| #===-- Makefile.common - Common make rules for LLVM -------*- makefile -*--==== |
| # |
| # This file is included by all of the LLVM makefiles. This file defines common |
| # rules to do things like compile a .cpp file or generate dependancy info. |
| # These are platform dependant, so this is the file used to specify these |
| # system dependant operations. |
| # |
| # The following functionality may be set by setting incoming variables: |
| # |
| # 1. LEVEL - The level of the current subdirectory from the top of the |
| # MagicStats view. This level should be expressed as a path, for |
| # example, ../.. for two levels deep. |
| # |
| # 2. DIRS - A list of subdirectories to be built. Fake targets are set up |
| # so that each of the targets "all", "install", and "clean" each build. |
| # the subdirectories before the local target. |
| # |
| # 3. Source - If specified, this sets the source code filenames. If this |
| # is not set, it defaults to be all of the .cpp, .c, .y, and .l files |
| # in the current directory. Also, if you want to build files in addition |
| # to the local files, you can use the ExtraSource variable |
| # |
| #===-----------------------------------------------------------------------==== |
| |
| # These are options that can either be enabled here, or can be enabled on the |
| # make command line (ie, make ENABLE_PROFILING=1) |
| # |
| |
| # When ENABLE_PROFILING is enabled, the llvm source base is built with profile |
| # information to allow gprof to be used to get execution frequencies. |
| # |
| #ENABLE_PROFILING = 1 |
| |
| # When ENABLE_PURIFY is enabled, the LLVM tools are linked with purify (which |
| # must be locally installed) to allow for some automated memory error debugging. |
| # |
| #ENABLE_PURIFY = 1 |
| |
| # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are |
| # turned on, and Debug builds are turned off. |
| # |
| #ENABLE_OPTIMIZED = 1 |
| |
| # If you do not want to build into /shared, uncomment this |
| # |
| #BUILD_ROOT = . |
| |
| ifdef SHARED_LIBRARY |
| # if SHARED_LIBRARY is specified, the default is to build the dynamic lib |
| dynamic :: |
| endif |
| |
| # Default Rule: Make sure it's also a :: rule |
| all :: |
| |
| # Default for install is to at least build everything... |
| install :: |
| |
| |
| # Figure out which directory to build stuff into. We want to build into the |
| # /shared directory by default because it is guaranteed to be local to the |
| # current machine. |
| # |
| ifdef BUILD_ROOT |
| BUILD_ROOT_TOP := $(LEVEL) |
| else |
| |
| LOGIN_NAME := $(shell whoami) |
| CUR_DIRECTORY := $(shell pwd) |
| BUILD_ROOT := /shared/$(LOGIN_NAME)$(patsubst $(HOME)%,%,$(CUR_DIRECTORY)) |
| |
| # Calculate the BUILD_ROOT_TOP variable, which is the top of the llvm/ tree. |
| # Note that although this is just equal to $(BUILD_ROOT)/$(LEVEL), we cannot use |
| # this expression because some of the directories on the source tree may not |
| # exist in the build tree (for example the test/ heirarchy). Thus we evaluate |
| # the directory to eliminate the ../'s |
| # |
| TOP_DIRECTORY := $(shell cd $(LEVEL); pwd) |
| BUILD_ROOT_TOP := /shared/$(LOGIN_NAME)$(patsubst $(HOME)%,%,$(TOP_DIRECTORY)) |
| endif |
| |
| #-------------------------------------------------------------------- |
| # Installation configuration options... |
| #-------------------------------------------------------------------- |
| |
| #BinInstDir=/usr/local/bin |
| #LibInstDir=/usrl/local/lib/xxx |
| #DocInstDir=/usr/doc/xxx |
| |
| BURG = /home/vadve/vadve/Research/DynOpt/Burg/burg |
| BURG_OPTS = -I |
| |
| |
| PURIFY = /usr/dcs/applications/purify/bin/purify -cache-dir="$(HOME)/purifycache" -chain-length="30" -messages=all |
| |
| # Shorthand for commonly accessed directories |
| LIBDEBUG := $(BUILD_ROOT_TOP)/lib/Debug |
| LIBRELEASE := $(BUILD_ROOT_TOP)/lib/Release |
| TOOLDEBUG := $(BUILD_ROOT_TOP)/tools/Debug |
| TOOLRELEASE := $(BUILD_ROOT_TOP)/tools/Release |
| |
| #--------------------------------------------------------- |
| # Compilation options... |
| #--------------------------------------------------------- |
| |
| # Special tools used while building |
| RunBurg := $(BURG) $(BURG_OPTS) |
| |
| # Enable this for profiling support with 'gprof' |
| ifdef ENABLE_PROFILING |
| PROFILE = -pg |
| else |
| PROFILE = |
| endif |
| |
| # -Wno-unused-parameter |
| CompileCommonOpts := $(PROFILE) -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include |
| |
| # Compile a file, don't link... |
| Compile := $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) |
| CompileG := $(Compile) -g -D_DEBUG |
| CompileO := $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fnonnull-objects -freg-struct-return -fshort-enums |
| |
| # Link final executable |
| |
| ifdef ENABLE_PURIFY # To enable purify, build with 'gmake ENABLE_PURIFY=1' |
| Link := $(PURIFY) $(CXX) $(PROFILE) -static |
| else |
| Link := $(CXX) $(PROFILE) |
| endif |
| LinkG := $(Link) -g -L $(LIBDEBUG) |
| LinkO := $(Link) -O3 -L $(LIBRELEASE) |
| |
| # Create a .so file from a .o files... |
| #MakeSO := $(CXX) -shared $(PROFILE) |
| MakeSO := $(CXX) -G $(PROFILE) |
| MakeSOO := $(MakeSO) -O3 |
| |
| # Create one .o file from a bunch of .o files... |
| Relink = ld -r |
| |
| # Create dependancy file from CPP file, send to stdout. |
| Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS) |
| |
| # Archive a bunch of .o files into a .a file... |
| AR = ar cq |
| |
| #---------------------------------------------------------- |
| |
| # Source includes all of the cpp files, and objects are derived from the |
| # source files... |
| # The local Makefile can list other Source files via ExtraSource = ... |
| # |
| Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l) |
| |
| Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source))))) |
| ObjectsO = $(addprefix $(BUILD_ROOT)/Release/,$(Objs))) |
| ObjectsG = $(addprefix $(BUILD_ROOT)/Debug/,$(Objs)) |
| |
| |
| #--------------------------------------------------------- |
| # Handle the DIRS option |
| #--------------------------------------------------------- |
| |
| ifdef DIRS # Only do this if we're using DIRS! |
| |
| all :: $(addsuffix /.makeall , $(DIRS)) |
| install :: $(addsuffix /.makeinstall, $(DIRS)) |
| clean :: $(addsuffix /.makeclean , $(DIRS)) |
| |
| %/.makeall %/.makeclean %/.makeinstall: |
| cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@) |
| endif |
| |
| #--------------------------------------------------------- |
| # Handle the LIBRARYNAME option - used when building libs... |
| #--------------------------------------------------------- |
| # |
| # When libraries are built, they are allowed to optionally define the |
| # DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file |
| # from being built for the library. This .o files may then be linked to by a |
| # tool if the tool does not need (or want) the semantics a .a file provides |
| # (linking in only object files that are "needed"). If a library is never to |
| # be used in this way, it is better to define DONT_BUILD_RELINKED, and define |
| # BUILD_ARCHIVE instead. |
| # |
| # Some libraries must be built as .a files (libscalar for example) because if |
| # it's built as a .o file, then all of the constituent .o files in it will be |
| # linked into tools (for example gccas) even if they only use one of the parts |
| # of it. For this reason, sometimes it's useful to use libraries as .a files. |
| |
| ifdef LIBRARYNAME |
| |
| LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so |
| LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so |
| LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a |
| LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a |
| LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o |
| LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o |
| |
| |
| ifndef ENABLE_OPTIMIZED |
| BUILD_LIBNAME_G := $(LIBNAME_G) |
| ifndef DONT_BUILD_RELINKED |
| BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG) |
| endif |
| ifdef BUILD_ARCHIVE |
| BUILD_LIBNAME_AG := $(LIBNAME_AG) |
| endif |
| endif |
| |
| # If optimized builds are enabled... |
| ifdef ENABLE_OPTIMIZED |
| BUILD_LIBNAME_O := $(LIBNAME_O) |
| ifndef DONT_BUILD_RELINKED |
| BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO) |
| endif |
| ifdef BUILD_ARCHIVE |
| BUILD_LIBNAME_AO := $(LIBNAME_AO) |
| endif |
| endif |
| |
| all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug |
| all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release |
| dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) # .so files |
| |
| $(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir |
| @echo ======= Linking $(LIBRARYNAME) release library ======= |
| $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts) |
| |
| $(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir |
| @echo ======= Linking $(LIBRARYNAME) debug library ======= |
| $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts) |
| |
| $(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir |
| @echo ======= Linking $(LIBRARYNAME) release library ======= |
| @rm -f $@ |
| $(AR) $@ $(ObjectsO) $(LibSubDirs) |
| |
| $(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir |
| @echo ======= Linking $(LIBRARYNAME) debug library ======= |
| @rm -f $@ |
| $(AR) $@ $(ObjectsG) $(LibSubDirs) |
| |
| $(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir |
| $(Relink) -o $@ $(ObjectsO) $(LibSubDirs) |
| |
| $(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir |
| $(Relink) -o $@ $(ObjectsG) $(LibSubDirs) |
| |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Create a TAGS database for emacs |
| #------------------------------------------------------------------------ |
| |
| ifeq ($(LEVEL), .) |
| tags: |
| etags -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'` |
| all:: tags |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Handle the TOOLNAME option - used when building tool executables... |
| #------------------------------------------------------------------------ |
| # |
| # The TOOLNAME option should be used with a USEDLIBS variable that tells the |
| # libraries (and the order of the libs) that should be linked to the |
| # tool. USEDLIBS should contain a list of library names (some with .a extension) |
| # that are automatically linked in as .o files unless the .a suffix is added. |
| # |
| ifdef TOOLNAME |
| |
| # TOOLEXENAME* - These compute the output filenames to generate... |
| TOOLEXENAME_G := $(BUILD_ROOT_TOP)/tools/Debug/$(TOOLNAME) |
| TOOLEXENAME_O := $(BUILD_ROOT_TOP)/tools/Release/$(TOOLNAME) |
| TOOLEXENAMES := $(TOOLEXENAME_G) |
| ifdef ENABLE_OPTIMIZED |
| TOOLEXENAMES += $(TOOLEXENAME_O) |
| endif |
| |
| # USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc. |
| USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) |
| USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS)) |
| USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS)) |
| |
| |
| # USED_LIB_PATHS - Compute the path of the libraries used so that tools are |
| # rebuilt if libraries change. This has to make sure to handle .a/.so and .o |
| # files seperately. |
| # |
| STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) |
| USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS)) |
| USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS)) |
| |
| all:: $(TOOLEXENAMES) |
| clean:: |
| rm -f $(TOOLEXENAMES) |
| |
| $(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(BUILD_ROOT_TOP)/tools/Debug/.dir |
| $(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(TOOLLINKOPTS) |
| |
| $(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(BUILD_ROOT_TOP)/tools/Release/.dir |
| $(LinkO) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_O) $(TOOLLINKOPTS) |
| |
| endif |
| |
| |
| |
| #--------------------------------------------------------- |
| .PRECIOUS: $(BUILD_ROOT)/Depend/.dir |
| .PRECIOUS: $(BUILD_ROOT)/Debug/.dir $(BUILD_ROOT)/Release/.dir |
| |
| # Create dependencies for the *.cpp files... |
| $(BUILD_ROOT)/Depend/%.d: %.cpp $(BUILD_ROOT)/Depend/.dir |
| $(Depend) $< | sed 's|$*\.o *|$(BUILD_ROOT)/Release/& $(BUILD_ROOT)/Debug/& $(BUILD_ROOT)/Depend/$(@F)|g' > $@ |
| |
| # Create dependencies for the *.c files... |
| $(BUILD_ROOT)/Depend/%.d: %.c $(BUILD_ROOT)/Depend/.dir |
| $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@ |
| |
| # Create .o files in the ObjectFiles directory from the .cpp and .c files... |
| $(BUILD_ROOT)/Release/%.o: %.cpp $(BUILD_ROOT)/Release/.dir |
| $(CompileO) $< -o $@ |
| |
| #Release/%.o: %.c Release/.dir Depend/.dir |
| # $(CompileOC) $< -o $@ |
| |
| $(BUILD_ROOT)/Debug/%.o: %.cpp $(BUILD_ROOT)/Debug/.dir |
| $(CompileG) $< -o $@ |
| |
| #Debug/%.o: %.c Debug/.dir |
| # $(CompileGC) $< -o $@ |
| |
| # Create a .cpp source file from a flex input file... this uses sed to cut down |
| # on the warnings emited by GCC... |
| %.cpp: %.l |
| flex -t $< | sed '/^find_rule/d' | sed 's/void yyunput/inline void yyunput/' | sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' > $@ |
| |
| # Rule for building the bison parsers... |
| |
| %.cpp %.h : %.y |
| bison -v -d -p $(<:%Parser.y=%) $(basename $@).y |
| mv -f $(basename $@).tab.c $(basename $@).cpp |
| mv -f $(basename $@).tab.h $(basename $@).h |
| |
| # To create the directories... |
| %/.dir: |
| mkdir -p $(@D) |
| @date > $@ |
| |
| # Clean nukes the tree |
| clean:: |
| rm -rf Debug Release Depend |
| rm -f core *.o *.d *.so *~ *.flc |
| |
| # If dependancies were generated for the file that included this file, |
| # include the dependancies now... |
| # |
| SourceDepend := $(addsuffix .d,$(addprefix $(BUILD_ROOT)/Depend/,$(basename $(filter-out Debug/%, $(Source))))) |
| ifneq ($(SourceDepend),) |
| include $(SourceDepend) |
| endif |