| //===-- TargetLowering.cpp - Implement the TargetLowering class -----------===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file was developed by the LLVM research group and is distributed under |
| // the University of Illinois Open Source License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This implements the TargetLowering class. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/Target/TargetLowering.h" |
| #include "llvm/Target/TargetData.h" |
| #include "llvm/Target/TargetMachine.h" |
| #include "llvm/Target/MRegisterInfo.h" |
| #include "llvm/DerivedTypes.h" |
| #include "llvm/CodeGen/SelectionDAG.h" |
| #include "llvm/ADT/StringExtras.h" |
| #include "llvm/Support/MathExtras.h" |
| using namespace llvm; |
| |
| /// InitLibcallNames - Set default libcall names. |
| /// |
| static void InitLibcallNames(const char **Names) { |
| Names[RTLIB::SHL_I32] = "__ashlsi3"; |
| Names[RTLIB::SHL_I64] = "__ashldi3"; |
| Names[RTLIB::SRL_I32] = "__lshrsi3"; |
| Names[RTLIB::SRL_I64] = "__lshrdi3"; |
| Names[RTLIB::SRA_I32] = "__ashrsi3"; |
| Names[RTLIB::SRA_I64] = "__ashrdi3"; |
| Names[RTLIB::MUL_I32] = "__mulsi3"; |
| Names[RTLIB::MUL_I64] = "__muldi3"; |
| Names[RTLIB::SDIV_I32] = "__divsi3"; |
| Names[RTLIB::SDIV_I64] = "__divdi3"; |
| Names[RTLIB::UDIV_I32] = "__udivsi3"; |
| Names[RTLIB::UDIV_I64] = "__udivdi3"; |
| Names[RTLIB::SREM_I32] = "__modsi3"; |
| Names[RTLIB::SREM_I64] = "__moddi3"; |
| Names[RTLIB::UREM_I32] = "__umodsi3"; |
| Names[RTLIB::UREM_I64] = "__umoddi3"; |
| Names[RTLIB::NEG_I32] = "__negsi2"; |
| Names[RTLIB::NEG_I64] = "__negdi2"; |
| Names[RTLIB::ADD_F32] = "__addsf3"; |
| Names[RTLIB::ADD_F64] = "__adddf3"; |
| Names[RTLIB::SUB_F32] = "__subsf3"; |
| Names[RTLIB::SUB_F64] = "__subdf3"; |
| Names[RTLIB::MUL_F32] = "__mulsf3"; |
| Names[RTLIB::MUL_F64] = "__muldf3"; |
| Names[RTLIB::DIV_F32] = "__divsf3"; |
| Names[RTLIB::DIV_F64] = "__divdf3"; |
| Names[RTLIB::REM_F32] = "fmodf"; |
| Names[RTLIB::REM_F64] = "fmod"; |
| Names[RTLIB::NEG_F32] = "__negsf2"; |
| Names[RTLIB::NEG_F64] = "__negdf2"; |
| Names[RTLIB::POWI_F32] = "__powisf2"; |
| Names[RTLIB::POWI_F64] = "__powidf2"; |
| Names[RTLIB::SQRT_F32] = "sqrtf"; |
| Names[RTLIB::SQRT_F64] = "sqrt"; |
| Names[RTLIB::SIN_F32] = "sinf"; |
| Names[RTLIB::SIN_F64] = "sin"; |
| Names[RTLIB::COS_F32] = "cosf"; |
| Names[RTLIB::COS_F64] = "cos"; |
| Names[RTLIB::FPEXT_F32_F64] = "__extendsfdf2"; |
| Names[RTLIB::FPROUND_F64_F32] = "__truncdfsf2"; |
| Names[RTLIB::FPTOSINT_F32_I32] = "__fixsfsi"; |
| Names[RTLIB::FPTOSINT_F32_I64] = "__fixsfdi"; |
| Names[RTLIB::FPTOSINT_F64_I32] = "__fixdfsi"; |
| Names[RTLIB::FPTOSINT_F64_I64] = "__fixdfdi"; |
| Names[RTLIB::FPTOUINT_F32_I32] = "__fixunssfsi"; |
| Names[RTLIB::FPTOUINT_F32_I64] = "__fixunssfdi"; |
| Names[RTLIB::FPTOUINT_F64_I32] = "__fixunsdfsi"; |
| Names[RTLIB::FPTOUINT_F64_I64] = "__fixunsdfdi"; |
| Names[RTLIB::SINTTOFP_I32_F32] = "__floatsisf"; |
| Names[RTLIB::SINTTOFP_I32_F64] = "__floatsidf"; |
| Names[RTLIB::SINTTOFP_I64_F32] = "__floatdisf"; |
| Names[RTLIB::SINTTOFP_I64_F64] = "__floatdidf"; |
| Names[RTLIB::UINTTOFP_I32_F32] = "__floatunsisf"; |
| Names[RTLIB::UINTTOFP_I32_F64] = "__floatunsidf"; |
| Names[RTLIB::UINTTOFP_I64_F32] = "__floatundisf"; |
| Names[RTLIB::UINTTOFP_I64_F64] = "__floatundidf"; |
| Names[RTLIB::OEQ_F32] = "__eqsf2"; |
| Names[RTLIB::OEQ_F64] = "__eqdf2"; |
| Names[RTLIB::UNE_F32] = "__nesf2"; |
| Names[RTLIB::UNE_F64] = "__nedf2"; |
| Names[RTLIB::OGE_F32] = "__gesf2"; |
| Names[RTLIB::OGE_F64] = "__gedf2"; |
| Names[RTLIB::OLT_F32] = "__ltsf2"; |
| Names[RTLIB::OLT_F64] = "__ltdf2"; |
| Names[RTLIB::OLE_F32] = "__lesf2"; |
| Names[RTLIB::OLE_F64] = "__ledf2"; |
| Names[RTLIB::OGT_F32] = "__gtsf2"; |
| Names[RTLIB::OGT_F64] = "__gtdf2"; |
| Names[RTLIB::UO_F32] = "__unordsf2"; |
| Names[RTLIB::UO_F64] = "__unorddf2"; |
| Names[RTLIB::O_F32] = "__unordsf2"; |
| Names[RTLIB::O_F64] = "__unorddf2"; |
| } |
| |
| /// InitCmpLibcallCCs - Set default comparison libcall CC. |
| /// |
| static void InitCmpLibcallCCs(ISD::CondCode *CCs) { |
| memset(CCs, ISD::SETCC_INVALID, sizeof(ISD::CondCode)*RTLIB::UNKNOWN_LIBCALL); |
| CCs[RTLIB::OEQ_F32] = ISD::SETEQ; |
| CCs[RTLIB::OEQ_F64] = ISD::SETEQ; |
| CCs[RTLIB::UNE_F32] = ISD::SETNE; |
| CCs[RTLIB::UNE_F64] = ISD::SETNE; |
| CCs[RTLIB::OGE_F32] = ISD::SETGE; |
| CCs[RTLIB::OGE_F64] = ISD::SETGE; |
| CCs[RTLIB::OLT_F32] = ISD::SETLT; |
| CCs[RTLIB::OLT_F64] = ISD::SETLT; |
| CCs[RTLIB::OLE_F32] = ISD::SETLE; |
| CCs[RTLIB::OLE_F64] = ISD::SETLE; |
| CCs[RTLIB::OGT_F32] = ISD::SETGT; |
| CCs[RTLIB::OGT_F64] = ISD::SETGT; |
| CCs[RTLIB::UO_F32] = ISD::SETNE; |
| CCs[RTLIB::UO_F64] = ISD::SETNE; |
| CCs[RTLIB::O_F32] = ISD::SETEQ; |
| CCs[RTLIB::O_F64] = ISD::SETEQ; |
| } |
| |
| TargetLowering::TargetLowering(TargetMachine &tm) |
| : TM(tm), TD(TM.getTargetData()) { |
| assert(ISD::BUILTIN_OP_END <= 156 && |
| "Fixed size array in TargetLowering is not large enough!"); |
| // All operations default to being supported. |
| memset(OpActions, 0, sizeof(OpActions)); |
| memset(LoadXActions, 0, sizeof(LoadXActions)); |
| memset(&StoreXActions, 0, sizeof(StoreXActions)); |
| // Initialize all indexed load / store to expand. |
| for (unsigned VT = 0; VT != (unsigned)MVT::LAST_VALUETYPE; ++VT) { |
| for (unsigned IM = (unsigned)ISD::PRE_INC; |
| IM != (unsigned)ISD::LAST_INDEXED_MODE; ++IM) { |
| setIndexedLoadAction(IM, (MVT::ValueType)VT, Expand); |
| setIndexedStoreAction(IM, (MVT::ValueType)VT, Expand); |
| } |
| } |
| |
| IsLittleEndian = TD->isLittleEndian(); |
| UsesGlobalOffsetTable = false; |
| ShiftAmountTy = SetCCResultTy = PointerTy = getValueType(TD->getIntPtrType()); |
| ShiftAmtHandling = Undefined; |
| memset(RegClassForVT, 0,MVT::LAST_VALUETYPE*sizeof(TargetRegisterClass*)); |
| memset(TargetDAGCombineArray, 0, |
| sizeof(TargetDAGCombineArray)/sizeof(TargetDAGCombineArray[0])); |
| maxStoresPerMemset = maxStoresPerMemcpy = maxStoresPerMemmove = 8; |
| allowUnalignedMemoryAccesses = false; |
| UseUnderscoreSetJmp = false; |
| UseUnderscoreLongJmp = false; |
| SelectIsExpensive = false; |
| IntDivIsCheap = false; |
| Pow2DivIsCheap = false; |
| StackPointerRegisterToSaveRestore = 0; |
| ExceptionPointerRegister = 0; |
| ExceptionSelectorRegister = 0; |
| SchedPreferenceInfo = SchedulingForLatency; |
| JumpBufSize = 0; |
| JumpBufAlignment = 0; |
| |
| InitLibcallNames(LibcallRoutineNames); |
| InitCmpLibcallCCs(CmpLibcallCCs); |
| } |
| |
| TargetLowering::~TargetLowering() {} |
| |
| /// setValueTypeAction - Set the action for a particular value type. This |
| /// assumes an action has not already been set for this value type. |
| static void SetValueTypeAction(MVT::ValueType VT, |
| TargetLowering::LegalizeAction Action, |
| TargetLowering &TLI, |
| MVT::ValueType *TransformToType, |
| TargetLowering::ValueTypeActionImpl &ValueTypeActions) { |
| ValueTypeActions.setTypeAction(VT, Action); |
| if (Action == TargetLowering::Promote) { |
| MVT::ValueType PromoteTo; |
| if (VT == MVT::f32) |
| PromoteTo = MVT::f64; |
| else { |
| unsigned LargerReg = VT+1; |
| while (!TLI.isTypeLegal((MVT::ValueType)LargerReg)) { |
| ++LargerReg; |
| assert(MVT::isInteger((MVT::ValueType)LargerReg) && |
| "Nothing to promote to??"); |
| } |
| PromoteTo = (MVT::ValueType)LargerReg; |
| } |
| |
| assert(MVT::isInteger(VT) == MVT::isInteger(PromoteTo) && |
| MVT::isFloatingPoint(VT) == MVT::isFloatingPoint(PromoteTo) && |
| "Can only promote from int->int or fp->fp!"); |
| assert(VT < PromoteTo && "Must promote to a larger type!"); |
| TransformToType[VT] = PromoteTo; |
| } else if (Action == TargetLowering::Expand) { |
| // f32 and f64 is each expanded to corresponding integer type of same size. |
| if (VT == MVT::f32) |
| TransformToType[VT] = MVT::i32; |
| else if (VT == MVT::f64) |
| TransformToType[VT] = MVT::i64; |
| else { |
| assert((VT == MVT::Vector || MVT::isInteger(VT)) && VT > MVT::i8 && |
| "Cannot expand this type: target must support SOME integer reg!"); |
| // Expand to the next smaller integer type! |
| TransformToType[VT] = (MVT::ValueType)(VT-1); |
| } |
| } |
| } |
| |
| |
| /// computeRegisterProperties - Once all of the register classes are added, |
| /// this allows us to compute derived properties we expose. |
| void TargetLowering::computeRegisterProperties() { |
| assert(MVT::LAST_VALUETYPE <= 32 && |
| "Too many value types for ValueTypeActions to hold!"); |
| |
| // Everything defaults to one. |
| for (unsigned i = 0; i != MVT::LAST_VALUETYPE; ++i) |
| NumElementsForVT[i] = 1; |
| |
| // Find the largest integer register class. |
| unsigned LargestIntReg = MVT::i128; |
| for (; RegClassForVT[LargestIntReg] == 0; --LargestIntReg) |
| assert(LargestIntReg != MVT::i1 && "No integer registers defined!"); |
| |
| // Every integer value type larger than this largest register takes twice as |
| // many registers to represent as the previous ValueType. |
| unsigned ExpandedReg = LargestIntReg; ++LargestIntReg; |
| for (++ExpandedReg; MVT::isInteger((MVT::ValueType)ExpandedReg);++ExpandedReg) |
| NumElementsForVT[ExpandedReg] = 2*NumElementsForVT[ExpandedReg-1]; |
| |
| // Inspect all of the ValueType's possible, deciding how to process them. |
| for (unsigned IntReg = MVT::i1; IntReg <= MVT::i128; ++IntReg) |
| // If we are expanding this type, expand it! |
| if (getNumElements((MVT::ValueType)IntReg) != 1) |
| SetValueTypeAction((MVT::ValueType)IntReg, Expand, *this, TransformToType, |
| ValueTypeActions); |
| else if (!isTypeLegal((MVT::ValueType)IntReg)) |
| // Otherwise, if we don't have native support, we must promote to a |
| // larger type. |
| SetValueTypeAction((MVT::ValueType)IntReg, Promote, *this, |
| TransformToType, ValueTypeActions); |
| else |
| TransformToType[(MVT::ValueType)IntReg] = (MVT::ValueType)IntReg; |
| |
| // If the target does not have native F64 support, expand it to I64. We will |
| // be generating soft float library calls. If the target does not have native |
| // support for F32, promote it to F64 if it is legal. Otherwise, expand it to |
| // I32. |
| if (isTypeLegal(MVT::f64)) |
| TransformToType[MVT::f64] = MVT::f64; |
| else { |
| NumElementsForVT[MVT::f64] = NumElementsForVT[MVT::i64]; |
| SetValueTypeAction(MVT::f64, Expand, *this, TransformToType, |
| ValueTypeActions); |
| } |
| if (isTypeLegal(MVT::f32)) |
| TransformToType[MVT::f32] = MVT::f32; |
| else if (isTypeLegal(MVT::f64)) |
| SetValueTypeAction(MVT::f32, Promote, *this, TransformToType, |
| ValueTypeActions); |
| else { |
| NumElementsForVT[MVT::f32] = NumElementsForVT[MVT::i32]; |
| SetValueTypeAction(MVT::f32, Expand, *this, TransformToType, |
| ValueTypeActions); |
| } |
| |
| // Set MVT::Vector to always be Expanded |
| SetValueTypeAction(MVT::Vector, Expand, *this, TransformToType, |
| ValueTypeActions); |
| |
| // Loop over all of the legal vector value types, specifying an identity type |
| // transformation. |
| for (unsigned i = MVT::FIRST_VECTOR_VALUETYPE; |
| i <= MVT::LAST_VECTOR_VALUETYPE; ++i) { |
| if (isTypeLegal((MVT::ValueType)i)) |
| TransformToType[i] = (MVT::ValueType)i; |
| } |
| } |
| |
| const char *TargetLowering::getTargetNodeName(unsigned Opcode) const { |
| return NULL; |
| } |
| |
| /// getVectorTypeBreakdown - Packed types are broken down into some number of |
| /// legal first class types. For example, <8 x float> maps to 2 MVT::v4f32 |
| /// with Altivec or SSE1, or 8 promoted MVT::f64 values with the X86 FP stack. |
| /// |
| /// This method returns the number and type of the resultant breakdown. |
| /// |
| unsigned TargetLowering::getVectorTypeBreakdown(const VectorType *PTy, |
| MVT::ValueType &PTyElementVT, |
| MVT::ValueType &PTyLegalElementVT) const { |
| // Figure out the right, legal destination reg to copy into. |
| unsigned NumElts = PTy->getNumElements(); |
| MVT::ValueType EltTy = getValueType(PTy->getElementType()); |
| |
| unsigned NumVectorRegs = 1; |
| |
| // Divide the input until we get to a supported size. This will always |
| // end with a scalar if the target doesn't support vectors. |
| while (NumElts > 1 && !isTypeLegal(getVectorType(EltTy, NumElts))) { |
| NumElts >>= 1; |
| NumVectorRegs <<= 1; |
| } |
| |
| MVT::ValueType VT; |
| if (NumElts == 1) { |
| VT = EltTy; |
| } else { |
| VT = getVectorType(EltTy, NumElts); |
| } |
| PTyElementVT = VT; |
| |
| MVT::ValueType DestVT = getTypeToTransformTo(VT); |
| PTyLegalElementVT = DestVT; |
| if (DestVT < VT) { |
| // Value is expanded, e.g. i64 -> i16. |
| return NumVectorRegs*(MVT::getSizeInBits(VT)/MVT::getSizeInBits(DestVT)); |
| } else { |
| // Otherwise, promotion or legal types use the same number of registers as |
| // the vector decimated to the appropriate level. |
| return NumVectorRegs; |
| } |
| |
| return 1; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Optimization Methods |
| //===----------------------------------------------------------------------===// |
| |
| /// ShrinkDemandedConstant - Check to see if the specified operand of the |
| /// specified instruction is a constant integer. If so, check to see if there |
| /// are any bits set in the constant that are not demanded. If so, shrink the |
| /// constant and return true. |
| bool TargetLowering::TargetLoweringOpt::ShrinkDemandedConstant(SDOperand Op, |
| uint64_t Demanded) { |
| // FIXME: ISD::SELECT, ISD::SELECT_CC |
| switch(Op.getOpcode()) { |
| default: break; |
| case ISD::AND: |
| case ISD::OR: |
| case ISD::XOR: |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) |
| if ((~Demanded & C->getValue()) != 0) { |
| MVT::ValueType VT = Op.getValueType(); |
| SDOperand New = DAG.getNode(Op.getOpcode(), VT, Op.getOperand(0), |
| DAG.getConstant(Demanded & C->getValue(), |
| VT)); |
| return CombineTo(Op, New); |
| } |
| break; |
| } |
| return false; |
| } |
| |
| /// SimplifyDemandedBits - Look at Op. At this point, we know that only the |
| /// DemandedMask bits of the result of Op are ever used downstream. If we can |
| /// use this information to simplify Op, create a new simplified DAG node and |
| /// return true, returning the original and new nodes in Old and New. Otherwise, |
| /// analyze the expression and return a mask of KnownOne and KnownZero bits for |
| /// the expression (used to simplify the caller). The KnownZero/One bits may |
| /// only be accurate for those bits in the DemandedMask. |
| bool TargetLowering::SimplifyDemandedBits(SDOperand Op, uint64_t DemandedMask, |
| uint64_t &KnownZero, |
| uint64_t &KnownOne, |
| TargetLoweringOpt &TLO, |
| unsigned Depth) const { |
| KnownZero = KnownOne = 0; // Don't know anything. |
| // Other users may use these bits. |
| if (!Op.Val->hasOneUse()) { |
| if (Depth != 0) { |
| // If not at the root, Just compute the KnownZero/KnownOne bits to |
| // simplify things downstream. |
| ComputeMaskedBits(Op, DemandedMask, KnownZero, KnownOne, Depth); |
| return false; |
| } |
| // If this is the root being simplified, allow it to have multiple uses, |
| // just set the DemandedMask to all bits. |
| DemandedMask = MVT::getIntVTBitMask(Op.getValueType()); |
| } else if (DemandedMask == 0) { |
| // Not demanding any bits from Op. |
| if (Op.getOpcode() != ISD::UNDEF) |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::UNDEF, Op.getValueType())); |
| return false; |
| } else if (Depth == 6) { // Limit search depth. |
| return false; |
| } |
| |
| uint64_t KnownZero2, KnownOne2, KnownZeroOut, KnownOneOut; |
| switch (Op.getOpcode()) { |
| case ISD::Constant: |
| // We know all of the bits for a constant! |
| KnownOne = cast<ConstantSDNode>(Op)->getValue() & DemandedMask; |
| KnownZero = ~KnownOne & DemandedMask; |
| return false; // Don't fall through, will infinitely loop. |
| case ISD::AND: |
| // If the RHS is a constant, check to see if the LHS would be zero without |
| // using the bits from the RHS. Below, we use knowledge about the RHS to |
| // simplify the LHS, here we're using information from the LHS to simplify |
| // the RHS. |
| if (ConstantSDNode *RHSC = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| uint64_t LHSZero, LHSOne; |
| ComputeMaskedBits(Op.getOperand(0), DemandedMask, |
| LHSZero, LHSOne, Depth+1); |
| // If the LHS already has zeros where RHSC does, this and is dead. |
| if ((LHSZero & DemandedMask) == (~RHSC->getValue() & DemandedMask)) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| // If any of the set bits in the RHS are known zero on the LHS, shrink |
| // the constant. |
| if (TLO.ShrinkDemandedConstant(Op, ~LHSZero & DemandedMask)) |
| return true; |
| } |
| |
| if (SimplifyDemandedBits(Op.getOperand(1), DemandedMask, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask & ~KnownZero, |
| KnownZero2, KnownOne2, TLO, Depth+1)) |
| return true; |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // If all of the demanded bits are known one on one side, return the other. |
| // These bits cannot contribute to the result of the 'and'. |
| if ((DemandedMask & ~KnownZero2 & KnownOne)==(DemandedMask & ~KnownZero2)) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| if ((DemandedMask & ~KnownZero & KnownOne2)==(DemandedMask & ~KnownZero)) |
| return TLO.CombineTo(Op, Op.getOperand(1)); |
| // If all of the demanded bits in the inputs are known zeros, return zero. |
| if ((DemandedMask & (KnownZero|KnownZero2)) == DemandedMask) |
| return TLO.CombineTo(Op, TLO.DAG.getConstant(0, Op.getValueType())); |
| // If the RHS is a constant, see if we can simplify it. |
| if (TLO.ShrinkDemandedConstant(Op, DemandedMask & ~KnownZero2)) |
| return true; |
| |
| // Output known-1 bits are only known if set in both the LHS & RHS. |
| KnownOne &= KnownOne2; |
| // Output known-0 are known to be clear if zero in either the LHS | RHS. |
| KnownZero |= KnownZero2; |
| break; |
| case ISD::OR: |
| if (SimplifyDemandedBits(Op.getOperand(1), DemandedMask, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask & ~KnownOne, |
| KnownZero2, KnownOne2, TLO, Depth+1)) |
| return true; |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // If all of the demanded bits are known zero on one side, return the other. |
| // These bits cannot contribute to the result of the 'or'. |
| if ((DemandedMask & ~KnownOne2 & KnownZero) == (DemandedMask & ~KnownOne2)) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| if ((DemandedMask & ~KnownOne & KnownZero2) == (DemandedMask & ~KnownOne)) |
| return TLO.CombineTo(Op, Op.getOperand(1)); |
| // If all of the potentially set bits on one side are known to be set on |
| // the other side, just use the 'other' side. |
| if ((DemandedMask & (~KnownZero) & KnownOne2) == |
| (DemandedMask & (~KnownZero))) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| if ((DemandedMask & (~KnownZero2) & KnownOne) == |
| (DemandedMask & (~KnownZero2))) |
| return TLO.CombineTo(Op, Op.getOperand(1)); |
| // If the RHS is a constant, see if we can simplify it. |
| if (TLO.ShrinkDemandedConstant(Op, DemandedMask)) |
| return true; |
| |
| // Output known-0 bits are only known if clear in both the LHS & RHS. |
| KnownZero &= KnownZero2; |
| // Output known-1 are known to be set if set in either the LHS | RHS. |
| KnownOne |= KnownOne2; |
| break; |
| case ISD::XOR: |
| if (SimplifyDemandedBits(Op.getOperand(1), DemandedMask, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask, KnownZero2, |
| KnownOne2, TLO, Depth+1)) |
| return true; |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // If all of the demanded bits are known zero on one side, return the other. |
| // These bits cannot contribute to the result of the 'xor'. |
| if ((DemandedMask & KnownZero) == DemandedMask) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| if ((DemandedMask & KnownZero2) == DemandedMask) |
| return TLO.CombineTo(Op, Op.getOperand(1)); |
| |
| // If all of the unknown bits are known to be zero on one side or the other |
| // (but not both) turn this into an *inclusive* or. |
| // e.g. (A & C1)^(B & C2) -> (A & C1)|(B & C2) iff C1&C2 == 0 |
| if ((DemandedMask & ~KnownZero & ~KnownZero2) == 0) |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::OR, Op.getValueType(), |
| Op.getOperand(0), |
| Op.getOperand(1))); |
| |
| // Output known-0 bits are known if clear or set in both the LHS & RHS. |
| KnownZeroOut = (KnownZero & KnownZero2) | (KnownOne & KnownOne2); |
| // Output known-1 are known to be set if set in only one of the LHS, RHS. |
| KnownOneOut = (KnownZero & KnownOne2) | (KnownOne & KnownZero2); |
| |
| // If all of the demanded bits on one side are known, and all of the set |
| // bits on that side are also known to be set on the other side, turn this |
| // into an AND, as we know the bits will be cleared. |
| // e.g. (X | C1) ^ C2 --> (X | C1) & ~C2 iff (C1&C2) == C2 |
| if ((DemandedMask & (KnownZero|KnownOne)) == DemandedMask) { // all known |
| if ((KnownOne & KnownOne2) == KnownOne) { |
| MVT::ValueType VT = Op.getValueType(); |
| SDOperand ANDC = TLO.DAG.getConstant(~KnownOne & DemandedMask, VT); |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::AND, VT, Op.getOperand(0), |
| ANDC)); |
| } |
| } |
| |
| // If the RHS is a constant, see if we can simplify it. |
| // FIXME: for XOR, we prefer to force bits to 1 if they will make a -1. |
| if (TLO.ShrinkDemandedConstant(Op, DemandedMask)) |
| return true; |
| |
| KnownZero = KnownZeroOut; |
| KnownOne = KnownOneOut; |
| break; |
| case ISD::SETCC: |
| // If we know the result of a setcc has the top bits zero, use this info. |
| if (getSetCCResultContents() == TargetLowering::ZeroOrOneSetCCResult) |
| KnownZero |= (MVT::getIntVTBitMask(Op.getValueType()) ^ 1ULL); |
| break; |
| case ISD::SELECT: |
| if (SimplifyDemandedBits(Op.getOperand(2), DemandedMask, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| if (SimplifyDemandedBits(Op.getOperand(1), DemandedMask, KnownZero2, |
| KnownOne2, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // If the operands are constants, see if we can simplify them. |
| if (TLO.ShrinkDemandedConstant(Op, DemandedMask)) |
| return true; |
| |
| // Only known if known in both the LHS and RHS. |
| KnownOne &= KnownOne2; |
| KnownZero &= KnownZero2; |
| break; |
| case ISD::SELECT_CC: |
| if (SimplifyDemandedBits(Op.getOperand(3), DemandedMask, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| if (SimplifyDemandedBits(Op.getOperand(2), DemandedMask, KnownZero2, |
| KnownOne2, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // If the operands are constants, see if we can simplify them. |
| if (TLO.ShrinkDemandedConstant(Op, DemandedMask)) |
| return true; |
| |
| // Only known if known in both the LHS and RHS. |
| KnownOne &= KnownOne2; |
| KnownZero &= KnownZero2; |
| break; |
| case ISD::SHL: |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask >> SA->getValue(), |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| KnownZero <<= SA->getValue(); |
| KnownOne <<= SA->getValue(); |
| KnownZero |= (1ULL << SA->getValue())-1; // low bits known zero. |
| } |
| break; |
| case ISD::SRL: |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned ShAmt = SA->getValue(); |
| |
| // Compute the new bits that are at the top now. |
| uint64_t TypeMask = MVT::getIntVTBitMask(VT); |
| if (SimplifyDemandedBits(Op.getOperand(0), |
| (DemandedMask << ShAmt) & TypeMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero &= TypeMask; |
| KnownOne &= TypeMask; |
| KnownZero >>= ShAmt; |
| KnownOne >>= ShAmt; |
| |
| uint64_t HighBits = (1ULL << ShAmt)-1; |
| HighBits <<= MVT::getSizeInBits(VT) - ShAmt; |
| KnownZero |= HighBits; // High bits known zero. |
| } |
| break; |
| case ISD::SRA: |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned ShAmt = SA->getValue(); |
| |
| // Compute the new bits that are at the top now. |
| uint64_t TypeMask = MVT::getIntVTBitMask(VT); |
| |
| uint64_t InDemandedMask = (DemandedMask << ShAmt) & TypeMask; |
| |
| // If any of the demanded bits are produced by the sign extension, we also |
| // demand the input sign bit. |
| uint64_t HighBits = (1ULL << ShAmt)-1; |
| HighBits <<= MVT::getSizeInBits(VT) - ShAmt; |
| if (HighBits & DemandedMask) |
| InDemandedMask |= MVT::getIntVTSignBit(VT); |
| |
| if (SimplifyDemandedBits(Op.getOperand(0), InDemandedMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero &= TypeMask; |
| KnownOne &= TypeMask; |
| KnownZero >>= ShAmt; |
| KnownOne >>= ShAmt; |
| |
| // Handle the sign bits. |
| uint64_t SignBit = MVT::getIntVTSignBit(VT); |
| SignBit >>= ShAmt; // Adjust to where it is now in the mask. |
| |
| // If the input sign bit is known to be zero, or if none of the top bits |
| // are demanded, turn this into an unsigned shift right. |
| if ((KnownZero & SignBit) || (HighBits & ~DemandedMask) == HighBits) { |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::SRL, VT, Op.getOperand(0), |
| Op.getOperand(1))); |
| } else if (KnownOne & SignBit) { // New bits are known one. |
| KnownOne |= HighBits; |
| } |
| } |
| break; |
| case ISD::SIGN_EXTEND_INREG: { |
| MVT::ValueType EVT = cast<VTSDNode>(Op.getOperand(1))->getVT(); |
| |
| // Sign extension. Compute the demanded bits in the result that are not |
| // present in the input. |
| uint64_t NewBits = ~MVT::getIntVTBitMask(EVT) & DemandedMask; |
| |
| // If none of the extended bits are demanded, eliminate the sextinreg. |
| if (NewBits == 0) |
| return TLO.CombineTo(Op, Op.getOperand(0)); |
| |
| uint64_t InSignBit = MVT::getIntVTSignBit(EVT); |
| int64_t InputDemandedBits = DemandedMask & MVT::getIntVTBitMask(EVT); |
| |
| // Since the sign extended bits are demanded, we know that the sign |
| // bit is demanded. |
| InputDemandedBits |= InSignBit; |
| |
| if (SimplifyDemandedBits(Op.getOperand(0), InputDemandedBits, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| |
| // If the sign bit of the input is known set or clear, then we know the |
| // top bits of the result. |
| |
| // If the input sign bit is known zero, convert this into a zero extension. |
| if (KnownZero & InSignBit) |
| return TLO.CombineTo(Op, |
| TLO.DAG.getZeroExtendInReg(Op.getOperand(0), EVT)); |
| |
| if (KnownOne & InSignBit) { // Input sign bit known set |
| KnownOne |= NewBits; |
| KnownZero &= ~NewBits; |
| } else { // Input sign bit unknown |
| KnownZero &= ~NewBits; |
| KnownOne &= ~NewBits; |
| } |
| break; |
| } |
| case ISD::CTTZ: |
| case ISD::CTLZ: |
| case ISD::CTPOP: { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned LowBits = Log2_32(MVT::getSizeInBits(VT))+1; |
| KnownZero = ~((1ULL << LowBits)-1) & MVT::getIntVTBitMask(VT); |
| KnownOne = 0; |
| break; |
| } |
| case ISD::LOAD: { |
| if (ISD::isZEXTLoad(Op.Val)) { |
| LoadSDNode *LD = cast<LoadSDNode>(Op); |
| MVT::ValueType VT = LD->getLoadedVT(); |
| KnownZero |= ~MVT::getIntVTBitMask(VT) & DemandedMask; |
| } |
| break; |
| } |
| case ISD::ZERO_EXTEND: { |
| uint64_t InMask = MVT::getIntVTBitMask(Op.getOperand(0).getValueType()); |
| |
| // If none of the top bits are demanded, convert this into an any_extend. |
| uint64_t NewBits = (~InMask) & DemandedMask; |
| if (NewBits == 0) |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::ANY_EXTEND, |
| Op.getValueType(), |
| Op.getOperand(0))); |
| |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask & InMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero |= NewBits; |
| break; |
| } |
| case ISD::SIGN_EXTEND: { |
| MVT::ValueType InVT = Op.getOperand(0).getValueType(); |
| uint64_t InMask = MVT::getIntVTBitMask(InVT); |
| uint64_t InSignBit = MVT::getIntVTSignBit(InVT); |
| uint64_t NewBits = (~InMask) & DemandedMask; |
| |
| // If none of the top bits are demanded, convert this into an any_extend. |
| if (NewBits == 0) |
| return TLO.CombineTo(Op,TLO.DAG.getNode(ISD::ANY_EXTEND,Op.getValueType(), |
| Op.getOperand(0))); |
| |
| // Since some of the sign extended bits are demanded, we know that the sign |
| // bit is demanded. |
| uint64_t InDemandedBits = DemandedMask & InMask; |
| InDemandedBits |= InSignBit; |
| |
| if (SimplifyDemandedBits(Op.getOperand(0), InDemandedBits, KnownZero, |
| KnownOne, TLO, Depth+1)) |
| return true; |
| |
| // If the sign bit is known zero, convert this to a zero extend. |
| if (KnownZero & InSignBit) |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::ZERO_EXTEND, |
| Op.getValueType(), |
| Op.getOperand(0))); |
| |
| // If the sign bit is known one, the top bits match. |
| if (KnownOne & InSignBit) { |
| KnownOne |= NewBits; |
| KnownZero &= ~NewBits; |
| } else { // Otherwise, top bits aren't known. |
| KnownOne &= ~NewBits; |
| KnownZero &= ~NewBits; |
| } |
| break; |
| } |
| case ISD::ANY_EXTEND: { |
| uint64_t InMask = MVT::getIntVTBitMask(Op.getOperand(0).getValueType()); |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask & InMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| break; |
| } |
| case ISD::TRUNCATE: { |
| // Simplify the input, using demanded bit information, and compute the known |
| // zero/one bits live out. |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| |
| // If the input is only used by this truncate, see if we can shrink it based |
| // on the known demanded bits. |
| if (Op.getOperand(0).Val->hasOneUse()) { |
| SDOperand In = Op.getOperand(0); |
| switch (In.getOpcode()) { |
| default: break; |
| case ISD::SRL: |
| // Shrink SRL by a constant if none of the high bits shifted in are |
| // demanded. |
| if (ConstantSDNode *ShAmt = dyn_cast<ConstantSDNode>(In.getOperand(1))){ |
| uint64_t HighBits = MVT::getIntVTBitMask(In.getValueType()); |
| HighBits &= ~MVT::getIntVTBitMask(Op.getValueType()); |
| HighBits >>= ShAmt->getValue(); |
| |
| if (ShAmt->getValue() < MVT::getSizeInBits(Op.getValueType()) && |
| (DemandedMask & HighBits) == 0) { |
| // None of the shifted in bits are needed. Add a truncate of the |
| // shift input, then shift it. |
| SDOperand NewTrunc = TLO.DAG.getNode(ISD::TRUNCATE, |
| Op.getValueType(), |
| In.getOperand(0)); |
| return TLO.CombineTo(Op, TLO.DAG.getNode(ISD::SRL,Op.getValueType(), |
| NewTrunc, In.getOperand(1))); |
| } |
| } |
| break; |
| } |
| } |
| |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| uint64_t OutMask = MVT::getIntVTBitMask(Op.getValueType()); |
| KnownZero &= OutMask; |
| KnownOne &= OutMask; |
| break; |
| } |
| case ISD::AssertZext: { |
| MVT::ValueType VT = cast<VTSDNode>(Op.getOperand(1))->getVT(); |
| uint64_t InMask = MVT::getIntVTBitMask(VT); |
| if (SimplifyDemandedBits(Op.getOperand(0), DemandedMask & InMask, |
| KnownZero, KnownOne, TLO, Depth+1)) |
| return true; |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero |= ~InMask & DemandedMask; |
| break; |
| } |
| case ISD::ADD: |
| case ISD::SUB: |
| case ISD::INTRINSIC_WO_CHAIN: |
| case ISD::INTRINSIC_W_CHAIN: |
| case ISD::INTRINSIC_VOID: |
| // Just use ComputeMaskedBits to compute output bits. |
| ComputeMaskedBits(Op, DemandedMask, KnownZero, KnownOne, Depth); |
| break; |
| } |
| |
| // If we know the value of all of the demanded bits, return this as a |
| // constant. |
| if ((DemandedMask & (KnownZero|KnownOne)) == DemandedMask) |
| return TLO.CombineTo(Op, TLO.DAG.getConstant(KnownOne, Op.getValueType())); |
| |
| return false; |
| } |
| |
| /// MaskedValueIsZero - Return true if 'V & Mask' is known to be zero. We use |
| /// this predicate to simplify operations downstream. Mask is known to be zero |
| /// for bits that V cannot have. |
| bool TargetLowering::MaskedValueIsZero(SDOperand Op, uint64_t Mask, |
| unsigned Depth) const { |
| uint64_t KnownZero, KnownOne; |
| ComputeMaskedBits(Op, Mask, KnownZero, KnownOne, Depth); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| return (KnownZero & Mask) == Mask; |
| } |
| |
| /// ComputeMaskedBits - Determine which of the bits specified in Mask are |
| /// known to be either zero or one and return them in the KnownZero/KnownOne |
| /// bitsets. This code only analyzes bits in Mask, in order to short-circuit |
| /// processing. |
| void TargetLowering::ComputeMaskedBits(SDOperand Op, uint64_t Mask, |
| uint64_t &KnownZero, uint64_t &KnownOne, |
| unsigned Depth) const { |
| KnownZero = KnownOne = 0; // Don't know anything. |
| if (Depth == 6 || Mask == 0) |
| return; // Limit search depth. |
| |
| uint64_t KnownZero2, KnownOne2; |
| |
| switch (Op.getOpcode()) { |
| case ISD::Constant: |
| // We know all of the bits for a constant! |
| KnownOne = cast<ConstantSDNode>(Op)->getValue() & Mask; |
| KnownZero = ~KnownOne & Mask; |
| return; |
| case ISD::AND: |
| // If either the LHS or the RHS are Zero, the result is zero. |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero, KnownOne, Depth+1); |
| Mask &= ~KnownZero; |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Output known-1 bits are only known if set in both the LHS & RHS. |
| KnownOne &= KnownOne2; |
| // Output known-0 are known to be clear if zero in either the LHS | RHS. |
| KnownZero |= KnownZero2; |
| return; |
| case ISD::OR: |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero, KnownOne, Depth+1); |
| Mask &= ~KnownOne; |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Output known-0 bits are only known if clear in both the LHS & RHS. |
| KnownZero &= KnownZero2; |
| // Output known-1 are known to be set if set in either the LHS | RHS. |
| KnownOne |= KnownOne2; |
| return; |
| case ISD::XOR: { |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero, KnownOne, Depth+1); |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Output known-0 bits are known if clear or set in both the LHS & RHS. |
| uint64_t KnownZeroOut = (KnownZero & KnownZero2) | (KnownOne & KnownOne2); |
| // Output known-1 are known to be set if set in only one of the LHS, RHS. |
| KnownOne = (KnownZero & KnownOne2) | (KnownOne & KnownZero2); |
| KnownZero = KnownZeroOut; |
| return; |
| } |
| case ISD::SELECT: |
| ComputeMaskedBits(Op.getOperand(2), Mask, KnownZero, KnownOne, Depth+1); |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Only known if known in both the LHS and RHS. |
| KnownOne &= KnownOne2; |
| KnownZero &= KnownZero2; |
| return; |
| case ISD::SELECT_CC: |
| ComputeMaskedBits(Op.getOperand(3), Mask, KnownZero, KnownOne, Depth+1); |
| ComputeMaskedBits(Op.getOperand(2), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Only known if known in both the LHS and RHS. |
| KnownOne &= KnownOne2; |
| KnownZero &= KnownZero2; |
| return; |
| case ISD::SETCC: |
| // If we know the result of a setcc has the top bits zero, use this info. |
| if (getSetCCResultContents() == TargetLowering::ZeroOrOneSetCCResult) |
| KnownZero |= (MVT::getIntVTBitMask(Op.getValueType()) ^ 1ULL); |
| return; |
| case ISD::SHL: |
| // (shl X, C1) & C2 == 0 iff (X & C2 >>u C1) == 0 |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| ComputeMaskedBits(Op.getOperand(0), Mask >> SA->getValue(), |
| KnownZero, KnownOne, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero <<= SA->getValue(); |
| KnownOne <<= SA->getValue(); |
| KnownZero |= (1ULL << SA->getValue())-1; // low bits known zero. |
| } |
| return; |
| case ISD::SRL: |
| // (ushr X, C1) & C2 == 0 iff (-1 >> C1) & C2 == 0 |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned ShAmt = SA->getValue(); |
| |
| uint64_t TypeMask = MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op.getOperand(0), (Mask << ShAmt) & TypeMask, |
| KnownZero, KnownOne, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero &= TypeMask; |
| KnownOne &= TypeMask; |
| KnownZero >>= ShAmt; |
| KnownOne >>= ShAmt; |
| |
| uint64_t HighBits = (1ULL << ShAmt)-1; |
| HighBits <<= MVT::getSizeInBits(VT)-ShAmt; |
| KnownZero |= HighBits; // High bits known zero. |
| } |
| return; |
| case ISD::SRA: |
| if (ConstantSDNode *SA = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned ShAmt = SA->getValue(); |
| |
| // Compute the new bits that are at the top now. |
| uint64_t TypeMask = MVT::getIntVTBitMask(VT); |
| |
| uint64_t InDemandedMask = (Mask << ShAmt) & TypeMask; |
| // If any of the demanded bits are produced by the sign extension, we also |
| // demand the input sign bit. |
| uint64_t HighBits = (1ULL << ShAmt)-1; |
| HighBits <<= MVT::getSizeInBits(VT) - ShAmt; |
| if (HighBits & Mask) |
| InDemandedMask |= MVT::getIntVTSignBit(VT); |
| |
| ComputeMaskedBits(Op.getOperand(0), InDemandedMask, KnownZero, KnownOne, |
| Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| KnownZero &= TypeMask; |
| KnownOne &= TypeMask; |
| KnownZero >>= ShAmt; |
| KnownOne >>= ShAmt; |
| |
| // Handle the sign bits. |
| uint64_t SignBit = MVT::getIntVTSignBit(VT); |
| SignBit >>= ShAmt; // Adjust to where it is now in the mask. |
| |
| if (KnownZero & SignBit) { |
| KnownZero |= HighBits; // New bits are known zero. |
| } else if (KnownOne & SignBit) { |
| KnownOne |= HighBits; // New bits are known one. |
| } |
| } |
| return; |
| case ISD::SIGN_EXTEND_INREG: { |
| MVT::ValueType EVT = cast<VTSDNode>(Op.getOperand(1))->getVT(); |
| |
| // Sign extension. Compute the demanded bits in the result that are not |
| // present in the input. |
| uint64_t NewBits = ~MVT::getIntVTBitMask(EVT) & Mask; |
| |
| uint64_t InSignBit = MVT::getIntVTSignBit(EVT); |
| int64_t InputDemandedBits = Mask & MVT::getIntVTBitMask(EVT); |
| |
| // If the sign extended bits are demanded, we know that the sign |
| // bit is demanded. |
| if (NewBits) |
| InputDemandedBits |= InSignBit; |
| |
| ComputeMaskedBits(Op.getOperand(0), InputDemandedBits, |
| KnownZero, KnownOne, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| |
| // If the sign bit of the input is known set or clear, then we know the |
| // top bits of the result. |
| if (KnownZero & InSignBit) { // Input sign bit known clear |
| KnownZero |= NewBits; |
| KnownOne &= ~NewBits; |
| } else if (KnownOne & InSignBit) { // Input sign bit known set |
| KnownOne |= NewBits; |
| KnownZero &= ~NewBits; |
| } else { // Input sign bit unknown |
| KnownZero &= ~NewBits; |
| KnownOne &= ~NewBits; |
| } |
| return; |
| } |
| case ISD::CTTZ: |
| case ISD::CTLZ: |
| case ISD::CTPOP: { |
| MVT::ValueType VT = Op.getValueType(); |
| unsigned LowBits = Log2_32(MVT::getSizeInBits(VT))+1; |
| KnownZero = ~((1ULL << LowBits)-1) & MVT::getIntVTBitMask(VT); |
| KnownOne = 0; |
| return; |
| } |
| case ISD::LOAD: { |
| if (ISD::isZEXTLoad(Op.Val)) { |
| LoadSDNode *LD = cast<LoadSDNode>(Op); |
| MVT::ValueType VT = LD->getLoadedVT(); |
| KnownZero |= ~MVT::getIntVTBitMask(VT) & Mask; |
| } |
| return; |
| } |
| case ISD::ZERO_EXTEND: { |
| uint64_t InMask = MVT::getIntVTBitMask(Op.getOperand(0).getValueType()); |
| uint64_t NewBits = (~InMask) & Mask; |
| ComputeMaskedBits(Op.getOperand(0), Mask & InMask, KnownZero, |
| KnownOne, Depth+1); |
| KnownZero |= NewBits & Mask; |
| KnownOne &= ~NewBits; |
| return; |
| } |
| case ISD::SIGN_EXTEND: { |
| MVT::ValueType InVT = Op.getOperand(0).getValueType(); |
| unsigned InBits = MVT::getSizeInBits(InVT); |
| uint64_t InMask = MVT::getIntVTBitMask(InVT); |
| uint64_t InSignBit = 1ULL << (InBits-1); |
| uint64_t NewBits = (~InMask) & Mask; |
| uint64_t InDemandedBits = Mask & InMask; |
| |
| // If any of the sign extended bits are demanded, we know that the sign |
| // bit is demanded. |
| if (NewBits & Mask) |
| InDemandedBits |= InSignBit; |
| |
| ComputeMaskedBits(Op.getOperand(0), InDemandedBits, KnownZero, |
| KnownOne, Depth+1); |
| // If the sign bit is known zero or one, the top bits match. |
| if (KnownZero & InSignBit) { |
| KnownZero |= NewBits; |
| KnownOne &= ~NewBits; |
| } else if (KnownOne & InSignBit) { |
| KnownOne |= NewBits; |
| KnownZero &= ~NewBits; |
| } else { // Otherwise, top bits aren't known. |
| KnownOne &= ~NewBits; |
| KnownZero &= ~NewBits; |
| } |
| return; |
| } |
| case ISD::ANY_EXTEND: { |
| MVT::ValueType VT = Op.getOperand(0).getValueType(); |
| ComputeMaskedBits(Op.getOperand(0), Mask & MVT::getIntVTBitMask(VT), |
| KnownZero, KnownOne, Depth+1); |
| return; |
| } |
| case ISD::TRUNCATE: { |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero, KnownOne, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| uint64_t OutMask = MVT::getIntVTBitMask(Op.getValueType()); |
| KnownZero &= OutMask; |
| KnownOne &= OutMask; |
| break; |
| } |
| case ISD::AssertZext: { |
| MVT::ValueType VT = cast<VTSDNode>(Op.getOperand(1))->getVT(); |
| uint64_t InMask = MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op.getOperand(0), Mask & InMask, KnownZero, |
| KnownOne, Depth+1); |
| KnownZero |= (~InMask) & Mask; |
| return; |
| } |
| case ISD::ADD: { |
| // If either the LHS or the RHS are Zero, the result is zero. |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero, KnownOne, Depth+1); |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero2, KnownOne2, Depth+1); |
| assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?"); |
| assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?"); |
| |
| // Output known-0 bits are known if clear or set in both the low clear bits |
| // common to both LHS & RHS. For example, 8+(X<<3) is known to have the |
| // low 3 bits clear. |
| uint64_t KnownZeroOut = std::min(CountTrailingZeros_64(~KnownZero), |
| CountTrailingZeros_64(~KnownZero2)); |
| |
| KnownZero = (1ULL << KnownZeroOut) - 1; |
| KnownOne = 0; |
| return; |
| } |
| case ISD::SUB: { |
| ConstantSDNode *CLHS = dyn_cast<ConstantSDNode>(Op.getOperand(0)); |
| if (!CLHS) return; |
| |
| // We know that the top bits of C-X are clear if X contains less bits |
| // than C (i.e. no wrap-around can happen). For example, 20-X is |
| // positive if we can prove that X is >= 0 and < 16. |
| MVT::ValueType VT = CLHS->getValueType(0); |
| if ((CLHS->getValue() & MVT::getIntVTSignBit(VT)) == 0) { // sign bit clear |
| unsigned NLZ = CountLeadingZeros_64(CLHS->getValue()+1); |
| uint64_t MaskV = (1ULL << (63-NLZ))-1; // NLZ can't be 64 with no sign bit |
| MaskV = ~MaskV & MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op.getOperand(1), MaskV, KnownZero, KnownOne, Depth+1); |
| |
| // If all of the MaskV bits are known to be zero, then we know the output |
| // top bits are zero, because we now know that the output is from [0-C]. |
| if ((KnownZero & MaskV) == MaskV) { |
| unsigned NLZ2 = CountLeadingZeros_64(CLHS->getValue()); |
| KnownZero = ~((1ULL << (64-NLZ2))-1) & Mask; // Top bits known zero. |
| KnownOne = 0; // No one bits known. |
| } else { |
| KnownZero = KnownOne = 0; // Otherwise, nothing known. |
| } |
| } |
| return; |
| } |
| default: |
| // Allow the target to implement this method for its nodes. |
| if (Op.getOpcode() >= ISD::BUILTIN_OP_END) { |
| case ISD::INTRINSIC_WO_CHAIN: |
| case ISD::INTRINSIC_W_CHAIN: |
| case ISD::INTRINSIC_VOID: |
| computeMaskedBitsForTargetNode(Op, Mask, KnownZero, KnownOne); |
| } |
| return; |
| } |
| } |
| |
| /// computeMaskedBitsForTargetNode - Determine which of the bits specified |
| /// in Mask are known to be either zero or one and return them in the |
| /// KnownZero/KnownOne bitsets. |
| void TargetLowering::computeMaskedBitsForTargetNode(const SDOperand Op, |
| uint64_t Mask, |
| uint64_t &KnownZero, |
| uint64_t &KnownOne, |
| unsigned Depth) const { |
| assert((Op.getOpcode() >= ISD::BUILTIN_OP_END || |
| Op.getOpcode() == ISD::INTRINSIC_WO_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_W_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_VOID) && |
| "Should use MaskedValueIsZero if you don't know whether Op" |
| " is a target node!"); |
| KnownZero = 0; |
| KnownOne = 0; |
| } |
| |
| /// ComputeNumSignBits - Return the number of times the sign bit of the |
| /// register is replicated into the other bits. We know that at least 1 bit |
| /// is always equal to the sign bit (itself), but other cases can give us |
| /// information. For example, immediately after an "SRA X, 2", we know that |
| /// the top 3 bits are all equal to each other, so we return 3. |
| unsigned TargetLowering::ComputeNumSignBits(SDOperand Op, unsigned Depth) const{ |
| MVT::ValueType VT = Op.getValueType(); |
| assert(MVT::isInteger(VT) && "Invalid VT!"); |
| unsigned VTBits = MVT::getSizeInBits(VT); |
| unsigned Tmp, Tmp2; |
| |
| if (Depth == 6) |
| return 1; // Limit search depth. |
| |
| switch (Op.getOpcode()) { |
| default: break; |
| case ISD::AssertSext: |
| Tmp = MVT::getSizeInBits(cast<VTSDNode>(Op.getOperand(1))->getVT()); |
| return VTBits-Tmp+1; |
| case ISD::AssertZext: |
| Tmp = MVT::getSizeInBits(cast<VTSDNode>(Op.getOperand(1))->getVT()); |
| return VTBits-Tmp; |
| |
| case ISD::Constant: { |
| uint64_t Val = cast<ConstantSDNode>(Op)->getValue(); |
| // If negative, invert the bits, then look at it. |
| if (Val & MVT::getIntVTSignBit(VT)) |
| Val = ~Val; |
| |
| // Shift the bits so they are the leading bits in the int64_t. |
| Val <<= 64-VTBits; |
| |
| // Return # leading zeros. We use 'min' here in case Val was zero before |
| // shifting. We don't want to return '64' as for an i32 "0". |
| return std::min(VTBits, CountLeadingZeros_64(Val)); |
| } |
| |
| case ISD::SIGN_EXTEND: |
| Tmp = VTBits-MVT::getSizeInBits(Op.getOperand(0).getValueType()); |
| return ComputeNumSignBits(Op.getOperand(0), Depth+1) + Tmp; |
| |
| case ISD::SIGN_EXTEND_INREG: |
| // Max of the input and what this extends. |
| Tmp = MVT::getSizeInBits(cast<VTSDNode>(Op.getOperand(1))->getVT()); |
| Tmp = VTBits-Tmp+1; |
| |
| Tmp2 = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| return std::max(Tmp, Tmp2); |
| |
| case ISD::SRA: |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| // SRA X, C -> adds C sign bits. |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| Tmp += C->getValue(); |
| if (Tmp > VTBits) Tmp = VTBits; |
| } |
| return Tmp; |
| case ISD::SHL: |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| // shl destroys sign bits. |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (C->getValue() >= VTBits || // Bad shift. |
| C->getValue() >= Tmp) break; // Shifted all sign bits out. |
| return Tmp - C->getValue(); |
| } |
| break; |
| case ISD::AND: |
| case ISD::OR: |
| case ISD::XOR: // NOT is handled here. |
| // Logical binary ops preserve the number of sign bits. |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (Tmp == 1) return 1; // Early out. |
| Tmp2 = ComputeNumSignBits(Op.getOperand(1), Depth+1); |
| return std::min(Tmp, Tmp2); |
| |
| case ISD::SELECT: |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (Tmp == 1) return 1; // Early out. |
| Tmp2 = ComputeNumSignBits(Op.getOperand(1), Depth+1); |
| return std::min(Tmp, Tmp2); |
| |
| case ISD::SETCC: |
| // If setcc returns 0/-1, all bits are sign bits. |
| if (getSetCCResultContents() == ZeroOrNegativeOneSetCCResult) |
| return VTBits; |
| break; |
| case ISD::ROTL: |
| case ISD::ROTR: |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) { |
| unsigned RotAmt = C->getValue() & (VTBits-1); |
| |
| // Handle rotate right by N like a rotate left by 32-N. |
| if (Op.getOpcode() == ISD::ROTR) |
| RotAmt = (VTBits-RotAmt) & (VTBits-1); |
| |
| // If we aren't rotating out all of the known-in sign bits, return the |
| // number that are left. This handles rotl(sext(x), 1) for example. |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (Tmp > RotAmt+1) return Tmp-RotAmt; |
| } |
| break; |
| case ISD::ADD: |
| // Add can have at most one carry bit. Thus we know that the output |
| // is, at worst, one more bit than the inputs. |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (Tmp == 1) return 1; // Early out. |
| |
| // Special case decrementing a value (ADD X, -1): |
| if (ConstantSDNode *CRHS = dyn_cast<ConstantSDNode>(Op.getOperand(0))) |
| if (CRHS->isAllOnesValue()) { |
| uint64_t KnownZero, KnownOne; |
| uint64_t Mask = MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op.getOperand(0), Mask, KnownZero, KnownOne, Depth+1); |
| |
| // If the input is known to be 0 or 1, the output is 0/-1, which is all |
| // sign bits set. |
| if ((KnownZero|1) == Mask) |
| return VTBits; |
| |
| // If we are subtracting one from a positive number, there is no carry |
| // out of the result. |
| if (KnownZero & MVT::getIntVTSignBit(VT)) |
| return Tmp; |
| } |
| |
| Tmp2 = ComputeNumSignBits(Op.getOperand(1), Depth+1); |
| if (Tmp2 == 1) return 1; |
| return std::min(Tmp, Tmp2)-1; |
| break; |
| |
| case ISD::SUB: |
| Tmp2 = ComputeNumSignBits(Op.getOperand(1), Depth+1); |
| if (Tmp2 == 1) return 1; |
| |
| // Handle NEG. |
| if (ConstantSDNode *CLHS = dyn_cast<ConstantSDNode>(Op.getOperand(0))) |
| if (CLHS->getValue() == 0) { |
| uint64_t KnownZero, KnownOne; |
| uint64_t Mask = MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op.getOperand(1), Mask, KnownZero, KnownOne, Depth+1); |
| // If the input is known to be 0 or 1, the output is 0/-1, which is all |
| // sign bits set. |
| if ((KnownZero|1) == Mask) |
| return VTBits; |
| |
| // If the input is known to be positive (the sign bit is known clear), |
| // the output of the NEG has the same number of sign bits as the input. |
| if (KnownZero & MVT::getIntVTSignBit(VT)) |
| return Tmp2; |
| |
| // Otherwise, we treat this like a SUB. |
| } |
| |
| // Sub can have at most one carry bit. Thus we know that the output |
| // is, at worst, one more bit than the inputs. |
| Tmp = ComputeNumSignBits(Op.getOperand(0), Depth+1); |
| if (Tmp == 1) return 1; // Early out. |
| return std::min(Tmp, Tmp2)-1; |
| break; |
| case ISD::TRUNCATE: |
| // FIXME: it's tricky to do anything useful for this, but it is an important |
| // case for targets like X86. |
| break; |
| } |
| |
| // Handle LOADX separately here. EXTLOAD case will fallthrough. |
| if (Op.getOpcode() == ISD::LOAD) { |
| LoadSDNode *LD = cast<LoadSDNode>(Op); |
| unsigned ExtType = LD->getExtensionType(); |
| switch (ExtType) { |
| default: break; |
| case ISD::SEXTLOAD: // '17' bits known |
| Tmp = MVT::getSizeInBits(LD->getLoadedVT()); |
| return VTBits-Tmp+1; |
| case ISD::ZEXTLOAD: // '16' bits known |
| Tmp = MVT::getSizeInBits(LD->getLoadedVT()); |
| return VTBits-Tmp; |
| } |
| } |
| |
| // Allow the target to implement this method for its nodes. |
| if (Op.getOpcode() >= ISD::BUILTIN_OP_END || |
| Op.getOpcode() == ISD::INTRINSIC_WO_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_W_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_VOID) { |
| unsigned NumBits = ComputeNumSignBitsForTargetNode(Op, Depth); |
| if (NumBits > 1) return NumBits; |
| } |
| |
| // Finally, if we can prove that the top bits of the result are 0's or 1's, |
| // use this information. |
| uint64_t KnownZero, KnownOne; |
| uint64_t Mask = MVT::getIntVTBitMask(VT); |
| ComputeMaskedBits(Op, Mask, KnownZero, KnownOne, Depth); |
| |
| uint64_t SignBit = MVT::getIntVTSignBit(VT); |
| if (KnownZero & SignBit) { // SignBit is 0 |
| Mask = KnownZero; |
| } else if (KnownOne & SignBit) { // SignBit is 1; |
| Mask = KnownOne; |
| } else { |
| // Nothing known. |
| return 1; |
| } |
| |
| // Okay, we know that the sign bit in Mask is set. Use CLZ to determine |
| // the number of identical bits in the top of the input value. |
| Mask ^= ~0ULL; |
| Mask <<= 64-VTBits; |
| // Return # leading zeros. We use 'min' here in case Val was zero before |
| // shifting. We don't want to return '64' as for an i32 "0". |
| return std::min(VTBits, CountLeadingZeros_64(Mask)); |
| } |
| |
| |
| |
| /// ComputeNumSignBitsForTargetNode - This method can be implemented by |
| /// targets that want to expose additional information about sign bits to the |
| /// DAG Combiner. |
| unsigned TargetLowering::ComputeNumSignBitsForTargetNode(SDOperand Op, |
| unsigned Depth) const { |
| assert((Op.getOpcode() >= ISD::BUILTIN_OP_END || |
| Op.getOpcode() == ISD::INTRINSIC_WO_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_W_CHAIN || |
| Op.getOpcode() == ISD::INTRINSIC_VOID) && |
| "Should use ComputeNumSignBits if you don't know whether Op" |
| " is a target node!"); |
| return 1; |
| } |
| |
| |
| /// SimplifySetCC - Try to simplify a setcc built with the specified operands |
| /// and cc. If it is unable to simplify it, return a null SDOperand. |
| SDOperand |
| TargetLowering::SimplifySetCC(MVT::ValueType VT, SDOperand N0, SDOperand N1, |
| ISD::CondCode Cond, bool foldBooleans, |
| DAGCombinerInfo &DCI) const { |
| SelectionDAG &DAG = DCI.DAG; |
| |
| // These setcc operations always fold. |
| switch (Cond) { |
| default: break; |
| case ISD::SETFALSE: |
| case ISD::SETFALSE2: return DAG.getConstant(0, VT); |
| case ISD::SETTRUE: |
| case ISD::SETTRUE2: return DAG.getConstant(1, VT); |
| } |
| |
| if (ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1.Val)) { |
| uint64_t C1 = N1C->getValue(); |
| if (isa<ConstantSDNode>(N0.Val)) { |
| return DAG.FoldSetCC(VT, N0, N1, Cond); |
| } else { |
| // If the LHS is '(srl (ctlz x), 5)', the RHS is 0/1, and this is an |
| // equality comparison, then we're just comparing whether X itself is |
| // zero. |
| if (N0.getOpcode() == ISD::SRL && (C1 == 0 || C1 == 1) && |
| N0.getOperand(0).getOpcode() == ISD::CTLZ && |
| N0.getOperand(1).getOpcode() == ISD::Constant) { |
| unsigned ShAmt = cast<ConstantSDNode>(N0.getOperand(1))->getValue(); |
| if ((Cond == ISD::SETEQ || Cond == ISD::SETNE) && |
| ShAmt == Log2_32(MVT::getSizeInBits(N0.getValueType()))) { |
| if ((C1 == 0) == (Cond == ISD::SETEQ)) { |
| // (srl (ctlz x), 5) == 0 -> X != 0 |
| // (srl (ctlz x), 5) != 1 -> X != 0 |
| Cond = ISD::SETNE; |
| } else { |
| // (srl (ctlz x), 5) != 0 -> X == 0 |
| // (srl (ctlz x), 5) == 1 -> X == 0 |
| Cond = ISD::SETEQ; |
| } |
| SDOperand Zero = DAG.getConstant(0, N0.getValueType()); |
| return DAG.getSetCC(VT, N0.getOperand(0).getOperand(0), |
| Zero, Cond); |
| } |
| } |
| |
| // If the LHS is a ZERO_EXTEND, perform the comparison on the input. |
| if (N0.getOpcode() == ISD::ZERO_EXTEND) { |
| unsigned InSize = MVT::getSizeInBits(N0.getOperand(0).getValueType()); |
| |
| // If the comparison constant has bits in the upper part, the |
| // zero-extended value could never match. |
| if (C1 & (~0ULL << InSize)) { |
| unsigned VSize = MVT::getSizeInBits(N0.getValueType()); |
| switch (Cond) { |
| case ISD::SETUGT: |
| case ISD::SETUGE: |
| case ISD::SETEQ: return DAG.getConstant(0, VT); |
| case ISD::SETULT: |
| case ISD::SETULE: |
| case ISD::SETNE: return DAG.getConstant(1, VT); |
| case ISD::SETGT: |
| case ISD::SETGE: |
| // True if the sign bit of C1 is set. |
| return DAG.getConstant((C1 & (1ULL << (VSize-1))) != 0, VT); |
| case ISD::SETLT: |
| case ISD::SETLE: |
| // True if the sign bit of C1 isn't set. |
| return DAG.getConstant((C1 & (1ULL << (VSize-1))) == 0, VT); |
| default: |
| break; |
| } |
| } |
| |
| // Otherwise, we can perform the comparison with the low bits. |
| switch (Cond) { |
| case ISD::SETEQ: |
| case ISD::SETNE: |
| case ISD::SETUGT: |
| case ISD::SETUGE: |
| case ISD::SETULT: |
| case ISD::SETULE: |
| return DAG.getSetCC(VT, N0.getOperand(0), |
| DAG.getConstant(C1, N0.getOperand(0).getValueType()), |
| Cond); |
| default: |
| break; // todo, be more careful with signed comparisons |
| } |
| } else if (N0.getOpcode() == ISD::SIGN_EXTEND_INREG && |
| (Cond == ISD::SETEQ || Cond == ISD::SETNE)) { |
| MVT::ValueType ExtSrcTy = cast<VTSDNode>(N0.getOperand(1))->getVT(); |
| unsigned ExtSrcTyBits = MVT::getSizeInBits(ExtSrcTy); |
| MVT::ValueType ExtDstTy = N0.getValueType(); |
| unsigned ExtDstTyBits = MVT::getSizeInBits(ExtDstTy); |
| |
| // If the extended part has any inconsistent bits, it cannot ever |
| // compare equal. In other words, they have to be all ones or all |
| // zeros. |
| uint64_t ExtBits = |
| (~0ULL >> (64-ExtSrcTyBits)) & (~0ULL << (ExtDstTyBits-1)); |
| if ((C1 & ExtBits) != 0 && (C1 & ExtBits) != ExtBits) |
| return DAG.getConstant(Cond == ISD::SETNE, VT); |
| |
| SDOperand ZextOp; |
| MVT::ValueType Op0Ty = N0.getOperand(0).getValueType(); |
| if (Op0Ty == ExtSrcTy) { |
| ZextOp = N0.getOperand(0); |
| } else { |
| int64_t Imm = ~0ULL >> (64-ExtSrcTyBits); |
| ZextOp = DAG.getNode(ISD::AND, Op0Ty, N0.getOperand(0), |
| DAG.getConstant(Imm, Op0Ty)); |
| } |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(ZextOp.Val); |
| // Otherwise, make this a use of a zext. |
| return DAG.getSetCC(VT, ZextOp, |
| DAG.getConstant(C1 & (~0ULL>>(64-ExtSrcTyBits)), |
| ExtDstTy), |
| Cond); |
| } else if ((N1C->getValue() == 0 || N1C->getValue() == 1) && |
| (Cond == ISD::SETEQ || Cond == ISD::SETNE)) { |
| |
| // SETCC (SETCC), [0|1], [EQ|NE] -> SETCC |
| if (N0.getOpcode() == ISD::SETCC) { |
| bool TrueWhenTrue = (Cond == ISD::SETEQ) ^ (N1C->getValue() != 1); |
| if (TrueWhenTrue) |
| return N0; |
| |
| // Invert the condition. |
| ISD::CondCode CC = cast<CondCodeSDNode>(N0.getOperand(2))->get(); |
| CC = ISD::getSetCCInverse(CC, |
| MVT::isInteger(N0.getOperand(0).getValueType())); |
| return DAG.getSetCC(VT, N0.getOperand(0), N0.getOperand(1), CC); |
| } |
| |
| if ((N0.getOpcode() == ISD::XOR || |
| (N0.getOpcode() == ISD::AND && |
| N0.getOperand(0).getOpcode() == ISD::XOR && |
| N0.getOperand(1) == N0.getOperand(0).getOperand(1))) && |
| isa<ConstantSDNode>(N0.getOperand(1)) && |
| cast<ConstantSDNode>(N0.getOperand(1))->getValue() == 1) { |
| // If this is (X^1) == 0/1, swap the RHS and eliminate the xor. We |
| // can only do this if the top bits are known zero. |
| if (MaskedValueIsZero(N0, MVT::getIntVTBitMask(N0.getValueType())-1)){ |
| // Okay, get the un-inverted input value. |
| SDOperand Val; |
| if (N0.getOpcode() == ISD::XOR) |
| Val = N0.getOperand(0); |
| else { |
| assert(N0.getOpcode() == ISD::AND && |
| N0.getOperand(0).getOpcode() == ISD::XOR); |
| // ((X^1)&1)^1 -> X & 1 |
| Val = DAG.getNode(ISD::AND, N0.getValueType(), |
| N0.getOperand(0).getOperand(0), |
| N0.getOperand(1)); |
| } |
| return DAG.getSetCC(VT, Val, N1, |
| Cond == ISD::SETEQ ? ISD::SETNE : ISD::SETEQ); |
| } |
| } |
| } |
| |
| uint64_t MinVal, MaxVal; |
| unsigned OperandBitSize = MVT::getSizeInBits(N1C->getValueType(0)); |
| if (ISD::isSignedIntSetCC(Cond)) { |
| MinVal = 1ULL << (OperandBitSize-1); |
| if (OperandBitSize != 1) // Avoid X >> 64, which is undefined. |
| MaxVal = ~0ULL >> (65-OperandBitSize); |
| else |
| MaxVal = 0; |
| } else { |
| MinVal = 0; |
| MaxVal = ~0ULL >> (64-OperandBitSize); |
| } |
| |
| // Canonicalize GE/LE comparisons to use GT/LT comparisons. |
| if (Cond == ISD::SETGE || Cond == ISD::SETUGE) { |
| if (C1 == MinVal) return DAG.getConstant(1, VT); // X >= MIN --> true |
| --C1; // X >= C0 --> X > (C0-1) |
| return DAG.getSetCC(VT, N0, DAG.getConstant(C1, N1.getValueType()), |
| (Cond == ISD::SETGE) ? ISD::SETGT : ISD::SETUGT); |
| } |
| |
| if (Cond == ISD::SETLE || Cond == ISD::SETULE) { |
| if (C1 == MaxVal) return DAG.getConstant(1, VT); // X <= MAX --> true |
| ++C1; // X <= C0 --> X < (C0+1) |
| return DAG.getSetCC(VT, N0, DAG.getConstant(C1, N1.getValueType()), |
| (Cond == ISD::SETLE) ? ISD::SETLT : ISD::SETULT); |
| } |
| |
| if ((Cond == ISD::SETLT || Cond == ISD::SETULT) && C1 == MinVal) |
| return DAG.getConstant(0, VT); // X < MIN --> false |
| if ((Cond == ISD::SETGE || Cond == ISD::SETUGE) && C1 == MinVal) |
| return DAG.getConstant(1, VT); // X >= MIN --> true |
| if ((Cond == ISD::SETGT || Cond == ISD::SETUGT) && C1 == MaxVal) |
| return DAG.getConstant(0, VT); // X > MAX --> false |
| if ((Cond == ISD::SETLE || Cond == ISD::SETULE) && C1 == MaxVal) |
| return DAG.getConstant(1, VT); // X <= MAX --> true |
| |
| // Canonicalize setgt X, Min --> setne X, Min |
| if ((Cond == ISD::SETGT || Cond == ISD::SETUGT) && C1 == MinVal) |
| return DAG.getSetCC(VT, N0, N1, ISD::SETNE); |
| // Canonicalize setlt X, Max --> setne X, Max |
| if ((Cond == ISD::SETLT || Cond == ISD::SETULT) && C1 == MaxVal) |
| return DAG.getSetCC(VT, N0, N1, ISD::SETNE); |
| |
| // If we have setult X, 1, turn it into seteq X, 0 |
| if ((Cond == ISD::SETLT || Cond == ISD::SETULT) && C1 == MinVal+1) |
| return DAG.getSetCC(VT, N0, DAG.getConstant(MinVal, N0.getValueType()), |
| ISD::SETEQ); |
| // If we have setugt X, Max-1, turn it into seteq X, Max |
| else if ((Cond == ISD::SETGT || Cond == ISD::SETUGT) && C1 == MaxVal-1) |
| return DAG.getSetCC(VT, N0, DAG.getConstant(MaxVal, N0.getValueType()), |
| ISD::SETEQ); |
| |
| // If we have "setcc X, C0", check to see if we can shrink the immediate |
| // by changing cc. |
| |
| // SETUGT X, SINTMAX -> SETLT X, 0 |
| if (Cond == ISD::SETUGT && OperandBitSize != 1 && |
| C1 == (~0ULL >> (65-OperandBitSize))) |
| return DAG.getSetCC(VT, N0, DAG.getConstant(0, N1.getValueType()), |
| ISD::SETLT); |
| |
| // FIXME: Implement the rest of these. |
| |
| // Fold bit comparisons when we can. |
| if ((Cond == ISD::SETEQ || Cond == ISD::SETNE) && |
| VT == N0.getValueType() && N0.getOpcode() == ISD::AND) |
| if (ConstantSDNode *AndRHS = |
| dyn_cast<ConstantSDNode>(N0.getOperand(1))) { |
| if (Cond == ISD::SETNE && C1 == 0) {// (X & 8) != 0 --> (X & 8) >> 3 |
| // Perform the xform if the AND RHS is a single bit. |
| if (isPowerOf2_64(AndRHS->getValue())) { |
| return DAG.getNode(ISD::SRL, VT, N0, |
| DAG.getConstant(Log2_64(AndRHS->getValue()), |
| getShiftAmountTy())); |
| } |
| } else if (Cond == ISD::SETEQ && C1 == AndRHS->getValue()) { |
| // (X & 8) == 8 --> (X & 8) >> 3 |
| // Perform the xform if C1 is a single bit. |
| if (isPowerOf2_64(C1)) { |
| return DAG.getNode(ISD::SRL, VT, N0, |
| DAG.getConstant(Log2_64(C1), getShiftAmountTy())); |
| } |
| } |
| } |
| } |
| } else if (isa<ConstantSDNode>(N0.Val)) { |
| // Ensure that the constant occurs on the RHS. |
| return DAG.getSetCC(VT, N1, N0, ISD::getSetCCSwappedOperands(Cond)); |
| } |
| |
| if (isa<ConstantFPSDNode>(N0.Val)) { |
| // Constant fold or commute setcc. |
| SDOperand O = DAG.FoldSetCC(VT, N0, N1, Cond); |
| if (O.Val) return O; |
| } |
| |
| if (N0 == N1) { |
| // We can always fold X == X for integer setcc's. |
| if (MVT::isInteger(N0.getValueType())) |
| return DAG.getConstant(ISD::isTrueWhenEqual(Cond), VT); |
| unsigned UOF = ISD::getUnorderedFlavor(Cond); |
| if (UOF == 2) // FP operators that are undefined on NaNs. |
| return DAG.getConstant(ISD::isTrueWhenEqual(Cond), VT); |
| if (UOF == unsigned(ISD::isTrueWhenEqual(Cond))) |
| return DAG.getConstant(UOF, VT); |
| // Otherwise, we can't fold it. However, we can simplify it to SETUO/SETO |
| // if it is not already. |
| ISD::CondCode NewCond = UOF == 0 ? ISD::SETO : ISD::SETUO; |
| if (NewCond != Cond) |
| return DAG.getSetCC(VT, N0, N1, NewCond); |
| } |
| |
| if ((Cond == ISD::SETEQ || Cond == ISD::SETNE) && |
| MVT::isInteger(N0.getValueType())) { |
| if (N0.getOpcode() == ISD::ADD || N0.getOpcode() == ISD::SUB || |
| N0.getOpcode() == ISD::XOR) { |
| // Simplify (X+Y) == (X+Z) --> Y == Z |
| if (N0.getOpcode() == N1.getOpcode()) { |
| if (N0.getOperand(0) == N1.getOperand(0)) |
| return DAG.getSetCC(VT, N0.getOperand(1), N1.getOperand(1), Cond); |
| if (N0.getOperand(1) == N1.getOperand(1)) |
| return DAG.getSetCC(VT, N0.getOperand(0), N1.getOperand(0), Cond); |
| if (DAG.isCommutativeBinOp(N0.getOpcode())) { |
| // If X op Y == Y op X, try other combinations. |
| if (N0.getOperand(0) == N1.getOperand(1)) |
| return DAG.getSetCC(VT, N0.getOperand(1), N1.getOperand(0), Cond); |
| if (N0.getOperand(1) == N1.getOperand(0)) |
| return DAG.getSetCC(VT, N0.getOperand(0), N1.getOperand(1), Cond); |
| } |
| } |
| |
| if (ConstantSDNode *RHSC = dyn_cast<ConstantSDNode>(N1)) { |
| if (ConstantSDNode *LHSR = dyn_cast<ConstantSDNode>(N0.getOperand(1))) { |
| // Turn (X+C1) == C2 --> X == C2-C1 |
| if (N0.getOpcode() == ISD::ADD && N0.Val->hasOneUse()) { |
| return DAG.getSetCC(VT, N0.getOperand(0), |
| DAG.getConstant(RHSC->getValue()-LHSR->getValue(), |
| N0.getValueType()), Cond); |
| } |
| |
| // Turn (X^C1) == C2 into X == C1^C2 iff X&~C1 = 0. |
| if (N0.getOpcode() == ISD::XOR) |
| // If we know that all of the inverted bits are zero, don't bother |
| // performing the inversion. |
| if (MaskedValueIsZero(N0.getOperand(0), ~LHSR->getValue())) |
| return DAG.getSetCC(VT, N0.getOperand(0), |
| DAG.getConstant(LHSR->getValue()^RHSC->getValue(), |
| N0.getValueType()), Cond); |
| } |
| |
| // Turn (C1-X) == C2 --> X == C1-C2 |
| if (ConstantSDNode *SUBC = dyn_cast<ConstantSDNode>(N0.getOperand(0))) { |
| if (N0.getOpcode() == ISD::SUB && N0.Val->hasOneUse()) { |
| return DAG.getSetCC(VT, N0.getOperand(1), |
| DAG.getConstant(SUBC->getValue()-RHSC->getValue(), |
| N0.getValueType()), Cond); |
| } |
| } |
| } |
| |
| // Simplify (X+Z) == X --> Z == 0 |
| if (N0.getOperand(0) == N1) |
| return DAG.getSetCC(VT, N0.getOperand(1), |
| DAG.getConstant(0, N0.getValueType()), Cond); |
| if (N0.getOperand(1) == N1) { |
| if (DAG.isCommutativeBinOp(N0.getOpcode())) |
| return DAG.getSetCC(VT, N0.getOperand(0), |
| DAG.getConstant(0, N0.getValueType()), Cond); |
| else { |
| assert(N0.getOpcode() == ISD::SUB && "Unexpected operation!"); |
| // (Z-X) == X --> Z == X<<1 |
| SDOperand SH = DAG.getNode(ISD::SHL, N1.getValueType(), |
| N1, |
| DAG.getConstant(1, getShiftAmountTy())); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(SH.Val); |
| return DAG.getSetCC(VT, N0.getOperand(0), SH, Cond); |
| } |
| } |
| } |
| |
| if (N1.getOpcode() == ISD::ADD || N1.getOpcode() == ISD::SUB || |
| N1.getOpcode() == ISD::XOR) { |
| // Simplify X == (X+Z) --> Z == 0 |
| if (N1.getOperand(0) == N0) { |
| return DAG.getSetCC(VT, N1.getOperand(1), |
| DAG.getConstant(0, N1.getValueType()), Cond); |
| } else if (N1.getOperand(1) == N0) { |
| if (DAG.isCommutativeBinOp(N1.getOpcode())) { |
| return DAG.getSetCC(VT, N1.getOperand(0), |
| DAG.getConstant(0, N1.getValueType()), Cond); |
| } else { |
| assert(N1.getOpcode() == ISD::SUB && "Unexpected operation!"); |
| // X == (Z-X) --> X<<1 == Z |
| SDOperand SH = DAG.getNode(ISD::SHL, N1.getValueType(), N0, |
| DAG.getConstant(1, getShiftAmountTy())); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(SH.Val); |
| return DAG.getSetCC(VT, SH, N1.getOperand(0), Cond); |
| } |
| } |
| } |
| } |
| |
| // Fold away ALL boolean setcc's. |
| SDOperand Temp; |
| if (N0.getValueType() == MVT::i1 && foldBooleans) { |
| switch (Cond) { |
| default: assert(0 && "Unknown integer setcc!"); |
| case ISD::SETEQ: // X == Y -> (X^Y)^1 |
| Temp = DAG.getNode(ISD::XOR, MVT::i1, N0, N1); |
| N0 = DAG.getNode(ISD::XOR, MVT::i1, Temp, DAG.getConstant(1, MVT::i1)); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(Temp.Val); |
| break; |
| case ISD::SETNE: // X != Y --> (X^Y) |
| N0 = DAG.getNode(ISD::XOR, MVT::i1, N0, N1); |
| break; |
| case ISD::SETGT: // X >s Y --> X == 0 & Y == 1 --> X^1 & Y |
| case ISD::SETULT: // X <u Y --> X == 0 & Y == 1 --> X^1 & Y |
| Temp = DAG.getNode(ISD::XOR, MVT::i1, N0, DAG.getConstant(1, MVT::i1)); |
| N0 = DAG.getNode(ISD::AND, MVT::i1, N1, Temp); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(Temp.Val); |
| break; |
| case ISD::SETLT: // X <s Y --> X == 1 & Y == 0 --> Y^1 & X |
| case ISD::SETUGT: // X >u Y --> X == 1 & Y == 0 --> Y^1 & X |
| Temp = DAG.getNode(ISD::XOR, MVT::i1, N1, DAG.getConstant(1, MVT::i1)); |
| N0 = DAG.getNode(ISD::AND, MVT::i1, N0, Temp); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(Temp.Val); |
| break; |
| case ISD::SETULE: // X <=u Y --> X == 0 | Y == 1 --> X^1 | Y |
| case ISD::SETGE: // X >=s Y --> X == 0 | Y == 1 --> X^1 | Y |
| Temp = DAG.getNode(ISD::XOR, MVT::i1, N0, DAG.getConstant(1, MVT::i1)); |
| N0 = DAG.getNode(ISD::OR, MVT::i1, N1, Temp); |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(Temp.Val); |
| break; |
| case ISD::SETUGE: // X >=u Y --> X == 1 | Y == 0 --> Y^1 | X |
| case ISD::SETLE: // X <=s Y --> X == 1 | Y == 0 --> Y^1 | X |
| Temp = DAG.getNode(ISD::XOR, MVT::i1, N1, DAG.getConstant(1, MVT::i1)); |
| N0 = DAG.getNode(ISD::OR, MVT::i1, N0, Temp); |
| break; |
| } |
| if (VT != MVT::i1) { |
| if (!DCI.isCalledByLegalizer()) |
| DCI.AddToWorklist(N0.Val); |
| // FIXME: If running after legalize, we probably can't do this. |
| N0 = DAG.getNode(ISD::ZERO_EXTEND, VT, N0); |
| } |
| return N0; |
| } |
| |
| // Could not fold it. |
| return SDOperand(); |
| } |
| |
| SDOperand TargetLowering:: |
| PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const { |
| // Default implementation: no optimization. |
| return SDOperand(); |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Inline Assembler Implementation Methods |
| //===----------------------------------------------------------------------===// |
| |
| TargetLowering::ConstraintType |
| TargetLowering::getConstraintType(const std::string &Constraint) const { |
| // FIXME: lots more standard ones to handle. |
| if (Constraint.size() == 1) { |
| switch (Constraint[0]) { |
| default: break; |
| case 'r': return C_RegisterClass; |
| case 'm': // memory |
| case 'o': // offsetable |
| case 'V': // not offsetable |
| return C_Memory; |
| case 'i': // Simple Integer or Relocatable Constant |
| case 'n': // Simple Integer |
| case 's': // Relocatable Constant |
| case 'I': // Target registers. |
| case 'J': |
| case 'K': |
| case 'L': |
| case 'M': |
| case 'N': |
| case 'O': |
| case 'P': |
| return C_Other; |
| } |
| } |
| |
| if (Constraint.size() > 1 && Constraint[0] == '{' && |
| Constraint[Constraint.size()-1] == '}') |
| return C_Register; |
| return C_Unknown; |
| } |
| |
| /// isOperandValidForConstraint - Return the specified operand (possibly |
| /// modified) if the specified SDOperand is valid for the specified target |
| /// constraint letter, otherwise return null. |
| SDOperand TargetLowering::isOperandValidForConstraint(SDOperand Op, |
| char ConstraintLetter, |
| SelectionDAG &DAG) { |
| switch (ConstraintLetter) { |
| default: break; |
| case 'i': // Simple Integer or Relocatable Constant |
| case 'n': // Simple Integer |
| case 's': // Relocatable Constant |
| // These are okay if the operand is either a global variable address or a |
| // simple immediate value. If we have one of these, map to the TargetXXX |
| // version so that the value itself doesn't get selected. |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op)) { |
| // Simple constants are not allowed for 's'. |
| if (ConstraintLetter != 's') |
| return DAG.getTargetConstant(C->getValue(), Op.getValueType()); |
| } |
| if (GlobalAddressSDNode *GA = dyn_cast<GlobalAddressSDNode>(Op)) { |
| if (ConstraintLetter != 'n') |
| return DAG.getTargetGlobalAddress(GA->getGlobal(), Op.getValueType(), |
| GA->getOffset()); |
| } |
| break; |
| } |
| return SDOperand(0,0); |
| } |
| |
| std::vector<unsigned> TargetLowering:: |
| getRegClassForInlineAsmConstraint(const std::string &Constraint, |
| MVT::ValueType VT) const { |
| return std::vector<unsigned>(); |
| } |
| |
| |
| std::pair<unsigned, const TargetRegisterClass*> TargetLowering:: |
| getRegForInlineAsmConstraint(const std::string &Constraint, |
| MVT::ValueType VT) const { |
| if (Constraint[0] != '{') |
| return std::pair<unsigned, const TargetRegisterClass*>(0, 0); |
| assert(*(Constraint.end()-1) == '}' && "Not a brace enclosed constraint?"); |
| |
| // Remove the braces from around the name. |
| std::string RegName(Constraint.begin()+1, Constraint.end()-1); |
| |
| // Figure out which register class contains this reg. |
| const MRegisterInfo *RI = TM.getRegisterInfo(); |
| for (MRegisterInfo::regclass_iterator RCI = RI->regclass_begin(), |
| E = RI->regclass_end(); RCI != E; ++RCI) { |
| const TargetRegisterClass *RC = *RCI; |
| |
| // If none of the the value types for this register class are valid, we |
| // can't use it. For example, 64-bit reg classes on 32-bit targets. |
| bool isLegal = false; |
| for (TargetRegisterClass::vt_iterator I = RC->vt_begin(), E = RC->vt_end(); |
| I != E; ++I) { |
| if (isTypeLegal(*I)) { |
| isLegal = true; |
| break; |
| } |
| } |
| |
| if (!isLegal) continue; |
| |
| for (TargetRegisterClass::iterator I = RC->begin(), E = RC->end(); |
| I != E; ++I) { |
| if (StringsEqualNoCase(RegName, RI->get(*I).Name)) |
| return std::make_pair(*I, RC); |
| } |
| } |
| |
| return std::pair<unsigned, const TargetRegisterClass*>(0, 0); |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Loop Strength Reduction hooks |
| //===----------------------------------------------------------------------===// |
| |
| /// isLegalAddressExpression - Return true if the binary expression made up of |
| /// specified opcode, operands, and type can be folded into target addressing |
| /// mode for load / store of the given type. |
| bool TargetLowering::isLegalAddressExpression(unsigned Opc, Value *Op0, |
| Value *Op1, const Type *Ty) const { |
| return false; |
| } |
| |
| /// isLegalAddressImmediate - Return true if the integer value can be used as |
| /// the offset of the target addressing mode for load / store of the given |
| /// type. |
| bool TargetLowering::isLegalAddressImmediate(int64_t V, const Type *Ty) const { |
| return false; |
| } |
| |
| /// isLegalAddressImmediate - Return true if the GlobalValue can be used as |
| /// the offset of the target addressing mode. |
| bool TargetLowering::isLegalAddressImmediate(GlobalValue *GV) const { |
| return false; |
| } |
| |
| /// isLegalAddressScale - Return true if the integer value can be used as the |
| /// scale of the target addressing mode for load / store of the given type. |
| bool TargetLowering::isLegalAddressScale(int64_t S, const Type *Ty) const { |
| return false; |
| } |
| |
| /// isLegalAddressScaleAndImm - Return true if S works for IsLegalAddressScale |
| /// and V works for isLegalAddressImmediate _and_ both can be applied |
| /// simultaneously to the same instruction. |
| bool TargetLowering::isLegalAddressScaleAndImm(int64_t S, int64_t V, |
| const Type* Ty) const { |
| return false; |
| } |
| |
| /// isLegalAddressScaleAndImm - Return true if S works for IsLegalAddressScale |
| /// and GV works for isLegalAddressImmediate _and_ both can be applied |
| /// simultaneously to the same instruction. |
| bool TargetLowering::isLegalAddressScaleAndImm(int64_t S, GlobalValue *GV, |
| const Type* Ty) const { |
| |
| return false; |
| } |
| |
| // Magic for divide replacement |
| |
| struct ms { |
| int64_t m; // magic number |
| int64_t s; // shift amount |
| }; |
| |
| struct mu { |
| uint64_t m; // magic number |
| int64_t a; // add indicator |
| int64_t s; // shift amount |
| }; |
| |
| /// magic - calculate the magic numbers required to codegen an integer sdiv as |
| /// a sequence of multiply and shifts. Requires that the divisor not be 0, 1, |
| /// or -1. |
| static ms magic32(int32_t d) { |
| int32_t p; |
| uint32_t ad, anc, delta, q1, r1, q2, r2, t; |
| const uint32_t two31 = 0x80000000U; |
| struct ms mag; |
| |
| ad = abs(d); |
| t = two31 + ((uint32_t)d >> 31); |
| anc = t - 1 - t%ad; // absolute value of nc |
| p = 31; // initialize p |
| q1 = two31/anc; // initialize q1 = 2p/abs(nc) |
| r1 = two31 - q1*anc; // initialize r1 = rem(2p,abs(nc)) |
| q2 = two31/ad; // initialize q2 = 2p/abs(d) |
| r2 = two31 - q2*ad; // initialize r2 = rem(2p,abs(d)) |
| do { |
| p = p + 1; |
| q1 = 2*q1; // update q1 = 2p/abs(nc) |
| r1 = 2*r1; // update r1 = rem(2p/abs(nc)) |
| if (r1 >= anc) { // must be unsigned comparison |
| q1 = q1 + 1; |
| r1 = r1 - anc; |
| } |
| q2 = 2*q2; // update q2 = 2p/abs(d) |
| r2 = 2*r2; // update r2 = rem(2p/abs(d)) |
| if (r2 >= ad) { // must be unsigned comparison |
| q2 = q2 + 1; |
| r2 = r2 - ad; |
| } |
| delta = ad - r2; |
| } while (q1 < delta || (q1 == delta && r1 == 0)); |
| |
| mag.m = (int32_t)(q2 + 1); // make sure to sign extend |
| if (d < 0) mag.m = -mag.m; // resulting magic number |
| mag.s = p - 32; // resulting shift |
| return mag; |
| } |
| |
| /// magicu - calculate the magic numbers required to codegen an integer udiv as |
| /// a sequence of multiply, add and shifts. Requires that the divisor not be 0. |
| static mu magicu32(uint32_t d) { |
| int32_t p; |
| uint32_t nc, delta, q1, r1, q2, r2; |
| struct mu magu; |
| magu.a = 0; // initialize "add" indicator |
| nc = - 1 - (-d)%d; |
| p = 31; // initialize p |
| q1 = 0x80000000/nc; // initialize q1 = 2p/nc |
| r1 = 0x80000000 - q1*nc; // initialize r1 = rem(2p,nc) |
| q2 = 0x7FFFFFFF/d; // initialize q2 = (2p-1)/d |
| r2 = 0x7FFFFFFF - q2*d; // initialize r2 = rem((2p-1),d) |
| do { |
| p = p + 1; |
| if (r1 >= nc - r1 ) { |
| q1 = 2*q1 + 1; // update q1 |
| r1 = 2*r1 - nc; // update r1 |
| } |
| else { |
| q1 = 2*q1; // update q1 |
| r1 = 2*r1; // update r1 |
| } |
| if (r2 + 1 >= d - r2) { |
| if (q2 >= 0x7FFFFFFF) magu.a = 1; |
| q2 = 2*q2 + 1; // update q2 |
| r2 = 2*r2 + 1 - d; // update r2 |
| } |
| else { |
| if (q2 >= 0x80000000) magu.a = 1; |
| q2 = 2*q2; // update q2 |
| r2 = 2*r2 + 1; // update r2 |
| } |
| delta = d - 1 - r2; |
| } while (p < 64 && (q1 < delta || (q1 == delta && r1 == 0))); |
| magu.m = q2 + 1; // resulting magic number |
| magu.s = p - 32; // resulting shift |
| return magu; |
| } |
| |
| /// magic - calculate the magic numbers required to codegen an integer sdiv as |
| /// a sequence of multiply and shifts. Requires that the divisor not be 0, 1, |
| /// or -1. |
| static ms magic64(int64_t d) { |
| int64_t p; |
| uint64_t ad, anc, delta, q1, r1, q2, r2, t; |
| const uint64_t two63 = 9223372036854775808ULL; // 2^63 |
| struct ms mag; |
| |
| ad = d >= 0 ? d : -d; |
| t = two63 + ((uint64_t)d >> 63); |
| anc = t - 1 - t%ad; // absolute value of nc |
| p = 63; // initialize p |
| q1 = two63/anc; // initialize q1 = 2p/abs(nc) |
| r1 = two63 - q1*anc; // initialize r1 = rem(2p,abs(nc)) |
| q2 = two63/ad; // initialize q2 = 2p/abs(d) |
| r2 = two63 - q2*ad; // initialize r2 = rem(2p,abs(d)) |
| do { |
| p = p + 1; |
| q1 = 2*q1; // update q1 = 2p/abs(nc) |
| r1 = 2*r1; // update r1 = rem(2p/abs(nc)) |
| if (r1 >= anc) { // must be unsigned comparison |
| q1 = q1 + 1; |
| r1 = r1 - anc; |
| } |
| q2 = 2*q2; // update q2 = 2p/abs(d) |
| r2 = 2*r2; // update r2 = rem(2p/abs(d)) |
| if (r2 >= ad) { // must be unsigned comparison |
| q2 = q2 + 1; |
| r2 = r2 - ad; |
| } |
| delta = ad - r2; |
| } while (q1 < delta || (q1 == delta && r1 == 0)); |
| |
| mag.m = q2 + 1; |
| if (d < 0) mag.m = -mag.m; // resulting magic number |
| mag.s = p - 64; // resulting shift |
| return mag; |
| } |
| |
| /// magicu - calculate the magic numbers required to codegen an integer udiv as |
| /// a sequence of multiply, add and shifts. Requires that the divisor not be 0. |
| static mu magicu64(uint64_t d) |
| { |
| int64_t p; |
| uint64_t nc, delta, q1, r1, q2, r2; |
| struct mu magu; |
| magu.a = 0; // initialize "add" indicator |
| nc = - 1 - (-d)%d; |
| p = 63; // initialize p |
| q1 = 0x8000000000000000ull/nc; // initialize q1 = 2p/nc |
| r1 = 0x8000000000000000ull - q1*nc; // initialize r1 = rem(2p,nc) |
| q2 = 0x7FFFFFFFFFFFFFFFull/d; // initialize q2 = (2p-1)/d |
| r2 = 0x7FFFFFFFFFFFFFFFull - q2*d; // initialize r2 = rem((2p-1),d) |
| do { |
| p = p + 1; |
| if (r1 >= nc - r1 ) { |
| q1 = 2*q1 + 1; // update q1 |
| r1 = 2*r1 - nc; // update r1 |
| } |
| else { |
| q1 = 2*q1; // update q1 |
| r1 = 2*r1; // update r1 |
| } |
| if (r2 + 1 >= d - r2) { |
| if (q2 >= 0x7FFFFFFFFFFFFFFFull) magu.a = 1; |
| q2 = 2*q2 + 1; // update q2 |
| r2 = 2*r2 + 1 - d; // update r2 |
| } |
| else { |
| if (q2 >= 0x8000000000000000ull) magu.a = 1; |
| q2 = 2*q2; // update q2 |
| r2 = 2*r2 + 1; // update r2 |
| } |
| delta = d - 1 - r2; |
| } while (p < 128 && (q1 < delta || (q1 == delta && r1 == 0))); |
| magu.m = q2 + 1; // resulting magic number |
| magu.s = p - 64; // resulting shift |
| return magu; |
| } |
| |
| /// BuildSDIVSequence - Given an ISD::SDIV node expressing a divide by constant, |
| /// return a DAG expression to select that will generate the same value by |
| /// multiplying by a magic number. See: |
| /// <http://the.wall.riscom.net/books/proc/ppc/cwg/code2.html> |
| SDOperand TargetLowering::BuildSDIV(SDNode *N, SelectionDAG &DAG, |
| std::vector<SDNode*>* Created) const { |
| MVT::ValueType VT = N->getValueType(0); |
| |
| // Check to see if we can do this. |
| if (!isTypeLegal(VT) || (VT != MVT::i32 && VT != MVT::i64)) |
| return SDOperand(); // BuildSDIV only operates on i32 or i64 |
| if (!isOperationLegal(ISD::MULHS, VT)) |
| return SDOperand(); // Make sure the target supports MULHS. |
| |
| int64_t d = cast<ConstantSDNode>(N->getOperand(1))->getSignExtended(); |
| ms magics = (VT == MVT::i32) ? magic32(d) : magic64(d); |
| |
| // Multiply the numerator (operand 0) by the magic value |
| SDOperand Q = DAG.getNode(ISD::MULHS, VT, N->getOperand(0), |
| DAG.getConstant(magics.m, VT)); |
| // If d > 0 and m < 0, add the numerator |
| if (d > 0 && magics.m < 0) { |
| Q = DAG.getNode(ISD::ADD, VT, Q, N->getOperand(0)); |
| if (Created) |
| Created->push_back(Q.Val); |
| } |
| // If d < 0 and m > 0, subtract the numerator. |
| if (d < 0 && magics.m > 0) { |
| Q = DAG.getNode(ISD::SUB, VT, Q, N->getOperand(0)); |
| if (Created) |
| Created->push_back(Q.Val); |
| } |
| // Shift right algebraic if shift value is nonzero |
| if (magics.s > 0) { |
| Q = DAG.getNode(ISD::SRA, VT, Q, |
| DAG.getConstant(magics.s, getShiftAmountTy())); |
| if (Created) |
| Created->push_back(Q.Val); |
| } |
| // Extract the sign bit and add it to the quotient |
| SDOperand T = |
| DAG.getNode(ISD::SRL, VT, Q, DAG.getConstant(MVT::getSizeInBits(VT)-1, |
| getShiftAmountTy())); |
| if (Created) |
| Created->push_back(T.Val); |
| return DAG.getNode(ISD::ADD, VT, Q, T); |
| } |
| |
| /// BuildUDIVSequence - Given an ISD::UDIV node expressing a divide by constant, |
| /// return a DAG expression to select that will generate the same value by |
| /// multiplying by a magic number. See: |
| /// <http://the.wall.riscom.net/books/proc/ppc/cwg/code2.html> |
| SDOperand TargetLowering::BuildUDIV(SDNode *N, SelectionDAG &DAG, |
| std::vector<SDNode*>* Created) const { |
| MVT::ValueType VT = N->getValueType(0); |
| |
| // Check to see if we can do this. |
| if (!isTypeLegal(VT) || (VT != MVT::i32 && VT != MVT::i64)) |
| return SDOperand(); // BuildUDIV only operates on i32 or i64 |
| if (!isOperationLegal(ISD::MULHU, VT)) |
| return SDOperand(); // Make sure the target supports MULHU. |
| |
| uint64_t d = cast<ConstantSDNode>(N->getOperand(1))->getValue(); |
| mu magics = (VT == MVT::i32) ? magicu32(d) : magicu64(d); |
| |
| // Multiply the numerator (operand 0) by the magic value |
| SDOperand Q = DAG.getNode(ISD::MULHU, VT, N->getOperand(0), |
| DAG.getConstant(magics.m, VT)); |
| if (Created) |
| Created->push_back(Q.Val); |
| |
| if (magics.a == 0) { |
| return DAG.getNode(ISD::SRL, VT, Q, |
| DAG.getConstant(magics.s, getShiftAmountTy())); |
| } else { |
| SDOperand NPQ = DAG.getNode(ISD::SUB, VT, N->getOperand(0), Q); |
| if (Created) |
| Created->push_back(NPQ.Val); |
| NPQ = DAG.getNode(ISD::SRL, VT, NPQ, |
| DAG.getConstant(1, getShiftAmountTy())); |
| if (Created) |
| Created->push_back(NPQ.Val); |
| NPQ = DAG.getNode(ISD::ADD, VT, NPQ, Q); |
| if (Created) |
| Created->push_back(NPQ.Val); |
| return DAG.getNode(ISD::SRL, VT, NPQ, |
| DAG.getConstant(magics.s-1, getShiftAmountTy())); |
| } |
| } |
| |
| MVT::ValueType TargetLowering::getValueType(const Type *Ty) const { |
| switch (Ty->getTypeID()) { |
| default: assert(0 && "Unknown type!"); |
| case Type::VoidTyID: return MVT::isVoid; |
| case Type::IntegerTyID: |
| switch (cast<IntegerType>(Ty)->getBitWidth()) { |
| default: assert(0 && "Invalid width for value type"); |
| case 1: return MVT::i1; |
| case 8: return MVT::i8; |
| case 16: return MVT::i16; |
| case 32: return MVT::i32; |
| case 64: return MVT::i64; |
| case 128: return MVT::i128; |
| } |
| break; |
| case Type::FloatTyID: return MVT::f32; |
| case Type::DoubleTyID: return MVT::f64; |
| case Type::PointerTyID: return PointerTy; |
| case Type::VectorTyID: return MVT::Vector; |
| } |
| } |