| /* |
| * Copyright (c) 2001 |
| * Fortress Technologies, Inc. All rights reserved. |
| * Charlie Lenahan (clenahan@fortresstech.com) |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that: (1) source code distributions |
| * retain the above copyright notice and this paragraph in its entirety, (2) |
| * distributions including binary code include the above copyright notice and |
| * this paragraph in its entirety in the documentation or other materials |
| * provided with the distribution, and (3) all advertising materials mentioning |
| * features or use of this software display the following acknowledgement: |
| * ``This product includes software developed by the University of California, |
| * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of |
| * the University nor the names of its contributors may be used to endorse |
| * or promote products derived from this software without specific prior |
| * written permission. |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| */ |
| |
| #ifndef lint |
| static const char rcsid[] _U_ = |
| "@(#) $Header: /tcpdump/master/tcpdump/print-802_11.c,v 1.49 2007-12-29 23:25:02 guy Exp $ (LBL)"; |
| #endif |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <tcpdump-stdinc.h> |
| |
| #include <stdio.h> |
| #include <pcap.h> |
| #include <string.h> |
| |
| #include "interface.h" |
| #include "addrtoname.h" |
| #include "ethertype.h" |
| |
| #include "extract.h" |
| |
| #include "cpack.h" |
| |
| #include "ieee802_11.h" |
| #include "ieee802_11_radio.h" |
| |
| /* Radiotap state */ |
| /* This is used to save state when parsing/processing parameters */ |
| struct radiotap_state |
| { |
| u_int32_t present; |
| |
| u_int8_t rate; |
| }; |
| |
| #define PRINT_SSID(p) \ |
| if (p.ssid_present) { \ |
| printf(" ("); \ |
| fn_print(p.ssid.ssid, NULL); \ |
| printf(")"); \ |
| } |
| |
| #define PRINT_RATE(_sep, _r, _suf) \ |
| printf("%s%2.1f%s", _sep, (.5 * ((_r) & 0x7f)), _suf) |
| #define PRINT_RATES(p) \ |
| if (p.rates_present) { \ |
| int z; \ |
| const char *sep = " ["; \ |
| for (z = 0; z < p.rates.length ; z++) { \ |
| PRINT_RATE(sep, p.rates.rate[z], \ |
| (p.rates.rate[z] & 0x80 ? "*" : "")); \ |
| sep = " "; \ |
| } \ |
| if (p.rates.length != 0) \ |
| printf(" Mbit]"); \ |
| } |
| |
| #define PRINT_DS_CHANNEL(p) \ |
| if (p.ds_present) \ |
| printf(" CH: %u", p.ds.channel); \ |
| printf("%s", \ |
| CAPABILITY_PRIVACY(p.capability_info) ? ", PRIVACY" : "" ); |
| |
| #define MAX_MCS_INDEX 76 |
| |
| /* |
| * Indices are: |
| * |
| * the MCS index (0-76); |
| * |
| * 0 for 20 MHz, 1 for 40 MHz; |
| * |
| * 0 for a long guard interval, 1 for a short guard interval. |
| */ |
| static const float ieee80211_float_htrates[MAX_MCS_INDEX+1][2][2] = { |
| /* MCS 0 */ |
| { /* 20 Mhz */ { 6.5, /* SGI */ 7.2, }, |
| /* 40 Mhz */ { 13.5, /* SGI */ 15.0, }, |
| }, |
| |
| /* MCS 1 */ |
| { /* 20 Mhz */ { 13.0, /* SGI */ 14.4, }, |
| /* 40 Mhz */ { 27.0, /* SGI */ 30.0, }, |
| }, |
| |
| /* MCS 2 */ |
| { /* 20 Mhz */ { 19.5, /* SGI */ 21.7, }, |
| /* 40 Mhz */ { 40.5, /* SGI */ 45.0, }, |
| }, |
| |
| /* MCS 3 */ |
| { /* 20 Mhz */ { 26.0, /* SGI */ 28.9, }, |
| /* 40 Mhz */ { 54.0, /* SGI */ 60.0, }, |
| }, |
| |
| /* MCS 4 */ |
| { /* 20 Mhz */ { 39.0, /* SGI */ 43.3, }, |
| /* 40 Mhz */ { 81.0, /* SGI */ 90.0, }, |
| }, |
| |
| /* MCS 5 */ |
| { /* 20 Mhz */ { 52.0, /* SGI */ 57.8, }, |
| /* 40 Mhz */ { 108.0, /* SGI */ 120.0, }, |
| }, |
| |
| /* MCS 6 */ |
| { /* 20 Mhz */ { 58.5, /* SGI */ 65.0, }, |
| /* 40 Mhz */ { 121.5, /* SGI */ 135.0, }, |
| }, |
| |
| /* MCS 7 */ |
| { /* 20 Mhz */ { 65.0, /* SGI */ 72.2, }, |
| /* 40 Mhz */ { 135.0, /* SGI */ 150.0, }, |
| }, |
| |
| /* MCS 8 */ |
| { /* 20 Mhz */ { 13.0, /* SGI */ 14.4, }, |
| /* 40 Mhz */ { 27.0, /* SGI */ 30.0, }, |
| }, |
| |
| /* MCS 9 */ |
| { /* 20 Mhz */ { 26.0, /* SGI */ 28.9, }, |
| /* 40 Mhz */ { 54.0, /* SGI */ 60.0, }, |
| }, |
| |
| /* MCS 10 */ |
| { /* 20 Mhz */ { 39.0, /* SGI */ 43.3, }, |
| /* 40 Mhz */ { 81.0, /* SGI */ 90.0, }, |
| }, |
| |
| /* MCS 11 */ |
| { /* 20 Mhz */ { 52.0, /* SGI */ 57.8, }, |
| /* 40 Mhz */ { 108.0, /* SGI */ 120.0, }, |
| }, |
| |
| /* MCS 12 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 13 */ |
| { /* 20 Mhz */ { 104.0, /* SGI */ 115.6, }, |
| /* 40 Mhz */ { 216.0, /* SGI */ 240.0, }, |
| }, |
| |
| /* MCS 14 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 15 */ |
| { /* 20 Mhz */ { 130.0, /* SGI */ 144.4, }, |
| /* 40 Mhz */ { 270.0, /* SGI */ 300.0, }, |
| }, |
| |
| /* MCS 16 */ |
| { /* 20 Mhz */ { 19.5, /* SGI */ 21.7, }, |
| /* 40 Mhz */ { 40.5, /* SGI */ 45.0, }, |
| }, |
| |
| /* MCS 17 */ |
| { /* 20 Mhz */ { 39.0, /* SGI */ 43.3, }, |
| /* 40 Mhz */ { 81.0, /* SGI */ 90.0, }, |
| }, |
| |
| /* MCS 18 */ |
| { /* 20 Mhz */ { 58.5, /* SGI */ 65.0, }, |
| /* 40 Mhz */ { 121.5, /* SGI */ 135.0, }, |
| }, |
| |
| /* MCS 19 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 20 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 21 */ |
| { /* 20 Mhz */ { 156.0, /* SGI */ 173.3, }, |
| /* 40 Mhz */ { 324.0, /* SGI */ 360.0, }, |
| }, |
| |
| /* MCS 22 */ |
| { /* 20 Mhz */ { 175.5, /* SGI */ 195.0, }, |
| /* 40 Mhz */ { 364.5, /* SGI */ 405.0, }, |
| }, |
| |
| /* MCS 23 */ |
| { /* 20 Mhz */ { 195.0, /* SGI */ 216.7, }, |
| /* 40 Mhz */ { 405.0, /* SGI */ 450.0, }, |
| }, |
| |
| /* MCS 24 */ |
| { /* 20 Mhz */ { 26.0, /* SGI */ 28.9, }, |
| /* 40 Mhz */ { 54.0, /* SGI */ 60.0, }, |
| }, |
| |
| /* MCS 25 */ |
| { /* 20 Mhz */ { 52.0, /* SGI */ 57.8, }, |
| /* 40 Mhz */ { 108.0, /* SGI */ 120.0, }, |
| }, |
| |
| /* MCS 26 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 27 */ |
| { /* 20 Mhz */ { 104.0, /* SGI */ 115.6, }, |
| /* 40 Mhz */ { 216.0, /* SGI */ 240.0, }, |
| }, |
| |
| /* MCS 28 */ |
| { /* 20 Mhz */ { 156.0, /* SGI */ 173.3, }, |
| /* 40 Mhz */ { 324.0, /* SGI */ 360.0, }, |
| }, |
| |
| /* MCS 29 */ |
| { /* 20 Mhz */ { 208.0, /* SGI */ 231.1, }, |
| /* 40 Mhz */ { 432.0, /* SGI */ 480.0, }, |
| }, |
| |
| /* MCS 30 */ |
| { /* 20 Mhz */ { 234.0, /* SGI */ 260.0, }, |
| /* 40 Mhz */ { 486.0, /* SGI */ 540.0, }, |
| }, |
| |
| /* MCS 31 */ |
| { /* 20 Mhz */ { 260.0, /* SGI */ 288.9, }, |
| /* 40 Mhz */ { 540.0, /* SGI */ 600.0, }, |
| }, |
| |
| /* MCS 32 */ |
| { /* 20 Mhz */ { 0.0, /* SGI */ 0.0, }, /* not valid */ |
| /* 40 Mhz */ { 6.0, /* SGI */ 6.7, }, |
| }, |
| |
| /* MCS 33 */ |
| { /* 20 Mhz */ { 39.0, /* SGI */ 43.3, }, |
| /* 40 Mhz */ { 81.0, /* SGI */ 90.0, }, |
| }, |
| |
| /* MCS 34 */ |
| { /* 20 Mhz */ { 52.0, /* SGI */ 57.8, }, |
| /* 40 Mhz */ { 108.0, /* SGI */ 120.0, }, |
| }, |
| |
| /* MCS 35 */ |
| { /* 20 Mhz */ { 65.0, /* SGI */ 72.2, }, |
| /* 40 Mhz */ { 135.0, /* SGI */ 150.0, }, |
| }, |
| |
| /* MCS 36 */ |
| { /* 20 Mhz */ { 58.5, /* SGI */ 65.0, }, |
| /* 40 Mhz */ { 121.5, /* SGI */ 135.0, }, |
| }, |
| |
| /* MCS 37 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 38 */ |
| { /* 20 Mhz */ { 97.5, /* SGI */ 108.3, }, |
| /* 40 Mhz */ { 202.5, /* SGI */ 225.0, }, |
| }, |
| |
| /* MCS 39 */ |
| { /* 20 Mhz */ { 52.0, /* SGI */ 57.8, }, |
| /* 40 Mhz */ { 108.0, /* SGI */ 120.0, }, |
| }, |
| |
| /* MCS 40 */ |
| { /* 20 Mhz */ { 65.0, /* SGI */ 72.2, }, |
| /* 40 Mhz */ { 135.0, /* SGI */ 150.0, }, |
| }, |
| |
| /* MCS 41 */ |
| { /* 20 Mhz */ { 65.0, /* SGI */ 72.2, }, |
| /* 40 Mhz */ { 135.0, /* SGI */ 150.0, }, |
| }, |
| |
| /* MCS 42 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 43 */ |
| { /* 20 Mhz */ { 91.0, /* SGI */ 101.1, }, |
| /* 40 Mhz */ { 189.0, /* SGI */ 210.0, }, |
| }, |
| |
| /* MCS 44 */ |
| { /* 20 Mhz */ { 91.0, /* SGI */ 101.1, }, |
| /* 40 Mhz */ { 189.0, /* SGI */ 210.0, }, |
| }, |
| |
| /* MCS 45 */ |
| { /* 20 Mhz */ { 104.0, /* SGI */ 115.6, }, |
| /* 40 Mhz */ { 216.0, /* SGI */ 240.0, }, |
| }, |
| |
| /* MCS 46 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 47 */ |
| { /* 20 Mhz */ { 97.5, /* SGI */ 108.3, }, |
| /* 40 Mhz */ { 202.5, /* SGI */ 225.0, }, |
| }, |
| |
| /* MCS 48 */ |
| { /* 20 Mhz */ { 97.5, /* SGI */ 108.3, }, |
| /* 40 Mhz */ { 202.5, /* SGI */ 225.0, }, |
| }, |
| |
| /* MCS 49 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 50 */ |
| { /* 20 Mhz */ { 136.5, /* SGI */ 151.7, }, |
| /* 40 Mhz */ { 283.5, /* SGI */ 315.0, }, |
| }, |
| |
| /* MCS 51 */ |
| { /* 20 Mhz */ { 136.5, /* SGI */ 151.7, }, |
| /* 40 Mhz */ { 283.5, /* SGI */ 315.0, }, |
| }, |
| |
| /* MCS 52 */ |
| { /* 20 Mhz */ { 156.0, /* SGI */ 173.3, }, |
| /* 40 Mhz */ { 324.0, /* SGI */ 360.0, }, |
| }, |
| |
| /* MCS 53 */ |
| { /* 20 Mhz */ { 65.0, /* SGI */ 72.2, }, |
| /* 40 Mhz */ { 135.0, /* SGI */ 150.0, }, |
| }, |
| |
| /* MCS 54 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 55 */ |
| { /* 20 Mhz */ { 91.0, /* SGI */ 101.1, }, |
| /* 40 Mhz */ { 189.0, /* SGI */ 210.0, }, |
| }, |
| |
| /* MCS 56 */ |
| { /* 20 Mhz */ { 78.0, /* SGI */ 86.7, }, |
| /* 40 Mhz */ { 162.0, /* SGI */ 180.0, }, |
| }, |
| |
| /* MCS 57 */ |
| { /* 20 Mhz */ { 91.0, /* SGI */ 101.1, }, |
| /* 40 Mhz */ { 189.0, /* SGI */ 210.0, }, |
| }, |
| |
| /* MCS 58 */ |
| { /* 20 Mhz */ { 104.0, /* SGI */ 115.6, }, |
| /* 40 Mhz */ { 216.0, /* SGI */ 240.0, }, |
| }, |
| |
| /* MCS 59 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 60 */ |
| { /* 20 Mhz */ { 104.0, /* SGI */ 115.6, }, |
| /* 40 Mhz */ { 216.0, /* SGI */ 240.0, }, |
| }, |
| |
| /* MCS 61 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 62 */ |
| { /* 20 Mhz */ { 130.0, /* SGI */ 144.4, }, |
| /* 40 Mhz */ { 270.0, /* SGI */ 300.0, }, |
| }, |
| |
| /* MCS 63 */ |
| { /* 20 Mhz */ { 130.0, /* SGI */ 144.4, }, |
| /* 40 Mhz */ { 270.0, /* SGI */ 300.0, }, |
| }, |
| |
| /* MCS 64 */ |
| { /* 20 Mhz */ { 143.0, /* SGI */ 158.9, }, |
| /* 40 Mhz */ { 297.0, /* SGI */ 330.0, }, |
| }, |
| |
| /* MCS 65 */ |
| { /* 20 Mhz */ { 97.5, /* SGI */ 108.3, }, |
| /* 40 Mhz */ { 202.5, /* SGI */ 225.0, }, |
| }, |
| |
| /* MCS 66 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 67 */ |
| { /* 20 Mhz */ { 136.5, /* SGI */ 151.7, }, |
| /* 40 Mhz */ { 283.5, /* SGI */ 315.0, }, |
| }, |
| |
| /* MCS 68 */ |
| { /* 20 Mhz */ { 117.0, /* SGI */ 130.0, }, |
| /* 40 Mhz */ { 243.0, /* SGI */ 270.0, }, |
| }, |
| |
| /* MCS 69 */ |
| { /* 20 Mhz */ { 136.5, /* SGI */ 151.7, }, |
| /* 40 Mhz */ { 283.5, /* SGI */ 315.0, }, |
| }, |
| |
| /* MCS 70 */ |
| { /* 20 Mhz */ { 156.0, /* SGI */ 173.3, }, |
| /* 40 Mhz */ { 324.0, /* SGI */ 360.0, }, |
| }, |
| |
| /* MCS 71 */ |
| { /* 20 Mhz */ { 175.5, /* SGI */ 195.0, }, |
| /* 40 Mhz */ { 364.5, /* SGI */ 405.0, }, |
| }, |
| |
| /* MCS 72 */ |
| { /* 20 Mhz */ { 156.0, /* SGI */ 173.3, }, |
| /* 40 Mhz */ { 324.0, /* SGI */ 360.0, }, |
| }, |
| |
| /* MCS 73 */ |
| { /* 20 Mhz */ { 175.5, /* SGI */ 195.0, }, |
| /* 40 Mhz */ { 364.5, /* SGI */ 405.0, }, |
| }, |
| |
| /* MCS 74 */ |
| { /* 20 Mhz */ { 195.0, /* SGI */ 216.7, }, |
| /* 40 Mhz */ { 405.0, /* SGI */ 450.0, }, |
| }, |
| |
| /* MCS 75 */ |
| { /* 20 Mhz */ { 195.0, /* SGI */ 216.7, }, |
| /* 40 Mhz */ { 405.0, /* SGI */ 450.0, }, |
| }, |
| |
| /* MCS 76 */ |
| { /* 20 Mhz */ { 214.5, /* SGI */ 238.3, }, |
| /* 40 Mhz */ { 445.5, /* SGI */ 495.0, }, |
| }, |
| }; |
| |
| static const char *auth_alg_text[]={"Open System","Shared Key","EAP"}; |
| #define NUM_AUTH_ALGS (sizeof auth_alg_text / sizeof auth_alg_text[0]) |
| |
| static const char *status_text[] = { |
| "Successful", /* 0 */ |
| "Unspecified failure", /* 1 */ |
| "Reserved", /* 2 */ |
| "Reserved", /* 3 */ |
| "Reserved", /* 4 */ |
| "Reserved", /* 5 */ |
| "Reserved", /* 6 */ |
| "Reserved", /* 7 */ |
| "Reserved", /* 8 */ |
| "Reserved", /* 9 */ |
| "Cannot Support all requested capabilities in the Capability " |
| "Information field", /* 10 */ |
| "Reassociation denied due to inability to confirm that association " |
| "exists", /* 11 */ |
| "Association denied due to reason outside the scope of the " |
| "standard", /* 12 */ |
| "Responding station does not support the specified authentication " |
| "algorithm ", /* 13 */ |
| "Received an Authentication frame with authentication transaction " |
| "sequence number out of expected sequence", /* 14 */ |
| "Authentication rejected because of challenge failure", /* 15 */ |
| "Authentication rejected due to timeout waiting for next frame in " |
| "sequence", /* 16 */ |
| "Association denied because AP is unable to handle additional" |
| "associated stations", /* 17 */ |
| "Association denied due to requesting station not supporting all of " |
| "the data rates in BSSBasicRateSet parameter", /* 18 */ |
| "Association denied due to requesting station not supporting " |
| "short preamble operation", /* 19 */ |
| "Association denied due to requesting station not supporting " |
| "PBCC encoding", /* 20 */ |
| "Association denied due to requesting station not supporting " |
| "channel agility", /* 21 */ |
| "Association request rejected because Spectrum Management " |
| "capability is required", /* 22 */ |
| "Association request rejected because the information in the " |
| "Power Capability element is unacceptable", /* 23 */ |
| "Association request rejected because the information in the " |
| "Supported Channels element is unacceptable", /* 24 */ |
| "Association denied due to requesting station not supporting " |
| "short slot operation", /* 25 */ |
| "Association denied due to requesting station not supporting " |
| "DSSS-OFDM operation", /* 26 */ |
| "Association denied because the requested STA does not support HT " |
| "features", /* 27 */ |
| "Reserved", /* 28 */ |
| "Association denied because the requested STA does not support " |
| "the PCO transition time required by the AP", /* 29 */ |
| "Reserved", /* 30 */ |
| "Reserved", /* 31 */ |
| "Unspecified, QoS-related failure", /* 32 */ |
| "Association denied due to QAP having insufficient bandwidth " |
| "to handle another QSTA", /* 33 */ |
| "Association denied due to excessive frame loss rates and/or " |
| "poor conditions on current operating channel", /* 34 */ |
| "Association (with QBSS) denied due to requesting station not " |
| "supporting the QoS facility", /* 35 */ |
| "Association denied due to requesting station not supporting " |
| "Block Ack", /* 36 */ |
| "The request has been declined", /* 37 */ |
| "The request has not been successful as one or more parameters " |
| "have invalid values", /* 38 */ |
| "The TS has not been created because the request cannot be honored. " |
| "However, a suggested TSPEC is provided so that the initiating QSTA" |
| "may attempt to set another TS with the suggested changes to the " |
| "TSPEC", /* 39 */ |
| "Invalid Information Element", /* 40 */ |
| "Group Cipher is not valid", /* 41 */ |
| "Pairwise Cipher is not valid", /* 42 */ |
| "AKMP is not valid", /* 43 */ |
| "Unsupported RSN IE version", /* 44 */ |
| "Invalid RSN IE Capabilities", /* 45 */ |
| "Cipher suite is rejected per security policy", /* 46 */ |
| "The TS has not been created. However, the HC may be capable of " |
| "creating a TS, in response to a request, after the time indicated " |
| "in the TS Delay element", /* 47 */ |
| "Direct Link is not allowed in the BSS by policy", /* 48 */ |
| "Destination STA is not present within this QBSS.", /* 49 */ |
| "The Destination STA is not a QSTA.", /* 50 */ |
| |
| }; |
| #define NUM_STATUSES (sizeof status_text / sizeof status_text[0]) |
| |
| static const char *reason_text[] = { |
| "Reserved", /* 0 */ |
| "Unspecified reason", /* 1 */ |
| "Previous authentication no longer valid", /* 2 */ |
| "Deauthenticated because sending station is leaving (or has left) " |
| "IBSS or ESS", /* 3 */ |
| "Disassociated due to inactivity", /* 4 */ |
| "Disassociated because AP is unable to handle all currently " |
| " associated stations", /* 5 */ |
| "Class 2 frame received from nonauthenticated station", /* 6 */ |
| "Class 3 frame received from nonassociated station", /* 7 */ |
| "Disassociated because sending station is leaving " |
| "(or has left) BSS", /* 8 */ |
| "Station requesting (re)association is not authenticated with " |
| "responding station", /* 9 */ |
| "Disassociated because the information in the Power Capability " |
| "element is unacceptable", /* 10 */ |
| "Disassociated because the information in the SupportedChannels " |
| "element is unacceptable", /* 11 */ |
| "Invalid Information Element", /* 12 */ |
| "Reserved", /* 13 */ |
| "Michael MIC failure", /* 14 */ |
| "4-Way Handshake timeout", /* 15 */ |
| "Group key update timeout", /* 16 */ |
| "Information element in 4-Way Handshake different from (Re)Association" |
| "Request/Probe Response/Beacon", /* 17 */ |
| "Group Cipher is not valid", /* 18 */ |
| "AKMP is not valid", /* 20 */ |
| "Unsupported RSN IE version", /* 21 */ |
| "Invalid RSN IE Capabilities", /* 22 */ |
| "IEEE 802.1X Authentication failed", /* 23 */ |
| "Cipher suite is rejected per security policy", /* 24 */ |
| "Reserved", /* 25 */ |
| "Reserved", /* 26 */ |
| "Reserved", /* 27 */ |
| "Reserved", /* 28 */ |
| "Reserved", /* 29 */ |
| "Reserved", /* 30 */ |
| "TS deleted because QoS AP lacks sufficient bandwidth for this " |
| "QoS STA due to a change in BSS service characteristics or " |
| "operational mode (e.g. an HT BSS change from 40 MHz channel " |
| "to 20 MHz channel)", /* 31 */ |
| "Disassociated for unspecified, QoS-related reason", /* 32 */ |
| "Disassociated because QoS AP lacks sufficient bandwidth for this " |
| "QoS STA", /* 33 */ |
| "Disassociated because of excessive number of frames that need to be " |
| "acknowledged, but are not acknowledged for AP transmissions " |
| "and/or poor channel conditions", /* 34 */ |
| "Disassociated because STA is transmitting outside the limits " |
| "of its TXOPs", /* 35 */ |
| "Requested from peer STA as the STA is leaving the BSS " |
| "(or resetting)", /* 36 */ |
| "Requested from peer STA as it does not want to use the " |
| "mechanism", /* 37 */ |
| "Requested from peer STA as the STA received frames using the " |
| "mechanism for which a set up is required", /* 38 */ |
| "Requested from peer STA due to time out", /* 39 */ |
| "Reserved", /* 40 */ |
| "Reserved", /* 41 */ |
| "Reserved", /* 42 */ |
| "Reserved", /* 43 */ |
| "Reserved", /* 44 */ |
| "Peer STA does not support the requested cipher suite", /* 45 */ |
| "Association denied due to requesting STA not supporting HT " |
| "features", /* 46 */ |
| }; |
| #define NUM_REASONS (sizeof reason_text / sizeof reason_text[0]) |
| |
| static int |
| wep_print(const u_char *p) |
| { |
| u_int32_t iv; |
| |
| if (!TTEST2(*p, IEEE802_11_IV_LEN + IEEE802_11_KID_LEN)) |
| return 0; |
| iv = EXTRACT_LE_32BITS(p); |
| |
| printf("Data IV:%3x Pad %x KeyID %x", IV_IV(iv), IV_PAD(iv), |
| IV_KEYID(iv)); |
| |
| return 1; |
| } |
| |
| static int |
| parse_elements(struct mgmt_body_t *pbody, const u_char *p, int offset, |
| u_int length) |
| { |
| u_int elementlen; |
| struct ssid_t ssid; |
| struct challenge_t challenge; |
| struct rates_t rates; |
| struct ds_t ds; |
| struct cf_t cf; |
| struct tim_t tim; |
| |
| /* |
| * We haven't seen any elements yet. |
| */ |
| pbody->challenge_present = 0; |
| pbody->ssid_present = 0; |
| pbody->rates_present = 0; |
| pbody->ds_present = 0; |
| pbody->cf_present = 0; |
| pbody->tim_present = 0; |
| |
| while (length != 0) { |
| if (!TTEST2(*(p + offset), 1)) |
| return 0; |
| if (length < 1) |
| return 0; |
| switch (*(p + offset)) { |
| case E_SSID: |
| if (!TTEST2(*(p + offset), 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| memcpy(&ssid, p + offset, 2); |
| offset += 2; |
| length -= 2; |
| if (ssid.length != 0) { |
| if (ssid.length > sizeof(ssid.ssid) - 1) |
| return 0; |
| if (!TTEST2(*(p + offset), ssid.length)) |
| return 0; |
| if (length < ssid.length) |
| return 0; |
| memcpy(&ssid.ssid, p + offset, ssid.length); |
| offset += ssid.length; |
| length -= ssid.length; |
| } |
| ssid.ssid[ssid.length] = '\0'; |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen an SSID IE, |
| * copy this one, otherwise ignore this one, |
| * so we later report the first one we saw. |
| */ |
| if (!pbody->ssid_present) { |
| pbody->ssid = ssid; |
| pbody->ssid_present = 1; |
| } |
| break; |
| case E_CHALLENGE: |
| if (!TTEST2(*(p + offset), 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| memcpy(&challenge, p + offset, 2); |
| offset += 2; |
| length -= 2; |
| if (challenge.length != 0) { |
| if (challenge.length > |
| sizeof(challenge.text) - 1) |
| return 0; |
| if (!TTEST2(*(p + offset), challenge.length)) |
| return 0; |
| if (length < challenge.length) |
| return 0; |
| memcpy(&challenge.text, p + offset, |
| challenge.length); |
| offset += challenge.length; |
| length -= challenge.length; |
| } |
| challenge.text[challenge.length] = '\0'; |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen a challenge IE, |
| * copy this one, otherwise ignore this one, |
| * so we later report the first one we saw. |
| */ |
| if (!pbody->challenge_present) { |
| pbody->challenge = challenge; |
| pbody->challenge_present = 1; |
| } |
| break; |
| case E_RATES: |
| if (!TTEST2(*(p + offset), 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| memcpy(&rates, p + offset, 2); |
| offset += 2; |
| length -= 2; |
| if (rates.length != 0) { |
| if (rates.length > sizeof rates.rate) |
| return 0; |
| if (!TTEST2(*(p + offset), rates.length)) |
| return 0; |
| if (length < rates.length) |
| return 0; |
| memcpy(&rates.rate, p + offset, rates.length); |
| offset += rates.length; |
| length -= rates.length; |
| } |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen a rates IE, |
| * copy this one if it's not zero-length, |
| * otherwise ignore this one, so we later |
| * report the first one we saw. |
| * |
| * We ignore zero-length rates IEs as some |
| * devices seem to put a zero-length rates |
| * IE, followed by an SSID IE, followed by |
| * a non-zero-length rates IE into frames, |
| * even though IEEE Std 802.11-2007 doesn't |
| * seem to indicate that a zero-length rates |
| * IE is valid. |
| */ |
| if (!pbody->rates_present && rates.length != 0) { |
| pbody->rates = rates; |
| pbody->rates_present = 1; |
| } |
| break; |
| case E_DS: |
| if (!TTEST2(*(p + offset), 3)) |
| return 0; |
| if (length < 3) |
| return 0; |
| memcpy(&ds, p + offset, 3); |
| offset += 3; |
| length -= 3; |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen a DS IE, |
| * copy this one, otherwise ignore this one, |
| * so we later report the first one we saw. |
| */ |
| if (!pbody->ds_present) { |
| pbody->ds = ds; |
| pbody->ds_present = 1; |
| } |
| break; |
| case E_CF: |
| if (!TTEST2(*(p + offset), 8)) |
| return 0; |
| if (length < 8) |
| return 0; |
| memcpy(&cf, p + offset, 8); |
| offset += 8; |
| length -= 8; |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen a CF IE, |
| * copy this one, otherwise ignore this one, |
| * so we later report the first one we saw. |
| */ |
| if (!pbody->cf_present) { |
| pbody->cf = cf; |
| pbody->cf_present = 1; |
| } |
| break; |
| case E_TIM: |
| if (!TTEST2(*(p + offset), 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| memcpy(&tim, p + offset, 2); |
| offset += 2; |
| length -= 2; |
| if (!TTEST2(*(p + offset), 3)) |
| return 0; |
| if (length < 3) |
| return 0; |
| memcpy(&tim.count, p + offset, 3); |
| offset += 3; |
| length -= 3; |
| |
| if (tim.length <= 3) |
| break; |
| if (tim.length - 3 > (int)sizeof tim.bitmap) |
| return 0; |
| if (!TTEST2(*(p + offset), tim.length - 3)) |
| return 0; |
| if (length < (u_int)(tim.length - 3)) |
| return 0; |
| memcpy(tim.bitmap, p + (tim.length - 3), |
| (tim.length - 3)); |
| offset += tim.length - 3; |
| length -= tim.length - 3; |
| /* |
| * Present and not truncated. |
| * |
| * If we haven't already seen a TIM IE, |
| * copy this one, otherwise ignore this one, |
| * so we later report the first one we saw. |
| */ |
| if (!pbody->tim_present) { |
| pbody->tim = tim; |
| pbody->tim_present = 1; |
| } |
| break; |
| default: |
| #if 0 |
| printf("(1) unhandled element_id (%d) ", |
| *(p + offset)); |
| #endif |
| if (!TTEST2(*(p + offset), 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| elementlen = *(p + offset + 1); |
| if (!TTEST2(*(p + offset + 2), elementlen)) |
| return 0; |
| if (length < elementlen + 2) |
| return 0; |
| offset += elementlen + 2; |
| length -= elementlen + 2; |
| break; |
| } |
| } |
| |
| /* No problems found. */ |
| return 1; |
| } |
| |
| /********************************************************************************* |
| * Print Handle functions for the management frame types |
| *********************************************************************************/ |
| |
| static int |
| handle_beacon(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + |
| IEEE802_11_CAPINFO_LEN)) |
| return 0; |
| if (length < IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + |
| IEEE802_11_CAPINFO_LEN) |
| return 0; |
| memcpy(&pbody.timestamp, p, IEEE802_11_TSTAMP_LEN); |
| offset += IEEE802_11_TSTAMP_LEN; |
| length -= IEEE802_11_TSTAMP_LEN; |
| pbody.beacon_interval = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_BCNINT_LEN; |
| length -= IEEE802_11_BCNINT_LEN; |
| pbody.capability_info = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_CAPINFO_LEN; |
| length -= IEEE802_11_CAPINFO_LEN; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| PRINT_SSID(pbody); |
| PRINT_RATES(pbody); |
| printf(" %s", |
| CAPABILITY_ESS(pbody.capability_info) ? "ESS" : "IBSS"); |
| PRINT_DS_CHANNEL(pbody); |
| |
| return ret; |
| } |
| |
| static int |
| handle_assoc_request(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN)) |
| return 0; |
| if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN) |
| return 0; |
| pbody.capability_info = EXTRACT_LE_16BITS(p); |
| offset += IEEE802_11_CAPINFO_LEN; |
| length -= IEEE802_11_CAPINFO_LEN; |
| pbody.listen_interval = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_LISTENINT_LEN; |
| length -= IEEE802_11_LISTENINT_LEN; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| PRINT_SSID(pbody); |
| PRINT_RATES(pbody); |
| return ret; |
| } |
| |
| static int |
| handle_assoc_response(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_CAPINFO_LEN + IEEE802_11_STATUS_LEN + |
| IEEE802_11_AID_LEN)) |
| return 0; |
| if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_STATUS_LEN + |
| IEEE802_11_AID_LEN) |
| return 0; |
| pbody.capability_info = EXTRACT_LE_16BITS(p); |
| offset += IEEE802_11_CAPINFO_LEN; |
| length -= IEEE802_11_CAPINFO_LEN; |
| pbody.status_code = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_STATUS_LEN; |
| length -= IEEE802_11_STATUS_LEN; |
| pbody.aid = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_AID_LEN; |
| length -= IEEE802_11_AID_LEN; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| printf(" AID(%x) :%s: %s", ((u_int16_t)(pbody.aid << 2 )) >> 2 , |
| CAPABILITY_PRIVACY(pbody.capability_info) ? " PRIVACY " : "", |
| (pbody.status_code < NUM_STATUSES |
| ? status_text[pbody.status_code] |
| : "n/a")); |
| |
| return ret; |
| } |
| |
| static int |
| handle_reassoc_request(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN + |
| IEEE802_11_AP_LEN)) |
| return 0; |
| if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN + |
| IEEE802_11_AP_LEN) |
| return 0; |
| pbody.capability_info = EXTRACT_LE_16BITS(p); |
| offset += IEEE802_11_CAPINFO_LEN; |
| length -= IEEE802_11_CAPINFO_LEN; |
| pbody.listen_interval = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_LISTENINT_LEN; |
| length -= IEEE802_11_LISTENINT_LEN; |
| memcpy(&pbody.ap, p+offset, IEEE802_11_AP_LEN); |
| offset += IEEE802_11_AP_LEN; |
| length -= IEEE802_11_AP_LEN; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| PRINT_SSID(pbody); |
| printf(" AP : %s", etheraddr_string( pbody.ap )); |
| |
| return ret; |
| } |
| |
| static int |
| handle_reassoc_response(const u_char *p, u_int length) |
| { |
| /* Same as a Association Reponse */ |
| return handle_assoc_response(p, length); |
| } |
| |
| static int |
| handle_probe_request(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| PRINT_SSID(pbody); |
| PRINT_RATES(pbody); |
| |
| return ret; |
| } |
| |
| static int |
| handle_probe_response(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + |
| IEEE802_11_CAPINFO_LEN)) |
| return 0; |
| if (length < IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + |
| IEEE802_11_CAPINFO_LEN) |
| return 0; |
| memcpy(&pbody.timestamp, p, IEEE802_11_TSTAMP_LEN); |
| offset += IEEE802_11_TSTAMP_LEN; |
| length -= IEEE802_11_TSTAMP_LEN; |
| pbody.beacon_interval = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_BCNINT_LEN; |
| length -= IEEE802_11_BCNINT_LEN; |
| pbody.capability_info = EXTRACT_LE_16BITS(p+offset); |
| offset += IEEE802_11_CAPINFO_LEN; |
| length -= IEEE802_11_CAPINFO_LEN; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| PRINT_SSID(pbody); |
| PRINT_RATES(pbody); |
| PRINT_DS_CHANNEL(pbody); |
| |
| return ret; |
| } |
| |
| static int |
| handle_atim(void) |
| { |
| /* the frame body for ATIM is null. */ |
| return 1; |
| } |
| |
| static int |
| handle_disassoc(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_REASON_LEN)) |
| return 0; |
| if (length < IEEE802_11_REASON_LEN) |
| return 0; |
| pbody.reason_code = EXTRACT_LE_16BITS(p); |
| |
| printf(": %s", |
| (pbody.reason_code < NUM_REASONS) |
| ? reason_text[pbody.reason_code] |
| : "Reserved" ); |
| |
| return 1; |
| } |
| |
| static int |
| handle_auth(const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| int ret; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, 6)) |
| return 0; |
| if (length < 6) |
| return 0; |
| pbody.auth_alg = EXTRACT_LE_16BITS(p); |
| offset += 2; |
| length -= 2; |
| pbody.auth_trans_seq_num = EXTRACT_LE_16BITS(p + offset); |
| offset += 2; |
| length -= 2; |
| pbody.status_code = EXTRACT_LE_16BITS(p + offset); |
| offset += 2; |
| length -= 2; |
| |
| ret = parse_elements(&pbody, p, offset, length); |
| |
| if ((pbody.auth_alg == 1) && |
| ((pbody.auth_trans_seq_num == 2) || |
| (pbody.auth_trans_seq_num == 3))) { |
| printf(" (%s)-%x [Challenge Text] %s", |
| (pbody.auth_alg < NUM_AUTH_ALGS) |
| ? auth_alg_text[pbody.auth_alg] |
| : "Reserved", |
| pbody.auth_trans_seq_num, |
| ((pbody.auth_trans_seq_num % 2) |
| ? ((pbody.status_code < NUM_STATUSES) |
| ? status_text[pbody.status_code] |
| : "n/a") : "")); |
| return ret; |
| } |
| printf(" (%s)-%x: %s", |
| (pbody.auth_alg < NUM_AUTH_ALGS) |
| ? auth_alg_text[pbody.auth_alg] |
| : "Reserved", |
| pbody.auth_trans_seq_num, |
| (pbody.auth_trans_seq_num % 2) |
| ? ((pbody.status_code < NUM_STATUSES) |
| ? status_text[pbody.status_code] |
| : "n/a") |
| : ""); |
| |
| return ret; |
| } |
| |
| static int |
| handle_deauth(const struct mgmt_header_t *pmh, const u_char *p, u_int length) |
| { |
| struct mgmt_body_t pbody; |
| int offset = 0; |
| const char *reason = NULL; |
| |
| memset(&pbody, 0, sizeof(pbody)); |
| |
| if (!TTEST2(*p, IEEE802_11_REASON_LEN)) |
| return 0; |
| if (length < IEEE802_11_REASON_LEN) |
| return 0; |
| pbody.reason_code = EXTRACT_LE_16BITS(p); |
| offset += IEEE802_11_REASON_LEN; |
| length -= IEEE802_11_REASON_LEN; |
| |
| reason = (pbody.reason_code < NUM_REASONS) |
| ? reason_text[pbody.reason_code] |
| : "Reserved"; |
| |
| if (eflag) { |
| printf(": %s", reason); |
| } else { |
| printf(" (%s): %s", etheraddr_string(pmh->sa), reason); |
| } |
| return 1; |
| } |
| |
| #define PRINT_HT_ACTION(v) (\ |
| (v) == 0 ? printf("TxChWidth") : \ |
| (v) == 1 ? printf("MIMOPwrSave") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_BA_ACTION(v) (\ |
| (v) == 0 ? printf("ADDBA Request") : \ |
| (v) == 1 ? printf("ADDBA Response") : \ |
| (v) == 2 ? printf("DELBA") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_MESHLINK_ACTION(v) (\ |
| (v) == 0 ? printf("Request") : \ |
| (v) == 1 ? printf("Report") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_MESHPEERING_ACTION(v) (\ |
| (v) == 0 ? printf("Open") : \ |
| (v) == 1 ? printf("Confirm") : \ |
| (v) == 2 ? printf("Close") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_MESHPATH_ACTION(v) (\ |
| (v) == 0 ? printf("Request") : \ |
| (v) == 1 ? printf("Report") : \ |
| (v) == 2 ? printf("Error") : \ |
| (v) == 3 ? printf("RootAnnouncement") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| |
| #define PRINT_MESH_ACTION(v) (\ |
| (v) == 0 ? printf("MeshLink") : \ |
| (v) == 1 ? printf("HWMP") : \ |
| (v) == 2 ? printf("Gate Announcement") : \ |
| (v) == 3 ? printf("Congestion Control") : \ |
| (v) == 4 ? printf("MCCA Setup Request") : \ |
| (v) == 5 ? printf("MCCA Setup Reply") : \ |
| (v) == 6 ? printf("MCCA Advertisement Request") : \ |
| (v) == 7 ? printf("MCCA Advertisement") : \ |
| (v) == 8 ? printf("MCCA Teardown") : \ |
| (v) == 9 ? printf("TBTT Adjustment Request") : \ |
| (v) == 10 ? printf("TBTT Adjustment Response") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_MULTIHOP_ACTION(v) (\ |
| (v) == 0 ? printf("Proxy Update") : \ |
| (v) == 1 ? printf("Proxy Update Confirmation") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| #define PRINT_SELFPROT_ACTION(v) (\ |
| (v) == 1 ? printf("Peering Open") : \ |
| (v) == 2 ? printf("Peering Confirm") : \ |
| (v) == 3 ? printf("Peering Close") : \ |
| (v) == 4 ? printf("Group Key Inform") : \ |
| (v) == 5 ? printf("Group Key Acknowledge") : \ |
| printf("Act#%d", (v)) \ |
| ) |
| |
| static int |
| handle_action(const struct mgmt_header_t *pmh, const u_char *p, u_int length) |
| { |
| if (!TTEST2(*p, 2)) |
| return 0; |
| if (length < 2) |
| return 0; |
| if (eflag) { |
| printf(": "); |
| } else { |
| printf(" (%s): ", etheraddr_string(pmh->sa)); |
| } |
| switch (p[0]) { |
| case 0: printf("Spectrum Management Act#%d", p[1]); break; |
| case 1: printf("QoS Act#%d", p[1]); break; |
| case 2: printf("DLS Act#%d", p[1]); break; |
| case 3: printf("BA "); PRINT_BA_ACTION(p[1]); break; |
| case 7: printf("HT "); PRINT_HT_ACTION(p[1]); break; |
| case 13: printf("MeshAction "); PRINT_MESH_ACTION(p[1]); break; |
| case 14: |
| printf("MultiohopAction "); |
| PRINT_MULTIHOP_ACTION(p[1]); break; |
| case 15: |
| printf("SelfprotectAction "); |
| PRINT_SELFPROT_ACTION(p[1]); break; |
| case 127: printf("Vendor Act#%d", p[1]); break; |
| default: |
| printf("Reserved(%d) Act#%d", p[0], p[1]); |
| break; |
| } |
| return 1; |
| } |
| |
| |
| /********************************************************************************* |
| * Print Body funcs |
| *********************************************************************************/ |
| |
| |
| static int |
| mgmt_body_print(u_int16_t fc, const struct mgmt_header_t *pmh, |
| const u_char *p, u_int length) |
| { |
| switch (FC_SUBTYPE(fc)) { |
| case ST_ASSOC_REQUEST: |
| printf("Assoc Request"); |
| return handle_assoc_request(p, length); |
| case ST_ASSOC_RESPONSE: |
| printf("Assoc Response"); |
| return handle_assoc_response(p, length); |
| case ST_REASSOC_REQUEST: |
| printf("ReAssoc Request"); |
| return handle_reassoc_request(p, length); |
| case ST_REASSOC_RESPONSE: |
| printf("ReAssoc Response"); |
| return handle_reassoc_response(p, length); |
| case ST_PROBE_REQUEST: |
| printf("Probe Request"); |
| return handle_probe_request(p, length); |
| case ST_PROBE_RESPONSE: |
| printf("Probe Response"); |
| return handle_probe_response(p, length); |
| case ST_BEACON: |
| printf("Beacon"); |
| return handle_beacon(p, length); |
| case ST_ATIM: |
| printf("ATIM"); |
| return handle_atim(); |
| case ST_DISASSOC: |
| printf("Disassociation"); |
| return handle_disassoc(p, length); |
| case ST_AUTH: |
| printf("Authentication"); |
| if (!TTEST2(*p, 3)) |
| return 0; |
| if ((p[0] == 0 ) && (p[1] == 0) && (p[2] == 0)) { |
| printf("Authentication (Shared-Key)-3 "); |
| return wep_print(p); |
| } |
| return handle_auth(p, length); |
| case ST_DEAUTH: |
| printf("DeAuthentication"); |
| return handle_deauth(pmh, p, length); |
| break; |
| case ST_ACTION: |
| printf("Action"); |
| return handle_action(pmh, p, length); |
| break; |
| default: |
| printf("Unhandled Management subtype(%x)", |
| FC_SUBTYPE(fc)); |
| return 1; |
| } |
| } |
| |
| |
| /********************************************************************************* |
| * Handles printing all the control frame types |
| *********************************************************************************/ |
| |
| static int |
| ctrl_body_print(u_int16_t fc, const u_char *p) |
| { |
| switch (FC_SUBTYPE(fc)) { |
| case CTRL_CONTROL_WRAPPER: |
| printf("Control Wrapper"); |
| /* XXX - requires special handling */ |
| break; |
| case CTRL_BAR: |
| printf("BAR"); |
| if (!TTEST2(*p, CTRL_BAR_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s TA:%s CTL(%x) SEQ(%u) ", |
| etheraddr_string(((const struct ctrl_bar_t *)p)->ra), |
| etheraddr_string(((const struct ctrl_bar_t *)p)->ta), |
| EXTRACT_LE_16BITS(&(((const struct ctrl_bar_t *)p)->ctl)), |
| EXTRACT_LE_16BITS(&(((const struct ctrl_bar_t *)p)->seq))); |
| break; |
| case CTRL_BA: |
| printf("BA"); |
| if (!TTEST2(*p, CTRL_BA_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s ", |
| etheraddr_string(((const struct ctrl_ba_t *)p)->ra)); |
| break; |
| case CTRL_PS_POLL: |
| printf("Power Save-Poll"); |
| if (!TTEST2(*p, CTRL_PS_POLL_HDRLEN)) |
| return 0; |
| printf(" AID(%x)", |
| EXTRACT_LE_16BITS(&(((const struct ctrl_ps_poll_t *)p)->aid))); |
| break; |
| case CTRL_RTS: |
| printf("Request-To-Send"); |
| if (!TTEST2(*p, CTRL_RTS_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" TA:%s ", |
| etheraddr_string(((const struct ctrl_rts_t *)p)->ta)); |
| break; |
| case CTRL_CTS: |
| printf("Clear-To-Send"); |
| if (!TTEST2(*p, CTRL_CTS_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s ", |
| etheraddr_string(((const struct ctrl_cts_t *)p)->ra)); |
| break; |
| case CTRL_ACK: |
| printf("Acknowledgment"); |
| if (!TTEST2(*p, CTRL_ACK_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s ", |
| etheraddr_string(((const struct ctrl_ack_t *)p)->ra)); |
| break; |
| case CTRL_CF_END: |
| printf("CF-End"); |
| if (!TTEST2(*p, CTRL_END_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s ", |
| etheraddr_string(((const struct ctrl_end_t *)p)->ra)); |
| break; |
| case CTRL_END_ACK: |
| printf("CF-End+CF-Ack"); |
| if (!TTEST2(*p, CTRL_END_ACK_HDRLEN)) |
| return 0; |
| if (!eflag) |
| printf(" RA:%s ", |
| etheraddr_string(((const struct ctrl_end_ack_t *)p)->ra)); |
| break; |
| default: |
| printf("Unknown Ctrl Subtype"); |
| } |
| return 1; |
| } |
| |
| /* |
| * Print Header funcs |
| */ |
| |
| /* |
| * Data Frame - Address field contents |
| * |
| * To Ds | From DS | Addr 1 | Addr 2 | Addr 3 | Addr 4 |
| * 0 | 0 | DA | SA | BSSID | n/a |
| * 0 | 1 | DA | BSSID | SA | n/a |
| * 1 | 0 | BSSID | SA | DA | n/a |
| * 1 | 1 | RA | TA | DA | SA |
| */ |
| |
| static void |
| data_header_print(u_int16_t fc, const u_char *p, const u_int8_t **srcp, |
| const u_int8_t **dstp) |
| { |
| u_int subtype = FC_SUBTYPE(fc); |
| |
| if (DATA_FRAME_IS_CF_ACK(subtype) || DATA_FRAME_IS_CF_POLL(subtype) || |
| DATA_FRAME_IS_QOS(subtype)) { |
| printf("CF "); |
| if (DATA_FRAME_IS_CF_ACK(subtype)) { |
| if (DATA_FRAME_IS_CF_POLL(subtype)) |
| printf("Ack/Poll"); |
| else |
| printf("Ack"); |
| } else { |
| if (DATA_FRAME_IS_CF_POLL(subtype)) |
| printf("Poll"); |
| } |
| if (DATA_FRAME_IS_QOS(subtype)) |
| printf("+QoS"); |
| printf(" "); |
| } |
| |
| #define ADDR1 (p + 4) |
| #define ADDR2 (p + 10) |
| #define ADDR3 (p + 16) |
| #define ADDR4 (p + 24) |
| |
| if (!FC_TO_DS(fc) && !FC_FROM_DS(fc)) { |
| if (srcp != NULL) |
| *srcp = ADDR2; |
| if (dstp != NULL) |
| *dstp = ADDR1; |
| if (!eflag) |
| return; |
| printf("DA:%s SA:%s BSSID:%s ", |
| etheraddr_string(ADDR1), etheraddr_string(ADDR2), |
| etheraddr_string(ADDR3)); |
| } else if (!FC_TO_DS(fc) && FC_FROM_DS(fc)) { |
| if (srcp != NULL) |
| *srcp = ADDR3; |
| if (dstp != NULL) |
| *dstp = ADDR1; |
| if (!eflag) |
| return; |
| printf("DA:%s BSSID:%s SA:%s ", |
| etheraddr_string(ADDR1), etheraddr_string(ADDR2), |
| etheraddr_string(ADDR3)); |
| } else if (FC_TO_DS(fc) && !FC_FROM_DS(fc)) { |
| if (srcp != NULL) |
| *srcp = ADDR2; |
| if (dstp != NULL) |
| *dstp = ADDR3; |
| if (!eflag) |
| return; |
| printf("BSSID:%s SA:%s DA:%s ", |
| etheraddr_string(ADDR1), etheraddr_string(ADDR2), |
| etheraddr_string(ADDR3)); |
| } else if (FC_TO_DS(fc) && FC_FROM_DS(fc)) { |
| if (srcp != NULL) |
| *srcp = ADDR4; |
| if (dstp != NULL) |
| *dstp = ADDR3; |
| if (!eflag) |
| return; |
| printf("RA:%s TA:%s DA:%s SA:%s ", |
| etheraddr_string(ADDR1), etheraddr_string(ADDR2), |
| etheraddr_string(ADDR3), etheraddr_string(ADDR4)); |
| } |
| |
| #undef ADDR1 |
| #undef ADDR2 |
| #undef ADDR3 |
| #undef ADDR4 |
| } |
| |
| static void |
| mgmt_header_print(const u_char *p, const u_int8_t **srcp, |
| const u_int8_t **dstp) |
| { |
| const struct mgmt_header_t *hp = (const struct mgmt_header_t *) p; |
| |
| if (srcp != NULL) |
| *srcp = hp->sa; |
| if (dstp != NULL) |
| *dstp = hp->da; |
| if (!eflag) |
| return; |
| |
| printf("BSSID:%s DA:%s SA:%s ", |
| etheraddr_string((hp)->bssid), etheraddr_string((hp)->da), |
| etheraddr_string((hp)->sa)); |
| } |
| |
| static void |
| ctrl_header_print(u_int16_t fc, const u_char *p, const u_int8_t **srcp, |
| const u_int8_t **dstp) |
| { |
| if (srcp != NULL) |
| *srcp = NULL; |
| if (dstp != NULL) |
| *dstp = NULL; |
| if (!eflag) |
| return; |
| |
| switch (FC_SUBTYPE(fc)) { |
| case CTRL_BAR: |
| printf(" RA:%s TA:%s CTL(%x) SEQ(%u) ", |
| etheraddr_string(((const struct ctrl_bar_t *)p)->ra), |
| etheraddr_string(((const struct ctrl_bar_t *)p)->ta), |
| EXTRACT_LE_16BITS(&(((const struct ctrl_bar_t *)p)->ctl)), |
| EXTRACT_LE_16BITS(&(((const struct ctrl_bar_t *)p)->seq))); |
| break; |
| case CTRL_BA: |
| printf("RA:%s ", |
| etheraddr_string(((const struct ctrl_ba_t *)p)->ra)); |
| break; |
| case CTRL_PS_POLL: |
| printf("BSSID:%s TA:%s ", |
| etheraddr_string(((const struct ctrl_ps_poll_t *)p)->bssid), |
| etheraddr_string(((const struct ctrl_ps_poll_t *)p)->ta)); |
| break; |
| case CTRL_RTS: |
| printf("RA:%s TA:%s ", |
| etheraddr_string(((const struct ctrl_rts_t *)p)->ra), |
| etheraddr_string(((const struct ctrl_rts_t *)p)->ta)); |
| break; |
| case CTRL_CTS: |
| printf("RA:%s ", |
| etheraddr_string(((const struct ctrl_cts_t *)p)->ra)); |
| break; |
| case CTRL_ACK: |
| printf("RA:%s ", |
| etheraddr_string(((const struct ctrl_ack_t *)p)->ra)); |
| break; |
| case CTRL_CF_END: |
| printf("RA:%s BSSID:%s ", |
| etheraddr_string(((const struct ctrl_end_t *)p)->ra), |
| etheraddr_string(((const struct ctrl_end_t *)p)->bssid)); |
| break; |
| case CTRL_END_ACK: |
| printf("RA:%s BSSID:%s ", |
| etheraddr_string(((const struct ctrl_end_ack_t *)p)->ra), |
| etheraddr_string(((const struct ctrl_end_ack_t *)p)->bssid)); |
| break; |
| default: |
| printf("(H) Unknown Ctrl Subtype"); |
| break; |
| } |
| } |
| |
| static int |
| extract_header_length(u_int16_t fc) |
| { |
| int len; |
| |
| switch (FC_TYPE(fc)) { |
| case T_MGMT: |
| return MGMT_HDRLEN; |
| case T_CTRL: |
| switch (FC_SUBTYPE(fc)) { |
| case CTRL_BAR: |
| return CTRL_BAR_HDRLEN; |
| case CTRL_PS_POLL: |
| return CTRL_PS_POLL_HDRLEN; |
| case CTRL_RTS: |
| return CTRL_RTS_HDRLEN; |
| case CTRL_CTS: |
| return CTRL_CTS_HDRLEN; |
| case CTRL_ACK: |
| return CTRL_ACK_HDRLEN; |
| case CTRL_CF_END: |
| return CTRL_END_HDRLEN; |
| case CTRL_END_ACK: |
| return CTRL_END_ACK_HDRLEN; |
| default: |
| return 0; |
| } |
| case T_DATA: |
| len = (FC_TO_DS(fc) && FC_FROM_DS(fc)) ? 30 : 24; |
| if (DATA_FRAME_IS_QOS(FC_SUBTYPE(fc))) |
| len += 2; |
| return len; |
| default: |
| printf("unknown IEEE802.11 frame type (%d)", FC_TYPE(fc)); |
| return 0; |
| } |
| } |
| |
| static int |
| extract_mesh_header_length(const u_char *p) |
| { |
| return (p[0] &~ 3) ? 0 : 6*(1 + (p[0] & 3)); |
| } |
| |
| /* |
| * Print the 802.11 MAC header if eflag is set, and set "*srcp" and "*dstp" |
| * to point to the source and destination MAC addresses in any case if |
| * "srcp" and "dstp" aren't null. |
| */ |
| static void |
| ieee_802_11_hdr_print(u_int16_t fc, const u_char *p, u_int hdrlen, |
| u_int meshdrlen, const u_int8_t **srcp, const u_int8_t **dstp) |
| { |
| if (vflag) { |
| if (FC_MORE_DATA(fc)) |
| printf("More Data "); |
| if (FC_MORE_FLAG(fc)) |
| printf("More Fragments "); |
| if (FC_POWER_MGMT(fc)) |
| printf("Pwr Mgmt "); |
| if (FC_RETRY(fc)) |
| printf("Retry "); |
| if (FC_ORDER(fc)) |
| printf("Strictly Ordered "); |
| if (FC_WEP(fc)) |
| printf("WEP Encrypted "); |
| if (FC_TYPE(fc) != T_CTRL || FC_SUBTYPE(fc) != CTRL_PS_POLL) |
| printf("%dus ", |
| EXTRACT_LE_16BITS( |
| &((const struct mgmt_header_t *)p)->duration)); |
| } |
| if (meshdrlen != 0) { |
| const struct meshcntl_t *mc = |
| (const struct meshcntl_t *)&p[hdrlen - meshdrlen]; |
| int ae = mc->flags & 3; |
| |
| printf("MeshData (AE %d TTL %u seq %u", ae, mc->ttl, |
| EXTRACT_LE_32BITS(mc->seq)); |
| if (ae > 0) |
| printf(" A4:%s", etheraddr_string(mc->addr4)); |
| if (ae > 1) |
| printf(" A5:%s", etheraddr_string(mc->addr5)); |
| if (ae > 2) |
| printf(" A6:%s", etheraddr_string(mc->addr6)); |
| printf(") "); |
| } |
| |
| switch (FC_TYPE(fc)) { |
| case T_MGMT: |
| mgmt_header_print(p, srcp, dstp); |
| break; |
| case T_CTRL: |
| ctrl_header_print(fc, p, srcp, dstp); |
| break; |
| case T_DATA: |
| data_header_print(fc, p, srcp, dstp); |
| break; |
| default: |
| printf("(header) unknown IEEE802.11 frame type (%d)", |
| FC_TYPE(fc)); |
| *srcp = NULL; |
| *dstp = NULL; |
| break; |
| } |
| } |
| |
| #ifndef roundup2 |
| #define roundup2(x, y) (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */ |
| #endif |
| |
| static u_int |
| ieee802_11_print(const u_char *p, u_int length, u_int orig_caplen, int pad, |
| u_int fcslen) |
| { |
| u_int16_t fc; |
| u_int caplen, hdrlen, meshdrlen; |
| const u_int8_t *src, *dst; |
| u_short extracted_ethertype; |
| |
| caplen = orig_caplen; |
| /* Remove FCS, if present */ |
| if (length < fcslen) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| length -= fcslen; |
| if (caplen > length) { |
| /* Amount of FCS in actual packet data, if any */ |
| fcslen = caplen - length; |
| caplen -= fcslen; |
| snapend -= fcslen; |
| } |
| |
| if (caplen < IEEE802_11_FC_LEN) { |
| printf("[|802.11]"); |
| return orig_caplen; |
| } |
| |
| fc = EXTRACT_LE_16BITS(p); |
| hdrlen = extract_header_length(fc); |
| if (pad) |
| hdrlen = roundup2(hdrlen, 4); |
| if (Hflag && FC_TYPE(fc) == T_DATA && |
| DATA_FRAME_IS_QOS(FC_SUBTYPE(fc))) { |
| meshdrlen = extract_mesh_header_length(p+hdrlen); |
| hdrlen += meshdrlen; |
| } else |
| meshdrlen = 0; |
| |
| |
| if (caplen < hdrlen) { |
| printf("[|802.11]"); |
| return hdrlen; |
| } |
| |
| ieee_802_11_hdr_print(fc, p, hdrlen, meshdrlen, &src, &dst); |
| |
| /* |
| * Go past the 802.11 header. |
| */ |
| length -= hdrlen; |
| caplen -= hdrlen; |
| p += hdrlen; |
| |
| switch (FC_TYPE(fc)) { |
| case T_MGMT: |
| if (!mgmt_body_print(fc, |
| (const struct mgmt_header_t *)(p - hdrlen), p, length)) { |
| printf("[|802.11]"); |
| return hdrlen; |
| } |
| break; |
| case T_CTRL: |
| if (!ctrl_body_print(fc, p - hdrlen)) { |
| printf("[|802.11]"); |
| return hdrlen; |
| } |
| break; |
| case T_DATA: |
| if (DATA_FRAME_IS_NULL(FC_SUBTYPE(fc))) |
| return hdrlen; /* no-data frame */ |
| /* There may be a problem w/ AP not having this bit set */ |
| if (FC_WEP(fc)) { |
| if (!wep_print(p)) { |
| printf("[|802.11]"); |
| return hdrlen; |
| } |
| } else if (llc_print(p, length, caplen, dst, src, |
| &extracted_ethertype) == 0) { |
| /* |
| * Some kinds of LLC packet we cannot |
| * handle intelligently |
| */ |
| if (!eflag) |
| ieee_802_11_hdr_print(fc, p - hdrlen, hdrlen, |
| meshdrlen, NULL, NULL); |
| if (extracted_ethertype) |
| printf("(LLC %s) ", |
| etherproto_string( |
| htons(extracted_ethertype))); |
| if (!suppress_default_print) |
| default_print(p, caplen); |
| } |
| break; |
| default: |
| printf("unknown 802.11 frame type (%d)", FC_TYPE(fc)); |
| break; |
| } |
| |
| return hdrlen; |
| } |
| |
| /* |
| * This is the top level routine of the printer. 'p' points |
| * to the 802.11 header of the packet, 'h->ts' is the timestamp, |
| * 'h->len' is the length of the packet off the wire, and 'h->caplen' |
| * is the number of bytes actually captured. |
| */ |
| u_int |
| ieee802_11_if_print(const struct pcap_pkthdr *h, const u_char *p) |
| { |
| return ieee802_11_print(p, h->len, h->caplen, 0, 0); |
| } |
| |
| #define IEEE80211_CHAN_FHSS \ |
| (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) |
| #define IEEE80211_CHAN_A \ |
| (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) |
| #define IEEE80211_CHAN_B \ |
| (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) |
| #define IEEE80211_CHAN_PUREG \ |
| (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) |
| #define IEEE80211_CHAN_G \ |
| (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) |
| |
| #define IS_CHAN_FHSS(flags) \ |
| ((flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) |
| #define IS_CHAN_A(flags) \ |
| ((flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) |
| #define IS_CHAN_B(flags) \ |
| ((flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) |
| #define IS_CHAN_PUREG(flags) \ |
| ((flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) |
| #define IS_CHAN_G(flags) \ |
| ((flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) |
| #define IS_CHAN_ANYG(flags) \ |
| (IS_CHAN_PUREG(flags) || IS_CHAN_G(flags)) |
| |
| static void |
| print_chaninfo(int freq, int flags) |
| { |
| printf("%u MHz", freq); |
| if (IS_CHAN_FHSS(flags)) |
| printf(" FHSS"); |
| if (IS_CHAN_A(flags)) { |
| if (flags & IEEE80211_CHAN_HALF) |
| printf(" 11a/10Mhz"); |
| else if (flags & IEEE80211_CHAN_QUARTER) |
| printf(" 11a/5Mhz"); |
| else |
| printf(" 11a"); |
| } |
| if (IS_CHAN_ANYG(flags)) { |
| if (flags & IEEE80211_CHAN_HALF) |
| printf(" 11g/10Mhz"); |
| else if (flags & IEEE80211_CHAN_QUARTER) |
| printf(" 11g/5Mhz"); |
| else |
| printf(" 11g"); |
| } else if (IS_CHAN_B(flags)) |
| printf(" 11b"); |
| if (flags & IEEE80211_CHAN_TURBO) |
| printf(" Turbo"); |
| if (flags & IEEE80211_CHAN_HT20) |
| printf(" ht/20"); |
| else if (flags & IEEE80211_CHAN_HT40D) |
| printf(" ht/40-"); |
| else if (flags & IEEE80211_CHAN_HT40U) |
| printf(" ht/40+"); |
| printf(" "); |
| } |
| |
| static int |
| print_radiotap_field(struct cpack_state *s, u_int32_t bit, u_int8_t *flags, |
| struct radiotap_state *state, u_int32_t presentflags) |
| { |
| union { |
| int8_t i8; |
| u_int8_t u8; |
| int16_t i16; |
| u_int16_t u16; |
| u_int32_t u32; |
| u_int64_t u64; |
| } u, u2, u3, u4; |
| int rc; |
| |
| switch (bit) { |
| case IEEE80211_RADIOTAP_FLAGS: |
| rc = cpack_uint8(s, &u.u8); |
| if (rc != 0) |
| break; |
| *flags = u.u8; |
| break; |
| case IEEE80211_RADIOTAP_RATE: |
| rc = cpack_uint8(s, &u.u8); |
| if (rc != 0) |
| break; |
| |
| /* Save state rate */ |
| state->rate = u.u8; |
| break; |
| case IEEE80211_RADIOTAP_DB_ANTSIGNAL: |
| case IEEE80211_RADIOTAP_DB_ANTNOISE: |
| case IEEE80211_RADIOTAP_ANTENNA: |
| rc = cpack_uint8(s, &u.u8); |
| break; |
| case IEEE80211_RADIOTAP_DBM_ANTSIGNAL: |
| case IEEE80211_RADIOTAP_DBM_ANTNOISE: |
| rc = cpack_int8(s, &u.i8); |
| break; |
| case IEEE80211_RADIOTAP_CHANNEL: |
| rc = cpack_uint16(s, &u.u16); |
| if (rc != 0) |
| break; |
| rc = cpack_uint16(s, &u2.u16); |
| break; |
| case IEEE80211_RADIOTAP_FHSS: |
| case IEEE80211_RADIOTAP_LOCK_QUALITY: |
| case IEEE80211_RADIOTAP_TX_ATTENUATION: |
| case IEEE80211_RADIOTAP_RX_FLAGS: |
| rc = cpack_uint16(s, &u.u16); |
| break; |
| case IEEE80211_RADIOTAP_DB_TX_ATTENUATION: |
| rc = cpack_uint8(s, &u.u8); |
| break; |
| case IEEE80211_RADIOTAP_DBM_TX_POWER: |
| rc = cpack_int8(s, &u.i8); |
| break; |
| case IEEE80211_RADIOTAP_TSFT: |
| rc = cpack_uint64(s, &u.u64); |
| break; |
| case IEEE80211_RADIOTAP_XCHANNEL: |
| rc = cpack_uint32(s, &u.u32); |
| if (rc != 0) |
| break; |
| rc = cpack_uint16(s, &u2.u16); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &u3.u8); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &u4.u8); |
| break; |
| case IEEE80211_RADIOTAP_MCS: |
| rc = cpack_uint8(s, &u.u8); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &u2.u8); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &u3.u8); |
| break; |
| case IEEE80211_RADIOTAP_VENDOR_NAMESPACE: { |
| u_int8_t vns[3]; |
| u_int16_t length; |
| u_int8_t subspace; |
| |
| if ((cpack_align_and_reserve(s, 2)) == NULL) { |
| rc = -1; |
| break; |
| } |
| |
| rc = cpack_uint8(s, &vns[0]); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &vns[1]); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &vns[2]); |
| if (rc != 0) |
| break; |
| rc = cpack_uint8(s, &subspace); |
| if (rc != 0) |
| break; |
| rc = cpack_uint16(s, &length); |
| if (rc != 0) |
| break; |
| |
| /* Skip up to length */ |
| s->c_next += length; |
| break; |
| } |
| default: |
| /* this bit indicates a field whose |
| * size we do not know, so we cannot |
| * proceed. Just print the bit number. |
| */ |
| printf("[bit %u] ", bit); |
| return -1; |
| } |
| |
| if (rc != 0) { |
| printf("[|802.11]"); |
| return rc; |
| } |
| |
| /* Preserve the state present flags */ |
| state->present = presentflags; |
| |
| switch (bit) { |
| case IEEE80211_RADIOTAP_CHANNEL: |
| /* |
| * If CHANNEL and XCHANNEL are both present, skip |
| * CHANNEL. |
| */ |
| if (presentflags & (1 << IEEE80211_RADIOTAP_XCHANNEL)) |
| break; |
| print_chaninfo(u.u16, u2.u16); |
| break; |
| case IEEE80211_RADIOTAP_FHSS: |
| printf("fhset %d fhpat %d ", u.u16 & 0xff, (u.u16 >> 8) & 0xff); |
| break; |
| case IEEE80211_RADIOTAP_RATE: |
| /* |
| * XXX On FreeBSD rate & 0x80 means we have an MCS. On |
| * Linux and AirPcap it does not. (What about |
| * Mac OS X, NetBSD, OpenBSD, and DragonFly BSD?) |
| * |
| * This is an issue either for proprietary extensions |
| * to 11a or 11g, which do exist, or for 11n |
| * implementations that stuff a rate value into |
| * this field, which also appear to exist. |
| * |
| * We currently handle that by assuming that |
| * if the 0x80 bit is set *and* the remaining |
| * bits have a value between 0 and 15 it's |
| * an MCS value, otherwise it's a rate. If |
| * there are cases where systems that use |
| * "0x80 + MCS index" for MCS indices > 15, |
| * or stuff a rate value here between 64 and |
| * 71.5 Mb/s in here, we'll need a preference |
| * setting. Such rates do exist, e.g. 11n |
| * MCS 7 at 20 MHz with a long guard interval. |
| */ |
| if (u.u8 >= 0x80 && u.u8 <= 0x8f) { |
| /* |
| * XXX - we don't know the channel width |
| * or guard interval length, so we can't |
| * convert this to a data rate. |
| * |
| * If you want us to show a data rate, |
| * use the MCS field, not the Rate field; |
| * the MCS field includes not only the |
| * MCS index, it also includes bandwidth |
| * and guard interval information. |
| * |
| * XXX - can we get the channel width |
| * from XChannel and the guard interval |
| * information from Flags, at least on |
| * FreeBSD? |
| */ |
| printf("MCS %u ", u.u8 & 0x7f); |
| } else |
| printf("%2.1f Mb/s ", .5*u.u8); |
| break; |
| case IEEE80211_RADIOTAP_DBM_ANTSIGNAL: |
| printf("%ddB signal ", u.i8); |
| break; |
| case IEEE80211_RADIOTAP_DBM_ANTNOISE: |
| printf("%ddB noise ", u.i8); |
| break; |
| case IEEE80211_RADIOTAP_DB_ANTSIGNAL: |
| printf("%ddB signal ", u.u8); |
| break; |
| case IEEE80211_RADIOTAP_DB_ANTNOISE: |
| printf("%ddB noise ", u.u8); |
| break; |
| case IEEE80211_RADIOTAP_LOCK_QUALITY: |
| printf("%u sq ", u.u16); |
| break; |
| case IEEE80211_RADIOTAP_TX_ATTENUATION: |
| printf("%d tx power ", -(int)u.u16); |
| break; |
| case IEEE80211_RADIOTAP_DB_TX_ATTENUATION: |
| printf("%ddB tx power ", -(int)u.u8); |
| break; |
| case IEEE80211_RADIOTAP_DBM_TX_POWER: |
| printf("%ddBm tx power ", u.i8); |
| break; |
| case IEEE80211_RADIOTAP_FLAGS: |
| if (u.u8 & IEEE80211_RADIOTAP_F_CFP) |
| printf("cfp "); |
| if (u.u8 & IEEE80211_RADIOTAP_F_SHORTPRE) |
| printf("short preamble "); |
| if (u.u8 & IEEE80211_RADIOTAP_F_WEP) |
| printf("wep "); |
| if (u.u8 & IEEE80211_RADIOTAP_F_FRAG) |
| printf("fragmented "); |
| if (u.u8 & IEEE80211_RADIOTAP_F_BADFCS) |
| printf("bad-fcs "); |
| break; |
| case IEEE80211_RADIOTAP_ANTENNA: |
| printf("antenna %d ", u.u8); |
| break; |
| case IEEE80211_RADIOTAP_TSFT: |
| printf("%" PRIu64 "us tsft ", u.u64); |
| break; |
| case IEEE80211_RADIOTAP_RX_FLAGS: |
| /* Do nothing for now */ |
| break; |
| case IEEE80211_RADIOTAP_XCHANNEL: |
| print_chaninfo(u2.u16, u.u32); |
| break; |
| case IEEE80211_RADIOTAP_MCS: { |
| static const char *bandwidth[4] = { |
| "20 MHz", |
| "40 MHz", |
| "20 MHz (L)", |
| "20 MHz (U)" |
| }; |
| float htrate; |
| |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_MCS_INDEX_KNOWN) { |
| /* |
| * We know the MCS index. |
| */ |
| if (u3.u8 <= MAX_MCS_INDEX) { |
| /* |
| * And it's in-range. |
| */ |
| if (u.u8 & (IEEE80211_RADIOTAP_MCS_BANDWIDTH_KNOWN|IEEE80211_RADIOTAP_MCS_GUARD_INTERVAL_KNOWN)) { |
| /* |
| * And we know both the bandwidth and |
| * the guard interval, so we can look |
| * up the rate. |
| */ |
| htrate = |
| ieee80211_float_htrates \ |
| [u3.u8] \ |
| [((u2.u8 & IEEE80211_RADIOTAP_MCS_BANDWIDTH_MASK) == IEEE80211_RADIOTAP_MCS_BANDWIDTH_40 ? 1 : 0)] \ |
| [((u2.u8 & IEEE80211_RADIOTAP_MCS_SHORT_GI) ? 1 : 0)]; |
| } else { |
| /* |
| * We don't know both the bandwidth |
| * and the guard interval, so we can |
| * only report the MCS index. |
| */ |
| htrate = 0.0; |
| } |
| } else { |
| /* |
| * The MCS value is out of range. |
| */ |
| htrate = 0.0; |
| } |
| if (htrate != 0.0) { |
| /* |
| * We have the rate. |
| * Print it. |
| */ |
| printf("%.1f Mb/s MCS %u ", htrate, u3.u8); |
| } else { |
| /* |
| * We at least have the MCS index. |
| * Print it. |
| */ |
| printf("MCS %u ", u3.u8); |
| } |
| } |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_BANDWIDTH_KNOWN) { |
| printf("%s ", |
| bandwidth[u2.u8 & IEEE80211_RADIOTAP_MCS_BANDWIDTH_MASK]); |
| } |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_GUARD_INTERVAL_KNOWN) { |
| printf("%s GI ", |
| (u2.u8 & IEEE80211_RADIOTAP_MCS_SHORT_GI) ? |
| "short" : "lon"); |
| } |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_HT_FORMAT_KNOWN) { |
| printf("%s ", |
| (u2.u8 & IEEE80211_RADIOTAP_MCS_HT_GREENFIELD) ? |
| "greenfield" : "mixed"); |
| } |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_FEC_TYPE_KNOWN) { |
| printf("%s FEC ", |
| (u2.u8 & IEEE80211_RADIOTAP_MCS_FEC_LDPC) ? |
| "LDPC" : "BCC"); |
| } |
| if (u.u8 & IEEE80211_RADIOTAP_MCS_STBC_KNOWN) { |
| printf("RX-STBC%u ", |
| (u2.u8 & IEEE80211_RADIOTAP_MCS_STBC_MASK) >> IEEE80211_RADIOTAP_MCS_STBC_SHIFT); |
| } |
| |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| static u_int |
| ieee802_11_radio_print(const u_char *p, u_int length, u_int caplen) |
| { |
| #define BITNO_32(x) (((x) >> 16) ? 16 + BITNO_16((x) >> 16) : BITNO_16((x))) |
| #define BITNO_16(x) (((x) >> 8) ? 8 + BITNO_8((x) >> 8) : BITNO_8((x))) |
| #define BITNO_8(x) (((x) >> 4) ? 4 + BITNO_4((x) >> 4) : BITNO_4((x))) |
| #define BITNO_4(x) (((x) >> 2) ? 2 + BITNO_2((x) >> 2) : BITNO_2((x))) |
| #define BITNO_2(x) (((x) & 2) ? 1 : 0) |
| #define BIT(n) (1U << n) |
| #define IS_EXTENDED(__p) \ |
| (EXTRACT_LE_32BITS(__p) & BIT(IEEE80211_RADIOTAP_EXT)) != 0 |
| |
| struct cpack_state cpacker; |
| struct ieee80211_radiotap_header *hdr; |
| u_int32_t present, next_present; |
| u_int32_t presentflags = 0; |
| u_int32_t *presentp, *last_presentp; |
| enum ieee80211_radiotap_type bit; |
| int bit0; |
| u_int len; |
| u_int8_t flags; |
| int pad; |
| u_int fcslen; |
| struct radiotap_state state; |
| |
| if (caplen < sizeof(*hdr)) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| hdr = (struct ieee80211_radiotap_header *)p; |
| |
| len = EXTRACT_LE_16BITS(&hdr->it_len); |
| |
| if (caplen < len) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| cpack_init(&cpacker, (u_int8_t *)hdr, len); /* align against header start */ |
| cpack_advance(&cpacker, sizeof(*hdr)); /* includes the 1st bitmap */ |
| for (last_presentp = &hdr->it_present; |
| IS_EXTENDED(last_presentp) && |
| (u_char*)(last_presentp + 1) <= p + len; |
| last_presentp++) |
| cpack_advance(&cpacker, sizeof(hdr->it_present)); /* more bitmaps */ |
| |
| /* are there more bitmap extensions than bytes in header? */ |
| if (IS_EXTENDED(last_presentp)) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| /* Assume no flags */ |
| flags = 0; |
| /* Assume no Atheros padding between 802.11 header and body */ |
| pad = 0; |
| /* Assume no FCS at end of frame */ |
| fcslen = 0; |
| for (bit0 = 0, presentp = &hdr->it_present; presentp <= last_presentp; |
| presentp++, bit0 += 32) { |
| presentflags = EXTRACT_LE_32BITS(presentp); |
| |
| /* Clear state. */ |
| memset(&state, 0, sizeof(state)); |
| |
| for (present = EXTRACT_LE_32BITS(presentp); present; |
| present = next_present) { |
| /* clear the least significant bit that is set */ |
| next_present = present & (present - 1); |
| |
| /* extract the least significant bit that is set */ |
| bit = (enum ieee80211_radiotap_type) |
| (bit0 + BITNO_32(present ^ next_present)); |
| |
| if (print_radiotap_field(&cpacker, bit, &flags, &state, presentflags) != 0) |
| goto out; |
| } |
| } |
| |
| out: |
| if (flags & IEEE80211_RADIOTAP_F_DATAPAD) |
| pad = 1; /* Atheros padding */ |
| if (flags & IEEE80211_RADIOTAP_F_FCS) |
| fcslen = 4; /* FCS at end of packet */ |
| return len + ieee802_11_print(p + len, length - len, caplen - len, pad, |
| fcslen); |
| #undef BITNO_32 |
| #undef BITNO_16 |
| #undef BITNO_8 |
| #undef BITNO_4 |
| #undef BITNO_2 |
| #undef BIT |
| } |
| |
| static u_int |
| ieee802_11_avs_radio_print(const u_char *p, u_int length, u_int caplen) |
| { |
| u_int32_t caphdr_len; |
| |
| if (caplen < 8) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| caphdr_len = EXTRACT_32BITS(p + 4); |
| if (caphdr_len < 8) { |
| /* |
| * Yow! The capture header length is claimed not |
| * to be large enough to include even the version |
| * cookie or capture header length! |
| */ |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| if (caplen < caphdr_len) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| return caphdr_len + ieee802_11_print(p + caphdr_len, |
| length - caphdr_len, caplen - caphdr_len, 0, 0); |
| } |
| |
| #define PRISM_HDR_LEN 144 |
| |
| #define WLANCAP_MAGIC_COOKIE_BASE 0x80211000 |
| #define WLANCAP_MAGIC_COOKIE_V1 0x80211001 |
| #define WLANCAP_MAGIC_COOKIE_V2 0x80211002 |
| |
| /* |
| * For DLT_PRISM_HEADER; like DLT_IEEE802_11, but with an extra header, |
| * containing information such as radio information, which we |
| * currently ignore. |
| * |
| * If, however, the packet begins with WLANCAP_MAGIC_COOKIE_V1 or |
| * WLANCAP_MAGIC_COOKIE_V2, it's really DLT_IEEE802_11_RADIO_AVS |
| * (currently, on Linux, there's no ARPHRD_ type for |
| * DLT_IEEE802_11_RADIO_AVS, as there is a ARPHRD_IEEE80211_PRISM |
| * for DLT_PRISM_HEADER, so ARPHRD_IEEE80211_PRISM is used for |
| * the AVS header, and the first 4 bytes of the header are used to |
| * indicate whether it's a Prism header or an AVS header). |
| */ |
| u_int |
| prism_if_print(const struct pcap_pkthdr *h, const u_char *p) |
| { |
| u_int caplen = h->caplen; |
| u_int length = h->len; |
| u_int32_t msgcode; |
| |
| if (caplen < 4) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| msgcode = EXTRACT_32BITS(p); |
| if (msgcode == WLANCAP_MAGIC_COOKIE_V1 || |
| msgcode == WLANCAP_MAGIC_COOKIE_V2) |
| return ieee802_11_avs_radio_print(p, length, caplen); |
| |
| if (caplen < PRISM_HDR_LEN) { |
| printf("[|802.11]"); |
| return caplen; |
| } |
| |
| return PRISM_HDR_LEN + ieee802_11_print(p + PRISM_HDR_LEN, |
| length - PRISM_HDR_LEN, caplen - PRISM_HDR_LEN, 0, 0); |
| } |
| |
| /* |
| * For DLT_IEEE802_11_RADIO; like DLT_IEEE802_11, but with an extra |
| * header, containing information such as radio information. |
| */ |
| u_int |
| ieee802_11_radio_if_print(const struct pcap_pkthdr *h, const u_char *p) |
| { |
| return ieee802_11_radio_print(p, h->len, h->caplen); |
| } |
| |
| /* |
| * For DLT_IEEE802_11_RADIO_AVS; like DLT_IEEE802_11, but with an |
| * extra header, containing information such as radio information, |
| * which we currently ignore. |
| */ |
| u_int |
| ieee802_11_radio_avs_if_print(const struct pcap_pkthdr *h, const u_char *p) |
| { |
| return ieee802_11_avs_radio_print(p, h->len, h->caplen); |
| } |