Makefile.config.in

#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
#
#                     The LLVM Compiler Infrastructure
#
# This file was developed by the LLVM research group and is distributed under
# the University of Illinois Open Source License. See LICENSE.TXT for details.
# 
#===------------------------------------------------------------------------===#
#
# This file is included by Makefile.common.  It defines paths and other
# values specific to a particular installation of LLVM.
#
#===------------------------------------------------------------------------===#

# Define LLVM specific info and directories based on the autoconf variables
LLVMPackageName   := @PACKAGE_NAME@
LLVMVersion       := @PACKAGE_VERSION@
LLVM_CONFIGTIME   := @LLVM_CONFIGTIME@

###########################################################################
# Directory Configuration
#	This section of the Makefile determines what is where.  To be
#	specific, there are several locations that need to be defined:
#
#	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
#	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
#
#	o PROJ_SRC_DIR  : The directory containing the code to build.
#	o PROJ_SRC_ROOT : The root directory of the code to build.
#
#	o PROJ_OBJ_DIR  : The directory in which compiled code will be placed.
#	o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
#
###########################################################################

PWD := @BINPWD@
# Set the project name to LLVM if its not defined
ifndef PROJECT_NAME
PROJECT_NAME := $(LLVMPackageName)
endif

PROJ_OBJ_DIR  := $(shell $(PWD))
PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD))

ifeq ($(PROJECT_NAME),llvm)
LLVM_SRC_ROOT   := $(shell cd @abs_top_srcdir@; $(PWD))
LLVM_OBJ_ROOT   := $(shell cd @abs_top_builddir@; $(PWD))
PROJ_SRC_ROOT   := $(shell cd $(LLVM_SRC_ROOT); $(PWD))
PROJ_SRC_DIR    := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
prefix          := @prefix@
PROJ_prefix     := $(prefix)
PROJ_VERSION    := $(LLVMVersion)
else
ifndef PROJ_SRC_ROOT
$(error Projects must define PROJ_SRC_ROOT)
endif
ifndef PROJ_OBJ_ROOT
$(error Projects must define PROJ_OBJ_ROOT)
endif
ifndef PROJ_INSTALL_ROOT
$(error Projects must define PROJ_INSTALL_ROOT)
endif
ifndef LLVM_SRC_ROOT
$(error Projects must define LLVM_SRC_ROOT)
endif
ifndef LLVM_OBJ_ROOT
$(error Projects must define LLVM_OBJ_ROOT)
endif
PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
prefix          := $(PROJ_INSTALL_ROOT)
PROJ_prefix     := $(prefix)
ifndef PROJ_VERSION
PROJ_VERSION := 1.0
endif
endif

PROJ_bindir     := $(DESTDIR)$(PROJ_prefix)/bin
PROJ_libdir     := $(DESTDIR)$(PROJ_prefix)/lib
PROJ_datadir    := $(DESTDIR)$(PROJ_prefix)/share
PROJ_docsdir    := $(DESTDIR)$(PROJ_prefix)/docs/llvm
PROJ_etcdir     := $(DESTDIR)$(PROJ_prefix)/etc/llvm
PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include
PROJ_infodir    := $(DESTDIR)$(PROJ_prefix)/info
PROJ_mandir     := $(DESTDIR)$(PROJ_prefix)/man

# Determine if we're on a unix type operating system
LLVM_ON_UNIX:=@LLVM_ON_UNIX@
LLVM_ON_WIN32:=@LLVM_ON_WIN32@

# Target operating system for which LLVM will be compiled.
OS=@OS@

# Target hardware architecture
ARCH=@ARCH@

# Indicates, whether we're cross-compiling LLVM or not
LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@

# Executable file extension for build platform (mainly for
# tablegen call if we're cross-compiling).
BUILD_EXEEXT=@BUILD_EXEEXT@

# Target triple (cpu-vendor-os) for which we should generate code
TARGET_TRIPLE=@target@

# Targets that we should build
TARGETS_TO_BUILD=@TARGETS_TO_BUILD@

# Extra options to compile LLVM with
EXTRA_OPTIONS=@EXTRA_OPTIONS@

# Endian-ness of the target
ENDIAN=@ENDIAN@

# Path to the C++ compiler to use.  This is an optional setting, which defaults
# to whatever your gmake defaults to.
CXX = @CXX@

# Path to the CC binary, which use used by testcases for native builds.
CC := @CC@

# Linker flags.
LDFLAGS+=@LDFLAGS@

# Path to the library archiver program.
AR_PATH = @AR@

# Path to the nm program
NM_PATH = @NM@

# The pathnames of the programs we require to build
BISON      := @BISON@
CMP        := @CMP@
CP         := @CP@
DATE       := @DATE@
FIND       := @FIND@
FLEX       := @LEX@
GREP       := @GREP@
INSTALL    := @INSTALL@
MKDIR      := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
MV         := @MV@
RANLIB     := @RANLIB@
RM         := @RM@
SED        := @SED@
TAR        := @TAR@
YACC       := @YACC@

# Paths to miscellaneous programs we hope are present but might not be
PERL       := @PERL@ 
BZIP2      := @BZIP2@
DOT        := @DOT@
DOXYGEN    := @DOXYGEN@
ETAGS      := @ETAGS@
ETAGSFLAGS := @ETAGSFLAGS@
GROFF      := @GROFF@
GZIP       := @GZIP@
POD2HTML   := @POD2HTML@
POD2MAN    := @POD2MAN@
RUNTEST    := @RUNTEST@
TCLSH      := @TCLSH@
ZIP        := @ZIP@

HAVE_PERL    := @HAVE_PERL@
HAVE_PTHREAD := @HAVE_PTHREAD@

LIBS       := @LIBS@

# Path to location for LLVM C/C++ front-end. You can modify this if you
# want to override the value set by configure.
LLVMGCCDIR := @LLVMGCCDIR@

# Determine the target for which LLVM should generate code.
ifeq (@LLVMGCC_MAJVERS@,3)
LLVMGCCARCH := @target@/3.4-llvm
else
LLVMGCCARCH := @target@/@LLVMGCC_VERSION@
endif

# Determine the path where the library executables are
LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@

# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
LLVMGCC  := @LLVMGCC@
LLVMGXX  := @LLVMGXX@
LLVMCC1  := @LLVMCC1@
LLVMCC1PLUS := @LLVMCC1PLUS@
LLVMGCC_VERSION := @LLVMGCC_VERSION@
LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@

# Path to directory where object files should be stored during a build.
# Set OBJ_ROOT to "." if you do not want to use a separate place for
# object files.
OBJ_ROOT := .

# These are options that can either be enabled here, or can be enabled on the
# make command line (ie, make ENABLE_PROFILING=1):

# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
# into the "Release" directories. Otherwise, LLVM code is not optimized and 
# output is put in the "Debug" directories.
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@

# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will 
# exclude assertion checks, otherwise they are included.
#DISABLE_ASSERTIONS = 1
@DISABLE_ASSERTIONS@

# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
# symbols.
#DEBUG_RUNTIME = 1
@DEBUG_RUNTIME@

# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
#ENABLE_PROFILING = 1

# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
ENABLE_DOXYGEN = @ENABLE_DOXYGEN@

# Do we want to enable threads?
ENABLE_THREADS := @ENABLE_THREADS@

# Do we want to build with position independent code?
ENABLE_PIC := @ENABLE_PIC@

# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
#VERBOSE = 1

# Enable JIT for this platform
TARGET_HAS_JIT = @TARGET_HAS_JIT@

# Shared library extension for host platform.
SHLIBEXT = @SHLIBEXT@

# Executable file extension for host platform.
EXEEXT = @EXEEXT@

# Things we just assume are "there"
ECHO := echo

# Get the options for causing archives to link all their content instead of
# just missing symbols, and the inverse of that. This is used for certain LLVM
# tools that permit loadable modules. It ensures that the LLVM symbols will be
# available to those loadable modules.
LINKALL := @LINKALL@
NOLINKALL := @NOLINKALL@

# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
# on the check.
HUGE_VAL_SANITY = @HUGE_VAL_SANITY@