| /* |
| * Copyright (c) 2015, Intel Corporation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its contributors |
| * may be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #pragma once |
| |
| #include "SelectionCriterionTypeInterface.h" |
| #include "SelectionCriterionInterface.h" |
| #include "ParameterHandle.h" |
| #include "ParameterMgrLoggerForward.h" |
| |
| #include <string> |
| #include <list> |
| #include <memory> |
| #include <stdint.h> |
| |
| class CParameterMgr; |
| |
| class CParameterMgrFullConnector |
| { |
| friend class CParameterMgrLogger<CParameterMgrFullConnector>; |
| |
| public: |
| CParameterMgrFullConnector(const std::string& strConfigurationFilePath); |
| ~CParameterMgrFullConnector(); |
| |
| class ILogger |
| { |
| public: |
| virtual void log(bool bIsWarning, const std::string& strLog) = 0; |
| protected: |
| virtual ~ILogger() {} |
| }; |
| // Logging |
| /** Should be called before start */ |
| void setLogger(ILogger* pLogger); |
| |
| |
| bool start(std::string& strError); |
| |
| // Dynamic parameter handling |
| CParameterHandle* createParameterHandle(const std::string& strPath, std::string& strError); |
| |
| ISelectionCriterionTypeInterface* createSelectionCriterionType(bool bIsInclusive); |
| ISelectionCriterionInterface* createSelectionCriterion(const std::string& strName, |
| const ISelectionCriterionTypeInterface* pSelectionCriterionType); |
| ISelectionCriterionInterface* getSelectionCriterion(const std::string& strName); |
| |
| /** Is the remote interface forcefully disabled ? |
| */ |
| bool getForceNoRemoteInterface() const; |
| |
| /** |
| * Forcefully disable the remote interface or cancel this policy. |
| * |
| * Has no effect if called after calling start(). |
| * |
| * @param[in] bForceNoRemoteInterface disable the remote interface if true. |
| */ |
| void setForceNoRemoteInterface(bool bForceNoRemoteInterface); |
| |
| void applyConfigurations(); |
| |
| /** Should start fail in case of missing subsystems. |
| * |
| * @param[in] bFail: If set to true, parameterMgr start will fail on missing subsystems. |
| * If set to false, missing subsystems will fallback on virtual subsystem. |
| */ |
| void setFailureOnMissingSubsystem(bool bFail); |
| |
| /** Would start fail in case of missing subsystems. |
| * |
| * @return true if the subsystem will fail on missing subsystem, false otherwise. |
| */ |
| bool getFailureOnMissingSubsystem() const; |
| |
| /** Should start fail in failed settings load. |
| * |
| * @param[in] bFail: If set to true, parameterMgr start will fail on failed settings load. |
| * If set to false, failed settings load will be ignored. |
| */ |
| void setFailureOnFailedSettingsLoad(bool bFail); |
| /** Would start fail in case of failed settings load. |
| * |
| * @return failure on failed settings load policy state. |
| */ |
| bool getFailureOnFailedSettingsLoad(); |
| |
| /** Get the path to the directory containing the XML Schemas |
| * |
| * @returns the directory containing the XML Schemas |
| */ |
| const std::string& getSchemaFolderLocation() const; |
| |
| /** Override the directory containing the XML Schemas |
| * |
| * @param[in] strSchemaFolderLocation directory containing the XML Schemas |
| */ |
| void setSchemaFolderLocation(const std::string& strSchemaFolderLocation); |
| |
| /** Should .xml files be validated on start ? |
| * |
| * @param[in] bValidate: |
| * If set to true, parameterMgr will report an error |
| * when being unable to validate .xml files |
| * If set to false, no .xml/xsd validation will happen |
| * (default behaviour) |
| * |
| * @return false if unable to set, true otherwise. |
| */ |
| void setValidateSchemasOnStart(bool bValidate); |
| |
| /** Would .xml files be validated on start? |
| * |
| * @return areSchemasValidated |
| */ |
| bool getValidateSchemasOnStart() const; |
| //////////// Tuning ///////////// |
| // Tuning mode |
| bool setTuningMode(bool bOn, std::string& strError); |
| bool isTuningModeOn() const; |
| |
| // Current value space for user set/get value interpretation |
| void setValueSpace(bool bIsRaw); |
| bool isValueSpaceRaw() const; |
| |
| // Current Output Raw Format for user get value interpretation |
| void setOutputRawFormat(bool bIsHex); |
| bool isOutputRawFormatHex() const; |
| // Automatic hardware synchronization control (during tuning session) |
| bool setAutoSync(bool bAutoSyncOn, std::string& strError); |
| bool isAutoSyncOn() const; |
| bool sync(std::string& strError); |
| |
| // User set/get parameters |
| bool accessParameterValue(const std::string& strPath, std::string& strValue, bool bSet, std::string& strError); |
| bool accessConfigurationValue(const std::string &strDomain, const std::string &strConfiguration, const std::string& strPath, std::string& strValue, bool bSet, std::string& strError); |
| |
| /** |
| * Returns the element mapping corresponding to the path given in parameter. |
| * |
| * @param[in] strPath Path of an element |
| * @param[out] strValue A sting containing the mapping |
| * |
| * @return true if a mapping was found for this element |
| */ |
| bool getParameterMapping(const std::string& strPath, std::string& strValue) const; |
| ////////// Configuration/Domains handling ////////////// |
| // Creation/Deletion |
| bool createDomain(const std::string& strName, std::string& strError); |
| bool deleteDomain(const std::string& strName, std::string& strError); |
| bool renameDomain(const std::string& strName, const std::string& strNewName, std::string& strError); |
| bool deleteAllDomains(std::string& strError); |
| bool setSequenceAwareness(const std::string& strName, bool bSequenceAware, std::string& strResult); |
| bool getSequenceAwareness(const std::string& strName, bool& bSequenceAware, std::string& strResult); |
| bool createConfiguration(const std::string& strDomain, const std::string& strConfiguration, std::string& strError); |
| bool deleteConfiguration(const std::string& strDomain, const std::string& strConfiguration, std::string& strError); |
| bool renameConfiguration(const std::string& strDomain, const std::string& strConfiguration, const std::string& strNewConfiguration, std::string& strError); |
| |
| // Save/Restore |
| bool restoreConfiguration(const std::string& strDomain, const std::string& strConfiguration, std::list<std::string>& strError); |
| bool saveConfiguration(const std::string& strDomain, const std::string& strConfiguration, std::string& strError); |
| |
| // Configurable element - domain association |
| bool addConfigurableElementToDomain(const std::string& strDomain, const std::string& strConfigurableElementPath, std::string& strError); |
| bool removeConfigurableElementFromDomain(const std::string& strDomain, const std::string& strConfigurableElementPath, std::string& strError); |
| bool split(const std::string& strDomain, const std::string& strConfigurableElementPath, std::string& strError); |
| bool setElementSequence(const std::string& strDomain, const std::string& strConfiguration, const std::vector<std::string>& astrNewElementSequence, std::string& strError); |
| |
| bool setApplicationRule(const std::string& strDomain, const std::string& strConfiguration, |
| const std::string& strApplicationRule, std::string& strError); |
| bool getApplicationRule(const std::string& strDomain, const std::string& strConfiguration, |
| std::string& strResult); |
| bool clearApplicationRule(const std::string& strDomain, const std::string& strConfiguration, std::string& strError); |
| |
| /** |
| * Method that imports Configurable Domains from an Xml source. |
| * |
| * @param[in] strXmlSource a string containing an xml description or a path to an xml file |
| * @param[in] bWithSettings a boolean that determines if the settings should be used in the |
| * xml description |
| * @param[in] bFromFile a boolean that determines if the source is an xml description in |
| * strXmlSource or contained in a file. In that case strXmlSource is just the file path. |
| * @param[out] strError is used as the error output |
| * |
| * @return false if any error occures |
| */ |
| bool importDomainsXml(const std::string& strXmlSource, bool bWithSettings, bool bFromFile, |
| std::string& strError); |
| /** |
| * Method that imports a single Configurable Domain from an Xml source. |
| * |
| * @param[in] xmlSource a string containing an xml description or a path to an xml file |
| * @param[in] overwrite when importing an existing domain, allow overwriting or return an |
| * error |
| * @param[in] withSettings a boolean that determines if the settings should be used in the |
| * xml description |
| * @param[in] fromFile a boolean that determines if the source is an xml description in |
| * strXmlSource or contained in a file. In that case strXmlSource is just the file path. |
| * @param[out] errorMsg is used as the error output |
| * |
| * @return false if any error occurs |
| */ |
| bool importSingleDomainXml(const std::string& xmlSource, bool overwrite, bool withSettings, |
| bool toFile, std::string& errorMsg); |
| /** |
| * Method that imports a single Configurable Domain from an string |
| * describing an Xml source. |
| * |
| * @deprecated use the other versions of importSingleDomainXml instead |
| * |
| * @param[in] strXmlSource a string containing an xml description |
| * @param[in] bOverwrite when importing an existing domain, allow overwriting or return an |
| * error |
| * @param[out] strError is used as the error output |
| * |
| * @return false if any error occurs |
| */ |
| bool importSingleDomainXml(const std::string& strXmlSource, bool bOverwrite, |
| std::string& strError); |
| |
| |
| /** |
| * Method that exports Configurable Domains to an Xml destination. |
| * |
| * @param[in,out] strXmlDest a string containing an xml description or a path to an xml file |
| * @param[in] bWithSettings a boolean that determines if the settings should be used in the |
| * xml description |
| * @param[in] bToFile a boolean that determines if the destination is an xml description in |
| * strXmlDest or contained in a file. In that case strXmlDest is just the file path. |
| * @param[out] strError is used as the error output |
| * |
| * @return false if any error occures, true otherwise. |
| */ |
| bool exportDomainsXml(std::string& strXmlDest, bool bWithSettings, bool bToFile, |
| std::string& strError) const; |
| |
| /** |
| * Method that exports a given Configurable Domain to an Xml destination. |
| * |
| * @param[in,out] strXmlDest a string containing an xml description or a path to an xml file |
| * @param[in] strDomainName the name of the domain to be exported |
| * @param[in] bWithSettings a boolean that determines if the settings should be used in the |
| * xml description |
| * @param[in] bToFile a boolean that determines if the destination is an xml description in |
| * strXmlDest or contained in a file. In that case strXmlDest is just the file path. |
| * @param[out] strError is used as the error output |
| * |
| * @return false if any error occurs, true otherwise. |
| */ |
| bool exportSingleDomainXml(std::string& strXmlDest, const std::string& strDomainName, bool bWithSettings, |
| bool bToFile, std::string& strError) const; |
| |
| private: |
| // disallow copying because this class manages raw pointers' lifecycle |
| CParameterMgrFullConnector(const CParameterMgrFullConnector&); |
| CParameterMgrFullConnector& operator=(const CParameterMgrFullConnector&); |
| |
| void doLog(bool bIsWarning, const std::string& strLog); |
| |
| CParameterMgr* _pParameterMgr; |
| |
| ILogger* _pLogger; |
| // Log wrapper |
| CParameterMgrLogger<CParameterMgrFullConnector>* _pParameterMgrLogger; |
| }; |