mpq8092: Add Initial platform support for MPQ8092
Initial platform changes needed for the MPQ8092 bringup.
Change-Id: Id62093e1e92c60601cd534807ed14bfe8bf0b1ca
diff --git a/platform/mpq8092/acpuclock.c b/platform/mpq8092/acpuclock.c
new file mode 100644
index 0000000..2adfacb
--- /dev/null
+++ b/platform/mpq8092/acpuclock.c
@@ -0,0 +1,98 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <err.h>
+#include <assert.h>
+#include <debug.h>
+#include <reg.h>
+#include <platform/timer.h>
+#include <platform/iomap.h>
+#include <mmc.h>
+#include <clock.h>
+#include <platform/clock.h>
+
+void hsusb_clock_init(void)
+{
+
+}
+
+void clock_init_mmc(uint32_t interface)
+{
+
+}
+
+/* Configure MMC clock */
+void clock_config_mmc(uint32_t interface, uint32_t freq)
+{
+ uint32_t reg;
+
+ reg = 0;
+ reg |= MMC_BOOT_MCI_CLK_ENABLE;
+ reg |= MMC_BOOT_MCI_CLK_ENA_FLOW;
+ reg |= MMC_BOOT_MCI_CLK_IN_FEEDBACK;
+ writel(reg, MMC_BOOT_MCI_CLK);
+}
+
+/* Configure UART clock based on the UART block id*/
+void clock_config_uart_dm(uint8_t id)
+{
+
+}
+
+/* Function to asynchronously reset CE.
+ * Function assumes that all the CE clocks are off.
+ */
+static void ce_async_reset(uint8_t instance)
+{
+
+}
+
+static void clock_ce_enable(uint8_t instance)
+{
+
+}
+
+static void clock_ce_disable(uint8_t instance)
+{
+
+}
+
+void clock_config_ce(uint8_t instance)
+{
+ /* Need to enable the clock before disabling since the clk_disable()
+ * has a check to default to nop when the clk_enable() is not called
+ * on that particular clock.
+ */
+ clock_ce_enable(instance);
+
+ clock_ce_disable(instance);
+
+ ce_async_reset(instance);
+
+ clock_ce_enable(instance);
+}
diff --git a/platform/mpq8092/gpio.c b/platform/mpq8092/gpio.c
new file mode 100644
index 0000000..6f0c834
--- /dev/null
+++ b/platform/mpq8092/gpio.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <reg.h>
+#include <platform/iomap.h>
+#include <platform/gpio.h>
+
+void gpio_tlmm_config(uint32_t gpio, uint8_t func,
+ uint8_t dir, uint8_t pull,
+ uint8_t drvstr, uint32_t enable)
+{
+ uint32_t val = 0;
+ val |= pull;
+ val |= func << 2;
+ val |= drvstr << 6;
+ val |= enable << 9;
+ writel(val, (uint32_t *)GPIO_CONFIG_ADDR(gpio));
+ return;
+}
+
+void gpio_set(uint32_t gpio, uint32_t dir)
+{
+ writel(dir, (uint32_t *)GPIO_IN_OUT_ADDR(gpio));
+ return;
+}
+
+/* Configure gpio for blsp uart 2 */
+void gpio_config_uart_dm(uint8_t id)
+{
+ /* configure rx gpio */
+ gpio_tlmm_config(5, 2, GPIO_INPUT, GPIO_NO_PULL,
+ GPIO_8MA, GPIO_DISABLE);
+
+ /* configure tx gpio */
+ gpio_tlmm_config(4, 2, GPIO_OUTPUT, GPIO_NO_PULL,
+ GPIO_8MA, GPIO_DISABLE);
+}
diff --git a/platform/mpq8092/include/platform/clock.h b/platform/mpq8092/include/platform/clock.h
new file mode 100644
index 0000000..2113d4b
--- /dev/null
+++ b/platform/mpq8092/include/platform/clock.h
@@ -0,0 +1,45 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __MPQ8092_CLOCK_H
+#define __MPQ8092_CLOCK_H
+
+#include <clock.h>
+#include <clock_lib2.h>
+
+#define UART_DM_CLK_RX_TX_BIT_RATE 0xCC
+
+void platform_clock_init(void);
+
+void clock_init_mmc(uint32_t interface);
+void clock_config_mmc(uint32_t interface, uint32_t freq);
+void clock_config_uart_dm(uint8_t id);
+void hsusb_clock_init(void);
+void clock_config_ce(uint8_t instance);
+
+#endif
diff --git a/platform/mpq8092/include/platform/gpio.h b/platform/mpq8092/include/platform/gpio.h
new file mode 100644
index 0000000..4c6e24e
--- /dev/null
+++ b/platform/mpq8092/include/platform/gpio.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __PLATFORM_MPQ8092_GPIO_H
+#define __PLATFORM_MPQ8092_GPIO_H
+
+/* GPIO TLMM: Direction */
+#define GPIO_INPUT 0
+#define GPIO_OUTPUT 1
+
+/* GPIO TLMM: Pullup/Pulldown */
+#define GPIO_NO_PULL 0
+#define GPIO_PULL_DOWN 1
+#define GPIO_KEEPER 2
+#define GPIO_PULL_UP 3
+
+/* GPIO TLMM: Drive Strength */
+#define GPIO_2MA 0
+#define GPIO_4MA 1
+#define GPIO_6MA 2
+#define GPIO_8MA 3
+#define GPIO_10MA 4
+#define GPIO_12MA 5
+#define GPIO_14MA 6
+#define GPIO_16MA 7
+
+/* GPIO TLMM: Status */
+#define GPIO_ENABLE 0
+#define GPIO_DISABLE 1
+
+void gpio_config_uart_dm(uint8_t id);
+
+#endif
diff --git a/platform/mpq8092/include/platform/iomap.h b/platform/mpq8092/include/platform/iomap.h
new file mode 100644
index 0000000..ba10f13
--- /dev/null
+++ b/platform/mpq8092/include/platform/iomap.h
@@ -0,0 +1,130 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _PLATFORM_MSM8092_IOMAP_H_
+#define _PLATFORM_MSM8092_IOMAP_H_
+
+#define MSM_IOMAP_BASE 0xF9000000
+#define MSM_IOMAP_END 0xFEFFFFFF
+
+#define SDRAM_START_ADDR 0x00000000
+
+#define MSM_SHARED_BASE 0x0FA00000
+
+#define APPS_SS_BASE 0xF9000000
+
+#define MSM_GIC_DIST_BASE APPS_SS_BASE
+#define MSM_GIC_CPU_BASE (APPS_SS_BASE + 0x2000)
+#define APPS_APCS_QTMR_AC_BASE (APPS_SS_BASE + 0x00020000)
+#define APPS_APCS_F0_QTMR_V1_BASE (APPS_SS_BASE + 0x00021000)
+#define QTMR_BASE APPS_APCS_F0_QTMR_V1_BASE
+
+#define PERIPH_SS_BASE 0xF9800000
+
+#define MSM_SDC1_BAM_BASE (PERIPH_SS_BASE + 0x00004000)
+#define MSM_SDC1_BASE (PERIPH_SS_BASE + 0x00024000)
+#define MSM_SDC1_DML_BASE (PERIPH_SS_BASE + 0x00024800)
+#define MSM_SDC3_BAM_BASE (PERIPH_SS_BASE + 0x00044000)
+#define MSM_SDC3_BASE (PERIPH_SS_BASE + 0x00064000)
+#define MSM_SDC3_DML_BASE (PERIPH_SS_BASE + 0x00064800)
+#define MSM_SDC2_BAM_BASE (PERIPH_SS_BASE + 0x00084000)
+#define MSM_SDC2_BASE (PERIPH_SS_BASE + 0x000A4000)
+#define MSM_SDC2_DML_BASE (PERIPH_SS_BASE + 0x000A4800)
+#define MSM_SDC4_BAM_BASE (PERIPH_SS_BASE + 0x000C4000)
+#define MSM_SDC4_BASE (PERIPH_SS_BASE + 0x000E4000)
+#define MSM_SDC4_DML_BASE (PERIPH_SS_BASE + 0x000E4800)
+
+#define BLSP1_UART0_BASE (PERIPH_SS_BASE + 0x0011D000)
+#define BLSP1_UART1_BASE (PERIPH_SS_BASE + 0x0011E000)
+#define BLSP1_UART2_BASE (PERIPH_SS_BASE + 0x0011F000)
+#define BLSP1_UART3_BASE (PERIPH_SS_BASE + 0x00120000)
+#define BLSP1_UART4_BASE (PERIPH_SS_BASE + 0x00121000)
+#define BLSP1_UART5_BASE (PERIPH_SS_BASE + 0x00122000)
+#define MSM_USB_BASE (PERIPH_SS_BASE + 0x00255000)
+
+#define CLK_CTL_BASE 0xFC400000
+
+#define GCC_WDOG_DEBUG (CLK_CTL_BASE + 0x00001780)
+
+#define USB_HS_BCR (CLK_CTL_BASE + 0x480)
+#define USB_BOOT_CLOCK_CTL (CLK_CTL_BASE + 0x1A00)
+
+#define SPMI_BASE 0xFC4C0000
+#define SPMI_GENI_BASE (SPMI_BASE + 0xA000)
+#define SPMI_PIC_BASE (SPMI_BASE + 0xB000)
+
+#define MSM_CE1_BAM_BASE 0xFD404000
+#define MSM_CE1_BASE 0xFD41A000
+
+#define TLMM_BASE_ADDR 0xFD510000
+#define GPIO_CONFIG_ADDR(x) (TLMM_BASE_ADDR + 0x1000 + (x)*0x10)
+#define GPIO_IN_OUT_ADDR(x) (TLMM_BASE_ADDR + 0x1004 + (x)*0x10)
+
+#define MPM2_MPM_CTRL_BASE 0xFC4A1000
+#define MPM2_MPM_PS_HOLD 0xFC4AB000
+
+/* CE 2 */
+#define GCC_CE2_BCR (CLK_CTL_BASE + 0x1080)
+#define GCC_CE2_CMD_RCGR (CLK_CTL_BASE + 0x1090)
+#define GCC_CE2_CFG_RCGR (CLK_CTL_BASE + 0x1094)
+#define GCC_CE2_CBCR (CLK_CTL_BASE + 0x1084)
+#define GCC_CE2_AXI_CBCR (CLK_CTL_BASE + 0x1088)
+#define GCC_CE2_AHB_CBCR (CLK_CTL_BASE + 0x108C)
+
+/* GPLL */
+#define GPLL0_STATUS (CLK_CTL_BASE + 0x001C)
+#define APCS_GPLL_ENA_VOTE (CLK_CTL_BASE + 0x1480)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (CLK_CTL_BASE + 0x1484)
+
+/* SDCC */
+#define SDCC1_BCR (CLK_CTL_BASE + 0x4C0) /* block reset */
+#define SDCC1_APPS_CBCR (CLK_CTL_BASE + 0x4C4) /* branch control */
+#define SDCC1_AHB_CBCR (CLK_CTL_BASE + 0x4C8)
+#define SDCC1_INACTIVITY_TIMER_CBCR (CLK_CTL_BASE + 0x4CC)
+#define SDCC1_CMD_RCGR (CLK_CTL_BASE + 0x4D0) /* cmd */
+#define SDCC1_CFG_RCGR (CLK_CTL_BASE + 0x4D4) /* cfg */
+#define SDCC1_M (CLK_CTL_BASE + 0x4D8) /* m */
+#define SDCC1_N (CLK_CTL_BASE + 0x4DC) /* n */
+#define SDCC1_D (CLK_CTL_BASE + 0x4E0) /* d */
+
+/* UART */
+#define BLSP1_AHB_CBCR (CLK_CTL_BASE + 0x5C4)
+#define BLSP1_UART2_APPS_CBCR (CLK_CTL_BASE + 0x704)
+#define BLSP1_UART2_APPS_CMD_RCGR (CLK_CTL_BASE + 0x70C)
+#define BLSP1_UART2_APPS_CFG_RCGR (CLK_CTL_BASE + 0x710)
+#define BLSP1_UART2_APPS_M (CLK_CTL_BASE + 0x714)
+#define BLSP1_UART2_APPS_N (CLK_CTL_BASE + 0x718)
+#define BLSP1_UART2_APPS_D (CLK_CTL_BASE + 0x71C)
+
+/* USB */
+#define USB_HS_SYSTEM_CBCR (CLK_CTL_BASE + 0x484)
+#define USB_HS_AHB_CBCR (CLK_CTL_BASE + 0x488)
+#define USB_HS_SYSTEM_CMD_RCGR (CLK_CTL_BASE + 0x490)
+#define USB_HS_SYSTEM_CFG_RCGR (CLK_CTL_BASE + 0x494)
+
+#endif
diff --git a/platform/mpq8092/include/platform/irqs.h b/platform/mpq8092/include/platform/irqs.h
new file mode 100644
index 0000000..33430cb
--- /dev/null
+++ b/platform/mpq8092/include/platform/irqs.h
@@ -0,0 +1,61 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __IRQS_MPQ8092_H
+#define __IRQS_MPQ8092_H
+
+/* MSM ACPU Interrupt Numbers */
+
+/* 0-15: STI/SGI (software triggered/generated interrupts)
+ * 16-31: PPI (private peripheral interrupts)
+ * 32+: SPI (shared peripheral interrupts)
+ */
+
+#define GIC_PPI_START 16
+#define GIC_SPI_START 32
+
+#define INT_QTMR_NON_SECURE_PHY_TIMER_EXP (GIC_PPI_START + 3)
+#define INT_QTMR_VIRTUAL_TIMER_EXP (GIC_PPI_START + 4)
+
+#define INT_QTMR_FRM_0_PHYSICAL_TIMER_EXP (GIC_SPI_START + 8)
+
+#define USB1_HS_BAM_IRQ (GIC_SPI_START + 135)
+#define USB1_HS_IRQ (GIC_SPI_START + 134)
+
+/* Retrofit universal macro names */
+#define INT_USB_HS USB1_HS_IRQ
+
+#define EE0_KRAIT_HLOS_SPMI_PERIPH_IRQ (GIC_SPI_START + 190)
+
+#define NR_MSM_IRQS 256
+#define NR_GPIO_IRQS 173
+#define NR_BOARD_IRQS 0
+
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + \
+ NR_BOARD_IRQS)
+#endif /* __IRQS_MPQ8092_H */
diff --git a/platform/mpq8092/platform.c b/platform/mpq8092/platform.c
new file mode 100644
index 0000000..5509d78
--- /dev/null
+++ b/platform/mpq8092/platform.c
@@ -0,0 +1,49 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <reg.h>
+#include <platform/iomap.h>
+#include <qgic.h>
+#include <qtimer.h>
+
+void platform_early_init(void)
+{
+ qgic_init();
+ qtimer_init();
+}
+
+void platform_init(void)
+{
+ dprintf(INFO, "platform_init()\n");
+}
+
+void platform_uninit(void)
+{
+ qtimer_uninit();
+}
diff --git a/platform/mpq8092/rules.mk b/platform/mpq8092/rules.mk
new file mode 100644
index 0000000..11faf01
--- /dev/null
+++ b/platform/mpq8092/rules.mk
@@ -0,0 +1,25 @@
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+ARCH := arm
+#Compiling this as cortex-a8 until the compiler supports krait
+ARM_CPU := cortex-a8
+CPU := generic
+
+DEFINES += ARM_CPU_CORE_KRAIT
+
+MMC_SLOT := 1
+
+DEFINES += PERIPH_BLK_BLSP=1
+DEFINES += WITH_CPU_EARLY_INIT=0 WITH_CPU_WARM_BOOT=0 \
+ MMC_SLOT=$(MMC_SLOT)
+
+INCLUDES += -I$(LOCAL_DIR)/include -I$(LK_TOP_DIR)/platform/msm_shared/include
+
+OBJS += \
+ $(LOCAL_DIR)/platform.o \
+ $(LOCAL_DIR)/acpuclock.o \
+ $(LOCAL_DIR)/gpio.o
+
+LINKER_SCRIPT += $(BUILDDIR)/system-onesegment.ld
+
+include platform/msm_shared/rules.mk