| /* |
| * Copyright (c) 2008, Google Inc. |
| * All rights reserved. |
| * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <debug.h> |
| #include <reg.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <dev/flash.h> |
| #include <lib/ptable.h> |
| #include <nand.h> |
| |
| #include "dmov.h" |
| |
| #define VERBOSE 0 |
| #define VERIFY_WRITE 0 |
| |
| static void *flash_spare; |
| static void *flash_data; |
| void platform_config_interleaved_mode_gpios(void); |
| |
| typedef struct dmov_ch dmov_ch; |
| struct dmov_ch |
| { |
| volatile unsigned cmd; |
| volatile unsigned result; |
| volatile unsigned status; |
| volatile unsigned config; |
| }; |
| |
| static void dmov_prep_ch(dmov_ch *ch, unsigned id) |
| { |
| ch->cmd = DMOV_CMD_PTR(id); |
| ch->result = DMOV_RSLT(id); |
| ch->status = DMOV_STATUS(id); |
| ch->config = DMOV_CONFIG(id); |
| } |
| |
| #define SRC_CRCI_NAND_CMD CMD_SRC_CRCI(DMOV_NAND_CRCI_CMD) |
| #define DST_CRCI_NAND_CMD CMD_DST_CRCI(DMOV_NAND_CRCI_CMD) |
| #define SRC_CRCI_NAND_DATA CMD_SRC_CRCI(DMOV_NAND_CRCI_DATA) |
| #define DST_CRCI_NAND_DATA CMD_DST_CRCI(DMOV_NAND_CRCI_DATA) |
| |
| #define NAND_CFG0_RAW 0xA80420C0 |
| #define NAND_CFG1_RAW 0x5045D |
| |
| static unsigned CFG0, CFG1; |
| static unsigned CFG0_M, CFG1_M; |
| static unsigned CFG0_A, CFG1_A; |
| |
| #define CFG1_WIDE_FLASH (1U << 1) |
| |
| #define paddr(n) ((unsigned) (n)) |
| |
| static int dmov_exec_cmdptr(unsigned id, unsigned *ptr) |
| { |
| dmov_ch ch; |
| unsigned n; |
| |
| dmov_prep_ch(&ch, id); |
| |
| writel(DMOV_CMD_PTR_LIST | DMOV_CMD_ADDR(paddr(ptr)), ch.cmd); |
| |
| while(!(readl(ch.status) & DMOV_STATUS_RSLT_VALID)) ; |
| |
| n = readl(ch.status); |
| while(DMOV_STATUS_RSLT_COUNT(n)) { |
| n = readl(ch.result); |
| if(n != 0x80000002) { |
| dprintf(CRITICAL, "ERROR: result: %x\n", n); |
| dprintf(CRITICAL, "ERROR: flush: %x %x %x %x\n", |
| readl(DMOV_FLUSH0(DMOV_NAND_CHAN)), |
| readl(DMOV_FLUSH1(DMOV_NAND_CHAN)), |
| readl(DMOV_FLUSH2(DMOV_NAND_CHAN)), |
| readl(DMOV_FLUSH3(DMOV_NAND_CHAN))); |
| } |
| n = readl(ch.status); |
| } |
| |
| return 0; |
| } |
| |
| static struct flash_info flash_info; |
| static unsigned flash_pagesize = 0; |
| static int interleaved_mode = 0; |
| |
| struct flash_identification { |
| unsigned flash_id; |
| unsigned mask; |
| unsigned density; |
| unsigned widebus; |
| unsigned pagesize; |
| unsigned blksize; |
| unsigned oobsize; |
| unsigned onenand; |
| }; |
| |
| static struct flash_identification supported_flash[] = |
| { |
| /* Flash ID ID Mask Density(MB) Wid Pgsz Blksz oobsz onenand Manuf */ |
| {0x00000000, 0xFFFFFFFF, 0, 0, 0, 0, 0, 0}, /*ONFI*/ |
| {0x1500aaec, 0xFF00FFFF, (256<<20), 0, 2048, (2048<<6), 64, 0}, /*Sams*/ |
| {0x5500baec, 0xFF00FFFF, (256<<20), 1, 2048, (2048<<6), 64, 0}, /*Sams*/ |
| {0x1500aa98, 0xFFFFFFFF, (256<<20), 0, 2048, (2048<<6), 64, 0}, /*Tosh*/ |
| {0x5500ba98, 0xFFFFFFFF, (256<<20), 1, 2048, (2048<<6), 64, 0}, /*Tosh*/ |
| {0xd580b12c, 0xFFFFFFFF, (256<<20), 1, 2048, (2048<<6), 64, 0}, /*Micr*/ |
| {0x5590bc2c, 0xFFFFFFFF, (512<<20), 1, 2048, (2048<<6), 64, 0}, /*Micr*/ |
| {0x1580aa2c, 0xFFFFFFFF, (256<<20), 0, 2048, (2048<<6), 64, 0}, /*Micr*/ |
| {0x1590ac2c, 0xFFFFFFFF, (512<<20), 0, 2048, (2048<<6), 64, 0}, /*Micr*/ |
| {0x5580baad, 0xFFFFFFFF, (256<<20), 1, 2048, (2048<<6), 64, 0}, /*Hynx*/ |
| {0x5510baad, 0xFFFFFFFF, (256<<20), 1, 2048, (2048<<6), 64, 0}, /*Hynx*/ |
| {0x004000ec, 0xFFFFFFFF, (256<<20), 0, 2048, (2048<<6), 64, 1}, /*Sams*/ |
| {0x005c00ec, 0xFFFFFFFF, (256<<20), 0, 2048, (2048<<6), 64, 1}, /*Sams*/ |
| {0x005800ec, 0xFFFFFFFF, (256<<20), 0, 2048, (2048<<6), 64, 1}, /*Sams*/ |
| {0x6600bcec, 0xFF00FFFF, (512<<20), 1, 4096, (4096<<6), 128, 0}, /*Sams*/ |
| /* Note: Width flag is 0 for 8 bit Flash and 1 for 16 bit flash */ |
| /* Note: Onenand flag is 0 for NAND Flash and 1 for OneNAND flash */ |
| /* Note: The First row will be filled at runtime during ONFI probe */ |
| }; |
| static void set_nand_configuration(char type) |
| { |
| if(type == TYPE_MODEM_PARTITION) |
| { |
| CFG0 = CFG0_M; |
| CFG1 = CFG1_M; |
| } |
| else |
| { |
| CFG0 = CFG0_A; |
| CFG1 = CFG1_A; |
| } |
| } |
| |
| static void flash_nand_read_id(dmov_s *cmdlist, unsigned *ptrlist) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| |
| data[0] = 0 | 4; |
| data[1] = NAND_CMD_FETCH_ID; |
| data[2] = 1; |
| data[3] = 0; |
| data[4] = 0; |
| data[5] = 0; |
| data[6] = 0; |
| data[7] = 0xAAD40000; /* Default value for CFG0 for reading device id */ |
| |
| /* Read NAND device id */ |
| cmd[0].cmd = 0 | CMD_OCB; |
| cmd[0].src = paddr(&data[7]); |
| cmd[0].dst = NAND_DEV0_CFG0; |
| cmd[0].len = 4; |
| |
| cmd[1].cmd = 0; |
| cmd[1].src = NAND_SFLASHC_BURST_CFG; |
| cmd[1].dst = paddr(&data[5]); |
| cmd[1].len = 4; |
| |
| cmd[2].cmd = 0; |
| cmd[2].src = paddr(&data[6]); |
| cmd[2].dst = NAND_SFLASHC_BURST_CFG; |
| cmd[2].len = 4; |
| |
| cmd[3].cmd = 0; |
| cmd[3].src = paddr(&data[0]); |
| cmd[3].dst = NAND_FLASH_CHIP_SELECT; |
| cmd[3].len = 4; |
| |
| cmd[4].cmd = DST_CRCI_NAND_CMD; |
| cmd[4].src = paddr(&data[1]); |
| cmd[4].dst = NAND_FLASH_CMD; |
| cmd[4].len = 4; |
| |
| cmd[5].cmd = 0; |
| cmd[5].src = paddr(&data[2]); |
| cmd[5].dst = NAND_EXEC_CMD; |
| cmd[5].len = 4; |
| |
| cmd[6].cmd = SRC_CRCI_NAND_DATA; |
| cmd[6].src = NAND_FLASH_STATUS; |
| cmd[6].dst = paddr(&data[3]); |
| cmd[6].len = 4; |
| |
| cmd[7].cmd = 0; |
| cmd[7].src = NAND_READ_ID; |
| cmd[7].dst = paddr(&data[4]); |
| cmd[7].len = 4; |
| |
| cmd[8].cmd = CMD_OCU | CMD_LC; |
| cmd[8].src = paddr(&data[5]); |
| cmd[8].dst = NAND_SFLASHC_BURST_CFG; |
| cmd[8].len = 4; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "status: %x\n", data[3]); |
| #endif |
| |
| flash_info.id = data[4]; |
| flash_info.vendor = data[4] & 0xff; |
| flash_info.device = (data[4] >> 8) & 0xff; |
| return; |
| } |
| |
| static int flash_nand_block_isbad(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| char buf[4]; |
| unsigned cwperpage; |
| |
| cwperpage = (flash_pagesize >> 9); |
| |
| /* Check first page of this block */ |
| if(page & 63) |
| page = page - (page & 63); |
| |
| /* Check bad block marker */ |
| data[0] = NAND_CMD_PAGE_READ; /* command */ |
| |
| /* addr0 */ |
| if (CFG1 & CFG1_WIDE_FLASH) |
| data[1] = (page << 16) | ((528*(cwperpage-1)) >> 1); |
| else |
| data[1] = (page << 16) | (528*(cwperpage-1)); |
| |
| data[2] = (page >> 16) & 0xff; /* addr1 */ |
| data[3] = 0 | 4; /* chipsel */ |
| data[4] = NAND_CFG0_RAW & ~(7U << 6); /* cfg0 */ |
| data[5] = NAND_CFG1_RAW | (CFG1 & CFG1_WIDE_FLASH); /* cfg1 */ |
| data[6] = 1; |
| data[7] = CLEAN_DATA_32; /* flash status */ |
| data[8] = CLEAN_DATA_32; /* buf status */ |
| |
| cmd[0].cmd = DST_CRCI_NAND_CMD | CMD_OCB; |
| cmd[0].src = paddr(&data[0]); |
| cmd[0].dst = NAND_FLASH_CMD; |
| cmd[0].len = 16; |
| |
| cmd[1].cmd = 0; |
| cmd[1].src = paddr(&data[4]); |
| cmd[1].dst = NAND_DEV0_CFG0; |
| cmd[1].len = 8; |
| |
| cmd[2].cmd = 0; |
| cmd[2].src = paddr(&data[6]); |
| cmd[2].dst = NAND_EXEC_CMD; |
| cmd[2].len = 4; |
| |
| cmd[3].cmd = SRC_CRCI_NAND_DATA; |
| cmd[3].src = NAND_FLASH_STATUS; |
| cmd[3].dst = paddr(&data[7]); |
| cmd[3].len = 8; |
| |
| cmd[4].cmd = CMD_OCU | CMD_LC; |
| cmd[4].src = NAND_FLASH_BUFFER + (flash_pagesize - (528*(cwperpage-1))); |
| cmd[4].dst = paddr(&buf); |
| cmd[4].len = 4; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "status: %x\n", data[7]); |
| #endif |
| |
| /* we fail if there was an operation error, a mpu error, or the |
| ** erase success bit was not set. |
| */ |
| if(data[7] & 0x110) return -1; |
| |
| /* Check for bad block marker byte */ |
| if (CFG1 & CFG1_WIDE_FLASH) { |
| if (buf[0] != 0xFF || buf[1] != 0xFF) |
| return 1; |
| } else { |
| if (buf[0] != 0xFF) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int flash_nand_block_isbad_interleave(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| char buf01[4]; |
| char buf10[4]; |
| unsigned cwperpage; |
| |
| cwperpage = ((flash_pagesize >> 1)>> 9); |
| |
| /* Check first page of this block */ |
| if(page & 63) |
| page = page - (page & 63); |
| |
| /* Check bad block marker */ |
| data[0] = NAND_CMD_PAGE_READ; /* command */ |
| |
| /* addr0 */ |
| if (CFG1 & CFG1_WIDE_FLASH) |
| data[1] = (page << 16) | ((528*(cwperpage-1)) >> 1); |
| else |
| data[1] = (page << 16) | (528*(cwperpage-1)); |
| |
| data[2] = (page >> 16) & 0xff; /* addr1 */ |
| data[3] = 0 | 4; /* chipsel CS0 */ |
| data[4] = 0 | 5; /* chipsel CS1 */ |
| data[5] = NAND_CFG0_RAW & ~(7U << 6); /* cfg0 */ |
| data[6] = NAND_CFG1_RAW | (CFG1 & CFG1_WIDE_FLASH); /* cfg1 */ |
| data[7] = 1; |
| data[8] = CLEAN_DATA_32; /* NC01 flash status */ |
| data[9] = CLEAN_DATA_32; /* NC01 buf01 status */ |
| data[10] = CLEAN_DATA_32; /* NC10 flash status */ |
| data[11] = CLEAN_DATA_32; /* NC10 buf10 status */ |
| data[12] = 0x00000A3C; /* adm_mux_data_ack_req_nc01 */ |
| data[13] = 0x0000053C; /* adm_mux_cmd_ack_req_nc01 */ |
| data[14] = 0x00000F28; /* adm_mux_data_ack_req_nc10 */ |
| data[15] = 0x00000F14; /* adm_mux_cmd_ack_req_nc10 */ |
| data[16] = 0x00000FC0; /* adm_default_mux */ |
| data[17] = 0x00000805; /* enable CS1 */ |
| data[18] = 0x00000801; /* disable CS1 */ |
| |
| /* enable CS1 */ |
| cmd[0].cmd = 0; |
| cmd[0].src = paddr(data[17]); |
| cmd[0].dst = EBI2_CHIP_SELECT_CFG0; |
| cmd[0].len = 4; |
| |
| /* Reading last code word from NC01 */ |
| /* 0xF14 */ |
| cmd[1].cmd = 0; |
| cmd[1].src = paddr(data[15]); |
| cmd[1].dst = EBI2_NAND_ADM_MUX; |
| cmd[1].len = 4; |
| |
| cmd[2].cmd = DST_CRCI_NAND_CMD; |
| cmd[2].src = paddr(&data[0]); |
| cmd[2].dst = NC01(NAND_FLASH_CMD); |
| cmd[2].len = 16; |
| |
| cmd[3].cmd = 0; |
| cmd[3].src = paddr(&data[5]); |
| cmd[3].dst = NC01(NAND_DEV0_CFG0); |
| cmd[3].len = 8; |
| |
| cmd[4].cmd = 0; |
| cmd[4].src = paddr(&data[7]); |
| cmd[4].dst = NC01(NAND_EXEC_CMD); |
| cmd[4].len = 4; |
| |
| /* 0xF28 */ |
| cmd[5].cmd = 0; |
| cmd[5].src = paddr(data[14]); |
| cmd[5].dst = EBI2_NAND_ADM_MUX; |
| cmd[5].len = 4; |
| |
| cmd[6].cmd = SRC_CRCI_NAND_DATA; |
| cmd[6].src = NC01(NAND_FLASH_STATUS); |
| cmd[6].dst = paddr(&data[8]); |
| cmd[6].len = 8; |
| |
| cmd[7].cmd = 0; |
| cmd[7].src = NC01(NAND_FLASH_BUFFER) + (flash_pagesize - (528*(cwperpage-1))); |
| cmd[7].dst = paddr(&buf01); |
| cmd[7].len = 4; |
| |
| /* Reading last code word from NC10 */ |
| /* 0x53C */ |
| cmd[8].cmd = 0; |
| cmd[8].src = paddr(data[13]); |
| cmd[8].dst = EBI2_NAND_ADM_MUX; |
| cmd[8].len = 4; |
| |
| cmd[9].cmd = DST_CRCI_NAND_CMD; |
| cmd[9].src = paddr(&data[0]); |
| cmd[9].dst = NC10(NAND_FLASH_CMD); |
| cmd[9].len = 12; |
| |
| cmd[10].cmd = 0; |
| cmd[10].src = paddr(&data[4]); |
| cmd[10].dst = NC10(NAND_FLASH_CHIP_SELECT); |
| cmd[10].len = 4; |
| |
| cmd[11].cmd = 0; |
| cmd[11].src = paddr(&data[5]); |
| cmd[11].dst = NC10(NAND_DEV1_CFG0); |
| cmd[11].len = 8; |
| |
| cmd[12].cmd = 0; |
| cmd[12].src = paddr(&data[7]); |
| cmd[12].dst = NC10(NAND_EXEC_CMD); |
| cmd[12].len = 4; |
| |
| /* 0xA3C */ |
| cmd[13].cmd = 0; |
| cmd[13].src = paddr(data[12]); |
| cmd[13].dst = EBI2_NAND_ADM_MUX; |
| cmd[13].len = 4; |
| |
| cmd[14].cmd = SRC_CRCI_NAND_DATA; |
| cmd[14].src = NC10(NAND_FLASH_STATUS); |
| cmd[14].dst = paddr(&data[10]); |
| cmd[14].len = 8; |
| |
| cmd[15].cmd = 0; |
| cmd[15].src = NC10(NAND_FLASH_BUFFER) + (flash_pagesize - (528*(cwperpage-1))); |
| cmd[15].dst = paddr(&buf10); |
| cmd[15].len = 4; |
| |
| cmd[16].cmd = 0; |
| cmd[16].src = paddr(&data[16]); |
| cmd[16].dst = EBI2_NAND_ADM_MUX; |
| cmd[16].len = 4; |
| |
| /* setting default value */ |
| cmd[17].cmd = CMD_OCU | CMD_LC; |
| cmd[17].src = paddr(&data[18]); |
| cmd[17].dst = EBI2_CHIP_SELECT_CFG0; |
| cmd[17].len = 4; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "NC01 status: %x\n", data[8]); |
| dprintf(INFO, "NC10 status: %x\n", data[10]); |
| #endif |
| |
| /* we fail if there was an operation error, a mpu error, or the |
| ** erase success bit was not set. |
| */ |
| if((data[8] & 0x110) || (data[10] & 0x110)) return -1; |
| |
| /* Check for bad block marker byte */ |
| if (CFG1 & CFG1_WIDE_FLASH) { |
| if ((buf01[0] != 0xFF || buf01[1] != 0xFF) || |
| (buf10[0] != 0xFF || buf10[1] != 0xFF)) |
| return 1; |
| } else { |
| if (buf01[0] != 0xFF || buf10[0] != 0xFF) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int flash_nand_erase_block(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| int isbad = 0; |
| |
| /* only allow erasing on block boundaries */ |
| if(page & 63) return -1; |
| |
| /* Check for bad block and erase only if block is not marked bad */ |
| isbad = flash_nand_block_isbad(cmdlist, ptrlist, page); |
| |
| if (isbad) { |
| dprintf(INFO, "skipping @ %d (bad block)\n", page >> 6); |
| return -1; |
| } |
| |
| /* Erase block */ |
| data[0] = NAND_CMD_BLOCK_ERASE; |
| data[1] = page; |
| data[2] = 0; |
| data[3] = 0 | 4; |
| data[4] = 1; |
| data[5] = 0xeeeeeeee; |
| data[6] = CFG0 & (~(7 << 6)); /* CW_PER_PAGE = 0 */ |
| data[7] = CFG1; |
| data[8] = 0x00000020; |
| data[9] = 0x000000C0; |
| |
| cmd[0].cmd = DST_CRCI_NAND_CMD | CMD_OCB; |
| cmd[0].src = paddr(&data[0]); |
| cmd[0].dst = NAND_FLASH_CMD; |
| cmd[0].len = 16; |
| |
| cmd[1].cmd = 0; |
| cmd[1].src = paddr(&data[6]); |
| cmd[1].dst = NAND_DEV0_CFG0; |
| cmd[1].len = 8; |
| |
| cmd[2].cmd = 0; |
| cmd[2].src = paddr(&data[4]); |
| cmd[2].dst = NAND_EXEC_CMD; |
| cmd[2].len = 4; |
| |
| cmd[3].cmd = SRC_CRCI_NAND_DATA; |
| cmd[3].src = NAND_FLASH_STATUS; |
| cmd[3].dst = paddr(&data[5]); |
| cmd[3].len = 4; |
| |
| cmd[4].cmd = 0; |
| cmd[4].src = paddr(&data[8]); |
| cmd[4].dst = NAND_FLASH_STATUS; |
| cmd[4].len = 4; |
| |
| cmd[5].cmd = CMD_OCU | CMD_LC; |
| cmd[5].src = paddr(&data[9]); |
| cmd[5].dst = NAND_READ_STATUS; |
| cmd[5].len = 4; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "status: %x\n", data[5]); |
| #endif |
| |
| /* we fail if there was an operation error, a mpu error, or the |
| ** erase success bit was not set. |
| */ |
| if(data[5] & 0x110) return -1; |
| if(!(data[5] & 0x80)) return -1; |
| |
| return 0; |
| } |
| |
| static int flash_nand_erase_block_interleave(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| int isbad = 0; |
| |
| /* only allow erasing on block boundaries */ |
| if(page & 63) return -1; |
| |
| /* Check for bad block and erase only if block is not marked bad */ |
| isbad = flash_nand_block_isbad(cmdlist, ptrlist, page); |
| |
| if (isbad) { |
| dprintf(INFO, "skipping @ %d (bad block)\n", page >> 6); |
| return -1; |
| } |
| |
| /* Erase block */ |
| data[0] = NAND_CMD_BLOCK_ERASE; |
| data[1] = page; |
| data[2] = 0; |
| data[3] = 0 | 4; /* chipselect CS0 */ |
| data[4] = 0 | 5; /* chipselect CS1 */ |
| data[5] = 1; |
| data[6] = 0xeeeeeeee; |
| data[7] = 0xeeeeeeee; |
| data[8] = CFG0 & (~(7 << 6)); /* CW_PER_PAGE = 0 */ |
| data[9] = CFG1; |
| data[10] = 0x00000A3C; /* adm_mux_data_ack_req_nc01 */ |
| data[11] = 0x0000053C; /* adm_mux_cmd_ack_req_nc01 */ |
| data[12] = 0x00000F28; /* adm_mux_data_ack_req_nc10 */ |
| data[13] = 0x00000F14; /* adm_mux_cmd_ack_req_nc10 */ |
| data[14] = 0x00000FC0; /* adm_default_mux */ |
| data[15] = 0x00000805; /* enable CS1 */ |
| data[16] = 0x00000801; /* disable CS1 */ |
| |
| /* enable CS1 */ |
| cmd[0].cmd = 0 | CMD_OCB; |
| cmd[0].src = paddr(data[15]); |
| cmd[0].dst = EBI2_CHIP_SELECT_CFG0; |
| cmd[0].len = 4; |
| |
| /* Reading last code word from NC01 */ |
| /* 0xF14 */ |
| cmd[1].cmd = 0; |
| cmd[1].src = paddr(data[13]); |
| cmd[1].dst = EBI2_NAND_ADM_MUX; |
| cmd[1].len = 4; |
| |
| cmd[2].cmd = DST_CRCI_NAND_CMD; |
| cmd[2].src = paddr(&data[0]); |
| cmd[2].dst = NC01(NAND_FLASH_CMD); |
| cmd[2].len = 16; |
| |
| cmd[3].cmd = 0; |
| cmd[3].src = paddr(&data[8]); |
| cmd[3].dst = NC01(NAND_DEV0_CFG0); |
| cmd[3].len = 8; |
| |
| cmd[4].cmd = 0; |
| cmd[4].src = paddr(&data[5]); |
| cmd[4].dst = NC01(NAND_EXEC_CMD); |
| cmd[4].len = 4; |
| |
| /* 0xF28 */ |
| cmd[5].cmd = 0; |
| cmd[5].src = paddr(data[12]); |
| cmd[5].dst = EBI2_NAND_ADM_MUX; |
| cmd[5].len = 4; |
| |
| cmd[6].cmd = SRC_CRCI_NAND_DATA; |
| cmd[6].src = NC01(NAND_FLASH_STATUS); |
| cmd[6].dst = paddr(&data[6]); |
| cmd[6].len = 4; |
| |
| /* Reading last code word from NC10 */ |
| /* 0x53C */ |
| cmd[7].cmd = 0; |
| cmd[7].src = paddr(data[11]); |
| cmd[7].dst = EBI2_NAND_ADM_MUX; |
| cmd[7].len = 4; |
| |
| cmd[8].cmd = DST_CRCI_NAND_CMD; |
| cmd[8].src = paddr(&data[0]); |
| cmd[8].dst = NC10(NAND_FLASH_CMD); |
| cmd[8].len = 12; |
| |
| cmd[9].cmd = 0; |
| cmd[9].src = paddr(&data[4]); |
| cmd[9].dst = NC10(NAND_FLASH_CHIP_SELECT); |
| cmd[9].len = 4; |
| |
| cmd[10].cmd = 0; |
| cmd[10].src = paddr(&data[8]); |
| cmd[10].dst = NC10(NAND_DEV1_CFG0); |
| cmd[10].len = 8; |
| |
| cmd[11].cmd = 0; |
| cmd[11].src = paddr(&data[5]); |
| cmd[11].dst = NC10(NAND_EXEC_CMD); |
| cmd[11].len = 4; |
| |
| /* 0xA3C */ |
| cmd[12].cmd = 0; |
| cmd[12].src = paddr(data[10]); |
| cmd[12].dst = EBI2_NAND_ADM_MUX; |
| cmd[12].len = 4; |
| |
| cmd[13].cmd = SRC_CRCI_NAND_DATA; |
| cmd[13].src = NC10(NAND_FLASH_STATUS); |
| cmd[13].dst = paddr(&data[7]); |
| cmd[13].len = 4; |
| |
| /* adm default mux state */ |
| /* 0xFCO */ |
| cmd[14].cmd = 0; |
| cmd[14].src = paddr(data[14]); |
| cmd[14].dst = EBI2_NAND_ADM_MUX; |
| cmd[14].len = 4; |
| |
| /* disable CS1 */ |
| cmd[15].cmd = CMD_OCU | CMD_LC; |
| cmd[15].src = paddr(data[16]); |
| cmd[15].dst = EBI2_CHIP_SELECT_CFG0; |
| cmd[15].len = 4; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "NC01 status: %x\n", data[6]); |
| dprintf(INFO, "NC10 status: %x\n", data[7]); |
| #endif |
| |
| /* we fail if there was an operation error, a mpu error, or the |
| ** erase success bit was not set. |
| */ |
| if(data[6] & 0x110 || data[7] & 0x110) return -1; |
| if(!(data[6] & 0x80) || !(data[7] & 0x80)) return -1; |
| |
| return 0; |
| } |
| |
| struct data_flash_io { |
| unsigned cmd; |
| unsigned addr0; |
| unsigned addr1; |
| unsigned chipsel; |
| unsigned cfg0; |
| unsigned cfg1; |
| unsigned exec; |
| unsigned ecc_cfg; |
| unsigned ecc_cfg_save; |
| unsigned clrfstatus; |
| unsigned clrrstatus; |
| struct { |
| unsigned flash_status; |
| unsigned buffer_status; |
| } result[8]; |
| }; |
| |
| struct interleave_data_flash_io { |
| uint32_t cmd; |
| uint32_t addr0; |
| uint32_t addr1; |
| uint32_t chipsel_cs0; |
| uint32_t chipsel_cs1; |
| uint32_t cfg0; |
| uint32_t cfg1; |
| uint32_t exec; |
| uint32_t ecc_cfg; |
| uint32_t ecc_cfg_save; |
| uint32_t ebi2_chip_select_cfg0; |
| uint32_t adm_mux_data_ack_req_nc01; |
| uint32_t adm_mux_cmd_ack_req_nc01; |
| uint32_t adm_mux_data_ack_req_nc10; |
| uint32_t adm_mux_cmd_ack_req_nc10; |
| uint32_t adm_default_mux; |
| uint32_t default_ebi2_chip_select_cfg0; |
| struct { |
| uint32_t flash_status; |
| } result[16]; |
| }; |
| |
| static int _flash_nand_read_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, void *_addr, void *_spareaddr) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct data_flash_io *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned spareaddr = (unsigned) _spareaddr; |
| unsigned n; |
| int isbad = 0; |
| unsigned cwperpage; |
| cwperpage = (flash_pagesize >> 9); |
| |
| /* Check for bad block and read only from a good block */ |
| isbad = flash_nand_block_isbad(cmdlist, ptrlist, page); |
| if (isbad) |
| return -2; |
| |
| data->cmd = NAND_CMD_PAGE_READ_ECC; |
| data->addr0 = page << 16; |
| data->addr1 = (page >> 16) & 0xff; |
| data->chipsel = 0 | 4; /* flash0 + undoc bit */ |
| |
| /* GO bit for the EXEC register */ |
| data->exec = 1; |
| |
| data->cfg0 = CFG0; |
| data->cfg1 = CFG1; |
| |
| data->ecc_cfg = 0x203; |
| |
| /* save existing ecc config */ |
| cmd->cmd = CMD_OCB; |
| cmd->src = NAND_EBI2_ECC_BUF_CFG; |
| cmd->dst = paddr(&data->ecc_cfg_save); |
| cmd->len = 4; |
| cmd++; |
| |
| for(n = 0; n < cwperpage; n++) { |
| /* write CMD / ADDR0 / ADDR1 / CHIPSEL regs in a burst */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NAND_FLASH_CMD; |
| cmd->len = ((n == 0) ? 16 : 4); |
| cmd++; |
| |
| if (n == 0) { |
| /* block on cmd ready, set configuration */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->cfg0); |
| cmd->dst = NAND_DEV0_CFG0; |
| cmd->len = 8; |
| cmd++; |
| |
| /* set our ecc config */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->ecc_cfg); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| cmd++; |
| } |
| /* kick the execute register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NAND_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready, then read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_FLASH_STATUS; |
| cmd->dst = paddr(&data->result[n]); |
| cmd->len = 8; |
| cmd++; |
| |
| /* read data block */ |
| cmd->cmd = 0; |
| cmd->src = NAND_FLASH_BUFFER; |
| cmd->dst = addr + n * 516; |
| cmd->len = ((n < (cwperpage -1 )) ? 516 : (512 - ((cwperpage - 1) << 2))); |
| cmd++; |
| } |
| |
| /* read extra data */ |
| cmd->cmd = 0; |
| cmd->src = NAND_FLASH_BUFFER + 500; |
| cmd->dst = spareaddr; |
| cmd->len = 16; |
| cmd++; |
| |
| /* restore saved ecc config */ |
| cmd->cmd = CMD_OCU | CMD_LC; |
| cmd->src = paddr(&data->ecc_cfg_save); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "read page %d: status: %x %x %x %x\n", |
| page, data[5], data[6], data[7], data[8]); |
| for(n = 0; n < 4; n++) { |
| ptr = (unsigned*)(addr + 512 * n); |
| dprintf(INFO, "data%d: %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| ptr = (unsigned*)(spareaddr + 16 * n); |
| dprintf(INFO, "spare data%d %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| } |
| #endif |
| |
| /* if any of the writes failed (0x10), or there was a |
| ** protection violation (0x100), we lose |
| */ |
| for(n = 0; n < cwperpage; n++) { |
| if (data->result[n].flash_status & 0x110) { |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int flash_nand_read_page_interleave(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, void *_addr, void *_spareaddr) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct interleave_data_flash_io *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned spareaddr = (unsigned) _spareaddr; |
| unsigned n; |
| int isbad = 0; |
| unsigned cwperpage; |
| cwperpage = (flash_pagesize >> 9); |
| |
| /* Check for bad block and read only from a good block */ |
| isbad = flash_nand_block_isbad(cmdlist, ptrlist, page); |
| if (isbad) |
| return -2; |
| |
| data->cmd = NAND_CMD_PAGE_READ_ECC; |
| data->addr0 = page << 16; |
| data->addr1 = (page >> 16) & 0xff; |
| data->chipsel_cs0 = 0 | 4; /* flash0 + undoc bit */ |
| data->chipsel_cs1 = 0 | 5; /* flash0 + undoc bit */ |
| data->ebi2_chip_select_cfg0 = 0x00000805; |
| data->adm_mux_data_ack_req_nc01 = 0x00000A3C; |
| data->adm_mux_cmd_ack_req_nc01 = 0x0000053C; |
| data->adm_mux_data_ack_req_nc10 = 0x00000F28; |
| data->adm_mux_cmd_ack_req_nc10 = 0x00000F14; |
| data->adm_default_mux = 0x00000FC0; |
| data->default_ebi2_chip_select_cfg0 = 0x00000801; |
| |
| /* GO bit for the EXEC register */ |
| data->exec = 1; |
| |
| data->cfg0 = CFG0; |
| data->cfg1 = CFG1; |
| |
| data->ecc_cfg = 0x203; |
| |
| for (n = 0; n < cwperpage; n++) { |
| /* flash + buffer status return words */ |
| data->result[n].flash_status = 0xeeeeeeee; |
| |
| if (n == 0) { |
| /* enable CS1 */ |
| cmd->cmd = CMD_OCB; |
| cmd->src = paddr(&data->ebi2_chip_select_cfg0); |
| cmd->dst = EBI2_CHIP_SELECT_CFG0; |
| cmd->len = 4; |
| cmd++; |
| |
| /* save existing ecc config */ |
| cmd->cmd = 0; |
| cmd->src = NAND_EBI2_ECC_BUF_CFG; |
| cmd->dst = paddr(&data->ecc_cfg_save); |
| cmd->len = 4; |
| cmd++; |
| |
| /* NC01, NC10 --> ADDR0/ADDR1 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr0); |
| cmd->dst = NC11(NAND_ADDR0); |
| cmd->len = 8; |
| cmd++; |
| |
| /* Select the CS0, |
| * for NC01! |
| */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->chipsel_cs0); |
| cmd->dst = NC01(NAND_FLASH_CHIP_SELECT); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Select the CS1, |
| * for NC10! |
| */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->chipsel_cs1); |
| cmd->dst = NC10(NAND_FLASH_CHIP_SELECT); |
| cmd->len = 4; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->cfg0); |
| cmd->dst = NC01(NAND_DEV0_CFG0); |
| cmd->len = 8; |
| cmd++; |
| |
| /* config DEV1 for CS1 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->cfg0); |
| cmd->dst = NC10(NAND_DEV1_CFG0); |
| cmd->len = 8; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->ecc_cfg); |
| cmd->dst = NC11(NAND_EBI2_ECC_BUF_CFG); |
| cmd->len = 4; |
| cmd++; |
| |
| /* if 'only' the last code word */ |
| if (n == cwperpage - 1) { |
| /* MASK CMD ACK/REQ --> NC01 (0x53C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC10(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* kick the execute register for NC10 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC10(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* MASK DATA ACK/REQ --> NC01 (0xA3C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC10, then |
| * read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC10(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n]); |
| /* NAND_FLASH_STATUS + |
| * NAND_BUFFER_STATUS |
| */ |
| cmd->len = 4; |
| cmd++; |
| } else { |
| /* MASK CMD ACK/REQ --> NC10 (0xF14)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc10); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC01(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* kick the execute register for NC01*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC01(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| } |
| } |
| |
| |
| if (n % 2 == 0) { |
| /* MASK CMD ACK/REQ --> NC01 (0x53C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC10(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* kick the execute register for NC10 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC10(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* MASK DATA ACK/REQ --> NC10 (0xF28)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc10); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC01, then |
| * read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC01(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n]); |
| /* NAND_FLASH_STATUS + |
| * NAND_BUFFER_STATUS |
| */ |
| cmd->len = 4; |
| cmd++; |
| |
| /* read data block */ |
| cmd->cmd = 0; |
| cmd->src = NC01(NAND_FLASH_BUFFER); |
| cmd->dst = addr + n * 516; |
| cmd->len = ((n < (cwperpage -1 )) ? 516 : (512 - ((cwperpage - 1) << 2))); |
| cmd++; |
| } else { |
| if (n != cwperpage - 1) { |
| /* MASK CMD ACK/REQ --> |
| * NC10 (0xF14) |
| */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc10); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC01(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* EXEC */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC01(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* MASK DATA ACK/REQ --> |
| * NC01 (0xA3C) |
| */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC10 |
| * then read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC10(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n]); |
| /* NAND_FLASH_STATUS + |
| * NAND_BUFFER_STATUS |
| */ |
| cmd->len = 4; |
| cmd++; |
| } else { |
| /* MASK DATA ACK/REQ -> |
| * NC01 (0xA3C) |
| */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC10 |
| * then read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC10(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n]); |
| /* NAND_FLASH_STATUS + |
| * NAND_BUFFER_STATUS |
| */ |
| cmd->len = 4; |
| cmd++; |
| } |
| /* read data block */ |
| cmd->cmd = 0; |
| cmd->src = NC10(NAND_FLASH_BUFFER); |
| cmd->dst = addr + n * 516; |
| cmd->len = ((n < (cwperpage -1 )) ? 516 : (512 - ((cwperpage - 1) << 2))); |
| cmd++; |
| |
| if (n == (cwperpage - 1)) { |
| /* Use NC10 for reading the |
| * last codeword!!! |
| */ |
| cmd->cmd = 0; |
| cmd->src = NC10(NAND_FLASH_BUFFER) + |
| (512 - ((cwperpage -1) << 2)); |
| cmd->dst = spareaddr; |
| cmd->len = 16; |
| cmd++; |
| } |
| } |
| } |
| /* restore saved ecc config */ |
| cmd->cmd = CMD_OCU | CMD_LC; |
| cmd->src = paddr(&data->ecc_cfg_save); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| |
| /* ADM --> Default mux state (0xFC0) */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_default_mux); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* disable CS1 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->default_ebi2_chip_select_cfg0); |
| cmd->dst = EBI2_CHIP_SELECT_CFG0; |
| cmd->len = 4; |
| cmd++; |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "read page %d: status: %x %x %x %x %x %x %x %x \ |
| %x %x %x %x %x %x %x %x \n", page, |
| data->result[0].flash_status[0], |
| data->result[1].flash_status[1], |
| data->result[2].flash_status[2], |
| data->result[3].flash_status[3], |
| data->result[4].flash_status[4], |
| data->result[5].flash_status[5], |
| data->result[6].flash_status[6], |
| data->result[7].flash_status[7], |
| data->result[8].flash_status[8], |
| data->result[9].flash_status[9], |
| data->result[10].flash_status[10], |
| data->result[11].flash_status[11], |
| data->result[12].flash_status[12], |
| data->result[13].flash_status[13], |
| data->result[14].flash_status[14], |
| data->result[15].flash_status[15]); |
| |
| for(n = 0; n < 4; n++) { |
| ptr = (unsigned*)(addr + 512 * n); |
| dprintf(INFO, "data%d: %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| ptr = (unsigned*)(spareaddr + 16 * n); |
| dprintf(INFO, "spare data%d %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| } |
| #endif |
| |
| /* if any of the writes failed (0x10), or there was a |
| ** protection violation (0x100), we lose |
| */ |
| for(n = 0; n < cwperpage; n++) { |
| if (data->result[n].flash_status & 0x110) { |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int _flash_nand_write_page(dmov_s *cmdlist, unsigned *ptrlist, unsigned page, |
| const void *_addr, const void *_spareaddr, unsigned raw_mode) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct data_flash_io *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned spareaddr = (unsigned) _spareaddr; |
| unsigned n; |
| unsigned cwperpage; |
| cwperpage = (flash_pagesize >> 9); |
| unsigned modem_partition = 0; |
| if (CFG0 == CFG0_M) |
| { |
| modem_partition = 1; |
| } |
| |
| data->cmd = NAND_CMD_PRG_PAGE; |
| data->addr0 = page << 16; |
| data->addr1 = (page >> 16) & 0xff; |
| data->chipsel = 0 | 4; /* flash0 + undoc bit */ |
| data->clrfstatus = 0x00000020; |
| data->clrrstatus = 0x000000C0; |
| |
| if (!raw_mode){ |
| data->cfg0 = CFG0; |
| data->cfg1 = CFG1; |
| }else{ |
| data->cfg0 = (NAND_CFG0_RAW & ~(7 << 6)) |((cwperpage-1) << 6); |
| data->cfg1 = NAND_CFG1_RAW | (CFG1 & CFG1_WIDE_FLASH); |
| } |
| |
| /* GO bit for the EXEC register */ |
| data->exec = 1; |
| |
| if (modem_partition) |
| data->ecc_cfg = 0x1FF; |
| else |
| data->ecc_cfg = 0x203; |
| |
| /* save existing ecc config */ |
| cmd->cmd = CMD_OCB; |
| cmd->src = NAND_EBI2_ECC_BUF_CFG; |
| cmd->dst = paddr(&data->ecc_cfg_save); |
| cmd->len = 4; |
| cmd++; |
| |
| for(n = 0; n < cwperpage; n++) { |
| /* write CMD / ADDR0 / ADDR1 / CHIPSEL regs in a burst */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NAND_FLASH_CMD; |
| cmd->len = ((n == 0) ? 16 : 4); |
| cmd++; |
| |
| if (n == 0) { |
| /* set configuration */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->cfg0); |
| cmd->dst = NAND_DEV0_CFG0; |
| cmd->len = 8; |
| cmd++; |
| |
| /* set our ecc config */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->ecc_cfg); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| cmd++; |
| } |
| |
| /* write data block */ |
| cmd->cmd = 0; |
| cmd->dst = NAND_FLASH_BUFFER; |
| if (!raw_mode){ |
| if(modem_partition){ |
| cmd->src = addr + n * 512; |
| cmd->len = 512; |
| }else{ |
| cmd->src = addr + n * 516; |
| cmd->len = ((n < (cwperpage - 1)) ? 516 : (512 - ((cwperpage - 1) << 2))); |
| } |
| }else{ |
| cmd->src = addr; |
| cmd->len = 528; |
| } |
| cmd++; |
| |
| if ((n == (cwperpage - 1)) && (!raw_mode) && (!modem_partition)) { |
| /* write extra data */ |
| cmd->cmd = 0; |
| cmd->src = spareaddr; |
| cmd->dst = NAND_FLASH_BUFFER + (512 - ((cwperpage - 1) << 2)); |
| cmd->len = (cwperpage << 2); |
| cmd++; |
| } |
| |
| /* kick the execute register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NAND_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready, then read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_FLASH_STATUS; |
| cmd->dst = paddr(&data->result[n]); |
| cmd->len = 8; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->clrfstatus); |
| cmd->dst = NAND_FLASH_STATUS; |
| cmd->len = 4; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->clrrstatus); |
| cmd->dst = NAND_READ_STATUS; |
| cmd->len = 4; |
| cmd++; |
| } |
| |
| /* restore saved ecc config */ |
| cmd->cmd = CMD_OCU | CMD_LC; |
| cmd->src = paddr(&data->ecc_cfg_save); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "write page %d: status: %x %x %x %x\n", |
| page, data[5], data[6], data[7], data[8]); |
| #endif |
| |
| /* if any of the writes failed (0x10), or there was a |
| ** protection violation (0x100), or the program success |
| ** bit (0x80) is unset, we lose |
| */ |
| for(n = 0; n < cwperpage; n++) { |
| if(data->result[n].flash_status & 0x110) return -1; |
| if(!(data->result[n].flash_status & 0x80)) return -1; |
| } |
| |
| #if VERIFY_WRITE |
| n = _flash_read_page(cmdlist, ptrlist, page, flash_data, |
| flash_data + 2048); |
| if (n != 0) |
| return -1; |
| if (memcmp(flash_data, _addr, 2048) || |
| memcmp(flash_data + 2048, _spareaddr, 16)) { |
| dprintf(CRITICAL, "verify error @ page %d\n", page); |
| return -1; |
| } |
| #endif |
| return 0; |
| } |
| |
| static int flash_nand_write_page_interleave(dmov_s *cmdlist, unsigned *ptrlist, unsigned page, |
| const void *_addr, const void *_spareaddr, unsigned raw_mode) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct interleave_data_flash_io *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned spareaddr = (unsigned) _spareaddr; |
| unsigned n; |
| unsigned cwperpage, cwcount; |
| |
| cwperpage = (flash_pagesize >> 9) * 2; /* double for interleave mode */ |
| cwcount = (cwperpage << 1); |
| |
| data->cmd = NAND_CMD_PRG_PAGE; |
| data->addr0 = page << 16; |
| data->addr1 = (page >> 16) & 0xff; |
| data->chipsel_cs0 = 0 | 4; /* flash0 + undoc bit */ |
| data->chipsel_cs1 = 0 | 5; /* flash0 + undoc bit */ |
| data->ebi2_chip_select_cfg0 = 0x00000805; |
| data->adm_mux_data_ack_req_nc01 = 0x00000A3C; |
| data->adm_mux_cmd_ack_req_nc01 = 0x0000053C; |
| data->adm_mux_data_ack_req_nc10 = 0x00000F28; |
| data->adm_mux_cmd_ack_req_nc10 = 0x00000F14; |
| data->adm_default_mux = 0x00000FC0; |
| data->default_ebi2_chip_select_cfg0 = 0x00000801; |
| |
| if (!raw_mode){ |
| data->cfg0 = CFG0; |
| data->cfg1 = CFG1; |
| }else{ |
| data->cfg0 = (NAND_CFG0_RAW & ~(7 << 6)) |((cwcount-1) << 6); |
| data->cfg1 = NAND_CFG1_RAW | (CFG1 & CFG1_WIDE_FLASH); |
| } |
| |
| /* GO bit for the EXEC register */ |
| data->exec = 1; |
| data->ecc_cfg = 0x203; |
| |
| for (n = 0; n < cwperpage; n++) { |
| /* status return words */ |
| data->result[n].flash_status = 0xeeeeeeee; |
| |
| if (n == 0) { |
| /* enable CS1 */ |
| cmd->cmd = CMD_OCB; |
| cmd->src = paddr(&data->ebi2_chip_select_cfg0); |
| cmd->dst = EBI2_CHIP_SELECT_CFG0; |
| cmd->len = 4; |
| cmd++; |
| |
| /* save existing ecc config */ |
| cmd->cmd = 0; |
| cmd->src = NC11(NAND_EBI2_ECC_BUF_CFG); |
| cmd->dst = paddr(&data->ecc_cfg_save); |
| cmd->len = 4; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->ecc_cfg); |
| cmd->dst = NC11(NAND_EBI2_ECC_BUF_CFG); |
| cmd->len = 4; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr0); |
| cmd->dst = NC11(NAND_ADDR0); |
| cmd->len = 8; |
| cmd++; |
| |
| /* enable CS0 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->chipsel_cs0); |
| cmd->dst = NC01(NAND_FLASH_CHIP_SELECT); |
| cmd->len = 4; |
| cmd++; |
| |
| /* enable CS1 */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->chipsel_cs1); |
| cmd->dst = NC10(NAND_FLASH_CHIP_SELECT); |
| cmd->len = 4; |
| cmd++; |
| |
| cmd->cmd = 0; |
| cmd->src =paddr(&data->cfg0); |
| cmd->dst = NC01(NAND_DEV0_CFG0); |
| cmd->len = 8; |
| cmd++; |
| |
| /* config CFG1 for CS1 */ |
| cmd->cmd = 0; |
| cmd->src =paddr(&data->cfg0); |
| cmd->dst = NC10(NAND_DEV1_CFG0); |
| cmd->len = 8; |
| cmd++; |
| } |
| |
| if (n % 2 == 0) { |
| /* MASK CMD ACK/REQ --> NC10 (0xF14)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc10); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC01(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| } else { |
| /* MASK CMD ACK/REQ --> NC01 (0x53C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_cmd_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* CMD */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->cmd); |
| cmd->dst = NC10(NAND_FLASH_CMD); |
| cmd->len = 4; |
| cmd++; |
| } |
| |
| cmd->cmd = 0; |
| if (!raw_mode){ |
| cmd->src = addr + n * 516; |
| cmd->len = ((n < (cwperpage - 1)) ? 516 : (512 - ((cwperpage - 1) << 2))); |
| }else{ |
| cmd->src = addr; |
| cmd->len = 528; |
| } |
| |
| if (n % 2 == 0) |
| cmd->dst = NC01(NAND_FLASH_BUFFER); |
| else |
| cmd->dst = NC10(NAND_FLASH_BUFFER); |
| cmd++; |
| |
| if ((n == (cwperpage - 1)) && (!raw_mode)) { |
| /* write extra data */ |
| cmd->cmd = 0; |
| cmd->src = spareaddr; |
| cmd->dst = NC10(NAND_FLASH_BUFFER) + (512 - ((cwperpage - 1) << 2)); |
| cmd->len = (cwperpage << 2); |
| cmd++; |
| } |
| |
| if (n % 2 == 0) { |
| /* kick the NC01 execute register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC01(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| if (n != 0) { |
| /* MASK DATA ACK/REQ --> NC01 (0xA3C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC10, then |
| * read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC10(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n-1]); |
| cmd->len = 4; |
| cmd++; |
| } |
| } else { |
| /* kick the execute register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->exec); |
| cmd->dst = NC10(NAND_EXEC_CMD); |
| cmd->len = 4; |
| cmd++; |
| |
| /* MASK DATA ACK/REQ --> NC10 (0xF28)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc10); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* block on data ready from NC01, then |
| * read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC01(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n-1]); |
| cmd->len = 4; |
| cmd++; |
| } |
| } |
| |
| /* MASK DATA ACK/REQ --> NC01 (0xA3C)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_mux_data_ack_req_nc01); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* we should process outstanding request */ |
| /* block on data ready, then |
| * read the status register |
| */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NC10(NAND_FLASH_STATUS); |
| cmd->dst = paddr(&data->result[n-1]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* restore saved ecc config */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->ecc_cfg_save); |
| cmd->dst = NAND_EBI2_ECC_BUF_CFG; |
| cmd->len = 4; |
| |
| /* MASK DATA ACK/REQ --> NC01 (0xFC0)*/ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->adm_default_mux); |
| cmd->dst = EBI2_NAND_ADM_MUX; |
| cmd->len = 4; |
| cmd++; |
| |
| /* disable CS1 */ |
| cmd->cmd = CMD_OCU | CMD_LC; |
| cmd->src = paddr(&data->default_ebi2_chip_select_cfg0); |
| cmd->dst = EBI2_CHIP_SELECT_CFG0; |
| cmd->len = 4; |
| cmd++; |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "write page %d: status: %x %x %x %x %x %x %x %x \ |
| %x %x %x %x %x %x %x %x \n", page, |
| data->result[0].flash_status[0], |
| data->result[1].flash_status[1], |
| data->result[2].flash_status[2], |
| data->result[3].flash_status[3], |
| data->result[4].flash_status[4], |
| data->result[5].flash_status[5], |
| data->result[6].flash_status[6], |
| data->result[7].flash_status[7], |
| data->result[8].flash_status[8], |
| data->result[9].flash_status[9], |
| data->result[10].flash_status[10], |
| data->result[11].flash_status[11], |
| data->result[12].flash_status[12], |
| data->result[13].flash_status[13], |
| data->result[14].flash_status[14], |
| data->result[15].flash_status[15]); |
| #endif |
| |
| /* if any of the writes failed (0x10), or there was a |
| ** protection violation (0x100), or the program success |
| ** bit (0x80) is unset, we lose |
| */ |
| for(n = 0; n < cwperpage; n++) { |
| if(data->result[n].flash_status & 0x110) return -1; |
| if(!(data->result[n].flash_status & 0x80)) return -1; |
| } |
| |
| #if VERIFY_WRITE |
| n = _flash_read_page(cmdlist, ptrlist, page, flash_data, |
| flash_data + 2048); |
| if (n != 0) |
| return -1; |
| if (memcmp(flash_data, _addr, 2048) || |
| memcmp(flash_data + 2048, _spareaddr, 16)) { |
| dprintf(CRITICAL, "verify error @ page %d\n", page); |
| return -1; |
| } |
| #endif |
| return 0; |
| } |
| |
| char empty_buf[528]; |
| static int flash_nand_mark_badblock(dmov_s *cmdlist, unsigned *ptrlist, unsigned page) |
| { |
| memset(empty_buf,0,528); |
| /* Going to first page of the block */ |
| if(page & 63) |
| page = page - (page & 63); |
| return _flash_nand_write_page(cmdlist, ptrlist, page, empty_buf, 0, 1); |
| } |
| |
| unsigned nand_cfg0; |
| unsigned nand_cfg1; |
| |
| static int flash_nand_read_config(dmov_s *cmdlist, unsigned *ptrlist) |
| { |
| static unsigned CFG0_TMP, CFG1_TMP; |
| cmdlist[0].cmd = CMD_OCB; |
| cmdlist[0].src = NAND_DEV0_CFG0; |
| cmdlist[0].dst = paddr(&CFG0_TMP); |
| cmdlist[0].len = 4; |
| |
| cmdlist[1].cmd = CMD_OCU | CMD_LC; |
| cmdlist[1].src = NAND_DEV0_CFG1; |
| cmdlist[1].dst = paddr(&CFG1_TMP); |
| cmdlist[1].len = 4; |
| |
| *ptrlist = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptrlist); |
| |
| if((CFG0_TMP == 0) || (CFG1_TMP == 0)) { |
| return -1; |
| } |
| |
| CFG0_A = CFG0_TMP; |
| CFG1_A = CFG1_TMP; |
| if (flash_info.type == FLASH_16BIT_NAND_DEVICE) { |
| nand_cfg1 |= CFG1_WIDE_FLASH; |
| } |
| dprintf(INFO, "nandcfg: %x %x (initial)\n", CFG0, CFG1); |
| |
| CFG0_A = (((flash_pagesize >> 9) - 1) << 6) /* 4/8 cw/pg for 2/4k */ |
| | (516 << 9) /* 516 user data bytes */ |
| | (10 << 19) /* 10 parity bytes */ |
| | (5 << 27) /* 5 address cycles */ |
| | (0 << 30) /* Do not read status before data */ |
| | (1 << 31) /* Send read cmd */ |
| /* 0 spare bytes for 16 bit nand or 1 spare bytes for 8 bit */ |
| | ((nand_cfg1 & CFG1_WIDE_FLASH) ? (0 << 23) : (1 << 23)); |
| CFG1_A = (0 << 0) /* Enable ecc */ |
| | (7 << 2) /* 8 recovery cycles */ |
| | (0 << 5) /* Allow CS deassertion */ |
| | ((flash_pagesize - (528 * ((flash_pagesize >> 9) - 1)) + 1) << 6) /* Bad block marker location */ |
| | (0 << 16) /* Bad block in user data area */ |
| | (2 << 17) /* 6 cycle tWB/tRB */ |
| | (nand_cfg1 & CFG1_WIDE_FLASH); /* preserve wide flash flag */ |
| |
| dprintf(INFO, "nandcfg(Apps): %x %x (used)\n", CFG0_A, CFG1_A); |
| |
| CFG0_M = CFG0_TMP; |
| CFG1_M = CFG1_TMP; |
| if (flash_info.type == FLASH_16BIT_NAND_DEVICE) { |
| nand_cfg1 |= CFG1_WIDE_FLASH; |
| } |
| CFG0_M = (((flash_pagesize >> 9) - 1) << 6) /* 4/8 cw/pg for 2/4k */ |
| | (512 << 9) /* 512 user data bytes */ |
| | (10 << 19) /* 10 parity bytes */ |
| | (5 << 27) /* 5 address cycles */ |
| | (0 << 30) /* Do not read status before data */ |
| | (1 << 31) /* Send read cmd */ |
| | ((nand_cfg1 & CFG1_WIDE_FLASH) ? (4 << 23) : (5 << 23)); |
| CFG1_M = (0 << 0) /* Enable ecc */ |
| | (7 << 2) /* 8 recovery cycles */ |
| | (0 << 5) /* Allow CS deassertion */ |
| | ((flash_pagesize - (528 * ((flash_pagesize >> 9) - 1)) + 1) << 6) /* Bad block marker location */ |
| | (0 << 16) /* Bad block in user data area */ |
| | (2 << 17) /* 6 cycle tWB/tRB */ |
| | (nand_cfg1 & CFG1_WIDE_FLASH); /* preserve wide flash flag */ |
| dprintf(INFO, "nandcfg(Modem): %x %x (used)\n", CFG0_M, CFG1_M); |
| return 0; |
| } |
| |
| /* OneNAND programming functions */ |
| |
| static void flash_onenand_read_id(dmov_s *cmdlist, unsigned *ptrlist) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| unsigned *data = ptrlist + 4; |
| |
| data[0] = SFLASH_BCFG; |
| data[1] = SFLASH_PREPCMD(8, 0, 0, NAND_SFCMD_DATXS, NAND_SFCMD_ASYNC, NAND_SFCMD_REGRD); |
| data[2] = (ONENAND_DEVICE_ID << 16) | (ONENAND_MANUFACTURER_ID); |
| data[3] = (ONENAND_DATA_BUFFER_SIZE << 16) | (ONENAND_VERSION_ID); |
| data[4] = (ONENAND_AMOUNT_OF_BUFFERS << 16) | (ONENAND_BOOT_BUFFER_SIZE); |
| data[5] = (CLEAN_DATA_16 << 16) | (ONENAND_TECHNOLOGY); |
| data[6] = CLEAN_DATA_32; //status |
| data[7] = CLEAN_DATA_32; //register read |
| data[8] = CLEAN_DATA_32; //register read |
| data[9] = CLEAN_DATA_32; //register read |
| data[10] = CLEAN_DATA_32; //register read |
| data[11] = 1; |
| data[12] = 0 | 4; |
| |
| /* Setup controller in SFLASH mode */ |
| cmd[0].cmd = 0 | CMD_OCB; |
| cmd[0].src = paddr(&data[0]); |
| cmd[0].dst = NAND_SFLASHC_BURST_CFG; |
| cmd[0].len = 4; |
| |
| /* Enable data mover for controller */ |
| cmd[1].cmd = 0; |
| cmd[1].src = paddr(&data[12]); |
| cmd[1].dst = NAND_FLASH_CHIP_SELECT; |
| cmd[1].len = 4; |
| |
| /* Setup SFLASHC_CMD with xfers in async mode */ |
| cmd[2].cmd = DST_CRCI_NAND_CMD; |
| cmd[2].src = paddr(&data[1]); |
| cmd[2].dst = NAND_SFLASHC_CMD; |
| cmd[2].len = 4; |
| |
| /* Setup to read device information */ |
| cmd[3].cmd = 0; |
| cmd[3].src = paddr(&data[2]); |
| cmd[3].dst = NAND_ADDR0; |
| cmd[3].len = 8; |
| |
| cmd[4].cmd = 0; |
| cmd[4].src = paddr(&data[4]); |
| cmd[4].dst = NAND_ADDR2; |
| cmd[4].len = 8; |
| |
| /* Set execute bit */ |
| cmd[5].cmd = 0; |
| cmd[5].src = paddr(&data[11]); |
| cmd[5].dst = NAND_SFLASHC_EXEC_CMD; |
| cmd[5].len = 4; |
| |
| /* Check status */ |
| cmd[6].cmd = SRC_CRCI_NAND_DATA; |
| cmd[6].src = NAND_SFLASHC_STATUS; |
| cmd[6].dst = paddr(&data[6]); |
| cmd[6].len = 4; |
| |
| /* Read result device registers */ |
| cmd[7].cmd = 0 | CMD_OCU | CMD_LC; |
| cmd[7].src = NAND_GENP_REG0; |
| cmd[7].dst = paddr(&data[7]); |
| cmd[7].len = 16; |
| |
| ptr[0] = (paddr(cmd) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| #if VERBOSE |
| dprintf(INFO, "status: %x\n", data[6]); |
| #endif |
| |
| flash_info.id = data[7]; |
| flash_info.vendor = data[7] & CLEAN_DATA_16; |
| flash_info.device = (data[7] >> 16) & CLEAN_DATA_16; |
| return; |
| } |
| |
| |
| struct data_onenand_erase { |
| unsigned sfbcfg; |
| unsigned sfcmd[4]; |
| unsigned sfexec; |
| unsigned sfstat[4]; |
| unsigned addr0; |
| unsigned addr1; |
| unsigned addr2; |
| unsigned addr3; |
| unsigned addr4; |
| unsigned addr5; |
| unsigned addr6; |
| unsigned data0; |
| unsigned data1; |
| unsigned data2; |
| unsigned data3; |
| unsigned data4; |
| unsigned data5; |
| unsigned data6; |
| }; |
| |
| |
| static int _flash_onenand_read_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, void *_addr, |
| void *_spareaddr, unsigned raw_mode); |
| |
| |
| static int flash_onenand_block_isbad(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| unsigned char page_data[2112]; |
| unsigned char *oobptr = &(page_data[2048]); |
| |
| /* Going to first page of the block */ |
| if(page & 63) |
| page = page - (page & 63); |
| |
| /* Reading page in raw mode */ |
| if (_flash_onenand_read_page(cmdlist, ptrlist,page, page_data, 0, 1)) |
| return 1; |
| |
| /* Checking if block is bad */ |
| if ((oobptr[0] != 0xFF) || (oobptr[1] != 0xFF) || |
| (oobptr[16] != 0xFF) || (oobptr[17] != 0xFF) || |
| (oobptr[32] != 0xFF) || (oobptr[33] != 0xFF) || |
| (oobptr[48] != 0xFF) || (oobptr[49] != 0xFF) |
| ) |
| { |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int flash_onenand_erase_block(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct data_onenand_erase *data = (void *)ptrlist + 4; |
| int isbad = 0; |
| unsigned erasesize = (flash_pagesize << 6); |
| unsigned onenand_startaddr1 = DEVICE_FLASHCORE_0 | (page * flash_pagesize)/erasesize; |
| unsigned onenand_startaddr8 = 0x0000; |
| unsigned onenand_startaddr2 = DEVICE_BUFFERRAM_0 << 15; |
| unsigned onenand_startbuffer = DATARAM0_0 << 8; |
| |
| unsigned controller_status; |
| unsigned interrupt_status; |
| unsigned ecc_status; |
| |
| if((page * flash_pagesize) & (erasesize-1)) return -1; |
| |
| /* Check for bad block and erase only if block is not marked bad */ |
| isbad = flash_onenand_block_isbad(cmdlist, ptrlist, page); |
| if (isbad) |
| { |
| dprintf(INFO, "skipping @ %d (bad block)\n", page >> 6); |
| return -1; |
| } |
| |
| /*Erase block*/ |
| onenand_startaddr1 = DEVICE_FLASHCORE_0 | |
| ((page * flash_pagesize) / (erasesize)); |
| onenand_startaddr8 = 0x0000; |
| onenand_startaddr2 = DEVICE_BUFFERRAM_0 << 15; |
| onenand_startbuffer = DATARAM0_0 << 8; |
| |
| |
| data->sfbcfg = SFLASH_BCFG; |
| data->sfcmd[0] = SFLASH_PREPCMD(7, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfcmd[1] = SFLASH_PREPCMD(0, 0, 32, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_INTHI); |
| data->sfcmd[2] = SFLASH_PREPCMD(3, 7, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGRD); |
| data->sfcmd[3] = SFLASH_PREPCMD(4, 10, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfexec = 1; |
| data->sfstat[0] = CLEAN_DATA_32; |
| data->sfstat[1] = CLEAN_DATA_32; |
| data->sfstat[2] = CLEAN_DATA_32; |
| data->sfstat[3] = CLEAN_DATA_32; |
| data->addr0 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr1 = (ONENAND_START_ADDRESS_8 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->addr2 = (ONENAND_START_BUFFER << 16) | |
| (ONENAND_START_ADDRESS_2); |
| data->addr3 = (ONENAND_ECC_STATUS << 16) | |
| (ONENAND_COMMAND); |
| data->addr4 = (ONENAND_CONTROLLER_STATUS << 16) | |
| (ONENAND_INTERRUPT_STATUS); |
| data->addr5 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr6 = (ONENAND_START_ADDRESS_3 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->data0 = (ONENAND_CLRINTR << 16) | |
| (ONENAND_SYSCFG1_ECCENA); |
| data->data1 = (onenand_startaddr8 << 16) | |
| (onenand_startaddr1); |
| data->data2 = (onenand_startbuffer << 16) | |
| (onenand_startaddr2); |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDERAS); |
| data->data4 = (CLEAN_DATA_16 << 16) | |
| (CLEAN_DATA_16); |
| data->data5 = (ONENAND_CLRINTR << 16) | |
| (ONENAND_SYSCFG1_ECCENA); |
| data->data6 = (ONENAND_STARTADDR3_RES << 16) | |
| (ONENAND_STARTADDR1_RES); |
| |
| /***************************************************************/ |
| /* Write the necessary address registers in the onenand device */ |
| /***************************************************************/ |
| |
| /* Enable and configure the SFlash controller */ |
| cmd->cmd = 0 | CMD_OCB; |
| cmd->src = paddr(&data->sfbcfg); |
| cmd->dst = NAND_SFLASHC_BURST_CFG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[0]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the ADDR0 and ADDR1 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr0); |
| cmd->dst = NAND_ADDR0; |
| cmd->len = 8; |
| cmd++; |
| |
| /* Write the ADDR2 ADDR3 ADDR4 ADDR5 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr2); |
| cmd->dst = NAND_ADDR2; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the ADDR6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr6); |
| cmd->dst = NAND_ADDR6; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the GENP0, GENP1, GENP2, GENP3, GENP4 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data0); |
| cmd->dst = NAND_GENP_REG0; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the FLASH_DEV_CMD4,5,6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data4); |
| cmd->dst = NAND_DEV_CMD4; |
| cmd->len = 12; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[0]); |
| cmd->len = 4; |
| cmd++; |
| |
| /***************************************************************/ |
| /* Wait for the interrupt from the Onenand device controller */ |
| /***************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[1]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[1]); |
| cmd->len = 4; |
| cmd++; |
| |
| /***************************************************************/ |
| /* Read the necessary status registers from the onenand device */ |
| /***************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[2]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[2]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the GENP3 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_GENP_REG3; |
| cmd->dst = paddr(&data->data3); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the DEVCMD4 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_DEV_CMD4; |
| cmd->dst = paddr(&data->data4); |
| cmd->len = 4; |
| cmd++; |
| |
| /***************************************************************/ |
| /* Restore the necessary registers to proper values */ |
| /***************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[3]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA | CMD_OCU | CMD_LC; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[3]); |
| cmd->len = 4; |
| cmd++; |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| ecc_status = (data->data3 >> 16) & 0x0000FFFF; |
| interrupt_status = (data->data4 >> 0) & 0x0000FFFF; |
| controller_status = (data->data4 >> 16) & 0x0000FFFF; |
| |
| #if VERBOSE |
| dprintf(INFO, "\n%s: sflash status %x %x %x %x\n", __func__, |
| data->sfstat[0], |
| data->sfstat[1], |
| data->sfstat[2], |
| data->sfstat[3]); |
| |
| dprintf(INFO, "%s: controller_status = %x\n", __func__, |
| controller_status); |
| dprintf(INFO, "%s: interrupt_status = %x\n", __func__, |
| interrupt_status); |
| dprintf(INFO, "%s: ecc_status = %x\n", __func__, |
| ecc_status); |
| #endif |
| /* Check for errors, protection violations etc */ |
| if ((controller_status != 0) |
| || (data->sfstat[0] & 0x110) |
| || (data->sfstat[1] & 0x110) |
| || (data->sfstat[2] & 0x110) |
| || (data->sfstat[3] & 0x110)) { |
| dprintf(CRITICAL, "%s: ECC/MPU/OP error\n", __func__); |
| return -1; |
| } |
| |
| |
| #if VERBOSE |
| dprintf(INFO, "status: %x\n", data[5]); |
| #endif |
| |
| return 0; |
| } |
| |
| |
| struct data_onenand_read { |
| unsigned sfbcfg; |
| unsigned sfcmd[9]; |
| unsigned sfexec; |
| unsigned sfstat[9]; |
| unsigned addr0; |
| unsigned addr1; |
| unsigned addr2; |
| unsigned addr3; |
| unsigned addr4; |
| unsigned addr5; |
| unsigned addr6; |
| unsigned data0; |
| unsigned data1; |
| unsigned data2; |
| unsigned data3; |
| unsigned data4; |
| unsigned data5; |
| unsigned data6; |
| unsigned macro[5]; |
| }; |
| |
| |
| static int _flash_onenand_read_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, void *_addr, void *_spareaddr, |
| unsigned raw_mode) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct data_onenand_read *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned curr_addr = (unsigned) _addr; |
| unsigned spareaddr = (unsigned) _spareaddr; |
| unsigned i; |
| unsigned erasesize = (flash_pagesize<<6); |
| unsigned writesize = flash_pagesize; |
| |
| unsigned onenand_startaddr1 = DEVICE_FLASHCORE_0 | |
| ((unsigned)(page * flash_pagesize) / erasesize); |
| unsigned onenand_startaddr8 = (((unsigned)(page * flash_pagesize) & |
| (erasesize - 1)) / writesize) << 2; |
| unsigned onenand_startaddr2 = DEVICE_BUFFERRAM_0 << 15; |
| unsigned onenand_startbuffer = DATARAM0_0 << 8; |
| unsigned onenand_sysconfig1 = (raw_mode == 1) ? ONENAND_SYSCFG1_ECCDIS :\ |
| ONENAND_SYSCFG1_ECCENA; |
| |
| unsigned controller_status; |
| unsigned interrupt_status; |
| unsigned ecc_status; |
| if (raw_mode != 1) |
| { |
| int isbad = 0; |
| isbad = flash_onenand_block_isbad(cmdlist, ptrlist, page); |
| if (isbad) |
| return -2; |
| } |
| |
| //static int oobfree_offset[8] = {2, 14, 18, 30, 34, 46, 50, 62}; |
| //static int oobfree_length[8] = {3, 2, 3, 2, 3, 2, 3, 2}; |
| |
| data->sfbcfg = SFLASH_BCFG; |
| data->sfcmd[0] = SFLASH_PREPCMD(7, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfcmd[1] = SFLASH_PREPCMD(0, 0, 32, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_INTHI); |
| data->sfcmd[2] = SFLASH_PREPCMD(3, 7, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGRD); |
| data->sfcmd[3] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATRD); |
| data->sfcmd[4] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATRD); |
| data->sfcmd[5] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATRD); |
| data->sfcmd[6] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATRD); |
| data->sfcmd[7] = SFLASH_PREPCMD(32, 0, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATRD); |
| data->sfcmd[8] = SFLASH_PREPCMD(4, 10, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfexec = 1; |
| data->sfstat[0] = CLEAN_DATA_32; |
| data->sfstat[1] = CLEAN_DATA_32; |
| data->sfstat[2] = CLEAN_DATA_32; |
| data->sfstat[3] = CLEAN_DATA_32; |
| data->sfstat[4] = CLEAN_DATA_32; |
| data->sfstat[5] = CLEAN_DATA_32; |
| data->sfstat[6] = CLEAN_DATA_32; |
| data->sfstat[7] = CLEAN_DATA_32; |
| data->sfstat[8] = CLEAN_DATA_32; |
| |
| data->addr0 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr1 = (ONENAND_START_ADDRESS_8 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->addr2 = (ONENAND_START_BUFFER << 16) | |
| (ONENAND_START_ADDRESS_2); |
| data->addr3 = (ONENAND_ECC_STATUS << 16) | |
| (ONENAND_COMMAND); |
| data->addr4 = (ONENAND_CONTROLLER_STATUS << 16) | |
| (ONENAND_INTERRUPT_STATUS); |
| data->addr5 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr6 = (ONENAND_START_ADDRESS_3 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->data0 = (ONENAND_CLRINTR << 16) | |
| (onenand_sysconfig1); |
| data->data1 = (onenand_startaddr8 << 16) | |
| (onenand_startaddr1); |
| data->data2 = (onenand_startbuffer << 16) | |
| (onenand_startaddr2); |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDLOADSPARE); |
| data->data4 = (CLEAN_DATA_16 << 16) | |
| (CLEAN_DATA_16); |
| data->data5 = (ONENAND_CLRINTR << 16) | |
| (ONENAND_SYSCFG1_ECCENA); |
| data->data6 = (ONENAND_STARTADDR3_RES << 16) | |
| (ONENAND_STARTADDR1_RES); |
| data->macro[0] = 0x0200; |
| data->macro[1] = 0x0300; |
| data->macro[2] = 0x0400; |
| data->macro[3] = 0x0500; |
| data->macro[4] = 0x8010; |
| |
| /*************************************************************/ |
| /* Write necessary address registers in the onenand device */ |
| /*************************************************************/ |
| |
| /* Enable and configure the SFlash controller */ |
| cmd->cmd = 0 | CMD_OCB; |
| cmd->src = paddr(&data->sfbcfg); |
| cmd->dst = NAND_SFLASHC_BURST_CFG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[0]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the ADDR0 and ADDR1 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr0); |
| cmd->dst = NAND_ADDR0; |
| cmd->len = 8; |
| cmd++; |
| |
| /* Write the ADDR2 ADDR3 ADDR4 ADDR5 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr2); |
| cmd->dst = NAND_ADDR2; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the ADDR6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr6); |
| cmd->dst = NAND_ADDR6; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the GENP0, GENP1, GENP2, GENP3 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data0); |
| cmd->dst = NAND_GENP_REG0; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the FLASH_DEV_CMD4,5,6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data4); |
| cmd->dst = NAND_DEV_CMD4; |
| cmd->len = 12; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[0]); |
| cmd->len = 4; |
| cmd++; |
| |
| /*************************************************************/ |
| /* Wait for the interrupt from the Onenand device controller */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[1]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[1]); |
| cmd->len = 4; |
| cmd++; |
| |
| |
| /*************************************************************/ |
| /* Read necessary status registers from the onenand device */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[2]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[2]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the GENP3 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_GENP_REG3; |
| cmd->dst = paddr(&data->data3); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the DEVCMD4 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_DEV_CMD4; |
| cmd->dst = paddr(&data->data4); |
| cmd->len = 4; |
| cmd++; |
| |
| |
| /*************************************************************/ |
| /* Read the data ram area from the onenand buffer ram */ |
| /*************************************************************/ |
| |
| if (addr) { |
| |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDLOAD); |
| |
| for (i = 0; i < 4; i++) { |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[3+i]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the MACRO1 register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->macro[i]); |
| cmd->dst = NAND_MACRO1_REG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data rdy, & read status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[3+i]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Transfer nand ctlr buf contents to usr buf */ |
| cmd->cmd = 0; |
| cmd->src = NAND_FLASH_BUFFER; |
| cmd->dst = curr_addr; |
| cmd->len = 512; |
| curr_addr += 512; |
| cmd++; |
| } |
| } |
| |
| /* Read oob bytes in Raw Mode */ |
| if (raw_mode == 1) |
| { |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[7]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the MACRO1 register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->macro[4]); |
| cmd->dst = NAND_MACRO1_REG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data rdy, & read status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[7]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Transfer nand ctlr buf contents to usr buf */ |
| cmd->cmd = 0; |
| cmd->src = NAND_FLASH_BUFFER; |
| cmd->dst = curr_addr; |
| cmd->len = 64; |
| curr_addr += 64; |
| cmd++; |
| } |
| |
| /*************************************************************/ |
| /* Restore the necessary registers to proper values */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[8]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA | CMD_OCU | CMD_LC; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[8]); |
| cmd->len = 4; |
| cmd++; |
| |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| |
| ecc_status = (data->data3 >> 16) & |
| 0x0000FFFF; |
| interrupt_status = (data->data4 >> 0) & |
| 0x0000FFFF; |
| controller_status = (data->data4 >> 16) & |
| 0x0000FFFF; |
| |
| #if VERBOSE |
| dprintf(INFO, "\n%s: sflash status %x %x %x %x %x %x %x" |
| "%x %x\n", __func__, |
| data->sfstat[0], |
| data->sfstat[1], |
| data->sfstat[2], |
| data->sfstat[3], |
| data->sfstat[4], |
| data->sfstat[5], |
| data->sfstat[6], |
| data->sfstat[7]); |
| |
| dprintf(INFO, "%s: controller_status = %x\n", __func__, |
| controller_status); |
| dprintf(INFO, "%s: interrupt_status = %x\n", __func__, |
| interrupt_status); |
| dprintf(INFO, "%s: ecc_status = %x\n", __func__, |
| ecc_status); |
| #endif |
| /* Check for errors, protection violations etc */ |
| if ((controller_status != 0) |
| || (data->sfstat[0] & 0x110) |
| || (data->sfstat[1] & 0x110) |
| || (data->sfstat[2] & 0x110) |
| || ((data->sfstat[3] & 0x110) && |
| (addr)) |
| || ((data->sfstat[4] & 0x110) && |
| (addr)) |
| || ((data->sfstat[5] & 0x110) && |
| (addr)) |
| || ((data->sfstat[6] & 0x110) && |
| (addr))) { |
| dprintf(INFO, "%s: ECC/MPU/OP error\n", __func__); |
| return -1; |
| } |
| |
| #if VERBOSE |
| dprintf(INFO, "read page %d: status: %x %x %x %x\n", |
| page, data[5], data[6], data[7], data[8]); |
| for(n = 0; n < 4; n++) { |
| ptr = (unsigned*)(addr + 512 * n); |
| dprintf(INFO, "data%d: %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| ptr = (unsigned*)(spareaddr + 16 * n); |
| dprintf(INFO, "spare data%d %x %x %x %x\n", n, ptr[0], ptr[1], ptr[2], ptr[3]); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| |
| struct data_onenand_write { |
| unsigned sfbcfg; |
| unsigned sfcmd[9]; |
| unsigned sfexec; |
| unsigned sfstat[9]; |
| unsigned addr0; |
| unsigned addr1; |
| unsigned addr2; |
| unsigned addr3; |
| unsigned addr4; |
| unsigned addr5; |
| unsigned addr6; |
| unsigned data0; |
| unsigned data1; |
| unsigned data2; |
| unsigned data3; |
| unsigned data4; |
| unsigned data5; |
| unsigned data6; |
| unsigned macro[5]; |
| }; |
| |
| static int _flash_onenand_write_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, const void *_addr, |
| const void *_spareaddr, unsigned raw_mode) |
| { |
| dmov_s *cmd = cmdlist; |
| unsigned *ptr = ptrlist; |
| struct data_onenand_write *data = (void*) (ptrlist + 4); |
| unsigned addr = (unsigned) _addr; |
| unsigned addr_curr = (unsigned) _addr; |
| char * spareaddr = (char *) _spareaddr; |
| unsigned i, j, k; |
| |
| unsigned erasesize = (flash_pagesize<<6); |
| unsigned writesize = flash_pagesize; |
| |
| unsigned onenand_startaddr1 = (page * flash_pagesize) / erasesize; |
| unsigned onenand_startaddr8 = (((unsigned)(page * flash_pagesize) & |
| (erasesize-1)) / writesize) << 2; |
| unsigned onenand_startaddr2 = DEVICE_BUFFERRAM_0 << 15; |
| unsigned onenand_startbuffer = DATARAM0_0 << 8; |
| unsigned onenand_sysconfig1 = (raw_mode == 1) ? ONENAND_SYSCFG1_ECCDIS :\ |
| ONENAND_SYSCFG1_ECCENA; |
| |
| unsigned controller_status; |
| unsigned interrupt_status; |
| unsigned ecc_status; |
| |
| char flash_oob[64]; |
| |
| unsigned oobfree_offset[8] = {2, 14, 18, 30, 34, 46, 50, 62}; |
| unsigned oobfree_length[8] = {3, 2, 3, 2, 3, 2, 3, 2}; |
| |
| for (i = 0; i < 64; i++) |
| flash_oob[i] = 0xFF; |
| |
| data->sfbcfg = SFLASH_BCFG; |
| data->sfcmd[0] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATWR); |
| data->sfcmd[1] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATWR); |
| data->sfcmd[2] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATWR); |
| data->sfcmd[3] = SFLASH_PREPCMD(256, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATWR); |
| data->sfcmd[4] = SFLASH_PREPCMD(32, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_DATWR); |
| data->sfcmd[5] = SFLASH_PREPCMD(7, 0, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfcmd[6] = SFLASH_PREPCMD(0, 0, 32, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_INTHI); |
| data->sfcmd[7] = SFLASH_PREPCMD(3, 7, 0, |
| NAND_SFCMD_DATXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGRD); |
| data->sfcmd[8] = SFLASH_PREPCMD(4, 10, 0, |
| NAND_SFCMD_CMDXS, |
| NAND_SFCMD_ASYNC, |
| NAND_SFCMD_REGWR); |
| data->sfexec = 1; |
| |
| data->sfstat[0] = CLEAN_DATA_32; |
| data->sfstat[1] = CLEAN_DATA_32; |
| data->sfstat[2] = CLEAN_DATA_32; |
| data->sfstat[3] = CLEAN_DATA_32; |
| data->sfstat[4] = CLEAN_DATA_32; |
| data->sfstat[5] = CLEAN_DATA_32; |
| data->sfstat[6] = CLEAN_DATA_32; |
| data->sfstat[7] = CLEAN_DATA_32; |
| data->sfstat[8] = CLEAN_DATA_32; |
| data->addr0 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr1 = (ONENAND_START_ADDRESS_8 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->addr2 = (ONENAND_START_BUFFER << 16) | |
| (ONENAND_START_ADDRESS_2); |
| data->addr3 = (ONENAND_ECC_STATUS << 16) | |
| (ONENAND_COMMAND); |
| data->addr4 = (ONENAND_CONTROLLER_STATUS << 16) | |
| (ONENAND_INTERRUPT_STATUS); |
| data->addr5 = (ONENAND_INTERRUPT_STATUS << 16) | |
| (ONENAND_SYSTEM_CONFIG_1); |
| data->addr6 = (ONENAND_START_ADDRESS_3 << 16) | |
| (ONENAND_START_ADDRESS_1); |
| data->data0 = (ONENAND_CLRINTR << 16) | |
| (onenand_sysconfig1); |
| data->data1 = (onenand_startaddr8 << 16) | |
| (onenand_startaddr1); |
| data->data2 = (onenand_startbuffer << 16) | |
| (onenand_startaddr2); |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDPROGSPARE); |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDPROGSPARE); |
| data->data4 = (CLEAN_DATA_16 << 16) | |
| (CLEAN_DATA_16); |
| data->data5 = (ONENAND_CLRINTR << 16) | |
| (ONENAND_SYSCFG1_ECCENA); |
| data->data6 = (ONENAND_STARTADDR3_RES << 16) | |
| (ONENAND_STARTADDR1_RES); |
| data->macro[0] = 0x0200; |
| data->macro[1] = 0x0300; |
| data->macro[2] = 0x0400; |
| data->macro[3] = 0x0500; |
| data->macro[4] = 0x8010; |
| |
| |
| /*************************************************************/ |
| /* Write the data ram area in the onenand buffer ram */ |
| /*************************************************************/ |
| |
| /* Enable and configure the SFlash controller */ |
| cmd->cmd = 0 | CMD_OCB; |
| cmd->src = paddr(&data->sfbcfg); |
| cmd->dst = NAND_SFLASHC_BURST_CFG; |
| cmd->len = 4; |
| cmd++; |
| |
| if (addr) { |
| data->data3 = (CLEAN_DATA_16 << 16) | |
| (ONENAND_CMDPROG); |
| |
| for (i = 0; i < 4; i++) { |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[i]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Trnsfr usr buf contents to nand ctlr buf */ |
| cmd->cmd = 0; |
| cmd->src = paddr(addr_curr); |
| cmd->dst = NAND_FLASH_BUFFER; |
| cmd->len = 512; |
| if(!raw_mode) |
| addr_curr += 512; |
| cmd++; |
| |
| /* Write the MACRO1 register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->macro[i]); |
| cmd->dst = NAND_MACRO1_REG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data rdy, & read status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[i]); |
| cmd->len = 4; |
| cmd++; |
| |
| } |
| } |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[4]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| if (spareaddr) |
| { |
| // Auto mode |
| for (i = 0, k = 0; i < 8; i++) { |
| for (j = 0; j < oobfree_length[i]; j++) { |
| flash_oob[j+oobfree_offset[i]] = spareaddr[k]; |
| k++; |
| } |
| } |
| |
| cmd->cmd = 0; |
| cmd->src = paddr(&flash_oob); |
| cmd->dst = NAND_FLASH_BUFFER; |
| cmd->len = 64; |
| cmd++; |
| } |
| |
| if (raw_mode){ |
| cmd->cmd = 0; |
| cmd->src = paddr(addr_curr); |
| cmd->dst = NAND_FLASH_BUFFER; |
| cmd->len = 64; |
| cmd++; |
| } |
| |
| /* Write the MACRO1 register */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->macro[4]); |
| cmd->dst = NAND_MACRO1_REG; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[4]); |
| cmd->len = 4; |
| cmd++; |
| |
| /*************************************************************/ |
| /* Write necessary address registers in the onenand device */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[5]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the ADDR0 and ADDR1 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr0); |
| cmd->dst = NAND_ADDR0; |
| cmd->len = 8; |
| cmd++; |
| |
| /* Write the ADDR2 ADDR3 ADDR4 ADDR5 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr2); |
| cmd->dst = NAND_ADDR2; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the ADDR6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->addr6); |
| cmd->dst = NAND_ADDR6; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Write the GENP0, GENP1, GENP2, GENP3 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data0); |
| cmd->dst = NAND_GENP_REG0; |
| cmd->len = 16; |
| cmd++; |
| |
| /* Write the FLASH_DEV_CMD4,5,6 registers */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->data4); |
| cmd->dst = NAND_DEV_CMD4; |
| cmd->len = 12; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[5]); |
| cmd->len = 4; |
| cmd++; |
| |
| /*************************************************************/ |
| /* Wait for the interrupt from the Onenand device controller */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[6]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[6]); |
| cmd->len = 4; |
| cmd++; |
| |
| /*************************************************************/ |
| /* Read necessary status registers from the onenand device */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[7]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[7]); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the GENP3 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_GENP_REG3; |
| cmd->dst = paddr(&data->data3); |
| cmd->len = 4; |
| cmd++; |
| |
| /* Read the DEVCMD4 register */ |
| cmd->cmd = 0; |
| cmd->src = NAND_DEV_CMD4; |
| cmd->dst = paddr(&data->data4); |
| cmd->len = 4; |
| cmd++; |
| |
| |
| /*************************************************************/ |
| /* Restore the necessary registers to proper values */ |
| /*************************************************************/ |
| |
| /* Block on cmd ready and write CMD register */ |
| cmd->cmd = DST_CRCI_NAND_CMD; |
| cmd->src = paddr(&data->sfcmd[8]); |
| cmd->dst = NAND_SFLASHC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Kick the execute command */ |
| cmd->cmd = 0; |
| cmd->src = paddr(&data->sfexec); |
| cmd->dst = NAND_SFLASHC_EXEC_CMD; |
| cmd->len = 4; |
| cmd++; |
| |
| /* Block on data ready, and read the status register */ |
| cmd->cmd = SRC_CRCI_NAND_DATA | CMD_OCU | CMD_LC; |
| cmd->src = NAND_SFLASHC_STATUS; |
| cmd->dst = paddr(&data->sfstat[8]); |
| cmd->len = 4; |
| cmd++; |
| |
| |
| ptr[0] = (paddr(cmdlist) >> 3) | CMD_PTR_LP; |
| |
| dmov_exec_cmdptr(DMOV_NAND_CHAN, ptr); |
| |
| ecc_status = (data->data3 >> 16) & 0x0000FFFF; |
| interrupt_status = (data->data4 >> 0)&0x0000FFFF; |
| controller_status = (data->data4 >> 16)&0x0000FFFF; |
| |
| #if VERBOSE |
| dprintf(INFO, "\n%s: sflash status %x %x %x %x %x %x %x %x %x\n", __func__, |
| data->sfstat[0], |
| data->sfstat[1], |
| data->sfstat[2], |
| data->sfstat[3], |
| data->sfstat[4], |
| data->sfstat[5], |
| data->sfstat[6], |
| data->sfstat[7], |
| data->sfstat[8]); |
| |
| dprintf(INFO, "%s: controller_status = %x\n", __func__, |
| controller_status); |
| dprintf(INFO, "%s: interrupt_status = %x\n", __func__, |
| interrupt_status); |
| dprintf(INFO, "%s: ecc_status = %x\n", __func__, |
| ecc_status); |
| #endif |
| /* Check for errors, protection violations etc */ |
| if ((controller_status != 0) |
| || (data->sfstat[5] & 0x110) |
| || (data->sfstat[6] & 0x110) |
| || (data->sfstat[7] & 0x110) |
| || (data->sfstat[8] & 0x110) |
| || ((data->sfstat[0] & 0x110) && |
| (addr)) |
| || ((data->sfstat[1] & 0x110) && |
| (addr)) |
| || ((data->sfstat[2] & 0x110) && |
| (addr)) |
| || ((data->sfstat[3] & 0x110) && |
| (addr))) { |
| dprintf(CRITICAL, "%s: ECC/MPU/OP error\n", __func__); |
| return -1; |
| } |
| |
| |
| return 0; |
| } |
| |
| static int flash_onenand_mark_badblock(dmov_s *cmdlist, unsigned *ptrlist, unsigned page) |
| { |
| memset(empty_buf,0,528); |
| /* Going to first page of the block */ |
| if(page & 63) |
| page = page - (page & 63); |
| return _flash_onenand_write_page(cmdlist, ptrlist, page, empty_buf, 0, 1); |
| } |
| |
| static int flash_mark_badblock(dmov_s *cmdlist, unsigned *ptrlist, unsigned page) |
| { |
| switch(flash_info.type) { |
| case FLASH_8BIT_NAND_DEVICE: |
| case FLASH_16BIT_NAND_DEVICE: |
| return flash_nand_mark_badblock(cmdlist, ptrlist, page); |
| case FLASH_ONENAND_DEVICE: |
| return flash_onenand_mark_badblock(cmdlist, ptrlist, page); |
| default: |
| return -1; |
| } |
| } |
| |
| |
| /* Wrapper functions */ |
| static void flash_read_id(dmov_s *cmdlist, unsigned *ptrlist) |
| { |
| int dev_found = 0; |
| unsigned index; |
| |
| // Try to read id |
| flash_nand_read_id(cmdlist, ptrlist); |
| // Check if we support the device |
| for (index=1; |
| index < (sizeof(supported_flash)/sizeof(struct flash_identification)); |
| index++) |
| { |
| if ((flash_info.id & supported_flash[index].mask) == |
| (supported_flash[index].flash_id & |
| (supported_flash[index].mask))) { |
| dev_found = 1; |
| break; |
| } |
| } |
| |
| if(!dev_found) { |
| flash_onenand_read_id(cmdlist, ptrlist); |
| for (index=1; |
| index < (sizeof(supported_flash)/sizeof(struct flash_identification)); |
| index++) |
| { |
| if ((flash_info.id & supported_flash[index].mask) == |
| (supported_flash[index].flash_id & |
| (supported_flash[index].mask))) { |
| dev_found = 1; |
| break; |
| } |
| } |
| } |
| |
| |
| |
| if(dev_found) { |
| if (supported_flash[index].widebus) |
| flash_info.type = FLASH_16BIT_NAND_DEVICE; |
| else |
| flash_info.type = FLASH_8BIT_NAND_DEVICE; |
| if (supported_flash[index].onenand) |
| flash_info.type = FLASH_ONENAND_DEVICE; |
| flash_info.page_size = supported_flash[index].pagesize; |
| flash_pagesize = flash_info.page_size; |
| flash_info.block_size = supported_flash[index].blksize; |
| flash_info.spare_size = supported_flash[index].oobsize; |
| if (flash_info.block_size && flash_info.page_size) |
| { |
| flash_info.num_blocks = supported_flash[index].density; |
| flash_info.num_blocks /= (flash_info.block_size); |
| } |
| else |
| { |
| flash_info.num_blocks = 0; |
| } |
| ASSERT(flash_info.num_blocks); |
| return; |
| } |
| |
| // Assume 8 bit nand device for backward compatability |
| if (dev_found == 0) { |
| dprintf(INFO, "Device not supported. Assuming 8 bit NAND device\n"); |
| flash_info.type = FLASH_8BIT_NAND_DEVICE; |
| } |
| dprintf(INFO, "nandid: 0x%x maker=0x%02x device=0x%02x page_size=%d\n", |
| flash_info.id, flash_info.vendor, flash_info.device, |
| flash_info.page_size); |
| dprintf(INFO, " spare_size=%d block_size=%d num_blocks=%d\n", |
| flash_info.spare_size, flash_info.block_size, |
| flash_info.num_blocks); |
| } |
| |
| static int flash_erase_block(dmov_s *cmdlist, unsigned *ptrlist, unsigned page) |
| { |
| switch(flash_info.type) { |
| case FLASH_8BIT_NAND_DEVICE: |
| case FLASH_16BIT_NAND_DEVICE: |
| return flash_nand_erase_block(cmdlist, ptrlist, page); |
| case FLASH_ONENAND_DEVICE: |
| return flash_onenand_erase_block(cmdlist, ptrlist, page); |
| default: |
| return -1; |
| } |
| } |
| |
| static int _flash_read_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, void *_addr, void *_spareaddr) |
| { |
| switch(flash_info.type) { |
| case FLASH_8BIT_NAND_DEVICE: |
| case FLASH_16BIT_NAND_DEVICE: |
| if(interleaved_mode) |
| return flash_nand_read_page_interleave(cmdlist, ptrlist, page, _addr, _spareaddr); |
| else |
| return _flash_nand_read_page(cmdlist, ptrlist, page, _addr, _spareaddr); |
| case FLASH_ONENAND_DEVICE: |
| return _flash_onenand_read_page(cmdlist, ptrlist, page, _addr, _spareaddr, 0); |
| default: |
| return -1; |
| } |
| } |
| |
| static int _flash_block_isbad(dmov_s *cmdlist, unsigned *ptrlist, unsigned page) |
| { |
| switch(flash_info.type) { |
| case FLASH_8BIT_NAND_DEVICE: |
| case FLASH_16BIT_NAND_DEVICE: |
| return flash_nand_block_isbad(cmdlist, ptrlist, page); |
| case FLASH_ONENAND_DEVICE: |
| return flash_onenand_block_isbad(cmdlist, ptrlist, page); |
| default: |
| return -1; |
| } |
| } |
| |
| static int _flash_write_page(dmov_s *cmdlist, unsigned *ptrlist, |
| unsigned page, const void *_addr, |
| const void *_spareaddr) |
| { |
| switch(flash_info.type) { |
| case FLASH_8BIT_NAND_DEVICE: |
| case FLASH_16BIT_NAND_DEVICE: |
| if(interleaved_mode) |
| return flash_nand_write_page_interleave(cmdlist, ptrlist, page, _addr, _spareaddr, 0); |
| else |
| return _flash_nand_write_page(cmdlist, ptrlist, page, _addr, _spareaddr, 0); |
| case FLASH_ONENAND_DEVICE: |
| return _flash_onenand_write_page(cmdlist, ptrlist, page, _addr, _spareaddr, 0); |
| default: |
| return -1; |
| } |
| } |
| |
| static unsigned *flash_ptrlist; |
| static dmov_s *flash_cmdlist; |
| |
| static struct ptable *flash_ptable = NULL; |
| |
| void flash_init(void) |
| { |
| ASSERT(flash_ptable == NULL); |
| |
| flash_ptrlist = memalign(32, 1024); |
| flash_cmdlist = memalign(32, 1024); |
| flash_data = memalign(32, 4096 + 128); |
| flash_spare = memalign(32, 128); |
| |
| flash_read_id(flash_cmdlist, flash_ptrlist); |
| if((FLASH_8BIT_NAND_DEVICE == flash_info.type) |
| ||(FLASH_16BIT_NAND_DEVICE == flash_info.type)) { |
| if(flash_nand_read_config(flash_cmdlist, flash_ptrlist)) { |
| dprintf(CRITICAL, "ERROR: could not read CFG0/CFG1 state\n"); |
| ASSERT(0); |
| } |
| } |
| } |
| |
| struct ptable *flash_get_ptable(void) |
| { |
| return flash_ptable; |
| } |
| |
| void flash_set_ptable(struct ptable *new_ptable) |
| { |
| ASSERT(flash_ptable == NULL && new_ptable != NULL); |
| flash_ptable = new_ptable; |
| } |
| |
| struct flash_info *flash_get_info(void) |
| { |
| return &flash_info; |
| } |
| |
| int flash_erase(struct ptentry *ptn) |
| { |
| unsigned block = ptn->start; |
| unsigned count = ptn->length; |
| |
| set_nand_configuration(ptn->type); |
| while(count-- > 0) { |
| if(flash_erase_block(flash_cmdlist, flash_ptrlist, block * 64)) { |
| dprintf(INFO, "cannot erase @ %d (bad block?)\n", block); |
| } |
| block++; |
| } |
| return 0; |
| } |
| |
| int flash_read_ext(struct ptentry *ptn, unsigned extra_per_page, |
| unsigned offset, void *data, unsigned bytes) |
| { |
| unsigned page = (ptn->start * 64) + (offset / flash_pagesize); |
| unsigned lastpage = (ptn->start + ptn->length) * 64; |
| unsigned count = (bytes + flash_pagesize - 1 + extra_per_page) / (flash_pagesize + extra_per_page); |
| unsigned *spare = (unsigned*) flash_spare; |
| unsigned errors = 0; |
| unsigned char *image = data; |
| unsigned current_block = (page - (page & 63)) >> 6; |
| unsigned start_block = ptn->start; |
| int result = 0; |
| int isbad = 0; |
| int start_block_count = 0; |
| |
| ASSERT(ptn->type == TYPE_APPS_PARTITION); |
| set_nand_configuration(TYPE_APPS_PARTITION); |
| |
| if(offset & (flash_pagesize - 1)) |
| return -1; |
| |
| // Adjust page offset based on number of bad blocks from start to current page |
| if (start_block < current_block) |
| { |
| start_block_count = (current_block - start_block); |
| while (start_block_count && (start_block < (ptn->start + ptn->length))) { |
| isbad = _flash_block_isbad(flash_cmdlist, flash_ptrlist, start_block*64); |
| if (isbad) |
| page += 64; |
| else |
| start_block_count--; |
| start_block++; |
| } |
| } |
| |
| while((page < lastpage) && !start_block_count) { |
| if(count == 0) { |
| dprintf(INFO, "flash_read_image: success (%d errors)\n", errors); |
| return 0; |
| } |
| |
| result = _flash_read_page(flash_cmdlist, flash_ptrlist, page, image, spare); |
| |
| if (result == -1) { |
| // bad page, go to next page |
| page++; |
| errors++; |
| continue; |
| } |
| else if (result == -2) { |
| // bad block, go to next block same offset |
| page += 64; |
| errors++; |
| continue; |
| } |
| |
| page++; |
| image += flash_pagesize; |
| memcpy(image, spare, extra_per_page); |
| image += extra_per_page; |
| count -= 1; |
| } |
| |
| /* could not find enough valid pages before we hit the end */ |
| dprintf(INFO, "flash_read_image: failed (%d errors)\n", errors); |
| return 0xffffffff; |
| } |
| |
| int flash_write(struct ptentry *ptn, unsigned extra_per_page, const void *data, |
| unsigned bytes) |
| { |
| unsigned page = ptn->start * 64; |
| unsigned lastpage = (ptn->start + ptn->length) * 64; |
| unsigned *spare = (unsigned*) flash_spare; |
| const unsigned char *image = data; |
| unsigned wsize = flash_pagesize + extra_per_page; |
| unsigned n; |
| int r; |
| |
| if ((flash_info.type == FLASH_ONENAND_DEVICE) && (ptn->type == TYPE_MODEM_PARTITION)) |
| { |
| dprintf(CRITICAL, "flash_write_image: feature not supported\n"); |
| return -1; |
| } |
| |
| set_nand_configuration(ptn->type); |
| for(n = 0; n < 16; n++) spare[n] = 0xffffffff; |
| |
| while(bytes > 0) { |
| if(bytes < wsize) { |
| dprintf(CRITICAL, "flash_write_image: image undersized (%d < %d)\n", bytes, wsize); |
| return -1; |
| } |
| if(page >= lastpage) { |
| dprintf(CRITICAL, "flash_write_image: out of space\n"); |
| return -1; |
| } |
| |
| if((page & 63) == 0) { |
| if(flash_erase_block(flash_cmdlist, flash_ptrlist, page)) { |
| dprintf(INFO, "flash_write_image: bad block @ %d\n", page >> 6); |
| page += 64; |
| continue; |
| } |
| } |
| |
| if(extra_per_page) { |
| r = _flash_write_page(flash_cmdlist, flash_ptrlist, page, image, image + flash_pagesize); |
| } else { |
| r = _flash_write_page(flash_cmdlist, flash_ptrlist, page, image, spare); |
| } |
| if(r) { |
| dprintf(INFO, "flash_write_image: write failure @ page %d (src %d)\n", page, image - (const unsigned char *)data); |
| image -= (page & 63) * wsize; |
| bytes += (page & 63) * wsize; |
| page &= ~63; |
| if(flash_erase_block(flash_cmdlist, flash_ptrlist, page)) { |
| dprintf(INFO, "flash_write_image: erase failure @ page %d\n", page); |
| } |
| if (ptn->type != TYPE_MODEM_PARTITION) { |
| flash_mark_badblock(flash_cmdlist, flash_ptrlist, page); |
| } |
| dprintf(INFO, "flash_write_image: restart write @ page %d (src %d)\n", page, image - (const unsigned char *)data); |
| page += 64; |
| continue; |
| } |
| page++; |
| image += wsize; |
| bytes -= wsize; |
| } |
| |
| /* erase any remaining pages in the partition */ |
| page = (page + 63) & (~63); |
| while(page < lastpage){ |
| if(flash_erase_block(flash_cmdlist, flash_ptrlist, page)) { |
| dprintf(INFO, "flash_write_image: bad block @ %d\n", page >> 6); |
| } |
| page += 64; |
| } |
| |
| dprintf(INFO, "flash_write_image: success\n"); |
| return 0; |
| } |
| |
| #if 0 |
| static int flash_read_page(unsigned page, void *data, void *extra) |
| { |
| return _flash_read_page(flash_cmdlist, flash_ptrlist, |
| page, data, extra); |
| } |
| #endif |
| |
| unsigned flash_page_size(void) |
| { |
| return flash_pagesize; |
| } |
| |
| void enable_interleave_mode(int status) |
| { |
| interleaved_mode = status; |
| if(status) |
| { |
| flash_pagesize *= 2; |
| platform_config_interleaved_mode_gpios(); |
| } |
| return; |
| } |