README - fp2-dev/platform/external/sepolicy - Gitiles

 Policy Generation:

 Additional, per device, policy files can be added into the
 policy build.

 They can be configured through the use of three variables,
 they are:
 1. BOARD_SEPOLICY_REPLACE
 2. BOARD_SEPOLICY_UNION
 3. BOARD_SEPOLICY_DIRS
 4. BOARD_SEPOLICY_IGNORE

 The variables should be set in the BoardConfig.mk file in
 the device or vendor directories.

 BOARD_SEPOLICY_UNION is a list of files that will be
 "unioned", IE concatenated, at the END of their respective
 file in external/sepolicy. Note, to add a unique file you
 would use this variable.

 BOARD_SEPOLICY_REPLACE is a list of files that will be
 used instead of the corresponding file in external/sepolicy.

 BOARD_SEPOLICY_DIRS contains a list of directories to search
 for BOARD_SEPOLICY_UNION and BOARD_SEPOLICY_REPLACE files. Order
 matters in this list.
 eg.) If you have BOARD_SEPOLICY_UNION += widget.te and have 2
 instances of widget.te files on BOARD_SEPOLICY_DIRS search path.
 The first one found (at the first search dir containing the file)
 gets processed first.
 Reviewing out/target/product/<device>/etc/sepolicy_intermediates/policy.conf
 will help sort out ordering issues.

 It is an error to specify a BOARD_POLICY_REPLACE file that does
 not exist in external/sepolicy.

 It is an error to specify a BOARD_POLICY_REPLACE file that appears
 multiple times on the policy search path defined by BOARD_SEPOLICY_DIRS.
 eg.) if you specify shell.te in BOARD_SEPOLICY_REPLACE and
 BOARD_SEPOLICY_DIRS is set to
 "vendor/widget/common/sepolicy device/widget/x/sepolicy" and shell.te
 appears in both locations, it is an error. Unless it is in
 BOARD_SEPOLICY_IGNORE to be filtered out. See BOARD_SEPOLICY_IGNORE
 for more details.

 It is an error to specify the same file name in both
 BOARD_POLICY_REPLACE and BOARD_POLICY_UNION.

 It is an error to specify a BOARD_SEPOLICY_DIRS that has no entries when
 specifying BOARD_SEPOLICY_REPLACE.

 It is an error to specify a BOARD_POLICY_UNION file that
 doesn't appear in any of the BOARD_SEPOLICY_DIRS locations.

 BOARD_SEPOLICY_IGNORE is a list of paths (directory + filename) of
 files that are not to be included in the resulting policy. This list
 is passed to filter-out to remove any paths you may want to ignore. This
 is useful if you have numerous config directories that contain a file
 and you want to NOT include a particular file in your resulting
 policy file, either by UNION or REPLACE.
 Eg.) Suppose the following:
      BOARD_SEPOLICY_DIRS += X Y
      BOARD_SEPOLICY_REPLACE += A
      BOARD_SEPOLICY_IGNORE += X/A

      Directories X and Y contain A.

      The resulting policy is created by using Y/A only, thus X/A was
      ignored.

 Example BoardConfig.mk Usage:
 From the Tuna device BoardConfig.mk, device/samsung/tuna/BoardConfig.mk

 BOARD_SEPOLICY_DIRS += \
         device/samsung/tuna/sepolicy

 BOARD_SEPOLICY_UNION += \
         genfs_contexts \
         file_contexts \
         sepolicy.te

 SPECIFIC POLICY FILE INFORMATION

 mac_permissions.xml:
   ABOUT:
     The mac_permissions.xml file is used for controlling the mmac solutions
     as well as mapping a public base16 signing key with an arbitrary seinfo
     string. Details of the files contents can be found in a comment at the
     top of that file. The seinfo string, previously mentioned, is the same string
     that is referenced in seapp_contexts.

     This file can be replaced through BOARD_SEPOLICY_REPLACE containing the
     value "mac_permissions.xml", or appended to by using the BOARD_SEPOLICY_UNION
     variable. It is important to note the final processed version of this file
     is stripped of comments and whitespace. This is to preserve space on the
     system.img. If one wishes to view it in a more human friendly format,
     the "tidy" or "xmllint" command will assist you.

   TOOLING:
     insertkeys.py
       Is a helper script for mapping arbitrary tags in the signature stanzas of
       mac_permissions.xml to public keys found in pem files. This script takes
       a mac_permissions.xml file(s) and configuration file in order to operate.
       Details of the configuration file (keys.conf) can be found in the subsection
       keys.conf. This tool is also responsible for stripping the comments and
       whitespace during processing.

       keys.conf
         The keys.conf file is used for controlling the mapping of "tags" found in
         the mac_permissions.xml signature stanzas with actual public keys found in
         pem files. The configuration file can be used in BOARD_SEPOLICY_UNION and
         BOARD_SEPOLICY_REPLACE variables and is processed via m4.

         The script allows for mapping any string contained in TARGET_BUILD_VARIANT
         with specific path to a pem file. Typically TARGET_BUILD_VARIANT is either
         user, eng or userdebug. Additionally, one can specify "ALL" to map a path to
         any string specified in TARGET_BUILD_VARIANT. All tags are matched verbatim
         and all options are matched lowercase. The options are "tolowered" automatically
         for the user, it is convention to specify tags and options in all uppercase
         and tags start with @. The option arguments can also use environment variables
         via the familiar $VARIABLE syntax. This is often useful for setting a location
         to ones release keys.

         Often times, one will need to integrate an application that was signed by a separate
         organization and may need to extract the pem file for the insertkeys/keys.conf tools.
         Extraction of the public key in the pem format is possible via openssl. First you need
         to unzip the apk, once it is unzipped, cd into the META_INF directory and then execute
         openssl pkcs7 -inform DER -in CERT.RSA -out CERT.pem -outform PEM  -print_certs
         On some occasions CERT.RSA has a different name, and you will need to adjust for that.
         After extracting the pem, you can rename it, and configure keys.conf and
         mac_permissions.xml to pick up the change. You MUST open the generated pem file in a text
         editor and strip out anything outside the opening and closing scissor lines. Failure to do
         so WILL cause a compile time issue thrown by insertkeys.py

         NOTE: The pem files are base64 encoded and PackageManagerService, mac_permissions.xml
               and setool all use base16 encodings.
	Policy Generation:

	Additional, per device, policy files can be added into the
	policy build.

	They can be configured through the use of three variables,
	they are:
	1. BOARD_SEPOLICY_REPLACE
	2. BOARD_SEPOLICY_UNION
	3. BOARD_SEPOLICY_DIRS
	4. BOARD_SEPOLICY_IGNORE

	The variables should be set in the BoardConfig.mk file in
	the device or vendor directories.

	BOARD_SEPOLICY_UNION is a list of files that will be
	"unioned", IE concatenated, at the END of their respective
	file in external/sepolicy. Note, to add a unique file you
	would use this variable.

	BOARD_SEPOLICY_REPLACE is a list of files that will be
	used instead of the corresponding file in external/sepolicy.

	BOARD_SEPOLICY_DIRS contains a list of directories to search
	for BOARD_SEPOLICY_UNION and BOARD_SEPOLICY_REPLACE files. Order
	matters in this list.
	eg.) If you have BOARD_SEPOLICY_UNION += widget.te and have 2
	instances of widget.te files on BOARD_SEPOLICY_DIRS search path.
	The first one found (at the first search dir containing the file)
	gets processed first.
	Reviewing out/target/product/<device>/etc/sepolicy_intermediates/policy.conf
	will help sort out ordering issues.

	It is an error to specify a BOARD_POLICY_REPLACE file that does
	not exist in external/sepolicy.

	It is an error to specify a BOARD_POLICY_REPLACE file that appears
	multiple times on the policy search path defined by BOARD_SEPOLICY_DIRS.
	eg.) if you specify shell.te in BOARD_SEPOLICY_REPLACE and
	BOARD_SEPOLICY_DIRS is set to
	"vendor/widget/common/sepolicy device/widget/x/sepolicy" and shell.te
	appears in both locations, it is an error. Unless it is in
	BOARD_SEPOLICY_IGNORE to be filtered out. See BOARD_SEPOLICY_IGNORE
	for more details.

	It is an error to specify the same file name in both
	BOARD_POLICY_REPLACE and BOARD_POLICY_UNION.

	It is an error to specify a BOARD_SEPOLICY_DIRS that has no entries when
	specifying BOARD_SEPOLICY_REPLACE.

	It is an error to specify a BOARD_POLICY_UNION file that
	doesn't appear in any of the BOARD_SEPOLICY_DIRS locations.

	BOARD_SEPOLICY_IGNORE is a list of paths (directory + filename) of
	files that are not to be included in the resulting policy. This list
	is passed to filter-out to remove any paths you may want to ignore. This
	is useful if you have numerous config directories that contain a file
	and you want to NOT include a particular file in your resulting
	policy file, either by UNION or REPLACE.
	Eg.) Suppose the following:
	BOARD_SEPOLICY_DIRS += X Y
	BOARD_SEPOLICY_REPLACE += A
	BOARD_SEPOLICY_IGNORE += X/A

	Directories X and Y contain A.

	The resulting policy is created by using Y/A only, thus X/A was
	ignored.

	Example BoardConfig.mk Usage:
	From the Tuna device BoardConfig.mk, device/samsung/tuna/BoardConfig.mk

	BOARD_SEPOLICY_DIRS += \
	device/samsung/tuna/sepolicy

	BOARD_SEPOLICY_UNION += \
	genfs_contexts \
	file_contexts \
	sepolicy.te

	SPECIFIC POLICY FILE INFORMATION

	mac_permissions.xml:
	ABOUT:
	The mac_permissions.xml file is used for controlling the mmac solutions
	as well as mapping a public base16 signing key with an arbitrary seinfo
	string. Details of the files contents can be found in a comment at the
	top of that file. The seinfo string, previously mentioned, is the same string
	that is referenced in seapp_contexts.

	This file can be replaced through BOARD_SEPOLICY_REPLACE containing the
	value "mac_permissions.xml", or appended to by using the BOARD_SEPOLICY_UNION
	variable. It is important to note the final processed version of this file
	is stripped of comments and whitespace. This is to preserve space on the
	system.img. If one wishes to view it in a more human friendly format,
	the "tidy" or "xmllint" command will assist you.

	TOOLING:
	insertkeys.py
	Is a helper script for mapping arbitrary tags in the signature stanzas of
	mac_permissions.xml to public keys found in pem files. This script takes
	a mac_permissions.xml file(s) and configuration file in order to operate.
	Details of the configuration file (keys.conf) can be found in the subsection
	keys.conf. This tool is also responsible for stripping the comments and
	whitespace during processing.

	keys.conf
	The keys.conf file is used for controlling the mapping of "tags" found in
	the mac_permissions.xml signature stanzas with actual public keys found in
	pem files. The configuration file can be used in BOARD_SEPOLICY_UNION and
	BOARD_SEPOLICY_REPLACE variables and is processed via m4.

	The script allows for mapping any string contained in TARGET_BUILD_VARIANT
	with specific path to a pem file. Typically TARGET_BUILD_VARIANT is either
	user, eng or userdebug. Additionally, one can specify "ALL" to map a path to
	any string specified in TARGET_BUILD_VARIANT. All tags are matched verbatim
	and all options are matched lowercase. The options are "tolowered" automatically
	for the user, it is convention to specify tags and options in all uppercase
	and tags start with @. The option arguments can also use environment variables
	via the familiar $VARIABLE syntax. This is often useful for setting a location
	to ones release keys.

	Often times, one will need to integrate an application that was signed by a separate
	organization and may need to extract the pem file for the insertkeys/keys.conf tools.
	Extraction of the public key in the pem format is possible via openssl. First you need
	to unzip the apk, once it is unzipped, cd into the META_INF directory and then execute
	openssl pkcs7 -inform DER -in CERT.RSA -out CERT.pem -outform PEM -print_certs
	On some occasions CERT.RSA has a different name, and you will need to adjust for that.
	After extracting the pem, you can rename it, and configure keys.conf and
	mac_permissions.xml to pick up the change. You MUST open the generated pem file in a text
	editor and strip out anything outside the opening and closing scissor lines. Failure to do
	so WILL cause a compile time issue thrown by insertkeys.py

	NOTE: The pem files are base64 encoded and PackageManagerService, mac_permissions.xml
	and setool all use base16 encodings.