| /* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are |
| met: |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above |
| copyright notice, this list of conditions and the following |
| disclaimer in the documentation and/or other materials provided |
| with the distribution. |
| * Neither the name of The Linux Foundation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /*=========================================================================== |
| |
| INCLUDE FILES |
| |
| ===========================================================================*/ |
| #include "pm_app_smbchg.h" |
| #include "pm_smbchg_chgr.h" |
| #include "pm_smbchg_bat_if.h" |
| #include "pm_app_smbchg.h" |
| #include "pm_fg_adc_usr.h" |
| #include "pm_fg_driver.h" |
| #include "pm_smbchg_driver.h" |
| #include "pm_comm.h" |
| #include "pm_smbchg_dc_chgpth.h" |
| #include <kernel/thread.h> |
| #include <debug.h> |
| #include <platform/timer.h> |
| #include <sys/types.h> |
| #include <target.h> |
| #include <pm8x41.h> |
| #include <bits.h> |
| #include <board.h> |
| #include <smem.h> |
| |
| /*=========================================================================== |
| |
| PROTOTYPES |
| |
| ===========================================================================*/ |
| |
| |
| /*=========================================================================== |
| |
| GLOBAL TYPE DEFINITIONS |
| |
| ===========================================================================*/ |
| #define PM_REG_CONFIG_SETTLE_DELAY 175 * 1000 //175ms ; Delay required for battery voltage de-glitch time |
| #define PM_WEAK_BATTERY_CHARGING_DELAY 500 * 1000 //500ms |
| #define PM_WIPOWER_START_CHARGING_DELAY 3500 * 1000 //3.5sec |
| #define PM_MIN_ADC_READY_DELAY 1 * 1000 //1ms |
| #define PM_MAX_ADC_READY_DELAY 2000 //2s |
| #define SBL_PACKED_SRAM_CONFIG_SIZE 3 |
| #define PM_CHARGE_DISPLAY_TIMEOUT 5 * 1000 //5 secs |
| #define boot_log_message(...) dprintf(CRITICAL, __VA_ARGS__) |
| |
| static pm_smbchg_bat_if_low_bat_thresh_type pm_dbc_bootup_volt_threshold; |
| /* Need to maintain flags to track |
| * 1. charge_in_progress: Charging progress and exit the loop once charging is completed. |
| * 2. display_initialized: Track if the display is already initialized to make sure display |
| * thread does not reinitialize the display again. |
| * 3. display_shutdown_in_prgs: To avoid race condition between regualr display initialization and |
| * display shutdown in display thread. |
| */ |
| |
| static bool display_initialized; |
| static bool charge_in_progress; |
| static bool display_shutdown_in_prgs; |
| static bool pm_app_read_from_sram; |
| |
| char panel_name[256]; |
| |
| pm_err_flag_type pm_appsbl_chg_config_vbat_low_threshold(uint32 device_index, pm_smbchg_specific_data_type *chg_param_ptr); |
| static void display_thread_initialize(); |
| static void pm_app_ima_read_voltage(uint32_t *); |
| static void pm_app_pmi8994_read_voltage(uint32_t *voltage); |
| /*=========================================================================== |
| |
| FUNCTION IMPLEMENTATION |
| |
| ===========================================================================*/ |
| pm_err_flag_type pm_appsbl_chg_check_weak_battery_status(uint32 device_index) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| pm_smbchg_specific_data_type *chg_param_ptr = NULL; |
| pm_smbchg_chgr_chgr_status_type vbatt_chging_status; |
| boolean hot_bat_hard_lim_rt_sts = FALSE; |
| boolean cold_bat_hard_lim_rt_sts = FALSE; |
| boolean vbatt_weak_status = TRUE; |
| boolean adc_reading_ready = FALSE; |
| boolean bat_present = TRUE; |
| uint32 vbat_adc = 0; |
| uint16 wait_index = 0; |
| boolean vbatt_status = FALSE; |
| pm_smbchg_misc_src_detect_type chgr_src_detected; |
| boolean configure_icl_flag = FALSE; |
| boolean chg_prog_message_flag = FALSE; |
| pm_smbchg_usb_chgpth_pwr_pth_type charger_path = PM_SMBCHG_USB_CHGPTH_PWR_PATH__INVALID;; uint32 bootup_threshold; |
| |
| pm_smbchg_driver_init(device_index); |
| pm_fg_driver_init(device_index); |
| |
| chg_param_ptr = (pm_smbchg_specific_data_type*)pm_target_information_get_specific_info(); |
| ASSERT(chg_param_ptr); |
| bootup_threshold = chg_param_ptr->bootup_battery_theshold_mv; |
| |
| if(chg_param_ptr->dbc_bootup_volt_threshold.enable_config == PM_ENABLE_CONFIG) |
| { |
| //Configure Vlowbatt threshold: Used by PMI on next bootup |
| err_flag |= pm_appsbl_chg_config_vbat_low_threshold(device_index, chg_param_ptr); |
| } |
| |
| //Check Battery presence |
| err_flag |= pm_smbchg_bat_if_get_bat_pres_status(device_index, &bat_present); |
| if( bat_present == FALSE ) |
| { |
| dprintf(CRITICAL, "Booting up to HLOS: Charger is Connected and NO battery\n"); |
| return err_flag; |
| } |
| |
| |
| //Detect the typpe of charger used |
| //err_flag |= pm_smbchg_usb_chgpth_get_pwr_pth(device_index, & |
| err_flag |= pm_smbchg_get_charger_path(device_index, &charger_path); |
| if (charger_path == PM_SMBCHG_USB_CHGPTH_PWR_PATH__DC_CHARGER) |
| { |
| |
| bootup_threshold = chg_param_ptr->wipwr_bootup_battery_theshold_mv; |
| } |
| else if (charger_path == PM_SMBCHG_USB_CHGPTH_PWR_PATH__USB_CHARGER) |
| { |
| bootup_threshold = chg_param_ptr->bootup_battery_theshold_mv; |
| } |
| |
| //Enable BMS FG Algorithm BCL |
| err_flag |= pm_fg_adc_usr_enable_bcl_monitoring(device_index, TRUE); |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) |
| { |
| return err_flag; |
| } |
| |
| |
| while( vbatt_weak_status == TRUE ) //While battery is in weak state |
| { |
| //Check Vbatt ADC level |
| err_flag |= pm_fg_adc_usr_get_bcl_values(device_index, &adc_reading_ready); //Check if Vbatt ADC is ready |
| |
| //Check if Vbatt ADC is Ready |
| for (wait_index = 0; wait_index < PM_MAX_ADC_READY_DELAY; wait_index++) |
| { |
| if(adc_reading_ready == FALSE) |
| { |
| udelay(PM_MIN_ADC_READY_DELAY); |
| err_flag |= pm_fg_adc_usr_get_bcl_values(device_index,&adc_reading_ready); |
| } |
| else |
| { |
| break; |
| } |
| } |
| |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) { break;} |
| |
| if ( adc_reading_ready) |
| { |
| err_flag |= pm_fg_adc_usr_get_calibrated_vbat(device_index, &vbat_adc); //Read calibrated vbatt ADC |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) { break;} |
| |
| /* FG_ADC hardware reports values that are off by ~120 to 200 mV, this results in boot up failures |
| * on devices that boot up with battery close to threshold value. If the FG_ADC voltage is less than |
| * threshold then read the voltage from a more accurate source FG SRAM to ascertain the voltage is indeed low. |
| */ |
| if (!pm_app_read_from_sram && (vbat_adc <= bootup_threshold)) |
| { |
| if (board_pmic_type(PMIC_IS_PMI8996)) |
| pm_app_ima_read_voltage(&vbat_adc); |
| else |
| pm_app_pmi8994_read_voltage(&vbat_adc); |
| |
| pm_app_read_from_sram = true; |
| } |
| |
| //Check if ADC reading is within limit |
| if ( vbat_adc >= bootup_threshold) //Compaire it with SW bootup threshold |
| { |
| vbatt_weak_status = FALSE; |
| break; //bootup |
| } |
| dprintf(INFO, "Vbatt Level: %u\n", vbat_adc); |
| } |
| else |
| { |
| boot_log_message("ERROR: ADC Reading is NOT Ready\n"); |
| err_flag |= PM_ERR_FLAG__ADC_NOT_READY; |
| break; |
| } |
| |
| //Check if USB charger is SDP |
| err_flag |= pm_smbchg_misc_chgr_port_detected(device_index, &chgr_src_detected); |
| if (chgr_src_detected == PM_SMBCHG_MISC_SRC_DETECT_SDP) |
| { |
| if (configure_icl_flag == FALSE) |
| { |
| //Check Vlow_batt status |
| err_flag |= pm_smbchg_chgr_vbat_sts(device_index, &vbatt_status); |
| if (vbatt_status) |
| { |
| //set ICL to 500mA |
| err_flag |= pm_smbchg_usb_chgpth_set_cmd_il(device_index, PM_SMBCHG_USBCHGPTH_CMD_IL__USB51_MODE, TRUE); |
| err_flag |= pm_smbchg_usb_chgpth_set_cmd_il(device_index, PM_SMBCHG_USBCHGPTH_CMD_IL__USBIN_MODE_CHG, FALSE); |
| configure_icl_flag = TRUE; |
| } |
| } |
| } |
| |
| if (chg_prog_message_flag == FALSE) |
| { |
| //Ensure that Charging is enabled |
| err_flag |= pm_smbchg_chgr_enable_src(device_index, FALSE); |
| err_flag |= pm_smbchg_chgr_set_chg_polarity_low(device_index, TRUE); |
| err_flag |= pm_smbchg_bat_if_config_chg_cmd(device_index, PM_SMBCHG_BAT_IF_CMD__EN_BAT_CHG, FALSE); |
| udelay(PM_WEAK_BATTERY_CHARGING_DELAY); |
| } |
| |
| //Check if JEITA check is enabled |
| if (chg_param_ptr->enable_jeita_hard_limit_check == TRUE) |
| { |
| //Read JEITA condition |
| err_flag |= pm_smbchg_bat_if_irq_status(device_index, PM_SMBCHG_BAT_IF_HOT_BAT_HARD_LIM, PM_IRQ_STATUS_RT, &hot_bat_hard_lim_rt_sts ); |
| err_flag |= pm_smbchg_bat_if_irq_status(device_index, PM_SMBCHG_BAT_IF_COLD_BAT_HARD_LIM, PM_IRQ_STATUS_RT, &cold_bat_hard_lim_rt_sts); |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) { break;} |
| |
| if ( ( hot_bat_hard_lim_rt_sts == TRUE ) || (cold_bat_hard_lim_rt_sts == TRUE) ) |
| { |
| continue; // Stay in this loop as long as JEITA Hard Hot/Cold limit is exceeded |
| } |
| } |
| |
| if (!charge_in_progress) |
| dprintf(INFO,"APPSBL Weak Battery charging: Start\n"); |
| |
| charge_in_progress = true; |
| #if DISPLAY_SPLASH_SCREEN |
| display_thread_initialize(); |
| #endif |
| /* Wait for 500 msecs before looking for vbat */ |
| udelay(PM_WEAK_BATTERY_CHARGING_DELAY); //500ms |
| |
| //Check if Charging in progress |
| err_flag |= pm_smbchg_chgr_get_chgr_sts(device_index, &vbatt_chging_status); |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) { break;} |
| |
| if ( vbatt_chging_status.charging_type == PM_SMBCHG_CHGR_NO_CHARGING ) |
| { |
| if (charger_path == PM_SMBCHG_USB_CHGPTH_PWR_PATH__DC_CHARGER) |
| { |
| //Delay for 3.5sec for charging to begin, and check charging status again prior to shutting down. |
| udelay(PM_WIPOWER_START_CHARGING_DELAY); //3500ms |
| |
| err_flag |= pm_smbchg_chgr_get_chgr_sts(device_index, &vbatt_chging_status); |
| if ( err_flag != PM_ERR_FLAG__SUCCESS ) { break;} |
| |
| if ( vbatt_chging_status.charging_type == PM_SMBCHG_CHGR_NO_CHARGING ) |
| { |
| boot_log_message("ERROR: Charging is NOT in progress: Shutting Down\n"); |
| shutdown_device(); |
| } |
| } |
| else |
| { |
| boot_log_message("ERROR: Charging is NOT in progress: Shutting Down\n"); |
| shutdown_device(); |
| } |
| } |
| else |
| { |
| #ifdef DEBUG_CHARGER |
| dprintf(INFO, "APPSBL Charging in Progress....\n"); |
| #endif |
| chg_prog_message_flag = TRUE; |
| } |
| }//while |
| |
| |
| if (charger_path == PM_SMBCHG_USB_CHGPTH_PWR_PATH__DC_CHARGER) |
| { |
| //If battery is good, Toggle SHDN_N_CLEAR_CMD Reg: Set 0x1340[6] to 1 and then 0 |
| err_flag = pm_smbchg_usb_chgpth_set_cmd_il(device_index, PM_SMBCHG_USBCHGPTH_CMD_IL__SHDN_N_CLEAR_CMD, TRUE); |
| err_flag = pm_smbchg_usb_chgpth_set_cmd_il(device_index, PM_SMBCHG_USBCHGPTH_CMD_IL__SHDN_N_CLEAR_CMD, FALSE); |
| } |
| |
| if (charge_in_progress) |
| dprintf(INFO, "APPSBL Weak Battery Charging: Done \n"); |
| |
| charge_in_progress = false; |
| return err_flag; |
| } |
| |
| |
| |
| pm_err_flag_type pm_smbchg_get_charger_path(uint32 device_index, pm_smbchg_usb_chgpth_pwr_pth_type* charger_path) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| boolean usbin_uv_status = TRUE; |
| boolean usbin_ov_status = TRUE; |
| boolean dcbin_uv_status = TRUE; |
| boolean dcbin_ov_status = TRUE; |
| |
| //DC charger present, if DCIN_UV_RT_STS and DCIN_UV_RT_STS status is 0 (INT_RT_STS : 0x1410[1] and [0] == 0) |
| err_flag |= pm_smbchg_dc_chgpth_irq_status(device_index, PM_SMBCHG_DC_CHGPTH_DCBIN_UV, PM_IRQ_STATUS_RT, &dcbin_uv_status); |
| err_flag |= pm_smbchg_dc_chgpth_irq_status(device_index, PM_SMBCHG_DC_CHGPTH_DCBIN_OV, PM_IRQ_STATUS_RT, &dcbin_ov_status); |
| //USB charger present, if USBIN_UV_RT_STS and USBIN_OV_RT_STS status is 0 ( INT_RT_STS : 0x1310[1] and [0] == 0) |
| err_flag |= pm_smbchg_usb_chgpth_irq_status(device_index, PM_SMBCHG_USB_CHGPTH_USBIN_UV, PM_IRQ_STATUS_RT, &usbin_uv_status); |
| err_flag |= pm_smbchg_usb_chgpth_irq_status(device_index, PM_SMBCHG_USB_CHGPTH_USBIN_OV, PM_IRQ_STATUS_RT, &usbin_ov_status); |
| |
| if((dcbin_uv_status == FALSE) && (dcbin_ov_status == FALSE)) |
| { |
| *charger_path = PM_SMBCHG_USB_CHGPTH_PWR_PATH__DC_CHARGER; |
| } |
| else if((usbin_uv_status == FALSE) && (usbin_ov_status == FALSE)) |
| { |
| *charger_path = PM_SMBCHG_USB_CHGPTH_PWR_PATH__USB_CHARGER; |
| } |
| else |
| { |
| *charger_path = PM_SMBCHG_USB_CHGPTH_PWR_PATH__INVALID; |
| } |
| |
| return err_flag; |
| } |
| |
| |
| |
| pm_err_flag_type pm_appsbl_chg_config_vbat_low_threshold(uint32 device_index, pm_smbchg_specific_data_type *chg_param_ptr) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| |
| pm_dbc_bootup_volt_threshold = chg_param_ptr->dbc_bootup_volt_threshold.vlowbatt_threshold; |
| |
| if (chg_param_ptr->dbc_bootup_volt_threshold.enable_config == PM_ENABLE_CONFIG) |
| { |
| if (pm_dbc_bootup_volt_threshold >= PM_SMBCHG_BAT_IF_LOW_BATTERY_THRESH_INVALID) |
| { |
| err_flag = PM_ERR_FLAG__INVALID_VBATT_INDEXED; |
| return err_flag; |
| } |
| |
| err_flag = pm_smbchg_bat_if_set_low_batt_volt_threshold(device_index, pm_dbc_bootup_volt_threshold); |
| #ifdef DEBUG_CHARGER |
| dprintf(INFO,"Configure Vlowbatt threshold"); |
| #endif |
| } |
| |
| return err_flag; |
| } |
| |
| #ifndef LK |
| pm_err_flag_type pm_sbl_config_fg_sram(uint32 device_index) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| FgSramAddrDataEx_type *sram_data_ptr = NULL; |
| FgSramAddrDataEx_type pm_sbl_sram_data[SBL_PACKED_SRAM_CONFIG_SIZE]; |
| pm_model_type pmic_model = PMIC_IS_INVALID; |
| boolean sram_enable_config_flag = FALSE; |
| |
| //Check if any SRAM configuration is needed |
| sram_data_ptr = (FgSramAddrDataEx_type*)pm_target_information_get_specific_info(PM_PROP_FG_SPECIFIC_DATA); |
| CORE_VERIFY_PTR(sram_data_ptr); |
| for (int i=0; i< SBL_SRAM_CONFIG_SIZE; i++) |
| { |
| sram_enable_config_flag |= sram_data_ptr[i].EnableConfig; |
| } |
| |
| |
| if (sram_enable_config_flag == TRUE ) |
| { |
| pmic_model = pm_get_pmic_model(device_index); //Check if PMIC exists |
| if ( (pmic_model != PMIC_IS_INVALID) || (pmic_model != PMIC_IS_UNKNOWN) ) |
| { |
| //boot_log_message("BEGIN: Configure FG SRAM"); |
| |
| //Pre-process JEITA data |
| pm_sbl_sram_data[0].SramAddr = sram_data_ptr[0].SramAddr; |
| pm_sbl_sram_data[0].SramData = (sram_data_ptr[3].SramData << 24)| |
| (sram_data_ptr[2].SramData << 16)| |
| (sram_data_ptr[1].SramData << 8)| |
| sram_data_ptr[0].SramData; |
| pm_sbl_sram_data[0].DataOffset = sram_data_ptr[0].DataOffset; |
| pm_sbl_sram_data[0].DataSize = 4; |
| //Set JEITA threshould configuration flag |
| pm_sbl_sram_data[0].EnableConfig = sram_data_ptr[0].EnableConfig | sram_data_ptr[1].EnableConfig | |
| sram_data_ptr[2].EnableConfig | sram_data_ptr[3].EnableConfig; |
| |
| //Pre-process Thermistor Beta Data |
| //thremistor_c1_coeff |
| pm_sbl_sram_data[1] = sram_data_ptr[4]; |
| |
| //thremistor_c2_coeff and thremistor_c3_coeff |
| pm_sbl_sram_data[2].SramAddr = sram_data_ptr[5].SramAddr; |
| pm_sbl_sram_data[2].SramData = (sram_data_ptr[6].SramData << 16) | sram_data_ptr[5].SramData; |
| pm_sbl_sram_data[2].DataOffset = sram_data_ptr[5].DataOffset; |
| pm_sbl_sram_data[2].DataSize = 4; |
| pm_sbl_sram_data[2].EnableConfig = sram_data_ptr[5].EnableConfig; |
| |
| //Configure SRAM Data |
| err_flag |= PmicFgSram_ProgBurstAccessEx(device_index, pm_sbl_sram_data, SBL_PACKED_SRAM_CONFIG_SIZE); |
| |
| //Test: Read Back |
| //err_flag |= PmicFgSram_Dump(device_index, 0x0454, 0x0454); |
| //err_flag |= PmicFgSram_Dump(device_index, 0x0444, 0x0448); |
| //err_flag |= PmicFgSram_Dump(device_index, 0x0448, 0x0452); |
| |
| //boot_log_message("END: Configure FG SRAM"); |
| } |
| } |
| |
| return err_flag; |
| } |
| |
| |
| |
| |
| pm_err_flag_type pm_sbl_config_chg_parameters(uint32 device_index) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| static pm_smbchg_specific_data_type *chg_param_ptr; |
| |
| if(chg_param_ptr == NULL) |
| { |
| chg_param_ptr = (pm_smbchg_specific_data_type*)pm_target_information_get_specific_info(PM_PROP_SMBCHG_SPECIFIC_DATA); |
| CORE_VERIFY_PTR(chg_param_ptr); |
| } |
| |
| //Vlowbatt Threshold |
| // - Done on: pm_sbl_chg_config_vbat_low_threshold() |
| |
| //Charger Path Input Priority |
| if (chg_param_ptr->chgpth_input_priority.enable_config == PM_ENABLE_CONFIG) |
| { |
| pm_smbchg_chgpth_input_priority_type chgpth_priority = chg_param_ptr->chgpth_input_priority.chgpth_input_priority; |
| if (chgpth_priority < PM_SMBCHG_USBCHGPTH_INPUT_PRIORITY_INVALID) |
| { |
| err_flag |= pm_smbchg_chgpth_set_input_priority(device_index, chgpth_priority); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| |
| //Battery Missing Detection Source |
| if (chg_param_ptr->bat_miss_detect_src.enable_config == PM_ENABLE_CONFIG) |
| { |
| pm_smbchg_bat_miss_detect_src_type batt_missing_det_src = chg_param_ptr->bat_miss_detect_src.bat_missing_detection_src; |
| if (batt_missing_det_src < PM_SMBCHG_BAT_IF_BAT_MISS_DETECT_SRC_INVALID) |
| { |
| err_flag |= pm_smbchg_bat_if_set_bat_missing_detection_src(device_index, batt_missing_det_src); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| //WDOG Timeout |
| if (chg_param_ptr->wdog_timeout.enable_config == PM_ENABLE_CONFIG) |
| { |
| pm_smbchg_wdog_timeout_type wdog_timeout = chg_param_ptr->wdog_timeout.wdog_timeout; |
| if (wdog_timeout < PM_SMBCHG_MISC_WD_TMOUT_INVALID) |
| { |
| err_flag |= pm_smbchg_misc_set_wdog_timeout(device_index, wdog_timeout); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| |
| //Enable WDOG |
| if (chg_param_ptr->enable_wdog.enable_config == PM_ENABLE_CONFIG) |
| { |
| pm_smbchg_wdog_timeout_type enable_smbchg_wdog = chg_param_ptr->enable_wdog.enable_wdog; |
| err_flag |= pm_smbchg_misc_enable_wdog(device_index, enable_smbchg_wdog); |
| } |
| |
| |
| //FAST Charging Current |
| if (chg_param_ptr->fast_chg_i.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 fast_chg_i_ma = chg_param_ptr->fast_chg_i.fast_chg_i_ma; |
| if ((fast_chg_i_ma >= 300) && (fast_chg_i_ma <= 3000) ) |
| { |
| err_flag |= pm_smbchg_chgr_set_fast_chg_i(device_index, fast_chg_i_ma); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| //Pre Charge Current |
| if (chg_param_ptr->pre_chg_i.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 pre_chg_i_ma = chg_param_ptr->pre_chg_i.pre_chg_i_ma; |
| if ((pre_chg_i_ma >= 100) && (pre_chg_i_ma <= 550) ) |
| { |
| err_flag |= pm_smbchg_chgr_set_pre_chg_i(device_index, pre_chg_i_ma); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| //Pre to Fast Charge Current |
| if (chg_param_ptr->pre_to_fast_chg_theshold_mv.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 p2f_chg_mv = chg_param_ptr->pre_to_fast_chg_theshold_mv.pre_to_fast_chg_theshold_mv; |
| if ((p2f_chg_mv >= 2400) && (p2f_chg_mv <= 3000) ) |
| { |
| err_flag |= pm_smbchg_chgr_set_p2f_threshold(device_index, p2f_chg_mv); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| //Float Voltage : 3600mV to 4500 mv |
| if (chg_param_ptr->float_volt_theshold_mv.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 float_volt_mv = chg_param_ptr->float_volt_theshold_mv.float_volt_theshold_mv; |
| if ((float_volt_mv >= 3600) && (float_volt_mv <= 4500)) |
| { |
| err_flag |= pm_smbchg_chgr_set_float_volt(device_index, float_volt_mv); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| |
| //USBIN Input Current Limit :Valid value is 300 to 3000mAmp |
| if (chg_param_ptr->usbin_input_current_limit.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 usbin_i_limit_ma = chg_param_ptr->usbin_input_current_limit.usbin_input_current_limit; |
| if ((usbin_i_limit_ma >= 300) && (usbin_i_limit_ma <= 3000)) |
| { |
| err_flag |= pm_smbchg_usb_chgpth_set_usbin_current_limit(device_index, usbin_i_limit_ma); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| |
| //DCIN Input Current Limit : valid range is 300 to 2000 mAmp |
| if (chg_param_ptr->dcin_input_current_limit.enable_config == PM_ENABLE_CONFIG) |
| { |
| uint32 dcin_i_limit_ma = chg_param_ptr->dcin_input_current_limit.dcin_input_current_limit; |
| if ((dcin_i_limit_ma >= 300) && (dcin_i_limit_ma <= 3200)) |
| { |
| err_flag |= pm_smbchg_dc_chgpth_set_dcin_current_limit(device_index, dcin_i_limit_ma); |
| } |
| else |
| { |
| err_flag |= PM_ERR_FLAG__INVALID_PARAMETER; |
| } |
| } |
| |
| |
| return err_flag; |
| } |
| #endif |
| |
| bool pm_appsbl_charging_in_progress() |
| { |
| return charge_in_progress; |
| } |
| |
| bool pm_appsbl_display_init_done() |
| { |
| return display_initialized; |
| } |
| |
| pm_err_flag_type pm_appsbl_set_dcin_suspend(uint32_t device_index) |
| { |
| pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS; |
| |
| err_flag = pm_smbchg_usb_chgpth_set_cmd_il(device_index, PM_SMBCHG_USBCHGPTH_CMD_IL__DCIN_SUSPEND, TRUE); |
| |
| return err_flag; |
| } |
| |
| static bool is_power_key_pressed() |
| { |
| int count = 0; |
| |
| if (pm8x41_get_pwrkey_is_pressed()) |
| { |
| while(count++ < 10 && pm8x41_get_pwrkey_is_pressed()) |
| thread_sleep(100); |
| |
| dprintf(INFO, "Power Key Pressed\n"); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool pm_app_display_shutdown_in_prgs() |
| { |
| return display_shutdown_in_prgs; |
| } |
| |
| static int display_charger_screen() |
| { |
| static bool display_init_first_time; |
| |
| /* By default first time display the charger screen |
| * Wait for 5 seconds and turn off the display |
| * If user presses power key & charging is in progress display the charger screen |
| */ |
| do { |
| if (!display_init_first_time || (is_power_key_pressed() && charge_in_progress)) |
| { |
| /* Display charger screen */ |
| target_display_init(panel_name); |
| /* wait for 5 seconds to show the charger screen */ |
| display_initialized = true; |
| thread_sleep(PM_CHARGE_DISPLAY_TIMEOUT); |
| /* Shutdown the display: If the charging is complete |
| * continue boot up with display on |
| */ |
| if (charge_in_progress) |
| { |
| display_shutdown_in_prgs = true; |
| target_display_shutdown(); |
| display_shutdown_in_prgs = false; |
| display_initialized = false; |
| } |
| display_init_first_time = true; |
| } |
| /* Wait for 100ms before reading the pmic interrupt status |
| * again, reading the pmic interrupt status in a loop without delays |
| * reports false key presses */ |
| thread_sleep(100); |
| } while (charge_in_progress); |
| |
| return 0; |
| } |
| |
| /* Create a thread to monitor power key press events |
| * and turn on/off the display for battery |
| */ |
| static void display_thread_initialize() |
| { |
| thread_t *thr = NULL; |
| static bool is_thread_start; |
| |
| if (!is_thread_start) |
| { |
| thr = thread_create("display_charger_screen", &display_charger_screen, NULL, DEFAULT_PRIORITY, DEFAULT_STACK_SIZE); |
| if (!thr) |
| { |
| dprintf(CRITICAL, "Error: Could not create display charger screen thread\n"); |
| return; |
| } |
| thread_resume(thr); |
| |
| is_thread_start = true; |
| } |
| } |
| |
| static void pm_app_wait_for_iacs_ready(uint32_t sid) |
| { |
| uint8_t iacs; |
| int max_retry = 100; |
| |
| udelay(50); |
| pm_comm_read_byte(sid, 0x4454, &iacs, 0); |
| while ((iacs & 0x02) == 0) |
| { |
| max_retry--; |
| pm_comm_read_byte(2, 0x4454, &iacs, 0); |
| mdelay(5); |
| if (!max_retry) |
| { |
| dprintf(CRITICAL, "Error: IACS not ready, shutting down\n"); |
| shutdown_device(); |
| } |
| } |
| } |
| |
| static int pm_app_check_for_ima_exception(uint32_t sid) |
| { |
| uint8_t ima_err_sts; |
| uint8_t ima_exception_sts; |
| |
| pm_comm_read_byte(sid, 0x445f, &ima_err_sts, 0); |
| pm_comm_read_byte(sid, 0x4455, &ima_exception_sts, 0); |
| |
| if (ima_err_sts != 0 || (ima_exception_sts & 0x1) == 1) |
| { |
| uint8_t ima_hw_sts; |
| pm_comm_read_byte(sid, 0x4456, &ima_hw_sts, 0); |
| dprintf(CRITICAL, "ima_err_sts: %x\tima_exception_sts:%x\tima_hw_sts:%x\n", ima_err_sts, ima_exception_sts, ima_hw_sts); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void pm_app_ima_read_voltage(uint32_t *voltage) |
| { |
| uint8_t start_beat_count; |
| uint8_t end_beat_count; |
| uint8_t vbat; |
| uint64_t vbat_adc = 0; |
| uint32_t sid = 2; //sid for pmi8996 |
| int max_retry = 5; |
| |
| retry: |
| //Request IMA access |
| pm_comm_write_byte(sid, 0x4450, 0xA0, 0); |
| // Single read configure |
| pm_comm_write_byte(sid, 0x4451, 0x00, 0); |
| |
| pm_app_wait_for_iacs_ready(sid); |
| |
| //configure SRAM access |
| pm_comm_write_byte(sid, 0x4461, 0xCC, 0); |
| pm_comm_write_byte(sid, 0x4462, 0x05, 0); |
| |
| pm_app_wait_for_iacs_ready(sid); |
| |
| pm_comm_read_byte(sid, 0x4457, &start_beat_count, 0); |
| |
| //Read the voltage |
| pm_comm_read_byte(sid, 0x4467, &vbat, 0); |
| vbat_adc = vbat; |
| pm_comm_read_byte(sid, 0x4468, &vbat, 0); |
| vbat_adc |= (vbat << 8); |
| pm_comm_read_byte(sid, 0x4469, &vbat, 0); |
| vbat_adc |= (vbat << 16); |
| pm_comm_read_byte(sid, 0x446A, &vbat, 0); |
| vbat_adc |= (vbat << 24); |
| |
| pm_app_wait_for_iacs_ready(sid); |
| |
| //Look for any errors |
| if(pm_app_check_for_ima_exception(sid)) |
| goto err; |
| |
| pm_comm_read_byte(sid, 0x4457, &end_beat_count, 0); |
| |
| if (start_beat_count != end_beat_count) |
| { |
| max_retry--; |
| if (!max_retry) |
| goto err; |
| goto retry; |
| } |
| |
| //Release the ima access |
| pm_comm_write_byte(2, 0x4450, 0x00, 0); |
| |
| //extract the byte1 & byte2 and convert to mv |
| vbat_adc = ((vbat_adc & 0x00ffff00) >> 8) * 152587; |
| *voltage = vbat_adc / 1000000; |
| return; |
| |
| err: |
| dprintf(CRITICAL, "Failed to Read the Voltage from IMA, shutting down\n"); |
| shutdown_device(); |
| } |
| |
| static void pm_app_pmi8994_read_voltage(uint32_t *voltage) |
| { |
| uint8_t val = 0; |
| uint8_t vbat; |
| uint64_t vbat_adc = 0; |
| uint32_t sid = 2; //sid for pmi8994 |
| int max_retry = 100; |
| |
| pm_comm_read_byte(sid, 0x4440, &val, 0); |
| |
| //Request for FG access |
| if ((val & BIT(7)) != 1) |
| pm_comm_write_byte(sid, 0x4440, 0x80, 0); |
| |
| pm_comm_read_byte(sid, 0x4410, &val, 0); |
| while((val & 0x1) == 0) |
| { |
| //sleep and retry again, this takes up to 1.5 seconds |
| max_retry--; |
| mdelay(100); |
| pm_comm_read_byte(sid, 0x4410, &val, 0); |
| if (!max_retry) |
| { |
| dprintf(CRITICAL, "Error: Failed to read from Fuel Guage, Shutting down\n"); |
| shutdown_device(); |
| } |
| } |
| |
| //configure single read access |
| pm_comm_write_byte(sid, 0x4441, 0x00, 0); |
| //configure SRAM for voltage shadow |
| pm_comm_write_byte(sid, 0x4442, 0xCC, 0); |
| pm_comm_write_byte(sid, 0x4443, 0x05, 0); |
| |
| //Read voltage from SRAM |
| pm_comm_read_byte(sid, 0x444c, &vbat, 0); |
| vbat_adc = vbat; |
| pm_comm_read_byte(sid, 0x444d, &vbat, 0); |
| vbat_adc |= (vbat << 8); |
| pm_comm_read_byte(sid, 0x444e, &vbat, 0); |
| vbat_adc |= (vbat << 16); |
| pm_comm_read_byte(sid, 0x444f, &vbat, 0); |
| vbat_adc |= (vbat << 24); |
| |
| //clean up to relase sram access |
| pm_comm_write_byte(sid, 0x4440, 0x00, 0); |
| //extract byte 1 & byte 2 |
| vbat_adc = ((vbat_adc & 0x00ffff00) >> 8) * 152587; |
| |
| //convert the voltage to mv |
| *voltage = vbat_adc / 1000000; |
| } |
| |