| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| // #define LOG_NDEBUG 0 |
| #define LOG_TAG "SurfaceMediaSource" |
| |
| #include <media/stagefright/SurfaceMediaSource.h> |
| #include <ui/GraphicBuffer.h> |
| #include <media/stagefright/MetaData.h> |
| #include <media/stagefright/MediaDefs.h> |
| #include <media/stagefright/MediaDebug.h> |
| #include <media/stagefright/openmax/OMX_IVCommon.h> |
| #include <media/stagefright/MetadataBufferType.h> |
| |
| #include <surfaceflinger/ISurfaceComposer.h> |
| #include <surfaceflinger/SurfaceComposerClient.h> |
| #include <surfaceflinger/IGraphicBufferAlloc.h> |
| #include <OMX_Component.h> |
| |
| #include <utils/Log.h> |
| #include <utils/String8.h> |
| |
| namespace android { |
| |
| SurfaceMediaSource::SurfaceMediaSource(uint32_t bufW, uint32_t bufH) : |
| mDefaultWidth(bufW), |
| mDefaultHeight(bufH), |
| mPixelFormat(0), |
| mBufferCount(MIN_ASYNC_BUFFER_SLOTS), |
| mClientBufferCount(0), |
| mServerBufferCount(MIN_ASYNC_BUFFER_SLOTS), |
| mCurrentSlot(INVALID_BUFFER_SLOT), |
| mCurrentTimestamp(0), |
| mSynchronousMode(true), |
| mConnectedApi(NO_CONNECTED_API), |
| mFrameRate(30), |
| mNumFramesReceived(0), |
| mNumFramesEncoded(0), |
| mStopped(false) { |
| LOGV("SurfaceMediaSource::SurfaceMediaSource"); |
| sp<ISurfaceComposer> composer(ComposerService::getComposerService()); |
| mGraphicBufferAlloc = composer->createGraphicBufferAlloc(); |
| } |
| |
| SurfaceMediaSource::~SurfaceMediaSource() { |
| LOGV("SurfaceMediaSource::~SurfaceMediaSource"); |
| if (!mStopped) { |
| stop(); |
| } |
| } |
| |
| size_t SurfaceMediaSource::getQueuedCount() const { |
| Mutex::Autolock lock(mMutex); |
| return mQueue.size(); |
| } |
| |
| status_t SurfaceMediaSource::setBufferCountServerLocked(int bufferCount) { |
| if (bufferCount > NUM_BUFFER_SLOTS) |
| return BAD_VALUE; |
| |
| // special-case, nothing to do |
| if (bufferCount == mBufferCount) |
| return OK; |
| |
| if (!mClientBufferCount && |
| bufferCount >= mBufferCount) { |
| // easy, we just have more buffers |
| mBufferCount = bufferCount; |
| mServerBufferCount = bufferCount; |
| mDequeueCondition.signal(); |
| } else { |
| // we're here because we're either |
| // - reducing the number of available buffers |
| // - or there is a client-buffer-count in effect |
| |
| // less than 2 buffers is never allowed |
| if (bufferCount < 2) |
| return BAD_VALUE; |
| |
| // when there is non client-buffer-count in effect, the client is not |
| // allowed to dequeue more than one buffer at a time, |
| // so the next time they dequeue a buffer, we know that they don't |
| // own one. the actual resizing will happen during the next |
| // dequeueBuffer. |
| |
| mServerBufferCount = bufferCount; |
| } |
| return OK; |
| } |
| |
| // Called from the consumer side |
| status_t SurfaceMediaSource::setBufferCountServer(int bufferCount) { |
| Mutex::Autolock lock(mMutex); |
| return setBufferCountServerLocked(bufferCount); |
| } |
| |
| status_t SurfaceMediaSource::setBufferCount(int bufferCount) { |
| LOGV("SurfaceMediaSource::setBufferCount"); |
| if (bufferCount > NUM_BUFFER_SLOTS) { |
| LOGE("setBufferCount: bufferCount is larger than the number of buffer slots"); |
| return BAD_VALUE; |
| } |
| |
| Mutex::Autolock lock(mMutex); |
| // Error out if the user has dequeued buffers |
| for (int i = 0 ; i < mBufferCount ; i++) { |
| if (mSlots[i].mBufferState == BufferSlot::DEQUEUED) { |
| LOGE("setBufferCount: client owns some buffers"); |
| return INVALID_OPERATION; |
| } |
| } |
| |
| if (bufferCount == 0) { |
| const int minBufferSlots = mSynchronousMode ? |
| MIN_SYNC_BUFFER_SLOTS : MIN_ASYNC_BUFFER_SLOTS; |
| mClientBufferCount = 0; |
| bufferCount = (mServerBufferCount >= minBufferSlots) ? |
| mServerBufferCount : minBufferSlots; |
| return setBufferCountServerLocked(bufferCount); |
| } |
| |
| // We don't allow the client to set a buffer-count less than |
| // MIN_ASYNC_BUFFER_SLOTS (3), there is no reason for it. |
| if (bufferCount < MIN_ASYNC_BUFFER_SLOTS) { |
| return BAD_VALUE; |
| } |
| |
| // here we're guaranteed that the client doesn't have dequeued buffers |
| // and will release all of its buffer references. |
| mBufferCount = bufferCount; |
| mClientBufferCount = bufferCount; |
| mCurrentSlot = INVALID_BUFFER_SLOT; |
| mQueue.clear(); |
| mDequeueCondition.signal(); |
| freeAllBuffersLocked(); |
| return OK; |
| } |
| |
| status_t SurfaceMediaSource::requestBuffer(int slot, sp<GraphicBuffer>* buf) { |
| LOGV("SurfaceMediaSource::requestBuffer"); |
| Mutex::Autolock lock(mMutex); |
| if (slot < 0 || mBufferCount <= slot) { |
| LOGE("requestBuffer: slot index out of range [0, %d]: %d", |
| mBufferCount, slot); |
| return BAD_VALUE; |
| } |
| mSlots[slot].mRequestBufferCalled = true; |
| *buf = mSlots[slot].mGraphicBuffer; |
| return NO_ERROR; |
| } |
| |
| status_t SurfaceMediaSource::dequeueBuffer(int *outBuf, uint32_t w, uint32_t h, |
| uint32_t format, uint32_t usage) { |
| LOGV("dequeueBuffer"); |
| Mutex::Autolock lock(mMutex); |
| |
| // Check for the buffer size- the client should just use the |
| // default width and height, and not try to set those. |
| // This is needed since |
| // the getFormat() returns mDefaultWidth/ Height for the OMX. It is |
| // queried by OMX in the beginning and not every time a frame comes. |
| // Not sure if there is a way to update the |
| // frame size while recording. So as of now, the client side |
| // sets the default values via the constructor, and the encoder is |
| // setup to encode frames of that size |
| // The design might need to change in the future. |
| // TODO: Currently just uses mDefaultWidth/Height. In the future |
| // we might declare mHeight and mWidth and check against those here. |
| if ((w != 0) || (h != 0)) { |
| LOGE("dequeuebuffer: invalid buffer size! Req: %dx%d, Found: %dx%d", |
| mDefaultWidth, mDefaultHeight, w, h); |
| return BAD_VALUE; |
| } |
| |
| status_t returnFlags(OK); |
| int found, foundSync; |
| int dequeuedCount = 0; |
| bool tryAgain = true; |
| while (tryAgain) { |
| // We need to wait for the FIFO to drain if the number of buffer |
| // needs to change. |
| // |
| // The condition "number of buffer needs to change" is true if |
| // - the client doesn't care about how many buffers there are |
| // - AND the actual number of buffer is different from what was |
| // set in the last setBufferCountServer() |
| // - OR - |
| // setBufferCountServer() was set to a value incompatible with |
| // the synchronization mode (for instance because the sync mode |
| // changed since) |
| // |
| // As long as this condition is true AND the FIFO is not empty, we |
| // wait on mDequeueCondition. |
| |
| int minBufferCountNeeded = mSynchronousMode ? |
| MIN_SYNC_BUFFER_SLOTS : MIN_ASYNC_BUFFER_SLOTS; |
| |
| if (!mClientBufferCount && |
| ((mServerBufferCount != mBufferCount) || |
| (mServerBufferCount < minBufferCountNeeded))) { |
| // wait for the FIFO to drain |
| while (!mQueue.isEmpty()) { |
| LOGV("Waiting for the FIFO to drain"); |
| mDequeueCondition.wait(mMutex); |
| } |
| if (mStopped) { |
| return NO_INIT; |
| } |
| // need to check again since the mode could have changed |
| // while we were waiting |
| minBufferCountNeeded = mSynchronousMode ? |
| MIN_SYNC_BUFFER_SLOTS : MIN_ASYNC_BUFFER_SLOTS; |
| } |
| |
| if (!mClientBufferCount && |
| ((mServerBufferCount != mBufferCount) || |
| (mServerBufferCount < minBufferCountNeeded))) { |
| // here we're guaranteed that mQueue is empty |
| freeAllBuffersLocked(); |
| mBufferCount = mServerBufferCount; |
| if (mBufferCount < minBufferCountNeeded) |
| mBufferCount = minBufferCountNeeded; |
| mCurrentSlot = INVALID_BUFFER_SLOT; |
| returnFlags |= ISurfaceTexture::RELEASE_ALL_BUFFERS; |
| } |
| |
| // look for a free buffer to give to the client |
| found = INVALID_BUFFER_SLOT; |
| foundSync = INVALID_BUFFER_SLOT; |
| dequeuedCount = 0; |
| for (int i = 0; i < mBufferCount; i++) { |
| const int state = mSlots[i].mBufferState; |
| if (state == BufferSlot::DEQUEUED) { |
| dequeuedCount++; |
| continue; // won't be continuing if could |
| // dequeue a non 'FREE' current slot like |
| // that in SurfaceTexture |
| } |
| // In case of Encoding, we do not deque the mCurrentSlot buffer |
| // since we follow synchronous mode (unlike possibly in |
| // SurfaceTexture that could be using the asynch mode |
| // or has some mechanism in GL to be able to wait till the |
| // currentslot is done using the data) |
| // Here, we have to wait for the MPEG4Writer(or equiv) |
| // to tell us when it's done using the current buffer |
| if (state == BufferSlot::FREE) { |
| foundSync = i; |
| // Unlike that in SurfaceTexture, |
| // We don't need to worry if it is the |
| // currentslot or not as it is in state FREE |
| found = i; |
| break; |
| } |
| } |
| |
| // clients are not allowed to dequeue more than one buffer |
| // if they didn't set a buffer count. |
| if (!mClientBufferCount && dequeuedCount) { |
| return -EINVAL; |
| } |
| |
| // See whether a buffer has been queued since the last setBufferCount so |
| // we know whether to perform the MIN_UNDEQUEUED_BUFFERS check below. |
| bool bufferHasBeenQueued = mCurrentSlot != INVALID_BUFFER_SLOT; |
| if (bufferHasBeenQueued) { |
| // make sure the client is not trying to dequeue more buffers |
| // than allowed. |
| const int avail = mBufferCount - (dequeuedCount+1); |
| if (avail < (MIN_UNDEQUEUED_BUFFERS-int(mSynchronousMode))) { |
| LOGE("dequeueBuffer: MIN_UNDEQUEUED_BUFFERS=%d exceeded (dequeued=%d)", |
| MIN_UNDEQUEUED_BUFFERS-int(mSynchronousMode), |
| dequeuedCount); |
| return -EBUSY; |
| } |
| } |
| |
| // we're in synchronous mode and didn't find a buffer, we need to wait |
| // for for some buffers to be consumed |
| tryAgain = mSynchronousMode && (foundSync == INVALID_BUFFER_SLOT); |
| if (tryAgain) { |
| LOGV("Waiting..In synchronous mode and no buffer to dequeue"); |
| mDequeueCondition.wait(mMutex); |
| } |
| if (mStopped) { |
| return NO_INIT; |
| } |
| } |
| |
| if (mSynchronousMode && found == INVALID_BUFFER_SLOT) { |
| // foundSync guaranteed to be != INVALID_BUFFER_SLOT |
| found = foundSync; |
| } |
| |
| if (found == INVALID_BUFFER_SLOT) { |
| return -EBUSY; |
| } |
| |
| const int bufIndex = found; |
| *outBuf = found; |
| |
| const bool useDefaultSize = !w && !h; |
| if (useDefaultSize) { |
| // use the default size |
| w = mDefaultWidth; |
| h = mDefaultHeight; |
| } |
| |
| const bool updateFormat = (format != 0); |
| if (!updateFormat) { |
| // keep the current (or default) format |
| format = mPixelFormat; |
| } |
| |
| // buffer is now in DEQUEUED (but can also be current at the same time, |
| // if we're in synchronous mode) |
| mSlots[bufIndex].mBufferState = BufferSlot::DEQUEUED; |
| |
| const sp<GraphicBuffer>& buffer(mSlots[bufIndex].mGraphicBuffer); |
| if ((buffer == NULL) || |
| (uint32_t(buffer->width) != w) || |
| (uint32_t(buffer->height) != h) || |
| (uint32_t(buffer->format) != format) || |
| ((uint32_t(buffer->usage) & usage) != usage)) { |
| usage |= GraphicBuffer::USAGE_HW_TEXTURE; |
| status_t error; |
| sp<GraphicBuffer> graphicBuffer( |
| mGraphicBufferAlloc->createGraphicBuffer( |
| w, h, format, usage, &error)); |
| if (graphicBuffer == 0) { |
| LOGE("dequeueBuffer: SurfaceComposer::createGraphicBuffer failed"); |
| return error; |
| } |
| if (updateFormat) { |
| mPixelFormat = format; |
| } |
| mSlots[bufIndex].mGraphicBuffer = graphicBuffer; |
| mSlots[bufIndex].mRequestBufferCalled = false; |
| returnFlags |= ISurfaceTexture::BUFFER_NEEDS_REALLOCATION; |
| } |
| return returnFlags; |
| } |
| |
| // TODO: clean this up |
| status_t SurfaceMediaSource::setSynchronousMode(bool enabled) { |
| Mutex::Autolock lock(mMutex); |
| if (mStopped) { |
| LOGE("setSynchronousMode: SurfaceMediaSource has been stopped!"); |
| return NO_INIT; |
| } |
| |
| if (!enabled) { |
| // Async mode is not allowed |
| LOGE("SurfaceMediaSource can be used only synchronous mode!"); |
| return INVALID_OPERATION; |
| } |
| |
| if (mSynchronousMode != enabled) { |
| // - if we're going to asynchronous mode, the queue is guaranteed to be |
| // empty here |
| // - if the client set the number of buffers, we're guaranteed that |
| // we have at least 3 (because we don't allow less) |
| mSynchronousMode = enabled; |
| mDequeueCondition.signal(); |
| } |
| return OK; |
| } |
| |
| status_t SurfaceMediaSource::connect(int api, |
| uint32_t* outWidth, uint32_t* outHeight, uint32_t* outTransform) { |
| LOGV("SurfaceMediaSource::connect"); |
| Mutex::Autolock lock(mMutex); |
| |
| if (mStopped) { |
| LOGE("Connect: SurfaceMediaSource has been stopped!"); |
| return NO_INIT; |
| } |
| |
| status_t err = NO_ERROR; |
| switch (api) { |
| case NATIVE_WINDOW_API_EGL: |
| case NATIVE_WINDOW_API_CPU: |
| case NATIVE_WINDOW_API_MEDIA: |
| case NATIVE_WINDOW_API_CAMERA: |
| if (mConnectedApi != NO_CONNECTED_API) { |
| err = -EINVAL; |
| } else { |
| mConnectedApi = api; |
| *outWidth = mDefaultWidth; |
| *outHeight = mDefaultHeight; |
| *outTransform = 0; |
| } |
| break; |
| default: |
| err = -EINVAL; |
| break; |
| } |
| return err; |
| } |
| |
| // This is called by the client side when it is done |
| // TODO: Currently, this also sets mStopped to true which |
| // is needed for unblocking the encoder which might be |
| // waiting to read more frames. So if on the client side, |
| // the same thread supplies the frames and also calls stop |
| // on the encoder, the client has to call disconnect before |
| // it calls stop. |
| // In the case of the camera, |
| // that need not be required since the thread supplying the |
| // frames is separate than the one calling stop. |
| status_t SurfaceMediaSource::disconnect(int api) { |
| LOGV("SurfaceMediaSource::disconnect"); |
| Mutex::Autolock lock(mMutex); |
| |
| if (mStopped) { |
| LOGE("disconnect: SurfaceMediaSoource is already stopped!"); |
| return NO_INIT; |
| } |
| |
| status_t err = NO_ERROR; |
| switch (api) { |
| case NATIVE_WINDOW_API_EGL: |
| case NATIVE_WINDOW_API_CPU: |
| case NATIVE_WINDOW_API_MEDIA: |
| case NATIVE_WINDOW_API_CAMERA: |
| if (mConnectedApi == api) { |
| mConnectedApi = NO_CONNECTED_API; |
| mStopped = true; |
| mDequeueCondition.signal(); |
| mFrameAvailableCondition.signal(); |
| } else { |
| err = -EINVAL; |
| } |
| break; |
| default: |
| err = -EINVAL; |
| break; |
| } |
| return err; |
| } |
| |
| status_t SurfaceMediaSource::queueBuffer(int bufIndex, int64_t timestamp, |
| uint32_t* outWidth, uint32_t* outHeight, uint32_t* outTransform) { |
| LOGV("queueBuffer"); |
| |
| Mutex::Autolock lock(mMutex); |
| if (bufIndex < 0 || bufIndex >= mBufferCount) { |
| LOGE("queueBuffer: slot index out of range [0, %d]: %d", |
| mBufferCount, bufIndex); |
| return -EINVAL; |
| } else if (mSlots[bufIndex].mBufferState != BufferSlot::DEQUEUED) { |
| LOGE("queueBuffer: slot %d is not owned by the client (state=%d)", |
| bufIndex, mSlots[bufIndex].mBufferState); |
| return -EINVAL; |
| } else if (!mSlots[bufIndex].mRequestBufferCalled) { |
| LOGE("queueBuffer: slot %d was enqueued without requesting a " |
| "buffer", bufIndex); |
| return -EINVAL; |
| } |
| |
| if (mSynchronousMode) { |
| // in synchronous mode we queue all buffers in a FIFO |
| mQueue.push_back(bufIndex); |
| mNumFramesReceived++; |
| LOGV("Client queued buf# %d @slot: %d, Q size = %d, handle = %p, timestamp = %lld", |
| mNumFramesReceived, bufIndex, mQueue.size(), |
| mSlots[bufIndex].mGraphicBuffer->handle, timestamp); |
| } else { |
| // in asynchronous mode we only keep the most recent buffer |
| if (mQueue.empty()) { |
| mQueue.push_back(bufIndex); |
| } else { |
| Fifo::iterator front(mQueue.begin()); |
| // buffer currently queued is freed |
| mSlots[*front].mBufferState = BufferSlot::FREE; |
| // and we record the new buffer index in the queued list |
| *front = bufIndex; |
| } |
| } |
| |
| mSlots[bufIndex].mBufferState = BufferSlot::QUEUED; |
| mSlots[bufIndex].mTimestamp = timestamp; |
| // TODO: (Confirm) Don't want to signal dequeue here. |
| // May be just in asynchronous mode? |
| // mDequeueCondition.signal(); |
| |
| // Once the queuing is done, we need to let the listener |
| // and signal the buffer consumer (encoder) know that a |
| // buffer is available |
| onFrameReceivedLocked(); |
| |
| *outWidth = mDefaultWidth; |
| *outHeight = mDefaultHeight; |
| *outTransform = 0; |
| |
| return OK; |
| } |
| |
| |
| // onFrameReceivedLocked informs the buffer consumers (StageFrightRecorder) |
| // or listeners that a frame has been received |
| // It is supposed to be called only from queuebuffer. |
| // The buffer is NOT made available for dequeueing immediately. We need to |
| // wait to hear from StageFrightRecorder to set the buffer FREE |
| // Make sure this is called when the mutex is locked |
| status_t SurfaceMediaSource::onFrameReceivedLocked() { |
| LOGV("On Frame Received locked"); |
| // Signal the encoder that a new frame has arrived |
| mFrameAvailableCondition.signal(); |
| |
| // call back the listener |
| // TODO: The listener may not be needed in SurfaceMediaSource at all. |
| // This can be made a SurfaceTexture specific thing |
| sp<FrameAvailableListener> listener; |
| if (mSynchronousMode || mQueue.empty()) { |
| listener = mFrameAvailableListener; |
| } |
| |
| if (listener != 0) { |
| listener->onFrameAvailable(); |
| } |
| return OK; |
| } |
| |
| |
| void SurfaceMediaSource::cancelBuffer(int bufIndex) { |
| LOGV("SurfaceMediaSource::cancelBuffer"); |
| Mutex::Autolock lock(mMutex); |
| if (bufIndex < 0 || bufIndex >= mBufferCount) { |
| LOGE("cancelBuffer: slot index out of range [0, %d]: %d", |
| mBufferCount, bufIndex); |
| return; |
| } else if (mSlots[bufIndex].mBufferState != BufferSlot::DEQUEUED) { |
| LOGE("cancelBuffer: slot %d is not owned by the client (state=%d)", |
| bufIndex, mSlots[bufIndex].mBufferState); |
| return; |
| } |
| mSlots[bufIndex].mBufferState = BufferSlot::FREE; |
| mDequeueCondition.signal(); |
| } |
| |
| nsecs_t SurfaceMediaSource::getTimestamp() { |
| LOGV("SurfaceMediaSource::getTimestamp"); |
| Mutex::Autolock lock(mMutex); |
| return mCurrentTimestamp; |
| } |
| |
| |
| void SurfaceMediaSource::setFrameAvailableListener( |
| const sp<FrameAvailableListener>& listener) { |
| LOGV("SurfaceMediaSource::setFrameAvailableListener"); |
| Mutex::Autolock lock(mMutex); |
| mFrameAvailableListener = listener; |
| } |
| |
| void SurfaceMediaSource::freeAllBuffersLocked() { |
| LOGV("freeAllBuffersLocked"); |
| for (int i = 0; i < NUM_BUFFER_SLOTS; i++) { |
| mSlots[i].mGraphicBuffer = 0; |
| mSlots[i].mBufferState = BufferSlot::FREE; |
| } |
| } |
| |
| sp<GraphicBuffer> SurfaceMediaSource::getCurrentBuffer() const { |
| Mutex::Autolock lock(mMutex); |
| return mCurrentBuf; |
| } |
| |
| int SurfaceMediaSource::query(int what, int* outValue) |
| { |
| LOGV("query"); |
| Mutex::Autolock lock(mMutex); |
| int value; |
| switch (what) { |
| case NATIVE_WINDOW_WIDTH: |
| value = mDefaultWidth; |
| if (!mDefaultWidth && !mDefaultHeight && mCurrentBuf != 0) |
| value = mCurrentBuf->width; |
| break; |
| case NATIVE_WINDOW_HEIGHT: |
| value = mDefaultHeight; |
| if (!mDefaultWidth && !mDefaultHeight && mCurrentBuf != 0) |
| value = mCurrentBuf->height; |
| break; |
| case NATIVE_WINDOW_FORMAT: |
| value = mPixelFormat; |
| break; |
| case NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS: |
| value = mSynchronousMode ? |
| (MIN_UNDEQUEUED_BUFFERS-1) : MIN_UNDEQUEUED_BUFFERS; |
| break; |
| default: |
| return BAD_VALUE; |
| } |
| outValue[0] = value; |
| return NO_ERROR; |
| } |
| |
| void SurfaceMediaSource::dump(String8& result) const |
| { |
| char buffer[1024]; |
| dump(result, "", buffer, 1024); |
| } |
| |
| void SurfaceMediaSource::dump(String8& result, const char* prefix, |
| char* buffer, size_t SIZE) const |
| { |
| Mutex::Autolock _l(mMutex); |
| snprintf(buffer, SIZE, |
| "%smBufferCount=%d, mSynchronousMode=%d, default-size=[%dx%d], " |
| "mPixelFormat=%d, \n", |
| prefix, mBufferCount, mSynchronousMode, mDefaultWidth, mDefaultHeight, |
| mPixelFormat); |
| result.append(buffer); |
| |
| String8 fifo; |
| int fifoSize = 0; |
| Fifo::const_iterator i(mQueue.begin()); |
| while (i != mQueue.end()) { |
| snprintf(buffer, SIZE, "%02d ", *i++); |
| fifoSize++; |
| fifo.append(buffer); |
| } |
| |
| result.append(buffer); |
| |
| struct { |
| const char * operator()(int state) const { |
| switch (state) { |
| case BufferSlot::DEQUEUED: return "DEQUEUED"; |
| case BufferSlot::QUEUED: return "QUEUED"; |
| case BufferSlot::FREE: return "FREE"; |
| default: return "Unknown"; |
| } |
| } |
| } stateName; |
| |
| for (int i = 0; i < mBufferCount; i++) { |
| const BufferSlot& slot(mSlots[i]); |
| snprintf(buffer, SIZE, |
| "%s%s[%02d] state=%-8s, " |
| "timestamp=%lld\n", |
| prefix, (i==mCurrentSlot)?">":" ", i, stateName(slot.mBufferState), |
| slot.mTimestamp |
| ); |
| result.append(buffer); |
| } |
| } |
| |
| status_t SurfaceMediaSource::setFrameRate(int32_t fps) |
| { |
| Mutex::Autolock lock(mMutex); |
| const int MAX_FRAME_RATE = 60; |
| if (fps < 0 || fps > MAX_FRAME_RATE) { |
| return BAD_VALUE; |
| } |
| mFrameRate = fps; |
| return OK; |
| } |
| |
| bool SurfaceMediaSource::isMetaDataStoredInVideoBuffers() const { |
| LOGV("isMetaDataStoredInVideoBuffers"); |
| return true; |
| } |
| |
| int32_t SurfaceMediaSource::getFrameRate( ) const { |
| Mutex::Autolock lock(mMutex); |
| return mFrameRate; |
| } |
| |
| status_t SurfaceMediaSource::start(MetaData *params) |
| { |
| LOGV("started!"); |
| return OK; |
| } |
| |
| |
| status_t SurfaceMediaSource::stop() |
| { |
| LOGV("Stop"); |
| |
| Mutex::Autolock lock(mMutex); |
| // TODO: Add waiting on mFrameCompletedCondition here? |
| mStopped = true; |
| mFrameAvailableCondition.signal(); |
| mDequeueCondition.signal(); |
| mQueue.clear(); |
| freeAllBuffersLocked(); |
| |
| return OK; |
| } |
| |
| sp<MetaData> SurfaceMediaSource::getFormat() |
| { |
| LOGV("getFormat"); |
| Mutex::Autolock autoLock(mMutex); |
| sp<MetaData> meta = new MetaData; |
| |
| meta->setInt32(kKeyWidth, mDefaultWidth); |
| meta->setInt32(kKeyHeight, mDefaultHeight); |
| // The encoder format is set as an opaque colorformat |
| // The encoder will later find out the actual colorformat |
| // from the GL Frames itself. |
| meta->setInt32(kKeyColorFormat, OMX_COLOR_FormatAndroidOpaque); |
| meta->setInt32(kKeyStride, mDefaultWidth); |
| meta->setInt32(kKeySliceHeight, mDefaultHeight); |
| meta->setInt32(kKeyFrameRate, mFrameRate); |
| meta->setCString(kKeyMIMEType, MEDIA_MIMETYPE_VIDEO_RAW); |
| return meta; |
| } |
| |
| status_t SurfaceMediaSource::read( MediaBuffer **buffer, |
| const ReadOptions *options) |
| { |
| Mutex::Autolock autoLock(mMutex) ; |
| |
| LOGV("Read. Size of queued buffer: %d", mQueue.size()); |
| *buffer = NULL; |
| |
| // If the recording has started and the queue is empty, then just |
| // wait here till the frames come in from the client side |
| while (!mStopped && mQueue.empty()) { |
| LOGV("NO FRAMES! Recorder waiting for FrameAvailableCondition"); |
| mFrameAvailableCondition.wait(mMutex); |
| } |
| |
| // If the loop was exited as a result of stopping the recording, |
| // it is OK |
| if (mStopped) { |
| LOGV("Read: SurfaceMediaSource is stopped. Returning NO_INIT;"); |
| return NO_INIT; |
| } |
| |
| // Update the current buffer info |
| // TODO: mCurrentSlot can be made a bufferstate since there |
| // can be more than one "current" slots. |
| Fifo::iterator front(mQueue.begin()); |
| mCurrentSlot = *front; |
| mQueue.erase(front); |
| mCurrentBuf = mSlots[mCurrentSlot].mGraphicBuffer; |
| int64_t prevTimeStamp = mCurrentTimestamp; |
| mCurrentTimestamp = mSlots[mCurrentSlot].mTimestamp; |
| mNumFramesEncoded++; |
| // Pass the data to the MediaBuffer. Pass in only the metadata |
| passMetadataBufferLocked(buffer); |
| |
| (*buffer)->setObserver(this); |
| (*buffer)->add_ref(); |
| (*buffer)->meta_data()->setInt64(kKeyTime, mCurrentTimestamp / 1000); |
| LOGV("Frames encoded = %d, timestamp = %lld, time diff = %lld", |
| mNumFramesEncoded, mCurrentTimestamp / 1000, |
| mCurrentTimestamp / 1000 - prevTimeStamp / 1000); |
| |
| return OK; |
| } |
| |
| // Pass the data to the MediaBuffer. Pass in only the metadata |
| // The metadata passed consists of two parts: |
| // 1. First, there is an integer indicating that it is a GRAlloc |
| // source (kMetadataBufferTypeGrallocSource) |
| // 2. This is followed by the buffer_handle_t that is a handle to the |
| // GRalloc buffer. The encoder needs to interpret this GRalloc handle |
| // and encode the frames. |
| // -------------------------------------------------------------- |
| // | kMetadataBufferTypeGrallocSource | sizeof(buffer_handle_t) | |
| // -------------------------------------------------------------- |
| // Note: Call only when you have the lock |
| void SurfaceMediaSource::passMetadataBufferLocked(MediaBuffer **buffer) { |
| LOGV("passMetadataBuffer"); |
| // MediaBuffer allocates and owns this data |
| MediaBuffer *tempBuffer = |
| new MediaBuffer(4 + sizeof(buffer_handle_t)); |
| char *data = (char *)tempBuffer->data(); |
| if (data == NULL) { |
| LOGE("Cannot allocate memory for metadata buffer!"); |
| return; |
| } |
| OMX_U32 type = kMetadataBufferTypeGrallocSource; |
| memcpy(data, &type, 4); |
| memcpy(data + 4, &(mCurrentBuf->handle), sizeof(buffer_handle_t)); |
| *buffer = tempBuffer; |
| |
| LOGV("handle = %p, , offset = %d, length = %d", |
| mCurrentBuf->handle, (*buffer)->range_length(), (*buffer)->range_offset()); |
| } |
| |
| void SurfaceMediaSource::signalBufferReturned(MediaBuffer *buffer) { |
| LOGV("signalBufferReturned"); |
| |
| bool foundBuffer = false; |
| Mutex::Autolock autoLock(mMutex); |
| |
| if (mStopped) { |
| LOGV("signalBufferReturned: mStopped = true! Nothing to do!"); |
| return; |
| } |
| |
| for (int id = 0; id < NUM_BUFFER_SLOTS; id++) { |
| if (mSlots[id].mGraphicBuffer == NULL) { |
| continue; |
| } |
| if (checkBufferMatchesSlot(id, buffer)) { |
| LOGV("Slot %d returned, matches handle = %p", id, |
| mSlots[id].mGraphicBuffer->handle); |
| mSlots[id].mBufferState = BufferSlot::FREE; |
| buffer->setObserver(0); |
| buffer->release(); |
| mDequeueCondition.signal(); |
| mFrameCompleteCondition.signal(); |
| foundBuffer = true; |
| break; |
| } |
| } |
| |
| if (!foundBuffer) { |
| CHECK_EQ(0, "signalBufferReturned: bogus buffer"); |
| } |
| } |
| |
| bool SurfaceMediaSource::checkBufferMatchesSlot(int slot, MediaBuffer *buffer) { |
| LOGV("Check if Buffer matches slot"); |
| // need to convert to char* for pointer arithmetic and then |
| // copy the byte stream into our handle |
| buffer_handle_t bufferHandle ; |
| memcpy( &bufferHandle, (char *)(buffer->data()) + 4, sizeof(buffer_handle_t)); |
| return mSlots[slot].mGraphicBuffer->handle == bufferHandle; |
| } |
| |
| } // end of namespace android |