| /* |
| * SCSI Device emulation |
| * |
| * Copyright (c) 2006 CodeSourcery. |
| * Based on code by Fabrice Bellard |
| * |
| * Written by Paul Brook |
| * |
| * This code is licenced under the LGPL. |
| * |
| * Note that this file only handles the SCSI architecture model and device |
| * commands. Emulation of interface/link layer protocols is handled by |
| * the host adapter emulator. |
| */ |
| |
| #include <qemu-common.h> |
| #include <sysemu.h> |
| //#define DEBUG_SCSI |
| |
| #ifdef DEBUG_SCSI |
| #define DPRINTF(fmt, ...) \ |
| do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while(0) |
| #endif |
| |
| #define BADF(fmt, ...) \ |
| do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0) |
| |
| #include "qemu-common.h" |
| #include "block.h" |
| #include "scsi-disk.h" |
| |
| #define SENSE_NO_SENSE 0 |
| #define SENSE_NOT_READY 2 |
| #define SENSE_HARDWARE_ERROR 4 |
| #define SENSE_ILLEGAL_REQUEST 5 |
| |
| #define STATUS_GOOD 0 |
| #define STATUS_CHECK_CONDITION 2 |
| |
| #define SCSI_DMA_BUF_SIZE 131072 |
| #define SCSI_MAX_INQUIRY_LEN 256 |
| |
| #define SCSI_REQ_STATUS_RETRY 0x01 |
| |
| typedef struct SCSIRequest { |
| SCSIDeviceState *dev; |
| uint32_t tag; |
| /* ??? We should probably keep track of whether the data transfer is |
| a read or a write. Currently we rely on the host getting it right. */ |
| /* Both sector and sector_count are in terms of qemu 512 byte blocks. */ |
| uint64_t sector; |
| uint32_t sector_count; |
| struct iovec iov; |
| QEMUIOVector qiov; |
| BlockDriverAIOCB *aiocb; |
| struct SCSIRequest *next; |
| uint32_t status; |
| } SCSIRequest; |
| |
| struct SCSIDeviceState |
| { |
| BlockDriverState *bdrv; |
| SCSIRequest *requests; |
| /* The qemu block layer uses a fixed 512 byte sector size. |
| This is the number of 512 byte blocks in a single scsi sector. */ |
| int cluster_size; |
| uint64_t max_lba; |
| int sense; |
| int tcq; |
| /* Completion functions may be called from either scsi_{read,write}_data |
| or from the AIO completion routines. */ |
| scsi_completionfn completion; |
| void *opaque; |
| char drive_serial_str[21]; |
| }; |
| |
| /* Global pool of SCSIRequest structures. */ |
| static SCSIRequest *free_requests = NULL; |
| |
| static SCSIRequest *scsi_new_request(SCSIDeviceState *s, uint32_t tag) |
| { |
| SCSIRequest *r; |
| |
| if (free_requests) { |
| r = free_requests; |
| free_requests = r->next; |
| } else { |
| r = qemu_malloc(sizeof(SCSIRequest)); |
| r->iov.iov_base = qemu_memalign(512, SCSI_DMA_BUF_SIZE); |
| } |
| r->dev = s; |
| r->tag = tag; |
| r->sector_count = 0; |
| r->iov.iov_len = 0; |
| r->aiocb = NULL; |
| r->status = 0; |
| |
| r->next = s->requests; |
| s->requests = r; |
| return r; |
| } |
| |
| static void scsi_remove_request(SCSIRequest *r) |
| { |
| SCSIRequest *last; |
| SCSIDeviceState *s = r->dev; |
| |
| if (s->requests == r) { |
| s->requests = r->next; |
| } else { |
| last = s->requests; |
| while (last && last->next != r) |
| last = last->next; |
| if (last) { |
| last->next = r->next; |
| } else { |
| BADF("Orphaned request\n"); |
| } |
| } |
| r->next = free_requests; |
| free_requests = r; |
| } |
| |
| static SCSIRequest *scsi_find_request(SCSIDeviceState *s, uint32_t tag) |
| { |
| SCSIRequest *r; |
| |
| r = s->requests; |
| while (r && r->tag != tag) |
| r = r->next; |
| |
| return r; |
| } |
| |
| /* Helper function for command completion. */ |
| static void scsi_command_complete(SCSIRequest *r, int status, int sense) |
| { |
| SCSIDeviceState *s = r->dev; |
| uint32_t tag; |
| DPRINTF("Command complete tag=0x%x status=%d sense=%d\n", r->tag, status, sense); |
| s->sense = sense; |
| tag = r->tag; |
| scsi_remove_request(r); |
| s->completion(s->opaque, SCSI_REASON_DONE, tag, status); |
| } |
| |
| /* Cancel a pending data transfer. */ |
| static void scsi_cancel_io(SCSIDevice *d, uint32_t tag) |
| { |
| SCSIDeviceState *s = d->state; |
| SCSIRequest *r; |
| DPRINTF("Cancel tag=0x%x\n", tag); |
| r = scsi_find_request(s, tag); |
| if (r) { |
| if (r->aiocb) |
| bdrv_aio_cancel(r->aiocb); |
| r->aiocb = NULL; |
| scsi_remove_request(r); |
| } |
| } |
| |
| static void scsi_read_complete(void * opaque, int ret) |
| { |
| SCSIRequest *r = (SCSIRequest *)opaque; |
| SCSIDeviceState *s = r->dev; |
| |
| if (ret) { |
| DPRINTF("IO error\n"); |
| s->completion(s->opaque, SCSI_REASON_DATA, r->tag, 0); |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NO_SENSE); |
| return; |
| } |
| DPRINTF("Data ready tag=0x%x len=%d\n", r->tag, r->iov.iov_len); |
| |
| s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->iov.iov_len); |
| } |
| |
| /* Read more data from scsi device into buffer. */ |
| static void scsi_read_data(SCSIDevice *d, uint32_t tag) |
| { |
| SCSIDeviceState *s = d->state; |
| SCSIRequest *r; |
| uint32_t n; |
| |
| r = scsi_find_request(s, tag); |
| if (!r) { |
| BADF("Bad read tag 0x%x\n", tag); |
| /* ??? This is the wrong error. */ |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR); |
| return; |
| } |
| if (r->sector_count == (uint32_t)-1) { |
| DPRINTF("Read buf_len=%d\n", r->iov.iov_len); |
| r->sector_count = 0; |
| s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->iov.iov_len); |
| return; |
| } |
| DPRINTF("Read sector_count=%d\n", r->sector_count); |
| if (r->sector_count == 0) { |
| scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE); |
| return; |
| } |
| |
| n = r->sector_count; |
| if (n > SCSI_DMA_BUF_SIZE / 512) |
| n = SCSI_DMA_BUF_SIZE / 512; |
| |
| r->iov.iov_len = n * 512; |
| qemu_iovec_init_external(&r->qiov, &r->iov, 1); |
| r->aiocb = bdrv_aio_readv(s->bdrv, r->sector, &r->qiov, n, |
| scsi_read_complete, r); |
| if (r->aiocb == NULL) |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR); |
| r->sector += n; |
| r->sector_count -= n; |
| } |
| |
| static int scsi_handle_write_error(SCSIRequest *r, int error) |
| { |
| BlockInterfaceErrorAction action = drive_get_onerror(r->dev->bdrv); |
| |
| if (action == BLOCK_ERR_IGNORE) |
| return 0; |
| |
| if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC) |
| || action == BLOCK_ERR_STOP_ANY) { |
| r->status |= SCSI_REQ_STATUS_RETRY; |
| vm_stop(0); |
| } else { |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, |
| SENSE_HARDWARE_ERROR); |
| } |
| |
| return 1; |
| } |
| |
| static void scsi_write_complete(void * opaque, int ret) |
| { |
| SCSIRequest *r = (SCSIRequest *)opaque; |
| SCSIDeviceState *s = r->dev; |
| uint32_t len; |
| uint32_t n; |
| |
| r->aiocb = NULL; |
| |
| if (ret) { |
| if (scsi_handle_write_error(r, -ret)) |
| return; |
| } |
| |
| n = r->iov.iov_len / 512; |
| r->sector += n; |
| r->sector_count -= n; |
| if (r->sector_count == 0) { |
| scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE); |
| } else { |
| len = r->sector_count * 512; |
| if (len > SCSI_DMA_BUF_SIZE) { |
| len = SCSI_DMA_BUF_SIZE; |
| } |
| r->iov.iov_len = len; |
| DPRINTF("Write complete tag=0x%x more=%d\n", r->tag, len); |
| s->completion(s->opaque, SCSI_REASON_DATA, r->tag, len); |
| } |
| } |
| |
| static void scsi_write_request(SCSIRequest *r) |
| { |
| SCSIDeviceState *s = r->dev; |
| uint32_t n; |
| |
| n = r->iov.iov_len / 512; |
| if (n) { |
| qemu_iovec_init_external(&r->qiov, &r->iov, 1); |
| r->aiocb = bdrv_aio_writev(s->bdrv, r->sector, &r->qiov, n, |
| scsi_write_complete, r); |
| if (r->aiocb == NULL) |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, |
| SENSE_HARDWARE_ERROR); |
| } else { |
| /* Invoke completion routine to fetch data from host. */ |
| scsi_write_complete(r, 0); |
| } |
| } |
| |
| /* Write data to a scsi device. Returns nonzero on failure. |
| The transfer may complete asynchronously. */ |
| static int scsi_write_data(SCSIDevice *d, uint32_t tag) |
| { |
| SCSIDeviceState *s = d->state; |
| SCSIRequest *r; |
| |
| DPRINTF("Write data tag=0x%x\n", tag); |
| r = scsi_find_request(s, tag); |
| if (!r) { |
| BADF("Bad write tag 0x%x\n", tag); |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR); |
| return 1; |
| } |
| |
| if (r->aiocb) |
| BADF("Data transfer already in progress\n"); |
| |
| scsi_write_request(r); |
| |
| return 0; |
| } |
| |
| static void scsi_dma_restart_cb(void *opaque, int running, int reason) |
| { |
| SCSIDeviceState *s = opaque; |
| SCSIRequest *r = s->requests; |
| if (!running) |
| return; |
| |
| while (r) { |
| if (r->status & SCSI_REQ_STATUS_RETRY) { |
| r->status &= ~SCSI_REQ_STATUS_RETRY; |
| scsi_write_request(r); |
| } |
| r = r->next; |
| } |
| } |
| |
| /* Return a pointer to the data buffer. */ |
| static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag) |
| { |
| SCSIDeviceState *s = d->state; |
| SCSIRequest *r; |
| |
| r = scsi_find_request(s, tag); |
| if (!r) { |
| BADF("Bad buffer tag 0x%x\n", tag); |
| return NULL; |
| } |
| return (uint8_t *)r->iov.iov_base; |
| } |
| |
| /* Execute a scsi command. Returns the length of the data expected by the |
| command. This will be Positive for data transfers from the device |
| (eg. disk reads), negative for transfers to the device (eg. disk writes), |
| and zero if the command does not transfer any data. */ |
| |
| static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag, |
| uint8_t *buf, int lun) |
| { |
| SCSIDeviceState *s = d->state; |
| uint64_t nb_sectors; |
| uint64_t lba; |
| uint32_t len; |
| int cmdlen; |
| int is_write; |
| uint8_t command; |
| uint8_t *outbuf; |
| SCSIRequest *r; |
| |
| command = buf[0]; |
| r = scsi_find_request(s, tag); |
| if (r) { |
| BADF("Tag 0x%x already in use\n", tag); |
| scsi_cancel_io(d, tag); |
| } |
| /* ??? Tags are not unique for different luns. We only implement a |
| single lun, so this should not matter. */ |
| r = scsi_new_request(s, tag); |
| outbuf = (uint8_t *)r->iov.iov_base; |
| is_write = 0; |
| DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]); |
| switch (command >> 5) { |
| case 0: |
| lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) | |
| (((uint64_t) buf[1] & 0x1f) << 16); |
| len = buf[4]; |
| cmdlen = 6; |
| break; |
| case 1: |
| case 2: |
| lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
| ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
| len = buf[8] | (buf[7] << 8); |
| cmdlen = 10; |
| break; |
| case 4: |
| lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) | |
| ((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) | |
| ((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) | |
| ((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56); |
| len = buf[13] | (buf[12] << 8) | (buf[11] << 16) | (buf[10] << 24); |
| cmdlen = 16; |
| break; |
| case 5: |
| lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
| ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
| len = buf[9] | (buf[8] << 8) | (buf[7] << 16) | (buf[6] << 24); |
| cmdlen = 12; |
| break; |
| default: |
| BADF("Unsupported command length, command %x\n", command); |
| goto fail; |
| } |
| #ifdef DEBUG_SCSI |
| { |
| int i; |
| for (i = 1; i < cmdlen; i++) { |
| printf(" 0x%02x", buf[i]); |
| } |
| printf("\n"); |
| } |
| #endif |
| if (lun || buf[1] >> 5) { |
| /* Only LUN 0 supported. */ |
| DPRINTF("Unimplemented LUN %d\n", lun ? lun : buf[1] >> 5); |
| if (command != 0x03 && command != 0x12) /* REQUEST SENSE and INQUIRY */ |
| goto fail; |
| } |
| switch (command) { |
| case 0x0: |
| DPRINTF("Test Unit Ready\n"); |
| if (!bdrv_is_inserted(s->bdrv)) |
| goto notready; |
| break; |
| case 0x03: |
| DPRINTF("Request Sense (len %d)\n", len); |
| if (len < 4) |
| goto fail; |
| memset(outbuf, 0, 4); |
| r->iov.iov_len = 4; |
| if (s->sense == SENSE_NOT_READY && len >= 18) { |
| memset(outbuf, 0, 18); |
| r->iov.iov_len = 18; |
| outbuf[7] = 10; |
| /* asc 0x3a, ascq 0: Medium not present */ |
| outbuf[12] = 0x3a; |
| outbuf[13] = 0; |
| } |
| outbuf[0] = 0xf0; |
| outbuf[1] = 0; |
| outbuf[2] = s->sense; |
| break; |
| case 0x12: |
| DPRINTF("Inquiry (len %d)\n", len); |
| if (buf[1] & 0x2) { |
| /* Command support data - optional, not implemented */ |
| BADF("optional INQUIRY command support request not implemented\n"); |
| goto fail; |
| } |
| else if (buf[1] & 0x1) { |
| /* Vital product data */ |
| uint8_t page_code = buf[2]; |
| if (len < 4) { |
| BADF("Error: Inquiry (EVPD[%02X]) buffer size %d is " |
| "less than 4\n", page_code, len); |
| goto fail; |
| } |
| |
| switch (page_code) { |
| case 0x00: |
| { |
| /* Supported page codes, mandatory */ |
| DPRINTF("Inquiry EVPD[Supported pages] " |
| "buffer size %d\n", len); |
| |
| r->iov.iov_len = 0; |
| |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| outbuf[r->iov.iov_len++] = 5; |
| } else { |
| outbuf[r->iov.iov_len++] = 0; |
| } |
| |
| outbuf[r->iov.iov_len++] = 0x00; // this page |
| outbuf[r->iov.iov_len++] = 0x00; |
| outbuf[r->iov.iov_len++] = 3; // number of pages |
| outbuf[r->iov.iov_len++] = 0x00; // list of supported pages (this page) |
| outbuf[r->iov.iov_len++] = 0x80; // unit serial number |
| outbuf[r->iov.iov_len++] = 0x83; // device identification |
| } |
| break; |
| case 0x80: |
| { |
| int l; |
| |
| /* Device serial number, optional */ |
| if (len < 4) { |
| BADF("Error: EVPD[Serial number] Inquiry buffer " |
| "size %d too small, %d needed\n", len, 4); |
| goto fail; |
| } |
| |
| DPRINTF("Inquiry EVPD[Serial number] buffer size %d\n", len); |
| l = MIN(len, strlen(s->drive_serial_str)); |
| |
| r->iov.iov_len = 0; |
| |
| /* Supported page codes */ |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| outbuf[r->iov.iov_len++] = 5; |
| } else { |
| outbuf[r->iov.iov_len++] = 0; |
| } |
| |
| outbuf[r->iov.iov_len++] = 0x80; // this page |
| outbuf[r->iov.iov_len++] = 0x00; |
| outbuf[r->iov.iov_len++] = l; |
| memcpy(&outbuf[r->iov.iov_len], s->drive_serial_str, l); |
| r->iov.iov_len += l; |
| } |
| |
| break; |
| case 0x83: |
| { |
| /* Device identification page, mandatory */ |
| int max_len = 255 - 8; |
| int id_len = strlen(bdrv_get_device_name(s->bdrv)); |
| if (id_len > max_len) |
| id_len = max_len; |
| |
| DPRINTF("Inquiry EVPD[Device identification] " |
| "buffer size %d\n", len); |
| r->iov.iov_len = 0; |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| outbuf[r->iov.iov_len++] = 5; |
| } else { |
| outbuf[r->iov.iov_len++] = 0; |
| } |
| |
| outbuf[r->iov.iov_len++] = 0x83; // this page |
| outbuf[r->iov.iov_len++] = 0x00; |
| outbuf[r->iov.iov_len++] = 3 + id_len; |
| |
| outbuf[r->iov.iov_len++] = 0x2; // ASCII |
| outbuf[r->iov.iov_len++] = 0; // not officially assigned |
| outbuf[r->iov.iov_len++] = 0; // reserved |
| outbuf[r->iov.iov_len++] = id_len; // length of data following |
| |
| memcpy(&outbuf[r->iov.iov_len], |
| bdrv_get_device_name(s->bdrv), id_len); |
| r->iov.iov_len += id_len; |
| } |
| break; |
| default: |
| BADF("Error: unsupported Inquiry (EVPD[%02X]) " |
| "buffer size %d\n", page_code, len); |
| goto fail; |
| } |
| /* done with EVPD */ |
| break; |
| } |
| else { |
| /* Standard INQUIRY data */ |
| if (buf[2] != 0) { |
| BADF("Error: Inquiry (STANDARD) page or code " |
| "is non-zero [%02X]\n", buf[2]); |
| goto fail; |
| } |
| |
| /* PAGE CODE == 0 */ |
| if (len < 5) { |
| BADF("Error: Inquiry (STANDARD) buffer size %d " |
| "is less than 5\n", len); |
| goto fail; |
| } |
| |
| if (len < 36) { |
| BADF("Error: Inquiry (STANDARD) buffer size %d " |
| "is less than 36 (TODO: only 5 required)\n", len); |
| } |
| } |
| |
| if(len > SCSI_MAX_INQUIRY_LEN) |
| len = SCSI_MAX_INQUIRY_LEN; |
| |
| memset(outbuf, 0, len); |
| |
| if (lun || buf[1] >> 5) { |
| outbuf[0] = 0x7f; /* LUN not supported */ |
| } else if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| outbuf[0] = 5; |
| outbuf[1] = 0x80; |
| memcpy(&outbuf[16], "QEMU CD-ROM ", 16); |
| } else { |
| outbuf[0] = 0; |
| memcpy(&outbuf[16], "QEMU HARDDISK ", 16); |
| } |
| memcpy(&outbuf[8], "QEMU ", 8); |
| memcpy(&outbuf[32], QEMU_VERSION, 4); |
| /* Identify device as SCSI-3 rev 1. |
| Some later commands are also implemented. */ |
| outbuf[2] = 3; |
| outbuf[3] = 2; /* Format 2 */ |
| outbuf[4] = len - 5; /* Additional Length = (Len - 1) - 4 */ |
| /* Sync data transfer and TCQ. */ |
| outbuf[7] = 0x10 | (s->tcq ? 0x02 : 0); |
| r->iov.iov_len = len; |
| break; |
| case 0x16: |
| DPRINTF("Reserve(6)\n"); |
| if (buf[1] & 1) |
| goto fail; |
| break; |
| case 0x17: |
| DPRINTF("Release(6)\n"); |
| if (buf[1] & 1) |
| goto fail; |
| break; |
| case 0x1a: |
| case 0x5a: |
| { |
| uint8_t *p; |
| int page; |
| |
| page = buf[2] & 0x3f; |
| DPRINTF("Mode Sense (page %d, len %d)\n", page, len); |
| p = outbuf; |
| memset(p, 0, 4); |
| outbuf[1] = 0; /* Default media type. */ |
| outbuf[3] = 0; /* Block descriptor length. */ |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| outbuf[2] = 0x80; /* Readonly. */ |
| } |
| p += 4; |
| if (page == 4) { |
| int cylinders, heads, secs; |
| |
| /* Rigid disk device geometry page. */ |
| p[0] = 4; |
| p[1] = 0x16; |
| /* if a geometry hint is available, use it */ |
| bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs); |
| p[2] = (cylinders >> 16) & 0xff; |
| p[3] = (cylinders >> 8) & 0xff; |
| p[4] = cylinders & 0xff; |
| p[5] = heads & 0xff; |
| /* Write precomp start cylinder, disabled */ |
| p[6] = (cylinders >> 16) & 0xff; |
| p[7] = (cylinders >> 8) & 0xff; |
| p[8] = cylinders & 0xff; |
| /* Reduced current start cylinder, disabled */ |
| p[9] = (cylinders >> 16) & 0xff; |
| p[10] = (cylinders >> 8) & 0xff; |
| p[11] = cylinders & 0xff; |
| /* Device step rate [ns], 200ns */ |
| p[12] = 0; |
| p[13] = 200; |
| /* Landing zone cylinder */ |
| p[14] = 0xff; |
| p[15] = 0xff; |
| p[16] = 0xff; |
| /* Medium rotation rate [rpm], 5400 rpm */ |
| p[20] = (5400 >> 8) & 0xff; |
| p[21] = 5400 & 0xff; |
| p += 0x16; |
| } else if (page == 5) { |
| int cylinders, heads, secs; |
| |
| /* Flexible disk device geometry page. */ |
| p[0] = 5; |
| p[1] = 0x1e; |
| /* Transfer rate [kbit/s], 5Mbit/s */ |
| p[2] = 5000 >> 8; |
| p[3] = 5000 & 0xff; |
| /* if a geometry hint is available, use it */ |
| bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs); |
| p[4] = heads & 0xff; |
| p[5] = secs & 0xff; |
| p[6] = s->cluster_size * 2; |
| p[8] = (cylinders >> 8) & 0xff; |
| p[9] = cylinders & 0xff; |
| /* Write precomp start cylinder, disabled */ |
| p[10] = (cylinders >> 8) & 0xff; |
| p[11] = cylinders & 0xff; |
| /* Reduced current start cylinder, disabled */ |
| p[12] = (cylinders >> 8) & 0xff; |
| p[13] = cylinders & 0xff; |
| /* Device step rate [100us], 100us */ |
| p[14] = 0; |
| p[15] = 1; |
| /* Device step pulse width [us], 1us */ |
| p[16] = 1; |
| /* Device head settle delay [100us], 100us */ |
| p[17] = 0; |
| p[18] = 1; |
| /* Motor on delay [0.1s], 0.1s */ |
| p[19] = 1; |
| /* Motor off delay [0.1s], 0.1s */ |
| p[20] = 1; |
| /* Medium rotation rate [rpm], 5400 rpm */ |
| p[28] = (5400 >> 8) & 0xff; |
| p[29] = 5400 & 0xff; |
| p += 0x1e; |
| } else if ((page == 8 || page == 0x3f)) { |
| /* Caching page. */ |
| memset(p,0,20); |
| p[0] = 8; |
| p[1] = 0x12; |
| p[2] = 4; /* WCE */ |
| p += 20; |
| } |
| if ((page == 0x3f || page == 0x2a) |
| && (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM)) { |
| /* CD Capabilities and Mechanical Status page. */ |
| p[0] = 0x2a; |
| p[1] = 0x14; |
| p[2] = 3; // CD-R & CD-RW read |
| p[3] = 0; // Writing not supported |
| p[4] = 0x7f; /* Audio, composite, digital out, |
| mode 2 form 1&2, multi session */ |
| p[5] = 0xff; /* CD DA, DA accurate, RW supported, |
| RW corrected, C2 errors, ISRC, |
| UPC, Bar code */ |
| p[6] = 0x2d | (bdrv_is_locked(s->bdrv)? 2 : 0); |
| /* Locking supported, jumper present, eject, tray */ |
| p[7] = 0; /* no volume & mute control, no |
| changer */ |
| p[8] = (50 * 176) >> 8; // 50x read speed |
| p[9] = (50 * 176) & 0xff; |
| p[10] = 0 >> 8; // No volume |
| p[11] = 0 & 0xff; |
| p[12] = 2048 >> 8; // 2M buffer |
| p[13] = 2048 & 0xff; |
| p[14] = (16 * 176) >> 8; // 16x read speed current |
| p[15] = (16 * 176) & 0xff; |
| p[18] = (16 * 176) >> 8; // 16x write speed |
| p[19] = (16 * 176) & 0xff; |
| p[20] = (16 * 176) >> 8; // 16x write speed current |
| p[21] = (16 * 176) & 0xff; |
| p += 22; |
| } |
| r->iov.iov_len = p - outbuf; |
| outbuf[0] = r->iov.iov_len - 4; |
| if (r->iov.iov_len > len) |
| r->iov.iov_len = len; |
| } |
| break; |
| case 0x1b: |
| DPRINTF("Start Stop Unit\n"); |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM && |
| (buf[4] & 2)) |
| /* load/eject medium */ |
| bdrv_eject(s->bdrv, !(buf[4] & 1)); |
| break; |
| case 0x1e: |
| DPRINTF("Prevent Allow Medium Removal (prevent = %d)\n", buf[4] & 3); |
| bdrv_set_locked(s->bdrv, buf[4] & 1); |
| break; |
| case 0x25: |
| DPRINTF("Read Capacity\n"); |
| /* The normal LEN field for this command is zero. */ |
| memset(outbuf, 0, 8); |
| bdrv_get_geometry(s->bdrv, &nb_sectors); |
| nb_sectors /= s->cluster_size; |
| /* Returned value is the address of the last sector. */ |
| if (nb_sectors) { |
| nb_sectors--; |
| /* Remember the new size for read/write sanity checking. */ |
| s->max_lba = nb_sectors; |
| /* Clip to 2TB, instead of returning capacity modulo 2TB. */ |
| if (nb_sectors > UINT32_MAX) |
| nb_sectors = UINT32_MAX; |
| outbuf[0] = (nb_sectors >> 24) & 0xff; |
| outbuf[1] = (nb_sectors >> 16) & 0xff; |
| outbuf[2] = (nb_sectors >> 8) & 0xff; |
| outbuf[3] = nb_sectors & 0xff; |
| outbuf[4] = 0; |
| outbuf[5] = 0; |
| outbuf[6] = s->cluster_size * 2; |
| outbuf[7] = 0; |
| r->iov.iov_len = 8; |
| } else { |
| notready: |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NOT_READY); |
| return 0; |
| } |
| break; |
| case 0x08: |
| case 0x28: |
| case 0x88: |
| DPRINTF("Read (sector %lld, count %d)\n", lba, len); |
| if (lba > s->max_lba) |
| goto illegal_lba; |
| r->sector = lba * s->cluster_size; |
| r->sector_count = len * s->cluster_size; |
| break; |
| case 0x0a: |
| case 0x2a: |
| case 0x8a: |
| DPRINTF("Write (sector %lld, count %d)\n", lba, len); |
| if (lba > s->max_lba) |
| goto illegal_lba; |
| r->sector = lba * s->cluster_size; |
| r->sector_count = len * s->cluster_size; |
| is_write = 1; |
| break; |
| case 0x35: |
| DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len); |
| bdrv_flush(s->bdrv); |
| break; |
| case 0x43: |
| { |
| int start_track, format, msf, toclen; |
| |
| msf = buf[1] & 2; |
| format = buf[2] & 0xf; |
| start_track = buf[6]; |
| bdrv_get_geometry(s->bdrv, &nb_sectors); |
| DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1); |
| nb_sectors /= s->cluster_size; |
| switch(format) { |
| case 0: |
| toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track); |
| break; |
| case 1: |
| /* multi session : only a single session defined */ |
| toclen = 12; |
| memset(outbuf, 0, 12); |
| outbuf[1] = 0x0a; |
| outbuf[2] = 0x01; |
| outbuf[3] = 0x01; |
| break; |
| case 2: |
| toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track); |
| break; |
| default: |
| goto error_cmd; |
| } |
| if (toclen > 0) { |
| if (len > toclen) |
| len = toclen; |
| r->iov.iov_len = len; |
| break; |
| } |
| error_cmd: |
| DPRINTF("Read TOC error\n"); |
| goto fail; |
| } |
| case 0x46: |
| DPRINTF("Get Configuration (rt %d, maxlen %d)\n", buf[1] & 3, len); |
| memset(outbuf, 0, 8); |
| /* ??? This should probably return much more information. For now |
| just return the basic header indicating the CD-ROM profile. */ |
| outbuf[7] = 8; // CD-ROM |
| r->iov.iov_len = 8; |
| break; |
| case 0x56: |
| DPRINTF("Reserve(10)\n"); |
| if (buf[1] & 3) |
| goto fail; |
| break; |
| case 0x57: |
| DPRINTF("Release(10)\n"); |
| if (buf[1] & 3) |
| goto fail; |
| break; |
| case 0x9e: |
| /* Service Action In subcommands. */ |
| if ((buf[1] & 31) == 0x10) { |
| DPRINTF("SAI READ CAPACITY(16)\n"); |
| memset(outbuf, 0, len); |
| bdrv_get_geometry(s->bdrv, &nb_sectors); |
| nb_sectors /= s->cluster_size; |
| /* Returned value is the address of the last sector. */ |
| if (nb_sectors) { |
| nb_sectors--; |
| /* Remember the new size for read/write sanity checking. */ |
| s->max_lba = nb_sectors; |
| outbuf[0] = (nb_sectors >> 56) & 0xff; |
| outbuf[1] = (nb_sectors >> 48) & 0xff; |
| outbuf[2] = (nb_sectors >> 40) & 0xff; |
| outbuf[3] = (nb_sectors >> 32) & 0xff; |
| outbuf[4] = (nb_sectors >> 24) & 0xff; |
| outbuf[5] = (nb_sectors >> 16) & 0xff; |
| outbuf[6] = (nb_sectors >> 8) & 0xff; |
| outbuf[7] = nb_sectors & 0xff; |
| outbuf[8] = 0; |
| outbuf[9] = 0; |
| outbuf[10] = s->cluster_size * 2; |
| outbuf[11] = 0; |
| /* Protection, exponent and lowest lba field left blank. */ |
| r->iov.iov_len = len; |
| } else { |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NOT_READY); |
| return 0; |
| } |
| break; |
| } |
| DPRINTF("Unsupported Service Action In\n"); |
| goto fail; |
| case 0xa0: |
| DPRINTF("Report LUNs (len %d)\n", len); |
| if (len < 16) |
| goto fail; |
| memset(outbuf, 0, 16); |
| outbuf[3] = 8; |
| r->iov.iov_len = 16; |
| break; |
| case 0x2f: |
| DPRINTF("Verify (sector %d, count %d)\n", lba, len); |
| break; |
| default: |
| DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]); |
| fail: |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_ILLEGAL_REQUEST); |
| return 0; |
| illegal_lba: |
| scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR); |
| return 0; |
| } |
| if (r->sector_count == 0 && r->iov.iov_len == 0) { |
| scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE); |
| } |
| len = r->sector_count * 512 + r->iov.iov_len; |
| if (is_write) { |
| return -len; |
| } else { |
| if (!r->sector_count) |
| r->sector_count = -1; |
| return len; |
| } |
| } |
| |
| static void scsi_destroy(SCSIDevice *d) |
| { |
| qemu_free(d->state); |
| qemu_free(d); |
| } |
| |
| SCSIDevice *scsi_disk_init(BlockDriverState *bdrv, int tcq, |
| scsi_completionfn completion, void *opaque) |
| { |
| SCSIDevice *d; |
| SCSIDeviceState *s; |
| uint64_t nb_sectors; |
| |
| s = (SCSIDeviceState *)qemu_mallocz(sizeof(SCSIDeviceState)); |
| s->bdrv = bdrv; |
| s->tcq = tcq; |
| s->completion = completion; |
| s->opaque = opaque; |
| if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) { |
| s->cluster_size = 4; |
| } else { |
| s->cluster_size = 1; |
| } |
| bdrv_get_geometry(s->bdrv, &nb_sectors); |
| nb_sectors /= s->cluster_size; |
| if (nb_sectors) |
| nb_sectors--; |
| s->max_lba = nb_sectors; |
| strncpy(s->drive_serial_str, drive_get_serial(s->bdrv), |
| sizeof(s->drive_serial_str)); |
| if (strlen(s->drive_serial_str) == 0) |
| pstrcpy(s->drive_serial_str, sizeof(s->drive_serial_str), "0"); |
| qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s); |
| d = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice)); |
| d->state = s; |
| d->destroy = scsi_destroy; |
| d->send_command = scsi_send_command; |
| d->read_data = scsi_read_data; |
| d->write_data = scsi_write_data; |
| d->cancel_io = scsi_cancel_io; |
| d->get_buf = scsi_get_buf; |
| |
| return d; |
| } |