Makefile.config.in - fp2-dev/platform/external/llvm - Gitiles

 #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
 #
 #                     The LLVM Compiler Infrastructure
 #
 # This file is distributed under the University of Illinois Open Source
 # License. See LICENSE.TXT for details.
 #
 #===------------------------------------------------------------------------===#
 #
 # This file is included by Makefile.common.  It defines paths and other
 # values specific to a particular installation of LLVM.
 #
 #===------------------------------------------------------------------------===#

 # Define LLVM specific info and directories based on the autoconf variables
 LLVMPackageName   := @PACKAGE_TARNAME@
 LLVMVersion       := @PACKAGE_VERSION@
 LLVM_CONFIGTIME   := @LLVM_CONFIGTIME@

 ###########################################################################
 # Directory Configuration
 #	This section of the Makefile determines what is where.  To be
 #	specific, there are several locations that need to be defined:
 #
 #	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
 #	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
 #
 #	o PROJ_SRC_DIR  : The directory containing the code to build.
 #	o PROJ_SRC_ROOT : The root directory of the code to build.
 #
 #	o PROJ_OBJ_DIR  : The directory in which compiled code will be placed.
 #	o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
 #
 ###########################################################################

 PWD := @BINPWD@
 # Set the project name to LLVM if its not defined
 ifndef PROJECT_NAME
 PROJECT_NAME := $(LLVMPackageName)
 endif

 # The macro below is expanded when 'realpath' is not built-in.
 # Built-in 'realpath' is available on GNU Make 3.81.
 realpath = $(shell cd $(1); $(PWD))

 PROJ_OBJ_DIR  := $(call realpath, .)
 PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))

 CLANG_SRC_ROOT  := @CLANG_SRC_ROOT@

 ifeq ($(PROJECT_NAME),$(LLVMPackageName))
 LLVM_SRC_ROOT   := $(call realpath, @abs_top_srcdir@)
 LLVM_OBJ_ROOT   := $(call realpath, @abs_top_builddir@)
 PROJ_SRC_ROOT   := $(LLVM_SRC_ROOT)
 PROJ_SRC_DIR    := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))

 ifneq ($(CLANG_SRC_ROOT),)
   CLANG_SRC_ROOT:= $(call realpath, $(CLANG_SRC_ROOT))
   PROJ_SRC_DIR  := $(patsubst $(LLVM_SRC_ROOT)/tools/clang%,$(CLANG_SRC_ROOT)%,$(PROJ_SRC_DIR))
 endif

 prefix          := @prefix@
 PROJ_prefix     := $(prefix)
 PROJ_VERSION    := $(LLVMVersion)
 else
 ifndef PROJ_SRC_ROOT
 $(error Projects must define PROJ_SRC_ROOT)
 endif
 ifndef PROJ_OBJ_ROOT
 $(error Projects must define PROJ_OBJ_ROOT)
 endif
 ifndef PROJ_INSTALL_ROOT
 $(error Projects must define PROJ_INSTALL_ROOT)
 endif
 ifndef LLVM_SRC_ROOT
 $(error Projects must define LLVM_SRC_ROOT)
 endif
 ifndef LLVM_OBJ_ROOT
 $(error Projects must define LLVM_OBJ_ROOT)
 endif
 PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
 prefix          := $(PROJ_INSTALL_ROOT)
 PROJ_prefix     := $(prefix)
 ifndef PROJ_VERSION
 PROJ_VERSION := 1.0
 endif
 endif

 INTERNAL_PREFIX := @INTERNAL_PREFIX@
 ifneq ($(INTERNAL_PREFIX),)
 PROJ_internal_prefix := $(INTERNAL_PREFIX)
 else
 PROJ_internal_prefix := $(prefix)
 endif

 PROJ_bindir     := $(PROJ_prefix)/bin
 PROJ_libdir     := $(PROJ_prefix)/lib
 PROJ_datadir    := $(PROJ_prefix)/share
 PROJ_docsdir    := $(PROJ_prefix)/docs/llvm
 PROJ_etcdir     := $(PROJ_prefix)/etc/llvm
 PROJ_includedir := $(PROJ_prefix)/include
 PROJ_infodir    := $(PROJ_prefix)/info
 PROJ_mandir     := $(PROJ_prefix)/share/man

 # Determine if we're on a unix type operating system
 LLVM_ON_UNIX:=@LLVM_ON_UNIX@
 LLVM_ON_WIN32:=@LLVM_ON_WIN32@

 # Host operating system for which LLVM will be run.
 OS=@OS@
 HOST_OS=@HOST_OS@
 # Target operating system for which LLVM will compile for.
 TARGET_OS=@TARGET_OS@

 # Target hardware architecture
 ARCH=@ARCH@
 TARGET_NATIVE_ARCH := $(ARCH)

 # Indicates, whether we're cross-compiling LLVM or not
 LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@

 # Executable file extension for build platform (mainly for
 # tablegen call if we're cross-compiling).
 BUILD_EXEEXT=@BUILD_EXEEXT@

 # Compilers for the build platflorm (mainly for tablegen
 # call if we're cross-compiling).
 BUILD_CC=@BUILD_CC@
 BUILD_CXX=@BUILD_CXX@

 # Triple for configuring build tools when cross-compiling
 BUILD_TRIPLE=@build@

 # Target triple (cpu-vendor-os) for which we should generate code
 TARGET_TRIPLE=@target@

 # Extra options to compile LLVM with
 EXTRA_OPTIONS=@EXTRA_OPTIONS@

 # Extra options to link LLVM with
 EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@

 # Endian-ness of the target
 ENDIAN=@ENDIAN@

 # Path to the C++ compiler to use.  This is an optional setting, which defaults
 # to whatever your gmake defaults to.
 CXX = @CXX@

 # Path to the CC binary, which use used by testcases for native builds.
 CC := @CC@

 # Linker flags.
 LDFLAGS+=@LDFLAGS@

 # Path to the library archiver program.
 AR_PATH = @AR@
 AR = @AR@

 # Path to the nm program
 NM_PATH = @NM@

 # The pathnames of the programs we require to build
 CMP        := @CMP@
 CP         := @CP@
 DATE       := @DATE@
 FIND       := @FIND@
 GREP       := @GREP@
 INSTALL    := @INSTALL@
 MKDIR      := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
 MV         := @MV@
 RANLIB     := @RANLIB@
 RM         := @RM@
 SED        := @SED@
 TAR        := @TAR@

 # Paths to miscellaneous programs we hope are present but might not be
 BZIP2      := @BZIP2@
 CAT        := @CAT@
 DOT        := @DOT@
 DOXYGEN    := @DOXYGEN@
 GROFF      := @GROFF@
 GZIPBIN    := @GZIPBIN@
 OCAMLC     := @OCAMLC@
 OCAMLOPT   := @OCAMLOPT@
 OCAMLDEP   := @OCAMLDEP@
 OCAMLDOC   := @OCAMLDOC@
 GAS        := @GAS@
 POD2HTML   := @POD2HTML@
 POD2MAN    := @POD2MAN@
 PDFROFF    := @PDFROFF@
 RUNTEST    := @RUNTEST@
 TCLSH      := @TCLSH@
 ZIP        := @ZIP@

 HAVE_PTHREAD := @HAVE_PTHREAD@

 LIBS       := @LIBS@

 # Targets that we should build
 TARGETS_TO_BUILD=@TARGETS_TO_BUILD@

 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
 OBJ_ROOT := .

 # What to pass as rpath flag to g++
 RPATH := @RPATH@

 # What to pass as -rdynamic flag to g++
 RDYNAMIC := @RDYNAMIC@

 # These are options that can either be enabled here, or can be enabled on the
 # make command line (ie, make ENABLE_PROFILING=1):

 # When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build.
 #ENABLE_LIBCPP = 0
 ENABLE_LIBCPP = @ENABLE_LIBCPP@

 # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
 # into the "Release" directories. Otherwise, LLVM code is not optimized and
 # output is put in the "Debug" directories.
 #ENABLE_OPTIMIZED = 1
 @ENABLE_OPTIMIZED@

 # When ENABLE_PROFILING is enabled, profile instrumentation is done
 # and output is put into the "<Flavor>+Profile" directories, where
 # <Flavor> is either Debug or Release depending on how other build
 # flags are set. Otherwise, output is put in the <Flavor>
 # directories.
 #ENABLE_PROFILING = 1
 @ENABLE_PROFILING@

 # When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
 # exclude assertion checks, otherwise they are included.
 #DISABLE_ASSERTIONS = 1
 @DISABLE_ASSERTIONS@

 # When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
 # code will include expensive checks, otherwise they are excluded.
 #ENABLE_EXPENSIVE_CHECKS = 0
 @ENABLE_EXPENSIVE_CHECKS@

 # When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
 # symbols.
 #DEBUG_RUNTIME = 1
 @DEBUG_RUNTIME@

 # When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
 # symbols.
 #DEBUG_SYMBOLS = 1
 @DEBUG_SYMBOLS@

 # The compiler flags to use for optimized builds.
 OPTIMIZE_OPTION := @OPTIMIZE_OPTION@

 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
 # information to allow gprof to be used to get execution frequencies.
 #ENABLE_PROFILING = 1

 # When ENABLE_DOCS is disabled, docs/ will not be built.
 ENABLE_DOCS = @ENABLE_DOCS@

 # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
 ENABLE_DOXYGEN = @ENABLE_DOXYGEN@

 # Do we want to enable threads?
 ENABLE_THREADS := @ENABLE_THREADS@

 # Do we want to build with position independent code?
 ENABLE_PIC := @ENABLE_PIC@

 # Do we want to build a shared library and link the tools with it?
 ENABLE_SHARED := @ENABLE_SHARED@

 # Do we want to link the stdc++ into a shared library? (Cygming)
 ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@

 # Use -fvisibility-inlines-hidden?
 ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@

 # Do we want to allow timestamping information into builds?
 ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@

 # This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
 #VERBOSE = 1

 # Enable JIT for this platform
 TARGET_HAS_JIT = @TARGET_HAS_JIT@

 # Environment variable to set to change the runtime shared library search path.
 SHLIBPATH_VAR = @SHLIBPATH_VAR@

 # Shared library extension for host platform.
 SHLIBEXT = @SHLIBEXT@

 # Executable file extension for host platform.
 EXEEXT = @EXEEXT@

 # Things we just assume are "there"
 ECHO := echo

 # Get the options for causing archives to link all their content instead of
 # just missing symbols, and the inverse of that. This is used for certain LLVM
 # tools that permit loadable modules. It ensures that the LLVM symbols will be
 # available to those loadable modules.
 LINKALL := @LINKALL@
 NOLINKALL := @NOLINKALL@

 # Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
 # on the check.
 HUGE_VAL_SANITY = @HUGE_VAL_SANITY@

 # Bindings that we should build
 BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
 ALL_BINDINGS      := @ALL_BINDINGS@
 OCAML_LIBDIR      := @OCAML_LIBDIR@

 # When compiling under Mingw/Cygwin, executables such as tblgen
 # expect Windows paths, whereas the build system uses Unix paths.
 # The function SYSPATH transforms Unix paths into Windows paths.
 ifneq (,$(findstring -mno-cygwin, $(CXX)))
   SYSPATH = $(shell echo $(1) | cygpath -m -f -)
 else
   SYSPATH = $(1)
 endif

 # Location of the plugin header file for gold.
 BINUTILS_INCDIR := @BINUTILS_INCDIR@

 # Optional flags supported by the compiler
 # -Wno-missing-field-initializers
 NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
 # -Wno-variadic-macros
 NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
 # -Wcovered-switch-default
 COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@

 # Was polly found in tools/polly?
 LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
 # Flags supported by the linker.
 # bfd ld / gold --version-script=file
 HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@

 # Flags to control building support for Intel JIT Events API
 USE_INTEL_JITEVENTS := @USE_INTEL_JITEVENTS@
 INTEL_JITEVENTS_INCDIR := @INTEL_JITEVENTS_INCDIR@
 INTEL_JITEVENTS_LIBDIR := @INTEL_JITEVENTS_LIBDIR@

 # Flags to control building support for OProfile JIT API
 USE_OPROFILE := @USE_OPROFILE@
	#===-- Makefile.config - Local configuration for LLVM ------- Makefile ---===#
	#
	# The LLVM Compiler Infrastructure
	#
	# This file is distributed under the University of Illinois Open Source
	# License. See LICENSE.TXT for details.
	#
	#===------------------------------------------------------------------------===#
	#
	# This file is included by Makefile.common. It defines paths and other
	# values specific to a particular installation of LLVM.
	#
	#===------------------------------------------------------------------------===#

	# Define LLVM specific info and directories based on the autoconf variables
	LLVMPackageName := @PACKAGE_TARNAME@
	LLVMVersion := @PACKAGE_VERSION@
	LLVM_CONFIGTIME := @LLVM_CONFIGTIME@

	###########################################################################
	# Directory Configuration
	# This section of the Makefile determines what is where. To be
	# specific, there are several locations that need to be defined:
	#
	# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
	# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
	#
	# o PROJ_SRC_DIR : The directory containing the code to build.
	# o PROJ_SRC_ROOT : The root directory of the code to build.
	#
	# o PROJ_OBJ_DIR : The directory in which compiled code will be placed.
	# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
	#
	###########################################################################

	PWD := @BINPWD@
	# Set the project name to LLVM if its not defined
	ifndef PROJECT_NAME
	PROJECT_NAME := $(LLVMPackageName)
	endif

	# The macro below is expanded when 'realpath' is not built-in.
	# Built-in 'realpath' is available on GNU Make 3.81.
	realpath = $(shell cd $(1); $(PWD))

	PROJ_OBJ_DIR := $(call realpath, .)
	PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))

	CLANG_SRC_ROOT := @CLANG_SRC_ROOT@

	ifeq ($(PROJECT_NAME),$(LLVMPackageName))
	LLVM_SRC_ROOT := $(call realpath, @abs_top_srcdir@)
	LLVM_OBJ_ROOT := $(call realpath, @abs_top_builddir@)
	PROJ_SRC_ROOT := $(LLVM_SRC_ROOT)
	PROJ_SRC_DIR := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))

	ifneq ($(CLANG_SRC_ROOT),)
	CLANG_SRC_ROOT:= $(call realpath, $(CLANG_SRC_ROOT))
	PROJ_SRC_DIR := $(patsubst $(LLVM_SRC_ROOT)/tools/clang%,$(CLANG_SRC_ROOT)%,$(PROJ_SRC_DIR))
	endif

	prefix := @prefix@
	PROJ_prefix := $(prefix)
	PROJ_VERSION := $(LLVMVersion)
	else
	ifndef PROJ_SRC_ROOT
	$(error Projects must define PROJ_SRC_ROOT)
	endif
	ifndef PROJ_OBJ_ROOT
	$(error Projects must define PROJ_OBJ_ROOT)
	endif
	ifndef PROJ_INSTALL_ROOT
	$(error Projects must define PROJ_INSTALL_ROOT)
	endif
	ifndef LLVM_SRC_ROOT
	$(error Projects must define LLVM_SRC_ROOT)
	endif
	ifndef LLVM_OBJ_ROOT
	$(error Projects must define LLVM_OBJ_ROOT)
	endif
	PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
	prefix := $(PROJ_INSTALL_ROOT)
	PROJ_prefix := $(prefix)
	ifndef PROJ_VERSION
	PROJ_VERSION := 1.0
	endif
	endif

	INTERNAL_PREFIX := @INTERNAL_PREFIX@
	ifneq ($(INTERNAL_PREFIX),)
	PROJ_internal_prefix := $(INTERNAL_PREFIX)
	else
	PROJ_internal_prefix := $(prefix)
	endif

	PROJ_bindir := $(PROJ_prefix)/bin
	PROJ_libdir := $(PROJ_prefix)/lib
	PROJ_datadir := $(PROJ_prefix)/share
	PROJ_docsdir := $(PROJ_prefix)/docs/llvm
	PROJ_etcdir := $(PROJ_prefix)/etc/llvm
	PROJ_includedir := $(PROJ_prefix)/include
	PROJ_infodir := $(PROJ_prefix)/info
	PROJ_mandir := $(PROJ_prefix)/share/man

	# Determine if we're on a unix type operating system
	LLVM_ON_UNIX:=@LLVM_ON_UNIX@
	LLVM_ON_WIN32:=@LLVM_ON_WIN32@

	# Host operating system for which LLVM will be run.
	OS=@OS@
	HOST_OS=@HOST_OS@
	# Target operating system for which LLVM will compile for.
	TARGET_OS=@TARGET_OS@

	# Target hardware architecture
	ARCH=@ARCH@
	TARGET_NATIVE_ARCH := $(ARCH)

	# Indicates, whether we're cross-compiling LLVM or not
	LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@

	# Executable file extension for build platform (mainly for
	# tablegen call if we're cross-compiling).
	BUILD_EXEEXT=@BUILD_EXEEXT@

	# Compilers for the build platflorm (mainly for tablegen
	# call if we're cross-compiling).
	BUILD_CC=@BUILD_CC@
	BUILD_CXX=@BUILD_CXX@

	# Triple for configuring build tools when cross-compiling
	BUILD_TRIPLE=@build@

	# Target triple (cpu-vendor-os) for which we should generate code
	TARGET_TRIPLE=@target@

	# Extra options to compile LLVM with
	EXTRA_OPTIONS=@EXTRA_OPTIONS@

	# Extra options to link LLVM with
	EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@

	# Endian-ness of the target
	ENDIAN=@ENDIAN@

	# Path to the C++ compiler to use. This is an optional setting, which defaults
	# to whatever your gmake defaults to.
	CXX = @CXX@

	# Path to the CC binary, which use used by testcases for native builds.
	CC := @CC@

	# Linker flags.
	LDFLAGS+=@LDFLAGS@

	# Path to the library archiver program.
	AR_PATH = @AR@
	AR = @AR@

	# Path to the nm program
	NM_PATH = @NM@

	# The pathnames of the programs we require to build
	CMP := @CMP@
	CP := @CP@
	DATE := @DATE@
	FIND := @FIND@
	GREP := @GREP@
	INSTALL := @INSTALL@
	MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
	MV := @MV@
	RANLIB := @RANLIB@
	RM := @RM@
	SED := @SED@
	TAR := @TAR@

	# Paths to miscellaneous programs we hope are present but might not be
	BZIP2 := @BZIP2@
	CAT := @CAT@
	DOT := @DOT@
	DOXYGEN := @DOXYGEN@
	GROFF := @GROFF@
	GZIPBIN := @GZIPBIN@
	OCAMLC := @OCAMLC@
	OCAMLOPT := @OCAMLOPT@
	OCAMLDEP := @OCAMLDEP@
	OCAMLDOC := @OCAMLDOC@
	GAS := @GAS@
	POD2HTML := @POD2HTML@
	POD2MAN := @POD2MAN@
	PDFROFF := @PDFROFF@
	RUNTEST := @RUNTEST@
	TCLSH := @TCLSH@
	ZIP := @ZIP@

	HAVE_PTHREAD := @HAVE_PTHREAD@

	LIBS := @LIBS@

	# Targets that we should build
	TARGETS_TO_BUILD=@TARGETS_TO_BUILD@

	# Path to directory where object files should be stored during a build.
	# Set OBJ_ROOT to "." if you do not want to use a separate place for
	# object files.
	OBJ_ROOT := .

	# What to pass as rpath flag to g++
	RPATH := @RPATH@

	# What to pass as -rdynamic flag to g++
	RDYNAMIC := @RDYNAMIC@

	# These are options that can either be enabled here, or can be enabled on the
	# make command line (ie, make ENABLE_PROFILING=1):

	# When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build.
	#ENABLE_LIBCPP = 0
	ENABLE_LIBCPP = @ENABLE_LIBCPP@

	# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
	# into the "Release" directories. Otherwise, LLVM code is not optimized and
	# output is put in the "Debug" directories.
	#ENABLE_OPTIMIZED = 1
	@ENABLE_OPTIMIZED@

	# When ENABLE_PROFILING is enabled, profile instrumentation is done
	# and output is put into the "<Flavor>+Profile" directories, where
	# <Flavor> is either Debug or Release depending on how other build
	# flags are set. Otherwise, output is put in the <Flavor>
	# directories.
	#ENABLE_PROFILING = 1
	@ENABLE_PROFILING@

	# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
	# exclude assertion checks, otherwise they are included.
	#DISABLE_ASSERTIONS = 1
	@DISABLE_ASSERTIONS@

	# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
	# code will include expensive checks, otherwise they are excluded.
	#ENABLE_EXPENSIVE_CHECKS = 0
	@ENABLE_EXPENSIVE_CHECKS@

	# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
	# symbols.
	#DEBUG_RUNTIME = 1
	@DEBUG_RUNTIME@

	# When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
	# symbols.
	#DEBUG_SYMBOLS = 1
	@DEBUG_SYMBOLS@

	# The compiler flags to use for optimized builds.
	OPTIMIZE_OPTION := @OPTIMIZE_OPTION@

	# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
	# information to allow gprof to be used to get execution frequencies.
	#ENABLE_PROFILING = 1

	# When ENABLE_DOCS is disabled, docs/ will not be built.
	ENABLE_DOCS = @ENABLE_DOCS@

	# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
	ENABLE_DOXYGEN = @ENABLE_DOXYGEN@

	# Do we want to enable threads?
	ENABLE_THREADS := @ENABLE_THREADS@

	# Do we want to build with position independent code?
	ENABLE_PIC := @ENABLE_PIC@

	# Do we want to build a shared library and link the tools with it?
	ENABLE_SHARED := @ENABLE_SHARED@

	# Do we want to link the stdc++ into a shared library? (Cygming)
	ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@

	# Use -fvisibility-inlines-hidden?
	ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@

	# Do we want to allow timestamping information into builds?
	ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@

	# This option tells the Makefiles to produce verbose output.
	# It essentially prints the commands that make is executing
	#VERBOSE = 1

	# Enable JIT for this platform
	TARGET_HAS_JIT = @TARGET_HAS_JIT@

	# Environment variable to set to change the runtime shared library search path.
	SHLIBPATH_VAR = @SHLIBPATH_VAR@

	# Shared library extension for host platform.
	SHLIBEXT = @SHLIBEXT@

	# Executable file extension for host platform.
	EXEEXT = @EXEEXT@

	# Things we just assume are "there"
	ECHO := echo

	# Get the options for causing archives to link all their content instead of
	# just missing symbols, and the inverse of that. This is used for certain LLVM
	# tools that permit loadable modules. It ensures that the LLVM symbols will be
	# available to those loadable modules.
	LINKALL := @LINKALL@
	NOLINKALL := @NOLINKALL@

	# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
	# on the check.
	HUGE_VAL_SANITY = @HUGE_VAL_SANITY@

	# Bindings that we should build
	BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
	ALL_BINDINGS := @ALL_BINDINGS@
	OCAML_LIBDIR := @OCAML_LIBDIR@

	# When compiling under Mingw/Cygwin, executables such as tblgen
	# expect Windows paths, whereas the build system uses Unix paths.
	# The function SYSPATH transforms Unix paths into Windows paths.
	ifneq (,$(findstring -mno-cygwin, $(CXX)))
	SYSPATH = $(shell echo $(1) \| cygpath -m -f -)
	else
	SYSPATH = $(1)
	endif

	# Location of the plugin header file for gold.
	BINUTILS_INCDIR := @BINUTILS_INCDIR@

	# Optional flags supported by the compiler
	# -Wno-missing-field-initializers
	NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
	# -Wno-variadic-macros
	NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
	# -Wcovered-switch-default
	COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@

	# Was polly found in tools/polly?
	LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
	# Flags supported by the linker.
	# bfd ld / gold --version-script=file
	HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@

	# Flags to control building support for Intel JIT Events API
	USE_INTEL_JITEVENTS := @USE_INTEL_JITEVENTS@
	INTEL_JITEVENTS_INCDIR := @INTEL_JITEVENTS_INCDIR@
	INTEL_JITEVENTS_LIBDIR := @INTEL_JITEVENTS_LIBDIR@

	# Flags to control building support for OProfile JIT API
	USE_OPROFILE := @USE_OPROFILE@