| /* Copyright (C) 2007-2008 The Android Open Source Project |
| ** |
| ** This software is licensed under the terms of the GNU General Public |
| ** License version 2, as published by the Free Software Foundation, and |
| ** may be copied, distributed, and modified under those terms. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| */ |
| #include "qemu-common.h" |
| #include "qemu-timer.h" |
| #include "cpu.h" |
| #include "arm_pic.h" |
| #include "goldfish_device.h" |
| #include "hw/hw.h" |
| |
| enum { |
| TIMER_TIME_LOW = 0x00, // get low bits of current time and update TIMER_TIME_HIGH |
| TIMER_TIME_HIGH = 0x04, // get high bits of time at last TIMER_TIME_LOW read |
| TIMER_ALARM_LOW = 0x08, // set low bits of alarm and activate it |
| TIMER_ALARM_HIGH = 0x0c, // set high bits of next alarm |
| TIMER_CLEAR_INTERRUPT = 0x10, |
| TIMER_CLEAR_ALARM = 0x14 |
| }; |
| |
| struct timer_state { |
| struct goldfish_device dev; |
| uint32_t alarm_low_ns; |
| int32_t alarm_high_ns; |
| int64_t now_ns; |
| int armed; |
| QEMUTimer *timer; |
| }; |
| |
| /* Converts nanoseconds into ticks */ |
| static int64_t ns2tks(int64_t ns) { |
| return muldiv64(ns, get_ticks_per_sec(), 1000000000); |
| } |
| |
| /* Converts ticks into nanoseconds */ |
| static int64_t tks2ns(int64_t tks) { |
| return muldiv64(tks, 1000000000, get_ticks_per_sec()); |
| } |
| |
| #define GOLDFISH_TIMER_SAVE_VERSION 1 |
| |
| static void goldfish_timer_save(QEMUFile* f, void* opaque) |
| { |
| struct timer_state* s = opaque; |
| |
| qemu_put_be64(f, s->now_ns); /* in case the kernel is in the middle of a timer read */ |
| qemu_put_byte(f, s->armed); |
| if (s->armed) { |
| int64_t now_tks = qemu_get_clock(vm_clock); |
| int64_t alarm_tks = ns2tks(s->alarm_low_ns | (int64_t)s->alarm_high_ns << 32); |
| qemu_put_be64(f, alarm_tks - now_tks); |
| } |
| } |
| |
| static int goldfish_timer_load(QEMUFile* f, void* opaque, int version_id) |
| { |
| struct timer_state* s = opaque; |
| |
| if (version_id != GOLDFISH_TIMER_SAVE_VERSION) |
| return -1; |
| |
| s->now_ns = qemu_get_be64(f); |
| s->armed = qemu_get_byte(f); |
| if (s->armed) { |
| int64_t now_tks = qemu_get_clock(vm_clock); |
| int64_t diff_tks = qemu_get_be64(f); |
| int64_t alarm_tks = now_tks + diff_tks; |
| |
| if (alarm_tks <= now_tks) { |
| goldfish_device_set_irq(&s->dev, 0, 1); |
| s->armed = 0; |
| } else { |
| qemu_mod_timer(s->timer, alarm_tks); |
| } |
| } |
| return 0; |
| } |
| |
| static uint32_t goldfish_timer_read(void *opaque, target_phys_addr_t offset) |
| { |
| struct timer_state *s = (struct timer_state *)opaque; |
| switch(offset) { |
| case TIMER_TIME_LOW: |
| s->now_ns = tks2ns(qemu_get_clock(vm_clock)); |
| return s->now_ns; |
| case TIMER_TIME_HIGH: |
| return s->now_ns >> 32; |
| default: |
| cpu_abort (cpu_single_env, "goldfish_timer_read: Bad offset %x\n", offset); |
| return 0; |
| } |
| } |
| |
| static void goldfish_timer_write(void *opaque, target_phys_addr_t offset, uint32_t value_ns) |
| { |
| struct timer_state *s = (struct timer_state *)opaque; |
| int64_t alarm_tks, now_tks; |
| switch(offset) { |
| case TIMER_ALARM_LOW: |
| s->alarm_low_ns = value_ns; |
| alarm_tks = ns2tks(s->alarm_low_ns | (int64_t)s->alarm_high_ns << 32); |
| now_tks = qemu_get_clock(vm_clock); |
| if (alarm_tks <= now_tks) { |
| goldfish_device_set_irq(&s->dev, 0, 1); |
| } else { |
| qemu_mod_timer(s->timer, alarm_tks); |
| s->armed = 1; |
| } |
| break; |
| case TIMER_ALARM_HIGH: |
| s->alarm_high_ns = value_ns; |
| break; |
| case TIMER_CLEAR_ALARM: |
| qemu_del_timer(s->timer); |
| s->armed = 0; |
| /* fall through */ |
| case TIMER_CLEAR_INTERRUPT: |
| goldfish_device_set_irq(&s->dev, 0, 0); |
| break; |
| default: |
| cpu_abort (cpu_single_env, "goldfish_timer_write: Bad offset %x\n", offset); |
| } |
| } |
| |
| static void goldfish_timer_tick(void *opaque) |
| { |
| struct timer_state *s = (struct timer_state *)opaque; |
| |
| s->armed = 0; |
| goldfish_device_set_irq(&s->dev, 0, 1); |
| } |
| |
| struct rtc_state { |
| struct goldfish_device dev; |
| uint32_t alarm_low; |
| int32_t alarm_high; |
| int64_t now; |
| }; |
| |
| /* we save the RTC for the case where the kernel is in the middle of a rtc_read |
| * (i.e. it has read the low 32-bit of s->now, but not the high 32-bits yet */ |
| #define GOLDFISH_RTC_SAVE_VERSION 1 |
| |
| static void goldfish_rtc_save(QEMUFile* f, void* opaque) |
| { |
| struct rtc_state* s = opaque; |
| |
| qemu_put_be64(f, s->now); |
| } |
| |
| static int goldfish_rtc_load(QEMUFile* f, void* opaque, int version_id) |
| { |
| struct rtc_state* s = opaque; |
| |
| if (version_id != GOLDFISH_RTC_SAVE_VERSION) |
| return -1; |
| |
| /* this is an old value that is not correct. but that's ok anyway */ |
| s->now = qemu_get_be64(f); |
| return 0; |
| } |
| |
| static uint32_t goldfish_rtc_read(void *opaque, target_phys_addr_t offset) |
| { |
| struct rtc_state *s = (struct rtc_state *)opaque; |
| switch(offset) { |
| case 0x0: |
| s->now = (int64_t)time(NULL) * 1000000000; |
| return s->now; |
| case 0x4: |
| return s->now >> 32; |
| default: |
| cpu_abort (cpu_single_env, "goldfish_rtc_read: Bad offset %x\n", offset); |
| return 0; |
| } |
| } |
| |
| static void goldfish_rtc_write(void *opaque, target_phys_addr_t offset, uint32_t value) |
| { |
| struct rtc_state *s = (struct rtc_state *)opaque; |
| int64_t alarm; |
| switch(offset) { |
| case 0x8: |
| s->alarm_low = value; |
| alarm = s->alarm_low | (int64_t)s->alarm_high << 32; |
| //printf("next alarm at %lld, tps %lld\n", alarm, ticks_per_sec); |
| //qemu_mod_timer(s->timer, alarm); |
| break; |
| case 0xc: |
| s->alarm_high = value; |
| //printf("alarm_high %d\n", s->alarm_high); |
| break; |
| case 0x10: |
| goldfish_device_set_irq(&s->dev, 0, 0); |
| break; |
| default: |
| cpu_abort (cpu_single_env, "goldfish_rtc_write: Bad offset %x\n", offset); |
| } |
| } |
| |
| static struct timer_state timer_state = { |
| .dev = { |
| .name = "goldfish_timer", |
| .id = -1, |
| .size = 0x1000, |
| .irq_count = 1, |
| } |
| }; |
| |
| static struct timer_state rtc_state = { |
| .dev = { |
| .name = "goldfish_rtc", |
| .id = -1, |
| .size = 0x1000, |
| .irq_count = 1, |
| } |
| }; |
| |
| static CPUReadMemoryFunc *goldfish_timer_readfn[] = { |
| goldfish_timer_read, |
| goldfish_timer_read, |
| goldfish_timer_read |
| }; |
| |
| static CPUWriteMemoryFunc *goldfish_timer_writefn[] = { |
| goldfish_timer_write, |
| goldfish_timer_write, |
| goldfish_timer_write |
| }; |
| |
| static CPUReadMemoryFunc *goldfish_rtc_readfn[] = { |
| goldfish_rtc_read, |
| goldfish_rtc_read, |
| goldfish_rtc_read |
| }; |
| |
| static CPUWriteMemoryFunc *goldfish_rtc_writefn[] = { |
| goldfish_rtc_write, |
| goldfish_rtc_write, |
| goldfish_rtc_write |
| }; |
| |
| void goldfish_timer_and_rtc_init(uint32_t timerbase, int timerirq) |
| { |
| timer_state.dev.base = timerbase; |
| timer_state.dev.irq = timerirq; |
| timer_state.timer = qemu_new_timer(vm_clock, goldfish_timer_tick, &timer_state); |
| goldfish_device_add(&timer_state.dev, goldfish_timer_readfn, goldfish_timer_writefn, &timer_state); |
| register_savevm( "goldfish_timer", 0, GOLDFISH_TIMER_SAVE_VERSION, |
| goldfish_timer_save, goldfish_timer_load, &timer_state); |
| |
| goldfish_device_add(&rtc_state.dev, goldfish_rtc_readfn, goldfish_rtc_writefn, &rtc_state); |
| register_savevm( "goldfish_rtc", 0, GOLDFISH_RTC_SAVE_VERSION, |
| goldfish_rtc_save, goldfish_rtc_load, &rtc_state); |
| } |
| |