| /* Copyright (c) 2013-2015 The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <debug.h> |
| #include <stdlib.h> |
| #include <endian.h> |
| #include <string.h> |
| #include <utp.h> |
| #include <rpmb.h> |
| |
| int ucs_do_scsi_cmd(struct ufs_dev *dev, struct scsi_req_build_type *req) |
| { |
| struct upiu_req_build_type req_upiu; |
| struct upiu_basic_resp_hdr resp_upiu; |
| |
| memset(&req_upiu, 0 , sizeof(struct upiu_req_build_type)); |
| |
| req_upiu.cmd_set_type = UPIU_SCSI_CMD_SET; |
| req_upiu.trans_type = UPIU_TYPE_COMMAND; |
| req_upiu.data_buffer_addr = req->data_buffer_addr; |
| req_upiu.expected_data_len = req->data_len; |
| req_upiu.data_seg_len = 0; |
| req_upiu.ehs_len = 0; |
| req_upiu.flags = req->flags; |
| req_upiu.lun = req->lun; |
| req_upiu.query_mgmt_func = 0; |
| req_upiu.cdb = req->cdb; |
| req_upiu.cmd_type = UTRD_SCSCI_CMD; |
| req_upiu.dd = req->dd; |
| req_upiu.resp_ptr = &resp_upiu; |
| req_upiu.resp_len = sizeof(resp_upiu); |
| req_upiu.timeout_msecs = UTP_GENERIC_CMD_TIMEOUT; |
| |
| if (utp_enqueue_upiu(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "ucs_do_scsi_cmd: enqueue failed\n"); |
| return -UFS_FAILURE; |
| } |
| |
| if (resp_upiu.status != SCSI_STATUS_GOOD) |
| { |
| if (resp_upiu.status == SCSI_STATUS_CHK_COND && (*((uint8_t *)(req->cdb)) != SCSI_CMD_SENSE_REQ)) |
| { |
| dprintf(CRITICAL, "Data segment length: %x\n", BE16(resp_upiu.data_seg_len)); |
| if (BE16(resp_upiu.data_seg_len)) |
| { |
| dprintf(CRITICAL, "SCSI Request failed and we have sense data\n"); |
| dprintf(CRITICAL, "Sense Data Length/Response Code: 0x%x/0x%x\n", BE16(resp_upiu.sense_length), BE16(resp_upiu.sense_response_code)); |
| parse_sense_key(resp_upiu.sense_data[0]); |
| dprintf(CRITICAL, "Sense Buffer (HEX): 0x%x 0x%x 0x%x 0x%x\n", BE32(resp_upiu.sense_data[0]), BE32(resp_upiu.sense_data[1]), BE32(resp_upiu.sense_data[2]), BE32(resp_upiu.sense_data[3])); |
| } |
| } |
| |
| dprintf(CRITICAL, "ucs_do_scsi_cmd failed status = %x\n", resp_upiu.status); |
| return -UFS_FAILURE; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| int parse_sense_key(uint32_t sense_data) |
| { |
| uint32_t key = BE32(sense_data) >> 24; |
| dprintf(CRITICAL, "Sense Key: 0x%x\n", key); |
| switch(key) |
| { |
| case 0x0: |
| dprintf(INFO, "NO SENSE: No information available to be reported\n"); |
| break; |
| case 0x1: |
| dprintf(INFO, "RECOVERED ERROR: Additional sense buffer bytes indicate further details\n"); |
| break; |
| case 0x2: |
| dprintf(INFO, "NOT READY: Logical Unit Not Ready and cannot be accessed at this time\n"); |
| break; |
| case 0x3: |
| dprintf(INFO, "MEDIUM ERROR: Last command unsuccessful due to non-recoverable error condition\n"); |
| break; |
| case 0x4: |
| dprintf(INFO, "HARDWARE ERROR: Target detected a non-recoverable hardware error\n"); |
| break; |
| case 0x5: |
| dprintf(INFO, "ILLEGAL REQUEST: Illegal parameter in the command descriptor block in the command sent\n"); |
| break; |
| case 0x6: |
| dprintf(INFO, "UNIT ATTENTION: Unit has been reset/unexpectedly power on/removable media has changed\n"); |
| break; |
| case 0x7: |
| dprintf(INFO, "DATA PROTECT: Read/Write operation attempted on a block that is protected from this operation\n"); |
| break; |
| case 0x8: |
| dprintf(INFO, "BLANK CHECK: Target encountered blank or unformatted media while reading or writing\n"); |
| break; |
| case 0x9: |
| dprintf(INFO, "VENDOR SPECIFIC: Vendor specific error or exceptional conditions\n"); |
| break; |
| case 0xB: |
| dprintf(INFO, "ABORTED COMMAND: Target aborted the execution of the command\n"); |
| break; |
| case 0xD: |
| dprintf(INFO, "VOLUME OVERFLOW: Buffered peripheral device has reached the end of partition\n"); |
| break; |
| case 0xE: |
| dprintf(INFO, "MISCOMPARE: Source data did not match the data read from the media\n"); |
| break; |
| default: |
| dprintf(INFO, "INVALID sense key\n"); |
| } |
| return key; |
| } |
| |
| int ucs_do_scsi_rpmb_read(struct ufs_dev *dev, uint32_t *req_buf, uint32_t blk_cnt, |
| uint32_t *resp_buf, uint32_t *resp_len) |
| { |
| // validate input parameters |
| ASSERT(req_buf); |
| ASSERT(resp_buf); |
| ASSERT(resp_len); |
| |
| STACKBUF_DMA_ALIGN(cdb, sizeof(struct scsi_sec_protocol_cdb)); |
| struct scsi_req_build_type req_upiu; |
| struct scsi_sec_protocol_cdb *cdb_out_param, *cdb_in_param; |
| uint32_t blks_remaining; |
| uint32_t blks_to_transfer; |
| uint64_t bytes_to_transfer; |
| uint64_t max_size; |
| blks_remaining = blk_cnt; |
| blks_to_transfer = blks_remaining; |
| bytes_to_transfer = blks_to_transfer * RPMB_FRAME_SIZE; |
| |
| // check if total bytes to transfer exceed max supported size |
| max_size = dev->rpmb_rw_size * RPMB_FRAME_SIZE * blk_cnt; |
| if (bytes_to_transfer > max_size) |
| { |
| dprintf(CRITICAL, "RPMB request transfer size %llu greater than max transfer size %llu\n", bytes_to_transfer, max_size); |
| return -UFS_FAILURE; |
| } |
| #ifdef DEBUG_UFS |
| dprintf(INFO, "rpmb_read: req_buf: 0x%x blk_count: 0x%x\n", *req_buf, blk_cnt); |
| dprintf(INFO, "rpmb_read: bytes_to_transfer: 0x%x blks_to_transfer: 0x%x\n", |
| bytes_to_transfer, blks_to_transfer); |
| #endif |
| // send the request |
| cdb_out_param = (struct scsi_sec_protocol_cdb*) cdb; |
| memset(cdb_out_param, 0, sizeof(struct scsi_sec_protocol_cdb)); |
| |
| cdb_out_param->opcode = SCSI_CMD_SECPROT_OUT; |
| cdb_out_param->cdb1 = SCSI_SEC_PROT; |
| cdb_out_param->sec_protocol_specific = BE16(SCSI_SEC_UFS_PROT_ID); |
| cdb_out_param->alloc_tlen = BE32(bytes_to_transfer); |
| |
| // Flush CDB to memory |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_out_param, sizeof(struct scsi_sec_protocol_cdb)); |
| |
| memset(&req_upiu, 0, sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_out_param; |
| req_upiu.data_buffer_addr = (addr_t) req_buf; |
| req_upiu.data_len = bytes_to_transfer; |
| req_upiu.flags = UPIU_FLAGS_WRITE; |
| req_upiu.lun = UFS_WLUN_RPMB; |
| req_upiu.dd = UTRD_TARGET_TO_SYSTEM; |
| |
| #ifdef DEBUG_UFS |
| dprintf(INFO, "Sending RPMB Read request\n"); |
| #endif |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "%s:%d ucs_do_scsi_rpmb_read: failed\n", __func__, __LINE__); |
| return -UFS_FAILURE; |
| } |
| #ifdef DEBUG_UFS |
| dprintf(INFO, "Sending RPMB Read request complete\n"); |
| #endif |
| // read the response |
| cdb_in_param = (struct scsi_sec_protocol_cdb*) cdb; |
| memset(cdb_in_param, 0, sizeof(struct scsi_sec_protocol_cdb)); |
| |
| cdb_in_param->opcode = SCSI_CMD_SECPROT_IN; |
| cdb_in_param->cdb1 = SCSI_SEC_PROT; |
| cdb_in_param->sec_protocol_specific = BE16(SCSI_SEC_UFS_PROT_ID); |
| cdb_in_param->alloc_tlen = BE32(bytes_to_transfer); |
| |
| // Flush CDB to memory |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_in_param, sizeof(struct scsi_sec_protocol_cdb)); |
| |
| memset(&req_upiu, 0, sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_in_param; |
| req_upiu.data_buffer_addr = (addr_t) resp_buf; |
| req_upiu.data_len = bytes_to_transfer; |
| req_upiu.flags = UPIU_FLAGS_READ; |
| req_upiu.lun = UFS_WLUN_RPMB; |
| req_upiu.dd = UTRD_SYSTEM_TO_TARGET; |
| |
| #ifdef DEBUG_UFS |
| dprintf(INFO, "Sending RPMB Read response\n"); |
| #endif |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "%s:%d ucs_do_scsi_rpmb_read: failed\n", __func__, __LINE__); |
| return -UFS_FAILURE; |
| } |
| #ifdef DEBUG_UFS |
| dprintf(SPEW, "Sending RPMB Read response complete\n"); |
| #endif |
| *resp_len = bytes_to_transfer; |
| return UFS_SUCCESS; |
| } |
| |
| int ucs_do_scsi_read(struct ufs_dev *dev, struct scsi_rdwr_req *req) |
| { |
| STACKBUF_DMA_ALIGN(cdb, sizeof(struct scsi_rdwr_cdb)); |
| struct scsi_req_build_type req_upiu; |
| struct scsi_rdwr_cdb *cdb_param; |
| uint32_t blks_remaining; |
| uint16_t blks_to_transfer; |
| uint64_t bytes_to_transfer; |
| uint32_t start_blk; |
| uint32_t buf; |
| |
| blks_remaining = req->num_blocks; |
| buf = req->data_buffer_base; |
| start_blk = req->start_lba; |
| |
| cdb_param = (struct scsi_rdwr_cdb*) cdb; |
| while (blks_remaining) |
| { |
| if (blks_remaining <= SCSI_MAX_DATA_TRANS_BLK_LEN) |
| { |
| blks_to_transfer = blks_remaining; |
| blks_remaining = 0; |
| } |
| else |
| { |
| blks_to_transfer = SCSI_MAX_DATA_TRANS_BLK_LEN; |
| blks_remaining -= SCSI_MAX_DATA_TRANS_BLK_LEN; |
| } |
| |
| bytes_to_transfer = blks_to_transfer * UFS_DEFAULT_SECTORE_SIZE; |
| |
| memset(cdb_param, 0, sizeof(struct scsi_rdwr_cdb)); |
| cdb_param->opcode = SCSI_CMD_READ10; |
| cdb_param->cdb1 = SCSI_READ_WRITE_10_CDB1(0, 0, 1, 0); |
| cdb_param->lba = BE32(start_blk); |
| cdb_param->trans_len = BE16(blks_to_transfer); |
| |
| |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_param, sizeof(struct scsi_rdwr_cdb)); |
| |
| memset(&req_upiu, 0 , sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_param; |
| req_upiu.data_buffer_addr = buf; |
| req_upiu.data_len = bytes_to_transfer; |
| req_upiu.flags = UPIU_FLAGS_READ; |
| req_upiu.lun = req->lun; |
| req_upiu.dd = UTRD_TARGET_TO_SYSTEM; |
| |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "ucs_do_scsi_read: failed\n"); |
| return -UFS_FAILURE; |
| } |
| |
| buf += bytes_to_transfer; |
| start_blk += SCSI_MAX_DATA_TRANS_BLK_LEN; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| int ucs_do_scsi_write(struct ufs_dev *dev, struct scsi_rdwr_req *req) |
| { |
| struct scsi_req_build_type req_upiu; |
| STACKBUF_DMA_ALIGN(cdb, sizeof(struct scsi_rdwr_cdb)); |
| struct scsi_rdwr_cdb *cdb_param; |
| uint32_t blks_remaining; |
| uint16_t blks_to_transfer; |
| uint64_t bytes_to_transfer; |
| uint32_t start_blk; |
| uint32_t buf; |
| |
| blks_remaining = req->num_blocks; |
| buf = req->data_buffer_base; |
| start_blk = req->start_lba; |
| |
| cdb_param = (struct scsi_rdwr_cdb*) cdb; |
| while (blks_remaining) |
| { |
| if (blks_remaining <= SCSI_MAX_DATA_TRANS_BLK_LEN) |
| { |
| blks_to_transfer = blks_remaining; |
| blks_remaining = 0; |
| } |
| else |
| { |
| blks_to_transfer = SCSI_MAX_DATA_TRANS_BLK_LEN; |
| blks_remaining -= SCSI_MAX_DATA_TRANS_BLK_LEN; |
| } |
| |
| bytes_to_transfer = blks_to_transfer * UFS_DEFAULT_SECTORE_SIZE; |
| |
| memset(cdb_param, 0, sizeof(struct scsi_rdwr_cdb)); |
| cdb_param->opcode = SCSI_CMD_WRITE10; |
| cdb_param->cdb1 = SCSI_READ_WRITE_10_CDB1(0, 0, 1, 0); |
| cdb_param->lba = BE32(start_blk); |
| cdb_param->trans_len = BE16(blks_to_transfer); |
| |
| /* Flush cdb to memory. */ |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_param, sizeof(struct scsi_rdwr_cdb)); |
| |
| memset(&req_upiu, 0 , sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_param; |
| req_upiu.data_buffer_addr = buf; |
| req_upiu.data_len = bytes_to_transfer; |
| req_upiu.flags = UPIU_FLAGS_WRITE; |
| req_upiu.lun = req->lun; |
| req_upiu.dd = UTRD_SYSTEM_TO_TARGET; |
| |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "ucs_do_scsi_write: failed\n"); |
| return -UFS_FAILURE; |
| } |
| |
| buf += bytes_to_transfer; |
| start_blk += SCSI_MAX_DATA_TRANS_BLK_LEN; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| int ucs_do_scsi_unmap(struct ufs_dev *dev, struct scsi_unmap_req *req) |
| { |
| STACKBUF_DMA_ALIGN(cdb_param, SCSI_CDB_PARAM_LEN); |
| STACKBUF_DMA_ALIGN(param, sizeof(struct unmap_param_list)); |
| struct scsi_req_build_type req_upiu; |
| struct unmap_param_list *param_list; |
| struct unmap_blk_desc *blk_desc; |
| |
| param_list = (struct unmap_param_list *)param; |
| |
| // data length = size of unmap block descriptor struct (n-1) - size of data length field. |
| param_list->data_len = ((sizeof(struct unmap_param_list) - 1) - 1) << 0x8; |
| |
| param_list->blk_desc_data_len = sizeof(struct unmap_blk_desc) << 0x8; |
| |
| |
| blk_desc = &(param_list->blk_desc); |
| |
| blk_desc->lba = BE64(req->start_lba); |
| blk_desc->num_blks = BE32(req->num_blocks); |
| |
| memset((void*)cdb_param, 0, SCSI_CDB_PARAM_LEN); |
| cdb_param[0] = SCSI_CMD_UNMAP; |
| cdb_param[1] = 0; /*ANCHOR = 0 for UFS*/ |
| cdb_param[6] = 0; /*Group No = 0*/ |
| cdb_param[7] = 0; /* Param list length is 1, we erase 1 contiguous blk*/ |
| cdb_param[8] = sizeof(struct unmap_param_list); |
| cdb_param[9] = 0; |
| |
| /* Flush cdb to memory. */ |
| dsb(); |
| arch_invalidate_cache_range((addr_t) cdb_param, SCSI_CDB_PARAM_LEN); |
| arch_invalidate_cache_range((addr_t) param, sizeof(struct unmap_param_list)); |
| |
| memset((void*)&req_upiu, 0 , sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_param; |
| req_upiu.data_buffer_addr = (addr_t) param; |
| req_upiu.data_len = sizeof(struct unmap_param_list); |
| req_upiu.flags = UPIU_FLAGS_WRITE; |
| req_upiu.lun = req->lun; |
| req_upiu.dd = UTRD_SYSTEM_TO_TARGET; |
| |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "Failed to send SCSI unmap command \n"); |
| return -UFS_FAILURE; |
| } |
| |
| /* Flush buffer. */ |
| arch_invalidate_cache_range((addr_t) param, SCSI_INQUIRY_LEN); |
| |
| return UFS_SUCCESS; |
| } |
| |
| int ucs_scsi_send_inquiry(struct ufs_dev *dev) |
| { |
| STACKBUF_DMA_ALIGN(cdb_param, SCSI_CDB_PARAM_LEN); |
| STACKBUF_DMA_ALIGN(param, SCSI_INQUIRY_LEN); |
| struct scsi_req_build_type req_upiu; |
| |
| memset(cdb_param, 0, SCSI_CDB_PARAM_LEN); |
| cdb_param[0] = SCSI_CMD_INQUIRY; |
| cdb_param[3] = sizeof(param)>> 8; |
| cdb_param[4] = sizeof(param); |
| |
| /* Flush cdb to memory. */ |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_param, SCSI_CDB_PARAM_LEN); |
| |
| memset(&req_upiu, 0 , sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_param; |
| req_upiu.data_buffer_addr = (addr_t) param; |
| req_upiu.data_len = SCSI_INQUIRY_LEN; |
| req_upiu.flags = UPIU_FLAGS_READ; |
| req_upiu.lun = 0; |
| req_upiu.dd = UTRD_TARGET_TO_SYSTEM; |
| |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "Failed to send SCSI inquiry\n"); |
| return -UFS_FAILURE; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| void dump_sense_buffer(uint8_t *buf, int buf_len) |
| { |
| int index=0; |
| |
| dprintf(CRITICAL,"----Sense buffer----\n"); |
| for(index=0; index < buf_len; index++) |
| dprintf(CRITICAL,"buf[%d] = %x\n",index, buf[index]); |
| |
| dprintf(CRITICAL,"----end of buffer---\n"); |
| } |
| |
| int ucs_do_request_sense(struct ufs_dev *dev, uint8_t lun) |
| { |
| STACKBUF_DMA_ALIGN(cdb, sizeof(struct scsi_sense_cdb)); |
| struct scsi_req_build_type req_upiu; |
| struct scsi_sense_cdb *cdb_param; |
| STACKBUF_DMA_ALIGN(buf, SCSI_SENSE_BUF_LEN); |
| |
| cdb_param = (struct scsi_sense_cdb *) cdb; |
| |
| memset(cdb, 0, sizeof(struct scsi_sense_cdb)); |
| |
| cdb_param->opcode = SCSI_CMD_SENSE_REQ; |
| cdb_param->alloc_len = SCSI_SENSE_BUF_LEN; |
| |
| /* Flush cdb to memory. */ |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) cdb_param, SCSI_CDB_PARAM_LEN); |
| |
| memset(&req_upiu, 0 , sizeof(struct scsi_req_build_type)); |
| |
| req_upiu.cdb = (addr_t) cdb_param; |
| req_upiu.data_buffer_addr = (addr_t) buf; |
| req_upiu.data_len = SCSI_SENSE_BUF_LEN; |
| req_upiu.flags = UPIU_FLAGS_READ; |
| req_upiu.lun = lun; |
| req_upiu.dd = UTRD_TARGET_TO_SYSTEM; |
| |
| if (ucs_do_scsi_cmd(dev, &req_upiu)) |
| { |
| dprintf(CRITICAL, "ucs_do_request_sense: failed\n"); |
| return -UFS_FAILURE; |
| } |
| |
| /* Flush buffer. */ |
| arch_invalidate_cache_range((addr_t) buf, SCSI_INQUIRY_LEN); |
| |
| #if DEBUG_UFS |
| dump_sense_buffer(buf, SCSI_SENSE_BUF_LEN); |
| #endif |
| |
| return UFS_SUCCESS; |
| } |