| /* |
| * mke2fs.c - Make a ext2fs filesystem. |
| * |
| * Copyright (C) 1994 Theodore Ts'o. This file may be redistributed |
| * under the terms of the GNU Public License. |
| */ |
| |
| /* Usage: mke2fs [options] device |
| * |
| * The device may be a block device or a image of one, but this isn't |
| * enforced (but it's not much fun on a character device :-). |
| */ |
| |
| #include <string.h> |
| #include <fcntl.h> |
| #include <ctype.h> |
| #include <termios.h> |
| #include <time.h> |
| #include <getopt.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <mntent.h> |
| #include <malloc.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| |
| #include <linux/fs.h> |
| #include <linux/ext2_fs.h> |
| |
| #include "et/com_err.h" |
| #include "ext2fs/ext2fs.h" |
| #include "../version.h" |
| |
| #define STRIDE_LENGTH 8 |
| |
| extern int isatty(int); |
| extern FILE *fpopen(const char *cmd, const char *mode); |
| |
| const char * program_name = "mke2fs"; |
| const char * device_name = NULL; |
| |
| /* Command line options */ |
| int cflag = 0; |
| int verbose = 0; |
| int quiet = 0; |
| int super_only = 0; |
| char *bad_blocks_filename = 0; |
| |
| struct ext2_super_block param; |
| |
| static void usage(NOARGS) |
| { |
| fprintf(stderr, |
| "Usage: %s [-c|-t|-l filename] [-b block-size] " |
| "[-f fragment-size]\n\t[-i bytes-per-inode] " |
| "[-m reserved-blocks-percentage] [-qvS]\n" |
| "\t[-g blocks-per-group] device [blocks-count]\n", |
| program_name); |
| exit(1); |
| } |
| |
| static int log2(int arg) |
| { |
| int l = 0; |
| |
| arg >>= 1; |
| while (arg) { |
| l++; |
| arg >>= 1; |
| } |
| return l; |
| } |
| |
| static long valid_offset (int fd, ext2_loff_t offset) |
| { |
| char ch; |
| |
| if (ext2_llseek (fd, offset, 0) < 0) |
| return 0; |
| if (read (fd, &ch, 1) < 1) |
| return 0; |
| return 1; |
| } |
| |
| static int count_blocks (int fd) |
| { |
| ext2_loff_t high, low; |
| |
| low = 0; |
| for (high = 1; valid_offset (fd, high); high *= 2) |
| low = high; |
| while (low < high - 1) |
| { |
| const ext2_loff_t mid = (low + high) / 2; |
| |
| if (valid_offset (fd, mid)) |
| low = mid; |
| else |
| high = mid; |
| } |
| valid_offset (fd, 0); |
| return (low + 1) / 1024; |
| } |
| |
| static int get_size(const char *file) |
| { |
| int fd; |
| int size; |
| |
| fd = open(file, O_RDWR); |
| if (fd < 0) { |
| com_err("open", errno, "while trying to determine size of %s", |
| file); |
| exit(1); |
| } |
| if (ioctl(fd, BLKGETSIZE, &size) >= 0) { |
| close(fd); |
| return size / (EXT2_BLOCK_SIZE(¶m) / 512); |
| } |
| |
| size = count_blocks(fd); |
| close(fd); |
| return size; |
| } |
| |
| static void check_mount(NOARGS) |
| { |
| FILE * f; |
| struct mntent * mnt; |
| |
| if ((f = setmntent (MOUNTED, "r")) == NULL) |
| return; |
| while ((mnt = getmntent (f)) != NULL) |
| if (strcmp (device_name, mnt->mnt_fsname) == 0) |
| break; |
| endmntent (f); |
| if (!mnt) |
| return; |
| |
| fprintf(stderr, "%s is mounted; will not make a filesystem here!\n", |
| device_name); |
| exit(1); |
| } |
| |
| /* |
| * Helper function for read_bb_file and test_disk |
| */ |
| static void invalid_block(ext2_filsys fs, blk_t blk) |
| { |
| printf("Bad block %lu out of range; ignored.\n", blk); |
| return; |
| } |
| |
| /* |
| * Reads the bad blocks list from a file |
| */ |
| static void read_bb_file(ext2_filsys fs, badblocks_list *bb_list, |
| const char *bad_blocks_file) |
| { |
| FILE *f; |
| errcode_t retval; |
| |
| f = fopen(bad_blocks_file, "r"); |
| if (!f) { |
| com_err("read_bad_blocks_file", errno, |
| "while trying to open %s", bad_blocks_file); |
| exit(1); |
| } |
| retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block); |
| fclose (f); |
| if (retval) { |
| com_err("ext2fs_read_bb_FILE", retval, |
| "while reading in list of bad blocks from file"); |
| exit(1); |
| } |
| } |
| |
| /* |
| * Runs the badblocks program to test the disk |
| */ |
| static void test_disk(ext2_filsys fs, badblocks_list *bb_list) |
| { |
| FILE *f; |
| errcode_t retval; |
| char buf[1024]; |
| |
| sprintf(buf, "badblocks %s%s %ld", quiet ? "" : "-s ", |
| fs->device_name, |
| fs->super->s_blocks_count); |
| if (verbose) |
| printf("Running command: %s\n", buf); |
| f = popen(buf, "r"); |
| if (!f) { |
| com_err("popen", errno, |
| "while trying run '%s'", buf); |
| exit(1); |
| } |
| retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block); |
| pclose(f); |
| if (retval) { |
| com_err("ext2fs_read_bb_FILE", retval, |
| "while processing list of bad blocks from program"); |
| exit(1); |
| } |
| } |
| |
| static void handle_bad_blocks(ext2_filsys fs, badblocks_list bb_list) |
| { |
| int i, j; |
| int must_be_good; |
| blk_t blk; |
| badblocks_iterate bb_iter; |
| errcode_t retval; |
| blk_t group_block; |
| int group; |
| int group_bad; |
| |
| if (!bb_list) |
| return; |
| |
| /* |
| * The primary superblock and group descriptors *must* be |
| * good; if not, abort. |
| */ |
| must_be_good = fs->super->s_first_data_block + 1 + fs->desc_blocks; |
| for (i = fs->super->s_first_data_block; i <= must_be_good; i++) { |
| if (badblocks_list_test(bb_list, i)) { |
| fprintf(stderr, "Block %d in primary superblock/group " |
| "descriptor area bad.\n", i); |
| fprintf(stderr, "Blocks %ld through %d must be good " |
| "in order to build a filesystem.\n", |
| fs->super->s_first_data_block, must_be_good); |
| fprintf(stderr, "Aborting....\n"); |
| exit(1); |
| } |
| } |
| |
| /* |
| * See if any of the bad blocks are showing up in the backup |
| * superblocks and/or group descriptors. If so, issue a |
| * warning and adjust the block counts appropriately. |
| */ |
| group_block = fs->super->s_first_data_block + |
| fs->super->s_blocks_per_group; |
| group_bad = 0; |
| |
| for (i = 1; i < fs->group_desc_count; i++) { |
| for (j=0; j < fs->desc_blocks+1; j++) { |
| if (badblocks_list_test(bb_list, group_block + |
| j)) { |
| if (!group_bad) |
| fprintf(stderr, |
| "Warning: the backup superblock/group descriptors at block %ld contain\n" |
| " bad blocks.\n\n", |
| group_block); |
| group_bad++; |
| group = ext2fs_group_of_blk(fs, group_block+j); |
| fs->group_desc[group].bg_free_blocks_count++; |
| fs->super->s_free_blocks_count++; |
| } |
| } |
| group_block += fs->super->s_blocks_per_group; |
| } |
| |
| /* |
| * Mark all the bad blocks as used... |
| */ |
| retval = badblocks_list_iterate_begin(bb_list, &bb_iter); |
| if (retval) { |
| com_err("badblocks_list_iterate_begin", retval, |
| "while marking bad blocks as used"); |
| exit(1); |
| } |
| while (badblocks_list_iterate(bb_iter, &blk)) |
| ext2fs_mark_block_bitmap(fs->block_map, blk); |
| badblocks_list_iterate_end(bb_iter); |
| } |
| |
| static void new_table_block(ext2_filsys fs, blk_t first_block, |
| const char *name, int num, int initialize, |
| const char *buf, blk_t *new_block) |
| { |
| errcode_t retval; |
| blk_t blk; |
| int i; |
| int count; |
| |
| retval = ext2fs_get_free_blocks(fs, first_block, |
| first_block + fs->super->s_blocks_per_group, |
| num, fs->block_map, new_block); |
| if (retval) { |
| printf("Could not allocate %d block(s) for %s: %s\n", |
| num, name, error_message(retval)); |
| ext2fs_unmark_valid(fs); |
| return; |
| } |
| if (initialize) { |
| blk = *new_block; |
| for (i=0; i < num; i += STRIDE_LENGTH, blk += STRIDE_LENGTH) { |
| if (num-i > STRIDE_LENGTH) |
| count = STRIDE_LENGTH; |
| else |
| count = num - i; |
| retval = io_channel_write_blk(fs->io, blk, count, buf); |
| if (retval) |
| printf("Warning: could not write %d blocks " |
| "starting at %ld for %s: %s\n", |
| count, blk, name, |
| error_message(retval)); |
| } |
| } |
| blk = *new_block; |
| for (i = 0; i < num; i++, blk++) |
| ext2fs_mark_block_bitmap(fs->block_map, blk); |
| } |
| |
| static void alloc_tables(ext2_filsys fs) |
| { |
| blk_t group_blk; |
| int i; |
| char *buf; |
| |
| buf = malloc(fs->blocksize * STRIDE_LENGTH); |
| if (!buf) { |
| com_err("malloc", ENOMEM, "while allocating zeroizing buffer"); |
| exit(1); |
| } |
| memset(buf, 0, fs->blocksize * STRIDE_LENGTH); |
| |
| group_blk = fs->super->s_first_data_block; |
| if (!quiet) |
| printf("Writing inode tables: "); |
| for (i = 0; i < fs->group_desc_count; i++) { |
| if (!quiet) |
| printf("%4d/%4ld", i, fs->group_desc_count); |
| new_table_block(fs, group_blk, "block bitmap", 1, 0, buf, |
| &fs->group_desc[i].bg_block_bitmap); |
| new_table_block(fs, group_blk, "inode bitmap", 1, 0, buf, |
| &fs->group_desc[i].bg_inode_bitmap); |
| new_table_block(fs, group_blk, "inode table", |
| fs->inode_blocks_per_group, |
| !super_only, buf, |
| &fs->group_desc[i].bg_inode_table); |
| |
| group_blk += fs->super->s_blocks_per_group; |
| if (!quiet) |
| printf("\b\b\b\b\b\b\b\b\b"); |
| } |
| if (!quiet) |
| printf("done \n"); |
| } |
| |
| static void create_root_dir(ext2_filsys fs) |
| { |
| errcode_t retval; |
| struct ext2_inode inode; |
| |
| retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, EXT2_ROOT_INO, 0); |
| if (retval) { |
| com_err("ext2fs_mkdir", retval, "while creating root dir"); |
| exit(1); |
| } |
| if (geteuid()) { |
| retval = ext2fs_read_inode(fs, EXT2_ROOT_INO, &inode); |
| if (retval) { |
| com_err("ext2fs_read_inode", retval, |
| "while reading root inode"); |
| exit(1); |
| } |
| inode.i_uid = geteuid(); |
| retval = ext2fs_write_inode(fs, EXT2_ROOT_INO, &inode); |
| if (retval) { |
| com_err("ext2fs_write_inode", retval, |
| "while setting root inode ownership"); |
| exit(1); |
| } |
| } |
| } |
| |
| static void create_lost_and_found(ext2_filsys fs) |
| { |
| errcode_t retval; |
| ino_t ino; |
| const char *name = "lost+found"; |
| int i; |
| |
| retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, 0, name); |
| if (retval) { |
| com_err("ext2fs_mkdir", retval, "while creating /lost+found"); |
| exit(1); |
| } |
| |
| retval = ext2fs_lookup(fs, EXT2_ROOT_INO, name, strlen(name), 0, &ino); |
| if (retval) { |
| com_err("ext2_lookup", retval, "while looking up /lost+found"); |
| exit(1); |
| } |
| |
| for (i=1; i < EXT2_NDIR_BLOCKS; i++) { |
| retval = ext2fs_expand_dir(fs, ino); |
| if (retval) { |
| com_err("ext2fs_expand_dir", retval, |
| "while expanding /lost+found"); |
| exit(1); |
| } |
| } |
| } |
| |
| static void create_bad_block_inode(ext2_filsys fs, badblocks_list bb_list) |
| { |
| errcode_t retval; |
| |
| ext2fs_mark_inode_bitmap(fs->inode_map, EXT2_BAD_INO); |
| fs->group_desc[0].bg_free_inodes_count--; |
| fs->super->s_free_inodes_count--; |
| retval = ext2fs_update_bb_inode(fs, bb_list); |
| if (retval) { |
| com_err("ext2fs_update_bb_inode", retval, |
| "while setting bad block inode"); |
| exit(1); |
| } |
| |
| } |
| |
| static void reserve_inodes(ext2_filsys fs) |
| { |
| ino_t i; |
| int group; |
| |
| for (i = EXT2_ROOT_INO + 1; i < EXT2_FIRST_INO; i++) { |
| ext2fs_mark_inode_bitmap(fs->inode_map, i); |
| group = ext2fs_group_of_ino(fs, i); |
| fs->group_desc[group].bg_free_inodes_count--; |
| fs->super->s_free_inodes_count--; |
| } |
| ext2fs_mark_ib_dirty(fs); |
| } |
| |
| static void zap_bootblock(ext2_filsys fs) |
| { |
| char buf[512]; |
| int retval; |
| |
| memset(buf, 0, 512); |
| |
| retval = io_channel_write_blk(fs->io, 0, -512, buf); |
| if (retval) |
| printf("Warning: could not erase block 0: %s\n", |
| error_message(retval)); |
| } |
| |
| |
| static void show_stats(ext2_filsys fs) |
| { |
| struct ext2_super_block *s = fs->super; |
| blk_t group_block; |
| int i, col_left; |
| |
| if (param.s_blocks_count != s->s_blocks_count) |
| printf("warning: %ld blocks unused.\n\n", |
| param.s_blocks_count - s->s_blocks_count); |
| |
| printf("%lu inodes, %lu blocks\n", s->s_inodes_count, |
| s->s_blocks_count); |
| printf("%lu blocks (%2.2f%%) reserved for the super user\n", |
| s->s_r_blocks_count, |
| 100.0 * s->s_r_blocks_count / s->s_blocks_count); |
| printf("First data block=%lu\n", s->s_first_data_block); |
| printf("Block size=%u (log=%lu)\n", fs->blocksize, |
| s->s_log_block_size); |
| printf("Fragment size=%u (log=%lu)\n", fs->fragsize, |
| s->s_log_frag_size); |
| printf("%lu block group%s\n", fs->group_desc_count, |
| (fs->group_desc_count > 1) ? "s" : ""); |
| printf("%lu blocks per group, %lu fragments per group\n", |
| s->s_blocks_per_group, s->s_frags_per_group); |
| printf("%lu inodes per group\n", s->s_inodes_per_group); |
| |
| if (fs->group_desc_count == 1) { |
| printf("\n"); |
| return; |
| } |
| |
| printf("Superblock backups stored on blocks: "); |
| group_block = s->s_first_data_block; |
| col_left = 0; |
| for (i = 1; i < fs->group_desc_count; i++) { |
| group_block += s->s_blocks_per_group; |
| if (!col_left--) { |
| printf("\n\t"); |
| col_left = 8; |
| } |
| printf("%lu", group_block); |
| if (i != fs->group_desc_count - 1) |
| printf(", "); |
| } |
| printf("\n\n"); |
| } |
| |
| static void PRS(int argc, char *argv[]) |
| { |
| char c; |
| int size; |
| char * tmp; |
| char *oldpath; |
| static char newpath[PATH_MAX]; |
| int inode_ratio = 4096; |
| int reserved_ratio = 5; |
| |
| /* Update our PATH to include /sbin */ |
| strcpy(newpath, "PATH=/sbin:"); |
| if ((oldpath = getenv("PATH")) != NULL) |
| strcat(newpath, oldpath); |
| putenv(newpath); |
| |
| setbuf(stdout, NULL); |
| setbuf(stderr, NULL); |
| initialize_ext2_error_table(); |
| memset(¶m, 0, sizeof(struct ext2_super_block)); |
| |
| fprintf (stderr, "mke2fs %s, %s for EXT2 FS %s, %s\n", |
| E2FSPROGS_VERSION, E2FSPROGS_DATE, |
| EXT2FS_VERSION, EXT2FS_DATE); |
| if (argc && *argv) |
| program_name = *argv; |
| while ((c = getopt (argc, argv, "b:cf:g:i:l:m:qtvS")) != EOF) |
| switch (c) { |
| case 'b': |
| size = strtoul(optarg, &tmp, 0); |
| if (size < 1024 || size > 4096 || *tmp) { |
| com_err(program_name, 0, "bad block size - %s", |
| optarg); |
| exit(1); |
| } |
| param.s_log_block_size = |
| log2(size >> EXT2_MIN_BLOCK_LOG_SIZE); |
| break; |
| case 'c': |
| case 't': /* Check for bad blocks */ |
| cflag = 1; |
| break; |
| case 'f': |
| size = strtoul(optarg, &tmp, 0); |
| if (size < 1024 || size > 4096 || *tmp) { |
| com_err(program_name, 0, "bad fragment size - %s", |
| optarg); |
| exit(1); |
| } |
| param.s_log_frag_size = |
| log2(size >> EXT2_MIN_BLOCK_LOG_SIZE); |
| printf("Warning: fragments not supported. " |
| "Ignoring -f option\n"); |
| break; |
| case 'g': |
| param.s_blocks_per_group = strtoul(optarg, &tmp, 0); |
| if (*tmp) { |
| com_err(program_name, 0, |
| "Illegal number for blocks per group"); |
| exit(1); |
| } |
| if (param.s_blocks_per_group < 256 || |
| param.s_blocks_per_group > 8192 || *tmp) { |
| com_err(program_name, 0, |
| "blocks per group count out of range"); |
| exit(1); |
| } |
| if ((param.s_blocks_per_group % 8) != 0) { |
| com_err(program_name, 0, |
| "blocks per group must be multiple of 8"); |
| exit(1); |
| } |
| break; |
| case 'i': |
| inode_ratio = strtoul(optarg, &tmp, 0); |
| if (inode_ratio < 1024 || inode_ratio > 256 * 1024 || |
| *tmp) { |
| com_err(program_name, 0, "bad inode ratio - %s", |
| optarg); |
| exit(1); |
| } |
| break; |
| case 'l': |
| bad_blocks_filename = malloc(strlen(optarg)+1); |
| if (!bad_blocks_filename) { |
| com_err(program_name, ENOMEM, |
| "in malloc for bad_blocks_filename"); |
| exit(1); |
| } |
| strcpy(bad_blocks_filename, optarg); |
| break; |
| case 'm': |
| reserved_ratio = strtoul(optarg, &tmp, 0); |
| if (reserved_ratio > 50 || *tmp) { |
| com_err(program_name, 0, |
| "bad reserved blocks percent - %s", |
| optarg); |
| exit(1); |
| } |
| break; |
| case 'v': |
| verbose = 1; |
| break; |
| case 'q': |
| quiet = 1; |
| break; |
| case 'S': |
| super_only = 1; |
| break; |
| default: |
| usage(); |
| } |
| if (optind == argc) |
| usage(); |
| device_name = argv[optind]; |
| optind++; |
| if (optind < argc) { |
| param.s_blocks_count = strtoul(argv[optind++], &tmp, 0); |
| if (*tmp) { |
| com_err(program_name, 0, "bad blocks count - %s", |
| argv[optind - 1]); |
| exit(1); |
| } |
| } |
| if (optind < argc) |
| usage(); |
| param.s_log_frag_size = param.s_log_block_size; |
| |
| if (!param.s_blocks_count) |
| param.s_blocks_count = get_size(device_name); |
| |
| /* |
| * Calculate number of inodes based on the inode ratio |
| */ |
| param.s_inodes_count = |
| ((long long) param.s_blocks_count * EXT2_BLOCK_SIZE(¶m)) |
| / inode_ratio; |
| |
| /* |
| * Calculate number of blocks to reserve |
| */ |
| param.s_r_blocks_count = (param.s_blocks_count * reserved_ratio) / 100; |
| } |
| |
| int main (int argc, char *argv[]) |
| { |
| errcode_t retval = 0; |
| ext2_filsys fs; |
| badblocks_list bb_list = 0; |
| |
| PRS(argc, argv); |
| |
| check_mount(); |
| |
| /* |
| * Initialize the superblock.... |
| */ |
| retval = ext2fs_initialize(device_name, 0, ¶m, |
| unix_io_manager, &fs); |
| if (retval) { |
| com_err(device_name, retval, "while setting up superblock"); |
| exit(1); |
| } |
| |
| if (!quiet) |
| show_stats(fs); |
| |
| if (bad_blocks_filename) |
| read_bb_file(fs, &bb_list, bad_blocks_filename); |
| if (cflag) |
| test_disk(fs, &bb_list); |
| |
| handle_bad_blocks(fs, bb_list); |
| alloc_tables(fs); |
| if (super_only) { |
| fs->super->s_state |= EXT2_ERROR_FS; |
| fs->flags &= ~(EXT2_FLAG_IB_DIRTY|EXT2_FLAG_BB_DIRTY); |
| } else { |
| create_root_dir(fs); |
| create_lost_and_found(fs); |
| reserve_inodes(fs); |
| create_bad_block_inode(fs, bb_list); |
| zap_bootblock(fs); |
| } |
| |
| if (!quiet) |
| printf("Writing superblocks and " |
| "filesystem accounting information: "); |
| ext2fs_close(fs); |
| if (!quiet) |
| printf("done\n"); |
| return 0; |
| } |