| /* |
| * Copyright (c) 2012 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| // This sub-API supports the following functionalities: |
| // - Setting send and receive codecs. |
| // - Codec specific settings. |
| // - Key frame signaling. |
| // - Stream management settings. |
| |
| #ifndef WEBRTC_VIDEO_ENGINE_INCLUDE_VIE_CODEC_H_ |
| #define WEBRTC_VIDEO_ENGINE_INCLUDE_VIE_CODEC_H_ |
| |
| #include "webrtc/common_types.h" |
| |
| namespace webrtc { |
| |
| class VideoEngine; |
| struct VideoCodec; |
| |
| // This class declares an abstract interface for a user defined observer. It is |
| // up to the VideoEngine user to implement a derived class which implements the |
| // observer class. The observer is registered using RegisterEncoderObserver() |
| // and deregistered using DeregisterEncoderObserver(). |
| class WEBRTC_DLLEXPORT ViEEncoderObserver { |
| public: |
| // This method is called once per second with the current encoded frame rate |
| // and bit rate. |
| virtual void OutgoingRate(const int video_channel, |
| const unsigned int framerate, |
| const unsigned int bitrate) = 0; |
| protected: |
| virtual ~ViEEncoderObserver() {} |
| }; |
| |
| // This class declares an abstract interface for a user defined observer. It is |
| // up to the VideoEngine user to implement a derived class which implements the |
| // observer class. The observer is registered using RegisterDecoderObserver() |
| // and deregistered using DeregisterDecoderObserver(). |
| class WEBRTC_DLLEXPORT ViEDecoderObserver { |
| public: |
| // This method is called when a new incoming stream is detected, normally |
| // triggered by a new incoming SSRC or payload type. |
| virtual void IncomingCodecChanged(const int video_channel, |
| const VideoCodec& video_codec) = 0; |
| |
| // This method is called once per second containing the frame rate and bit |
| // rate for the incoming stream |
| virtual void IncomingRate(const int video_channel, |
| const unsigned int framerate, |
| const unsigned int bitrate) = 0; |
| |
| // This method is called when the decoder needs a new key frame from encoder |
| // on the sender. |
| virtual void RequestNewKeyFrame(const int video_channel) = 0; |
| |
| protected: |
| virtual ~ViEDecoderObserver() {} |
| }; |
| |
| class WEBRTC_DLLEXPORT ViECodec { |
| public: |
| // Factory for the ViECodec sub‐API and increases an internal reference |
| // counter if successful. Returns NULL if the API is not supported or if |
| // construction fails. |
| static ViECodec* GetInterface(VideoEngine* video_engine); |
| |
| // Releases the ViECodec sub-API and decreases an internal reference |
| // counter. |
| // Returns the new reference count. This value should be zero |
| // for all sub-API:s before the VideoEngine object can be safely deleted. |
| virtual int Release() = 0; |
| |
| // Gets the number of available codecs for the VideoEngine build. |
| virtual int NumberOfCodecs() const = 0; |
| |
| // Gets a VideoCodec struct for a codec containing the default configuration |
| // for that codec type. |
| virtual int GetCodec(const unsigned char list_number, |
| VideoCodec& video_codec) const = 0; |
| |
| // Sets the send codec to use for a specified channel. |
| virtual int SetSendCodec(const int video_channel, |
| const VideoCodec& video_codec) = 0; |
| |
| // Gets the current send codec settings. |
| virtual int GetSendCodec(const int video_channel, |
| VideoCodec& video_codec) const = 0; |
| |
| // Prepares VideoEngine to receive a certain codec type and setting for a |
| // specified payload type. |
| virtual int SetReceiveCodec(const int video_channel, |
| const VideoCodec& video_codec) = 0; |
| |
| // Gets the current receive codec. |
| virtual int GetReceiveCodec(const int video_channel, |
| VideoCodec& video_codec) const = 0; |
| |
| // This function is used to get codec configuration parameters to be |
| // signaled from the encoder to the decoder in the call setup. |
| virtual int GetCodecConfigParameters( |
| const int video_channel, |
| unsigned char config_parameters[kConfigParameterSize], |
| unsigned char& config_parameters_size) const = 0; |
| |
| // Enables advanced scaling of the captured video stream if the stream |
| // differs from the send codec settings. |
| virtual int SetImageScaleStatus(const int video_channel, |
| const bool enable) = 0; |
| |
| // Gets the number of sent key frames and number of sent delta frames. |
| virtual int GetSendCodecStastistics(const int video_channel, |
| unsigned int& key_frames, |
| unsigned int& delta_frames) const = 0; |
| |
| // Gets the number of decoded key frames and number of decoded delta frames. |
| virtual int GetReceiveCodecStastistics(const int video_channel, |
| unsigned int& key_frames, |
| unsigned int& delta_frames) const = 0; |
| |
| // Estimate of the min required buffer time from the expected arrival time |
| // until rendering to get smooth playback. |
| virtual int GetReceiveSideDelay(const int video_channel, |
| int* delay_ms) const = 0; |
| |
| // Gets the bitrate targeted by the video codec rate control in kbit/s. |
| virtual int GetCodecTargetBitrate(const int video_channel, |
| unsigned int* bitrate) const = 0; |
| |
| // Gets the number of packets discarded by the jitter buffer because they |
| // arrived too late. |
| virtual unsigned int GetDiscardedPackets(const int video_channel) const = 0; |
| |
| // Enables key frame request callback in ViEDecoderObserver. |
| virtual int SetKeyFrameRequestCallbackStatus(const int video_channel, |
| const bool enable) = 0; |
| |
| // Enables key frame requests for detected lost packets. |
| virtual int SetSignalKeyPacketLossStatus( |
| const int video_channel, |
| const bool enable, |
| const bool only_key_frames = false) = 0; |
| |
| // Registers an instance of a user implementation of the ViEEncoderObserver. |
| virtual int RegisterEncoderObserver(const int video_channel, |
| ViEEncoderObserver& observer) = 0; |
| |
| // Removes an already registered instance of ViEEncoderObserver. |
| virtual int DeregisterEncoderObserver(const int video_channel) = 0; |
| |
| // Registers an instance of a user implementation of the ViEDecoderObserver. |
| virtual int RegisterDecoderObserver(const int video_channel, |
| ViEDecoderObserver& observer) = 0; |
| |
| // Removes an already registered instance of ViEDecoderObserver. |
| virtual int DeregisterDecoderObserver(const int video_channel) = 0; |
| |
| // This function forces the next encoded frame to be a key frame. This is |
| // normally used when the remote endpoint only supports out‐band key frame |
| // request. |
| virtual int SendKeyFrame(const int video_channel) = 0; |
| |
| // This function makes the decoder wait for a key frame before starting to |
| // decode the incoming video stream. |
| virtual int WaitForFirstKeyFrame(const int video_channel, |
| const bool wait) = 0; |
| |
| // Enables recording of debugging information. |
| virtual int StartDebugRecording(int video_channel, |
| const char* file_name_utf8) = 0; |
| // Disables recording of debugging information. |
| virtual int StopDebugRecording(int video_channel) = 0; |
| |
| protected: |
| ViECodec() {} |
| virtual ~ViECodec() {} |
| }; |
| |
| } // namespace webrtc |
| |
| #endif // WEBRTC_VIDEO_ENGINE_INCLUDE_VIE_CODEC_H_ |