| /* |
| * Copyright (c) 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl> |
| * Copyright (c) 1993 Branko Lankester <branko@hacktic.nl> |
| * Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com> |
| * Copyright (c) 1996-1999 Wichert Akkerman <wichert@cistron.nl> |
| * Copyright (c) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Linux for s390 port by D.J. Barrow |
| * <barrow_dj@mail.yahoo.com,djbarrow@de.ibm.com> |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "defs.h" |
| #include <sys/user.h> |
| #include <sys/param.h> |
| #include <fcntl.h> |
| #if HAVE_SYS_UIO_H |
| # include <sys/uio.h> |
| #endif |
| |
| #if defined(IA64) |
| # include <asm/ptrace_offsets.h> |
| # include <asm/rse.h> |
| #endif |
| |
| #ifdef HAVE_SYS_REG_H |
| # include <sys/reg.h> |
| #elif defined(HAVE_LINUX_PTRACE_H) |
| # undef PTRACE_SYSCALL |
| # ifdef HAVE_STRUCT_IA64_FPREG |
| # define ia64_fpreg XXX_ia64_fpreg |
| # endif |
| # ifdef HAVE_STRUCT_PT_ALL_USER_REGS |
| # define pt_all_user_regs XXX_pt_all_user_regs |
| # endif |
| # ifdef HAVE_STRUCT_PTRACE_PEEKSIGINFO_ARGS |
| # define ptrace_peeksiginfo_args XXX_ptrace_peeksiginfo_args |
| # endif |
| # include <linux/ptrace.h> |
| # undef ptrace_peeksiginfo_args |
| # undef ia64_fpreg |
| # undef pt_all_user_regs |
| #endif |
| |
| int |
| string_to_uint(const char *str) |
| { |
| char *error; |
| long value; |
| |
| if (!*str) |
| return -1; |
| errno = 0; |
| value = strtol(str, &error, 10); |
| if (errno || *error || value < 0 || (long)(int)value != value) |
| return -1; |
| return (int)value; |
| } |
| |
| int |
| tv_nz(struct timeval *a) |
| { |
| return a->tv_sec || a->tv_usec; |
| } |
| |
| int |
| tv_cmp(struct timeval *a, struct timeval *b) |
| { |
| if (a->tv_sec < b->tv_sec |
| || (a->tv_sec == b->tv_sec && a->tv_usec < b->tv_usec)) |
| return -1; |
| if (a->tv_sec > b->tv_sec |
| || (a->tv_sec == b->tv_sec && a->tv_usec > b->tv_usec)) |
| return 1; |
| return 0; |
| } |
| |
| double |
| tv_float(struct timeval *tv) |
| { |
| return tv->tv_sec + tv->tv_usec/1000000.0; |
| } |
| |
| void |
| tv_add(struct timeval *tv, struct timeval *a, struct timeval *b) |
| { |
| tv->tv_sec = a->tv_sec + b->tv_sec; |
| tv->tv_usec = a->tv_usec + b->tv_usec; |
| if (tv->tv_usec >= 1000000) { |
| tv->tv_sec++; |
| tv->tv_usec -= 1000000; |
| } |
| } |
| |
| void |
| tv_sub(struct timeval *tv, struct timeval *a, struct timeval *b) |
| { |
| tv->tv_sec = a->tv_sec - b->tv_sec; |
| tv->tv_usec = a->tv_usec - b->tv_usec; |
| if (((long) tv->tv_usec) < 0) { |
| tv->tv_sec--; |
| tv->tv_usec += 1000000; |
| } |
| } |
| |
| void |
| tv_div(struct timeval *tv, struct timeval *a, int n) |
| { |
| tv->tv_usec = (a->tv_sec % n * 1000000 + a->tv_usec + n / 2) / n; |
| tv->tv_sec = a->tv_sec / n + tv->tv_usec / 1000000; |
| tv->tv_usec %= 1000000; |
| } |
| |
| void |
| tv_mul(struct timeval *tv, struct timeval *a, int n) |
| { |
| tv->tv_usec = a->tv_usec * n; |
| tv->tv_sec = a->tv_sec * n + tv->tv_usec / 1000000; |
| tv->tv_usec %= 1000000; |
| } |
| |
| const char * |
| xlookup(const struct xlat *xlat, int val) |
| { |
| for (; xlat->str != NULL; xlat++) |
| if (xlat->val == val) |
| return xlat->str; |
| return NULL; |
| } |
| |
| #if !defined HAVE_STPCPY |
| char * |
| stpcpy(char *dst, const char *src) |
| { |
| while ((*dst = *src++) != '\0') |
| dst++; |
| return dst; |
| } |
| #endif |
| |
| /* Find a next bit which is set. |
| * Starts testing at cur_bit. |
| * Returns -1 if no more bits are set. |
| * |
| * We never touch bytes we don't need to. |
| * On big-endian, array is assumed to consist of |
| * current_wordsize wide words: for example, is current_wordsize is 4, |
| * the bytes are walked in 3,2,1,0, 7,6,5,4, 11,10,9,8 ... sequence. |
| * On little-endian machines, word size is immaterial. |
| */ |
| int |
| next_set_bit(const void *bit_array, unsigned cur_bit, unsigned size_bits) |
| { |
| const unsigned endian = 1; |
| int little_endian = *(char*)&endian; |
| |
| const uint8_t *array = bit_array; |
| unsigned pos = cur_bit / 8; |
| unsigned pos_xor_mask = little_endian ? 0 : current_wordsize-1; |
| |
| for (;;) { |
| uint8_t bitmask; |
| uint8_t cur_byte; |
| |
| if (cur_bit >= size_bits) |
| return -1; |
| cur_byte = array[pos ^ pos_xor_mask]; |
| if (cur_byte == 0) { |
| cur_bit = (cur_bit + 8) & (-8); |
| pos++; |
| continue; |
| } |
| bitmask = 1 << (cur_bit & 7); |
| for (;;) { |
| if (cur_byte & bitmask) |
| return cur_bit; |
| cur_bit++; |
| if (cur_bit >= size_bits) |
| return -1; |
| bitmask <<= 1; |
| /* This check *can't be* optimized out: */ |
| if (bitmask == 0) |
| break; |
| } |
| pos++; |
| } |
| } |
| /* |
| * Print entry in struct xlat table, if there. |
| */ |
| void |
| printxval(const struct xlat *xlat, int val, const char *dflt) |
| { |
| const char *str = xlookup(xlat, val); |
| |
| if (str) |
| tprints(str); |
| else |
| tprintf("%#x /* %s */", val, dflt); |
| } |
| |
| /* |
| * Print 64bit argument at position arg_no and return the index of the next |
| * argument. |
| */ |
| int |
| printllval(struct tcb *tcp, const char *format, int arg_no, bool align) |
| { |
| #if SIZEOF_LONG > 4 && SIZEOF_LONG == SIZEOF_LONG_LONG |
| # if SUPPORTED_PERSONALITIES > 1 |
| if (current_wordsize > 4) { |
| # endif |
| tprintf(format, tcp->u_arg[arg_no]); |
| arg_no++; |
| # if SUPPORTED_PERSONALITIES > 1 |
| } else { |
| # if defined(AARCH64) || defined(POWERPC64) |
| if (align) { |
| /* Align arg_no to the next even number. */ |
| arg_no = (arg_no + 1) & 0xe; |
| } |
| # endif |
| tprintf(format, LONG_LONG(tcp->u_arg[arg_no], tcp->u_arg[arg_no + 1])); |
| arg_no += 2; |
| } |
| # endif /* SUPPORTED_PERSONALITIES */ |
| #elif SIZEOF_LONG > 4 |
| # error Unsupported configuration: SIZEOF_LONG > 4 && SIZEOF_LONG_LONG > SIZEOF_LONG |
| #elif defined LINUX_MIPSN32 |
| tprintf(format, tcp->ext_arg[arg_no]); |
| arg_no++; |
| #elif defined X32 |
| if (current_personality == 0) { |
| tprintf(format, tcp->ext_arg[arg_no]); |
| arg_no++; |
| } else { |
| tprintf(format, LONG_LONG(tcp->u_arg[arg_no], tcp->u_arg[arg_no + 1])); |
| arg_no += 2; |
| } |
| #else |
| # if defined __ARM_EABI__ || \ |
| defined LINUX_MIPSO32 || \ |
| defined POWERPC || \ |
| defined XTENSA |
| if (align) { |
| /* Align arg_no to the next even number. */ |
| arg_no = (arg_no + 1) & 0xe; |
| } |
| # endif |
| tprintf(format, LONG_LONG(tcp->u_arg[arg_no], tcp->u_arg[arg_no + 1])); |
| arg_no += 2; |
| #endif |
| |
| return arg_no; |
| } |
| |
| /* |
| * Interpret `xlat' as an array of flags |
| * print the entries whose bits are on in `flags' |
| * return # of flags printed. |
| */ |
| void |
| addflags(const struct xlat *xlat, int flags) |
| { |
| for (; xlat->str; xlat++) { |
| if (xlat->val && (flags & xlat->val) == xlat->val) { |
| tprintf("|%s", xlat->str); |
| flags &= ~xlat->val; |
| } |
| } |
| if (flags) { |
| tprintf("|%#x", flags); |
| } |
| } |
| |
| /* |
| * Interpret `xlat' as an array of flags. |
| * Print to static string the entries whose bits are on in `flags' |
| * Return static string. |
| */ |
| const char * |
| sprintflags(const char *prefix, const struct xlat *xlat, int flags) |
| { |
| static char outstr[1024]; |
| char *outptr; |
| int found = 0; |
| |
| outptr = stpcpy(outstr, prefix); |
| |
| for (; xlat->str; xlat++) { |
| if ((flags & xlat->val) == xlat->val) { |
| if (found) |
| *outptr++ = '|'; |
| outptr = stpcpy(outptr, xlat->str); |
| found = 1; |
| flags &= ~xlat->val; |
| if (!flags) |
| break; |
| } |
| } |
| if (flags) { |
| if (found) |
| *outptr++ = '|'; |
| outptr += sprintf(outptr, "%#x", flags); |
| } |
| |
| return outstr; |
| } |
| |
| int |
| printflags(const struct xlat *xlat, int flags, const char *dflt) |
| { |
| int n; |
| const char *sep; |
| |
| if (flags == 0 && xlat->val == 0) { |
| tprints(xlat->str); |
| return 1; |
| } |
| |
| sep = ""; |
| for (n = 0; xlat->str; xlat++) { |
| if (xlat->val && (flags & xlat->val) == xlat->val) { |
| tprintf("%s%s", sep, xlat->str); |
| flags &= ~xlat->val; |
| sep = "|"; |
| n++; |
| } |
| } |
| |
| if (n) { |
| if (flags) { |
| tprintf("%s%#x", sep, flags); |
| n++; |
| } |
| } else { |
| if (flags) { |
| tprintf("%#x", flags); |
| if (dflt) |
| tprintf(" /* %s */", dflt); |
| } else { |
| if (dflt) |
| tprints("0"); |
| } |
| } |
| |
| return n; |
| } |
| |
| void |
| printnum(struct tcb *tcp, long addr, const char *fmt) |
| { |
| long num; |
| |
| if (!addr) { |
| tprints("NULL"); |
| return; |
| } |
| if (umove(tcp, addr, &num) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| tprints("["); |
| tprintf(fmt, num); |
| tprints("]"); |
| } |
| |
| void |
| printnum_int(struct tcb *tcp, long addr, const char *fmt) |
| { |
| int num; |
| |
| if (!addr) { |
| tprints("NULL"); |
| return; |
| } |
| if (umove(tcp, addr, &num) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| tprints("["); |
| tprintf(fmt, num); |
| tprints("]"); |
| } |
| |
| void |
| printfd(struct tcb *tcp, int fd) |
| { |
| char path[PATH_MAX + 1]; |
| |
| if (show_fd_path && getfdpath(tcp, fd, path, sizeof(path)) >= 0) |
| tprintf("%d<%s>", fd, path); |
| else |
| tprintf("%d", fd); |
| } |
| |
| void |
| printuid(const char *text, unsigned long uid) |
| { |
| tprintf((uid == -1) ? "%s%ld" : "%s%lu", text, uid); |
| } |
| |
| /* |
| * Quote string `instr' of length `size' |
| * Write up to (3 + `size' * 4) bytes to `outstr' buffer. |
| * If `len' is -1, treat `instr' as a NUL-terminated string |
| * and quote at most (`size' - 1) bytes. |
| * |
| * Returns 0 if len == -1 and NUL was seen, 1 otherwise. |
| * Note that if len >= 0, always returns 1. |
| */ |
| int |
| string_quote(const char *instr, char *outstr, long len, int size) |
| { |
| const unsigned char *ustr = (const unsigned char *) instr; |
| char *s = outstr; |
| int usehex, c, i, eol; |
| |
| eol = 0x100; /* this can never match a char */ |
| if (len == -1) { |
| size--; |
| eol = '\0'; |
| } |
| |
| usehex = 0; |
| if (xflag > 1) |
| usehex = 1; |
| else if (xflag) { |
| /* Check for presence of symbol which require |
| to hex-quote the whole string. */ |
| for (i = 0; i < size; ++i) { |
| c = ustr[i]; |
| /* Check for NUL-terminated string. */ |
| if (c == eol) |
| break; |
| |
| /* Force hex unless c is printable or whitespace */ |
| if (c > 0x7e) { |
| usehex = 1; |
| break; |
| } |
| /* In ASCII isspace is only these chars: "\t\n\v\f\r". |
| * They happen to have ASCII codes 9,10,11,12,13. |
| */ |
| if (c < ' ' && (unsigned)(c - 9) >= 5) { |
| usehex = 1; |
| break; |
| } |
| } |
| } |
| |
| *s++ = '\"'; |
| |
| if (usehex) { |
| /* Hex-quote the whole string. */ |
| for (i = 0; i < size; ++i) { |
| c = ustr[i]; |
| /* Check for NUL-terminated string. */ |
| if (c == eol) |
| goto asciz_ended; |
| *s++ = '\\'; |
| *s++ = 'x'; |
| *s++ = "0123456789abcdef"[c >> 4]; |
| *s++ = "0123456789abcdef"[c & 0xf]; |
| } |
| } else { |
| for (i = 0; i < size; ++i) { |
| c = ustr[i]; |
| /* Check for NUL-terminated string. */ |
| if (c == eol) |
| goto asciz_ended; |
| switch (c) { |
| case '\"': case '\\': |
| *s++ = '\\'; |
| *s++ = c; |
| break; |
| case '\f': |
| *s++ = '\\'; |
| *s++ = 'f'; |
| break; |
| case '\n': |
| *s++ = '\\'; |
| *s++ = 'n'; |
| break; |
| case '\r': |
| *s++ = '\\'; |
| *s++ = 'r'; |
| break; |
| case '\t': |
| *s++ = '\\'; |
| *s++ = 't'; |
| break; |
| case '\v': |
| *s++ = '\\'; |
| *s++ = 'v'; |
| break; |
| default: |
| if (c >= ' ' && c <= 0x7e) |
| *s++ = c; |
| else { |
| /* Print \octal */ |
| *s++ = '\\'; |
| if (i + 1 < size |
| && ustr[i + 1] >= '0' |
| && ustr[i + 1] <= '9' |
| ) { |
| /* Print \ooo */ |
| *s++ = '0' + (c >> 6); |
| *s++ = '0' + ((c >> 3) & 0x7); |
| } else { |
| /* Print \[[o]o]o */ |
| if ((c >> 3) != 0) { |
| if ((c >> 6) != 0) |
| *s++ = '0' + (c >> 6); |
| *s++ = '0' + ((c >> 3) & 0x7); |
| } |
| } |
| *s++ = '0' + (c & 0x7); |
| } |
| break; |
| } |
| } |
| } |
| |
| *s++ = '\"'; |
| *s = '\0'; |
| |
| /* Return zero if we printed entire ASCIZ string (didn't truncate it) */ |
| if (len == -1 && ustr[i] == '\0') { |
| /* We didn't see NUL yet (otherwise we'd jump to 'asciz_ended') |
| * but next char is NUL. |
| */ |
| return 0; |
| } |
| |
| return 1; |
| |
| asciz_ended: |
| *s++ = '\"'; |
| *s = '\0'; |
| /* Return zero: we printed entire ASCIZ string (didn't truncate it) */ |
| return 0; |
| } |
| |
| /* |
| * Print path string specified by address `addr' and length `n'. |
| * If path length exceeds `n', append `...' to the output. |
| */ |
| void |
| printpathn(struct tcb *tcp, long addr, int n) |
| { |
| char path[MAXPATHLEN + 1]; |
| int nul_seen; |
| |
| if (!addr) { |
| tprints("NULL"); |
| return; |
| } |
| |
| /* Cap path length to the path buffer size */ |
| if (n > sizeof path - 1) |
| n = sizeof path - 1; |
| |
| /* Fetch one byte more to find out whether path length > n. */ |
| nul_seen = umovestr(tcp, addr, n + 1, path); |
| if (nul_seen < 0) |
| tprintf("%#lx", addr); |
| else { |
| char *outstr; |
| |
| path[n] = '\0'; |
| n++; |
| outstr = alloca(4 * n); /* 4*(n-1) + 3 for quotes and NUL */ |
| string_quote(path, outstr, -1, n); |
| tprints(outstr); |
| if (!nul_seen) |
| tprints("..."); |
| } |
| } |
| |
| void |
| printpath(struct tcb *tcp, long addr) |
| { |
| /* Size must correspond to char path[] size in printpathn */ |
| printpathn(tcp, addr, MAXPATHLEN); |
| } |
| |
| /* |
| * Print string specified by address `addr' and length `len'. |
| * If `len' < 0, treat the string as a NUL-terminated string. |
| * If string length exceeds `max_strlen', append `...' to the output. |
| */ |
| void |
| printstr(struct tcb *tcp, long addr, long len) |
| { |
| static char *str = NULL; |
| static char *outstr; |
| int size; |
| int ellipsis; |
| |
| if (!addr) { |
| tprints("NULL"); |
| return; |
| } |
| /* Allocate static buffers if they are not allocated yet. */ |
| if (!str) { |
| unsigned int outstr_size = 4 * max_strlen + /*for quotes and NUL:*/ 3; |
| |
| if (outstr_size / 4 != max_strlen) |
| die_out_of_memory(); |
| str = malloc(max_strlen + 1); |
| if (!str) |
| die_out_of_memory(); |
| outstr = malloc(outstr_size); |
| if (!outstr) |
| die_out_of_memory(); |
| } |
| |
| if (len == -1) { |
| /* |
| * Treat as a NUL-terminated string: fetch one byte more |
| * because string_quote() quotes one byte less. |
| */ |
| size = max_strlen + 1; |
| if (umovestr(tcp, addr, size, str) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| } |
| else { |
| size = max_strlen; |
| if (size > (unsigned long)len) |
| size = (unsigned long)len; |
| if (umoven(tcp, addr, size, str) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| } |
| |
| /* If string_quote didn't see NUL and (it was supposed to be ASCIZ str |
| * or we were requested to print more than -s NUM chars)... |
| */ |
| ellipsis = (string_quote(str, outstr, len, size) && |
| (len < 0 || len > max_strlen)); |
| |
| tprints(outstr); |
| if (ellipsis) |
| tprints("..."); |
| } |
| |
| #if HAVE_SYS_UIO_H |
| void |
| dumpiov(struct tcb *tcp, int len, long addr) |
| { |
| #if SUPPORTED_PERSONALITIES > 1 |
| union { |
| struct { u_int32_t base; u_int32_t len; } *iov32; |
| struct { u_int64_t base; u_int64_t len; } *iov64; |
| } iovu; |
| #define iov iovu.iov64 |
| #define sizeof_iov \ |
| (current_wordsize == 4 ? sizeof(*iovu.iov32) : sizeof(*iovu.iov64)) |
| #define iov_iov_base(i) \ |
| (current_wordsize == 4 ? (uint64_t) iovu.iov32[i].base : iovu.iov64[i].base) |
| #define iov_iov_len(i) \ |
| (current_wordsize == 4 ? (uint64_t) iovu.iov32[i].len : iovu.iov64[i].len) |
| #else |
| struct iovec *iov; |
| #define sizeof_iov sizeof(*iov) |
| #define iov_iov_base(i) iov[i].iov_base |
| #define iov_iov_len(i) iov[i].iov_len |
| #endif |
| int i; |
| unsigned size; |
| |
| size = sizeof_iov * len; |
| /* Assuming no sane program has millions of iovs */ |
| if ((unsigned)len > 1024*1024 /* insane or negative size? */ |
| || (iov = malloc(size)) == NULL) { |
| fprintf(stderr, "Out of memory\n"); |
| return; |
| } |
| if (umoven(tcp, addr, size, (char *) iov) >= 0) { |
| for (i = 0; i < len; i++) { |
| /* include the buffer number to make it easy to |
| * match up the trace with the source */ |
| tprintf(" * %lu bytes in buffer %d\n", |
| (unsigned long)iov_iov_len(i), i); |
| dumpstr(tcp, (long) iov_iov_base(i), |
| iov_iov_len(i)); |
| } |
| } |
| free(iov); |
| #undef sizeof_iov |
| #undef iov_iov_base |
| #undef iov_iov_len |
| #undef iov |
| } |
| #endif |
| |
| void |
| dumpstr(struct tcb *tcp, long addr, int len) |
| { |
| static int strsize = -1; |
| static unsigned char *str; |
| |
| char outbuf[ |
| ( |
| (sizeof( |
| "xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx " |
| "1234567890123456") + /*in case I'm off by few:*/ 4) |
| /*align to 8 to make memset easier:*/ + 7) & -8 |
| ]; |
| const unsigned char *src; |
| int i; |
| |
| memset(outbuf, ' ', sizeof(outbuf)); |
| |
| if (strsize < len + 16) { |
| free(str); |
| str = malloc(len + 16); |
| if (!str) { |
| strsize = -1; |
| fprintf(stderr, "Out of memory\n"); |
| return; |
| } |
| strsize = len + 16; |
| } |
| |
| if (umoven(tcp, addr, len, (char *) str) < 0) |
| return; |
| |
| /* Space-pad to 16 bytes */ |
| i = len; |
| while (i & 0xf) |
| str[i++] = ' '; |
| |
| i = 0; |
| src = str; |
| while (i < len) { |
| char *dst = outbuf; |
| /* Hex dump */ |
| do { |
| if (i < len) { |
| *dst++ = "0123456789abcdef"[*src >> 4]; |
| *dst++ = "0123456789abcdef"[*src & 0xf]; |
| } |
| else { |
| *dst++ = ' '; |
| *dst++ = ' '; |
| } |
| dst++; /* space is there by memset */ |
| i++; |
| if ((i & 7) == 0) |
| dst++; /* space is there by memset */ |
| src++; |
| } while (i & 0xf); |
| /* ASCII dump */ |
| i -= 16; |
| src -= 16; |
| do { |
| if (*src >= ' ' && *src < 0x7f) |
| *dst++ = *src; |
| else |
| *dst++ = '.'; |
| src++; |
| } while (++i & 0xf); |
| *dst = '\0'; |
| tprintf(" | %05x %s |\n", i - 16, outbuf); |
| } |
| } |
| |
| #ifdef HAVE_PROCESS_VM_READV |
| /* C library supports this, but the kernel might not. */ |
| static bool process_vm_readv_not_supported = 0; |
| #else |
| |
| /* Need to do this since process_vm_readv() is not yet available in libc. |
| * When libc is be updated, only "static bool process_vm_readv_not_supported" |
| * line should remain. |
| */ |
| #if !defined(__NR_process_vm_readv) |
| # if defined(I386) |
| # define __NR_process_vm_readv 347 |
| # elif defined(X86_64) |
| # define __NR_process_vm_readv 310 |
| # elif defined(POWERPC) |
| # define __NR_process_vm_readv 351 |
| # endif |
| #endif |
| |
| #if defined(__NR_process_vm_readv) |
| static bool process_vm_readv_not_supported = 0; |
| /* Have to avoid duplicating with the C library headers. */ |
| static ssize_t strace_process_vm_readv(pid_t pid, |
| const struct iovec *lvec, |
| unsigned long liovcnt, |
| const struct iovec *rvec, |
| unsigned long riovcnt, |
| unsigned long flags) |
| { |
| return syscall(__NR_process_vm_readv, (long)pid, lvec, liovcnt, rvec, riovcnt, flags); |
| } |
| #define process_vm_readv strace_process_vm_readv |
| #else |
| static bool process_vm_readv_not_supported = 1; |
| # define process_vm_readv(...) (errno = ENOSYS, -1) |
| #endif |
| |
| #endif /* end of hack */ |
| |
| #define PAGMASK (~(PAGSIZ - 1)) |
| /* |
| * move `len' bytes of data from process `pid' |
| * at address `addr' to our space at `laddr' |
| */ |
| int |
| umoven(struct tcb *tcp, long addr, int len, char *laddr) |
| { |
| int pid = tcp->pid; |
| int n, m, nread; |
| union { |
| long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| #if SUPPORTED_PERSONALITIES > 1 && SIZEOF_LONG > 4 |
| if (current_wordsize < sizeof(addr)) |
| addr &= (1ul << 8 * current_wordsize) - 1; |
| #endif |
| |
| if (!process_vm_readv_not_supported) { |
| struct iovec local[1], remote[1]; |
| int r; |
| |
| local[0].iov_base = laddr; |
| remote[0].iov_base = (void*)addr; |
| local[0].iov_len = remote[0].iov_len = len; |
| r = process_vm_readv(pid, local, 1, remote, 1, 0); |
| if (r == len) |
| return 0; |
| if (r >= 0) { |
| error_msg("umoven: short read (%d < %d) @0x%lx", |
| r, len, addr); |
| return -1; |
| } |
| switch (errno) { |
| case ENOSYS: |
| process_vm_readv_not_supported = 1; |
| break; |
| case ESRCH: |
| /* the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("process_vm_readv"); |
| return -1; |
| } |
| } |
| |
| nread = 0; |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); /* residue */ |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| switch (errno) { |
| case 0: |
| break; |
| case ESRCH: case EINVAL: |
| /* these could be seen if the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("umoven: PTRACE_PEEKDATA pid:%d @0x%lx", |
| pid, addr); |
| return -1; |
| } |
| m = MIN(sizeof(long) - n, len); |
| memcpy(laddr, &u.x[n], m); |
| addr += sizeof(long); |
| laddr += m; |
| nread += m; |
| len -= m; |
| } |
| while (len) { |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| switch (errno) { |
| case 0: |
| break; |
| case ESRCH: case EINVAL: |
| /* these could be seen if the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| if (nread) { |
| perror_msg("umoven: short read (%d < %d) @0x%lx", |
| nread, nread + len, addr - nread); |
| } |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("umoven: PTRACE_PEEKDATA pid:%d @0x%lx", |
| pid, addr); |
| return -1; |
| } |
| m = MIN(sizeof(long), len); |
| memcpy(laddr, u.x, m); |
| addr += sizeof(long); |
| laddr += m; |
| nread += m; |
| len -= m; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Like `umove' but make the additional effort of looking |
| * for a terminating zero byte. |
| * |
| * Returns < 0 on error, > 0 if NUL was seen, |
| * (TODO if useful: return count of bytes including NUL), |
| * else 0 if len bytes were read but no NUL byte seen. |
| * |
| * Note: there is no guarantee we won't overwrite some bytes |
| * in laddr[] _after_ terminating NUL (but, of course, |
| * we never write past laddr[len-1]). |
| */ |
| int |
| umovestr(struct tcb *tcp, long addr, int len, char *laddr) |
| { |
| #if SIZEOF_LONG == 4 |
| const unsigned long x01010101 = 0x01010101ul; |
| const unsigned long x80808080 = 0x80808080ul; |
| #elif SIZEOF_LONG == 8 |
| const unsigned long x01010101 = 0x0101010101010101ul; |
| const unsigned long x80808080 = 0x8080808080808080ul; |
| #else |
| # error SIZEOF_LONG > 8 |
| #endif |
| |
| int pid = tcp->pid; |
| int n, m, nread; |
| union { |
| unsigned long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| #if SUPPORTED_PERSONALITIES > 1 && SIZEOF_LONG > 4 |
| if (current_wordsize < sizeof(addr)) |
| addr &= (1ul << 8 * current_wordsize) - 1; |
| #endif |
| |
| nread = 0; |
| if (!process_vm_readv_not_supported) { |
| struct iovec local[1], remote[1]; |
| |
| local[0].iov_base = laddr; |
| remote[0].iov_base = (void*)addr; |
| |
| while (len > 0) { |
| int end_in_page; |
| int r; |
| int chunk_len; |
| |
| /* Don't read kilobytes: most strings are short */ |
| chunk_len = len; |
| if (chunk_len > 256) |
| chunk_len = 256; |
| /* Don't cross pages. I guess otherwise we can get EFAULT |
| * and fail to notice that terminating NUL lies |
| * in the existing (first) page. |
| * (I hope there aren't arches with pages < 4K) |
| */ |
| end_in_page = ((addr + chunk_len) & 4095); |
| r = chunk_len - end_in_page; |
| if (r > 0) /* if chunk_len > end_in_page */ |
| chunk_len = r; /* chunk_len -= end_in_page */ |
| |
| local[0].iov_len = remote[0].iov_len = chunk_len; |
| r = process_vm_readv(pid, local, 1, remote, 1, 0); |
| if (r > 0) { |
| if (memchr(local[0].iov_base, '\0', r)) |
| return 1; |
| local[0].iov_base += r; |
| remote[0].iov_base += r; |
| len -= r; |
| nread += r; |
| continue; |
| } |
| switch (errno) { |
| case ENOSYS: |
| process_vm_readv_not_supported = 1; |
| goto vm_readv_didnt_work; |
| case ESRCH: |
| /* the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| if (nread) { |
| perror_msg("umovestr: short read (%d < %d) @0x%lx", |
| nread, nread + len, addr); |
| } |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("process_vm_readv"); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| vm_readv_didnt_work: |
| |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); /* residue */ |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *)addr, 0); |
| switch (errno) { |
| case 0: |
| break; |
| case ESRCH: case EINVAL: |
| /* these could be seen if the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("umovestr: PTRACE_PEEKDATA pid:%d @0x%lx", |
| pid, addr); |
| return -1; |
| } |
| m = MIN(sizeof(long) - n, len); |
| memcpy(laddr, &u.x[n], m); |
| while (n & (sizeof(long) - 1)) |
| if (u.x[n++] == '\0') |
| return 1; |
| addr += sizeof(long); |
| laddr += m; |
| nread += m; |
| len -= m; |
| } |
| |
| while (len) { |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *)addr, 0); |
| switch (errno) { |
| case 0: |
| break; |
| case ESRCH: case EINVAL: |
| /* these could be seen if the process is gone */ |
| return -1; |
| case EFAULT: case EIO: case EPERM: |
| /* address space is inaccessible */ |
| if (nread) { |
| perror_msg("umovestr: short read (%d < %d) @0x%lx", |
| nread, nread + len, addr - nread); |
| } |
| return -1; |
| default: |
| /* all the rest is strange and should be reported */ |
| perror_msg("umovestr: PTRACE_PEEKDATA pid:%d @0x%lx", |
| pid, addr); |
| return -1; |
| } |
| m = MIN(sizeof(long), len); |
| memcpy(laddr, u.x, m); |
| /* "If a NUL char exists in this word" */ |
| if ((u.val - x01010101) & ~u.val & x80808080) |
| return 1; |
| addr += sizeof(long); |
| laddr += m; |
| nread += m; |
| len -= m; |
| } |
| return 0; |
| } |
| |
| int |
| upeek(int pid, long off, long *res) |
| { |
| long val; |
| |
| errno = 0; |
| val = ptrace(PTRACE_PEEKUSER, (pid_t)pid, (char *) off, 0); |
| if (val == -1 && errno) { |
| if (errno != ESRCH) { |
| perror_msg("upeek: PTRACE_PEEKUSER pid:%d @0x%lx)", pid, off); |
| } |
| return -1; |
| } |
| *res = val; |
| return 0; |
| } |
| |
| /* Note! On new kernels (about 2.5.46+), we use PTRACE_O_TRACECLONE |
| * and PTRACE_O_TRACE[V]FORK for tracing children. |
| * If you are adding a new arch which is only supported by newer kernels, |
| * you most likely don't need to add any code below |
| * beside a dummy "return 0" block in change_syscall(). |
| */ |
| |
| /* |
| * These #if's are huge, please indent them correctly. |
| * It's easy to get confused otherwise. |
| */ |
| |
| #include "syscall.h" |
| |
| #ifndef CLONE_PTRACE |
| # define CLONE_PTRACE 0x00002000 |
| #endif |
| #ifndef CLONE_VFORK |
| # define CLONE_VFORK 0x00004000 |
| #endif |
| #ifndef CLONE_VM |
| # define CLONE_VM 0x00000100 |
| #endif |
| |
| #ifdef IA64 |
| |
| typedef unsigned long *arg_setup_state; |
| |
| static int |
| arg_setup(struct tcb *tcp, arg_setup_state *state) |
| { |
| unsigned long cfm, sof, sol; |
| long bsp; |
| |
| if (ia64_ia32mode) { |
| /* Satisfy a false GCC warning. */ |
| *state = NULL; |
| return 0; |
| } |
| |
| if (upeek(tcp->pid, PT_AR_BSP, &bsp) < 0) |
| return -1; |
| if (upeek(tcp->pid, PT_CFM, (long *) &cfm) < 0) |
| return -1; |
| |
| sof = (cfm >> 0) & 0x7f; |
| sol = (cfm >> 7) & 0x7f; |
| bsp = (long) ia64_rse_skip_regs((unsigned long *) bsp, -sof + sol); |
| |
| *state = (unsigned long *) bsp; |
| return 0; |
| } |
| |
| # define arg_finish_change(tcp, state) 0 |
| |
| static int |
| get_arg0(struct tcb *tcp, arg_setup_state *state, long *valp) |
| { |
| int ret; |
| |
| if (ia64_ia32mode) |
| ret = upeek(tcp->pid, PT_R11, valp); |
| else |
| ret = umoven(tcp, |
| (unsigned long) ia64_rse_skip_regs(*state, 0), |
| sizeof(long), (void *) valp); |
| return ret; |
| } |
| |
| static int |
| get_arg1(struct tcb *tcp, arg_setup_state *state, long *valp) |
| { |
| int ret; |
| |
| if (ia64_ia32mode) |
| ret = upeek(tcp->pid, PT_R9, valp); |
| else |
| ret = umoven(tcp, |
| (unsigned long) ia64_rse_skip_regs(*state, 1), |
| sizeof(long), (void *) valp); |
| return ret; |
| } |
| |
| static int |
| set_arg0(struct tcb *tcp, arg_setup_state *state, long val) |
| { |
| int req = PTRACE_POKEDATA; |
| void *ap; |
| |
| if (ia64_ia32mode) { |
| ap = (void *) (intptr_t) PT_R11; /* r11 == EBX */ |
| req = PTRACE_POKEUSER; |
| } else |
| ap = ia64_rse_skip_regs(*state, 0); |
| errno = 0; |
| ptrace(req, tcp->pid, ap, val); |
| return errno ? -1 : 0; |
| } |
| |
| static int |
| set_arg1(struct tcb *tcp, arg_setup_state *state, long val) |
| { |
| int req = PTRACE_POKEDATA; |
| void *ap; |
| |
| if (ia64_ia32mode) { |
| ap = (void *) (intptr_t) PT_R9; /* r9 == ECX */ |
| req = PTRACE_POKEUSER; |
| } else |
| ap = ia64_rse_skip_regs(*state, 1); |
| errno = 0; |
| ptrace(req, tcp->pid, ap, val); |
| return errno ? -1 : 0; |
| } |
| |
| /* ia64 does not return the input arguments from functions (and syscalls) |
| according to ia64 RSE (Register Stack Engine) behavior. */ |
| |
| # define restore_arg0(tcp, state, val) ((void) (state), 0) |
| # define restore_arg1(tcp, state, val) ((void) (state), 0) |
| |
| #elif defined(SPARC) || defined(SPARC64) |
| |
| # if defined(SPARC64) |
| # undef PTRACE_GETREGS |
| # define PTRACE_GETREGS PTRACE_GETREGS64 |
| # undef PTRACE_SETREGS |
| # define PTRACE_SETREGS PTRACE_SETREGS64 |
| # endif |
| |
| typedef struct pt_regs arg_setup_state; |
| |
| # define arg_setup(tcp, state) \ |
| (ptrace(PTRACE_GETREGS, (tcp)->pid, (char *) (state), 0)) |
| # define arg_finish_change(tcp, state) \ |
| (ptrace(PTRACE_SETREGS, (tcp)->pid, (char *) (state), 0)) |
| |
| # define get_arg0(tcp, state, valp) (*(valp) = (state)->u_regs[U_REG_O0], 0) |
| # define get_arg1(tcp, state, valp) (*(valp) = (state)->u_regs[U_REG_O1], 0) |
| # define set_arg0(tcp, state, val) ((state)->u_regs[U_REG_O0] = (val), 0) |
| # define set_arg1(tcp, state, val) ((state)->u_regs[U_REG_O1] = (val), 0) |
| # define restore_arg0(tcp, state, val) 0 |
| |
| #else /* other architectures */ |
| |
| # if defined S390 || defined S390X |
| /* Note: this is only true for the `clone' system call, which handles |
| arguments specially. We could as well say that its first two arguments |
| are swapped relative to other architectures, but that would just be |
| another #ifdef in the calls. */ |
| # define arg0_offset PT_GPR3 |
| # define arg1_offset PT_ORIGGPR2 |
| # define restore_arg0(tcp, state, val) ((void) (state), 0) |
| # define restore_arg1(tcp, state, val) ((void) (state), 0) |
| # define arg0_index 1 |
| # define arg1_index 0 |
| # elif defined(ALPHA) || defined(MIPS) |
| # define arg0_offset REG_A0 |
| # define arg1_offset (REG_A0+1) |
| # elif defined(POWERPC) |
| # define arg0_offset (sizeof(unsigned long)*PT_R3) |
| # define arg1_offset (sizeof(unsigned long)*PT_R4) |
| # define restore_arg0(tcp, state, val) ((void) (state), 0) |
| # elif defined(HPPA) |
| # define arg0_offset PT_GR26 |
| # define arg1_offset (PT_GR26-4) |
| # elif defined(X86_64) || defined(X32) |
| # define arg0_offset ((long)(8*(current_personality ? RBX : RDI))) |
| # define arg1_offset ((long)(8*(current_personality ? RCX : RSI))) |
| # elif defined(SH) |
| # define arg0_offset (4*(REG_REG0+4)) |
| # define arg1_offset (4*(REG_REG0+5)) |
| # elif defined(SH64) |
| /* ABI defines arg0 & 1 in r2 & r3 */ |
| # define arg0_offset (REG_OFFSET+16) |
| # define arg1_offset (REG_OFFSET+24) |
| # define restore_arg0(tcp, state, val) 0 |
| # elif defined CRISV10 || defined CRISV32 |
| # define arg0_offset (4*PT_R11) |
| # define arg1_offset (4*PT_ORIG_R10) |
| # define restore_arg0(tcp, state, val) 0 |
| # define restore_arg1(tcp, state, val) 0 |
| # define arg0_index 1 |
| # define arg1_index 0 |
| # else |
| # define arg0_offset 0 |
| # define arg1_offset 4 |
| # if defined ARM |
| # define restore_arg0(tcp, state, val) 0 |
| # endif |
| # endif |
| |
| typedef int arg_setup_state; |
| |
| # define arg_setup(tcp, state) (0) |
| # define arg_finish_change(tcp, state) 0 |
| # define get_arg0(tcp, cookie, valp) (upeek((tcp)->pid, arg0_offset, (valp))) |
| # define get_arg1(tcp, cookie, valp) (upeek((tcp)->pid, arg1_offset, (valp))) |
| |
| static int |
| set_arg0(struct tcb *tcp, void *cookie, long val) |
| { |
| return ptrace(PTRACE_POKEUSER, tcp->pid, (char*)arg0_offset, val); |
| } |
| |
| static int |
| set_arg1(struct tcb *tcp, void *cookie, long val) |
| { |
| return ptrace(PTRACE_POKEUSER, tcp->pid, (char*)arg1_offset, val); |
| } |
| |
| #endif /* architectures */ |
| |
| #ifndef restore_arg0 |
| # define restore_arg0(tcp, state, val) set_arg0((tcp), (state), (val)) |
| #endif |
| #ifndef restore_arg1 |
| # define restore_arg1(tcp, state, val) set_arg1((tcp), (state), (val)) |
| #endif |
| |
| #ifndef arg0_index |
| # define arg0_index 0 |
| # define arg1_index 1 |
| #endif |
| |
| static int |
| change_syscall(struct tcb *tcp, arg_setup_state *state, int new) |
| { |
| #if defined(I386) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(ORIG_EAX * 4), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(X86_64) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(ORIG_RAX * 8), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(X32) |
| /* setbpt/clearbpt never used: */ |
| /* X32 is only supported since about linux-3.0.30 */ |
| #elif defined(POWERPC) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, |
| (char*)(sizeof(unsigned long)*PT_R0), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(S390) || defined(S390X) |
| /* s390 linux after 2.4.7 has a hook in entry.S to allow this */ |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(PT_GPR2), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(M68K) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(4*PT_ORIG_D0), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(SPARC) || defined(SPARC64) |
| state->u_regs[U_REG_G1] = new; |
| return 0; |
| #elif defined(MIPS) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(REG_V0), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(ALPHA) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(REG_A3), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(AVR32) |
| /* setbpt/clearbpt never used: */ |
| /* AVR32 is only supported since about linux-2.6.19 */ |
| #elif defined(BFIN) |
| /* setbpt/clearbpt never used: */ |
| /* Blackfin is only supported since about linux-2.6.23 */ |
| #elif defined(IA64) |
| if (ia64_ia32mode) { |
| switch (new) { |
| case 2: |
| break; /* x86 SYS_fork */ |
| case SYS_clone: |
| new = 120; |
| break; |
| default: |
| fprintf(stderr, "%s: unexpected syscall %d\n", |
| __FUNCTION__, new); |
| return -1; |
| } |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(PT_R1), new) < 0) |
| return -1; |
| } else if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(PT_R15), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(HPPA) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(PT_GR20), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(SH) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(4*(REG_REG0+3)), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(SH64) |
| /* Top half of reg encodes the no. of args n as 0x1n. |
| Assume 0 args as kernel never actually checks... */ |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(REG_SYSCALL), |
| 0x100000 | new) < 0) |
| return -1; |
| return 0; |
| #elif defined(CRISV10) || defined(CRISV32) |
| if (ptrace(PTRACE_POKEUSER, tcp->pid, (char*)(4*PT_R9), new) < 0) |
| return -1; |
| return 0; |
| #elif defined(ARM) |
| /* Some kernels support this, some (pre-2.6.16 or so) don't. */ |
| # ifndef PTRACE_SET_SYSCALL |
| # define PTRACE_SET_SYSCALL 23 |
| # endif |
| if (ptrace(PTRACE_SET_SYSCALL, tcp->pid, 0, new & 0xffff) != 0) |
| return -1; |
| return 0; |
| #elif defined(AARCH64) |
| /* setbpt/clearbpt never used: */ |
| /* AARCH64 is only supported since about linux-3.0.31 */ |
| #elif defined(TILE) |
| /* setbpt/clearbpt never used: */ |
| /* Tilera CPUs are only supported since about linux-2.6.34 */ |
| #elif defined(MICROBLAZE) |
| /* setbpt/clearbpt never used: */ |
| /* microblaze is only supported since about linux-2.6.30 */ |
| #elif defined(OR1K) |
| /* never reached; OR1K is only supported by kernels since 3.1.0. */ |
| #elif defined(METAG) |
| /* setbpt/clearbpt never used: */ |
| /* Meta is only supported since linux-3.7 */ |
| #elif defined(XTENSA) |
| /* setbpt/clearbpt never used: */ |
| /* Xtensa is only supported since linux 2.6.13 */ |
| #elif defined(ARC) |
| /* setbpt/clearbpt never used: */ |
| /* ARC only supported since 3.9 */ |
| #else |
| #warning Do not know how to handle change_syscall for this architecture |
| #endif /* architecture */ |
| return -1; |
| } |
| |
| int |
| setbpt(struct tcb *tcp) |
| { |
| static int clone_scno[SUPPORTED_PERSONALITIES] = { SYS_clone }; |
| arg_setup_state state; |
| |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: TCB already set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| |
| /* |
| * It's a silly kludge to initialize this with a search at runtime. |
| * But it's better than maintaining another magic thing in the |
| * godforsaken tables. |
| */ |
| if (clone_scno[current_personality] == 0) { |
| int i; |
| for (i = 0; i < nsyscalls; ++i) |
| if (sysent[i].sys_func == sys_clone) { |
| clone_scno[current_personality] = i; |
| break; |
| } |
| } |
| |
| if (tcp->s_ent->sys_func == sys_fork || |
| tcp->s_ent->sys_func == sys_vfork) { |
| if (arg_setup(tcp, &state) < 0 |
| || get_arg0(tcp, &state, &tcp->inst[0]) < 0 |
| || get_arg1(tcp, &state, &tcp->inst[1]) < 0 |
| || change_syscall(tcp, &state, |
| clone_scno[current_personality]) < 0 |
| || set_arg0(tcp, &state, CLONE_PTRACE|SIGCHLD) < 0 |
| || set_arg1(tcp, &state, 0) < 0 |
| || arg_finish_change(tcp, &state) < 0) |
| return -1; |
| tcp->u_arg[arg0_index] = CLONE_PTRACE|SIGCHLD; |
| tcp->u_arg[arg1_index] = 0; |
| tcp->flags |= TCB_BPTSET; |
| return 0; |
| } |
| |
| if (tcp->s_ent->sys_func == sys_clone) { |
| /* ia64 calls directly `clone (CLONE_VFORK | CLONE_VM)' |
| contrary to x86 vfork above. Even on x86 we turn the |
| vfork semantics into plain fork - each application must not |
| depend on the vfork specifics according to POSIX. We would |
| hang waiting for the parent resume otherwise. We need to |
| clear also CLONE_VM but only in the CLONE_VFORK case as |
| otherwise we would break pthread_create. */ |
| |
| long new_arg0 = (tcp->u_arg[arg0_index] | CLONE_PTRACE); |
| if (new_arg0 & CLONE_VFORK) |
| new_arg0 &= ~(unsigned long)(CLONE_VFORK | CLONE_VM); |
| if (arg_setup(tcp, &state) < 0 |
| || set_arg0(tcp, &state, new_arg0) < 0 |
| || arg_finish_change(tcp, &state) < 0) |
| return -1; |
| tcp->inst[0] = tcp->u_arg[arg0_index]; |
| tcp->inst[1] = tcp->u_arg[arg1_index]; |
| tcp->flags |= TCB_BPTSET; |
| return 0; |
| } |
| |
| fprintf(stderr, "PANIC: setbpt for syscall %ld on %u???\n", |
| tcp->scno, tcp->pid); |
| return -1; |
| } |
| |
| int |
| clearbpt(struct tcb *tcp) |
| { |
| arg_setup_state state; |
| if (arg_setup(tcp, &state) < 0 |
| || change_syscall(tcp, &state, tcp->scno) < 0 |
| || restore_arg0(tcp, &state, tcp->inst[0]) < 0 |
| || restore_arg1(tcp, &state, tcp->inst[1]) < 0 |
| || arg_finish_change(tcp, &state)) |
| if (errno != ESRCH) |
| return -1; |
| tcp->flags &= ~TCB_BPTSET; |
| return 0; |
| } |