| /* |
| * Code related to writing an iolog of what a thread is doing, and to |
| * later read that back and replay |
| */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <libgen.h> |
| #include <assert.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <unistd.h> |
| #ifdef CONFIG_ZLIB |
| #include <zlib.h> |
| #endif |
| |
| #include "flist.h" |
| #include "fio.h" |
| #include "verify.h" |
| #include "trim.h" |
| #include "filelock.h" |
| #include "lib/tp.h" |
| |
| static const char iolog_ver2[] = "fio version 2 iolog"; |
| |
| void queue_io_piece(struct thread_data *td, struct io_piece *ipo) |
| { |
| flist_add_tail(&ipo->list, &td->io_log_list); |
| td->total_io_size += ipo->len; |
| } |
| |
| void log_io_u(const struct thread_data *td, const struct io_u *io_u) |
| { |
| if (!td->o.write_iolog_file) |
| return; |
| |
| fprintf(td->iolog_f, "%s %s %llu %lu\n", io_u->file->file_name, |
| io_ddir_name(io_u->ddir), |
| io_u->offset, io_u->buflen); |
| } |
| |
| void log_file(struct thread_data *td, struct fio_file *f, |
| enum file_log_act what) |
| { |
| const char *act[] = { "add", "open", "close" }; |
| |
| assert(what < 3); |
| |
| if (!td->o.write_iolog_file) |
| return; |
| |
| |
| /* |
| * this happens on the pre-open/close done before the job starts |
| */ |
| if (!td->iolog_f) |
| return; |
| |
| fprintf(td->iolog_f, "%s %s\n", f->file_name, act[what]); |
| } |
| |
| static void iolog_delay(struct thread_data *td, unsigned long delay) |
| { |
| unsigned long usec = utime_since_now(&td->last_issue); |
| unsigned long this_delay; |
| |
| if (delay < usec) |
| return; |
| |
| delay -= usec; |
| |
| while (delay && !td->terminate) { |
| this_delay = delay; |
| if (this_delay > 500000) |
| this_delay = 500000; |
| |
| usec_sleep(td, this_delay); |
| delay -= this_delay; |
| } |
| } |
| |
| static int ipo_special(struct thread_data *td, struct io_piece *ipo) |
| { |
| struct fio_file *f; |
| int ret; |
| |
| /* |
| * Not a special ipo |
| */ |
| if (ipo->ddir != DDIR_INVAL) |
| return 0; |
| |
| f = td->files[ipo->fileno]; |
| |
| switch (ipo->file_action) { |
| case FIO_LOG_OPEN_FILE: |
| ret = td_io_open_file(td, f); |
| if (!ret) |
| break; |
| td_verror(td, ret, "iolog open file"); |
| return -1; |
| case FIO_LOG_CLOSE_FILE: |
| td_io_close_file(td, f); |
| break; |
| case FIO_LOG_UNLINK_FILE: |
| td_io_unlink_file(td, f); |
| break; |
| default: |
| log_err("fio: bad file action %d\n", ipo->file_action); |
| break; |
| } |
| |
| return 1; |
| } |
| |
| int read_iolog_get(struct thread_data *td, struct io_u *io_u) |
| { |
| struct io_piece *ipo; |
| unsigned long elapsed; |
| |
| while (!flist_empty(&td->io_log_list)) { |
| int ret; |
| |
| ipo = flist_first_entry(&td->io_log_list, struct io_piece, list); |
| flist_del(&ipo->list); |
| remove_trim_entry(td, ipo); |
| |
| ret = ipo_special(td, ipo); |
| if (ret < 0) { |
| free(ipo); |
| break; |
| } else if (ret > 0) { |
| free(ipo); |
| continue; |
| } |
| |
| io_u->ddir = ipo->ddir; |
| if (ipo->ddir != DDIR_WAIT) { |
| io_u->offset = ipo->offset; |
| io_u->buflen = ipo->len; |
| io_u->file = td->files[ipo->fileno]; |
| get_file(io_u->file); |
| dprint(FD_IO, "iolog: get %llu/%lu/%s\n", io_u->offset, |
| io_u->buflen, io_u->file->file_name); |
| if (ipo->delay) |
| iolog_delay(td, ipo->delay); |
| } else { |
| elapsed = mtime_since_genesis(); |
| if (ipo->delay > elapsed) |
| usec_sleep(td, (ipo->delay - elapsed) * 1000); |
| } |
| |
| free(ipo); |
| |
| if (io_u->ddir != DDIR_WAIT) |
| return 0; |
| } |
| |
| td->done = 1; |
| return 1; |
| } |
| |
| void prune_io_piece_log(struct thread_data *td) |
| { |
| struct io_piece *ipo; |
| struct rb_node *n; |
| |
| while ((n = rb_first(&td->io_hist_tree)) != NULL) { |
| ipo = rb_entry(n, struct io_piece, rb_node); |
| rb_erase(n, &td->io_hist_tree); |
| remove_trim_entry(td, ipo); |
| td->io_hist_len--; |
| free(ipo); |
| } |
| |
| while (!flist_empty(&td->io_hist_list)) { |
| ipo = flist_first_entry(&td->io_hist_list, struct io_piece, list); |
| flist_del(&ipo->list); |
| remove_trim_entry(td, ipo); |
| td->io_hist_len--; |
| free(ipo); |
| } |
| } |
| |
| /* |
| * log a successful write, so we can unwind the log for verify |
| */ |
| void log_io_piece(struct thread_data *td, struct io_u *io_u) |
| { |
| struct rb_node **p, *parent; |
| struct io_piece *ipo, *__ipo; |
| |
| ipo = malloc(sizeof(struct io_piece)); |
| init_ipo(ipo); |
| ipo->file = io_u->file; |
| ipo->offset = io_u->offset; |
| ipo->len = io_u->buflen; |
| ipo->numberio = io_u->numberio; |
| ipo->flags = IP_F_IN_FLIGHT; |
| |
| io_u->ipo = ipo; |
| |
| if (io_u_should_trim(td, io_u)) { |
| flist_add_tail(&ipo->trim_list, &td->trim_list); |
| td->trim_entries++; |
| } |
| |
| /* |
| * We don't need to sort the entries, if: |
| * |
| * Sequential writes, or |
| * Random writes that lay out the file as it goes along |
| * |
| * For both these cases, just reading back data in the order we |
| * wrote it out is the fastest. |
| * |
| * One exception is if we don't have a random map AND we are doing |
| * verifies, in that case we need to check for duplicate blocks and |
| * drop the old one, which we rely on the rb insert/lookup for |
| * handling. |
| */ |
| if (((!td->o.verifysort) || !td_random(td) || !td->o.overwrite) && |
| (file_randommap(td, ipo->file) || td->o.verify == VERIFY_NONE)) { |
| INIT_FLIST_HEAD(&ipo->list); |
| flist_add_tail(&ipo->list, &td->io_hist_list); |
| ipo->flags |= IP_F_ONLIST; |
| td->io_hist_len++; |
| return; |
| } |
| |
| RB_CLEAR_NODE(&ipo->rb_node); |
| |
| /* |
| * Sort the entry into the verification list |
| */ |
| restart: |
| p = &td->io_hist_tree.rb_node; |
| parent = NULL; |
| while (*p) { |
| parent = *p; |
| |
| __ipo = rb_entry(parent, struct io_piece, rb_node); |
| if (ipo->file < __ipo->file) |
| p = &(*p)->rb_left; |
| else if (ipo->file > __ipo->file) |
| p = &(*p)->rb_right; |
| else if (ipo->offset < __ipo->offset) |
| p = &(*p)->rb_left; |
| else if (ipo->offset > __ipo->offset) |
| p = &(*p)->rb_right; |
| else { |
| dprint(FD_IO, "iolog: overlap %llu/%lu, %llu/%lu", |
| __ipo->offset, __ipo->len, |
| ipo->offset, ipo->len); |
| td->io_hist_len--; |
| rb_erase(parent, &td->io_hist_tree); |
| remove_trim_entry(td, __ipo); |
| free(__ipo); |
| goto restart; |
| } |
| } |
| |
| rb_link_node(&ipo->rb_node, parent, p); |
| rb_insert_color(&ipo->rb_node, &td->io_hist_tree); |
| ipo->flags |= IP_F_ONRB; |
| td->io_hist_len++; |
| } |
| |
| void unlog_io_piece(struct thread_data *td, struct io_u *io_u) |
| { |
| struct io_piece *ipo = io_u->ipo; |
| |
| if (!ipo) |
| return; |
| |
| if (ipo->flags & IP_F_ONRB) |
| rb_erase(&ipo->rb_node, &td->io_hist_tree); |
| else if (ipo->flags & IP_F_ONLIST) |
| flist_del(&ipo->list); |
| |
| free(ipo); |
| io_u->ipo = NULL; |
| td->io_hist_len--; |
| } |
| |
| void trim_io_piece(struct thread_data *td, const struct io_u *io_u) |
| { |
| struct io_piece *ipo = io_u->ipo; |
| |
| if (!ipo) |
| return; |
| |
| ipo->len = io_u->xfer_buflen - io_u->resid; |
| } |
| |
| void write_iolog_close(struct thread_data *td) |
| { |
| fflush(td->iolog_f); |
| fclose(td->iolog_f); |
| free(td->iolog_buf); |
| td->iolog_f = NULL; |
| td->iolog_buf = NULL; |
| } |
| |
| /* |
| * Read version 2 iolog data. It is enhanced to include per-file logging, |
| * syncs, etc. |
| */ |
| static int read_iolog2(struct thread_data *td, FILE *f) |
| { |
| unsigned long long offset; |
| unsigned int bytes; |
| int reads, writes, waits, fileno = 0, file_action = 0; /* stupid gcc */ |
| char *fname, *act; |
| char *str, *p; |
| enum fio_ddir rw; |
| |
| free_release_files(td); |
| |
| /* |
| * Read in the read iolog and store it, reuse the infrastructure |
| * for doing verifications. |
| */ |
| str = malloc(4096); |
| fname = malloc(256+16); |
| act = malloc(256+16); |
| |
| reads = writes = waits = 0; |
| while ((p = fgets(str, 4096, f)) != NULL) { |
| struct io_piece *ipo; |
| int r; |
| |
| r = sscanf(p, "%256s %256s %llu %u", fname, act, &offset, |
| &bytes); |
| if (r == 4) { |
| /* |
| * Check action first |
| */ |
| if (!strcmp(act, "wait")) |
| rw = DDIR_WAIT; |
| else if (!strcmp(act, "read")) |
| rw = DDIR_READ; |
| else if (!strcmp(act, "write")) |
| rw = DDIR_WRITE; |
| else if (!strcmp(act, "sync")) |
| rw = DDIR_SYNC; |
| else if (!strcmp(act, "datasync")) |
| rw = DDIR_DATASYNC; |
| else if (!strcmp(act, "trim")) |
| rw = DDIR_TRIM; |
| else { |
| log_err("fio: bad iolog file action: %s\n", |
| act); |
| continue; |
| } |
| fileno = get_fileno(td, fname); |
| } else if (r == 2) { |
| rw = DDIR_INVAL; |
| if (!strcmp(act, "add")) { |
| fileno = add_file(td, fname, 0, 1); |
| file_action = FIO_LOG_ADD_FILE; |
| continue; |
| } else if (!strcmp(act, "open")) { |
| fileno = get_fileno(td, fname); |
| file_action = FIO_LOG_OPEN_FILE; |
| } else if (!strcmp(act, "close")) { |
| fileno = get_fileno(td, fname); |
| file_action = FIO_LOG_CLOSE_FILE; |
| } else { |
| log_err("fio: bad iolog file action: %s\n", |
| act); |
| continue; |
| } |
| } else { |
| log_err("bad iolog2: %s", p); |
| continue; |
| } |
| |
| if (rw == DDIR_READ) |
| reads++; |
| else if (rw == DDIR_WRITE) { |
| /* |
| * Don't add a write for ro mode |
| */ |
| if (read_only) |
| continue; |
| writes++; |
| } else if (rw == DDIR_WAIT) { |
| waits++; |
| } else if (rw == DDIR_INVAL) { |
| } else if (!ddir_sync(rw)) { |
| log_err("bad ddir: %d\n", rw); |
| continue; |
| } |
| |
| /* |
| * Make note of file |
| */ |
| ipo = malloc(sizeof(*ipo)); |
| init_ipo(ipo); |
| ipo->ddir = rw; |
| if (rw == DDIR_WAIT) { |
| ipo->delay = offset; |
| } else { |
| ipo->offset = offset; |
| ipo->len = bytes; |
| if (rw != DDIR_INVAL && bytes > td->o.max_bs[rw]) |
| td->o.max_bs[rw] = bytes; |
| ipo->fileno = fileno; |
| ipo->file_action = file_action; |
| td->o.size += bytes; |
| } |
| |
| queue_io_piece(td, ipo); |
| } |
| |
| free(str); |
| free(act); |
| free(fname); |
| |
| if (writes && read_only) { |
| log_err("fio: <%s> skips replay of %d writes due to" |
| " read-only\n", td->o.name, writes); |
| writes = 0; |
| } |
| |
| if (!reads && !writes && !waits) |
| return 1; |
| else if (reads && !writes) |
| td->o.td_ddir = TD_DDIR_READ; |
| else if (!reads && writes) |
| td->o.td_ddir = TD_DDIR_WRITE; |
| else |
| td->o.td_ddir = TD_DDIR_RW; |
| |
| return 0; |
| } |
| |
| /* |
| * open iolog, check version, and call appropriate parser |
| */ |
| static int init_iolog_read(struct thread_data *td) |
| { |
| char buffer[256], *p; |
| FILE *f; |
| int ret; |
| |
| f = fopen(td->o.read_iolog_file, "r"); |
| if (!f) { |
| perror("fopen read iolog"); |
| return 1; |
| } |
| |
| p = fgets(buffer, sizeof(buffer), f); |
| if (!p) { |
| td_verror(td, errno, "iolog read"); |
| log_err("fio: unable to read iolog\n"); |
| fclose(f); |
| return 1; |
| } |
| |
| /* |
| * version 2 of the iolog stores a specific string as the |
| * first line, check for that |
| */ |
| if (!strncmp(iolog_ver2, buffer, strlen(iolog_ver2))) |
| ret = read_iolog2(td, f); |
| else { |
| log_err("fio: iolog version 1 is no longer supported\n"); |
| ret = 1; |
| } |
| |
| fclose(f); |
| return ret; |
| } |
| |
| /* |
| * Set up a log for storing io patterns. |
| */ |
| static int init_iolog_write(struct thread_data *td) |
| { |
| struct fio_file *ff; |
| FILE *f; |
| unsigned int i; |
| |
| f = fopen(td->o.write_iolog_file, "a"); |
| if (!f) { |
| perror("fopen write iolog"); |
| return 1; |
| } |
| |
| /* |
| * That's it for writing, setup a log buffer and we're done. |
| */ |
| td->iolog_f = f; |
| td->iolog_buf = malloc(8192); |
| setvbuf(f, td->iolog_buf, _IOFBF, 8192); |
| |
| /* |
| * write our version line |
| */ |
| if (fprintf(f, "%s\n", iolog_ver2) < 0) { |
| perror("iolog init\n"); |
| return 1; |
| } |
| |
| /* |
| * add all known files |
| */ |
| for_each_file(td, ff, i) |
| log_file(td, ff, FIO_LOG_ADD_FILE); |
| |
| return 0; |
| } |
| |
| int init_iolog(struct thread_data *td) |
| { |
| int ret = 0; |
| |
| if (td->o.read_iolog_file) { |
| int need_swap; |
| |
| /* |
| * Check if it's a blktrace file and load that if possible. |
| * Otherwise assume it's a normal log file and load that. |
| */ |
| if (is_blktrace(td->o.read_iolog_file, &need_swap)) |
| ret = load_blktrace(td, td->o.read_iolog_file, need_swap); |
| else |
| ret = init_iolog_read(td); |
| } else if (td->o.write_iolog_file) |
| ret = init_iolog_write(td); |
| |
| if (ret) |
| td_verror(td, EINVAL, "failed initializing iolog"); |
| |
| return ret; |
| } |
| |
| void setup_log(struct io_log **log, struct log_params *p, |
| const char *filename) |
| { |
| struct io_log *l; |
| |
| l = calloc(1, sizeof(*l)); |
| l->nr_samples = 0; |
| l->max_samples = 1024; |
| l->log_type = p->log_type; |
| l->log_offset = p->log_offset; |
| l->log_gz = p->log_gz; |
| l->log_gz_store = p->log_gz_store; |
| l->log = malloc(l->max_samples * log_entry_sz(l)); |
| l->avg_msec = p->avg_msec; |
| l->filename = strdup(filename); |
| l->td = p->td; |
| |
| if (l->log_offset) |
| l->log_ddir_mask = LOG_OFFSET_SAMPLE_BIT; |
| |
| INIT_FLIST_HEAD(&l->chunk_list); |
| |
| if (l->log_gz && !p->td) |
| l->log_gz = 0; |
| else if (l->log_gz) { |
| pthread_mutex_init(&l->chunk_lock, NULL); |
| p->td->flags |= TD_F_COMPRESS_LOG; |
| } |
| |
| *log = l; |
| } |
| |
| #ifdef CONFIG_SETVBUF |
| static void *set_file_buffer(FILE *f) |
| { |
| size_t size = 1048576; |
| void *buf; |
| |
| buf = malloc(size); |
| setvbuf(f, buf, _IOFBF, size); |
| return buf; |
| } |
| |
| static void clear_file_buffer(void *buf) |
| { |
| free(buf); |
| } |
| #else |
| static void *set_file_buffer(FILE *f) |
| { |
| return NULL; |
| } |
| |
| static void clear_file_buffer(void *buf) |
| { |
| } |
| #endif |
| |
| void free_log(struct io_log *log) |
| { |
| free(log->log); |
| free(log->filename); |
| free(log); |
| } |
| |
| static void flush_samples(FILE *f, void *samples, uint64_t sample_size) |
| { |
| struct io_sample *s; |
| int log_offset; |
| uint64_t i, nr_samples; |
| |
| if (!sample_size) |
| return; |
| |
| s = __get_sample(samples, 0, 0); |
| log_offset = (s->__ddir & LOG_OFFSET_SAMPLE_BIT) != 0; |
| |
| nr_samples = sample_size / __log_entry_sz(log_offset); |
| |
| for (i = 0; i < nr_samples; i++) { |
| s = __get_sample(samples, log_offset, i); |
| |
| if (!log_offset) { |
| fprintf(f, "%lu, %lu, %u, %u\n", |
| (unsigned long) s->time, |
| (unsigned long) s->val, |
| io_sample_ddir(s), s->bs); |
| } else { |
| struct io_sample_offset *so = (void *) s; |
| |
| fprintf(f, "%lu, %lu, %u, %u, %llu\n", |
| (unsigned long) s->time, |
| (unsigned long) s->val, |
| io_sample_ddir(s), s->bs, |
| (unsigned long long) so->offset); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_ZLIB |
| |
| struct iolog_flush_data { |
| struct tp_work work; |
| struct io_log *log; |
| void *samples; |
| uint64_t nr_samples; |
| }; |
| |
| struct iolog_compress { |
| struct flist_head list; |
| void *buf; |
| size_t len; |
| unsigned int seq; |
| }; |
| |
| #define GZ_CHUNK 131072 |
| |
| static struct iolog_compress *get_new_chunk(unsigned int seq) |
| { |
| struct iolog_compress *c; |
| |
| c = malloc(sizeof(*c)); |
| INIT_FLIST_HEAD(&c->list); |
| c->buf = malloc(GZ_CHUNK); |
| c->len = 0; |
| c->seq = seq; |
| return c; |
| } |
| |
| static void free_chunk(struct iolog_compress *ic) |
| { |
| free(ic->buf); |
| free(ic); |
| } |
| |
| static int z_stream_init(z_stream *stream, int gz_hdr) |
| { |
| int wbits = 15; |
| |
| stream->zalloc = Z_NULL; |
| stream->zfree = Z_NULL; |
| stream->opaque = Z_NULL; |
| stream->next_in = Z_NULL; |
| |
| /* |
| * zlib magic - add 32 for auto-detection of gz header or not, |
| * if we decide to store files in a gzip friendly format. |
| */ |
| if (gz_hdr) |
| wbits += 32; |
| |
| if (inflateInit2(stream, wbits) != Z_OK) |
| return 1; |
| |
| return 0; |
| } |
| |
| struct inflate_chunk_iter { |
| unsigned int seq; |
| int err; |
| void *buf; |
| size_t buf_size; |
| size_t buf_used; |
| size_t chunk_sz; |
| }; |
| |
| static void finish_chunk(z_stream *stream, FILE *f, |
| struct inflate_chunk_iter *iter) |
| { |
| int ret; |
| |
| ret = inflateEnd(stream); |
| if (ret != Z_OK) |
| log_err("fio: failed to end log inflation (%d)\n", ret); |
| |
| flush_samples(f, iter->buf, iter->buf_used); |
| free(iter->buf); |
| iter->buf = NULL; |
| iter->buf_size = iter->buf_used = 0; |
| } |
| |
| /* |
| * Iterative chunk inflation. Handles cases where we cross into a new |
| * sequence, doing flush finish of previous chunk if needed. |
| */ |
| static size_t inflate_chunk(struct iolog_compress *ic, int gz_hdr, FILE *f, |
| z_stream *stream, struct inflate_chunk_iter *iter) |
| { |
| size_t ret; |
| |
| dprint(FD_COMPRESS, "inflate chunk size=%lu, seq=%u", |
| (unsigned long) ic->len, ic->seq); |
| |
| if (ic->seq != iter->seq) { |
| if (iter->seq) |
| finish_chunk(stream, f, iter); |
| |
| z_stream_init(stream, gz_hdr); |
| iter->seq = ic->seq; |
| } |
| |
| stream->avail_in = ic->len; |
| stream->next_in = ic->buf; |
| |
| if (!iter->buf_size) { |
| iter->buf_size = iter->chunk_sz; |
| iter->buf = malloc(iter->buf_size); |
| } |
| |
| while (stream->avail_in) { |
| size_t this_out = iter->buf_size - iter->buf_used; |
| int err; |
| |
| stream->avail_out = this_out; |
| stream->next_out = iter->buf + iter->buf_used; |
| |
| err = inflate(stream, Z_NO_FLUSH); |
| if (err < 0) { |
| log_err("fio: failed inflating log: %d\n", err); |
| iter->err = err; |
| break; |
| } |
| |
| iter->buf_used += this_out - stream->avail_out; |
| |
| if (!stream->avail_out) { |
| iter->buf_size += iter->chunk_sz; |
| iter->buf = realloc(iter->buf, iter->buf_size); |
| continue; |
| } |
| |
| if (err == Z_STREAM_END) |
| break; |
| } |
| |
| ret = (void *) stream->next_in - ic->buf; |
| |
| dprint(FD_COMPRESS, "inflated to size=%lu\n", (unsigned long) ret); |
| |
| return ret; |
| } |
| |
| /* |
| * Inflate stored compressed chunks, or write them directly to the log |
| * file if so instructed. |
| */ |
| static int inflate_gz_chunks(struct io_log *log, FILE *f) |
| { |
| struct inflate_chunk_iter iter = { .chunk_sz = log->log_gz, }; |
| z_stream stream; |
| |
| while (!flist_empty(&log->chunk_list)) { |
| struct iolog_compress *ic; |
| |
| ic = flist_first_entry(&log->chunk_list, struct iolog_compress, list); |
| flist_del(&ic->list); |
| |
| if (log->log_gz_store) { |
| size_t ret; |
| |
| dprint(FD_COMPRESS, "log write chunk size=%lu, " |
| "seq=%u\n", (unsigned long) ic->len, ic->seq); |
| |
| ret = fwrite(ic->buf, ic->len, 1, f); |
| if (ret != 1 || ferror(f)) { |
| iter.err = errno; |
| log_err("fio: error writing compressed log\n"); |
| } |
| } else |
| inflate_chunk(ic, log->log_gz_store, f, &stream, &iter); |
| |
| free_chunk(ic); |
| } |
| |
| if (iter.seq) { |
| finish_chunk(&stream, f, &iter); |
| free(iter.buf); |
| } |
| |
| return iter.err; |
| } |
| |
| /* |
| * Open compressed log file and decompress the stored chunks and |
| * write them to stdout. The chunks are stored sequentially in the |
| * file, so we iterate over them and do them one-by-one. |
| */ |
| int iolog_file_inflate(const char *file) |
| { |
| struct inflate_chunk_iter iter = { .chunk_sz = 64 * 1024 * 1024, }; |
| struct iolog_compress ic; |
| z_stream stream; |
| struct stat sb; |
| ssize_t ret; |
| size_t total; |
| void *buf; |
| FILE *f; |
| |
| f = fopen(file, "r"); |
| if (!f) { |
| perror("fopen"); |
| return 1; |
| } |
| |
| if (stat(file, &sb) < 0) { |
| fclose(f); |
| perror("stat"); |
| return 1; |
| } |
| |
| ic.buf = buf = malloc(sb.st_size); |
| ic.len = sb.st_size; |
| ic.seq = 1; |
| |
| ret = fread(ic.buf, ic.len, 1, f); |
| if (ret < 0) { |
| perror("fread"); |
| fclose(f); |
| return 1; |
| } else if (ret != 1) { |
| log_err("fio: short read on reading log\n"); |
| fclose(f); |
| return 1; |
| } |
| |
| fclose(f); |
| |
| /* |
| * Each chunk will return Z_STREAM_END. We don't know how many |
| * chunks are in the file, so we just keep looping and incrementing |
| * the sequence number until we have consumed the whole compressed |
| * file. |
| */ |
| total = ic.len; |
| do { |
| size_t iret; |
| |
| iret = inflate_chunk(&ic, 1, stdout, &stream, &iter); |
| total -= iret; |
| if (!total) |
| break; |
| if (iter.err) |
| break; |
| |
| ic.seq++; |
| ic.len -= iret; |
| ic.buf += iret; |
| } while (1); |
| |
| if (iter.seq) { |
| finish_chunk(&stream, stdout, &iter); |
| free(iter.buf); |
| } |
| |
| free(buf); |
| return iter.err; |
| } |
| |
| #else |
| |
| static int inflate_gz_chunks(struct io_log *log, FILE *f) |
| { |
| return 0; |
| } |
| |
| int iolog_file_inflate(const char *file) |
| { |
| log_err("fio: log inflation not possible without zlib\n"); |
| return 1; |
| } |
| |
| #endif |
| |
| void flush_log(struct io_log *log) |
| { |
| void *buf; |
| FILE *f; |
| |
| f = fopen(log->filename, "w"); |
| if (!f) { |
| perror("fopen log"); |
| return; |
| } |
| |
| buf = set_file_buffer(f); |
| |
| inflate_gz_chunks(log, f); |
| |
| flush_samples(f, log->log, log->nr_samples * log_entry_sz(log)); |
| |
| fclose(f); |
| clear_file_buffer(buf); |
| } |
| |
| static int finish_log(struct thread_data *td, struct io_log *log, int trylock) |
| { |
| if (td->tp_data) |
| iolog_flush(log, 1); |
| |
| if (trylock) { |
| if (fio_trylock_file(log->filename)) |
| return 1; |
| } else |
| fio_lock_file(log->filename); |
| |
| if (td->client_type == FIO_CLIENT_TYPE_GUI) |
| fio_send_iolog(td, log, log->filename); |
| else |
| flush_log(log); |
| |
| fio_unlock_file(log->filename); |
| free_log(log); |
| return 0; |
| } |
| |
| #ifdef CONFIG_ZLIB |
| |
| /* |
| * Invoked from our compress helper thread, when logging would have exceeded |
| * the specified memory limitation. Compresses the previously stored |
| * entries. |
| */ |
| static int gz_work(struct tp_work *work) |
| { |
| struct iolog_flush_data *data; |
| struct iolog_compress *c; |
| struct flist_head list; |
| unsigned int seq; |
| z_stream stream; |
| size_t total = 0; |
| int ret; |
| |
| INIT_FLIST_HEAD(&list); |
| |
| data = container_of(work, struct iolog_flush_data, work); |
| |
| stream.zalloc = Z_NULL; |
| stream.zfree = Z_NULL; |
| stream.opaque = Z_NULL; |
| |
| ret = deflateInit(&stream, Z_DEFAULT_COMPRESSION); |
| if (ret != Z_OK) { |
| log_err("fio: failed to init gz stream\n"); |
| return 0; |
| } |
| |
| seq = ++data->log->chunk_seq; |
| |
| stream.next_in = (void *) data->samples; |
| stream.avail_in = data->nr_samples * log_entry_sz(data->log); |
| |
| dprint(FD_COMPRESS, "deflate input size=%lu, seq=%u\n", |
| (unsigned long) stream.avail_in, seq); |
| do { |
| c = get_new_chunk(seq); |
| stream.avail_out = GZ_CHUNK; |
| stream.next_out = c->buf; |
| ret = deflate(&stream, Z_NO_FLUSH); |
| if (ret < 0) { |
| log_err("fio: deflate log (%d)\n", ret); |
| free_chunk(c); |
| goto err; |
| } |
| |
| c->len = GZ_CHUNK - stream.avail_out; |
| flist_add_tail(&c->list, &list); |
| total += c->len; |
| } while (stream.avail_in); |
| |
| stream.next_out = c->buf + c->len; |
| stream.avail_out = GZ_CHUNK - c->len; |
| |
| ret = deflate(&stream, Z_FINISH); |
| if (ret == Z_STREAM_END) |
| c->len = GZ_CHUNK - stream.avail_out; |
| else { |
| do { |
| c = get_new_chunk(seq); |
| stream.avail_out = GZ_CHUNK; |
| stream.next_out = c->buf; |
| ret = deflate(&stream, Z_FINISH); |
| c->len = GZ_CHUNK - stream.avail_out; |
| total += c->len; |
| flist_add_tail(&c->list, &list); |
| } while (ret != Z_STREAM_END); |
| } |
| |
| dprint(FD_COMPRESS, "deflated to size=%lu\n", (unsigned long) total); |
| |
| ret = deflateEnd(&stream); |
| if (ret != Z_OK) |
| log_err("fio: deflateEnd %d\n", ret); |
| |
| free(data->samples); |
| |
| if (!flist_empty(&list)) { |
| pthread_mutex_lock(&data->log->chunk_lock); |
| flist_splice_tail(&list, &data->log->chunk_list); |
| pthread_mutex_unlock(&data->log->chunk_lock); |
| } |
| |
| ret = 0; |
| done: |
| if (work->wait) { |
| work->done = 1; |
| pthread_cond_signal(&work->cv); |
| } else |
| free(data); |
| |
| return ret; |
| err: |
| while (!flist_empty(&list)) { |
| c = flist_first_entry(list.next, struct iolog_compress, list); |
| flist_del(&c->list); |
| free_chunk(c); |
| } |
| ret = 1; |
| goto done; |
| } |
| |
| /* |
| * Queue work item to compress the existing log entries. We copy the |
| * samples, and reset the log sample count to 0 (so the logging will |
| * continue to use the memory associated with the log). If called with |
| * wait == 1, will not return until the log compression has completed. |
| */ |
| int iolog_flush(struct io_log *log, int wait) |
| { |
| struct tp_data *tdat = log->td->tp_data; |
| struct iolog_flush_data *data; |
| size_t sample_size; |
| |
| data = malloc(sizeof(*data)); |
| if (!data) |
| return 1; |
| |
| data->log = log; |
| |
| sample_size = log->nr_samples * log_entry_sz(log); |
| data->samples = malloc(sample_size); |
| if (!data->samples) { |
| free(data); |
| return 1; |
| } |
| |
| memcpy(data->samples, log->log, sample_size); |
| data->nr_samples = log->nr_samples; |
| data->work.fn = gz_work; |
| log->nr_samples = 0; |
| |
| if (wait) { |
| pthread_mutex_init(&data->work.lock, NULL); |
| pthread_cond_init(&data->work.cv, NULL); |
| data->work.wait = 1; |
| } else |
| data->work.wait = 0; |
| |
| data->work.prio = 1; |
| tp_queue_work(tdat, &data->work); |
| |
| if (wait) { |
| pthread_mutex_lock(&data->work.lock); |
| while (!data->work.done) |
| pthread_cond_wait(&data->work.cv, &data->work.lock); |
| pthread_mutex_unlock(&data->work.lock); |
| free(data); |
| } |
| |
| return 0; |
| } |
| |
| #else |
| |
| int iolog_flush(struct io_log *log, int wait) |
| { |
| return 1; |
| } |
| |
| #endif |
| |
| static int write_iops_log(struct thread_data *td, int try) |
| { |
| struct io_log *log = td->iops_log; |
| |
| if (!log) |
| return 0; |
| |
| return finish_log(td, log, try); |
| } |
| |
| static int write_slat_log(struct thread_data *td, int try) |
| { |
| struct io_log *log = td->slat_log; |
| |
| if (!log) |
| return 0; |
| |
| return finish_log(td, log, try); |
| } |
| |
| static int write_clat_log(struct thread_data *td, int try) |
| { |
| struct io_log *log = td->clat_log; |
| |
| if (!log) |
| return 0; |
| |
| return finish_log(td, log, try); |
| } |
| |
| static int write_lat_log(struct thread_data *td, int try) |
| { |
| struct io_log *log = td->lat_log; |
| |
| if (!log) |
| return 0; |
| |
| return finish_log(td, log, try); |
| } |
| |
| static int write_bandw_log(struct thread_data *td, int try) |
| { |
| struct io_log *log = td->bw_log; |
| |
| if (!log) |
| return 0; |
| |
| return finish_log(td, log, try); |
| } |
| |
| enum { |
| BW_LOG_MASK = 1, |
| LAT_LOG_MASK = 2, |
| SLAT_LOG_MASK = 4, |
| CLAT_LOG_MASK = 8, |
| IOPS_LOG_MASK = 16, |
| |
| ALL_LOG_NR = 5, |
| }; |
| |
| struct log_type { |
| unsigned int mask; |
| int (*fn)(struct thread_data *, int); |
| }; |
| |
| static struct log_type log_types[] = { |
| { |
| .mask = BW_LOG_MASK, |
| .fn = write_bandw_log, |
| }, |
| { |
| .mask = LAT_LOG_MASK, |
| .fn = write_lat_log, |
| }, |
| { |
| .mask = SLAT_LOG_MASK, |
| .fn = write_slat_log, |
| }, |
| { |
| .mask = CLAT_LOG_MASK, |
| .fn = write_clat_log, |
| }, |
| { |
| .mask = IOPS_LOG_MASK, |
| .fn = write_iops_log, |
| }, |
| }; |
| |
| void fio_writeout_logs(struct thread_data *td) |
| { |
| unsigned int log_mask = 0; |
| unsigned int log_left = ALL_LOG_NR; |
| int old_state, i; |
| |
| old_state = td_bump_runstate(td, TD_FINISHING); |
| |
| finalize_logs(td); |
| |
| while (log_left) { |
| int prev_log_left = log_left; |
| |
| for (i = 0; i < ALL_LOG_NR && log_left; i++) { |
| struct log_type *lt = &log_types[i]; |
| int ret; |
| |
| if (!(log_mask & lt->mask)) { |
| ret = lt->fn(td, log_left != 1); |
| if (!ret) { |
| log_left--; |
| log_mask |= lt->mask; |
| } |
| } |
| } |
| |
| if (prev_log_left == log_left) |
| usleep(5000); |
| } |
| |
| td_restore_runstate(td, old_state); |
| } |