| /* Shared library add-on to iptables to add limit support. |
| * |
| * Jérôme de Vivie <devivie@info.enserb.u-bordeaux.fr> |
| * Hervé Eychenne <rv@wallfire.org> |
| */ |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #include <getopt.h> |
| #include <ip6tables.h> |
| #include <stddef.h> |
| #include <linux/netfilter_ipv6/ip6_tables.h> |
| /* For 64bit kernel / 32bit userspace */ |
| #include "../include/linux/netfilter_ipv6/ip6t_limit.h" |
| |
| #define IP6T_LIMIT_AVG "3/hour" |
| #define IP6T_LIMIT_BURST 5 |
| |
| /* Function which prints out usage message. */ |
| static void |
| help(void) |
| { |
| printf( |
| "limit v%s options:\n" |
| "--limit avg max average match rate: default "IP6T_LIMIT_AVG"\n" |
| " [Packets per second unless followed by \n" |
| " /sec /minute /hour /day postfixes]\n" |
| "--limit-burst number number to match in a burst, default %u\n" |
| "\n", IPTABLES_VERSION, IP6T_LIMIT_BURST); |
| } |
| |
| static struct option opts[] = { |
| { "limit", 1, 0, '%' }, |
| { "limit-burst", 1, 0, '$' }, |
| { 0 } |
| }; |
| |
| static |
| int parse_rate(const char *rate, u_int32_t *val) |
| { |
| const char *delim; |
| u_int32_t r; |
| u_int32_t mult = 1; /* Seconds by default. */ |
| |
| delim = strchr(rate, '/'); |
| if (delim) { |
| if (strlen(delim+1) == 0) |
| return 0; |
| |
| if (strncasecmp(delim+1, "second", strlen(delim+1)) == 0) |
| mult = 1; |
| else if (strncasecmp(delim+1, "minute", strlen(delim+1)) == 0) |
| mult = 60; |
| else if (strncasecmp(delim+1, "hour", strlen(delim+1)) == 0) |
| mult = 60*60; |
| else if (strncasecmp(delim+1, "day", strlen(delim+1)) == 0) |
| mult = 24*60*60; |
| else |
| return 0; |
| } |
| r = atoi(rate); |
| if (!r) |
| return 0; |
| |
| /* This would get mapped to infinite (1/day is minimum they |
| can specify, so we're ok at that end). */ |
| if (r / mult > IP6T_LIMIT_SCALE) |
| exit_error(PARAMETER_PROBLEM, "Rate too fast `%s'\n", rate); |
| |
| *val = IP6T_LIMIT_SCALE * mult / r; |
| return 1; |
| } |
| |
| /* Initialize the match. */ |
| static void |
| init(struct xt_entry_match *m, unsigned int *nfcache) |
| { |
| struct ip6t_rateinfo *r = (struct ip6t_rateinfo *)m->data; |
| |
| parse_rate(IP6T_LIMIT_AVG, &r->avg); |
| r->burst = IP6T_LIMIT_BURST; |
| |
| } |
| |
| /* FIXME: handle overflow: |
| if (r->avg*r->burst/r->burst != r->avg) |
| exit_error(PARAMETER_PROBLEM, |
| "Sorry: burst too large for that avg rate.\n"); |
| */ |
| |
| /* Function which parses command options; returns true if it |
| ate an option */ |
| static int |
| parse(int c, char **argv, int invert, unsigned int *flags, |
| const void *entry, |
| unsigned int *nfcache, |
| struct xt_entry_match **match) |
| { |
| struct ip6t_rateinfo *r = (struct ip6t_rateinfo *)(*match)->data; |
| unsigned int num; |
| |
| switch(c) { |
| case '%': |
| if (check_inverse(argv[optind-1], &invert, &optind, 0)) break; |
| if (!parse_rate(optarg, &r->avg)) |
| exit_error(PARAMETER_PROBLEM, |
| "bad rate `%s'", optarg); |
| break; |
| |
| case '$': |
| if (check_inverse(argv[optind-1], &invert, &optind, 0)) break; |
| if (string_to_number(optarg, 0, 10000, &num) == -1) |
| exit_error(PARAMETER_PROBLEM, |
| "bad --limit-burst `%s'", optarg); |
| r->burst = num; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| if (invert) |
| exit_error(PARAMETER_PROBLEM, |
| "limit does not support invert"); |
| |
| return 1; |
| } |
| |
| /* Final check; nothing. */ |
| static void final_check(unsigned int flags) |
| { |
| } |
| |
| static struct rates |
| { |
| const char *name; |
| u_int32_t mult; |
| } rates[] = { { "day", IP6T_LIMIT_SCALE*24*60*60 }, |
| { "hour", IP6T_LIMIT_SCALE*60*60 }, |
| { "min", IP6T_LIMIT_SCALE*60 }, |
| { "sec", IP6T_LIMIT_SCALE } }; |
| |
| static void print_rate(u_int32_t period) |
| { |
| unsigned int i; |
| |
| for (i = 1; i < sizeof(rates)/sizeof(struct rates); i++) { |
| if (period > rates[i].mult |
| || rates[i].mult % period != 0) |
| break; |
| } |
| |
| printf("%u/%s ", rates[i-1].mult / period, rates[i-1].name); |
| } |
| |
| /* Prints out the matchinfo. */ |
| static void |
| print(const void *ip, |
| const struct xt_entry_match *match, |
| int numeric) |
| { |
| struct ip6t_rateinfo *r = (struct ip6t_rateinfo *)match->data; |
| printf("limit: avg "); print_rate(r->avg); |
| printf("burst %u ", r->burst); |
| } |
| |
| /* FIXME: Make minimalist: only print rate if not default --RR */ |
| static void save(const void *ip, const struct xt_entry_match *match) |
| { |
| struct ip6t_rateinfo *r = (struct ip6t_rateinfo *)match->data; |
| |
| printf("--limit "); print_rate(r->avg); |
| if (r->burst != IP6T_LIMIT_BURST) |
| printf("--limit-burst %u ", r->burst); |
| } |
| |
| static struct ip6tables_match limit = { |
| .name = "limit", |
| .version = IPTABLES_VERSION, |
| .size = IP6T_ALIGN(sizeof(struct ip6t_rateinfo)), |
| .userspacesize = offsetof(struct ip6t_rateinfo, prev), |
| .help = &help, |
| .init = &init, |
| .parse = &parse, |
| .final_check = &final_check, |
| .print = &print, |
| .save = &save, |
| .extra_opts = opts, |
| }; |
| |
| void _init(void) |
| { |
| register_match6(&limit); |
| } |