| /* vi: set sw=4 ts=4: */ |
| /* |
| * mkfs.c - make a linux (minix) file-system. |
| * |
| * (C) 1991 Linus Torvalds. This file may be redistributed as per |
| * the Linux copyright. |
| */ |
| |
| /* |
| * DD.MM.YY |
| * |
| * 24.11.91 - Time began. Used the fsck sources to get started. |
| * |
| * 25.11.91 - Corrected some bugs. Added support for ".badblocks" |
| * The algorithm for ".badblocks" is a bit weird, but |
| * it should work. Oh, well. |
| * |
| * 25.01.92 - Added the -l option for getting the list of bad blocks |
| * out of a named file. (Dave Rivers, rivers@ponds.uucp) |
| * |
| * 28.02.92 - Added %-information when using -c. |
| * |
| * 28.02.93 - Added support for other namelengths than the original |
| * 14 characters so that I can test the new kernel routines.. |
| * |
| * 09.10.93 - Make exit status conform to that required by fsutil |
| * (Rik Faith, faith@cs.unc.edu) |
| * |
| * 31.10.93 - Added inode request feature, for backup floppies: use |
| * 32 inodes, for a news partition use more. |
| * (Scott Heavner, sdh@po.cwru.edu) |
| * |
| * 03.01.94 - Added support for file system valid flag. |
| * (Dr. Wettstein, greg%wind.uucp@plains.nodak.edu) |
| * |
| * 30.10.94 - added support for v2 filesystem |
| * (Andreas Schwab, schwab@issan.informatik.uni-dortmund.de) |
| * |
| * 09.11.94 - Added test to prevent overwrite of mounted fs adapted |
| * from Theodore Ts'o's (tytso@athena.mit.edu) mke2fs |
| * program. (Daniel Quinlan, quinlan@yggdrasil.com) |
| * |
| * 03.20.95 - Clear first 512 bytes of filesystem to make certain that |
| * the filesystem is not misidentified as a MS-DOS FAT filesystem. |
| * (Daniel Quinlan, quinlan@yggdrasil.com) |
| * |
| * 02.07.96 - Added small patch from Russell King to make the program a |
| * good deal more portable (janl@math.uio.no) |
| * |
| * Usage: mkfs [-c | -l filename ] [-v] [-nXX] [-iXX] device [size-in-blocks] |
| * |
| * -c for readability checking (SLOW!) |
| * -l for getting a list of bad blocks from a file. |
| * -n for namelength (currently the kernel only uses 14 or 30) |
| * -i for number of inodes |
| * -v for v2 filesystem |
| * |
| * The device may be a block device or a image of one, but this isn't |
| * enforced (but it's not much fun on a character device :-). |
| * |
| * Modified for BusyBox by Erik Andersen <andersen@debian.org> -- |
| * removed getopt based parser and added a hand rolled one. |
| */ |
| |
| #include "busybox.h" |
| #include <mntent.h> |
| |
| #define MINIX_ROOT_INO 1 |
| #define MINIX_LINK_MAX 250 |
| #define MINIX2_LINK_MAX 65530 |
| |
| #define MINIX_I_MAP_SLOTS 8 |
| #define MINIX_Z_MAP_SLOTS 64 |
| #define MINIX_SUPER_MAGIC 0x137F /* original minix fs */ |
| #define MINIX_SUPER_MAGIC2 0x138F /* minix fs, 30 char names */ |
| #define MINIX2_SUPER_MAGIC 0x2468 /* minix V2 fs */ |
| #define MINIX2_SUPER_MAGIC2 0x2478 /* minix V2 fs, 30 char names */ |
| #define MINIX_VALID_FS 0x0001 /* Clean fs. */ |
| #define MINIX_ERROR_FS 0x0002 /* fs has errors. */ |
| |
| #define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode))) |
| #define MINIX2_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix2_inode))) |
| |
| #define MINIX_V1 0x0001 /* original minix fs */ |
| #define MINIX_V2 0x0002 /* minix V2 fs */ |
| |
| #define INODE_VERSION(inode) inode->i_sb->u.minix_sb.s_version |
| |
| /* |
| * This is the original minix inode layout on disk. |
| * Note the 8-bit gid and atime and ctime. |
| */ |
| struct minix_inode { |
| uint16_t i_mode; |
| uint16_t i_uid; |
| uint32_t i_size; |
| uint32_t i_time; |
| uint8_t i_gid; |
| uint8_t i_nlinks; |
| uint16_t i_zone[9]; |
| }; |
| |
| /* |
| * The new minix inode has all the time entries, as well as |
| * long block numbers and a third indirect block (7+1+1+1 |
| * instead of 7+1+1). Also, some previously 8-bit values are |
| * now 16-bit. The inode is now 64 bytes instead of 32. |
| */ |
| struct minix2_inode { |
| uint16_t i_mode; |
| uint16_t i_nlinks; |
| uint16_t i_uid; |
| uint16_t i_gid; |
| uint32_t i_size; |
| uint32_t i_atime; |
| uint32_t i_mtime; |
| uint32_t i_ctime; |
| uint32_t i_zone[10]; |
| }; |
| |
| /* |
| * minix super-block data on disk |
| */ |
| struct minix_super_block { |
| uint16_t s_ninodes; |
| uint16_t s_nzones; |
| uint16_t s_imap_blocks; |
| uint16_t s_zmap_blocks; |
| uint16_t s_firstdatazone; |
| uint16_t s_log_zone_size; |
| uint32_t s_max_size; |
| uint16_t s_magic; |
| uint16_t s_state; |
| uint32_t s_zones; |
| }; |
| |
| struct minix_dir_entry { |
| uint16_t inode; |
| char name[0]; |
| }; |
| |
| #define NAME_MAX 255 /* # chars in a file name */ |
| |
| #define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode))) |
| |
| #define MINIX_VALID_FS 0x0001 /* Clean fs. */ |
| #define MINIX_ERROR_FS 0x0002 /* fs has errors. */ |
| |
| #define MINIX_SUPER_MAGIC 0x137F /* original minix fs */ |
| #define MINIX_SUPER_MAGIC2 0x138F /* minix fs, 30 char names */ |
| |
| #ifndef BLKGETSIZE |
| #define BLKGETSIZE _IO(0x12,96) /* return device size */ |
| #endif |
| |
| |
| #ifndef __linux__ |
| #define volatile |
| #endif |
| |
| #define MINIX_ROOT_INO 1 |
| #define MINIX_BAD_INO 2 |
| |
| #define TEST_BUFFER_BLOCKS 16 |
| #define MAX_GOOD_BLOCKS 512 |
| |
| #define UPPER(size,n) (((size)+((n)-1))/(n)) |
| #define INODE_SIZE (sizeof(struct minix_inode)) |
| #ifdef CONFIG_FEATURE_MINIX2 |
| #define INODE_SIZE2 (sizeof(struct minix2_inode)) |
| #define INODE_BLOCKS UPPER(INODES, (version2 ? MINIX2_INODES_PER_BLOCK \ |
| : MINIX_INODES_PER_BLOCK)) |
| #else |
| #define INODE_BLOCKS UPPER(INODES, (MINIX_INODES_PER_BLOCK)) |
| #endif |
| #define INODE_BUFFER_SIZE (INODE_BLOCKS * BLOCK_SIZE) |
| |
| #define BITS_PER_BLOCK (BLOCK_SIZE<<3) |
| |
| static char *device_name; |
| static int DEV = -1; |
| static uint32_t BLOCKS; |
| static int check; |
| static int badblocks; |
| static int namelen = 30; /* default (changed to 30, per Linus's |
| |
| suggestion, Sun Nov 21 08:05:07 1993) */ |
| static int dirsize = 32; |
| static int magic = MINIX_SUPER_MAGIC2; |
| static int version2; |
| |
| static char root_block[BLOCK_SIZE]; |
| |
| static char *inode_buffer; |
| |
| #define Inode (((struct minix_inode *) inode_buffer)-1) |
| #ifdef CONFIG_FEATURE_MINIX2 |
| #define Inode2 (((struct minix2_inode *) inode_buffer)-1) |
| #endif |
| static char super_block_buffer[BLOCK_SIZE]; |
| static char boot_block_buffer[512]; |
| |
| #define Super (*(struct minix_super_block *)super_block_buffer) |
| #define INODES (Super.s_ninodes) |
| #ifdef CONFIG_FEATURE_MINIX2 |
| #define ZONES (version2 ? Super.s_zones : Super.s_nzones) |
| #else |
| #define ZONES (Super.s_nzones) |
| #endif |
| #define IMAPS (Super.s_imap_blocks) |
| #define ZMAPS (Super.s_zmap_blocks) |
| #define FIRSTZONE (Super.s_firstdatazone) |
| #define ZONESIZE (Super.s_log_zone_size) |
| #define MAXSIZE (Super.s_max_size) |
| #define MAGIC (Super.s_magic) |
| #define NORM_FIRSTZONE (2+IMAPS+ZMAPS+INODE_BLOCKS) |
| |
| static char *inode_map; |
| static char *zone_map; |
| |
| static unsigned short good_blocks_table[MAX_GOOD_BLOCKS]; |
| static int used_good_blocks; |
| static unsigned long req_nr_inodes; |
| |
| static int bit(char * a,unsigned int i) |
| { |
| return (a[i >> 3] & (1<<(i & 7))) != 0; |
| } |
| #define inode_in_use(x) (bit(inode_map,(x))) |
| #define zone_in_use(x) (bit(zone_map,(x)-FIRSTZONE+1)) |
| |
| #define mark_inode(x) (setbit(inode_map,(x))) |
| #define unmark_inode(x) (clrbit(inode_map,(x))) |
| |
| #define mark_zone(x) (setbit(zone_map,(x)-FIRSTZONE+1)) |
| #define unmark_zone(x) (clrbit(zone_map,(x)-FIRSTZONE+1)) |
| |
| /* |
| * Check to make certain that our new filesystem won't be created on |
| * an already mounted partition. Code adapted from mke2fs, Copyright |
| * (C) 1994 Theodore Ts'o. Also licensed under GPL. |
| */ |
| static void check_mount(void) |
| { |
| FILE *f; |
| struct mntent *mnt; |
| |
| if ((f = setmntent(MOUNTED, "r")) == NULL) |
| return; |
| while ((mnt = getmntent(f)) != NULL) |
| if (strcmp(device_name, mnt->mnt_fsname) == 0) |
| break; |
| endmntent(f); |
| if (!mnt) |
| return; |
| |
| bb_error_msg_and_die("%s is mounted; will not make a filesystem here!", device_name); |
| } |
| |
| static long valid_offset(int fd, int offset) |
| { |
| char ch; |
| |
| if (lseek(fd, offset, 0) < 0) |
| return 0; |
| if (read(fd, &ch, 1) < 1) |
| return 0; |
| return 1; |
| } |
| |
| static int count_blocks(int fd) |
| { |
| int high, low; |
| |
| low = 0; |
| for (high = 1; valid_offset(fd, high); high *= 2) |
| low = high; |
| while (low < high - 1) { |
| const int mid = (low + high) / 2; |
| |
| if (valid_offset(fd, mid)) |
| low = mid; |
| else |
| high = mid; |
| } |
| valid_offset(fd, 0); |
| return (low + 1); |
| } |
| |
| static int get_size(const char *file) |
| { |
| int fd; |
| long size; |
| |
| fd = xopen(file, O_RDWR); |
| if (ioctl(fd, BLKGETSIZE, &size) >= 0) { |
| close(fd); |
| return (size * 512); |
| } |
| |
| size = count_blocks(fd); |
| close(fd); |
| return size; |
| } |
| |
| static void write_tables(void) |
| { |
| /* Mark the super block valid. */ |
| Super.s_state |= MINIX_VALID_FS; |
| Super.s_state &= ~MINIX_ERROR_FS; |
| |
| if (lseek(DEV, 0, SEEK_SET)) |
| bb_error_msg_and_die("seek to boot block failed in write_tables"); |
| if (512 != write(DEV, boot_block_buffer, 512)) |
| bb_error_msg_and_die("unable to clear boot sector"); |
| if (BLOCK_SIZE != lseek(DEV, BLOCK_SIZE, SEEK_SET)) |
| bb_error_msg_and_die("seek failed in write_tables"); |
| if (BLOCK_SIZE != write(DEV, super_block_buffer, BLOCK_SIZE)) |
| bb_error_msg_and_die("unable to write super-block"); |
| if (IMAPS * BLOCK_SIZE != write(DEV, inode_map, IMAPS * BLOCK_SIZE)) |
| bb_error_msg_and_die("unable to write inode map"); |
| if (ZMAPS * BLOCK_SIZE != write(DEV, zone_map, ZMAPS * BLOCK_SIZE)) |
| bb_error_msg_and_die("unable to write zone map"); |
| if (INODE_BUFFER_SIZE != write(DEV, inode_buffer, INODE_BUFFER_SIZE)) |
| bb_error_msg_and_die("unable to write inodes"); |
| |
| } |
| |
| static void write_block(int blk, char *buffer) |
| { |
| if (blk * BLOCK_SIZE != lseek(DEV, blk * BLOCK_SIZE, SEEK_SET)) |
| bb_error_msg_and_die("seek failed in write_block"); |
| if (BLOCK_SIZE != write(DEV, buffer, BLOCK_SIZE)) |
| bb_error_msg_and_die("write failed in write_block"); |
| } |
| |
| static int get_free_block(void) |
| { |
| int blk; |
| |
| if (used_good_blocks + 1 >= MAX_GOOD_BLOCKS) |
| bb_error_msg_and_die("too many bad blocks"); |
| if (used_good_blocks) |
| blk = good_blocks_table[used_good_blocks - 1] + 1; |
| else |
| blk = FIRSTZONE; |
| while (blk < ZONES && zone_in_use(blk)) |
| blk++; |
| if (blk >= ZONES) |
| bb_error_msg_and_die("not enough good blocks"); |
| good_blocks_table[used_good_blocks] = blk; |
| used_good_blocks++; |
| return blk; |
| } |
| |
| static void mark_good_blocks(void) |
| { |
| int blk; |
| |
| for (blk = 0; blk < used_good_blocks; blk++) |
| mark_zone(good_blocks_table[blk]); |
| } |
| |
| static int next(int zone) |
| { |
| if (!zone) |
| zone = FIRSTZONE - 1; |
| while (++zone < ZONES) |
| if (zone_in_use(zone)) |
| return zone; |
| return 0; |
| } |
| |
| static void make_bad_inode(void) |
| { |
| struct minix_inode *inode = &Inode[MINIX_BAD_INO]; |
| int i, j, zone; |
| int ind = 0, dind = 0; |
| unsigned short ind_block[BLOCK_SIZE >> 1]; |
| unsigned short dind_block[BLOCK_SIZE >> 1]; |
| |
| #define NEXT_BAD (zone = next(zone)) |
| |
| if (!badblocks) |
| return; |
| mark_inode(MINIX_BAD_INO); |
| inode->i_nlinks = 1; |
| inode->i_time = time(NULL); |
| inode->i_mode = S_IFREG + 0000; |
| inode->i_size = badblocks * BLOCK_SIZE; |
| zone = next(0); |
| for (i = 0; i < 7; i++) { |
| inode->i_zone[i] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| inode->i_zone[7] = ind = get_free_block(); |
| memset(ind_block, 0, BLOCK_SIZE); |
| for (i = 0; i < 512; i++) { |
| ind_block[i] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| inode->i_zone[8] = dind = get_free_block(); |
| memset(dind_block, 0, BLOCK_SIZE); |
| for (i = 0; i < 512; i++) { |
| write_block(ind, (char *) ind_block); |
| dind_block[i] = ind = get_free_block(); |
| memset(ind_block, 0, BLOCK_SIZE); |
| for (j = 0; j < 512; j++) { |
| ind_block[j] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| } |
| bb_error_msg_and_die("too many bad blocks"); |
| end_bad: |
| if (ind) |
| write_block(ind, (char *) ind_block); |
| if (dind) |
| write_block(dind, (char *) dind_block); |
| } |
| |
| #ifdef CONFIG_FEATURE_MINIX2 |
| static void make_bad_inode2(void) |
| { |
| struct minix2_inode *inode = &Inode2[MINIX_BAD_INO]; |
| int i, j, zone; |
| int ind = 0, dind = 0; |
| unsigned long ind_block[BLOCK_SIZE >> 2]; |
| unsigned long dind_block[BLOCK_SIZE >> 2]; |
| |
| if (!badblocks) |
| return; |
| mark_inode(MINIX_BAD_INO); |
| inode->i_nlinks = 1; |
| inode->i_atime = inode->i_mtime = inode->i_ctime = time(NULL); |
| inode->i_mode = S_IFREG + 0000; |
| inode->i_size = badblocks * BLOCK_SIZE; |
| zone = next(0); |
| for (i = 0; i < 7; i++) { |
| inode->i_zone[i] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| inode->i_zone[7] = ind = get_free_block(); |
| memset(ind_block, 0, BLOCK_SIZE); |
| for (i = 0; i < 256; i++) { |
| ind_block[i] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| inode->i_zone[8] = dind = get_free_block(); |
| memset(dind_block, 0, BLOCK_SIZE); |
| for (i = 0; i < 256; i++) { |
| write_block(ind, (char *) ind_block); |
| dind_block[i] = ind = get_free_block(); |
| memset(ind_block, 0, BLOCK_SIZE); |
| for (j = 0; j < 256; j++) { |
| ind_block[j] = zone; |
| if (!NEXT_BAD) |
| goto end_bad; |
| } |
| } |
| /* Could make triple indirect block here */ |
| bb_error_msg_and_die("too many bad blocks"); |
| end_bad: |
| if (ind) |
| write_block(ind, (char *) ind_block); |
| if (dind) |
| write_block(dind, (char *) dind_block); |
| } |
| #endif |
| |
| static void make_root_inode(void) |
| { |
| struct minix_inode *inode = &Inode[MINIX_ROOT_INO]; |
| |
| mark_inode(MINIX_ROOT_INO); |
| inode->i_zone[0] = get_free_block(); |
| inode->i_nlinks = 2; |
| inode->i_time = time(NULL); |
| if (badblocks) |
| inode->i_size = 3 * dirsize; |
| else { |
| root_block[2 * dirsize] = '\0'; |
| root_block[2 * dirsize + 1] = '\0'; |
| inode->i_size = 2 * dirsize; |
| } |
| inode->i_mode = S_IFDIR + 0755; |
| inode->i_uid = getuid(); |
| if (inode->i_uid) |
| inode->i_gid = getgid(); |
| write_block(inode->i_zone[0], root_block); |
| } |
| |
| #ifdef CONFIG_FEATURE_MINIX2 |
| static void make_root_inode2(void) |
| { |
| struct minix2_inode *inode = &Inode2[MINIX_ROOT_INO]; |
| |
| mark_inode(MINIX_ROOT_INO); |
| inode->i_zone[0] = get_free_block(); |
| inode->i_nlinks = 2; |
| inode->i_atime = inode->i_mtime = inode->i_ctime = time(NULL); |
| if (badblocks) |
| inode->i_size = 3 * dirsize; |
| else { |
| root_block[2 * dirsize] = '\0'; |
| root_block[2 * dirsize + 1] = '\0'; |
| inode->i_size = 2 * dirsize; |
| } |
| inode->i_mode = S_IFDIR + 0755; |
| inode->i_uid = getuid(); |
| if (inode->i_uid) |
| inode->i_gid = getgid(); |
| write_block(inode->i_zone[0], root_block); |
| } |
| #endif |
| |
| static void setup_tables(void) |
| { |
| int i; |
| unsigned long inodes; |
| |
| memset(super_block_buffer, 0, BLOCK_SIZE); |
| memset(boot_block_buffer, 0, 512); |
| MAGIC = magic; |
| ZONESIZE = 0; |
| MAXSIZE = version2 ? 0x7fffffff : (7 + 512 + 512 * 512) * 1024; |
| #ifdef CONFIG_FEATURE_MINIX2 |
| if (version2) { |
| Super.s_zones = BLOCKS; |
| } else |
| #endif |
| Super.s_nzones = BLOCKS; |
| |
| /* some magic nrs: 1 inode / 3 blocks */ |
| if (req_nr_inodes == 0) |
| inodes = BLOCKS / 3; |
| else |
| inodes = req_nr_inodes; |
| /* Round up inode count to fill block size */ |
| #ifdef CONFIG_FEATURE_MINIX2 |
| if (version2) |
| inodes = ((inodes + MINIX2_INODES_PER_BLOCK - 1) & |
| ~(MINIX2_INODES_PER_BLOCK - 1)); |
| else |
| #endif |
| inodes = ((inodes + MINIX_INODES_PER_BLOCK - 1) & |
| ~(MINIX_INODES_PER_BLOCK - 1)); |
| if (inodes > 65535) |
| inodes = 65535; |
| INODES = inodes; |
| IMAPS = UPPER(INODES + 1, BITS_PER_BLOCK); |
| ZMAPS = 0; |
| i = 0; |
| while (ZMAPS != |
| UPPER(BLOCKS - (2 + IMAPS + ZMAPS + INODE_BLOCKS) + 1, |
| BITS_PER_BLOCK) && i < 1000) { |
| ZMAPS = |
| UPPER(BLOCKS - (2 + IMAPS + ZMAPS + INODE_BLOCKS) + 1, |
| BITS_PER_BLOCK); |
| i++; |
| } |
| /* Real bad hack but overwise mkfs.minix can be thrown |
| * in infinite loop... |
| * try: |
| * dd if=/dev/zero of=test.fs count=10 bs=1024 |
| * /sbin/mkfs.minix -i 200 test.fs |
| * */ |
| if (i >= 999) { |
| bb_error_msg_and_die("unable to allocate buffers for maps"); |
| } |
| FIRSTZONE = NORM_FIRSTZONE; |
| inode_map = xmalloc(IMAPS * BLOCK_SIZE); |
| zone_map = xmalloc(ZMAPS * BLOCK_SIZE); |
| memset(inode_map, 0xff, IMAPS * BLOCK_SIZE); |
| memset(zone_map, 0xff, ZMAPS * BLOCK_SIZE); |
| for (i = FIRSTZONE; i < ZONES; i++) |
| unmark_zone(i); |
| for (i = MINIX_ROOT_INO; i <= INODES; i++) |
| unmark_inode(i); |
| inode_buffer = xmalloc(INODE_BUFFER_SIZE); |
| memset(inode_buffer, 0, INODE_BUFFER_SIZE); |
| printf("%ld inodes\n", (long)INODES); |
| printf("%ld blocks\n", (long)ZONES); |
| printf("Firstdatazone=%ld (%ld)\n", (long)FIRSTZONE, (long)NORM_FIRSTZONE); |
| printf("Zonesize=%d\n", BLOCK_SIZE << ZONESIZE); |
| printf("Maxsize=%ld\n\n", (long)MAXSIZE); |
| } |
| |
| /* |
| * Perform a test of a block; return the number of |
| * blocks readable/writable. |
| */ |
| static long do_check(char *buffer, int try, unsigned int current_block) |
| { |
| long got; |
| |
| /* Seek to the correct loc. */ |
| if (lseek(DEV, current_block * BLOCK_SIZE, SEEK_SET) != |
| current_block * BLOCK_SIZE) { |
| bb_error_msg_and_die("seek failed during testing of blocks"); |
| } |
| |
| |
| /* Try the read */ |
| got = read(DEV, buffer, try * BLOCK_SIZE); |
| if (got < 0) |
| got = 0; |
| if (got & (BLOCK_SIZE - 1)) { |
| printf("Weird values in do_check: probably bugs\n"); |
| } |
| got /= BLOCK_SIZE; |
| return got; |
| } |
| |
| static unsigned int currently_testing; |
| |
| static void alarm_intr(int alnum) |
| { |
| if (currently_testing >= ZONES) |
| return; |
| signal(SIGALRM, alarm_intr); |
| alarm(5); |
| if (!currently_testing) |
| return; |
| printf("%d ...", currently_testing); |
| fflush(stdout); |
| } |
| |
| static void check_blocks(void) |
| { |
| int try, got; |
| static char buffer[BLOCK_SIZE * TEST_BUFFER_BLOCKS]; |
| |
| currently_testing = 0; |
| signal(SIGALRM, alarm_intr); |
| alarm(5); |
| while (currently_testing < ZONES) { |
| if (lseek(DEV, currently_testing * BLOCK_SIZE, SEEK_SET) != |
| currently_testing * BLOCK_SIZE) |
| bb_error_msg_and_die("seek failed in check_blocks"); |
| try = TEST_BUFFER_BLOCKS; |
| if (currently_testing + try > ZONES) |
| try = ZONES - currently_testing; |
| got = do_check(buffer, try, currently_testing); |
| currently_testing += got; |
| if (got == try) |
| continue; |
| if (currently_testing < FIRSTZONE) |
| bb_error_msg_and_die("bad blocks before data-area: cannot make fs"); |
| mark_zone(currently_testing); |
| badblocks++; |
| currently_testing++; |
| } |
| if (badblocks > 1) |
| printf("%d bad blocks\n", badblocks); |
| else if (badblocks == 1) |
| printf("one bad block\n"); |
| } |
| |
| static void get_list_blocks(char *filename) |
| { |
| FILE *listfile; |
| unsigned long blockno; |
| |
| listfile = xfopen(filename, "r"); |
| while (!feof(listfile)) { |
| fscanf(listfile, "%ld\n", &blockno); |
| mark_zone(blockno); |
| badblocks++; |
| } |
| if (badblocks > 1) |
| printf("%d bad blocks\n", badblocks); |
| else if (badblocks == 1) |
| printf("one bad block\n"); |
| } |
| |
| int mkfs_minix_main(int argc, char **argv) |
| { |
| int i=1; |
| char *tmp; |
| struct stat statbuf; |
| char *listfile = NULL; |
| int stopIt=FALSE; |
| |
| if (INODE_SIZE * MINIX_INODES_PER_BLOCK != BLOCK_SIZE) |
| bb_error_msg_and_die("bad inode size"); |
| #ifdef CONFIG_FEATURE_MINIX2 |
| if (INODE_SIZE2 * MINIX2_INODES_PER_BLOCK != BLOCK_SIZE) |
| bb_error_msg_and_die("bad inode size"); |
| #endif |
| |
| /* Parse options */ |
| argv++; |
| while (--argc >= 0 && *argv && **argv) { |
| if (**argv == '-') { |
| stopIt=FALSE; |
| while (i > 0 && *++(*argv) && stopIt==FALSE) { |
| switch (**argv) { |
| case 'c': |
| check = 1; |
| break; |
| case 'i': |
| { |
| char *cp=NULL; |
| if (*(*argv+1) != 0) { |
| cp = ++(*argv); |
| } else { |
| if (--argc == 0) { |
| goto goodbye; |
| } |
| cp = *(++argv); |
| } |
| req_nr_inodes = strtoul(cp, &tmp, 0); |
| if (*tmp) |
| bb_show_usage(); |
| stopIt=TRUE; |
| break; |
| } |
| case 'l': |
| if (--argc == 0) { |
| goto goodbye; |
| } |
| listfile = *(++argv); |
| break; |
| case 'n': |
| { |
| char *cp=NULL; |
| |
| if (*(*argv+1) != 0) { |
| cp = ++(*argv); |
| } else { |
| if (--argc == 0) { |
| goto goodbye; |
| } |
| cp = *(++argv); |
| } |
| i = strtoul(cp, &tmp, 0); |
| if (*tmp) |
| bb_show_usage(); |
| if (i == 14) |
| magic = MINIX_SUPER_MAGIC; |
| else if (i == 30) |
| magic = MINIX_SUPER_MAGIC2; |
| else |
| bb_show_usage(); |
| namelen = i; |
| dirsize = i + 2; |
| stopIt=TRUE; |
| break; |
| } |
| case 'v': |
| #ifdef CONFIG_FEATURE_MINIX2 |
| version2 = 1; |
| #else |
| bb_error_msg("%s: not compiled with minix v2 support", |
| device_name); |
| exit(-1); |
| #endif |
| break; |
| case '-': |
| case 'h': |
| default: |
| goodbye: |
| bb_show_usage(); |
| } |
| } |
| } else { |
| if (device_name == NULL) |
| device_name = *argv; |
| else if (BLOCKS == 0) |
| BLOCKS = strtol(*argv, &tmp, 0); |
| else { |
| goto goodbye; |
| } |
| } |
| argv++; |
| } |
| |
| if (device_name && !BLOCKS) |
| BLOCKS = get_size(device_name) / 1024; |
| if (!device_name || BLOCKS < 10) { |
| bb_show_usage(); |
| } |
| #ifdef CONFIG_FEATURE_MINIX2 |
| if (version2) { |
| if (namelen == 14) |
| magic = MINIX2_SUPER_MAGIC; |
| else |
| magic = MINIX2_SUPER_MAGIC2; |
| } else |
| #endif |
| if (BLOCKS > 65535) |
| BLOCKS = 65535; |
| check_mount(); /* is it already mounted? */ |
| tmp = root_block; |
| *(short *) tmp = 1; |
| strcpy(tmp + 2, "."); |
| tmp += dirsize; |
| *(short *) tmp = 1; |
| strcpy(tmp + 2, ".."); |
| tmp += dirsize; |
| *(short *) tmp = 2; |
| strcpy(tmp + 2, ".badblocks"); |
| DEV = xopen(device_name, O_RDWR); |
| if (fstat(DEV, &statbuf) < 0) |
| bb_error_msg_and_die("unable to stat %s", device_name); |
| if (!S_ISBLK(statbuf.st_mode)) |
| check = 0; |
| else if (statbuf.st_rdev == 0x0300 || statbuf.st_rdev == 0x0340) |
| bb_error_msg_and_die("will not try to make filesystem on '%s'", device_name); |
| setup_tables(); |
| if (check) |
| check_blocks(); |
| else if (listfile) |
| get_list_blocks(listfile); |
| #ifdef CONFIG_FEATURE_MINIX2 |
| if (version2) { |
| make_root_inode2(); |
| make_bad_inode2(); |
| } else |
| #endif |
| { |
| make_root_inode(); |
| make_bad_inode(); |
| } |
| mark_good_blocks(); |
| write_tables(); |
| return 0; |
| |
| } |