[project/target]: Add 3 new projects and the corresponding make files.
Add msm7627_surf, msm7630_surf and qsd8250_surf projects and their corresponding
target files.
Signed-off-by: Chandan Uddaraju <chandanu@quicinc.com>
diff --git a/project/msm7627_surf.mk b/project/msm7627_surf.mk
new file mode 100755
index 0000000..59f98ed
--- /dev/null
+++ b/project/msm7627_surf.mk
@@ -0,0 +1,11 @@
+# top level project rules for the msm7627_surf project
+#
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+TARGET := msm7627_surf
+
+MODULES += app/aboot
+
+#DEFINES += WITH_DEBUG_DCC=1
+#DEFINES += WITH_DEBUG_UART=1
+#DEFINES += WITH_DEBUG_FBCON=1
\ No newline at end of file
diff --git a/project/msm7630_surf.mk b/project/msm7630_surf.mk
new file mode 100755
index 0000000..70b89d6
--- /dev/null
+++ b/project/msm7630_surf.mk
@@ -0,0 +1,11 @@
+# top level project rules for the msm7630_surf project
+#
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+TARGET := msm7630_surf
+
+MODULES += app/aboot
+
+#DEFINES += WITH_DEBUG_DCC=1
+#DEFINES += WITH_DEBUG_UART=1
+#DEFINES += WITH_DEBUG_FBCON=1
\ No newline at end of file
diff --git a/project/qsd8250_surf.mk b/project/qsd8250_surf.mk
new file mode 100755
index 0000000..3b680d1
--- /dev/null
+++ b/project/qsd8250_surf.mk
@@ -0,0 +1,11 @@
+# top level project rules for the qsd8250_surf project
+#
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+TARGET := qsd8250_surf
+
+MODULES += app/aboot
+
+#DEFINES += WITH_DEBUG_DCC=1
+#DEFINES += WITH_DEBUG_UART=1
+#DEFINES += WITH_DEBUG_FBCON=1
diff --git a/target/msm7627_surf/init.c b/target/msm7627_surf/init.c
new file mode 100644
index 0000000..16991ce
--- /dev/null
+++ b/target/msm7627_surf/init.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+#include <lib/ptable.h>
+#include <dev/flash.h>
+
+static struct ptable flash_ptable;
+
+/* for these partitions, start will be offset by either what we get from
+ * smem, or from the above offset if smem is not useful. Also, we should
+ * probably have smem_ptable code populate our flash_ptable.
+ *
+ * When smem provides us with a full partition table, we can get rid of
+ * this altogether.
+ *
+ */
+static struct ptentry board_part_list[] = {
+ {
+ .start = 0,
+ .length = 40,
+ .name = "boot",
+ },
+ {
+ .start = 56,
+ .length = 608 /* 76MB */,
+ .name = "system",
+ },
+ {
+ .start = 664,
+ .length = 608 /* 76MB */,
+ .name = "cache",
+ },
+ {
+ .start = 1272,
+ .length = 0,
+ .name = "userdata",
+ },
+};
+static int num_parts = sizeof(board_part_list)/sizeof(struct ptentry);
+
+void smem_ptable_init(void);
+unsigned smem_get_apps_flash_start(void);
+
+void keypad_init(void);
+
+void target_init(void)
+{
+ unsigned offset;
+ struct flash_info *flash_info;
+ int i;
+
+ dprintf(INFO, "target_init()\n");
+
+ keys_init();
+ keypad_init();
+
+ ptable_init(&flash_ptable);
+ smem_ptable_init();
+
+ flash_init();
+ flash_info = flash_get_info();
+ ASSERT(flash_info);
+
+ offset = smem_get_apps_flash_start();
+ if (offset == 0xffffffff)
+ while(1);
+
+ for (i = 0; i < num_parts; i++) {
+ struct ptentry *ptn = &board_part_list[i];
+ unsigned len = ptn->length;
+
+ if ((len == 0) && (i == num_parts - 1))
+ len = flash_info->num_blocks - offset - ptn->start;
+ ptable_add(&flash_ptable, ptn->name, offset + ptn->start,
+ len, ptn->flags);
+ }
+
+ ptable_dump(&flash_ptable);
+ flash_set_ptable(&flash_ptable);
+}
diff --git a/target/msm7627_surf/keypad.c b/target/msm7627_surf/keypad.c
new file mode 100644
index 0000000..f44032f
--- /dev/null
+++ b/target/msm7627_surf/keypad.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+
+#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
+
+/* don't turn this on without updating the ffa support */
+#define SCAN_FUNCTION_KEYS 0
+
+static unsigned int halibut_row_gpios[] = {
+ 31, 32, 33, 34, 35, 41
+#if SCAN_FUNCTION_KEYS
+ , 42
+#endif
+};
+
+static unsigned int halibut_col_gpios[] = { 36, 37, 38, 39, 40 };
+
+#define KEYMAP_INDEX(row, col) ((row)*ARRAY_SIZE(halibut_col_gpios) + (col))
+
+static const unsigned short halibut_keymap[ARRAY_SIZE(halibut_col_gpios) * ARRAY_SIZE(halibut_row_gpios)] = {
+ [KEYMAP_INDEX(0, 0)] = KEY_5,
+ [KEYMAP_INDEX(0, 1)] = KEY_9,
+ [KEYMAP_INDEX(0, 2)] = KEY_SOFT1,
+ [KEYMAP_INDEX(0, 3)] = KEY_6,
+ [KEYMAP_INDEX(0, 4)] = KEY_LEFT,
+
+ [KEYMAP_INDEX(1, 0)] = KEY_0,
+ [KEYMAP_INDEX(1, 1)] = KEY_RIGHT,
+ [KEYMAP_INDEX(1, 2)] = KEY_1,
+ [KEYMAP_INDEX(1, 3)] = KEY_SHARP,
+ [KEYMAP_INDEX(1, 4)] = KEY_SEND,
+
+ [KEYMAP_INDEX(2, 0)] = KEY_VOLUMEUP,
+ [KEYMAP_INDEX(2, 1)] = KEY_HOME, /* FA */
+ [KEYMAP_INDEX(2, 2)] = KEY_F8, /* QCHT */
+ [KEYMAP_INDEX(2, 3)] = KEY_F6, /* R+ */
+ [KEYMAP_INDEX(2, 4)] = KEY_F7, /* R- */
+
+ [KEYMAP_INDEX(3, 0)] = KEY_UP,
+ [KEYMAP_INDEX(3, 1)] = KEY_CLEAR,
+ [KEYMAP_INDEX(3, 2)] = KEY_4,
+ [KEYMAP_INDEX(3, 3)] = KEY_MUTE, /* SPKR */
+ [KEYMAP_INDEX(3, 4)] = KEY_2,
+
+ [KEYMAP_INDEX(4, 0)] = KEY_SOFT2, /* SOFT2 */
+ [KEYMAP_INDEX(4, 1)] = KEY_CENTER, /* KEY_CENTER */
+ [KEYMAP_INDEX(4, 2)] = KEY_DOWN,
+ [KEYMAP_INDEX(4, 3)] = KEY_BACK, /* FB */
+ [KEYMAP_INDEX(4, 4)] = KEY_8,
+
+ [KEYMAP_INDEX(5, 0)] = KEY_VOLUMEDOWN,
+ [KEYMAP_INDEX(5, 1)] = KEY_STAR, /* KEY_STAR */
+ [KEYMAP_INDEX(5, 2)] = KEY_MAIL, /* MESG */
+ [KEYMAP_INDEX(5, 3)] = KEY_3,
+ [KEYMAP_INDEX(5, 4)] = KEY_7,
+
+#if SCAN_FUNCTION_KEYS
+ [KEYMAP_INDEX(6, 0)] = KEY_F5,
+ [KEYMAP_INDEX(6, 1)] = KEY_F4,
+ [KEYMAP_INDEX(6, 2)] = KEY_F3,
+ [KEYMAP_INDEX(6, 3)] = KEY_F2,
+ [KEYMAP_INDEX(6, 4)] = KEY_F1
+#endif
+};
+
+static struct gpio_keypad_info halibut_keypad_info = {
+ .keymap = halibut_keymap,
+ .output_gpios = halibut_row_gpios,
+ .input_gpios = halibut_col_gpios,
+ .noutputs = ARRAY_SIZE(halibut_row_gpios),
+ .ninputs = ARRAY_SIZE(halibut_col_gpios),
+ .settle_time = 5 /* msec */,
+ .poll_time = 20 /* msec */,
+ .flags = GPIOKPF_DRIVE_INACTIVE,
+};
+
+void keypad_init(void)
+{
+ gpio_keypad_init(&halibut_keypad_info);
+}
diff --git a/target/msm7627_surf/panel.c b/target/msm7627_surf/panel.c
new file mode 100644
index 0000000..c2b56a1
--- /dev/null
+++ b/target/msm7627_surf/panel.c
@@ -0,0 +1,471 @@
+/* Copyright 2007, Google Inc. */
+
+#include <debug.h>
+#include <dev/gpio.h>
+#include <kernel/thread.h>
+#include <platform/mddi.h>
+
+#define MDDI_CLIENT_CORE_BASE 0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE 0x120000
+#define I2C_BLOCK_BASE 0x130000
+#define PWM_BLOCK_BASE 0x140000
+#define GPIO_BLOCK_BASE 0x150000
+#define SYSTEM_BLOCK1_BASE 0x160000
+#define SYSTEM_BLOCK2_BASE 0x170000
+
+
+#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
+#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
+#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
+#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
+#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
+#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
+#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
+#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
+#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
+#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
+#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
+#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
+#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
+#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
+#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
+#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
+#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
+#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
+#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
+#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
+#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
+#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
+
+
+#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
+#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
+#define START (LCD_CONTROL_BLOCK_BASE|0x08)
+#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
+#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
+#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
+#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
+#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
+#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
+#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
+
+#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
+#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
+#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
+#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
+#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
+#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
+#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
+#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
+#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
+#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
+#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
+#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
+#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
+#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
+#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
+#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
+#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
+#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
+#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
+
+#define MONI (LCD_CONTROL_BLOCK_BASE|0xB0)
+
+#define Current (LCD_CONTROL_BLOCK_BASE|0xC0)
+#define LCD (LCD_CONTROL_BLOCK_BASE|0xC4)
+#define COMMAND (LCD_CONTROL_BLOCK_BASE|0xC8)
+
+
+#define SSICTL (SPI_BLOCK_BASE|0x00)
+#define SSITIME (SPI_BLOCK_BASE|0x04)
+#define SSITX (SPI_BLOCK_BASE|0x08)
+#define SSIRX (SPI_BLOCK_BASE|0x0C)
+#define SSIINTC (SPI_BLOCK_BASE|0x10)
+#define SSIINTS (SPI_BLOCK_BASE|0x14)
+#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
+#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
+#define SSIID (SPI_BLOCK_BASE|0x20)
+
+
+#define I2CSETUP (I2C_BLOCK_BASE|0x00)
+#define I2CCTRL (I2C_BLOCK_BASE|0x04)
+
+
+#define TIMER0LOAD (PWM_BLOCK_BASE|0x00)
+#define TIMER0VALUE (PWM_BLOCK_BASE|0x04)
+#define TIMER0CONTROL (PWM_BLOCK_BASE|0x08)
+#define TIMER0INTCLR (PWM_BLOCK_BASE|0x0C)
+#define TIMER0RIS (PWM_BLOCK_BASE|0x10)
+#define TIMER0MIS (PWM_BLOCK_BASE|0x14)
+#define TIMER0BGLOAD (PWM_BLOCK_BASE|0x18)
+#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
+#define TIMER1LOAD (PWM_BLOCK_BASE|0x20)
+#define TIMER1VALUE (PWM_BLOCK_BASE|0x24)
+#define TIMER1CONTROL (PWM_BLOCK_BASE|0x28)
+#define TIMER1INTCLR (PWM_BLOCK_BASE|0x2C)
+#define TIMER1RIS (PWM_BLOCK_BASE|0x30)
+#define TIMER1MIS (PWM_BLOCK_BASE|0x34)
+#define TIMER1BGLOAD (PWM_BLOCK_BASE|0x38)
+#define PWM1OFF (PWM_BLOCK_BASE|0x3C)
+#define TIMERITCR (PWM_BLOCK_BASE|0x60)
+#define TIMERITOP (PWM_BLOCK_BASE|0x64)
+#define PWMCR (PWM_BLOCK_BASE|0x68)
+#define PWMID (PWM_BLOCK_BASE|0x6C)
+#define PWMMON (PWM_BLOCK_BASE|0x70)
+
+
+#define GPIODATA (GPIO_BLOCK_BASE|0x00)
+#define GPIODIR (GPIO_BLOCK_BASE|0x04)
+#define GPIOIS (GPIO_BLOCK_BASE|0x08)
+#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
+#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
+#define GPIOIE (GPIO_BLOCK_BASE|0x14)
+#define GPIORIS (GPIO_BLOCK_BASE|0x18)
+#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
+#define GPIOIC (GPIO_BLOCK_BASE|0x20)
+#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
+#define GPIOPC (GPIO_BLOCK_BASE|0x28)
+
+#define GPIOID (GPIO_BLOCK_BASE|0x30)
+
+
+#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
+#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
+#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
+#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
+#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
+
+struct init_table {
+ unsigned int reg;
+ unsigned int val;
+};
+
+static struct init_table toshiba_480x640_init_table[] = {
+ { DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters
+ { DPSET1, 0x00000113 }, // # MDC.DPSET1
+ { DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable
+ { DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL
+ { 0, 14 }, // wait_ms(14);
+ { SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output
+ { CLKENB, 0x000000EF }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK)
+ { GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0
+ { GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output)
+ { SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control
+ { GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut
+ { SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment
+ { GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO
+ { GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO
+ { GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear
+ { GPIO_BLOCK_BASE, 0x00060006 }, // # GPI .GPIODATA # Release LCDD reset
+ { GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply
+ { GPIO_BLOCK_BASE, 0x02000200 }, // # GPI .GPIODATA # TEST LED ON
+ { DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up
+ { TIMER0CONTROL, 0x00000060 }, // # PWM.Timer0Control # PWM0 output stop
+ { PWM_BLOCK_BASE, 0x00001388 }, // # PWM.Timer0Load # PWM0 10kHz , Duty 99 (BackLight OFF)
+ //{PWM0OFF, 0x00000001 }, // # PWM.PWM0OFF
+#if 0
+ { PWM0OFF, 0x00001387 }, // SURF 100% backlight
+ { PWM0OFF, 0x00000000 }, // FFA 100% backlight
+#endif
+ { PWM0OFF, 0x000009C3 }, // 50% BL
+ { TIMER1CONTROL, 0x00000060 }, // # PWM.Timer1Control # PWM1 output stop
+ { TIMER1LOAD, 0x00001388 }, // # PWM.Timer1Load # PWM1 10kHz , Duty 99 (BackLight OFF)
+ //{PWM1OFF, 0x00000001 }, // # PWM.PWM1OFF
+ { PWM1OFF, 0x00001387 },
+ { TIMER0CONTROL, 0x000000E0 }, // # PWM.Timer0Control # PWM0 output start
+ { TIMER1CONTROL, 0x000000E0 }, // # PWM.Timer1Control # PWM1 output start
+ { PWMCR, 0x00000003 }, // # PWM.PWMCR # PWM output enable
+ { 0, 1 }, // wait_ms(1);
+ { SPI_BLOCK_BASE, 0x00000799 }, // # SPI .SSICTL # SPI operation mode setting
+ { SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting
+ { SPI_BLOCK_BASE, 0x0000079b }, // # SPI .SSICTL # Set SPI active mode
+
+ { SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x00000000 }, // # SPI.SSITX
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x00000000 }, // # SPI.SSITX
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black
+ { SSITX, 0x00080036 }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Memory access control
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BB }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Display mode setup(2)
+ { SSITX, 0x0008003A }, // # Command setting of SPI block
+ { SSITX, 0x00000160 }, // # RGB Interface data format
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BF }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Drivnig method
+ { SSITX, 0x000800B1 }, // # Command setting of SPI block
+ { SSITX, 0x0000015D }, // # Booster operation setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B2 }, // # Command setting of SPI block
+ { SSITX, 0x00000133 }, // # Booster mode setup
+ { SSITX, 0x000800B3 }, // # Command setting of SPI block
+ { SSITX, 0x00000122 }, // # Booster frequencies setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B4 }, // # Command setting of SPI block
+ { SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup
+ { SSITX, 0x000800B5 }, // # Command setting of SPI block
+ { SSITX, 0x0000011F }, // # VCS Voltage adjustment (1C->1F for Rev 2)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B6 }, // # Command setting of SPI block
+ { SSITX, 0x00000128 }, // # VCOM Voltage adjustment
+ { SSITX, 0x000800B7 }, // # Command setting of SPI block
+ { SSITX, 0x00000103 }, // # Configure an external display signal
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B9 }, // # Command setting of SPI block
+ { SSITX, 0x00000120 }, // # DCCK/DCEV timing setup
+ { SSITX, 0x000800BD }, // # Command setting of SPI block
+ { SSITX, 0x00000102 }, // # ASW signal control
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BE }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation
+ { SSITX, 0x000800C0 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C1 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B)
+ { SSITX, 0x000800C2 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C3 }, // # Command setting of SPI block
+ { SSITX, 0x0008010A }, // # wait_ms(-in line clock count setup (D)
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C4 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # Seep-in line clock count setup (E)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C5 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # wait_ms(-in line clock count setup (F)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C6 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # wait_ms(-in line clock setup (G)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C7 }, // # Command setting of SPI block
+ { SSITX, 0x00080133 }, // # Gamma 1 fine tuning (1)
+ { SSITX, 0x00000143 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C8 }, // # Command setting of SPI block
+ { SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2)
+ { SSITX, 0x000800C9 }, // # Command setting of SPI block
+ { SSITX, 0x00000133 }, // # Gamma 1 inclination adjustment
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800CA }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800EC }, // # Command setting of SPI block
+ { SSITX, 0x00080102 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting]
+ { SSITX, 0x00000118 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800CF }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D0 }, // # Command setting of SPI block
+ { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x00000104 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D1 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D2 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000013A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D3 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000013A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D4 }, // # Command setting of SPI block
+ { SSITX, 0x00080124 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000016E }, //
+ { 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty
+ { SSITX, 0x000800D5 }, // # Command setting of SPI block
+ { SSITX, 0x00000124 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800ED }, // # Command setting of SPI block
+ { SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ]
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D6 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table2 for QVGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D7 }, // # Command setting of SPI block
+ { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D8 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table2 for QVGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D9 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x00000114 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800DE }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x00000114 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800DF }, // # Command setting of SPI block
+ { SSITX, 0x00080112 }, // # ASW timing control (1) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x0000013F }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E0 }, // # Command setting of SPI block
+ { SSITX, 0x0000010B }, // # ASW timing control (2) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x000800E2 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Built-in oscillator frequency division setup [Frequency division ratio : 2 (60Hq)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E3 }, // # Command setting of SPI block
+ { SSITX, 0x00000136 }, // # Built-in oscillator clock count setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E4 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV timing control for using build-in osc
+ { SSITX, 0x00000103 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E5 }, // # Command setting of SPI block
+ { SSITX, 0x00080102 }, // # OEV timing control for using build-in osc
+ { SSITX, 0x00000104 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E6 }, // # Command setting of SPI block
+ { SSITX, 0x00000103 }, // # DCEV timing control for using build-in osc
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E7 }, // # Command setting of SPI block
+ { SSITX, 0x00080104 }, // # ASW timing setup for using build-in osc(1)
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E8 }, // # Command setting of SPI block
+ { SSITX, 0x00000104 }, // # ASW timing setup for using build-in osc(2)
+
+
+ { CLKENB, 0x000001EF }, // # SYS.CLKENB # DCLK enable
+ { START, 0x00000000 }, // # LCD.START # LCDC wait_ms( mode
+ { WRSTB, 0x0000003F }, // # LCD.WRSTB # write_client_reg( strobe
+ { RDSTB, 0x00000432 }, // # LCD.RDSTB # Read strobe
+ { PORT_ENB, 0x00000002 }, // # LCD.PORT_ENB # Asynchronous port enable
+ { VSYNIF, 0x00000000 }, // # LCD.VSYNCIF # VSYNC I/F mode set
+ { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00000001 }, // # Oscillator start
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+ { 0, 10 }, // wait_ms(10);
+ { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # DUMMY write_client_reg(@*NOTE2
+ { ASY_DATB, 0x80000000 }, //
+ { ASY_DATC, 0x80000000 }, //
+ { ASY_DATD, 0x80000000 }, //
+ { ASY_CMDSET, 0x00000009 }, // # LCD.ASY_CMDSET
+ { ASY_CMDSET, 0x00000008 }, // # LCD.ASY_CMDSET
+ { ASY_DATA, 0x80000007 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00004005 }, // # LCD driver control
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+ { 0, 20 }, // wait_ms(20);
+ { ASY_DATA, 0x80000059 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00000000 }, // # LTPS I/F control
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+
+ { VSYNIF, 0x00000001 }, // # LCD.VSYNCIF # VSYNC I/F mode OFF
+ { PORT_ENB, 0x00000001 }, // # LCD.PORT_ENB # SYNC I/F output select
+
+ /******************************/
+
+ { VSYNIF, 0x00000001 }, // VSYNC I/F mode OFF
+ { PORT_ENB, 0x00000001 }, // SYNC I/F mode ON
+
+ { BITMAP1, 0x01E000F0 }, // MDC.BITMAP2 ); // Setup of PITCH size to Frame buffer1
+ { BITMAP2, 0x01E000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2
+ { BITMAP3, 0x01E000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3
+ { BITMAP4, 0x00DC00B0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4
+ { CLKENB, 0x000001EF }, // SYS.CLKENB ); // DCLK supply
+ { PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable
+ { PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active
+ { PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output)
+ { MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer
+ { HCYCLE, 0x0000010b }, // LCD.HCYCLE ); // Setup to VGA size
+ { HSW, 0x00000003 }, // LCD.HSW
+ { HDE_START, 0x00000007 }, // LCD.HDE_START
+ { HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE
+ { VCYCLE, 0x00000285 }, // LCD.VCYCLE
+ { VSW, 0x00000001 }, // LCD.VSW
+ { VDE_START, 0x00000003 }, // LCD.VDE_START
+ { VDE_SIZE, 0x0000027F }, // LCD.VDE_SIZE
+
+ { START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start
+
+ { 0, 10 }, // wait_ms( 10 );
+ { SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block
+ { SSITX, 0x00000180 }, // Display data setup
+ { SSITX, 0x0008003B }, // Command setting of SPI block
+ { SSITX, 0x00000100 }, // Quad Data configuration - VGA
+ { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
+ { SSITX, 0x000800B0 }, // Command setting of SPI block
+ { SSITX, 0x00000116 }, // Power supply ON/OFF control
+ { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
+ { SSITX, 0x000800B8 }, // Command setting of SPI block
+ { SSITX, 0x000801FF }, // Output control
+ { SSITX, 0x000001F5 },
+ { 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty
+ { SSITX, 0x00000011 }, // wait_ms(-out (Command only)
+ { SSITX, 0x00000029 }, // Display on (Command only)
+
+ { SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO
+
+ { 0, 0 }
+};
+
+static void _panel_init(struct init_table *init_table)
+{
+ unsigned n;
+
+ dprintf(INFO, "panel_init()\n");
+
+ n = 0;
+ while (init_table[n].reg != 0 || init_table[n].val != 0) {
+ if (init_table[n].reg != 0)
+ mddi_remote_write(init_table[n].val, init_table[n].reg);
+ else
+ thread_sleep(init_table[n].val);//mdelay(init_table[n].val);
+ n++;
+ }
+
+ dprintf(INFO, "panel_init() done\n");
+}
+
+void panel_init(struct mddi_client_caps *client_caps)
+{
+ switch(client_caps->manufacturer_name) {
+ case 0xd263: // Toshiba
+ dprintf(INFO, "Found Toshiba panel\n");
+ _panel_init(toshiba_480x640_init_table);
+ break;
+ case 0x4474: //??
+ if (client_caps->product_code == 0xc065)
+ dprintf(INFO, "Found WVGA panel\n");
+ break;
+ }
+}
+
+void panel_poweron(void)
+{
+ gpio_set(88, 0);
+ gpio_config(88, GPIO_OUTPUT);
+ thread_sleep(1); //udelay(10);
+ gpio_set(88, 1);
+ thread_sleep(10); //mdelay(10);
+
+ //mdelay(1000); // uncomment for second stage boot
+}
+
+void panel_backlight(int on)
+{}
diff --git a/target/msm7627_surf/rules.mk b/target/msm7627_surf/rules.mk
new file mode 100755
index 0000000..67f7b00
--- /dev/null
+++ b/target/msm7627_surf/rules.mk
@@ -0,0 +1,39 @@
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+INCLUDES += -I$(LOCAL_DIR)/include
+
+PLATFORM := msm7k
+
+MEMBASE := 0x00000000 # SMI
+MEMSIZE := 0x00800000 # 8MB
+
+LINUX_MACHTYPE := 1007014
+
+BASE_ADDR := 0x00200000
+
+TAGS_ADDR := BASE_ADDR+0x00000100
+KERNEL_ADDR := BASE_ADDR+0x00008000
+RAMDISK_ADDR := BASE_ADDR+0x01000000
+SCRATCH_ADDR := BASE_ADDR+0x02008000
+
+KEYS_USE_GPIO_KEYPAD := 1
+
+MODULES += \
+ dev/keys \
+ lib/ptable
+
+DEFINES += \
+ SDRAM_SIZE=$(MEMSIZE) \
+ MEMBASE=$(MEMBASE) \
+ LINUX_MACHTYPE=$(LINUX_MACHTYPE) \
+ BASE_ADDR=$(BASE_ADDR) \
+ TAGS_ADDR=$(TAGS_ADDR) \
+ KERNEL_ADDR=$(KERNEL_ADDR) \
+ RAMDISK_ADDR=$(RAMDISK_ADDR) \
+ SCRATCH_ADDR=$(SCRATCH_ADDR)
+
+
+OBJS += \
+ $(LOCAL_DIR)/init.o \
+ $(LOCAL_DIR)/keypad.o \
+ $(LOCAL_DIR)/panel.o
diff --git a/target/msm7630_surf/init.c b/target/msm7630_surf/init.c
new file mode 100644
index 0000000..16991ce
--- /dev/null
+++ b/target/msm7630_surf/init.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+#include <lib/ptable.h>
+#include <dev/flash.h>
+
+static struct ptable flash_ptable;
+
+/* for these partitions, start will be offset by either what we get from
+ * smem, or from the above offset if smem is not useful. Also, we should
+ * probably have smem_ptable code populate our flash_ptable.
+ *
+ * When smem provides us with a full partition table, we can get rid of
+ * this altogether.
+ *
+ */
+static struct ptentry board_part_list[] = {
+ {
+ .start = 0,
+ .length = 40,
+ .name = "boot",
+ },
+ {
+ .start = 56,
+ .length = 608 /* 76MB */,
+ .name = "system",
+ },
+ {
+ .start = 664,
+ .length = 608 /* 76MB */,
+ .name = "cache",
+ },
+ {
+ .start = 1272,
+ .length = 0,
+ .name = "userdata",
+ },
+};
+static int num_parts = sizeof(board_part_list)/sizeof(struct ptentry);
+
+void smem_ptable_init(void);
+unsigned smem_get_apps_flash_start(void);
+
+void keypad_init(void);
+
+void target_init(void)
+{
+ unsigned offset;
+ struct flash_info *flash_info;
+ int i;
+
+ dprintf(INFO, "target_init()\n");
+
+ keys_init();
+ keypad_init();
+
+ ptable_init(&flash_ptable);
+ smem_ptable_init();
+
+ flash_init();
+ flash_info = flash_get_info();
+ ASSERT(flash_info);
+
+ offset = smem_get_apps_flash_start();
+ if (offset == 0xffffffff)
+ while(1);
+
+ for (i = 0; i < num_parts; i++) {
+ struct ptentry *ptn = &board_part_list[i];
+ unsigned len = ptn->length;
+
+ if ((len == 0) && (i == num_parts - 1))
+ len = flash_info->num_blocks - offset - ptn->start;
+ ptable_add(&flash_ptable, ptn->name, offset + ptn->start,
+ len, ptn->flags);
+ }
+
+ ptable_dump(&flash_ptable);
+ flash_set_ptable(&flash_ptable);
+}
diff --git a/target/msm7630_surf/keypad.c b/target/msm7630_surf/keypad.c
new file mode 100644
index 0000000..f44032f
--- /dev/null
+++ b/target/msm7630_surf/keypad.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+
+#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
+
+/* don't turn this on without updating the ffa support */
+#define SCAN_FUNCTION_KEYS 0
+
+static unsigned int halibut_row_gpios[] = {
+ 31, 32, 33, 34, 35, 41
+#if SCAN_FUNCTION_KEYS
+ , 42
+#endif
+};
+
+static unsigned int halibut_col_gpios[] = { 36, 37, 38, 39, 40 };
+
+#define KEYMAP_INDEX(row, col) ((row)*ARRAY_SIZE(halibut_col_gpios) + (col))
+
+static const unsigned short halibut_keymap[ARRAY_SIZE(halibut_col_gpios) * ARRAY_SIZE(halibut_row_gpios)] = {
+ [KEYMAP_INDEX(0, 0)] = KEY_5,
+ [KEYMAP_INDEX(0, 1)] = KEY_9,
+ [KEYMAP_INDEX(0, 2)] = KEY_SOFT1,
+ [KEYMAP_INDEX(0, 3)] = KEY_6,
+ [KEYMAP_INDEX(0, 4)] = KEY_LEFT,
+
+ [KEYMAP_INDEX(1, 0)] = KEY_0,
+ [KEYMAP_INDEX(1, 1)] = KEY_RIGHT,
+ [KEYMAP_INDEX(1, 2)] = KEY_1,
+ [KEYMAP_INDEX(1, 3)] = KEY_SHARP,
+ [KEYMAP_INDEX(1, 4)] = KEY_SEND,
+
+ [KEYMAP_INDEX(2, 0)] = KEY_VOLUMEUP,
+ [KEYMAP_INDEX(2, 1)] = KEY_HOME, /* FA */
+ [KEYMAP_INDEX(2, 2)] = KEY_F8, /* QCHT */
+ [KEYMAP_INDEX(2, 3)] = KEY_F6, /* R+ */
+ [KEYMAP_INDEX(2, 4)] = KEY_F7, /* R- */
+
+ [KEYMAP_INDEX(3, 0)] = KEY_UP,
+ [KEYMAP_INDEX(3, 1)] = KEY_CLEAR,
+ [KEYMAP_INDEX(3, 2)] = KEY_4,
+ [KEYMAP_INDEX(3, 3)] = KEY_MUTE, /* SPKR */
+ [KEYMAP_INDEX(3, 4)] = KEY_2,
+
+ [KEYMAP_INDEX(4, 0)] = KEY_SOFT2, /* SOFT2 */
+ [KEYMAP_INDEX(4, 1)] = KEY_CENTER, /* KEY_CENTER */
+ [KEYMAP_INDEX(4, 2)] = KEY_DOWN,
+ [KEYMAP_INDEX(4, 3)] = KEY_BACK, /* FB */
+ [KEYMAP_INDEX(4, 4)] = KEY_8,
+
+ [KEYMAP_INDEX(5, 0)] = KEY_VOLUMEDOWN,
+ [KEYMAP_INDEX(5, 1)] = KEY_STAR, /* KEY_STAR */
+ [KEYMAP_INDEX(5, 2)] = KEY_MAIL, /* MESG */
+ [KEYMAP_INDEX(5, 3)] = KEY_3,
+ [KEYMAP_INDEX(5, 4)] = KEY_7,
+
+#if SCAN_FUNCTION_KEYS
+ [KEYMAP_INDEX(6, 0)] = KEY_F5,
+ [KEYMAP_INDEX(6, 1)] = KEY_F4,
+ [KEYMAP_INDEX(6, 2)] = KEY_F3,
+ [KEYMAP_INDEX(6, 3)] = KEY_F2,
+ [KEYMAP_INDEX(6, 4)] = KEY_F1
+#endif
+};
+
+static struct gpio_keypad_info halibut_keypad_info = {
+ .keymap = halibut_keymap,
+ .output_gpios = halibut_row_gpios,
+ .input_gpios = halibut_col_gpios,
+ .noutputs = ARRAY_SIZE(halibut_row_gpios),
+ .ninputs = ARRAY_SIZE(halibut_col_gpios),
+ .settle_time = 5 /* msec */,
+ .poll_time = 20 /* msec */,
+ .flags = GPIOKPF_DRIVE_INACTIVE,
+};
+
+void keypad_init(void)
+{
+ gpio_keypad_init(&halibut_keypad_info);
+}
diff --git a/target/msm7630_surf/panel.c b/target/msm7630_surf/panel.c
new file mode 100644
index 0000000..c2b56a1
--- /dev/null
+++ b/target/msm7630_surf/panel.c
@@ -0,0 +1,471 @@
+/* Copyright 2007, Google Inc. */
+
+#include <debug.h>
+#include <dev/gpio.h>
+#include <kernel/thread.h>
+#include <platform/mddi.h>
+
+#define MDDI_CLIENT_CORE_BASE 0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE 0x120000
+#define I2C_BLOCK_BASE 0x130000
+#define PWM_BLOCK_BASE 0x140000
+#define GPIO_BLOCK_BASE 0x150000
+#define SYSTEM_BLOCK1_BASE 0x160000
+#define SYSTEM_BLOCK2_BASE 0x170000
+
+
+#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
+#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
+#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
+#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
+#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
+#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
+#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
+#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
+#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
+#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
+#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
+#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
+#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
+#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
+#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
+#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
+#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
+#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
+#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
+#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
+#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
+#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
+
+
+#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
+#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
+#define START (LCD_CONTROL_BLOCK_BASE|0x08)
+#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
+#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
+#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
+#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
+#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
+#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
+#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
+
+#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
+#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
+#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
+#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
+#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
+#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
+#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
+#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
+#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
+#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
+#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
+#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
+#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
+#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
+#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
+#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
+#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
+#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
+#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
+
+#define MONI (LCD_CONTROL_BLOCK_BASE|0xB0)
+
+#define Current (LCD_CONTROL_BLOCK_BASE|0xC0)
+#define LCD (LCD_CONTROL_BLOCK_BASE|0xC4)
+#define COMMAND (LCD_CONTROL_BLOCK_BASE|0xC8)
+
+
+#define SSICTL (SPI_BLOCK_BASE|0x00)
+#define SSITIME (SPI_BLOCK_BASE|0x04)
+#define SSITX (SPI_BLOCK_BASE|0x08)
+#define SSIRX (SPI_BLOCK_BASE|0x0C)
+#define SSIINTC (SPI_BLOCK_BASE|0x10)
+#define SSIINTS (SPI_BLOCK_BASE|0x14)
+#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
+#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
+#define SSIID (SPI_BLOCK_BASE|0x20)
+
+
+#define I2CSETUP (I2C_BLOCK_BASE|0x00)
+#define I2CCTRL (I2C_BLOCK_BASE|0x04)
+
+
+#define TIMER0LOAD (PWM_BLOCK_BASE|0x00)
+#define TIMER0VALUE (PWM_BLOCK_BASE|0x04)
+#define TIMER0CONTROL (PWM_BLOCK_BASE|0x08)
+#define TIMER0INTCLR (PWM_BLOCK_BASE|0x0C)
+#define TIMER0RIS (PWM_BLOCK_BASE|0x10)
+#define TIMER0MIS (PWM_BLOCK_BASE|0x14)
+#define TIMER0BGLOAD (PWM_BLOCK_BASE|0x18)
+#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
+#define TIMER1LOAD (PWM_BLOCK_BASE|0x20)
+#define TIMER1VALUE (PWM_BLOCK_BASE|0x24)
+#define TIMER1CONTROL (PWM_BLOCK_BASE|0x28)
+#define TIMER1INTCLR (PWM_BLOCK_BASE|0x2C)
+#define TIMER1RIS (PWM_BLOCK_BASE|0x30)
+#define TIMER1MIS (PWM_BLOCK_BASE|0x34)
+#define TIMER1BGLOAD (PWM_BLOCK_BASE|0x38)
+#define PWM1OFF (PWM_BLOCK_BASE|0x3C)
+#define TIMERITCR (PWM_BLOCK_BASE|0x60)
+#define TIMERITOP (PWM_BLOCK_BASE|0x64)
+#define PWMCR (PWM_BLOCK_BASE|0x68)
+#define PWMID (PWM_BLOCK_BASE|0x6C)
+#define PWMMON (PWM_BLOCK_BASE|0x70)
+
+
+#define GPIODATA (GPIO_BLOCK_BASE|0x00)
+#define GPIODIR (GPIO_BLOCK_BASE|0x04)
+#define GPIOIS (GPIO_BLOCK_BASE|0x08)
+#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
+#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
+#define GPIOIE (GPIO_BLOCK_BASE|0x14)
+#define GPIORIS (GPIO_BLOCK_BASE|0x18)
+#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
+#define GPIOIC (GPIO_BLOCK_BASE|0x20)
+#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
+#define GPIOPC (GPIO_BLOCK_BASE|0x28)
+
+#define GPIOID (GPIO_BLOCK_BASE|0x30)
+
+
+#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
+#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
+#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
+#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
+#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
+
+struct init_table {
+ unsigned int reg;
+ unsigned int val;
+};
+
+static struct init_table toshiba_480x640_init_table[] = {
+ { DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters
+ { DPSET1, 0x00000113 }, // # MDC.DPSET1
+ { DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable
+ { DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL
+ { 0, 14 }, // wait_ms(14);
+ { SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output
+ { CLKENB, 0x000000EF }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK)
+ { GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0
+ { GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output)
+ { SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control
+ { GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut
+ { SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment
+ { GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO
+ { GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO
+ { GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear
+ { GPIO_BLOCK_BASE, 0x00060006 }, // # GPI .GPIODATA # Release LCDD reset
+ { GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply
+ { GPIO_BLOCK_BASE, 0x02000200 }, // # GPI .GPIODATA # TEST LED ON
+ { DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up
+ { TIMER0CONTROL, 0x00000060 }, // # PWM.Timer0Control # PWM0 output stop
+ { PWM_BLOCK_BASE, 0x00001388 }, // # PWM.Timer0Load # PWM0 10kHz , Duty 99 (BackLight OFF)
+ //{PWM0OFF, 0x00000001 }, // # PWM.PWM0OFF
+#if 0
+ { PWM0OFF, 0x00001387 }, // SURF 100% backlight
+ { PWM0OFF, 0x00000000 }, // FFA 100% backlight
+#endif
+ { PWM0OFF, 0x000009C3 }, // 50% BL
+ { TIMER1CONTROL, 0x00000060 }, // # PWM.Timer1Control # PWM1 output stop
+ { TIMER1LOAD, 0x00001388 }, // # PWM.Timer1Load # PWM1 10kHz , Duty 99 (BackLight OFF)
+ //{PWM1OFF, 0x00000001 }, // # PWM.PWM1OFF
+ { PWM1OFF, 0x00001387 },
+ { TIMER0CONTROL, 0x000000E0 }, // # PWM.Timer0Control # PWM0 output start
+ { TIMER1CONTROL, 0x000000E0 }, // # PWM.Timer1Control # PWM1 output start
+ { PWMCR, 0x00000003 }, // # PWM.PWMCR # PWM output enable
+ { 0, 1 }, // wait_ms(1);
+ { SPI_BLOCK_BASE, 0x00000799 }, // # SPI .SSICTL # SPI operation mode setting
+ { SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting
+ { SPI_BLOCK_BASE, 0x0000079b }, // # SPI .SSICTL # Set SPI active mode
+
+ { SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x00000000 }, // # SPI.SSITX
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x00000000 }, // # SPI.SSITX
+ { 0, 1 }, // wait_ms(1);
+ { SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black
+ { SSITX, 0x00080036 }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Memory access control
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BB }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Display mode setup(2)
+ { SSITX, 0x0008003A }, // # Command setting of SPI block
+ { SSITX, 0x00000160 }, // # RGB Interface data format
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BF }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Drivnig method
+ { SSITX, 0x000800B1 }, // # Command setting of SPI block
+ { SSITX, 0x0000015D }, // # Booster operation setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B2 }, // # Command setting of SPI block
+ { SSITX, 0x00000133 }, // # Booster mode setup
+ { SSITX, 0x000800B3 }, // # Command setting of SPI block
+ { SSITX, 0x00000122 }, // # Booster frequencies setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B4 }, // # Command setting of SPI block
+ { SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup
+ { SSITX, 0x000800B5 }, // # Command setting of SPI block
+ { SSITX, 0x0000011F }, // # VCS Voltage adjustment (1C->1F for Rev 2)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B6 }, // # Command setting of SPI block
+ { SSITX, 0x00000128 }, // # VCOM Voltage adjustment
+ { SSITX, 0x000800B7 }, // # Command setting of SPI block
+ { SSITX, 0x00000103 }, // # Configure an external display signal
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800B9 }, // # Command setting of SPI block
+ { SSITX, 0x00000120 }, // # DCCK/DCEV timing setup
+ { SSITX, 0x000800BD }, // # Command setting of SPI block
+ { SSITX, 0x00000102 }, // # ASW signal control
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800BE }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation
+ { SSITX, 0x000800C0 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C1 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B)
+ { SSITX, 0x000800C2 }, // # Command setting of SPI block
+ { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C3 }, // # Command setting of SPI block
+ { SSITX, 0x0008010A }, // # wait_ms(-in line clock count setup (D)
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C4 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # Seep-in line clock count setup (E)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C5 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # wait_ms(-in line clock count setup (F)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C6 }, // # Command setting of SPI block
+ { SSITX, 0x00080160 }, // # wait_ms(-in line clock setup (G)
+ { SSITX, 0x00000160 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C7 }, // # Command setting of SPI block
+ { SSITX, 0x00080133 }, // # Gamma 1 fine tuning (1)
+ { SSITX, 0x00000143 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800C8 }, // # Command setting of SPI block
+ { SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2)
+ { SSITX, 0x000800C9 }, // # Command setting of SPI block
+ { SSITX, 0x00000133 }, // # Gamma 1 inclination adjustment
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800CA }, // # Command setting of SPI block
+ { SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800EC }, // # Command setting of SPI block
+ { SSITX, 0x00080102 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting]
+ { SSITX, 0x00000118 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800CF }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D0 }, // # Command setting of SPI block
+ { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x00000104 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D1 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D2 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000013A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D3 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000013A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D4 }, // # Command setting of SPI block
+ { SSITX, 0x00080124 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA]
+ { SSITX, 0x0000016E }, //
+ { 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty
+ { SSITX, 0x000800D5 }, // # Command setting of SPI block
+ { SSITX, 0x00000124 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800ED }, // # Command setting of SPI block
+ { SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ]
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D6 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table2 for QVGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D7 }, // # Command setting of SPI block
+ { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D8 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table2 for QVGA]
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800D9 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x00000114 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800DE }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x00000114 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800DF }, // # Command setting of SPI block
+ { SSITX, 0x00080112 }, // # ASW timing control (1) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x0000013F }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E0 }, // # Command setting of SPI block
+ { SSITX, 0x0000010B }, // # ASW timing control (2) [PCLK Sync. Table2 for QVGA]
+ { SSITX, 0x000800E2 }, // # Command setting of SPI block
+ { SSITX, 0x00000101 }, // # Built-in oscillator frequency division setup [Frequency division ratio : 2 (60Hq)
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E3 }, // # Command setting of SPI block
+ { SSITX, 0x00000136 }, // # Built-in oscillator clock count setup
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E4 }, // # Command setting of SPI block
+ { SSITX, 0x00080100 }, // # CKV timing control for using build-in osc
+ { SSITX, 0x00000103 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E5 }, // # Command setting of SPI block
+ { SSITX, 0x00080102 }, // # OEV timing control for using build-in osc
+ { SSITX, 0x00000104 }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E6 }, // # Command setting of SPI block
+ { SSITX, 0x00000103 }, // # DCEV timing control for using build-in osc
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E7 }, // # Command setting of SPI block
+ { SSITX, 0x00080104 }, // # ASW timing setup for using build-in osc(1)
+ { SSITX, 0x0000010A }, //
+ { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
+ { SSITX, 0x000800E8 }, // # Command setting of SPI block
+ { SSITX, 0x00000104 }, // # ASW timing setup for using build-in osc(2)
+
+
+ { CLKENB, 0x000001EF }, // # SYS.CLKENB # DCLK enable
+ { START, 0x00000000 }, // # LCD.START # LCDC wait_ms( mode
+ { WRSTB, 0x0000003F }, // # LCD.WRSTB # write_client_reg( strobe
+ { RDSTB, 0x00000432 }, // # LCD.RDSTB # Read strobe
+ { PORT_ENB, 0x00000002 }, // # LCD.PORT_ENB # Asynchronous port enable
+ { VSYNIF, 0x00000000 }, // # LCD.VSYNCIF # VSYNC I/F mode set
+ { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00000001 }, // # Oscillator start
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+ { 0, 10 }, // wait_ms(10);
+ { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # DUMMY write_client_reg(@*NOTE2
+ { ASY_DATB, 0x80000000 }, //
+ { ASY_DATC, 0x80000000 }, //
+ { ASY_DATD, 0x80000000 }, //
+ { ASY_CMDSET, 0x00000009 }, // # LCD.ASY_CMDSET
+ { ASY_CMDSET, 0x00000008 }, // # LCD.ASY_CMDSET
+ { ASY_DATA, 0x80000007 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00004005 }, // # LCD driver control
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+ { 0, 20 }, // wait_ms(20);
+ { ASY_DATA, 0x80000059 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
+ { ASY_DATB, 0x00000000 }, // # LTPS I/F control
+ { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
+ { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
+
+ { VSYNIF, 0x00000001 }, // # LCD.VSYNCIF # VSYNC I/F mode OFF
+ { PORT_ENB, 0x00000001 }, // # LCD.PORT_ENB # SYNC I/F output select
+
+ /******************************/
+
+ { VSYNIF, 0x00000001 }, // VSYNC I/F mode OFF
+ { PORT_ENB, 0x00000001 }, // SYNC I/F mode ON
+
+ { BITMAP1, 0x01E000F0 }, // MDC.BITMAP2 ); // Setup of PITCH size to Frame buffer1
+ { BITMAP2, 0x01E000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2
+ { BITMAP3, 0x01E000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3
+ { BITMAP4, 0x00DC00B0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4
+ { CLKENB, 0x000001EF }, // SYS.CLKENB ); // DCLK supply
+ { PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable
+ { PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active
+ { PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output)
+ { MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer
+ { HCYCLE, 0x0000010b }, // LCD.HCYCLE ); // Setup to VGA size
+ { HSW, 0x00000003 }, // LCD.HSW
+ { HDE_START, 0x00000007 }, // LCD.HDE_START
+ { HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE
+ { VCYCLE, 0x00000285 }, // LCD.VCYCLE
+ { VSW, 0x00000001 }, // LCD.VSW
+ { VDE_START, 0x00000003 }, // LCD.VDE_START
+ { VDE_SIZE, 0x0000027F }, // LCD.VDE_SIZE
+
+ { START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start
+
+ { 0, 10 }, // wait_ms( 10 );
+ { SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block
+ { SSITX, 0x00000180 }, // Display data setup
+ { SSITX, 0x0008003B }, // Command setting of SPI block
+ { SSITX, 0x00000100 }, // Quad Data configuration - VGA
+ { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
+ { SSITX, 0x000800B0 }, // Command setting of SPI block
+ { SSITX, 0x00000116 }, // Power supply ON/OFF control
+ { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
+ { SSITX, 0x000800B8 }, // Command setting of SPI block
+ { SSITX, 0x000801FF }, // Output control
+ { SSITX, 0x000001F5 },
+ { 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty
+ { SSITX, 0x00000011 }, // wait_ms(-out (Command only)
+ { SSITX, 0x00000029 }, // Display on (Command only)
+
+ { SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO
+
+ { 0, 0 }
+};
+
+static void _panel_init(struct init_table *init_table)
+{
+ unsigned n;
+
+ dprintf(INFO, "panel_init()\n");
+
+ n = 0;
+ while (init_table[n].reg != 0 || init_table[n].val != 0) {
+ if (init_table[n].reg != 0)
+ mddi_remote_write(init_table[n].val, init_table[n].reg);
+ else
+ thread_sleep(init_table[n].val);//mdelay(init_table[n].val);
+ n++;
+ }
+
+ dprintf(INFO, "panel_init() done\n");
+}
+
+void panel_init(struct mddi_client_caps *client_caps)
+{
+ switch(client_caps->manufacturer_name) {
+ case 0xd263: // Toshiba
+ dprintf(INFO, "Found Toshiba panel\n");
+ _panel_init(toshiba_480x640_init_table);
+ break;
+ case 0x4474: //??
+ if (client_caps->product_code == 0xc065)
+ dprintf(INFO, "Found WVGA panel\n");
+ break;
+ }
+}
+
+void panel_poweron(void)
+{
+ gpio_set(88, 0);
+ gpio_config(88, GPIO_OUTPUT);
+ thread_sleep(1); //udelay(10);
+ gpio_set(88, 1);
+ thread_sleep(10); //mdelay(10);
+
+ //mdelay(1000); // uncomment for second stage boot
+}
+
+void panel_backlight(int on)
+{}
diff --git a/target/msm7630_surf/rules.mk b/target/msm7630_surf/rules.mk
new file mode 100755
index 0000000..0c80de1
--- /dev/null
+++ b/target/msm7630_surf/rules.mk
@@ -0,0 +1,39 @@
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+INCLUDES += -I$(LOCAL_DIR)/include
+
+PLATFORM := msm7k
+
+MEMBASE := 0x00000000 # SMI
+MEMSIZE := 0x00800000 # 8MB
+
+LINUX_MACHTYPE := 1007016
+
+BASE_ADDR := 0x00200000
+
+TAGS_ADDR := BASE_ADDR+0x00000100
+KERNEL_ADDR := BASE_ADDR+0x00008000
+RAMDISK_ADDR := BASE_ADDR+0x01000000
+SCRATCH_ADDR := BASE_ADDR+0x00008000
+
+KEYS_USE_GPIO_KEYPAD := 1
+
+MODULES += \
+ dev/keys \
+ lib/ptable
+
+DEFINES += \
+ SDRAM_SIZE=$(MEMSIZE) \
+ MEMBASE=$(MEMBASE) \
+ LINUX_MACHTYPE=$(LINUX_MACHTYPE) \
+ BASE_ADDR=$(BASE_ADDR) \
+ TAGS_ADDR=$(TAGS_ADDR) \
+ KERNEL_ADDR=$(KERNEL_ADDR) \
+ RAMDISK_ADDR=$(RAMDISK_ADDR) \
+ SCRATCH_ADDR=$(SCRATCH_ADDR)
+
+
+OBJS += \
+ $(LOCAL_DIR)/init.o \
+ $(LOCAL_DIR)/keypad.o \
+ $(LOCAL_DIR)/panel.o
diff --git a/target/qsd8250_surf/init.c b/target/qsd8250_surf/init.c
new file mode 100644
index 0000000..16991ce
--- /dev/null
+++ b/target/qsd8250_surf/init.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+#include <lib/ptable.h>
+#include <dev/flash.h>
+
+static struct ptable flash_ptable;
+
+/* for these partitions, start will be offset by either what we get from
+ * smem, or from the above offset if smem is not useful. Also, we should
+ * probably have smem_ptable code populate our flash_ptable.
+ *
+ * When smem provides us with a full partition table, we can get rid of
+ * this altogether.
+ *
+ */
+static struct ptentry board_part_list[] = {
+ {
+ .start = 0,
+ .length = 40,
+ .name = "boot",
+ },
+ {
+ .start = 56,
+ .length = 608 /* 76MB */,
+ .name = "system",
+ },
+ {
+ .start = 664,
+ .length = 608 /* 76MB */,
+ .name = "cache",
+ },
+ {
+ .start = 1272,
+ .length = 0,
+ .name = "userdata",
+ },
+};
+static int num_parts = sizeof(board_part_list)/sizeof(struct ptentry);
+
+void smem_ptable_init(void);
+unsigned smem_get_apps_flash_start(void);
+
+void keypad_init(void);
+
+void target_init(void)
+{
+ unsigned offset;
+ struct flash_info *flash_info;
+ int i;
+
+ dprintf(INFO, "target_init()\n");
+
+ keys_init();
+ keypad_init();
+
+ ptable_init(&flash_ptable);
+ smem_ptable_init();
+
+ flash_init();
+ flash_info = flash_get_info();
+ ASSERT(flash_info);
+
+ offset = smem_get_apps_flash_start();
+ if (offset == 0xffffffff)
+ while(1);
+
+ for (i = 0; i < num_parts; i++) {
+ struct ptentry *ptn = &board_part_list[i];
+ unsigned len = ptn->length;
+
+ if ((len == 0) && (i == num_parts - 1))
+ len = flash_info->num_blocks - offset - ptn->start;
+ ptable_add(&flash_ptable, ptn->name, offset + ptn->start,
+ len, ptn->flags);
+ }
+
+ ptable_dump(&flash_ptable);
+ flash_set_ptable(&flash_ptable);
+}
diff --git a/target/qsd8250_surf/keypad.c b/target/qsd8250_surf/keypad.c
new file mode 100644
index 0000000..f44032f
--- /dev/null
+++ b/target/qsd8250_surf/keypad.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2009, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Google, Inc. nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <dev/keys.h>
+#include <dev/gpio_keypad.h>
+
+#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
+
+/* don't turn this on without updating the ffa support */
+#define SCAN_FUNCTION_KEYS 0
+
+static unsigned int halibut_row_gpios[] = {
+ 31, 32, 33, 34, 35, 41
+#if SCAN_FUNCTION_KEYS
+ , 42
+#endif
+};
+
+static unsigned int halibut_col_gpios[] = { 36, 37, 38, 39, 40 };
+
+#define KEYMAP_INDEX(row, col) ((row)*ARRAY_SIZE(halibut_col_gpios) + (col))
+
+static const unsigned short halibut_keymap[ARRAY_SIZE(halibut_col_gpios) * ARRAY_SIZE(halibut_row_gpios)] = {
+ [KEYMAP_INDEX(0, 0)] = KEY_5,
+ [KEYMAP_INDEX(0, 1)] = KEY_9,
+ [KEYMAP_INDEX(0, 2)] = KEY_SOFT1,
+ [KEYMAP_INDEX(0, 3)] = KEY_6,
+ [KEYMAP_INDEX(0, 4)] = KEY_LEFT,
+
+ [KEYMAP_INDEX(1, 0)] = KEY_0,
+ [KEYMAP_INDEX(1, 1)] = KEY_RIGHT,
+ [KEYMAP_INDEX(1, 2)] = KEY_1,
+ [KEYMAP_INDEX(1, 3)] = KEY_SHARP,
+ [KEYMAP_INDEX(1, 4)] = KEY_SEND,
+
+ [KEYMAP_INDEX(2, 0)] = KEY_VOLUMEUP,
+ [KEYMAP_INDEX(2, 1)] = KEY_HOME, /* FA */
+ [KEYMAP_INDEX(2, 2)] = KEY_F8, /* QCHT */
+ [KEYMAP_INDEX(2, 3)] = KEY_F6, /* R+ */
+ [KEYMAP_INDEX(2, 4)] = KEY_F7, /* R- */
+
+ [KEYMAP_INDEX(3, 0)] = KEY_UP,
+ [KEYMAP_INDEX(3, 1)] = KEY_CLEAR,
+ [KEYMAP_INDEX(3, 2)] = KEY_4,
+ [KEYMAP_INDEX(3, 3)] = KEY_MUTE, /* SPKR */
+ [KEYMAP_INDEX(3, 4)] = KEY_2,
+
+ [KEYMAP_INDEX(4, 0)] = KEY_SOFT2, /* SOFT2 */
+ [KEYMAP_INDEX(4, 1)] = KEY_CENTER, /* KEY_CENTER */
+ [KEYMAP_INDEX(4, 2)] = KEY_DOWN,
+ [KEYMAP_INDEX(4, 3)] = KEY_BACK, /* FB */
+ [KEYMAP_INDEX(4, 4)] = KEY_8,
+
+ [KEYMAP_INDEX(5, 0)] = KEY_VOLUMEDOWN,
+ [KEYMAP_INDEX(5, 1)] = KEY_STAR, /* KEY_STAR */
+ [KEYMAP_INDEX(5, 2)] = KEY_MAIL, /* MESG */
+ [KEYMAP_INDEX(5, 3)] = KEY_3,
+ [KEYMAP_INDEX(5, 4)] = KEY_7,
+
+#if SCAN_FUNCTION_KEYS
+ [KEYMAP_INDEX(6, 0)] = KEY_F5,
+ [KEYMAP_INDEX(6, 1)] = KEY_F4,
+ [KEYMAP_INDEX(6, 2)] = KEY_F3,
+ [KEYMAP_INDEX(6, 3)] = KEY_F2,
+ [KEYMAP_INDEX(6, 4)] = KEY_F1
+#endif
+};
+
+static struct gpio_keypad_info halibut_keypad_info = {
+ .keymap = halibut_keymap,
+ .output_gpios = halibut_row_gpios,
+ .input_gpios = halibut_col_gpios,
+ .noutputs = ARRAY_SIZE(halibut_row_gpios),
+ .ninputs = ARRAY_SIZE(halibut_col_gpios),
+ .settle_time = 5 /* msec */,
+ .poll_time = 20 /* msec */,
+ .flags = GPIOKPF_DRIVE_INACTIVE,
+};
+
+void keypad_init(void)
+{
+ gpio_keypad_init(&halibut_keypad_info);
+}
diff --git a/target/qsd8250_surf/rules.mk b/target/qsd8250_surf/rules.mk
new file mode 100755
index 0000000..761eafc
--- /dev/null
+++ b/target/qsd8250_surf/rules.mk
@@ -0,0 +1,36 @@
+LOCAL_DIR := $(GET_LOCAL_DIR)
+
+INCLUDES += -I$(LOCAL_DIR)/include
+
+PLATFORM := qsd8k
+
+MEMBASE := 0x00000000 # SMI
+MEMSIZE := 0x00800000 # 8MB
+
+LINUX_MACHTYPE := 1008000
+
+BASE_ADDR := 0x20000000
+
+TAGS_ADDR := BASE_ADDR+0x00000100
+KERNEL_ADDR := BASE_ADDR+0x00008000
+RAMDISK_ADDR := BASE_ADDR+0x04000000
+SCRATCH_ADDR := BASE_ADDR+0x00008000
+
+KEYS_USE_GPIO_KEYPAD := 1
+
+MODULES += \
+ dev/keys \
+ lib/ptable
+
+DEFINES += \
+ SDRAM_SIZE=$(MEMSIZE) \
+ LINUX_MACHTYPE=$(LINUX_MACHTYPE) \
+ BASE_ADDR=$(BASE_ADDR) \
+ TAGS_ADDR=$(TAGS_ADDR) \
+ KERNEL_ADDR=$(KERNEL_ADDR) \
+ RAMDISK_ADDR=$(RAMDISK_ADDR) \
+ SCRATCH_ADDR=$(SCRATCH_ADDR)
+
+OBJS += \
+ $(LOCAL_DIR)/init.o \
+ $(LOCAL_DIR)/keypad.o