docs/InternalsManual.html

<title>"clang" CFE Internals Manual</title>

<h1>"clang" CFE Internals Manual</h1>

<ul>
<li><a href="#intro">Introduction</a></li>
<li><a href="#libsystem">LLVM System and Support Libraries</a></li>
<li><a href="#libbasic">The clang 'Basic' Library</a>
  <ul>
  <li><a href="#SourceLocation">The SourceLocation and SourceManager
      classes</a></li>
  </ul>
</li>
<li><a href="#liblex">The Lexer and Preprocessor Library</a>
  <ul>
  <li><a href="#Token">The Token class</a></li>
  <li><a href="#Lexer">The Lexer class</a></li>
  <li><a href="#MacroExpander">The MacroExpander class</a></li>
  <li><a href="#MultipleIncludeOpt">The MultipleIncludeOpt class</a></li>
  </ul>
</li>
<li><a href="#libparse">The Parser Library</a>
  <ul>
  </ul>
</li>
<li><a href="#libast">The AST Library</a>
  <ul>
  <li><a href="#Type">The Type class and its subclasses</a></li>
  <li><a href="#QualType">The QualType class</a></li>
  </ul>
</li>
</ul>


<!-- ======================================================================= -->
<h2 id="intro">Introduction</h2>
<!-- ======================================================================= -->

<p>This document describes some of the more important APIs and internal design
decisions made in the clang C front-end.  The purpose of this document is to
both capture some of this high level information and also describe some of the
design decisions behind it.  This is meant for people interested in hacking on
clang, not for end-users.  The description below is categorized by
libraries, and does not describe any of the clients of the libraries.</p>

<!-- ======================================================================= -->
<h2 id="libsystem">LLVM System and Support Libraries</h2>
<!-- ======================================================================= -->

<p>The LLVM libsystem library provides the basic clang system abstraction layer,
which is used for file system access.  The LLVM libsupport library provides many
underlying libraries and <a 
href="http://llvm.org/docs/ProgrammersManual.html">data-structures</a>,
 including command line option
processing and various containers.</p>

<!-- ======================================================================= -->
<h2 id="libbasic">The clang 'Basic' Library</h2>
<!-- ======================================================================= -->

<p>This library certainly needs a better name.  The 'basic' library contains a
number of low-level utilities for tracking and manipulating source buffers,
locations within the source buffers, diagnostics, tokens, target abstraction,
and information about the subset of the language being compiled for.</p>

<p>Part of this infrastructure is specific to C (such as the TargetInfo class),
other parts could be reused for other non-C-based languages (SourceLocation,
SourceManager, Diagnostics, FileManager).  When and if there is future demand
we can figure out if it makes sense to introduce a new library, move the general
classes somewhere else, or introduce some other solution.</p>

<p>We describe the roles of these classes in order of their dependencies.</p>

<!-- ======================================================================= -->
<h3 id="SourceLocation">The SourceLocation and SourceManager classes</h3>
<!-- ======================================================================= -->

<p>Strangely enough, the SourceLocation class represents a location within the
source code of the program.  Important design points include:</p>

<ol>
<li>sizeof(SourceLocation) must be extremely small, as these are embedded into
    many AST nodes and are passed around often.  Currently it is 32 bits.</li>
<li>SourceLocation must be a simple value object that can be efficiently
    copied.</li>
<li>We should be able to represent a source location for any byte of any input
    file.  This includes in the middle of tokens, in whitespace, in trigraphs,
    etc.</li>
<li>A SourceLocation must encode the current #include stack that was active when
    the location was processed.  For example, if the location corresponds to a
    token, it should contain the set of #includes active when the token was
    lexed.  This allows us to print the #include stack for a diagnostic.</li>
<li>SourceLocation must be able to describe macro expansions, capturing both
    the ultimate instantiation point and the source of the original character
    data.</li>
</ol>

<p>In practice, the SourceLocation works together with the SourceManager class
to encode two pieces of information about a location: it's physical location
and it's virtual location.  For most tokens, these will be the same.  However,
for a macro expansion (or tokens that came from a _Pragma directive) these will
describe the location of the characters corresponding to the token and the
location where the token was used (i.e. the macro instantiation point or the 
location of the _Pragma itself).</p>

<p>For efficiency, we only track one level of macro instantions: if a token was
produced by multiple instantiations, we only track the source and ultimate
destination.  Though we could track the intermediate instantiation points, this
would require extra bookkeeping and no known client would benefit substantially
from this.</p>

<p>The clang front-end inherently depends on the location of a token being
tracked correctly.  If it is ever incorrect, the front-end may get confused and
die.  The reason for this is that the notion of the 'spelling' of a Token in
clang depends on being able to find the original input characters for the token.
This concept maps directly to the "physical" location for the token.</p>

<!-- ======================================================================= -->
<h2 id="liblex">The Lexer and Preprocessor Library</h2>
<!-- ======================================================================= -->

<p>The Lexer library contains several tightly-connected classes that are involved
with the nasty process of lexing and preprocessing C source code.  The main
interface to this library for outside clients is the large <a 
href="#Preprocessor">Preprocessor</a> class.
It contains the various pieces of state that are required to coherently read
tokens out of a translation unit.</p>

<p>The core interface to the Preprocessor object (once it is set up) is the
Preprocessor::Lex method, which returns the next <a href="#Token">Token</a> from
the preprocessor stream.  There are two types of token providers that the
preprocessor is capable of reading from: a buffer lexer (provided by the <a 
href="#Lexer">Lexer</a> class) and a buffered token stream (provided by the <a
href="#MacroExpander">MacroExpander</a> class).  


<!-- ======================================================================= -->
<h3 id="Token">The Token class</h3>
<!-- ======================================================================= -->

<p>The Token class is used to represent a single lexed token.  Tokens are
intended to be used by the lexer/preprocess and parser libraries, but are not
intended to live beyond them (for example, they should not live in the ASTs).<p>

<p>Tokens most often live on the stack (or some other location that is efficient
to access) as the parser is running, but occasionally do get buffered up.  For
example, macro definitions are stored as a series of tokens, and the C++
front-end will eventually need to buffer tokens up for tentative parsing and
various pieces of look-ahead.  As such, the size of a Token matter.  On a 32-bit
system, sizeof(Token) is currently 16 bytes.</p>

<p>Tokens contain the following information:</p>

<ul>
<li><b>A SourceLocation</b> - This indicates the location of the start of the
token.</li>

<li><b>A length</b> - This stores the length of the token as stored in the
SourceBuffer.  For tokens that include them, this length includes trigraphs and
escaped newlines which are ignored by later phases of the compiler.  By pointing
into the original source buffer, it is always possible to get the original
spelling of a token completely accurately.</li>

<li><b>IdentifierInfo</b> - If a token takes the form of an identifier, and if
identifier lookup was enabled when the token was lexed (e.g. the lexer was not
reading in 'raw' mode) this contains a pointer to the unique hash value for the
identifier.  Because the lookup happens before keyword identification, this
field is set even for language keywords like 'for'.</li>

<li><b>TokenKind</b> - This indicates the kind of token as classified by the
lexer.  This includes things like <tt>tok::starequal</tt> (for the "*="
operator), <tt>tok::ampamp</tt> for the "&amp;&amp;" token, and keyword values
(e.g. <tt>tok::kw_for</tt>) for identifiers that correspond to keywords.  Note 
that some tokens can be spelled multiple ways.  For example, C++ supports
"operator keywords", where things like "and" are treated exactly like the
"&amp;&amp;" operator.  In these cases, the kind value is set to
<tt>tok::ampamp</tt>, which is good for the parser, which doesn't have to 
consider both forms.  For something that cares about which form is used (e.g.
the preprocessor 'stringize' operator) the spelling indicates the original
form.</li>

<li><b>Flags</b> - There are currently four flags tracked by the
lexer/preprocessor system on a per-token basis:

  <ol>
  <li><b>StartOfLine</b> - This was the first token that occurred on its input
       source line.</li>
  <li><b>LeadingSpace</b> - There was a space character either immediately
       before the token or transitively before the token as it was expanded
       through a macro.  The definition of this flag is very closely defined by
       the stringizing requirements of the preprocessor.</li>
  <li><b>DisableExpand</b> - This flag is used internally to the preprocessor to
      represent identifier tokens which have macro expansion disabled.  This
      prevents them from being considered as candidates for macro expansion ever
      in the future.</li>
  <li><b>NeedsCleaning</b> - This flag is set if the original spelling for the
      token includes a trigraph or escaped newline.  Since this is uncommon,
      many pieces of code can fast-path on tokens that did not need cleaning.
      </p>
   </ol>
</li>
</ul>

<p>One interesting (and somewhat unusual) aspect of tokens is that they don't
contain any semantic information about the lexed value.  For example, if the
token was a pp-number token, we do not represent the value of the number that
was lexed (this is left for later pieces of code to decide).  Additionally, the
lexer library has no notion of typedef names vs variable names: both are
returned as identifiers, and the parser is left to decide whether a specific
identifier is a typedef or a variable (tracking this requires scope information 
among other things).</p>

<!-- ======================================================================= -->
<h3 id="Lexer">The Lexer class</h3>
<!-- ======================================================================= -->

<p>The Lexer class provides the mechanics of lexing tokens out of a source
buffer and deciding what they mean.  The Lexer is complicated by the fact that
it operates on raw buffers that have not had spelling eliminated (this is a
necessity to get decent performance), but this is countered with careful coding
as well as standard performance techniques (for example, the comment handling
code is vectorized on X86 and PowerPC hosts).</p>

<p>The lexer has a couple of interesting modal features:</p>

<ul>
<li>The lexer can operate in 'raw' mode.  This mode has several features that
    make it possible to quickly lex the file (e.g. it stops identifier lookup,
    doesn't specially handle preprocessor tokens, handles EOF differently, etc).
    This mode is used for lexing within an "<tt>#if 0</tt>" block, for
    example.</li>
<li>The lexer can capture and return comments as tokens.  This is required to
    support the -C preprocessor mode, which passes comments through, and is
    used by the diagnostic checker to identifier expect-error annotations.</li>
<li>The lexer can be in ParsingFilename mode, which happens when preprocessing
    after reading a #include directive.  This mode changes the parsing of '&lt;'
    to return an "angled string" instead of a bunch of tokens for each thing
    within the filename.</li>
<li>When parsing a preprocessor directive (after "<tt>#</tt>") the
    ParsingPreprocessorDirective mode is entered.  This changes the parser to
    return EOM at a newline.</li>
<li>The Lexer uses a LangOptions object to know whether trigraphs are enabled,
    whether C++ or ObjC keywords are recognized, etc.</li>
</ul>

<p>In addition to these modes, the lexer keeps track of a couple of other
   features that are local to a lexed buffer, which change as the buffer is
   lexed:</p>

<ul>
<li>The Lexer uses BufferPtr to keep track of the current character being
    lexed.</li>
<li>The Lexer uses IsAtStartOfLine to keep track of whether the next lexed token
    will start with its "start of line" bit set.</li>
<li>The Lexer keeps track of the current #if directives that are active (which
    can be nested).</li>
<li>The Lexer keeps track of an <a href="#MultipleIncludeOpt">
    MultipleIncludeOpt</a> object, which is used to
    detect whether the buffer uses the standard "<tt>#ifndef XX</tt> /
    <tt>#define XX</tt>" idiom to prevent multiple inclusion.  If a buffer does,
    subsequent includes can be ignored if the XX macro is defined.</li>
</ul>

<!-- ======================================================================= -->
<h3 id="MacroExpander">The MacroExpander class</h3>
<!-- ======================================================================= -->

<p>The MacroExpander class is a token provider that returns tokens from a list
of tokens that came from somewhere else.  It typically used for two things: 1)
returning tokens from a macro definition as it is being expanded 2) returning
tokens from an arbitrary buffer of tokens.  The later use is used by _Pragma and
will most likely be used to handle unbounded look-ahead for the C++ parser.</p>

<!-- ======================================================================= -->
<h3 id="MultipleIncludeOpt">The MultipleIncludeOpt class</h3>
<!-- ======================================================================= -->

<p>The MultipleIncludeOpt class implements a really simple little state machine
that is used to detect the standard "<tt>#ifndef XX</tt> / <tt>#define XX</tt>"
idiom that people typically use to prevent multiple inclusion of headers.  If a
buffer uses this idiom and is subsequently #include'd, the preprocessor can
simply check to see whether the guarding condition is defined or not.  If so,
the preprocessor can completely ignore the include of the header.</p>



<!-- ======================================================================= -->
<h2 id="libparse">The Parser Library</h2>
<!-- ======================================================================= -->

<!-- ======================================================================= -->
<h2 id="libast">The AST Library</h2>
<!-- ======================================================================= -->

<!-- ======================================================================= -->
<h3 id="Type">The Type class and its subclasses</h3>
<!-- ======================================================================= -->

<p>The Type class (and its subclasses) are an important part of the AST.  Types
are accessed through the ASTContext class, which implicitly creates and uniques
them as they are needed.  Types have a couple of non-obvious features: 1) they
do not capture type qualifiers like const or volatile (See
<a href="#QualType">QualType</a>), and 2) they implicitly capture typedef
information.  Once created, types are immutable (unlike decls).</p>

<p>Typedefs in C make semantic analysis a bit more complex than it would
be without them.  The issue is that we want to capture typedef information
and represent it in the AST perfectly, but the semantics of operations need to
"see through" typedefs.  For example, consider this code:</p>

<code>
void func() {<br>
  typedef int foo;<br>
  foo X, *Y;<br>
  typedef foo* bar;<br>
  bar Z;<br>
  *X;   <i>// error</i><br>
  **Y;  <i>// error</i><br>
  **Z;  <i>// error</i><br>
}<br>
</code>

<p>The code above is illegal, and thus we expect there to be diagnostics emitted
on the annotated lines.  In this example, we expect to get:</p>

<pre>
<b>test.c:6:1: error: indirection requires pointer operand ('foo' invalid)</b>
*X; // error
<font color="blue">^~</font>
<b>test.c:7:1: error: indirection requires pointer operand ('foo' invalid)</b>
**Y; // error
<font color="blue">^~~</font>
<b>test.c:8:1: error: indirection requires pointer operand ('foo' invalid)</b>
**Z; // error
<font color="blue">^~~</font>
</pre>

<p>While this example is somewhat silly, it illustrates the point: we want to
retain typedef information where possible, so that we can emit errors about
"<tt>std::string</tt>" instead of "<tt>std::basic_string&lt;char, std:...</tt>".
Doing this requires properly keeping typedef information (for example, the type
of "X" is "foo", not "int"), and requires properly propagating it through the
various operators (for example, the type of *Y is "foo", not "int").  In order
to retain this information, the type of these expressions is an instance of the
TypedefType class, which indicates that the type of these expressions is a
typedef for foo.
</p>

<p>Representing types like this is great for diagnostics, because the
user-specified type is always immediately available.  There are two problems
with this: first, various semantic checks need to make judgements about the
<em>actual structure</em> of a type, ignoring typdefs.  Second, we need an
efficient way to query whether two types are structurally identical to each
other, ignoring typedefs.  The solution to both of these problems is the idea of
canonical types.</p>

<h4>Canonical Types</h4>

<p>Every instance of the Type class contains a canonical type pointer.  For
simple types with no typedefs involved (e.g. "<tt>int</tt>", "<tt>int*</tt>",
"<tt>int**</tt>"), the type just points to itself.  For types that have a
typedef somewhere in their structure (e.g. "<tt>foo</tt>", "<tt>foo*</tt>",
"<tt>foo**</tt>", "<tt>bar</tt>"), the canonical type pointer points to their
structurally equivalent type without any typedefs (e.g. "<tt>int</tt>",
"<tt>int*</tt>", "<tt>int**</tt>", and "<tt>int*</tt>" respectively).</p>

<p>This design provides a constant time operation (dereferencing the canonical
type pointer) that gives us access to the structure of types.  For example,
we can trivially tell that "bar" and "foo*" are the same type by dereferencing
their canonical type pointers and doing a pointer comparison (they both point
to the single "<tt>int*</tt>" type).</p>

<p>Canonical types and typedef types bring up some complexities that must be
carefully managed.  Specifically, the "isa/cast/dyncast" operators generally
shouldn't be used in code that is inspecting the AST.  For example, when type
checking the indirection operator (unary '*' on a pointer), the type checker
must verify that the operand has a pointer type.  It would not be correct to
check that with "<tt>isa&lt;PointerType&gt;(SubExpr-&gt;getType())</tt>",
because this predicate would fail if the subexpression had a typedef type.</p>

<p>The solution to this problem are a set of helper methods on Type, used to
check their properties.  In this case, it would be correct to use
"<tt>SubExpr-&gt;getType()-&gt;isPointerType()</tt>" to do the check.  This
predicate will return true if the <em>canonical type is a pointer</em>, which is
true any time the type is structurally a pointer type.  The only hard part here
is remembering not to use the <tt>isa/cast/dyncast</tt> operations.</p>

<p>The second problem we face is how to get access to the pointer type once we
know it exists.  To continue the example, the result type of the indirection
operator is the pointee type of the subexpression.  In order to determine the
type, we need to get the instance of PointerType that best captures the typedef
information in the program.  If the type of the expression is literally a
PointerType, we can return that, otherwise we have to dig through the
typedefs to find the pointer type.  For example, if the subexpression had type
"<tt>foo*</tt>", we could return that type as the result.  If the subexpression
had type "<tt>bar</tt>", we want to return "<tt>foo*</tt>" (note that we do
<em>not</em> want "<tt>int*</tt>").  In order to provide all of this, Type has
a getAsPointerType() method that checks whether the type is structurally a
PointerType and, if so, returns the best one.  If not, it returns a null
pointer.</p>

<p>This structure is somewhat mystical, but after meditating on it, it will 
make sense to you :).</p>

<!-- ======================================================================= -->
<h3 id="QualType">The QualType class</h3>
<!-- ======================================================================= -->

<p>The QualType class is designed as a trivial value class that is small,
passed by-value and is efficient to query.  The idea of QualType is that it
stores the type qualifiers (const, volatile, restrict) separately from the types
themselves: QualType is conceptually a pair of "Type*" and bits for the type
qualifiers.</p>

<p>By storing the type qualifiers as bits in the conceptual pair, it is
extremely efficient to get the set of qualifiers on a QualType (just return the
field of the pair), add a type qualifier (which is a trivial constant-time
operation that sets a bit), and remove one or more type qualifiers (just return
a QualType with the bitfield set to empty).</p>

<p>Further, because the bits are stored outside of the type itself, we do not
need to create duplicates of types with different sets of qualifiers (i.e. there
is only a single heap allocated "int" type: "const int" and "volatile const int"
both point to the same heap allocated "int" type).  This reduces the heap size
used to represent bits and also means we do not have to consider qualifiers when
uniquing types (<a href="#Type">Type</a> does not even contain qualifiers).</p>

<p>In practice, on hosts where it is safe, the 3 type qualifiers are stored in
the low bit of the pointer to the Type object.  This means that QualType is
exactly the same size as a pointer, and this works fine on any system where
malloc'd objects are at least 8 byte aligned.</p>