't one, we have to do it ourself. |
| * messages are NUL-separated. |
| */ |
| len++; /* length with NUL included */ |
| again: |
| old_tail = shbuf->tail; |
| new_tail = old_tail + len; |
| if (new_tail < shbuf->size) { |
| /* No need to move head if shbuf->head <= old_tail, |
| * else... */ |
| if (old_tail < shbuf->head && shbuf->head <= new_tail) { |
| /* ...need to move head forward */ |
| c = memchr(shbuf->data + new_tail, '\0', |
| shbuf->size - new_tail); |
| if (!c) /* no NUL ahead of us, wrap around */ |
| c = memchr(shbuf->data, '\0', old_tail); |
| if (!c) { /* still nothing? point to this msg... */ |
| shbuf->head = old_tail; |
| } else { |
| /* convert pointer to offset + skip NUL */ |
| shbuf->head = c - shbuf->data + 1; |
| } |
| } |
| /* store message, set new tail */ |
| memcpy(shbuf->data + old_tail, msg, len); |
| shbuf->tail = new_tail; |
| } else { |
| /* we need to break up the message and wrap it around */ |
| /* k == available buffer space ahead of old tail */ |
| int k = shbuf->size - old_tail - 1; |
| if (shbuf->head > old_tail) { |
| /* we are going to overwrite head, need to |
| * move it out of the way */ |
| c = memchr(shbuf->data, '\0', old_tail); |
| if (!c) { /* nothing? point to this msg... */ |
| shbuf->head = old_tail; |
| } else { /* convert pointer to offset + skip NUL */ |
| shbuf->head = c - shbuf->data + 1; |
| } |
| } |
| /* copy what fits to the end of buffer, and repeat */ |
| memcpy(shbuf->data + old_tail, msg, k); |
| msg += k; |
| len -= k; |
| shbuf->tail = 0; |
| goto again; |
| } |
| if (semop(s_semid, SMwup, 1) == -1) { |
| bb_perror_msg_and_die("SMwup"); |
| } |
| if (DEBUG) |
| printf("head:%d tail:%d\n", shbuf->head, shbuf->tail); |
| } |
| #else |
| void ipcsyslog_cleanup(void); |
| void ipcsyslog_init(void); |
| void log_to_shmem(const char *msg); |
| #endif /* FEATURE_IPC_SYSLOG */ |
| |
| |
| /* Print a message to the log file. */ |
| static void log_locally(char *msg) |
| { |
| static time_t last; |
| struct flock fl; |
| int len = strlen(msg); |
| |
| #if ENABLE_FEATURE_IPC_SYSLOG |
| if ((option_mask32 & OPT_circularlog) && shbuf) { |
| log_to_shmem(msg, len); |
| return; |
| } |
| #endif |
| if (logFD >= 0) { |
| time_t cur; |
| time(&cur); |
| if (last != cur) { |
| last = cur; /* reopen log file every second */ |
| close(logFD); |
| goto reopen; |
| } |
| } else { |
| reopen: |
| logFD = device_open(logFilePath, O_WRONLY | O_CREAT |
| | O_NOCTTY | O_APPEND | O_NONBLOCK); |
| if (logFD < 0) { |
| /* cannot open logfile? - print to /dev/console then */ |
| int fd = device_open(_PATH_CONSOLE, O_WRONLY | O_NOCTTY | O_NONBLOCK); |
| if (fd < 0) |
| fd = 2; /* then stderr, dammit */ |
| full_write(fd, msg, len); |
| if (fd != 2) |
| close(fd); |
| return; |
| } |
| #if ENABLE_FEATURE_ROTATE_LOGFILE |
| { |
| struct stat statf; |
| |
| isRegular = (fstat(logFD, &statf) == 0 && (statf.st_mode & S_IFREG)); |
| /* bug (mostly harmless): can wrap around if file > 4gb */ |
| curFileSize = statf.st_size; |
| } |
| #endif |
| } |
| |
| fl.l_whence = SEEK_SET; |
| fl.l_start = 0; |
| fl.l_len = 1; |
| fl.l_type = F_WRLCK; |
| fcntl(logFD, F_SETLKW, &fl); |
| |
| #if ENABLE_FEATURE_ROTATE_LOGFILE |
| if (logFileSize && isRegular && curFileSize > logFileSize) { |
| if (logFileRotate) { /* always 0..99 */ |
| int i = strlen(logFilePath) + 3 + 1; |
| char oldFile[i]; |
| char newFile[i]; |
| i = logFileRotate - 1; |
| /* rename: f.8 -> f.9; f.7 -> f.8; ... */ |
| while (1) { |
| sprintf(newFile, "%s.%d", logFilePath, i); |
| if (i == 0) break; |
| sprintf(oldFile, "%s.%d", logFilePath, --i); |
| rename(oldFile, newFile); |
| } |
| /* newFile == "f.0" now */ |
| rename(logFilePath, newFile); |
| fl.l_type = F_UNLCK; |
| fcntl(logFD, F_SETLKW, &fl); |
| close(logFD); |
| goto reopen; |
| } |
| ftruncate(logFD, 0); |
| } |
| curFileSize += |
| #endif |
| full_write(logFD, msg, len); |
| fl.l_type = F_UNLCK; |
| fcntl(logFD, F_SETLKW, &fl); |
| } |
| |
| static void parse_fac_prio_20(int pri, char *res20) |
| { |
| CODE *c_pri, *c_fac; |
| |
| if (pri != 0) { |
| c_fac = facilitynames; |
| while (c_fac->c_name) { |
| if (c_fac->c_val != (LOG_FAC(pri) << 3)) { |
| c_fac++; continue; |
| } |
| /* facility is found, look for prio */ |
| c_pri = prioritynames; |
| while (c_pri->c_name) { |
| if (c_pri->c_val != LOG_PRI(pri)) { |
| c_pri++; continue; |
| } |
| snprintf(res20, 20, "%s.%s", |
| c_fac->c_name, c_pri->c_name); |
| return; |
| } |
| /* prio not found, bail out */ |
| break; |
| } |
| snprintf(res20, 20, "<%d>", pri); |
| } |
| } |
| |
| /* len parameter is used only for "is there a timestamp?" check. |
| * NB: some callers cheat and supply 0 when they know |
| * that there is no timestamp, short-cutting the test. */ |
| static void timestamp_and_log(int pri, char *msg, int len) |
| { |
| char *timestamp; |
| |
| if (len < 16 || msg[3] != ' ' || msg[6] != ' ' |
| || msg[9] != ':' || msg[12] != ':' || msg[15] != ' ' |
| ) { |
| time_t now; |
| time(&now); |
| timestamp = ctime(&now) + 4; |
| } else { |
| timestamp = msg; |
| msg += 16; |
| } |
| timestamp[15] = '\0'; |
| |
| /* Log message locally (to file or shared mem) */ |
| if (!ENABLE_FEATURE_REMOTE_LOG || (option_mask32 & OPT_locallog)) { |
| if (LOG_PRI(pri) < logLevel) { |
| if (option_mask32 & OPT_small) |
| sprintf(PRINTBUF, "%s %s\n", timestamp, msg); |
| else { |
| char res[20]; |
| parse_fac_prio_20(pri, res); |
| sprintf(PRINTBUF, "%s %s %s %s\n", timestamp, localHostName, res, msg); |
| } |
| log_locally(PRINTBUF); |
| } |
| } |
| } |
| |
| static void split_escape_and_log(char *tmpbuf, int len) |
| { |
| char *p = tmpbuf; |
| |
| tmpbuf += len; |
| while (p < tmpbuf) { |
| char c; |
| char *q = PARSEBUF; |
| int pri = (LOG_USER | LOG_NOTICE); |
| |
| if (*p == '<') { |
| /* Parse the magic priority number */ |
| pri = bb_strtou(p + 1, &p, 10); |
| if (*p == '>') p++; |
| if (pri & ~(LOG_FACMASK | LOG_PRIMASK)) { |
| pri = (LOG_USER | LOG_NOTICE); |
| } |
| } |
| |
| while ((c = *p++)) { |
| if (c == '\n') |
| c = ' '; |
| if (!(c & ~0x1f)) { |
| *q++ = '^'; |
| c += '@'; /* ^@, ^A, ^B... */ |
| } |
| *q++ = c; |
| } |
| *q = '\0'; |
| /* Now log it */ |
| timestamp_and_log(pri, PARSEBUF, q - PARSEBUF); |
| } |
| } |
| |
| static void quit_signal(int sig) |
| { |
| timestamp_and_log(LOG_SYSLOG | LOG_INFO, (char*)"syslogd exiting", 0); |
| puts("syslogd exiting"); |
| if (ENABLE_FEATURE_IPC_SYSLOG) |
| ipcsyslog_cleanup(); |
| exit(1); |
| } |
| |
| #ifdef SYSLOGD_MARK |
| static void do_mark(int sig) |
| { |
| if (markInterval) { |
| timestamp_and_log(LOG_SYSLOG | LOG_INFO, (char*)"-- MARK --", 0); |
| alarm(markInterval); |
| } |
| } |
| #endif |
| |
| static void do_syslogd(void) ATTRIBUTE_NORETURN; |
| static void do_syslogd(void) |
| { |
| struct sockaddr_un sunx; |
| int sock_fd; |
| fd_set fds; |
| char *dev_log_name; |
| |
| /* Set up signal handlers */ |
| signal(SIGINT, quit_signal); |
| signal(SIGTERM, quit_signal); |
| signal(SIGQUIT, quit_signal); |
| signal(SIGHUP, SIG_IGN); |
| signal(SIGCHLD, SIG_IGN); |
| #ifdef SIGCLD |
| signal(SIGCLD, SIG_IGN); |
| #endif |
| #ifdef SYSLOGD_MARK |
| signal(SIGALRM, do_mark); |
| alarm(markInterval); |
| #endif |
| |
| memset(&sunx, 0, sizeof(sunx)); |
| sunx.sun_family = AF_UNIX; |
| strcpy(sunx.sun_path, "/dev/log"); |
| |
| /* Unlink old /dev/log or object it points to. */ |
| /* (if it exists, bind will fail) */ |
| logmode = LOGMODE_NONE; |
| dev_log_name = xmalloc_readlink_or_warn("/dev/log"); |
| logmode = LOGMODE_STDIO; |
| if (dev_log_name) { |
| int fd = xopen(".", O_NONBLOCK); |
| xchdir("/dev"); |
| /* we do not check whether this is a link also */ |
| unlink(dev_log_name); |
| fchdir(fd); |
| close(fd); |
| safe_strncpy(sunx.sun_path, dev_log_name, sizeof(sunx.sun_path)); |
| free(dev_log_name); |
| } else { |
| unlink("/dev/log"); |
| } |
| |
| sock_fd = xsocket(AF_UNIX, SOCK_DGRAM, 0); |
| xbind(sock_fd, (struct sockaddr *) &sunx, sizeof(sunx)); |
| |
| if (chmod("/dev/log", 0666) < 0) { |
| bb_perror_msg_and_die("cannot set permission on /dev/log"); |
| } |
| if (ENABLE_FEATURE_IPC_SYSLOG && (option_mask32 & OPT_circularlog)) { |
| ipcsyslog_init(); |
| } |
| |
| timestamp_and_log(LOG_SYSLOG | LOG_INFO, |
| (char*)"syslogd started: BusyBox v" BB_VER, 0); |
| |
| for (;;) { |
| FD_ZERO(&fds); |
| FD_SET(sock_fd, &fds); |
| |
| if (select(sock_fd + 1, &fds, NULL, NULL, NULL) < 0) { |
| if (errno == EINTR) { |
| /* alarm may have happened */ |
| continue; |
| } |
| bb_perror_msg_and_die("select"); |
| } |
| |
| if (FD_ISSET(sock_fd, &fds)) { |
| int i; |
| i = recv(sock_fd, RECVBUF, MAX_READ - 1, 0); |
| if (i <= 0) |
| bb_perror_msg_and_die("UNIX socket error"); |
| /* TODO: maybe suppress duplicates? */ |
| #if ENABLE_FEATURE_REMOTE_LOG |
| /* We are not modifying log messages in any way before send */ |
| /* Remote site cannot trust _us_ anyway and need to do validation again */ |
| if (remoteAddr) { |
| if (-1 == remoteFD) { |
| remoteFD = socket(remoteAddr->sa.sa_family, SOCK_DGRAM, 0); |
| } |
| if (-1 != remoteFD) { |
| /* send message to remote logger, ignore possible error */ |
| sendto(remoteFD, RECVBUF, i, MSG_DONTWAIT, |
| &remoteAddr->sa, remoteAddr->len); |
| } |
| } |
| #endif |
| RECVBUF[i] = '\0'; |
| split_escape_and_log(RECVBUF, i); |
| } /* FD_ISSET() */ |
| } /* for */ |
| } |
| |
| int syslogd_main(int argc, char **argv); |
| int syslogd_main(int argc, char **argv) |
| { |
| char OPTION_DECL; |
| char *p; |
| |
| /* do normal option parsing */ |
| opt_complementary = "=0"; /* no non-option params */ |
| getopt32(argc, argv, OPTION_STR, OPTION_PARAM); |
| #ifdef SYSLOGD_MARK |
| if (option_mask32 & OPT_mark) // -m |
| markInterval = xatou_range(opt_m, 0, INT_MAX/60) * 60; |
| #endif |
| //if (option_mask32 & OPT_nofork) // -n |
| //if (option_mask32 & OPT_outfile) // -O |
| if (option_mask32 & OPT_loglevel) // -l |
| logLevel = xatou_range(opt_l, 1, 8); |
| //if (option_mask32 & OPT_small) // -S |
| #if ENABLE_FEATURE_ROTATE_LOGFILE |
| if (option_mask32 & OPT_filesize) // -s |
| logFileSize = xatou_range(opt_s, 0, INT_MAX/1024) * 1024; |
| if (option_mask32 & OPT_rotatecnt) // -b |
| logFileRotate = xatou_range(opt_b, 0, 99); |
| #endif |
| #if ENABLE_FEATURE_REMOTE_LOG |
| if (option_mask32 & OPT_remotelog) { // -R |
| remoteAddr = xhost2sockaddr(opt_R, 514); |
| } |
| //if (option_mask32 & OPT_locallog) // -L |
| #endif |
| #if ENABLE_FEATURE_IPC_SYSLOG |
| if (opt_C) // -Cn |
| shm_size = xatoul_range(opt_C, 4, INT_MAX/1024) * 1024; |
| #endif |
| |
| /* If they have not specified remote logging, then log locally */ |
| if (ENABLE_FEATURE_REMOTE_LOG && !(option_mask32 & OPT_remotelog)) |
| option_mask32 |= OPT_locallog; |
| |
| /* Store away localhost's name before the fork */ |
| gethostname(localHostName, sizeof(localHostName)); |
| p = strchr(localHostName, '.'); |
| if (p) { |
| *p = '\0'; |
| } |
| |
| if (!(option_mask32 & OPT_nofork)) { |
| #ifdef BB_NOMMU |
| vfork_daemon_rexec(0, 1, argc, argv, "-n"); |
| #else |
| bb_daemonize(); |
| #endif |
| } |
| umask(0); |
| do_syslogd(); |
| /* return EXIT_SUCCESS; */ |
| } |