| // Copyright 2009 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "v8.h" |
| |
| #include "bootstrapper.h" |
| #include "codegen-inl.h" |
| #include "debug.h" |
| #include "ic-inl.h" |
| #include "parser.h" |
| #include "register-allocator-inl.h" |
| #include "scopes.h" |
| |
| namespace v8 { |
| namespace internal { |
| |
| #define __ ACCESS_MASM(masm_) |
| |
| // ------------------------------------------------------------------------- |
| // Platform-specific DeferredCode functions. |
| |
| void DeferredCode::SaveRegisters() { |
| for (int i = 0; i < RegisterAllocator::kNumRegisters; i++) { |
| int action = registers_[i]; |
| if (action == kPush) { |
| __ push(RegisterAllocator::ToRegister(i)); |
| } else if (action != kIgnore && (action & kSyncedFlag) == 0) { |
| __ movq(Operand(rbp, action), RegisterAllocator::ToRegister(i)); |
| } |
| } |
| } |
| |
| void DeferredCode::RestoreRegisters() { |
| // Restore registers in reverse order due to the stack. |
| for (int i = RegisterAllocator::kNumRegisters - 1; i >= 0; i--) { |
| int action = registers_[i]; |
| if (action == kPush) { |
| __ pop(RegisterAllocator::ToRegister(i)); |
| } else if (action != kIgnore) { |
| action &= ~kSyncedFlag; |
| __ movq(RegisterAllocator::ToRegister(i), Operand(rbp, action)); |
| } |
| } |
| } |
| |
| |
| // ------------------------------------------------------------------------- |
| // CodeGenState implementation. |
| |
| CodeGenState::CodeGenState(CodeGenerator* owner) |
| : owner_(owner), |
| typeof_state_(NOT_INSIDE_TYPEOF), |
| destination_(NULL), |
| previous_(NULL) { |
| owner_->set_state(this); |
| } |
| |
| |
| CodeGenState::CodeGenState(CodeGenerator* owner, |
| TypeofState typeof_state, |
| ControlDestination* destination) |
| : owner_(owner), |
| typeof_state_(typeof_state), |
| destination_(destination), |
| previous_(owner->state()) { |
| owner_->set_state(this); |
| } |
| |
| |
| CodeGenState::~CodeGenState() { |
| ASSERT(owner_->state() == this); |
| owner_->set_state(previous_); |
| } |
| |
| |
| // ------------------------------------------------------------------------- |
| // Deferred code objects |
| // |
| // These subclasses of DeferredCode add pieces of code to the end of generated |
| // code. They are branched to from the generated code, and |
| // keep some slower code out of the main body of the generated code. |
| // Many of them call a code stub or a runtime function. |
| |
| class DeferredInlineSmiAdd: public DeferredCode { |
| public: |
| DeferredInlineSmiAdd(Register dst, |
| Smi* value, |
| OverwriteMode overwrite_mode) |
| : dst_(dst), value_(value), overwrite_mode_(overwrite_mode) { |
| set_comment("[ DeferredInlineSmiAdd"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Register dst_; |
| Smi* value_; |
| OverwriteMode overwrite_mode_; |
| }; |
| |
| |
| // The result of value + src is in dst. It either overflowed or was not |
| // smi tagged. Undo the speculative addition and call the appropriate |
| // specialized stub for add. The result is left in dst. |
| class DeferredInlineSmiAddReversed: public DeferredCode { |
| public: |
| DeferredInlineSmiAddReversed(Register dst, |
| Smi* value, |
| OverwriteMode overwrite_mode) |
| : dst_(dst), value_(value), overwrite_mode_(overwrite_mode) { |
| set_comment("[ DeferredInlineSmiAddReversed"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Register dst_; |
| Smi* value_; |
| OverwriteMode overwrite_mode_; |
| }; |
| |
| |
| class DeferredInlineSmiSub: public DeferredCode { |
| public: |
| DeferredInlineSmiSub(Register dst, |
| Smi* value, |
| OverwriteMode overwrite_mode) |
| : dst_(dst), value_(value), overwrite_mode_(overwrite_mode) { |
| set_comment("[ DeferredInlineSmiSub"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Register dst_; |
| Smi* value_; |
| OverwriteMode overwrite_mode_; |
| }; |
| |
| |
| // Call the appropriate binary operation stub to compute src op value |
| // and leave the result in dst. |
| class DeferredInlineSmiOperation: public DeferredCode { |
| public: |
| DeferredInlineSmiOperation(Token::Value op, |
| Register dst, |
| Register src, |
| Smi* value, |
| OverwriteMode overwrite_mode) |
| : op_(op), |
| dst_(dst), |
| src_(src), |
| value_(value), |
| overwrite_mode_(overwrite_mode) { |
| set_comment("[ DeferredInlineSmiOperation"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Token::Value op_; |
| Register dst_; |
| Register src_; |
| Smi* value_; |
| OverwriteMode overwrite_mode_; |
| }; |
| |
| |
| class FloatingPointHelper : public AllStatic { |
| public: |
| // Code pattern for loading a floating point value. Input value must |
| // be either a smi or a heap number object (fp value). Requirements: |
| // operand on TOS+1. Returns operand as floating point number on FPU |
| // stack. |
| static void LoadFloatOperand(MacroAssembler* masm, Register scratch); |
| |
| // Code pattern for loading a floating point value. Input value must |
| // be either a smi or a heap number object (fp value). Requirements: |
| // operand in src register. Returns operand as floating point number |
| // in XMM register |
| static void LoadFloatOperand(MacroAssembler* masm, |
| Register src, |
| XMMRegister dst); |
| |
| // Code pattern for loading floating point values. Input values must |
| // be either smi or heap number objects (fp values). Requirements: |
| // operand_1 on TOS+1 , operand_2 on TOS+2; Returns operands as |
| // floating point numbers in XMM registers. |
| static void LoadFloatOperands(MacroAssembler* masm, |
| XMMRegister dst1, |
| XMMRegister dst2); |
| |
| // Code pattern for loading floating point values onto the fp stack. |
| // Input values must be either smi or heap number objects (fp values). |
| // Requirements: |
| // Register version: operands in registers lhs and rhs. |
| // Stack version: operands on TOS+1 and TOS+2. |
| // Returns operands as floating point numbers on fp stack. |
| static void LoadFloatOperands(MacroAssembler* masm); |
| static void LoadFloatOperands(MacroAssembler* masm, |
| Register lhs, |
| Register rhs); |
| |
| // Code pattern for loading a floating point value and converting it |
| // to a 32 bit integer. Input value must be either a smi or a heap number |
| // object. |
| // Returns operands as 32-bit sign extended integers in a general purpose |
| // registers. |
| static void LoadInt32Operand(MacroAssembler* masm, |
| const Operand& src, |
| Register dst); |
| |
| // Test if operands are smi or number objects (fp). Requirements: |
| // operand_1 in rax, operand_2 in rdx; falls through on float or smi |
| // operands, jumps to the non_float label otherwise. |
| static void CheckFloatOperands(MacroAssembler* masm, |
| Label* non_float); |
| |
| // Allocate a heap number in new space with undefined value. |
| // Returns tagged pointer in result, or jumps to need_gc if new space is full. |
| static void AllocateHeapNumber(MacroAssembler* masm, |
| Label* need_gc, |
| Register scratch, |
| Register result); |
| }; |
| |
| |
| // ----------------------------------------------------------------------------- |
| // CodeGenerator implementation. |
| |
| CodeGenerator::CodeGenerator(int buffer_size, |
| Handle<Script> script, |
| bool is_eval) |
| : is_eval_(is_eval), |
| script_(script), |
| deferred_(8), |
| masm_(new MacroAssembler(NULL, buffer_size)), |
| scope_(NULL), |
| frame_(NULL), |
| allocator_(NULL), |
| state_(NULL), |
| loop_nesting_(0), |
| function_return_is_shadowed_(false), |
| in_spilled_code_(false) { |
| } |
| |
| |
| void CodeGenerator::DeclareGlobals(Handle<FixedArray> pairs) { |
| // Call the runtime to declare the globals. The inevitable call |
| // will sync frame elements to memory anyway, so we do it eagerly to |
| // allow us to push the arguments directly into place. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| |
| __ movq(kScratchRegister, pairs, RelocInfo::EMBEDDED_OBJECT); |
| frame_->EmitPush(kScratchRegister); |
| frame_->EmitPush(rsi); // The context is the second argument. |
| frame_->EmitPush(Immediate(Smi::FromInt(is_eval() ? 1 : 0))); |
| Result ignored = frame_->CallRuntime(Runtime::kDeclareGlobals, 3); |
| // Return value is ignored. |
| } |
| |
| |
| void CodeGenerator::GenCode(FunctionLiteral* function) { |
| // Record the position for debugging purposes. |
| CodeForFunctionPosition(function); |
| ZoneList<Statement*>* body = function->body(); |
| |
| // Initialize state. |
| ASSERT(scope_ == NULL); |
| scope_ = function->scope(); |
| ASSERT(allocator_ == NULL); |
| RegisterAllocator register_allocator(this); |
| allocator_ = ®ister_allocator; |
| ASSERT(frame_ == NULL); |
| frame_ = new VirtualFrame(); |
| set_in_spilled_code(false); |
| |
| // Adjust for function-level loop nesting. |
| loop_nesting_ += function->loop_nesting(); |
| |
| JumpTarget::set_compiling_deferred_code(false); |
| |
| #ifdef DEBUG |
| if (strlen(FLAG_stop_at) > 0 && |
| function->name()->IsEqualTo(CStrVector(FLAG_stop_at))) { |
| frame_->SpillAll(); |
| __ int3(); |
| } |
| #endif |
| |
| // New scope to get automatic timing calculation. |
| { // NOLINT |
| HistogramTimerScope codegen_timer(&Counters::code_generation); |
| CodeGenState state(this); |
| |
| // Entry: |
| // Stack: receiver, arguments, return address. |
| // rbp: caller's frame pointer |
| // rsp: stack pointer |
| // rdi: called JS function |
| // rsi: callee's context |
| allocator_->Initialize(); |
| frame_->Enter(); |
| |
| // Allocate space for locals and initialize them. |
| frame_->AllocateStackSlots(); |
| // Initialize the function return target after the locals are set |
| // up, because it needs the expected frame height from the frame. |
| function_return_.set_direction(JumpTarget::BIDIRECTIONAL); |
| function_return_is_shadowed_ = false; |
| |
| // Allocate the local context if needed. |
| if (scope_->num_heap_slots() > 0) { |
| Comment cmnt(masm_, "[ allocate local context"); |
| // Allocate local context. |
| // Get outer context and create a new context based on it. |
| frame_->PushFunction(); |
| Result context = frame_->CallRuntime(Runtime::kNewContext, 1); |
| |
| // Update context local. |
| frame_->SaveContextRegister(); |
| |
| // Verify that the runtime call result and rsi agree. |
| if (FLAG_debug_code) { |
| __ cmpq(context.reg(), rsi); |
| __ Assert(equal, "Runtime::NewContext should end up in rsi"); |
| } |
| } |
| |
| // TODO(1241774): Improve this code: |
| // 1) only needed if we have a context |
| // 2) no need to recompute context ptr every single time |
| // 3) don't copy parameter operand code from SlotOperand! |
| { |
| Comment cmnt2(masm_, "[ copy context parameters into .context"); |
| |
| // Note that iteration order is relevant here! If we have the same |
| // parameter twice (e.g., function (x, y, x)), and that parameter |
| // needs to be copied into the context, it must be the last argument |
| // passed to the parameter that needs to be copied. This is a rare |
| // case so we don't check for it, instead we rely on the copying |
| // order: such a parameter is copied repeatedly into the same |
| // context location and thus the last value is what is seen inside |
| // the function. |
| for (int i = 0; i < scope_->num_parameters(); i++) { |
| Variable* par = scope_->parameter(i); |
| Slot* slot = par->slot(); |
| if (slot != NULL && slot->type() == Slot::CONTEXT) { |
| // The use of SlotOperand below is safe in unspilled code |
| // because the slot is guaranteed to be a context slot. |
| // |
| // There are no parameters in the global scope. |
| ASSERT(!scope_->is_global_scope()); |
| frame_->PushParameterAt(i); |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| |
| // SlotOperand loads context.reg() with the context object |
| // stored to, used below in RecordWrite. |
| Result context = allocator_->Allocate(); |
| ASSERT(context.is_valid()); |
| __ movq(SlotOperand(slot, context.reg()), value.reg()); |
| int offset = FixedArray::kHeaderSize + slot->index() * kPointerSize; |
| Result scratch = allocator_->Allocate(); |
| ASSERT(scratch.is_valid()); |
| frame_->Spill(context.reg()); |
| frame_->Spill(value.reg()); |
| __ RecordWrite(context.reg(), offset, value.reg(), scratch.reg()); |
| } |
| } |
| } |
| |
| // Store the arguments object. This must happen after context |
| // initialization because the arguments object may be stored in |
| // the context. |
| if (ArgumentsMode() != NO_ARGUMENTS_ALLOCATION) { |
| StoreArgumentsObject(true); |
| } |
| |
| // Generate code to 'execute' declarations and initialize functions |
| // (source elements). In case of an illegal redeclaration we need to |
| // handle that instead of processing the declarations. |
| if (scope_->HasIllegalRedeclaration()) { |
| Comment cmnt(masm_, "[ illegal redeclarations"); |
| scope_->VisitIllegalRedeclaration(this); |
| } else { |
| Comment cmnt(masm_, "[ declarations"); |
| ProcessDeclarations(scope_->declarations()); |
| // Bail out if a stack-overflow exception occurred when processing |
| // declarations. |
| if (HasStackOverflow()) return; |
| } |
| |
| if (FLAG_trace) { |
| frame_->CallRuntime(Runtime::kTraceEnter, 0); |
| // Ignore the return value. |
| } |
| CheckStack(); |
| |
| // Compile the body of the function in a vanilla state. Don't |
| // bother compiling all the code if the scope has an illegal |
| // redeclaration. |
| if (!scope_->HasIllegalRedeclaration()) { |
| Comment cmnt(masm_, "[ function body"); |
| #ifdef DEBUG |
| bool is_builtin = Bootstrapper::IsActive(); |
| bool should_trace = |
| is_builtin ? FLAG_trace_builtin_calls : FLAG_trace_calls; |
| if (should_trace) { |
| frame_->CallRuntime(Runtime::kDebugTrace, 0); |
| // Ignore the return value. |
| } |
| #endif |
| VisitStatements(body); |
| |
| // Handle the return from the function. |
| if (has_valid_frame()) { |
| // If there is a valid frame, control flow can fall off the end of |
| // the body. In that case there is an implicit return statement. |
| ASSERT(!function_return_is_shadowed_); |
| CodeForReturnPosition(function); |
| frame_->PrepareForReturn(); |
| Result undefined(Factory::undefined_value()); |
| if (function_return_.is_bound()) { |
| function_return_.Jump(&undefined); |
| } else { |
| function_return_.Bind(&undefined); |
| GenerateReturnSequence(&undefined); |
| } |
| } else if (function_return_.is_linked()) { |
| // If the return target has dangling jumps to it, then we have not |
| // yet generated the return sequence. This can happen when (a) |
| // control does not flow off the end of the body so we did not |
| // compile an artificial return statement just above, and (b) there |
| // are return statements in the body but (c) they are all shadowed. |
| Result return_value; |
| function_return_.Bind(&return_value); |
| GenerateReturnSequence(&return_value); |
| } |
| } |
| } |
| |
| // Adjust for function-level loop nesting. |
| loop_nesting_ -= function->loop_nesting(); |
| |
| // Code generation state must be reset. |
| ASSERT(state_ == NULL); |
| ASSERT(loop_nesting() == 0); |
| ASSERT(!function_return_is_shadowed_); |
| function_return_.Unuse(); |
| DeleteFrame(); |
| |
| // Process any deferred code using the register allocator. |
| if (!HasStackOverflow()) { |
| HistogramTimerScope deferred_timer(&Counters::deferred_code_generation); |
| JumpTarget::set_compiling_deferred_code(true); |
| ProcessDeferred(); |
| JumpTarget::set_compiling_deferred_code(false); |
| } |
| |
| // There is no need to delete the register allocator, it is a |
| // stack-allocated local. |
| allocator_ = NULL; |
| scope_ = NULL; |
| } |
| |
| void CodeGenerator::GenerateReturnSequence(Result* return_value) { |
| // The return value is a live (but not currently reference counted) |
| // reference to rax. This is safe because the current frame does not |
| // contain a reference to rax (it is prepared for the return by spilling |
| // all registers). |
| if (FLAG_trace) { |
| frame_->Push(return_value); |
| *return_value = frame_->CallRuntime(Runtime::kTraceExit, 1); |
| } |
| return_value->ToRegister(rax); |
| |
| // Add a label for checking the size of the code used for returning. |
| #ifdef DEBUG |
| Label check_exit_codesize; |
| masm_->bind(&check_exit_codesize); |
| #endif |
| |
| // Leave the frame and return popping the arguments and the |
| // receiver. |
| frame_->Exit(); |
| masm_->ret((scope_->num_parameters() + 1) * kPointerSize); |
| #ifdef ENABLE_DEBUGGER_SUPPORT |
| // Add padding that will be overwritten by a debugger breakpoint. |
| // frame_->Exit() generates "movq rsp, rbp; pop rbp; ret k" |
| // with length 7 (3 + 1 + 3). |
| const int kPadding = Debug::kX64JSReturnSequenceLength - 7; |
| for (int i = 0; i < kPadding; ++i) { |
| masm_->int3(); |
| } |
| // Check that the size of the code used for returning matches what is |
| // expected by the debugger. |
| ASSERT_EQ(Debug::kX64JSReturnSequenceLength, |
| masm_->SizeOfCodeGeneratedSince(&check_exit_codesize)); |
| #endif |
| DeleteFrame(); |
| } |
| |
| |
| #ifdef DEBUG |
| bool CodeGenerator::HasValidEntryRegisters() { |
| return (allocator()->count(rax) == (frame()->is_used(rax) ? 1 : 0)) |
| && (allocator()->count(rbx) == (frame()->is_used(rbx) ? 1 : 0)) |
| && (allocator()->count(rcx) == (frame()->is_used(rcx) ? 1 : 0)) |
| && (allocator()->count(rdx) == (frame()->is_used(rdx) ? 1 : 0)) |
| && (allocator()->count(rdi) == (frame()->is_used(rdi) ? 1 : 0)) |
| && (allocator()->count(r8) == (frame()->is_used(r8) ? 1 : 0)) |
| && (allocator()->count(r9) == (frame()->is_used(r9) ? 1 : 0)) |
| && (allocator()->count(r11) == (frame()->is_used(r11) ? 1 : 0)) |
| && (allocator()->count(r14) == (frame()->is_used(r14) ? 1 : 0)) |
| && (allocator()->count(r15) == (frame()->is_used(r15) ? 1 : 0)) |
| && (allocator()->count(r12) == (frame()->is_used(r12) ? 1 : 0)); |
| } |
| #endif |
| |
| |
| class DeferredReferenceGetKeyedValue: public DeferredCode { |
| public: |
| explicit DeferredReferenceGetKeyedValue(Register dst, |
| Register receiver, |
| Register key, |
| bool is_global) |
| : dst_(dst), receiver_(receiver), key_(key), is_global_(is_global) { |
| set_comment("[ DeferredReferenceGetKeyedValue"); |
| } |
| |
| virtual void Generate(); |
| |
| Label* patch_site() { return &patch_site_; } |
| |
| private: |
| Label patch_site_; |
| Register dst_; |
| Register receiver_; |
| Register key_; |
| bool is_global_; |
| }; |
| |
| |
| void DeferredReferenceGetKeyedValue::Generate() { |
| __ push(receiver_); // First IC argument. |
| __ push(key_); // Second IC argument. |
| |
| // Calculate the delta from the IC call instruction to the map check |
| // movq instruction in the inlined version. This delta is stored in |
| // a test(rax, delta) instruction after the call so that we can find |
| // it in the IC initialization code and patch the movq instruction. |
| // This means that we cannot allow test instructions after calls to |
| // KeyedLoadIC stubs in other places. |
| Handle<Code> ic(Builtins::builtin(Builtins::KeyedLoadIC_Initialize)); |
| RelocInfo::Mode mode = is_global_ |
| ? RelocInfo::CODE_TARGET_CONTEXT |
| : RelocInfo::CODE_TARGET; |
| __ Call(ic, mode); |
| // The delta from the start of the map-compare instruction to the |
| // test instruction. We use masm_-> directly here instead of the __ |
| // macro because the macro sometimes uses macro expansion to turn |
| // into something that can't return a value. This is encountered |
| // when doing generated code coverage tests. |
| int delta_to_patch_site = masm_->SizeOfCodeGeneratedSince(patch_site()); |
| // Here we use masm_-> instead of the __ macro because this is the |
| // instruction that gets patched and coverage code gets in the way. |
| // TODO(X64): Consider whether it's worth switching the test to a |
| // 7-byte NOP with non-zero immediate (0f 1f 80 xxxxxxxx) which won't |
| // be generated normally. |
| masm_->testl(rax, Immediate(-delta_to_patch_site)); |
| __ IncrementCounter(&Counters::keyed_load_inline_miss, 1); |
| |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| __ pop(key_); |
| __ pop(receiver_); |
| } |
| |
| |
| class DeferredReferenceSetKeyedValue: public DeferredCode { |
| public: |
| DeferredReferenceSetKeyedValue(Register value, |
| Register key, |
| Register receiver) |
| : value_(value), key_(key), receiver_(receiver) { |
| set_comment("[ DeferredReferenceSetKeyedValue"); |
| } |
| |
| virtual void Generate(); |
| |
| Label* patch_site() { return &patch_site_; } |
| |
| private: |
| Register value_; |
| Register key_; |
| Register receiver_; |
| Label patch_site_; |
| }; |
| |
| |
| void DeferredReferenceSetKeyedValue::Generate() { |
| __ IncrementCounter(&Counters::keyed_store_inline_miss, 1); |
| // Push receiver and key arguments on the stack. |
| __ push(receiver_); |
| __ push(key_); |
| // Move value argument to eax as expected by the IC stub. |
| if (!value_.is(rax)) __ movq(rax, value_); |
| // Call the IC stub. |
| Handle<Code> ic(Builtins::builtin(Builtins::KeyedStoreIC_Initialize)); |
| __ Call(ic, RelocInfo::CODE_TARGET); |
| // The delta from the start of the map-compare instructions (initial movq) |
| // to the test instruction. We use masm_-> directly here instead of the |
| // __ macro because the macro sometimes uses macro expansion to turn |
| // into something that can't return a value. This is encountered |
| // when doing generated code coverage tests. |
| int delta_to_patch_site = masm_->SizeOfCodeGeneratedSince(patch_site()); |
| // Here we use masm_-> instead of the __ macro because this is the |
| // instruction that gets patched and coverage code gets in the way. |
| masm_->testl(rax, Immediate(-delta_to_patch_site)); |
| // Restore value (returned from store IC), key and receiver |
| // registers. |
| if (!value_.is(rax)) __ movq(value_, rax); |
| __ pop(key_); |
| __ pop(receiver_); |
| } |
| |
| |
| class CallFunctionStub: public CodeStub { |
| public: |
| CallFunctionStub(int argc, InLoopFlag in_loop) |
| : argc_(argc), in_loop_(in_loop) { } |
| |
| void Generate(MacroAssembler* masm); |
| |
| private: |
| int argc_; |
| InLoopFlag in_loop_; |
| |
| #ifdef DEBUG |
| void Print() { PrintF("CallFunctionStub (args %d)\n", argc_); } |
| #endif |
| |
| Major MajorKey() { return CallFunction; } |
| int MinorKey() { return argc_; } |
| InLoopFlag InLoop() { return in_loop_; } |
| }; |
| |
| |
| void CodeGenerator::CallApplyLazy(Property* apply, |
| Expression* receiver, |
| VariableProxy* arguments, |
| int position) { |
| ASSERT(ArgumentsMode() == LAZY_ARGUMENTS_ALLOCATION); |
| ASSERT(arguments->IsArguments()); |
| |
| JumpTarget slow, done; |
| |
| // Load the apply function onto the stack. This will usually |
| // give us a megamorphic load site. Not super, but it works. |
| Reference ref(this, apply); |
| ref.GetValue(NOT_INSIDE_TYPEOF); |
| ASSERT(ref.type() == Reference::NAMED); |
| |
| // Load the receiver and the existing arguments object onto the |
| // expression stack. Avoid allocating the arguments object here. |
| Load(receiver); |
| LoadFromSlot(scope_->arguments()->var()->slot(), NOT_INSIDE_TYPEOF); |
| |
| // Emit the source position information after having loaded the |
| // receiver and the arguments. |
| CodeForSourcePosition(position); |
| |
| // Check if the arguments object has been lazily allocated |
| // already. If so, just use that instead of copying the arguments |
| // from the stack. This also deals with cases where a local variable |
| // named 'arguments' has been introduced. |
| frame_->Dup(); |
| Result probe = frame_->Pop(); |
| bool try_lazy = true; |
| if (probe.is_constant()) { |
| try_lazy = probe.handle()->IsTheHole(); |
| } else { |
| __ Cmp(probe.reg(), Factory::the_hole_value()); |
| probe.Unuse(); |
| slow.Branch(not_equal); |
| } |
| |
| if (try_lazy) { |
| JumpTarget build_args; |
| |
| // Get rid of the arguments object probe. |
| frame_->Drop(); |
| |
| // Before messing with the execution stack, we sync all |
| // elements. This is bound to happen anyway because we're |
| // about to call a function. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| |
| // Check that the receiver really is a JavaScript object. |
| { |
| frame_->PushElementAt(0); |
| Result receiver = frame_->Pop(); |
| receiver.ToRegister(); |
| Condition is_smi = masm_->CheckSmi(receiver.reg()); |
| build_args.Branch(is_smi); |
| // We allow all JSObjects including JSFunctions. As long as |
| // JS_FUNCTION_TYPE is the last instance type and it is right |
| // after LAST_JS_OBJECT_TYPE, we do not have to check the upper |
| // bound. |
| ASSERT(LAST_TYPE == JS_FUNCTION_TYPE); |
| ASSERT(JS_FUNCTION_TYPE == LAST_JS_OBJECT_TYPE + 1); |
| __ CmpObjectType(receiver.reg(), FIRST_JS_OBJECT_TYPE, kScratchRegister); |
| build_args.Branch(below); |
| } |
| |
| // Verify that we're invoking Function.prototype.apply. |
| { |
| frame_->PushElementAt(1); |
| Result apply = frame_->Pop(); |
| apply.ToRegister(); |
| Condition is_smi = masm_->CheckSmi(apply.reg()); |
| build_args.Branch(is_smi); |
| Result tmp = allocator_->Allocate(); |
| __ CmpObjectType(apply.reg(), JS_FUNCTION_TYPE, tmp.reg()); |
| build_args.Branch(not_equal); |
| __ movq(tmp.reg(), |
| FieldOperand(apply.reg(), JSFunction::kSharedFunctionInfoOffset)); |
| Handle<Code> apply_code(Builtins::builtin(Builtins::FunctionApply)); |
| __ Cmp(FieldOperand(tmp.reg(), SharedFunctionInfo::kCodeOffset), |
| apply_code); |
| build_args.Branch(not_equal); |
| } |
| |
| // Get the function receiver from the stack. Check that it |
| // really is a function. |
| __ movq(rdi, Operand(rsp, 2 * kPointerSize)); |
| Condition is_smi = masm_->CheckSmi(rdi); |
| build_args.Branch(is_smi); |
| __ CmpObjectType(rdi, JS_FUNCTION_TYPE, rcx); |
| build_args.Branch(not_equal); |
| |
| // Copy the arguments to this function possibly from the |
| // adaptor frame below it. |
| Label invoke, adapted; |
| __ movq(rdx, Operand(rbp, StandardFrameConstants::kCallerFPOffset)); |
| __ movq(rcx, Operand(rdx, StandardFrameConstants::kContextOffset)); |
| __ cmpq(rcx, Immediate(Smi::FromInt(StackFrame::ARGUMENTS_ADAPTOR))); |
| __ j(equal, &adapted); |
| |
| // No arguments adaptor frame. Copy fixed number of arguments. |
| __ movq(rax, Immediate(scope_->num_parameters())); |
| for (int i = 0; i < scope_->num_parameters(); i++) { |
| __ push(frame_->ParameterAt(i)); |
| } |
| __ jmp(&invoke); |
| |
| // Arguments adaptor frame present. Copy arguments from there, but |
| // avoid copying too many arguments to avoid stack overflows. |
| __ bind(&adapted); |
| static const uint32_t kArgumentsLimit = 1 * KB; |
| __ movq(rax, Operand(rdx, ArgumentsAdaptorFrameConstants::kLengthOffset)); |
| __ SmiToInteger32(rax, rax); |
| __ movq(rcx, rax); |
| __ cmpq(rax, Immediate(kArgumentsLimit)); |
| build_args.Branch(above); |
| |
| // Loop through the arguments pushing them onto the execution |
| // stack. We don't inform the virtual frame of the push, so we don't |
| // have to worry about getting rid of the elements from the virtual |
| // frame. |
| Label loop; |
| __ bind(&loop); |
| __ testl(rcx, rcx); |
| __ j(zero, &invoke); |
| __ push(Operand(rdx, rcx, times_pointer_size, 1 * kPointerSize)); |
| __ decl(rcx); |
| __ jmp(&loop); |
| |
| // Invoke the function. The virtual frame knows about the receiver |
| // so make sure to forget that explicitly. |
| __ bind(&invoke); |
| ParameterCount actual(rax); |
| __ InvokeFunction(rdi, actual, CALL_FUNCTION); |
| frame_->Forget(1); |
| Result result = allocator()->Allocate(rax); |
| frame_->SetElementAt(0, &result); |
| done.Jump(); |
| |
| // Slow-case: Allocate the arguments object since we know it isn't |
| // there, and fall-through to the slow-case where we call |
| // Function.prototype.apply. |
| build_args.Bind(); |
| Result arguments_object = StoreArgumentsObject(false); |
| frame_->Push(&arguments_object); |
| slow.Bind(); |
| } |
| |
| // Flip the apply function and the function to call on the stack, so |
| // the function looks like the receiver of the apply call. This way, |
| // the generic Function.prototype.apply implementation can deal with |
| // the call like it usually does. |
| Result a2 = frame_->Pop(); |
| Result a1 = frame_->Pop(); |
| Result ap = frame_->Pop(); |
| Result fn = frame_->Pop(); |
| frame_->Push(&ap); |
| frame_->Push(&fn); |
| frame_->Push(&a1); |
| frame_->Push(&a2); |
| CallFunctionStub call_function(2, NOT_IN_LOOP); |
| Result res = frame_->CallStub(&call_function, 3); |
| frame_->Push(&res); |
| |
| // All done. Restore context register after call. |
| if (try_lazy) done.Bind(); |
| frame_->RestoreContextRegister(); |
| } |
| |
| |
| class DeferredStackCheck: public DeferredCode { |
| public: |
| DeferredStackCheck() { |
| set_comment("[ DeferredStackCheck"); |
| } |
| |
| virtual void Generate(); |
| }; |
| |
| |
| void DeferredStackCheck::Generate() { |
| StackCheckStub stub; |
| __ CallStub(&stub); |
| } |
| |
| |
| void CodeGenerator::CheckStack() { |
| if (FLAG_check_stack) { |
| DeferredStackCheck* deferred = new DeferredStackCheck; |
| __ CompareRoot(rsp, Heap::kStackLimitRootIndex); |
| deferred->Branch(below); |
| deferred->BindExit(); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitAndSpill(Statement* statement) { |
| // TODO(X64): No architecture specific code. Move to shared location. |
| ASSERT(in_spilled_code()); |
| set_in_spilled_code(false); |
| Visit(statement); |
| if (frame_ != NULL) { |
| frame_->SpillAll(); |
| } |
| set_in_spilled_code(true); |
| } |
| |
| |
| void CodeGenerator::VisitStatementsAndSpill(ZoneList<Statement*>* statements) { |
| ASSERT(in_spilled_code()); |
| set_in_spilled_code(false); |
| VisitStatements(statements); |
| if (frame_ != NULL) { |
| frame_->SpillAll(); |
| } |
| set_in_spilled_code(true); |
| } |
| |
| |
| void CodeGenerator::VisitStatements(ZoneList<Statement*>* statements) { |
| ASSERT(!in_spilled_code()); |
| for (int i = 0; has_valid_frame() && i < statements->length(); i++) { |
| Visit(statements->at(i)); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitBlock(Block* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ Block"); |
| CodeForStatementPosition(node); |
| node->break_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| VisitStatements(node->statements()); |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| node->break_target()->Unuse(); |
| } |
| |
| |
| void CodeGenerator::VisitDeclaration(Declaration* node) { |
| Comment cmnt(masm_, "[ Declaration"); |
| CodeForStatementPosition(node); |
| Variable* var = node->proxy()->var(); |
| ASSERT(var != NULL); // must have been resolved |
| Slot* slot = var->slot(); |
| |
| // If it was not possible to allocate the variable at compile time, |
| // we need to "declare" it at runtime to make sure it actually |
| // exists in the local context. |
| if (slot != NULL && slot->type() == Slot::LOOKUP) { |
| // Variables with a "LOOKUP" slot were introduced as non-locals |
| // during variable resolution and must have mode DYNAMIC. |
| ASSERT(var->is_dynamic()); |
| // For now, just do a runtime call. Sync the virtual frame eagerly |
| // so we can simply push the arguments into place. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| frame_->EmitPush(rsi); |
| __ movq(kScratchRegister, var->name(), RelocInfo::EMBEDDED_OBJECT); |
| frame_->EmitPush(kScratchRegister); |
| // Declaration nodes are always introduced in one of two modes. |
| ASSERT(node->mode() == Variable::VAR || node->mode() == Variable::CONST); |
| PropertyAttributes attr = node->mode() == Variable::VAR ? NONE : READ_ONLY; |
| frame_->EmitPush(Immediate(Smi::FromInt(attr))); |
| // Push initial value, if any. |
| // Note: For variables we must not push an initial value (such as |
| // 'undefined') because we may have a (legal) redeclaration and we |
| // must not destroy the current value. |
| if (node->mode() == Variable::CONST) { |
| frame_->EmitPush(Heap::kTheHoleValueRootIndex); |
| } else if (node->fun() != NULL) { |
| Load(node->fun()); |
| } else { |
| frame_->EmitPush(Immediate(Smi::FromInt(0))); // no initial value! |
| } |
| Result ignored = frame_->CallRuntime(Runtime::kDeclareContextSlot, 4); |
| // Ignore the return value (declarations are statements). |
| return; |
| } |
| |
| ASSERT(!var->is_global()); |
| |
| // If we have a function or a constant, we need to initialize the variable. |
| Expression* val = NULL; |
| if (node->mode() == Variable::CONST) { |
| val = new Literal(Factory::the_hole_value()); |
| } else { |
| val = node->fun(); // NULL if we don't have a function |
| } |
| |
| if (val != NULL) { |
| { |
| // Set the initial value. |
| Reference target(this, node->proxy()); |
| Load(val); |
| target.SetValue(NOT_CONST_INIT); |
| // The reference is removed from the stack (preserving TOS) when |
| // it goes out of scope. |
| } |
| // Get rid of the assigned value (declarations are statements). |
| frame_->Drop(); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitExpressionStatement(ExpressionStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ ExpressionStatement"); |
| CodeForStatementPosition(node); |
| Expression* expression = node->expression(); |
| expression->MarkAsStatement(); |
| Load(expression); |
| // Remove the lingering expression result from the top of stack. |
| frame_->Drop(); |
| } |
| |
| |
| void CodeGenerator::VisitEmptyStatement(EmptyStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "// EmptyStatement"); |
| CodeForStatementPosition(node); |
| // nothing to do |
| } |
| |
| |
| void CodeGenerator::VisitIfStatement(IfStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ IfStatement"); |
| // Generate different code depending on which parts of the if statement |
| // are present or not. |
| bool has_then_stm = node->HasThenStatement(); |
| bool has_else_stm = node->HasElseStatement(); |
| |
| CodeForStatementPosition(node); |
| JumpTarget exit; |
| if (has_then_stm && has_else_stm) { |
| JumpTarget then; |
| JumpTarget else_; |
| ControlDestination dest(&then, &else_, true); |
| LoadCondition(node->condition(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.false_was_fall_through()) { |
| // The else target was bound, so we compile the else part first. |
| Visit(node->else_statement()); |
| |
| // We may have dangling jumps to the then part. |
| if (then.is_linked()) { |
| if (has_valid_frame()) exit.Jump(); |
| then.Bind(); |
| Visit(node->then_statement()); |
| } |
| } else { |
| // The then target was bound, so we compile the then part first. |
| Visit(node->then_statement()); |
| |
| if (else_.is_linked()) { |
| if (has_valid_frame()) exit.Jump(); |
| else_.Bind(); |
| Visit(node->else_statement()); |
| } |
| } |
| |
| } else if (has_then_stm) { |
| ASSERT(!has_else_stm); |
| JumpTarget then; |
| ControlDestination dest(&then, &exit, true); |
| LoadCondition(node->condition(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.false_was_fall_through()) { |
| // The exit label was bound. We may have dangling jumps to the |
| // then part. |
| if (then.is_linked()) { |
| exit.Unuse(); |
| exit.Jump(); |
| then.Bind(); |
| Visit(node->then_statement()); |
| } |
| } else { |
| // The then label was bound. |
| Visit(node->then_statement()); |
| } |
| |
| } else if (has_else_stm) { |
| ASSERT(!has_then_stm); |
| JumpTarget else_; |
| ControlDestination dest(&exit, &else_, false); |
| LoadCondition(node->condition(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.true_was_fall_through()) { |
| // The exit label was bound. We may have dangling jumps to the |
| // else part. |
| if (else_.is_linked()) { |
| exit.Unuse(); |
| exit.Jump(); |
| else_.Bind(); |
| Visit(node->else_statement()); |
| } |
| } else { |
| // The else label was bound. |
| Visit(node->else_statement()); |
| } |
| |
| } else { |
| ASSERT(!has_then_stm && !has_else_stm); |
| // We only care about the condition's side effects (not its value |
| // or control flow effect). LoadCondition is called without |
| // forcing control flow. |
| ControlDestination dest(&exit, &exit, true); |
| LoadCondition(node->condition(), NOT_INSIDE_TYPEOF, &dest, false); |
| if (!dest.is_used()) { |
| // We got a value on the frame rather than (or in addition to) |
| // control flow. |
| frame_->Drop(); |
| } |
| } |
| |
| if (exit.is_linked()) { |
| exit.Bind(); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitContinueStatement(ContinueStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ ContinueStatement"); |
| CodeForStatementPosition(node); |
| node->target()->continue_target()->Jump(); |
| } |
| |
| |
| void CodeGenerator::VisitBreakStatement(BreakStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ BreakStatement"); |
| CodeForStatementPosition(node); |
| node->target()->break_target()->Jump(); |
| } |
| |
| |
| void CodeGenerator::VisitReturnStatement(ReturnStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ ReturnStatement"); |
| |
| CodeForStatementPosition(node); |
| Load(node->expression()); |
| Result return_value = frame_->Pop(); |
| if (function_return_is_shadowed_) { |
| function_return_.Jump(&return_value); |
| } else { |
| frame_->PrepareForReturn(); |
| if (function_return_.is_bound()) { |
| // If the function return label is already bound we reuse the |
| // code by jumping to the return site. |
| function_return_.Jump(&return_value); |
| } else { |
| function_return_.Bind(&return_value); |
| GenerateReturnSequence(&return_value); |
| } |
| } |
| } |
| |
| |
| void CodeGenerator::VisitWithEnterStatement(WithEnterStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ WithEnterStatement"); |
| CodeForStatementPosition(node); |
| Load(node->expression()); |
| Result context; |
| if (node->is_catch_block()) { |
| context = frame_->CallRuntime(Runtime::kPushCatchContext, 1); |
| } else { |
| context = frame_->CallRuntime(Runtime::kPushContext, 1); |
| } |
| |
| // Update context local. |
| frame_->SaveContextRegister(); |
| |
| // Verify that the runtime call result and rsi agree. |
| if (FLAG_debug_code) { |
| __ cmpq(context.reg(), rsi); |
| __ Assert(equal, "Runtime::NewContext should end up in rsi"); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitWithExitStatement(WithExitStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ WithExitStatement"); |
| CodeForStatementPosition(node); |
| // Pop context. |
| __ movq(rsi, ContextOperand(rsi, Context::PREVIOUS_INDEX)); |
| // Update context local. |
| frame_->SaveContextRegister(); |
| } |
| |
| |
| void CodeGenerator::VisitSwitchStatement(SwitchStatement* node) { |
| // TODO(X64): This code is completely generic and should be moved somewhere |
| // where it can be shared between architectures. |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ SwitchStatement"); |
| CodeForStatementPosition(node); |
| node->break_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| |
| // Compile the switch value. |
| Load(node->tag()); |
| |
| ZoneList<CaseClause*>* cases = node->cases(); |
| int length = cases->length(); |
| CaseClause* default_clause = NULL; |
| |
| JumpTarget next_test; |
| // Compile the case label expressions and comparisons. Exit early |
| // if a comparison is unconditionally true. The target next_test is |
| // bound before the loop in order to indicate control flow to the |
| // first comparison. |
| next_test.Bind(); |
| for (int i = 0; i < length && !next_test.is_unused(); i++) { |
| CaseClause* clause = cases->at(i); |
| // The default is not a test, but remember it for later. |
| if (clause->is_default()) { |
| default_clause = clause; |
| continue; |
| } |
| |
| Comment cmnt(masm_, "[ Case comparison"); |
| // We recycle the same target next_test for each test. Bind it if |
| // the previous test has not done so and then unuse it for the |
| // loop. |
| if (next_test.is_linked()) { |
| next_test.Bind(); |
| } |
| next_test.Unuse(); |
| |
| // Duplicate the switch value. |
| frame_->Dup(); |
| |
| // Compile the label expression. |
| Load(clause->label()); |
| |
| // Compare and branch to the body if true or the next test if |
| // false. Prefer the next test as a fall through. |
| ControlDestination dest(clause->body_target(), &next_test, false); |
| Comparison(equal, true, &dest); |
| |
| // If the comparison fell through to the true target, jump to the |
| // actual body. |
| if (dest.true_was_fall_through()) { |
| clause->body_target()->Unuse(); |
| clause->body_target()->Jump(); |
| } |
| } |
| |
| // If there was control flow to a next test from the last one |
| // compiled, compile a jump to the default or break target. |
| if (!next_test.is_unused()) { |
| if (next_test.is_linked()) { |
| next_test.Bind(); |
| } |
| // Drop the switch value. |
| frame_->Drop(); |
| if (default_clause != NULL) { |
| default_clause->body_target()->Jump(); |
| } else { |
| node->break_target()->Jump(); |
| } |
| } |
| |
| // The last instruction emitted was a jump, either to the default |
| // clause or the break target, or else to a case body from the loop |
| // that compiles the tests. |
| ASSERT(!has_valid_frame()); |
| // Compile case bodies as needed. |
| for (int i = 0; i < length; i++) { |
| CaseClause* clause = cases->at(i); |
| |
| // There are two ways to reach the body: from the corresponding |
| // test or as the fall through of the previous body. |
| if (clause->body_target()->is_linked() || has_valid_frame()) { |
| if (clause->body_target()->is_linked()) { |
| if (has_valid_frame()) { |
| // If we have both a jump to the test and a fall through, put |
| // a jump on the fall through path to avoid the dropping of |
| // the switch value on the test path. The exception is the |
| // default which has already had the switch value dropped. |
| if (clause->is_default()) { |
| clause->body_target()->Bind(); |
| } else { |
| JumpTarget body; |
| body.Jump(); |
| clause->body_target()->Bind(); |
| frame_->Drop(); |
| body.Bind(); |
| } |
| } else { |
| // No fall through to worry about. |
| clause->body_target()->Bind(); |
| if (!clause->is_default()) { |
| frame_->Drop(); |
| } |
| } |
| } else { |
| // Otherwise, we have only fall through. |
| ASSERT(has_valid_frame()); |
| } |
| |
| // We are now prepared to compile the body. |
| Comment cmnt(masm_, "[ Case body"); |
| VisitStatements(clause->statements()); |
| } |
| clause->body_target()->Unuse(); |
| } |
| |
| // We may not have a valid frame here so bind the break target only |
| // if needed. |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| node->break_target()->Unuse(); |
| } |
| |
| |
| void CodeGenerator::VisitLoopStatement(LoopStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ LoopStatement"); |
| CodeForStatementPosition(node); |
| node->break_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| |
| // Simple condition analysis. ALWAYS_TRUE and ALWAYS_FALSE represent a |
| // known result for the test expression, with no side effects. |
| enum { ALWAYS_TRUE, ALWAYS_FALSE, DONT_KNOW } info = DONT_KNOW; |
| if (node->cond() == NULL) { |
| ASSERT(node->type() == LoopStatement::FOR_LOOP); |
| info = ALWAYS_TRUE; |
| } else { |
| Literal* lit = node->cond()->AsLiteral(); |
| if (lit != NULL) { |
| if (lit->IsTrue()) { |
| info = ALWAYS_TRUE; |
| } else if (lit->IsFalse()) { |
| info = ALWAYS_FALSE; |
| } |
| } |
| } |
| |
| switch (node->type()) { |
| case LoopStatement::DO_LOOP: { |
| JumpTarget body(JumpTarget::BIDIRECTIONAL); |
| IncrementLoopNesting(); |
| |
| // Label the top of the loop for the backward jump if necessary. |
| if (info == ALWAYS_TRUE) { |
| // Use the continue target. |
| node->continue_target()->set_direction(JumpTarget::BIDIRECTIONAL); |
| node->continue_target()->Bind(); |
| } else if (info == ALWAYS_FALSE) { |
| // No need to label it. |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| } else { |
| // Continue is the test, so use the backward body target. |
| ASSERT(info == DONT_KNOW); |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| body.Bind(); |
| } |
| |
| CheckStack(); // TODO(1222600): ignore if body contains calls. |
| Visit(node->body()); |
| |
| // Compile the test. |
| if (info == ALWAYS_TRUE) { |
| // If control flow can fall off the end of the body, jump back |
| // to the top and bind the break target at the exit. |
| if (has_valid_frame()) { |
| node->continue_target()->Jump(); |
| } |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| |
| } else if (info == ALWAYS_FALSE) { |
| // We may have had continues or breaks in the body. |
| if (node->continue_target()->is_linked()) { |
| node->continue_target()->Bind(); |
| } |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| |
| } else { |
| ASSERT(info == DONT_KNOW); |
| // We have to compile the test expression if it can be reached by |
| // control flow falling out of the body or via continue. |
| if (node->continue_target()->is_linked()) { |
| node->continue_target()->Bind(); |
| } |
| if (has_valid_frame()) { |
| ControlDestination dest(&body, node->break_target(), false); |
| LoadCondition(node->cond(), NOT_INSIDE_TYPEOF, &dest, true); |
| } |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| } |
| break; |
| } |
| |
| case LoopStatement::WHILE_LOOP: { |
| // Do not duplicate conditions that may have function literal |
| // subexpressions. This can cause us to compile the function |
| // literal twice. |
| bool test_at_bottom = !node->may_have_function_literal(); |
| |
| IncrementLoopNesting(); |
| |
| // If the condition is always false and has no side effects, we |
| // do not need to compile anything. |
| if (info == ALWAYS_FALSE) break; |
| |
| JumpTarget body; |
| if (test_at_bottom) { |
| body.set_direction(JumpTarget::BIDIRECTIONAL); |
| } |
| |
| // Based on the condition analysis, compile the test as necessary. |
| if (info == ALWAYS_TRUE) { |
| // We will not compile the test expression. Label the top of |
| // the loop with the continue target. |
| node->continue_target()->set_direction(JumpTarget::BIDIRECTIONAL); |
| node->continue_target()->Bind(); |
| } else { |
| ASSERT(info == DONT_KNOW); // ALWAYS_FALSE cannot reach here. |
| if (test_at_bottom) { |
| // Continue is the test at the bottom, no need to label the |
| // test at the top. The body is a backward target. |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| } else { |
| // Label the test at the top as the continue target. The |
| // body is a forward-only target. |
| node->continue_target()->set_direction(JumpTarget::BIDIRECTIONAL); |
| node->continue_target()->Bind(); |
| } |
| // Compile the test with the body as the true target and |
| // preferred fall-through and with the break target as the |
| // false target. |
| ControlDestination dest(&body, node->break_target(), true); |
| LoadCondition(node->cond(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.false_was_fall_through()) { |
| // If we got the break target as fall-through, the test may |
| // have been unconditionally false (if there are no jumps to |
| // the body). |
| if (!body.is_linked()) break; |
| |
| // Otherwise, jump around the body on the fall through and |
| // then bind the body target. |
| node->break_target()->Unuse(); |
| node->break_target()->Jump(); |
| body.Bind(); |
| } |
| } |
| |
| CheckStack(); // TODO(1222600): ignore if body contains calls. |
| Visit(node->body()); |
| |
| // Based on the condition analysis, compile the backward jump as |
| // necessary. |
| if (info == ALWAYS_TRUE) { |
| // The loop body has been labeled with the continue target. |
| if (has_valid_frame()) { |
| node->continue_target()->Jump(); |
| } |
| } else { |
| ASSERT(info == DONT_KNOW); // ALWAYS_FALSE cannot reach here. |
| if (test_at_bottom) { |
| // If we have chosen to recompile the test at the bottom, |
| // then it is the continue target. |
| if (node->continue_target()->is_linked()) { |
| node->continue_target()->Bind(); |
| } |
| if (has_valid_frame()) { |
| // The break target is the fall-through (body is a backward |
| // jump from here and thus an invalid fall-through). |
| ControlDestination dest(&body, node->break_target(), false); |
| LoadCondition(node->cond(), NOT_INSIDE_TYPEOF, &dest, true); |
| } |
| } else { |
| // If we have chosen not to recompile the test at the |
| // bottom, jump back to the one at the top. |
| if (has_valid_frame()) { |
| node->continue_target()->Jump(); |
| } |
| } |
| } |
| |
| // The break target may be already bound (by the condition), or |
| // there may not be a valid frame. Bind it only if needed. |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| break; |
| } |
| |
| case LoopStatement::FOR_LOOP: { |
| // Do not duplicate conditions that may have function literal |
| // subexpressions. This can cause us to compile the function |
| // literal twice. |
| bool test_at_bottom = !node->may_have_function_literal(); |
| |
| // Compile the init expression if present. |
| if (node->init() != NULL) { |
| Visit(node->init()); |
| } |
| |
| IncrementLoopNesting(); |
| |
| // If the condition is always false and has no side effects, we |
| // do not need to compile anything else. |
| if (info == ALWAYS_FALSE) break; |
| |
| // Target for backward edge if no test at the bottom, otherwise |
| // unused. |
| JumpTarget loop(JumpTarget::BIDIRECTIONAL); |
| |
| // Target for backward edge if there is a test at the bottom, |
| // otherwise used as target for test at the top. |
| JumpTarget body; |
| if (test_at_bottom) { |
| body.set_direction(JumpTarget::BIDIRECTIONAL); |
| } |
| |
| // Based on the condition analysis, compile the test as necessary. |
| if (info == ALWAYS_TRUE) { |
| // We will not compile the test expression. Label the top of |
| // the loop. |
| if (node->next() == NULL) { |
| // Use the continue target if there is no update expression. |
| node->continue_target()->set_direction(JumpTarget::BIDIRECTIONAL); |
| node->continue_target()->Bind(); |
| } else { |
| // Otherwise use the backward loop target. |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| loop.Bind(); |
| } |
| } else { |
| ASSERT(info == DONT_KNOW); |
| if (test_at_bottom) { |
| // Continue is either the update expression or the test at |
| // the bottom, no need to label the test at the top. |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| } else if (node->next() == NULL) { |
| // We are not recompiling the test at the bottom and there |
| // is no update expression. |
| node->continue_target()->set_direction(JumpTarget::BIDIRECTIONAL); |
| node->continue_target()->Bind(); |
| } else { |
| // We are not recompiling the test at the bottom and there |
| // is an update expression. |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| loop.Bind(); |
| } |
| |
| // Compile the test with the body as the true target and |
| // preferred fall-through and with the break target as the |
| // false target. |
| ControlDestination dest(&body, node->break_target(), true); |
| LoadCondition(node->cond(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.false_was_fall_through()) { |
| // If we got the break target as fall-through, the test may |
| // have been unconditionally false (if there are no jumps to |
| // the body). |
| if (!body.is_linked()) break; |
| |
| // Otherwise, jump around the body on the fall through and |
| // then bind the body target. |
| node->break_target()->Unuse(); |
| node->break_target()->Jump(); |
| body.Bind(); |
| } |
| } |
| |
| CheckStack(); // TODO(1222600): ignore if body contains calls. |
| Visit(node->body()); |
| |
| // If there is an update expression, compile it if necessary. |
| if (node->next() != NULL) { |
| if (node->continue_target()->is_linked()) { |
| node->continue_target()->Bind(); |
| } |
| |
| // Control can reach the update by falling out of the body or |
| // by a continue. |
| if (has_valid_frame()) { |
| // Record the source position of the statement as this code |
| // which is after the code for the body actually belongs to |
| // the loop statement and not the body. |
| CodeForStatementPosition(node); |
| Visit(node->next()); |
| } |
| } |
| |
| // Based on the condition analysis, compile the backward jump as |
| // necessary. |
| if (info == ALWAYS_TRUE) { |
| if (has_valid_frame()) { |
| if (node->next() == NULL) { |
| node->continue_target()->Jump(); |
| } else { |
| loop.Jump(); |
| } |
| } |
| } else { |
| ASSERT(info == DONT_KNOW); // ALWAYS_FALSE cannot reach here. |
| if (test_at_bottom) { |
| if (node->continue_target()->is_linked()) { |
| // We can have dangling jumps to the continue target if |
| // there was no update expression. |
| node->continue_target()->Bind(); |
| } |
| // Control can reach the test at the bottom by falling out |
| // of the body, by a continue in the body, or from the |
| // update expression. |
| if (has_valid_frame()) { |
| // The break target is the fall-through (body is a |
| // backward jump from here). |
| ControlDestination dest(&body, node->break_target(), false); |
| LoadCondition(node->cond(), NOT_INSIDE_TYPEOF, &dest, true); |
| } |
| } else { |
| // Otherwise, jump back to the test at the top. |
| if (has_valid_frame()) { |
| if (node->next() == NULL) { |
| node->continue_target()->Jump(); |
| } else { |
| loop.Jump(); |
| } |
| } |
| } |
| } |
| |
| // The break target may be already bound (by the condition), or |
| // there may not be a valid frame. Bind it only if needed. |
| if (node->break_target()->is_linked()) { |
| node->break_target()->Bind(); |
| } |
| break; |
| } |
| } |
| |
| DecrementLoopNesting(); |
| node->continue_target()->Unuse(); |
| node->break_target()->Unuse(); |
| } |
| |
| |
| void CodeGenerator::VisitForInStatement(ForInStatement* node) { |
| ASSERT(!in_spilled_code()); |
| VirtualFrame::SpilledScope spilled_scope; |
| Comment cmnt(masm_, "[ ForInStatement"); |
| CodeForStatementPosition(node); |
| |
| JumpTarget primitive; |
| JumpTarget jsobject; |
| JumpTarget fixed_array; |
| JumpTarget entry(JumpTarget::BIDIRECTIONAL); |
| JumpTarget end_del_check; |
| JumpTarget exit; |
| |
| // Get the object to enumerate over (converted to JSObject). |
| LoadAndSpill(node->enumerable()); |
| |
| // Both SpiderMonkey and kjs ignore null and undefined in contrast |
| // to the specification. 12.6.4 mandates a call to ToObject. |
| frame_->EmitPop(rax); |
| |
| // rax: value to be iterated over |
| __ CompareRoot(rax, Heap::kUndefinedValueRootIndex); |
| exit.Branch(equal); |
| __ CompareRoot(rax, Heap::kNullValueRootIndex); |
| exit.Branch(equal); |
| |
| // Stack layout in body: |
| // [iteration counter (smi)] <- slot 0 |
| // [length of array] <- slot 1 |
| // [FixedArray] <- slot 2 |
| // [Map or 0] <- slot 3 |
| // [Object] <- slot 4 |
| |
| // Check if enumerable is already a JSObject |
| // rax: value to be iterated over |
| Condition is_smi = masm_->CheckSmi(rax); |
| primitive.Branch(is_smi); |
| __ CmpObjectType(rax, FIRST_JS_OBJECT_TYPE, rcx); |
| jsobject.Branch(above_equal); |
| |
| primitive.Bind(); |
| frame_->EmitPush(rax); |
| frame_->InvokeBuiltin(Builtins::TO_OBJECT, CALL_FUNCTION, 1); |
| // function call returns the value in rax, which is where we want it below |
| |
| jsobject.Bind(); |
| // Get the set of properties (as a FixedArray or Map). |
| // rax: value to be iterated over |
| frame_->EmitPush(rax); // push the object being iterated over (slot 4) |
| |
| frame_->EmitPush(rax); // push the Object (slot 4) for the runtime call |
| frame_->CallRuntime(Runtime::kGetPropertyNamesFast, 1); |
| |
| // If we got a Map, we can do a fast modification check. |
| // Otherwise, we got a FixedArray, and we have to do a slow check. |
| // rax: map or fixed array (result from call to |
| // Runtime::kGetPropertyNamesFast) |
| __ movq(rdx, rax); |
| __ movq(rcx, FieldOperand(rdx, HeapObject::kMapOffset)); |
| __ CompareRoot(rcx, Heap::kMetaMapRootIndex); |
| fixed_array.Branch(not_equal); |
| |
| // Get enum cache |
| // rax: map (result from call to Runtime::kGetPropertyNamesFast) |
| __ movq(rcx, rax); |
| __ movq(rcx, FieldOperand(rcx, Map::kInstanceDescriptorsOffset)); |
| // Get the bridge array held in the enumeration index field. |
| __ movq(rcx, FieldOperand(rcx, DescriptorArray::kEnumerationIndexOffset)); |
| // Get the cache from the bridge array. |
| __ movq(rdx, FieldOperand(rcx, DescriptorArray::kEnumCacheBridgeCacheOffset)); |
| |
| frame_->EmitPush(rax); // <- slot 3 |
| frame_->EmitPush(rdx); // <- slot 2 |
| __ movl(rax, FieldOperand(rdx, FixedArray::kLengthOffset)); |
| __ Integer32ToSmi(rax, rax); |
| frame_->EmitPush(rax); // <- slot 1 |
| frame_->EmitPush(Immediate(Smi::FromInt(0))); // <- slot 0 |
| entry.Jump(); |
| |
| fixed_array.Bind(); |
| // rax: fixed array (result from call to Runtime::kGetPropertyNamesFast) |
| frame_->EmitPush(Immediate(Smi::FromInt(0))); // <- slot 3 |
| frame_->EmitPush(rax); // <- slot 2 |
| |
| // Push the length of the array and the initial index onto the stack. |
| __ movl(rax, FieldOperand(rax, FixedArray::kLengthOffset)); |
| __ Integer32ToSmi(rax, rax); |
| frame_->EmitPush(rax); // <- slot 1 |
| frame_->EmitPush(Immediate(Smi::FromInt(0))); // <- slot 0 |
| |
| // Condition. |
| entry.Bind(); |
| // Grab the current frame's height for the break and continue |
| // targets only after all the state is pushed on the frame. |
| node->break_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| node->continue_target()->set_direction(JumpTarget::FORWARD_ONLY); |
| |
| __ movq(rax, frame_->ElementAt(0)); // load the current count |
| __ cmpl(rax, frame_->ElementAt(1)); // compare to the array length |
| node->break_target()->Branch(above_equal); |
| |
| // Get the i'th entry of the array. |
| __ movq(rdx, frame_->ElementAt(2)); |
| SmiIndex index = masm_->SmiToIndex(rbx, rax, kPointerSizeLog2); |
| __ movq(rbx, |
| FieldOperand(rdx, index.reg, index.scale, FixedArray::kHeaderSize)); |
| |
| // Get the expected map from the stack or a zero map in the |
| // permanent slow case rax: current iteration count rbx: i'th entry |
| // of the enum cache |
| __ movq(rdx, frame_->ElementAt(3)); |
| // Check if the expected map still matches that of the enumerable. |
| // If not, we have to filter the key. |
| // rax: current iteration count |
| // rbx: i'th entry of the enum cache |
| // rdx: expected map value |
| __ movq(rcx, frame_->ElementAt(4)); |
| __ movq(rcx, FieldOperand(rcx, HeapObject::kMapOffset)); |
| __ cmpq(rcx, rdx); |
| end_del_check.Branch(equal); |
| |
| // Convert the entry to a string (or null if it isn't a property anymore). |
| frame_->EmitPush(frame_->ElementAt(4)); // push enumerable |
| frame_->EmitPush(rbx); // push entry |
| frame_->InvokeBuiltin(Builtins::FILTER_KEY, CALL_FUNCTION, 2); |
| __ movq(rbx, rax); |
| |
| // If the property has been removed while iterating, we just skip it. |
| __ CompareRoot(rbx, Heap::kNullValueRootIndex); |
| node->continue_target()->Branch(equal); |
| |
| end_del_check.Bind(); |
| // Store the entry in the 'each' expression and take another spin in the |
| // loop. rdx: i'th entry of the enum cache (or string there of) |
| frame_->EmitPush(rbx); |
| { Reference each(this, node->each()); |
| // Loading a reference may leave the frame in an unspilled state. |
| frame_->SpillAll(); |
| if (!each.is_illegal()) { |
| if (each.size() > 0) { |
| frame_->EmitPush(frame_->ElementAt(each.size())); |
| } |
| // If the reference was to a slot we rely on the convenient property |
| // that it doesn't matter whether a value (eg, ebx pushed above) is |
| // right on top of or right underneath a zero-sized reference. |
| each.SetValue(NOT_CONST_INIT); |
| if (each.size() > 0) { |
| // It's safe to pop the value lying on top of the reference before |
| // unloading the reference itself (which preserves the top of stack, |
| // ie, now the topmost value of the non-zero sized reference), since |
| // we will discard the top of stack after unloading the reference |
| // anyway. |
| frame_->Drop(); |
| } |
| } |
| } |
| // Unloading a reference may leave the frame in an unspilled state. |
| frame_->SpillAll(); |
| |
| // Discard the i'th entry pushed above or else the remainder of the |
| // reference, whichever is currently on top of the stack. |
| frame_->Drop(); |
| |
| // Body. |
| CheckStack(); // TODO(1222600): ignore if body contains calls. |
| VisitAndSpill(node->body()); |
| |
| // Next. Reestablish a spilled frame in case we are coming here via |
| // a continue in the body. |
| node->continue_target()->Bind(); |
| frame_->SpillAll(); |
| frame_->EmitPop(rax); |
| __ addq(rax, Immediate(Smi::FromInt(1))); |
| frame_->EmitPush(rax); |
| entry.Jump(); |
| |
| // Cleanup. No need to spill because VirtualFrame::Drop is safe for |
| // any frame. |
| node->break_target()->Bind(); |
| frame_->Drop(5); |
| |
| // Exit. |
| exit.Bind(); |
| |
| node->continue_target()->Unuse(); |
| node->break_target()->Unuse(); |
| } |
| |
| void CodeGenerator::VisitTryCatch(TryCatch* node) { |
| ASSERT(!in_spilled_code()); |
| VirtualFrame::SpilledScope spilled_scope; |
| Comment cmnt(masm_, "[ TryCatch"); |
| CodeForStatementPosition(node); |
| |
| JumpTarget try_block; |
| JumpTarget exit; |
| |
| try_block.Call(); |
| // --- Catch block --- |
| frame_->EmitPush(rax); |
| |
| // Store the caught exception in the catch variable. |
| { Reference ref(this, node->catch_var()); |
| ASSERT(ref.is_slot()); |
| // Load the exception to the top of the stack. Here we make use of the |
| // convenient property that it doesn't matter whether a value is |
| // immediately on top of or underneath a zero-sized reference. |
| ref.SetValue(NOT_CONST_INIT); |
| } |
| |
| // Remove the exception from the stack. |
| frame_->Drop(); |
| |
| VisitStatementsAndSpill(node->catch_block()->statements()); |
| if (has_valid_frame()) { |
| exit.Jump(); |
| } |
| |
| |
| // --- Try block --- |
| try_block.Bind(); |
| |
| frame_->PushTryHandler(TRY_CATCH_HANDLER); |
| int handler_height = frame_->height(); |
| |
| // Shadow the jump targets for all escapes from the try block, including |
| // returns. During shadowing, the original target is hidden as the |
| // ShadowTarget and operations on the original actually affect the |
| // shadowing target. |
| // |
| // We should probably try to unify the escaping targets and the return |
| // target. |
| int nof_escapes = node->escaping_targets()->length(); |
| List<ShadowTarget*> shadows(1 + nof_escapes); |
| |
| // Add the shadow target for the function return. |
| static const int kReturnShadowIndex = 0; |
| shadows.Add(new ShadowTarget(&function_return_)); |
| bool function_return_was_shadowed = function_return_is_shadowed_; |
| function_return_is_shadowed_ = true; |
| ASSERT(shadows[kReturnShadowIndex]->other_target() == &function_return_); |
| |
| // Add the remaining shadow targets. |
| for (int i = 0; i < nof_escapes; i++) { |
| shadows.Add(new ShadowTarget(node->escaping_targets()->at(i))); |
| } |
| |
| // Generate code for the statements in the try block. |
| VisitStatementsAndSpill(node->try_block()->statements()); |
| |
| // Stop the introduced shadowing and count the number of required unlinks. |
| // After shadowing stops, the original targets are unshadowed and the |
| // ShadowTargets represent the formerly shadowing targets. |
| bool has_unlinks = false; |
| for (int i = 0; i < shadows.length(); i++) { |
| shadows[i]->StopShadowing(); |
| has_unlinks = has_unlinks || shadows[i]->is_linked(); |
| } |
| function_return_is_shadowed_ = function_return_was_shadowed; |
| |
| // Get an external reference to the handler address. |
| ExternalReference handler_address(Top::k_handler_address); |
| |
| // Make sure that there's nothing left on the stack above the |
| // handler structure. |
| if (FLAG_debug_code) { |
| __ movq(kScratchRegister, handler_address); |
| __ cmpq(rsp, Operand(kScratchRegister, 0)); |
| __ Assert(equal, "stack pointer should point to top handler"); |
| } |
| |
| // If we can fall off the end of the try block, unlink from try chain. |
| if (has_valid_frame()) { |
| // The next handler address is on top of the frame. Unlink from |
| // the handler list and drop the rest of this handler from the |
| // frame. |
| ASSERT(StackHandlerConstants::kNextOffset == 0); |
| __ movq(kScratchRegister, handler_address); |
| frame_->EmitPop(Operand(kScratchRegister, 0)); |
| frame_->Drop(StackHandlerConstants::kSize / kPointerSize - 1); |
| if (has_unlinks) { |
| exit.Jump(); |
| } |
| } |
| |
| // Generate unlink code for the (formerly) shadowing targets that |
| // have been jumped to. Deallocate each shadow target. |
| Result return_value; |
| for (int i = 0; i < shadows.length(); i++) { |
| if (shadows[i]->is_linked()) { |
| // Unlink from try chain; be careful not to destroy the TOS if |
| // there is one. |
| if (i == kReturnShadowIndex) { |
| shadows[i]->Bind(&return_value); |
| return_value.ToRegister(rax); |
| } else { |
| shadows[i]->Bind(); |
| } |
| // Because we can be jumping here (to spilled code) from |
| // unspilled code, we need to reestablish a spilled frame at |
| // this block. |
| frame_->SpillAll(); |
| |
| // Reload sp from the top handler, because some statements that we |
| // break from (eg, for...in) may have left stuff on the stack. |
| __ movq(kScratchRegister, handler_address); |
| __ movq(rsp, Operand(kScratchRegister, 0)); |
| frame_->Forget(frame_->height() - handler_height); |
| |
| ASSERT(StackHandlerConstants::kNextOffset == 0); |
| __ movq(kScratchRegister, handler_address); |
| frame_->EmitPop(Operand(kScratchRegister, 0)); |
| frame_->Drop(StackHandlerConstants::kSize / kPointerSize - 1); |
| |
| if (i == kReturnShadowIndex) { |
| if (!function_return_is_shadowed_) frame_->PrepareForReturn(); |
| shadows[i]->other_target()->Jump(&return_value); |
| } else { |
| shadows[i]->other_target()->Jump(); |
| } |
| } |
| } |
| |
| exit.Bind(); |
| } |
| |
| |
| void CodeGenerator::VisitTryFinally(TryFinally* node) { |
| ASSERT(!in_spilled_code()); |
| VirtualFrame::SpilledScope spilled_scope; |
| Comment cmnt(masm_, "[ TryFinally"); |
| CodeForStatementPosition(node); |
| |
| // State: Used to keep track of reason for entering the finally |
| // block. Should probably be extended to hold information for |
| // break/continue from within the try block. |
| enum { FALLING, THROWING, JUMPING }; |
| |
| JumpTarget try_block; |
| JumpTarget finally_block; |
| |
| try_block.Call(); |
| |
| frame_->EmitPush(rax); |
| // In case of thrown exceptions, this is where we continue. |
| __ movq(rcx, Immediate(Smi::FromInt(THROWING))); |
| finally_block.Jump(); |
| |
| // --- Try block --- |
| try_block.Bind(); |
| |
| frame_->PushTryHandler(TRY_FINALLY_HANDLER); |
| int handler_height = frame_->height(); |
| |
| // Shadow the jump targets for all escapes from the try block, including |
| // returns. During shadowing, the original target is hidden as the |
| // ShadowTarget and operations on the original actually affect the |
| // shadowing target. |
| // |
| // We should probably try to unify the escaping targets and the return |
| // target. |
| int nof_escapes = node->escaping_targets()->length(); |
| List<ShadowTarget*> shadows(1 + nof_escapes); |
| |
| // Add the shadow target for the function return. |
| static const int kReturnShadowIndex = 0; |
| shadows.Add(new ShadowTarget(&function_return_)); |
| bool function_return_was_shadowed = function_return_is_shadowed_; |
| function_return_is_shadowed_ = true; |
| ASSERT(shadows[kReturnShadowIndex]->other_target() == &function_return_); |
| |
| // Add the remaining shadow targets. |
| for (int i = 0; i < nof_escapes; i++) { |
| shadows.Add(new ShadowTarget(node->escaping_targets()->at(i))); |
| } |
| |
| // Generate code for the statements in the try block. |
| VisitStatementsAndSpill(node->try_block()->statements()); |
| |
| // Stop the introduced shadowing and count the number of required unlinks. |
| // After shadowing stops, the original targets are unshadowed and the |
| // ShadowTargets represent the formerly shadowing targets. |
| int nof_unlinks = 0; |
| for (int i = 0; i < shadows.length(); i++) { |
| shadows[i]->StopShadowing(); |
| if (shadows[i]->is_linked()) nof_unlinks++; |
| } |
| function_return_is_shadowed_ = function_return_was_shadowed; |
| |
| // Get an external reference to the handler address. |
| ExternalReference handler_address(Top::k_handler_address); |
| |
| // If we can fall off the end of the try block, unlink from the try |
| // chain and set the state on the frame to FALLING. |
| if (has_valid_frame()) { |
| // The next handler address is on top of the frame. |
| ASSERT(StackHandlerConstants::kNextOffset == 0); |
| __ movq(kScratchRegister, handler_address); |
| frame_->EmitPop(Operand(kScratchRegister, 0)); |
| frame_->Drop(StackHandlerConstants::kSize / kPointerSize - 1); |
| |
| // Fake a top of stack value (unneeded when FALLING) and set the |
| // state in ecx, then jump around the unlink blocks if any. |
| frame_->EmitPush(Heap::kUndefinedValueRootIndex); |
| __ movq(rcx, Immediate(Smi::FromInt(FALLING))); |
| if (nof_unlinks > 0) { |
| finally_block.Jump(); |
| } |
| } |
| |
| // Generate code to unlink and set the state for the (formerly) |
| // shadowing targets that have been jumped to. |
| for (int i = 0; i < shadows.length(); i++) { |
| if (shadows[i]->is_linked()) { |
| // If we have come from the shadowed return, the return value is |
| // on the virtual frame. We must preserve it until it is |
| // pushed. |
| if (i == kReturnShadowIndex) { |
| Result return_value; |
| shadows[i]->Bind(&return_value); |
| return_value.ToRegister(rax); |
| } else { |
| shadows[i]->Bind(); |
| } |
| // Because we can be jumping here (to spilled code) from |
| // unspilled code, we need to reestablish a spilled frame at |
| // this block. |
| frame_->SpillAll(); |
| |
| // Reload sp from the top handler, because some statements that |
| // we break from (eg, for...in) may have left stuff on the |
| // stack. |
| __ movq(kScratchRegister, handler_address); |
| __ movq(rsp, Operand(kScratchRegister, 0)); |
| frame_->Forget(frame_->height() - handler_height); |
| |
| // Unlink this handler and drop it from the frame. |
| ASSERT(StackHandlerConstants::kNextOffset == 0); |
| __ movq(kScratchRegister, handler_address); |
| frame_->EmitPop(Operand(kScratchRegister, 0)); |
| frame_->Drop(StackHandlerConstants::kSize / kPointerSize - 1); |
| |
| if (i == kReturnShadowIndex) { |
| // If this target shadowed the function return, materialize |
| // the return value on the stack. |
| frame_->EmitPush(rax); |
| } else { |
| // Fake TOS for targets that shadowed breaks and continues. |
| frame_->EmitPush(Heap::kUndefinedValueRootIndex); |
| } |
| __ movq(rcx, Immediate(Smi::FromInt(JUMPING + i))); |
| if (--nof_unlinks > 0) { |
| // If this is not the last unlink block, jump around the next. |
| finally_block.Jump(); |
| } |
| } |
| } |
| |
| // --- Finally block --- |
| finally_block.Bind(); |
| |
| // Push the state on the stack. |
| frame_->EmitPush(rcx); |
| |
| // We keep two elements on the stack - the (possibly faked) result |
| // and the state - while evaluating the finally block. |
| // |
| // Generate code for the statements in the finally block. |
| VisitStatementsAndSpill(node->finally_block()->statements()); |
| |
| if (has_valid_frame()) { |
| // Restore state and return value or faked TOS. |
| frame_->EmitPop(rcx); |
| frame_->EmitPop(rax); |
| } |
| |
| // Generate code to jump to the right destination for all used |
| // formerly shadowing targets. Deallocate each shadow target. |
| for (int i = 0; i < shadows.length(); i++) { |
| if (has_valid_frame() && shadows[i]->is_bound()) { |
| BreakTarget* original = shadows[i]->other_target(); |
| __ cmpq(rcx, Immediate(Smi::FromInt(JUMPING + i))); |
| if (i == kReturnShadowIndex) { |
| // The return value is (already) in rax. |
| Result return_value = allocator_->Allocate(rax); |
| ASSERT(return_value.is_valid()); |
| if (function_return_is_shadowed_) { |
| original->Branch(equal, &return_value); |
| } else { |
| // Branch around the preparation for return which may emit |
| // code. |
| JumpTarget skip; |
| skip.Branch(not_equal); |
| frame_->PrepareForReturn(); |
| original->Jump(&return_value); |
| skip.Bind(); |
| } |
| } else { |
| original->Branch(equal); |
| } |
| } |
| } |
| |
| if (has_valid_frame()) { |
| // Check if we need to rethrow the exception. |
| JumpTarget exit; |
| __ cmpq(rcx, Immediate(Smi::FromInt(THROWING))); |
| exit.Branch(not_equal); |
| |
| // Rethrow exception. |
| frame_->EmitPush(rax); // undo pop from above |
| frame_->CallRuntime(Runtime::kReThrow, 1); |
| |
| // Done. |
| exit.Bind(); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitDebuggerStatement(DebuggerStatement* node) { |
| ASSERT(!in_spilled_code()); |
| Comment cmnt(masm_, "[ DebuggerStatement"); |
| CodeForStatementPosition(node); |
| #ifdef ENABLE_DEBUGGER_SUPPORT |
| // Spill everything, even constants, to the frame. |
| frame_->SpillAll(); |
| frame_->CallRuntime(Runtime::kDebugBreak, 0); |
| // Ignore the return value. |
| #endif |
| } |
| |
| |
| void CodeGenerator::InstantiateBoilerplate(Handle<JSFunction> boilerplate) { |
| // Call the runtime to instantiate the function boilerplate object. |
| // The inevitable call will sync frame elements to memory anyway, so |
| // we do it eagerly to allow us to push the arguments directly into |
| // place. |
| ASSERT(boilerplate->IsBoilerplate()); |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| |
| // Push the boilerplate on the stack. |
| __ movq(kScratchRegister, boilerplate, RelocInfo::EMBEDDED_OBJECT); |
| frame_->EmitPush(kScratchRegister); |
| |
| // Create a new closure. |
| frame_->EmitPush(rsi); |
| Result result = frame_->CallRuntime(Runtime::kNewClosure, 2); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::VisitFunctionLiteral(FunctionLiteral* node) { |
| Comment cmnt(masm_, "[ FunctionLiteral"); |
| |
| // Build the function boilerplate and instantiate it. |
| Handle<JSFunction> boilerplate = BuildBoilerplate(node); |
| // Check for stack-overflow exception. |
| if (HasStackOverflow()) return; |
| InstantiateBoilerplate(boilerplate); |
| } |
| |
| |
| void CodeGenerator::VisitFunctionBoilerplateLiteral( |
| FunctionBoilerplateLiteral* node) { |
| Comment cmnt(masm_, "[ FunctionBoilerplateLiteral"); |
| InstantiateBoilerplate(node->boilerplate()); |
| } |
| |
| |
| void CodeGenerator::VisitConditional(Conditional* node) { |
| Comment cmnt(masm_, "[ Conditional"); |
| JumpTarget then; |
| JumpTarget else_; |
| JumpTarget exit; |
| ControlDestination dest(&then, &else_, true); |
| LoadCondition(node->condition(), NOT_INSIDE_TYPEOF, &dest, true); |
| |
| if (dest.false_was_fall_through()) { |
| // The else target was bound, so we compile the else part first. |
| Load(node->else_expression(), typeof_state()); |
| |
| if (then.is_linked()) { |
| exit.Jump(); |
| then.Bind(); |
| Load(node->then_expression(), typeof_state()); |
| } |
| } else { |
| // The then target was bound, so we compile the then part first. |
| Load(node->then_expression(), typeof_state()); |
| |
| if (else_.is_linked()) { |
| exit.Jump(); |
| else_.Bind(); |
| Load(node->else_expression(), typeof_state()); |
| } |
| } |
| |
| exit.Bind(); |
| } |
| |
| |
| void CodeGenerator::VisitSlot(Slot* node) { |
| Comment cmnt(masm_, "[ Slot"); |
| LoadFromSlotCheckForArguments(node, typeof_state()); |
| } |
| |
| |
| void CodeGenerator::VisitVariableProxy(VariableProxy* node) { |
| Comment cmnt(masm_, "[ VariableProxy"); |
| Variable* var = node->var(); |
| Expression* expr = var->rewrite(); |
| if (expr != NULL) { |
| Visit(expr); |
| } else { |
| ASSERT(var->is_global()); |
| Reference ref(this, node); |
| ref.GetValue(typeof_state()); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitLiteral(Literal* node) { |
| Comment cmnt(masm_, "[ Literal"); |
| frame_->Push(node->handle()); |
| } |
| |
| |
| // Materialize the regexp literal 'node' in the literals array |
| // 'literals' of the function. Leave the regexp boilerplate in |
| // 'boilerplate'. |
| class DeferredRegExpLiteral: public DeferredCode { |
| public: |
| DeferredRegExpLiteral(Register boilerplate, |
| Register literals, |
| RegExpLiteral* node) |
| : boilerplate_(boilerplate), literals_(literals), node_(node) { |
| set_comment("[ DeferredRegExpLiteral"); |
| } |
| |
| void Generate(); |
| |
| private: |
| Register boilerplate_; |
| Register literals_; |
| RegExpLiteral* node_; |
| }; |
| |
| |
| void DeferredRegExpLiteral::Generate() { |
| // Since the entry is undefined we call the runtime system to |
| // compute the literal. |
| // Literal array (0). |
| __ push(literals_); |
| // Literal index (1). |
| __ push(Immediate(Smi::FromInt(node_->literal_index()))); |
| // RegExp pattern (2). |
| __ Push(node_->pattern()); |
| // RegExp flags (3). |
| __ Push(node_->flags()); |
| __ CallRuntime(Runtime::kMaterializeRegExpLiteral, 4); |
| if (!boilerplate_.is(rax)) __ movq(boilerplate_, rax); |
| } |
| |
| |
| void CodeGenerator::VisitRegExpLiteral(RegExpLiteral* node) { |
| Comment cmnt(masm_, "[ RegExp Literal"); |
| |
| // Retrieve the literals array and check the allocated entry. Begin |
| // with a writable copy of the function of this activation in a |
| // register. |
| frame_->PushFunction(); |
| Result literals = frame_->Pop(); |
| literals.ToRegister(); |
| frame_->Spill(literals.reg()); |
| |
| // Load the literals array of the function. |
| __ movq(literals.reg(), |
| FieldOperand(literals.reg(), JSFunction::kLiteralsOffset)); |
| |
| // Load the literal at the ast saved index. |
| Result boilerplate = allocator_->Allocate(); |
| ASSERT(boilerplate.is_valid()); |
| int literal_offset = |
| FixedArray::kHeaderSize + node->literal_index() * kPointerSize; |
| __ movq(boilerplate.reg(), FieldOperand(literals.reg(), literal_offset)); |
| |
| // Check whether we need to materialize the RegExp object. If so, |
| // jump to the deferred code passing the literals array. |
| DeferredRegExpLiteral* deferred = |
| new DeferredRegExpLiteral(boilerplate.reg(), literals.reg(), node); |
| __ CompareRoot(boilerplate.reg(), Heap::kUndefinedValueRootIndex); |
| deferred->Branch(equal); |
| deferred->BindExit(); |
| literals.Unuse(); |
| |
| // Push the boilerplate object. |
| frame_->Push(&boilerplate); |
| } |
| |
| |
| // Materialize the object literal 'node' in the literals array |
| // 'literals' of the function. Leave the object boilerplate in |
| // 'boilerplate'. |
| class DeferredObjectLiteral: public DeferredCode { |
| public: |
| DeferredObjectLiteral(Register boilerplate, |
| Register literals, |
| ObjectLiteral* node) |
| : boilerplate_(boilerplate), literals_(literals), node_(node) { |
| set_comment("[ DeferredObjectLiteral"); |
| } |
| |
| void Generate(); |
| |
| private: |
| Register boilerplate_; |
| Register literals_; |
| ObjectLiteral* node_; |
| }; |
| |
| |
| void DeferredObjectLiteral::Generate() { |
| // Since the entry is undefined we call the runtime system to |
| // compute the literal. |
| // Literal array (0). |
| __ push(literals_); |
| // Literal index (1). |
| __ push(Immediate(Smi::FromInt(node_->literal_index()))); |
| // Constant properties (2). |
| __ Push(node_->constant_properties()); |
| __ CallRuntime(Runtime::kCreateObjectLiteralBoilerplate, 3); |
| if (!boilerplate_.is(rax)) __ movq(boilerplate_, rax); |
| } |
| |
| |
| void CodeGenerator::VisitObjectLiteral(ObjectLiteral* node) { |
| Comment cmnt(masm_, "[ ObjectLiteral"); |
| |
| // Retrieve the literals array and check the allocated entry. Begin |
| // with a writable copy of the function of this activation in a |
| // register. |
| frame_->PushFunction(); |
| Result literals = frame_->Pop(); |
| literals.ToRegister(); |
| frame_->Spill(literals.reg()); |
| |
| // Load the literals array of the function. |
| __ movq(literals.reg(), |
| FieldOperand(literals.reg(), JSFunction::kLiteralsOffset)); |
| |
| // Load the literal at the ast saved index. |
| Result boilerplate = allocator_->Allocate(); |
| ASSERT(boilerplate.is_valid()); |
| int literal_offset = |
| FixedArray::kHeaderSize + node->literal_index() * kPointerSize; |
| __ movq(boilerplate.reg(), FieldOperand(literals.reg(), literal_offset)); |
| |
| // Check whether we need to materialize the object literal boilerplate. |
| // If so, jump to the deferred code passing the literals array. |
| DeferredObjectLiteral* deferred = |
| new DeferredObjectLiteral(boilerplate.reg(), literals.reg(), node); |
| __ CompareRoot(boilerplate.reg(), Heap::kUndefinedValueRootIndex); |
| deferred->Branch(equal); |
| deferred->BindExit(); |
| literals.Unuse(); |
| |
| // Push the boilerplate object. |
| frame_->Push(&boilerplate); |
| // Clone the boilerplate object. |
| Runtime::FunctionId clone_function_id = Runtime::kCloneLiteralBoilerplate; |
| if (node->depth() == 1) { |
| clone_function_id = Runtime::kCloneShallowLiteralBoilerplate; |
| } |
| Result clone = frame_->CallRuntime(clone_function_id, 1); |
| // Push the newly cloned literal object as the result. |
| frame_->Push(&clone); |
| |
| for (int i = 0; i < node->properties()->length(); i++) { |
| ObjectLiteral::Property* property = node->properties()->at(i); |
| switch (property->kind()) { |
| case ObjectLiteral::Property::CONSTANT: |
| break; |
| case ObjectLiteral::Property::MATERIALIZED_LITERAL: |
| if (CompileTimeValue::IsCompileTimeValue(property->value())) break; |
| // else fall through. |
| case ObjectLiteral::Property::COMPUTED: { |
| Handle<Object> key(property->key()->handle()); |
| if (key->IsSymbol()) { |
| // Duplicate the object as the IC receiver. |
| frame_->Dup(); |
| Load(property->value()); |
| frame_->Push(key); |
| Result ignored = frame_->CallStoreIC(); |
| // Drop the duplicated receiver and ignore the result. |
| frame_->Drop(); |
| break; |
| } |
| // Fall through |
| } |
| case ObjectLiteral::Property::PROTOTYPE: { |
| // Duplicate the object as an argument to the runtime call. |
| frame_->Dup(); |
| Load(property->key()); |
| Load(property->value()); |
| Result ignored = frame_->CallRuntime(Runtime::kSetProperty, 3); |
| // Ignore the result. |
| break; |
| } |
| case ObjectLiteral::Property::SETTER: { |
| // Duplicate the object as an argument to the runtime call. |
| frame_->Dup(); |
| Load(property->key()); |
| frame_->Push(Smi::FromInt(1)); |
| Load(property->value()); |
| Result ignored = frame_->CallRuntime(Runtime::kDefineAccessor, 4); |
| // Ignore the result. |
| break; |
| } |
| case ObjectLiteral::Property::GETTER: { |
| // Duplicate the object as an argument to the runtime call. |
| frame_->Dup(); |
| Load(property->key()); |
| frame_->Push(Smi::FromInt(0)); |
| Load(property->value()); |
| Result ignored = frame_->CallRuntime(Runtime::kDefineAccessor, 4); |
| // Ignore the result. |
| break; |
| } |
| default: UNREACHABLE(); |
| } |
| } |
| } |
| |
| |
| // Materialize the array literal 'node' in the literals array 'literals' |
| // of the function. Leave the array boilerplate in 'boilerplate'. |
| class DeferredArrayLiteral: public DeferredCode { |
| public: |
| DeferredArrayLiteral(Register boilerplate, |
| Register literals, |
| ArrayLiteral* node) |
| : boilerplate_(boilerplate), literals_(literals), node_(node) { |
| set_comment("[ DeferredArrayLiteral"); |
| } |
| |
| void Generate(); |
| |
| private: |
| Register boilerplate_; |
| Register literals_; |
| ArrayLiteral* node_; |
| }; |
| |
| |
| void DeferredArrayLiteral::Generate() { |
| // Since the entry is undefined we call the runtime system to |
| // compute the literal. |
| // Literal array (0). |
| __ push(literals_); |
| // Literal index (1). |
| __ push(Immediate(Smi::FromInt(node_->literal_index()))); |
| // Constant properties (2). |
| __ Push(node_->literals()); |
| __ CallRuntime(Runtime::kCreateArrayLiteralBoilerplate, 3); |
| if (!boilerplate_.is(rax)) __ movq(boilerplate_, rax); |
| } |
| |
| |
| void CodeGenerator::VisitArrayLiteral(ArrayLiteral* node) { |
| Comment cmnt(masm_, "[ ArrayLiteral"); |
| |
| // Retrieve the literals array and check the allocated entry. Begin |
| // with a writable copy of the function of this activation in a |
| // register. |
| frame_->PushFunction(); |
| Result literals = frame_->Pop(); |
| literals.ToRegister(); |
| frame_->Spill(literals.reg()); |
| |
| // Load the literals array of the function. |
| __ movq(literals.reg(), |
| FieldOperand(literals.reg(), JSFunction::kLiteralsOffset)); |
| |
| // Load the literal at the ast saved index. |
| Result boilerplate = allocator_->Allocate(); |
| ASSERT(boilerplate.is_valid()); |
| int literal_offset = |
| FixedArray::kHeaderSize + node->literal_index() * kPointerSize; |
| __ movq(boilerplate.reg(), FieldOperand(literals.reg(), literal_offset)); |
| |
| // Check whether we need to materialize the object literal boilerplate. |
| // If so, jump to the deferred code passing the literals array. |
| DeferredArrayLiteral* deferred = |
| new DeferredArrayLiteral(boilerplate.reg(), literals.reg(), node); |
| __ CompareRoot(boilerplate.reg(), Heap::kUndefinedValueRootIndex); |
| deferred->Branch(equal); |
| deferred->BindExit(); |
| literals.Unuse(); |
| |
| // Push the resulting array literal boilerplate on the stack. |
| frame_->Push(&boilerplate); |
| // Clone the boilerplate object. |
| Runtime::FunctionId clone_function_id = Runtime::kCloneLiteralBoilerplate; |
| if (node->depth() == 1) { |
| clone_function_id = Runtime::kCloneShallowLiteralBoilerplate; |
| } |
| Result clone = frame_->CallRuntime(clone_function_id, 1); |
| // Push the newly cloned literal object as the result. |
| frame_->Push(&clone); |
| |
| // Generate code to set the elements in the array that are not |
| // literals. |
| for (int i = 0; i < node->values()->length(); i++) { |
| Expression* value = node->values()->at(i); |
| |
| // If value is a literal the property value is already set in the |
| // boilerplate object. |
| if (value->AsLiteral() != NULL) continue; |
| // If value is a materialized literal the property value is already set |
| // in the boilerplate object if it is simple. |
| if (CompileTimeValue::IsCompileTimeValue(value)) continue; |
| |
| // The property must be set by generated code. |
| Load(value); |
| |
| // Get the property value off the stack. |
| Result prop_value = frame_->Pop(); |
| prop_value.ToRegister(); |
| |
| // Fetch the array literal while leaving a copy on the stack and |
| // use it to get the elements array. |
| frame_->Dup(); |
| Result elements = frame_->Pop(); |
| elements.ToRegister(); |
| frame_->Spill(elements.reg()); |
| // Get the elements FixedArray. |
| __ movq(elements.reg(), |
| FieldOperand(elements.reg(), JSObject::kElementsOffset)); |
| |
| // Write to the indexed properties array. |
| int offset = i * kPointerSize + FixedArray::kHeaderSize; |
| __ movq(FieldOperand(elements.reg(), offset), prop_value.reg()); |
| |
| // Update the write barrier for the array address. |
| frame_->Spill(prop_value.reg()); // Overwritten by the write barrier. |
| Result scratch = allocator_->Allocate(); |
| ASSERT(scratch.is_valid()); |
| __ RecordWrite(elements.reg(), offset, prop_value.reg(), scratch.reg()); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitCatchExtensionObject(CatchExtensionObject* node) { |
| ASSERT(!in_spilled_code()); |
| // Call runtime routine to allocate the catch extension object and |
| // assign the exception value to the catch variable. |
| Comment cmnt(masm_, "[ CatchExtensionObject"); |
| Load(node->key()); |
| Load(node->value()); |
| Result result = |
| frame_->CallRuntime(Runtime::kCreateCatchExtensionObject, 2); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::VisitAssignment(Assignment* node) { |
| Comment cmnt(masm_, "[ Assignment"); |
| CodeForStatementPosition(node); |
| |
| { Reference target(this, node->target()); |
| if (target.is_illegal()) { |
| // Fool the virtual frame into thinking that we left the assignment's |
| // value on the frame. |
| frame_->Push(Smi::FromInt(0)); |
| return; |
| } |
| Variable* var = node->target()->AsVariableProxy()->AsVariable(); |
| |
| if (node->starts_initialization_block()) { |
| ASSERT(target.type() == Reference::NAMED || |
| target.type() == Reference::KEYED); |
| // Change to slow case in the beginning of an initialization |
| // block to avoid the quadratic behavior of repeatedly adding |
| // fast properties. |
| |
| // The receiver is the argument to the runtime call. It is the |
| // first value pushed when the reference was loaded to the |
| // frame. |
| frame_->PushElementAt(target.size() - 1); |
| Result ignored = frame_->CallRuntime(Runtime::kToSlowProperties, 1); |
| } |
| if (node->op() == Token::ASSIGN || |
| node->op() == Token::INIT_VAR || |
| node->op() == Token::INIT_CONST) { |
| Load(node->value()); |
| |
| } else { |
| Literal* literal = node->value()->AsLiteral(); |
| bool overwrite_value = |
| (node->value()->AsBinaryOperation() != NULL && |
| node->value()->AsBinaryOperation()->ResultOverwriteAllowed()); |
| Variable* right_var = node->value()->AsVariableProxy()->AsVariable(); |
| // There are two cases where the target is not read in the right hand |
| // side, that are easy to test for: the right hand side is a literal, |
| // or the right hand side is a different variable. TakeValue invalidates |
| // the target, with an implicit promise that it will be written to again |
| // before it is read. |
| if (literal != NULL || (right_var != NULL && right_var != var)) { |
| target.TakeValue(NOT_INSIDE_TYPEOF); |
| } else { |
| target.GetValue(NOT_INSIDE_TYPEOF); |
| } |
| Load(node->value()); |
| GenericBinaryOperation(node->binary_op(), |
| node->type(), |
| overwrite_value ? OVERWRITE_RIGHT : NO_OVERWRITE); |
| } |
| |
| if (var != NULL && |
| var->mode() == Variable::CONST && |
| node->op() != Token::INIT_VAR && node->op() != Token::INIT_CONST) { |
| // Assignment ignored - leave the value on the stack. |
| } else { |
| CodeForSourcePosition(node->position()); |
| if (node->op() == Token::INIT_CONST) { |
| // Dynamic constant initializations must use the function context |
| // and initialize the actual constant declared. Dynamic variable |
| // initializations are simply assignments and use SetValue. |
| target.SetValue(CONST_INIT); |
| } else { |
| target.SetValue(NOT_CONST_INIT); |
| } |
| if (node->ends_initialization_block()) { |
| ASSERT(target.type() == Reference::NAMED || |
| target.type() == Reference::KEYED); |
| // End of initialization block. Revert to fast case. The |
| // argument to the runtime call is the receiver, which is the |
| // first value pushed as part of the reference, which is below |
| // the lhs value. |
| frame_->PushElementAt(target.size()); |
| Result ignored = frame_->CallRuntime(Runtime::kToFastProperties, 1); |
| } |
| } |
| } |
| } |
| |
| |
| void CodeGenerator::VisitThrow(Throw* node) { |
| Comment cmnt(masm_, "[ Throw"); |
| CodeForStatementPosition(node); |
| |
| Load(node->exception()); |
| Result result = frame_->CallRuntime(Runtime::kThrow, 1); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::VisitProperty(Property* node) { |
| Comment cmnt(masm_, "[ Property"); |
| Reference property(this, node); |
| property.GetValue(typeof_state()); |
| } |
| |
| |
| void CodeGenerator::VisitCall(Call* node) { |
| Comment cmnt(masm_, "[ Call"); |
| |
| ZoneList<Expression*>* args = node->arguments(); |
| |
| CodeForStatementPosition(node); |
| |
| // Check if the function is a variable or a property. |
| Expression* function = node->expression(); |
| Variable* var = function->AsVariableProxy()->AsVariable(); |
| Property* property = function->AsProperty(); |
| |
| // ------------------------------------------------------------------------ |
| // Fast-case: Use inline caching. |
| // --- |
| // According to ECMA-262, section 11.2.3, page 44, the function to call |
| // must be resolved after the arguments have been evaluated. The IC code |
| // automatically handles this by loading the arguments before the function |
| // is resolved in cache misses (this also holds for megamorphic calls). |
| // ------------------------------------------------------------------------ |
| |
| if (var != NULL && !var->is_this() && var->is_global()) { |
| // ---------------------------------- |
| // JavaScript example: 'foo(1, 2, 3)' // foo is global |
| // ---------------------------------- |
| |
| // Push the name of the function and the receiver onto the stack. |
| frame_->Push(var->name()); |
| |
| // Pass the global object as the receiver and let the IC stub |
| // patch the stack to use the global proxy as 'this' in the |
| // invoked function. |
| LoadGlobal(); |
| |
| // Load the arguments. |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| // Call the IC initialization code. |
| CodeForSourcePosition(node->position()); |
| Result result = frame_->CallCallIC(RelocInfo::CODE_TARGET_CONTEXT, |
| arg_count, |
| loop_nesting()); |
| frame_->RestoreContextRegister(); |
| // Replace the function on the stack with the result. |
| frame_->SetElementAt(0, &result); |
| } else if (var != NULL && var->slot() != NULL && |
| var->slot()->type() == Slot::LOOKUP) { |
| // ---------------------------------- |
| // JavaScript example: 'with (obj) foo(1, 2, 3)' // foo is in obj |
| // ---------------------------------- |
| |
| // Load the function from the context. Sync the frame so we can |
| // push the arguments directly into place. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| frame_->EmitPush(rsi); |
| frame_->EmitPush(var->name()); |
| frame_->CallRuntime(Runtime::kLoadContextSlot, 2); |
| // The runtime call returns a pair of values in rax and rdx. The |
| // looked-up function is in rax and the receiver is in rdx. These |
| // register references are not ref counted here. We spill them |
| // eagerly since they are arguments to an inevitable call (and are |
| // not sharable by the arguments). |
| ASSERT(!allocator()->is_used(rax)); |
| frame_->EmitPush(rax); |
| |
| // Load the receiver. |
| ASSERT(!allocator()->is_used(rdx)); |
| frame_->EmitPush(rdx); |
| |
| // Call the function. |
| CallWithArguments(args, node->position()); |
| } else if (property != NULL) { |
| // Check if the key is a literal string. |
| Literal* literal = property->key()->AsLiteral(); |
| |
| if (literal != NULL && literal->handle()->IsSymbol()) { |
| // ------------------------------------------------------------------ |
| // JavaScript example: 'object.foo(1, 2, 3)' or 'map["key"](1, 2, 3)' |
| // ------------------------------------------------------------------ |
| |
| Handle<String> name = Handle<String>::cast(literal->handle()); |
| |
| if (ArgumentsMode() == LAZY_ARGUMENTS_ALLOCATION && |
| name->IsEqualTo(CStrVector("apply")) && |
| args->length() == 2 && |
| args->at(1)->AsVariableProxy() != NULL && |
| args->at(1)->AsVariableProxy()->IsArguments()) { |
| // Use the optimized Function.prototype.apply that avoids |
| // allocating lazily allocated arguments objects. |
| CallApplyLazy(property, |
| args->at(0), |
| args->at(1)->AsVariableProxy(), |
| node->position()); |
| |
| } else { |
| // Push the name of the function and the receiver onto the stack. |
| frame_->Push(name); |
| Load(property->obj()); |
| |
| // Load the arguments. |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| // Call the IC initialization code. |
| CodeForSourcePosition(node->position()); |
| Result result = frame_->CallCallIC(RelocInfo::CODE_TARGET, |
| arg_count, |
| loop_nesting()); |
| frame_->RestoreContextRegister(); |
| // Replace the function on the stack with the result. |
| frame_->SetElementAt(0, &result); |
| } |
| |
| } else { |
| // ------------------------------------------- |
| // JavaScript example: 'array[index](1, 2, 3)' |
| // ------------------------------------------- |
| |
| // Load the function to call from the property through a reference. |
| Reference ref(this, property); |
| ref.GetValue(NOT_INSIDE_TYPEOF); |
| |
| // Pass receiver to called function. |
| if (property->is_synthetic()) { |
| // Use global object as receiver. |
| LoadGlobalReceiver(); |
| } else { |
| // The reference's size is non-negative. |
| frame_->PushElementAt(ref.size()); |
| } |
| |
| // Call the function. |
| CallWithArguments(args, node->position()); |
| } |
| } else { |
| // ---------------------------------- |
| // JavaScript example: 'foo(1, 2, 3)' // foo is not global |
| // ---------------------------------- |
| |
| // Load the function. |
| Load(function); |
| |
| // Pass the global proxy as the receiver. |
| LoadGlobalReceiver(); |
| |
| // Call the function. |
| CallWithArguments(args, node->position()); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitCallEval(CallEval* node) { |
| Comment cmnt(masm_, "[ CallEval"); |
| |
| // In a call to eval, we first call %ResolvePossiblyDirectEval to resolve |
| // the function we need to call and the receiver of the call. |
| // Then we call the resolved function using the given arguments. |
| |
| ZoneList<Expression*>* args = node->arguments(); |
| Expression* function = node->expression(); |
| |
| CodeForStatementPosition(node); |
| |
| // Prepare the stack for the call to the resolved function. |
| Load(function); |
| |
| // Allocate a frame slot for the receiver. |
| frame_->Push(Factory::undefined_value()); |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| // Prepare the stack for the call to ResolvePossiblyDirectEval. |
| frame_->PushElementAt(arg_count + 1); |
| if (arg_count > 0) { |
| frame_->PushElementAt(arg_count); |
| } else { |
| frame_->Push(Factory::undefined_value()); |
| } |
| |
| // Resolve the call. |
| Result result = |
| frame_->CallRuntime(Runtime::kResolvePossiblyDirectEval, 2); |
| |
| // Touch up the stack with the right values for the function and the |
| // receiver. Use a scratch register to avoid destroying the result. |
| Result scratch = allocator_->Allocate(); |
| ASSERT(scratch.is_valid()); |
| __ movq(scratch.reg(), |
| FieldOperand(result.reg(), FixedArray::OffsetOfElementAt(0))); |
| frame_->SetElementAt(arg_count + 1, &scratch); |
| |
| // We can reuse the result register now. |
| frame_->Spill(result.reg()); |
| __ movq(result.reg(), |
| FieldOperand(result.reg(), FixedArray::OffsetOfElementAt(1))); |
| frame_->SetElementAt(arg_count, &result); |
| |
| // Call the function. |
| CodeForSourcePosition(node->position()); |
| InLoopFlag in_loop = loop_nesting() > 0 ? IN_LOOP : NOT_IN_LOOP; |
| CallFunctionStub call_function(arg_count, in_loop); |
| result = frame_->CallStub(&call_function, arg_count + 1); |
| |
| // Restore the context and overwrite the function on the stack with |
| // the result. |
| frame_->RestoreContextRegister(); |
| frame_->SetElementAt(0, &result); |
| } |
| |
| |
| void CodeGenerator::VisitCallNew(CallNew* node) { |
| Comment cmnt(masm_, "[ CallNew"); |
| CodeForStatementPosition(node); |
| |
| // According to ECMA-262, section 11.2.2, page 44, the function |
| // expression in new calls must be evaluated before the |
| // arguments. This is different from ordinary calls, where the |
| // actual function to call is resolved after the arguments have been |
| // evaluated. |
| |
| // Compute function to call and use the global object as the |
| // receiver. There is no need to use the global proxy here because |
| // it will always be replaced with a newly allocated object. |
| Load(node->expression()); |
| LoadGlobal(); |
| |
| // Push the arguments ("left-to-right") on the stack. |
| ZoneList<Expression*>* args = node->arguments(); |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| // Call the construct call builtin that handles allocation and |
| // constructor invocation. |
| CodeForSourcePosition(node->position()); |
| Result result = frame_->CallConstructor(arg_count); |
| // Replace the function on the stack with the result. |
| frame_->SetElementAt(0, &result); |
| } |
| |
| |
| void CodeGenerator::VisitCallRuntime(CallRuntime* node) { |
| if (CheckForInlineRuntimeCall(node)) { |
| return; |
| } |
| |
| ZoneList<Expression*>* args = node->arguments(); |
| Comment cmnt(masm_, "[ CallRuntime"); |
| Runtime::Function* function = node->function(); |
| |
| if (function == NULL) { |
| // Prepare stack for calling JS runtime function. |
| frame_->Push(node->name()); |
| // Push the builtins object found in the current global object. |
| Result temp = allocator()->Allocate(); |
| ASSERT(temp.is_valid()); |
| __ movq(temp.reg(), GlobalObject()); |
| __ movq(temp.reg(), |
| FieldOperand(temp.reg(), GlobalObject::kBuiltinsOffset)); |
| frame_->Push(&temp); |
| } |
| |
| // Push the arguments ("left-to-right"). |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| if (function == NULL) { |
| // Call the JS runtime function. |
| Result answer = frame_->CallCallIC(RelocInfo::CODE_TARGET, |
| arg_count, |
| loop_nesting_); |
| frame_->RestoreContextRegister(); |
| frame_->SetElementAt(0, &answer); |
| } else { |
| // Call the C runtime function. |
| Result answer = frame_->CallRuntime(function, arg_count); |
| frame_->Push(&answer); |
| } |
| } |
| |
| |
| void CodeGenerator::VisitUnaryOperation(UnaryOperation* node) { |
| // Note that because of NOT and an optimization in comparison of a typeof |
| // expression to a literal string, this function can fail to leave a value |
| // on top of the frame or in the cc register. |
| Comment cmnt(masm_, "[ UnaryOperation"); |
| |
| Token::Value op = node->op(); |
| |
| if (op == Token::NOT) { |
| // Swap the true and false targets but keep the same actual label |
| // as the fall through. |
| destination()->Invert(); |
| LoadCondition(node->expression(), NOT_INSIDE_TYPEOF, destination(), true); |
| // Swap the labels back. |
| destination()->Invert(); |
| |
| } else if (op == Token::DELETE) { |
| Property* property = node->expression()->AsProperty(); |
| if (property != NULL) { |
| Load(property->obj()); |
| Load(property->key()); |
| Result answer = frame_->InvokeBuiltin(Builtins::DELETE, CALL_FUNCTION, 2); |
| frame_->Push(&answer); |
| return; |
| } |
| |
| Variable* variable = node->expression()->AsVariableProxy()->AsVariable(); |
| if (variable != NULL) { |
| Slot* slot = variable->slot(); |
| if (variable->is_global()) { |
| LoadGlobal(); |
| frame_->Push(variable->name()); |
| Result answer = frame_->InvokeBuiltin(Builtins::DELETE, |
| CALL_FUNCTION, 2); |
| frame_->Push(&answer); |
| return; |
| |
| } else if (slot != NULL && slot->type() == Slot::LOOKUP) { |
| // Call the runtime to look up the context holding the named |
| // variable. Sync the virtual frame eagerly so we can push the |
| // arguments directly into place. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| frame_->EmitPush(rsi); |
| frame_->EmitPush(variable->name()); |
| Result context = frame_->CallRuntime(Runtime::kLookupContext, 2); |
| ASSERT(context.is_register()); |
| frame_->EmitPush(context.reg()); |
| context.Unuse(); |
| frame_->EmitPush(variable->name()); |
| Result answer = frame_->InvokeBuiltin(Builtins::DELETE, |
| CALL_FUNCTION, 2); |
| frame_->Push(&answer); |
| return; |
| } |
| |
| // Default: Result of deleting non-global, not dynamically |
| // introduced variables is false. |
| frame_->Push(Factory::false_value()); |
| |
| } else { |
| // Default: Result of deleting expressions is true. |
| Load(node->expression()); // may have side-effects |
| frame_->SetElementAt(0, Factory::true_value()); |
| } |
| |
| } else if (op == Token::TYPEOF) { |
| // Special case for loading the typeof expression; see comment on |
| // LoadTypeofExpression(). |
| LoadTypeofExpression(node->expression()); |
| Result answer = frame_->CallRuntime(Runtime::kTypeof, 1); |
| frame_->Push(&answer); |
| |
| } else if (op == Token::VOID) { |
| Expression* expression = node->expression(); |
| if (expression && expression->AsLiteral() && ( |
| expression->AsLiteral()->IsTrue() || |
| expression->AsLiteral()->IsFalse() || |
| expression->AsLiteral()->handle()->IsNumber() || |
| expression->AsLiteral()->handle()->IsString() || |
| expression->AsLiteral()->handle()->IsJSRegExp() || |
| expression->AsLiteral()->IsNull())) { |
| // Omit evaluating the value of the primitive literal. |
| // It will be discarded anyway, and can have no side effect. |
| frame_->Push(Factory::undefined_value()); |
| } else { |
| Load(node->expression()); |
| frame_->SetElementAt(0, Factory::undefined_value()); |
| } |
| |
| } else { |
| Load(node->expression()); |
| switch (op) { |
| case Token::NOT: |
| case Token::DELETE: |
| case Token::TYPEOF: |
| UNREACHABLE(); // handled above |
| break; |
| |
| case Token::SUB: { |
| bool overwrite = |
| (node->AsBinaryOperation() != NULL && |
| node->AsBinaryOperation()->ResultOverwriteAllowed()); |
| UnarySubStub stub(overwrite); |
| // TODO(1222589): remove dependency of TOS being cached inside stub |
| Result operand = frame_->Pop(); |
| Result answer = frame_->CallStub(&stub, &operand); |
| frame_->Push(&answer); |
| break; |
| } |
| |
| case Token::BIT_NOT: { |
| // Smi check. |
| JumpTarget smi_label; |
| JumpTarget continue_label; |
| Result operand = frame_->Pop(); |
| operand.ToRegister(); |
| |
| Condition is_smi = masm_->CheckSmi(operand.reg()); |
| smi_label.Branch(is_smi, &operand); |
| |
| frame_->Push(&operand); // undo popping of TOS |
| Result answer = frame_->InvokeBuiltin(Builtins::BIT_NOT, |
| CALL_FUNCTION, 1); |
| continue_label.Jump(&answer); |
| smi_label.Bind(&answer); |
| answer.ToRegister(); |
| frame_->Spill(answer.reg()); |
| __ SmiNot(answer.reg(), answer.reg()); |
| continue_label.Bind(&answer); |
| frame_->Push(&answer); |
| break; |
| } |
| |
| case Token::ADD: { |
| // Smi check. |
| JumpTarget continue_label; |
| Result operand = frame_->Pop(); |
| operand.ToRegister(); |
| Condition is_smi = masm_->CheckSmi(operand.reg()); |
| continue_label.Branch(is_smi, &operand); |
| frame_->Push(&operand); |
| Result answer = frame_->InvokeBuiltin(Builtins::TO_NUMBER, |
| CALL_FUNCTION, 1); |
| |
| continue_label.Bind(&answer); |
| frame_->Push(&answer); |
| break; |
| } |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| } |
| |
| |
| // The value in dst was optimistically incremented or decremented. The |
| // result overflowed or was not smi tagged. Undo the operation, call |
| // into the runtime to convert the argument to a number, and call the |
| // specialized add or subtract stub. The result is left in dst. |
| class DeferredPrefixCountOperation: public DeferredCode { |
| public: |
| DeferredPrefixCountOperation(Register dst, bool is_increment) |
| : dst_(dst), is_increment_(is_increment) { |
| set_comment("[ DeferredCountOperation"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Register dst_; |
| bool is_increment_; |
| }; |
| |
| |
| void DeferredPrefixCountOperation::Generate() { |
| __ push(dst_); |
| __ InvokeBuiltin(Builtins::TO_NUMBER, CALL_FUNCTION); |
| __ push(rax); |
| __ push(Immediate(Smi::FromInt(1))); |
| if (is_increment_) { |
| __ CallRuntime(Runtime::kNumberAdd, 2); |
| } else { |
| __ CallRuntime(Runtime::kNumberSub, 2); |
| } |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| // The value in dst was optimistically incremented or decremented. The |
| // result overflowed or was not smi tagged. Undo the operation and call |
| // into the runtime to convert the argument to a number. Update the |
| // original value in old. Call the specialized add or subtract stub. |
| // The result is left in dst. |
| class DeferredPostfixCountOperation: public DeferredCode { |
| public: |
| DeferredPostfixCountOperation(Register dst, Register old, bool is_increment) |
| : dst_(dst), old_(old), is_increment_(is_increment) { |
| set_comment("[ DeferredCountOperation"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Register dst_; |
| Register old_; |
| bool is_increment_; |
| }; |
| |
| |
| void DeferredPostfixCountOperation::Generate() { |
| __ push(dst_); |
| __ InvokeBuiltin(Builtins::TO_NUMBER, CALL_FUNCTION); |
| |
| // Save the result of ToNumber to use as the old value. |
| __ push(rax); |
| |
| // Call the runtime for the addition or subtraction. |
| __ push(rax); |
| __ push(Immediate(Smi::FromInt(1))); |
| if (is_increment_) { |
| __ CallRuntime(Runtime::kNumberAdd, 2); |
| } else { |
| __ CallRuntime(Runtime::kNumberSub, 2); |
| } |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| __ pop(old_); |
| } |
| |
| |
| void CodeGenerator::VisitCountOperation(CountOperation* node) { |
| Comment cmnt(masm_, "[ CountOperation"); |
| |
| bool is_postfix = node->is_postfix(); |
| bool is_increment = node->op() == Token::INC; |
| |
| Variable* var = node->expression()->AsVariableProxy()->AsVariable(); |
| bool is_const = (var != NULL && var->mode() == Variable::CONST); |
| |
| // Postfix operations need a stack slot under the reference to hold |
| // the old value while the new value is being stored. This is so that |
| // in the case that storing the new value requires a call, the old |
| // value will be in the frame to be spilled. |
| if (is_postfix) frame_->Push(Smi::FromInt(0)); |
| |
| { Reference target(this, node->expression()); |
| if (target.is_illegal()) { |
| // Spoof the virtual frame to have the expected height (one higher |
| // than on entry). |
| if (!is_postfix) frame_->Push(Smi::FromInt(0)); |
| return; |
| } |
| target.TakeValue(NOT_INSIDE_TYPEOF); |
| |
| Result new_value = frame_->Pop(); |
| new_value.ToRegister(); |
| |
| Result old_value; // Only allocated in the postfix case. |
| if (is_postfix) { |
| // Allocate a temporary to preserve the old value. |
| old_value = allocator_->Allocate(); |
| ASSERT(old_value.is_valid()); |
| __ movq(old_value.reg(), new_value.reg()); |
| } |
| // Ensure the new value is writable. |
| frame_->Spill(new_value.reg()); |
| |
| DeferredCode* deferred = NULL; |
| if (is_postfix) { |
| deferred = new DeferredPostfixCountOperation(new_value.reg(), |
| old_value.reg(), |
| is_increment); |
| } else { |
| deferred = new DeferredPrefixCountOperation(new_value.reg(), |
| is_increment); |
| } |
| |
| __ movq(kScratchRegister, new_value.reg()); |
| if (is_increment) { |
| __ addl(kScratchRegister, Immediate(Smi::FromInt(1))); |
| } else { |
| __ subl(kScratchRegister, Immediate(Smi::FromInt(1))); |
| } |
| // Smi test. |
| deferred->Branch(overflow); |
| __ JumpIfNotSmi(kScratchRegister, deferred->entry_label()); |
| __ movq(new_value.reg(), kScratchRegister); |
| deferred->BindExit(); |
| |
| // Postfix: store the old value in the allocated slot under the |
| // reference. |
| if (is_postfix) frame_->SetElementAt(target.size(), &old_value); |
| |
| frame_->Push(&new_value); |
| // Non-constant: update the reference. |
| if (!is_const) target.SetValue(NOT_CONST_INIT); |
| } |
| |
| // Postfix: drop the new value and use the old. |
| if (is_postfix) frame_->Drop(); |
| } |
| |
| |
| void CodeGenerator::VisitBinaryOperation(BinaryOperation* node) { |
| // TODO(X64): This code was copied verbatim from codegen-ia32. |
| // Either find a reason to change it or move it to a shared location. |
| |
| // Note that due to an optimization in comparison operations (typeof |
| // compared to a string literal), we can evaluate a binary expression such |
| // as AND or OR and not leave a value on the frame or in the cc register. |
| Comment cmnt(masm_, "[ BinaryOperation"); |
| Token::Value op = node->op(); |
| |
| // According to ECMA-262 section 11.11, page 58, the binary logical |
| // operators must yield the result of one of the two expressions |
| // before any ToBoolean() conversions. This means that the value |
| // produced by a && or || operator is not necessarily a boolean. |
| |
| // NOTE: If the left hand side produces a materialized value (not |
| // control flow), we force the right hand side to do the same. This |
| // is necessary because we assume that if we get control flow on the |
| // last path out of an expression we got it on all paths. |
| if (op == Token::AND) { |
| JumpTarget is_true; |
| ControlDestination dest(&is_true, destination()->false_target(), true); |
| LoadCondition(node->left(), NOT_INSIDE_TYPEOF, &dest, false); |
| |
| if (dest.false_was_fall_through()) { |
| // The current false target was used as the fall-through. If |
| // there are no dangling jumps to is_true then the left |
| // subexpression was unconditionally false. Otherwise we have |
| // paths where we do have to evaluate the right subexpression. |
| if (is_true.is_linked()) { |
| // We need to compile the right subexpression. If the jump to |
| // the current false target was a forward jump then we have a |
| // valid frame, we have just bound the false target, and we |
| // have to jump around the code for the right subexpression. |
| if (has_valid_frame()) { |
| destination()->false_target()->Unuse(); |
| destination()->false_target()->Jump(); |
| } |
| is_true.Bind(); |
| // The left subexpression compiled to control flow, so the |
| // right one is free to do so as well. |
| LoadCondition(node->right(), NOT_INSIDE_TYPEOF, destination(), false); |
| } else { |
| // We have actually just jumped to or bound the current false |
| // target but the current control destination is not marked as |
| // used. |
| destination()->Use(false); |
| } |
| |
| } else if (dest.is_used()) { |
| // The left subexpression compiled to control flow (and is_true |
| // was just bound), so the right is free to do so as well. |
| LoadCondition(node->right(), NOT_INSIDE_TYPEOF, destination(), false); |
| |
| } else { |
| // We have a materialized value on the frame, so we exit with |
| // one on all paths. There are possibly also jumps to is_true |
| // from nested subexpressions. |
| JumpTarget pop_and_continue; |
| JumpTarget exit; |
| |
| // Avoid popping the result if it converts to 'false' using the |
| // standard ToBoolean() conversion as described in ECMA-262, |
| // section 9.2, page 30. |
| // |
| // Duplicate the TOS value. The duplicate will be popped by |
| // ToBoolean. |
| frame_->Dup(); |
| ControlDestination dest(&pop_and_continue, &exit, true); |
| ToBoolean(&dest); |
| |
| // Pop the result of evaluating the first part. |
| frame_->Drop(); |
| |
| // Compile right side expression. |
| is_true.Bind(); |
| Load(node->right()); |
| |
| // Exit (always with a materialized value). |
| exit.Bind(); |
| } |
| |
| } else if (op == Token::OR) { |
| JumpTarget is_false; |
| ControlDestination dest(destination()->true_target(), &is_false, false); |
| LoadCondition(node->left(), NOT_INSIDE_TYPEOF, &dest, false); |
| |
| if (dest.true_was_fall_through()) { |
| // The current true target was used as the fall-through. If |
| // there are no dangling jumps to is_false then the left |
| // subexpression was unconditionally true. Otherwise we have |
| // paths where we do have to evaluate the right subexpression. |
| if (is_false.is_linked()) { |
| // We need to compile the right subexpression. If the jump to |
| // the current true target was a forward jump then we have a |
| // valid frame, we have just bound the true target, and we |
| // have to jump around the code for the right subexpression. |
| if (has_valid_frame()) { |
| destination()->true_target()->Unuse(); |
| destination()->true_target()->Jump(); |
| } |
| is_false.Bind(); |
| // The left subexpression compiled to control flow, so the |
| // right one is free to do so as well. |
| LoadCondition(node->right(), NOT_INSIDE_TYPEOF, destination(), false); |
| } else { |
| // We have just jumped to or bound the current true target but |
| // the current control destination is not marked as used. |
| destination()->Use(true); |
| } |
| |
| } else if (dest.is_used()) { |
| // The left subexpression compiled to control flow (and is_false |
| // was just bound), so the right is free to do so as well. |
| LoadCondition(node->right(), NOT_INSIDE_TYPEOF, destination(), false); |
| |
| } else { |
| // We have a materialized value on the frame, so we exit with |
| // one on all paths. There are possibly also jumps to is_false |
| // from nested subexpressions. |
| JumpTarget pop_and_continue; |
| JumpTarget exit; |
| |
| // Avoid popping the result if it converts to 'true' using the |
| // standard ToBoolean() conversion as described in ECMA-262, |
| // section 9.2, page 30. |
| // |
| // Duplicate the TOS value. The duplicate will be popped by |
| // ToBoolean. |
| frame_->Dup(); |
| ControlDestination dest(&exit, &pop_and_continue, false); |
| ToBoolean(&dest); |
| |
| // Pop the result of evaluating the first part. |
| frame_->Drop(); |
| |
| // Compile right side expression. |
| is_false.Bind(); |
| Load(node->right()); |
| |
| // Exit (always with a materialized value). |
| exit.Bind(); |
| } |
| |
| } else { |
| // NOTE: The code below assumes that the slow cases (calls to runtime) |
| // never return a constant/immutable object. |
| OverwriteMode overwrite_mode = NO_OVERWRITE; |
| if (node->left()->AsBinaryOperation() != NULL && |
| node->left()->AsBinaryOperation()->ResultOverwriteAllowed()) { |
| overwrite_mode = OVERWRITE_LEFT; |
| } else if (node->right()->AsBinaryOperation() != NULL && |
| node->right()->AsBinaryOperation()->ResultOverwriteAllowed()) { |
| overwrite_mode = OVERWRITE_RIGHT; |
| } |
| |
| Load(node->left()); |
| Load(node->right()); |
| GenericBinaryOperation(node->op(), node->type(), overwrite_mode); |
| } |
| } |
| |
| |
| |
| void CodeGenerator::VisitCompareOperation(CompareOperation* node) { |
| Comment cmnt(masm_, "[ CompareOperation"); |
| |
| // Get the expressions from the node. |
| Expression* left = node->left(); |
| Expression* right = node->right(); |
| Token::Value op = node->op(); |
| // To make typeof testing for natives implemented in JavaScript really |
| // efficient, we generate special code for expressions of the form: |
| // 'typeof <expression> == <string>'. |
| UnaryOperation* operation = left->AsUnaryOperation(); |
| if ((op == Token::EQ || op == Token::EQ_STRICT) && |
| (operation != NULL && operation->op() == Token::TYPEOF) && |
| (right->AsLiteral() != NULL && |
| right->AsLiteral()->handle()->IsString())) { |
| Handle<String> check(Handle<String>::cast(right->AsLiteral()->handle())); |
| |
| // Load the operand and move it to a register. |
| LoadTypeofExpression(operation->expression()); |
| Result answer = frame_->Pop(); |
| answer.ToRegister(); |
| |
| if (check->Equals(Heap::number_symbol())) { |
| Condition is_smi = masm_->CheckSmi(answer.reg()); |
| destination()->true_target()->Branch(is_smi); |
| frame_->Spill(answer.reg()); |
| __ movq(answer.reg(), FieldOperand(answer.reg(), HeapObject::kMapOffset)); |
| __ CompareRoot(answer.reg(), Heap::kHeapNumberMapRootIndex); |
| answer.Unuse(); |
| destination()->Split(equal); |
| |
| } else if (check->Equals(Heap::string_symbol())) { |
| Condition is_smi = masm_->CheckSmi(answer.reg()); |
| destination()->false_target()->Branch(is_smi); |
| |
| // It can be an undetectable string object. |
| __ movq(kScratchRegister, |
| FieldOperand(answer.reg(), HeapObject::kMapOffset)); |
| __ testb(FieldOperand(kScratchRegister, Map::kBitFieldOffset), |
| Immediate(1 << Map::kIsUndetectable)); |
| destination()->false_target()->Branch(not_zero); |
| __ CmpInstanceType(kScratchRegister, FIRST_NONSTRING_TYPE); |
| answer.Unuse(); |
| destination()->Split(below); // Unsigned byte comparison needed. |
| |
| } else if (check->Equals(Heap::boolean_symbol())) { |
| __ CompareRoot(answer.reg(), Heap::kTrueValueRootIndex); |
| destination()->true_target()->Branch(equal); |
| __ CompareRoot(answer.reg(), Heap::kFalseValueRootIndex); |
| answer.Unuse(); |
| destination()->Split(equal); |
| |
| } else if (check->Equals(Heap::undefined_symbol())) { |
| __ CompareRoot(answer.reg(), Heap::kUndefinedValueRootIndex); |
| destination()->true_target()->Branch(equal); |
| |
| Condition is_smi = masm_->CheckSmi(answer.reg()); |
| destination()->false_target()->Branch(is_smi); |
| |
| // It can be an undetectable object. |
| __ movq(kScratchRegister, |
| FieldOperand(answer.reg(), HeapObject::kMapOffset)); |
| __ testb(FieldOperand(kScratchRegister, Map::kBitFieldOffset), |
| Immediate(1 << Map::kIsUndetectable)); |
| answer.Unuse(); |
| destination()->Split(not_zero); |
| |
| } else if (check->Equals(Heap::function_symbol())) { |
| Condition is_smi = masm_->CheckSmi(answer.reg()); |
| destination()->false_target()->Branch(is_smi); |
| frame_->Spill(answer.reg()); |
| __ CmpObjectType(answer.reg(), JS_FUNCTION_TYPE, answer.reg()); |
| answer.Unuse(); |
| destination()->Split(equal); |
| |
| } else if (check->Equals(Heap::object_symbol())) { |
| Condition is_smi = masm_->CheckSmi(answer.reg()); |
| destination()->false_target()->Branch(is_smi); |
| __ CompareRoot(answer.reg(), Heap::kNullValueRootIndex); |
| destination()->true_target()->Branch(equal); |
| |
| // It can be an undetectable object. |
| __ movq(kScratchRegister, |
| FieldOperand(answer.reg(), HeapObject::kMapOffset)); |
| __ testb(FieldOperand(kScratchRegister, Map::kBitFieldOffset), |
| Immediate(1 << Map::kIsUndetectable)); |
| destination()->false_target()->Branch(not_zero); |
| __ CmpInstanceType(kScratchRegister, FIRST_JS_OBJECT_TYPE); |
| destination()->false_target()->Branch(below); |
| __ CmpInstanceType(kScratchRegister, LAST_JS_OBJECT_TYPE); |
| answer.Unuse(); |
| destination()->Split(below_equal); |
| } else { |
| // Uncommon case: typeof testing against a string literal that is |
| // never returned from the typeof operator. |
| answer.Unuse(); |
| destination()->Goto(false); |
| } |
| return; |
| } |
| |
| Condition cc = no_condition; |
| bool strict = false; |
| switch (op) { |
| case Token::EQ_STRICT: |
| strict = true; |
| // Fall through |
| case Token::EQ: |
| cc = equal; |
| break; |
| case Token::LT: |
| cc = less; |
| break; |
| case Token::GT: |
| cc = greater; |
| break; |
| case Token::LTE: |
| cc = less_equal; |
| break; |
| case Token::GTE: |
| cc = greater_equal; |
| break; |
| case Token::IN: { |
| Load(left); |
| Load(right); |
| Result answer = frame_->InvokeBuiltin(Builtins::IN, CALL_FUNCTION, 2); |
| frame_->Push(&answer); // push the result |
| return; |
| } |
| case Token::INSTANCEOF: { |
| Load(left); |
| Load(right); |
| InstanceofStub stub; |
| Result answer = frame_->CallStub(&stub, 2); |
| answer.ToRegister(); |
| __ testq(answer.reg(), answer.reg()); |
| answer.Unuse(); |
| destination()->Split(zero); |
| return; |
| } |
| default: |
| UNREACHABLE(); |
| } |
| Load(left); |
| Load(right); |
| Comparison(cc, strict, destination()); |
| } |
| |
| |
| void CodeGenerator::VisitThisFunction(ThisFunction* node) { |
| frame_->PushFunction(); |
| } |
| |
| |
| void CodeGenerator::GenerateArgumentsAccess(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| |
| // ArgumentsAccessStub expects the key in rdx and the formal |
| // parameter count in rax. |
| Load(args->at(0)); |
| Result key = frame_->Pop(); |
| // Explicitly create a constant result. |
| Result count(Handle<Smi>(Smi::FromInt(scope_->num_parameters()))); |
| // Call the shared stub to get to arguments[key]. |
| ArgumentsAccessStub stub(ArgumentsAccessStub::READ_ELEMENT); |
| Result result = frame_->CallStub(&stub, &key, &count); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::GenerateIsArray(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| Load(args->at(0)); |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| ASSERT(value.is_valid()); |
| Condition is_smi = masm_->CheckSmi(value.reg()); |
| destination()->false_target()->Branch(is_smi); |
| // It is a heap object - get map. |
| // Check if the object is a JS array or not. |
| __ CmpObjectType(value.reg(), JS_ARRAY_TYPE, kScratchRegister); |
| value.Unuse(); |
| destination()->Split(equal); |
| } |
| |
| |
| void CodeGenerator::GenerateIsConstructCall(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 0); |
| |
| // Get the frame pointer for the calling frame. |
| Result fp = allocator()->Allocate(); |
| __ movq(fp.reg(), Operand(rbp, StandardFrameConstants::kCallerFPOffset)); |
| |
| // Skip the arguments adaptor frame if it exists. |
| Label check_frame_marker; |
| __ cmpq(Operand(fp.reg(), StandardFrameConstants::kContextOffset), |
| Immediate(Smi::FromInt(StackFrame::ARGUMENTS_ADAPTOR))); |
| __ j(not_equal, &check_frame_marker); |
| __ movq(fp.reg(), Operand(fp.reg(), StandardFrameConstants::kCallerFPOffset)); |
| |
| // Check the marker in the calling frame. |
| __ bind(&check_frame_marker); |
| __ cmpq(Operand(fp.reg(), StandardFrameConstants::kMarkerOffset), |
| Immediate(Smi::FromInt(StackFrame::CONSTRUCT))); |
| fp.Unuse(); |
| destination()->Split(equal); |
| } |
| |
| |
| void CodeGenerator::GenerateArgumentsLength(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 0); |
| // ArgumentsAccessStub takes the parameter count as an input argument |
| // in register eax. Create a constant result for it. |
| Result count(Handle<Smi>(Smi::FromInt(scope_->num_parameters()))); |
| // Call the shared stub to get to the arguments.length. |
| ArgumentsAccessStub stub(ArgumentsAccessStub::READ_LENGTH); |
| Result result = frame_->CallStub(&stub, &count); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::GenerateFastCharCodeAt(ZoneList<Expression*>* args) { |
| Comment(masm_, "[ GenerateFastCharCodeAt"); |
| ASSERT(args->length() == 2); |
| |
| Label slow_case; |
| Label end; |
| Label not_a_flat_string; |
| Label a_cons_string; |
| Label try_again_with_new_string; |
| Label ascii_string; |
| Label got_char_code; |
| |
| Load(args->at(0)); |
| Load(args->at(1)); |
| Result index = frame_->Pop(); |
| Result object = frame_->Pop(); |
| |
| // Get register rcx to use as shift amount later. |
| Result shift_amount; |
| if (object.is_register() && object.reg().is(rcx)) { |
| Result fresh = allocator_->Allocate(); |
| shift_amount = object; |
| object = fresh; |
| __ movq(object.reg(), rcx); |
| } |
| if (index.is_register() && index.reg().is(rcx)) { |
| Result fresh = allocator_->Allocate(); |
| shift_amount = index; |
| index = fresh; |
| __ movq(index.reg(), rcx); |
| } |
| // There could be references to ecx in the frame. Allocating will |
| // spill them, otherwise spill explicitly. |
| if (shift_amount.is_valid()) { |
| frame_->Spill(rcx); |
| } else { |
| shift_amount = allocator()->Allocate(rcx); |
| } |
| ASSERT(shift_amount.is_register()); |
| ASSERT(shift_amount.reg().is(rcx)); |
| ASSERT(allocator_->count(rcx) == 1); |
| |
| // We will mutate the index register and possibly the object register. |
| // The case where they are somehow the same register is handled |
| // because we only mutate them in the case where the receiver is a |
| // heap object and the index is not. |
| object.ToRegister(); |
| index.ToRegister(); |
| frame_->Spill(object.reg()); |
| frame_->Spill(index.reg()); |
| |
| // We need a single extra temporary register. |
| Result temp = allocator()->Allocate(); |
| ASSERT(temp.is_valid()); |
| |
| // There is no virtual frame effect from here up to the final result |
| // push. |
| |
| // If the receiver is a smi trigger the slow case. |
| __ JumpIfSmi(object.reg(), &slow_case); |
| |
| // If the index is negative or non-smi trigger the slow case. |
| __ JumpIfNotPositiveSmi(index.reg(), &slow_case); |
| |
| // Untag the index. |
| __ SmiToInteger32(index.reg(), index.reg()); |
| |
| __ bind(&try_again_with_new_string); |
| // Fetch the instance type of the receiver into rcx. |
| __ movq(rcx, FieldOperand(object.reg(), HeapObject::kMapOffset)); |
| __ movzxbl(rcx, FieldOperand(rcx, Map::kInstanceTypeOffset)); |
| // If the receiver is not a string trigger the slow case. |
| __ testb(rcx, Immediate(kIsNotStringMask)); |
| __ j(not_zero, &slow_case); |
| |
| // Here we make assumptions about the tag values and the shifts needed. |
| // See the comment in objects.h. |
| ASSERT(kLongStringTag == 0); |
| ASSERT(kMediumStringTag + String::kLongLengthShift == |
| String::kMediumLengthShift); |
| ASSERT(kShortStringTag + String::kLongLengthShift == |
| String::kShortLengthShift); |
| __ and_(rcx, Immediate(kStringSizeMask)); |
| __ addq(rcx, Immediate(String::kLongLengthShift)); |
| // Fetch the length field into the temporary register. |
| __ movl(temp.reg(), FieldOperand(object.reg(), String::kLengthOffset)); |
| __ shrl(temp.reg()); // The shift amount in ecx is implicit operand. |
| // Check for index out of range. |
| __ cmpl(index.reg(), temp.reg()); |
| __ j(greater_equal, &slow_case); |
| // Reload the instance type (into the temp register this time).. |
| __ movq(temp.reg(), FieldOperand(object.reg(), HeapObject::kMapOffset)); |
| __ movzxbl(temp.reg(), FieldOperand(temp.reg(), Map::kInstanceTypeOffset)); |
| |
| // We need special handling for non-flat strings. |
| ASSERT(kSeqStringTag == 0); |
| __ testb(temp.reg(), Immediate(kStringRepresentationMask)); |
| __ j(not_zero, ¬_a_flat_string); |
| // Check for 1-byte or 2-byte string. |
| __ testb(temp.reg(), Immediate(kStringEncodingMask)); |
| __ j(not_zero, &ascii_string); |
| |
| // 2-byte string. |
| // Load the 2-byte character code into the temp register. |
| __ movzxwl(temp.reg(), FieldOperand(object.reg(), |
| index.reg(), |
| times_2, |
| SeqTwoByteString::kHeaderSize)); |
| __ jmp(&got_char_code); |
| |
| // ASCII string. |
| __ bind(&ascii_string); |
| // Load the byte into the temp register. |
| __ movzxbl(temp.reg(), FieldOperand(object.reg(), |
| index.reg(), |
| times_1, |
| SeqAsciiString::kHeaderSize)); |
| __ bind(&got_char_code); |
| __ Integer32ToSmi(temp.reg(), temp.reg()); |
| __ jmp(&end); |
| |
| // Handle non-flat strings. |
| __ bind(¬_a_flat_string); |
| __ and_(temp.reg(), Immediate(kStringRepresentationMask)); |
| __ cmpb(temp.reg(), Immediate(kConsStringTag)); |
| __ j(equal, &a_cons_string); |
| __ cmpb(temp.reg(), Immediate(kSlicedStringTag)); |
| __ j(not_equal, &slow_case); |
| |
| // SlicedString. |
| // Add the offset to the index and trigger the slow case on overflow. |
| __ addl(index.reg(), FieldOperand(object.reg(), SlicedString::kStartOffset)); |
| __ j(overflow, &slow_case); |
| // Getting the underlying string is done by running the cons string code. |
| |
| // ConsString. |
| __ bind(&a_cons_string); |
| // Get the first of the two strings. Both sliced and cons strings |
| // store their source string at the same offset. |
| ASSERT(SlicedString::kBufferOffset == ConsString::kFirstOffset); |
| __ movq(object.reg(), FieldOperand(object.reg(), ConsString::kFirstOffset)); |
| __ jmp(&try_again_with_new_string); |
| |
| __ bind(&slow_case); |
| // Move the undefined value into the result register, which will |
| // trigger the slow case. |
| __ LoadRoot(temp.reg(), Heap::kUndefinedValueRootIndex); |
| |
| __ bind(&end); |
| frame_->Push(&temp); |
| } |
| |
| |
| void CodeGenerator::GenerateIsNonNegativeSmi(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| Load(args->at(0)); |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| ASSERT(value.is_valid()); |
| Condition positive_smi = masm_->CheckPositiveSmi(value.reg()); |
| value.Unuse(); |
| destination()->Split(positive_smi); |
| } |
| |
| |
| void CodeGenerator::GenerateIsSmi(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| Load(args->at(0)); |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| ASSERT(value.is_valid()); |
| Condition is_smi = masm_->CheckSmi(value.reg()); |
| value.Unuse(); |
| destination()->Split(is_smi); |
| } |
| |
| |
| void CodeGenerator::GenerateLog(ZoneList<Expression*>* args) { |
| // Conditionally generate a log call. |
| // Args: |
| // 0 (literal string): The type of logging (corresponds to the flags). |
| // This is used to determine whether or not to generate the log call. |
| // 1 (string): Format string. Access the string at argument index 2 |
| // with '%2s' (see Logger::LogRuntime for all the formats). |
| // 2 (array): Arguments to the format string. |
| ASSERT_EQ(args->length(), 3); |
| #ifdef ENABLE_LOGGING_AND_PROFILING |
| if (ShouldGenerateLog(args->at(0))) { |
| Load(args->at(1)); |
| Load(args->at(2)); |
| frame_->CallRuntime(Runtime::kLog, 2); |
| } |
| #endif |
| // Finally, we're expected to leave a value on the top of the stack. |
| frame_->Push(Factory::undefined_value()); |
| } |
| |
| |
| void CodeGenerator::GenerateObjectEquals(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 2); |
| |
| // Load the two objects into registers and perform the comparison. |
| Load(args->at(0)); |
| Load(args->at(1)); |
| Result right = frame_->Pop(); |
| Result left = frame_->Pop(); |
| right.ToRegister(); |
| left.ToRegister(); |
| __ cmpq(right.reg(), left.reg()); |
| right.Unuse(); |
| left.Unuse(); |
| destination()->Split(equal); |
| } |
| |
| |
| void CodeGenerator::GenerateGetFramePointer(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 0); |
| // RBP value is aligned, so it should be tagged as a smi (without necesarily |
| // being padded as a smi). |
| ASSERT(kSmiTag == 0 && kSmiTagSize == 1); |
| Result rbp_as_smi = allocator_->Allocate(); |
| ASSERT(rbp_as_smi.is_valid()); |
| __ movq(rbp_as_smi.reg(), rbp); |
| frame_->Push(&rbp_as_smi); |
| } |
| |
| |
| void CodeGenerator::GenerateRandomPositiveSmi(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 0); |
| frame_->SpillAll(); |
| __ push(rsi); |
| |
| // Make sure the frame is aligned like the OS expects. |
| static const int kFrameAlignment = OS::ActivationFrameAlignment(); |
| if (kFrameAlignment > 0) { |
| ASSERT(IsPowerOf2(kFrameAlignment)); |
| __ movq(rbx, rsp); // Save in AMD-64 abi callee-saved register. |
| __ and_(rsp, Immediate(-kFrameAlignment)); |
| } |
| |
| // Call V8::RandomPositiveSmi(). |
| __ Call(FUNCTION_ADDR(V8::RandomPositiveSmi), RelocInfo::RUNTIME_ENTRY); |
| |
| // Restore stack pointer from callee-saved register. |
| if (kFrameAlignment > 0) { |
| __ movq(rsp, rbx); |
| } |
| |
| __ pop(rsi); |
| Result result = allocator_->Allocate(rax); |
| frame_->Push(&result); |
| } |
| |
| |
| void CodeGenerator::GenerateFastMathOp(MathOp op, ZoneList<Expression*>* args) { |
| JumpTarget done; |
| JumpTarget call_runtime; |
| ASSERT(args->length() == 1); |
| |
| // Load number and duplicate it. |
| Load(args->at(0)); |
| frame_->Dup(); |
| |
| // Get the number into an unaliased register and load it onto the |
| // floating point stack still leaving one copy on the frame. |
| Result number = frame_->Pop(); |
| number.ToRegister(); |
| frame_->Spill(number.reg()); |
| FloatingPointHelper::LoadFloatOperand(masm_, number.reg()); |
| number.Unuse(); |
| |
| // Perform the operation on the number. |
| switch (op) { |
| case SIN: |
| __ fsin(); |
| break; |
| case COS: |
| __ fcos(); |
| break; |
| } |
| |
| // Go slow case if argument to operation is out of range. |
| Result eax_reg = allocator()->Allocate(rax); |
| ASSERT(eax_reg.is_valid()); |
| __ fnstsw_ax(); |
| __ testl(rax, Immediate(0x0400)); // Bit 10 is condition flag C2. |
| eax_reg.Unuse(); |
| call_runtime.Branch(not_zero); |
| |
| // Allocate heap number for result if possible. |
| Result scratch = allocator()->Allocate(); |
| Result heap_number = allocator()->Allocate(); |
| FloatingPointHelper::AllocateHeapNumber(masm_, |
| call_runtime.entry_label(), |
| scratch.reg(), |
| heap_number.reg()); |
| scratch.Unuse(); |
| |
| // Store the result in the allocated heap number. |
| __ fstp_d(FieldOperand(heap_number.reg(), HeapNumber::kValueOffset)); |
| // Replace the extra copy of the argument with the result. |
| frame_->SetElementAt(0, &heap_number); |
| done.Jump(); |
| |
| call_runtime.Bind(); |
| // Free ST(0) which was not popped before calling into the runtime. |
| __ ffree(0); |
| Result answer; |
| switch (op) { |
| case SIN: |
| answer = frame_->CallRuntime(Runtime::kMath_sin, 1); |
| break; |
| case COS: |
| answer = frame_->CallRuntime(Runtime::kMath_cos, 1); |
| break; |
| } |
| frame_->Push(&answer); |
| done.Bind(); |
| } |
| |
| |
| void CodeGenerator::GenerateClassOf(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| JumpTarget leave, null, function, non_function_constructor; |
| Load(args->at(0)); // Load the object. |
| Result obj = frame_->Pop(); |
| obj.ToRegister(); |
| frame_->Spill(obj.reg()); |
| |
| // If the object is a smi, we return null. |
| Condition is_smi = masm_->CheckSmi(obj.reg()); |
| null.Branch(is_smi); |
| |
| // Check that the object is a JS object but take special care of JS |
| // functions to make sure they have 'Function' as their class. |
| |
| __ CmpObjectType(obj.reg(), FIRST_JS_OBJECT_TYPE, obj.reg()); |
| null.Branch(below); |
| |
| // As long as JS_FUNCTION_TYPE is the last instance type and it is |
| // right after LAST_JS_OBJECT_TYPE, we can avoid checking for |
| // LAST_JS_OBJECT_TYPE. |
| ASSERT(LAST_TYPE == JS_FUNCTION_TYPE); |
| ASSERT(JS_FUNCTION_TYPE == LAST_JS_OBJECT_TYPE + 1); |
| __ CmpInstanceType(obj.reg(), JS_FUNCTION_TYPE); |
| function.Branch(equal); |
| |
| // Check if the constructor in the map is a function. |
| __ movq(obj.reg(), FieldOperand(obj.reg(), Map::kConstructorOffset)); |
| __ CmpObjectType(obj.reg(), JS_FUNCTION_TYPE, kScratchRegister); |
| non_function_constructor.Branch(not_equal); |
| |
| // The obj register now contains the constructor function. Grab the |
| // instance class name from there. |
| __ movq(obj.reg(), |
| FieldOperand(obj.reg(), JSFunction::kSharedFunctionInfoOffset)); |
| __ movq(obj.reg(), |
| FieldOperand(obj.reg(), |
| SharedFunctionInfo::kInstanceClassNameOffset)); |
| frame_->Push(&obj); |
| leave.Jump(); |
| |
| // Functions have class 'Function'. |
| function.Bind(); |
| frame_->Push(Factory::function_class_symbol()); |
| leave.Jump(); |
| |
| // Objects with a non-function constructor have class 'Object'. |
| non_function_constructor.Bind(); |
| frame_->Push(Factory::Object_symbol()); |
| leave.Jump(); |
| |
| // Non-JS objects have class null. |
| null.Bind(); |
| frame_->Push(Factory::null_value()); |
| |
| // All done. |
| leave.Bind(); |
| } |
| |
| |
| void CodeGenerator::GenerateSetValueOf(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 2); |
| JumpTarget leave; |
| Load(args->at(0)); // Load the object. |
| Load(args->at(1)); // Load the value. |
| Result value = frame_->Pop(); |
| Result object = frame_->Pop(); |
| value.ToRegister(); |
| object.ToRegister(); |
| |
| // if (object->IsSmi()) return value. |
| Condition is_smi = masm_->CheckSmi(object.reg()); |
| leave.Branch(is_smi, &value); |
| |
| // It is a heap object - get its map. |
| Result scratch = allocator_->Allocate(); |
| ASSERT(scratch.is_valid()); |
| // if (!object->IsJSValue()) return value. |
| __ CmpObjectType(object.reg(), JS_VALUE_TYPE, scratch.reg()); |
| leave.Branch(not_equal, &value); |
| |
| // Store the value. |
| __ movq(FieldOperand(object.reg(), JSValue::kValueOffset), value.reg()); |
| // Update the write barrier. Save the value as it will be |
| // overwritten by the write barrier code and is needed afterward. |
| Result duplicate_value = allocator_->Allocate(); |
| ASSERT(duplicate_value.is_valid()); |
| __ movq(duplicate_value.reg(), value.reg()); |
| // The object register is also overwritten by the write barrier and |
| // possibly aliased in the frame. |
| frame_->Spill(object.reg()); |
| __ RecordWrite(object.reg(), JSValue::kValueOffset, duplicate_value.reg(), |
| scratch.reg()); |
| object.Unuse(); |
| scratch.Unuse(); |
| duplicate_value.Unuse(); |
| |
| // Leave. |
| leave.Bind(&value); |
| frame_->Push(&value); |
| } |
| |
| |
| void CodeGenerator::GenerateValueOf(ZoneList<Expression*>* args) { |
| ASSERT(args->length() == 1); |
| JumpTarget leave; |
| Load(args->at(0)); // Load the object. |
| frame_->Dup(); |
| Result object = frame_->Pop(); |
| object.ToRegister(); |
| ASSERT(object.is_valid()); |
| // if (object->IsSmi()) return object. |
| Condition is_smi = masm_->CheckSmi(object.reg()); |
| leave.Branch(is_smi); |
| // It is a heap object - get map. |
| Result temp = allocator()->Allocate(); |
| ASSERT(temp.is_valid()); |
| // if (!object->IsJSValue()) return object. |
| __ CmpObjectType(object.reg(), JS_VALUE_TYPE, temp.reg()); |
| leave.Branch(not_equal); |
| __ movq(temp.reg(), FieldOperand(object.reg(), JSValue::kValueOffset)); |
| object.Unuse(); |
| frame_->SetElementAt(0, &temp); |
| leave.Bind(); |
| } |
| |
| |
| // ----------------------------------------------------------------------------- |
| // CodeGenerator implementation of Expressions |
| |
| void CodeGenerator::LoadAndSpill(Expression* expression, |
| TypeofState typeof_state) { |
| // TODO(x64): No architecture specific code. Move to shared location. |
| ASSERT(in_spilled_code()); |
| set_in_spilled_code(false); |
| Load(expression, typeof_state); |
| frame_->SpillAll(); |
| set_in_spilled_code(true); |
| } |
| |
| |
| void CodeGenerator::Load(Expression* x, TypeofState typeof_state) { |
| #ifdef DEBUG |
| int original_height = frame_->height(); |
| #endif |
| ASSERT(!in_spilled_code()); |
| JumpTarget true_target; |
| JumpTarget false_target; |
| ControlDestination dest(&true_target, &false_target, true); |
| LoadCondition(x, typeof_state, &dest, false); |
| |
| if (dest.false_was_fall_through()) { |
| // The false target was just bound. |
| JumpTarget loaded; |
| frame_->Push(Factory::false_value()); |
| // There may be dangling jumps to the true target. |
| if (true_target.is_linked()) { |
| loaded.Jump(); |
| true_target.Bind(); |
| frame_->Push(Factory::true_value()); |
| loaded.Bind(); |
| } |
| |
| } else if (dest.is_used()) { |
| // There is true, and possibly false, control flow (with true as |
| // the fall through). |
| JumpTarget loaded; |
| frame_->Push(Factory::true_value()); |
| if (false_target.is_linked()) { |
| loaded.Jump(); |
| false_target.Bind(); |
| frame_->Push(Factory::false_value()); |
| loaded.Bind(); |
| } |
| |
| } else { |
| // We have a valid value on top of the frame, but we still may |
| // have dangling jumps to the true and false targets from nested |
| // subexpressions (eg, the left subexpressions of the |
| // short-circuited boolean operators). |
| ASSERT(has_valid_frame()); |
| if (true_target.is_linked() || false_target.is_linked()) { |
| JumpTarget loaded; |
| loaded.Jump(); // Don't lose the current TOS. |
| if (true_target.is_linked()) { |
| true_target.Bind(); |
| frame_->Push(Factory::true_value()); |
| if (false_target.is_linked()) { |
| loaded.Jump(); |
| } |
| } |
| if (false_target.is_linked()) { |
| false_target.Bind(); |
| frame_->Push(Factory::false_value()); |
| } |
| loaded.Bind(); |
| } |
| } |
| |
| ASSERT(has_valid_frame()); |
| ASSERT(frame_->height() == original_height + 1); |
| } |
| |
| |
| // Emit code to load the value of an expression to the top of the |
| // frame. If the expression is boolean-valued it may be compiled (or |
| // partially compiled) into control flow to the control destination. |
| // If force_control is true, control flow is forced. |
| void CodeGenerator::LoadCondition(Expression* x, |
| TypeofState typeof_state, |
| ControlDestination* dest, |
| bool force_control) { |
| ASSERT(!in_spilled_code()); |
| int original_height = frame_->height(); |
| |
| { CodeGenState new_state(this, typeof_state, dest); |
| Visit(x); |
| |
| // If we hit a stack overflow, we may not have actually visited |
| // the expression. In that case, we ensure that we have a |
| // valid-looking frame state because we will continue to generate |
| // code as we unwind the C++ stack. |
| // |
| // It's possible to have both a stack overflow and a valid frame |
| // state (eg, a subexpression overflowed, visiting it returned |
| // with a dummied frame state, and visiting this expression |
| // returned with a normal-looking state). |
| if (HasStackOverflow() && |
| !dest->is_used() && |
| frame_->height() == original_height) { |
| dest->Goto(true); |
| } |
| } |
| |
| if (force_control && !dest->is_used()) { |
| // Convert the TOS value into flow to the control destination. |
| // TODO(X64): Make control flow to control destinations work. |
| ToBoolean(dest); |
| } |
| |
| ASSERT(!(force_control && !dest->is_used())); |
| ASSERT(dest->is_used() || frame_->height() == original_height + 1); |
| } |
| |
| |
| class ToBooleanStub: public CodeStub { |
| public: |
| ToBooleanStub() { } |
| |
| void Generate(MacroAssembler* masm); |
| |
| private: |
| Major MajorKey() { return ToBoolean; } |
| int MinorKey() { return 0; } |
| }; |
| |
| |
| // ECMA-262, section 9.2, page 30: ToBoolean(). Pop the top of stack and |
| // convert it to a boolean in the condition code register or jump to |
| // 'false_target'/'true_target' as appropriate. |
| void CodeGenerator::ToBoolean(ControlDestination* dest) { |
| Comment cmnt(masm_, "[ ToBoolean"); |
| |
| // The value to convert should be popped from the frame. |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| // Fast case checks. |
| |
| // 'false' => false. |
| __ CompareRoot(value.reg(), Heap::kFalseValueRootIndex); |
| dest->false_target()->Branch(equal); |
| |
| // 'true' => true. |
| __ CompareRoot(value.reg(), Heap::kTrueValueRootIndex); |
| dest->true_target()->Branch(equal); |
| |
| // 'undefined' => false. |
| __ CompareRoot(value.reg(), Heap::kUndefinedValueRootIndex); |
| dest->false_target()->Branch(equal); |
| |
| // Smi => false iff zero. |
| Condition equals = masm_->CheckSmiEqualsConstant(value.reg(), 0); |
| dest->false_target()->Branch(equals); |
| Condition is_smi = masm_->CheckSmi(value.reg()); |
| dest->true_target()->Branch(is_smi); |
| |
| // Call the stub for all other cases. |
| frame_->Push(&value); // Undo the Pop() from above. |
| ToBooleanStub stub; |
| Result temp = frame_->CallStub(&stub, 1); |
| // Convert the result to a condition code. |
| __ testq(temp.reg(), temp.reg()); |
| temp.Unuse(); |
| dest->Split(not_equal); |
| } |
| |
| |
| void CodeGenerator::LoadUnsafeSmi(Register target, Handle<Object> value) { |
| UNIMPLEMENTED(); |
| // TODO(X64): Implement security policy for loads of smis. |
| } |
| |
| |
| bool CodeGenerator::IsUnsafeSmi(Handle<Object> value) { |
| return false; |
| } |
| |
| //------------------------------------------------------------------------------ |
| // CodeGenerator implementation of variables, lookups, and stores. |
| |
| Reference::Reference(CodeGenerator* cgen, Expression* expression) |
| : cgen_(cgen), expression_(expression), type_(ILLEGAL) { |
| cgen->LoadReference(this); |
| } |
| |
| |
| Reference::~Reference() { |
| cgen_->UnloadReference(this); |
| } |
| |
| |
| void CodeGenerator::LoadReference(Reference* ref) { |
| // References are loaded from both spilled and unspilled code. Set the |
| // state to unspilled to allow that (and explicitly spill after |
| // construction at the construction sites). |
| bool was_in_spilled_code = in_spilled_code_; |
| in_spilled_code_ = false; |
| |
| Comment cmnt(masm_, "[ LoadReference"); |
| Expression* e = ref->expression(); |
| Property* property = e->AsProperty(); |
| Variable* var = e->AsVariableProxy()->AsVariable(); |
| |
| if (property != NULL) { |
| // The expression is either a property or a variable proxy that rewrites |
| // to a property. |
| Load(property->obj()); |
| // We use a named reference if the key is a literal symbol, unless it is |
| // a string that can be legally parsed as an integer. This is because |
| // otherwise we will not get into the slow case code that handles [] on |
| // String objects. |
| Literal* literal = property->key()->AsLiteral(); |
| uint32_t dummy; |
| if (literal != NULL && |
| literal->handle()->IsSymbol() && |
| !String::cast(*(literal->handle()))->AsArrayIndex(&dummy)) { |
| ref->set_type(Reference::NAMED); |
| } else { |
| Load(property->key()); |
| ref->set_type(Reference::KEYED); |
| } |
| } else if (var != NULL) { |
| // The expression is a variable proxy that does not rewrite to a |
| // property. Global variables are treated as named property references. |
| if (var->is_global()) { |
| LoadGlobal(); |
| ref->set_type(Reference::NAMED); |
| } else { |
| ASSERT(var->slot() != NULL); |
| ref->set_type(Reference::SLOT); |
| } |
| } else { |
| // Anything else is a runtime error. |
| Load(e); |
| frame_->CallRuntime(Runtime::kThrowReferenceError, 1); |
| } |
| |
| in_spilled_code_ = was_in_spilled_code; |
| } |
| |
| |
| void CodeGenerator::UnloadReference(Reference* ref) { |
| // Pop a reference from the stack while preserving TOS. |
| Comment cmnt(masm_, "[ UnloadReference"); |
| frame_->Nip(ref->size()); |
| } |
| |
| |
| Operand CodeGenerator::SlotOperand(Slot* slot, Register tmp) { |
| // Currently, this assertion will fail if we try to assign to |
| // a constant variable that is constant because it is read-only |
| // (such as the variable referring to a named function expression). |
| // We need to implement assignments to read-only variables. |
| // Ideally, we should do this during AST generation (by converting |
| // such assignments into expression statements); however, in general |
| // we may not be able to make the decision until past AST generation, |
| // that is when the entire program is known. |
| ASSERT(slot != NULL); |
| int index = slot->index(); |
| switch (slot->type()) { |
| case Slot::PARAMETER: |
| return frame_->ParameterAt(index); |
| |
| case Slot::LOCAL: |
| return frame_->LocalAt(index); |
| |
| case Slot::CONTEXT: { |
| // Follow the context chain if necessary. |
| ASSERT(!tmp.is(rsi)); // do not overwrite context register |
| Register context = rsi; |
| int chain_length = scope()->ContextChainLength(slot->var()->scope()); |
| for (int i = 0; i < chain_length; i++) { |
| // Load the closure. |
| // (All contexts, even 'with' contexts, have a closure, |
| // and it is the same for all contexts inside a function. |
| // There is no need to go to the function context first.) |
| __ movq(tmp, ContextOperand(context, Context::CLOSURE_INDEX)); |
| // Load the function context (which is the incoming, outer context). |
| __ movq(tmp, FieldOperand(tmp, JSFunction::kContextOffset)); |
| context = tmp; |
| } |
| // We may have a 'with' context now. Get the function context. |
| // (In fact this mov may never be the needed, since the scope analysis |
| // may not permit a direct context access in this case and thus we are |
| // always at a function context. However it is safe to dereference be- |
| // cause the function context of a function context is itself. Before |
| // deleting this mov we should try to create a counter-example first, |
| // though...) |
| __ movq(tmp, ContextOperand(context, Context::FCONTEXT_INDEX)); |
| return ContextOperand(tmp, index); |
| } |
| |
| default: |
| UNREACHABLE(); |
| return Operand(rsp, 0); |
| } |
| } |
| |
| |
| Operand CodeGenerator::ContextSlotOperandCheckExtensions(Slot* slot, |
| Result tmp, |
| JumpTarget* slow) { |
| ASSERT(slot->type() == Slot::CONTEXT); |
| ASSERT(tmp.is_register()); |
| Register context = rsi; |
| |
| for (Scope* s = scope(); s != slot->var()->scope(); s = s->outer_scope()) { |
| if (s->num_heap_slots() > 0) { |
| if (s->calls_eval()) { |
| // Check that extension is NULL. |
| __ cmpq(ContextOperand(context, Context::EXTENSION_INDEX), |
| Immediate(0)); |
| slow->Branch(not_equal, not_taken); |
| } |
| __ movq(tmp.reg(), ContextOperand(context, Context::CLOSURE_INDEX)); |
| __ movq(tmp.reg(), FieldOperand(tmp.reg(), JSFunction::kContextOffset)); |
| context = tmp.reg(); |
| } |
| } |
| // Check that last extension is NULL. |
| __ cmpq(ContextOperand(context, Context::EXTENSION_INDEX), Immediate(0)); |
| slow->Branch(not_equal, not_taken); |
| __ movq(tmp.reg(), ContextOperand(context, Context::FCONTEXT_INDEX)); |
| return ContextOperand(tmp.reg(), slot->index()); |
| } |
| |
| |
| void CodeGenerator::LoadFromSlot(Slot* slot, TypeofState typeof_state) { |
| if (slot->type() == Slot::LOOKUP) { |
| ASSERT(slot->var()->is_dynamic()); |
| |
| JumpTarget slow; |
| JumpTarget done; |
| Result value; |
| |
| // Generate fast-case code for variables that might be shadowed by |
| // eval-introduced variables. Eval is used a lot without |
| // introducing variables. In those cases, we do not want to |
| // perform a runtime call for all variables in the scope |
| // containing the eval. |
| if (slot->var()->mode() == Variable::DYNAMIC_GLOBAL) { |
| value = LoadFromGlobalSlotCheckExtensions(slot, typeof_state, &slow); |
| // If there was no control flow to slow, we can exit early. |
| if (!slow.is_linked()) { |
| frame_->Push(&value); |
| return; |
| } |
| |
| done.Jump(&value); |
| |
| } else if (slot->var()->mode() == Variable::DYNAMIC_LOCAL) { |
| Slot* potential_slot = slot->var()->local_if_not_shadowed()->slot(); |
| // Only generate the fast case for locals that rewrite to slots. |
| // This rules out argument loads. |
| if (potential_slot != NULL) { |
| // Allocate a fresh register to use as a temp in |
| // ContextSlotOperandCheckExtensions and to hold the result |
| // value. |
| value = allocator_->Allocate(); |
| ASSERT(value.is_valid()); |
| __ movq(value.reg(), |
| ContextSlotOperandCheckExtensions(potential_slot, |
| value, |
| &slow)); |
| if (potential_slot->var()->mode() == Variable::CONST) { |
| __ CompareRoot(value.reg(), Heap::kTheHoleValueRootIndex); |
| done.Branch(not_equal, &value); |
| __ LoadRoot(value.reg(), Heap::kUndefinedValueRootIndex); |
| } |
| // There is always control flow to slow from |
| // ContextSlotOperandCheckExtensions so we have to jump around |
| // it. |
| done.Jump(&value); |
| } |
| } |
| |
| slow.Bind(); |
| // A runtime call is inevitable. We eagerly sync frame elements |
| // to memory so that we can push the arguments directly into place |
| // on top of the frame. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| frame_->EmitPush(rsi); |
| __ movq(kScratchRegister, slot->var()->name(), RelocInfo::EMBEDDED_OBJECT); |
| frame_->EmitPush(kScratchRegister); |
| if (typeof_state == INSIDE_TYPEOF) { |
| value = |
| frame_->CallRuntime(Runtime::kLoadContextSlotNoReferenceError, 2); |
| } else { |
| value = frame_->CallRuntime(Runtime::kLoadContextSlot, 2); |
| } |
| |
| done.Bind(&value); |
| frame_->Push(&value); |
| |
| } else if (slot->var()->mode() == Variable::CONST) { |
| // Const slots may contain 'the hole' value (the constant hasn't been |
| // initialized yet) which needs to be converted into the 'undefined' |
| // value. |
| // |
| // We currently spill the virtual frame because constants use the |
| // potentially unsafe direct-frame access of SlotOperand. |
| VirtualFrame::SpilledScope spilled_scope; |
| Comment cmnt(masm_, "[ Load const"); |
| JumpTarget exit; |
| __ movq(rcx, SlotOperand(slot, rcx)); |
| __ CompareRoot(rcx, Heap::kTheHoleValueRootIndex); |
| exit.Branch(not_equal); |
| __ LoadRoot(rcx, Heap::kUndefinedValueRootIndex); |
| exit.Bind(); |
| frame_->EmitPush(rcx); |
| |
| } else if (slot->type() == Slot::PARAMETER) { |
| frame_->PushParameterAt(slot->index()); |
| |
| } else if (slot->type() == Slot::LOCAL) { |
| frame_->PushLocalAt(slot->index()); |
| |
| } else { |
| // The other remaining slot types (LOOKUP and GLOBAL) cannot reach |
| // here. |
| // |
| // The use of SlotOperand below is safe for an unspilled frame |
| // because it will always be a context slot. |
| ASSERT(slot->type() == Slot::CONTEXT); |
| Result temp = allocator_->Allocate(); |
| ASSERT(temp.is_valid()); |
| __ movq(temp.reg(), SlotOperand(slot, temp.reg())); |
| frame_->Push(&temp); |
| } |
| } |
| |
| |
| void CodeGenerator::LoadFromSlotCheckForArguments(Slot* slot, |
| TypeofState state) { |
| LoadFromSlot(slot, state); |
| |
| // Bail out quickly if we're not using lazy arguments allocation. |
| if (ArgumentsMode() != LAZY_ARGUMENTS_ALLOCATION) return; |
| |
| // ... or if the slot isn't a non-parameter arguments slot. |
| if (slot->type() == Slot::PARAMETER || !slot->is_arguments()) return; |
| |
| // Pop the loaded value from the stack. |
| Result value = frame_->Pop(); |
| |
| // If the loaded value is a constant, we know if the arguments |
| // object has been lazily loaded yet. |
| if (value.is_constant()) { |
| if (value.handle()->IsTheHole()) { |
| Result arguments = StoreArgumentsObject(false); |
| frame_->Push(&arguments); |
| } else { |
| frame_->Push(&value); |
| } |
| return; |
| } |
| |
| // The loaded value is in a register. If it is the sentinel that |
| // indicates that we haven't loaded the arguments object yet, we |
| // need to do it now. |
| JumpTarget exit; |
| __ CompareRoot(value.reg(), Heap::kTheHoleValueRootIndex); |
| frame_->Push(&value); |
| exit.Branch(not_equal); |
| Result arguments = StoreArgumentsObject(false); |
| frame_->SetElementAt(0, &arguments); |
| exit.Bind(); |
| } |
| |
| |
| void CodeGenerator::StoreToSlot(Slot* slot, InitState init_state) { |
| if (slot->type() == Slot::LOOKUP) { |
| ASSERT(slot->var()->is_dynamic()); |
| |
| // For now, just do a runtime call. Since the call is inevitable, |
| // we eagerly sync the virtual frame so we can directly push the |
| // arguments into place. |
| frame_->SyncRange(0, frame_->element_count() - 1); |
| |
| frame_->EmitPush(rsi); |
| frame_->EmitPush(slot->var()->name()); |
| |
| Result value; |
| if (init_state == CONST_INIT) { |
| // Same as the case for a normal store, but ignores attribute |
| // (e.g. READ_ONLY) of context slot so that we can initialize const |
| // properties (introduced via eval("const foo = (some expr);")). Also, |
| // uses the current function context instead of the top context. |
| // |
| // Note that we must declare the foo upon entry of eval(), via a |
| // context slot declaration, but we cannot initialize it at the same |
| // time, because the const declaration may be at the end of the eval |
| // code (sigh...) and the const variable may have been used before |
| // (where its value is 'undefined'). Thus, we can only do the |
| // initialization when we actually encounter the expression and when |
| // the expression operands are defined and valid, and thus we need the |
| // split into 2 operations: declaration of the context slot followed |
| // by initialization. |
| value = frame_->CallRuntime(Runtime::kInitializeConstContextSlot, 3); |
| } else { |
| value = frame_->CallRuntime(Runtime::kStoreContextSlot, 3); |
| } |
| // Storing a variable must keep the (new) value on the expression |
| // stack. This is necessary for compiling chained assignment |
| // expressions. |
| frame_->Push(&value); |
| } else { |
| ASSERT(!slot->var()->is_dynamic()); |
| |
| JumpTarget exit; |
| if (init_state == CONST_INIT) { |
| ASSERT(slot->var()->mode() == Variable::CONST); |
| // Only the first const initialization must be executed (the slot |
| // still contains 'the hole' value). When the assignment is executed, |
| // the code is identical to a normal store (see below). |
| // |
| // We spill the frame in the code below because the direct-frame |
| // access of SlotOperand is potentially unsafe with an unspilled |
| // frame. |
| VirtualFrame::SpilledScope spilled_scope; |
| Comment cmnt(masm_, "[ Init const"); |
| __ movq(rcx, SlotOperand(slot, rcx)); |
| __ CompareRoot(rcx, Heap::kTheHoleValueRootIndex); |
| exit.Branch(not_equal); |
| } |
| |
| // We must execute the store. Storing a variable must keep the (new) |
| // value on the stack. This is necessary for compiling assignment |
| // expressions. |
| // |
| // Note: We will reach here even with slot->var()->mode() == |
| // Variable::CONST because of const declarations which will initialize |
| // consts to 'the hole' value and by doing so, end up calling this code. |
| if (slot->type() == Slot::PARAMETER) { |
| frame_->StoreToParameterAt(slot->index()); |
| } else if (slot->type() == Slot::LOCAL) { |
| frame_->StoreToLocalAt(slot->index()); |
| } else { |
| // The other slot types (LOOKUP and GLOBAL) cannot reach here. |
| // |
| // The use of SlotOperand below is safe for an unspilled frame |
| // because the slot is a context slot. |
| ASSERT(slot->type() == Slot::CONTEXT); |
| frame_->Dup(); |
| Result value = frame_->Pop(); |
| value.ToRegister(); |
| Result start = allocator_->Allocate(); |
| ASSERT(start.is_valid()); |
| __ movq(SlotOperand(slot, start.reg()), value.reg()); |
| // RecordWrite may destroy the value registers. |
| // |
| // TODO(204): Avoid actually spilling when the value is not |
| // needed (probably the common case). |
| frame_->Spill(value.reg()); |
| int offset = FixedArray::kHeaderSize + slot->index() * kPointerSize; |
| Result temp = allocator_->Allocate(); |
| ASSERT(temp.is_valid()); |
| __ RecordWrite(start.reg(), offset, value.reg(), temp.reg()); |
| // The results start, value, and temp are unused by going out of |
| // scope. |
| } |
| |
| exit.Bind(); |
| } |
| } |
| |
| |
| Result CodeGenerator::LoadFromGlobalSlotCheckExtensions( |
| Slot* slot, |
| TypeofState typeof_state, |
| JumpTarget* slow) { |
| // Check that no extension objects have been created by calls to |
| // eval from the current scope to the global scope. |
| Register context = rsi; |
| Result tmp = allocator_->Allocate(); |
| ASSERT(tmp.is_valid()); // All non-reserved registers were available. |
| |
| Scope* s = scope(); |
| while (s != NULL) { |
| if (s->num_heap_slots() > 0) { |
| if (s->calls_eval()) { |
| // Check that extension is NULL. |
| __ cmpq(ContextOperand(context, Context::EXTENSION_INDEX), |
| Immediate(0)); |
| slow->Branch(not_equal, not_taken); |
| } |
| // Load next context in chain. |
| __ movq(tmp.reg(), ContextOperand(context, Context::CLOSURE_INDEX)); |
| __ movq(tmp.reg(), FieldOperand(tmp.reg(), JSFunction::kContextOffset)); |
| context = tmp.reg(); |
| } |
| // If no outer scope calls eval, we do not need to check more |
| // context extensions. If we have reached an eval scope, we check |
| // all extensions from this point. |
| if (!s->outer_scope_calls_eval() || s->is_eval_scope()) break; |
| s = s->outer_scope(); |
| } |
| |
| if (s->is_eval_scope()) { |
| // Loop up the context chain. There is no frame effect so it is |
| // safe to use raw labels here. |
| Label next, fast; |
| if (!context.is(tmp.reg())) { |
| __ movq(tmp.reg(), context); |
| } |
| // Load map for comparison into register, outside loop. |
| __ LoadRoot(kScratchRegister, Heap::kGlobalContextMapRootIndex); |
| __ bind(&next); |
| // Terminate at global context. |
| __ cmpq(kScratchRegister, FieldOperand(tmp.reg(), HeapObject::kMapOffset)); |
| __ j(equal, &fast); |
| // Check that extension is NULL. |
| __ cmpq(ContextOperand(tmp.reg(), Context::EXTENSION_INDEX), Immediate(0)); |
| slow->Branch(not_equal); |
| // Load next context in chain. |
| __ movq(tmp.reg(), ContextOperand(tmp.reg(), Context::CLOSURE_INDEX)); |
| __ movq(tmp.reg(), FieldOperand(tmp.reg(), JSFunction::kContextOffset)); |
| __ jmp(&next); |
| __ bind(&fast); |
| } |
| tmp.Unuse(); |
| |
| // All extension objects were empty and it is safe to use a global |
| // load IC call. |
| LoadGlobal(); |
| frame_->Push(slot->var()->name()); |
| RelocInfo::Mode mode = (typeof_state == INSIDE_TYPEOF) |
| ? RelocInfo::CODE_TARGET |
| : RelocInfo::CODE_TARGET_CONTEXT; |
| Result answer = frame_->CallLoadIC(mode); |
| // A test rax instruction following the call signals that the inobject |
| // property case was inlined. Ensure that there is not a test rax |
| // instruction here. |
| masm_->nop(); |
| // Discard the global object. The result is in answer. |
| frame_->Drop(); |
| return answer; |
| } |
| |
| |
| void CodeGenerator::LoadGlobal() { |
| if (in_spilled_code()) { |
| frame_->EmitPush(GlobalObject()); |
| } else { |
| Result temp = allocator_->Allocate(); |
| __ movq(temp.reg(), GlobalObject()); |
| frame_->Push(&temp); |
| } |
| } |
| |
| |
| void CodeGenerator::LoadGlobalReceiver() { |
| Result temp = allocator_->Allocate(); |
| Register reg = temp.reg(); |
| __ movq(reg, GlobalObject()); |
| __ movq(reg, FieldOperand(reg, GlobalObject::kGlobalReceiverOffset)); |
| frame_->Push(&temp); |
| } |
| |
| |
| ArgumentsAllocationMode CodeGenerator::ArgumentsMode() const { |
| if (scope_->arguments() == NULL) return NO_ARGUMENTS_ALLOCATION; |
| ASSERT(scope_->arguments_shadow() != NULL); |
| // We don't want to do lazy arguments allocation for functions that |
| // have heap-allocated contexts, because it interfers with the |
| // uninitialized const tracking in the context objects. |
| return (scope_->num_heap_slots() > 0) |
| ? EAGER_ARGUMENTS_ALLOCATION |
| : LAZY_ARGUMENTS_ALLOCATION; |
| } |
| |
| |
| Result CodeGenerator::StoreArgumentsObject(bool initial) { |
| ArgumentsAllocationMode mode = ArgumentsMode(); |
| ASSERT(mode != NO_ARGUMENTS_ALLOCATION); |
| |
| Comment cmnt(masm_, "[ store arguments object"); |
| if (mode == LAZY_ARGUMENTS_ALLOCATION && initial) { |
| // When using lazy arguments allocation, we store the hole value |
| // as a sentinel indicating that the arguments object hasn't been |
| // allocated yet. |
| frame_->Push(Factory::the_hole_value()); |
| } else { |
| ArgumentsAccessStub stub(ArgumentsAccessStub::NEW_OBJECT); |
| frame_->PushFunction(); |
| frame_->PushReceiverSlotAddress(); |
| frame_->Push(Smi::FromInt(scope_->num_parameters())); |
| Result result = frame_->CallStub(&stub, 3); |
| frame_->Push(&result); |
| } |
| |
| { Reference shadow_ref(this, scope_->arguments_shadow()); |
| Reference arguments_ref(this, scope_->arguments()); |
| ASSERT(shadow_ref.is_slot() && arguments_ref.is_slot()); |
| // Here we rely on the convenient property that references to slot |
| // take up zero space in the frame (ie, it doesn't matter that the |
| // stored value is actually below the reference on the frame). |
| JumpTarget done; |
| bool skip_arguments = false; |
| if (mode == LAZY_ARGUMENTS_ALLOCATION && !initial) { |
| // We have to skip storing into the arguments slot if it has |
| // already been written to. This can happen if the a function |
| // has a local variable named 'arguments'. |
| LoadFromSlot(scope_->arguments()->var()->slot(), NOT_INSIDE_TYPEOF); |
| Result arguments = frame_->Pop(); |
| if (arguments.is_constant()) { |
| // We have to skip updating the arguments object if it has |
| // been assigned a proper value. |
| skip_arguments = !arguments.handle()->IsTheHole(); |
| } else { |
| __ CompareRoot(arguments.reg(), Heap::kTheHoleValueRootIndex); |
| arguments.Unuse(); |
| done.Branch(not_equal); |
| } |
| } |
| if (!skip_arguments) { |
| arguments_ref.SetValue(NOT_CONST_INIT); |
| if (mode == LAZY_ARGUMENTS_ALLOCATION) done.Bind(); |
| } |
| shadow_ref.SetValue(NOT_CONST_INIT); |
| } |
| return frame_->Pop(); |
| } |
| |
| |
| // TODO(1241834): Get rid of this function in favor of just using Load, now |
| // that we have the INSIDE_TYPEOF typeof state. => Need to handle global |
| // variables w/o reference errors elsewhere. |
| void CodeGenerator::LoadTypeofExpression(Expression* x) { |
| Variable* variable = x->AsVariableProxy()->AsVariable(); |
| if (variable != NULL && !variable->is_this() && variable->is_global()) { |
| // NOTE: This is somewhat nasty. We force the compiler to load |
| // the variable as if through '<global>.<variable>' to make sure we |
| // do not get reference errors. |
| Slot global(variable, Slot::CONTEXT, Context::GLOBAL_INDEX); |
| Literal key(variable->name()); |
| // TODO(1241834): Fetch the position from the variable instead of using |
| // no position. |
| Property property(&global, &key, RelocInfo::kNoPosition); |
| Load(&property); |
| } else { |
| Load(x, INSIDE_TYPEOF); |
| } |
| } |
| |
| |
| void CodeGenerator::Comparison(Condition cc, |
| bool strict, |
| ControlDestination* dest) { |
| // Strict only makes sense for equality comparisons. |
| ASSERT(!strict || cc == equal); |
| |
| Result left_side; |
| Result right_side; |
| // Implement '>' and '<=' by reversal to obtain ECMA-262 conversion order. |
| if (cc == greater || cc == less_equal) { |
| cc = ReverseCondition(cc); |
| left_side = frame_->Pop(); |
| right_side = frame_->Pop(); |
| } else { |
| right_side = frame_->Pop(); |
| left_side = frame_->Pop(); |
| } |
| ASSERT(cc == less || cc == equal || cc == greater_equal); |
| |
| // If either side is a constant smi, optimize the comparison. |
| bool left_side_constant_smi = |
| left_side.is_constant() && left_side.handle()->IsSmi(); |
| bool right_side_constant_smi = |
| right_side.is_constant() && right_side.handle()->IsSmi(); |
| bool left_side_constant_null = |
| left_side.is_constant() && left_side.handle()->IsNull(); |
| bool right_side_constant_null = |
| right_side.is_constant() && right_side.handle()->IsNull(); |
| |
| if (left_side_constant_smi || right_side_constant_smi) { |
| if (left_side_constant_smi && right_side_constant_smi) { |
| // Trivial case, comparing two constants. |
| int left_value = Smi::cast(*left_side.handle())->value(); |
| int right_value = Smi::cast(*right_side.handle())->value(); |
| switch (cc) { |
| case less: |
| dest->Goto(left_value < right_value); |
| break; |
| case equal: |
| dest->Goto(left_value == right_value); |
| break; |
| case greater_equal: |
| dest->Goto(left_value >= right_value); |
| break; |
| default: |
| UNREACHABLE(); |
| } |
| } else { // Only one side is a constant Smi. |
| // If left side is a constant Smi, reverse the operands. |
| // Since one side is a constant Smi, conversion order does not matter. |
| if (left_side_constant_smi) { |
| Result temp = left_side; |
| left_side = right_side; |
| right_side = temp; |
| cc = ReverseCondition(cc); |
| // This may reintroduce greater or less_equal as the value of cc. |
| // CompareStub and the inline code both support all values of cc. |
| } |
| // Implement comparison against a constant Smi, inlining the case |
| // where both sides are Smis. |
| left_side.ToRegister(); |
| |
| // Here we split control flow to the stub call and inlined cases |
| // before finally splitting it to the control destination. We use |
| // a jump target and branching to duplicate the virtual frame at |
| // the first split. We manually handle the off-frame references |
| // by reconstituting them on the non-fall-through path. |
| JumpTarget is_smi; |
| Register left_reg = left_side.reg(); |
| Handle<Object> right_val = right_side.handle(); |
| |
| Condition left_is_smi = masm_->CheckSmi(left_side.reg()); |
| is_smi.Branch(left_is_smi); |
| |
| // Setup and call the compare stub. |
| CompareStub stub(cc, strict); |
| Result result = frame_->CallStub(&stub, &left_side, &right_side); |
| result.ToRegister(); |
| __ testq(result.reg(), result.reg()); |
| result.Unuse(); |
| dest->true_target()->Branch(cc); |
| dest->false_target()->Jump(); |
| |
| is_smi.Bind(); |
| left_side = Result(left_reg); |
| right_side = Result(right_val); |
| // Test smi equality and comparison by signed int comparison. |
| // Both sides are smis, so we can use an Immediate. |
| __ cmpl(left_side.reg(), Immediate(Smi::cast(*right_side.handle()))); |
| left_side.Unuse(); |
| right_side.Unuse(); |
| dest->Split(cc); |
| } |
| } else if (cc == equal && |
| (left_side_constant_null || right_side_constant_null)) { |
| // To make null checks efficient, we check if either the left side or |
| // the right side is the constant 'null'. |
| // If so, we optimize the code by inlining a null check instead of |
| // calling the (very) general runtime routine for checking equality. |
| Result operand = left_side_constant_null ? right_side : left_side; |
| right_side.Unuse(); |
| left_side.Unuse(); |
| operand.ToRegister(); |
| __ CompareRoot(operand.reg(), Heap::kNullValueRootIndex); |
| if (strict) { |
| operand.Unuse(); |
| dest->Split(equal); |
| } else { |
| // The 'null' value is only equal to 'undefined' if using non-strict |
| // comparisons. |
| dest->true_target()->Branch(equal); |
| __ CompareRoot(operand.reg(), Heap::kUndefinedValueRootIndex); |
| dest->true_target()->Branch(equal); |
| Condition is_smi = masm_->CheckSmi(operand.reg()); |
| dest->false_target()->Branch(is_smi); |
| |
| // It can be an undetectable object. |
| // Use a scratch register in preference to spilling operand.reg(). |
| Result temp = allocator()->Allocate(); |
| ASSERT(temp.is_valid()); |
| __ movq(temp.reg(), |
| FieldOperand(operand.reg(), HeapObject::kMapOffset)); |
| __ testb(FieldOperand(temp.reg(), Map::kBitFieldOffset), |
| Immediate(1 << Map::kIsUndetectable)); |
| temp.Unuse(); |
| operand.Unuse(); |
| dest->Split(not_zero); |
| } |
| } else { // Neither side is a constant Smi or null. |
| // If either side is a non-smi constant, skip the smi check. |
| bool known_non_smi = |
| (left_side.is_constant() && !left_side.handle()->IsSmi()) || |
| (right_side.is_constant() && !right_side.handle()->IsSmi()); |
| left_side.ToRegister(); |
| right_side.ToRegister(); |
| |
| if (known_non_smi) { |
| // When non-smi, call out to the compare stub. |
| CompareStub stub(cc, strict); |
| Result answer = frame_->CallStub(&stub, &left_side, &right_side); |
| // The result is a Smi, which is negative, zero, or positive. |
| __ testl(answer.reg(), answer.reg()); // Both zero and sign flag right. |
| answer.Unuse(); |
| dest->Split(cc); |
| } else { |
| // Here we split control flow to the stub call and inlined cases |
| // before finally splitting it to the control destination. We use |
| // a jump target and branching to duplicate the virtual frame at |
| // the first split. We manually handle the off-frame references |
| // by reconstituting them on the non-fall-through path. |
| JumpTarget is_smi; |
| Register left_reg = left_side.reg(); |
| Register right_reg = right_side.reg(); |
| |
| Condition both_smi = masm_->CheckBothSmi(left_reg, right_reg); |
| is_smi.Branch(both_smi); |
| // When non-smi, call out to the compare stub. |
| CompareStub stub(cc, strict); |
| Result answer = frame_->CallStub(&stub, &left_side, &right_side); |
| __ testl(answer.reg(), answer.reg()); // Sets both zero and sign flags. |
| answer.Unuse(); |
| dest->true_target()->Branch(cc); |
| dest->false_target()->Jump(); |
| |
| is_smi.Bind(); |
| left_side = Result(left_reg); |
| right_side = Result(right_reg); |
| __ cmpl(left_side.reg(), right_side.reg()); |
| right_side.Unuse(); |
| left_side.Unuse(); |
| dest->Split(cc); |
| } |
| } |
| } |
| |
| |
| class DeferredInlineBinaryOperation: public DeferredCode { |
| public: |
| DeferredInlineBinaryOperation(Token::Value op, |
| Register dst, |
| Register left, |
| Register right, |
| OverwriteMode mode) |
| : op_(op), dst_(dst), left_(left), right_(right), mode_(mode) { |
| set_comment("[ DeferredInlineBinaryOperation"); |
| } |
| |
| virtual void Generate(); |
| |
| private: |
| Token::Value op_; |
| Register dst_; |
| Register left_; |
| Register right_; |
| OverwriteMode mode_; |
| }; |
| |
| |
| void DeferredInlineBinaryOperation::Generate() { |
| __ push(left_); |
| __ push(right_); |
| GenericBinaryOpStub stub(op_, mode_, SMI_CODE_INLINED); |
| __ CallStub(&stub); |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| void CodeGenerator::GenericBinaryOperation(Token::Value op, |
| SmiAnalysis* type, |
| OverwriteMode overwrite_mode) { |
| Comment cmnt(masm_, "[ BinaryOperation"); |
| Comment cmnt_token(masm_, Token::String(op)); |
| |
| if (op == Token::COMMA) { |
| // Simply discard left value. |
| frame_->Nip(1); |
| return; |
| } |
| |
| // Set the flags based on the operation, type and loop nesting level. |
| GenericBinaryFlags flags; |
| switch (op) { |
| case Token::BIT_OR: |
| case Token::BIT_AND: |
| case Token::BIT_XOR: |
| case Token::SHL: |
| case Token::SHR: |
| case Token::SAR: |
| // Bit operations always assume they likely operate on Smis. Still only |
| // generate the inline Smi check code if this operation is part of a loop. |
| flags = (loop_nesting() > 0) |
| ? SMI_CODE_INLINED |
| : SMI_CODE_IN_STUB; |
| break; |
| |
| default: |
| // By default only inline the Smi check code for likely smis if this |
| // operation is part of a loop. |
| flags = ((loop_nesting() > 0) && type->IsLikelySmi()) |
| ? SMI_CODE_INLINED |
| : SMI_CODE_IN_STUB; |
| break; |
| } |
| |
| Result right = frame_->Pop(); |
| Result left = frame_->Pop(); |
| |
| if (op == Token::ADD) { |
| bool left_is_string = left.is_constant() && left.handle()->IsString(); |
| bool right_is_string = right.is_constant() && right.handle()->IsString(); |
| if (left_is_string || right_is_string) { |
| frame_->Push(&left); |
| frame_->Push(&right); |
| Result answer; |
| if (left_is_string) { |
| if (right_is_string) { |
| // TODO(lrn): if both are constant strings |
| // -- do a compile time cons, if allocation during codegen is allowed. |
| answer = frame_->CallRuntime(Runtime::kStringAdd, 2); |
| } else { |
| answer = |
| frame_->InvokeBuiltin(Builtins::STRING_ADD_LEFT, CALL_FUNCTION, 2); |
| } |
| } else if (right_is_string) { |
| answer = |
| frame_->InvokeBuiltin(Builtins::STRING_ADD_RIGHT, CALL_FUNCTION, 2); |
| } |
| frame_->Push(&answer); |
| return; |
| } |
| // Neither operand is known to be a string. |
| } |
| |
| bool left_is_smi = left.is_constant() && left.handle()->IsSmi(); |
| bool left_is_non_smi = left.is_constant() && !left.handle()->IsSmi(); |
| bool right_is_smi = right.is_constant() && right.handle()->IsSmi(); |
| bool right_is_non_smi = right.is_constant() && !right.handle()->IsSmi(); |
| bool generate_no_smi_code = false; // No smi code at all, inline or in stub. |
| |
| if (left_is_smi && right_is_smi) { |
| // Compute the constant result at compile time, and leave it on the frame. |
| int left_int = Smi::cast(*left.handle())->value(); |
| int right_int = Smi::cast(*right.handle())->value(); |
| if (FoldConstantSmis(op, left_int, right_int)) return; |
| } |
| |
| if (left_is_non_smi || right_is_non_smi) { |
| // Set flag so that we go straight to the slow case, with no smi code. |
| generate_no_smi_code = true; |
| } else if (right_is_smi) { |
| ConstantSmiBinaryOperation(op, &left, right.handle(), |
| type, false, overwrite_mode); |
| return; |
| } else if (left_is_smi) { |
| ConstantSmiBinaryOperation(op, &right, left.handle(), |
| type, true, overwrite_mode); |
| return; |
| } |
| |
| if (flags == SMI_CODE_INLINED && !generate_no_smi_code) { |
| LikelySmiBinaryOperation(op, &left, &right, overwrite_mode); |
| } else { |
| frame_->Push(&left); |
| frame_->Push(&right); |
| // If we know the arguments aren't smis, use the binary operation stub |
| // that does not check for the fast smi case. |
| // The same stub is used for NO_SMI_CODE and SMI_CODE_INLINED. |
| if (generate_no_smi_code) { |
| flags = SMI_CODE_INLINED; |
| } |
| GenericBinaryOpStub stub(op, overwrite_mode, flags); |
| Result answer = frame_->CallStub(&stub, 2); |
| frame_->Push(&answer); |
| } |
| } |
| |
| |
| // Emit a LoadIC call to get the value from receiver and leave it in |
| // dst. The receiver register is restored after the call. |
| class DeferredReferenceGetNamedValue: public DeferredCode { |
| public: |
| DeferredReferenceGetNamedValue(Register dst, |
| Register receiver, |
| Handle<String> name) |
| : dst_(dst), receiver_(receiver), name_(name) { |
| set_comment("[ DeferredReferenceGetNamedValue"); |
| } |
| |
| virtual void Generate(); |
| |
| Label* patch_site() { return &patch_site_; } |
| |
| private: |
| Label patch_site_; |
| Register dst_; |
| Register receiver_; |
| Handle<String> name_; |
| }; |
| |
| |
| void DeferredReferenceGetNamedValue::Generate() { |
| __ push(receiver_); |
| __ Move(rcx, name_); |
| Handle<Code> ic(Builtins::builtin(Builtins::LoadIC_Initialize)); |
| __ Call(ic, RelocInfo::CODE_TARGET); |
| // The call must be followed by a test rax instruction to indicate |
| // that the inobject property case was inlined. |
| // |
| // Store the delta to the map check instruction here in the test |
| // instruction. Use masm_-> instead of the __ macro since the |
| // latter can't return a value. |
| int delta_to_patch_site = masm_->SizeOfCodeGeneratedSince(patch_site()); |
| // Here we use masm_-> instead of the __ macro because this is the |
| // instruction that gets patched and coverage code gets in the way. |
| masm_->testl(rax, Immediate(-delta_to_patch_site)); |
| __ IncrementCounter(&Counters::named_load_inline_miss, 1); |
| |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| __ pop(receiver_); |
| } |
| |
| |
| void DeferredInlineSmiAdd::Generate() { |
| __ push(dst_); |
| __ push(Immediate(value_)); |
| GenericBinaryOpStub igostub(Token::ADD, overwrite_mode_, SMI_CODE_INLINED); |
| __ CallStub(&igostub); |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| void DeferredInlineSmiAddReversed::Generate() { |
| __ push(Immediate(value_)); // Note: sign extended. |
| __ push(dst_); |
| GenericBinaryOpStub igostub(Token::ADD, overwrite_mode_, SMI_CODE_INLINED); |
| __ CallStub(&igostub); |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| void DeferredInlineSmiSub::Generate() { |
| __ push(dst_); |
| __ push(Immediate(value_)); // Note: sign extended. |
| GenericBinaryOpStub igostub(Token::SUB, overwrite_mode_, SMI_CODE_INLINED); |
| __ CallStub(&igostub); |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| void DeferredInlineSmiOperation::Generate() { |
| __ push(src_); |
| __ push(Immediate(value_)); // Note: sign extended. |
| // For mod we don't generate all the Smi code inline. |
| GenericBinaryOpStub stub( |
| op_, |
| overwrite_mode_, |
| (op_ == Token::MOD) ? SMI_CODE_IN_STUB : SMI_CODE_INLINED); |
| __ CallStub(&stub); |
| if (!dst_.is(rax)) __ movq(dst_, rax); |
| } |
| |
| |
| void CodeGenerator::ConstantSmiBinaryOperation(Token::Value op, |
| Result* operand, |
| Handle<Object> value, |
| SmiAnalysis* type, |
| bool reversed, |
| OverwriteMode overwrite_mode) { |
| // NOTE: This is an attempt to inline (a bit) more of the code for |
| // some possible smi operations (like + and -) when (at least) one |
| // of the operands is a constant smi. |
| // Consumes the argument "operand". |
| |
| // TODO(199): Optimize some special cases of operations involving a |
| // smi literal (multiply by 2, shift by 0, etc.). |
| if (IsUnsafeSmi(value)) { |
| Result unsafe_operand(value); |
| if (reversed) { |
| LikelySmiBinaryOperation(op, &unsafe_operand, operand, |
| overwrite_mode); |
| } else { |
| LikelySmiBinaryOperation(op, operand, &unsafe_operand, |
| overwrite_mode); |
| } |
| ASSERT(!operand->is_valid()); |
| return; |
| } |
| |
| // Get the literal value. |
| Smi* smi_value = Smi::cast(*value); |
| int int_value = smi_value->value(); |
| |
| switch (op) { |
| case Token::ADD: { |
| operand->ToRegister(); |
| frame_->Spill(operand->reg()); |
| DeferredCode* deferred = NULL; |
| if (reversed) { |
| deferred = new DeferredInlineSmiAddReversed(operand->reg(), |
| smi_value, |
| overwrite_mode); |
| } else { |
| deferred = new DeferredInlineSmiAdd(operand->reg(), |
| smi_value, |
| overwrite_mode); |
| } |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| __ SmiAddConstant(operand->reg(), |
| operand->reg(), |
| int_value, |
| deferred->entry_label()); |
| deferred->BindExit(); |
| frame_->Push(operand); |
| break; |
| } |
| |
| case Token::SUB: { |
| if (reversed) { |
| Result constant_operand(value); |
| LikelySmiBinaryOperation(op, &constant_operand, operand, |
| overwrite_mode); |
| } else { |
| operand->ToRegister(); |
| frame_->Spill(operand->reg()); |
| DeferredCode* deferred = new DeferredInlineSmiSub(operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| // A smi currently fits in a 32-bit Immediate. |
| __ SmiSubConstant(operand->reg(), |
| operand->reg(), |
| int_value, |
| deferred->entry_label()); |
| deferred->BindExit(); |
| frame_->Push(operand); |
| } |
| break; |
| } |
| |
| case Token::SAR: |
| if (reversed) { |
| Result constant_operand(value); |
| LikelySmiBinaryOperation(op, &constant_operand, operand, |
| overwrite_mode); |
| } else { |
| // Only the least significant 5 bits of the shift value are used. |
| // In the slow case, this masking is done inside the runtime call. |
| int shift_value = int_value & 0x1f; |
| operand->ToRegister(); |
| frame_->Spill(operand->reg()); |
| DeferredInlineSmiOperation* deferred = |
| new DeferredInlineSmiOperation(op, |
| operand->reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| __ SmiShiftArithmeticRightConstant(operand->reg(), |
| operand->reg(), |
| shift_value); |
| deferred->BindExit(); |
| frame_->Push(operand); |
| } |
| break; |
| |
| case Token::SHR: |
| if (reversed) { |
| Result constant_operand(value); |
| LikelySmiBinaryOperation(op, &constant_operand, operand, |
| overwrite_mode); |
| } else { |
| // Only the least significant 5 bits of the shift value are used. |
| // In the slow case, this masking is done inside the runtime call. |
| int shift_value = int_value & 0x1f; |
| operand->ToRegister(); |
| Result answer = allocator()->Allocate(); |
| ASSERT(answer.is_valid()); |
| DeferredInlineSmiOperation* deferred = |
| new DeferredInlineSmiOperation(op, |
| answer.reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| __ SmiShiftLogicalRightConstant(answer.reg(), |
| operand->reg(), |
| shift_value, |
| deferred->entry_label()); |
| deferred->BindExit(); |
| operand->Unuse(); |
| frame_->Push(&answer); |
| } |
| break; |
| |
| case Token::SHL: |
| if (reversed) { |
| Result constant_operand(value); |
| LikelySmiBinaryOperation(op, &constant_operand, operand, |
| overwrite_mode); |
| } else { |
| // Only the least significant 5 bits of the shift value are used. |
| // In the slow case, this masking is done inside the runtime call. |
| int shift_value = int_value & 0x1f; |
| operand->ToRegister(); |
| if (shift_value == 0) { |
| // Spill operand so it can be overwritten in the slow case. |
| frame_->Spill(operand->reg()); |
| DeferredInlineSmiOperation* deferred = |
| new DeferredInlineSmiOperation(op, |
| operand->reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| deferred->BindExit(); |
| frame_->Push(operand); |
| } else { |
| // Use a fresh temporary for nonzero shift values. |
| Result answer = allocator()->Allocate(); |
| ASSERT(answer.is_valid()); |
| DeferredInlineSmiOperation* deferred = |
| new DeferredInlineSmiOperation(op, |
| answer.reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| __ SmiShiftLeftConstant(answer.reg(), |
| operand->reg(), |
| shift_value, |
| deferred->entry_label()); |
| deferred->BindExit(); |
| operand->Unuse(); |
| frame_->Push(&answer); |
| } |
| } |
| break; |
| |
| case Token::BIT_OR: |
| case Token::BIT_XOR: |
| case Token::BIT_AND: { |
| operand->ToRegister(); |
| frame_->Spill(operand->reg()); |
| if (reversed) { |
| // Bit operations with a constant smi are commutative. |
| // We can swap left and right operands with no problem. |
| // Swap left and right overwrite modes. 0->0, 1->2, 2->1. |
| overwrite_mode = static_cast<OverwriteMode>((2 * overwrite_mode) % 3); |
| } |
| DeferredCode* deferred = new DeferredInlineSmiOperation(op, |
| operand->reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| __ JumpIfNotSmi(operand->reg(), deferred->entry_label()); |
| if (op == Token::BIT_AND) { |
| __ SmiAndConstant(operand->reg(), operand->reg(), int_value); |
| } else if (op == Token::BIT_XOR) { |
| if (int_value != 0) { |
| __ SmiXorConstant(operand->reg(), operand->reg(), int_value); |
| } |
| } else { |
| ASSERT(op == Token::BIT_OR); |
| if (int_value != 0) { |
| __ SmiOrConstant(operand->reg(), operand->reg(), int_value); |
| } |
| } |
| deferred->BindExit(); |
| frame_->Push(operand); |
| break; |
| } |
| |
| // Generate inline code for mod of powers of 2 and negative powers of 2. |
| case Token::MOD: |
| if (!reversed && |
| int_value != 0 && |
| (IsPowerOf2(int_value) || IsPowerOf2(-int_value))) { |
| operand->ToRegister(); |
| frame_->Spill(operand->reg()); |
| DeferredCode* deferred = new DeferredInlineSmiOperation(op, |
| operand->reg(), |
| operand->reg(), |
| smi_value, |
| overwrite_mode); |
| // Check for negative or non-Smi left hand side. |
| __ JumpIfNotPositiveSmi(operand->reg(), deferred->entry_label()); |
| if (int_value < 0) int_value = -int_value; |
| if (int_value == 1) { |
| __ movl(operand->reg(), Immediate(Smi::FromInt(0))); |
| } else { |
| __ SmiAndConstant(operand->reg(), operand->reg(), int_value - 1); |
| } |
| deferred->BindExit(); |
| frame_->Push(operand); |
| break; // This break only applies if we generated code for MOD. |
| } |
| // Fall through if we did not find a power of 2 on the right hand side! |
| // The next case must be the default. |
| |
| default: { |
| Result constant_operand(value); |
| if (reversed) { |
| LikelySmiBinaryOperation(op, &constant_operand, operand, |
| overwrite_mode); |
| } else { |
| LikelySmiBinaryOperation(op, operand, &constant_operand, |
| overwrite_mode); |
| } |
| break; |
| } |
| } |
| ASSERT(!operand->is_valid()); |
| } |
| |
| void CodeGenerator::LikelySmiBinaryOperation(Token::Value op, |
| Result* left, |
| Result* right, |
| OverwriteMode overwrite_mode) { |
| // Special handling of div and mod because they use fixed registers. |
| if (op == Token::DIV || op == Token::MOD) { |
| // We need rax as the quotient register, rdx as the remainder |
| // register, neither left nor right in rax or rdx, and left copied |
| // to rax. |
| Result quotient; |
| Result remainder; |
| bool left_is_in_rax = false; |
| // Step 1: get rax for quotient. |
| if ((left->is_register() && left->reg().is(rax)) || |
| (right->is_register() && right->reg().is(rax))) { |
| // One or both is in rax. Use a fresh non-rdx register for |
| // them. |
| Result fresh = allocator_->Allocate(); |
| ASSERT(fresh.is_valid()); |
| if (fresh.reg().is(rdx)) { |
| remainder = fresh; |
| fresh = allocator_->Allocate(); |
| ASSERT(fresh.is_valid()); |
| } |
| if (left->is_register() && left->reg().is(rax)) { |
| quotient = *left; |
| *left = fresh; |
| left_is_in_rax = true; |
| } |
| if (right->is_register() && right->reg().is(rax)) { |
| quotient = *right; |
| *right = fresh; |
| } |
| __ movq(fresh.reg(), rax); |
| } else { |
| // Neither left nor right is in rax. |
| quotient = allocator_->Allocate(rax); |
| } |
| ASSERT(quotient.is_register() && quotient.reg().is(rax)); |
| ASSERT(!(left->is_register() && left->reg().is(rax))); |
| ASSERT(!(right->is_register() && right->reg().is(rax))); |
| |
| // Step 2: get rdx for remainder if necessary. |
| if (!remainder.is_valid()) { |
| if ((left->is_register() && left->reg().is(rdx)) || |
| (right->is_register() && right->reg().is(rdx))) { |
| Result fresh = allocator_->Allocate(); |
| ASSERT(fresh.is_valid()); |
| if (left->is_register() && left->reg().is(rdx)) { |
| remainder = *left; |
| *left = fresh; |
| } |
| if (right->is_register() && right->reg().is(rdx)) { |
| remainder = *right; |
| *right = fresh; |
| } |
| __ movq(fresh.reg(), rdx); |
| } else { |
| // Neither left nor right is in rdx. |
| remainder = allocator_->Allocate(rdx); |
| } |
| } |
| ASSERT(remainder.is_register() && remainder.reg().is(rdx)); |
| ASSERT(!(left->is_register() && left->reg().is(rdx))); |
| ASSERT(!(right->is_register() && right->reg().is(rdx))); |
| |
| left->ToRegister(); |
| right->ToRegister(); |
| frame_->Spill(rax); |
| frame_->Spill(rdx); |
| |
| // Check that left and right are smi tagged. |
| DeferredInlineBinaryOperation* deferred = |
| new DeferredInlineBinaryOperation(op, |
| (op == Token::DIV) ? rax : rdx, |
| left->reg(), |
| right->reg(), |
| overwrite_mode); |
| __ JumpIfNotBothSmi(left->reg(), right->reg(), deferred->entry_label()); |
| |
| if (op == Token::DIV) { |
| __ SmiDiv(rax, left->reg(), right->reg(), deferred->entry_label()); |
| deferred->BindExit(); |
| left->Unuse(); |
| right->Unuse(); |
| frame_->Push("ient); |
| } else { |
| ASSERT(op == Token::MOD); |
| __ SmiMod(rdx, left->reg(), right->reg(), deferred->entry_label()); |
| deferred->BindExit(); |
| left->Unuse(); |
| right->Unuse(); |
| frame_->Push(&remainder); |
| } |
| return; |
| } |
| |
| // Special handling of shift operations because they use fixed |
| // registers. |
| if (op == Token::SHL || op == Token::SHR || op == Token::SAR) { |
| // Move left out of rcx if necessary. |
| if (left->is_register() && left->reg().is(rcx)) { |
| *left = allocator_->Allocate(); |
| ASSERT(left->is_valid()); |
| __ movq(left->reg(), rcx); |
| } |
| right->ToRegister(rcx); |
| left->ToRegister(); |
| ASSERT(left->is_register() && !left->reg().is(rcx)); |
| ASSERT(right->is_register() && right->reg().is(rcx)); |
| |
| // We will modify right, it must be spilled. |
| frame_->Spill(rcx); |
| |
| // Use a fresh answer register to avoid spilling the left operand. |
| Result answer = allocator_->Allocate(); |
| ASSERT(answer.is_valid()); |
| // Check that both operands are smis using the answer register as a |
| // temporary. |
| DeferredInlineBinaryOperation* deferred = |
| new DeferredInlineBinaryOperation(op, |
| answer.reg(), |
| left->reg(), |
| rcx, |
| overwrite_mode); |
| __ movq(answer.reg(), left->reg()); |
| __ or_(answer.reg(), rcx); |
| __ JumpIfNotSmi(answer.reg(), deferred->entry_label()); |
| |
| // Perform the operation. |
| switch (op) { |
| case Token::SAR: |
| __ SmiShiftArithmeticRight(answer.reg(), left->reg(), rcx); |
| break; |
| case Token::SHR: { |
| __ SmiShiftLogicalRight(answer.reg(), |
| left->reg(), |
| rcx, |
| deferred->entry_label()); |
| break; |
| } |
| case Token::SHL: { |
| __ SmiShiftLeft(answer.reg(), |
| left->reg(), |
| rcx, |
| deferred->entry_label()); |
| break; |
| } |
| default: |
| UNREACHABLE(); |
| } |
| deferred->BindExit(); |
| left->Unuse(); |
| right->Unuse(); |
| frame_->Push(&answer); |
| return; |
| } |
| |
| // Handle the other binary operations. |
| left->ToRegister(); |
| right->ToRegister(); |
| // A newly allocated register answer is used to hold the answer. The |
| // registers containing left and right are not modified so they don't |
| // need to be spilled in the fast case. |
| Result answer = allocator_->Allocate(); |
| ASSERT(answer.is_valid()); |
| |
| // Perform the smi tag check. |
| DeferredInlineBinaryOperation* deferred = |
| new DeferredInlineBinaryOperation(op, |
| answer.reg(), |
| left->reg(), |
| right->reg(), |
| overwrite_mode); |
| __ JumpIfNotBothSmi(left->reg(), right->reg(), deferred->entry_label()); |
| |
| switch (op) { |
| case Token::ADD: |
| __ SmiAdd(answer.reg(), |
| left->reg(), |
| right->reg(), |
| deferred->entry_label()); |
| break; |
| |
| case Token::SUB: |
| __ SmiSub(answer.reg(), |
| left->reg(), |
| right->reg(), |
| deferred->entry_label()); |
| break; |
| |
| case Token::MUL: { |
| __ SmiMul(answer.reg(), |
| left->reg(), |
| right->reg(), |
| deferred->entry_label()); |
| break; |
| } |
| |
| case Token::BIT_OR: |
| __ SmiOr(answer.reg(), left->reg(), right->reg()); |
| break; |
| |
| case Token::BIT_AND: |
| __ SmiAnd(answer.reg(), left->reg(), right->reg()); |
| break; |
| |
| case Token::BIT_XOR: |
| __ SmiXor(answer.reg(), left->reg(), right->reg()); |
| break; |
| |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| deferred->BindExit(); |
| left->Unuse(); |
| right->Unuse(); |
| frame_->Push(&answer); |
| } |
| |
| |
| #undef __ |
| #define __ ACCESS_MASM(masm) |
| |
| |
| Handle<String> Reference::GetName() { |
| ASSERT(type_ == NAMED); |
| Property* property = expression_->AsProperty(); |
| if (property == NULL) { |
| // Global variable reference treated as a named property reference. |
| VariableProxy* proxy = expression_->AsVariableProxy(); |
| ASSERT(proxy->AsVariable() != NULL); |
| ASSERT(proxy->AsVariable()->is_global()); |
| return proxy->name(); |
| } else { |
| Literal* raw_name = property->key()->AsLiteral(); |
| ASSERT(raw_name != NULL); |
| return Handle<String>(String::cast(*raw_name->handle())); |
| } |
| } |
| |
| |
| void Reference::GetValue(TypeofState typeof_state) { |
| ASSERT(!cgen_->in_spilled_code()); |
| ASSERT(cgen_->HasValidEntryRegisters()); |
| ASSERT(!is_illegal()); |
| MacroAssembler* masm = cgen_->masm(); |
| |
| // Record the source position for the property load. |
| Property* property = expression_->AsProperty(); |
| if (property != NULL) { |
| cgen_->CodeForSourcePosition(property->position()); |
| } |
| |
| switch (type_) { |
| case SLOT: { |
| Comment cmnt(masm, "[ Load from Slot"); |
| Slot* slot = expression_->AsVariableProxy()->AsVariable()->slot(); |
| ASSERT(slot != NULL); |
| cgen_->LoadFromSlotCheckForArguments(slot, typeof_state); |
| break; |
| } |
| |
| case NAMED: { |
| // TODO(1241834): Make sure that it is safe to ignore the |
| // distinction between expressions in a typeof and not in a |
| // typeof. If there is a chance that reference errors can be |
| // thrown below, we must distinguish between the two kinds of |
| // loads (typeof expression loads must not throw a reference |
| // error). |
| Variable* var = expression_->AsVariableProxy()->AsVariable(); |
| bool is_global = var != NULL; |
| ASSERT(!is_global || var->is_global()); |
| |
| // Do not inline the inobject property case for loads from the global |
| // object. Also do not inline for unoptimized code. This saves time |
| // in the code generator. Unoptimized code is toplevel code or code |
| // that is not in a loop. |
| if (is_global || |
| cgen_->scope()->is_global_scope() || |
| cgen_->loop_nesting() == 0) { |
| Comment cmnt(masm, "[ Load from named Property"); |
| cgen_->frame()->Push(GetName()); |
| |
| RelocInfo::Mode mode = is_global |
| ? RelocInfo::CODE_TARGET_CONTEXT |
| : RelocInfo::CODE_TARGET; |
| Result answer = cgen_->frame()->CallLoadIC(mode); |
| // A test rax instruction following the call signals that the |
| // inobject property case was inlined. Ensure that there is not |
| // a test rax instruction here. |
| __ nop(); |
| cgen_->frame()->Push(&answer); |
| } else { |
| // Inline the inobject property case. |
| Comment cmnt(masm, "[ Inlined named property load"); |
| Result receiver = cgen_->frame()->Pop(); |
| receiver.ToRegister(); |
| Result value = cgen_->allocator()->Allocate(); |
| ASSERT(value.is_valid()); |
| // Cannot use r12 for receiver, because that changes |
| // the distance between a call and a fixup location, |
| // due to a special encoding of r12 as r/m in a ModR/M byte. |
| if (receiver.reg().is(r12)) { |
| // Swap receiver and value. |
| __ movq(value.reg(), receiver.reg()); |
| Result temp = receiver; |
| receiver = value; |
| value = temp; |
| cgen_->frame()->Spill(value.reg()); // r12 may have been shared. |
| } |
| |
| DeferredReferenceGetNamedValue* deferred = |
| new DeferredReferenceGetNamedValue(value.reg(), |
| receiver.reg(), |
| GetName()); |
| |
| // Check that the receiver is a heap object. |
| __ JumpIfSmi(receiver.reg(), deferred->entry_label()); |
| |
| __ bind(deferred->patch_site()); |
| // This is the map check instruction that will be patched (so we can't |
| // use the double underscore macro that may insert instructions). |
| // Initially use an invalid map to force a failure. |
| masm->Move(kScratchRegister, Factory::null_value()); |
| masm->cmpq(FieldOperand(receiver.reg(), HeapObject::kMapOffset), |
| kScratchRegister); |
| // This branch is always a forwards branch so it's always a fixed |
| // size which allows the assert below to succeed and patching to work. |
| // Don't use deferred->Branch(...), since that might add coverage code. |
| masm->j(not_equal, deferred->entry_label()); |
| |
| // The delta from the patch label to the load offset must be |
| // statically known. |
| ASSERT(masm->SizeOfCodeGeneratedSince(deferred->patch_site()) == |
| LoadIC::kOffsetToLoadInstruction); |
| // The initial (invalid) offset has to be large enough to force |
| // a 32-bit instruction encoding to allow patching with an |
| // arbitrary offset. Use kMaxInt (minus kHeapObjectTag). |
| int offset = kMaxInt; |
| masm->movq(value.reg(), FieldOperand(receiver.reg(), offset)); |
| |
| __ IncrementCounter(&Counters::named_load_inline, 1); |
| deferred->BindExit(); |
| cgen_->frame()->Push(&receiver); |
| cgen_->frame()->Push(&value); |
| } |
| break; |
| } |
| |
| case KEYED: { |
| // TODO(1241834): Make sure that this it is safe to ignore the |
| // distinction between expressions in a typeof and not in a typeof. |
| Comment cmnt(masm, "[ Load from keyed Property"); |
| Variable* var = expression_->AsVariableProxy()->AsVariable(); |
| bool is_global = var != NULL; |
| ASSERT(!is_global || var->is_global()); |
| |
| // Inline array load code if inside of a loop. We do not know |
| // the receiver map yet, so we initially generate the code with |
| // a check against an invalid map. In the inline cache code, we |
| // patch the map check if appropriate. |
| if (cgen_->loop_nesting() > 0) { |
| Comment cmnt(masm, "[ Inlined load from keyed Property"); |
| |
| Result key = cgen_->frame()->Pop(); |
| Result receiver = cgen_->frame()->Pop(); |
| key.ToRegister(); |
| receiver.ToRegister(); |
| |
| // Use a fresh temporary to load the elements without destroying |
| // the receiver which is needed for the deferred slow case. |
| Result elements = cgen_->allocator()->Allocate(); |
| ASSERT(elements.is_valid()); |
| |
| // Use a fresh temporary for the index and later the loaded |
| // value. |
| Result index = cgen_->allocator()->Allocate(); |
| ASSERT(index.is_valid()); |
| |
| DeferredReferenceGetKeyedValue* deferred = |
| new DeferredReferenceGetKeyedValue(index.reg(), |
| receiver.reg(), |
| key.reg(), |
| is_global); |
| |
| // Check that the receiver is not a smi (only needed if this |
| // is not a load from the global context) and that it has the |
| // expected map. |
| if (!is_global) { |
| __ JumpIfSmi(receiver.reg(), deferred->entry_label()); |
| } |
| |
| // Initially, use an invalid map. The map is patched in the IC |
| // initialization code. |
| __ bind(deferred->patch_site()); |
| // Use masm-> here instead of the double underscore macro since extra |
| // coverage code can interfere with the patching. |
| masm->movq(kScratchRegister, Factory::null_value(), |
| RelocInfo::EMBEDDED_OBJECT); |
| masm->cmpq(FieldOperand(receiver.reg(), HeapObject::kMapOffset), |
| kScratchRegister); |
| deferred->Branch(not_equal); |
| |
| // Check that the key is a non-negative smi. |
| __ JumpIfNotPositiveSmi(key.reg(), deferred->entry_label()); |
| |
| // Get the elements array from the receiver and check that it |
| // is not a dictionary. |
| __ movq(elements.reg(), |
| FieldOperand(receiver.reg(), JSObject::kElementsOffset)); |
| __ Cmp(FieldOperand(elements.reg(), HeapObject::kMapOffset), |
| Factory::fixed_array_map()); |
| deferred->Branch(not_equal); |
| |
| // Shift the key to get the actual index value and check that |
| // it is within bounds. |
| __ SmiToInteger32(index.reg(), key.reg()); |
| __ cmpl(index.reg(), |
| FieldOperand(elements.reg(), FixedArray::kLengthOffset)); |
| deferred->Branch(above_equal); |
| |
| // The index register holds the un-smi-tagged key. It has been |
| // zero-extended to 64-bits, so it can be used directly as index in the |
| // operand below. |
| // Load and check that the result is not the hole. We could |
| // reuse the index or elements register for the value. |
| // |
| // TODO(206): Consider whether it makes sense to try some |
| // heuristic about which register to reuse. For example, if |
| // one is rax, the we can reuse that one because the value |
| // coming from the deferred code will be in rax. |
| Result value = index; |
| __ movq(value.reg(), |
| Operand(elements.reg(), |
| index.reg(), |
| times_pointer_size, |
| FixedArray::kHeaderSize - kHeapObjectTag)); |
| elements.Unuse(); |
| index.Unuse(); |
| __ CompareRoot(value.reg(), Heap::kTheHoleValueRootIndex); |
| deferred->Branch(equal); |
| __ IncrementCounter(&Counters::keyed_load_inline, 1); |
| |
| deferred->BindExit(); |
| // Restore the receiver and key to the frame and push the |
| // result on top of it. |
| cgen_->frame()->Push(&receiver); |
| cgen_->frame()->Push(&key); |
| cgen_->frame()->Push(&value); |
| |
| } else { |
| Comment cmnt(masm, "[ Load from keyed Property"); |
| RelocInfo::Mode mode = is_global |
| ? RelocInfo::CODE_TARGET_CONTEXT |
| : RelocInfo::CODE_TARGET; |
| Result answer = cgen_->frame()->CallKeyedLoadIC(mode); |
| // Make sure that we do not have a test instruction after the |
| // call. A test instruction after the call is used to |
| // indicate that we have generated an inline version of the |
| // keyed load. The explicit nop instruction is here because |
| // the push that follows might be peep-hole optimized away. |
| __ nop(); |
| cgen_->frame()->Push(&answer); |
| } |
| break; |
| } |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| |
| void Reference::TakeValue(TypeofState typeof_state) { |
| // TODO(X64): This function is completely architecture independent. Move |
| // it somewhere shared. |
| |
| // For non-constant frame-allocated slots, we invalidate the value in the |
| // slot. For all others, we fall back on GetValue. |
| ASSERT(!cgen_->in_spilled_code()); |
| ASSERT(!is_illegal()); |
| if (type_ != SLOT) { |
| GetValue(typeof_state); |
| return; |
| } |
| |
| Slot* slot = expression_->AsVariableProxy()->AsVariable()->slot(); |
| ASSERT(slot != NULL); |
| if (slot->type() == Slot::LOOKUP || |
| slot->type() == Slot::CONTEXT || |
| slot->var()->mode() == Variable::CONST || |
| slot->is_arguments()) { |
| GetValue(typeof_state); |
| return; |
| } |
| |
| // Only non-constant, frame-allocated parameters and locals can reach |
| // here. Be careful not to use the optimizations for arguments |
| // object access since it may not have been initialized yet. |
| ASSERT(!slot->is_arguments()); |
| if (slot->type() == Slot::PARAMETER) { |
| cgen_->frame()->TakeParameterAt(slot->index()); |
| } else { |
| ASSERT(slot->type() == Slot::LOCAL); |
| cgen_->frame()->TakeLocalAt(slot->index()); |
| } |
| } |
| |
| |
| void Reference::SetValue(InitState init_state) { |
| ASSERT(cgen_->HasValidEntryRegisters()); |
| ASSERT(!is_illegal()); |
| MacroAssembler* masm = cgen_->masm(); |
| switch (type_) { |
| case SLOT: { |
| Comment cmnt(masm, "[ Store to Slot"); |
| Slot* slot = expression_->AsVariableProxy()->AsVariable()->slot(); |
| ASSERT(slot != NULL); |
| cgen_->StoreToSlot(slot, init_state); |
| break; |
| } |
| |
| case NAMED: { |
| Comment cmnt(masm, "[ Store to named Property"); |
| cgen_->frame()->Push(GetName()); |
| Result answer = cgen_->frame()->CallStoreIC(); |
| cgen_->frame()->Push(&answer); |
| break; |
| } |
| |
| case KEYED: { |
| Comment cmnt(masm, "[ Store to keyed Property"); |
| |
| // Generate inlined version of the keyed store if the code is in |
| // a loop and the key is likely to be a smi. |
| Property* property = expression()->AsProperty(); |
| ASSERT(property != NULL); |
| SmiAnalysis* key_smi_analysis = property->key()->type(); |
| |
| if (cgen_->loop_nesting() > 0 && key_smi_analysis->IsLikelySmi()) { |
| Comment cmnt(masm, "[ Inlined store to keyed Property"); |
| |
| // Get the receiver, key and value into registers. |
| Result value = cgen_->frame()->Pop(); |
| Result key = cgen_->frame()->Pop(); |
| Result receiver = cgen_->frame()->Pop(); |
| |
| Result tmp = cgen_->allocator_->Allocate(); |
| ASSERT(tmp.is_valid()); |
| |
| // Determine whether the value is a constant before putting it |
| // in a register. |
| bool value_is_constant = value.is_constant(); |
| |
| // Make sure that value, key and receiver are in registers. |
| value.ToRegister(); |
| key.ToRegister(); |
| receiver.ToRegister(); |
| |
| DeferredReferenceSetKeyedValue* deferred = |
| new DeferredReferenceSetKeyedValue(value.reg(), |
| key.reg(), |
| receiver.reg()); |
| |
| // Check that the value is a smi if it is not a constant. |
| // We can skip the write barrier for smis and constants. |
| if (!value_is_constant) { |
| __ JumpIfNotSmi(value.reg(), deferred->entry_label()); |
| } |
| |
| // Check that the key is a non-negative smi. |
| __ JumpIfNotPositiveSmi(key.reg(), deferred->entry_label()); |
| // Ensure that the smi is zero-extended. This is not guaranteed. |
| __ movl(key.reg(), key.reg()); |
| |
| // Check that the receiver is not a smi. |
| __ JumpIfSmi(receiver.reg(), deferred->entry_label()); |
| |
| // Check that the receiver is a JSArray. |
| __ CmpObjectType(receiver.reg(), JS_ARRAY_TYPE, kScratchRegister); |
| deferred->Branch(not_equal); |
| |
| // Check that the key is within bounds. Both the key and the |
| // length of the JSArray are smis, so compare only low 32 bits. |
| __ cmpl(key.reg(), |
| FieldOperand(receiver.reg(), JSArray::kLengthOffset)); |
| deferred->Branch(greater_equal); |
| |
| // Get the elements array from the receiver and check that it |
| // is a flat array (not a dictionary). |
| __ movq(tmp.reg(), |
| FieldOperand(receiver.reg(), JSObject::kElementsOffset)); |
| // Bind the deferred code patch site to be able to locate the |
| // fixed array map comparison. When debugging, we patch this |
| // comparison to always fail so that we will hit the IC call |
| // in the deferred code which will allow the debugger to |
| // break for fast case stores. |
| __ bind(deferred->patch_site()); |
| // Avoid using __ to ensure the distance from patch_site |
| // to the map address is always the same. |
| masm->movq(kScratchRegister, Factory::fixed_array_map(), |
| RelocInfo::EMBEDDED_OBJECT); |
| __ cmpq(FieldOperand(tmp.reg(), HeapObject::kMapOffset), |
| kScratchRegister); |
| deferred->Branch(not_equal); |
| |
| // Store the value. |
| SmiIndex index = |
| masm->SmiToIndex(kScratchRegister, key.reg(), kPointerSizeLog2); |
| __ movq(Operand(tmp.reg(), |
| index.reg, |
| index.scale, |
| FixedArray::kHeaderSize - kHeapObjectTag), |
| value.reg()); |
| __ IncrementCounter(&Counters::keyed_store_inline, 1); |
| |
| deferred->BindExit(); |
| |
| cgen_->frame()->Push(&receiver); |
| cgen_->frame()->Push(&key); |
| cgen_->frame()->Push(&value); |
| } else { |
| Result answer = cgen_->frame()->CallKeyedStoreIC(); |
| // Make sure that we do not have a test instruction after the |
| // call. A test instruction after the call is used to |
| // indicate that we have generated an inline version of the |
| // keyed store. |
| masm->nop(); |
| cgen_->frame()->Push(&answer); |
| } |
| break; |
| } |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| |
| void ToBooleanStub::Generate(MacroAssembler* masm) { |
| Label false_result, true_result, not_string; |
| __ movq(rax, Operand(rsp, 1 * kPointerSize)); |
| |
| // 'null' => false. |
| __ CompareRoot(rax, Heap::kNullValueRootIndex); |
| __ j(equal, &false_result); |
| |
| // Get the map and type of the heap object. |
| // We don't use CmpObjectType because we manipulate the type field. |
| __ movq(rdx, FieldOperand(rax, HeapObject::kMapOffset)); |
| __ movzxbq(rcx, FieldOperand(rdx, Map::kInstanceTypeOffset)); |
| |
| // Undetectable => false. |
| __ movzxbq(rbx, FieldOperand(rdx, Map::kBitFieldOffset)); |
| __ and_(rbx, Immediate(1 << Map::kIsUndetectable)); |
| __ j(not_zero, &false_result); |
| |
| // JavaScript object => true. |
| __ cmpq(rcx, Immediate(FIRST_JS_OBJECT_TYPE)); |
| __ j(above_equal, &true_result); |
| |
| // String value => false iff empty. |
| __ cmpq(rcx, Immediate(FIRST_NONSTRING_TYPE)); |
| __ j(above_equal, ¬_string); |
| __ and_(rcx, Immediate(kStringSizeMask)); |
| __ cmpq(rcx, Immediate(kShortStringTag)); |
| __ j(not_equal, &true_result); // Empty string is always short. |
| __ movl(rdx, FieldOperand(rax, String::kLengthOffset)); |
| __ shr(rdx, Immediate(String::kShortLengthShift)); |
| __ j(zero, &false_result); |
| __ jmp(&true_result); |
| |
| __ bind(¬_string); |
| // HeapNumber => false iff +0, -0, or NaN. |
| // These three cases set C3 when compared to zero in the FPU. |
| __ CompareRoot(rdx, Heap::kHeapNumberMapRootIndex); |
| __ j(not_equal, &true_result); |
| // TODO(x64): Don't use fp stack, use MMX registers? |
| __ fldz(); // Load zero onto fp stack |
| // Load heap-number double value onto fp stack |
| __ fld_d(FieldOperand(rax, HeapNumber::kValueOffset)); |
| __ fucompp(); // Compare and pop both values. |
| __ movq(kScratchRegister, rax); |
| __ fnstsw_ax(); // Store fp status word in ax, no checking for exceptions. |
| __ testl(rax, Immediate(0x4000)); // Test FP condition flag C3, bit 16. |
| __ movq(rax, kScratchRegister); |
| __ j(not_zero, &false_result); |
| // Fall through to |true_result|. |
| |
| // Return 1/0 for true/false in rax. |
| __ bind(&true_result); |
| __ movq(rax, Immediate(1)); |
| __ ret(1 * kPointerSize); |
| __ bind(&false_result); |
| __ xor_(rax, rax); |
| __ ret(1 * kPointerSize); |
| } |
| |
| |
| bool CodeGenerator::FoldConstantSmis(Token::Value op, int left, int right) { |
| // TODO(X64): This method is identical to the ia32 version. |
| // Either find a reason to change it, or move it somewhere where it can be |
| // shared. (Notice: It assumes that a Smi can fit in an int). |
| |
| Object* answer_object = Heap::undefined_value(); |
| switch (op) { |
| case Token::ADD: |
| if (Smi::IsValid(left + right)) { |
| answer_object = Smi::FromInt(left + right); |
| } |
| break; |
| case Token::SUB: |
| if (Smi::IsValid(left - right)) { |
| answer_object = Smi::FromInt(left - right); |
| } |
| break; |
| case Token::MUL: { |
| double answer = static_cast<double>(left) * right; |
| if (answer >= Smi::kMinValue && answer <= Smi::kMaxValue) { |
| // If the product is zero and the non-zero factor is negative, |
| // the spec requires us to return floating point negative zero. |
| if (answer != 0 || (left + right) >= 0) { |
| answer_object = Smi::FromInt(static_cast<int>(answer)); |
| } |
| } |
| } |
| break; |
| case Token::DIV: |
| case Token::MOD: |
| break; |
| case Token::BIT_OR: |
| answer_object = Smi::FromInt(left | right); |
| break; |
| case Token::BIT_AND: |
| answer_object = Smi::FromInt(left & right); |
| break; |
| case Token::BIT_XOR: |
| answer_object = Smi::FromInt(left ^ right); |
| break; |
| |
| case Token::SHL: { |
| int shift_amount = right & 0x1F; |
| if (Smi::IsValid(left << shift_amount)) { |
| answer_object = Smi::FromInt(left << shift_amount); |
| } |
| break; |
| } |
| case Token::SHR: { |
| int shift_amount = right & 0x1F; |
| unsigned int unsigned_left = left; |
| unsigned_left >>= shift_amount; |
| if (unsigned_left <= static_cast<unsigned int>(Smi::kMaxValue)) { |
| answer_object = Smi::FromInt(unsigned_left); |
| } |
| break; |
| } |
| case Token::SAR: { |
| int shift_amount = right & 0x1F; |
| unsigned int unsigned_left = left; |
| if (left < 0) { |
| // Perform arithmetic shift of a negative number by |
| // complementing number, logical shifting, complementing again. |
| unsigned_left = ~unsigned_left; |
| unsigned_left >>= shift_amount; |
| unsigned_left = ~unsigned_left; |
| } else { |
| unsigned_left >>= shift_amount; |
| } |
| ASSERT(Smi::IsValid(static_cast<int32_t>(unsigned_left))); |
| answer_object = Smi::FromInt(static_cast<int32_t>(unsigned_left)); |
| break; |
| } |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| if (answer_object == Heap::undefined_value()) { |
| return false; |
| } |
| frame_->Push(Handle<Object>(answer_object)); |
| return true; |
| } |
| |
| |
| // End of CodeGenerator implementation. |
| |
| void UnarySubStub::Generate(MacroAssembler* masm) { |
| Label slow; |
| Label done; |
| Label try_float; |
| Label special; |
| // Check whether the value is a smi. |
| __ JumpIfNotSmi(rax, &try_float); |
| |
| // Enter runtime system if the value of the smi is zero |
| // to make sure that we switch between 0 and -0. |
| // Also enter it if the value of the smi is Smi::kMinValue |
| __ testl(rax, Immediate(0x7FFFFFFE)); |
| __ j(zero, &special); |
| __ negl(rax); |
| __ jmp(&done); |
| |
| __ bind(&special); |
| // Either zero or -0x4000000, neither of which become a smi when negated. |
| __ testl(rax, rax); |
| __ j(not_zero, &slow); |
| __ Move(rax, Factory::minus_zero_value()); |
| __ jmp(&done); |
| |
| // Enter runtime system. |
| __ bind(&slow); |
| __ pop(rcx); // pop return address |
| __ push(rax); |
| __ push(rcx); // push return address |
| __ InvokeBuiltin(Builtins::UNARY_MINUS, JUMP_FUNCTION); |
| __ jmp(&done); |
| |
| // Try floating point case. |
| __ bind(&try_float); |
| __ movq(rdx, FieldOperand(rax, HeapObject::kMapOffset)); |
| __ Cmp(rdx, Factory::heap_number_map()); |
| __ j(not_equal, &slow); |
| // Operand is a float, negate its value by flipping sign bit. |
| __ movq(rdx, FieldOperand(rax, HeapNumber::kValueOffset)); |
| __ movq(kScratchRegister, Immediate(0x01)); |
| __ shl(kScratchRegister, Immediate(63)); |
| __ xor_(rdx, kScratchRegister); // Flip sign. |
| // rdx is value to store. |
| if (overwrite_) { |
| __ movq(FieldOperand(rax, HeapNumber::kValueOffset), rdx); |
| } else { |
| FloatingPointHelper::AllocateHeapNumber(masm, &slow, rbx, rcx); |
| // rcx: allocated 'empty' number |
| __ movq(FieldOperand(rcx, HeapNumber::kValueOffset), rdx); |
| __ movq(rax, rcx); |
| } |
| |
| __ bind(&done); |
| __ StubReturn(1); |
| } |
| |
| |
| void CompareStub::Generate(MacroAssembler* masm) { |
| Label call_builtin, done; |
| |
| // NOTICE! This code is only reached after a smi-fast-case check, so |
| // it is certain that at least one operand isn't a smi. |
| |
| if (cc_ == equal) { // Both strict and non-strict. |
| Label slow; // Fallthrough label. |
| // Equality is almost reflexive (everything but NaN), so start by testing |
| // for "identity and not NaN". |
| { |
| Label not_identical; |
| __ cmpq(rax, rdx); |
| __ j(not_equal, ¬_identical); |
| // Test for NaN. Sadly, we can't just compare to Factory::nan_value(), |
| // so we do the second best thing - test it ourselves. |
| |
| Label return_equal; |
| Label heap_number; |
| // If it's not a heap number, then return equal. |
| __ Cmp(FieldOperand(rdx, HeapObject::kMapOffset), |
| Factory::heap_number_map()); |
| __ j(equal, &heap_number); |
| __ bind(&return_equal); |
| __ xor_(rax, rax); |
| __ ret(0); |
| |
| __ bind(&heap_number); |
| // It is a heap number, so return non-equal if it's NaN and equal if it's |
| // not NaN. |
| // The representation of NaN values has all exponent bits (52..62) set, |
| // and not all mantissa bits (0..51) clear. |
| // Read double representation into rax. |
| __ movq(rbx, V8_UINT64_C(0x7ff0000000000000), RelocInfo::NONE); |
| __ movq(rax, FieldOperand(rdx, HeapNumber::kValueOffset)); |
| // Test that exponent bits are all set. |
| __ or_(rbx, rax); |
| __ cmpq(rbx, rax); |
| __ j(not_equal, &return_equal); |
| // Shift out flag and all exponent bits, retaining only mantissa. |
| __ shl(rax, Immediate(12)); |
| // If all bits in the mantissa are zero the number is Infinity, and |
| // we return zero. Otherwise it is a NaN, and we return non-zero. |
| // We cannot just return rax because only eax is tested on return. |
| __ setcc(not_zero, rax); |
| __ ret(0); |
| |
| __ bind(¬_identical); |
| } |
| |
| // If we're doing a strict equality comparison, we don't have to do |
| // type conversion, so we generate code to do fast comparison for objects |
| // and oddballs. Non-smi numbers and strings still go through the usual |
| // slow-case code. |
| if (strict_) { |
| // If either is a Smi (we know that not both are), then they can only |
| // be equal if the other is a HeapNumber. If so, use the slow case. |
| { |
| Label not_smis; |
| __ SelectNonSmi(rbx, rax, rdx, ¬_smis); |
| |
| // Check if the non-smi operand is a heap number. |
| __ Cmp(FieldOperand(rbx, HeapObject::kMapOffset), |
| Factory::heap_number_map()); |
| // If heap number, handle it in the slow case. |
| __ j(equal, &slow); |
| // Return non-equal. ebx (the lower half of rbx) is not zero. |
| __ movq(rax, rbx); |
| __ ret(0); |
| |
| __ bind(¬_smis); |
| } |
| |
| // If either operand is a JSObject or an oddball value, then they are not |
| // equal since their pointers are different |
| // There is no test for undetectability in strict equality. |
| |
| // If the first object is a JS object, we have done pointer comparison. |
| ASSERT(LAST_TYPE == JS_FUNCTION_TYPE); |
| Label first_non_object; |
| __ CmpObjectType(rax, FIRST_JS_OBJECT_TYPE, rcx); |
| __ j(below, &first_non_object); |
| // Return non-zero (eax (not rax) is not zero) |
| Label return_not_equal; |
| ASSERT(kHeapObjectTag != 0); |
| __ bind(&return_not_equal); |
| __ ret(0); |
| |
| __ bind(&first_non_object); |
| // Check for oddballs: true, false, null, undefined. |
| __ CmpInstanceType(rcx, ODDBALL_TYPE); |
| __ j(equal, &return_not_equal); |
| |
| __ CmpObjectType(rdx, FIRST_JS_OBJECT_TYPE, rcx); |
| __ j(above_equal, &return_not_equal); |
| |
| // Check for oddballs: true, false, null, undefined. |
| __ CmpInstanceType(rcx, ODDBALL_TYPE); |
| __ j(equal, &return_not_equal); |
| |
| // Fall through to the general case. |
| } |
| __ bind(&slow); |
| } |
| |
| // Push arguments below the return address to prepare jump to builtin. |
| __ pop(rcx); |
| __ push(rax); |
| __ push(rdx); |
| __ push(rcx); |
| |
| // Inlined floating point compare. |
| // Call builtin if operands are not floating point or smi. |
| Label check_for_symbols; |
| // Push arguments on stack, for helper functions. |
| FloatingPointHelper::CheckFloatOperands(masm, &check_for_symbols); |
| FloatingPointHelper::LoadFloatOperands(masm, rax, rdx); |
| __ FCmp(); |
| |
| // Jump to builtin for NaN. |
| __ j(parity_even, &call_builtin); |
| |
| // TODO(1243847): Use cmov below once CpuFeatures are properly hooked up. |
| Label below_lbl, above_lbl; |
| // use rdx, rax to convert unsigned to signed comparison |
| __ j(below, &below_lbl); |
| __ j(above, &above_lbl); |
| |
| __ xor_(rax, rax); // equal |
| __ ret(2 * kPointerSize); |
| |
| __ bind(&below_lbl); |
| __ movq(rax, Immediate(-1)); |
| __ ret(2 * kPointerSize); |
| |
| __ bind(&above_lbl); |
| __ movq(rax, Immediate(1)); |
| __ ret(2 * kPointerSize); // rax, rdx were pushed |
| |
| // Fast negative check for symbol-to-symbol equality. |
| __ bind(&check_for_symbols); |
| if (cc_ == equal) { |
| BranchIfNonSymbol(masm, &call_builtin, rax, kScratchRegister); |
| BranchIfNonSymbol(masm, &call_builtin, rdx, kScratchRegister); |
| |
| // We've already checked for object identity, so if both operands |
| // are symbols they aren't equal. Register eax (not rax) already holds a |
| // non-zero value, which indicates not equal, so just return. |
| __ ret(2 * kPointerSize); |
| } |
| |
| __ bind(&call_builtin); |
| // must swap argument order |
| __ pop(rcx); |
| __ pop(rdx); |
| __ pop(rax); |
| __ push(rdx); |
| __ push(rax); |
| |
| // Figure out which native to call and setup the arguments. |
| Builtins::JavaScript builtin; |
| if (cc_ == equal) { |
| builtin = strict_ ? Builtins::STRICT_EQUALS : Builtins::EQUALS; |
| } else { |
| builtin = Builtins::COMPARE; |
| int ncr; // NaN compare result |
| if (cc_ == less || cc_ == less_equal) { |
| ncr = GREATER; |
| } else { |
| ASSERT(cc_ == greater || cc_ == greater_equal); // remaining cases |
| ncr = LESS; |
| } |
| __ push(Immediate(Smi::FromInt(ncr))); |
| } |
| |
| // Restore return address on the stack. |
| __ push(rcx); |
| |
| // Call the native; it returns -1 (less), 0 (equal), or 1 (greater) |
| // tagged as a small integer. |
| __ InvokeBuiltin(builtin, JUMP_FUNCTION); |
| } |
| |
| |
| void CompareStub::BranchIfNonSymbol(MacroAssembler* masm, |
| Label* label, |
| Register object, |
| Register scratch) { |
| __ JumpIfSmi(object, label); |
| __ movq(scratch, FieldOperand(object, HeapObject::kMapOffset)); |
| __ movzxbq(scratch, |
| FieldOperand(scratch, Map::kInstanceTypeOffset)); |
| __ and_(scratch, Immediate(kIsSymbolMask | kIsNotStringMask)); |
| __ cmpb(scratch, Immediate(kSymbolTag | kStringTag)); |
| __ j(not_equal, label); |
| } |
| |
| |
| // Call the function just below TOS on the stack with the given |
| // arguments. The receiver is the TOS. |
| void CodeGenerator::CallWithArguments(ZoneList<Expression*>* args, |
| int position) { |
| // Push the arguments ("left-to-right") on the stack. |
| int arg_count = args->length(); |
| for (int i = 0; i < arg_count; i++) { |
| Load(args->at(i)); |
| } |
| |
| // Record the position for debugging purposes. |
| CodeForSourcePosition(position); |
| |
| // Use the shared code stub to call the function. |
| InLoopFlag in_loop = loop_nesting() > 0 ? IN_LOOP : NOT_IN_LOOP; |
| CallFunctionStub call_function(arg_count, in_loop); |
| Result answer = frame_->CallStub(&call_function, arg_count + 1); |
| // Restore context and replace function on the stack with the |
| // result of the stub invocation. |
| frame_->RestoreContextRegister(); |
| frame_->SetElementAt(0, &answer); |
| } |
| |
| |
| void InstanceofStub::Generate(MacroAssembler* masm) { |
| // Implements "value instanceof function" operator. |
| // Expected input state: |
| // rsp[0] : return address |
| // rsp[1] : function pointer |
| // rsp[2] : value |
| |
| // Get the object - go slow case if it's a smi. |
| Label slow; |
| __ movq(rax, Operand(rsp, 2 * kPointerSize)); |
| __ JumpIfSmi(rax, &slow); |
| |
| // Check that the left hand is a JS object. Leave its map in rax. |
| __ CmpObjectType(rax, FIRST_JS_OBJECT_TYPE, rax); |
| __ j(below, &slow); |
| __ CmpInstanceType(rax, LAST_JS_OBJECT_TYPE); |
| __ j(above, &slow); |
| |
| // Get the prototype of the function. |
| __ movq(rdx, Operand(rsp, 1 * kPointerSize)); |
| __ TryGetFunctionPrototype(rdx, rbx, &slow); |
| |
| // Check that the function prototype is a JS object. |
| __ JumpIfSmi(rbx, &slow); |
| __ CmpObjectType(rbx, FIRST_JS_OBJECT_TYPE, kScratchRegister); |
| __ j(below, &slow); |
| __ CmpInstanceType(kScratchRegister, LAST_JS_OBJECT_TYPE); |
| __ j(above, &slow); |
| |
| // Register mapping: rax is object map and rbx is function prototype. |
| __ movq(rcx, FieldOperand(rax, Map::kPrototypeOffset)); |
| |
| // Loop through the prototype chain looking for the function prototype. |
| Label loop, is_instance, is_not_instance; |
| __ LoadRoot(kScratchRegister, Heap::kNullValueRootIndex); |
| __ bind(&loop); |
| __ cmpq(rcx, rbx); |
| __ j(equal, &is_instance); |
| __ cmpq(rcx, kScratchRegister); |
| __ j(equal, &is_not_instance); |
| __ movq(rcx, FieldOperand(rcx, HeapObject::kMapOffset)); |
| __ movq(rcx, FieldOperand(rcx, Map::kPrototypeOffset)); |
| __ jmp(&loop); |
| |
| __ bind(&is_instance); |
| __ xor_(rax, rax); |
| __ ret(2 * kPointerSize); |
| |
| __ bind(&is_not_instance); |
| __ movq(rax, Immediate(Smi::FromInt(1))); |
| __ ret(2 * kPointerSize); |
| |
| // Slow-case: Go through the JavaScript implementation. |
| __ bind(&slow); |
| __ InvokeBuiltin(Builtins::INSTANCE_OF, JUMP_FUNCTION); |
| } |
| |
| |
| void ArgumentsAccessStub::GenerateNewObject(MacroAssembler* masm) { |
| // The displacement is used for skipping the return address and the |
| // frame pointer on the stack. It is the offset of the last |
| // parameter (if any) relative to the frame pointer. |
| static const int kDisplacement = 2 * kPointerSize; |
| |
| // Check if the calling frame is an arguments adaptor frame. |
| Label runtime; |
| __ movq(rdx, Operand(rbp, StandardFrameConstants::kCallerFPOffset)); |
| __ movq(rcx, Operand(rdx, StandardFrameConstants::kContextOffset)); |
| __ cmpq(rcx, Immediate(Smi::FromInt(StackFrame::ARGUMENTS_ADAPTOR))); |
| __ j(not_equal, &runtime); |
| // Value in rcx is Smi encoded. |
| |
| // Patch the arguments.length and the parameters pointer. |
| __ movq(rcx, Operand(rdx, ArgumentsAdaptorFrameConstants::kLengthOffset)); |
| __ movq(Operand(rsp, 1 * kPointerSize), rcx); |
| SmiIndex index = masm->SmiToIndex(rcx, rcx, kPointerSizeLog2); |
| __ lea(rdx, Operand(rdx, index.reg, index.scale, kDisplacement)); |
| __ movq(Operand(rsp, 2 * kPointerSize), rdx); |
| |
| // Do the runtime call to allocate the arguments object. |
| __ bind(&runtime); |
| Runtime::Function* f = Runtime::FunctionForId(Runtime::kNewArgumentsFast); |
| __ TailCallRuntime(ExternalReference(f), 3, f->result_size); |
| } |
| |
| |
| void ArgumentsAccessStub::GenerateReadElement(MacroAssembler* masm) { |
| // The key is in rdx and the parameter count is in rax. |
| |
| // The displacement is used for skipping the frame pointer on the |
| // stack. It is the offset of the last parameter (if any) relative |
| // to the frame pointer. |
| static const int kDisplacement = 1 * kPointerSize; |
| |
| // Check that the key is a smi. |
| Label slow; |
| __ JumpIfNotSmi(rdx, &slow); |
| |
| // Check if the calling frame is an arguments adaptor frame. |
| Label adaptor; |
| __ movq(rbx, Operand(rbp, StandardFrameConstants::kCallerFPOffset)); |
| __ movq(rcx, Operand(rbx, StandardFrameConstants::kContextOffset)); |
| __ cmpq(rcx, Immediate(Smi::FromInt(StackFrame::ARGUMENTS_ADAPTOR))); |
| __ j(equal, &adaptor); |
| |
| // Check index against formal parameters count limit passed in |
| // through register rax. Use unsigned comparison to get negative |
| // check for free. |
| __ cmpq(rdx, rax); |
| __ j(above_equal, &slow); |
| |
| // Read the argument from the stack and return it. |
| SmiIndex index = masm->SmiToIndex(rax, rax, kPointerSizeLog2); |
| __ lea(rbx, Operand(rbp, index.reg, index.scale, 0)); |
| index = masm->SmiToNegativeIndex(rdx, rdx, kPointerSizeLog2); |
| __ movq(rax, Operand(rbx, index.reg, index.scale, kDisplacement)); |
| __ Ret(); |
| |
| // Arguments adaptor case: Check index against actual arguments |
| // limit found in the arguments adaptor frame. Use unsigned |
| // comparison to get negative check for free. |
| __ bind(&adaptor); |
| __ movq(rcx, Operand(rbx, ArgumentsAdaptorFrameConstants::kLengthOffset)); |
| __ cmpq(rdx, rcx); |
| __ j(above_equal, &slow); |
| |
| // Read the argument from the stack and return it. |
| index = masm->SmiToIndex(rax, rcx, kPointerSizeLog2); |
| __ lea(rbx, Operand(rbx, index.reg, index.scale, 0)); |
| index = masm->SmiToNegativeIndex(rdx, rdx, kPointerSizeLog2); |
| __ movq(rax, Operand(rbx, index.reg, index.scale, kDisplacement)); |
| __ Ret(); |
| |
| // Slow-case: Handle non-smi or out-of-bounds access to arguments |
| // by calling the runtime system. |
| __ bind(&slow); |
| __ pop(rbx); // Return address. |
| __ push(rdx); |
| __ push(rbx); |
| Runtime::Function* f = |
| Runtime::FunctionForId(Runtime::kGetArgumentsProperty); |
| __ TailCallRuntime(ExternalReference(f), 1, f->result_size); |
| } |
| |
| |
| void ArgumentsAccessStub::GenerateReadLength(MacroAssembler* masm) { |
| // Check if the calling frame is an arguments adaptor frame. |
| Label adaptor; |
| __ movq(rdx, Operand(rbp, StandardFrameConstants::kCallerFPOffset)); |
| __ movq(rcx, Operand(rdx, StandardFrameConstants::kContextOffset)); |
| __ cmpq(rcx, Immediate(Smi::FromInt(StackFrame::ARGUMENTS_ADAPTOR))); |
| __ j(equal, &adaptor); |
| |
| // Nothing to do: The formal number of parameters has already been |
| // passed in register rax by calling function. Just return it. |
| __ ret(0); |
| |
| // Arguments adaptor case: Read the arguments length from the |
| // adaptor frame and return it. |
| __ bind(&adaptor); |
| __ movq(rax, Operand(rdx, ArgumentsAdaptorFrameConstants::kLengthOffset)); |
| __ ret(0); |
| } |
| |
| |
| int CEntryStub::MinorKey() { |
| ASSERT(result_size_ <= 2); |
| #ifdef _WIN64 |
| // Simple results returned in rax (using default code). |
| // Complex results must be written to address passed as first argument. |
| // Use even numbers for minor keys, reserving the odd numbers for |
| // CEntryDebugBreakStub. |
| return (result_size_ < 2) ? 0 : result_size_ * 2; |
| #else |
| // Single results returned in rax (both AMD64 and Win64 calling conventions) |
| // and a struct of two pointers in rax+rdx (AMD64 calling convention only) |
| // by default. |
| return 0; |
| #endif |
| } |
| |
| |
| void CEntryStub::GenerateThrowTOS(MacroAssembler* masm) { |
| // Check that stack should contain next handler, frame pointer, state and |
| // return address in that order. |
| ASSERT_EQ(StackHandlerConstants::kFPOffset + kPointerSize, |
| StackHandlerConstants::kStateOffset); |
| ASSERT_EQ(StackHandlerConstants::kStateOffset + kPointerSize, |
| StackHandlerConstants::kPCOffset); |
| |
| ExternalReference handler_address(Top::k_handler_address); |
| __ movq(kScratchRegister, handler_address); |
| __ movq(rsp, Operand(kScratchRegister, 0)); |
| // get next in chain |
| __ pop(rcx); |
| __ movq(Operand(kScratchRegister, 0), rcx); |
| __ pop(rbp); // pop frame pointer |
| __ pop(rdx); // remove state |
| |
| // Before returning we restore the context from the frame pointer if not NULL. |
| // The frame pointer is NULL in the exception handler of a JS entry frame. |
| __ xor_(rsi, rsi); // tentatively set context pointer to NULL |
| Label skip; |
| __ cmpq(rbp, Immediate(0)); |
| __ j(equal, &skip); |
| __ movq(rsi, Operand(rbp, StandardFrameConstants::kContextOffset)); |
| __ bind(&skip); |
| __ ret(0); |
| } |
| |
| |
| void CEntryStub::GenerateCore(MacroAssembler* masm, |
| Label* throw_normal_exception, |
| Label* throw_termination_exception, |
| Label* throw_out_of_memory_exception, |
| StackFrame::Type frame_type, |
| bool do_gc, |
| bool always_allocate_scope) { |
| // rax: result parameter for PerformGC, if any. |
| // rbx: pointer to C function (C callee-saved). |
| // rbp: frame pointer (restored after C call). |
| // rsp: stack pointer (restored after C call). |
| // r14: number of arguments including receiver (C callee-saved). |
| // r15: pointer to the first argument (C callee-saved). |
| // This pointer is reused in LeaveExitFrame(), so it is stored in a |
| // callee-saved register. |
| |
| if (do_gc) { |
| // Pass failure code returned from last attempt as first argument to GC. |
| #ifdef _WIN64 |
| __ movq(rcx, rax); |
| #else // ! defined(_WIN64) |
| __ movq(rdi, rax); |
| #endif |
| __ movq(kScratchRegister, |
| FUNCTION_ADDR(Runtime::PerformGC), |
| RelocInfo::RUNTIME_ENTRY); |
| __ call(kScratchRegister); |
| } |
| |
| ExternalReference scope_depth = |
| ExternalReference::heap_always_allocate_scope_depth(); |
| if (always_allocate_scope) { |
| __ movq(kScratchRegister, scope_depth); |
| __ incl(Operand(kScratchRegister, 0)); |
| } |
| |
| // Call C function. |
| #ifdef _WIN64 |
| // Windows 64-bit ABI passes arguments in rcx, rdx, r8, r9 |
| // Store Arguments object on stack, below the 4 WIN64 ABI parameter slots. |
| __ movq(Operand(rsp, 4 * kPointerSize), r14); // argc. |
| __ movq(Operand(rsp, 5 * kPointerSize), r15); // argv. |
| if (result_size_ < 2) { |
| // Pass a pointer to the Arguments object as the first argument. |
| // Return result in single register (rax). |
| __ lea(rcx, Operand(rsp, 4 * kPointerSize)); |
| } else { |
| ASSERT_EQ(2, result_size_); |
| // Pass a pointer to the result location as the first argument. |
| __ lea(rcx, Operand(rsp, 6 * kPointerSize)); |
| // Pass a pointer to the Arguments object as the second argument. |
| __ lea(rdx, Operand(rsp, 4 * kPointerSize)); |
| } |
| |
| #else // ! defined(_WIN64) |
| // GCC passes arguments in rdi, rsi, rdx, rcx, r8, r9. |
| __ movq(rdi, r14); // argc. |
| __ movq(rsi, r15); // argv. |
| #endif |
| __ call(rbx); |
| // Result is in rax - do not destroy this register! |
| |
| if (always_allocate_scope) { |
| __ movq(kScratchRegister, scope_depth); |
| __ decl(Operand(kScratchRegister, 0)); |
| } |
| |
| // Check for failure result. |
| Label failure_returned; |
| ASSERT(((kFailureTag + 1) & kFailureTagMask) == 0); |
| __ lea(rcx, Operand(rax, 1)); |
| // Lower 2 bits of rcx are 0 iff rax has failure tag. |
| __ testl(rcx, Immediate(kFailureTagMask)); |
| __ j(zero, &failure_returned); |
| |
| // Exit the JavaScript to C++ exit frame. |
| __ LeaveExitFrame(frame_type, result_size_); |
| __ ret(0); |
| |
| // Handling of failure. |
| __ bind(&failure_returned); |
| |
| Label retry; |
| // If the returned exception is RETRY_AFTER_GC continue at retry label |
| ASSERT(Failure::RETRY_AFTER_GC == 0); |
| __ testl(rax, Immediate(((1 << kFailureTypeTagSize) - 1) << kFailureTagSize)); |
| __ j(zero, &retry); |
| |
| // Special handling of out of memory exceptions. |
| __ movq(kScratchRegister, Failure::OutOfMemoryException(), RelocInfo::NONE); |
| __ cmpq(rax, kScratchRegister); |
| __ j(equal, throw_out_of_memory_exception); |
| |
| // Retrieve the pending exception and clear the variable. |
| ExternalReference pending_exception_address(Top::k_pending_exception_address); |
| __ movq(kScratchRegister, pending_exception_address); |
| __ movq(rax, Operand(kScratchRegister, 0)); |
| __ movq(rdx, ExternalReference::the_hole_value_location()); |
| __ movq(rdx, Operand(rdx, 0)); |
| __ movq(Operand(kScratchRegister, 0), rdx); |
| |
| // Special handling of termination exceptions which are uncatchable |
| // by javascript code. |
| __ CompareRoot(rax, Heap::kTerminationExceptionRootIndex); |
| __ j(equal, throw_termination_exception); |
| |
| // Handle normal exception. |
| __ jmp(throw_normal_exception); |
| |
| // Retry. |
| __ bind(&retry); |
| } |
| |
| |
| void CEntryStub::GenerateThrowUncatchable(MacroAssembler* masm, |
| UncatchableExceptionType type) { |
| // Fetch top stack handler. |
| ExternalReference handler_address(Top::k_handler_address); |
| __ movq(kScratchRegister, handler_address); |
| __ movq(rsp, Operand(kScratchRegister, 0)); |
| |
| // Unwind the handlers until the ENTRY handler is found. |
| Label loop, done; |
| __ bind(&loop); |
| // Load the type of the current stack handler. |
| const int kStateOffset = StackHandlerConstants::kStateOffset; |
| __ cmpq(Operand(rsp, kStateOffset), Immediate(StackHandler::ENTRY)); |
| __ j(equal, &done); |
| // Fetch the next handler in the list. |
| const int kNextOffset = StackHandlerConstants::kNextOffset; |
| __ movq(rsp, Operand(rsp, kNextOffset)); |
| __ jmp(&loop); |
| __ bind(&done); |
| |
| // Set the top handler address to next handler past the current ENTRY handler. |
| __ movq(kScratchRegister, handler_address); |
| __ pop(Operand(kScratchRegister, 0)); |
| |
| if (type == OUT_OF_MEMORY) { |
| // Set external caught exception to false. |
| ExternalReference external_caught(Top::k_external_caught_exception_address); |
| __ movq(rax, Immediate(false)); |
| __ store_rax(external_caught); |
| |
| // Set pending exception and rax to out of memory exception. |
| ExternalReference pending_exception(Top::k_pending_exception_address); |
| __ movq(rax, Failure::OutOfMemoryException(), RelocInfo::NONE); |
| __ store_rax(pending_exception); |
| } |
| |
| // Clear the context pointer. |
| __ xor_(rsi, rsi); |
| |
| // Restore registers from handler. |
| ASSERT_EQ(StackHandlerConstants::kNextOffset + kPointerSize, |
| StackHandlerConstants::kFPOffset); |
| __ pop(rbp); // FP |
| ASSERT_EQ(StackHandlerConstants::kFPOffset + kPointerSize, |
| StackHandlerConstants::kStateOffset); |
| __ pop(rdx); // State |
| |
| ASSERT_EQ(StackHandlerConstants::kStateOffset + kPointerSize, |
| StackHandlerConstants::kPCOffset); |
| __ ret(0); |
| } |
| |
| |
| void CallFunctionStub::Generate(MacroAssembler* masm) { |
| Label slow; |
| |
| // Get the function to call from the stack. |
| // +2 ~ receiver, return address |
| __ movq(rdi, Operand(rsp, (argc_ + 2) * kPointerSize)); |
| |
| // Check that the function really is a JavaScript function. |
| __ JumpIfSmi(rdi, &slow); |
| // Goto slow case if we do not have a function. |
| __ CmpObjectType(rdi, JS_FUNCTION_TYPE, rcx); |
| __ j(not_equal, &slow); |
| |
| // Fast-case: Just invoke the function. |
| ParameterCount actual(argc_); |
| __ InvokeFunction(rdi, actual, JUMP_FUNCTION); |
| |
| // Slow-case: Non-function called. |
| __ bind(&slow); |
| __ Set(rax, argc_); |
| __ Set(rbx, 0); |
| __ GetBuiltinEntry(rdx, Builtins::CALL_NON_FUNCTION); |
| Handle<Code> adaptor(Builtins::builtin(Builtins::ArgumentsAdaptorTrampoline)); |
| __ Jump(adaptor, RelocInfo::CODE_TARGET); |
| } |
| |
| |
| void CEntryStub::GenerateBody(MacroAssembler* masm, bool is_debug_break) { |
| // rax: number of arguments including receiver |
| // rbx: pointer to C function (C callee-saved) |
| // rbp: frame pointer of calling JS frame (restored after C call) |
| // rsp: stack pointer (restored after C call) |
| // rsi: current context (restored) |
| |
| // NOTE: Invocations of builtins may return failure objects |
| // instead of a proper result. The builtin entry handles |
| // this by performing a garbage collection and retrying the |
| // builtin once. |
| |
| StackFrame::Type frame_type = is_debug_break ? |
| StackFrame::EXIT_DEBUG : |
| StackFrame::EXIT; |
| |
| // Enter the exit frame that transitions from JavaScript to C++. |
| __ EnterExitFrame(frame_type, result_size_); |
| |
| // rax: Holds the context at this point, but should not be used. |
| // On entry to code generated by GenerateCore, it must hold |
| // a failure result if the collect_garbage argument to GenerateCore |
| // is true. This failure result can be the result of code |
| // generated by a previous call to GenerateCore. The value |
| // of rax is then passed to Runtime::PerformGC. |
| // rbx: pointer to builtin function (C callee-saved). |
| // rbp: frame pointer of exit frame (restored after C call). |
| // rsp: stack pointer (restored after C call). |
| // r14: number of arguments including receiver (C callee-saved). |
| // r15: argv pointer (C callee-saved). |
| |
| Label throw_normal_exception; |
| Label throw_termination_exception; |
| Label throw_out_of_memory_exception; |
| |
| // Call into the runtime system. |
| GenerateCore(masm, |
| &throw_normal_exception, |
| &throw_termination_exception, |
| &throw_out_of_memory_exception, |
| frame_type, |
| false, |
| false); |
| |
| // Do space-specific GC and retry runtime call. |
| GenerateCore(masm, |
| &throw_normal_exception, |
| &throw_termination_exception, |
| &throw_out_of_memory_exception, |
| frame_type, |
| true, |
| false); |
| |
| // Do full GC and retry runtime call one final time. |
| Failure* failure = Failure::InternalError(); |
| __ movq(rax, failure, RelocInfo::NONE); |
| GenerateCore(masm, |
| &throw_normal_exception, |
| &throw_termination_exception, |
| &throw_out_of_memory_exception, |
| frame_type, |
| true, |
| true); |
| |
| __ bind(&throw_out_of_memory_exception); |
| GenerateThrowUncatchable(masm, OUT_OF_MEMORY); |
| |
| __ bind(&throw_termination_exception); |
| GenerateThrowUncatchable(masm, TERMINATION); |
| |
| __ bind(&throw_normal_exception); |
| GenerateThrowTOS(masm); |
| } |
| |
| |
| void JSEntryStub::GenerateBody(MacroAssembler* masm, bool is_construct) { |
| Label invoke, exit; |
| #ifdef ENABLE_LOGGING_AND_PROFILING |
| Label not_outermost_js, not_outermost_js_2; |
| #endif |
| |
| // Setup frame. |
| __ push(rbp); |
| __ movq(rbp, rsp); |
| |
| // Push the stack frame type marker twice. |
| int marker = is_construct ? StackFrame::ENTRY_CONSTRUCT : StackFrame::ENTRY; |
| __ push(Immediate(Smi::FromInt(marker))); // context slot |
| __ push(Immediate(Smi::FromInt(marker))); // function slot |
| // Save callee-saved registers (X64 calling conventions). |
| __ push(r12); |
| __ push(r13); |
| __ push(r14); |
| __ push(r15); |
| __ push(rdi); |
| __ push(rsi); |
| __ push(rbx); |
| // TODO(X64): Push XMM6-XMM15 (low 64 bits) as well, or make them |
| // callee-save in JS code as well. |
| |
| // Save copies of the top frame descriptor on the stack. |
| ExternalReference c_entry_fp(Top::k_c_entry_fp_address); |
| __ load_rax(c_entry_fp); |
| __ push(rax); |
| |
| #ifdef ENABLE_LOGGING_AND_PROFILING |
| // If this is the outermost JS call, set js_entry_sp value. |
| ExternalReference js_entry_sp(Top::k_js_entry_sp_address); |
| __ load_rax(js_entry_sp); |
| __ testq(rax, rax); |
| __ j(not_zero, ¬_outermost_js); |
| __ movq(rax, rbp); |
| __ store_rax(js_entry_sp); |
| __ bind(¬_outermost_js); |
| #endif |
| |
| // Call a faked try-block that does the invoke. |
| __ call(&invoke); |
| |
| // Caught exception: Store result (exception) in the pending |
| // exception field in the JSEnv and return a failure sentinel. |
| ExternalReference pending_exception(Top::k_pending_exception_address); |
| __ store_rax(pending_exception); |
| __ movq(rax, Failure::Exception(), RelocInfo::NONE); |
| __ jmp(&exit); |
| |
| // Invoke: Link this frame into the handler chain. |
| __ bind(&invoke); |
| __ PushTryHandler(IN_JS_ENTRY, JS_ENTRY_HANDLER); |
| |
| // Clear any pending exceptions. |
| __ load_rax(ExternalReference::the_hole_value_location()); |
| __ store_rax(pending_exception); |
| |
| // Fake a receiver (NULL). |
| __ push(Immediate(0)); // receiver |
| |
| // Invoke the function by calling through JS entry trampoline |
| // builtin and pop the faked function when we return. We load the address |
| // from an external reference instead of inlining the call target address |
| // directly in the code, because the builtin stubs may not have been |
| // generated yet at the time this code is generated. |
| if (is_construct) { |
| ExternalReference construct_entry(Builtins::JSConstructEntryTrampoline); |
| __ load_rax(construct_entry); |
| } else { |
| ExternalReference entry(Builtins::JSEntryTrampoline); |
| __ load_rax(entry); |
| } |
| __ lea(kScratchRegister, FieldOperand(rax, Code::kHeaderSize)); |
| __ call(kScratchRegister); |
| |
| // Unlink this frame from the handler chain. |
| __ movq(kScratchRegister, ExternalReference(Top::k_handler_address)); |
| __ pop(Operand(kScratchRegister, 0)); |
| // Pop next_sp. |
| __ addq(rsp, Immediate(StackHandlerConstants::kSize - kPointerSize)); |
| |
| #ifdef ENABLE_LOGGING_AND_PROFILING |
| // If current EBP value is the same as js_entry_sp value, it means that |
| // the current function is the outermost. |
| __ movq(kScratchRegister, js_entry_sp); |
| __ cmpq(rbp, Operand(kScratchRegister, 0)); |
| __ j(not_equal, ¬_outermost_js_2); |
| __ movq(Operand(kScratchRegister, 0), Immediate(0)); |
| __ bind(¬_outermost_js_2); |
| #endif |
| |
| // Restore the top frame descriptor from the stack. |
| __ bind(&exit); |
| __ movq(kScratchRegister, ExternalReference(Top::k_c_entry_fp_address)); |
| __ pop(Operand(kScratchRegister, 0)); |
| |
| // Restore callee-saved registers (X64 conventions). |
| __ pop(rbx); |
| __ pop(rsi); |
| __ pop(rdi); |
| __ pop(r15); |
| __ pop(r14); |
| __ pop(r13); |
| __ pop(r12); |
| __ addq(rsp, Immediate(2 * kPointerSize)); // remove markers |
| |
| // Restore frame pointer and return. |
| __ pop(rbp); |
| __ ret(0); |
| } |
| |
| |
| // ----------------------------------------------------------------------------- |
| // Implementation of stubs. |
| |
| // Stub classes have public member named masm, not masm_. |
| |
| void StackCheckStub::Generate(MacroAssembler* masm) { |
| // Because builtins always remove the receiver from the stack, we |
| // have to fake one to avoid underflowing the stack. The receiver |
| // must be inserted below the return address on the stack so we |
| // temporarily store that in a register. |
| __ pop(rax); |
| __ push(Immediate(Smi::FromInt(0))); |
| __ push(rax); |
| |
| // Do tail-call to runtime routine. |
| Runtime::Function* f = Runtime::FunctionForId(Runtime::kStackGuard); |
| __ TailCallRuntime(ExternalReference(f), 1, f->result_size); |
| } |
| |
| |
| void FloatingPointHelper::AllocateHeapNumber(MacroAssembler* masm, |
| Label* need_gc, |
| Register scratch, |
| Register result) { |
| // Allocate heap number in new space. |
| __ AllocateObjectInNewSpace(HeapNumber::kSize, |
| result, |
| scratch, |
| no_reg, |
| need_gc, |
| TAG_OBJECT); |
| |
| // Set the map and tag the result. |
| __ LoadRoot(kScratchRegister, Heap::kHeapNumberMapRootIndex); |
| __ movq(FieldOperand(result, HeapObject::kMapOffset), kScratchRegister); |
| } |
| |
| |
| void FloatingPointHelper::LoadFloatOperand(MacroAssembler* masm, |
| Register number) { |
| Label load_smi, done; |
| |
| __ JumpIfSmi(number, &load_smi); |
| __ fld_d(FieldOperand(number, HeapNumber::kValueOffset)); |
| __ jmp(&done); |
| |
| __ bind(&load_smi); |
| __ SmiToInteger32(number, number); |
| __ push(number); |
| __ fild_s(Operand(rsp, 0)); |
| __ pop(number); |
| |
| __ bind(&done); |
| } |
| |
| |
| void FloatingPointHelper::LoadFloatOperand(MacroAssembler* masm, |
| Register src, |
| XMMRegister dst) { |
| Label load_smi, done; |
| |
| __ JumpIfSmi(src, &load_smi); |
| __ movsd(dst, FieldOperand(src, HeapNumber::kValueOffset)); |
| __ jmp(&done); |
| |
| __ bind(&load_smi); |
| __ SmiToInteger32(src, src); |
| __ cvtlsi2sd(dst, src); |
| |
| __ bind(&done); |
| } |
| |
| |
| void FloatingPointHelper::LoadFloatOperands(MacroAssembler* masm, |
| XMMRegister dst1, |
| XMMRegister dst2) { |
| __ movq(kScratchRegister, Operand(rsp, 2 * kPointerSize)); |
| LoadFloatOperand(masm, kScratchRegister, dst1); |
| __ movq(kScratchRegister, Operand(rsp, 1 * kPointerSize)); |
| LoadFloatOperand(masm, kScratchRegister, dst2); |
| } |
| |
| |
| void FloatingPointHelper::LoadInt32Operand(MacroAssembler* masm, |
| const Operand& src, |
| Register dst) { |
| // TODO(X64): Convert number operands to int32 values. |
| // Don't convert a Smi to a double first. |
| UNIMPLEMENTED(); |
| } |
| |
| |
| void FloatingPointHelper::LoadFloatOperands(MacroAssembler* masm) { |
| Label load_smi_1, load_smi_2, done_load_1, done; |
| __ movq(kScratchRegister, Operand(rsp, 2 * kPointerSize)); |
| __ JumpIfSmi(kScratchRegister, &load_smi_1); |
| __ fld_d(FieldOperand(kScratchRegister, HeapNumber::kValueOffset)); |
| __ bind(&done_load_1); |
| |
| __ movq(kScratchRegister, Operand(rsp, 1 * kPointerSize)); |
| __ JumpIfSmi(kScratchRegister, &load_smi_2); |
| __ fld_d(FieldOperand(kScratchRegister, HeapNumber::kValueOffset)); |
| __ jmp(&done); |
| |
| __ bind(&load_smi_1); |
| __ SmiToInteger32(kScratchRegister, kScratchRegister); |
| __ push(kScratchRegister); |
| __ fild_s(Operand(rsp, 0)); |
| __ pop(kScratchRegister); |
| __ jmp(&done_load_1); |
| |
| __ bind(&load_smi_2); |
| __ SmiToInteger32(kScratchRegister, kScratchRegister); |
| __ push(kScratchRegister); |
| __ fild_s(Operand(rsp, 0)); |
| __ pop(kScratchRegister); |
| |
| __ bind(&done); |
| } |
| |
| |
| void FloatingPointHelper::LoadFloatOperands(MacroAssembler* masm, |
| Register lhs, |
| Register rhs) { |
| Label load_smi_lhs, load_smi_rhs, done_load_lhs, done; |
| __ JumpIfSmi(lhs, &load_smi_lhs); |
| __ fld_d(FieldOperand(lhs, HeapNumber::kValueOffset)); |
| __ bind(&done_load_lhs); |
| |
| __ JumpIfSmi(rhs, &load_smi_rhs); |
| __ fld_d(FieldOperand(rhs, HeapNumber::kValueOffset)); |
| __ jmp(&done); |
| |
| __ bind(&load_smi_lhs); |
| __ SmiToInteger64(kScratchRegister, lhs); |
| __ push(kScratchRegister); |
| __ fild_d(Operand(rsp, 0)); |
| __ pop(kScratchRegister); |
| __ jmp(&done_load_lhs); |
| |
| __ bind(&load_smi_rhs); |
| __ SmiToInteger64(kScratchRegister, rhs); |
| __ push(kScratchRegister); |
| __ fild_d(Operand(rsp, 0)); |
| __ pop(kScratchRegister); |
| |
| __ bind(&done); |
| } |
| |
| |
| void FloatingPointHelper::CheckFloatOperands(MacroAssembler* masm, |
| Label* non_float) { |
| Label test_other, done; |
| // Test if both operands are numbers (heap_numbers or smis). |
| // If not, jump to label non_float. |
| __ JumpIfSmi(rdx, &test_other); // argument in rdx is OK |
| __ Cmp(FieldOperand(rdx, HeapObject::kMapOffset), Factory::heap_number_map()); |
| __ j(not_equal, non_float); // The argument in rdx is not a number. |
| |
| __ bind(&test_other); |
| __ JumpIfSmi(rax, &done); // argument in rax is OK |
| __ Cmp(FieldOperand(rax, HeapObject::kMapOffset), Factory::heap_number_map()); |
| __ j(not_equal, non_float); // The argument in rax is not a number. |
| |
| // Fall-through: Both operands are numbers. |
| __ bind(&done); |
| } |
| |
| |
| const char* GenericBinaryOpStub::GetName() { |
| switch (op_) { |
| case Token::ADD: return "GenericBinaryOpStub_ADD"; |
| case Token::SUB: return "GenericBinaryOpStub_SUB"; |
| case Token::MUL: return "GenericBinaryOpStub_MUL"; |
| case Token::DIV: return "GenericBinaryOpStub_DIV"; |
| case Token::BIT_OR: return "GenericBinaryOpStub_BIT_OR"; |
| case Token::BIT_AND: return "GenericBinaryOpStub_BIT_AND"; |
| case Token::BIT_XOR: return "GenericBinaryOpStub_BIT_XOR"; |
| case Token::SAR: return "GenericBinaryOpStub_SAR"; |
| case Token::SHL: return "GenericBinaryOpStub_SHL"; |
| case Token::SHR: return "GenericBinaryOpStub_SHR"; |
| default: return "GenericBinaryOpStub"; |
| } |
| } |
| |
| |
| void GenericBinaryOpStub::GenerateSmiCode(MacroAssembler* masm, Label* slow) { |
| // Perform fast-case smi code for the operation (rax <op> rbx) and |
| // leave result in register rax. |
| |
| // Smi check both operands. |
| __ JumpIfNotBothSmi(rax, rbx, slow); |
| |
| switch (op_) { |
| case Token::ADD: { |
| __ SmiAdd(rax, rax, rbx, slow); |
| break; |
| } |
| |
| case Token::SUB: { |
| __ SmiSub(rax, rax, rbx, slow); |
| break; |
| } |
| |
| case Token::MUL: |
| __ SmiMul(rax, rax, rbx, slow); |
| break; |
| |
| case Token::DIV: |
| __ SmiDiv(rax, rax, rbx, slow); |
| break; |
| |
| case Token::MOD: |
| __ SmiMod(rax, rax, rbx, slow); |
| break; |
| |
| case Token::BIT_OR: |
| __ SmiOr(rax, rax, rbx); |
| break; |
| |
| case Token::BIT_AND: |
| __ SmiAnd(rax, rax, rbx); |
| break; |
| |
| case Token::BIT_XOR: |
| __ SmiXor(rax, rax, rbx); |
| break; |
| |
| case Token::SHL: |
| case Token::SHR: |
| case Token::SAR: |
| // Move the second operand into register ecx. |
| __ movl(rcx, rbx); |
| // Perform the operation. |
| switch (op_) { |
| case Token::SAR: |
| __ SmiShiftArithmeticRight(rax, rax, rbx); |
| break; |
| case Token::SHR: |
| __ SmiShiftLogicalRight(rax, rax, rbx, slow); |
| break; |
| case Token::SHL: |
| __ SmiShiftLeft(rax, rax, rbx, slow); |
| break; |
| default: |
| UNREACHABLE(); |
| } |
| break; |
| |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| } |
| |
| |
| void GenericBinaryOpStub::Generate(MacroAssembler* masm) { |
| Label call_runtime; |
| if (flags_ == SMI_CODE_IN_STUB) { |
| // The fast case smi code wasn't inlined in the stub caller |
| // code. Generate it here to speed up common operations. |
| Label slow; |
| __ movq(rbx, Operand(rsp, 1 * kPointerSize)); // get y |
| __ movq(rax, Operand(rsp, 2 * kPointerSize)); // get x |
| GenerateSmiCode(masm, &slow); |
| __ ret(2 * kPointerSize); // remove both operands |
| |
| // Too bad. The fast case smi code didn't succeed. |
| __ bind(&slow); |
| } |
| |
| // Setup registers. |
| __ movq(rax, Operand(rsp, 1 * kPointerSize)); // get y |
| __ movq(rdx, Operand(rsp, 2 * kPointerSize)); // get x |
| |
| // Floating point case. |
| switch (op_) { |
| case Token::ADD: |
| case Token::SUB: |
| case Token::MUL: |
| case Token::DIV: { |
| // rax: y |
| // rdx: x |
| FloatingPointHelper::CheckFloatOperands(masm, &call_runtime); |
| // Fast-case: Both operands are numbers. |
| // Allocate a heap number, if needed. |
| Label skip_allocation; |
| switch (mode_) { |
| case OVERWRITE_LEFT: |
| __ movq(rax, rdx); |
| // Fall through! |
| case OVERWRITE_RIGHT: |
| // If the argument in rax is already an object, we skip the |
| // allocation of a heap number. |
| __ JumpIfNotSmi(rax, &skip_allocation); |
| // Fall through! |
| case NO_OVERWRITE: |
| FloatingPointHelper::AllocateHeapNumber(masm, |
| &call_runtime, |
| rcx, |
| rax); |
| __ bind(&skip_allocation); |
| break; |
| default: UNREACHABLE(); |
| } |
| // xmm4 and xmm5 are volatile XMM registers. |
| FloatingPointHelper::LoadFloatOperands(masm, xmm4, xmm5); |
| |
| switch (op_) { |
| case Token::ADD: __ addsd(xmm4, xmm5); break; |
| case Token::SUB: __ subsd(xmm4, xmm5); break; |
| case Token::MUL: __ mulsd(xmm4, xmm5); break; |
| case Token::DIV: __ divsd(xmm4, xmm5); break; |
| default: UNREACHABLE(); |
| } |
| __ movsd(FieldOperand(rax, HeapNumber::kValueOffset), xmm4); |
| __ ret(2 * kPointerSize); |
| } |
| case Token::MOD: { |
| // For MOD we go directly to runtime in the non-smi case. |
| break; |
| } |
| case Token::BIT_OR: |
| case Token::BIT_AND: |
| case Token::BIT_XOR: |
| case Token::SAR: |
| case Token::SHL: |
| case Token::SHR: { |
| FloatingPointHelper::CheckFloatOperands(masm, &call_runtime); |
| // TODO(X64): Don't convert a Smi to float and then back to int32 |
| // afterwards. |
| FloatingPointHelper::LoadFloatOperands(masm); |
| |
| Label skip_allocation, non_smi_result, operand_conversion_failure; |
| |
| // Reserve space for converted numbers. |
| __ subq(rsp, Immediate(2 * kPointerSize)); |
| |
| if (use_sse3_) { |
| // Truncate the operands to 32-bit integers and check for |
| // exceptions in doing so. |
| CpuFeatures::Scope scope(CpuFeatures::SSE3); |
| __ fisttp_s(Operand(rsp, 0 * kPointerSize)); |
| __ fisttp_s(Operand(rsp, 1 * kPointerSize)); |
| __ fnstsw_ax(); |
| __ testl(rax, Immediate(1)); |
| __ j(not_zero, &operand_conversion_failure); |
| } else { |
| // Check if right operand is int32. |
| __ fist_s(Operand(rsp, 0 * kPointerSize)); |
| __ fild_s(Operand(rsp, 0 * kPointerSize)); |
| __ fucompp(); |
| __ fnstsw_ax(); |
| if (CpuFeatures::IsSupported(CpuFeatures::SAHF)) { |
| __ sahf(); |
| __ j(not_zero, &operand_conversion_failure); |
| __ j(parity_even, &operand_conversion_failure); |
| } else { |
| __ and_(rax, Immediate(0x4400)); |
| __ cmpl(rax, Immediate(0x4000)); |
| __ j(not_zero, &operand_conversion_failure); |
| } |
| // Check if left operand is int32. |
| __ fist_s(Operand(rsp, 1 * kPointerSize)); |
| __ fild_s(Operand(rsp, 1 * kPointerSize)); |
| __ fucompp(); |
| __ fnstsw_ax(); |
| if (CpuFeatures::IsSupported(CpuFeatures::SAHF)) { |
| __ sahf(); |
| __ j(not_zero, &operand_conversion_failure); |
| __ j(parity_even, &operand_conversion_failure); |
| } else { |
| __ and_(rax, Immediate(0x4400)); |
| __ cmpl(rax, Immediate(0x4000)); |
| __ j(not_zero, &operand_conversion_failure); |
| } |
| } |
| |
| // Get int32 operands and perform bitop. |
| __ pop(rcx); |
| __ pop(rax); |
| switch (op_) { |
| case Token::BIT_OR: __ or_(rax, rcx); break; |
| case Token::BIT_AND: __ and_(rax, rcx); break; |
| case Token::BIT_XOR: __ xor_(rax, rcx); break; |
| case Token::SAR: __ sarl(rax); break; |
| case Token::SHL: __ shll(rax); break; |
| case Token::SHR: __ shrl(rax); break; |
| default: UNREACHABLE(); |
| } |
| if (op_ == Token::SHR) { |
| // Check if result is non-negative and fits in a smi. |
| __ testl(rax, Immediate(0xc0000000)); |
| __ j(not_zero, &non_smi_result); |
| } else { |
| // Check if result fits in a smi. |
| __ cmpl(rax, Immediate(0xc0000000)); |
| __ j(negative, &non_smi_result); |
| } |
| // Tag smi result and return. |
| __ Integer32ToSmi(rax, rax); |
| __ ret(2 * kPointerSize); |
| |
| // All ops except SHR return a signed int32 that we load in a HeapNumber. |
| if (op_ != Token::SHR) { |
| __ bind(&non_smi_result); |
| // Allocate a heap number if needed. |
| __ movsxlq(rbx, rax); // rbx: sign extended 32-bit result |
| switch (mode_) { |
| case OVERWRITE_LEFT: |
| case OVERWRITE_RIGHT: |
| // If the operand was an object, we skip the |
| // allocation of a heap number. |
| __ movq(rax, Operand(rsp, mode_ == OVERWRITE_RIGHT ? |
| 1 * kPointerSize : 2 * kPointerSize)); |
| __ JumpIfNotSmi(rax, &skip_allocation); |
| // Fall through! |
| case NO_OVERWRITE: |
| FloatingPointHelper::AllocateHeapNumber(masm, &call_runtime, |
| rcx, rax); |
| __ bind(&skip_allocation); |
| break; |
| default: UNREACHABLE(); |
| } |
| // Store the result in the HeapNumber and return. |
| __ movq(Operand(rsp, 1 * kPointerSize), rbx); |
| __ fild_s(Operand(rsp, 1 * kPointerSize)); |
| __ fstp_d(FieldOperand(rax, HeapNumber::kValueOffset)); |
| __ ret(2 * kPointerSize); |
| } |
| |
| // Clear the FPU exception flag and reset the stack before calling |
| // the runtime system. |
| __ bind(&operand_conversion_failure); |
| __ addq(rsp, Immediate(2 * kPointerSize)); |
| if (use_sse3_) { |
| // If we've used the SSE3 instructions for truncating the |
| // floating point values to integers and it failed, we have a |
| // pending #IA exception. Clear it. |
| __ fnclex(); |
| } else { |
| // The non-SSE3 variant does early bailout if the right |
| // operand isn't a 32-bit integer, so we may have a single |
| // value on the FPU stack we need to get rid of. |
| __ ffree(0); |
| } |
| |
| // SHR should return uint32 - go to runtime for non-smi/negative result. |
| if (op_ == Token::SHR) { |
| __ bind(&non_smi_result); |
| } |
| __ movq(rax, Operand(rsp, 1 * kPointerSize)); |
| __ movq(rdx, Operand(rsp, 2 * kPointerSize)); |
| break; |
| } |
| default: UNREACHABLE(); break; |
| } |
| |
| // If all else fails, use the runtime system to get the correct |
| // result. |
| __ bind(&call_runtime); |
| switch (op_) { |
| case Token::ADD: |
| __ InvokeBuiltin(Builtins::ADD, JUMP_FUNCTION); |
| break; |
| case Token::SUB: |
| __ InvokeBuiltin(Builtins::SUB, JUMP_FUNCTION); |
| break; |
| case Token::MUL: |
| __ InvokeBuiltin(Builtins::MUL, JUMP_FUNCTION); |
| break; |
| case Token::DIV: |
| __ InvokeBuiltin(Builtins::DIV, JUMP_FUNCTION); |
| break; |
| case Token::MOD: |
| __ InvokeBuiltin(Builtins::MOD, JUMP_FUNCTION); |
| break; |
| case Token::BIT_OR: |
| __ InvokeBuiltin(Builtins::BIT_OR, JUMP_FUNCTION); |
| break; |
| case Token::BIT_AND: |
| __ InvokeBuiltin(Builtins::BIT_AND, JUMP_FUNCTION); |
| break; |
| case Token::BIT_XOR: |
| __ InvokeBuiltin(Builtins::BIT_XOR, JUMP_FUNCTION); |
| break; |
| case Token::SAR: |
| __ InvokeBuiltin(Builtins::SAR, JUMP_FUNCTION); |
| break; |
| case Token::SHL: |
| __ InvokeBuiltin(Builtins::SHL, JUMP_FUNCTION); |
| break; |
| case Token::SHR: |
| __ InvokeBuiltin(Builtins::SHR, JUMP_FUNCTION); |
| break; |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| |
| int CompareStub::MinorKey() { |
| // Encode the two parameters in a unique 16 bit value. |
| ASSERT(static_cast<unsigned>(cc_) < (1 << 15)); |
| return (static_cast<unsigned>(cc_) << 1) | (strict_ ? 1 : 0); |
| } |
| |
| |
| #undef __ |
| |
| } } // namespace v8::internal |