| /** |
| * |
| * File Name: omxVCM4P2_DecodeBlockCoef_Intra.c |
| * OpenMAX DL: v1.0.2 |
| * Revision: 12290 |
| * Date: Wednesday, April 9, 2008 |
| * |
| * (c) Copyright 2007-2008 ARM Limited. All Rights Reserved. |
| * |
| * |
| * |
| * Description: |
| * Contains modules for intra reconstruction |
| * |
| */ |
| |
| #include "omxtypes.h" |
| #include "armOMX.h" |
| #include "omxVC.h" |
| |
| #include "armCOMM.h" |
| #include "armVC.h" |
| |
| /* Function for saturating 16 bit values to the [0,255] range and */ |
| /* writing out as 8 bit values. Does 64 entries */ |
| void armVCM4P2_Clip8(OMX_S16 *pSrc, OMX_U8 *pDst, OMX_INT dstStep ); |
| |
| |
| |
| /** |
| * Function: omxVCM4P2_DecodeBlockCoef_Intra |
| * |
| * Description: |
| * Decodes the INTRA block coefficients. Inverse quantization, inversely zigzag |
| * positioning, and IDCT, with appropriate clipping on each step, are performed |
| * on the coefficients. The results are then placed in the output frame/plane on |
| * a pixel basis. For INTRA block, the output values are clipped to [0, 255] and |
| * written to corresponding block buffer within the destination plane. |
| * |
| * Remarks: |
| * |
| * Parameters: |
| * [in] ppBitStream pointer to the pointer to the current byte in |
| * the bit stream buffer. There is no boundary |
| * check for the bit stream buffer. |
| * [in] pBitOffset pointer to the bit position in the byte pointed |
| * to by *ppBitStream. *pBitOffset is valid within |
| * [0-7]. |
| * [in] step width of the destination plane |
| * [in/out] pCoefBufRow [in] pointer to the coefficient row buffer |
| * [out] updated coefficient rwo buffer |
| * [in/out] pCoefBufCol [in] pointer to the coefficient column buffer |
| * [out] updated coefficient column buffer |
| * [in] curQP quantization parameter of the macroblock which |
| * the current block belongs to |
| * [in] pQpBuf Pointer to a 2-element QP array. pQpBuf[0] holds the QP of the 8x8 block left to |
| * the current block(QPa). pQpBuf[1] holds the QP of the 8x8 block just above the |
| * current block(QPc). |
| * Note, in case the corresponding block is out of VOP bound, the QP value will have |
| * no effect to the intra-prediction process. Refer to subclause "7.4.3.3 Adaptive |
| * ac coefficient prediction" of ISO/IEC 14496-2(MPEG4 Part2) for accurate description. |
| * [in] blockIndex block index indicating the component type and |
| * position as defined in subclause 6.1.3.8, |
| * Figure 6-5 of ISO/IEC 14496-2. |
| * [in] intraDCVLC a code determined by intra_dc_vlc_thr and QP. |
| * This allows a mechanism to switch between two VLC |
| * for coding of Intra DC coefficients as per Table |
| * 6-21 of ISO/IEC 14496-2. |
| * [in] ACPredFlag a flag equal to ac_pred_flag (of luminance) indicating |
| * if the ac coefficients of the first row or first |
| * column are differentially coded for intra coded |
| * macroblock. |
| * [in] shortVideoHeader a flag indicating presence of short_video_header; |
| * shortVideoHeader==1 selects linear intra DC mode, |
| * and shortVideoHeader==0 selects nonlinear intra DC mode. |
| * [out] ppBitStream *ppBitStream is updated after the block is |
| * decoded, so that it points to the current byte |
| * in the bit stream buffer |
| * [out] pBitOffset *pBitOffset is updated so that it points to the |
| * current bit position in the byte pointed by |
| * *ppBitStream |
| * [out] pDst pointer to the block in the destination plane. |
| * pDst should be 16-byte aligned. |
| * [out] pCoefBufRow pointer to the updated coefficient row buffer. |
| * |
| * Return Value: |
| * OMX_Sts_NoErr - no error |
| * OMX_Sts_BadArgErr - bad arguments |
| * - At least one of the following pointers is NULL: ppBitStream, *ppBitStream, pBitOffset, |
| * pCoefBufRow, pCoefBufCol, pQPBuf, pDst. |
| * or |
| * - At least one of the below case: *pBitOffset exceeds [0,7], curQP exceeds (1, 31), |
| * blockIndex exceeds [0,9], step is not the multiple of 8, intraDCVLC is zero while |
| * blockIndex greater than 5. |
| * or |
| * - pDst is not 16-byte aligned |
| * OMX_Sts_Err - status error |
| * |
| */ |
| |
| OMXResult omxVCM4P2_DecodeBlockCoef_Intra( |
| const OMX_U8 ** ppBitStream, |
| OMX_INT *pBitOffset, |
| OMX_U8 *pDst, |
| OMX_INT step, |
| OMX_S16 *pCoefBufRow, |
| OMX_S16 *pCoefBufCol, |
| OMX_U8 curQP, |
| const OMX_U8 *pQPBuf, |
| OMX_INT blockIndex, |
| OMX_INT intraDCVLC, |
| OMX_INT ACPredFlag, |
| OMX_INT shortVideoHeader |
| ) |
| { |
| OMX_S16 tempBuf1[79], tempBuf2[79]; |
| OMX_S16 *pTempBuf1, *pTempBuf2; |
| OMX_INT predDir, predACDir; |
| OMX_INT predQP; |
| OMXVCM4P2VideoComponent videoComp; |
| OMXResult errorCode; |
| |
| |
| /* Aligning the local buffers */ |
| pTempBuf1 = armAlignTo16Bytes(tempBuf1); |
| pTempBuf2 = armAlignTo16Bytes(tempBuf2); |
| |
| /* Setting the AC prediction direction and prediction direction */ |
| armVCM4P2_SetPredDir( |
| blockIndex, |
| pCoefBufRow, |
| pCoefBufCol, |
| &predDir, |
| &predQP, |
| pQPBuf); |
| |
| predACDir = predDir; |
| |
| |
| if (ACPredFlag == 0) |
| { |
| predACDir = OMX_VC_NONE; |
| } |
| |
| /* Setting the videoComp */ |
| if (blockIndex <= 3) |
| { |
| videoComp = OMX_VC_LUMINANCE; |
| } |
| else |
| { |
| videoComp = OMX_VC_CHROMINANCE; |
| } |
| |
| |
| /* VLD and zigzag */ |
| if (intraDCVLC == 1) |
| { |
| errorCode = omxVCM4P2_DecodeVLCZigzag_IntraDCVLC( |
| ppBitStream, |
| pBitOffset, |
| pTempBuf1, |
| predACDir, |
| shortVideoHeader, |
| videoComp); |
| armRetDataErrIf((errorCode != OMX_Sts_NoErr), errorCode); |
| } |
| else |
| { |
| errorCode = omxVCM4P2_DecodeVLCZigzag_IntraACVLC( |
| ppBitStream, |
| pBitOffset, |
| pTempBuf1, |
| predACDir, |
| shortVideoHeader); |
| armRetDataErrIf((errorCode != OMX_Sts_NoErr), errorCode); |
| } |
| |
| /* AC DC prediction */ |
| errorCode = omxVCM4P2_PredictReconCoefIntra( |
| pTempBuf1, |
| pCoefBufRow, |
| pCoefBufCol, |
| curQP, |
| predQP, |
| predDir, |
| ACPredFlag, |
| videoComp); |
| armRetDataErrIf((errorCode != OMX_Sts_NoErr), errorCode); |
| |
| /* Dequantization */ |
| errorCode = omxVCM4P2_QuantInvIntra_I( |
| pTempBuf1, |
| curQP, |
| videoComp, |
| shortVideoHeader); |
| armRetDataErrIf((errorCode != OMX_Sts_NoErr), errorCode); |
| |
| /* Inverse transform */ |
| errorCode = omxVCM4P2_IDCT8x8blk (pTempBuf1, pTempBuf2); |
| armRetDataErrIf((errorCode != OMX_Sts_NoErr), errorCode); |
| |
| /* Placing the linear array into the destination plane and clipping |
| it to 0 to 255 */ |
| |
| armVCM4P2_Clip8(pTempBuf2,pDst,step); |
| |
| |
| return OMX_Sts_NoErr; |
| } |
| |
| /* End of file */ |
| |
| |