utils/NightlyTest.pl

#!/usr/dcs/software/supported/bin/perl -w
#
# Program:  NightlyTest.pl
#
# Synopsis: Perform a series of tests which are designed to be run nightly.
#           This is used to keep track of the status of the LLVM tree, tracking
#           regressions and performance changes.  This generates one web page a
#           day which can be used to access this information.
#
# Syntax:   NightlyTest.pl [OPTIONS] [CVSROOT BUILDDIR WEBDIR]
#   where
# OPTIONS may include one or more of the following:
#  -nocheckout      Do not create, checkout, update, or configure
#                   the source tree.
#  -noremove        Do not remove the BUILDDIR after it has been built.
#  -notest          Do not even attempt to run the test programs. Implies
#                   -norunningtests.
#  -norunningtests  Do not run the Olden benchmark suite with
#                   LARGE_PROBLEM_SIZE enabled.
#  -parallel        Run two parallel jobs with GNU Make.
# CVSROOT is the CVS repository from which the tree will be checked out,
#  specified either in the full :method:user@host:/dir syntax, or
#  just /dir if using a local repo.
# BUILDDIR is the directory where sources for this test run will be checked out
#  AND objects for this test run will be built. This directory MUST NOT
#  exist before the script is run; it will be created by the cvs checkout
#  process and erased (unless -noremove is specified; see above.)
# WEBDIR is the directory into which the test results web page will be written,
#  AND in which the "index.html" is assumed to be a symlink to the most recent
#  copy of the results. This directory MUST exist before the script is run.
#
use POSIX qw(strftime);

my $HOME = $ENV{'HOME'};
my $CVSRootDir = $ENV{'CVSROOT'};
my $CVSRootDir = "/home/vadve/vadve/Research/DynOpt/CVSRepository"
    unless $CVSRootDir;
my $BuildDir   = "$HOME/buildtest";
my $WebDir     = "$HOME/cvs/testresults-X86";

# Calculate the date prefix...
@TIME = localtime;
my $DATE = sprintf "%4d-%02d-%02d", $TIME[5]+1900, $TIME[4]+1, $TIME[3];
my $DateString = strftime "%B %d, %Y", localtime;

sub ReadFile {
  undef $/;
  if (open (FILE, $_[0])) {
    my $Ret = <FILE>;
    close FILE;
    return $Ret;
  } else {
    print "Could not open file '$_[0]' for reading!";
    return "";
  }
}

sub WriteFile {  # (filename, contents)
  open (FILE, ">$_[0]") or die "Could not open file '$_[0]' for writing!";
  print FILE $_[1];
  close FILE;
}

sub GetRegex {   # (Regex with ()'s, value)
  $_[1] =~ /$_[0]/m;
  if (defined($1)) {
    return $1;
  }
  return "?";
}

sub AddPreTag {  # Add pre tags around nonempty list, or convert to "none"
  $_ = shift;
  if (length) { return "<ul><pre>$_</pre></ul>"; } else { "<b>none</b><br>"; }
}

sub GetDir {
  my $Suffix = shift;
  opendir DH, $WebDir;
  my @Result = reverse sort grep !/$DATE/, grep /[-0-9]+$Suffix/, readdir DH;
  closedir DH;
  return @Result;
}

# DiffFiles - Diff the current version of the file against the last version of
# the file, reporting things added and removed.  This is used to report, for
# example, added and removed warnings.  This returns a pair (added, removed)
#
sub DiffFiles {
  my $Suffix = shift;
  my @Others = GetDir $Suffix;
  if (@Others == 0) {  # No other files?  We added all entries...
    return (`cat $WebDir/$DATE$Suffix`, "");
  }
  # Diff the files now...
  my @Diffs = split "\n", `diff $WebDir/$DATE$Suffix $WebDir/$Others[0]`;
  my $Added   = join "\n", grep /^</, @Diffs;
  my $Removed = join "\n", grep /^>/, @Diffs;
  $Added =~ s/^< //gm;
  $Removed =~ s/^> //gm;
  return ($Added, $Removed);
}

# FormatTime - Convert a time from 1m23.45 into 83.45
sub FormatTime {
  my $Time = shift;
  if ($Time =~ m/([0-9]+)m([0-9.]+)/) {
    $Time = sprintf("%7.4f", $1*60.0+$2);
  }
  return $Time;
}


# Command line argument settings...
my $NOCHECKOUT = 0;
my $NOREMOVE   = 0;
my $NOTEST     = 0;
my $NORUNNINGTESTS = 0;
my $MAKEOPTS   = "";


# Parse arguments...
while (scalar(@ARGV) and ($_ = $ARGV[0], /^[-+]/)) {
  shift;
  last if /^--$/;  # Stop processing arguments on --

  # List command line options here...
  if (/^-nocheckout$/)     { $NOCHECKOUT = 1; next; }
  if (/^-noremove$/)       { $NOREMOVE   = 1; next; }
  if (/^-notest$/)         { $NOTEST     = 1; $NORUNNINGTESTS = 1; next; }
  if (/^-norunningtests$/) { $NORUNNINGTESTS = 1; next; }
  if (/^-parallel$/)       { $MAKEOPTS   = "-j2 -l3.0"; next; }

  print "Unknown option: $_ : ignoring!\n";
}

die "Must specify 0 or 3 options!" if (@ARGV != 0 and @ARGV != 3);

if (@ARGV == 3) {
  $CVSRootDir = $ARGV[0];
  $BuildDir   = $ARGV[1];
  $WebDir     = $ARGV[2];
}

my $Template = "$BuildDir/llvm/utils/NightlyTestTemplate.html";
my $Prefix = "$WebDir/$DATE";

if (0) {
  print "CVS Root = $CVSRootDir\n";
  print "BuildDir = $BuildDir\n";
  print "WebDir   = $WebDir\n";
  print "Prefix   = $Prefix\n";
}


#
# Create the CVS repository directory
#
if (!$NOCHECKOUT) {
  mkdir $BuildDir or die "Could not create CVS checkout directory $BuildDir!";
}
chdir $BuildDir or die "Could not change to CVS checkout directory $BuildDir!";


#
# Check out the llvm tree, saving CVS messages to the cvs log...
#
$CVSOPT = "";
$CVSOPT = "-z3" if $CVSRootDir =~ /^:ext:/; # Use compression if going over ssh.
system "(time -p cvs $CVSOPT -d $CVSRootDir co llvm) > $Prefix-CVS-Log.txt 2>&1"
  if (!$NOCHECKOUT);

chdir "llvm" or die "Could not change into llvm directory!";

system "cvs up -P -d > /dev/null 2>&1" if (!$NOCHECKOUT);

# Read in the HTML template file...
my $TemplateContents = ReadFile $Template;


#
# Get some static statistics about the current state of CVS
#
my $CVSCheckoutTime = GetRegex "([0-9.]+)", `grep '^real' $Prefix-CVS-Log.txt`;
my $NumFilesInCVS = `grep '^U' $Prefix-CVS-Log.txt | wc -l` + 0;
my $NumDirsInCVS  = `grep '^cvs checkout' $Prefix-CVS-Log.txt | wc -l` + 0;
$LOC = GetRegex "([0-9]+) +total", `wc -l \`utils/getsrcs.sh\` | grep total`;

#
# Build the entire tree, saving build messages to the build log
#
if (!$NOCHECKOUT) {
  system "(time -p ./configure --enable-jit --enable-spec --with-objroot=.) > $Prefix-Build-Log.txt 2>&1";

  # Build the entire tree, capturing the output into $Prefix-Build-Log.txt
  system "(time -p gmake $MAKEOPTS) >> $Prefix-Build-Log.txt 2>&1";
}


sub GetRegexNum {
  my ($Regex, $Num, $Regex2, $File) = @_;
  my @Items = split "\n", `grep '$Regex' $File`;
  return GetRegex $Regex2, $Items[$Num];
}

#
# Get some statistics about the build...
#
my @Linked = split '\n', `grep Linking $Prefix-Build-Log.txt`;
my $NumExecutables = scalar(grep(/executable/, @Linked));
my $NumLibraries   = scalar(grep(!/executable/, @Linked));
my $NumObjects     = `grep '^Compiling' $Prefix-Build-Log.txt | wc -l` + 0;

my $ConfigTimeU = GetRegexNum "^user", 0, "([0-9.]+)", "$Prefix-Build-Log.txt";
my $ConfigTimeS = GetRegexNum "^sys", 0, "([0-9.]+)", "$Prefix-Build-Log.txt";
my $ConfigTime  = $ConfigTimeU+$ConfigTimeS;  # ConfigTime = User+System
my $ConfigWallTime = GetRegexNum "^real", 0,"([0-9.]+)","$Prefix-Build-Log.txt";

my $BuildTimeU = GetRegexNum "^user", 1, "([0-9.]+)", "$Prefix-Build-Log.txt";
my $BuildTimeS = GetRegexNum "^sys", 1, "([0-9.]+)", "$Prefix-Build-Log.txt";
my $BuildTime  = $BuildTimeU+$BuildTimeS;  # BuildTime = User+System
my $BuildWallTime = GetRegexNum "^real", 1, "([0-9.]+)","$Prefix-Build-Log.txt";

my $BuildError = "";
if (`grep '^gmake[^:]*: .*Error' $Prefix-Build-Log.txt | wc -l` + 0 ||
    `grep '^gmake: \*\*\*.*Stop.' $Prefix-Build-Log.txt | wc -l`+0) {
  $BuildError = "<h3><font color='red'>Build error: compilation " .
                "<a href=\"$DATE-Build-Log.txt\">aborted</a></font></h3>";
}

#
# Get warnings from the build
#
my @Warn = split "\n", `egrep 'warning:|Entering dir' $Prefix-Build-Log.txt`;
my @Warnings;
my $CurDir = "";

foreach $Warning (@Warn) {
  if ($Warning =~ m/Entering directory \`([^\`]+)\'/) {
    $CurDir = $1;                 # Keep track of directory warning is in...
    if ($CurDir =~ m#$BuildDir/llvm/(.*)#) { # Remove buildir prefix if included
      $CurDir = $1;
    }
  } else {
    push @Warnings, "$CurDir/$Warning";     # Add directory to warning...
  }
}
my $WarningsFile =  join "\n", @Warnings;
my $WarningsList = AddPreTag $WarningsFile;
$WarningsFile =~ s/:[0-9]+:/::/g;

# Emit the warnings file, so we can diff...
WriteFile "$WebDir/$DATE-Warnings.txt", $WarningsFile . "\n";
my ($WarningsAdded, $WarningsRemoved) = DiffFiles "-Warnings.txt";
$WarningsAdded = AddPreTag $WarningsAdded;
$WarningsRemoved = AddPreTag $WarningsRemoved;


#
# Get some statistics about CVS commits over the current day...
#
@CVSHistory = split "\n", `cvs history -D '1 day ago' -a -xAMROCGUW`;
#print join "\n", @CVSHistory; print "\n";

# Extract some information from the CVS history... use a hash so no duplicate
# stuff is stored.
my (%AddedFiles, %ModifiedFiles, %RemovedFiles, %UsersCommitted, %UsersUpdated);

my $DateRE = "[-:0-9 ]+\\+[0-9]+";

# Loop over every record from the CVS history, filling in the hashes.
foreach $File (@CVSHistory) {
  my ($Type, $Date, $UID, $Rev, $Filename);
  if ($File =~ /([AMRUGC]) ($DateRE) ([^ ]+) +([^ ]+) +([^ ]+) +([^ ]+)/) {
    ($Type, $Date, $UID, $Rev, $Filename) = ($1, $2, $3, $4, "$6/$5");
  } elsif ($File =~ /([W]) ($DateRE) ([^ ]+) +([^ ]+) +([^ ]+)/) {
    ($Type, $Date, $UID, $Rev, $Filename) = ($1, $2, $3, $4, "$6/$5");
  } elsif ($File =~ /([O]) ($DateRE) ([^ ]+) +([^ ]+)/) {
    ($Type, $Date, $UID, $Rev, $Filename) = ($1, $2, $3, "", "$4/");
  } else {
    print "UNMATCHABLE: $File\n";
  }
  # print "$File\nTy = $Type Date = '$Date' UID=$UID Rev=$Rev File = '$Filename'\n";

  if ($Filename =~ /^llvm/) {
    if ($Type eq 'M') {        # Modified
      $ModifiedFiles{$Filename} = 1;
      $UsersCommitted{$UID} = 1;
    } elsif ($Type eq 'A') {   # Added
      $AddedFiles{$Filename} = 1;
      $UsersCommitted{$UID} = 1;
    } elsif ($Type eq 'R') {   # Removed
      $RemovedFiles{$Filename} = 1;
      $UsersCommitted{$UID} = 1;
    } else {
      $UsersUpdated{$UID} = 1;
    }
  }
}

my $UserCommitList = join "\n", keys %UsersCommitted;
my $UserUpdateList = join "\n", keys %UsersUpdated;
my $AddedFilesList = AddPreTag join "\n", sort keys %AddedFiles;
my $ModifiedFilesList = AddPreTag join "\n", sort keys %ModifiedFiles;
my $RemovedFilesList = AddPreTag join "\n", sort keys %RemovedFiles;

my $TestError = 1;
my $SingleSourceProgramsTable;
my $MultiSourceProgramsTable;
my $ExternalProgramsTable;


sub TestDirectory {
  my $SubDir = shift;

  chdir "test/Programs/$SubDir" or
    die "Could not change into test/Programs/$SubDir testdir!";

  # Run the programs tests... creating a report.nightly.html file
  if (!$NOTEST) {
    system "gmake $MAKEOPTS report.nightly.html TEST=nightly "
         . "> $Prefix-$SubDir-ProgramTest.txt 2>&1";
  } else {
    system "gunzip $Prefix-$SubDir-ProgramTest.txt.gz";
  }

  my $ProgramsTable;
  if (`grep '^gmake[^:]: .*Error' $Prefix-$SubDir-ProgramTest.txt | wc -l` + 0){
    $TestError = 1;
    $ProgramsTable = "<font color=white><h2>Error running tests!</h2></font>";
  } elsif (`grep '^gmake[^:]: .*No rule to make target' $Prefix-$SubDir-ProgramTest.txt | wc -l` + 0) {
    $TestError = 1;
    $ProgramsTable =
      "<font color=white><h2>Makefile error running tests!</h2></font>";
  } else {
    $TestError = 0;
    $ProgramsTable = ReadFile "report.nightly.html";

    #
    # Create a list of the tests which were run...
    #
    system "egrep 'TEST-(PASS|FAIL)' < $Prefix-$SubDir-ProgramTest.txt "
         . "| sort > $Prefix-$SubDir-Tests.txt";
  }

  # Compress the test output
  system "gzip -f $Prefix-$SubDir-ProgramTest.txt";
  chdir "../../.." or die "Cannot return to parent directory!";
  return $ProgramsTable;
}

# If we build the tree successfully, run the nightly programs tests...
if ($BuildError eq "") {
  $SingleSourceProgramsTable = TestDirectory("SingleSource");
  $MultiSourceProgramsTable = TestDirectory("MultiSource");
  $ExternalProgramsTable = TestDirectory("External");
  system "cat $Prefix-SingleSource-Tests.txt $Prefix-MultiSource-Tests.txt ".
         " $Prefix-External-Tests.txt | sort > $Prefix-Tests.txt";
}

my ($TestsAdded, $TestsRemoved, $TestsFixed, $TestsBroken) = ("","","","");

if ($TestError) {
  $TestsAdded   = "<b>error testing</b><br>";
  $TestsRemoved = "<b>error testing</b><br>";
  $TestsFixed   = "<b>error testing</b><br>";
  $TestsBroken  = "<b>error testing</b><br>";
} else {
  my ($RTestsAdded, $RTestsRemoved) = DiffFiles "-Tests.txt";

  my @RawTestsAddedArray = split '\n', $RTestsAdded;
  my @RawTestsRemovedArray = split '\n', $RTestsRemoved;

  my %OldTests = map {GetRegex('TEST-....: (.+)', $_)=>$_}
    @RawTestsRemovedArray;
  my %NewTests = map {GetRegex('TEST-....: (.+)', $_)=>$_}
    @RawTestsAddedArray;

  foreach $Test (keys %NewTests) {
    if (!exists $OldTests{$Test}) {  # TestAdded if in New but not old
      $TestsAdded = "$TestsAdded$Test\n";
    } else {
      if ($OldTests{$Test} =~ /TEST-PASS/) {  # Was the old one a pass?
        $TestsBroken = "$TestsBroken$Test\n";  # New one must be a failure
      } else {
        $TestsFixed = "$TestsFixed$Test\n";    # No, new one is a pass.
      }
    }
  }
  foreach $Test (keys %OldTests) {  # TestRemoved if in Old but not New
    $TestsRemoved = "$TestsRemoved$Test\n" if (!exists $NewTests{$Test});
  }

  $TestsAdded   = AddPreTag $TestsAdded;
  $TestsRemoved = AddPreTag $TestsRemoved;
  $TestsFixed   = AddPreTag $TestsFixed;
  $TestsBroken  = AddPreTag $TestsBroken;
}

# If we built the tree successfully, runs of the Olden suite with
# LARGE_PROBLEM_SIZE on so that we can get some "running" statistics.
if ($BuildError eq "") {
  my ($NATTime, $CBETime, $LLCTime, $JITTime, $OptTime, $BytecodeSize,
      $MachCodeSize) = ("","","","","","","");
  if (!$NORUNNINGTESTS) {
    chdir "test/Programs/MultiSource/Benchmarks/Olden" or die "Olden tests moved?";

    # Clean out previous results...
    system "gmake $MAKEOPTS clean > /dev/null 2>&1";

    # Run the nightly test in this directory, with LARGE_PROBLEM_SIZE enabled!
    system "gmake $MAKEOPTS report.nightly.raw.out TEST=nightly " .
           " LARGE_PROBLEM_SIZE=1 > /dev/null 2>&1";
    system "cp report.nightly.raw.out $Prefix-Olden-tests.txt";
  } else {
    system "gunzip $Prefix-Olden-tests.txt.gz";
  }

  # Now we know we have $Prefix-Olden-tests.txt as the raw output file.  Split
  # it up into records and read the useful information.
  my @Records = split />>> ========= /, ReadFile "$Prefix-Olden-tests.txt";
  shift @Records;  # Delete the first (garbage) record

  # Loop over all of the records, summarizing them into rows for the running
  # totals file.
  my $WallTimeRE = "[A-Za-z0-9.: ]+\\(([0-9.]+) wall clock";
  foreach $Rec (@Records) {
    my $rNATTime = GetRegex 'TEST-RESULT-nat-time: real\s*([.0-9m]+)', $Rec;
    my $rCBETime = GetRegex 'TEST-RESULT-cbe-time: real\s*([.0-9m]+)', $Rec;
    my $rLLCTime = GetRegex 'TEST-RESULT-llc-time: real\s*([.0-9m]+)', $Rec;
    my $rJITTime = GetRegex 'TEST-RESULT-jit-time: real\s*([.0-9m]+)', $Rec;
    my $rOptTime = GetRegex "TEST-RESULT-compile: $WallTimeRE", $Rec;
    my $rBytecodeSize = GetRegex 'TEST-RESULT-compile: *([0-9]+)', $Rec;
    my $rMachCodeSize = GetRegex 'TEST-RESULT-jit-machcode: *([0-9]+).*bytes of machine code', $Rec;

    $NATTime .= " " . FormatTime($rNATTime);
    $CBETime .= " " . FormatTime($rCBETime);
    $LLCTime .= " " . FormatTime($rLLCTime);
    $JITTime .= " " . FormatTime($rJITTime);
    $OptTime .= " $rOptTime";
    $BytecodeSize .= " $rBytecodeSize";
    $MachCodeSize .= " $rMachCodeSize";
  }

  # Now that we have all of the numbers we want, add them to the running totals
  # files.
  AddRecord($NATTime, "running_Olden_nat_time.txt");
  AddRecord($CBETime, "running_Olden_cbe_time.txt");
  AddRecord($LLCTime, "running_Olden_llc_time.txt");
  AddRecord($JITTime, "running_Olden_jit_time.txt");
  AddRecord($OptTime, "running_Olden_opt_time.txt");
  AddRecord($BytecodeSize, "running_Olden_bytecode.txt");
  AddRecord($MachCodeSize, "running_Olden_machcode.txt");

  system "gzip -f $Prefix-Olden-tests.txt";
}




#
# Get a list of the previous days that we can link to...
#
my @PrevDays = map {s/.html//; $_} GetDir ".html";

splice @PrevDays, 20;  # Trim down list to something reasonable...

my $PrevDaysList =     # Format list for sidebar
  join "\n  ", map { "<a href=\"$_.html\">$_</a><br>" } @PrevDays;

#
# Start outputing files into the web directory
#
chdir $WebDir or die "Could not change into web directory!";

# Add information to the files which accumulate information for graphs...
AddRecord($LOC, "running_loc.txt");
AddRecord($BuildTime, "running_build_time.txt");

#
# Rebuild the graphs now...
#
$GNUPLOT = "/usr/dcs/software/supported/bin/gnuplot";
$GNUPLOT = "gnuplot" if ! -x $GNUPLOT;
$PlotScriptFilename = "$BuildDir/llvm/utils/NightlyTest.gnuplot";
system ($GNUPLOT, $PlotScriptFilename);

#
# Remove the cvs tree...
#
system "rm -rf $BuildDir" if (!$NOCHECKOUT and !$NOREMOVE);

#
# Print out information...
#
if (0) {
  print "DateString: $DateString\n";
  print "CVS Checkout: $CVSCheckoutTime seconds\n";
  print "Files/Dirs/LOC in CVS: $NumFilesInCVS/$NumDirsInCVS/$LOC\n";

  print "Build Time: $BuildTime seconds\n";
  print "Libraries/Executables/Objects built: $NumLibraries/$NumExecutables/$NumObjects\n";

  print "WARNINGS:\n  $WarningsList\n";

  print "Users committed: $UserCommitList\n";
  print "Added Files: \n  $AddedFilesList\n";
  print "Modified Files: \n  $ModifiedFilesList\n";
  print "Removed Files: \n  $RemovedFilesList\n";

  print "Previous Days =\n  $PrevDaysList\n";
}


#
# Output the files...
#

# Main HTML file...
my $Output;
eval "\$Output = <<ENDOFFILE;$TemplateContents\nENDOFFILE\n";
WriteFile "$DATE.html", $Output;

# Change the index.html symlink...
system "ln -sf $DATE.html index.html";

sub AddRecord {
  my ($Val, $Filename) = @_;
  my @Records;
  if (open FILE, "$WebDir/$Filename") {
    @Records = grep !/$DATE/, split "\n", <FILE>;
    close FILE;
  }
  push @Records, "$DATE: $Val";
  WriteFile "$WebDir/$Filename", (join "\n", @Records) . "\n";
  return @Records;
}