| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_EFFECTAPI_H_ |
| #define ANDROID_EFFECTAPI_H_ |
| |
| #include <errno.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #if __cplusplus |
| extern "C" { |
| #endif |
| |
| ///////////////////////////////////////////////// |
| // Effect control interface |
| ///////////////////////////////////////////////// |
| |
| // The effect control interface is exposed by each effect engine implementation. It consists of |
| // a set of functions controlling the configuration, activation and process of the engine. |
| // The functions are grouped in a structure of type effect_interface_s: |
| // struct effect_interface_s { |
| // effect_process_t process; |
| // effect_command_t command; |
| // }; |
| |
| |
| // effect_interface_t: Effect control interface handle. |
| // The effect_interface_t serves two purposes regarding the implementation of the effect engine: |
| // - 1 it is the address of a pointer to an effect_interface_s structure where the functions |
| // of the effect control API for a particular effect are located. |
| // - 2 it is the address of the context of a particular effect instance. |
| // A typical implementation in the effect library would define a structure as follows: |
| // struct effect_module_s { |
| // const struct effect_interface_s *itfe; |
| // effect_config_t config; |
| // effect_context_t context; |
| // } |
| // The implementation of EffectCreate() function would then allocate a structure of this |
| // type and return its address as effect_interface_t |
| typedef struct effect_interface_s **effect_interface_t; |
| |
| |
| // Effect API version 1.0 |
| #define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version |
| |
| // Maximum length of character strings in structures defines by this API. |
| #define EFFECT_STRING_LEN_MAX 64 |
| |
| // |
| //--- Effect descriptor structure effect_descriptor_t |
| // |
| |
| // Unique effect ID (can be generated from the following site: |
| // http://www.itu.int/ITU-T/asn1/uuid.html) |
| // This format is used for both "type" and "uuid" fields of the effect descriptor structure. |
| // - When used for effect type and the engine is implementing and effect corresponding to a standard |
| // OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface. |
| // - When used as uuid, it should be a unique UUID for this particular implementation. |
| typedef struct effect_uuid_s { |
| uint32_t timeLow; |
| uint16_t timeMid; |
| uint16_t timeHiAndVersion; |
| uint16_t clockSeq; |
| uint8_t node[6]; |
| } effect_uuid_t; |
| |
| // NULL UUID definition (matches SL_IID_NULL_) |
| #define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \ |
| { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } } |
| static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER; |
| const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_; |
| const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210"; |
| |
| // The effect descriptor contains necessary information to facilitate the enumeration of the effect |
| // engines present in a library. |
| typedef struct effect_descriptor_s { |
| effect_uuid_t type; // UUID of to the OpenSL ES interface implemented by this effect |
| effect_uuid_t uuid; // UUID for this particular implementation |
| uint16_t apiVersion; // Version of the effect API implemented: matches EFFECT_API_VERSION |
| uint32_t flags; // effect engine capabilities/requirements flags (see below) |
| uint16_t cpuLoad; // CPU load indication (see below) |
| uint16_t memoryUsage; // Data Memory usage (see below) |
| char name[EFFECT_STRING_LEN_MAX]; // human readable effect name |
| char implementor[EFFECT_STRING_LEN_MAX]; // human readable effect implementor name |
| } effect_descriptor_t; |
| |
| // CPU load and memory usage indication: each effect implementation must provide an indication of |
| // its CPU and memory usage for the audio effect framework to limit the number of effects |
| // instantiated at a given time on a given platform. |
| // The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS. |
| // The memory usage is expressed in KB and includes only dynamically allocated memory |
| |
| // Definitions for flags field of effect descriptor. |
| // +---------------------------+-----------+----------------------------------- |
| // | description | bits | values |
| // +---------------------------+-----------+----------------------------------- |
| // | connection mode | 0..1 | 0 insert: after track process |
| // | | | 1 auxiliary: connect to track auxiliary |
| // | | | output and use send level |
| // | | | 2 replace: replaces track process function; |
| // | | | must implement SRC, volume and mono to stereo. |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | insertion preference | 2..4 | 0 none |
| // | | | 1 first of the chain |
| // | | | 2 last of the chain |
| // | | | 3 exclusive (only effect in the insert chain) |
| // | | | 4..7 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Volume management | 5..6 | 0 none |
| // | | | 1 implements volume control |
| // | | | 2 requires volume indication |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Device indication | 7..8 | 0 none |
| // | | | 1 requires device updates |
| // | | | 2..3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Sample input mode | 9..10 | 0 direct: process() function or EFFECT_CMD_CONFIGURE |
| // | | | command must specify a buffer descriptor |
| // | | | 1 provider: process() function uses the |
| // | | | bufferProvider indicated by the |
| // | | | EFFECT_CMD_CONFIGURE command to request input. |
| // | | | buffers. |
| // | | | 2 both: both input modes are supported |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Sample output mode | 11..12 | 0 direct: process() function or EFFECT_CMD_CONFIGURE |
| // | | | command must specify a buffer descriptor |
| // | | | 1 provider: process() function uses the |
| // | | | bufferProvider indicated by the |
| // | | | EFFECT_CMD_CONFIGURE command to request output |
| // | | | buffers. |
| // | | | 2 both: both output modes are supported |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Hardware acceleration | 13..15 | 0 No hardware acceleration |
| // | | | 1 non tunneled hw acceleration: the process() function |
| // | | | reads the samples, send them to HW accelerated |
| // | | | effect processor, reads back the processed samples |
| // | | | and returns them to the output buffer. |
| // | | | 2 tunneled hw acceleration: the process() function is |
| // | | | transparent. The effect interface is only used to |
| // | | | control the effect engine. This mode is relevant for |
| // | | | global effects actually applied by the audio |
| // | | | hardware on the output stream. |
| // +---------------------------+-----------+----------------------------------- |
| // | Audio Mode indication | 16..17 | 0 none |
| // | | | 1 requires audio mode updates |
| // | | | 2..3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| |
| // Insert mode |
| #define EFFECT_FLAG_TYPE_MASK 0x00000003 |
| #define EFFECT_FLAG_TYPE_INSERT 0x00000000 |
| #define EFFECT_FLAG_TYPE_AUXILIARY 0x00000001 |
| #define EFFECT_FLAG_TYPE_REPLACE 0x00000002 |
| |
| // Insert preference |
| #define EFFECT_FLAG_INSERT_MASK 0x0000001C |
| #define EFFECT_FLAG_INSERT_ANY 0x00000000 |
| #define EFFECT_FLAG_INSERT_FIRST 0x00000004 |
| #define EFFECT_FLAG_INSERT_LAST 0x00000008 |
| #define EFFECT_FLAG_INSERT_EXCLUSIVE 0x0000000C |
| |
| |
| // Volume control |
| #define EFFECT_FLAG_VOLUME_MASK 0x00000060 |
| #define EFFECT_FLAG_VOLUME_CTRL 0x00000020 |
| #define EFFECT_FLAG_VOLUME_IND 0x00000040 |
| #define EFFECT_FLAG_VOLUME_NONE 0x00000000 |
| |
| // Device indication |
| #define EFFECT_FLAG_DEVICE_MASK 0x00000180 |
| #define EFFECT_FLAG_DEVICE_IND 0x00000080 |
| #define EFFECT_FLAG_DEVICE_NONE 0x00000000 |
| |
| // Sample input modes |
| #define EFFECT_FLAG_INPUT_MASK 0x00000600 |
| #define EFFECT_FLAG_INPUT_DIRECT 0x00000000 |
| #define EFFECT_FLAG_INPUT_PROVIDER 0x00000200 |
| #define EFFECT_FLAG_INPUT_BOTH 0x00000400 |
| |
| // Sample output modes |
| #define EFFECT_FLAG_OUTPUT_MASK 0x00001800 |
| #define EFFECT_FLAG_OUTPUT_DIRECT 0x00000000 |
| #define EFFECT_FLAG_OUTPUT_PROVIDER 0x00000800 |
| #define EFFECT_FLAG_OUTPUT_BOTH 0x00001000 |
| |
| // Hardware acceleration mode |
| #define EFFECT_FLAG_HW_ACC_MASK 0x00006000 |
| #define EFFECT_FLAG_HW_ACC_SIMPLE 0x00002000 |
| #define EFFECT_FLAG_HW_ACC_TUNNEL 0x00004000 |
| |
| // Audio mode indication |
| #define EFFECT_FLAG_AUDIO_MODE_MASK 0x00018000 |
| #define EFFECT_FLAG_AUDIO_MODE_IND 0x00008000 |
| #define EFFECT_FLAG_AUDIO_MODE_NONE 0x00000000 |
| |
| // Forward definition of type audio_buffer_t |
| typedef struct audio_buffer_s audio_buffer_t; |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: process |
| // |
| // Description: Effect process function. Takes input samples as specified |
| // (count and location) in input buffer descriptor and output processed |
| // samples as specified in output buffer descriptor. If the buffer descriptor |
| // is not specified the function must use either the buffer or the |
| // buffer provider function installed by the EFFECT_CMD_CONFIGURE command. |
| // The effect framework will call the process() function after the EFFECT_CMD_ENABLE |
| // command is received and until the EFFECT_CMD_DISABLE is received. When the engine |
| // receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully |
| // and when done indicate that it is OK to stop calling the process() function by |
| // returning the -ENODATA status. |
| // |
| // NOTE: the process() function implementation should be "real-time safe" that is |
| // it should not perform blocking calls: malloc/free, sleep, read/write/open/close, |
| // pthread_cond_wait/pthread_mutex_lock... |
| // |
| // Input: |
| // effect_interface_t: handle to the effect interface this function |
| // is called on. |
| // inBuffer: buffer descriptor indicating where to read samples to process. |
| // If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. |
| // |
| // inBuffer: buffer descriptor indicating where to write processed samples. |
| // If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. |
| // |
| // Output: |
| // returned value: 0 successful operation |
| // -ENODATA the engine has finished the disable phase and the framework |
| // can stop calling process() |
| // -EINVAL invalid interface handle or |
| // invalid input/output buffer description |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_process_t)(effect_interface_t self, |
| audio_buffer_t *inBuffer, |
| audio_buffer_t *outBuffer); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: command |
| // |
| // Description: Send a command and receive a response to/from effect engine. |
| // |
| // Input: |
| // effect_interface_t: handle to the effect interface this function |
| // is called on. |
| // cmdCode: command code: the command can be a standardized command defined in |
| // effect_command_e (see below) or a proprietary command. |
| // cmdSize: size of command in bytes |
| // pCmdData: pointer to command data |
| // pReplyData: pointer to reply data |
| // |
| // Input/Output: |
| // replySize: maximum size of reply data as input |
| // actual size of reply data as output |
| // |
| // Output: |
| // returned value: 0 successful operation |
| // -EINVAL invalid interface handle or |
| // invalid command/reply size or format according to command code |
| // The return code should be restricted to indicate problems related to the this |
| // API specification. Status related to the execution of a particular command should be |
| // indicated as part of the reply field. |
| // |
| // *pReplyData updated with command response |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_command_t)(effect_interface_t self, |
| uint32_t cmdCode, |
| uint32_t cmdSize, |
| void *pCmdData, |
| uint32_t *replySize, |
| void *pReplyData); |
| |
| |
| // Effect control interface definition |
| struct effect_interface_s { |
| effect_process_t process; |
| effect_command_t command; |
| }; |
| |
| |
| // |
| //--- Standardized command codes for command() function |
| // |
| enum effect_command_e { |
| EFFECT_CMD_INIT, // initialize effect engine |
| EFFECT_CMD_CONFIGURE, // configure effect engine (see effect_config_t) |
| EFFECT_CMD_RESET, // reset effect engine |
| EFFECT_CMD_ENABLE, // enable effect process |
| EFFECT_CMD_DISABLE, // disable effect process |
| EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t) |
| EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred |
| EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred |
| EFFECT_CMD_GET_PARAM, // get parameter |
| EFFECT_CMD_SET_DEVICE, // set audio device (see audio_device_e) |
| EFFECT_CMD_SET_VOLUME, // set volume |
| EFFECT_CMD_SET_AUDIO_MODE, // set the audio mode (normal, ring, ...) |
| EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code |
| }; |
| |
| //================================================================================================== |
| // command: EFFECT_CMD_INIT |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Initialize effect engine: All configurations return to default |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: 0 |
| // data: N/A |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_CONFIGURE |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Apply new audio parameters configurations for input and output buffers |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(effect_config_t) |
| // data: effect_config_t |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_RESET |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Reset the effect engine. Keep configuration but resets state and buffer content |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: 0 |
| // data: N/A |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: 0 |
| // data: N/A |
| //================================================================================================== |
| // command: EFFECT_CMD_ENABLE |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Enable the process. Called by the framework before the first call to process() |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: 0 |
| // data: N/A |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_DISABLE |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Disable the process. Called by the framework after the last call to process() |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: 0 |
| // data: N/A |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_PARAM |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Set a parameter and apply it immediately |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(effect_param_t) + size of param and value |
| // data: effect_param_t + param + value. See effect_param_t definition below for value offset |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_PARAM_DEFERRED |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(effect_param_t) + size of param and value |
| // data: effect_param_t + param + value. See effect_param_t definition below for value offset |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: 0 |
| // data: N/A |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_PARAM_COMMIT |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: 0 |
| // data: N/A |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(int) |
| // data: status |
| //================================================================================================== |
| // command: EFFECT_CMD_GET_PARAM |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Get a parameter value |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(effect_param_t) + size of param |
| // data: effect_param_t + param |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: sizeof(effect_param_t) + size of param and value |
| // data: effect_param_t + param + value. See effect_param_t definition below for value offset |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_DEVICE |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Set the rendering device the audio output path is connected to. See audio_device_e for device |
| // values. |
| // The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this |
| // command when the device changes |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(uint32_t) |
| // data: audio_device_e |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: 0 |
| // data: N/A |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_VOLUME |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Set and get volume. Used by audio framework to delegate volume control to effect engine. |
| // The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in |
| // its descriptor to receive this command before every call to process() function |
| // If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return |
| // the volume that should be applied before the effect is processed. The overall volume (the volume |
| // actually applied by the effect engine multiplied by the returned value) should match the value |
| // indicated in the command. |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: n * sizeof(uint32_t) |
| // data: volume for each channel defined in effect_config_t for output buffer expressed in |
| // 8.24 fixed point format |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: n * sizeof(uint32_t) / 0 |
| // data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor: |
| // volume for each channel defined in effect_config_t for output buffer expressed in |
| // 8.24 fixed point format |
| // - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor: |
| // N/A |
| // It is legal to receive a null pointer as pReplyData in which case the effect framework has |
| // delegated volume control to another effect |
| //================================================================================================== |
| // command: EFFECT_CMD_SET_AUDIO_MODE |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its |
| // descriptor to receive this command when the audio mode changes. |
| //-------------------------------------------------------------------------------------------------- |
| // command format: |
| // size: sizeof(uint32_t) |
| // data: audio_mode_e |
| //-------------------------------------------------------------------------------------------------- |
| // reply format: |
| // size: 0 |
| // data: N/A |
| //================================================================================================== |
| // command: EFFECT_CMD_FIRST_PROPRIETARY |
| //-------------------------------------------------------------------------------------------------- |
| // description: |
| // All proprietary effect commands must use command codes above this value. The size and format of |
| // command and response fields is free in this case |
| //================================================================================================== |
| |
| |
| // Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t |
| // structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with |
| // regard to the channel mask definition in audio_channels_e e.g : |
| // Stereo: left, right |
| // 5 point 1: front left, front right, front center, low frequency, back left, back right |
| // The buffer size is expressed in frame count, a frame being composed of samples for all |
| // channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by |
| // definition |
| struct audio_buffer_s { |
| size_t frameCount; // number of frames in buffer |
| union { |
| void* raw; // raw pointer to start of buffer |
| int32_t* s32; // pointer to signed 32 bit data at start of buffer |
| int16_t* s16; // pointer to signed 16 bit data at start of buffer |
| uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer |
| }; |
| }; |
| |
| // The buffer_provider_s structure contains functions that can be used |
| // by the effect engine process() function to query and release input |
| // or output audio buffer. |
| // The getBuffer() function is called to retrieve a buffer where data |
| // should read from or written to by process() function. |
| // The releaseBuffer() function MUST be called when the buffer retrieved |
| // with getBuffer() is not needed anymore. |
| // The process function should use the buffer provider mechanism to retrieve |
| // input or output buffer if the inBuffer or outBuffer passed as argument is NULL |
| // and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE |
| // command did not specify an audio buffer. |
| |
| typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer); |
| |
| typedef struct buffer_provider_s { |
| buffer_function_t getBuffer; // retrieve next buffer |
| buffer_function_t releaseBuffer; // release used buffer |
| void *cookie; // for use by client of buffer provider functions |
| } buffer_provider_t; |
| |
| |
| // The buffer_config_s structure specifies the input or output audio format |
| // to be used by the effect engine. It is part of the effect_config_t |
| // structure that defines both input and output buffer configurations and is |
| // passed by the EFFECT_CMD_CONFIGURE command. |
| typedef struct buffer_config_s { |
| audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly |
| uint32_t samplingRate; // sampling rate |
| uint32_t channels; // channel mask (see audio_channels_e) |
| buffer_provider_t bufferProvider; // buffer provider |
| uint8_t format; // Audio format (see audio_format_e) |
| uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e) |
| uint16_t mask; // indicates which of the above fields is valid |
| } buffer_config_t; |
| |
| // Sample format |
| enum audio_format_e { |
| SAMPLE_FORMAT_PCM_S15, // PCM signed 16 bits |
| SAMPLE_FORMAT_PCM_U8, // PCM unsigned 8 bits |
| SAMPLE_FORMAT_PCM_S7_24, // PCM signed 7.24 fixed point representation |
| SAMPLE_FORMAT_OTHER // other format (e.g. compressed) |
| }; |
| |
| // Channel mask |
| enum audio_channels_e { |
| CHANNEL_FRONT_LEFT = 0x1, // front left channel |
| CHANNEL_FRONT_RIGHT = 0x2, // front right channel |
| CHANNEL_FRONT_CENTER = 0x4, // front center channel |
| CHANNEL_LOW_FREQUENCY = 0x8, // low frequency channel |
| CHANNEL_BACK_LEFT = 0x10, // back left channel |
| CHANNEL_BACK_RIGHT = 0x20, // back right channel |
| CHANNEL_FRONT_LEFT_OF_CENTER = 0x40, // front left of center channel |
| CHANNEL_FRONT_RIGHT_OF_CENTER = 0x80, // front right of center channel |
| CHANNEL_BACK_CENTER = 0x100, // back center channel |
| CHANNEL_MONO = CHANNEL_FRONT_LEFT, |
| CHANNEL_STEREO = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT), |
| CHANNEL_QUAD = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | |
| CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), |
| CHANNEL_SURROUND = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | |
| CHANNEL_FRONT_CENTER | CHANNEL_BACK_CENTER), |
| CHANNEL_5POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | |
| CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), |
| CHANNEL_7POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | |
| CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT | |
| CHANNEL_FRONT_LEFT_OF_CENTER | CHANNEL_FRONT_RIGHT_OF_CENTER), |
| }; |
| |
| // Render device |
| enum audio_device_e { |
| DEVICE_EARPIECE = 0x1, // earpiece |
| DEVICE_SPEAKER = 0x2, // speaker |
| DEVICE_WIRED_HEADSET = 0x4, // wired headset, with microphone |
| DEVICE_WIRED_HEADPHONE = 0x8, // wired headphone, without microphone |
| DEVICE_BLUETOOTH_SCO = 0x10, // generic bluetooth SCO |
| DEVICE_BLUETOOTH_SCO_HEADSET = 0x20, // bluetooth SCO headset |
| DEVICE_BLUETOOTH_SCO_CARKIT = 0x40, // bluetooth SCO car kit |
| DEVICE_BLUETOOTH_A2DP = 0x80, // generic bluetooth A2DP |
| DEVICE_BLUETOOTH_A2DP_HEADPHONES = 0x100, // bluetooth A2DP headphones |
| DEVICE_BLUETOOTH_A2DP_SPEAKER = 0x200, // bluetooth A2DP speakers |
| DEVICE_AUX_DIGITAL = 0x400, // digital output |
| DEVICE_EXTERNAL_SPEAKER = 0x800 // external speaker (stereo and High quality) |
| }; |
| |
| // Audio mode |
| enum audio_mode_e { |
| AUDIO_MODE_NORMAL, // phone idle |
| AUDIO_MODE_RINGTONE, // phone ringing |
| AUDIO_MODE_IN_CALL // phone call connected |
| }; |
| |
| // Values for "accessMode" field of buffer_config_t: |
| // overwrite, read only, accumulate (read/modify/write) |
| enum effect_buffer_access_e { |
| EFFECT_BUFFER_ACCESS_WRITE, |
| EFFECT_BUFFER_ACCESS_READ, |
| EFFECT_BUFFER_ACCESS_ACCUMULATE |
| |
| }; |
| |
| // Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field |
| // in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command |
| #define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account |
| #define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account |
| #define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account |
| #define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account |
| #define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account |
| #define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account |
| #define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \ |
| EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \ |
| EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER) |
| |
| |
| // effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE |
| // command to configure audio parameters and buffers for effect engine input and output. |
| typedef struct effect_config_s { |
| buffer_config_t inputCfg; |
| buffer_config_t outputCfg;; |
| } effect_config_t; |
| |
| |
| // effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM |
| // command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command. |
| // psize and vsize represent the actual size of parameter and value. |
| // |
| // NOTE: the start of value field inside the data field is always on a 32 bit boundary: |
| // |
| // +-----------+ |
| // | status | sizeof(int) |
| // +-----------+ |
| // | psize | sizeof(int) |
| // +-----------+ |
| // | vsize | sizeof(int) |
| // +-----------+ |
| // | | | | |
| // ~ parameter ~ > psize | |
| // | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int) |
| // +-----------+ | |
| // | padding | | |
| // +-----------+ |
| // | | | |
| // ~ value ~ > vsize |
| // | | | |
| // +-----------+ |
| |
| typedef struct effect_param_s { |
| int32_t status; // Transaction status (unused for command, used for reply) |
| uint32_t psize; // Parameter size |
| uint32_t vsize; // Value size |
| char data[]; // Start of Parameter + Value data |
| } effect_param_t; |
| |
| |
| ///////////////////////////////////////////////// |
| // Effect library interface |
| ///////////////////////////////////////////////// |
| |
| // An effect library is required to implement and expose the following functions |
| // to enable effect enumeration and instantiation. The name of these functions must be as |
| // specified here as the effect framework will get the function address with dlsym(): |
| // |
| // - effect_QueryNumberEffects_t EffectQueryNumberEffects; |
| // - effect_QueryEffect_t EffectQueryEffect; |
| // - effect_CreateEffect_t EffectCreate; |
| // - effect_ReleaseEffect_t EffectRelease; |
| |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectQueryNumberEffects |
| // |
| // Description: Returns the number of different effects exposed by the |
| // library. Each effect must have a unique effect uuid (see |
| // effect_descriptor_t). This function together with EffectQueryEffect() |
| // is used to enumerate all effects present in the library. |
| // |
| // Input/Output: |
| // pNumEffects: address where the number of effects should be returned. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pNumEffects |
| // *pNumEffects: updated with number of effects in library |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectQueryEffect |
| // |
| // Description: Returns the descriptor of the effect engine which index is |
| // given as first argument. |
| // See effect_descriptor_t for details on effect descriptors. |
| // This function together with EffectQueryNumberEffects() is used to enumerate all |
| // effects present in the library. The enumeration sequence is: |
| // EffectQueryNumberEffects(&num_effects); |
| // for (i = 0; i < num_effects; i++) |
| // EffectQueryEffect(i,...); |
| // |
| // Input/Output: |
| // index: index of the effect |
| // pDescriptor: address where to return the effect descriptor. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pDescriptor or index |
| // -ENOSYS effect list has changed since last execution of |
| // EffectQueryNumberEffects() |
| // -ENOENT no more effect available |
| // *pDescriptor: updated with the effect descriptor. |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_QueryEffect_t)(uint32_t index, |
| effect_descriptor_t *pDescriptor); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectCreate |
| // |
| // Description: Creates an effect engine of the specified type and returns an |
| // effect control interface on this engine. The function will allocate the |
| // resources for an instance of the requested effect engine and return |
| // a handle on the effect control interface. |
| // |
| // Input: |
| // uuid: pointer to the effect uuid. |
| // sessionId: audio session to which this effect instance will be attached. All effects |
| // created with the same session ID are connected in series and process the same signal |
| // stream. Knowing that two effects are part of the same effect chain can help the |
| // library implement some kind of optimizations. |
| // ioId: identifies the output or input stream this effect is directed to at audio HAL. |
| // For future use especially with tunneled HW accelerated effects |
| // |
| // Input/Output: |
| // pInterface: address where to return the effect interface. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pEffectUuid or pInterface |
| // -ENOENT no effect with this uuid found |
| // *pInterface: updated with the effect interface handle. |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid, |
| int32_t sessionId, |
| int32_t ioId, |
| effect_interface_t *pInterface); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectRelease |
| // |
| // Description: Releases the effect engine whose handle is given as argument. |
| // All resources allocated to this particular instance of the effect are |
| // released. |
| // |
| // Input: |
| // interface: handle on the effect interface to be released. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid interface handle |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface); |
| |
| |
| #if __cplusplus |
| } // extern "C" |
| #endif |
| |
| |
| #endif /*ANDROID_EFFECTAPI_H_*/ |