source/Target/Process.cpp

//===-- Process.cpp ---------------------------------------------*- C++ -*-===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//

#include "lldb/Target/Process.h"

#include "lldb/lldb-private-log.h"

#include "lldb/Breakpoint/StoppointCallbackContext.h"
#include "lldb/Breakpoint/BreakpointLocation.h"
#include "lldb/Core/Event.h"
#include "lldb/Core/ConnectionFileDescriptor.h"
#include "lldb/Core/Debugger.h"
#include "lldb/Core/InputReader.h"
#include "lldb/Core/Log.h"
#include "lldb/Core/PluginManager.h"
#include "lldb/Core/State.h"
#include "lldb/Expression/ClangUserExpression.h"
#include "lldb/Interpreter/CommandInterpreter.h"
#include "lldb/Host/Host.h"
#include "lldb/Target/ABI.h"
#include "lldb/Target/DynamicLoader.h"
#include "lldb/Target/LanguageRuntime.h"
#include "lldb/Target/CPPLanguageRuntime.h"
#include "lldb/Target/ObjCLanguageRuntime.h"
#include "lldb/Target/Platform.h"
#include "lldb/Target/RegisterContext.h"
#include "lldb/Target/StopInfo.h"
#include "lldb/Target/Target.h"
#include "lldb/Target/TargetList.h"
#include "lldb/Target/Thread.h"
#include "lldb/Target/ThreadPlan.h"

using namespace lldb;
using namespace lldb_private;

void
ProcessInstanceInfo::Dump (Stream &s, Platform *platform) const
{
    const char *cstr;
    if (m_pid != LLDB_INVALID_PROCESS_ID)       
        s.Printf ("    pid = %i\n", m_pid);

    if (m_parent_pid != LLDB_INVALID_PROCESS_ID)
        s.Printf (" parent = %i\n", m_parent_pid);

    if (m_executable)
    {
        s.Printf ("   name = %s\n", m_executable.GetFilename().GetCString());
        s.PutCString ("   file = ");
        m_executable.Dump(&s);
        s.EOL();
    }
    const uint32_t argc = m_arguments.GetArgumentCount();
    if (argc > 0)
    {
        for (uint32_t i=0; i<argc; i++)
        {
            const char *arg = m_arguments.GetArgumentAtIndex(i);
            if (i < 10)
                s.Printf (" arg[%u] = %s\n", i, arg);
            else
                s.Printf ("arg[%u] = %s\n", i, arg);
        }
    }

    const uint32_t envc = m_environment.GetArgumentCount();
    if (envc > 0)
    {
        for (uint32_t i=0; i<envc; i++)
        {
            const char *env = m_environment.GetArgumentAtIndex(i);
            if (i < 10)
                s.Printf (" env[%u] = %s\n", i, env);
            else
                s.Printf ("env[%u] = %s\n", i, env);
        }
    }

    if (m_arch.IsValid())                       
        s.Printf ("   arch = %s\n", m_arch.GetTriple().str().c_str());

    if (m_uid != UINT32_MAX)
    {
        cstr = platform->GetUserName (m_uid);
        s.Printf ("    uid = %-5u (%s)\n", m_uid, cstr ? cstr : "");
    }
    if (m_gid != UINT32_MAX)
    {
        cstr = platform->GetGroupName (m_gid);
        s.Printf ("    gid = %-5u (%s)\n", m_gid, cstr ? cstr : "");
    }
    if (m_euid != UINT32_MAX)
    {
        cstr = platform->GetUserName (m_euid);
        s.Printf ("   euid = %-5u (%s)\n", m_euid, cstr ? cstr : "");
    }
    if (m_egid != UINT32_MAX)
    {
        cstr = platform->GetGroupName (m_egid);
        s.Printf ("   egid = %-5u (%s)\n", m_egid, cstr ? cstr : "");
    }
}

void
ProcessInstanceInfo::DumpTableHeader (Stream &s, Platform *platform, bool show_args, bool verbose)
{
    const char *label;
    if (show_args || verbose)
        label = "ARGUMENTS";
    else
        label = "NAME";

    if (verbose)
    {
        s.Printf     ("PID    PARENT USER       GROUP      EFF USER   EFF GROUP  TRIPLE                   %s\n", label);
        s.PutCString ("====== ====== ========== ========== ========== ========== ======================== ============================\n");
    }
    else
    {
        s.Printf     ("PID    PARENT USER       ARCH    %s\n", label);
        s.PutCString ("====== ====== ========== ======= ============================\n");
    }
}

void
ProcessInstanceInfo::DumpAsTableRow (Stream &s, Platform *platform, bool show_args, bool verbose) const
{
    if (m_pid != LLDB_INVALID_PROCESS_ID)
    {
        const char *cstr;
        s.Printf ("%-6u %-6u ", m_pid, m_parent_pid);

    
        if (verbose)
        {
            cstr = platform->GetUserName (m_uid);
            if (cstr && cstr[0]) // Watch for empty string that indicates lookup failed
                s.Printf ("%-10s ", cstr);
            else
                s.Printf ("%-10u ", m_uid);

            cstr = platform->GetGroupName (m_gid);
            if (cstr && cstr[0]) // Watch for empty string that indicates lookup failed
                s.Printf ("%-10s ", cstr);
            else
                s.Printf ("%-10u ", m_gid);

            cstr = platform->GetUserName (m_euid);
            if (cstr && cstr[0]) // Watch for empty string that indicates lookup failed
                s.Printf ("%-10s ", cstr);
            else
                s.Printf ("%-10u ", m_euid);
            
            cstr = platform->GetGroupName (m_egid);
            if (cstr && cstr[0]) // Watch for empty string that indicates lookup failed
                s.Printf ("%-10s ", cstr);
            else
                s.Printf ("%-10u ", m_egid);
            s.Printf ("%-24s ", m_arch.IsValid() ? m_arch.GetTriple().str().c_str() : "");
        }
        else
        {
            s.Printf ("%-10s %.*-7s ", 
                      platform->GetUserName (m_euid),
                      (int)m_arch.GetTriple().getArchName().size(),
                      m_arch.GetTriple().getArchName().data());
        }

        if (verbose || show_args)
        {
            const uint32_t argc = m_arguments.GetArgumentCount();
            if (argc > 0)
            {
                for (uint32_t i=0; i<argc; i++)
                {
                    if (i > 0)
                        s.PutChar (' ');
                    s.PutCString (m_arguments.GetArgumentAtIndex(i));
                }
            }
        }
        else
        {
            s.PutCString (GetName());
        }

        s.EOL();
    }
}


void
ProcessInfo::SetArgumentsFromArgs (const Args& args, 
                                       bool first_arg_is_executable,
                                       bool first_arg_is_executable_and_argument)
{
    // Copy all arguments
    m_arguments = args;

    // Is the first argument the executable?
    if (first_arg_is_executable)
    {
        const char *first_arg = args.GetArgumentAtIndex (0);
        if (first_arg)
        {
            // Yes the first argument is an executable, set it as the executable
            // in the launch options. Don't resolve the file path as the path
            // could be a remote platform path
            const bool resolve = false;
            m_executable.SetFile(first_arg, resolve); 
    
            // If argument zero is an executable and shouldn't be included
            // in the arguments, remove it from the front of the arguments
            if (first_arg_is_executable_and_argument == false)
                m_arguments.DeleteArgumentAtIndex (0);
        }
    }
}

bool
ProcessLaunchInfo::FileAction::Open (int fd, const char *path, bool read, bool write)
{
    if ((read || write) && fd >= 0 && path && path[0])
    {
        m_action = eFileActionOpen;
        m_fd = fd;
        if (read && write)
            m_arg = O_RDWR;
        else if (read)
            m_arg = O_RDONLY;
        else
            m_arg = O_WRONLY;
        m_path.assign (path);
        return true;
    }
    else
    {
        Clear();
    }
    return false;
}

bool
ProcessLaunchInfo::FileAction::Close (int fd)
{
    Clear();
    if (fd >= 0)
    {
        m_action = eFileActionClose;
        m_fd = fd;
    }
    return m_fd >= 0;
}


bool
ProcessLaunchInfo::FileAction::Duplicate (int fd, int dup_fd)
{
    Clear();
    if (fd >= 0 && dup_fd >= 0)
    {
        m_action = eFileActionDuplicate;
        m_fd = fd;
        m_arg = dup_fd;
    }
    return m_fd >= 0;
}



bool
ProcessLaunchInfo::FileAction::AddPosixSpawnFileAction (posix_spawn_file_actions_t *file_actions,
                                                        const FileAction *info,
                                                        Log *log, 
                                                        Error& error)
{
    if (info == NULL)
        return false;

    switch (info->m_action)
    {
        case eFileActionNone:
            error.Clear();
            break;

        case eFileActionClose:
            if (info->m_fd == -1)
                error.SetErrorString ("invalid fd for posix_spawn_file_actions_addclose(...)");
            else
            {
                error.SetError (::posix_spawn_file_actions_addclose (file_actions, info->m_fd), 
                                eErrorTypePOSIX);
                if (log && (error.Fail() || log))
                    error.PutToLog(log, "posix_spawn_file_actions_addclose (action=%p, fd=%i)", 
                                   file_actions, info->m_fd);
            }
            break;

        case eFileActionDuplicate:
            if (info->m_fd == -1)
                error.SetErrorString ("invalid fd for posix_spawn_file_actions_adddup2(...)");
            else if (info->m_arg == -1)
                error.SetErrorString ("invalid duplicate fd for posix_spawn_file_actions_adddup2(...)");
            else
            {
                error.SetError (::posix_spawn_file_actions_adddup2 (file_actions, info->m_fd, info->m_arg),
                                eErrorTypePOSIX);
                if (log && (error.Fail() || log))
                    error.PutToLog(log, "posix_spawn_file_actions_adddup2 (action=%p, fd=%i, dup_fd=%i)", 
                                   file_actions, info->m_fd, info->m_arg);
            }
            break;

        case eFileActionOpen:
            if (info->m_fd == -1)
                error.SetErrorString ("invalid fd in posix_spawn_file_actions_addopen(...)");
            else
            {
                int oflag = info->m_arg;
                mode_t mode = 0;

                error.SetError (::posix_spawn_file_actions_addopen (file_actions, 
                                                                    info->m_fd,
                                                                    info->m_path.c_str(), 
                                                                    oflag,
                                                                    mode), 
                                eErrorTypePOSIX);
                if (error.Fail() || log)
                    error.PutToLog(log, 
                                   "posix_spawn_file_actions_addopen (action=%p, fd=%i, path='%s', oflag=%i, mode=%i)", 
                                   file_actions, info->m_fd, info->m_path.c_str(), oflag, mode);
            }
            break;
        
        default:
            error.SetErrorStringWithFormat ("invalid file action: %i", info->m_action);
            break;
    }
    return error.Success();
}

Error
ProcessLaunchCommandOptions::SetOptionValue (uint32_t option_idx, const char *option_arg)
{
    Error error;
    char short_option = (char) m_getopt_table[option_idx].val;
    
    switch (short_option)
    {
        case 's':   // Stop at program entry point
            launch_info.GetFlags().Set (eLaunchFlagStopAtEntry); 
            break;
            
        case 'e':   // STDERR for read + write
            {   
                ProcessLaunchInfo::FileAction action;
                if (action.Open(STDERR_FILENO, option_arg, true, true))
                    launch_info.AppendFileAction (action);
            }
            break;
            
        case 'i':   // STDIN for read only
            {   
                ProcessLaunchInfo::FileAction action;
                if (action.Open(STDIN_FILENO, option_arg, true, false))
                    launch_info.AppendFileAction (action);
            }
            break;
            
        case 'o':   // Open STDOUT for write only
            {   
                ProcessLaunchInfo::FileAction action;
                if (action.Open(STDOUT_FILENO, option_arg, false, true))
                    launch_info.AppendFileAction (action);
            }
            break;
            
        case 'p':   // Process plug-in name
            launch_info.SetProcessPluginName (option_arg);    
            break;
            
        case 'n':   // Disable STDIO
            {
                ProcessLaunchInfo::FileAction action;
                if (action.Open(STDERR_FILENO, "/dev/null", true, true))
                    launch_info.AppendFileAction (action);
                if (action.Open(STDOUT_FILENO, "/dev/null", false, true))
                    launch_info.AppendFileAction (action);
                if (action.Open(STDIN_FILENO, "/dev/null", true, false))
                    launch_info.AppendFileAction (action);
            }
            break;
            
        case 'w': 
            launch_info.SetWorkingDirectory (option_arg);    
            break;
            
        case 't':   // Open process in new terminal window
            launch_info.GetFlags().Set (eLaunchFlagLaunchInTTY); 
            break;
            
        case 'a':
            launch_info.GetArchitecture().SetTriple (option_arg, 
                                                     m_interpreter.GetPlatform(true).get());
            break;
            
        case 'A':   
            launch_info.GetFlags().Set (eLaunchFlagDisableASLR); 
            break;
            
        case 'v':
            launch_info.GetEnvironmentEntries().AppendArgument(option_arg);
            break;

        default:
            error.SetErrorStringWithFormat("Invalid short option character '%c'.\n", short_option);
            break;
            
    }
    return error;
}

OptionDefinition
ProcessLaunchCommandOptions::g_option_table[] =
{
{ LLDB_OPT_SET_ALL, false, "stop-at-entry", 's', no_argument,       NULL, 0, eArgTypeNone,          "Stop at the entry point of the program when launching a process."},
{ LLDB_OPT_SET_ALL, false, "disable-aslr",  'A', no_argument,       NULL, 0, eArgTypeNone,          "Disable address space layout randomization when launching a process."},
{ LLDB_OPT_SET_ALL, false, "plugin",        'p', required_argument, NULL, 0, eArgTypePlugin,        "Name of the process plugin you want to use."},
{ LLDB_OPT_SET_ALL, false, "working-dir",   'w', required_argument, NULL, 0, eArgTypePath,          "Set the current working directory to <path> when running the inferior."},
{ LLDB_OPT_SET_ALL, false, "arch",          'a', required_argument, NULL, 0, eArgTypeArchitecture,  "Set the architecture for the process to launch when ambiguous."},
{ LLDB_OPT_SET_ALL, false, "environment",   'v', required_argument, NULL, 0, eArgTypeNone,          "Specify an environment variable name/value stirng (--environement NAME=VALUE). Can be specified multiple times for subsequent environment entries."},

{ LLDB_OPT_SET_1  , false, "stdin",         'i', required_argument, NULL, 0, eArgTypePath,    "Redirect stdin for the process to <path>."},
{ LLDB_OPT_SET_1  , false, "stdout",        'o', required_argument, NULL, 0, eArgTypePath,    "Redirect stdout for the process to <path>."},
{ LLDB_OPT_SET_1  , false, "stderr",        'e', required_argument, NULL, 0, eArgTypePath,    "Redirect stderr for the process to <path>."},

{ LLDB_OPT_SET_2  , false, "tty",           't', no_argument,       NULL, 0, eArgTypeNone,    "Start the process in a terminal (not supported on all platforms)."},

{ LLDB_OPT_SET_3  , false, "no-stdio",      'n', no_argument,       NULL, 0, eArgTypeNone,    "Do not set up for terminal I/O to go to running process."},

{ 0               , false, NULL,             0,  0,                 NULL, 0, eArgTypeNone,    NULL }
};



bool
ProcessInstanceInfoMatch::NameMatches (const char *process_name) const
{
    if (m_name_match_type == eNameMatchIgnore || process_name == NULL)
        return true;
    const char *match_name = m_match_info.GetName();
    if (!match_name)
        return true;
    
    return lldb_private::NameMatches (process_name, m_name_match_type, match_name);
}

bool
ProcessInstanceInfoMatch::Matches (const ProcessInstanceInfo &proc_info) const
{
    if (!NameMatches (proc_info.GetName()))
        return false;

    if (m_match_info.ProcessIDIsValid() &&
        m_match_info.GetProcessID() != proc_info.GetProcessID())
        return false;

    if (m_match_info.ParentProcessIDIsValid() &&
        m_match_info.GetParentProcessID() != proc_info.GetParentProcessID())
        return false;

    if (m_match_info.UserIDIsValid () && 
        m_match_info.GetUserID() != proc_info.GetUserID())
        return false;
    
    if (m_match_info.GroupIDIsValid () && 
        m_match_info.GetGroupID() != proc_info.GetGroupID())
        return false;
    
    if (m_match_info.EffectiveUserIDIsValid () && 
        m_match_info.GetEffectiveUserID() != proc_info.GetEffectiveUserID())
        return false;
    
    if (m_match_info.EffectiveGroupIDIsValid () && 
        m_match_info.GetEffectiveGroupID() != proc_info.GetEffectiveGroupID())
        return false;
    
    if (m_match_info.GetArchitecture().IsValid() && 
        m_match_info.GetArchitecture() != proc_info.GetArchitecture())
        return false;
    return true;
}

bool
ProcessInstanceInfoMatch::MatchAllProcesses () const
{
    if (m_name_match_type != eNameMatchIgnore)
        return false;
    
    if (m_match_info.ProcessIDIsValid())
        return false;
    
    if (m_match_info.ParentProcessIDIsValid())
        return false;
    
    if (m_match_info.UserIDIsValid ())
        return false;
    
    if (m_match_info.GroupIDIsValid ())
        return false;
    
    if (m_match_info.EffectiveUserIDIsValid ())
        return false;
    
    if (m_match_info.EffectiveGroupIDIsValid ())
        return false;
    
    if (m_match_info.GetArchitecture().IsValid())
        return false;

    if (m_match_all_users)
        return false;

    return true;

}

void
ProcessInstanceInfoMatch::Clear()
{
    m_match_info.Clear();
    m_name_match_type = eNameMatchIgnore;
    m_match_all_users = false;
}

Process*
Process::FindPlugin (Target &target, const char *plugin_name, Listener &listener)
{
    ProcessCreateInstance create_callback = NULL;
    if (plugin_name)
    {
        create_callback  = PluginManager::GetProcessCreateCallbackForPluginName (plugin_name);
        if (create_callback)
        {
            std::auto_ptr<Process> debugger_ap(create_callback(target, listener));
            if (debugger_ap->CanDebug(target))
                return debugger_ap.release();
        }
    }
    else
    {
        for (uint32_t idx = 0; (create_callback = PluginManager::GetProcessCreateCallbackAtIndex(idx)) != NULL; ++idx)
        {
            std::auto_ptr<Process> debugger_ap(create_callback(target, listener));
            if (debugger_ap->CanDebug(target))
                return debugger_ap.release();
        }
    }
    return NULL;
}


//----------------------------------------------------------------------
// Process constructor
//----------------------------------------------------------------------
Process::Process(Target &target, Listener &listener) :
    UserID (LLDB_INVALID_PROCESS_ID),
    Broadcaster ("lldb.process"),
    ProcessInstanceSettings (*GetSettingsController()),
    m_target (target),
    m_public_state (eStateUnloaded),
    m_private_state (eStateUnloaded),
    m_private_state_broadcaster ("lldb.process.internal_state_broadcaster"),
    m_private_state_control_broadcaster ("lldb.process.internal_state_control_broadcaster"),
    m_private_state_listener ("lldb.process.internal_state_listener"),
    m_private_state_control_wait(),
    m_private_state_thread (LLDB_INVALID_HOST_THREAD),
    m_stop_id (0),
    m_thread_index_id (0),
    m_exit_status (-1),
    m_exit_string (),
    m_thread_list (this),
    m_notifications (),
    m_image_tokens (),
    m_listener (listener),
    m_breakpoint_site_list (),
    m_dynamic_checkers_ap (),
    m_unix_signals (),
    m_abi_sp (),
    m_process_input_reader (),
    m_stdio_communication ("process.stdio"),
    m_stdio_communication_mutex (Mutex::eMutexTypeRecursive),
    m_stdout_data (),
    m_memory_cache (*this),
    m_allocated_memory_cache (*this),
    m_next_event_action_ap()
{
    UpdateInstanceName();

    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_OBJECT));
    if (log)
        log->Printf ("%p Process::Process()", this);

    SetEventName (eBroadcastBitStateChanged, "state-changed");
    SetEventName (eBroadcastBitInterrupt, "interrupt");
    SetEventName (eBroadcastBitSTDOUT, "stdout-available");
    SetEventName (eBroadcastBitSTDERR, "stderr-available");
    
    listener.StartListeningForEvents (this,
                                      eBroadcastBitStateChanged |
                                      eBroadcastBitInterrupt |
                                      eBroadcastBitSTDOUT |
                                      eBroadcastBitSTDERR);

    m_private_state_listener.StartListeningForEvents(&m_private_state_broadcaster,
                                                     eBroadcastBitStateChanged);

    m_private_state_listener.StartListeningForEvents(&m_private_state_control_broadcaster,
                                                     eBroadcastInternalStateControlStop |
                                                     eBroadcastInternalStateControlPause |
                                                     eBroadcastInternalStateControlResume);
}

//----------------------------------------------------------------------
// Destructor
//----------------------------------------------------------------------
Process::~Process()
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_OBJECT));
    if (log)
        log->Printf ("%p Process::~Process()", this);
    StopPrivateStateThread();
}

void
Process::Finalize()
{
    // Do any cleanup needed prior to being destructed... Subclasses
    // that override this method should call this superclass method as well.
    
    // We need to destroy the loader before the derived Process class gets destroyed
    // since it is very likely that undoing the loader will require access to the real process.
    if (m_dyld_ap.get() != NULL)
        m_dyld_ap.reset();
}

void
Process::RegisterNotificationCallbacks (const Notifications& callbacks)
{
    m_notifications.push_back(callbacks);
    if (callbacks.initialize != NULL)
        callbacks.initialize (callbacks.baton, this);
}

bool
Process::UnregisterNotificationCallbacks(const Notifications& callbacks)
{
    std::vector<Notifications>::iterator pos, end = m_notifications.end();
    for (pos = m_notifications.begin(); pos != end; ++pos)
    {
        if (pos->baton == callbacks.baton &&
            pos->initialize == callbacks.initialize &&
            pos->process_state_changed == callbacks.process_state_changed)
        {
            m_notifications.erase(pos);
            return true;
        }
    }
    return false;
}

void
Process::SynchronouslyNotifyStateChanged (StateType state)
{
    std::vector<Notifications>::iterator notification_pos, notification_end = m_notifications.end();
    for (notification_pos = m_notifications.begin(); notification_pos != notification_end; ++notification_pos)
    {
        if (notification_pos->process_state_changed)
            notification_pos->process_state_changed (notification_pos->baton, this, state);
    }
}

// FIXME: We need to do some work on events before the general Listener sees them.
// For instance if we are continuing from a breakpoint, we need to ensure that we do
// the little "insert real insn, step & stop" trick.  But we can't do that when the
// event is delivered by the broadcaster - since that is done on the thread that is
// waiting for new events, so if we needed more than one event for our handling, we would
// stall.  So instead we do it when we fetch the event off of the queue.
//

StateType
Process::GetNextEvent (EventSP &event_sp)
{
    StateType state = eStateInvalid;

    if (m_listener.GetNextEventForBroadcaster (this, event_sp) && event_sp)
        state = Process::ProcessEventData::GetStateFromEvent (event_sp.get());

    return state;
}


StateType
Process::WaitForProcessToStop (const TimeValue *timeout)
{
    StateType match_states[] = { eStateStopped, eStateCrashed, eStateDetached, eStateExited, eStateUnloaded };
    return WaitForState (timeout, match_states, sizeof(match_states) / sizeof(StateType));
}


StateType
Process::WaitForState
(
    const TimeValue *timeout,
    const StateType *match_states, const uint32_t num_match_states
)
{
    EventSP event_sp;
    uint32_t i;
    StateType state = GetState();
    while (state != eStateInvalid)
    {
        // If we are exited or detached, we won't ever get back to any
        // other valid state...
        if (state == eStateDetached || state == eStateExited)
            return state;

        state = WaitForStateChangedEvents (timeout, event_sp);

        for (i=0; i<num_match_states; ++i)
        {
            if (match_states[i] == state)
                return state;
        }
    }
    return state;
}

bool
Process::HijackProcessEvents (Listener *listener)
{
    if (listener != NULL)
    {
        return HijackBroadcaster(listener, eBroadcastBitStateChanged);
    }
    else
        return false;
}

void
Process::RestoreProcessEvents ()
{
    RestoreBroadcaster();
}

bool
Process::HijackPrivateProcessEvents (Listener *listener)
{
    if (listener != NULL)
    {
        return m_private_state_broadcaster.HijackBroadcaster(listener, eBroadcastBitStateChanged);
    }
    else
        return false;
}

void
Process::RestorePrivateProcessEvents ()
{
    m_private_state_broadcaster.RestoreBroadcaster();
}

StateType
Process::WaitForStateChangedEvents (const TimeValue *timeout, EventSP &event_sp)
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

    if (log)
        log->Printf ("Process::%s (timeout = %p, event_sp)...", __FUNCTION__, timeout);

    StateType state = eStateInvalid;
    if (m_listener.WaitForEventForBroadcasterWithType (timeout,
                                                       this,
                                                       eBroadcastBitStateChanged,
                                                       event_sp))
        state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());

    if (log)
        log->Printf ("Process::%s (timeout = %p, event_sp) => %s",
                     __FUNCTION__,
                     timeout,
                     StateAsCString(state));
    return state;
}

Event *
Process::PeekAtStateChangedEvents ()
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

    if (log)
        log->Printf ("Process::%s...", __FUNCTION__);

    Event *event_ptr;
    event_ptr = m_listener.PeekAtNextEventForBroadcasterWithType (this,
                                                                  eBroadcastBitStateChanged);
    if (log)
    {
        if (event_ptr)
        {
            log->Printf ("Process::%s (event_ptr) => %s",
                         __FUNCTION__,
                         StateAsCString(ProcessEventData::GetStateFromEvent (event_ptr)));
        }
        else 
        {
            log->Printf ("Process::%s no events found",
                         __FUNCTION__);
        }
    }
    return event_ptr;
}

StateType
Process::WaitForStateChangedEventsPrivate (const TimeValue *timeout, EventSP &event_sp)
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

    if (log)
        log->Printf ("Process::%s (timeout = %p, event_sp)...", __FUNCTION__, timeout);

    StateType state = eStateInvalid;
    if (m_private_state_listener.WaitForEventForBroadcasterWithType (timeout,
                                                                     &m_private_state_broadcaster,
                                                                     eBroadcastBitStateChanged,
                                                                     event_sp))
        state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());

    // This is a bit of a hack, but when we wait here we could very well return
    // to the command-line, and that could disable the log, which would render the
    // log we got above invalid.
    if (log)
    {
        if (state == eStateInvalid)
            log->Printf ("Process::%s (timeout = %p, event_sp) => TIMEOUT", __FUNCTION__, timeout);
        else
            log->Printf ("Process::%s (timeout = %p, event_sp) => %s", __FUNCTION__, timeout, StateAsCString(state));
    }
    return state;
}

bool
Process::WaitForEventsPrivate (const TimeValue *timeout, EventSP &event_sp, bool control_only)
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

    if (log)
        log->Printf ("Process::%s (timeout = %p, event_sp)...", __FUNCTION__, timeout);

    if (control_only)
        return m_private_state_listener.WaitForEventForBroadcaster(timeout, &m_private_state_control_broadcaster, event_sp);
    else
        return m_private_state_listener.WaitForEvent(timeout, event_sp);
}

bool
Process::IsRunning () const
{
    return StateIsRunningState (m_public_state.GetValue());
}

int
Process::GetExitStatus ()
{
    if (m_public_state.GetValue() == eStateExited)
        return m_exit_status;
    return -1;
}


void
Process::ProcessInstanceSettings::GetHostEnvironmentIfNeeded ()
{
    if (m_inherit_host_env && !m_got_host_env)
    {
        m_got_host_env = true;
        StringList host_env;
        const size_t host_env_count = Host::GetEnvironment (host_env);
        for (size_t idx=0; idx<host_env_count; idx++)
        {
            const char *env_entry = host_env.GetStringAtIndex (idx);
            if (env_entry)
            {
                const char *equal_pos = ::strchr(env_entry, '=');
                if (equal_pos)
                {
                    std::string key (env_entry, equal_pos - env_entry);
                    std::string value (equal_pos + 1);
                    if (m_env_vars.find (key) == m_env_vars.end())
                        m_env_vars[key] = value;
                }
            }
        }
    }
}


size_t
Process::ProcessInstanceSettings::GetEnvironmentAsArgs (Args &env)
{
    GetHostEnvironmentIfNeeded ();

    dictionary::const_iterator pos, end = m_env_vars.end();
    for (pos = m_env_vars.begin(); pos != end; ++pos)
    {
        std::string env_var_equal_value (pos->first);
        env_var_equal_value.append(1, '=');
        env_var_equal_value.append (pos->second);
        env.AppendArgument (env_var_equal_value.c_str());
    }
    return env.GetArgumentCount();
}


const char *
Process::GetExitDescription ()
{
    if (m_public_state.GetValue() == eStateExited && !m_exit_string.empty())
        return m_exit_string.c_str();
    return NULL;
}

bool
Process::SetExitStatus (int status, const char *cstr)
{
    LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_STATE | LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf("Process::SetExitStatus (status=%i (0x%8.8x), description=%s%s%s)", 
                    status, status,
                    cstr ? "\"" : "",
                    cstr ? cstr : "NULL",
                    cstr ? "\"" : "");

    // We were already in the exited state
    if (m_private_state.GetValue() == eStateExited)
    {
        if (log)
            log->Printf("Process::SetExitStatus () ignoring exit status because state was already set to eStateExited");
        return false;
    }
    
    m_exit_status = status;
    if (cstr)
        m_exit_string = cstr;
    else
        m_exit_string.clear();

    DidExit ();

    SetPrivateState (eStateExited);
    return true;
}

// This static callback can be used to watch for local child processes on
// the current host. The the child process exits, the process will be
// found in the global target list (we want to be completely sure that the
// lldb_private::Process doesn't go away before we can deliver the signal.
bool
Process::SetProcessExitStatus
(
    void *callback_baton,
    lldb::pid_t pid,
    int signo,      // Zero for no signal
    int exit_status      // Exit value of process if signal is zero
)
{
    if (signo == 0 || exit_status)
    {
        TargetSP target_sp(Debugger::FindTargetWithProcessID (pid));
        if (target_sp)
        {
            ProcessSP process_sp (target_sp->GetProcessSP());
            if (process_sp)
            {
                const char *signal_cstr = NULL;
                if (signo)
                    signal_cstr = process_sp->GetUnixSignals().GetSignalAsCString (signo);

                process_sp->SetExitStatus (exit_status, signal_cstr);
            }
        }
        return true;
    }
    return false;
}


uint32_t
Process::GetNextThreadIndexID ()
{
    return ++m_thread_index_id;
}

StateType
Process::GetState()
{
    // If any other threads access this we will need a mutex for it
    return m_public_state.GetValue ();
}

void
Process::SetPublicState (StateType new_state)
{
    LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_STATE | LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf("Process::SetPublicState (%s)", StateAsCString(new_state));
    m_public_state.SetValue (new_state);
}

StateType
Process::GetPrivateState ()
{
    return m_private_state.GetValue();
}

void
Process::SetPrivateState (StateType new_state)
{
    LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_STATE | LIBLLDB_LOG_PROCESS));
    bool state_changed = false;

    if (log)
        log->Printf("Process::SetPrivateState (%s)", StateAsCString(new_state));

    Mutex::Locker locker(m_private_state.GetMutex());

    const StateType old_state = m_private_state.GetValueNoLock ();
    state_changed = old_state != new_state;
    if (state_changed)
    {
        m_private_state.SetValueNoLock (new_state);
        if (StateIsStoppedState(new_state))
        {
            m_stop_id++;
            m_memory_cache.Clear();
            if (log)
                log->Printf("Process::SetPrivateState (%s) stop_id = %u", StateAsCString(new_state), m_stop_id);
        }
        // Use our target to get a shared pointer to ourselves...
        m_private_state_broadcaster.BroadcastEvent (eBroadcastBitStateChanged, new ProcessEventData (GetTarget().GetProcessSP(), new_state));
    }
    else
    {
        if (log)
            log->Printf("Process::SetPrivateState (%s) state didn't change. Ignoring...", StateAsCString(new_state), StateAsCString(old_state));
    }
}


uint32_t
Process::GetStopID() const
{
    return m_stop_id;
}

addr_t
Process::GetImageInfoAddress()
{
    return LLDB_INVALID_ADDRESS;
}

//----------------------------------------------------------------------
// LoadImage
//
// This function provides a default implementation that works for most
// unix variants. Any Process subclasses that need to do shared library
// loading differently should override LoadImage and UnloadImage and
// do what is needed.
//----------------------------------------------------------------------
uint32_t
Process::LoadImage (const FileSpec &image_spec, Error &error)
{
    DynamicLoader *loader = GetDynamicLoader();
    if (loader)
    {
        error = loader->CanLoadImage();
        if (error.Fail())
            return LLDB_INVALID_IMAGE_TOKEN;
    }
    
    if (error.Success())
    {
        ThreadSP thread_sp(GetThreadList ().GetSelectedThread());
        if (thread_sp == NULL)
            thread_sp = GetThreadList ().GetThreadAtIndex(0, true);
        
        if (thread_sp)
        {
            StackFrameSP frame_sp (thread_sp->GetStackFrameAtIndex (0));
            
            if (frame_sp)
            {
                ExecutionContext exe_ctx;
                frame_sp->CalculateExecutionContext (exe_ctx);
                bool unwind_on_error = true;
                StreamString expr;
                char path[PATH_MAX];
                image_spec.GetPath(path, sizeof(path));
                expr.Printf("dlopen (\"%s\", 2)", path);
                const char *prefix = "extern \"C\" void* dlopen (const char *path, int mode);\n";
                lldb::ValueObjectSP result_valobj_sp;
                ClangUserExpression::Evaluate (exe_ctx, unwind_on_error, expr.GetData(), prefix, result_valobj_sp);
                if (result_valobj_sp->GetError().Success())
                {
                    Scalar scalar;
                    if (result_valobj_sp->ResolveValue (scalar))
                    {
                        addr_t image_ptr = scalar.ULongLong(LLDB_INVALID_ADDRESS);
                        if (image_ptr != 0 && image_ptr != LLDB_INVALID_ADDRESS)
                        {
                            uint32_t image_token = m_image_tokens.size();
                            m_image_tokens.push_back (image_ptr);
                            return image_token;
                        }
                    }
                }
            }
        }
    }
    return LLDB_INVALID_IMAGE_TOKEN;
}

//----------------------------------------------------------------------
// UnloadImage
//
// This function provides a default implementation that works for most
// unix variants. Any Process subclasses that need to do shared library
// loading differently should override LoadImage and UnloadImage and
// do what is needed.
//----------------------------------------------------------------------
Error
Process::UnloadImage (uint32_t image_token)
{
    Error error;
    if (image_token < m_image_tokens.size())
    {
        const addr_t image_addr = m_image_tokens[image_token];
        if (image_addr == LLDB_INVALID_ADDRESS)
        {
            error.SetErrorString("image already unloaded");
        }
        else
        {
            DynamicLoader *loader = GetDynamicLoader();
            if (loader)
                error = loader->CanLoadImage();
            
            if (error.Success())
            {
                ThreadSP thread_sp(GetThreadList ().GetSelectedThread());
                if (thread_sp == NULL)
                    thread_sp = GetThreadList ().GetThreadAtIndex(0, true);
                
                if (thread_sp)
                {
                    StackFrameSP frame_sp (thread_sp->GetStackFrameAtIndex (0));
                    
                    if (frame_sp)
                    {
                        ExecutionContext exe_ctx;
                        frame_sp->CalculateExecutionContext (exe_ctx);
                        bool unwind_on_error = true;
                        StreamString expr;
                        expr.Printf("dlclose ((void *)0x%llx)", image_addr);
                        const char *prefix = "extern \"C\" int dlclose(void* handle);\n";
                        lldb::ValueObjectSP result_valobj_sp;
                        ClangUserExpression::Evaluate (exe_ctx, unwind_on_error, expr.GetData(), prefix, result_valobj_sp);
                        if (result_valobj_sp->GetError().Success())
                        {
                            Scalar scalar;
                            if (result_valobj_sp->ResolveValue (scalar))
                            {
                                if (scalar.UInt(1))
                                {
                                    error.SetErrorStringWithFormat("expression failed: \"%s\"", expr.GetData());
                                }
                                else
                                {
                                    m_image_tokens[image_token] = LLDB_INVALID_ADDRESS;
                                }
                            }
                        }
                        else
                        {
                            error = result_valobj_sp->GetError();
                        }
                    }
                }
            }
        }
    }
    else
    {
        error.SetErrorString("invalid image token");
    }
    return error;
}

const lldb::ABISP &
Process::GetABI()
{
    if (!m_abi_sp)
        m_abi_sp = ABI::FindPlugin(m_target.GetArchitecture());
    return m_abi_sp;
}

LanguageRuntime *
Process::GetLanguageRuntime(lldb::LanguageType language)
{
    LanguageRuntimeCollection::iterator pos;
    pos = m_language_runtimes.find (language);
    if (pos == m_language_runtimes.end())
    {
        lldb::LanguageRuntimeSP runtime(LanguageRuntime::FindPlugin(this, language));
        
        m_language_runtimes[language] 
            = runtime;
        return runtime.get();
    }
    else
        return (*pos).second.get();
}

CPPLanguageRuntime *
Process::GetCPPLanguageRuntime ()
{
    LanguageRuntime *runtime = GetLanguageRuntime(eLanguageTypeC_plus_plus);
    if (runtime != NULL && runtime->GetLanguageType() == eLanguageTypeC_plus_plus)
        return static_cast<CPPLanguageRuntime *> (runtime);
    return NULL;
}

ObjCLanguageRuntime *
Process::GetObjCLanguageRuntime ()
{
    LanguageRuntime *runtime = GetLanguageRuntime(eLanguageTypeObjC);
    if (runtime != NULL && runtime->GetLanguageType() == eLanguageTypeObjC)
        return static_cast<ObjCLanguageRuntime *> (runtime);
    return NULL;
}

BreakpointSiteList &
Process::GetBreakpointSiteList()
{
    return m_breakpoint_site_list;
}

const BreakpointSiteList &
Process::GetBreakpointSiteList() const
{
    return m_breakpoint_site_list;
}


void
Process::DisableAllBreakpointSites ()
{
    m_breakpoint_site_list.SetEnabledForAll (false);
}

Error
Process::ClearBreakpointSiteByID (lldb::user_id_t break_id)
{
    Error error (DisableBreakpointSiteByID (break_id));
    
    if (error.Success())
        m_breakpoint_site_list.Remove(break_id);

    return error;
}

Error
Process::DisableBreakpointSiteByID (lldb::user_id_t break_id)
{
    Error error;
    BreakpointSiteSP bp_site_sp = m_breakpoint_site_list.FindByID (break_id);
    if (bp_site_sp)
    {
        if (bp_site_sp->IsEnabled())
            error = DisableBreakpoint (bp_site_sp.get());
    }
    else
    {
        error.SetErrorStringWithFormat("invalid breakpoint site ID: %i", break_id);
    }

    return error;
}

Error
Process::EnableBreakpointSiteByID (lldb::user_id_t break_id)
{
    Error error;
    BreakpointSiteSP bp_site_sp = m_breakpoint_site_list.FindByID (break_id);
    if (bp_site_sp)
    {
        if (!bp_site_sp->IsEnabled())
            error = EnableBreakpoint (bp_site_sp.get());
    }
    else
    {
        error.SetErrorStringWithFormat("invalid breakpoint site ID: %i", break_id);
    }
    return error;
}

lldb::break_id_t
Process::CreateBreakpointSite (BreakpointLocationSP &owner, bool use_hardware)
{
    const addr_t load_addr = owner->GetAddress().GetOpcodeLoadAddress (&m_target);
    if (load_addr != LLDB_INVALID_ADDRESS)
    {
        BreakpointSiteSP bp_site_sp;

        // Look up this breakpoint site.  If it exists, then add this new owner, otherwise
        // create a new breakpoint site and add it.

        bp_site_sp = m_breakpoint_site_list.FindByAddress (load_addr);

        if (bp_site_sp)
        {
            bp_site_sp->AddOwner (owner);
            owner->SetBreakpointSite (bp_site_sp);
            return bp_site_sp->GetID();
        }
        else
        {
            bp_site_sp.reset (new BreakpointSite (&m_breakpoint_site_list, owner, load_addr, LLDB_INVALID_THREAD_ID, use_hardware));
            if (bp_site_sp)
            {
                if (EnableBreakpoint (bp_site_sp.get()).Success())
                {
                    owner->SetBreakpointSite (bp_site_sp);
                    return m_breakpoint_site_list.Add (bp_site_sp);
                }
            }
        }
    }
    // We failed to enable the breakpoint
    return LLDB_INVALID_BREAK_ID;

}

void
Process::RemoveOwnerFromBreakpointSite (lldb::user_id_t owner_id, lldb::user_id_t owner_loc_id, BreakpointSiteSP &bp_site_sp)
{
    uint32_t num_owners = bp_site_sp->RemoveOwner (owner_id, owner_loc_id);
    if (num_owners == 0)
    {
        DisableBreakpoint(bp_site_sp.get());
        m_breakpoint_site_list.RemoveByAddress(bp_site_sp->GetLoadAddress());
    }
}


size_t
Process::RemoveBreakpointOpcodesFromBuffer (addr_t bp_addr, size_t size, uint8_t *buf) const
{
    size_t bytes_removed = 0;
    addr_t intersect_addr;
    size_t intersect_size;
    size_t opcode_offset;
    size_t idx;
    BreakpointSiteSP bp;

    for (idx = 0; (bp = m_breakpoint_site_list.GetByIndex(idx)) != NULL; ++idx)
    {
        if (bp->GetType() == BreakpointSite::eSoftware)
        {
            if (bp->IntersectsRange(bp_addr, size, &intersect_addr, &intersect_size, &opcode_offset))
            {
                assert(bp_addr <= intersect_addr && intersect_addr < bp_addr + size);
                assert(bp_addr < intersect_addr + intersect_size && intersect_addr + intersect_size <= bp_addr + size);
                assert(opcode_offset + intersect_size <= bp->GetByteSize());
                size_t buf_offset = intersect_addr - bp_addr;
                ::memcpy(buf + buf_offset, bp->GetSavedOpcodeBytes() + opcode_offset, intersect_size);
            }
        }
    }
    return bytes_removed;
}



size_t
Process::GetSoftwareBreakpointTrapOpcode (BreakpointSite* bp_site)
{
    PlatformSP platform_sp (m_target.GetPlatform());
    if (platform_sp)
        return platform_sp->GetSoftwareBreakpointTrapOpcode (m_target, bp_site);
    return 0;
}

Error
Process::EnableSoftwareBreakpoint (BreakpointSite *bp_site)
{
    Error error;
    assert (bp_site != NULL);
    LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_BREAKPOINTS));
    const addr_t bp_addr = bp_site->GetLoadAddress();
    if (log)
        log->Printf ("Process::EnableSoftwareBreakpoint (site_id = %d) addr = 0x%llx", bp_site->GetID(), (uint64_t)bp_addr);
    if (bp_site->IsEnabled())
    {
        if (log)
            log->Printf ("Process::EnableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- already enabled", bp_site->GetID(), (uint64_t)bp_addr);
        return error;
    }

    if (bp_addr == LLDB_INVALID_ADDRESS)
    {
        error.SetErrorString("BreakpointSite contains an invalid load address.");
        return error;
    }
    // Ask the lldb::Process subclass to fill in the correct software breakpoint
    // trap for the breakpoint site
    const size_t bp_opcode_size = GetSoftwareBreakpointTrapOpcode(bp_site);

    if (bp_opcode_size == 0)
    {
        error.SetErrorStringWithFormat ("Process::GetSoftwareBreakpointTrapOpcode() returned zero, unable to get breakpoint trap for address 0x%llx.\n", bp_addr);
    }
    else
    {
        const uint8_t * const bp_opcode_bytes = bp_site->GetTrapOpcodeBytes();

        if (bp_opcode_bytes == NULL)
        {
            error.SetErrorString ("BreakpointSite doesn't contain a valid breakpoint trap opcode.");
            return error;
        }

        // Save the original opcode by reading it
        if (DoReadMemory(bp_addr, bp_site->GetSavedOpcodeBytes(), bp_opcode_size, error) == bp_opcode_size)
        {
            // Write a software breakpoint in place of the original opcode
            if (DoWriteMemory(bp_addr, bp_opcode_bytes, bp_opcode_size, error) == bp_opcode_size)
            {
                uint8_t verify_bp_opcode_bytes[64];
                if (DoReadMemory(bp_addr, verify_bp_opcode_bytes, bp_opcode_size, error) == bp_opcode_size)
                {
                    if (::memcmp(bp_opcode_bytes, verify_bp_opcode_bytes, bp_opcode_size) == 0)
                    {
                        bp_site->SetEnabled(true);
                        bp_site->SetType (BreakpointSite::eSoftware);
                        if (log)
                            log->Printf ("Process::EnableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- SUCCESS",
                                         bp_site->GetID(),
                                         (uint64_t)bp_addr);
                    }
                    else
                        error.SetErrorString("Failed to verify the breakpoint trap in memory.");
                }
                else
                    error.SetErrorString("Unable to read memory to verify breakpoint trap.");
            }
            else
                error.SetErrorString("Unable to write breakpoint trap to memory.");
        }
        else
            error.SetErrorString("Unable to read memory at breakpoint address.");
    }
    if (log && error.Fail())
        log->Printf ("Process::EnableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- FAILED: %s",
                     bp_site->GetID(),
                     (uint64_t)bp_addr,
                     error.AsCString());
    return error;
}

Error
Process::DisableSoftwareBreakpoint (BreakpointSite *bp_site)
{
    Error error;
    assert (bp_site != NULL);
    LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_BREAKPOINTS));
    addr_t bp_addr = bp_site->GetLoadAddress();
    lldb::user_id_t breakID = bp_site->GetID();
    if (log)
        log->Printf ("Process::DisableBreakpoint (breakID = %d) addr = 0x%llx", breakID, (uint64_t)bp_addr);

    if (bp_site->IsHardware())
    {
        error.SetErrorString("Breakpoint site is a hardware breakpoint.");
    }
    else if (bp_site->IsEnabled())
    {
        const size_t break_op_size = bp_site->GetByteSize();
        const uint8_t * const break_op = bp_site->GetTrapOpcodeBytes();
        if (break_op_size > 0)
        {
            // Clear a software breakoint instruction
            uint8_t curr_break_op[8];
            assert (break_op_size <= sizeof(curr_break_op));
            bool break_op_found = false;

            // Read the breakpoint opcode
            if (DoReadMemory (bp_addr, curr_break_op, break_op_size, error) == break_op_size)
            {
                bool verify = false;
                // Make sure we have the a breakpoint opcode exists at this address
                if (::memcmp (curr_break_op, break_op, break_op_size) == 0)
                {
                    break_op_found = true;
                    // We found a valid breakpoint opcode at this address, now restore
                    // the saved opcode.
                    if (DoWriteMemory (bp_addr, bp_site->GetSavedOpcodeBytes(), break_op_size, error) == break_op_size)
                    {
                        verify = true;
                    }
                    else
                        error.SetErrorString("Memory write failed when restoring original opcode.");
                }
                else
                {
                    error.SetErrorString("Original breakpoint trap is no longer in memory.");
                    // Set verify to true and so we can check if the original opcode has already been restored
                    verify = true;
                }

                if (verify)
                {
                    uint8_t verify_opcode[8];
                    assert (break_op_size < sizeof(verify_opcode));
                    // Verify that our original opcode made it back to the inferior
                    if (DoReadMemory (bp_addr, verify_opcode, break_op_size, error) == break_op_size)
                    {
                        // compare the memory we just read with the original opcode
                        if (::memcmp (bp_site->GetSavedOpcodeBytes(), verify_opcode, break_op_size) == 0)
                        {
                            // SUCCESS
                            bp_site->SetEnabled(false);
                            if (log)
                                log->Printf ("Process::DisableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- SUCCESS", bp_site->GetID(), (uint64_t)bp_addr);
                            return error;
                        }
                        else
                        {
                            if (break_op_found)
                                error.SetErrorString("Failed to restore original opcode.");
                        }
                    }
                    else
                        error.SetErrorString("Failed to read memory to verify that breakpoint trap was restored.");
                }
            }
            else
                error.SetErrorString("Unable to read memory that should contain the breakpoint trap.");
        }
    }
    else
    {
        if (log)
            log->Printf ("Process::DisableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- already disabled", bp_site->GetID(), (uint64_t)bp_addr);
        return error;
    }

    if (log)
        log->Printf ("Process::DisableSoftwareBreakpoint (site_id = %d) addr = 0x%llx -- FAILED: %s",
                     bp_site->GetID(),
                     (uint64_t)bp_addr,
                     error.AsCString());
    return error;

}

// Comment out line below to disable memory caching
#define ENABLE_MEMORY_CACHING
// Uncomment to verify memory caching works after making changes to caching code
//#define VERIFY_MEMORY_READS

#if defined (ENABLE_MEMORY_CACHING)

#if defined (VERIFY_MEMORY_READS)

size_t
Process::ReadMemory (addr_t addr, void *buf, size_t size, Error &error)
{
    // Memory caching is enabled, with debug verification
    if (buf && size)
    {
        // Uncomment the line below to make sure memory caching is working.
        // I ran this through the test suite and got no assertions, so I am 
        // pretty confident this is working well. If any changes are made to
        // memory caching, uncomment the line below and test your changes!

        // Verify all memory reads by using the cache first, then redundantly
        // reading the same memory from the inferior and comparing to make sure
        // everything is exactly the same.
        std::string verify_buf (size, '\0');
        assert (verify_buf.size() == size);
        const size_t cache_bytes_read = m_memory_cache.Read (this, addr, buf, size, error);
        Error verify_error;
        const size_t verify_bytes_read = ReadMemoryFromInferior (addr, const_cast<char *>(verify_buf.data()), verify_buf.size(), verify_error);
        assert (cache_bytes_read == verify_bytes_read);
        assert (memcmp(buf, verify_buf.data(), verify_buf.size()) == 0);
        assert (verify_error.Success() == error.Success());
        return cache_bytes_read;
    }
    return 0;
}

#else   // #if defined (VERIFY_MEMORY_READS)

size_t
Process::ReadMemory (addr_t addr, void *buf, size_t size, Error &error)
{
    // Memory caching enabled, no verification
    return m_memory_cache.Read (addr, buf, size, error);
}

#endif  // #else for #if defined (VERIFY_MEMORY_READS)
    
#else   // #if defined (ENABLE_MEMORY_CACHING)

size_t
Process::ReadMemory (addr_t addr, void *buf, size_t size, Error &error)
{
    // Memory caching is disabled
    return ReadMemoryFromInferior (addr, buf, size, error);
}

#endif  // #else for #if defined (ENABLE_MEMORY_CACHING)


size_t
Process::ReadCStringFromMemory (addr_t addr, char *dst, size_t dst_max_len)
{
    size_t total_cstr_len = 0;
    if (dst && dst_max_len)
    {
        // NULL out everything just to be safe
        memset (dst, 0, dst_max_len);
        Error error;
        addr_t curr_addr = addr;
        const size_t cache_line_size = m_memory_cache.GetMemoryCacheLineSize();
        size_t bytes_left = dst_max_len - 1;
        char *curr_dst = dst;
        
        while (bytes_left > 0)
        {
            addr_t cache_line_bytes_left = cache_line_size - (curr_addr % cache_line_size);
            addr_t bytes_to_read = std::min<addr_t>(bytes_left, cache_line_bytes_left);
            size_t bytes_read = ReadMemory (curr_addr, curr_dst, bytes_to_read, error);
            
            if (bytes_read == 0)
            {
                dst[total_cstr_len] = '\0';
                break;
            }
            const size_t len = strlen(curr_dst);

            total_cstr_len += len;

            if (len < bytes_to_read)
                break;

            curr_dst += bytes_read;
            curr_addr += bytes_read;
            bytes_left -= bytes_read;
        }
    }
    return total_cstr_len;
}

size_t
Process::ReadMemoryFromInferior (addr_t addr, void *buf, size_t size, Error &error)
{
    if (buf == NULL || size == 0)
        return 0;

    size_t bytes_read = 0;
    uint8_t *bytes = (uint8_t *)buf;
    
    while (bytes_read < size)
    {
        const size_t curr_size = size - bytes_read;
        const size_t curr_bytes_read = DoReadMemory (addr + bytes_read, 
                                                     bytes + bytes_read, 
                                                     curr_size,
                                                     error);
        bytes_read += curr_bytes_read;
        if (curr_bytes_read == curr_size || curr_bytes_read == 0)
            break;
    }

    // Replace any software breakpoint opcodes that fall into this range back
    // into "buf" before we return
    if (bytes_read > 0)
        RemoveBreakpointOpcodesFromBuffer (addr, bytes_read, (uint8_t *)buf);
    return bytes_read;
}

uint64_t
Process::ReadUnsignedInteger (lldb::addr_t vm_addr, size_t integer_byte_size, Error &error)
{
    if (integer_byte_size > sizeof(uint64_t))
    {
        error.SetErrorString ("unsupported integer size");
    }
    else
    {
        uint8_t tmp[sizeof(uint64_t)];
        DataExtractor data (tmp, 
                            integer_byte_size, 
                            m_target.GetArchitecture().GetByteOrder(), 
                            m_target.GetArchitecture().GetAddressByteSize());
        if (ReadMemory (vm_addr, tmp, integer_byte_size, error) == integer_byte_size)
        {
            uint32_t offset = 0;
            return data.GetMaxU64 (&offset, integer_byte_size);
        }
    }
    // Any plug-in that doesn't return success a memory read with the number
    // of bytes that were requested should be setting the error
    assert (error.Fail());
    return 0;
}

size_t
Process::WriteMemoryPrivate (addr_t addr, const void *buf, size_t size, Error &error)
{
    size_t bytes_written = 0;
    const uint8_t *bytes = (const uint8_t *)buf;
    
    while (bytes_written < size)
    {
        const size_t curr_size = size - bytes_written;
        const size_t curr_bytes_written = DoWriteMemory (addr + bytes_written, 
                                                         bytes + bytes_written, 
                                                         curr_size,
                                                         error);
        bytes_written += curr_bytes_written;
        if (curr_bytes_written == curr_size || curr_bytes_written == 0)
            break;
    }
    return bytes_written;
}

size_t
Process::WriteMemory (addr_t addr, const void *buf, size_t size, Error &error)
{
#if defined (ENABLE_MEMORY_CACHING)
    m_memory_cache.Flush (addr, size);
#endif

    if (buf == NULL || size == 0)
        return 0;

    // Need to bump the stop ID after writing so that ValueObjects will know to re-read themselves.
    // FUTURE: Doing this should be okay, but if anybody else gets upset about the stop_id changing when
    // the target hasn't run, then we will need to add a "memory generation" as well as a stop_id...
    m_stop_id++;

    // We need to write any data that would go where any current software traps
    // (enabled software breakpoints) any software traps (breakpoints) that we
    // may have placed in our tasks memory.

    BreakpointSiteList::collection::const_iterator iter = m_breakpoint_site_list.GetMap()->lower_bound (addr);
    BreakpointSiteList::collection::const_iterator end =  m_breakpoint_site_list.GetMap()->end();

    if (iter == end || iter->second->GetLoadAddress() > addr + size)
        return WriteMemoryPrivate (addr, buf, size, error);

    BreakpointSiteList::collection::const_iterator pos;
    size_t bytes_written = 0;
    addr_t intersect_addr = 0;
    size_t intersect_size = 0;
    size_t opcode_offset = 0;
    const uint8_t *ubuf = (const uint8_t *)buf;

    for (pos = iter; pos != end; ++pos)
    {
        BreakpointSiteSP bp;
        bp = pos->second;

        assert(bp->IntersectsRange(addr, size, &intersect_addr, &intersect_size, &opcode_offset));
        assert(addr <= intersect_addr && intersect_addr < addr + size);
        assert(addr < intersect_addr + intersect_size && intersect_addr + intersect_size <= addr + size);
        assert(opcode_offset + intersect_size <= bp->GetByteSize());

        // Check for bytes before this breakpoint
        const addr_t curr_addr = addr + bytes_written;
        if (intersect_addr > curr_addr)
        {
            // There are some bytes before this breakpoint that we need to
            // just write to memory
            size_t curr_size = intersect_addr - curr_addr;
            size_t curr_bytes_written = WriteMemoryPrivate (curr_addr, 
                                                            ubuf + bytes_written, 
                                                            curr_size, 
                                                            error);
            bytes_written += curr_bytes_written;
            if (curr_bytes_written != curr_size)
            {
                // We weren't able to write all of the requested bytes, we
                // are done looping and will return the number of bytes that
                // we have written so far.
                break;
            }
        }

        // Now write any bytes that would cover up any software breakpoints
        // directly into the breakpoint opcode buffer
        ::memcpy(bp->GetSavedOpcodeBytes() + opcode_offset, ubuf + bytes_written, intersect_size);
        bytes_written += intersect_size;
    }

    // Write any remaining bytes after the last breakpoint if we have any left
    if (bytes_written < size)
        bytes_written += WriteMemoryPrivate (addr + bytes_written, 
                                             ubuf + bytes_written, 
                                             size - bytes_written, 
                                             error);
                                             
    return bytes_written;
}
#define USE_ALLOCATE_MEMORY_CACHE 1
addr_t
Process::AllocateMemory(size_t size, uint32_t permissions, Error &error)
{
#if defined (USE_ALLOCATE_MEMORY_CACHE)
    return m_allocated_memory_cache.AllocateMemory(size, permissions, error);
#else
    addr_t allocated_addr = DoAllocateMemory (size, permissions, error);
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf("Process::AllocateMemory(size=%4zu, permissions=%s) => 0x%16.16llx (m_stop_id = %u)", 
                    size, 
                    GetPermissionsAsCString (permissions),
                    (uint64_t)allocated_addr,
                    m_stop_id);
    return allocated_addr;
#endif
}

Error
Process::DeallocateMemory (addr_t ptr)
{
    Error error;
#if defined (USE_ALLOCATE_MEMORY_CACHE)
    if (!m_allocated_memory_cache.DeallocateMemory(ptr))
    {
        error.SetErrorStringWithFormat ("deallocation of memory at 0x%llx failed.", (uint64_t)ptr);
    }
#else
    error = DoDeallocateMemory (ptr);
    
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf("Process::DeallocateMemory(addr=0x%16.16llx) => err = %s (m_stop_id = %u)", 
                    ptr, 
                    error.AsCString("SUCCESS"),
                    m_stop_id);
#endif
    return error;
}


Error
Process::EnableWatchpoint (WatchpointLocation *watchpoint)
{
    Error error;
    error.SetErrorString("watchpoints are not supported");
    return error;
}

Error
Process::DisableWatchpoint (WatchpointLocation *watchpoint)
{
    Error error;
    error.SetErrorString("watchpoints are not supported");
    return error;
}

StateType
Process::WaitForProcessStopPrivate (const TimeValue *timeout, EventSP &event_sp)
{
    StateType state;
    // Now wait for the process to launch and return control to us, and then
    // call DidLaunch:
    while (1)
    {
        event_sp.reset();
        state = WaitForStateChangedEventsPrivate (timeout, event_sp);

        if (StateIsStoppedState(state))
            break;

        // If state is invalid, then we timed out
        if (state == eStateInvalid)
            break;

        if (event_sp)
            HandlePrivateEvent (event_sp);
    }
    return state;
}

Error
Process::Launch
(
    char const *argv[],
    char const *envp[],
    uint32_t launch_flags,
    const char *stdin_path,
    const char *stdout_path,
    const char *stderr_path,
    const char *working_directory
)
{
    Error error;
    m_abi_sp.reset();
    m_dyld_ap.reset();
    m_process_input_reader.reset();

    Module *exe_module = m_target.GetExecutableModule().get();
    if (exe_module)
    {
        char local_exec_file_path[PATH_MAX];
        char platform_exec_file_path[PATH_MAX];
        exe_module->GetFileSpec().GetPath(local_exec_file_path, sizeof(local_exec_file_path));
        exe_module->GetPlatformFileSpec().GetPath(platform_exec_file_path, sizeof(platform_exec_file_path));
        if (exe_module->GetFileSpec().Exists())
        {
            if (PrivateStateThreadIsValid ())
                PausePrivateStateThread ();
    
            error = WillLaunch (exe_module);
            if (error.Success())
            {
                SetPublicState (eStateLaunching);
                // The args coming in should not contain the application name, the
                // lldb_private::Process class will add this in case the executable
                // gets resolved to a different file than was given on the command
                // line (like when an applicaiton bundle is specified and will
                // resolve to the contained exectuable file, or the file given was
                // a symlink or other file system link that resolves to a different
                // file).

                // Get the resolved exectuable path

                // Make a new argument vector
                std::vector<const char *> exec_path_plus_argv;
                // Append the resolved executable path
                exec_path_plus_argv.push_back (platform_exec_file_path);

                // Push all args if there are any
                if (argv)
                {
                    for (int i = 0; argv[i]; ++i)
                        exec_path_plus_argv.push_back(argv[i]);
                }

                // Push a NULL to terminate the args.
                exec_path_plus_argv.push_back(NULL);

                // Now launch using these arguments.
                error = DoLaunch (exe_module, 
                                  exec_path_plus_argv.empty() ? NULL : &exec_path_plus_argv.front(), 
                                  envp, 
                                  launch_flags,
                                  stdin_path, 
                                  stdout_path, 
                                  stderr_path,
                                  working_directory);

                if (error.Fail())
                {
                    if (GetID() != LLDB_INVALID_PROCESS_ID)
                    {
                        SetID (LLDB_INVALID_PROCESS_ID);
                        const char *error_string = error.AsCString();
                        if (error_string == NULL)
                            error_string = "launch failed";
                        SetExitStatus (-1, error_string);
                    }
                }
                else
                {
                    EventSP event_sp;
                    StateType state = WaitForProcessStopPrivate(NULL, event_sp);

                    if (state == eStateStopped || state == eStateCrashed)
                    {

                        DidLaunch ();

                        m_dyld_ap.reset (DynamicLoader::FindPlugin(this, NULL));
                        if (m_dyld_ap.get())
                            m_dyld_ap->DidLaunch();

                        // This delays passing the stopped event to listeners till DidLaunch gets
                        // a chance to complete...
                        HandlePrivateEvent (event_sp);

                        if (PrivateStateThreadIsValid ())
                            ResumePrivateStateThread ();
                        else
                            StartPrivateStateThread ();
                    }
                    else if (state == eStateExited)
                    {
                        // We exited while trying to launch somehow.  Don't call DidLaunch as that's
                        // not likely to work, and return an invalid pid.
                        HandlePrivateEvent (event_sp);
                    }
                }
            }
        }
        else
        {
            error.SetErrorStringWithFormat("File doesn't exist: '%s'.\n", local_exec_file_path);
        }
    }
    return error;
}

Process::NextEventAction::EventActionResult
Process::AttachCompletionHandler::PerformAction (lldb::EventSP &event_sp)
{
    StateType state = ProcessEventData::GetStateFromEvent (event_sp.get());
    switch (state) 
    {
        case eStateRunning:
        case eStateConnected:
            return eEventActionRetry;
        
        case eStateStopped:
        case eStateCrashed:
        {
            // During attach, prior to sending the eStateStopped event, 
            // lldb_private::Process subclasses must set the process must set
            // the new process ID.
            assert (m_process->GetID() != LLDB_INVALID_PROCESS_ID);
            m_process->CompleteAttach ();
            return eEventActionSuccess;
        }
            
            
            break;
        default:
        case eStateExited:   
        case eStateInvalid:
            m_exit_string.assign ("No valid Process");
            return eEventActionExit;
            break;
    }
}

Process::NextEventAction::EventActionResult
Process::AttachCompletionHandler::HandleBeingInterrupted()
{
    return eEventActionSuccess;
}

const char *
Process::AttachCompletionHandler::GetExitString ()
{
    return m_exit_string.c_str();
}

Error
Process::Attach (lldb::pid_t attach_pid)
{

    m_abi_sp.reset();
    m_process_input_reader.reset();

    // Find the process and its architecture.  Make sure it matches the architecture
    // of the current Target, and if not adjust it.
    
    ProcessInstanceInfo process_info;
    PlatformSP platform_sp (m_target.GetDebugger().GetPlatformList().GetSelectedPlatform ());
    if (platform_sp)
    {
        if (platform_sp->GetProcessInfo (attach_pid, process_info))
        {
            const ArchSpec &process_arch = process_info.GetArchitecture();
            if (process_arch.IsValid())
                GetTarget().SetArchitecture(process_arch);
        }
    }

    m_dyld_ap.reset();

    Error error (WillAttachToProcessWithID(attach_pid));
    if (error.Success())
    {
        SetPublicState (eStateAttaching);

        error = DoAttachToProcessWithID (attach_pid);
        if (error.Success())
        {
            SetNextEventAction(new Process::AttachCompletionHandler(this));
            StartPrivateStateThread();
        }
        else
        {
            if (GetID() != LLDB_INVALID_PROCESS_ID)
            {
                SetID (LLDB_INVALID_PROCESS_ID);
                const char *error_string = error.AsCString();
                if (error_string == NULL)
                    error_string = "attach failed";

                SetExitStatus(-1, error_string);
            }
        }
    }
    return error;
}

Error
Process::Attach (const char *process_name, bool wait_for_launch)
{
    m_abi_sp.reset();
    m_process_input_reader.reset();
    
    // Find the process and its architecture.  Make sure it matches the architecture
    // of the current Target, and if not adjust it.
    Error error;
    
    if (!wait_for_launch)
    {
        ProcessInstanceInfoList process_infos;
        PlatformSP platform_sp (m_target.GetDebugger().GetPlatformList().GetSelectedPlatform ());
        if (platform_sp)
        {
            ProcessInstanceInfoMatch match_info;
            match_info.GetProcessInfo().SetName(process_name);
            match_info.SetNameMatchType (eNameMatchEquals);
            platform_sp->FindProcesses (match_info, process_infos);
            if (process_infos.GetSize() > 1)
            {
                error.SetErrorStringWithFormat ("More than one process named %s\n", process_name);
            }
            else if (process_infos.GetSize() == 0)
            {
                error.SetErrorStringWithFormat ("Could not find a process named %s\n", process_name);
            }
            else 
            {
                ProcessInstanceInfo process_info;
                if (process_infos.GetInfoAtIndex (0, process_info))
                {
                    const ArchSpec &process_arch = process_info.GetArchitecture();
                    if (process_arch.IsValid() && process_arch != GetTarget().GetArchitecture())
                    {
                        // Set the architecture on the target.
                        GetTarget().SetArchitecture (process_arch);
                    }
                }
            }
        }
        else
        {        
            error.SetErrorString ("Invalid platform");
        }
    }

    if (error.Success())
    {
        m_dyld_ap.reset();
        
        error = WillAttachToProcessWithName(process_name, wait_for_launch);
        if (error.Success())
        {
            SetPublicState (eStateAttaching);
            error = DoAttachToProcessWithName (process_name, wait_for_launch);
            if (error.Fail())
            {
                if (GetID() != LLDB_INVALID_PROCESS_ID)
                {
                    SetID (LLDB_INVALID_PROCESS_ID);
                    const char *error_string = error.AsCString();
                    if (error_string == NULL)
                        error_string = "attach failed";

                    SetExitStatus(-1, error_string);
                }
            }
            else
            {
                SetNextEventAction(new Process::AttachCompletionHandler(this));
                StartPrivateStateThread();
            }
        }
    }
    return error;
}

void
Process::CompleteAttach ()
{
    // Let the process subclass figure out at much as it can about the process
    // before we go looking for a dynamic loader plug-in.
    DidAttach();

    // We have complete the attach, now it is time to find the dynamic loader
    // plug-in
    m_dyld_ap.reset (DynamicLoader::FindPlugin(this, NULL));
    if (m_dyld_ap.get())
        m_dyld_ap->DidAttach();

    // Figure out which one is the executable, and set that in our target:
    ModuleList &modules = m_target.GetImages();
    
    size_t num_modules = modules.GetSize();
    for (int i = 0; i < num_modules; i++)
    {
        ModuleSP module_sp (modules.GetModuleAtIndex(i));
        if (module_sp && module_sp->IsExecutable())
        {
            ModuleSP target_exe_module_sp (m_target.GetExecutableModule());
            if (target_exe_module_sp != module_sp)
                m_target.SetExecutableModule (module_sp, false);
            break;
        }
    }
}

Error
Process::ConnectRemote (const char *remote_url)
{
    m_abi_sp.reset();
    m_process_input_reader.reset();
    
    // Find the process and its architecture.  Make sure it matches the architecture
    // of the current Target, and if not adjust it.
    
    Error error (DoConnectRemote (remote_url));
    if (error.Success())
    {
        if (GetID() != LLDB_INVALID_PROCESS_ID)
        {
            EventSP event_sp;
            StateType state = WaitForProcessStopPrivate(NULL, event_sp);
        
            if (state == eStateStopped || state == eStateCrashed)
            {
                // If we attached and actually have a process on the other end, then 
                // this ended up being the equivalent of an attach.
                CompleteAttach ();
                
                // This delays passing the stopped event to listeners till 
                // CompleteAttach gets a chance to complete...
                HandlePrivateEvent (event_sp);
                
            }
        }

        if (PrivateStateThreadIsValid ())
            ResumePrivateStateThread ();
        else
            StartPrivateStateThread ();
    }
    return error;
}


Error
Process::Resume ()
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf("Process::Resume() m_stop_id = %u, public state: %s private state: %s", 
                    m_stop_id,
                    StateAsCString(m_public_state.GetValue()),
                    StateAsCString(m_private_state.GetValue()));

    Error error (WillResume());
    // Tell the process it is about to resume before the thread list
    if (error.Success())
    {
        // Now let the thread list know we are about to resume so it
        // can let all of our threads know that they are about to be
        // resumed. Threads will each be called with
        // Thread::WillResume(StateType) where StateType contains the state
        // that they are supposed to have when the process is resumed
        // (suspended/running/stepping). Threads should also check
        // their resume signal in lldb::Thread::GetResumeSignal()
        // to see if they are suppoed to start back up with a signal.
        if (m_thread_list.WillResume())
        {
            error = DoResume();
            if (error.Success())
            {
                DidResume();
                m_thread_list.DidResume();
                if (log)
                    log->Printf ("Process thinks the process has resumed.");
            }
        }
        else
        {
            error.SetErrorStringWithFormat("Process::WillResume() thread list returned false after WillResume");
        }
    }
    else if (log)
        log->Printf ("Process::WillResume() got an error \"%s\".", error.AsCString("<unknown error>"));
    return error;
}

Error
Process::Halt ()
{
    // Pause our private state thread so we can ensure no one else eats
    // the stop event out from under us.
    Listener halt_listener ("lldb.process.halt_listener");
    HijackPrivateProcessEvents(&halt_listener);

    EventSP event_sp;
    Error error (WillHalt());
    
    if (error.Success())
    {
        
        bool caused_stop = false;
        
        // Ask the process subclass to actually halt our process
        error = DoHalt(caused_stop);
        if (error.Success())
        {
            if (m_public_state.GetValue() == eStateAttaching)
            {
                SetExitStatus(SIGKILL, "Cancelled async attach.");
                Destroy ();
            }
            else
            {
                // If "caused_stop" is true, then DoHalt stopped the process. If
                // "caused_stop" is false, the process was already stopped.
                // If the DoHalt caused the process to stop, then we want to catch
                // this event and set the interrupted bool to true before we pass
                // this along so clients know that the process was interrupted by
                // a halt command.
                if (caused_stop)
                {
                    // Wait for 1 second for the process to stop.
                    TimeValue timeout_time;
                    timeout_time = TimeValue::Now();
                    timeout_time.OffsetWithSeconds(1);
                    bool got_event = halt_listener.WaitForEvent (&timeout_time, event_sp);
                    StateType state = ProcessEventData::GetStateFromEvent(event_sp.get());
                    
                    if (!got_event || state == eStateInvalid)
                    {
                        // We timeout out and didn't get a stop event...
                        error.SetErrorStringWithFormat ("Halt timed out. State = %s", StateAsCString(GetState()));
                    }
                    else
                    {
                        if (StateIsStoppedState (state))
                        {
                            // We caused the process to interrupt itself, so mark this
                            // as such in the stop event so clients can tell an interrupted
                            // process from a natural stop
                            ProcessEventData::SetInterruptedInEvent (event_sp.get(), true);
                        }
                        else
                        {
                            LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
                            if (log)
                                log->Printf("Process::Halt() failed to stop, state is: %s", StateAsCString(state));
                            error.SetErrorString ("Did not get stopped event after halt.");
                        }
                    }
                }
                DidHalt();
            }
        }
    }
    // Resume our private state thread before we post the event (if any)
    RestorePrivateProcessEvents();

    // Post any event we might have consumed. If all goes well, we will have
    // stopped the process, intercepted the event and set the interrupted
    // bool in the event.  Post it to the private event queue and that will end up
    // correctly setting the state.
    if (event_sp)
        m_private_state_broadcaster.BroadcastEvent(event_sp);

    return error;
}

Error
Process::Detach ()
{
    Error error (WillDetach());

    if (error.Success())
    {
        DisableAllBreakpointSites();
        error = DoDetach(); 
        if (error.Success())
        {
            DidDetach();
            StopPrivateStateThread();
        }
    }
    return error;
}

Error
Process::Destroy ()
{
    Error error (WillDestroy());
    if (error.Success())
    {
        DisableAllBreakpointSites();
        error = DoDestroy();
        if (error.Success())
        {
            DidDestroy();
            StopPrivateStateThread();
        }
        m_stdio_communication.StopReadThread();
        m_stdio_communication.Disconnect();
        if (m_process_input_reader && m_process_input_reader->IsActive())
            m_target.GetDebugger().PopInputReader (m_process_input_reader);
        if (m_process_input_reader)
            m_process_input_reader.reset();
    }
    return error;
}

Error
Process::Signal (int signal)
{
    Error error (WillSignal());
    if (error.Success())
    {
        error = DoSignal(signal);
        if (error.Success())
            DidSignal();
    }
    return error;
}

lldb::ByteOrder
Process::GetByteOrder () const
{
    return m_target.GetArchitecture().GetByteOrder();
}

uint32_t
Process::GetAddressByteSize () const
{
    return m_target.GetArchitecture().GetAddressByteSize();
}


bool
Process::ShouldBroadcastEvent (Event *event_ptr)
{
    const StateType state = Process::ProcessEventData::GetStateFromEvent (event_ptr);
    bool return_value = true;
    LogSP log(lldb_private::GetLogIfAllCategoriesSet(LIBLLDB_LOG_EVENTS));

    switch (state)
    {
        case eStateConnected:
        case eStateAttaching:
        case eStateLaunching:
        case eStateDetached:
        case eStateExited:
        case eStateUnloaded:
            // These events indicate changes in the state of the debugging session, always report them.
            return_value = true;
            break;
        case eStateInvalid:
            // We stopped for no apparent reason, don't report it.
            return_value = false;
            break;
        case eStateRunning:
        case eStateStepping:
            // If we've started the target running, we handle the cases where we
            // are already running and where there is a transition from stopped to
            // running differently.
            // running -> running: Automatically suppress extra running events
            // stopped -> running: Report except when there is one or more no votes
            //     and no yes votes.
            SynchronouslyNotifyStateChanged (state);
            switch (m_public_state.GetValue())
            {
                case eStateRunning:
                case eStateStepping:
                    // We always suppress multiple runnings with no PUBLIC stop in between.
                    return_value = false;
                    break;
                default:
                    // TODO: make this work correctly. For now always report
                    // run if we aren't running so we don't miss any runnning
                    // events. If I run the lldb/test/thread/a.out file and
                    // break at main.cpp:58, run and hit the breakpoints on
                    // multiple threads, then somehow during the stepping over
                    // of all breakpoints no run gets reported.
                    return_value = true;

                    // This is a transition from stop to run.
                    switch (m_thread_list.ShouldReportRun (event_ptr))
                    {
                        case eVoteYes:
                        case eVoteNoOpinion:
                            return_value = true;
                            break;
                        case eVoteNo:
                            return_value = false;
                            break;
                    }
                    break;
            }
            break;
        case eStateStopped:
        case eStateCrashed:
        case eStateSuspended:
        {
            // We've stopped.  First see if we're going to restart the target.
            // If we are going to stop, then we always broadcast the event.
            // If we aren't going to stop, let the thread plans decide if we're going to report this event.
            // If no thread has an opinion, we don't report it.
            if (ProcessEventData::GetInterruptedFromEvent (event_ptr))
            {
                if (log)
                    log->Printf ("Process::ShouldBroadcastEvent (%p) stopped due to an interrupt, state: %s", event_ptr, StateAsCString(state));
                return true;
            }
            else
            {
                RefreshStateAfterStop ();

                if (m_thread_list.ShouldStop (event_ptr) == false)
                {
                    switch (m_thread_list.ShouldReportStop (event_ptr))
                    {
                        case eVoteYes:
                            Process::ProcessEventData::SetRestartedInEvent (event_ptr, true);
                            // Intentional fall-through here.
                        case eVoteNoOpinion:
                        case eVoteNo:
                            return_value = false;
                            break;
                    }

                    if (log)
                        log->Printf ("Process::ShouldBroadcastEvent (%p) Restarting process from state: %s", event_ptr, StateAsCString(state));
                    Resume ();
                }
                else
                {
                    return_value = true;
                    SynchronouslyNotifyStateChanged (state);
                }
            }
        }
    }

    if (log)
        log->Printf ("Process::ShouldBroadcastEvent (%p) => %s", event_ptr, StateAsCString(state), return_value ? "YES" : "NO");
    return return_value;
}


bool
Process::StartPrivateStateThread ()
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet(LIBLLDB_LOG_EVENTS));

    bool already_running = PrivateStateThreadIsValid ();
    if (log)
        log->Printf ("Process::%s()%s ", __FUNCTION__, already_running ? " already running" : " starting private state thread");

    if (already_running)
        return true;

    // Create a thread that watches our internal state and controls which
    // events make it to clients (into the DCProcess event queue).
    char thread_name[1024];
    snprintf(thread_name, sizeof(thread_name), "<lldb.process.internal-state(pid=%i)>", GetID());
    m_private_state_thread = Host::ThreadCreate (thread_name, Process::PrivateStateThread, this, NULL);
    return IS_VALID_LLDB_HOST_THREAD(m_private_state_thread);
}

void
Process::PausePrivateStateThread ()
{
    ControlPrivateStateThread (eBroadcastInternalStateControlPause);
}

void
Process::ResumePrivateStateThread ()
{
    ControlPrivateStateThread (eBroadcastInternalStateControlResume);
}

void
Process::StopPrivateStateThread ()
{
    if (PrivateStateThreadIsValid ())
        ControlPrivateStateThread (eBroadcastInternalStateControlStop);
}

void
Process::ControlPrivateStateThread (uint32_t signal)
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet(LIBLLDB_LOG_EVENTS));

    assert (signal == eBroadcastInternalStateControlStop ||
            signal == eBroadcastInternalStateControlPause ||
            signal == eBroadcastInternalStateControlResume);

    if (log)
        log->Printf ("Process::%s (signal = %d)", __FUNCTION__, signal);

    // Signal the private state thread. First we should copy this is case the
    // thread starts exiting since the private state thread will NULL this out
    // when it exits
    const lldb::thread_t private_state_thread = m_private_state_thread;
    if (IS_VALID_LLDB_HOST_THREAD(private_state_thread))
    {
        TimeValue timeout_time;
        bool timed_out;

        m_private_state_control_broadcaster.BroadcastEvent (signal, NULL);

        timeout_time = TimeValue::Now();
        timeout_time.OffsetWithSeconds(2);
        m_private_state_control_wait.WaitForValueEqualTo (true, &timeout_time, &timed_out);
        m_private_state_control_wait.SetValue (false, eBroadcastNever);

        if (signal == eBroadcastInternalStateControlStop)
        {
            if (timed_out)
                Host::ThreadCancel (private_state_thread, NULL);

            thread_result_t result = NULL;
            Host::ThreadJoin (private_state_thread, &result, NULL);
            m_private_state_thread = LLDB_INVALID_HOST_THREAD;
        }
    }
}

void
Process::HandlePrivateEvent (EventSP &event_sp)
{
    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
    
    const StateType new_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());
    
    // First check to see if anybody wants a shot at this event:
    if (m_next_event_action_ap.get() != NULL)
    {
        NextEventAction::EventActionResult action_result = m_next_event_action_ap->PerformAction(event_sp);
        switch (action_result)
        {
            case NextEventAction::eEventActionSuccess:
                SetNextEventAction(NULL);
                break;
            case NextEventAction::eEventActionRetry:
                break;
            case NextEventAction::eEventActionExit:
                // Handle Exiting Here.  If we already got an exited event,
                // we should just propagate it.  Otherwise, swallow this event,
                // and set our state to exit so the next event will kill us.
                if (new_state != eStateExited)
                {
                    // FIXME: should cons up an exited event, and discard this one.
                    SetExitStatus(0, m_next_event_action_ap->GetExitString());
                    SetNextEventAction(NULL);
                    return;
                }
                SetNextEventAction(NULL);
                break;
        }
    }
    
    // See if we should broadcast this state to external clients?
    const bool should_broadcast = ShouldBroadcastEvent (event_sp.get());

    if (should_broadcast)
    {
        if (log)
        {
            log->Printf ("Process::%s (pid = %i) broadcasting new state %s (old state %s) to %s", 
                         __FUNCTION__, 
                         GetID(), 
                         StateAsCString(new_state), 
                         StateAsCString (GetState ()),
                         IsHijackedForEvent(eBroadcastBitStateChanged) ? "hijacked" : "public");
        }
        Process::ProcessEventData::SetUpdateStateOnRemoval(event_sp.get());
        if (StateIsRunningState (new_state))
            PushProcessInputReader ();
        else 
            PopProcessInputReader ();

        BroadcastEvent (event_sp);
    }
    else
    {
        if (log)
        {
            log->Printf ("Process::%s (pid = %i) suppressing state %s (old state %s): should_broadcast == false", 
                         __FUNCTION__, 
                         GetID(), 
                         StateAsCString(new_state), 
                         StateAsCString (GetState ()),
                         IsHijackedForEvent(eBroadcastBitStateChanged) ? "hijacked" : "public");
        }
    }
}

void *
Process::PrivateStateThread (void *arg)
{
    Process *proc = static_cast<Process*> (arg);
    void *result = proc->RunPrivateStateThread ();
    return result;
}

void *
Process::RunPrivateStateThread ()
{
    bool control_only = false;
    m_private_state_control_wait.SetValue (false, eBroadcastNever);

    LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));
    if (log)
        log->Printf ("Process::%s (arg = %p, pid = %i) thread starting...", __FUNCTION__, this, GetID());

    bool exit_now = false;
    while (!exit_now)
    {
        EventSP event_sp;
        WaitForEventsPrivate (NULL, event_sp, control_only);
        if (event_sp->BroadcasterIs(&m_private_state_control_broadcaster))
        {
            switch (event_sp->GetType())
            {
            case eBroadcastInternalStateControlStop:
                exit_now = true;
                continue;   // Go to next loop iteration so we exit without
                break;      // doing any internal state managment below

            case eBroadcastInternalStateControlPause:
                control_only = true;
                break;

            case eBroadcastInternalStateControlResume:
                control_only = false;
                break;
            }
            
            if (log)
                log->Printf ("Process::%s (arg = %p, pid = %i) got a control event: %d", __FUNCTION__, this, GetID(), event_sp->GetType());

            m_private_state_control_wait.SetValue (true, eBroadcastAlways);
            continue;
        }


        const StateType internal_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());

        if (internal_state != eStateInvalid)
        {
            HandlePrivateEvent (event_sp);
        }

        if (internal_state == eStateInvalid || 
            internal_state == eStateExited  ||
            internal_state == eStateDetached )
        {
            if (log)
                log->Printf ("Process::%s (arg = %p, pid = %i) about to exit with internal state %s...", __FUNCTION__, this, GetID(), StateAsCString(internal_state));

            break;
        }
    }

    // Verify log is still enabled before attempting to write to it...
    if (log)
        log->Printf ("Process::%s (arg = %p, pid = %i) thread exiting...", __FUNCTION__, this, GetID());

    m_private_state_control_wait.SetValue (true, eBroadcastAlways);
    m_private_state_thread = LLDB_INVALID_HOST_THREAD;
    return NULL;
}

//------------------------------------------------------------------
// Process Event Data
//------------------------------------------------------------------

Process::ProcessEventData::ProcessEventData () :
    EventData (),
    m_process_sp (),
    m_state (eStateInvalid),
    m_restarted (false),
    m_update_state (0),
    m_interrupted (false)
{
}

Process::ProcessEventData::ProcessEventData (const ProcessSP &process_sp, StateType state) :
    EventData (),
    m_process_sp (process_sp),
    m_state (state),
    m_restarted (false),
    m_update_state (0),
    m_interrupted (false)
{
}

Process::ProcessEventData::~ProcessEventData()
{
}

const ConstString &
Process::ProcessEventData::GetFlavorString ()
{
    static ConstString g_flavor ("Process::ProcessEventData");
    return g_flavor;
}

const ConstString &
Process::ProcessEventData::GetFlavor () const
{
    return ProcessEventData::GetFlavorString ();
}

void
Process::ProcessEventData::DoOnRemoval (Event *event_ptr)
{
    // This function gets called twice for each event, once when the event gets pulled 
    // off of the private process event queue, and then any number of times, first when it gets pulled off of
    // the public event queue, then other times when we're pretending that this is where we stopped at the
    // end of expression evaluation.  m_update_state is used to distinguish these
    // three cases; it is 0 when we're just pulling it off for private handling, 
    // and > 1 for expression evaluation, and we don't want to do the breakpoint command handling then.
    
    if (m_update_state != 1)
        return;
        
    m_process_sp->SetPublicState (m_state);
        
    // If we're stopped and haven't restarted, then do the breakpoint commands here:
    if (m_state == eStateStopped && ! m_restarted)
    {
        int num_threads = m_process_sp->GetThreadList().GetSize();
        int idx;

        for (idx = 0; idx < num_threads; ++idx)
        {
            lldb::ThreadSP thread_sp = m_process_sp->GetThreadList().GetThreadAtIndex(idx);

            StopInfoSP stop_info_sp = thread_sp->GetStopInfo ();
            if (stop_info_sp)
            {
                stop_info_sp->PerformAction(event_ptr);
            }
        }
        
        // The stop action might restart the target.  If it does, then we want to mark that in the
        // event so that whoever is receiving it will know to wait for the running event and reflect
        // that state appropriately.

        if (m_process_sp->GetPrivateState() == eStateRunning)
            SetRestarted(true);
        else
        {
            // Finally, if we didn't restart, run the Stop Hooks here:
            // They might also restart the target, so watch for that.
            m_process_sp->GetTarget().RunStopHooks();
            if (m_process_sp->GetPrivateState() == eStateRunning)
                SetRestarted(true);
        }
        
    }
}

void
Process::ProcessEventData::Dump (Stream *s) const
{
    if (m_process_sp)
        s->Printf(" process = %p (pid = %u), ", m_process_sp.get(), m_process_sp->GetID());

    s->Printf("state = %s", StateAsCString(GetState()));
}

const Process::ProcessEventData *
Process::ProcessEventData::GetEventDataFromEvent (const Event *event_ptr)
{
    if (event_ptr)
    {
        const EventData *event_data = event_ptr->GetData();
        if (event_data && event_data->GetFlavor() == ProcessEventData::GetFlavorString())
            return static_cast <const ProcessEventData *> (event_ptr->GetData());
    }
    return NULL;
}

ProcessSP
Process::ProcessEventData::GetProcessFromEvent (const Event *event_ptr)
{
    ProcessSP process_sp;
    const ProcessEventData *data = GetEventDataFromEvent (event_ptr);
    if (data)
        process_sp = data->GetProcessSP();
    return process_sp;
}

StateType
Process::ProcessEventData::GetStateFromEvent (const Event *event_ptr)
{
    const ProcessEventData *data = GetEventDataFromEvent (event_ptr);
    if (data == NULL)
        return eStateInvalid;
    else
        return data->GetState();
}

bool
Process::ProcessEventData::GetRestartedFromEvent (const Event *event_ptr)
{
    const ProcessEventData *data = GetEventDataFromEvent (event_ptr);
    if (data == NULL)
        return false;
    else
        return data->GetRestarted();
}

void
Process::ProcessEventData::SetRestartedInEvent (Event *event_ptr, bool new_value)
{
    ProcessEventData *data = const_cast<ProcessEventData *>(GetEventDataFromEvent (event_ptr));
    if (data != NULL)
        data->SetRestarted(new_value);
}

bool
Process::ProcessEventData::GetInterruptedFromEvent (const Event *event_ptr)
{
    const ProcessEventData *data = GetEventDataFromEvent (event_ptr);
    if (data == NULL)
        return false;
    else
        return data->GetInterrupted ();
}

void
Process::ProcessEventData::SetInterruptedInEvent (Event *event_ptr, bool new_value)
{
    ProcessEventData *data = const_cast<ProcessEventData *>(GetEventDataFromEvent (event_ptr));
    if (data != NULL)
        data->SetInterrupted(new_value);
}

bool
Process::ProcessEventData::SetUpdateStateOnRemoval (Event *event_ptr)
{
    ProcessEventData *data = const_cast<ProcessEventData *>(GetEventDataFromEvent (event_ptr));
    if (data)
    {
        data->SetUpdateStateOnRemoval();
        return true;
    }
    return false;
}

void
Process::CalculateExecutionContext (ExecutionContext &exe_ctx)
{
    exe_ctx.target = &m_target;
    exe_ctx.process = this;
    exe_ctx.thread = NULL;
    exe_ctx.frame = NULL;
}

lldb::ProcessSP
Process::GetSP ()
{
    return GetTarget().GetProcessSP();
}

//uint32_t
//Process::ListProcessesMatchingName (const char *name, StringList &matches, std::vector<lldb::pid_t> &pids)
//{
//    return 0;
//}
//    
//ArchSpec
//Process::GetArchSpecForExistingProcess (lldb::pid_t pid)
//{
//    return Host::GetArchSpecForExistingProcess (pid);
//}
//
//ArchSpec
//Process::GetArchSpecForExistingProcess (const char *process_name)
//{
//    return Host::GetArchSpecForExistingProcess (process_name);
//}
//
void
Process::AppendSTDOUT (const char * s, size_t len)
{
    Mutex::Locker locker (m_stdio_communication_mutex);
    m_stdout_data.append (s, len);
    
    BroadcastEventIfUnique (eBroadcastBitSTDOUT, new ProcessEventData (GetTarget().GetProcessSP(), GetState()));
}

void
Process::STDIOReadThreadBytesReceived (void *baton, const void *src, size_t src_len)
{
    Process *process = (Process *) baton;
    process->AppendSTDOUT (static_cast<const char *>(src), src_len);
}

size_t
Process::ProcessInputReaderCallback (void *baton,
                                     InputReader &reader,
                                     lldb::InputReaderAction notification,
                                     const char *bytes,
                                     size_t bytes_len)
{
    Process *process = (Process *) baton;
    
    switch (notification)
    {
    case eInputReaderActivate:
        break;
        
    case eInputReaderDeactivate:
        break;
        
    case eInputReaderReactivate:
        break;
        
    case eInputReaderAsynchronousOutputWritten:
        break;
        
    case eInputReaderGotToken:
        {
            Error error;
            process->PutSTDIN (bytes, bytes_len, error);
        }
        break;
        
    case eInputReaderInterrupt:
        process->Halt ();
        break;
            
    case eInputReaderEndOfFile:
        process->AppendSTDOUT ("^D", 2);
        break;
        
    case eInputReaderDone:
        break;
        
    }
    
    return bytes_len;
}

void
Process::ResetProcessInputReader ()
{   
    m_process_input_reader.reset();
}

void
Process::SetUpProcessInputReader (int file_descriptor)
{
    // First set up the Read Thread for reading/handling process I/O
    
    std::auto_ptr<ConnectionFileDescriptor> conn_ap (new ConnectionFileDescriptor (file_descriptor, true));
    
    if (conn_ap.get())
    {
        m_stdio_communication.SetConnection (conn_ap.release());
        if (m_stdio_communication.IsConnected())
        {
            m_stdio_communication.SetReadThreadBytesReceivedCallback (STDIOReadThreadBytesReceived, this);
            m_stdio_communication.StartReadThread();
            
            // Now read thread is set up, set up input reader.
            
            if (!m_process_input_reader.get())
            {
                m_process_input_reader.reset (new InputReader(m_target.GetDebugger()));
                Error err (m_process_input_reader->Initialize (Process::ProcessInputReaderCallback,
                                                               this,
                                                               eInputReaderGranularityByte,
                                                               NULL,
                                                               NULL,
                                                               false));
                
                if  (err.Fail())
                    m_process_input_reader.reset();
            }
        }
    }
}

void
Process::PushProcessInputReader ()
{
    if (m_process_input_reader && !m_process_input_reader->IsActive())
        m_target.GetDebugger().PushInputReader (m_process_input_reader);
}

void
Process::PopProcessInputReader ()
{
    if (m_process_input_reader && m_process_input_reader->IsActive())
        m_target.GetDebugger().PopInputReader (m_process_input_reader);
}

// The process needs to know about installed plug-ins
void
Process::SettingsInitialize ()
{
    static std::vector<OptionEnumValueElement> g_plugins;
    
    int i=0; 
    const char *name;
    OptionEnumValueElement option_enum;
    while ((name = PluginManager::GetProcessPluginNameAtIndex (i)) != NULL)
    {
        if (name)
        {
            option_enum.value = i;
            option_enum.string_value = name;
            option_enum.usage = PluginManager::GetProcessPluginDescriptionAtIndex (i);
            g_plugins.push_back (option_enum);
        }
        ++i;
    }
    option_enum.value = 0;
    option_enum.string_value = NULL;
    option_enum.usage = NULL;
    g_plugins.push_back (option_enum);
    
    for (i=0; (name = SettingsController::instance_settings_table[i].var_name); ++i)
    {
        if (::strcmp (name, "plugin") == 0)
        {
            SettingsController::instance_settings_table[i].enum_values = &g_plugins[0];
            break;
        }
    }
    UserSettingsControllerSP &usc = GetSettingsController();
    usc.reset (new SettingsController);
    UserSettingsController::InitializeSettingsController (usc,
                                                          SettingsController::global_settings_table,
                                                          SettingsController::instance_settings_table);
                                                          
    // Now call SettingsInitialize() for each 'child' of Process settings
    Thread::SettingsInitialize ();
}

void
Process::SettingsTerminate ()
{
    // Must call SettingsTerminate() on each 'child' of Process settings before terminating Process settings.
    
    Thread::SettingsTerminate ();
    
    // Now terminate Process Settings.
    
    UserSettingsControllerSP &usc = GetSettingsController();
    UserSettingsController::FinalizeSettingsController (usc);
    usc.reset();
}

UserSettingsControllerSP &
Process::GetSettingsController ()
{
    static UserSettingsControllerSP g_settings_controller;
    return g_settings_controller;
}

void
Process::UpdateInstanceName ()
{
    ModuleSP module_sp = GetTarget().GetExecutableModule();
    if (module_sp)
    {
        StreamString sstr;
        sstr.Printf ("%s", module_sp->GetFileSpec().GetFilename().AsCString());
                    
        GetSettingsController()->RenameInstanceSettings (GetInstanceName().AsCString(),
                                                         sstr.GetData());
    }
}

ExecutionResults
Process::RunThreadPlan (ExecutionContext &exe_ctx,
                        lldb::ThreadPlanSP &thread_plan_sp,        
                        bool stop_others,
                        bool try_all_threads,
                        bool discard_on_error,
                        uint32_t single_thread_timeout_usec,
                        Stream &errors)
{
    ExecutionResults return_value = eExecutionSetupError;
    
    if (thread_plan_sp.get() == NULL)
    {
        errors.Printf("RunThreadPlan called with empty thread plan.");
        return eExecutionSetupError;
    }
    
    // We rely on the thread plan we are running returning "PlanCompleted" if when it successfully completes.
    // For that to be true the plan can't be private - since private plans suppress themselves in the
    // GetCompletedPlan call. 
    
    bool orig_plan_private = thread_plan_sp->GetPrivate();
    thread_plan_sp->SetPrivate(false);
    
    if (m_private_state.GetValue() != eStateStopped)
    {
        errors.Printf ("RunThreadPlan called while the private state was not stopped.");
        return eExecutionSetupError;
    }
    
    // Save this value for restoration of the execution context after we run
    const uint32_t thread_idx_id = exe_ctx.thread->GetIndexID();

    // N.B. Running the target may unset the currently selected thread and frame.  We don't want to do that either, 
    // so we should arrange to reset them as well.
    
    lldb::ThreadSP selected_thread_sp = exe_ctx.process->GetThreadList().GetSelectedThread();
    lldb::StackFrameSP selected_frame_sp;
    
    uint32_t selected_tid; 
    if (selected_thread_sp != NULL)
    {
        selected_tid = selected_thread_sp->GetIndexID();
        selected_frame_sp = selected_thread_sp->GetSelectedFrame();
    }
    else
    {
        selected_tid = LLDB_INVALID_THREAD_ID;
    }

    exe_ctx.thread->QueueThreadPlan(thread_plan_sp, true);
    
    Listener listener("lldb.process.listener.run-thread-plan");
    
    // This process event hijacker Hijacks the Public events and its destructor makes sure that the process events get 
    // restored on exit to the function.
    
    ProcessEventHijacker run_thread_plan_hijacker (*this, &listener);
        
    lldb::LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_STEP | LIBLLDB_LOG_PROCESS));
    if (log)
    {
        StreamString s;
        thread_plan_sp->GetDescription(&s, lldb::eDescriptionLevelVerbose);
        log->Printf ("Process::RunThreadPlan(): Resuming thread %u - 0x%4.4x to run thread plan \"%s\".",  
                     exe_ctx.thread->GetIndexID(), 
                     exe_ctx.thread->GetID(), 
                     s.GetData());
    }
    
    bool got_event;
    lldb::EventSP event_sp;
    lldb::StateType stop_state = lldb::eStateInvalid;
    
    TimeValue* timeout_ptr = NULL;
    TimeValue real_timeout;
    
    bool first_timeout = true;
    bool do_resume = true;
    
    while (1)
    {
        // We usually want to resume the process if we get to the top of the loop.
        // The only exception is if we get two running events with no intervening
        // stop, which can happen, we will just wait for then next stop event.
        
        if (do_resume)
        {
            // Do the initial resume and wait for the running event before going further.
    
            Error resume_error = exe_ctx.process->Resume ();
            if (!resume_error.Success())
            {
                errors.Printf("Error resuming inferior: \"%s\".\n", resume_error.AsCString());
                return_value = eExecutionSetupError;
                break;
            }
    
            real_timeout = TimeValue::Now();
            real_timeout.OffsetWithMicroSeconds(500000);
            timeout_ptr = &real_timeout;
            
            got_event = listener.WaitForEvent(NULL, event_sp);
            if (!got_event) 
            {
                if (log)
                    log->Printf("Didn't get any event after initial resume, exiting.");

                errors.Printf("Didn't get any event after initial resume, exiting.");
                return_value = eExecutionSetupError;
                break;
            }
            
            stop_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());
            if (stop_state != eStateRunning)
            {
                if (log)
                    log->Printf("Didn't get running event after initial resume, got %s instead.", StateAsCString(stop_state));

                errors.Printf("Didn't get running event after initial resume, got %s instead.", StateAsCString(stop_state));
                return_value = eExecutionSetupError;
                break;
            }
        
            if (log)
                log->Printf ("Resuming succeeded.");
            // We need to call the function synchronously, so spin waiting for it to return.
            // If we get interrupted while executing, we're going to lose our context, and
            // won't be able to gather the result at this point.
            // We set the timeout AFTER the resume, since the resume takes some time and we
            // don't want to charge that to the timeout.
            
            if (single_thread_timeout_usec != 0)
            {
                real_timeout = TimeValue::Now();
                if (first_timeout)
                    real_timeout.OffsetWithMicroSeconds(single_thread_timeout_usec);
                else
                    real_timeout.OffsetWithSeconds(10);
                    
                timeout_ptr = &real_timeout;
            }
        }
        else
        {
            if (log)
                log->Printf ("Handled an extra running event.");
            do_resume = true;
        }
        
        // Now wait for the process to stop again:
        stop_state = lldb::eStateInvalid;
        event_sp.reset();
        got_event = listener.WaitForEvent (timeout_ptr, event_sp);
        
        if (got_event)
        {
            if (event_sp.get())
            {
                bool keep_going = false;
                stop_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());
                if (log)
                    log->Printf("In while loop, got event: %s.", StateAsCString(stop_state));
                    
                switch (stop_state)
                {
                case lldb::eStateStopped:
                {
                    // Yay, we're done.  Now make sure that our thread plan actually completed.
                    ThreadSP thread_sp = exe_ctx.process->GetThreadList().FindThreadByIndexID (thread_idx_id);
                    if (!thread_sp)
                    {
                        // Ooh, our thread has vanished.  Unlikely that this was successful execution...
                        if (log)
                            log->Printf ("Execution completed but our thread (index-id=%u) has vanished.", thread_idx_id);
                        return_value = eExecutionInterrupted;
                    }
                    else
                    {
                        StopInfoSP stop_info_sp = thread_sp->GetStopInfo ();
                        StopReason stop_reason = stop_info_sp->GetStopReason();
                        if (stop_reason == eStopReasonPlanComplete)
                        {
                            if (log)
                                log->Printf ("Execution completed successfully.");
                            // Now mark this plan as private so it doesn't get reported as the stop reason
                            // after this point.  
                            if (thread_plan_sp)
                                thread_plan_sp->SetPrivate (orig_plan_private);
                            return_value = eExecutionCompleted;
                        }
                        else
                        {
                            if (log)
                                log->Printf ("Thread plan didn't successfully complete.");
                                
                            return_value = eExecutionInterrupted;
                        }
                    }
                }        
                break;
                case lldb::eStateCrashed:
                    if (log)
                        log->Printf ("Execution crashed.");
                    return_value = eExecutionInterrupted;
                    break;
                case lldb::eStateRunning:
                    do_resume = false;
                    keep_going = true;
                    break;
                default:
                    if (log)
                        log->Printf("Execution stopped with unexpected state: %s.", StateAsCString(stop_state));
                        
                    errors.Printf ("Execution stopped with unexpected state.");
                    return_value = eExecutionInterrupted;
                    break;
                }
                if (keep_going)
                    continue;
                else
                    break;
            } 
            else
            {
                if (log)
                    log->Printf ("got_event was true, but the event pointer was null.  How odd...");
                return_value = eExecutionInterrupted;
                break;
            }
        }
        else
        {
            // If we didn't get an event that means we've timed out...
            // We will interrupt the process here.  Depending on what we were asked to do we will
            // either exit, or try with all threads running for the same timeout.
            // Not really sure what to do if Halt fails here...
            
            if (log) {
                if (try_all_threads)
                {
                    if (first_timeout)
                        log->Printf ("Process::RunThreadPlan(): Running function with timeout: %d timed out, "
                                     "trying with all threads enabled.",
                                     single_thread_timeout_usec);
                    else
                        log->Printf ("Process::RunThreadPlan(): Restarting function with all threads enabled "
                                     "and timeout: %d timed out.",
                                     single_thread_timeout_usec);
                }
                else
                    log->Printf ("Process::RunThreadPlan(): Running function with timeout: %d timed out, "
                                 "halt and abandoning execution.", 
                                 single_thread_timeout_usec);
            }
            
            Error halt_error = exe_ctx.process->Halt();
            if (halt_error.Success())
            {
                if (log)
                    log->Printf ("Process::RunThreadPlan(): Halt succeeded.");
                    
                // If halt succeeds, it always produces a stopped event.  Wait for that:
                
                real_timeout = TimeValue::Now();
                real_timeout.OffsetWithMicroSeconds(500000);

                got_event = listener.WaitForEvent(&real_timeout, event_sp);
                
                if (got_event)
                {
                    stop_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());
                    if (log)
                    {
                        log->Printf ("Process::RunThreadPlan(): Stopped with event: %s", StateAsCString(stop_state));
                        if (stop_state == lldb::eStateStopped 
                            && Process::ProcessEventData::GetInterruptedFromEvent(event_sp.get()))
                            log->Printf ("    Event was the Halt interruption event.");
                    }
                    
                    if (stop_state == lldb::eStateStopped)
                    {
                        // Between the time we initiated the Halt and the time we delivered it, the process could have
                        // already finished its job.  Check that here:
                        
                        if (exe_ctx.thread->IsThreadPlanDone (thread_plan_sp.get()))
                        {
                            if (log)
                                log->Printf ("Process::RunThreadPlan(): Even though we timed out, the call plan was done.  "
                                             "Exiting wait loop.");
                            return_value = eExecutionCompleted;
                            break;
                        }

                        if (!try_all_threads)
                        {
                            if (log)
                                log->Printf ("try_all_threads was false, we stopped so now we're quitting.");
                            return_value = eExecutionInterrupted;
                            break;
                        }
                        
                        if (first_timeout)
                        {
                            // Set all the other threads to run, and return to the top of the loop, which will continue;
                            first_timeout = false;
                            thread_plan_sp->SetStopOthers (false);
                            if (log)
                                log->Printf ("Process::RunThreadPlan(): About to resume.");

                            continue;
                        }
                        else
                        {
                            // Running all threads failed, so return Interrupted.
                            if (log)
                                log->Printf("Process::RunThreadPlan(): running all threads timed out.");
                            return_value = eExecutionInterrupted;
                            break;
                        }
                    }
                }
                else
                {   if (log)
                        log->Printf("Process::RunThreadPlan(): halt said it succeeded, but I got no event.  "
                                "I'm getting out of here passing Interrupted.");
                    return_value = eExecutionInterrupted;
                    break;
                }
            }
            else
            {
                // This branch is to work around some problems with gdb-remote's Halt.  It is a little racy, and can return 
                // an error from halt, but if you wait a bit you'll get a stopped event anyway.
                if (log)
                    log->Printf ("Process::RunThreadPlan(): halt failed: error = \"%s\", I'm just going to wait a little longer and see if I get a stopped event.", 
                                 halt_error.AsCString());                
                real_timeout = TimeValue::Now();
                real_timeout.OffsetWithMicroSeconds(500000);
                timeout_ptr = &real_timeout;
                got_event = listener.WaitForEvent(&real_timeout, event_sp);
                if (!got_event || event_sp.get() == NULL)
                {
                    // This is not going anywhere, bag out.
                    if (log)
                        log->Printf ("Process::RunThreadPlan(): halt failed: and waiting for the stopped event failed.");
                    return_value = eExecutionInterrupted;
                    break;                
                }
                else
                {
                    stop_state = Process::ProcessEventData::GetStateFromEvent(event_sp.get());
                    if (log)
                        log->Printf ("Process::RunThreadPlan(): halt failed: but then I got a stopped event.  Whatever...");
                    if (stop_state == lldb::eStateStopped)
                    {
                        // Between the time we initiated the Halt and the time we delivered it, the process could have
                        // already finished its job.  Check that here:
                        
                        if (exe_ctx.thread->IsThreadPlanDone (thread_plan_sp.get()))
                        {
                            if (log)
                                log->Printf ("Process::RunThreadPlan(): Even though we timed out, the call plan was done.  "
                                             "Exiting wait loop.");
                            return_value = eExecutionCompleted;
                            break;
                        }

                        if (first_timeout)
                        {
                            // Set all the other threads to run, and return to the top of the loop, which will continue;
                            first_timeout = false;
                            thread_plan_sp->SetStopOthers (false);
                            if (log)
                                log->Printf ("Process::RunThreadPlan(): About to resume.");

                            continue;
                        }
                        else
                        {
                            // Running all threads failed, so return Interrupted.
                            if (log)
                                log->Printf("Process::RunThreadPlan(): running all threads timed out.");
                            return_value = eExecutionInterrupted;
                            break;
                        }
                    }
                    else
                    {
                        log->Printf ("Process::RunThreadPlan(): halt failed, I waited and didn't get"
                                     " a stopped event, instead got %s.", StateAsCString(stop_state));
                        return_value = eExecutionInterrupted;
                        break;                
                    }
                }
            }

        }
        
    }  // END WAIT LOOP
    
    // Now do some processing on the results of the run:
    if (return_value == eExecutionInterrupted)
    {
        if (log)
        {
            StreamString s;
            if (event_sp)
                event_sp->Dump (&s);
            else
            {
                log->Printf ("Process::RunThreadPlan(): Stop event that interrupted us is NULL.");
            }

            StreamString ts;

            const char *event_explanation;                
            
            do 
            {
                const Process::ProcessEventData *event_data = Process::ProcessEventData::GetEventDataFromEvent (event_sp.get());

                if (!event_data)
                {
                    event_explanation = "<no event data>";
                    break;
                }
                
                Process *process = event_data->GetProcessSP().get();

                if (!process)
                {
                    event_explanation = "<no process>";
                    break;
                }
                
                ThreadList &thread_list = process->GetThreadList();
                
                uint32_t num_threads = thread_list.GetSize();
                uint32_t thread_index;
                
                ts.Printf("<%u threads> ", num_threads);
                
                for (thread_index = 0;
                     thread_index < num_threads;
                     ++thread_index)
                {
                    Thread *thread = thread_list.GetThreadAtIndex(thread_index).get();
                    
                    if (!thread)
                    {
                        ts.Printf("<?> ");
                        continue;
                    }
                    
                    ts.Printf("<0x%4.4x ", thread->GetID());
                    RegisterContext *register_context = thread->GetRegisterContext().get();
                    
                    if (register_context)
                        ts.Printf("[ip 0x%llx] ", register_context->GetPC());
                    else
                        ts.Printf("[ip unknown] ");
                    
                    lldb::StopInfoSP stop_info_sp = thread->GetStopInfo();
                    if (stop_info_sp)
                    {
                        const char *stop_desc = stop_info_sp->GetDescription();
                        if (stop_desc)
                            ts.PutCString (stop_desc);
                    }
                    ts.Printf(">");
                }
                
                event_explanation = ts.GetData();
            } while (0);
            
            if (log)
                log->Printf("Process::RunThreadPlan(): execution interrupted: %s %s", s.GetData(), event_explanation);
                
            if (discard_on_error && thread_plan_sp)
            {
                exe_ctx.thread->DiscardThreadPlansUpToPlan (thread_plan_sp);
            }
        }
    }
    else if (return_value == eExecutionSetupError)
    {
        if (log)
            log->Printf("Process::RunThreadPlan(): execution set up error.");
            
        if (discard_on_error && thread_plan_sp)
        {
            exe_ctx.thread->DiscardThreadPlansUpToPlan (thread_plan_sp);
        }
    }
    else
    {
        if (exe_ctx.thread->IsThreadPlanDone (thread_plan_sp.get()))
        {
            if (log)
                log->Printf("Process::RunThreadPlan(): thread plan is done");
            return_value = eExecutionCompleted;
        }
        else if (exe_ctx.thread->WasThreadPlanDiscarded (thread_plan_sp.get()))
        {
            if (log)
                log->Printf("Process::RunThreadPlan(): thread plan was discarded");
            return_value = eExecutionDiscarded;
        }
        else
        {
            if (log)
                log->Printf("Process::RunThreadPlan(): thread plan stopped in mid course");
            if (discard_on_error && thread_plan_sp)
            {
                if (log)
                    log->Printf("Process::RunThreadPlan(): discarding thread plan 'cause discard_on_error is set.");
                exe_ctx.thread->DiscardThreadPlansUpToPlan (thread_plan_sp);
            }
        }
    }
                
    // Thread we ran the function in may have gone away because we ran the target
    // Check that it's still there.
    exe_ctx.thread = exe_ctx.process->GetThreadList().FindThreadByIndexID(thread_idx_id, true).get();
    if (exe_ctx.thread)
        exe_ctx.frame = exe_ctx.thread->GetStackFrameAtIndex(0).get();
    
    // Also restore the current process'es selected frame & thread, since this function calling may
    // be done behind the user's back.
    
    if (selected_tid != LLDB_INVALID_THREAD_ID)
    {
        if (exe_ctx.process->GetThreadList().SetSelectedThreadByIndexID (selected_tid))
        {
            // We were able to restore the selected thread, now restore the frame:
            exe_ctx.process->GetThreadList().GetSelectedThread()->SetSelectedFrame(selected_frame_sp.get());
        }
    }
    
    return return_value;
}

const char *
Process::ExecutionResultAsCString (ExecutionResults result)
{
    const char *result_name;
    
    switch (result)
    {
        case eExecutionCompleted:
            result_name = "eExecutionCompleted";
            break;
        case eExecutionDiscarded:
            result_name = "eExecutionDiscarded";
            break;
        case eExecutionInterrupted:
            result_name = "eExecutionInterrupted";
            break;
        case eExecutionSetupError:
            result_name = "eExecutionSetupError";
            break;
        case eExecutionTimedOut:
            result_name = "eExecutionTimedOut";
            break;
    }
    return result_name;
}

void
Process::GetStatus (Stream &strm)
{
    const StateType state = GetState();
    if (StateIsStoppedState(state))
    {
        if (state == eStateExited)
        {
            int exit_status = GetExitStatus();
            const char *exit_description = GetExitDescription();
            strm.Printf ("Process %d exited with status = %i (0x%8.8x) %s\n",
                          GetID(),
                          exit_status,
                          exit_status,
                          exit_description ? exit_description : "");
        }
        else
        {
            if (state == eStateConnected)
                strm.Printf ("Connected to remote target.\n");
            else
                strm.Printf ("Process %d %s\n", GetID(), StateAsCString (state));
        }
    }
    else
    {
        strm.Printf ("Process %d is running.\n", GetID());
    }
}

size_t
Process::GetThreadStatus (Stream &strm, 
                          bool only_threads_with_stop_reason,
                          uint32_t start_frame, 
                          uint32_t num_frames, 
                          uint32_t num_frames_with_source)
{
    size_t num_thread_infos_dumped = 0;
    
    const size_t num_threads = GetThreadList().GetSize();
    for (uint32_t i = 0; i < num_threads; i++)
    {
        Thread *thread = GetThreadList().GetThreadAtIndex(i).get();
        if (thread)
        {
            if (only_threads_with_stop_reason)
            {
                if (thread->GetStopInfo().get() == NULL)
                    continue;
            }
            thread->GetStatus (strm, 
                               start_frame, 
                               num_frames, 
                               num_frames_with_source);
            ++num_thread_infos_dumped;
        }
    }
    return num_thread_infos_dumped;
}

//--------------------------------------------------------------
// class Process::SettingsController
//--------------------------------------------------------------

Process::SettingsController::SettingsController () :
    UserSettingsController ("process", Target::GetSettingsController())
{
    m_default_settings.reset (new ProcessInstanceSettings (*this, 
                                                           false,
                                                           InstanceSettings::GetDefaultName().AsCString()));
}

Process::SettingsController::~SettingsController ()
{
}

lldb::InstanceSettingsSP
Process::SettingsController::CreateInstanceSettings (const char *instance_name)
{
    ProcessInstanceSettings *new_settings = new ProcessInstanceSettings (*GetSettingsController(),
                                                                         false, 
                                                                         instance_name);
    lldb::InstanceSettingsSP new_settings_sp (new_settings);
    return new_settings_sp;
}

//--------------------------------------------------------------
// class ProcessInstanceSettings
//--------------------------------------------------------------

ProcessInstanceSettings::ProcessInstanceSettings
(
    UserSettingsController &owner, 
    bool live_instance, 
    const char *name
) :
    InstanceSettings (owner, name ? name : InstanceSettings::InvalidName().AsCString(), live_instance), 
    m_run_args (),
    m_env_vars (),
    m_input_path (),
    m_output_path (),
    m_error_path (),
    m_disable_aslr (true),
    m_disable_stdio (false),
    m_inherit_host_env (true),
    m_got_host_env (false)
{
    // CopyInstanceSettings is a pure virtual function in InstanceSettings; it therefore cannot be called
    // until the vtables for ProcessInstanceSettings are properly set up, i.e. AFTER all the initializers.
    // For this reason it has to be called here, rather than in the initializer or in the parent constructor.
    // This is true for CreateInstanceName() too.

    if (GetInstanceName () == InstanceSettings::InvalidName())
    {
        ChangeInstanceName (std::string (CreateInstanceName().AsCString()));
        m_owner.RegisterInstanceSettings (this);
    }

    if (live_instance)
    {
        const lldb::InstanceSettingsSP &pending_settings = m_owner.FindPendingSettings (m_instance_name);
        CopyInstanceSettings (pending_settings,false);
        //m_owner.RemovePendingSettings (m_instance_name);
    }
}

ProcessInstanceSettings::ProcessInstanceSettings (const ProcessInstanceSettings &rhs) :
    InstanceSettings (*Process::GetSettingsController(), CreateInstanceName().AsCString()),
    m_run_args (rhs.m_run_args),
    m_env_vars (rhs.m_env_vars),
    m_input_path (rhs.m_input_path),
    m_output_path (rhs.m_output_path),
    m_error_path (rhs.m_error_path),
    m_disable_aslr (rhs.m_disable_aslr),
    m_disable_stdio (rhs.m_disable_stdio)
{
    if (m_instance_name != InstanceSettings::GetDefaultName())
    {
        const lldb::InstanceSettingsSP &pending_settings = m_owner.FindPendingSettings (m_instance_name);
        CopyInstanceSettings (pending_settings,false);
        m_owner.RemovePendingSettings (m_instance_name);
    }
}

ProcessInstanceSettings::~ProcessInstanceSettings ()
{
}

ProcessInstanceSettings&
ProcessInstanceSettings::operator= (const ProcessInstanceSettings &rhs)
{
    if (this != &rhs)
    {
        m_run_args = rhs.m_run_args;
        m_env_vars = rhs.m_env_vars;
        m_input_path = rhs.m_input_path;
        m_output_path = rhs.m_output_path;
        m_error_path = rhs.m_error_path;
        m_disable_aslr = rhs.m_disable_aslr;
        m_disable_stdio = rhs.m_disable_stdio;
        m_inherit_host_env = rhs.m_inherit_host_env;
    }

    return *this;
}


void
ProcessInstanceSettings::UpdateInstanceSettingsVariable (const ConstString &var_name,
                                                         const char *index_value,
                                                         const char *value,
                                                         const ConstString &instance_name,
                                                         const SettingEntry &entry,
                                                         VarSetOperationType op,
                                                         Error &err,
                                                         bool pending)
{
    if (var_name == RunArgsVarName())
        UserSettingsController::UpdateStringArrayVariable (op, index_value, m_run_args, value, err);
    else if (var_name == EnvVarsVarName())
    {
        // This is nice for local debugging, but it is isn't correct for
        // remote debugging. We need to stop process.env-vars from being 
        // populated with the host environment and add this as a launch option
        // and get the correct environment from the Target's platform.
        // GetHostEnvironmentIfNeeded ();
        UserSettingsController::UpdateDictionaryVariable (op, index_value, m_env_vars, value, err);
    }
    else if (var_name == InputPathVarName())
        UserSettingsController::UpdateStringVariable (op, m_input_path, value, err);
    else if (var_name == OutputPathVarName())
        UserSettingsController::UpdateStringVariable (op, m_output_path, value, err);
    else if (var_name == ErrorPathVarName())
        UserSettingsController::UpdateStringVariable (op, m_error_path, value, err);
    else if (var_name == DisableASLRVarName())
        UserSettingsController::UpdateBooleanVariable (op, m_disable_aslr, value, true, err);
    else if (var_name == DisableSTDIOVarName ())
        UserSettingsController::UpdateBooleanVariable (op, m_disable_stdio, value, false, err);
}

void
ProcessInstanceSettings::CopyInstanceSettings (const lldb::InstanceSettingsSP &new_settings,
                                               bool pending)
{
    if (new_settings.get() == NULL)
        return;

    ProcessInstanceSettings *new_process_settings = (ProcessInstanceSettings *) new_settings.get();

    m_run_args = new_process_settings->m_run_args;
    m_env_vars = new_process_settings->m_env_vars;
    m_input_path = new_process_settings->m_input_path;
    m_output_path = new_process_settings->m_output_path;
    m_error_path = new_process_settings->m_error_path;
    m_disable_aslr = new_process_settings->m_disable_aslr;
    m_disable_stdio = new_process_settings->m_disable_stdio;
}

bool
ProcessInstanceSettings::GetInstanceSettingsValue (const SettingEntry &entry,
                                                   const ConstString &var_name,
                                                   StringList &value,
                                                   Error *err)
{
    if (var_name == RunArgsVarName())
    {
        if (m_run_args.GetArgumentCount() > 0)
        {
            for (int i = 0; i < m_run_args.GetArgumentCount(); ++i)
                value.AppendString (m_run_args.GetArgumentAtIndex (i));
        }
    }
    else if (var_name == EnvVarsVarName())
    {
        GetHostEnvironmentIfNeeded ();

        if (m_env_vars.size() > 0)
        {
            std::map<std::string, std::string>::iterator pos;
            for (pos = m_env_vars.begin(); pos != m_env_vars.end(); ++pos)
            {
                StreamString value_str;
                value_str.Printf ("%s=%s", pos->first.c_str(), pos->second.c_str());
                value.AppendString (value_str.GetData());
            }
        }
    }
    else if (var_name == InputPathVarName())
    {
        value.AppendString (m_input_path.c_str());
    }
    else if (var_name == OutputPathVarName())
    {
        value.AppendString (m_output_path.c_str());
    }
    else if (var_name == ErrorPathVarName())
    {
        value.AppendString (m_error_path.c_str());
    }
    else if (var_name == InheritHostEnvVarName())
    {
        if (m_inherit_host_env)
            value.AppendString ("true");
        else
            value.AppendString ("false");
    }
    else if (var_name == DisableASLRVarName())
    {
        if (m_disable_aslr)
            value.AppendString ("true");
        else
            value.AppendString ("false");
    }
    else if (var_name == DisableSTDIOVarName())
    {
        if (m_disable_stdio)
            value.AppendString ("true");
        else
            value.AppendString ("false");
    }
    else
    {
        if (err)
            err->SetErrorStringWithFormat ("unrecognized variable name '%s'", var_name.AsCString());
        return false;
    }
    return true;
}

const ConstString
ProcessInstanceSettings::CreateInstanceName ()
{
    static int instance_count = 1;
    StreamString sstr;

    sstr.Printf ("process_%d", instance_count);
    ++instance_count;

    const ConstString ret_val (sstr.GetData());
    return ret_val;
}

const ConstString &
ProcessInstanceSettings::RunArgsVarName ()
{
    static ConstString run_args_var_name ("run-args");

    return run_args_var_name;
}

const ConstString &
ProcessInstanceSettings::EnvVarsVarName ()
{
    static ConstString env_vars_var_name ("env-vars");

    return env_vars_var_name;
}

const ConstString &
ProcessInstanceSettings::InheritHostEnvVarName ()
{
    static ConstString g_name ("inherit-env");

    return g_name;
}

const ConstString &
ProcessInstanceSettings::InputPathVarName ()
{
  static ConstString input_path_var_name ("input-path");

    return input_path_var_name;
}

const ConstString &
ProcessInstanceSettings::OutputPathVarName ()
{
    static ConstString output_path_var_name ("output-path");

    return output_path_var_name;
}

const ConstString &
ProcessInstanceSettings::ErrorPathVarName ()
{
    static ConstString error_path_var_name ("error-path");

    return error_path_var_name;
}

const ConstString &
ProcessInstanceSettings::DisableASLRVarName ()
{
    static ConstString disable_aslr_var_name ("disable-aslr");

    return disable_aslr_var_name;
}

const ConstString &
ProcessInstanceSettings::DisableSTDIOVarName ()
{
    static ConstString disable_stdio_var_name ("disable-stdio");
    
    return disable_stdio_var_name;
}

//--------------------------------------------------
// SettingsController Variable Tables
//--------------------------------------------------

SettingEntry
Process::SettingsController::global_settings_table[] =
{
  //{ "var-name",    var-type  ,        "default", enum-table, init'd, hidden, "help-text"},
    {  NULL, eSetVarTypeNone, NULL, NULL, 0, 0, NULL }
};


SettingEntry
Process::SettingsController::instance_settings_table[] =
{
  //{ "var-name",       var-type,              "default",       enum-table, init'd, hidden, "help-text"},
    { "run-args",       eSetVarTypeArray,       NULL,           NULL,       false,  false,  "A list containing all the arguments to be passed to the executable when it is run." },
    { "env-vars",       eSetVarTypeDictionary,  NULL,           NULL,       false,  false,  "A list of all the environment variables to be passed to the executable's environment, and their values." },
    { "inherit-env",    eSetVarTypeBoolean,     "true",         NULL,       false,  false,  "Inherit the environment from the process that is running LLDB." },
    { "input-path",     eSetVarTypeString,      NULL,           NULL,       false,  false,  "The file/path to be used by the executable program for reading its input." },
    { "output-path",    eSetVarTypeString,      NULL,           NULL,       false,  false,  "The file/path to be used by the executable program for writing its output." },
    { "error-path",     eSetVarTypeString,      NULL,           NULL,       false,  false,  "The file/path to be used by the executable program for writings its error messages." },
    { "plugin",         eSetVarTypeEnum,        NULL,           NULL,       false,  false,  "The plugin to be used to run the process." }, 
    { "disable-aslr",   eSetVarTypeBoolean,     "true",         NULL,       false,  false,  "Disable Address Space Layout Randomization (ASLR)" },
    { "disable-stdio",  eSetVarTypeBoolean,     "false",        NULL,       false,  false,  "Disable stdin/stdout for process (e.g. for a GUI application)" },
    {  NULL,            eSetVarTypeNone,        NULL,           NULL,       false,  false,  NULL }
};