Gitiles
Code Review Sign In
gerrit-public.fairphone.software / fp2-dev / platform / external / parameter-framework / f50298799d1d73c0c40940ca5e8cb71a6b28f798 / . / parameter / ParameterMgr.cpp
blob: 639c59ff998fadf783d956f7a350505ba08b70e6 [file] [log] [blame]
/*
* Copyright (c) 2011-2014, Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "ParameterMgr.h"
#include "XmlParameterSerializingContext.h"
#include "XmlElementSerializingContext.h"
#include "SystemClass.h"
#include "ElementLibrarySet.h"
#include "SubsystemLibrary.h"
#include "NamedElementBuilderTemplate.h"
#include "KindElementBuilderTemplate.h"
#include "ElementBuilderTemplate.h"
#include "SelectionCriterionType.h"
#include "SubsystemElementBuilder.h"
#include "SelectionCriteria.h"
#include "ComponentType.h"
#include "ComponentInstance.h"
#include "ParameterBlockType.h"
#include "BooleanParameterType.h"
#include "IntegerParameterType.h"
#include "FixedPointParameterType.h"
#include "ParameterBlackboard.h"
#include "Parameter.h"
#include "ParameterAccessContext.h"
#include "XmlFileIncluderElement.h"
#include "ParameterFrameworkConfiguration.h"
#include "FrameworkConfigurationGroup.h"
#include "PluginLocation.h"
#include "SubsystemPlugins.h"
#include "FrameworkConfigurationLocation.h"
#include "ConfigurableDomains.h"
#include "ConfigurableDomain.h"
#include "DomainConfiguration.h"
#include "XmlDomainSerializingContext.h"
#include "BitParameterBlockType.h"
#include "BitParameterType.h"
#include "StringParameterType.h"
#include "EnumParameterType.h"
#include "RemoteProcessorServerInterface.h"
#include "ElementLocator.h"
#include "AutoLog.h"
#include "CompoundRule.h"
#include "SelectionCriterionRule.h"
#include "SimulatedBackSynchronizer.h"
#include "HardwareBackSynchronizer.h"
#include "AutoLock.h"
#include <strings.h>
#include <dlfcn.h>
#include <assert.h>
#include "ParameterHandle.h"
#include "LinearParameterAdaptation.h"
#include "EnumValuePair.h"
#include "Subsystem.h"
#include "XmlFileDocSink.h"
#include "XmlFileDocSource.h"
#include "XmlStringDocSink.h"
#include "XmlStringDocSource.h"
#include "XmlMemoryDocSink.h"
#include "XmlMemoryDocSource.h"
#include "Utility.h"
#include <sstream>
#define base CElement
// Used for remote processor server creation
typedef IRemoteProcessorServerInterface* (*CreateRemoteProcessorServer)(uint16_t uiPort, IRemoteCommandHandler* pCommandHandler);
// Global configuration file name (fixed)
const char* gacParameterFrameworkConfigurationFileName = "ParameterFrameworkConfiguration.xml";
const char* gacSystemSchemasSubFolder = "Schemas";
// Config File System looks normally like this:
// ---------------------------------------------
//├── <ParameterFrameworkConfiguration>.xml
//├── Schemas
//│ └── *.xsd
//├── Settings
//│ └── <SystemClassName folder>*
//│ ├── <ConfigurableDomains>.xml
//│ └── <Settings>.bin?
//└── Structure
// └── <SystemClassName folder>*
// ├── <SystemClassName>Class.xml
// └── <Subsystem>.xml*
// --------------------------------------------
// Remote command parser array
const CParameterMgr::SRemoteCommandParserItem CParameterMgr::gastRemoteCommandParserItems[] = {
/// Version
{ "version", &CParameterMgr::versionCommandProcess, 0,
"", "Show version" },
/// Status
{ "status", &CParameterMgr::statusCommandProcess, 0, "",
"Show current status" },
/// Tuning Mode
{ "setTuningMode", &CParameterMgr::setTuningModeCommmandProcess, 1,
"on|off*", "Turn on or off Tuning Mode" },
{ "getTuningMode", &CParameterMgr::getTuningModeCommmandProcess, 0,
"", "Show Tuning Mode" },
/// Value Space
{ "setValueSpace", &CParameterMgr::setValueSpaceCommmandProcess, 1,
"raw|real*", "Assigns Value Space used for parameter value interpretation" },
{ "getValueSpace", &CParameterMgr::getValueSpaceCommmandProcess, 0,
"", "Show Value Space" },
/// Output Raw Format
{ "setOutputRawFormat", &CParameterMgr::setOutputRawFormatCommmandProcess, 1,
"dec*|hex", "Assigns format used to output parameter values when in raw Value Space" },
{ "getOutputRawFormat", &CParameterMgr::getOutputRawFormatCommmandProcess, 0,
"", "Show Output Raw Format" },
/// Sync
{ "setAutoSync", &CParameterMgr::setAutoSyncCommmandProcess, 1,
"on*|off", "Turn on or off automatic synchronization to hardware while in Tuning Mode" },
{ "getAutoSync", &CParameterMgr::getAutoSyncCommmandProcess, 0,
"", "Show Auto Sync state" },
{ "sync", &CParameterMgr::syncCommmandProcess, 0,
"", "Synchronize current settings to hardware while in Tuning Mode and Auto Sync off" },
/// Criteria
{ "listCriteria", &CParameterMgr::listCriteriaCommmandProcess, 0,
"[csv]", "List selection criteria" },
/// Domains
{ "listDomains", &CParameterMgr::listDomainsCommmandProcess, 0,
"", "List configurable domains" },
{ "dumpDomains", &CParameterMgr::dumpDomainsCommmandProcess, 0,
"", "Show all domains and configurations, including applicability conditions" },
{ "createDomain", &CParameterMgr::createDomainCommmandProcess, 1,
"<domain>", "Create new configurable domain" },
{ "deleteDomain", &CParameterMgr::deleteDomainCommmandProcess, 1,
"<domain>", "Delete configurable domain" },
{ "deleteAllDomains", &CParameterMgr::deleteAllDomainsCommmandProcess, 0,
"", "Delete all configurable domains" },
{ "renameDomain", &CParameterMgr::renameDomainCommmandProcess, 2,
"<domain> <new name>", "Rename configurable domain" },
{ "setSequenceAwareness", &CParameterMgr::setSequenceAwarenessCommmandProcess, 1,
"<domain> true|false*", "Set configurable domain sequence awareness" },
{ "getSequenceAwareness", &CParameterMgr::getSequenceAwarenessCommmandProcess, 1,
"<domain>", "Get configurable domain sequence awareness" },
{ "listDomainElements", &CParameterMgr::listDomainElementsCommmandProcess, 1,
"<domain>", "List elements associated to configurable domain" },
{ "addElement", &CParameterMgr::addElementCommmandProcess, 2,
"<domain> <elem path>", "Associate element at given path to configurable domain" },
{ "removeElement", &CParameterMgr::removeElementCommmandProcess, 2,
"<domain> <elem path>", "Dissociate element at given path from configurable domain" },
{ "splitDomain", &CParameterMgr::splitDomainCommmandProcess, 2,
"<domain> <elem path>", "Split configurable domain at given associated element path" },
/// Configurations
{ "listConfigurations", &CParameterMgr::listConfigurationsCommmandProcess, 1,
"<domain>", "List domain configurations" },
{ "createConfiguration", &CParameterMgr::createConfigurationCommmandProcess, 2,
"<domain> <configuration>", "Create new domain configuration" },
{ "deleteConfiguration", &CParameterMgr::deleteConfigurationCommmandProcess, 2,
"<domain> <configuration>", "Delete domain configuration" },
{ "renameConfiguration", &CParameterMgr::renameConfigurationCommmandProcess, 3,
"<domain> <configuration> <new name>", "Rename domain configuration" },
{ "saveConfiguration", &CParameterMgr::saveConfigurationCommmandProcess, 2,
"<domain> <configuration>", "Save current settings into configuration" },
{ "restoreConfiguration", &CParameterMgr::restoreConfigurationCommmandProcess, 2,
"<domain> <configuration>", "Restore current settings from configuration" },
{ "setElementSequence", &CParameterMgr::setElementSequenceCommmandProcess, 3,
"<domain> <configuration> <elem path list>",
"Set element application order for configuration" },
{ "getElementSequence", &CParameterMgr::getElementSequenceCommmandProcess, 2,
"<domain> <configuration>", "Get element application order for configuration" },
{ "setRule", &CParameterMgr::setRuleCommmandProcess, 3,
"<domain> <configuration> <rule>", "Set configuration application rule" },
{ "clearRule", &CParameterMgr::clearRuleCommmandProcess, 2,
"<domain> <configuration>", "Clear configuration application rule" },
{ "getRule", &CParameterMgr::getRuleCommmandProcess, 2,
"<domain> <configuration>", "Get configuration application rule" },
/// Elements/Parameters
{ "listElements", &CParameterMgr::listElementsCommmandProcess, 1,
"<elem path>|/", "List elements under element at given path or root" },
{ "listParameters", &CParameterMgr::listParametersCommmandProcess, 1,
"<elem path>|/", "List parameters under element at given path or root" },
{ "dumpElement", &CParameterMgr::dumpElementCommmandProcess, 1,
"<elem path>", "Dump structure and content of element at given path" },
{ "getElementSize", &CParameterMgr::getElementSizeCommmandProcess, 1,
"<elem path>", "Show size of element at given path" },
{ "showProperties", &CParameterMgr::showPropertiesCommmandProcess, 1,
"<elem path>", "Show properties of element at given path" },
{ "getParameter", &CParameterMgr::getParameterCommmandProcess, 1,
"<param path>", "Get value for parameter at given path" },
{ "setParameter", &CParameterMgr::setParameterCommmandProcess, 2,
"<param path> <value>", "Set value for parameter at given path" },
{ "listBelongingDomains", &CParameterMgr::listBelongingDomainsCommmandProcess, 1,
"<elem path>", "List domain(s) element at given path belongs to" },
{ "listAssociatedDomains", &CParameterMgr::listAssociatedDomainsCommmandProcess, 1,
"<elem path>", "List domain(s) element at given path is associated to" },
{ "getConfigurationParameter", &CParameterMgr::getConfigurationParameterCommmandProcess, 3,
"<domain> <configuration> <param path>",
"Get value for parameter at given path from configuration" },
{ "setConfigurationParameter", &CParameterMgr::setConfigurationParameterCommmandProcess, 4,
"<domain> <configuration> <param path> <value>",
"Set value for parameter at given path to configuration" },
{ "showMapping", &CParameterMgr::showMappingCommmandProcess, 1,
"<elem path>", "Show mapping for an element at given path" },
/// Browse
{ "listAssociatedElements", &CParameterMgr::listAssociatedElementsCommmandProcess, 0,
"", "List element sub-trees associated to at least one configurable domain" },
{ "listConflictingElements", &CParameterMgr::listConflictingElementsCommmandProcess, 0,
"", "List element sub-trees contained in more than one configurable domain" },
{ "listRogueElements", &CParameterMgr::listRogueElementsCommmandProcess, 0,
"", "List element sub-trees owned by no configurable domain" },
/// Settings Import/Export
{ "exportDomainsXML", &CParameterMgr::exportConfigurableDomainsToXMLCommmandProcess, 1,
"<file path> ", "Export domains to XML file" },
{ "importDomainsXML", &CParameterMgr::importConfigurableDomainsFromXMLCommmandProcess, 1,
"<file path>", "Import domains from XML file" },
{ "exportDomainsWithSettingsXML",
&CParameterMgr::exportConfigurableDomainsWithSettingsToXMLCommmandProcess, 1,
"<file path> ", "Export domains including settings to XML file" },
{ "importDomainsWithSettingsXML",
&CParameterMgr::importConfigurableDomainsWithSettingsFromXMLCommmandProcess, 1,
"<file path>", "Import domains including settings from XML file" },
{ "exportSettings", &CParameterMgr::exportSettingsCommmandProcess, 1,
"<file path>", "Export settings to binary file" },
{ "importSettings", &CParameterMgr::importSettingsCommmandProcess, 1,
"<file path>", "Import settings from binary file" },
{ "getDomainsWithSettingsXML",
&CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess, 0,
"", "Print domains including settings as XML" },
{ "setDomainsWithSettingsXML",
&CParameterMgr::setConfigurableDomainsWithSettingsXMLCommmandProcess, 1,
"<xml configurable domains>", "Import domains including settings from XML string" },
/// Structure Export
{ "getSystemClassXML", &CParameterMgr::getSystemClassXMLCommmandProcess, 0 ,
"", "Print parameter structure as XML" },
/// Deprecated Commands
{ "getDomainsXML",
&CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess, 0,
"", "DEPRECATED COMMAND, please use getDomainsWithSettingsXML" },
};
// Remote command parsers array Size
const uint32_t CParameterMgr::guiNbRemoteCommandParserItems = sizeof(gastRemoteCommandParserItems) / sizeof(gastRemoteCommandParserItems[0]);
CParameterMgr::CParameterMgr(const string& strConfigurationFilePath) :
_bTuningModeIsOn(false),
_bValueSpaceIsRaw(false),
_bOutputRawFormatIsHex(false),
_bAutoSyncOn(true),
_pMainParameterBlackboard(new CParameterBlackboard),
_pElementLibrarySet(new CElementLibrarySet),
_strXmlConfigurationFilePath(strConfigurationFilePath),
_pSubsystemPlugins(NULL),
_handleLibRemoteProcessor(NULL),
_uiStructureChecksum(0),
_pRemoteProcessorServer(NULL),
_uiMaxCommandUsageLength(0),
_pLogger(NULL),
_uiLogDepth(0),
_bFailOnMissingSubsystem(true),
_bFailOnFailedSettingsLoad(true)
{
// Tuning Mode Mutex
bzero(&_blackboardMutex, sizeof(_blackboardMutex));
pthread_mutex_init(&_blackboardMutex, NULL);
// Deal with children
addChild(new CParameterFrameworkConfiguration);
addChild(new CSelectionCriteria);
addChild(new CSystemClass);
addChild(new CConfigurableDomains);
// Feed element library
feedElementLibraries();
_pCommandHandler = new CCommandHandler(this);
// Add command parsers
uint32_t uiRemoteCommandParserItem;
for (uiRemoteCommandParserItem = 0; uiRemoteCommandParserItem < guiNbRemoteCommandParserItems; uiRemoteCommandParserItem++) {
const SRemoteCommandParserItem* pRemoteCommandParserItem = &gastRemoteCommandParserItems[uiRemoteCommandParserItem];
_pCommandHandler->addCommandParser(pRemoteCommandParserItem->_pcCommandName,
pRemoteCommandParserItem->_pfnParser,
pRemoteCommandParserItem->_uiMinArgumentCount,
pRemoteCommandParserItem->_pcHelp,
pRemoteCommandParserItem->_pcDescription);
}
// Configuration file folder
uint32_t uiSlashPos = _strXmlConfigurationFilePath.rfind('/', -1);
assert(uiSlashPos != (uint32_t)-1);
_strXmlConfigurationFolderPath = _strXmlConfigurationFilePath.substr(0, uiSlashPos);
// Schema absolute folder location
_strSchemaFolderLocation = _strXmlConfigurationFolderPath + "/" + gacSystemSchemasSubFolder;
}
CParameterMgr::~CParameterMgr()
{
// Children
delete _pRemoteProcessorServer;
delete _pCommandHandler;
delete _pMainParameterBlackboard;
delete _pElementLibrarySet;
// Close remote processor library
if (_handleLibRemoteProcessor != NULL) {
dlclose(_handleLibRemoteProcessor);
}
// Tuning Mode Mutex
pthread_mutex_destroy(&_blackboardMutex);
}
string CParameterMgr::getKind() const
{
return "ParameterMgr";
}
// Logging
void CParameterMgr::setLogger(CParameterMgr::ILogger* pLogger)
{
_pLogger = pLogger;
}
// Logging
void CParameterMgr::doLog(bool bIsWarning, const string& strLog) const
{
if (_pLogger) {
// Nest
string strIndent;
// Level
uint32_t uiNbIndents = _uiLogDepth;
while (uiNbIndents--) {
strIndent += " ";
}
// Log
_pLogger->log(bIsWarning, strIndent + strLog);
}
}
void CParameterMgr::nestLog() const
{
_uiLogDepth++;
}
void CParameterMgr::unnestLog() const
{
_uiLogDepth--;
}
// Version
string CParameterMgr::getVersion() const
{
string strVersion;
// Major
strVersion = toString(guiEditionMajor) + ".";
// Minor
strVersion += toString(guiEditionMinor) + ".";
// Revision
strVersion += toString(guiRevision);
return strVersion;
}
bool CParameterMgr::load(string& strError)
{
CAutoLog autoLog(this, "Loading");
// Load Framework configuration
if (!loadFrameworkConfiguration(strError)) {
return false;
}
// Load subsystems
if (!getSystemClass()->loadSubsystems(strError,
_pSubsystemPlugins, !_bFailOnMissingSubsystem)) {
return false;
}
// Load structure
if (!loadStructure(strError)) {
return false;
}
// Load settings
if (!loadSettings(strError)) {
return false;
}
// Back synchronization for areas in parameter blackboard not covered by any domain
CBackSynchronizer* pBackSynchronizer = createBackSynchronizer();
// Back-synchronize
{
CAutoLog autoLog(this, "Main blackboard back synchronization");
pBackSynchronizer->sync();
// Get rid of back synchronizer
delete pBackSynchronizer;
}
// We're done loading the settings and back synchronizing
CConfigurableDomains* pConfigurableDomains = getConfigurableDomains();
// We need to ensure all domains are valid
pConfigurableDomains->validate(_pMainParameterBlackboard);
// Log selection criterion states
{
CAutoLog autoLog(this, "Criterion states");
const CSelectionCriteria* selectionCriteria = getConstSelectionCriteria();
list<string> lstrSelectionCriteron;
selectionCriteria->listSelectionCriteria(lstrSelectionCriteron, true, false);
log_table(false, lstrSelectionCriteron);
}
// Subsystem can not ask for resync as they have not been synced yet
getSystemClass()->cleanSubsystemsNeedToResync();
// At initialization, check subsystems that need resync
doApplyConfigurations(true);
// Start remote processor server if appropriate
return handleRemoteProcessingInterface(strError);
}
bool CParameterMgr::loadFrameworkConfiguration(string& strError)
{
CAutoLog autoLog(this, "Loading framework configuration");
// Parse Structure XML file
CXmlElementSerializingContext elementSerializingContext(strError);
if (!xmlParse(elementSerializingContext, getFrameworkConfiguration(), _strXmlConfigurationFilePath, _strXmlConfigurationFolderPath, EFrameworkConfigurationLibrary)) {
return false;
}
// Set class name to system class and configurable domains
getSystemClass()->setName(getConstFrameworkConfiguration()->getSystemClassName());
getConfigurableDomains()->setName(getConstFrameworkConfiguration()->getSystemClassName());
// Get subsystem plugins elements
_pSubsystemPlugins = static_cast<const CSubsystemPlugins*>(getConstFrameworkConfiguration()->findChild("SubsystemPlugins"));
if (!_pSubsystemPlugins) {
strError = "Parameter Framework Configuration: couldn't find SubsystemPlugins element";
return false;
}
// Log tuning availability
log_info("Tuning %s", getConstFrameworkConfiguration()->isTuningAllowed() ? "allowed" : "prohibited");
return true;
}
bool CParameterMgr::loadStructure(string& strError)
{
// Retrieve system to load structure to
CSystemClass* pSystemClass = getSystemClass();
log_info("Loading " + pSystemClass->getName() + " system class structure");
// Get structure description element
const CFrameworkConfigurationLocation* pStructureDescriptionFileLocation = static_cast<const CFrameworkConfigurationLocation*>(getConstFrameworkConfiguration()->findChildOfKind("StructureDescriptionFileLocation"));
if (!pStructureDescriptionFileLocation) {
strError = "No StructureDescriptionFileLocation element found for SystemClass " + pSystemClass->getName();
return false;
}
// Get Xml structure folder
string strXmlStructureFolder = pStructureDescriptionFileLocation->getFolderPath(_strXmlConfigurationFolderPath);
// Get Xml structure file name
string strXmlStructureFilePath = pStructureDescriptionFileLocation->getFilePath(_strXmlConfigurationFolderPath);
// Parse Structure XML file
CXmlParameterSerializingContext parameterBuildContext(strError);
CAutoLog autolog(pSystemClass, "Importing system structure from file " + strXmlStructureFilePath);
if (!xmlParse(parameterBuildContext, pSystemClass, strXmlStructureFilePath, strXmlStructureFolder, EParameterCreationLibrary)) {
return false;
}
// Initialize offsets
pSystemClass->setOffset(0);
// Initialize main blackboard's size
_pMainParameterBlackboard->setSize(pSystemClass->getFootPrint());
return true;
}
bool CParameterMgr::loadSettings(string& strError)
{
string strLoadError;
bool success = loadSettingsFromConfigFile(strLoadError);
if (!success && !_bFailOnFailedSettingsLoad) {
// Load can not fail, ie continue but log the load errors
log_info(strLoadError);
log_info("Failed to load settings, continue without domains.");
success = true;
}
if (!success) {
// Propagate the litteral error only if the function fails
strError = strLoadError;
return false;
}
return true;
}
bool CParameterMgr::loadSettingsFromConfigFile(string& strError)
{
CAutoLog autoLog(this, "Loading settings");
// Get settings configuration element
const CFrameworkConfigurationGroup* pParameterConfigurationGroup = static_cast<const CFrameworkConfigurationGroup*>(getConstFrameworkConfiguration()->findChildOfKind("SettingsConfiguration"));
if (!pParameterConfigurationGroup) {
// No settings to load
return true;
}
// Get binary settings file location
const CFrameworkConfigurationLocation* pBinarySettingsFileLocation = static_cast<const CFrameworkConfigurationLocation*>(pParameterConfigurationGroup->findChildOfKind("BinarySettingsFileLocation"));
string strXmlBinarySettingsFilePath;
if (pBinarySettingsFileLocation) {
// Get Xml binary settings file name
strXmlBinarySettingsFilePath = pBinarySettingsFileLocation->getFilePath(_strXmlConfigurationFolderPath);
}
// Get configurable domains element
const CFrameworkConfigurationLocation* pConfigurableDomainsFileLocation = static_cast<const CFrameworkConfigurationLocation*>(pParameterConfigurationGroup->findChildOfKind("ConfigurableDomainsFileLocation"));
if (!pConfigurableDomainsFileLocation) {
strError = "No ConfigurableDomainsFileLocation element found for SystemClass " + getSystemClass()->getName();
return false;
}
// Get destination root element
CConfigurableDomains* pConfigurableDomains = getConfigurableDomains();
// Get Xml configuration domains file name
string strXmlConfigurationDomainsFilePath = pConfigurableDomainsFileLocation->getFilePath(_strXmlConfigurationFolderPath);
// Get Xml configuration domains folder
string strXmlConfigurationDomainsFolder = pConfigurableDomainsFileLocation->getFolderPath(_strXmlConfigurationFolderPath);
// Parse configuration domains XML file (ask to read settings from XML file if they are not provided as binary)
CXmlDomainSerializingContext xmlDomainSerializingContext(strError, !pBinarySettingsFileLocation);
// Selection criteria definition for rule creation
xmlDomainSerializingContext.setSelectionCriteriaDefinition(getConstSelectionCriteria()->getSelectionCriteriaDefinition());
// Auto validation of configurations if no binary settings provided
xmlDomainSerializingContext.setAutoValidationRequired(!pBinarySettingsFileLocation);
log_info("Importing configurable domains from file %s %s settings", strXmlConfigurationDomainsFilePath.c_str(), pBinarySettingsFileLocation ? "without" : "with");
// Do parse
if (!xmlParse(xmlDomainSerializingContext, pConfigurableDomains, strXmlConfigurationDomainsFilePath, strXmlConfigurationDomainsFolder, EParameterConfigurationLibrary, "SystemClassName")) {
return false;
}
// We have loaded the whole system structure, compute checksum
const CSystemClass* pSystemClass = getConstSystemClass();
_uiStructureChecksum = pSystemClass->computeStructureChecksum() + getConfigurableDomains()->computeStructureChecksum() + getSelectionCriteria()->computeStructureChecksum();
// Load binary settings if any provided
if (pBinarySettingsFileLocation && !pConfigurableDomains->serializeSettings(strXmlBinarySettingsFilePath, false, _uiStructureChecksum, strError)) {
return false;
}
return true;
}
// XML parsing
bool CParameterMgr::xmlParse(CXmlElementSerializingContext& elementSerializingContext, CElement* pRootElement, const string& strXmlFilePath, const string& strXmlFolder, CParameterMgr::ElementLibrary eElementLibrary, const string& strNameAttrituteName)
{
// Init serializing context
elementSerializingContext.set(_pElementLibrarySet->getElementLibrary(eElementLibrary), strXmlFolder, _strSchemaFolderLocation);
// Get Schema file associated to root element
string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" + pRootElement->getKind() + ".xsd";
CXmlFileDocSource fileDocSource(strXmlFilePath, strXmlSchemaFilePath, pRootElement->getKind(), pRootElement->getName(), strNameAttrituteName);
// Start clean
pRootElement->clean();
CXmlMemoryDocSink memorySink(pRootElement);
if (!memorySink.process(fileDocSource, elementSerializingContext)) {
//Cleanup
pRootElement->clean();
return false;
}
return true;
}
// Init
bool CParameterMgr::init(string& strError)
{
return base::init(strError);
}
// Selection criteria interface
CSelectionCriterionType* CParameterMgr::createSelectionCriterionType(bool bIsInclusive)
{
// Propagate
return getSelectionCriteria()->createSelectionCriterionType(bIsInclusive);
}
CSelectionCriterion* CParameterMgr::createSelectionCriterion(const string& strName, const CSelectionCriterionType* pSelectionCriterionType)
{
// Propagate
return getSelectionCriteria()->createSelectionCriterion(strName, pSelectionCriterionType);
}
// Selection criterion retrieval
CSelectionCriterion* CParameterMgr::getSelectionCriterion(const string& strName)
{
// Propagate
return getSelectionCriteria()->getSelectionCriterion(strName);
}
// Configuration application
void CParameterMgr::applyConfigurations()
{
CAutoLog autoLog(this, "Configuration application request");
// Lock state
CAutoLock autoLock(&_blackboardMutex);
if (!_bTuningModeIsOn) {
// Apply configuration(s)
doApplyConfigurations(false);
} else {
log_warning("Configurations were not applied because the TuningMode is on");
}
}
// Get the configurableElement corresponding to the given path
const CConfigurableElement* CParameterMgr::getConfigurableElement(const string& strPath,
string& strError) const
{
CPathNavigator pathNavigator(strPath);
// Nagivate through system class
if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strError)) {
return NULL;
}
// Find element
const CElement* pElement = getConstSystemClass()->findDescendant(pathNavigator);
if (!pElement) {
strError = "Path not found: " + strPath;
return NULL;
}
// Check found element is a parameter
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pElement);
return pConfigurableElement;
}
// Dynamic parameter handling
CParameterHandle* CParameterMgr::createParameterHandle(const string& strPath, string& strError)
{
const CConfigurableElement* pConfigurableElement = getConfigurableElement(strPath, strError);
if (!pConfigurableElement) {
// Element not found
strError = "Element not found: " + strPath;
return NULL;
}
if (!pConfigurableElement->isParameter()) {
// Element is not parameter
strError = "Not a parameter: " + strPath;
return NULL;
}
// Convert as parameter and return new handle
return new CParameterHandle(static_cast<const CBaseParameter*>(pConfigurableElement), this);
}
void CParameterMgr::setFailureOnMissingSubsystem(bool bFail)
{
_bFailOnMissingSubsystem = bFail;
}
bool CParameterMgr::getFailureOnMissingSubsystem() const
{
return _bFailOnMissingSubsystem;
}
void CParameterMgr::setFailureOnFailedSettingsLoad(bool bFail)
{
_bFailOnFailedSettingsLoad = bFail;
}
bool CParameterMgr::getFailureOnFailedSettingsLoad()
{
return _bFailOnFailedSettingsLoad;
}
/////////////////// Remote command parsers
/// Version
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::versionCommandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
// Show version
strResult = getVersion();
return CCommandHandler::ESucceeded;
}
/// Status
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::statusCommandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
// System class
const CSystemClass* pSystemClass = getSystemClass();
// Show status
/// General section
appendTitle(strResult, "General:");
// System class
strResult += "System Class: ";
strResult += pSystemClass->getName();
strResult += "\n";
// Tuning mode
strResult += "Tuning Mode: ";
strResult += tuningModeOn() ? "on" : "off";
strResult += "\n";
// Value space
strResult += "Value Space: ";
strResult += valueSpaceIsRaw() ? "raw" : "real";
strResult += "\n";
// Output raw format
strResult += "Output Raw Format: ";
strResult += outputRawFormatIsHex() ? "hex" : "dec";
strResult += "\n";
// Auto Sync
strResult += "Auto Sync: ";
strResult += autoSyncOn() ? "on" : "off";
strResult += "\n";
/// Subsystem list
appendTitle(strResult, "Subsystems:");
string strSubsystemList;
pSystemClass->listChildrenPaths(strSubsystemList);
strResult += strSubsystemList;
/// Last applied configurations
appendTitle(strResult, "Last Applied [Pending] Configurations:");
string strLastAppliedConfigurations;
getConfigurableDomains()->listLastAppliedConfigurations(strLastAppliedConfigurations);
strResult += strLastAppliedConfigurations;
/// Criteria states
appendTitle(strResult, "Selection Criteria:");
list<string> lstrSelectionCriteria;
getSelectionCriteria()->listSelectionCriteria(lstrSelectionCriteria, false, true);
// Concatenate the criterion list as the command result
string strCriteriaStates;
CUtility::asString(lstrSelectionCriteria, strCriteriaStates);
strResult += strCriteriaStates;
return CCommandHandler::ESucceeded;
}
/// Tuning Mode
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setTuningModeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
if (remoteCommand.getArgument(0) == "on") {
if (setTuningMode(true, strResult)) {
return CCommandHandler::EDone;
}
} else if (remoteCommand.getArgument(0) == "off") {
if (setTuningMode(false, strResult)) {
return CCommandHandler::EDone;
}
} else {
// Show usage
return CCommandHandler::EShowUsage;
}
return CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getTuningModeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
strResult = tuningModeOn() ? "on" : "off";
return CCommandHandler::ESucceeded;
}
/// Value Space
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setValueSpaceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)strResult;
if (remoteCommand.getArgument(0) == "raw") {
setValueSpace(true);
return CCommandHandler::EDone;
} else if (remoteCommand.getArgument(0) == "real") {
setValueSpace(false);
return CCommandHandler::EDone;
} else {
// Show usage
return CCommandHandler::EShowUsage;
}
return CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getValueSpaceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
strResult = valueSpaceIsRaw() ? "raw" : "real";
return CCommandHandler::ESucceeded;
}
/// Output Raw Format
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setOutputRawFormatCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)strResult;
if (remoteCommand.getArgument(0) == "hex") {
setOutputRawFormat(true);
return CCommandHandler::EDone;
} else if (remoteCommand.getArgument(0) == "dec") {
setOutputRawFormat(false);
return CCommandHandler::EDone;
} else {
// Show usage
return CCommandHandler::EShowUsage;
}
return CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getOutputRawFormatCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
strResult = outputRawFormatIsHex() ? "hex" : "dec";
return CCommandHandler::ESucceeded;
}
/// Sync
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setAutoSyncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
if (remoteCommand.getArgument(0) == "on") {
if (setAutoSync(true, strResult)) {
return CCommandHandler::EDone;
}
} else if (remoteCommand.getArgument(0) == "off") {
if (setAutoSync(false, strResult)) {
return CCommandHandler::EDone;
}
} else {
// Show usage
return CCommandHandler::EShowUsage;
}
return CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getAutoSyncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
strResult = autoSyncOn() ? "on" : "off";
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::syncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
return sync(strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
/// Criteria
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listCriteriaCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
bool humanReadable = true;
// Look for optional arguments
if (remoteCommand.getArgumentCount() >= 1) {
// If csv is provided, format the criterion list in Commas Separated Value pairs
if (remoteCommand.getArgument(0) == "csv") {
humanReadable = false;
} else {
return CCommandHandler::EShowUsage;
}
}
list<string> lstrResult;
getSelectionCriteria()->listSelectionCriteria(lstrResult, true, humanReadable);
// Concatenate the criterion list as the command result
CUtility::asString(lstrResult, strResult);
return CCommandHandler::ESucceeded;
}
/// Domains
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
getConfigurableDomains()->listDomains(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::createDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return createDomain(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return deleteDomain(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteAllDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
return deleteAllDomains(strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::renameDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return getConfigurableDomains()->renameDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setSequenceAwarenessCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Check tuning mode
if (!checkTuningModeOn(strResult)) {
return CCommandHandler::EFailed;
}
// Set property
bool bSequenceAware;
if (remoteCommand.getArgument(1) == "true") {
bSequenceAware = true;
} else if (remoteCommand.getArgument(1) == "false") {
bSequenceAware = false;
} else {
// Show usage
return CCommandHandler::EShowUsage;
}
return getConfigurableDomains()->setSequenceAwareness(remoteCommand.getArgument(0), bSequenceAware, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getSequenceAwarenessCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Get property
bool bSequenceAware;
if (!getConfigurableDomains()->getSequenceAwareness(remoteCommand.getArgument(0), bSequenceAware, strResult)) {
return CCommandHandler::EFailed;
}
strResult = bSequenceAware ? "true" : "false";
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listDomainElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return getConfigurableDomains()->listDomainElements(remoteCommand.getArgument(0), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::addElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return addConfigurableElementToDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::removeElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return removeConfigurableElementFromDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::splitDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return split(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
/// Configurations
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listConfigurationsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return getConstConfigurableDomains()->listConfigurations(remoteCommand.getArgument(0), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::dumpDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
// Dummy error context
string strError;
CErrorContext errorContext(strError);
// Dump
getConstConfigurableDomains()->dumpContent(strResult, errorContext);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::createConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return createConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return deleteConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::renameConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return getConfigurableDomains()->renameConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.getArgument(2), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::saveConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return saveConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::restoreConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
list<string> lstrResult;
if (!restoreConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), lstrResult)) {
//Concatenate the error list as the command result
CUtility::asString(lstrResult, strResult);
return CCommandHandler::EFailed;
}
return CCommandHandler::EDone;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setElementSequenceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Check tuning mode
if (!checkTuningModeOn(strResult)) {
return CCommandHandler::EFailed;
}
// Build configurable element path list
vector<string> astrNewElementSequence;
uint32_t uiArgument;
for (uiArgument = 2; uiArgument < remoteCommand.getArgumentCount(); uiArgument++) {
astrNewElementSequence.push_back(remoteCommand.getArgument(uiArgument));
}
// Delegate to configurable domains
return getConfigurableDomains()->setElementSequence(remoteCommand.getArgument(0), remoteCommand.getArgument(1), astrNewElementSequence, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getElementSequenceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Delegate to configurable domains
return getConfigurableDomains()->getElementSequence(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Delegate to configurable domains
return getConfigurableDomains()->setApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.packArguments(2, remoteCommand.getArgumentCount() - 2), getConstSelectionCriteria()->getSelectionCriteriaDefinition(), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::clearRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Delegate to configurable domains
return getConfigurableDomains()->clearApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Delegate to configurable domains
return getConfigurableDomains()->getApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed;
}
/// Elements/Parameters
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass(), false);
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
strResult = string("\n");
if (!pLocatedElement) {
// List from root folder
// Return system class qualified name
pLocatedElement = getSystemClass();
}
// Return sub-elements
strResult += pLocatedElement->listQualifiedPaths(false);
return CCommandHandler::ESucceeded;
}
/// Elements/Parameters
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listParametersCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass(), false);
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
strResult = string("\n");
if (!pLocatedElement) {
// List from root folder
// Return system class qualified name
pLocatedElement = getSystemClass();
}
// Return sub-elements
strResult += pLocatedElement->listQualifiedPaths(true);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::dumpElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
string strError;
CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex);
// Dump elements
pLocatedElement->dumpContent(strResult, parameterAccessContext);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getElementSizeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
// Converted to actual sizable element
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pLocatedElement);
// Get size as string
strResult = pConfigurableElement->getFootprintAsString();
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::showPropertiesCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
// Convert element
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pLocatedElement);
// Return element properties
pConfigurableElement->showProperties(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
string strValue;
if (!accessParameterValue(remoteCommand.getArgument(0), strValue, false, strResult)) {
return CCommandHandler::EFailed;
}
// Succeeded
strResult = strValue;
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Check tuning mode
if (!checkTuningModeOn(strResult)) {
return CCommandHandler::EFailed;
}
// Get value to set
string strValue = remoteCommand.packArguments(1, remoteCommand.getArgumentCount() - 1);
return accessParameterValue(remoteCommand.getArgument(0), strValue, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listBelongingDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
// Convert element
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pLocatedElement);
// Return element belonging domains
pConfigurableElement->listBelongingDomains(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listAssociatedDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) {
return CCommandHandler::EFailed;
}
// Convert element
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pLocatedElement);
// Return element belonging domains
pConfigurableElement->listAssociatedDomains(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listAssociatedElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
getConfigurableDomains()->listAssociatedElements(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listConflictingElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
getConfigurableDomains()->listConflictingElements(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listRogueElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
getSystemClass()->listRogueElements(strResult);
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getConfigurationParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
string strOutputValue;
string strError;
if (!accessConfigurationValue(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.getArgument(2), strOutputValue, false, strError)) {
strResult = strError;
return CCommandHandler::EFailed;
}
// Succeeded
strResult = strOutputValue;
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setConfigurationParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
// Get value to set
string strValue = remoteCommand.packArguments(3, remoteCommand.getArgumentCount() - 3);
bool bSuccess = accessConfigurationValue(remoteCommand.getArgument(0),
remoteCommand.getArgument(1),
remoteCommand.getArgument(2),
strValue, true, strResult);
return bSuccess ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::showMappingCommmandProcess(
const IRemoteCommand& remoteCommand,
string& strResult)
{
if (!getParameterMapping(remoteCommand.getArgument(0), strResult)) {
return CCommandHandler::EFailed;
}
return CCommandHandler::ESucceeded;
}
/// Settings Import/Export
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::exportConfigurableDomainsToXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
string strFileName = remoteCommand.getArgument(0);
return exportDomainsXml(strFileName, false, true, strResult) ?
CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::importConfigurableDomainsFromXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
return importDomainsXml(remoteCommand.getArgument(0), false, true, strResult) ?
CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::exportConfigurableDomainsWithSettingsToXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
string strFileName = remoteCommand.getArgument(0);
return exportDomainsXml(strFileName, true, true, strResult) ?
CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::importConfigurableDomainsWithSettingsFromXMLCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return importDomainsXml(remoteCommand.getArgument(0), true, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::exportSettingsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return exportDomainsBinary(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::importSettingsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult)
{
return importDomainsBinary(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
if (!exportDomainsXml(strResult, true, false, strResult)) {
return CCommandHandler::EFailed;
}
// Succeeded
return CCommandHandler::ESucceeded;
}
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::setConfigurableDomainsWithSettingsXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
return importDomainsXml(remoteCommand.getArgument(0), true, false, strResult) ?
CCommandHandler::EDone : CCommandHandler::EFailed;
}
CParameterMgr::CCommandHandler::CommandStatus
CParameterMgr::getSystemClassXMLCommmandProcess(
const IRemoteCommand& remoteCommand, string& strResult)
{
(void)remoteCommand;
if (!getSystemClassXMLString(strResult)) {
return CCommandHandler::EFailed;
}
// Succeeded
return CCommandHandler::ESucceeded;
}
// User set/get parameters in main BlackBoard
bool CParameterMgr::accessParameterValue(const string& strPath, string& strValue, bool bSet, string& strError)
{
// Define context
CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex);
// Activate the auto synchronization with the hardware
if (bSet) {
parameterAccessContext.setAutoSync(_bAutoSyncOn);
}
return accessValue(parameterAccessContext, strPath, strValue, bSet, strError);
}
// User get parameter mapping
bool CParameterMgr::getParameterMapping(const string& strPath, string& strResult) const
{
CPathNavigator pathNavigator(strPath);
// Nagivate through system class
if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strResult)) {
return false;
}
// Get the ConfigurableElement corresponding to strPath
const CConfigurableElement* pConfigurableElement = getConfigurableElement(strPath, strResult);
if (!pConfigurableElement) {
return false;
}
// Find the list of the ancestors of the current ConfigurableElement that have a mapping
list<const CConfigurableElement*> configurableElementPath;
pConfigurableElement->getListOfElementsWithMapping(configurableElementPath);
// Get the Subsystem containing the ConfigurableElement
const CSubsystem* pSubsystem = pConfigurableElement->getBelongingSubsystem();
if (!pSubsystem) {
strResult = "Unable to find the Subsystem containing the parameter";
return false;
}
// Fetch the mapping corresponding to the ConfigurableElement
strResult = pSubsystem->getMapping(configurableElementPath);
return true;
}
// User set/get parameters in specific Configuration BlackBoard
bool CParameterMgr::accessConfigurationValue(const string& strDomain, const string& strConfiguration, const string& strPath, string& strValue, bool bSet, string& strError)
{
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(strPath, &pLocatedElement, strError)) {
return false;
}
// Convert element
const CConfigurableElement* pConfigurableElement = static_cast<const CConfigurableElement*>(pLocatedElement);
// Get the Configuration blackboard and the Base Offset of the configurable element in this blackboard
uint32_t uiBaseOffset;
bool bIsLastApplied;
CParameterBlackboard* pConfigurationBlackboard = getConstConfigurableDomains()->findConfigurationBlackboard(strDomain, strConfiguration, pConfigurableElement, uiBaseOffset, bIsLastApplied, strError);
if (!pConfigurationBlackboard) {
return false;
}
log_info("Element %s in Domain %s, offset: %d, base offset: %d", strPath.c_str(), strDomain.c_str(), pConfigurableElement->getOffset(), uiBaseOffset);
/// Update the Configuration Blackboard
// Define Configuration context using Base Offset and keep Auto Sync off to prevent access to HW
CParameterAccessContext parameterAccessContext(strError, pConfigurationBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex, uiBaseOffset);
// Access Value in the Configuration Blackboard
if (!accessValue(parameterAccessContext, strPath, strValue, bSet, strError)) {
return false;
}
/// If the Configuration is the last one applied, update the Main Blackboard as well
if (bIsLastApplied) {
// Define Main context
parameterAccessContext.setParameterBlackboard(_pMainParameterBlackboard);
// Activate the auto synchronization with the hardware
if (bSet) {
parameterAccessContext.setAutoSync(_bAutoSyncOn);
}
// Access Value in the Main Blackboard
return accessValue(parameterAccessContext, strPath, strValue, bSet, strError);
}
return true;
}
// User set/get parameters
bool CParameterMgr::accessValue(CParameterAccessContext& parameterAccessContext, const string& strPath, string& strValue, bool bSet, string& strError)
{
// Lock state
CAutoLock autoLock(&_blackboardMutex);
CPathNavigator pathNavigator(strPath);
// Nagivate through system class
if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strError)) {
parameterAccessContext.setError(strError);
return false;
}
// Do the get
return getConstSystemClass()->accessValue(pathNavigator, strValue, bSet, parameterAccessContext);
}
// Tuning mode
bool CParameterMgr::setTuningMode(bool bOn, string& strError)
{
// Tuning allowed?
if (bOn && !getConstFrameworkConfiguration()->isTuningAllowed()) {
strError = "Tuning prohibited";
return false;
}
// Lock state
CAutoLock autoLock(&_blackboardMutex);
// Warn domains about exiting tuning mode
if (!bOn && _bTuningModeIsOn) {
// Ensure application of currently selected configurations
// Force-apply configurations
doApplyConfigurations(true);
// Turn auto sync back on
_bAutoSyncOn = true;
}
// Store
_bTuningModeIsOn = bOn;
return true;
}
bool CParameterMgr::tuningModeOn() const
{
return _bTuningModeIsOn;
}
// Current value space for user set/get value interpretation
void CParameterMgr::setValueSpace(bool bIsRaw)
{
_bValueSpaceIsRaw = bIsRaw;
}
bool CParameterMgr::valueSpaceIsRaw()
{
return _bValueSpaceIsRaw;
}
// Current Output Raw Format for user get value interpretation
void CParameterMgr::setOutputRawFormat(bool bIsHex)
{
_bOutputRawFormatIsHex = bIsHex;
}
bool CParameterMgr::outputRawFormatIsHex()
{
return _bOutputRawFormatIsHex;
}
/// Sync
// Automatic hardware synchronization control (during tuning session)
bool CParameterMgr::setAutoSync(bool bAutoSyncOn, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Warn domains about turning auto sync back on
if (bAutoSyncOn && !_bAutoSyncOn) {
// Do the synchronization at system class level (could be optimized by keeping track of all modified parameters)
if (!sync(strError)) {
return false;
}
}
// Set Auto sync
_bAutoSyncOn = bAutoSyncOn;
return true;
}
bool CParameterMgr::autoSyncOn() const
{
return _bAutoSyncOn;
}
// Manual hardware synchronization control (during tuning session)
bool CParameterMgr::sync(string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Warn domains about turning auto sync back on
if (_bAutoSyncOn) {
strError = "Feature unavailable when Auto Sync is on";
return false;
}
// Get syncer set
CSyncerSet syncerSet;
// ... from system class
getConstSystemClass()->fillSyncerSet(syncerSet);
// Sync
list<string> lstrError;
if (! syncerSet.sync(*_pMainParameterBlackboard, false, &lstrError)){
CUtility::asString(lstrError, strError);
return false;
};
return true;
}
// Content dump
void CParameterMgr::logStructureContent(string& strContent) const
{
string strError;
CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex);
dumpContent(strContent, parameterAccessContext);
}
// Configuration/Domains handling
bool CParameterMgr::createDomain(const string& strName, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
return getConfigurableDomains()->createDomain(strName, strError);
}
bool CParameterMgr::deleteDomain(const string& strName, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
return getConfigurableDomains()->deleteDomain(strName, strError);
}
bool CParameterMgr::deleteAllDomains(string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
getConfigurableDomains()->deleteAllDomains();
return true;
}
bool CParameterMgr::createConfiguration(const string& strDomain, const string& strConfiguration, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
return getConfigurableDomains()->createConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, strError);
}
bool CParameterMgr::deleteConfiguration(const string& strDomain, const string& strConfiguration, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
return getConfigurableDomains()->deleteConfiguration(strDomain, strConfiguration, strError);
}
bool CParameterMgr::restoreConfiguration(const string& strDomain, const string& strConfiguration, list<string>& lstrError)
{
string strError;
// Check tuning mode
if (!checkTuningModeOn(strError)) {
lstrError.push_back(strError);
return false;
}
// Delegate to configurable domains
return getConstConfigurableDomains()->restoreConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, _bAutoSyncOn, lstrError);
}
bool CParameterMgr::saveConfiguration(const string& strDomain, const string& strConfiguration, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// Delegate to configurable domains
return getConfigurableDomains()->saveConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, strError);
}
// Configurable element - domain association
bool CParameterMgr::addConfigurableElementToDomain(const string& strDomain, const string& strConfigurableElementPath, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) {
return false;
}
// Convert element
CConfigurableElement* pConfigurableElement = static_cast<CConfigurableElement*>(pLocatedElement);
// Delegate
return getConfigurableDomains()->addConfigurableElementToDomain(strDomain, pConfigurableElement, _pMainParameterBlackboard, strError);
}
bool CParameterMgr::removeConfigurableElementFromDomain(const string& strDomain, const string& strConfigurableElementPath, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) {
return CCommandHandler::EFailed;
}
// Convert element
CConfigurableElement* pConfigurableElement = static_cast<CConfigurableElement*>(pLocatedElement);
// Delegate
return getConfigurableDomains()->removeConfigurableElementFromDomain(strDomain, pConfigurableElement, strError);
}
bool CParameterMgr::split(const string& strDomain, const string& strConfigurableElementPath, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
CElementLocator elementLocator(getSystemClass());
CElement* pLocatedElement = NULL;
if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) {
return CCommandHandler::EFailed;
}
// Convert element
CConfigurableElement* pConfigurableElement = static_cast<CConfigurableElement*>(pLocatedElement);
// Delegate
return getConfigurableDomains()->split(strDomain, pConfigurableElement, strError);
}
bool CParameterMgr::importDomainsXml(const string& strXmlSource, bool bWithSettings,
bool bFromFile, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// check path is absolute
if (bFromFile && strXmlSource[0] != '/') {
strError = "Please provide absolute path";
return false;
}
// Root element
CConfigurableDomains* pConfigurableDomains = getConfigurableDomains();
// Context
CXmlDomainSerializingContext xmlDomainSerializingContext(strError, bWithSettings);
// Selection criteria definition for rule creation
xmlDomainSerializingContext.setSelectionCriteriaDefinition(
getConstSelectionCriteria()->getSelectionCriteriaDefinition());
// Init serializing context
xmlDomainSerializingContext.set(
_pElementLibrarySet->getElementLibrary(EParameterConfigurationLibrary),
"", _strSchemaFolderLocation);
// Get Schema file associated to root element
string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" +
pConfigurableDomains->getKind() + ".xsd";
// Xml Source
CXmlDocSource* pSource;
if (bFromFile) {
// when importing from a file strXmlSource is the file name
pSource = new CXmlFileDocSource(strXmlSource, strXmlSchemaFilePath,
pConfigurableDomains->getKind(),
pConfigurableDomains->getName(), "SystemClassName");
} else {
// when importing from an xml string, strXmlSource contains the string
pSource = new CXmlStringDocSource(strXmlSource, strXmlSchemaFilePath,
pConfigurableDomains->getKind(),
pConfigurableDomains->getName(), "SystemClassName");
}
// Start clean
pConfigurableDomains->clean();
// Use a doc sink that instantiate Configurable Domains from the given doc source
CXmlMemoryDocSink memorySink(pConfigurableDomains);
bool bProcessSuccess = memorySink.process(*pSource, xmlDomainSerializingContext);
if (!bProcessSuccess) {
//Cleanup
pConfigurableDomains->clean();
} else {
// Validate domains after XML import
pConfigurableDomains->validate(_pMainParameterBlackboard);
}
delete pSource;
return bProcessSuccess;
}
bool CParameterMgr::exportDomainsXml(string& strXmlDest, bool bWithSettings, bool bToFile,
string& strError) const
{
// check path is absolute
if (bToFile && strXmlDest[0] != '/') {
strError = "Please provide absolute path";
return false;
}
// Root element
const CConfigurableDomains* pConfigurableDomains = getConstConfigurableDomains();
// Get Schema file associated to root element
string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" +
pConfigurableDomains->getKind() + ".xsd";
// Context
CXmlDomainSerializingContext xmlDomainSerializingContext(strError, bWithSettings);
// Value space
xmlDomainSerializingContext.setValueSpaceRaw(_bValueSpaceIsRaw);
// Output raw format
xmlDomainSerializingContext.setOutputRawFormat(_bOutputRawFormatIsHex);
// Use a doc source by loading data from instantiated Configurable Domains
CXmlMemoryDocSource memorySource(pConfigurableDomains, pConfigurableDomains->getKind(),
strXmlSchemaFilePath, "parameter-framework", getVersion());
// Xml Sink
CXmlDocSink* pSink;
if (bToFile) {
// Use a doc sink to write the doc data in a file
pSink = new CXmlFileDocSink(strXmlDest);
} else {
// Use a doc sink to write the doc data in a string
pSink = new CXmlStringDocSink(strXmlDest);
}
bool bProcessSuccess = pSink->process(memorySource, xmlDomainSerializingContext);
delete pSink;
return bProcessSuccess;
}
// Binary Import/Export
bool CParameterMgr::importDomainsBinary(const string& strFileName, string& strError)
{
// Check tuning mode
if (!checkTuningModeOn(strError)) {
return false;
}
// check path is absolute
if (strFileName[0] != '/') {
strError = "Please provide absolute path";
return false;
}
// Root element
CConfigurableDomains* pConfigurableDomains = getConfigurableDomains();
// Serialize in
return pConfigurableDomains->serializeSettings(strFileName, false, _uiStructureChecksum, strError);
}
bool CParameterMgr::exportDomainsBinary(const string& strFileName, string& strError)
{
// check path is absolute
if (strFileName[0] != '/') {
strError = "Please provide absolute path";
return false;
}
// Root element
CConfigurableDomains* pConfigurableDomains = getConfigurableDomains();
// Serialize out
return pConfigurableDomains->serializeSettings(strFileName, true, _uiStructureChecksum, strError);
}
// For tuning, check we're in tuning mode
bool CParameterMgr::checkTuningModeOn(string& strError) const
{
// Tuning Mode on?
if (!_bTuningModeIsOn) {
strError = "Tuning Mode must be on";
return false;
}
return true;
}
// Tuning mutex dynamic parameter handling
pthread_mutex_t* CParameterMgr::getBlackboardMutex()
{
return &_blackboardMutex;
}
// Blackboard reference (dynamic parameter handling)
CParameterBlackboard* CParameterMgr::getParameterBlackboard()
{
return _pMainParameterBlackboard;
}
// Dynamic creation library feeding
void CParameterMgr::feedElementLibraries()
{
// Global Configuration handling
CElementLibrary* pFrameworkConfigurationLibrary = new CElementLibrary;
pFrameworkConfigurationLibrary->addElementBuilder("ParameterFrameworkConfiguration", new TElementBuilderTemplate<CParameterFrameworkConfiguration>());
pFrameworkConfigurationLibrary->addElementBuilder("SubsystemPlugins", new TKindElementBuilderTemplate<CSubsystemPlugins>());
pFrameworkConfigurationLibrary->addElementBuilder("Location", new TKindElementBuilderTemplate<CPluginLocation>());
pFrameworkConfigurationLibrary->addElementBuilder("StructureDescriptionFileLocation", new TKindElementBuilderTemplate<CFrameworkConfigurationLocation>());
pFrameworkConfigurationLibrary->addElementBuilder("SettingsConfiguration", new TKindElementBuilderTemplate<CFrameworkConfigurationGroup>());
pFrameworkConfigurationLibrary->addElementBuilder("ConfigurableDomainsFileLocation", new TKindElementBuilderTemplate<CFrameworkConfigurationLocation>());
pFrameworkConfigurationLibrary->addElementBuilder("BinarySettingsFileLocation", new TKindElementBuilderTemplate<CFrameworkConfigurationLocation>());
_pElementLibrarySet->addElementLibrary(pFrameworkConfigurationLibrary);
// Parameter creation
CElementLibrary* pParameterCreationLibrary = new CElementLibrary;
pParameterCreationLibrary->addElementBuilder("Subsystem", new CSubsystemElementBuilder(getSystemClass()->getSubsystemLibrary()));
pParameterCreationLibrary->addElementBuilder("ComponentType", new TNamedElementBuilderTemplate<CComponentType>());
pParameterCreationLibrary->addElementBuilder("Component", new TNamedElementBuilderTemplate<CComponentInstance>());
pParameterCreationLibrary->addElementBuilder("BitParameter", new TNamedElementBuilderTemplate<CBitParameterType>());
pParameterCreationLibrary->addElementBuilder("BitParameterBlock", new TNamedElementBuilderTemplate<CBitParameterBlockType>());
pParameterCreationLibrary->addElementBuilder("StringParameter", new TNamedElementBuilderTemplate<CStringParameterType>());
pParameterCreationLibrary->addElementBuilder("ParameterBlock", new TNamedElementBuilderTemplate<CParameterBlockType>());
pParameterCreationLibrary->addElementBuilder("BooleanParameter", new TNamedElementBuilderTemplate<CBooleanParameterType>());
pParameterCreationLibrary->addElementBuilder("IntegerParameter", new TNamedElementBuilderTemplate<CIntegerParameterType>());
pParameterCreationLibrary->addElementBuilder("LinearAdaptation", new TElementBuilderTemplate<CLinearParameterAdaptation>());
pParameterCreationLibrary->addElementBuilder("EnumParameter", new TNamedElementBuilderTemplate<CEnumParameterType>());
pParameterCreationLibrary->addElementBuilder("ValuePair", new TElementBuilderTemplate<CEnumValuePair>());
pParameterCreationLibrary->addElementBuilder("FixedPointParameter", new TNamedElementBuilderTemplate<CFixedPointParameterType>());
pParameterCreationLibrary->addElementBuilder("SubsystemInclude", new TKindElementBuilderTemplate<CXmlFileIncluderElement>());
_pElementLibrarySet->addElementLibrary(pParameterCreationLibrary);
// Parameter Configuration Domains creation
CElementLibrary* pParameterConfigurationLibrary = new CElementLibrary;
pParameterConfigurationLibrary->addElementBuilder("ConfigurableDomain", new TNamedElementBuilderTemplate<CConfigurableDomain>());
pParameterConfigurationLibrary->addElementBuilder("Configuration", new TNamedElementBuilderTemplate<CDomainConfiguration>());
pParameterConfigurationLibrary->addElementBuilder("CompoundRule", new TElementBuilderTemplate<CCompoundRule>());
pParameterConfigurationLibrary->addElementBuilder("SelectionCriterionRule", new TElementBuilderTemplate<CSelectionCriterionRule>());
_pElementLibrarySet->addElementLibrary(pParameterConfigurationLibrary);
}
// Remote Processor Server connection handling
bool CParameterMgr::handleRemoteProcessingInterface(string& strError)
{
CAutoLog autoLog(this, "Handling remote processing interface");
// Start server if tuning allowed
if (getConstFrameworkConfiguration()->isTuningAllowed()) {
log_info("Loading remote processor library");
// Load library
_handleLibRemoteProcessor = dlopen("libremote-processor.so", RTLD_NOW);
if (!_handleLibRemoteProcessor) {
// Return error
const char* pcError = dlerror();
if (pcError) {
strError = pcError;
} else {
strError = "Unable to load libremote-processor.so library";
}
return false;
}
CreateRemoteProcessorServer pfnCreateRemoteProcessorServer = (CreateRemoteProcessorServer)dlsym(_handleLibRemoteProcessor, "createRemoteProcessorServer");
if (!pfnCreateRemoteProcessorServer) {
strError = "libremote-process.so does not contain createRemoteProcessorServer symbol.";
return false;
}
// Create server
_pRemoteProcessorServer = pfnCreateRemoteProcessorServer(getConstFrameworkConfiguration()->getServerPort(), _pCommandHandler);
log_info("Starting remote processor server on port %d", getConstFrameworkConfiguration()->getServerPort());
// Start
if (!_pRemoteProcessorServer->start()) {
ostringstream oss;
oss << "ParameterMgr: Unable to start remote processor server on port "
<< getConstFrameworkConfiguration()->getServerPort();
strError = oss.str();
return false;
}
}
return true;
}
// Back synchronization
CBackSynchronizer* CParameterMgr::createBackSynchronizer() const
{
#ifdef SIMULATION
// In simulation, back synchronization of the blackboard won't probably work
// We need to ensure though the blackboard is initialized with valid data
return new CSimulatedBackSynchronizer(getConstSystemClass(), _pMainParameterBlackboard);
#else
// Real back synchronizer from subsystems
return new CHardwareBackSynchronizer(getConstSystemClass(), _pMainParameterBlackboard);
#endif
}
// Children typwise access
CParameterFrameworkConfiguration* CParameterMgr::getFrameworkConfiguration()
{
return static_cast<CParameterFrameworkConfiguration*>(getChild(EFrameworkConfiguration));
}
const CParameterFrameworkConfiguration* CParameterMgr::getConstFrameworkConfiguration()
{
return getFrameworkConfiguration();
}
CSelectionCriteria* CParameterMgr::getSelectionCriteria()
{
return static_cast<CSelectionCriteria*>(getChild(ESelectionCriteria));
}
const CSelectionCriteria* CParameterMgr::getConstSelectionCriteria()
{
return static_cast<const CSelectionCriteria*>(getChild(ESelectionCriteria));
}
CSystemClass* CParameterMgr::getSystemClass()
{
return static_cast<CSystemClass*>(getChild(ESystemClass));
}
const CSystemClass* CParameterMgr::getConstSystemClass() const
{
return static_cast<const CSystemClass*>(getChild(ESystemClass));
}
// Configurable Domains
CConfigurableDomains* CParameterMgr::getConfigurableDomains()
{
return static_cast<CConfigurableDomains*>(getChild(EConfigurableDomains));
}
const CConfigurableDomains* CParameterMgr::getConstConfigurableDomains()
{
return static_cast<const CConfigurableDomains*>(getChild(EConfigurableDomains));
}
const CConfigurableDomains* CParameterMgr::getConstConfigurableDomains() const
{
return static_cast<const CConfigurableDomains*>(getChild(EConfigurableDomains));
}
// Apply configurations
void CParameterMgr::doApplyConfigurations(bool bForce)
{
CSyncerSet syncerSet;
// Check subsystems that need resync
getSystemClass()->checkForSubsystemsToResync(syncerSet);
// Ensure application of currently selected configurations
getConfigurableDomains()->apply(_pMainParameterBlackboard, syncerSet, bForce);
// Reset the modified status of the current criteria to indicate that a new configuration has been applied
getSelectionCriteria()->resetModifiedStatus();
}
bool CParameterMgr::getSystemClassXMLString(string& strResult)
{
// Root element
const CSystemClass* pSystemClass = getSystemClass();
string strError;
CXmlSerializingContext xmlSerializingContext(strError);
// Use a doc source by loading data from instantiated Configurable Domains
CXmlMemoryDocSource memorySource(pSystemClass, pSystemClass->getKind());
// Use a doc sink that write the doc data in a string
CXmlStringDocSink stringSink(strResult);
bool bProcessSuccess = stringSink.process(memorySource, xmlSerializingContext);
if (!bProcessSuccess) {
strResult = strError;
}
return bProcessSuccess;
}