blob: e7a79372a039add619eabd0c24b97065ea9b0017 [file] [log] [blame]
The Android Open Source Project5738f832012-12-12 16:00:35 -08001/******************************************************************************
2 *
3 * Copyright (C) 1999-2012 Broadcom Corporation
4 *
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at:
8 *
9 * http://www.apache.org/licenses/LICENSE-2.0
10 *
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
16 *
17 ******************************************************************************/
18
19#ifndef BT_TYPES_H
20#define BT_TYPES_H
21
22#include "data_types.h"
23
24#ifdef _WIN32
25#ifdef BLUESTACK_TESTER
26 #include "bte_stack_entry.h"
27#endif
28#endif
29
30/* READ WELL !!
31**
32** This section defines global events. These are events that cross layers.
33** Any event that passes between layers MUST be one of these events. Tasks
34** can use their own events internally, but a FUNDAMENTAL design issue is
35** that global events MUST be one of these events defined below.
36**
37** The convention used is the the event name contains the layer that the
38** event is going to.
39*/
40#define BT_EVT_MASK 0xFF00
41#define BT_SUB_EVT_MASK 0x00FF
42 /* To Bluetooth Upper Layers */
43 /************************************/
44#define BT_EVT_TO_BTU_L2C_EVT 0x0900 /* L2CAP event */
45#define BT_EVT_TO_BTU_HCI_EVT 0x1000 /* HCI Event */
46#define BT_EVT_TO_BTU_HCI_BR_EDR_EVT (0x0000 | BT_EVT_TO_BTU_HCI_EVT) /* event from BR/EDR controller */
47#define BT_EVT_TO_BTU_HCI_AMP1_EVT (0x0001 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 1 controller */
48#define BT_EVT_TO_BTU_HCI_AMP2_EVT (0x0002 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 2 controller */
49#define BT_EVT_TO_BTU_HCI_AMP3_EVT (0x0003 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 3 controller */
50
51#define BT_EVT_TO_BTU_HCI_ACL 0x1100 /* ACL Data from HCI */
52#define BT_EVT_TO_BTU_HCI_SCO 0x1200 /* SCO Data from HCI */
53#define BT_EVT_TO_BTU_HCIT_ERR 0x1300 /* HCI Transport Error */
54
55#define BT_EVT_TO_BTU_SP_EVT 0x1400 /* Serial Port Event */
56#define BT_EVT_TO_BTU_SP_DATA 0x1500 /* Serial Port Data */
57
58#define BT_EVT_TO_BTU_HCI_CMD 0x1600 /* HCI command from upper layer */
59
60
61#define BT_EVT_TO_BTU_L2C_SEG_XMIT 0x1900 /* L2CAP segment(s) transmitted */
62
63#define BT_EVT_PROXY_INCOMING_MSG 0x1A00 /* BlueStackTester event: incoming message from target */
64
65#define BT_EVT_BTSIM 0x1B00 /* Insight BTSIM event */
66#define BT_EVT_BTISE 0x1C00 /* Insight Script Engine event */
67
68 /* To LM */
69 /************************************/
70#define BT_EVT_TO_LM_HCI_CMD 0x2000 /* HCI Command */
71#define BT_EVT_TO_LM_HCI_ACL 0x2100 /* HCI ACL Data */
72#define BT_EVT_TO_LM_HCI_SCO 0x2200 /* HCI SCO Data */
73#define BT_EVT_TO_LM_HCIT_ERR 0x2300 /* HCI Transport Error */
74#define BT_EVT_TO_LM_LC_EVT 0x2400 /* LC event */
75#define BT_EVT_TO_LM_LC_LMP 0x2500 /* LC Received LMP command frame */
76#define BT_EVT_TO_LM_LC_ACL 0x2600 /* LC Received ACL data */
77#define BT_EVT_TO_LM_LC_SCO 0x2700 /* LC Received SCO data (not used) */
78#define BT_EVT_TO_LM_LC_ACL_TX 0x2800 /* LMP data transmit complete */
79#define BT_EVT_TO_LM_LC_LMPC_TX 0x2900 /* LMP Command transmit complete */
80#define BT_EVT_TO_LM_LOCAL_ACL_LB 0x2a00 /* Data to be locally loopbacked */
81#define BT_EVT_TO_LM_HCI_ACL_ACK 0x2b00 /* HCI ACL Data ack (not used) */
82#define BT_EVT_TO_LM_DIAG 0x2c00 /* LM Diagnostics commands */
83
84
85#define BT_EVT_TO_BTM_CMDS 0x2f00
86#define BT_EVT_TO_BTM_PM_MDCHG_EVT (0x0001 | BT_EVT_TO_BTM_CMDS)
87
88#define BT_EVT_TO_TCS_CMDS 0x3000
89
90#define BT_EVT_TO_OBX_CL_MSG 0x3100
91#define BT_EVT_TO_OBX_SR_MSG 0x3200
92
93#define BT_EVT_TO_CTP_CMDS 0x3300
94
95/* Obex Over L2CAP */
96#define BT_EVT_TO_OBX_CL_L2C_MSG 0x3400
97#define BT_EVT_TO_OBX_SR_L2C_MSG 0x3500
98
99/* ftp events */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800100#define BT_EVT_TO_FTP_SRVR_CMDS 0x3600
101#define BT_EVT_TO_FTP_CLNT_CMDS 0x3700
The Android Open Source Project5738f832012-12-12 16:00:35 -0800102
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800103#define BT_EVT_TO_BTU_SAP 0x3800 /* SIM Access Profile events */
The Android Open Source Project5738f832012-12-12 16:00:35 -0800104
105/* opp events */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800106#define BT_EVT_TO_OPP_SRVR_CMDS 0x3900
107#define BT_EVT_TO_OPP_CLNT_CMDS 0x3a00
The Android Open Source Project5738f832012-12-12 16:00:35 -0800108
109/* gap events */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800110#define BT_EVT_TO_GAP_MSG 0x3b00
The Android Open Source Project5738f832012-12-12 16:00:35 -0800111
112/* start timer */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800113#define BT_EVT_TO_START_TIMER 0x3c00
114
115/* stop timer */
116#define BT_EVT_TO_STOP_TIMER 0x3d00
The Android Open Source Project5738f832012-12-12 16:00:35 -0800117
118/* start quick timer */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800119#define BT_EVT_TO_START_QUICK_TIMER 0x3e00
The Android Open Source Project5738f832012-12-12 16:00:35 -0800120
121
122/* for NFC */
123 /************************************/
124#define BT_EVT_TO_NFC_NCI 0x4000 /* NCI Command, Notification or Data*/
125#define BT_EVT_TO_NFC_INIT 0x4100 /* Initialization message */
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800126#define BT_EVT_TO_NCI_LP 0x4200 /* Low power */
127#define BT_EVT_TO_NFC_ERR 0x4300 /* Error notification to NFC Task */
The Android Open Source Project5738f832012-12-12 16:00:35 -0800128
129#define BT_EVT_TO_NFCCSIM_NCI 0x4a00 /* events to NFCC simulation (NCI packets) */
130
131/* HCISU Events */
132
133#define BT_EVT_HCISU 0x5000
134
135// btla-specific ++
136#define BT_EVT_TO_HCISU_RECONFIG_EVT (0x0001 | BT_EVT_HCISU)
137#define BT_EVT_TO_HCISU_UPDATE_BAUDRATE_EVT (0x0002 | BT_EVT_HCISU)
138#define BT_EVT_TO_HCISU_LP_ENABLE_EVT (0x0003 | BT_EVT_HCISU)
139#define BT_EVT_TO_HCISU_LP_DISABLE_EVT (0x0004 | BT_EVT_HCISU)
140// btla-specific --
141#define BT_EVT_TO_HCISU_LP_APP_SLEEPING_EVT (0x0005 | BT_EVT_HCISU)
142#define BT_EVT_TO_HCISU_LP_ALLOW_BT_SLEEP_EVT (0x0006 | BT_EVT_HCISU)
143#define BT_EVT_TO_HCISU_LP_WAKEUP_HOST_EVT (0x0007 | BT_EVT_HCISU)
144#define BT_EVT_TO_HCISU_LP_RCV_H4IBSS_EVT (0x0008 | BT_EVT_HCISU)
145#define BT_EVT_TO_HCISU_H5_RESET_EVT (0x0009 | BT_EVT_HCISU)
146#define BT_EVT_HCISU_START_QUICK_TIMER (0x000a | BT_EVT_HCISU)
147
148#define BT_EVT_DATA_TO_AMP_1 0x5100
149#define BT_EVT_DATA_TO_AMP_15 0x5f00
150
151/* HSP Events */
152
153#define BT_EVT_BTU_HSP2 0x6000
154
155#define BT_EVT_TO_BTU_HSP2_EVT (0x0001 | BT_EVT_BTU_HSP2)
156
157/* BPP Events */
158#define BT_EVT_TO_BPP_PR_CMDS 0x6100 /* Printer Events */
159#define BT_EVT_TO_BPP_SND_CMDS 0x6200 /* BPP Sender Events */
160
161/* BIP Events */
162#define BT_EVT_TO_BIP_CMDS 0x6300
163
164/* HCRP Events */
165
166#define BT_EVT_BTU_HCRP 0x7000
167
168#define BT_EVT_TO_BTU_HCRP_EVT (0x0001 | BT_EVT_BTU_HCRP)
169#define BT_EVT_TO_BTU_HCRPM_EVT (0x0002 | BT_EVT_BTU_HCRP)
170
171
172#define BT_EVT_BTU_HFP 0x8000
173#define BT_EVT_TO_BTU_HFP_EVT (0x0001 | BT_EVT_BTU_HFP)
174
175#define BT_EVT_BTU_IPC_EVT 0x9000
176#define BT_EVT_BTU_IPC_LOGMSG_EVT (0x0000 | BT_EVT_BTU_IPC_EVT)
177#define BT_EVT_BTU_IPC_ACL_EVT (0x0001 | BT_EVT_BTU_IPC_EVT)
178#define BT_EVT_BTU_IPC_BTU_EVT (0x0002 | BT_EVT_BTU_IPC_EVT)
179#define BT_EVT_BTU_IPC_L2C_EVT (0x0003 | BT_EVT_BTU_IPC_EVT)
180#define BT_EVT_BTU_IPC_L2C_MSG_EVT (0x0004 | BT_EVT_BTU_IPC_EVT)
181#define BT_EVT_BTU_IPC_BTM_EVT (0x0005 | BT_EVT_BTU_IPC_EVT)
182#define BT_EVT_BTU_IPC_AVDT_EVT (0x0006 | BT_EVT_BTU_IPC_EVT)
183#define BT_EVT_BTU_IPC_SLIP_EVT (0x0007 | BT_EVT_BTU_IPC_EVT)
184#define BT_EVT_BTU_IPC_MGMT_EVT (0x0008 | BT_EVT_BTU_IPC_EVT)
185#define BT_EVT_BTU_IPC_BTTRC_EVT (0x0009 | BT_EVT_BTU_IPC_EVT)
186#define BT_EVT_BTU_IPC_BURST_EVT (0x000A | BT_EVT_BTU_IPC_EVT)
187
188
189/* BTIF Events */
190#define BT_EVT_BTIF 0xA000
191#define BT_EVT_CONTEXT_SWITCH_EVT (0x0001 | BT_EVT_BTIF)
192
193#define BT_EVT_TRIGGER_STACK_INIT EVENT_MASK(APPL_EVT_0)
YK Jeffrey Chao48ebe2c2013-04-24 11:38:06 -0700194#define BT_EVT_HARDWARE_INIT_FAIL EVENT_MASK(APPL_EVT_1)
The Android Open Source Project5738f832012-12-12 16:00:35 -0800195
YK Jeffrey Chao48ebe2c2013-04-24 11:38:06 -0700196#define BT_EVT_PRELOAD_CMPL EVENT_MASK(APPL_EVT_6)
The Android Open Source Project5738f832012-12-12 16:00:35 -0800197
198/* Define the header of each buffer used in the Bluetooth stack.
199*/
200typedef struct
201{
202 UINT16 event;
203 UINT16 len;
204 UINT16 offset;
205 UINT16 layer_specific;
206} BT_HDR;
207
208#define BT_HDR_SIZE (sizeof (BT_HDR))
209
210#define BT_PSM_SDP 0x0001
211#define BT_PSM_RFCOMM 0x0003
212#define BT_PSM_TCS 0x0005
213#define BT_PSM_CTP 0x0007
214#define BT_PSM_BNEP 0x000F
215#define BT_PSM_HIDC 0x0011
216#define BT_PSM_HIDI 0x0013
217#define BT_PSM_UPNP 0x0015
218#define BT_PSM_AVCTP 0x0017
219#define BT_PSM_AVDTP 0x0019
220#define BT_PSM_AVCTP_13 0x001B /* Advanced Control - Browsing */
221#define BT_PSM_UDI_CP 0x001D /* Unrestricted Digital Information Profile C-Plane */
222#define BT_PSM_ATT 0x001F /* Attribute Protocol */
223
224
225/* These macros extract the HCI opcodes from a buffer
226*/
227#define HCI_GET_CMD_HDR_OPCODE(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \
228 (*((UINT8 *)((p) + 1) + p->offset + 1) << 8)))
229#define HCI_GET_CMD_HDR_PARAM_LEN(p) (UINT8) (*((UINT8 *)((p) + 1) + p->offset + 2))
230
231#define HCI_GET_EVT_HDR_OPCODE(p) (UINT8)(*((UINT8 *)((p) + 1) + p->offset))
232#define HCI_GET_EVT_HDR_PARAM_LEN(p) (UINT8) (*((UINT8 *)((p) + 1) + p->offset + 1))
233
234
235/********************************************************************************
236** Macros to get and put bytes to and from a stream (Little Endian format).
237*/
238#define UINT32_TO_STREAM(p, u32) {*(p)++ = (UINT8)(u32); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 24);}
239#define UINT24_TO_STREAM(p, u24) {*(p)++ = (UINT8)(u24); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)((u24) >> 16);}
240#define UINT16_TO_STREAM(p, u16) {*(p)++ = (UINT8)(u16); *(p)++ = (UINT8)((u16) >> 8);}
241#define UINT8_TO_STREAM(p, u8) {*(p)++ = (UINT8)(u8);}
242#define INT8_TO_STREAM(p, u8) {*(p)++ = (INT8)(u8);}
243#define ARRAY32_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 32; ijk++) *(p)++ = (UINT8) a[31 - ijk];}
244#define ARRAY16_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 16; ijk++) *(p)++ = (UINT8) a[15 - ijk];}
245#define ARRAY8_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 8; ijk++) *(p)++ = (UINT8) a[7 - ijk];}
246#define BDADDR_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *(p)++ = (UINT8) a[BD_ADDR_LEN - 1 - ijk];}
247#define LAP_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < LAP_LEN; ijk++) *(p)++ = (UINT8) a[LAP_LEN - 1 - ijk];}
248#define DEVCLASS_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < DEV_CLASS_LEN;ijk++) *(p)++ = (UINT8) a[DEV_CLASS_LEN - 1 - ijk];}
249#define ARRAY_TO_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[ijk];}
250#define REVERSE_ARRAY_TO_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[len - 1 - ijk];}
251
252#define STREAM_TO_UINT8(u8, p) {u8 = (UINT8)(*(p)); (p) += 1;}
253#define STREAM_TO_UINT16(u16, p) {u16 = ((UINT16)(*(p)) + (((UINT16)(*((p) + 1))) << 8)); (p) += 2;}
254#define STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) ); (p) += 3;}
255#define STREAM_TO_UINT32(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) + ((((UINT32)(*((p) + 3)))) << 24)); (p) += 4;}
256#define STREAM_TO_BDADDR(a, p) {register int ijk; register UINT8 *pbda = (UINT8 *)a + BD_ADDR_LEN - 1; for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *pbda-- = *p++;}
257#define STREAM_TO_ARRAY32(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 31; for (ijk = 0; ijk < 32; ijk++) *_pa-- = *p++;}
258#define STREAM_TO_ARRAY16(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 15; for (ijk = 0; ijk < 16; ijk++) *_pa-- = *p++;}
259#define STREAM_TO_ARRAY8(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 7; for (ijk = 0; ijk < 8; ijk++) *_pa-- = *p++;}
260#define STREAM_TO_DEVCLASS(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + DEV_CLASS_LEN - 1; for (ijk = 0; ijk < DEV_CLASS_LEN; ijk++) *_pa-- = *p++;}
261#define STREAM_TO_LAP(a, p) {register int ijk; register UINT8 *plap = (UINT8 *)a + LAP_LEN - 1; for (ijk = 0; ijk < LAP_LEN; ijk++) *plap-- = *p++;}
262#define STREAM_TO_ARRAY(a, p, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;}
263#define REVERSE_STREAM_TO_ARRAY(a, p, len) {register int ijk; register UINT8 *_pa = (UINT8 *)a + len - 1; for (ijk = 0; ijk < len; ijk++) *_pa-- = *p++;}
264
265/********************************************************************************
266** Macros to get and put bytes to and from a field (Little Endian format).
267** These are the same as to stream, except the pointer is not incremented.
268*/
269#define UINT32_TO_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)(u32); *((UINT8 *)(p)+1) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+3) = (UINT8)((u32) >> 24);}
270#define UINT24_TO_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)(u24); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u24) >> 16);}
271#define UINT16_TO_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)(u16); *((UINT8 *)(p)+1) = (UINT8)((u16) >> 8);}
272#define UINT8_TO_FIELD(p, u8) {*(UINT8 *)(p) = (UINT8)(u8);}
273
274
275/********************************************************************************
276** Macros to get and put bytes to and from a stream (Big Endian format)
277*/
278#define UINT32_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 24); *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); }
279#define UINT24_TO_BE_STREAM(p, u24) {*(p)++ = (UINT8)((u24) >> 16); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)(u24);}
280#define UINT16_TO_BE_STREAM(p, u16) {*(p)++ = (UINT8)((u16) >> 8); *(p)++ = (UINT8)(u16);}
281#define UINT8_TO_BE_STREAM(p, u8) {*(p)++ = (UINT8)(u8);}
282#define ARRAY_TO_BE_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[ijk];}
283
284#define BE_STREAM_TO_UINT8(u8, p) {u8 = (UINT8)(*(p)); (p) += 1;}
285#define BE_STREAM_TO_UINT16(u16, p) {u16 = (UINT16)(((UINT16)(*(p)) << 8) + (UINT16)(*((p) + 1))); (p) += 2;}
286#define BE_STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*((p) + 2))) + ((UINT32)(*((p) + 1)) << 8) + ((UINT32)(*(p)) << 16)); (p) += 3;}
287#define BE_STREAM_TO_UINT32(u32, p) {u32 = ((UINT32)(*((p) + 3)) + ((UINT32)(*((p) + 2)) << 8) + ((UINT32)(*((p) + 1)) << 16) + ((UINT32)(*(p)) << 24)); (p) += 4;}
288#define BE_STREAM_TO_ARRAY(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;}
289
290
291/********************************************************************************
292** Macros to get and put bytes to and from a field (Big Endian format).
293** These are the same as to stream, except the pointer is not incremented.
294*/
295#define UINT32_TO_BE_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)((u32) >> 24); *((UINT8 *)(p)+1) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+3) = (UINT8)(u32); }
296#define UINT24_TO_BE_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)((u24) >> 16); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)(u24);}
297#define UINT16_TO_BE_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)((u16) >> 8); *((UINT8 *)(p)+1) = (UINT8)(u16);}
298#define UINT8_TO_BE_FIELD(p, u8) {*(UINT8 *)(p) = (UINT8)(u8);}
299
300
301/* Common Bluetooth field definitions */
302#define BD_ADDR_LEN 6 /* Device address length */
303typedef UINT8 BD_ADDR[BD_ADDR_LEN]; /* Device address */
304typedef UINT8 *BD_ADDR_PTR; /* Pointer to Device Address */
305
306#define AMP_KEY_TYPE_GAMP 0
307#define AMP_KEY_TYPE_WIFI 1
308#define AMP_KEY_TYPE_UWB 2
309typedef UINT8 tAMP_KEY_TYPE;
310
311#define BT_OCTET8_LEN 8
312typedef UINT8 BT_OCTET8[BT_OCTET8_LEN]; /* octet array: size 16 */
313
314#define LINK_KEY_LEN 16
315typedef UINT8 LINK_KEY[LINK_KEY_LEN]; /* Link Key */
316
317#define AMP_LINK_KEY_LEN 32
318typedef UINT8 AMP_LINK_KEY[AMP_LINK_KEY_LEN]; /* Dedicated AMP and GAMP Link Keys */
319
320#define BT_OCTET16_LEN 16
321typedef UINT8 BT_OCTET16[BT_OCTET16_LEN]; /* octet array: size 16 */
322
323#define PIN_CODE_LEN 16
324typedef UINT8 PIN_CODE[PIN_CODE_LEN]; /* Pin Code (upto 128 bits) MSB is 0 */
325typedef UINT8 *PIN_CODE_PTR; /* Pointer to Pin Code */
326
327#define DEV_CLASS_LEN 3
328typedef UINT8 DEV_CLASS[DEV_CLASS_LEN]; /* Device class */
329typedef UINT8 *DEV_CLASS_PTR; /* Pointer to Device class */
330
331#define EXT_INQ_RESP_LEN 3
332typedef UINT8 EXT_INQ_RESP[EXT_INQ_RESP_LEN];/* Extended Inquiry Response */
333typedef UINT8 *EXT_INQ_RESP_PTR; /* Pointer to Extended Inquiry Response */
334
335#define BD_NAME_LEN 248
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800336typedef UINT8 BD_NAME[BD_NAME_LEN + 1]; /* Device name */
The Android Open Source Project5738f832012-12-12 16:00:35 -0800337typedef UINT8 *BD_NAME_PTR; /* Pointer to Device name */
338
339#define BD_FEATURES_LEN 8
340typedef UINT8 BD_FEATURES[BD_FEATURES_LEN]; /* LMP features supported by device */
341
342#define BT_EVENT_MASK_LEN 8
343typedef UINT8 BT_EVENT_MASK[BT_EVENT_MASK_LEN]; /* Event Mask */
344
345#define LAP_LEN 3
346typedef UINT8 LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */
347typedef UINT8 INQ_LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */
348
349#define RAND_NUM_LEN 16
350typedef UINT8 RAND_NUM[RAND_NUM_LEN];
351
352#define ACO_LEN 12
353typedef UINT8 ACO[ACO_LEN]; /* Authenticated ciphering offset */
354
355#define COF_LEN 12
356typedef UINT8 COF[COF_LEN]; /* ciphering offset number */
357
358typedef struct {
359 UINT8 qos_flags; /* TBD */
360 UINT8 service_type; /* see below */
361 UINT32 token_rate; /* bytes/second */
362 UINT32 token_bucket_size; /* bytes */
363 UINT32 peak_bandwidth; /* bytes/second */
364 UINT32 latency; /* microseconds */
365 UINT32 delay_variation; /* microseconds */
366} FLOW_SPEC;
367
368/* Values for service_type */
369#define NO_TRAFFIC 0
370#define BEST_EFFORT 1
371#define GUARANTEED 2
372
373/* Service class of the CoD */
374#define SERV_CLASS_NETWORKING (1 << 1)
375#define SERV_CLASS_RENDERING (1 << 2)
376#define SERV_CLASS_CAPTURING (1 << 3)
377#define SERV_CLASS_OBJECT_TRANSFER (1 << 4)
378#define SERV_CLASS_OBJECT_AUDIO (1 << 5)
379#define SERV_CLASS_OBJECT_TELEPHONY (1 << 6)
380#define SERV_CLASS_OBJECT_INFORMATION (1 << 7)
381
382/* Second byte */
383#define SERV_CLASS_LIMITED_DISC_MODE (0x20)
384
385/* Field size definitions. Note that byte lengths are rounded up. */
386#define ACCESS_CODE_BIT_LEN 72
387#define ACCESS_CODE_BYTE_LEN 9
388#define SHORTENED_ACCESS_CODE_BIT_LEN 68
389
390typedef UINT8 ACCESS_CODE[ACCESS_CODE_BYTE_LEN];
391
392#define SYNTH_TX 1 /* want synth code to TRANSMIT at this freq */
393#define SYNTH_RX 2 /* want synth code to RECEIVE at this freq */
394
395#define SYNC_REPS 1 /* repeats of sync word transmitted to start of burst */
396
397/* Bluetooth CLK27 */
398#define BT_CLK27 (2 << 26)
399
400/* Bluetooth CLK12 is 1.28 sec */
401#define BT_CLK12_TO_MS(x) ((x) * 1280)
402#define BT_MS_TO_CLK12(x) ((x) / 1280)
403#define BT_CLK12_TO_SLOTS(x) ((x) << 11)
404
405/* Bluetooth CLK is 0.625 msec */
406#define BT_CLK_TO_MS(x) (((x) * 5 + 3) / 8)
407#define BT_MS_TO_CLK(x) (((x) * 8 + 2) / 5)
408
409#define BT_CLK_TO_MICROSECS(x) (((x) * 5000 + 3) / 8)
410#define BT_MICROSECS_TO_CLK(x) (((x) * 8 + 2499) / 5000)
411
412/* Maximum UUID size - 16 bytes, and structure to hold any type of UUID. */
413#define MAX_UUID_SIZE 16
414typedef struct
415{
416#define LEN_UUID_16 2
417#define LEN_UUID_32 4
418#define LEN_UUID_128 16
419
420 UINT16 len;
421
422 union
423 {
424 UINT16 uuid16;
425 UINT32 uuid32;
426 UINT8 uuid128[MAX_UUID_SIZE];
427 } uu;
428
429} tBT_UUID;
430
431#define BT_EIR_FLAGS_TYPE 0x01
432#define BT_EIR_MORE_16BITS_UUID_TYPE 0x02
433#define BT_EIR_COMPLETE_16BITS_UUID_TYPE 0x03
434#define BT_EIR_MORE_32BITS_UUID_TYPE 0x04
435#define BT_EIR_COMPLETE_32BITS_UUID_TYPE 0x05
436#define BT_EIR_MORE_128BITS_UUID_TYPE 0x06
437#define BT_EIR_COMPLETE_128BITS_UUID_TYPE 0x07
438#define BT_EIR_SHORTENED_LOCAL_NAME_TYPE 0x08
439#define BT_EIR_COMPLETE_LOCAL_NAME_TYPE 0x09
440#define BT_EIR_TX_POWER_LEVEL_TYPE 0x0A
441#define BT_EIR_OOB_BD_ADDR_TYPE 0x0C
442#define BT_EIR_OOB_COD_TYPE 0x0D
443#define BT_EIR_OOB_SSP_HASH_C_TYPE 0x0E
444#define BT_EIR_OOB_SSP_RAND_R_TYPE 0x0F
445#define BT_EIR_MANUFACTURER_SPECIFIC_TYPE 0xFF
446
447#define BT_OOB_COD_SIZE 3
448#define BT_OOB_HASH_C_SIZE 16
449#define BT_OOB_RAND_R_SIZE 16
450
451/* Broadcom proprietary UUIDs and reserved PSMs
452**
453** The lowest 4 bytes byte of the UUID or GUID depends on the feature. Typically,
454** the value of those bytes will be the PSM or SCN, but it is up to the features.
455*/
456#define BRCM_PROPRIETARY_UUID_BASE 0xDA, 0x23, 0x41, 0x02, 0xA3, 0xBB, 0xC1, 0x71, 0xBA, 0x09, 0x6f, 0x21
457#define BRCM_PROPRIETARY_GUID_BASE 0xda23, 0x4102, 0xa3, 0xbb, 0xc1, 0x71, 0xba, 0x09, 0x6f, 0x21
458
459/* We will not allocate a PSM in the reserved range to 3rd party apps
460*/
461#define BRCM_RESERVED_PSM_START 0x5AE1
462#define BRCM_RESERVED_PSM_END 0x5AFF
463
464#define BRCM_UTILITY_SERVICE_PSM 0x5AE1
465#define BRCM_MATCHER_PSM 0x5AE3
466
467/* Connection statistics
468*/
469
470/* Structure to hold connection stats */
471#ifndef BT_CONN_STATS_DEFINED
472#define BT_CONN_STATS_DEFINED
473
474/* These bits are used in the bIsConnected field */
475#define BT_CONNECTED_USING_BREDR 1
476#define BT_CONNECTED_USING_AMP 2
477
478typedef struct
479{
480 UINT32 is_connected;
481 INT32 rssi;
482 UINT32 bytes_sent;
483 UINT32 bytes_rcvd;
484 UINT32 duration;
485} tBT_CONN_STATS;
486
487#endif
488
489
490/*****************************************************************************
491** Low Energy definitions
492**
493** Address types
494*/
495#define BLE_ADDR_PUBLIC 0x00
496#define BLE_ADDR_RANDOM 0x01
497#define BLE_ADDR_TYPE_MASK (BLE_ADDR_RANDOM | BLE_ADDR_PUBLIC)
498typedef UINT8 tBLE_ADDR_TYPE;
499
Ganesh Ganapathi Batta7fa4fba2014-04-16 16:50:09 -0700500#define BT_TRANSPORT_BR_EDR 1
501#define BT_TRANSPORT_LE 2
502typedef UINT8 tBT_TRANSPORT;
503
The Android Open Source Project5738f832012-12-12 16:00:35 -0800504#define BLE_ADDR_IS_STATIC(x) ((x[0] & 0xC0) == 0xC0)
505
506typedef struct
507{
508 tBLE_ADDR_TYPE type;
509 BD_ADDR bda;
510} tBLE_BD_ADDR;
511
512/* Device Types
513*/
514#define BT_DEVICE_TYPE_BREDR 0x01
515#define BT_DEVICE_TYPE_BLE 0x02
516#define BT_DEVICE_TYPE_DUMO 0x03
517typedef UINT8 tBT_DEVICE_TYPE;
518/*****************************************************************************/
519
520
521/* Define trace levels */
522#define BT_TRACE_LEVEL_NONE 0 /* No trace messages to be generated */
523#define BT_TRACE_LEVEL_ERROR 1 /* Error condition trace messages */
524#define BT_TRACE_LEVEL_WARNING 2 /* Warning condition trace messages */
525#define BT_TRACE_LEVEL_API 3 /* API traces */
526#define BT_TRACE_LEVEL_EVENT 4 /* Debug messages for events */
527#define BT_TRACE_LEVEL_DEBUG 5 /* Full debug messages */
528#define BT_TRACE_LEVEL_VERBOSE 6 /* Verbose debug messages */
529
530#define MAX_TRACE_LEVEL 6
531
532
533/* Define New Trace Type Definition */
534/* TRACE_CTRL_TYPE 0x^^000000*/
535#define TRACE_CTRL_MASK 0xff000000
536#define TRACE_GET_CTRL(x) ((((UINT32)(x)) & TRACE_CTRL_MASK) >> 24)
537
538#define TRACE_CTRL_GENERAL 0x00000000
539#define TRACE_CTRL_STR_RESOURCE 0x01000000
540#define TRACE_CTRL_SEQ_FLOW 0x02000000
541#define TRACE_CTRL_MAX_NUM 3
542
543/* LAYER SPECIFIC 0x00^^0000*/
544#define TRACE_LAYER_MASK 0x00ff0000
545#define TRACE_GET_LAYER(x) ((((UINT32)(x)) & TRACE_LAYER_MASK) >> 16)
546
547#define TRACE_LAYER_NONE 0x00000000
548#define TRACE_LAYER_USB 0x00010000
549#define TRACE_LAYER_SERIAL 0x00020000
550#define TRACE_LAYER_SOCKET 0x00030000
551#define TRACE_LAYER_RS232 0x00040000
552#define TRACE_LAYER_TRANS_MAX_NUM 5
553#define TRACE_LAYER_TRANS_ALL 0x007f0000
554#define TRACE_LAYER_LC 0x00050000
555#define TRACE_LAYER_LM 0x00060000
556#define TRACE_LAYER_HCI 0x00070000
557#define TRACE_LAYER_L2CAP 0x00080000
558#define TRACE_LAYER_RFCOMM 0x00090000
559#define TRACE_LAYER_SDP 0x000a0000
560#define TRACE_LAYER_TCS 0x000b0000
561#define TRACE_LAYER_OBEX 0x000c0000
562#define TRACE_LAYER_BTM 0x000d0000
563#define TRACE_LAYER_GAP 0x000e0000
564#define TRACE_LAYER_DUN 0x000f0000
565#define TRACE_LAYER_GOEP 0x00100000
566#define TRACE_LAYER_ICP 0x00110000
567#define TRACE_LAYER_HSP2 0x00120000
568#define TRACE_LAYER_SPP 0x00130000
569#define TRACE_LAYER_CTP 0x00140000
570#define TRACE_LAYER_BPP 0x00150000
571#define TRACE_LAYER_HCRP 0x00160000
572#define TRACE_LAYER_FTP 0x00170000
573#define TRACE_LAYER_OPP 0x00180000
574#define TRACE_LAYER_BTU 0x00190000
575#define TRACE_LAYER_GKI 0x001a0000
576#define TRACE_LAYER_BNEP 0x001b0000
577#define TRACE_LAYER_PAN 0x001c0000
578#define TRACE_LAYER_HFP 0x001d0000
579#define TRACE_LAYER_HID 0x001e0000
580#define TRACE_LAYER_BIP 0x001f0000
581#define TRACE_LAYER_AVP 0x00200000
582#define TRACE_LAYER_A2D 0x00210000
583#define TRACE_LAYER_SAP 0x00220000
584#define TRACE_LAYER_AMP 0x00230000
585#define TRACE_LAYER_MCA 0x00240000
586#define TRACE_LAYER_ATT 0x00250000
587#define TRACE_LAYER_SMP 0x00260000
588#define TRACE_LAYER_NFC 0x00270000
589#define TRACE_LAYER_NCI 0x00280000
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800590#define TRACE_LAYER_LLCP 0x00290000
591#define TRACE_LAYER_NDEF 0x002a0000
592#define TRACE_LAYER_RW 0x002b0000
593#define TRACE_LAYER_CE 0x002c0000
594#define TRACE_LAYER_P2P 0x002d0000
The Android Open Source Project5738f832012-12-12 16:00:35 -0800595#define TRACE_LAYER_SNEP 0x002e0000
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800596#define TRACE_LAYER_CHO 0x002f0000
The Android Open Source Project5738f832012-12-12 16:00:35 -0800597#define TRACE_LAYER_NFA 0x00300000
598
599#define TRACE_LAYER_MAX_NUM 0x0031
600
601
602/* TRACE_ORIGINATOR 0x0000^^00*/
603#define TRACE_ORG_MASK 0x0000ff00
604#define TRACE_GET_ORG(x) ((((UINT32)(x)) & TRACE_ORG_MASK) >> 8)
605
606#define TRACE_ORG_STACK 0x00000000
607#define TRACE_ORG_HCI_TRANS 0x00000100
608#define TRACE_ORG_PROTO_DISP 0x00000200
609#define TRACE_ORG_RPC 0x00000300
610#define TRACE_ORG_GKI 0x00000400
611#define TRACE_ORG_APPL 0x00000500
612#define TRACE_ORG_SCR_WRAPPER 0x00000600
613#define TRACE_ORG_SCR_ENGINE 0x00000700
614#define TRACE_ORG_USER_SCR 0x00000800
615#define TRACE_ORG_TESTER 0x00000900
616#define TRACE_ORG_MAX_NUM 10 /* 32-bit mask; must be < 32 */
617#define TRACE_LITE_ORG_MAX_NUM 6
618#define TRACE_ORG_ALL 0x03ff
619#define TRACE_ORG_RPC_TRANS 0x04
620
621#define TRACE_ORG_REG 0x00000909
622#define TRACE_ORG_REG_SUCCESS 0x0000090a
623
624/* TRACE_TYPE 0x000000^^*/
625#define TRACE_TYPE_MASK 0x000000ff
626#define TRACE_GET_TYPE(x) (((UINT32)(x)) & TRACE_TYPE_MASK)
627
628#define TRACE_TYPE_ERROR 0x00000000
629#define TRACE_TYPE_WARNING 0x00000001
630#define TRACE_TYPE_API 0x00000002
631#define TRACE_TYPE_EVENT 0x00000003
632#define TRACE_TYPE_DEBUG 0x00000004
633#define TRACE_TYPE_STACK_ONLY_MAX TRACE_TYPE_DEBUG
634#define TRACE_TYPE_TX 0x00000005
635#define TRACE_TYPE_RX 0x00000006
636#define TRACE_TYPE_DEBUG_ASSERT 0x00000007
637#define TRACE_TYPE_GENERIC 0x00000008
638#define TRACE_TYPE_REG 0x00000009
639#define TRACE_TYPE_REG_SUCCESS 0x0000000a
640#define TRACE_TYPE_CMD_TX 0x0000000b
641#define TRACE_TYPE_EVT_TX 0x0000000c
642#define TRACE_TYPE_ACL_TX 0x0000000d
643#define TRACE_TYPE_CMD_RX 0x0000000e
644#define TRACE_TYPE_EVT_RX 0x0000000f
645#define TRACE_TYPE_ACL_RX 0x00000010
646#define TRACE_TYPE_TARGET_TRACE 0x00000011
647#define TRACE_TYPE_SCO_TX 0x00000012
648#define TRACE_TYPE_SCO_RX 0x00000013
649
650
651#define TRACE_TYPE_MAX_NUM 20
652#define TRACE_TYPE_ALL 0xffff
653
654/* Define color for script type */
655#define SCR_COLOR_DEFAULT 0
656#define SCR_COLOR_TYPE_COMMENT 1
657#define SCR_COLOR_TYPE_COMMAND 2
658#define SCR_COLOR_TYPE_EVENT 3
659#define SCR_COLOR_TYPE_SELECT 4
660
661/* Define protocol trace flag values */
662#define SCR_PROTO_TRACE_HCI_SUMMARY 0x00000001
663#define SCR_PROTO_TRACE_HCI_DATA 0x00000002
664#define SCR_PROTO_TRACE_L2CAP 0x00000004
665#define SCR_PROTO_TRACE_RFCOMM 0x00000008
666#define SCR_PROTO_TRACE_SDP 0x00000010
667#define SCR_PROTO_TRACE_TCS 0x00000020
668#define SCR_PROTO_TRACE_OBEX 0x00000040
669#define SCR_PROTO_TRACE_OAPP 0x00000080 /* OBEX Application Profile */
670#define SCR_PROTO_TRACE_AMP 0x00000100
671#define SCR_PROTO_TRACE_BNEP 0x00000200
672#define SCR_PROTO_TRACE_AVP 0x00000400
673#define SCR_PROTO_TRACE_MCA 0x00000800
674#define SCR_PROTO_TRACE_ATT 0x00001000
675#define SCR_PROTO_TRACE_SMP 0x00002000
676#define SCR_PROTO_TRACE_NCI 0x00004000
Ganesh Ganapathi Battaead3cde2013-02-05 15:22:31 -0800677#define SCR_PROTO_TRACE_LLCP 0x00008000
678#define SCR_PROTO_TRACE_NDEF 0x00010000
679#define SCR_PROTO_TRACE_RW 0x00020000
680#define SCR_PROTO_TRACE_CE 0x00040000
681#define SCR_PROTO_TRACE_SNEP 0x00080000
682#define SCR_PROTO_TRACE_CHO 0x00100000
683#define SCR_PROTO_TRACE_ALL 0x001fffff
The Android Open Source Project5738f832012-12-12 16:00:35 -0800684#define SCR_PROTO_TRACE_HCI_LOGGING_VSE 0x0800 /* Brcm vs event for logmsg and protocol traces */
685
686#define MAX_SCRIPT_TYPE 5
687
688#define TCS_PSM_INTERCOM 5
689#define TCS_PSM_CORDLESS 7
690#define BT_PSM_BNEP 0x000F
691/* Define PSMs HID uses */
692#define HID_PSM_CONTROL 0x0011
693#define HID_PSM_INTERRUPT 0x0013
694
695/* Define a function for logging */
696typedef void (BT_LOG_FUNC) (int trace_type, const char *fmt_str, ...);
697
698#endif
699