| /*-------------------------------------------------------------------------- |
| Copyright (c) 2010-2015, The Linux Foundation. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| * Neither the name of The Linux Foundation nor |
| the names of its contributors may be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
| ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| --------------------------------------------------------------------------*/ |
| |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/prctl.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include "video_encoder_device_v4l2.h" |
| #include "omx_video_encoder.h" |
| #include <linux/android_pmem.h> |
| #include <media/msm_vidc.h> |
| #ifdef USE_ION |
| #include <linux/msm_ion.h> |
| #endif |
| #include <media/msm_media_info.h> |
| #include <cutils/properties.h> |
| #include <media/hardware/HardwareAPI.h> |
| |
| #ifdef _ANDROID_ |
| #include <media/hardware/HardwareAPI.h> |
| #include <gralloc_priv.h> |
| #endif |
| |
| #define ALIGN(x, to_align) ((((unsigned) x) + (to_align - 1)) & ~(to_align - 1)) |
| #define EXTRADATA_IDX(__num_planes) (__num_planes - 1) |
| #define MAXDPB 16 |
| #define MIN(x,y) (((x) < (y)) ? (x) : (y)) |
| #define MAX_PROFILE_PARAMS 6 |
| #define MPEG4_SP_START 0 |
| #define MPEG4_ASP_START (MPEG4_SP_START + 10) |
| #define H263_BP_START 0 |
| #define H264_BP_START 0 |
| #define H264_HP_START (H264_BP_START + 17) |
| #define H264_MP_START (H264_BP_START + 34) |
| #define POLL_TIMEOUT 1000 |
| #define MAX_SUPPORTED_SLICES_PER_FRAME 28 /* Max supported slices with 32 output buffers */ |
| |
| #define SZ_4K 0x1000 |
| #define SZ_1M 0x100000 |
| |
| /* MPEG4 profile and level table*/ |
| static const unsigned int mpeg4_profile_level_table[][MAX_PROFILE_PARAMS]= { |
| /*max mb per frame, max mb per sec, max bitrate, level, profile, dpbmbs*/ |
| {99,1485,64000,OMX_VIDEO_MPEG4Level0,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {99,1485,64000,OMX_VIDEO_MPEG4Level1,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {396,5940,128000,OMX_VIDEO_MPEG4Level2,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {396,11880,384000,OMX_VIDEO_MPEG4Level3,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {1200,36000,4000000,OMX_VIDEO_MPEG4Level4a,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {1620,40500,8000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {3600,108000,12000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {32400,972000,20000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {34560,1036800,20000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileSimple,0}, |
| {0,0,0,0,0,0}, |
| |
| {99,1485,128000,OMX_VIDEO_MPEG4Level0,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {99,1485,128000,OMX_VIDEO_MPEG4Level1,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {396,5940,384000,OMX_VIDEO_MPEG4Level2,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {396,11880,768000,OMX_VIDEO_MPEG4Level3,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {792,23760,3000000,OMX_VIDEO_MPEG4Level4,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {1620,48600,8000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {32400,972000,20000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {34560,1036800,20000000,OMX_VIDEO_MPEG4Level5,OMX_VIDEO_MPEG4ProfileAdvancedSimple,0}, |
| {0,0,0,0,0,0}, |
| }; |
| |
| /* H264 profile and level table*/ |
| static const unsigned int h264_profile_level_table[][MAX_PROFILE_PARAMS]= { |
| /*max mb per frame, max mb per sec, max bitrate, level, profile, dpbmbs*/ |
| {99,1485,64000,OMX_VIDEO_AVCLevel1,OMX_VIDEO_AVCProfileBaseline,396}, |
| {99,1485,128000,OMX_VIDEO_AVCLevel1b,OMX_VIDEO_AVCProfileBaseline,396}, |
| {396,3000,192000,OMX_VIDEO_AVCLevel11,OMX_VIDEO_AVCProfileBaseline,900}, |
| {396,6000,384000,OMX_VIDEO_AVCLevel12,OMX_VIDEO_AVCProfileBaseline,2376}, |
| {396,11880,768000,OMX_VIDEO_AVCLevel13,OMX_VIDEO_AVCProfileBaseline,2376}, |
| {396,11880,2000000,OMX_VIDEO_AVCLevel2,OMX_VIDEO_AVCProfileBaseline,2376}, |
| {792,19800,4000000,OMX_VIDEO_AVCLevel21,OMX_VIDEO_AVCProfileBaseline,4752}, |
| {1620,20250,4000000,OMX_VIDEO_AVCLevel22,OMX_VIDEO_AVCProfileBaseline,8100}, |
| {1620,40500,10000000,OMX_VIDEO_AVCLevel3,OMX_VIDEO_AVCProfileBaseline,8100}, |
| {3600,108000,14000000,OMX_VIDEO_AVCLevel31,OMX_VIDEO_AVCProfileBaseline,18000}, |
| {5120,216000,20000000,OMX_VIDEO_AVCLevel32,OMX_VIDEO_AVCProfileBaseline,20480}, |
| {8192,245760,20000000,OMX_VIDEO_AVCLevel4,OMX_VIDEO_AVCProfileBaseline,32768}, |
| {8192,245760,50000000,OMX_VIDEO_AVCLevel41,OMX_VIDEO_AVCProfileBaseline,32768}, |
| {8704,522240,50000000,OMX_VIDEO_AVCLevel42,OMX_VIDEO_AVCProfileBaseline,34816}, |
| {22080,589824,135000000,OMX_VIDEO_AVCLevel5,OMX_VIDEO_AVCProfileBaseline,110400}, |
| {36864,983040,240000000,OMX_VIDEO_AVCLevel51,OMX_VIDEO_AVCProfileBaseline,184320}, |
| {36864,2073600,240000000,OMX_VIDEO_AVCLevel52,OMX_VIDEO_AVCProfileBaseline,184320}, |
| {0,0,0,0,0,0}, |
| |
| {99,1485,64000,OMX_VIDEO_AVCLevel1,OMX_VIDEO_AVCProfileHigh,396}, |
| {99,1485,160000,OMX_VIDEO_AVCLevel1b,OMX_VIDEO_AVCProfileHigh,396}, |
| {396,3000,240000,OMX_VIDEO_AVCLevel11,OMX_VIDEO_AVCProfileHigh,900}, |
| {396,6000,480000,OMX_VIDEO_AVCLevel12,OMX_VIDEO_AVCProfileHigh,2376}, |
| {396,11880,960000,OMX_VIDEO_AVCLevel13,OMX_VIDEO_AVCProfileHigh,2376}, |
| {396,11880,2500000,OMX_VIDEO_AVCLevel2,OMX_VIDEO_AVCProfileHigh,2376}, |
| {792,19800,5000000,OMX_VIDEO_AVCLevel21,OMX_VIDEO_AVCProfileHigh,4752}, |
| {1620,20250,5000000,OMX_VIDEO_AVCLevel22,OMX_VIDEO_AVCProfileHigh,8100}, |
| {1620,40500,12500000,OMX_VIDEO_AVCLevel3,OMX_VIDEO_AVCProfileHigh,8100}, |
| {3600,108000,17500000,OMX_VIDEO_AVCLevel31,OMX_VIDEO_AVCProfileHigh,18000}, |
| {5120,216000,25000000,OMX_VIDEO_AVCLevel32,OMX_VIDEO_AVCProfileHigh,20480}, |
| {8192,245760,25000000,OMX_VIDEO_AVCLevel4,OMX_VIDEO_AVCProfileHigh,32768}, |
| {8192,245760,50000000,OMX_VIDEO_AVCLevel41,OMX_VIDEO_AVCProfileHigh,32768}, |
| {8704,522240,50000000,OMX_VIDEO_AVCLevel42,OMX_VIDEO_AVCProfileHigh,34816}, |
| {22080,589824,135000000,OMX_VIDEO_AVCLevel5,OMX_VIDEO_AVCProfileHigh,110400}, |
| {36864,983040,240000000,OMX_VIDEO_AVCLevel51,OMX_VIDEO_AVCProfileHigh,184320}, |
| {36864,2073600,240000000,OMX_VIDEO_AVCLevel52,OMX_VIDEO_AVCProfileHigh,184320}, |
| {0,0,0,0,0,0}, |
| |
| {99,1485,64000,OMX_VIDEO_AVCLevel1,OMX_VIDEO_AVCProfileMain,396}, |
| {99,1485,128000,OMX_VIDEO_AVCLevel1b,OMX_VIDEO_AVCProfileMain,396}, |
| {396,3000,192000,OMX_VIDEO_AVCLevel11,OMX_VIDEO_AVCProfileMain,900}, |
| {396,6000,384000,OMX_VIDEO_AVCLevel12,OMX_VIDEO_AVCProfileMain,2376}, |
| {396,11880,768000,OMX_VIDEO_AVCLevel13,OMX_VIDEO_AVCProfileMain,2376}, |
| {396,11880,2000000,OMX_VIDEO_AVCLevel2,OMX_VIDEO_AVCProfileMain,2376}, |
| {792,19800,4000000,OMX_VIDEO_AVCLevel21,OMX_VIDEO_AVCProfileMain,4752}, |
| {1620,20250,4000000,OMX_VIDEO_AVCLevel22,OMX_VIDEO_AVCProfileMain,8100}, |
| {1620,40500,10000000,OMX_VIDEO_AVCLevel3,OMX_VIDEO_AVCProfileMain,8100}, |
| {3600,108000,14000000,OMX_VIDEO_AVCLevel31,OMX_VIDEO_AVCProfileMain,18000}, |
| {5120,216000,20000000,OMX_VIDEO_AVCLevel32,OMX_VIDEO_AVCProfileMain,20480}, |
| {8192,245760,20000000,OMX_VIDEO_AVCLevel4,OMX_VIDEO_AVCProfileMain,32768}, |
| {8192,245760,50000000,OMX_VIDEO_AVCLevel41,OMX_VIDEO_AVCProfileMain,32768}, |
| {8704,522240,50000000,OMX_VIDEO_AVCLevel42,OMX_VIDEO_AVCProfileMain,34816}, |
| {22080,589824,135000000,OMX_VIDEO_AVCLevel5,OMX_VIDEO_AVCProfileMain,110400}, |
| {36864,983040,240000000,OMX_VIDEO_AVCLevel51,OMX_VIDEO_AVCProfileMain,184320}, |
| {36864,2073600,240000000,OMX_VIDEO_AVCLevel52,OMX_VIDEO_AVCProfileMain,184320}, |
| {0,0,0,0,0,0} |
| |
| }; |
| |
| /* H263 profile and level table*/ |
| static const unsigned int h263_profile_level_table[][MAX_PROFILE_PARAMS]= { |
| /*max mb per frame, max mb per sec, max bitrate, level, profile, dpbmbs*/ |
| {99,1485,64000,OMX_VIDEO_H263Level10,OMX_VIDEO_H263ProfileBaseline,0}, |
| {396,5940,128000,OMX_VIDEO_H263Level20,OMX_VIDEO_H263ProfileBaseline,0}, |
| {396,11880,384000,OMX_VIDEO_H263Level30,OMX_VIDEO_H263ProfileBaseline,0}, |
| {396,11880,2048000,OMX_VIDEO_H263Level40,OMX_VIDEO_H263ProfileBaseline,0}, |
| {99,1485,128000,OMX_VIDEO_H263Level45,OMX_VIDEO_H263ProfileBaseline,0}, |
| {396,19800,4096000,OMX_VIDEO_H263Level50,OMX_VIDEO_H263ProfileBaseline,0}, |
| {810,40500,8192000,OMX_VIDEO_H263Level60,OMX_VIDEO_H263ProfileBaseline,0}, |
| {1620,81000,16384000,OMX_VIDEO_H263Level70,OMX_VIDEO_H263ProfileBaseline,0}, |
| {32400,972000,20000000,OMX_VIDEO_H263Level70,OMX_VIDEO_H263ProfileBaseline,0}, |
| {34560,1036800,20000000,OMX_VIDEO_H263Level70,OMX_VIDEO_H263ProfileBaseline,0}, |
| {0,0,0,0,0,0} |
| }; |
| |
| #define Log2(number, power) { OMX_U32 temp = number; power = 0; while( (0 == (temp & 0x1)) && power < 16) { temp >>=0x1; power++; } } |
| #define Q16ToFraction(q,num,den) { OMX_U32 power; Log2(q,power); num = q >> power; den = 0x1 << (16 - power); } |
| |
| #define BUFFER_LOG_LOC "/data/misc/media" |
| |
| //constructor |
| venc_dev::venc_dev(class omx_venc *venc_class) |
| { |
| //nothing to do |
| int i = 0; |
| venc_handle = venc_class; |
| etb = ebd = ftb = fbd = 0; |
| |
| for (i = 0; i < MAX_PORT; i++) |
| streaming[i] = false; |
| |
| stopped = 1; |
| paused = false; |
| async_thread_created = false; |
| color_format = 0; |
| hw_overload = false; |
| pthread_mutex_init(&pause_resume_mlock, NULL); |
| pthread_cond_init(&pause_resume_cond, NULL); |
| memset(&extradata_info, 0, sizeof(extradata_info)); |
| memset(&idrperiod, 0, sizeof(idrperiod)); |
| memset(&multislice, 0, sizeof(multislice)); |
| memset (&slice_mode, 0 , sizeof(slice_mode)); |
| memset(&m_sVenc_cfg, 0, sizeof(m_sVenc_cfg)); |
| memset(&rate_ctrl, 0, sizeof(rate_ctrl)); |
| memset(&bitrate, 0, sizeof(bitrate)); |
| memset(&intra_period, 0, sizeof(intra_period)); |
| memset(&codec_profile, 0, sizeof(codec_profile)); |
| memset(&set_param, 0, sizeof(set_param)); |
| memset(&time_inc, 0, sizeof(time_inc)); |
| memset(&m_sInput_buff_property, 0, sizeof(m_sInput_buff_property)); |
| memset(&m_sOutput_buff_property, 0, sizeof(m_sOutput_buff_property)); |
| memset(&session_qp, 0, sizeof(session_qp)); |
| memset(&entropy, 0, sizeof(entropy)); |
| memset(&dbkfilter, 0, sizeof(dbkfilter)); |
| memset(&intra_refresh, 0, sizeof(intra_refresh)); |
| memset(&hec, 0, sizeof(hec)); |
| memset(&voptimecfg, 0, sizeof(voptimecfg)); |
| memset(&capability, 0, sizeof(capability)); |
| memset(&hier_p_layers,0,sizeof(hier_p_layers)); |
| memset(<rinfo, 0, sizeof(ltrinfo)); |
| memset(&m_debug,0,sizeof(m_debug)); |
| sess_priority.priority = 1; |
| operating_rate = 0; |
| |
| char property_value[PROPERTY_VALUE_MAX] = {0}; |
| property_get("vidc.enc.log.in", property_value, "0"); |
| m_debug.in_buffer_log = atoi(property_value); |
| |
| property_get("vidc.enc.log.out", property_value, "0"); |
| m_debug.out_buffer_log = atoi(property_value); |
| |
| property_get("vidc.enc.log.extradata", property_value, "0"); |
| m_debug.extradata_log = atoi(property_value); |
| |
| snprintf(m_debug.log_loc, PROPERTY_VALUE_MAX, |
| "%s", BUFFER_LOG_LOC); |
| } |
| |
| venc_dev::~venc_dev() |
| { |
| //nothing to do |
| } |
| |
| void* venc_dev::async_venc_message_thread (void *input) |
| { |
| struct venc_msg venc_msg; |
| omx_video* omx_venc_base = NULL; |
| omx_venc *omx = reinterpret_cast<omx_venc*>(input); |
| omx_venc_base = reinterpret_cast<omx_video*>(input); |
| OMX_BUFFERHEADERTYPE* omxhdr = NULL; |
| |
| prctl(PR_SET_NAME, (unsigned long)"VideoEncCallBackThread", 0, 0, 0); |
| struct v4l2_plane plane[VIDEO_MAX_PLANES]; |
| struct pollfd pfd; |
| struct v4l2_buffer v4l2_buf; |
| struct v4l2_event dqevent; |
| pfd.events = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM | POLLRDBAND | POLLPRI; |
| pfd.fd = omx->handle->m_nDriver_fd; |
| int error_code = 0,rc=0; |
| |
| memset(&v4l2_buf, 0, sizeof(v4l2_buf)); |
| |
| while (1) { |
| pthread_mutex_lock(&omx->handle->pause_resume_mlock); |
| |
| if (omx->handle->paused) { |
| venc_msg.msgcode = VEN_MSG_PAUSE; |
| venc_msg.statuscode = VEN_S_SUCCESS; |
| |
| if (omx->async_message_process(input, &venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to process pause msg"); |
| pthread_mutex_unlock(&omx->handle->pause_resume_mlock); |
| break; |
| } |
| |
| /* Block here until the IL client resumes us again */ |
| pthread_cond_wait(&omx->handle->pause_resume_cond, |
| &omx->handle->pause_resume_mlock); |
| |
| venc_msg.msgcode = VEN_MSG_RESUME; |
| venc_msg.statuscode = VEN_S_SUCCESS; |
| |
| if (omx->async_message_process(input, &venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to process resume msg"); |
| pthread_mutex_unlock(&omx->handle->pause_resume_mlock); |
| break; |
| } |
| } |
| |
| pthread_mutex_unlock(&omx->handle->pause_resume_mlock); |
| |
| rc = poll(&pfd, 1, POLL_TIMEOUT); |
| |
| if (!rc) { |
| DEBUG_PRINT_HIGH("Poll timedout, pipeline stalled due to client/firmware ETB: %d, EBD: %d, FTB: %d, FBD: %d", |
| omx->handle->etb, omx->handle->ebd, omx->handle->ftb, omx->handle->fbd); |
| continue; |
| } else if (rc < 0 && errno != EINTR && errno != EAGAIN) { |
| DEBUG_PRINT_ERROR("Error while polling: %d, errno = %d", rc, errno); |
| break; |
| } |
| |
| if ((pfd.revents & POLLIN) || (pfd.revents & POLLRDNORM)) { |
| v4l2_buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| v4l2_buf.memory = V4L2_MEMORY_USERPTR; |
| v4l2_buf.length = omx->handle->num_planes; |
| v4l2_buf.m.planes = plane; |
| |
| while (!ioctl(pfd.fd, VIDIOC_DQBUF, &v4l2_buf)) { |
| venc_msg.msgcode=VEN_MSG_OUTPUT_BUFFER_DONE; |
| venc_msg.statuscode=VEN_S_SUCCESS; |
| omxhdr=omx_venc_base->m_out_mem_ptr+v4l2_buf.index; |
| venc_msg.buf.len= v4l2_buf.m.planes->bytesused; |
| venc_msg.buf.offset = v4l2_buf.m.planes->data_offset; |
| venc_msg.buf.flags = 0; |
| venc_msg.buf.ptrbuffer = (OMX_U8 *)omx_venc_base->m_pOutput_pmem[v4l2_buf.index].buffer; |
| venc_msg.buf.clientdata=(void*)omxhdr; |
| venc_msg.buf.timestamp = (uint64_t) v4l2_buf.timestamp.tv_sec * (uint64_t) 1000000 + (uint64_t) v4l2_buf.timestamp.tv_usec; |
| |
| /* TODO: ideally report other types of frames as well |
| * for now it doesn't look like IL client cares about |
| * other types |
| */ |
| if (v4l2_buf.flags & V4L2_QCOM_BUF_FLAG_IDRFRAME) |
| venc_msg.buf.flags |= QOMX_VIDEO_PictureTypeIDR; |
| |
| if (v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) |
| venc_msg.buf.flags |= OMX_BUFFERFLAG_SYNCFRAME; |
| |
| if (v4l2_buf.flags & V4L2_QCOM_BUF_FLAG_CODECCONFIG) |
| venc_msg.buf.flags |= OMX_BUFFERFLAG_CODECCONFIG; |
| |
| if (v4l2_buf.flags & V4L2_QCOM_BUF_FLAG_EOS) |
| venc_msg.buf.flags |= OMX_BUFFERFLAG_EOS; |
| |
| if (omx->handle->num_planes > 1 && v4l2_buf.m.planes->bytesused) |
| venc_msg.buf.flags |= OMX_BUFFERFLAG_EXTRADATA; |
| |
| if (omxhdr->nFilledLen) |
| venc_msg.buf.flags |= OMX_BUFFERFLAG_ENDOFFRAME; |
| |
| omx->handle->fbd++; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| } |
| } |
| |
| if ((pfd.revents & POLLOUT) || (pfd.revents & POLLWRNORM)) { |
| v4l2_buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| v4l2_buf.memory = V4L2_MEMORY_USERPTR; |
| v4l2_buf.m.planes = plane; |
| v4l2_buf.length = 1; |
| |
| while (!ioctl(pfd.fd, VIDIOC_DQBUF, &v4l2_buf)) { |
| venc_msg.msgcode=VEN_MSG_INPUT_BUFFER_DONE; |
| venc_msg.statuscode=VEN_S_SUCCESS; |
| if (omx_venc_base->mUseProxyColorFormat && !omx_venc_base->mUsesColorConversion) |
| omxhdr = &omx_venc_base->meta_buffer_hdr[v4l2_buf.index]; |
| else |
| omxhdr = &omx_venc_base->m_inp_mem_ptr[v4l2_buf.index]; |
| |
| venc_msg.buf.clientdata=(void*)omxhdr; |
| omx->handle->ebd++; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| } |
| } |
| |
| if (pfd.revents & POLLPRI) { |
| rc = ioctl(pfd.fd, VIDIOC_DQEVENT, &dqevent); |
| |
| if (dqevent.type == V4L2_EVENT_MSM_VIDC_CLOSE_DONE) { |
| DEBUG_PRINT_HIGH("CLOSE DONE"); |
| break; |
| } else if (dqevent.type == V4L2_EVENT_MSM_VIDC_FLUSH_DONE) { |
| venc_msg.msgcode = VEN_MSG_FLUSH_INPUT_DONE; |
| venc_msg.statuscode = VEN_S_SUCCESS; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| |
| venc_msg.msgcode = VEN_MSG_FLUSH_OUPUT_DONE; |
| venc_msg.statuscode = VEN_S_SUCCESS; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| } else if (dqevent.type == V4L2_EVENT_MSM_VIDC_HW_OVERLOAD) { |
| DEBUG_PRINT_ERROR("HW Overload received"); |
| venc_msg.statuscode = VEN_S_EFAIL; |
| venc_msg.msgcode = VEN_MSG_HW_OVERLOAD; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| } else if (dqevent.type == V4L2_EVENT_MSM_VIDC_SYS_ERROR){ |
| DEBUG_PRINT_ERROR("ERROR: Encoder is in bad state"); |
| venc_msg.msgcode = VEN_MSG_INDICATION; |
| venc_msg.statuscode=VEN_S_EFAIL; |
| |
| if (omx->async_message_process(input,&venc_msg) < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Wrong ioctl message"); |
| break; |
| } |
| } |
| } |
| } |
| |
| DEBUG_PRINT_HIGH("omx_venc: Async Thread exit"); |
| return NULL; |
| } |
| |
| static const int event_type[] = { |
| V4L2_EVENT_MSM_VIDC_FLUSH_DONE, |
| V4L2_EVENT_MSM_VIDC_CLOSE_DONE, |
| V4L2_EVENT_MSM_VIDC_SYS_ERROR |
| }; |
| |
| static OMX_ERRORTYPE subscribe_to_events(int fd) |
| { |
| OMX_ERRORTYPE eRet = OMX_ErrorNone; |
| struct v4l2_event_subscription sub; |
| int array_sz = sizeof(event_type)/sizeof(int); |
| int i,rc; |
| memset(&sub, 0, sizeof(sub)); |
| |
| if (fd < 0) { |
| DEBUG_PRINT_ERROR("Invalid input: %d", fd); |
| return OMX_ErrorBadParameter; |
| } |
| |
| for (i = 0; i < array_sz; ++i) { |
| memset(&sub, 0, sizeof(sub)); |
| sub.type = event_type[i]; |
| rc = ioctl(fd, VIDIOC_SUBSCRIBE_EVENT, &sub); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to subscribe event: 0x%x", sub.type); |
| break; |
| } |
| } |
| |
| if (i < array_sz) { |
| for (--i; i >=0 ; i--) { |
| memset(&sub, 0, sizeof(sub)); |
| sub.type = event_type[i]; |
| rc = ioctl(fd, VIDIOC_UNSUBSCRIBE_EVENT, &sub); |
| |
| if (rc) |
| DEBUG_PRINT_ERROR("Failed to unsubscribe event: 0x%x", sub.type); |
| } |
| |
| eRet = OMX_ErrorNotImplemented; |
| } |
| |
| return eRet; |
| } |
| |
| int venc_dev::append_mbi_extradata(void *dst, struct msm_vidc_extradata_header* src) |
| { |
| OMX_QCOM_EXTRADATA_MBINFO *mbi = (OMX_QCOM_EXTRADATA_MBINFO *)dst; |
| |
| if (!dst || !src) |
| return 0; |
| |
| /* TODO: Once Venus 3XX target names are known, nFormat should 2 for those |
| * targets, since the payload format will be different */ |
| mbi->nFormat = 1; |
| mbi->nDataSize = src->data_size; |
| memcpy(&mbi->data, &src->data, src->data_size); |
| |
| return mbi->nDataSize + sizeof(*mbi); |
| } |
| |
| bool venc_dev::handle_extradata(void *buffer, int index) |
| { |
| OMX_BUFFERHEADERTYPE *p_bufhdr = (OMX_BUFFERHEADERTYPE *) buffer; |
| OMX_OTHER_EXTRADATATYPE *p_extra = NULL; |
| |
| if (!extradata_info.uaddr) { |
| DEBUG_PRINT_ERROR("Extradata buffers not allocated"); |
| return false; |
| } |
| |
| p_extra = (OMX_OTHER_EXTRADATATYPE *)ALIGN(p_bufhdr->pBuffer + |
| p_bufhdr->nOffset + p_bufhdr->nFilledLen, 4); |
| |
| if (extradata_info.buffer_size > |
| p_bufhdr->nAllocLen - ALIGN(p_bufhdr->nOffset + p_bufhdr->nFilledLen, 4)) { |
| DEBUG_PRINT_ERROR("Insufficient buffer size for extradata"); |
| p_extra = NULL; |
| return false; |
| } else if (sizeof(msm_vidc_extradata_header) != sizeof(OMX_OTHER_EXTRADATATYPE)) { |
| /* A lot of the code below assumes this condition, so error out if it's not met */ |
| DEBUG_PRINT_ERROR("Extradata ABI mismatch"); |
| return false; |
| } |
| |
| struct msm_vidc_extradata_header *p_extradata = NULL; |
| do { |
| p_extradata = (struct msm_vidc_extradata_header *) (p_extradata ? |
| ((char *)p_extradata) + p_extradata->size : |
| extradata_info.uaddr + index * extradata_info.buffer_size); |
| |
| switch (p_extradata->type) { |
| case EXTRADATA_METADATA_MBI: |
| { |
| OMX_U32 payloadSize = append_mbi_extradata(&p_extra->data, p_extradata); |
| p_extra->nSize = ALIGN(sizeof(OMX_OTHER_EXTRADATATYPE) + payloadSize, 4); |
| p_extra->nVersion.nVersion = OMX_SPEC_VERSION; |
| p_extra->nPortIndex = OMX_DirOutput; |
| p_extra->eType = (OMX_EXTRADATATYPE)OMX_ExtraDataVideoEncoderMBInfo; |
| p_extra->nDataSize = payloadSize; |
| break; |
| } |
| case EXTRADATA_NONE: |
| p_extra->nSize = ALIGN(sizeof(OMX_OTHER_EXTRADATATYPE), 4); |
| p_extra->nVersion.nVersion = OMX_SPEC_VERSION; |
| p_extra->nPortIndex = OMX_DirOutput; |
| p_extra->eType = OMX_ExtraDataNone; |
| p_extra->nDataSize = 0; |
| break; |
| default: |
| /* No idea what this stuff is, just skip over it */ |
| DEBUG_PRINT_HIGH("Found an unrecognised extradata (%x) ignoring it", |
| p_extradata->type); |
| continue; |
| } |
| |
| p_extra = (OMX_OTHER_EXTRADATATYPE *)(((char *)p_extra) + p_extra->nSize); |
| } while (p_extradata->type != EXTRADATA_NONE); |
| |
| /* Just for debugging: Traverse the list of extra datas and spit it out onto log */ |
| p_extra = (OMX_OTHER_EXTRADATATYPE *)ALIGN(p_bufhdr->pBuffer + |
| p_bufhdr->nOffset + p_bufhdr->nFilledLen, 4); |
| while(p_extra->eType != OMX_ExtraDataNone) |
| { |
| DEBUG_PRINT_LOW("[%p/%d] found extradata type %x of size %d (%d) at %x", |
| p_bufhdr->pBuffer, p_bufhdr->nFilledLen, p_extra->eType, |
| p_extra->nSize, p_extra->nDataSize, p_extra); |
| |
| p_extra = (OMX_OTHER_EXTRADATATYPE *) (((OMX_U8 *) p_extra) + |
| p_extra->nSize); |
| } |
| |
| return true; |
| } |
| |
| int venc_dev::venc_set_format(int format) |
| { |
| int rc = true; |
| |
| if (format) |
| color_format = format; |
| else { |
| color_format = 0; |
| rc = false; |
| } |
| |
| return rc; |
| } |
| |
| OMX_ERRORTYPE venc_dev::allocate_extradata() |
| { |
| if (extradata_info.allocated) { |
| DEBUG_PRINT_ERROR("Extradata already allocated!"); |
| return OMX_ErrorNone; |
| } |
| |
| #ifdef USE_ION |
| |
| if (extradata_info.buffer_size) { |
| if (extradata_info.ion.ion_alloc_data.handle) { |
| munmap((void *)extradata_info.uaddr, extradata_info.size); |
| close(extradata_info.ion.fd_ion_data.fd); |
| venc_handle->free_ion_memory(&extradata_info.ion); |
| } |
| |
| extradata_info.size = ALIGN(extradata_info.size, SZ_4K); |
| |
| extradata_info.ion.ion_device_fd = venc_handle->alloc_map_ion_memory( |
| extradata_info.size, |
| &extradata_info.ion.ion_alloc_data, |
| &extradata_info.ion.fd_ion_data, 0); |
| |
| if (extradata_info.ion.ion_device_fd < 0) { |
| DEBUG_PRINT_ERROR("Failed to alloc extradata memory"); |
| return OMX_ErrorInsufficientResources; |
| } |
| |
| extradata_info.uaddr = (char *)mmap(NULL, |
| extradata_info.size, |
| PROT_READ|PROT_WRITE, MAP_SHARED, |
| extradata_info.ion.fd_ion_data.fd , 0); |
| |
| if (extradata_info.uaddr == MAP_FAILED) { |
| DEBUG_PRINT_ERROR("Failed to map extradata memory"); |
| close(extradata_info.ion.fd_ion_data.fd); |
| venc_handle->free_ion_memory(&extradata_info.ion); |
| return OMX_ErrorInsufficientResources; |
| } |
| } |
| |
| #endif |
| extradata_info.allocated = 1; |
| return OMX_ErrorNone; |
| } |
| |
| void venc_dev::free_extradata() |
| { |
| #ifdef USE_ION |
| |
| if (extradata_info.uaddr) { |
| munmap((void *)extradata_info.uaddr, extradata_info.size); |
| close(extradata_info.ion.fd_ion_data.fd); |
| venc_handle->free_ion_memory(&extradata_info.ion); |
| } |
| |
| memset(&extradata_info, 0, sizeof(extradata_info)); |
| #endif |
| } |
| |
| bool venc_dev::venc_get_output_log_flag() |
| { |
| return (m_debug.out_buffer_log == 1); |
| } |
| |
| int venc_dev::venc_output_log_buffers(const char *buffer_addr, int buffer_len) |
| { |
| if (venc_handle->is_secure_session()) { |
| DEBUG_PRINT_ERROR("logging secure output buffers is not allowed!"); |
| return -1; |
| } |
| |
| if (!m_debug.outfile) { |
| int size = 0; |
| if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| size = snprintf(m_debug.outfile_name, PROPERTY_VALUE_MAX, "%s/output_enc_%d_%d_%p.m4v", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| size = snprintf(m_debug.outfile_name, PROPERTY_VALUE_MAX, "%s/output_enc_%d_%d_%p.264", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| size = snprintf(m_debug.outfile_name, PROPERTY_VALUE_MAX, "%s/output_enc_%d_%d_%p.263", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| size = snprintf(m_debug.outfile_name, PROPERTY_VALUE_MAX, "%s/output_enc_%d_%d_%p.ivf", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } |
| if ((size > PROPERTY_VALUE_MAX) && (size < 0)) { |
| DEBUG_PRINT_ERROR("Failed to open output file: %s for logging size:%s", |
| m_debug.outfile_name, size); |
| } |
| m_debug.outfile = fopen(m_debug.outfile_name, "ab"); |
| if (!m_debug.outfile) { |
| DEBUG_PRINT_ERROR("Failed to open output file: %s for logging errno:%d", |
| m_debug.outfile_name, errno); |
| m_debug.outfile_name[0] = '\0'; |
| return -1; |
| } |
| } |
| if (m_debug.outfile && buffer_len) { |
| DEBUG_PRINT_LOW("%s buffer_len:%d", __func__, buffer_len); |
| fwrite(buffer_addr, buffer_len, 1, m_debug.outfile); |
| } |
| return 0; |
| } |
| |
| int venc_dev::venc_extradata_log_buffers(char *buffer_addr) |
| { |
| if (!m_debug.extradatafile && m_debug.extradata_log) { |
| int size = 0; |
| if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| size = snprintf(m_debug.extradatafile_name, PROPERTY_VALUE_MAX, "%s/extradata_enc_%d_%d_%p.m4v", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| size = snprintf(m_debug.extradatafile_name, PROPERTY_VALUE_MAX, "%s/extradata_enc_%d_%d_%p.264", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| size = snprintf(m_debug.extradatafile_name, PROPERTY_VALUE_MAX, "%s/extradata_enc_%d_%d_%p.263", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } else if(m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| size = snprintf(m_debug.extradatafile_name, PROPERTY_VALUE_MAX, "%s/extradata_enc_%d_%d_%p.ivf", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| } |
| if ((size > PROPERTY_VALUE_MAX) && (size < 0)) { |
| DEBUG_PRINT_ERROR("Failed to open extradata file: %s for logging size:%s", |
| m_debug.extradatafile_name, size); |
| } |
| |
| m_debug.extradatafile = fopen(m_debug.extradatafile_name, "ab"); |
| if (!m_debug.extradatafile) { |
| DEBUG_PRINT_ERROR("Failed to open extradata file: %s for logging errno:%d", |
| m_debug.extradatafile_name, errno); |
| m_debug.extradatafile_name[0] = '\0'; |
| return -1; |
| } |
| } |
| |
| if (m_debug.extradatafile) { |
| OMX_OTHER_EXTRADATATYPE *p_extra = NULL; |
| do { |
| p_extra = (OMX_OTHER_EXTRADATATYPE *)(!p_extra ? buffer_addr : |
| ((char *)p_extra) + p_extra->nSize); |
| fwrite(p_extra, p_extra->nSize, 1, m_debug.extradatafile); |
| } while (p_extra->eType != OMX_ExtraDataNone); |
| } |
| return 0; |
| } |
| |
| int venc_dev::venc_input_log_buffers(OMX_BUFFERHEADERTYPE *pbuffer, int fd, int plane_offset) { |
| if (venc_handle->is_secure_session()) { |
| DEBUG_PRINT_ERROR("logging secure input buffers is not allowed!"); |
| return -1; |
| } |
| |
| if (!m_debug.infile) { |
| int size = snprintf(m_debug.infile_name, PROPERTY_VALUE_MAX, "%s/input_enc_%d_%d_%p.yuv", |
| m_debug.log_loc, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, this); |
| if ((size > PROPERTY_VALUE_MAX) && (size < 0)) { |
| DEBUG_PRINT_ERROR("Failed to open output file: %s for logging size:%s", |
| m_debug.infile_name, size); |
| } |
| m_debug.infile = fopen (m_debug.infile_name, "ab"); |
| if (!m_debug.infile) { |
| DEBUG_PRINT_HIGH("Failed to open input file: %s for logging", m_debug.infile); |
| m_debug.infile_name[0] = '\0'; |
| return -1; |
| } |
| } |
| if (m_debug.infile && pbuffer && pbuffer->nFilledLen) { |
| int i,msize; |
| int stride = VENUS_Y_STRIDE(COLOR_FMT_NV12, m_sVenc_cfg.input_width); |
| int scanlines = VENUS_Y_SCANLINES(COLOR_FMT_NV12, m_sVenc_cfg.input_height); |
| unsigned char *pvirt,*ptemp; |
| |
| char *temp = (char *)pbuffer->pBuffer; |
| |
| msize = VENUS_BUFFER_SIZE(COLOR_FMT_NV12, m_sVenc_cfg.input_width, m_sVenc_cfg.input_height); |
| if (metadatamode == 1) { |
| pvirt= (unsigned char *)mmap(NULL, msize, PROT_READ|PROT_WRITE,MAP_SHARED, fd, plane_offset); |
| if (pvirt) { |
| ptemp = pvirt; |
| for (i = 0; i < m_sVenc_cfg.input_height; i++) { |
| fwrite(ptemp, m_sVenc_cfg.input_width, 1, m_debug.infile); |
| ptemp += stride; |
| } |
| ptemp = pvirt + (stride * scanlines); |
| for(i = 0; i < m_sVenc_cfg.input_height/2; i++) { |
| fwrite(ptemp, m_sVenc_cfg.input_width, 1, m_debug.infile); |
| ptemp += stride; |
| } |
| munmap(pvirt, msize); |
| } else if (pvirt == MAP_FAILED) { |
| DEBUG_PRINT_ERROR("%s mmap failed", __func__); |
| return -1; |
| } |
| } else { |
| for (i = 0; i < m_sVenc_cfg.input_height; i++) { |
| fwrite(temp, m_sVenc_cfg.input_width, 1, m_debug.infile); |
| temp += stride; |
| } |
| |
| temp = (char *)pbuffer->pBuffer + (stride * scanlines); |
| |
| for(i = 0; i < m_sVenc_cfg.input_height/2; i++) { |
| fwrite(temp, m_sVenc_cfg.input_width, 1, m_debug.infile); |
| temp += stride; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| bool venc_dev::venc_open(OMX_U32 codec) |
| { |
| int r; |
| unsigned int alignment = 0,buffer_size = 0, temp =0; |
| struct v4l2_control control; |
| OMX_STRING device_name = (OMX_STRING)"/dev/video33"; |
| |
| char platform_name[PROPERTY_VALUE_MAX]; |
| property_get("ro.board.platform", platform_name, "0"); |
| |
| if (!strncmp(platform_name, "msm8610", 7)) { |
| device_name = (OMX_STRING)"/dev/video35"; |
| } |
| |
| m_nDriver_fd = open (device_name, O_RDWR); |
| |
| if (m_nDriver_fd == 0) { |
| DEBUG_PRINT_ERROR("ERROR: Got fd as 0 for msm_vidc_enc, Opening again"); |
| m_nDriver_fd = open (device_name, O_RDWR); |
| } |
| |
| if ((int)m_nDriver_fd < 0) { |
| DEBUG_PRINT_ERROR("ERROR: Omx_venc::Comp Init Returning failure"); |
| return false; |
| } |
| DEBUG_PRINT_HIGH(" Open device %s returned fd %d", |
| device_name, m_nDriver_fd); |
| |
| // set the basic configuration of the video encoder driver |
| m_sVenc_cfg.input_width = OMX_CORE_QCIF_WIDTH; |
| m_sVenc_cfg.input_height= OMX_CORE_QCIF_HEIGHT; |
| m_sVenc_cfg.dvs_width = OMX_CORE_QCIF_WIDTH; |
| m_sVenc_cfg.dvs_height = OMX_CORE_QCIF_HEIGHT; |
| m_sVenc_cfg.fps_num = 30; |
| m_sVenc_cfg.fps_den = 1; |
| m_sVenc_cfg.targetbitrate = 64000; |
| m_sVenc_cfg.inputformat= V4L2_PIX_FMT_NV12; |
| m_codec = codec; |
| |
| if (codec == OMX_VIDEO_CodingMPEG4) { |
| m_sVenc_cfg.codectype = V4L2_PIX_FMT_MPEG4; |
| codec_profile.profile = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE; |
| profile_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_2; |
| session_qp_range.minqp = 1; |
| session_qp_range.maxqp = 31; |
| } else if (codec == OMX_VIDEO_CodingH263) { |
| m_sVenc_cfg.codectype = V4L2_PIX_FMT_H263; |
| codec_profile.profile = VEN_PROFILE_H263_BASELINE; |
| profile_level.level = VEN_LEVEL_H263_20; |
| session_qp_range.minqp = 1; |
| session_qp_range.maxqp = 31; |
| } else if (codec == OMX_VIDEO_CodingAVC) { |
| m_sVenc_cfg.codectype = V4L2_PIX_FMT_H264; |
| codec_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE; |
| profile_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1_0; |
| session_qp_range.minqp = 1; |
| session_qp_range.maxqp = 51; |
| } else if (codec == OMX_VIDEO_CodingVP8) { |
| m_sVenc_cfg.codectype = V4L2_PIX_FMT_VP8; |
| codec_profile.profile = V4L2_MPEG_VIDC_VIDEO_VP8_UNUSED; |
| profile_level.level = V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_0; |
| session_qp_range.minqp = 1; |
| session_qp_range.maxqp = 128; |
| } |
| session_qp_values.minqp = session_qp_range.minqp; |
| session_qp_values.maxqp = session_qp_range.maxqp; |
| |
| int ret; |
| ret = subscribe_to_events(m_nDriver_fd); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("Subscribe Event Failed"); |
| return false; |
| } |
| |
| struct v4l2_capability cap; |
| struct v4l2_fmtdesc fdesc; |
| struct v4l2_format fmt; |
| struct v4l2_requestbuffers bufreq; |
| |
| ret = ioctl(m_nDriver_fd, VIDIOC_QUERYCAP, &cap); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("Failed to query capabilities"); |
| } else { |
| DEBUG_PRINT_LOW("Capabilities: driver_name = %s, card = %s, bus_info = %s," |
| " version = %d, capabilities = %x", cap.driver, cap.card, |
| cap.bus_info, cap.version, cap.capabilities); |
| } |
| |
| ret=0; |
| fdesc.type=V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fdesc.index=0; |
| |
| while (ioctl(m_nDriver_fd, VIDIOC_ENUM_FMT, &fdesc) == 0) { |
| DEBUG_PRINT_LOW("fmt: description: %s, fmt: %x, flags = %x", fdesc.description, |
| fdesc.pixelformat, fdesc.flags); |
| fdesc.index++; |
| } |
| |
| fdesc.type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| fdesc.index=0; |
| |
| while (ioctl(m_nDriver_fd, VIDIOC_ENUM_FMT, &fdesc) == 0) { |
| DEBUG_PRINT_LOW("fmt: description: %s, fmt: %x, flags = %x", fdesc.description, |
| fdesc.pixelformat, fdesc.flags); |
| fdesc.index++; |
| } |
| |
| if (venc_handle->is_secure_session()) { |
| m_sOutput_buff_property.alignment = SZ_1M; |
| m_sInput_buff_property.alignment = SZ_1M; |
| } else { |
| m_sOutput_buff_property.alignment = SZ_4K; |
| m_sInput_buff_property.alignment = SZ_4K; |
| } |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.dvs_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.dvs_width; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.codectype; |
| |
| /*TODO: Return values not handled properly in this function anywhere. |
| * Need to handle those.*/ |
| ret = ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("Failed to set format on capture port"); |
| return false; |
| } |
| |
| m_sOutput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| |
| fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.input_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.input_width; |
| fmt.fmt.pix_mp.pixelformat = V4L2_PIX_FMT_NV12; |
| |
| ret = ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt); |
| m_sInput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = 2; |
| |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| ret = ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq); |
| m_sInput_buff_property.mincount = m_sInput_buff_property.actualcount = bufreq.count; |
| |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| bufreq.count = 2; |
| ret = ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq); |
| m_sOutput_buff_property.mincount = m_sOutput_buff_property.actualcount = bufreq.count; |
| |
| if(venc_handle->is_secure_session()) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_SECURE; |
| control.value = 1; |
| DEBUG_PRINT_HIGH("ioctl: open secure device"); |
| ret=ioctl(m_nDriver_fd, VIDIOC_S_CTRL,&control); |
| if (ret) { |
| DEBUG_PRINT_ERROR("ioctl: open secure dev fail, rc %d", ret); |
| return false; |
| } |
| } |
| |
| resume_in_stopped = 0; |
| metadatamode = 0; |
| |
| control.id = V4L2_CID_MPEG_VIDEO_HEADER_MODE; |
| control.value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL to disable seq_hdr in sync_frame id=%d, val=%d", control.id, control.value); |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| |
| struct v4l2_frmsizeenum frmsize; |
| |
| //Get the hardware capabilities |
| memset((void *)&frmsize,0,sizeof(frmsize)); |
| frmsize.index = 0; |
| frmsize.pixel_format = m_sVenc_cfg.codectype; |
| ret = ioctl(m_nDriver_fd, VIDIOC_ENUM_FRAMESIZES, &frmsize); |
| |
| if (ret || frmsize.type != V4L2_FRMSIZE_TYPE_STEPWISE) { |
| DEBUG_PRINT_ERROR("Failed to get framesizes"); |
| return false; |
| } |
| |
| if (frmsize.type == V4L2_FRMSIZE_TYPE_STEPWISE) { |
| capability.min_width = frmsize.stepwise.min_width; |
| capability.max_width = frmsize.stepwise.max_width; |
| capability.min_height = frmsize.stepwise.min_height; |
| capability.max_height = frmsize.stepwise.max_height; |
| } |
| //Initialize non-default parameters |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_NUM_P_FRAMES; |
| control.value = 0x7fffffff; |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) |
| DEBUG_PRINT_ERROR("Failed to set V4L2_CID_MPEG_VIDC_VIDEO_NUM_P_FRAMES"); |
| } |
| |
| sess_priority.priority = 1; /* default to non-real-time */ |
| if (!venc_set_session_priority(sess_priority.priority)) { |
| DEBUG_PRINT_ERROR("Setting session priority failed"); |
| return OMX_ErrorUnsupportedSetting; |
| } |
| |
| return true; |
| } |
| |
| |
| static OMX_ERRORTYPE unsubscribe_to_events(int fd) |
| { |
| OMX_ERRORTYPE eRet = OMX_ErrorNone; |
| struct v4l2_event_subscription sub; |
| int array_sz = sizeof(event_type)/sizeof(int); |
| int i,rc; |
| |
| if (fd < 0) { |
| DEBUG_PRINT_ERROR("Invalid input: %d", fd); |
| return OMX_ErrorBadParameter; |
| } |
| |
| for (i = 0; i < array_sz; ++i) { |
| memset(&sub, 0, sizeof(sub)); |
| sub.type = event_type[i]; |
| rc = ioctl(fd, VIDIOC_UNSUBSCRIBE_EVENT, &sub); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to unsubscribe event: 0x%x", sub.type); |
| break; |
| } |
| } |
| |
| return eRet; |
| } |
| |
| void venc_dev::venc_close() |
| { |
| struct v4l2_encoder_cmd enc; |
| DEBUG_PRINT_LOW("venc_close: fd = %lu", m_nDriver_fd); |
| |
| if ((int)m_nDriver_fd >= 0) { |
| enc.cmd = V4L2_ENC_CMD_STOP; |
| ioctl(m_nDriver_fd, VIDIOC_ENCODER_CMD, &enc); |
| DEBUG_PRINT_HIGH("venc_close E"); |
| |
| if (async_thread_created) |
| pthread_join(m_tid,NULL); |
| |
| DEBUG_PRINT_HIGH("venc_close X"); |
| unsubscribe_to_events(m_nDriver_fd); |
| close(m_nDriver_fd); |
| m_nDriver_fd = -1; |
| } |
| |
| if (m_debug.infile) { |
| fclose(m_debug.infile); |
| m_debug.infile = NULL; |
| } |
| |
| if (m_debug.outfile) { |
| fclose(m_debug.outfile); |
| m_debug.outfile = NULL; |
| } |
| |
| if (m_debug.extradatafile) { |
| fclose(m_debug.extradatafile); |
| m_debug.extradatafile = NULL; |
| } |
| } |
| |
| bool venc_dev::venc_set_buf_req(unsigned long *min_buff_count, |
| unsigned long *actual_buff_count, |
| unsigned long *buff_size, |
| unsigned long port) |
| { |
| |
| unsigned long temp_count = 0; |
| |
| if (port == 0) { |
| if (*actual_buff_count > m_sInput_buff_property.mincount) { |
| temp_count = m_sInput_buff_property.actualcount; |
| m_sInput_buff_property.actualcount = *actual_buff_count; |
| DEBUG_PRINT_LOW("I/P Count set to %lu", *actual_buff_count); |
| } |
| } else { |
| if (*actual_buff_count > m_sOutput_buff_property.mincount) { |
| temp_count = m_sOutput_buff_property.actualcount; |
| m_sOutput_buff_property.actualcount = *actual_buff_count; |
| DEBUG_PRINT_LOW("O/P Count set to %lu", *actual_buff_count); |
| } |
| } |
| |
| return true; |
| |
| } |
| |
| bool venc_dev::venc_loaded_start() |
| { |
| return true; |
| } |
| |
| bool venc_dev::venc_loaded_stop() |
| { |
| return true; |
| } |
| |
| bool venc_dev::venc_loaded_start_done() |
| { |
| return true; |
| } |
| |
| bool venc_dev::venc_loaded_stop_done() |
| { |
| return true; |
| } |
| |
| bool venc_dev::venc_get_seq_hdr(void *buffer, |
| unsigned buffer_size, unsigned *header_len) |
| { |
| return true; |
| } |
| |
| bool venc_dev::venc_get_buf_req(unsigned long *min_buff_count, |
| unsigned long *actual_buff_count, |
| unsigned long *buff_size, |
| unsigned long port) |
| { |
| struct v4l2_format fmt; |
| struct v4l2_requestbuffers bufreq; |
| unsigned int buf_size = 0, extra_data_size = 0, client_extra_data_size = 0; |
| int ret; |
| |
| if (port == 0) { |
| fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.input_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.input_width; |
| fmt.fmt.pix_mp.pixelformat = V4L2_PIX_FMT_NV12; |
| ret = ioctl(m_nDriver_fd, VIDIOC_G_FMT, &fmt); |
| m_sInput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| |
| if (*actual_buff_count) |
| bufreq.count = *actual_buff_count; |
| else |
| bufreq.count = 2; |
| |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| ret = ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("VIDIOC_REQBUFS OUTPUT_MPLANE Failed"); |
| return false; |
| } |
| |
| m_sInput_buff_property.mincount = m_sInput_buff_property.actualcount = bufreq.count; |
| *min_buff_count = m_sInput_buff_property.mincount; |
| *actual_buff_count = m_sInput_buff_property.actualcount; |
| #ifdef USE_ION |
| // For ION memory allocations of the allocated buffer size |
| // must be 4k aligned, hence aligning the input buffer |
| // size to 4k. |
| m_sInput_buff_property.datasize = ALIGN(m_sInput_buff_property.datasize, SZ_4K); |
| #endif |
| *buff_size = m_sInput_buff_property.datasize; |
| } else { |
| unsigned int extra_idx = 0; |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.dvs_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.dvs_width; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.codectype; |
| |
| ret = ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt); |
| m_sOutput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.dvs_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.dvs_width; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.codectype; |
| |
| ret = ioctl(m_nDriver_fd, VIDIOC_G_FMT, &fmt); |
| m_sOutput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| |
| if (*actual_buff_count) |
| bufreq.count = *actual_buff_count; |
| else |
| bufreq.count = 2; |
| |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| ret = ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("VIDIOC_REQBUFS CAPTURE_MPLANE Failed"); |
| return false; |
| } |
| |
| m_sOutput_buff_property.mincount = m_sOutput_buff_property.actualcount = bufreq.count; |
| *min_buff_count = m_sOutput_buff_property.mincount; |
| *actual_buff_count = m_sOutput_buff_property.actualcount; |
| *buff_size = m_sOutput_buff_property.datasize; |
| num_planes = fmt.fmt.pix_mp.num_planes; |
| extra_idx = EXTRADATA_IDX(num_planes); |
| |
| if (extra_idx && (extra_idx < VIDEO_MAX_PLANES)) { |
| extra_data_size = fmt.fmt.pix_mp.plane_fmt[extra_idx].sizeimage; |
| } else if (extra_idx >= VIDEO_MAX_PLANES) { |
| DEBUG_PRINT_ERROR("Extradata index is more than allowed: %d", extra_idx); |
| return OMX_ErrorBadParameter; |
| } |
| |
| extradata_info.buffer_size = extra_data_size; |
| extradata_info.count = m_sOutput_buff_property.actualcount; |
| extradata_info.size = extradata_info.buffer_size * extradata_info.count; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_param(void *paramData, OMX_INDEXTYPE index) |
| { |
| DEBUG_PRINT_LOW("venc_set_param:: venc-720p"); |
| struct v4l2_format fmt; |
| struct v4l2_requestbuffers bufreq; |
| int ret; |
| |
| switch ((int)index) { |
| case OMX_IndexParamPortDefinition: |
| { |
| OMX_PARAM_PORTDEFINITIONTYPE *portDefn; |
| portDefn = (OMX_PARAM_PORTDEFINITIONTYPE *) paramData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexParamPortDefinition"); |
| |
| if (portDefn->nPortIndex == PORT_INDEX_IN) { |
| if (!venc_set_encode_framerate(portDefn->format.video.xFramerate, 0)) { |
| return false; |
| } |
| |
| if (!venc_set_color_format(portDefn->format.video.eColorFormat)) { |
| return false; |
| } |
| |
| if (m_sVenc_cfg.input_height != portDefn->format.video.nFrameHeight || |
| m_sVenc_cfg.input_width != portDefn->format.video.nFrameWidth) { |
| DEBUG_PRINT_LOW("Basic parameter has changed"); |
| m_sVenc_cfg.input_height = portDefn->format.video.nFrameHeight; |
| m_sVenc_cfg.input_width = portDefn->format.video.nFrameWidth; |
| fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.input_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.input_width; |
| fmt.fmt.pix_mp.pixelformat = V4L2_PIX_FMT_NV12; |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt)) { |
| DEBUG_PRINT_ERROR("VIDIOC_S_FMT OUTPUT_MPLANE Failed"); |
| hw_overload = errno == EBUSY; |
| return false; |
| } |
| |
| m_sInput_buff_property.datasize=fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = portDefn->nBufferCountActual; |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| |
| if (ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq)) { |
| DEBUG_PRINT_ERROR("VIDIOC_REQBUFS OUTPUT_MPLANE Failed"); |
| return false; |
| } |
| |
| if (bufreq.count == portDefn->nBufferCountActual) |
| m_sInput_buff_property.mincount = m_sInput_buff_property.actualcount = bufreq.count; |
| |
| if (portDefn->nBufferCountActual >= m_sInput_buff_property.mincount) |
| m_sInput_buff_property.actualcount = portDefn->nBufferCountActual; |
| } |
| |
| DEBUG_PRINT_LOW("input: actual: %lu, min: %lu, count_req: %u", |
| portDefn->nBufferCountActual, m_sInput_buff_property.mincount, bufreq.count); |
| } else if (portDefn->nPortIndex == PORT_INDEX_OUT) { |
| m_sVenc_cfg.dvs_height = portDefn->format.video.nFrameHeight; |
| m_sVenc_cfg.dvs_width = portDefn->format.video.nFrameWidth; |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.dvs_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.dvs_width; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.codectype; |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt)) { |
| DEBUG_PRINT_ERROR("VIDIOC_S_FMT CAPTURE_MPLANE Failed"); |
| hw_overload = errno == EBUSY; |
| return false; |
| } |
| |
| m_sOutput_buff_property.datasize = fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| |
| if (!venc_set_target_bitrate(portDefn->format.video.nBitrate, 0)) { |
| return false; |
| } |
| |
| m_sOutput_buff_property.actualcount = portDefn->nBufferCountActual; |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = portDefn->nBufferCountActual; |
| bufreq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| |
| if (ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting o/p buffer count failed: requested: %lu, current: %lu", |
| portDefn->nBufferCountActual, m_sOutput_buff_property.actualcount); |
| return false; |
| } |
| |
| if (bufreq.count == portDefn->nBufferCountActual) |
| m_sOutput_buff_property.mincount = m_sOutput_buff_property.actualcount = bufreq.count; |
| |
| if (portDefn->nBufferCountActual >= m_sOutput_buff_property.mincount) |
| m_sOutput_buff_property.actualcount = portDefn->nBufferCountActual; |
| |
| if (num_planes > 1) |
| extradata_info.count = m_sOutput_buff_property.actualcount; |
| |
| DEBUG_PRINT_LOW("Output: actual: %lu, min: %lu, count_req: %u", |
| portDefn->nBufferCountActual, m_sOutput_buff_property.mincount, bufreq.count); |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamPortDefinition"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoPortFormat: |
| { |
| OMX_VIDEO_PARAM_PORTFORMATTYPE *portFmt; |
| portFmt =(OMX_VIDEO_PARAM_PORTFORMATTYPE *)paramData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexParamVideoPortFormat"); |
| |
| if (portFmt->nPortIndex == (OMX_U32) PORT_INDEX_IN) { |
| if (!venc_set_color_format(portFmt->eColorFormat)) { |
| return false; |
| } |
| } else if (portFmt->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (!venc_set_encode_framerate(portFmt->xFramerate, 0)) { |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoPortFormat"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoBitrate: |
| { |
| OMX_VIDEO_PARAM_BITRATETYPE* pParam; |
| pParam = (OMX_VIDEO_PARAM_BITRATETYPE*)paramData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexParamVideoBitrate"); |
| |
| if (pParam->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (!venc_set_target_bitrate(pParam->nTargetBitrate, 0)) { |
| DEBUG_PRINT_ERROR("ERROR: Target Bit Rate setting failed"); |
| return false; |
| } |
| |
| if (!venc_set_ratectrl_cfg(pParam->eControlRate)) { |
| DEBUG_PRINT_ERROR("ERROR: Rate Control setting failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoBitrate"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoMpeg4: |
| { |
| OMX_VIDEO_PARAM_MPEG4TYPE* pParam; |
| OMX_U32 bFrames = 0; |
| |
| pParam = (OMX_VIDEO_PARAM_MPEG4TYPE*)paramData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexParamVideoMpeg4"); |
| |
| if (pParam->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (!venc_set_voptiming_cfg(pParam->nTimeIncRes)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting vop_timing failed"); |
| return false; |
| } |
| |
| m_profile_set = false; |
| m_level_set = false; |
| |
| if (!venc_set_profile_level (pParam->eProfile, pParam->eLevel)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsuccessful in updating Profile and level"); |
| return false; |
| } else { |
| if (pParam->eProfile == OMX_VIDEO_MPEG4ProfileAdvancedSimple) { |
| if (pParam->nBFrames) { |
| DEBUG_PRINT_HIGH("INFO: Only 1 Bframe is supported"); |
| bFrames = 1; |
| } |
| } else { |
| if (pParam->nBFrames) { |
| DEBUG_PRINT_ERROR("Warning: B frames not supported"); |
| bFrames = 0; |
| } |
| } |
| } |
| |
| if (!venc_set_intra_period (pParam->nPFrames,bFrames)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting intra period failed"); |
| return false; |
| } |
| |
| if (!venc_set_multislice_cfg(OMX_IndexParamVideoMpeg4,pParam->nSliceHeaderSpacing)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsuccessful in updating slice_config"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoMpeg4"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoH263: |
| { |
| OMX_VIDEO_PARAM_H263TYPE* pParam = (OMX_VIDEO_PARAM_H263TYPE*)paramData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexParamVideoH263"); |
| OMX_U32 bFrames = 0; |
| |
| if (pParam->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| m_profile_set = false; |
| m_level_set = false; |
| |
| if (!venc_set_profile_level (pParam->eProfile, pParam->eLevel)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsuccessful in updating Profile and level"); |
| return false; |
| } |
| |
| if (pParam->nBFrames) |
| DEBUG_PRINT_ERROR("WARNING: B frame not supported for H.263"); |
| |
| if (venc_set_intra_period (pParam->nPFrames, bFrames) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting intra period failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoH263"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoAvc: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoAvc"); |
| OMX_VIDEO_PARAM_AVCTYPE* pParam = (OMX_VIDEO_PARAM_AVCTYPE*)paramData; |
| OMX_U32 bFrames = 0; |
| |
| if (pParam->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| DEBUG_PRINT_LOW("pParam->eProfile :%d ,pParam->eLevel %d", |
| pParam->eProfile,pParam->eLevel); |
| |
| m_profile_set = false; |
| m_level_set = false; |
| |
| if (!venc_set_profile_level (pParam->eProfile,pParam->eLevel)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsuccessful in updating Profile and level %d, %d", |
| pParam->eProfile, pParam->eLevel); |
| return false; |
| } else { |
| if ((pParam->eProfile != OMX_VIDEO_AVCProfileBaseline) && |
| (pParam->eProfile != QOMX_VIDEO_AVCProfileConstrainedBaseline)) { |
| if (pParam->nBFrames) { |
| DEBUG_PRINT_HIGH("INFO: Only 1 Bframe is supported"); |
| bFrames = 1; |
| } |
| } else { |
| if (pParam->nBFrames) { |
| DEBUG_PRINT_ERROR("Warning: B frames not supported"); |
| bFrames = 0; |
| } |
| } |
| } |
| |
| if (!venc_set_intra_period (pParam->nPFrames, bFrames)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting intra period failed"); |
| return false; |
| } |
| |
| if (!venc_set_entropy_config (pParam->bEntropyCodingCABAC, pParam->nCabacInitIdc)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting Entropy failed"); |
| return false; |
| } |
| |
| if (!venc_set_inloop_filter (pParam->eLoopFilterMode)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting Inloop filter failed"); |
| return false; |
| } |
| |
| if (!venc_set_multislice_cfg(OMX_IndexParamVideoAvc, pParam->nSliceHeaderSpacing)) { |
| DEBUG_PRINT_ERROR("WARNING: Unsuccessful in updating slice_config"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoAvc"); |
| } |
| |
| //TBD, lot of other variables to be updated, yet to decide |
| break; |
| } |
| case (OMX_INDEXTYPE)OMX_IndexParamVideoVp8: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoVp8"); |
| OMX_VIDEO_PARAM_VP8TYPE* pParam = (OMX_VIDEO_PARAM_VP8TYPE*)paramData; |
| if (!venc_set_profile_level (pParam->eProfile, pParam->eLevel)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsuccessful in updating Profile and level %d, %d", |
| pParam->eProfile, pParam->eLevel); |
| return false; |
| } |
| |
| if(!venc_set_ltrmode(1, 1)) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to enable ltrmode"); |
| return false; |
| } |
| |
| // For VP8, hier-p and ltr are mutually exclusive features in firmware |
| // Disable hier-p if ltr is enabled. |
| if (m_codec == OMX_VIDEO_CodingVP8) { |
| DEBUG_PRINT_LOW("Disable Hier-P as LTR is being set"); |
| if (!venc_set_hier_layers(QOMX_HIERARCHICALCODING_P, 0)) { |
| DEBUG_PRINT_ERROR("Disabling Hier P count failed"); |
| } |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoIntraRefresh: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoIntraRefresh"); |
| OMX_VIDEO_PARAM_INTRAREFRESHTYPE *intra_refresh = |
| (OMX_VIDEO_PARAM_INTRAREFRESHTYPE *)paramData; |
| |
| if (intra_refresh->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (venc_set_intra_refresh(intra_refresh->eRefreshMode, intra_refresh->nCirMBs) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Intra refresh failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoIntraRefresh"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoErrorCorrection: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoErrorCorrection"); |
| OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE *error_resilience = |
| (OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE *)paramData; |
| |
| if (error_resilience->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (venc_set_error_resilience(error_resilience) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Intra refresh failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoErrorCorrection"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoProfileLevelCurrent: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoProfileLevelCurrent"); |
| OMX_VIDEO_PARAM_PROFILELEVELTYPE *profile_level = |
| (OMX_VIDEO_PARAM_PROFILELEVELTYPE *)paramData; |
| |
| if (profile_level->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| m_profile_set = false; |
| m_level_set = false; |
| |
| if (!venc_set_profile_level (profile_level->eProfile, |
| profile_level->eLevel)) { |
| DEBUG_PRINT_ERROR("WARNING: Unsuccessful in updating Profile and level"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoProfileLevelCurrent"); |
| } |
| |
| break; |
| } |
| case OMX_IndexParamVideoQuantization: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_IndexParamVideoQuantization"); |
| OMX_VIDEO_PARAM_QUANTIZATIONTYPE *session_qp = |
| (OMX_VIDEO_PARAM_QUANTIZATIONTYPE *)paramData; |
| |
| if (session_qp->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (venc_set_session_qp (session_qp->nQpI, |
| session_qp->nQpP, |
| session_qp->nQpB) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Session QP failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexParamVideoQuantization"); |
| } |
| |
| break; |
| } |
| case QOMX_IndexParamVideoInitialQp: |
| { |
| QOMX_EXTNINDEX_VIDEO_INITIALQP * initqp = |
| (QOMX_EXTNINDEX_VIDEO_INITIALQP *)paramData; |
| if (initqp->bEnableInitQp) { |
| DEBUG_PRINT_LOW("Enable initial QP: %d", initqp->bEnableInitQp); |
| if(venc_enable_initial_qp(initqp) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to enable initial QP"); |
| return OMX_ErrorUnsupportedSetting; |
| } |
| } else |
| DEBUG_PRINT_ERROR("ERROR: setting QOMX_IndexParamVideoEnableInitialQp"); |
| break; |
| } |
| case OMX_QcomIndexParamVideoQPRange: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:OMX_QcomIndexParamVideoQPRange\n"); |
| OMX_QCOM_VIDEO_PARAM_QPRANGETYPE *session_qp_range = |
| (OMX_QCOM_VIDEO_PARAM_QPRANGETYPE *)paramData; |
| |
| if(session_qp_range->nPortIndex == (OMX_U32)PORT_INDEX_OUT) { |
| if(venc_set_session_qp_range (session_qp_range->minQP, |
| session_qp_range->maxQP) == false) { |
| DEBUG_PRINT_ERROR("\nERROR: Setting QP Range[%d %d] failed", |
| session_qp_range->minQP, session_qp_range->maxQP); |
| return false; |
| } else { |
| session_qp_values.minqp = session_qp_range->minQP; |
| session_qp_values.maxqp = session_qp_range->maxQP; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("\nERROR: Invalid Port Index for OMX_QcomIndexParamVideoQPRange"); |
| } |
| |
| break; |
| } |
| case OMX_QcomIndexEnableSliceDeliveryMode: |
| { |
| QOMX_EXTNINDEX_PARAMTYPE* pParam = |
| (QOMX_EXTNINDEX_PARAMTYPE*)paramData; |
| |
| if (pParam->nPortIndex == PORT_INDEX_OUT) { |
| if (venc_set_slice_delivery_mode(pParam->bEnable) == false) { |
| DEBUG_PRINT_ERROR("Setting slice delivery mode failed"); |
| return OMX_ErrorUnsupportedSetting; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("OMX_QcomIndexEnableSliceDeliveryMode " |
| "called on wrong port(%lu)", pParam->nPortIndex); |
| return OMX_ErrorBadPortIndex; |
| } |
| |
| break; |
| } |
| case OMX_ExtraDataVideoEncoderSliceInfo: |
| { |
| DEBUG_PRINT_LOW("venc_set_param: OMX_ExtraDataVideoEncoderSliceInfo"); |
| OMX_BOOL extra_data = *(OMX_BOOL *)(¶mData); |
| |
| if (venc_set_extradata(OMX_ExtraDataVideoEncoderSliceInfo, extra_data) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting OMX_ExtraDataVideoEncoderSliceInfo failed"); |
| return false; |
| } |
| |
| extradata = true; |
| break; |
| } |
| case OMX_ExtraDataVideoEncoderMBInfo: |
| { |
| DEBUG_PRINT_LOW("venc_set_param: OMX_ExtraDataVideoEncoderMBInfo"); |
| OMX_BOOL extra_data = *(OMX_BOOL *)(¶mData); |
| |
| if (venc_set_extradata(OMX_ExtraDataVideoEncoderMBInfo, extra_data) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting OMX_ExtraDataVideoEncoderMBInfo failed"); |
| return false; |
| } |
| |
| extradata = true; |
| break; |
| } |
| case OMX_QcomIndexParamSequenceHeaderWithIDR: |
| { |
| PrependSPSPPSToIDRFramesParams * pParam = |
| (PrependSPSPPSToIDRFramesParams *)paramData; |
| |
| DEBUG_PRINT_LOW("set inband sps/pps: %d", pParam->bEnable); |
| if(venc_set_inband_video_header(pParam->bEnable) == false) { |
| DEBUG_PRINT_ERROR("ERROR: set inband sps/pps failed"); |
| return OMX_ErrorUnsupportedSetting; |
| } |
| |
| break; |
| } |
| case OMX_QcomIndexParamH264AUDelimiter: |
| { |
| OMX_QCOM_VIDEO_CONFIG_H264_AUD * pParam = |
| (OMX_QCOM_VIDEO_CONFIG_H264_AUD *)paramData; |
| |
| DEBUG_PRINT_LOW("set AU delimiters: %d", pParam->bEnable); |
| if(venc_set_au_delimiter(pParam->bEnable) == false) { |
| DEBUG_PRINT_ERROR("ERROR: set H264 AU delimiter failed"); |
| return OMX_ErrorUnsupportedSetting; |
| } |
| |
| break; |
| } |
| case OMX_QcomIndexHierarchicalStructure: |
| { |
| QOMX_VIDEO_HIERARCHICALLAYERS* pParam = |
| (QOMX_VIDEO_HIERARCHICALLAYERS*)paramData; |
| |
| if (pParam->nPortIndex == PORT_INDEX_OUT) { |
| if (!venc_set_hier_layers(pParam->eHierarchicalCodingType, pParam->nNumLayers)) { |
| DEBUG_PRINT_ERROR("Setting Hier P count failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("OMX_QcomIndexHierarchicalStructure called on wrong port(%d)", pParam->nPortIndex); |
| return false; |
| } |
| |
| // For VP8, hier-p and ltr are mutually exclusive features in firmware |
| // Disable ltr if hier-p is enabled. |
| if (m_codec == OMX_VIDEO_CodingVP8) { |
| DEBUG_PRINT_LOW("Disable LTR as HIER-P is being set"); |
| if(!venc_set_ltrmode(0, 1)) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to disable ltrmode"); |
| } |
| } |
| break; |
| } |
| case OMX_QcomIndexParamVideoLTRCount: |
| { |
| DEBUG_PRINT_LOW("venc_set_param: OMX_QcomIndexParamVideoLTRCount"); |
| OMX_QCOM_VIDEO_PARAM_LTRCOUNT_TYPE* pParam = |
| (OMX_QCOM_VIDEO_PARAM_LTRCOUNT_TYPE*)paramData; |
| if (pParam->nCount > 0) { |
| if (venc_set_ltrmode(1, pParam->nCount) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Enable LTR mode failed"); |
| return false; |
| } |
| } else { |
| if (venc_set_ltrmode(0, 0) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Disable LTR mode failed"); |
| return false; |
| } |
| } |
| break; |
| } |
| case OMX_QcomIndexParamPerfLevel: |
| { |
| OMX_QCOM_VIDEO_PARAM_PERF_LEVEL *pParam = |
| (OMX_QCOM_VIDEO_PARAM_PERF_LEVEL *)paramData; |
| DEBUG_PRINT_LOW("Set perf level: %d\n", pParam->ePerfLevel); |
| if (venc_set_perf_level(pParam->ePerfLevel) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to set perf level to %d", pParam->ePerfLevel); |
| return false; |
| } else { |
| performance_level.perflevel = (unsigned int) pParam->ePerfLevel; |
| } |
| break; |
| } |
| case OMX_QcomIndexParamH264VUITimingInfo: |
| { |
| OMX_QCOM_VIDEO_PARAM_VUI_TIMING_INFO *pParam = |
| (OMX_QCOM_VIDEO_PARAM_VUI_TIMING_INFO *)paramData; |
| DEBUG_PRINT_LOW("Set VUI timing info: %d\n", pParam->bEnable); |
| if (venc_set_vui_timing_info(pParam->bEnable) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to set vui timing info to %d", pParam->bEnable); |
| return false; |
| } else { |
| vui_timing_info.enabled = (unsigned int) pParam->bEnable; |
| } |
| break; |
| } |
| case OMX_QcomIndexParamPeakBitrate: |
| { |
| OMX_QCOM_VIDEO_PARAM_PEAK_BITRATE *pParam = |
| (OMX_QCOM_VIDEO_PARAM_PEAK_BITRATE *)paramData; |
| DEBUG_PRINT_LOW("Set peak bitrate: %lu\n", pParam->nPeakBitrate); |
| if (venc_set_peak_bitrate(pParam->nPeakBitrate) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Failed to set peak bitrate to %lu", pParam->nPeakBitrate); |
| return false; |
| } else { |
| peak_bitrate.peakbitrate = (unsigned int) pParam->nPeakBitrate; |
| } |
| break; |
| } |
| case OMX_IndexParamVideoSliceFMO: |
| default: |
| DEBUG_PRINT_ERROR("ERROR: Unsupported parameter in venc_set_param: %u", |
| index); |
| break; |
| //case |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_config(void *configData, OMX_INDEXTYPE index) |
| { |
| |
| DEBUG_PRINT_LOW("Inside venc_set_config"); |
| |
| switch ((int)index) { |
| case OMX_IndexConfigVideoBitrate: |
| { |
| OMX_VIDEO_CONFIG_BITRATETYPE *bit_rate = (OMX_VIDEO_CONFIG_BITRATETYPE *) |
| configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_IndexConfigVideoBitrate"); |
| |
| if (bit_rate->nPortIndex == (OMX_U32)PORT_INDEX_OUT) { |
| if (venc_set_target_bitrate(bit_rate->nEncodeBitrate, 1) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Target Bit rate failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexConfigVideoBitrate"); |
| } |
| |
| break; |
| } |
| case OMX_IndexConfigVideoFramerate: |
| { |
| OMX_CONFIG_FRAMERATETYPE *frame_rate = (OMX_CONFIG_FRAMERATETYPE *) |
| configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_IndexConfigVideoFramerate"); |
| |
| if (frame_rate->nPortIndex == (OMX_U32)PORT_INDEX_OUT) { |
| if (venc_set_encode_framerate(frame_rate->xEncodeFramerate, 1) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Encode Framerate failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexConfigVideoFramerate"); |
| } |
| |
| break; |
| } |
| case QOMX_IndexConfigVideoIntraperiod: |
| { |
| DEBUG_PRINT_LOW("venc_set_param:QOMX_IndexConfigVideoIntraperiod"); |
| QOMX_VIDEO_INTRAPERIODTYPE *intraperiod = |
| (QOMX_VIDEO_INTRAPERIODTYPE *)configData; |
| |
| if (intraperiod->nPortIndex == (OMX_U32) PORT_INDEX_OUT) { |
| if (venc_set_intra_period(intraperiod->nPFrames, intraperiod->nBFrames) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting intra period failed"); |
| return false; |
| } |
| } |
| |
| break; |
| } |
| case OMX_IndexConfigVideoIntraVOPRefresh: |
| { |
| OMX_CONFIG_INTRAREFRESHVOPTYPE *intra_vop_refresh = (OMX_CONFIG_INTRAREFRESHVOPTYPE *) |
| configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_IndexConfigVideoIntraVOPRefresh"); |
| |
| if (intra_vop_refresh->nPortIndex == (OMX_U32)PORT_INDEX_OUT) { |
| if (venc_set_intra_vop_refresh(intra_vop_refresh->IntraRefreshVOP) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Encode Framerate failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexConfigVideoFramerate"); |
| } |
| |
| break; |
| } |
| case OMX_IndexConfigCommonRotate: |
| { |
| OMX_CONFIG_ROTATIONTYPE *config_rotation = |
| reinterpret_cast<OMX_CONFIG_ROTATIONTYPE*>(configData); |
| OMX_U32 nFrameWidth; |
| |
| if (!config_rotation) { |
| return false; |
| } |
| |
| if (config_rotation->nRotation && deinterlace_enabled) { |
| DEBUG_PRINT_ERROR("ERROR: Rotation is not supported with deinterlacing"); |
| return false; |
| } |
| DEBUG_PRINT_HIGH("venc_set_config: updating the new Dims"); |
| nFrameWidth = m_sVenc_cfg.dvs_width; |
| m_sVenc_cfg.dvs_width = m_sVenc_cfg.dvs_height; |
| m_sVenc_cfg.dvs_height = nFrameWidth; |
| |
| if(venc_set_vpe_rotation(config_rotation->nRotation) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Dimension Change for Rotation failed"); |
| return false; |
| } |
| |
| break; |
| } |
| case OMX_IndexConfigVideoAVCIntraPeriod: |
| { |
| OMX_VIDEO_CONFIG_AVCINTRAPERIOD *avc_iperiod = (OMX_VIDEO_CONFIG_AVCINTRAPERIOD*) configData; |
| DEBUG_PRINT_LOW("venc_set_param: OMX_IndexConfigVideoAVCIntraPeriod"); |
| |
| if (venc_set_idr_period(avc_iperiod->nPFrames, avc_iperiod->nIDRPeriod) |
| == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting " |
| "OMX_IndexConfigVideoAVCIntraPeriod failed"); |
| return false; |
| } |
| break; |
| } |
| case OMX_IndexConfigCommonDeinterlace: |
| { |
| OMX_VIDEO_CONFIG_DEINTERLACE *deinterlace = (OMX_VIDEO_CONFIG_DEINTERLACE *) configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_IndexConfigCommonDeinterlace"); |
| if (deinterlace && deinterlace->nPortIndex == (OMX_U32)PORT_INDEX_OUT) { |
| if (deinterlace->nEnable && (m_sVenc_cfg.dvs_width == m_sVenc_cfg.input_height && |
| m_sVenc_cfg.dvs_height == m_sVenc_cfg.input_width)) |
| { |
| DEBUG_PRINT_ERROR("ERROR: Deinterlace not supported with rotation"); |
| return false; |
| } |
| if (venc_set_deinterlace(deinterlace->nEnable) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting Deinterlace failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexConfigCommonDeinterlace"); |
| } |
| break; |
| } |
| case OMX_IndexConfigVideoVp8ReferenceFrame: |
| { |
| OMX_VIDEO_VP8REFERENCEFRAMETYPE* vp8refframe = (OMX_VIDEO_VP8REFERENCEFRAMETYPE*) configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_IndexConfigVideoVp8ReferenceFrame"); |
| if ((vp8refframe->nPortIndex == (OMX_U32)PORT_INDEX_IN) && |
| (vp8refframe->bUseGoldenFrame)) { |
| if(venc_set_useltr(0x1) == false) { |
| DEBUG_PRINT_ERROR("ERROR: use goldenframe failed"); |
| return false; |
| } |
| } else if((vp8refframe->nPortIndex == (OMX_U32)PORT_INDEX_IN) && |
| (vp8refframe->bGoldenFrameRefresh)) { |
| if(venc_set_markltr(0x1) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Setting goldenframe failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_IndexConfigVideoVp8ReferenceFrame"); |
| } |
| break; |
| } |
| case OMX_QcomIndexConfigVideoLTRUse: |
| { |
| OMX_QCOM_VIDEO_CONFIG_LTRUSE_TYPE* pParam = (OMX_QCOM_VIDEO_CONFIG_LTRUSE_TYPE*)configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_QcomIndexConfigVideoLTRUse"); |
| if (pParam->nPortIndex == (OMX_U32)PORT_INDEX_IN) { |
| if (venc_set_useltr(pParam->nID) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Use LTR failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_QcomIndexConfigVideoLTRUse"); |
| } |
| break; |
| } |
| case OMX_QcomIndexConfigVideoLTRMark: |
| { |
| OMX_QCOM_VIDEO_CONFIG_LTRMARK_TYPE* pParam = (OMX_QCOM_VIDEO_CONFIG_LTRMARK_TYPE*)configData; |
| DEBUG_PRINT_LOW("venc_set_config: OMX_QcomIndexConfigVideoLTRMark"); |
| if (pParam->nPortIndex == (OMX_U32)PORT_INDEX_IN) { |
| if (venc_set_markltr(pParam->nID) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Mark LTR failed"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid Port Index for OMX_QcomIndexConfigVideoLTRMark"); |
| } |
| break; |
| } |
| case OMX_IndexConfigPriority: |
| { |
| OMX_PARAM_U32TYPE *priority = (OMX_PARAM_U32TYPE *)configData; |
| DEBUG_PRINT_LOW("Set_config: priority %u",priority->nU32); |
| if (!venc_set_session_priority(priority->nU32)) { |
| DEBUG_PRINT_ERROR("Failed to set priority"); |
| return false; |
| } |
| break; |
| } |
| case OMX_IndexConfigOperatingRate: |
| { |
| OMX_PARAM_U32TYPE *rate = (OMX_PARAM_U32TYPE *)configData; |
| DEBUG_PRINT_LOW("Set_config: operating rate %d", rate->nU32); |
| if (!venc_set_operatingrate(rate->nU32)) { |
| DEBUG_PRINT_ERROR("Failed to set operating rate"); |
| return false; |
| } |
| break; |
| } |
| default: |
| DEBUG_PRINT_ERROR("Unsupported config index = %u", index); |
| break; |
| } |
| |
| return true; |
| } |
| |
| unsigned venc_dev::venc_stop( void) |
| { |
| struct venc_msg venc_msg; |
| struct v4l2_requestbuffers bufreq; |
| int rc = 0, ret = 0; |
| |
| if (!stopped) { |
| enum v4l2_buf_type cap_type; |
| |
| if (streaming[OUTPUT_PORT]) { |
| cap_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| rc = ioctl(m_nDriver_fd, VIDIOC_STREAMOFF, &cap_type); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to call streamoff on driver: capability: %d, %d", |
| cap_type, rc); |
| } else |
| streaming[OUTPUT_PORT] = false; |
| |
| DEBUG_PRINT_LOW("Releasing registered buffers from driver on o/p port"); |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = 0; |
| bufreq.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| ret = ioctl(m_nDriver_fd, VIDIOC_REQBUFS, &bufreq); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("ERROR: VIDIOC_REQBUFS OUTPUT MPLANE Failed"); |
| return false; |
| } |
| } |
| |
| if (!rc && streaming[CAPTURE_PORT]) { |
| cap_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| rc = ioctl(m_nDriver_fd, VIDIOC_STREAMOFF, &cap_type); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to call streamoff on driver: capability: %d, %d", |
| cap_type, rc); |
| } else |
| streaming[CAPTURE_PORT] = false; |
| |
| DEBUG_PRINT_LOW("Releasing registered buffers from driver on capture port"); |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = 0; |
| bufreq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| ret = ioctl(m_nDriver_fd, VIDIOC_REQBUFS, &bufreq); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("ERROR: VIDIOC_REQBUFS CAPTURE MPLANE Failed"); |
| return false; |
| } |
| } |
| |
| if (!rc && !ret) { |
| venc_stop_done(); |
| stopped = 1; |
| /*set flag to re-configure when started again*/ |
| resume_in_stopped = 1; |
| |
| } |
| } |
| |
| return rc; |
| } |
| |
| unsigned venc_dev::venc_pause(void) |
| { |
| pthread_mutex_lock(&pause_resume_mlock); |
| paused = true; |
| pthread_mutex_unlock(&pause_resume_mlock); |
| return 0; |
| } |
| |
| unsigned venc_dev::venc_resume(void) |
| { |
| pthread_mutex_lock(&pause_resume_mlock); |
| paused = false; |
| pthread_mutex_unlock(&pause_resume_mlock); |
| |
| return pthread_cond_signal(&pause_resume_cond); |
| } |
| |
| unsigned venc_dev::venc_start_done(void) |
| { |
| struct venc_msg venc_msg; |
| venc_msg.msgcode = VEN_MSG_START; |
| venc_msg.statuscode = VEN_S_SUCCESS; |
| venc_handle->async_message_process(venc_handle,&venc_msg); |
| return 0; |
| } |
| |
| unsigned venc_dev::venc_stop_done(void) |
| { |
| struct venc_msg venc_msg; |
| free_extradata(); |
| venc_msg.msgcode=VEN_MSG_STOP; |
| venc_msg.statuscode=VEN_S_SUCCESS; |
| venc_handle->async_message_process(venc_handle,&venc_msg); |
| return 0; |
| } |
| |
| unsigned venc_dev::venc_set_message_thread_id(pthread_t tid) |
| { |
| async_thread_created = true; |
| m_tid=tid; |
| return 0; |
| } |
| |
| |
| unsigned venc_dev::venc_start(void) |
| { |
| enum v4l2_buf_type buf_type; |
| int ret,r; |
| DEBUG_PRINT_HIGH("%s(): Check Profile/Level set in driver before start", |
| __func__); |
| m_level_set = false; |
| |
| if (!venc_set_profile_level(0, 0)) { |
| DEBUG_PRINT_ERROR("ERROR: %s(): Driver Profile/Level is NOT SET", |
| __func__); |
| } else { |
| DEBUG_PRINT_HIGH("%s(): Driver Profile[%lu]/Level[%lu] successfully SET", |
| __func__, codec_profile.profile, profile_level.level); |
| } |
| |
| venc_config_print(); |
| |
| if(resume_in_stopped){ |
| /*set buffercount when restarted*/ |
| venc_reconfig_reqbufs(); |
| resume_in_stopped = 0; |
| } |
| |
| /* Check if slice_delivery mode is enabled & max slices is sufficient for encoding complete frame */ |
| if (slice_mode.enable && multislice.mslice_size && |
| (m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)/(256 * multislice.mslice_size) >= MAX_SUPPORTED_SLICES_PER_FRAME) { |
| DEBUG_PRINT_ERROR("slice_mode: %lu, max slices (%lu) should be less than (%d)", slice_mode.enable, |
| (m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)/(256 * multislice.mslice_size), |
| MAX_SUPPORTED_SLICES_PER_FRAME); |
| return 1; |
| } |
| |
| buf_type=V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Executing"); |
| ret=ioctl(m_nDriver_fd, VIDIOC_STREAMON,&buf_type); |
| |
| if (ret) |
| return 1; |
| |
| streaming[CAPTURE_PORT] = true; |
| stopped = 0; |
| return 0; |
| } |
| |
| void venc_dev::venc_config_print() |
| { |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Codec: %ld, Profile %ld, level : %ld", |
| m_sVenc_cfg.codectype, codec_profile.profile, profile_level.level); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Input Width: %ld, Height:%ld, Fps: %ld", |
| m_sVenc_cfg.input_width, m_sVenc_cfg.input_height, |
| m_sVenc_cfg.fps_num/m_sVenc_cfg.fps_den); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Output Width: %ld, Height:%ld, Fps: %ld", |
| m_sVenc_cfg.dvs_width, m_sVenc_cfg.dvs_height, |
| m_sVenc_cfg.fps_num/m_sVenc_cfg.fps_den); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Bitrate: %ld, RC: %ld, I-Period: %ld", |
| bitrate.target_bitrate, rate_ctrl.rcmode, intra_period.num_pframes); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: qpI: %ld, qpP: %ld, qpb: %ld", |
| session_qp.iframeqp, session_qp.pframeqp, session_qp.bframeqp); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Init_qpI: %ld, Init_qpP: %ld, Init_qpb: %ld", |
| init_qp.iframeqp, init_qp.pframeqp, init_qp.bframeqp); |
| |
| DEBUG_PRINT_HIGH("\nENC_CONFIG: minQP: %d, maxQP: %d", |
| session_qp_values.minqp, session_qp_values.maxqp); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: VOP_Resolution: %ld, Slice-Mode: %ld, Slize_Size: %ld", |
| voptimecfg.voptime_resolution, multislice.mslice_mode, |
| multislice.mslice_size); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: EntropyMode: %d, CabacModel: %ld", |
| entropy.entropysel, entropy.cabacmodel); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: DB-Mode: %ld, alpha: %ld, Beta: %ld", |
| dbkfilter.db_mode, dbkfilter.slicealpha_offset, |
| dbkfilter.slicebeta_offset); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: IntraMB/Frame: %ld, HEC: %ld, IDR Period: %ld", |
| intra_refresh.mbcount, hec.header_extension, idrperiod.idrperiod); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Hier-P layers: %d", hier_p_layers.numlayers); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: LTR Enabled: %d, Count: %d", |
| ltrinfo.enabled, ltrinfo.count); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Performace level: %d", performance_level.perflevel); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: VUI timing info enabled: %d", vui_timing_info.enabled); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Peak bitrate: %d", peak_bitrate.peakbitrate); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Session Priority: %u", sess_priority.priority); |
| |
| DEBUG_PRINT_HIGH("ENC_CONFIG: Operating Rate: %u", operating_rate); |
| } |
| |
| bool venc_dev::venc_reconfig_reqbufs() |
| { |
| struct v4l2_requestbuffers bufreq; |
| |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = m_sInput_buff_property.actualcount; |
| bufreq.type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| if(ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq)) { |
| DEBUG_PRINT_ERROR("VIDIOC_REQBUFS OUTPUT_MPLANE Failed when resume"); |
| return false; |
| } |
| |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = m_sOutput_buff_property.actualcount; |
| bufreq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| if(ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq)) |
| { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting o/p buffer count failed when resume"); |
| return false; |
| } |
| return true; |
| } |
| |
| unsigned venc_dev::venc_flush( unsigned port) |
| { |
| struct v4l2_encoder_cmd enc; |
| DEBUG_PRINT_LOW("in %s", __func__); |
| |
| enc.cmd = V4L2_ENC_QCOM_CMD_FLUSH; |
| enc.flags = V4L2_QCOM_CMD_FLUSH_OUTPUT | V4L2_QCOM_CMD_FLUSH_CAPTURE; |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_ENCODER_CMD, &enc)) { |
| DEBUG_PRINT_ERROR("Flush Port (%d) Failed ", port); |
| return -1; |
| } |
| |
| return 0; |
| |
| } |
| |
| //allocating I/P memory from pmem and register with the device |
| |
| |
| bool venc_dev::venc_use_buf(void *buf_addr, unsigned port,unsigned index) |
| { |
| |
| struct pmem *pmem_tmp; |
| struct v4l2_buffer buf; |
| struct v4l2_plane plane[VIDEO_MAX_PLANES]; |
| int rc = 0; |
| unsigned int extra_idx; |
| |
| pmem_tmp = (struct pmem *)buf_addr; |
| DEBUG_PRINT_LOW("venc_use_buf:: pmem_tmp = %p", pmem_tmp); |
| |
| if (port == PORT_INDEX_IN) { |
| buf.index = index; |
| buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| buf.memory = V4L2_MEMORY_USERPTR; |
| plane[0].length = pmem_tmp->size; |
| plane[0].m.userptr = (unsigned long)pmem_tmp->buffer; |
| plane[0].reserved[0] = pmem_tmp->fd; |
| plane[0].reserved[1] = 0; |
| plane[0].data_offset = pmem_tmp->offset; |
| buf.m.planes = plane; |
| buf.length = 1; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_PREPARE_BUF, &buf); |
| |
| if (rc) |
| DEBUG_PRINT_LOW("VIDIOC_PREPARE_BUF Failed"); |
| } else if (port == PORT_INDEX_OUT) { |
| extra_idx = EXTRADATA_IDX(num_planes); |
| |
| if ((num_planes > 1) && (extra_idx)) { |
| rc = allocate_extradata(); |
| |
| if (rc) |
| DEBUG_PRINT_ERROR("Failed to allocate extradata: %d", rc); |
| } |
| |
| buf.index = index; |
| buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| buf.memory = V4L2_MEMORY_USERPTR; |
| plane[0].length = pmem_tmp->size; |
| plane[0].m.userptr = (unsigned long)pmem_tmp->buffer; |
| plane[0].reserved[0] = pmem_tmp->fd; |
| plane[0].reserved[1] = 0; |
| plane[0].data_offset = pmem_tmp->offset; |
| buf.m.planes = plane; |
| buf.length = num_planes; |
| |
| if (extra_idx && (extra_idx < VIDEO_MAX_PLANES)) { |
| plane[extra_idx].length = extradata_info.buffer_size; |
| plane[extra_idx].m.userptr = (unsigned long) (extradata_info.uaddr + index * extradata_info.buffer_size); |
| #ifdef USE_ION |
| plane[extra_idx].reserved[0] = extradata_info.ion.fd_ion_data.fd; |
| #endif |
| plane[extra_idx].reserved[1] = extradata_info.buffer_size * index; |
| plane[extra_idx].data_offset = 0; |
| } else if (extra_idx >= VIDEO_MAX_PLANES) { |
| DEBUG_PRINT_ERROR("Extradata index is more than allowed: %d", extra_idx); |
| return OMX_ErrorBadParameter; |
| } |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_PREPARE_BUF, &buf); |
| |
| if (rc) |
| DEBUG_PRINT_LOW("VIDIOC_PREPARE_BUF Failed"); |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: venc_use_buf:Invalid Port Index "); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_free_buf(void *buf_addr, unsigned port) |
| { |
| struct pmem *pmem_tmp; |
| struct venc_bufferpayload dev_buffer; |
| |
| memset(&dev_buffer, 0, sizeof(dev_buffer)); |
| pmem_tmp = (struct pmem *)buf_addr; |
| |
| if (port == PORT_INDEX_IN) { |
| dev_buffer.pbuffer = (OMX_U8 *)pmem_tmp->buffer; |
| dev_buffer.fd = pmem_tmp->fd; |
| dev_buffer.maped_size = pmem_tmp->size; |
| dev_buffer.sz = pmem_tmp->size; |
| dev_buffer.offset = pmem_tmp->offset; |
| DEBUG_PRINT_LOW("venc_free_buf:pbuffer = %x,fd = %x, offset = %d, maped_size = %d", \ |
| (unsigned)dev_buffer.pbuffer, \ |
| dev_buffer.fd, \ |
| dev_buffer.offset, \ |
| dev_buffer.maped_size); |
| |
| } else if (port == PORT_INDEX_OUT) { |
| dev_buffer.pbuffer = (OMX_U8 *)pmem_tmp->buffer; |
| dev_buffer.fd = pmem_tmp->fd; |
| dev_buffer.sz = pmem_tmp->size; |
| dev_buffer.maped_size = pmem_tmp->size; |
| dev_buffer.offset = pmem_tmp->offset; |
| |
| DEBUG_PRINT_LOW("venc_free_buf:pbuffer = %x,fd = %x, offset = %d, maped_size = %d", \ |
| (unsigned)dev_buffer.pbuffer, \ |
| dev_buffer.fd, \ |
| dev_buffer.offset, \ |
| dev_buffer.maped_size); |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: venc_free_buf:Invalid Port Index "); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_color_align(OMX_BUFFERHEADERTYPE *buffer, |
| OMX_U32 width, OMX_U32 height) |
| { |
| OMX_U32 y_stride = VENUS_Y_STRIDE(COLOR_FMT_NV12, width), |
| y_scanlines = VENUS_Y_SCANLINES(COLOR_FMT_NV12, height), |
| uv_stride = VENUS_UV_STRIDE(COLOR_FMT_NV12, width), |
| uv_scanlines = VENUS_UV_SCANLINES(COLOR_FMT_NV12, height), |
| src_chroma_offset = width * height; |
| |
| if (!buffer->nFilledLen) { |
| DEBUG_PRINT_HIGH("Skip color aligment on zero length buffer"); |
| return true; |
| } |
| |
| if (buffer->nAllocLen >= VENUS_BUFFER_SIZE(COLOR_FMT_NV12, width, height)) { |
| OMX_U8* src_buf = buffer->pBuffer, *dst_buf = buffer->pBuffer; |
| //Do chroma first, so that we can convert it in-place |
| src_buf += width * height; |
| dst_buf += y_stride * y_scanlines; |
| for (int line = height / 2 - 1; line >= 0; --line) { |
| memmove(dst_buf + line * uv_stride, |
| src_buf + line * width, |
| width); |
| } |
| |
| dst_buf = src_buf = buffer->pBuffer; |
| //Copy the Y next |
| for (int line = height - 1; line > 0; --line) { |
| memmove(dst_buf + line * y_stride, |
| src_buf + line * width, |
| width); |
| } |
| buffer->nFilledLen = VENUS_BUFFER_SIZE(COLOR_FMT_NV12, width, height); |
| } else { |
| DEBUG_PRINT_ERROR("Failed to align Chroma. from %lu to %lu : \ |
| Insufficient bufferLen=%lu v/s Required=%u", |
| (width*height), src_chroma_offset, buffer->nAllocLen, |
| VENUS_BUFFER_SIZE(COLOR_FMT_NV12, width, height)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_get_performance_level(OMX_U32 *perflevel) |
| { |
| if (!perflevel) { |
| DEBUG_PRINT_ERROR("Null pointer error"); |
| return false; |
| } else { |
| *perflevel = performance_level.perflevel; |
| return true; |
| } |
| } |
| |
| bool venc_dev::venc_get_vui_timing_info(OMX_U32 *enabled) |
| { |
| if (!enabled) { |
| DEBUG_PRINT_ERROR("Null pointer error"); |
| return false; |
| } else { |
| *enabled = vui_timing_info.enabled; |
| return true; |
| } |
| } |
| |
| bool venc_dev::venc_get_peak_bitrate(OMX_U32 *peakbitrate) |
| { |
| if (!peakbitrate) { |
| DEBUG_PRINT_ERROR("Null pointer error"); |
| return false; |
| } else { |
| *peakbitrate = peak_bitrate.peakbitrate; |
| return true; |
| } |
| } |
| |
| bool venc_dev::venc_empty_buf(void *buffer, void *pmem_data_buf, unsigned index, unsigned fd) |
| { |
| struct pmem *temp_buffer; |
| struct v4l2_buffer buf; |
| struct v4l2_plane plane; |
| int rc=0; |
| struct OMX_BUFFERHEADERTYPE *bufhdr; |
| LEGACY_CAM_METADATA_TYPE * meta_buf = NULL; |
| temp_buffer = (struct pmem *)buffer; |
| |
| memset (&buf, 0, sizeof(buf)); |
| memset (&plane, 0, sizeof(plane)); |
| |
| if (buffer == NULL) { |
| DEBUG_PRINT_ERROR("ERROR: venc_etb: buffer is NULL"); |
| return false; |
| } |
| |
| bufhdr = (OMX_BUFFERHEADERTYPE *)buffer; |
| |
| DEBUG_PRINT_LOW("Input buffer length %lu",bufhdr->nFilledLen); |
| |
| if (pmem_data_buf) { |
| DEBUG_PRINT_LOW("Internal PMEM addr for i/p Heap UseBuf: %p", pmem_data_buf); |
| plane.m.userptr = (unsigned long)pmem_data_buf; |
| plane.data_offset = bufhdr->nOffset; |
| plane.length = bufhdr->nAllocLen; |
| plane.bytesused = bufhdr->nFilledLen; |
| } else { |
| // -------------------------------------------------------------------------------------- |
| // [Usage] [metadatamode] [Type] [color_format] [Where is buffer info] |
| // --------------------------------------------------------------------------------------- |
| // Camera-2 1 CameraSource 0 meta-handle |
| // Camera-3 1 GrallocSource 0 gralloc-private-handle |
| // surface encode (RBG) 1 GrallocSource 1 bufhdr (color-converted) |
| // CPU (Eg: MediaCodec) 0 -- 0 bufhdr |
| // --------------------------------------------------------------------------------------- |
| if (metadatamode) { |
| plane.m.userptr = index; |
| meta_buf = (LEGACY_CAM_METADATA_TYPE *)bufhdr->pBuffer; |
| |
| if (!meta_buf) { |
| //empty EOS buffer |
| if (!bufhdr->nFilledLen && (bufhdr->nFlags & OMX_BUFFERFLAG_EOS)) { |
| plane.data_offset = bufhdr->nOffset; |
| plane.length = bufhdr->nAllocLen; |
| plane.bytesused = bufhdr->nFilledLen; |
| DEBUG_PRINT_LOW("venc_empty_buf: empty EOS buffer"); |
| } else { |
| return false; |
| } |
| } else if (!color_format) { |
| if (meta_buf->buffer_type == LEGACY_CAM_SOURCE) { |
| plane.data_offset = meta_buf->meta_handle->data[1]; |
| plane.length = meta_buf->meta_handle->data[2]; |
| plane.bytesused = meta_buf->meta_handle->data[2]; |
| DEBUG_PRINT_LOW("venc_empty_buf: camera buf: fd = %d filled %d of %d", |
| fd, plane.bytesused, plane.length); |
| } else if (meta_buf->buffer_type == kMetadataBufferTypeGrallocSource) { |
| VideoGrallocMetadata *meta_buf = (VideoGrallocMetadata *)bufhdr->pBuffer; |
| private_handle_t *handle = (private_handle_t *)meta_buf->pHandle; |
| fd = handle->fd; |
| plane.data_offset = 0; |
| plane.length = handle->size; |
| plane.bytesused = handle->size; |
| DEBUG_PRINT_LOW("venc_empty_buf: Opaque camera buf: fd = %d " |
| ": filled %d of %d", fd, plane.bytesused, plane.length); |
| } |
| } else { |
| plane.data_offset = bufhdr->nOffset; |
| plane.length = bufhdr->nAllocLen; |
| plane.bytesused = bufhdr->nFilledLen; |
| DEBUG_PRINT_LOW("venc_empty_buf: Opaque non-camera buf: fd = %d " |
| ": filled %d of %d", fd, plane.bytesused, plane.length); |
| } |
| } else { |
| plane.data_offset = bufhdr->nOffset; |
| plane.length = bufhdr->nAllocLen; |
| plane.bytesused = bufhdr->nFilledLen; |
| DEBUG_PRINT_LOW("venc_empty_buf: non-camera buf: fd = %d filled %d of %d", |
| fd, plane.bytesused, plane.length); |
| } |
| } |
| |
| buf.index = index; |
| buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| buf.memory = V4L2_MEMORY_USERPTR; |
| plane.reserved[0] = fd; |
| plane.reserved[1] = 0; |
| buf.m.planes = &plane; |
| buf.length = 1; |
| |
| if (bufhdr->nFlags & OMX_BUFFERFLAG_EOS) |
| buf.flags = V4L2_QCOM_BUF_FLAG_EOS; |
| |
| buf.timestamp.tv_sec = bufhdr->nTimeStamp / 1000000; |
| buf.timestamp.tv_usec = (bufhdr->nTimeStamp % 1000000); |
| rc = ioctl(m_nDriver_fd, VIDIOC_QBUF, &buf); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to qbuf (etb) to driver"); |
| return false; |
| } |
| |
| etb++; |
| |
| if (!streaming[OUTPUT_PORT]) { |
| enum v4l2_buf_type buf_type; |
| buf_type=V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| int ret; |
| ret = ioctl(m_nDriver_fd, VIDIOC_STREAMON, &buf_type); |
| |
| if (ret) { |
| DEBUG_PRINT_ERROR("Failed to call streamon"); |
| if (errno == EBUSY) { |
| hw_overload = true; |
| } |
| return false; |
| } else { |
| streaming[OUTPUT_PORT] = true; |
| } |
| } |
| if (m_debug.in_buffer_log) { |
| venc_input_log_buffers(bufhdr, fd, plane.data_offset); |
| } |
| |
| return true; |
| } |
| bool venc_dev::venc_fill_buf(void *buffer, void *pmem_data_buf,unsigned index,unsigned fd) |
| { |
| struct pmem *temp_buffer = NULL; |
| struct venc_buffer frameinfo; |
| struct v4l2_buffer buf; |
| struct v4l2_plane plane[VIDEO_MAX_PLANES]; |
| int rc = 0; |
| unsigned int extra_idx; |
| struct OMX_BUFFERHEADERTYPE *bufhdr; |
| |
| if (buffer == NULL) |
| return false; |
| |
| bufhdr = (OMX_BUFFERHEADERTYPE *)buffer; |
| |
| if (pmem_data_buf) { |
| DEBUG_PRINT_LOW("Internal PMEM addr for o/p Heap UseBuf: %p", pmem_data_buf); |
| plane[0].m.userptr = (unsigned long)pmem_data_buf; |
| } else { |
| DEBUG_PRINT_LOW("Shared PMEM addr for o/p PMEM UseBuf/AllocateBuf: %p", bufhdr->pBuffer); |
| plane[0].m.userptr = (unsigned long)bufhdr->pBuffer; |
| } |
| |
| buf.index = index; |
| buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| buf.memory = V4L2_MEMORY_USERPTR; |
| plane[0].length = bufhdr->nAllocLen; |
| plane[0].bytesused = bufhdr->nFilledLen; |
| plane[0].reserved[0] = fd; |
| plane[0].reserved[1] = 0; |
| plane[0].data_offset = bufhdr->nOffset; |
| buf.m.planes = plane; |
| buf.length = num_planes; |
| |
| if (venc_handle->is_secure_session()) { |
| output_metabuffer *meta_buf = (output_metabuffer *)(bufhdr->pBuffer); |
| native_handle_t *handle = meta_buf->nh; |
| plane[0].length = handle->data[3]; |
| } |
| |
| extra_idx = EXTRADATA_IDX(num_planes); |
| |
| if (extra_idx && (extra_idx < VIDEO_MAX_PLANES)) { |
| plane[extra_idx].bytesused = 0; |
| plane[extra_idx].length = extradata_info.buffer_size; |
| plane[extra_idx].m.userptr = (unsigned long) (extradata_info.uaddr + index * extradata_info.buffer_size); |
| #ifdef USE_ION |
| plane[extra_idx].reserved[0] = extradata_info.ion.fd_ion_data.fd; |
| #endif |
| plane[extra_idx].reserved[1] = extradata_info.buffer_size * index; |
| plane[extra_idx].data_offset = 0; |
| } else if (extra_idx >= VIDEO_MAX_PLANES) { |
| DEBUG_PRINT_ERROR("Extradata index higher than expected: %d", extra_idx); |
| return false; |
| } |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_QBUF, &buf); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to qbuf (ftb) to driver"); |
| return false; |
| } |
| |
| ftb++; |
| return true; |
| } |
| |
| bool venc_dev::venc_set_inband_video_header(OMX_BOOL enable) |
| { |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDEO_HEADER_MODE; |
| if(enable) { |
| control.value = V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_I_FRAME; |
| } else { |
| control.value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE; |
| } |
| |
| DEBUG_PRINT_HIGH("Set inband sps/pps: %d", enable); |
| if(ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control) < 0) { |
| DEBUG_PRINT_ERROR("Request for inband sps/pps failed"); |
| return false; |
| } |
| return true; |
| } |
| |
| bool venc_dev::venc_set_au_delimiter(OMX_BOOL enable) |
| { |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_H264_AU_DELIMITER; |
| if(enable) { |
| control.value = V4L2_MPEG_VIDC_VIDEO_H264_AU_DELIMITER_ENABLED; |
| } else { |
| control.value = V4L2_MPEG_VIDC_VIDEO_H264_AU_DELIMITER_DISABLED; |
| } |
| |
| DEBUG_PRINT_HIGH("Set au delimiter: %d", enable); |
| if(ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control) < 0) { |
| DEBUG_PRINT_ERROR("Request to set AU delimiter failed"); |
| return false; |
| } |
| return true; |
| } |
| |
| bool venc_dev::venc_set_hier_layers(QOMX_VIDEO_HIERARCHICALCODINGTYPE type, |
| OMX_U32 num_layers) |
| { |
| struct v4l2_control control; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_HIER_P_NUM_LAYERS; |
| if (type == QOMX_HIERARCHICALCODING_P) { |
| control.value = num_layers; |
| DEBUG_PRINT_HIGH("Set Hier P num layers: %d", num_layers); |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| DEBUG_PRINT_ERROR("Request to set Hier P num layers failed"); |
| return false; |
| } |
| hier_p_layers.numlayers = num_layers; |
| } else { |
| DEBUG_PRINT_ERROR("Request to set hier num layers failed for type: %d", type); |
| return false; |
| } |
| return true; |
| } |
| |
| bool venc_dev::venc_set_extradata(OMX_U32 extra_data, OMX_BOOL enable) |
| { |
| struct v4l2_control control; |
| |
| DEBUG_PRINT_HIGH("venc_set_extradata:: %x", (int) extra_data); |
| |
| if (enable == OMX_FALSE) { |
| /* No easy way to turn off extradata to the driver |
| * at the moment */ |
| return false; |
| } |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_EXTRADATA; |
| switch (extra_data) { |
| case OMX_ExtraDataVideoEncoderSliceInfo: |
| control.value = V4L2_MPEG_VIDC_EXTRADATA_MULTISLICE_INFO; |
| break; |
| case OMX_ExtraDataVideoEncoderMBInfo: |
| control.value = V4L2_MPEG_VIDC_EXTRADATA_METADATA_MBI; |
| break; |
| default: |
| DEBUG_PRINT_ERROR("Unrecognized extradata index 0x%x", extra_data); |
| return false; |
| } |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting extradata (%x) failed %d", |
| extra_data, errno); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_slice_delivery_mode(OMX_U32 enable) |
| { |
| struct v4l2_control control; |
| |
| if (enable) { |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_DELIVERY_MODE; |
| control.value = 1; |
| DEBUG_PRINT_LOW("Set slice_delivery_mode: %d", control.value); |
| |
| if (multislice.mslice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB && m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| DEBUG_PRINT_ERROR("Request for setting slice delivery mode failed"); |
| return false; |
| } else { |
| DEBUG_PRINT_LOW("Successfully set Slice delivery mode id: %d, value=%d", control.id, control.value); |
| slice_mode.enable = 1; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("Failed to set slice delivery mode, slice_mode [%lu] " |
| "is not MB BASED or [%lu] is not H264 codec ", multislice.mslice_mode, |
| m_sVenc_cfg.codectype); |
| } |
| } else { |
| DEBUG_PRINT_ERROR("Slice_DELIVERY_MODE not enabled"); |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_enable_initial_qp(QOMX_EXTNINDEX_VIDEO_INITIALQP* initqp) |
| { |
| int rc; |
| struct v4l2_control control; |
| struct v4l2_ext_control ctrl[4]; |
| struct v4l2_ext_controls controls; |
| |
| if (((initqp->nQpI >= 1) && (initqp->nQpI <= 51)) && |
| ((initqp->nQpP >= 1) && (initqp->nQpP <= 51)) && |
| ((initqp->nQpB >= 1) && (initqp->nQpB <= 51))) { |
| ctrl[0].id = V4L2_CID_MPEG_VIDC_VIDEO_I_FRAME_QP; |
| ctrl[0].value = initqp->nQpI; |
| ctrl[1].id = V4L2_CID_MPEG_VIDC_VIDEO_P_FRAME_QP; |
| ctrl[1].value = initqp->nQpP; |
| ctrl[2].id = V4L2_CID_MPEG_VIDC_VIDEO_B_FRAME_QP; |
| ctrl[2].value = initqp->nQpB; |
| ctrl[3].id = V4L2_CID_MPEG_VIDC_VIDEO_ENABLE_INITIAL_QP; |
| ctrl[3].value = initqp->bEnableInitQp; |
| |
| controls.count = 4; |
| controls.ctrl_class = V4L2_CTRL_CLASS_MPEG; |
| controls.controls = ctrl; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x val=%d, id=%x val=%d, id=%x val=%d, id=%x val=%d", |
| controls.controls[0].id, controls.controls[0].value, |
| controls.controls[1].id, controls.controls[1].value, |
| controls.controls[2].id, controls.controls[2].value, |
| controls.controls[3].id, controls.controls[3].value); |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_EXT_CTRLS, &controls); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set session_qp, errno:%d", errno); |
| return false; |
| } |
| |
| init_qp.iframeqp = initqp->nQpI; |
| init_qp.pframeqp = initqp->nQpP; |
| init_qp.bframeqp = initqp->nQpB; |
| init_qp.enableinitqp = initqp->bEnableInitQp; |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x val=%d, id=%x val=%d, id=%x val=%d, id=%x val=%d", |
| controls.controls[0].id, controls.controls[0].value, |
| controls.controls[1].id, controls.controls[1].value, |
| controls.controls[2].id, controls.controls[2].value, |
| controls.controls[3].id, controls.controls[3].value); |
| return true; |
| } else { |
| DEBUG_PRINT_ERROR("QP Values are out of valid range (1-51) I: %d, P: %d, B: %d", |
| initqp->nQpI, initqp->nQpP, initqp->nQpB); |
| return false; |
| } |
| } |
| |
| bool venc_dev::venc_set_session_qp(OMX_U32 i_frame_qp, OMX_U32 p_frame_qp,OMX_U32 b_frame_qp) |
| { |
| int rc; |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP; |
| control.value = i_frame_qp; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| session_qp.iframeqp = control.value; |
| |
| control.id = V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP; |
| control.value = p_frame_qp; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| session_qp.pframeqp = control.value; |
| |
| if ((codec_profile.profile == V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) || |
| (codec_profile.profile == V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)) { |
| |
| control.id = V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP; |
| control.value = b_frame_qp; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| session_qp.bframeqp = control.value; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_session_qp_range(OMX_U32 min_qp, OMX_U32 max_qp) |
| { |
| int rc; |
| struct v4l2_control control; |
| |
| if ((min_qp >= session_qp_range.minqp) && (max_qp <= session_qp_range.maxqp)) { |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_VP8_MIN_QP; |
| else |
| control.id = V4L2_CID_MPEG_VIDEO_H264_MIN_QP; |
| control.value = min_qp; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set MIN_QP control id=%d, val=%d", |
| control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control\n"); |
| return false; |
| } |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_VP8_MAX_QP; |
| else |
| control.id = V4L2_CID_MPEG_VIDEO_H264_MAX_QP; |
| control.value = max_qp; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set MAX_QP control id=%d, val=%d", |
| control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control\n"); |
| return false; |
| } |
| } else { |
| DEBUG_PRINT_ERROR("Wrong qp values[%d %d], allowed range[%d %d]", |
| min_qp, max_qp, session_qp_range.minqp, session_qp_range.maxqp); |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_profile_level(OMX_U32 eProfile,OMX_U32 eLevel) |
| { |
| struct venc_profile requested_profile = {0}; |
| struct ven_profilelevel requested_level = {0}; |
| unsigned long mb_per_frame = 0; |
| DEBUG_PRINT_LOW("venc_set_profile_level:: eProfile = %lu, Level = %lu", |
| eProfile, eLevel); |
| mb_per_frame = ((m_sVenc_cfg.dvs_height + 15) >> 4)* |
| ((m_sVenc_cfg.dvs_width + 15) >> 4); |
| |
| if ((eProfile == 0) && (eLevel == 0) && m_profile_set && m_level_set) { |
| DEBUG_PRINT_LOW("Profile/Level setting complete before venc_start"); |
| return true; |
| } |
| |
| DEBUG_PRINT_LOW("Validating Profile/Level from table"); |
| |
| if (!venc_validate_profile_level(&eProfile, &eLevel)) { |
| DEBUG_PRINT_LOW("ERROR: Profile/Level validation failed"); |
| return false; |
| } |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| DEBUG_PRINT_LOW("eProfile = %lu, OMX_VIDEO_MPEG4ProfileSimple = %d and " |
| "OMX_VIDEO_MPEG4ProfileAdvancedSimple = %d", eProfile, |
| OMX_VIDEO_MPEG4ProfileSimple, OMX_VIDEO_MPEG4ProfileAdvancedSimple); |
| |
| if (eProfile == OMX_VIDEO_MPEG4ProfileSimple) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE; |
| } else if (eProfile == OMX_VIDEO_MPEG4ProfileAdvancedSimple) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE; |
| } else { |
| DEBUG_PRINT_LOW("ERROR: Unsupported MPEG4 profile = %lu", |
| eProfile); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("eLevel = %lu, OMX_VIDEO_MPEG4Level0 = %d, OMX_VIDEO_MPEG4Level1 = %d," |
| "OMX_VIDEO_MPEG4Level2 = %d, OMX_VIDEO_MPEG4Level3 = %d, OMX_VIDEO_MPEG4Level4 = %d," |
| "OMX_VIDEO_MPEG4Level5 = %d", eLevel, OMX_VIDEO_MPEG4Level0, OMX_VIDEO_MPEG4Level1, |
| OMX_VIDEO_MPEG4Level2, OMX_VIDEO_MPEG4Level3, OMX_VIDEO_MPEG4Level4, OMX_VIDEO_MPEG4Level5); |
| |
| if (mb_per_frame >= 3600) { |
| if (requested_profile.profile == V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE) |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5; |
| |
| if (requested_profile.profile == V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE) |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5; |
| } else { |
| switch (eLevel) { |
| case OMX_VIDEO_MPEG4Level0: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0; |
| break; |
| case OMX_VIDEO_MPEG4Level0b: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B; |
| break; |
| case OMX_VIDEO_MPEG4Level1: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_1; |
| break; |
| case OMX_VIDEO_MPEG4Level2: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_2; |
| break; |
| case OMX_VIDEO_MPEG4Level3: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_3; |
| break; |
| case OMX_VIDEO_MPEG4Level4a: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_4; |
| break; |
| case OMX_VIDEO_MPEG4Level5: |
| requested_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5; |
| break; |
| default: |
| return false; |
| // TODO update corresponding levels for MPEG4_LEVEL_3b,MPEG4_LEVEL_6 |
| break; |
| } |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| |
| switch (eProfile) { |
| case OMX_VIDEO_H263ProfileBaseline: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_BASELINE; |
| break; |
| case OMX_VIDEO_H263ProfileH320Coding: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_H320CODING; |
| break; |
| case OMX_VIDEO_H263ProfileBackwardCompatible: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_BACKWARDCOMPATIBLE; |
| break; |
| case OMX_VIDEO_H263ProfileISWV2: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_ISWV2; |
| break; |
| case OMX_VIDEO_H263ProfileISWV3: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_ISWV3; |
| break; |
| case OMX_VIDEO_H263ProfileHighCompression: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_HIGHCOMPRESSION; |
| break; |
| case OMX_VIDEO_H263ProfileInternet: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_INTERNET; |
| break; |
| case OMX_VIDEO_H263ProfileInterlace: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_INTERLACE; |
| break; |
| case OMX_VIDEO_H263ProfileHighLatency: |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_H263_PROFILE_HIGHLATENCY; |
| break; |
| default: |
| DEBUG_PRINT_LOW("ERROR: Unsupported H.263 profile = %lu", |
| requested_profile.profile); |
| return false; |
| } |
| |
| //profile level |
| switch (eLevel) { |
| case OMX_VIDEO_H263Level10: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_1_0; |
| break; |
| case OMX_VIDEO_H263Level20: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_2_0; |
| break; |
| case OMX_VIDEO_H263Level30: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_3_0; |
| break; |
| case OMX_VIDEO_H263Level40: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_4_0; |
| break; |
| case OMX_VIDEO_H263Level45: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_4_5; |
| break; |
| case OMX_VIDEO_H263Level50: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_5_0; |
| break; |
| case OMX_VIDEO_H263Level60: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_6_0; |
| break; |
| case OMX_VIDEO_H263Level70: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_H263_LEVEL_7_0; |
| break; |
| default: |
| return false; |
| break; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| if (eProfile == OMX_VIDEO_AVCProfileBaseline) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE; |
| } else if(eProfile == QOMX_VIDEO_AVCProfileConstrainedBaseline) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE; |
| } else if (eProfile == OMX_VIDEO_AVCProfileMain) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN; |
| } else if (eProfile == OMX_VIDEO_AVCProfileExtended) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED; |
| } else if (eProfile == OMX_VIDEO_AVCProfileHigh) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH; |
| } else if (eProfile == OMX_VIDEO_AVCProfileHigh10) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10; |
| } else if (eProfile == OMX_VIDEO_AVCProfileHigh422) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422; |
| } else if (eProfile == OMX_VIDEO_AVCProfileHigh444) { |
| requested_profile.profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE; |
| } else { |
| DEBUG_PRINT_LOW("ERROR: Unsupported H.264 profile = %lu", |
| requested_profile.profile); |
| return false; |
| } |
| |
| //profile level |
| switch (eLevel) { |
| case OMX_VIDEO_AVCLevel1: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1_0; |
| break; |
| case OMX_VIDEO_AVCLevel1b: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1B; |
| break; |
| case OMX_VIDEO_AVCLevel11: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1_1; |
| break; |
| case OMX_VIDEO_AVCLevel12: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1_2; |
| break; |
| case OMX_VIDEO_AVCLevel13: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_1_3; |
| break; |
| case OMX_VIDEO_AVCLevel2: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_2_0; |
| break; |
| case OMX_VIDEO_AVCLevel21: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_2_1; |
| break; |
| case OMX_VIDEO_AVCLevel22: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_2_2; |
| break; |
| case OMX_VIDEO_AVCLevel3: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_3_0; |
| break; |
| case OMX_VIDEO_AVCLevel31: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_3_1; |
| break; |
| case OMX_VIDEO_AVCLevel32: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_3_2; |
| break; |
| case OMX_VIDEO_AVCLevel4: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0; |
| break; |
| case OMX_VIDEO_AVCLevel41: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_4_1; |
| break; |
| case OMX_VIDEO_AVCLevel42: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_4_2; |
| break; |
| case OMX_VIDEO_AVCLevel5: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_5_0; |
| break; |
| case OMX_VIDEO_AVCLevel51: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_5_1; |
| break; |
| case OMX_VIDEO_AVCLevel52: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_5_2; |
| break; |
| case OMX_VIDEO_AVCLevelMax: |
| requested_level.level = V4L2_MPEG_VIDEO_H264_LEVEL_5_2; |
| break; |
| default : |
| DEBUG_PRINT_ERROR("ERROR: Unsupported H.264 level= %lu", |
| requested_level.level); |
| return false; |
| break; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| if (!(eProfile == OMX_VIDEO_VP8ProfileMain)) { |
| DEBUG_PRINT_ERROR("ERROR: Unsupported VP8 profile = %lu", |
| eProfile); |
| return false; |
| } |
| requested_profile.profile = V4L2_MPEG_VIDC_VIDEO_VP8_UNUSED; |
| m_profile_set = true; |
| switch(eLevel) { |
| case OMX_VIDEO_VP8Level_Version0: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_0; |
| break; |
| case OMX_VIDEO_VP8Level_Version1: |
| requested_level.level = V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_1; |
| break; |
| default: |
| DEBUG_PRINT_ERROR("ERROR: Unsupported VP8 level= %lu", |
| eLevel); |
| return false; |
| break; |
| } |
| } |
| |
| if (!m_profile_set) { |
| int rc; |
| struct v4l2_control control; |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| control.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| control.id = V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_H263_PROFILE; |
| } else { |
| DEBUG_PRINT_ERROR("Wrong CODEC"); |
| return false; |
| } |
| |
| control.value = requested_profile.profile; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| codec_profile.profile = control.value; |
| m_profile_set = true; |
| } |
| |
| if (!m_level_set) { |
| int rc; |
| struct v4l2_control control; |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| control.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| control.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_H263_LEVEL; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_VP8_PROFILE_LEVEL; |
| } else { |
| DEBUG_PRINT_ERROR("Wrong CODEC"); |
| return false; |
| } |
| |
| control.value = requested_level.level; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| profile_level.level = control.value; |
| m_level_set = true; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_voptiming_cfg( OMX_U32 TimeIncRes) |
| { |
| |
| struct venc_voptimingcfg vop_timing_cfg; |
| |
| DEBUG_PRINT_LOW("venc_set_voptiming_cfg: TimeRes = %lu", |
| TimeIncRes); |
| |
| vop_timing_cfg.voptime_resolution = TimeIncRes; |
| |
| voptimecfg.voptime_resolution = vop_timing_cfg.voptime_resolution; |
| return true; |
| } |
| |
| bool venc_dev::venc_set_intra_period(OMX_U32 nPFrames, OMX_U32 nBFrames) |
| { |
| |
| DEBUG_PRINT_LOW("venc_set_intra_period: nPFrames = %lu", |
| nPFrames); |
| int rc; |
| struct v4l2_control control; |
| |
| if ((codec_profile.profile != V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE) && |
| (codec_profile.profile != V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) && |
| (codec_profile.profile != V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)) { |
| nBFrames=0; |
| } |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_NUM_P_FRAMES; |
| control.value = nPFrames; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| intra_period.num_pframes = control.value; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_NUM_B_FRAMES; |
| control.value = nBFrames; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| |
| intra_period.num_bframes = control.value; |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_IDR_PERIOD; |
| control.value = 1; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| idrperiod.idrperiod = 1; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_idr_period(OMX_U32 nPFrames, OMX_U32 nIDRPeriod) |
| { |
| int rc = 0; |
| struct v4l2_control control; |
| DEBUG_PRINT_LOW("venc_set_idr_period: nPFrames = %lu, nIDRPeriod: %lu", |
| nPFrames, nIDRPeriod); |
| |
| if (m_sVenc_cfg.codectype != V4L2_PIX_FMT_H264) { |
| DEBUG_PRINT_ERROR("ERROR: IDR period valid for H264 only!!"); |
| return false; |
| } |
| |
| if (venc_set_intra_period (nPFrames, intra_period.num_bframes) == false) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting intra period failed"); |
| return false; |
| } |
| |
| intra_period.num_pframes = nPFrames; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_IDR_PERIOD; |
| control.value = nIDRPeriod; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| idrperiod.idrperiod = nIDRPeriod; |
| return true; |
| } |
| |
| bool venc_dev::venc_set_entropy_config(OMX_BOOL enable, OMX_U32 i_cabac_level) |
| { |
| int rc = 0; |
| struct v4l2_control control; |
| |
| DEBUG_PRINT_LOW("venc_set_entropy_config: CABAC = %u level: %lu", enable, i_cabac_level); |
| |
| if (enable && (codec_profile.profile != V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) && |
| (codec_profile.profile != V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE)) { |
| |
| control.value = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC; |
| control.id = V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| entropy.entropysel = control.value; |
| |
| if (i_cabac_level == 0) { |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_H264_CABAC_MODEL_0; |
| } else if (i_cabac_level == 1) { |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_H264_CABAC_MODEL_1; |
| } else if (i_cabac_level == 2) { |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_H264_CABAC_MODEL_2; |
| } |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_H264_CABAC_MODEL; |
| //control.value = entropy_cfg.cabacmodel; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| entropy.cabacmodel=control.value; |
| } else if (!enable) { |
| control.value = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC; |
| control.id = V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| entropy.entropysel=control.value; |
| } else { |
| DEBUG_PRINT_ERROR("Invalid Entropy mode for Baseline Profile"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_multislice_cfg(OMX_INDEXTYPE Codec, OMX_U32 nSlicesize) // MB |
| { |
| int rc; |
| struct v4l2_control control; |
| bool status = true; |
| |
| if ((Codec != OMX_IndexParamVideoH263) && (nSlicesize)) { |
| control.value = V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB; |
| } else { |
| control.value = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE; |
| } |
| |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| multislice.mslice_mode=control.value; |
| |
| if (multislice.mslice_mode!=V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE) { |
| |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB; |
| control.value = nSlicesize; |
| DEBUG_PRINT_LOW("Calling SLICE_MB IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| multislice.mslice_size=control.value; |
| |
| } |
| |
| return status; |
| } |
| |
| bool venc_dev::venc_set_intra_refresh(OMX_VIDEO_INTRAREFRESHTYPE ir_mode, OMX_U32 irMBs) |
| { |
| bool status = true; |
| int rc; |
| struct v4l2_control control_mode,control_mbs; |
| control_mode.id = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_MODE; |
| |
| // There is no disabled mode. Disabled mode is indicated by a 0 count. |
| if (irMBs == 0 || ir_mode == OMX_VIDEO_IntraRefreshMax) { |
| control_mode.value = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_NONE; |
| return status; |
| } else if ((ir_mode == OMX_VIDEO_IntraRefreshCyclic) && |
| (irMBs < ((m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)>>8))) { |
| control_mode.value = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_CYCLIC; |
| control_mbs.id=V4L2_CID_MPEG_VIDC_VIDEO_CIR_MBS; |
| control_mbs.value=irMBs; |
| } else if ((ir_mode == OMX_VIDEO_IntraRefreshAdaptive) && |
| (irMBs < ((m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)>>8))) { |
| control_mode.value = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_ADAPTIVE; |
| control_mbs.id=V4L2_CID_MPEG_VIDC_VIDEO_AIR_MBS; |
| control_mbs.value=irMBs; |
| } else if ((ir_mode == OMX_VIDEO_IntraRefreshBoth) && |
| (irMBs < ((m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)>>8))) { |
| control_mode.value = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_CYCLIC_ADAPTIVE; |
| } else if ((ir_mode == OMX_VIDEO_IntraRefreshRandom) && |
| (irMBs < ((m_sVenc_cfg.dvs_width * m_sVenc_cfg.dvs_height)>>8))) { |
| control_mode.value = V4L2_CID_MPEG_VIDC_VIDEO_INTRA_REFRESH_RANDOM; |
| control_mbs.id = V4L2_CID_MPEG_VIDC_VIDEO_AIR_MBS; |
| control_mbs.value = irMBs; |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: Invalid IntraRefresh Parameters:" |
| "mb count: %lu, mb mode:%d", irMBs, ir_mode); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%u, val=%d", control_mode.id, control_mode.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control_mode); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control_mode.id, control_mode.value); |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control_mbs.id, control_mbs.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control_mbs); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control_mbs.id, control_mbs.value); |
| |
| intra_refresh.irmode = control_mode.value; |
| intra_refresh.mbcount = control_mbs.value; |
| |
| return status; |
| } |
| |
| bool venc_dev::venc_set_error_resilience(OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE* error_resilience) |
| { |
| bool status = true; |
| struct venc_headerextension hec_cfg; |
| struct venc_multiclicecfg multislice_cfg; |
| int rc; |
| OMX_U32 resynchMarkerSpacingBytes = 0; |
| struct v4l2_control control; |
| |
| memset(&control, 0, sizeof(control)); |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| if (error_resilience->bEnableHEC) { |
| hec_cfg.header_extension = 1; |
| } else { |
| hec_cfg.header_extension = 0; |
| } |
| |
| hec.header_extension = error_resilience->bEnableHEC; |
| } |
| |
| if (error_resilience->bEnableRVLC) { |
| DEBUG_PRINT_ERROR("RVLC is not Supported"); |
| return false; |
| } |
| |
| if (( m_sVenc_cfg.codectype != V4L2_PIX_FMT_H263) && |
| (error_resilience->bEnableDataPartitioning)) { |
| DEBUG_PRINT_ERROR("DataPartioning are not Supported for MPEG4/H264"); |
| return false; |
| } |
| |
| if (error_resilience->nResynchMarkerSpacing) { |
| resynchMarkerSpacingBytes = error_resilience->nResynchMarkerSpacing; |
| resynchMarkerSpacingBytes = ALIGN(resynchMarkerSpacingBytes, 8) >> 3; |
| } |
| if (( m_sVenc_cfg.codectype != V4L2_PIX_FMT_H263) && |
| (error_resilience->nResynchMarkerSpacing)) { |
| multislice_cfg.mslice_mode = VEN_MSLICE_CNT_BYTE; |
| multislice_cfg.mslice_size = resynchMarkerSpacingBytes; |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE; |
| control.value = V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES; |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263 && |
| error_resilience->bEnableDataPartitioning) { |
| multislice_cfg.mslice_mode = VEN_MSLICE_GOB; |
| multislice_cfg.mslice_size = resynchMarkerSpacingBytes; |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE; |
| control.value = V4L2_MPEG_VIDEO_MULTI_SLICE_GOB; |
| } else { |
| multislice_cfg.mslice_mode = VEN_MSLICE_OFF; |
| multislice_cfg.mslice_size = 0; |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE; |
| control.value = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE; |
| } |
| |
| DEBUG_PRINT_LOW("%s(): mode = %lu, size = %lu", __func__, |
| multislice_cfg.mslice_mode, multislice_cfg.mslice_size); |
| DEBUG_PRINT_ERROR("Calling IOCTL set control for id=%x, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set Slice mode control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_ERROR("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| multislice.mslice_mode=control.value; |
| |
| control.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES; |
| control.value = resynchMarkerSpacingBytes; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x, val=%d\n", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set MAX MB control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_ERROR("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| multislice.mslice_mode = multislice_cfg.mslice_mode; |
| multislice.mslice_size = multislice_cfg.mslice_size; |
| return status; |
| } |
| |
| bool venc_dev::venc_set_inloop_filter(OMX_VIDEO_AVCLOOPFILTERTYPE loopfilter) |
| { |
| int rc; |
| struct v4l2_control control; |
| control.id=V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE; |
| |
| if (loopfilter == OMX_VIDEO_AVCLoopFilterEnable) { |
| control.value=V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED; |
| } else if (loopfilter == OMX_VIDEO_AVCLoopFilterDisable) { |
| control.value=V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED; |
| } else if (loopfilter == OMX_VIDEO_AVCLoopFilterDisableSliceBoundary) { |
| control.value=V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY; |
| } |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| dbkfilter.db_mode=control.value; |
| |
| control.id=V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA; |
| control.value=0; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| control.id=V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA; |
| control.value=0; |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| |
| dbkfilter.slicealpha_offset = dbkfilter.slicebeta_offset = 0; |
| return true; |
| } |
| |
| bool venc_dev::venc_set_target_bitrate(OMX_U32 nTargetBitrate, OMX_U32 config) |
| { |
| DEBUG_PRINT_LOW("venc_set_target_bitrate: bitrate = %lu", |
| nTargetBitrate); |
| struct v4l2_control control; |
| int rc = 0; |
| control.id = V4L2_CID_MPEG_VIDEO_BITRATE; |
| control.value = nTargetBitrate; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| |
| m_sVenc_cfg.targetbitrate = control.value; |
| bitrate.target_bitrate = control.value; |
| |
| if (!config) { |
| m_level_set = false; |
| |
| if (venc_set_profile_level(0, 0)) { |
| DEBUG_PRINT_HIGH("Calling set level (Bitrate) with %lu",profile_level.level); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_encode_framerate(OMX_U32 encode_framerate, OMX_U32 config) |
| { |
| struct v4l2_streamparm parm; |
| int rc = 0; |
| struct venc_framerate frame_rate_cfg; |
| Q16ToFraction(encode_framerate,frame_rate_cfg.fps_numerator,frame_rate_cfg.fps_denominator); |
| parm.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| parm.parm.output.timeperframe.numerator = frame_rate_cfg.fps_denominator; |
| parm.parm.output.timeperframe.denominator = frame_rate_cfg.fps_numerator; |
| |
| if (frame_rate_cfg.fps_numerator > 0) |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_PARM, &parm); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting framerate failed"); |
| return false; |
| } |
| |
| m_sVenc_cfg.fps_den = frame_rate_cfg.fps_denominator; |
| m_sVenc_cfg.fps_num = frame_rate_cfg.fps_numerator; |
| |
| if (!config) { |
| m_level_set = false; |
| |
| if (venc_set_profile_level(0, 0)) { |
| DEBUG_PRINT_HIGH("Calling set level (Framerate) with %lu",profile_level.level); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_color_format(OMX_COLOR_FORMATTYPE color_format) |
| { |
| struct v4l2_format fmt; |
| DEBUG_PRINT_LOW("venc_set_color_format: color_format = %u ", color_format); |
| |
| if ((int)color_format == (int)OMX_COLOR_FormatYUV420SemiPlanar || |
| (int)color_format == (int)QOMX_COLOR_FORMATYUV420PackedSemiPlanar32m) { |
| m_sVenc_cfg.inputformat = V4L2_PIX_FMT_NV12; |
| } else if ((int)color_format == (int)QOMX_COLOR_FormatYVU420SemiPlanar) { |
| m_sVenc_cfg.inputformat = V4L2_PIX_FMT_NV21; |
| } else { |
| DEBUG_PRINT_ERROR("WARNING: Unsupported Color format [%d]", color_format); |
| m_sVenc_cfg.inputformat = V4L2_PIX_FMT_NV12; |
| DEBUG_PRINT_HIGH("Default color format YUV420SemiPlanar is set"); |
| } |
| |
| fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.inputformat; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.input_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.input_width; |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt)) { |
| DEBUG_PRINT_ERROR("Failed setting color format %x", color_format); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_intra_vop_refresh(OMX_BOOL intra_vop_refresh) |
| { |
| DEBUG_PRINT_LOW("venc_set_intra_vop_refresh: intra_vop = %uc", intra_vop_refresh); |
| |
| if (intra_vop_refresh == OMX_TRUE) { |
| struct v4l2_control control; |
| int rc; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_REQUEST_IFRAME; |
| control.value = 1; |
| DEBUG_PRINT_ERROR("Calling IOCTL set control for id=%x, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set Intra Frame Request control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_ERROR("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| } else { |
| DEBUG_PRINT_ERROR("ERROR: VOP Refresh is False, no effect"); |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_deinterlace(OMX_U32 enable) |
| { |
| DEBUG_PRINT_LOW("venc_set_deinterlace: enable = %lu", enable); |
| struct v4l2_control control; |
| int rc; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_DEINTERLACE; |
| if (enable) |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_DEINTERLACE_ENABLED; |
| else |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_DEINTERLACE_DISABLED; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set Deinterlcing control"); |
| return false; |
| } |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| deinterlace_enabled = true; |
| return true; |
| } |
| |
| bool venc_dev::venc_set_ltrmode(OMX_U32 enable, OMX_U32 count) |
| { |
| DEBUG_PRINT_LOW("venc_set_ltrmode: enable = %lu", enable); |
| struct v4l2_control control; |
| struct v4l2_ext_control ctrl[2]; |
| struct v4l2_ext_controls controls; |
| unsigned const int *profile_tbl = NULL; |
| OMX_U32 mb_per_frame, mb_per_sec; |
| int rc, new_level, new_profile; |
| |
| ctrl[0].id = V4L2_CID_MPEG_VIDC_VIDEO_LTRMODE; |
| if (enable) |
| ctrl[0].value = V4L2_MPEG_VIDC_VIDEO_LTR_MODE_MANUAL; |
| else |
| ctrl[0].value = V4L2_MPEG_VIDC_VIDEO_LTR_MODE_DISABLE; |
| |
| ctrl[1].id = V4L2_CID_MPEG_VIDC_VIDEO_LTRCOUNT; |
| if (enable && count > 0) |
| ctrl[1].value = count; |
| else if (enable) |
| ctrl[1].value = 1; |
| else |
| ctrl[1].value = 0; |
| |
| controls.count = 2; |
| controls.ctrl_class = V4L2_CTRL_CLASS_MPEG; |
| controls.controls = ctrl; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x, val=%d id=%x, val=%d", |
| controls.controls[0].id, controls.controls[0].value, |
| controls.controls[1].id, controls.controls[1].value); |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_EXT_CTRLS, &controls); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set ltrmode %d", rc); |
| return false; |
| } |
| ltrinfo.enabled = enable; |
| ltrinfo.count = count; |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, val=%d id=%x, val=%d", |
| controls.controls[0].id, controls.controls[0].value, |
| controls.controls[1].id, controls.controls[1].value); |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_EXTRADATA; |
| control.value = V4L2_MPEG_VIDC_EXTRADATA_LTR; |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for setting extradata failed"); |
| return false; |
| } |
| |
| if (!venc_set_profile_level(0, 0)) { |
| DEBUG_PRINT_ERROR("ERROR: %s(): Driver Profile/Level is NOT SET", |
| __func__); |
| } else { |
| DEBUG_PRINT_HIGH("%s(): Driver Profile[%lu]/Level[%lu] successfully SET", |
| __func__, codec_profile.profile, profile_level.level); |
| } |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_useltr(OMX_U32 frameIdx) |
| { |
| DEBUG_PRINT_LOW("venc_use_goldenframe"); |
| int rc = true; |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_USELTRFRAME; |
| control.value = frameIdx; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set use_ltr %d", rc); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, val=%d", |
| control.id, control.value); |
| return true; |
| } |
| |
| bool venc_dev::venc_set_markltr(OMX_U32 frameIdx) |
| { |
| DEBUG_PRINT_LOW("venc_set_goldenframe"); |
| int rc = true; |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_MARKLTRFRAME; |
| control.value = frameIdx; |
| |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set ltrmode %d", rc); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, val=%d", |
| control.id, control.value); |
| return true; |
| } |
| |
| bool venc_dev::venc_set_vpe_rotation(OMX_S32 rotation_angle) |
| { |
| DEBUG_PRINT_LOW("venc_set_vpe_rotation: rotation angle = %ld", rotation_angle); |
| struct v4l2_control control; |
| int rc; |
| struct v4l2_format fmt; |
| struct v4l2_requestbuffers bufreq; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_ROTATION; |
| if (rotation_angle == 0) |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_ROTATION_NONE; |
| else if (rotation_angle == 90) |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_ROTATION_90; |
| else if (rotation_angle == 180) |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_ROTATION_180; |
| else if (rotation_angle == 270) |
| control.value = V4L2_CID_MPEG_VIDC_VIDEO_ROTATION_270; |
| else { |
| DEBUG_PRINT_ERROR("Failed to find valid rotation angle"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_HIGH("Failed to set VPE Rotation control"); |
| return false; |
| } |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| fmt.fmt.pix_mp.height = m_sVenc_cfg.dvs_height; |
| fmt.fmt.pix_mp.width = m_sVenc_cfg.dvs_width; |
| fmt.fmt.pix_mp.pixelformat = m_sVenc_cfg.codectype; |
| if (ioctl(m_nDriver_fd, VIDIOC_S_FMT, &fmt)) { |
| DEBUG_PRINT_ERROR("Failed to set format on capture port"); |
| return false; |
| } |
| |
| m_sOutput_buff_property.datasize = fmt.fmt.pix_mp.plane_fmt[0].sizeimage; |
| bufreq.memory = V4L2_MEMORY_USERPTR; |
| bufreq.count = m_sOutput_buff_property.actualcount; |
| bufreq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| if (ioctl(m_nDriver_fd,VIDIOC_REQBUFS, &bufreq)) { |
| DEBUG_PRINT_ERROR("ERROR: Request for o/p buffer count failed for rotation"); |
| return false; |
| } |
| if (bufreq.count >= m_sOutput_buff_property.mincount) |
| m_sOutput_buff_property.actualcount = m_sOutput_buff_property.mincount = bufreq.count; |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_ratectrl_cfg(OMX_VIDEO_CONTROLRATETYPE eControlRate) |
| { |
| bool status = true; |
| struct v4l2_control control; |
| int rc = 0; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL; |
| |
| switch (eControlRate) { |
| case OMX_Video_ControlRateDisable: |
| control.value=V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL_OFF; |
| break; |
| case OMX_Video_ControlRateVariableSkipFrames: |
| control.value=V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL_VBR_VFR; |
| break; |
| case OMX_Video_ControlRateVariable: |
| control.value=V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL_VBR_CFR; |
| break; |
| case OMX_Video_ControlRateConstantSkipFrames: |
| control.value=V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL_CBR_VFR; |
| break; |
| case OMX_Video_ControlRateConstant: |
| control.value=V4L2_CID_MPEG_VIDC_VIDEO_RATE_CONTROL_CBR_CFR; |
| break; |
| default: |
| status = false; |
| break; |
| } |
| |
| if (status) { |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| rate_ctrl.rcmode = control.value; |
| } |
| |
| return status; |
| } |
| |
| bool venc_dev::venc_set_perf_level(QOMX_VIDEO_PERF_LEVEL ePerfLevel) |
| { |
| bool status = true; |
| struct v4l2_control control; |
| int rc = 0; |
| control.id = V4L2_CID_MPEG_VIDC_SET_PERF_LEVEL; |
| |
| switch (ePerfLevel) { |
| case OMX_QCOM_PerfLevelNominal: |
| control.value = V4L2_CID_MPEG_VIDC_PERF_LEVEL_NOMINAL; |
| break; |
| case OMX_QCOM_PerfLevelTurbo: |
| control.value = V4L2_CID_MPEG_VIDC_PERF_LEVEL_TURBO; |
| break; |
| default: |
| status = false; |
| break; |
| } |
| |
| if (status) { |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set control for id=%d, val=%d", control.id, control.value); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| } |
| return status; |
| } |
| |
| bool venc_dev::venc_set_vui_timing_info(OMX_BOOL enable) |
| { |
| struct v4l2_control control; |
| int rc = 0; |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_H264_VUI_TIMING_INFO; |
| |
| if (enable) |
| control.value = V4L2_MPEG_VIDC_VIDEO_H264_VUI_TIMING_INFO_ENABLED; |
| else |
| control.value = V4L2_MPEG_VIDC_VIDEO_H264_VUI_TIMING_INFO_DISABLED; |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%x, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set VUI timing info control"); |
| return false; |
| } |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, value=%d", control.id, control.value); |
| return true; |
| } |
| |
| bool venc_dev::venc_set_peak_bitrate(OMX_U32 nPeakBitrate) |
| { |
| struct v4l2_control control; |
| int rc = 0; |
| control.id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK; |
| control.value = nPeakBitrate; |
| |
| DEBUG_PRINT_LOW("venc_set_peak_bitrate: bitrate = %lu", nPeakBitrate); |
| |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| rc = ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control); |
| |
| if (rc) { |
| DEBUG_PRINT_ERROR("Failed to set peak bitrate control"); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%d, value=%d", control.id, control.value); |
| |
| return true; |
| } |
| |
| bool venc_dev::venc_set_session_priority(OMX_U32 priority) { |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_PRIORITY; |
| switch(priority) { |
| case 0: |
| control.value = V4L2_MPEG_VIDC_VIDEO_PRIORITY_REALTIME_ENABLE; |
| break; |
| case 1: |
| control.value = V4L2_MPEG_VIDC_VIDEO_PRIORITY_REALTIME_DISABLE; |
| break; |
| default: |
| priority = 1; |
| control.value = V4L2_MPEG_VIDC_VIDEO_PRIORITY_REALTIME_DISABLE; |
| DEBUG_PRINT_ERROR("Unsupported priority level %u", priority); |
| break; |
| } |
| |
| if (ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| DEBUG_PRINT_ERROR("Failed to set V4L2_MPEG_VIDC_VIDEO_PRIORITY_REALTIME_%s", |
| priority == 0 ? "ENABLE" : "DISABLE"); |
| return false; |
| } |
| |
| sess_priority.priority = priority; |
| |
| DEBUG_PRINT_LOW("Success IOCTL set control for id=%x, val=%d", |
| control.id, control.value); |
| return true; |
| } |
| |
| bool venc_dev::venc_set_operatingrate(OMX_U32 rate) { |
| struct v4l2_control control; |
| |
| control.id = V4L2_CID_MPEG_VIDC_VIDEO_OPERATING_RATE; |
| control.value = rate; |
| |
| DEBUG_PRINT_LOW("venc_set_operating_rate: %d fps", rate >> 16); |
| DEBUG_PRINT_LOW("Calling IOCTL set control for id=%d, val=%d", control.id, control.value); |
| |
| if(ioctl(m_nDriver_fd, VIDIOC_S_CTRL, &control)) { |
| hw_overload = errno == EBUSY; |
| DEBUG_PRINT_ERROR("Failed to set operating rate %d fps (%s)", |
| rate >> 16, hw_overload ? "HW overload" : strerror(errno)); |
| return false; |
| } |
| operating_rate = rate; |
| DEBUG_PRINT_LOW("Operating Rate Set = %d fps", rate >> 16); |
| return true; |
| } |
| |
| bool venc_dev::venc_get_profile_level(OMX_U32 *eProfile,OMX_U32 *eLevel) |
| { |
| bool status = true; |
| |
| if (eProfile == NULL || eLevel == NULL) { |
| return false; |
| } |
| |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE: |
| *eProfile = OMX_VIDEO_MPEG4ProfileSimple; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE: |
| *eProfile = OMX_VIDEO_MPEG4ProfileAdvancedSimple; |
| break; |
| default: |
| *eProfile = OMX_VIDEO_MPEG4ProfileMax; |
| status = false; |
| break; |
| } |
| |
| if (!status) { |
| return status; |
| } |
| |
| //profile level |
| switch (profile_level.level) { |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_0: |
| *eLevel = OMX_VIDEO_MPEG4Level0; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B: |
| *eLevel = OMX_VIDEO_MPEG4Level0b; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_1: |
| *eLevel = OMX_VIDEO_MPEG4Level1; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_2: |
| *eLevel = OMX_VIDEO_MPEG4Level2; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_3: |
| *eLevel = OMX_VIDEO_MPEG4Level3; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_4: |
| *eLevel = OMX_VIDEO_MPEG4Level4; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_LEVEL_5: |
| *eLevel = OMX_VIDEO_MPEG4Level5; |
| break; |
| default: |
| *eLevel = OMX_VIDEO_MPEG4LevelMax; |
| status = false; |
| break; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| if (codec_profile.profile == VEN_PROFILE_H263_BASELINE) { |
| *eProfile = OMX_VIDEO_H263ProfileBaseline; |
| } else { |
| *eProfile = OMX_VIDEO_H263ProfileMax; |
| return false; |
| } |
| |
| switch (profile_level.level) { |
| case VEN_LEVEL_H263_10: |
| *eLevel = OMX_VIDEO_H263Level10; |
| break; |
| case VEN_LEVEL_H263_20: |
| *eLevel = OMX_VIDEO_H263Level20; |
| break; |
| case VEN_LEVEL_H263_30: |
| *eLevel = OMX_VIDEO_H263Level30; |
| break; |
| case VEN_LEVEL_H263_40: |
| *eLevel = OMX_VIDEO_H263Level40; |
| break; |
| case VEN_LEVEL_H263_45: |
| *eLevel = OMX_VIDEO_H263Level45; |
| break; |
| case VEN_LEVEL_H263_50: |
| *eLevel = OMX_VIDEO_H263Level50; |
| break; |
| case VEN_LEVEL_H263_60: |
| *eLevel = OMX_VIDEO_H263Level60; |
| break; |
| case VEN_LEVEL_H263_70: |
| *eLevel = OMX_VIDEO_H263Level70; |
| break; |
| default: |
| *eLevel = OMX_VIDEO_H263LevelMax; |
| status = false; |
| break; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: |
| *eProfile = OMX_VIDEO_AVCProfileBaseline; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: |
| *eProfile = QOMX_VIDEO_AVCProfileConstrainedBaseline; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: |
| *eProfile = OMX_VIDEO_AVCProfileMain; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: |
| *eProfile = OMX_VIDEO_AVCProfileHigh; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED: |
| *eProfile = OMX_VIDEO_AVCProfileExtended; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10: |
| *eProfile = OMX_VIDEO_AVCProfileHigh10; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422: |
| *eProfile = OMX_VIDEO_AVCProfileHigh422; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE: |
| *eProfile = OMX_VIDEO_AVCProfileHigh444; |
| break; |
| default: |
| *eProfile = OMX_VIDEO_AVCProfileMax; |
| status = false; |
| break; |
| } |
| |
| if (!status) { |
| return status; |
| } |
| |
| switch (profile_level.level) { |
| case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: |
| *eLevel = OMX_VIDEO_AVCLevel1; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_1B: |
| *eLevel = OMX_VIDEO_AVCLevel1b; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: |
| *eLevel = OMX_VIDEO_AVCLevel11; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: |
| *eLevel = OMX_VIDEO_AVCLevel12; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: |
| *eLevel = OMX_VIDEO_AVCLevel13; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: |
| *eLevel = OMX_VIDEO_AVCLevel2; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: |
| *eLevel = OMX_VIDEO_AVCLevel21; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: |
| *eLevel = OMX_VIDEO_AVCLevel22; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: |
| *eLevel = OMX_VIDEO_AVCLevel3; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: |
| *eLevel = OMX_VIDEO_AVCLevel31; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: |
| *eLevel = OMX_VIDEO_AVCLevel32; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: |
| *eLevel = OMX_VIDEO_AVCLevel4; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_4_1: |
| *eLevel = OMX_VIDEO_AVCLevel41; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_4_2: |
| *eLevel = OMX_VIDEO_AVCLevel42; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_5_0: |
| *eLevel = OMX_VIDEO_AVCLevel5; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_5_1: |
| *eLevel = OMX_VIDEO_AVCLevel51; |
| break; |
| case V4L2_MPEG_VIDEO_H264_LEVEL_5_2: |
| *eLevel = OMX_VIDEO_AVCLevel52; |
| break; |
| default : |
| *eLevel = OMX_VIDEO_AVCLevelMax; |
| status = false; |
| break; |
| } |
| } |
| else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDC_VIDEO_VP8_UNUSED: |
| *eProfile = OMX_VIDEO_VP8ProfileMain; |
| break; |
| default: |
| *eProfile = OMX_VIDEO_VP8ProfileMax; |
| status = false; |
| break; |
| } |
| if (!status) { |
| return status; |
| } |
| |
| switch (profile_level.level) { |
| case V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_0: |
| *eLevel = OMX_VIDEO_VP8Level_Version0; |
| break; |
| case V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_1: |
| *eLevel = OMX_VIDEO_VP8Level_Version1; |
| break; |
| default: |
| *eLevel = OMX_VIDEO_VP8LevelMax; |
| status = false; |
| break; |
| } |
| } |
| |
| return status; |
| } |
| |
| bool venc_dev::venc_validate_profile_level(OMX_U32 *eProfile, OMX_U32 *eLevel) |
| { |
| OMX_U32 new_profile = 0, new_level = 0; |
| unsigned const int *profile_tbl = NULL; |
| OMX_U32 mb_per_frame, mb_per_sec; |
| bool profile_level_found = false; |
| |
| DEBUG_PRINT_LOW("Init profile table for respective codec"); |
| |
| //validate the ht,width,fps,bitrate and set the appropriate profile and level |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_MPEG4) { |
| if (*eProfile == 0) { |
| if (!m_profile_set) { |
| *eProfile = OMX_VIDEO_MPEG4ProfileSimple; |
| } else { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE: |
| *eProfile = OMX_VIDEO_MPEG4ProfileAdvancedSimple; |
| break; |
| case V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE: |
| *eProfile = OMX_VIDEO_MPEG4ProfileSimple; |
| break; |
| default: |
| DEBUG_PRINT_LOW("%s(): Unknown Error", __func__); |
| return false; |
| } |
| } |
| } |
| |
| if (*eLevel == 0 && !m_level_set) { |
| *eLevel = OMX_VIDEO_MPEG4LevelMax; |
| } |
| |
| if (*eProfile == OMX_VIDEO_MPEG4ProfileSimple) { |
| profile_tbl = (unsigned int const *)mpeg4_profile_level_table; |
| } else if (*eProfile == OMX_VIDEO_MPEG4ProfileAdvancedSimple) { |
| profile_tbl = (unsigned int const *) |
| (&mpeg4_profile_level_table[MPEG4_ASP_START]); |
| } else { |
| DEBUG_PRINT_LOW("Unsupported MPEG4 profile type %lu", *eProfile); |
| return false; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| if (*eProfile == 0) { |
| if (!m_profile_set) { |
| *eProfile = OMX_VIDEO_AVCProfileBaseline; |
| } else { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: |
| *eProfile = OMX_VIDEO_AVCProfileBaseline; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: |
| *eProfile = QOMX_VIDEO_AVCProfileConstrainedBaseline; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: |
| *eProfile = OMX_VIDEO_AVCProfileMain; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED: |
| *eProfile = OMX_VIDEO_AVCProfileExtended; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: |
| *eProfile = OMX_VIDEO_AVCProfileHigh; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10: |
| *eProfile = OMX_VIDEO_AVCProfileHigh10; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422: |
| *eProfile = OMX_VIDEO_AVCProfileHigh422; |
| break; |
| case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE: |
| *eProfile = OMX_VIDEO_AVCProfileHigh444; |
| break; |
| default: |
| DEBUG_PRINT_LOW("%s(): Unknown Error", __func__); |
| return false; |
| } |
| } |
| } |
| |
| if (*eLevel == 0 && !m_level_set) { |
| *eLevel = OMX_VIDEO_AVCLevelMax; |
| } |
| |
| if ((*eProfile == OMX_VIDEO_AVCProfileBaseline) || |
| (*eProfile == QOMX_VIDEO_AVCProfileConstrainedBaseline)) { |
| profile_tbl = (unsigned int const *)h264_profile_level_table; |
| } else if (*eProfile == OMX_VIDEO_AVCProfileHigh) { |
| profile_tbl = (unsigned int const *) |
| (&h264_profile_level_table[H264_HP_START]); |
| } else if (*eProfile == OMX_VIDEO_AVCProfileMain) { |
| profile_tbl = (unsigned int const *) |
| (&h264_profile_level_table[H264_MP_START]); |
| } else { |
| DEBUG_PRINT_LOW("Unsupported AVC profile type %lu", *eProfile); |
| return false; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H263) { |
| if (*eProfile == 0) { |
| if (!m_profile_set) { |
| *eProfile = OMX_VIDEO_H263ProfileBaseline; |
| } else { |
| switch (codec_profile.profile) { |
| case VEN_PROFILE_H263_BASELINE: |
| *eProfile = OMX_VIDEO_H263ProfileBaseline; |
| break; |
| default: |
| DEBUG_PRINT_LOW("%s(): Unknown Error", __func__); |
| return false; |
| } |
| } |
| } |
| |
| if (*eLevel == 0 && !m_level_set) { |
| *eLevel = OMX_VIDEO_H263LevelMax; |
| } |
| |
| if (*eProfile == OMX_VIDEO_H263ProfileBaseline) { |
| profile_tbl = (unsigned int const *)h263_profile_level_table; |
| } else { |
| DEBUG_PRINT_LOW("Unsupported H.263 profile type %lu", *eProfile); |
| return false; |
| } |
| } else if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_VP8) { |
| if (*eProfile == 0) { |
| *eProfile = OMX_VIDEO_VP8ProfileMain; |
| } else { |
| switch (codec_profile.profile) { |
| case V4L2_MPEG_VIDC_VIDEO_VP8_UNUSED: |
| *eProfile = OMX_VIDEO_VP8ProfileMain; |
| break; |
| default: |
| DEBUG_PRINT_ERROR("%s(): Unknown VP8 profile", __func__); |
| return false; |
| } |
| } |
| if (*eLevel == 0) { |
| switch (profile_level.level) { |
| case V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_0: |
| *eLevel = OMX_VIDEO_VP8Level_Version0; |
| break; |
| case V4L2_MPEG_VIDC_VIDEO_VP8_VERSION_1: |
| *eLevel = OMX_VIDEO_VP8Level_Version1; |
| break; |
| default: |
| DEBUG_PRINT_ERROR("%s(): Unknown VP8 level", __func__); |
| return false; |
| } |
| } |
| return true; |
| } else { |
| DEBUG_PRINT_LOW("Invalid codec type"); |
| return false; |
| } |
| |
| mb_per_frame = ((m_sVenc_cfg.dvs_height + 15) >> 4)* |
| ((m_sVenc_cfg.dvs_width + 15)>> 4); |
| |
| if ((mb_per_frame >= 3600) && (m_sVenc_cfg.codectype == (unsigned long) V4L2_PIX_FMT_MPEG4)) { |
| if (codec_profile.profile == (unsigned long) V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE) |
| profile_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5; |
| |
| if (codec_profile.profile == (unsigned long) V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE) |
| profile_level.level = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5; |
| |
| { |
| new_level = profile_level.level; |
| new_profile = codec_profile.profile; |
| return true; |
| } |
| } |
| |
| mb_per_sec = mb_per_frame * m_sVenc_cfg.fps_num / m_sVenc_cfg.fps_den; |
| |
| do { |
| if (mb_per_frame <= (unsigned int)profile_tbl[0]) { |
| if (mb_per_sec <= (unsigned int)profile_tbl[1]) { |
| if (m_sVenc_cfg.targetbitrate <= (unsigned int)profile_tbl[2]) { |
| if (m_sVenc_cfg.codectype == V4L2_PIX_FMT_H264) { |
| if ((ltrinfo.count + 2) <= MIN((unsigned int) (profile_tbl[5] / mb_per_frame), MAXDPB)) { |
| new_level = (int)profile_tbl[3]; |
| new_profile = (int)profile_tbl[4]; |
| profile_level_found = true; |
| DEBUG_PRINT_LOW("Appropriate H264 profile/level for count: %u is %lu/%lu, maxDPB: %u", |
| ltrinfo.count, new_profile, new_level, |
| MIN((unsigned int) (profile_tbl[5] / mb_per_frame), MAXDPB)); |
| break; |
| } |
| } else { |
| new_level = (int)profile_tbl[3]; |
| new_profile = (int)profile_tbl[4]; |
| profile_level_found = true; |
| DEBUG_PRINT_LOW("Appropriate profile/level found %lu/%lu", new_profile, new_level); |
| break; |
| } |
| } |
| } |
| } |
| profile_tbl = profile_tbl + MAX_PROFILE_PARAMS; |
| } while (profile_tbl[0] != 0); |
| |
| if (profile_level_found != true) { |
| DEBUG_PRINT_LOW("ERROR: Unsupported profile/level"); |
| return false; |
| } |
| |
| if ((*eLevel == OMX_VIDEO_MPEG4LevelMax) || (*eLevel == OMX_VIDEO_AVCLevelMax) |
| || (*eLevel == OMX_VIDEO_H263LevelMax || (*eLevel == OMX_VIDEO_VP8ProfileMax))) { |
| *eLevel = new_level; |
| } |
| |
| DEBUG_PRINT_LOW("%s: Returning with eProfile = %lu" |
| "Level = %lu", __func__, *eProfile, *eLevel); |
| |
| return true; |
| } |
| #ifdef _ANDROID_ICS_ |
| bool venc_dev::venc_set_meta_mode(bool mode) |
| { |
| metadatamode = 1; |
| return true; |
| } |
| #endif |
| |
| bool venc_dev::venc_is_video_session_supported(unsigned long width, |
| unsigned long height) |
| { |
| if ((width * height < capability.min_width * capability.min_height) || |
| (width * height > capability.max_width * capability.max_height)) { |
| DEBUG_PRINT_ERROR( |
| "Unsupported video resolution WxH = (%lu)x(%lu) supported range = min (%d)x(%d) - max (%d)x(%d)", |
| width, height, capability.min_width, capability.min_height, |
| capability.max_width, capability.max_height); |
| return false; |
| } |
| |
| DEBUG_PRINT_LOW("video session supported"); |
| return true; |
| } |